mx28: Split the README into a common part and a m28 specific part

Split the README into a common part and a m28 specific part.

This will make things easier when adding new README files for other mx28
based boards.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Marek Vasut <marex@denx.de>

2 files changed, 230 insertions, 215 deletions

diff --git a/doc/README.m28 b/doc/README.m28
index 548982f..7dee8ce 100644
--- a/doc/README.m28
+++ b/doc/README.m28
@@ -1,224 +1,13 @@
 DENX M28EVK
 ===========
 
-This document describes the DENX M28/M28EVK U-Boot port. This document mostly
-covers topics related to making the module/board bootable.
-
-Terminology
------------
-
-The dollar symbol ($) introduces a snipped of shell code. This shall be typed
-into the unix command prompt in U-Boot source code root directory.
-
-The (=>) introduces a snipped of code that should by typed into U-Boot command
-prompt.
-
-Contents
---------
-
-0) Files of the M28/M28EVK port
-1) Prerequisites
-2) Compiling U-Boot for M28
-3) Installation of U-Boot for M28EVK to SD card
-4) Installation of U-Boot for M28 to NAND flash
-
-0) Files of the M28/M28EVK port
--------------------------------
+Files of the M28/M28EVK port
+----------------------------
 
 arch/arm/cpu/arm926ejs/mx28/	- The CPU support code for the Freescale i.MX28
 arch/arm/include/asm/arch-mx28/	- Header files for the Freescale i.MX28
 board/denx/m28evk/		- M28EVK board specific files
 include/configs/m28evk.h	- M28EVK configuration file
 
-1) Prerequisites
-----------------
-
-To make the M28 module or the M28 module or M28EVK board bootable, some tools
-are necessary. The first one is the "elftosb" tool distributed by Freescale
-Semiconductor. The other tool is the "mxsboot" tool found in U-Boot source tree.
-
-Firstly, obtain the elftosb archive from the following location:
-
-	http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz
-
-We use a $VER variable here to denote the current version. At the time of
-writing of this document, that is "10.12.01". To obtain the file from command
-line, use:
-
-	$ VER="10.12.01"
-	$ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz
-
-Extract the file:
-
-	$ tar xzf elftosb-${VER}.tar.gz
-
-Compile the file. We need to manually tell the linker to use also libm:
-
-	$ cd elftosb-${VER}/
-	$ make LIBS="-lstdc++ -lm" elftosb
-
-Optionally, remove debugging symbols from elftosb:
-
-	$ strip bld/linux/elftosb
-
-Finally, install the "elftosb" binary. The "install" target is missing, so just
-copy the binary by hand:
-
-	$ sudo cp bld/linux/elftosb /usr/local/bin/
-
-Make sure the "elftosb" binary can be found in your $PATH, in this case this
-means "/usr/local/bin/" has to be in your $PATH.
-
-2) Compiling U-Boot for M28
----------------------------
-
-Compiling the U-Boot for M28 is straightforward and done as compiling U-Boot
-for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
-documentation. First, clean up the source code:
-
-	$ make mrproper
-
-Next, configure U-Boot for M28EVK:
-
-	$ make m28evk_config
-
-Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
-type of file, which the i.MX28 CPU can boot. This is handled by the following
-command:
-
-	$ make u-boot.sb
-
-HINT: To speed-up the build process, you can add -j<N>, where N is number of
-      compiler instances that'll run in parallel.
-
-The code produces "u-boot.sb" file. This file needs to be augmented with a
-proper header to allow successful boot from SD or NAND. Adding the header is
-discussed in the following chapters.
-
-3) Installation of U-Boot for M28EVK to SD card
------------------------------------------------
-
-To boot an M28 from SD, set the boot mode DIP switches according to i.MX28
-manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on SSP0, 3.3V.
-
-An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
-table, which in turn carries a partition of special type and which contains a
-special header. The rest of partitions in the DOS partition table can be used
-by the user.
-
-To prepare such partition, use your favourite partitioning tool. The partition
-must have the following parameters:
-
-	* Start sector .......... sector 2048
-	* Partition size ........ at least 1024 kb
-	* Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3")
-
-For example in Linux fdisk, the sequence for a clear card follows. Be sure to
-run fdisk with the option "-u=sectors" to set units to sectors:
-
-	* o ..................... create a clear partition table
-	* n ..................... create new partition
-		* p ............. primary partition
-		* 1 ............. first partition
-		* 2048 .......... first sector is 2048
-		* +1M ........... make the partition 1Mb big
-	* t 1 ................... change first partition ID
-		* 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3)
-	* <create other partitions>
-	* w ..................... write partition table to disk
-
-The partition layout is ready, next the special partition must be filled with
-proper contents. The contents is generated by running the following command (see
-chapter 2)):
-
-	$ ./tools/mxsboot sd u-boot.sb u-boot.sd
-
-The resulting file, "u-boot.sd", shall then be written to the partition. In this
-case, we assume the first partition of the SD card is /dev/mmcblk0p1:
-
-	$ dd if=u-boot.sd of=/dev/mmcblk0p1
-
-Last step is to insert the card into M28EVK and boot.
-
-NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
-      a "-p" switch for that purpose. The "-p" switch takes the sector number as
-      an argument.
-
-4) Installation of U-Boot for M28 to NAND flash
------------------------------------------------
-
-To boot an M28 from NAND, set the boot mode DIP switches according to i.MX28
-manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
-
-There are two possibilities when preparing an image writable to NAND flash.
-
-	I) The NAND wasn't written at all yet or the BCB is broken
-	----------------------------------------------------------
-	   In this case, both BCB (FCB and DBBT) and firmware needs to be
-	   written to NAND. To generate NAND image containing all these,
-	   there is a tool called "mxsboot" in the "tools/" directory. The tool
-	   is invoked on "u-boot.sb" file from chapter 2):
-
-		 $ ./tools/mxsboot nand u-boot.sb u-boot.nand
-
-	   NOTE: The above invokation works for NAND flash with geometry of
-		 2048b per page, 64b OOB data, 128kb erase size. If your chip
-		 has a different geometry, please use:
-
-		 -w <size>	change page size (default 2048 b)
-		 -o <size>	change oob size (default 64 b)
-		 -e <size>	change erase size (default 131072 b)
-
-		 The geometry information can be obtained from running U-Boot
-		 on M28 by issuing the "nand info" command.
-
-	   The resulting file, "u-boot.nand" can be written directly to NAND
-	   from the U-Boot prompt. To simplify the process, the U-Boot default
-	   environment contains script "update_nand_full" to update the system.
-
-	   This script expects a working TFTP server containing the file
-	   "u-boot.nand" in it's root directory. This can be changed by
-	   adjusting the "update_nand_full_filename" varible.
-
-	   To update the system, run the following in U-Boot prompt:
-
-		 => run update_nand_full
-
-	   In case you would only need to update the bootloader in future,
-	   see II) below.
-
-	II) The NAND was already written with a good BCB
-	------------------------------------------------
-	   This part applies after the part I) above was done at least once.
-
-	   If part I) above was done correctly already, there is no need to
-	   write the FCB and DBBT parts of NAND again. It's possible to upgrade
-	   only the bootloader image.
-
-	   To simplify the process of firmware update, the U-Boot default
-	   environment contains script "update_nand_firmware" to update only
-	   the firmware, without rewriting FCB and DBBT.
-
-	   This script expects a working TFTP server containing the file
-	   "u-boot.sb" in it's root directory. This can be changed by
-	   adjusting the "update_nand_firmware_filename" varible.
-
-	   To update the system, run the following in U-Boot prompt:
-
-		 => run update_nand_firmware
-
-	III) Special settings for the update scripts
-	--------------------------------------------
-	   There is a slight possibility of the user wanting to adjust the
-	   STRIDE and COUNT options of the NAND boot. For description of these,
-	   see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
-
-	   The update scripts take this possibility into account. In case the
-	   user changes STRIDE by blowing fuses, the user also has to change
-	   "update_nand_stride" variable. In case the user changes COUNT by
-	   blowing fuses, the user also has to change "update_nand_count"
-	   variable for the update scripts to work correctly.
-
-	   In case the user needs to boot a firmware image bigger than 1Mb, the
-	   user has to adjust the "update_nand_firmware_maxsz" variable for the
-	   update scripts to work properly.
+Follow the instructions from doc/README.mx28_common to generate a bootable SD
+card or to boot from NAND flash.
diff --git a/doc/README.mx28_common b/doc/README.mx28_common
new file mode 100644
index 0000000..448d221
--- /dev/null
+++ b/doc/README.mx28_common
@@ -0,0 +1,226 @@
+Booting U-boot on a MX28 processor
+==================================
+
+This document describes the MX28 U-Boot port. This document mostly
+covers topics related to making the module/board bootable.
+
+Terminology
+-----------
+
+The dollar symbol ($) introduces a snipped of shell code. This shall be typed
+into the unix command prompt in U-Boot source code root directory.
+
+The (=>) introduces a snipped of code that should by typed into U-Boot command
+prompt
+
+Contents
+--------
+
+1) Prerequisites
+2) Compiling U-Boot for a MX28 based board
+3) Installation of U-Boot for a MX28 based board to SD card
+
+1) Prerequisites
+----------------
+
+To make a MX28 based board bootable, some tools are necessary. The first one
+is the "elftosb" tool distributed by Freescale Semiconductor. The other one
+is the "mxsboot" tool found in U-Boot source tree.
+
+Firstly, obtain the elftosb archive from the following location:
+
+	http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz
+
+We use a $VER variable here to denote the current version. At the time of
+writing of this document, that is "10.12.01". To obtain the file from command
+line, use:
+
+	$ VER="10.12.01"
+	$ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz
+
+Extract the file:
+
+	$ tar xzf elftosb-${VER}.tar.gz
+
+Compile the file. We need to manually tell the linker to use also libm:
+
+	$ cd elftosb-${VER}/
+	$ make LIBS="-lstdc++ -lm" elftosb
+
+Optionally, remove debugging symbols from elftosb:
+
+	$ strip bld/linux/elftosb
+
+Finally, install the "elftosb" binary. The "install" target is missing, so just
+copy the binary by hand:
+
+	$ sudo cp bld/linux/elftosb /usr/local/bin/
+
+Make sure the "elftosb" binary can be found in your $PATH, in this case this
+means "/usr/local/bin/" has to be in your $PATH.
+
+2) Compiling U-Boot for a MX28 based board
+-------------------------------------------
+
+Compiling the U-Boot for a MX28 board is straightforward and done as compiling U-Boot
+for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
+documentation. First, clean up the source code:
+
+	$ make mrproper
+
+Next, configure U-Boot for a MX28 based board
+
+	$ make <mx28_based_board_name>_config
+
+Examples:
+
+1. For building U-boot for Denx M28EVK board:
+
+	$ make m28evk_config
+
+2. For building U-boot for Freescale MX28EVK board:
+
+	$ make mx28evk_config
+
+Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
+type of file, which the i.MX28 CPU can boot. This is handled by the following
+command:
+
+	$ make u-boot.sb
+
+HINT: To speed-up the build process, you can add -j<N>, where N is number of
+      compiler instances that'll run in parallel.
+
+The code produces "u-boot.sb" file. This file needs to be augmented with a
+proper header to allow successful boot from SD or NAND. Adding the header is
+discussed in the following chapters.
+
+3) Installation of U-Boot for a MX28 based board to SD card
+-----------------------------------------------------------
+
+To boot a MX28 based board from SD, set the boot mode DIP switches according
+to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on
+SSP0, 3.3V.
+
+
+An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
+table, which in turn carries a partition of special type and which contains a
+special header. The rest of partitions in the DOS partition table can be used
+by the user.
+
+To prepare such partition, use your favourite partitioning tool. The partition
+must have the following parameters:
+
+	* Start sector .......... sector 2048
+	* Partition size ........ at least 1024 kb
+	* Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3")
+
+For example in Linux fdisk, the sequence for a clear card follows. Be sure to
+run fdisk with the option "-u=sectors" to set units to sectors:
+
+	* o ..................... create a clear partition table
+	* n ..................... create new partition
+		* p ............. primary partition
+		* 1 ............. first partition
+		* 2048 .......... first sector is 2048
+		* +1M ........... make the partition 1Mb big
+	* t 1 ................... change first partition ID
+		* 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3)
+	* <create other partitions>
+	* w ..................... write partition table to disk
+
+The partition layout is ready, next the special partition must be filled with
+proper contents. The contents is generated by running the following command
+(see chapter 2)):
+
+	$ ./tools/mxsboot sd u-boot.sb u-boot.sd
+
+The resulting file, "u-boot.sd", shall then be written to the partition. In this
+case, we assume the first partition of the SD card is /dev/mmcblk0p1:
+
+	$ dd if=u-boot.sd of=/dev/mmcblk0p1
+
+Last step is to insert the card into MX28 based board and boot.
+
+NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
+      a "-p" switch for that purpose. The "-p" switch takes the sector number as
+      an argument.
+
+4) Installation of U-Boot for NAND flash
+-----------------------------------------------
+
+To boot a MX28 based board from NAND, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
+
+There are two possibilities when preparing an image writable to NAND flash.
+
+	I) The NAND wasn't written at all yet or the BCB is broken
+	----------------------------------------------------------
+	   In this case, both BCB (FCB and DBBT) and firmware needs to be
+	   written to NAND. To generate NAND image containing all these,
+	   there is a tool called "mxsboot" in the "tools/" directory. The tool
+	   is invoked on "u-boot.sb" file from chapter 2):
+
+		 $ ./tools/mxsboot nand u-boot.sb u-boot.nand
+
+	   NOTE: The above invokation works for NAND flash with geometry of
+		 2048b per page, 64b OOB data, 128kb erase size. If your chip
+		 has a different geometry, please use:
+
+		 -w <size>	change page size (default 2048 b)
+		 -o <size>	change oob size (default 64 b)
+		 -e <size>	change erase size (default 131072 b)
+
+		 The geometry information can be obtained from running U-Boot
+		 on the MX28 board by issuing the "nand info" command.
+
+	   The resulting file, "u-boot.nand" can be written directly to NAND
+	   from the U-Boot prompt. To simplify the process, the U-Boot default
+	   environment contains script "update_nand_full" to update the system.
+
+	   This script expects a working TFTP server containing the file
+	   "u-boot.nand" in it's root directory. This can be changed by
+	   adjusting the "update_nand_full_filename" varible.
+
+	   To update the system, run the following in U-Boot prompt:
+
+		 => run update_nand_full
+
+	   In case you would only need to update the bootloader in future,
+	   see II) below.
+
+	II) The NAND was already written with a good BCB
+	------------------------------------------------
+	   This part applies after the part I) above was done at least once.
+
+	   If part I) above was done correctly already, there is no need to
+	   write the FCB and DBBT parts of NAND again. It's possible to upgrade
+	   only the bootloader image.
+
+	   To simplify the process of firmware update, the U-Boot default
+	   environment contains script "update_nand_firmware" to update only
+	   the firmware, without rewriting FCB and DBBT.
+
+	   This script expects a working TFTP server containing the file
+	   "u-boot.sb" in it's root directory. This can be changed by
+	   adjusting the "update_nand_firmware_filename" varible.
+
+	   To update the system, run the following in U-Boot prompt:
+
+		 => run update_nand_firmware
+
+	III) Special settings for the update scripts
+	--------------------------------------------
+	   There is a slight possibility of the user wanting to adjust the
+	   STRIDE and COUNT options of the NAND boot. For description of these,
+	   see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
+
+	   The update scripts take this possibility into account. In case the
+	   user changes STRIDE by blowing fuses, the user also has to change
+	   "update_nand_stride" variable. In case the user changes COUNT by
+	   blowing fuses, the user also has to change "update_nand_count"
+	   variable for the update scripts to work correctly.
+
+	   In case the user needs to boot a firmware image bigger than 1Mb, the
+	   user has to adjust the "update_nand_firmware_maxsz" variable for the
+	   update scripts to work properly.