Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE

The change is currently needed to be able to remove the board
configuration scripting from the top level Makefile and replace it by
a simple, table driven script.

Moving this configuration setting into the "CONFIG_*" name space is
also desirable because it is needed if we ever should move forward to
a Kconfig driven configuration system.

Signed-off-by: Wolfgang Denk <wd@denx.de>

5 files changed, 16 insertions, 16 deletions

diff --git a/doc/README.ARM-memory-map b/doc/README.ARM-memory-map
index e2c4e16..1b120ac 100644
--- a/doc/README.ARM-memory-map
+++ b/doc/README.ARM-memory-map
@@ -9,8 +9,8 @@ To: Wolfgang Denk <wd@denx.de>
 >
 >How are they (should they be) set in your memory map above?
 
-_armboot_start contains the value of TEXT_BASE (0xA07E0000); it seems
-TEXT_BASE and _armboot_start are both used for the same purpose in
+_armboot_start contains the value of CONFIG_SYS_TEXT_BASE (0xA07E0000); it seems
+CONFIG_SYS_TEXT_BASE and _armboot_start are both used for the same purpose in
 different parts of the (ARM) code.
 Furthermore, the startup code (cpu/<arm>/start.S) internally uses
 another variable (_TEXT_BASE) with the same content as _armboot_start.
diff --git a/doc/README.COBRA5272 b/doc/README.COBRA5272
index 2d3f706..ae0f148 100644
--- a/doc/README.COBRA5272
+++ b/doc/README.COBRA5272
@@ -89,9 +89,9 @@ please first check:
 	=> u-boot as single bootloader starting from flash
 
 
-	in board/cobra5272/config.mk TEXT_BASE should be
+	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
 
-		TEXT_BASE = 0xffe00000
+		CONFIG_SYS_TEXT_BASE = 0xffe00000
 
 	=> linking address for u-boot as single bootloader stored in flash
 
@@ -128,9 +128,9 @@ please modify the settings:
 	=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
 
 
-	in board/cobra5272/config.mk TEXT_BASE should be
+	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
 
-		TEXT_BASE = 0x00020000
+		CONFIG_SYS_TEXT_BASE = 0x00020000
 
 	=> target linking address for RAM
 
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index e3ed60e..4ab3c7c 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -44,7 +44,7 @@ CONFIG_SYS_ARM_WITHOUT_RELOC defined!!!
 -------------------------------------------------------------------------------------
 
 For boards which boot from nand_spl, it is possible to save a copy
-if TEXT_BASE == relocation address! This prevents that uboot code
+if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
 is copied again in relocate_code().
 
 example for the tx25 board:
@@ -61,7 +61,7 @@ e) there it copy u-boot to CONFIG_SYS_NAND_U_BOOT_DST and
 f) u-boot code steps through board_init_f() and calculates
    the relocation address and copy itself to it
 
-If TEXT_BASE == relocation address, the copying of u-boot
+If CONFIG_SYS_TEXT_BASE == relocation address, the copying of u-boot
 in f) could be saved.
 
 -------------------------------------------------------------------------------------
@@ -71,10 +71,10 @@ ToDo:
 - fill in bd_t infos (check)
 - adapt all boards
 
-- maybe adapt TEXT_BASE (this must be checked from board maintainers)
+- maybe adapt CONFIG_SYS_TEXT_BASE (this must be checked from board maintainers)
   This *must* be done for boards, which boot from NOR flash
 
-  on other boards if TEXT_BASE = relocation baseaddr, this saves
+  on other boards if CONFIG_SYS_TEXT_BASE = relocation baseaddr, this saves
   one copying from u-boot code.
 
 - new function dram_init_banksize() is actual board specific. Maybe
@@ -88,13 +88,13 @@ Relocation with NAND_SPL (example for the tx25):
   and start with code execution on this address.
 
 - The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
-  which inits the dram, cpu registers, reloacte itself to TEXT_BASE  and loads
+  which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE  and loads
   the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
   @CONFIG_SYS_NAND_U_BOOT_START
 
 - This u-boot does no ram int, nor cpu register setup. Just looks
   where it have to relocate and relocate itself to this address.
-  If relocate address = TEXT_BASE(not the same, as the TEXT_BASE
+  If relocate address = CONFIG_SYS_TEXT_BASE(not the same, as the TEXT_BASE
   from the nand_spl code), no need to copy, just go on with bss clear
   and jump to board_init_r.
 
diff --git a/doc/README.m68k b/doc/README.m68k
index a00ab69..3766b33 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -72,7 +72,7 @@ For the preloader, please see
 http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
 
 U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
+change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
 include/configs/M5282EVB.h.
 
 3.2 BuS EB+MCF-EV123
@@ -96,7 +96,7 @@ CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
 initial vector table and basic processor initialization will not
 be compiled in. The start address of u-boot must be adjusted in
 the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
-(TEXT_BASE) to the load address.
+(CONFIG_SYS_TEXT_BASE) to the load address.
 
 4.1 MCF5272 specific Options/Settings
 -------------------------------------
diff --git a/doc/README.phytec.pcm030 b/doc/README.phytec.pcm030
index 29b7637..05faab6 100644
--- a/doc/README.phytec.pcm030
+++ b/doc/README.phytec.pcm030
@@ -5,11 +5,11 @@ pcm030_RAMBOOT_config \
 pcm030_LOWBOOT_config:	unconfig
 	@ >include/config.h
 	@[ -z "$(findstring LOWBOOT_,$@)" ] || \
-		{ echo "TEXT_BASE = 0xFF000000"	>board/phytec/pcm030/config.tmp ; \
+		{ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000"	>board/phytec/pcm030/config.tmp ; \
 		  echo "... with LOWBOOT configuration" ; \
 		}
 	@[ -z "$(findstring RAMBOOT_,$@)" ] || \
-	       { echo "TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
+	       { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
 			config.tmp ; \
 		 echo "... with RAMBOOT configuration" ; \
 		 echo "... remember to make sure that MBAR is already \