summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-01-06 08:49:58 +0100
committerAlbert ARIBAUD <albert.u.boot@aribaud.net>2014-01-06 08:49:58 +0100
commita891601ce51edbafa1a2750c96a618e4fcbca1c2 (patch)
tree9a5d44eb1fcca45dfd30557318f786b66392a8f3 /doc
parent2931fa4db349c97f882ffda42e901208654b5ca9 (diff)
parent4611d5bab26f93471b84f6f33967cef69b3f723a (diff)
downloadu-boot-imx-a891601ce51edbafa1a2750c96a618e4fcbca1c2.zip
u-boot-imx-a891601ce51edbafa1a2750c96a618e4fcbca1c2.tar.gz
u-boot-imx-a891601ce51edbafa1a2750c96a618e4fcbca1c2.tar.bz2
Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'
Conflicts: include/micrel.h The conflict above was trivial, caused by four lines being added in both branches with different whitepace.
Diffstat (limited to 'doc')
-rw-r--r--doc/README.imx676
1 files changed, 76 insertions, 0 deletions
diff --git a/doc/README.imx6 b/doc/README.imx6
index 513a06e..437af2f 100644
--- a/doc/README.imx6
+++ b/doc/README.imx6
@@ -8,3 +8,79 @@ SoC.
1.1 MAC Address: It is stored in fuse bank 4, with the 32 lsbs in word 2 and the
16 msbs in word 3.
+
+Example:
+
+For reading the MAC address fuses on a MX6Q:
+
+- The MAC address is stored in two fuse addresses (the fuse addresses are
+described in the Fusemap Descriptions table from the mx6q Reference Manual):
+
+0x620[31:0] - MAC_ADDR[31:0]
+0x630[15:0] - MAC_ADDR[47:32]
+
+In order to use the fuse API, we need to pass the bank and word values, which
+are calculated as below:
+
+Fuse address for the lower MAC address: 0x620
+Base address for the fuses: 0x400
+
+(0x620 - 0x400)/0x10 = 0x22 = 34 decimal
+
+As the fuses are arranged in banks of 8 words:
+
+34 / 8 = 4 and the remainder is 2, so in this case:
+
+bank = 4
+word = 2
+
+And the U-boot command would be:
+
+=> fuse read 4 2
+Reading bank 4:
+
+Word 0x00000002: 9f027772
+
+Doing the same for the upper MAC address:
+
+Fuse address for the upper MAC address: 0x630
+Base address for the fuses: 0x400
+
+(0x630 - 0x400)/0x10 = 0x23 = 35 decimal
+
+As the fuses are arranged in banks of 8 words:
+
+35 / 8 = 4 and the remainder is 3, so in this case:
+
+bank = 4
+word = 3
+
+And the U-boot command would be:
+
+=> fuse read 4 3
+Reading bank 4:
+
+Word 0x00000003: 00000004
+
+,which matches the ethaddr value:
+=> echo ${ethaddr}
+00:04:9f:02:77:72
+
+Some other useful hints:
+
+- The 'bank' and 'word' numbers can be easily obtained from the mx6 Reference
+Manual. For the mx6quad case, please check the "46.5 OCOTP Memory Map/Register
+Definition" from the "i.MX 6Dual/6Quad Applications Processor Reference Manual,
+Rev. 1, 04/2013" document. For example, for the MAC fuses we have:
+
+Address:
+21B_C620 Value of OTP Bank4 Word2 (MAC Address)(OCOTP_MAC0)
+
+21B_C630 Value of OTP Bank4 Word3 (MAC Address)(OCOTP_MAC1)
+
+- The command '=> fuse read 4 2 2' reads the whole MAC addresses at once:
+
+=> fuse read 4 2 2
+Reading bank 4:
+
+Word 0x00000002: 9f027772 00000004