summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorMarek Vasut <marek.vasut@gmail.com>2011-11-08 23:18:22 +0000
committerStefano Babic <sbabic@denx.de>2011-11-11 11:36:58 +0100
commitb68d57c310d4d9a5385e7b265b6f93b2fc39857e (patch)
tree581a8f2a9aef3ecd25bca5d38064d8dd3e5a3da0 /doc
parent04fe4273d3a3a6d0a0de25d6bfa91e89917d60fb (diff)
downloadu-boot-imx-b68d57c310d4d9a5385e7b265b6f93b2fc39857e.zip
u-boot-imx-b68d57c310d4d9a5385e7b265b6f93b2fc39857e.tar.gz
u-boot-imx-b68d57c310d4d9a5385e7b265b6f93b2fc39857e.tar.bz2
M28: Add doc/README.m28 documentation
Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Wolfgang Denk <wd@denx.de> Cc: Detlev Zundel <dzu@denx.de>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.m28223
1 files changed, 223 insertions, 0 deletions
diff --git a/doc/README.m28 b/doc/README.m28
new file mode 100644
index 0000000..b749ce0
--- /dev/null
+++ b/doc/README.m28
@@ -0,0 +1,223 @@
+DENX M28EVK
+===========
+
+This document describes the DENX M28/M28EVK U-Boot port. This document mostly
+covers topics related to making the module/board bootable.
+
+Terminology
+-----------
+
+The dollar symbol ($) introduces a snipped of shell code. This shall be typed
+into the unix command prompt in U-Boot source code root directory.
+
+The (=>) introduces a snipped of code that should by typed into U-Boot command
+prompt.
+
+Contents
+--------
+
+0) Files of the M28/M28EVK port
+1) Prerequisites
+2) Compiling U-Boot for M28
+3) Installation of U-Boot for M28EVK to SD card
+4) Installation of U-Boot for M28 to NAND flash
+
+0) Files of the M28/M28EVK port
+-------------------------------
+
+arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28
+board/denx/m28evk/ - M28EVK board specific files
+include/configs/m28evk.h - M28EVK configuration file
+
+1) Prerequisites
+----------------
+
+To make the M28 module or the M28 module or M28EVK board bootable, some tools
+are necessary. The first one is the "elftosb" tool distributed by Freescale
+Semiconductor. The other tool is the "mxsboot" tool found in U-Boot source tree.
+
+Firstly, obtain the elftosb archive from the following location:
+
+ http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz
+
+We use a $VER variable here to denote the current version. At the time of
+writing of this document, that is "10.12.01". To obtain the file from command
+line, use:
+
+ $ VER="10.12.01"
+ $ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz
+
+Extract the file:
+
+ $ tar xzf elftosb-${VER}.tar.gz
+
+Compile the file. We need to manually tell the linker to use also libm:
+
+ $ cd elftosb-${VER}/
+ $ make LIBS="-lstdc++ -lm" elftosb
+
+Optionally, remove debugging symbols from elftosb:
+
+ $ strip bld/linux/elftosb
+
+Finally, install the "elftosb" binary. The "install" target is missing, so just
+copy the binary by hand:
+
+ $ sudo cp bld/linux/elftosb /usr/local/bin/
+
+Make sure the "elftosb" binary can be found in your $PATH, in this case this
+means "/usr/local/bin/" has to be in your $PATH.
+
+2) Compiling U-Boot for M28
+---------------------------
+
+Compiling the U-Boot for M28 is straightforward and done as compiling U-Boot
+for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
+documentation. First, clean up the source code:
+
+ $ make mrproper
+
+Next, configure U-Boot for M28EVK:
+
+ $ make m28evk_config
+
+Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
+type of file, which the i.MX28 CPU can boot. This is handled by the following
+command:
+
+ $ make u-boot.sb
+
+HINT: To speed-up the build process, you can add -j<N>, where N is number of
+ compiler instances that'll run in parallel.
+
+The code produces "u-boot.sb" file. This file needs to be augmented with a
+proper header to allow successful boot from SD or NAND. Adding the header is
+discussed in the following chapters.
+
+3) Installation of U-Boot for M28EVK to SD card
+-----------------------------------------------
+
+To boot an M28 from SD, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on SSP0, 3.3V.
+
+An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
+table, which in turn carries a partition of special type and which contains a
+special header. The rest of partitions in the DOS partition table can be used
+by the user.
+
+To prepare such partition, use your favourite partitioning tool. The partition
+must have the following parameters:
+
+ * Start sector .......... sector 2048
+ * Partition size ........ at least 1024 kb
+ * Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3")
+
+For example in Linux fdisk, the sequence for a clear card is the following:
+
+ * o ..................... create a clear partition table
+ * n ..................... create new partition
+ * p ............. primary partition
+ * 1 ............. first partition
+ * 2048 .......... first sector is 2048
+ * +1M ........... make the partition 1Mb big
+ * t 1 ................... change first partition ID
+ * 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3)
+ * <create other partitions>
+ * w ..................... write partition table to disk
+
+The partition layout is ready, next the special partition must be filled with
+proper contents. The contents is generated by running the following command (see
+chapter 2)):
+
+ $ ./tools/mxsboot sd u-boot.sb u-boot.sd
+
+The resulting file, "u-boot.sd", shall then be written to the partition. In this
+case, we assume the first partition of the SD card is /dev/mmcblk0p1:
+
+ $ dd if=u-boot.sd of=/dev/mmcblk0p1
+
+Last step is to insert the card into M28EVK and boot.
+
+NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
+ a "-p" switch for that purpose. The "-p" switch takes the sector number as
+ an argument.
+
+4) Installation of U-Boot for M28 to NAND flash
+-----------------------------------------------
+
+To boot an M28 from NAND, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
+
+There are two possibilities when preparing an image writable to NAND flash.
+
+ I) The NAND wasn't written at all yet or the BCB is broken
+ ----------------------------------------------------------
+ In this case, both BCB (FCB and DBBT) and firmware needs to be
+ written to NAND. To generate NAND image containing all these,
+ there is a tool called "mxsboot" in the "tools/" directory. The tool
+ is invoked on "u-boot.sb" file from chapter 2):
+
+ $ ./tools/mxsboot nand u-boot.sb u-boot.nand
+
+ NOTE: The above invokation works for NAND flash with geometry of
+ 2048b per page, 64b OOB data, 128kb erase size. If your chip
+ has a different geometry, please use:
+
+ -w <size> change page size (default 2048 b)
+ -o <size> change oob size (default 64 b)
+ -e <size> change erase size (default 131072 b)
+
+ The geometry information can be obtained from running U-Boot
+ on M28 by issuing the "nand info" command.
+
+ The resulting file, "u-boot.nand" can be written directly to NAND
+ from the U-Boot prompt. To simplify the process, the U-Boot default
+ environment contains script "update_nand_full" to update the system.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.nand" in it's root directory. This can be changed by
+ adjusting the "update_nand_full_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_full
+
+ In case you would only need to update the bootloader in future,
+ see II) below.
+
+ II) The NAND was already written with a good BCB
+ ------------------------------------------------
+ This part applies after the part I) above was done at least once.
+
+ If part I) above was done correctly already, there is no need to
+ write the FCB and DBBT parts of NAND again. It's possible to upgrade
+ only the bootloader image.
+
+ To simplify the process of firmware update, the U-Boot default
+ environment contains script "update_nand_firmware" to update only
+ the firmware, without rewriting FCB and DBBT.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.sb" in it's root directory. This can be changed by
+ adjusting the "update_nand_firmware_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_firmware
+
+ III) Special settings for the update scripts
+ --------------------------------------------
+ There is a slight possibility of the user wanting to adjust the
+ STRIDE and COUNT options of the NAND boot. For description of these,
+ see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
+
+ The update scripts take this possibility into account. In case the
+ user changes STRIDE by blowing fuses, the user also has to change
+ "update_nand_stride" variable. In case the user changes COUNT by
+ blowing fuses, the user also has to change "update_nand_count"
+ variable for the update scripts to work correctly.
+
+ In case the user needs to boot a firmware image bigger than 1Mb, the
+ user has to adjust the "update_nand_firmware_maxsz" variable for the
+ update scripts to work properly.