summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorDaniel Schwierzeck <daniel.schwierzeck@googlemail.com>2011-03-28 18:33:54 +0200
committerShinya Kuribayashi <skuribay@pobox.com>2011-04-02 22:07:12 +0900
commitb38a569901a617a1249ceac15a40a2306388b139 (patch)
tree010fef8d55d7dc323e39e596b4769b8017c776aa /doc
parent67a490d60d70f2b01d55976440ba30154af96965 (diff)
downloadu-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.zip
u-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.tar.gz
u-boot-imx-b38a569901a617a1249ceac15a40a2306388b139.tar.bz2
MIPS: Purple: Remove Purple support
The Purple SoC and eval board are not actively maintained since years. This patch removes the support completely as aggreed with Wolfgang Denk. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.Purple84
1 files changed, 0 insertions, 84 deletions
diff --git a/doc/README.Purple b/doc/README.Purple
deleted file mode 100644
index 0098e26..0000000
--- a/doc/README.Purple
+++ /dev/null
@@ -1,84 +0,0 @@
-Installation Instructions:
---------------------------
-
-1. Put the s2 switch into the following position:
-
- Off On
- ------
- |x |
- | x|
- |x |
- | X|
- ------
-
- Put the s3 switch into the following position:
-
- Off On
- ------
- | x |
- | x |
- | x|
- | x|
- ------
-
- Put the s4 switch into the following position:
-
- Off On
- ------
- |x |
- |x |
- |x |
- |x |
- |x |
- | x|
- | x|
- |x |
- ------
-
-2. Connect to the serial console and to the BDI. Power on. On the
- serial line, you should see:
-
- PURPLE@1.2>
-
-3. Type '8'. No echo will be displayed. In response, you should get:
-
- 7A(pass)
-
-4. From BDI, enter command:
-
- mmw 0xb800d860 0x0042c7ff
-
-5. Then, from BDI:
-
- erase 0xB0000000
- erase 0xB0008000
- erase 0xB000C000
- erase 0xB0010000
- erase 0xB0020000
-
- prog 0xB0000000 <u-boot.bin> bin
-
-6. Power off. Restore the original S2 switch position:
-
- Off On
- ------
- | x|
- | x|
- |x |
- | X|
- ------
-
- Power on. U-Boot should come up.
-
-
-Implementation Notes:
----------------------
-
-Due to the RAM/flash bus arbitration problem the suggested workaround
-had to be implemented. It works okay. On the downside is that you
-can't really check whether 'erase' is complete by polling flash as it
-is usually done. Instead, the flash driver simply waits for a given
-time and assumes that erase then has passed. This behaviour is
-identical to what the VxWorks driver does; also, the same timeout (6
-seconds) was chosen. Note that this timeout applies for each erase
-operation, i. e. per erased sector.