summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2009-09-24 23:40:25 +0200
committerWolfgang Denk <wd@denx.de>2009-09-24 23:40:25 +0200
commit5e498dfab87c5b9bd1ad7b9a35f38b9e5dcd2244 (patch)
tree95fda77d5070e3c2e4da9b334fa4b36d5a229300 /doc
parent55f786d8ba8ce58a81428536da34a2192b9bad9f (diff)
parent39aaca1f66a0e5b1204b0789f6c0097938c00ad1 (diff)
downloadu-boot-imx-5e498dfab87c5b9bd1ad7b9a35f38b9e5dcd2244.zip
u-boot-imx-5e498dfab87c5b9bd1ad7b9a35f38b9e5dcd2244.tar.gz
u-boot-imx-5e498dfab87c5b9bd1ad7b9a35f38b9e5dcd2244.tar.bz2
Merge branch 'master' of /home/wd/git/u-boot/custodians
Diffstat (limited to 'doc')
-rw-r--r--doc/README.sbc8548189
1 files changed, 169 insertions, 20 deletions
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548
index b34d040..d72d97d 100644
--- a/doc/README.sbc8548
+++ b/doc/README.sbc8548
@@ -1,27 +1,176 @@
-Wind River SBC8548 reference board
-===========================
+Intro:
+======
-Copyright 2007, Embedded Specialties, Inc.
-Copyright 2007 Wind River Systemes, Inc.
------------------------------
+The SBC8548 is a stand alone single board computer with a 1GHz
+MPC8548 CPU, 8MB boot flash, 64MB user flash and, 256MB DDR2 400MHz
+memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e,
+and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC
+ethernet connections.
-1. Building U-Boot
-------------------
-The SBC8548 code is known to build using ELDK 4.1.
+U-boot Configuration:
+=====================
- $ make sbc8548_config
- Configuring for sbc8548 board...
+The following possible u-boot configuration targets are available:
- $ make
+ 1) sbc8548_config
+ 2) sbc8548_PCI_33_config
+ 3) sbc8548_PCI_66_config
+ 4) sbc8548_PCI_33_PCIE_config
+ 5) sbc8548_PCI_66_PCIE_config
+Generally speaking, most people should choose to use #5. Details
+of each choice are listed below.
-2. Switch and Jumper Settings
------------------------------
-All Jumpers & Switches are in their default positions. Please refer to
-the board documentation for details. Some settings control CPU voltages
-and settings may change with board revisions.
+Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot
+will be left empty (M66EN high), and so the board will operate with
+a base clock of 66MHz. Note that you need both PCI enabled in u-boot
+and linux in order to have functional PCI under linux.
-3. Known limitations
---------------------
-PCI:
- The code to support PCI is currently disabled and has not been verified.
+The second enables PCI support and builds for a 33MHz clock rate. Note
+that if a 33MHz 32bit card is inserted in the slot, then the whole board
+will clock down to a 33MHz base clock instead of the default 66MHz. This
+will change the baud clocks and mess up your serial console output if you
+were previously running at 66MHz. If you want to use a 33MHz PCI card,
+then you should build a U-Boot with a _PCI_33_ config and store this
+to flash prior to powering down the board and inserting the 33MHz PCI
+card. [The above discussion assumes that the SW2[1-4] has not been changed
+to reflect a different CCB:SYSCLK ratio]
+
+The third option builds PCI support in, and leaves the clocking at the
+default 66MHz. Options four and five are just repeats of option two
+and three, but with PCI-e support enabled as well.
+
+PCI output listing with an intel e1000 PCI-x and a Syskonnect SK-9Exx
+is shown below for sbc8548_PCI_66_PCIE_config. (Note that PCI-e with
+a 33MHz PCI configuration is currently untested.)
+
+ => pci 0
+ Scanning PCI devices on bus 0
+ BusDevFun VendorId DeviceId Device Class Sub-Class
+ _____________________________________________________________
+ 00.00.00 0x1057 0x0012 Processor 0x20
+ 00.01.00 0x8086 0x1026 Network controller 0x00
+ => pci 1
+ Scanning PCI devices on bus 1
+ BusDevFun VendorId DeviceId Device Class Sub-Class
+ _____________________________________________________________
+ 01.00.00 0x1957 0x0012 Processor 0x20
+ => pci 2
+ Scanning PCI devices on bus 2
+ BusDevFun VendorId DeviceId Device Class Sub-Class
+ _____________________________________________________________
+ 02.00.00 0x1148 0x9e00 Network controller 0x00
+ =>
+
+
+Hardware Reference:
+===================
+
+The following contains some summary information on hardware settings
+that are relevant to u-boot, based on the board manual. For the
+most up to date and complete details of the board, please request the
+reference manual ERG-00327-001.pdf from www.windriver.com
+
+Boot flash:
+ intel V28F640Jx, 8192x8 (one device) at 0xff80_0000
+
+Sodimm flash:
+ intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000
+
+
+ Jumpers:
+
+Jumper Name ON OFF
+----------------------------------------------------------------
+JP12 CS0/CS6 swap see note[*] see note[*]
+
+JP13 SODIMM flash write OK writes disabled
+ write prot.
+
+JP14 HRESET/TRST joined isolated
+
+JP15 PWR ON when AC pwr use S1 for on/off
+
+JP16 Demo LEDs lit not lit
+
+JP19 PCI mode PCI PCI-X
+
+
+[*]JP12, when jumpered parallel to the SODIMM, puts the boot flash
+onto /CS0 and the SODIMM flash on /CS6 (default). When JP12
+is jumpered parallel to the LBC-SDRAM, then /CS0 is for the
+SODIMM flash and /CS6 is for the boot flash. Note that in this
+alternate setting, you also need to switch SW2.8 to ON. Currently
+u-boot doesn't support booting off the SODIMM in this alternate
+setting without manually altering BR0/OR0 and BR6/OR6 in the
+board config file appropriately.
+
+
+ Switches:
+
+The defaults are marked with a *
+
+Name Desc. ON OFF
+------------------------------------------------------------------
+S1 Pwr toggle n/a n/a
+
+SW2.1 CFG_SYS_PLL0 1 0*
+SW2.2 CFG_SYS_PLL1 1* 0
+SW2.3 CFG_SYS_PLL2 1* 0
+SW2.4 CFG_SYS_PLL3 1 0*
+SW2.5 CFG_CORE_PLL0 1* 0
+SW2.6 CFG_CORE_PLL1 1 0*
+SW2.7 CFG_CORE_PLL2 1* 0
+SW2.8 CFG_ROM_LOC1 1 0*
+
+SW3.1 CFG_HOST_AGT0 1* 0
+SW3.2 CFG_HOST_AGT1 1* 0
+SW3.3 CFG_HOST_AGT2 1* 0
+SW3.4 CFG_IO_PORTS0 1* 0
+SW3.5 CFG_IO_PORTS0 1 0*
+SW3.6 CFG_IO_PORTS0 1 0*
+
+SerDes CLK(MHz) SW5.1 SW5.2
+----------------------------------------------
+25 0 0
+100* 1 0
+125 0 1
+200 1 1
+
+SerDes CLK spread SW5.3 SW5.4
+----------------------------------------------
++/- 0.25% 0 0
+-0.50% 1 0
+-0.75% 0 1
+No Spread* 1 1
+
+SW4 settings are readable from the EPLD and are currently not used for
+any hardware settings (i.e. user configuration switches).
+
+ LEDs:
+
+Name Desc. ON OFF
+------------------------------------------------------------------
+D13 PCI/PCI-X PCI-X PCI
+D14 3.3V PWR 3.3V no power
+D15 SYSCLK 66MHz 33MHz
+
+
+ Default Memory Map:
+
+start end CS<n> width Desc.
+----------------------------------------------------------------------
+0000_0000 0fff_ffff MCS0,1 64 DDR2 (256MB)
+f000_0000 f7ff_ffff CS3,4 32 LB SDRAM (128MB)
+f800_0000 f8b0_1fff CS5 - EPLD
+fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB)
+ff80_0000 ffff_ffff CS0 8 Boot flash (8MB)
+
+The EPLD on CS5 demuxes the following devices at the following offsets:
+
+offset size width device
+--------------------------------------------------------
+0 1fff 8 7 segment display LED
+10_0000 1fff 4 user switches
+30_0000 1fff 4 HW Rev. register
+b0_0000 1fff 8 8kB EEPROM