summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2010-10-07 21:51:12 +0200
committerWolfgang Denk <wd@denx.de>2010-10-18 22:07:10 +0200
commit14d0a02a168b36e87665b8d7f42fa3e88263d26d (patch)
tree576843229c10eb3e8836dc40a12d3f6f0c26a3ce /doc
parentd24f2d321d8e78e990d100000d8efc4845c78b1c (diff)
downloadu-boot-imx-14d0a02a168b36e87665b8d7f42fa3e88263d26d.zip
u-boot-imx-14d0a02a168b36e87665b8d7f42fa3e88263d26d.tar.gz
u-boot-imx-14d0a02a168b36e87665b8d7f42fa3e88263d26d.tar.bz2
Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE
The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.ARM-memory-map4
-rw-r--r--doc/README.COBRA52728
-rw-r--r--doc/README.arm-relocation12
-rw-r--r--doc/README.m68k4
-rw-r--r--doc/README.phytec.pcm0304
5 files changed, 16 insertions, 16 deletions
diff --git a/doc/README.ARM-memory-map b/doc/README.ARM-memory-map
index e2c4e16..1b120ac 100644
--- a/doc/README.ARM-memory-map
+++ b/doc/README.ARM-memory-map
@@ -9,8 +9,8 @@ To: Wolfgang Denk <wd@denx.de>
>
>How are they (should they be) set in your memory map above?
-_armboot_start contains the value of TEXT_BASE (0xA07E0000); it seems
-TEXT_BASE and _armboot_start are both used for the same purpose in
+_armboot_start contains the value of CONFIG_SYS_TEXT_BASE (0xA07E0000); it seems
+CONFIG_SYS_TEXT_BASE and _armboot_start are both used for the same purpose in
different parts of the (ARM) code.
Furthermore, the startup code (cpu/<arm>/start.S) internally uses
another variable (_TEXT_BASE) with the same content as _armboot_start.
diff --git a/doc/README.COBRA5272 b/doc/README.COBRA5272
index 2d3f706..ae0f148 100644
--- a/doc/README.COBRA5272
+++ b/doc/README.COBRA5272
@@ -89,9 +89,9 @@ please first check:
=> u-boot as single bootloader starting from flash
- in board/cobra5272/config.mk TEXT_BASE should be
+ in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
- TEXT_BASE = 0xffe00000
+ CONFIG_SYS_TEXT_BASE = 0xffe00000
=> linking address for u-boot as single bootloader stored in flash
@@ -128,9 +128,9 @@ please modify the settings:
=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
- in board/cobra5272/config.mk TEXT_BASE should be
+ in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
- TEXT_BASE = 0x00020000
+ CONFIG_SYS_TEXT_BASE = 0x00020000
=> target linking address for RAM
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index e3ed60e..4ab3c7c 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -44,7 +44,7 @@ CONFIG_SYS_ARM_WITHOUT_RELOC defined!!!
-------------------------------------------------------------------------------------
For boards which boot from nand_spl, it is possible to save a copy
-if TEXT_BASE == relocation address! This prevents that uboot code
+if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
is copied again in relocate_code().
example for the tx25 board:
@@ -61,7 +61,7 @@ e) there it copy u-boot to CONFIG_SYS_NAND_U_BOOT_DST and
f) u-boot code steps through board_init_f() and calculates
the relocation address and copy itself to it
-If TEXT_BASE == relocation address, the copying of u-boot
+If CONFIG_SYS_TEXT_BASE == relocation address, the copying of u-boot
in f) could be saved.
-------------------------------------------------------------------------------------
@@ -71,10 +71,10 @@ ToDo:
- fill in bd_t infos (check)
- adapt all boards
-- maybe adapt TEXT_BASE (this must be checked from board maintainers)
+- maybe adapt CONFIG_SYS_TEXT_BASE (this must be checked from board maintainers)
This *must* be done for boards, which boot from NOR flash
- on other boards if TEXT_BASE = relocation baseaddr, this saves
+ on other boards if CONFIG_SYS_TEXT_BASE = relocation baseaddr, this saves
one copying from u-boot code.
- new function dram_init_banksize() is actual board specific. Maybe
@@ -88,13 +88,13 @@ Relocation with NAND_SPL (example for the tx25):
and start with code execution on this address.
- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
- which inits the dram, cpu registers, reloacte itself to TEXT_BASE and loads
+ which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
@CONFIG_SYS_NAND_U_BOOT_START
- This u-boot does no ram int, nor cpu register setup. Just looks
where it have to relocate and relocate itself to this address.
- If relocate address = TEXT_BASE(not the same, as the TEXT_BASE
+ If relocate address = CONFIG_SYS_TEXT_BASE(not the same, as the TEXT_BASE
from the nand_spl code), no need to copy, just go on with bss clear
and jump to board_init_r.
diff --git a/doc/README.m68k b/doc/README.m68k
index a00ab69..3766b33 100644
--- a/doc/README.m68k
+++ b/doc/README.m68k
@@ -72,7 +72,7 @@ For the preloader, please see
http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
+change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
include/configs/M5282EVB.h.
3.2 BuS EB+MCF-EV123
@@ -96,7 +96,7 @@ CONFIG_MONITOR_IS_IN_RAM must be defined. If it is defined the
initial vector table and basic processor initialization will not
be compiled in. The start address of u-boot must be adjusted in
the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
-(TEXT_BASE) to the load address.
+(CONFIG_SYS_TEXT_BASE) to the load address.
4.1 MCF5272 specific Options/Settings
-------------------------------------
diff --git a/doc/README.phytec.pcm030 b/doc/README.phytec.pcm030
index 29b7637..05faab6 100644
--- a/doc/README.phytec.pcm030
+++ b/doc/README.phytec.pcm030
@@ -5,11 +5,11 @@ pcm030_RAMBOOT_config \
pcm030_LOWBOOT_config: unconfig
@ >include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
+ { echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
+ { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
config.tmp ; \
echo "... with RAMBOOT configuration" ; \
echo "... remember to make sure that MBAR is already \