summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorBen Gardiner <bengardiner@nanometrics.ca>2011-04-28 06:49:47 +0000
committerWolfgang Denk <wd@denx.de>2011-05-12 23:33:32 +0200
commitf4379ceff0876f9e4c7c90796d64b6dd5351512a (patch)
tree84e9f6a3f00c3260d2237fb82ffaba7890870ac1 /doc
parent5902e8f711ee5be9d56d4fdbaf551d5c89956326 (diff)
downloadu-boot-imx-f4379ceff0876f9e4c7c90796d64b6dd5351512a.zip
u-boot-imx-f4379ceff0876f9e4c7c90796d64b6dd5351512a.tar.gz
u-boot-imx-f4379ceff0876f9e4c7c90796d64b6dd5351512a.tar.bz2
README.arm-relocation: get relocated address from bdinfo
The bdinfo command prints the relocaddr on ARM as it does on PPC. Update the debugging instructions for arm relocation to reflect this fact rather than requiring that the user rebuild the u-boot image using -DDEBUG. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Wolfgang Denk <wd@denx.de> Acked-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.arm-relocation53
1 files changed, 22 insertions, 31 deletions
diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation
index c0957c2..8bfb500 100644
--- a/doc/README.arm-relocation
+++ b/doc/README.arm-relocation
@@ -106,13 +106,9 @@ TBC
Debugging u-boot in RAM:
(example on the qong board)
-a) add in config.mk:
-
-PLATFORM_CPPFLAGS += -DDEBUG
-
-----------------
-b) start debugger
+a) start debugger
arm-linux-gdb u-boot
@@ -130,7 +126,7 @@ The target architecture is set automatically (currently arm)
-----------------
-c) connect to target
+b) connect to target
target remote bdi10:2001
@@ -141,7 +137,7 @@ Remote debugging using bdi10:2001
-----------------
-d) discard symbol-file
+c) discard symbol-file
(gdb) symbol-file
Discard symbol table from `/home/hs/celf/u-boot/u-boot'? (y or n) y
@@ -150,7 +146,7 @@ No symbol file now.
-----------------
-e) load new symbol table:
+d) load new symbol table:
(gdb) add-symbol-file u-boot 0x8ff08000
add symbol table from file "u-boot" at
@@ -167,28 +163,23 @@ Program received signal SIGSTOP, Stopped (signal).
add-symbol-file u-boot 0x8ff08000
^^^^^^^^^^
- get this address from u-boot debug printfs
-
-U-Boot 2010.06-rc2-00009-gf77b8b8-dirty (Jun 22 2010 - 09:43:46)
-
-U-Boot code: A0000000 -> A0058BAC BSS: -> A0061F10
-CPU: Freescale i.MX31 at 398 MHz
-Board: DAVE/DENX Qong
-mon: FFFFFFFF gd->monLen: 00061F10
-Top of RAM usable for U-Boot at: 90000000
-LCD panel info: 640 x 480, 16 bit/pix
-Reserving 600k for LCD Framebuffer at: 8ff6a000
-Reserving 391k for U-Boot at: 8ff08000
- ^^^^^^^^
-Reserving 1280k for malloc() at: 8fdc8000
-Reserving 24 Bytes for Board Info at: 8fdc7fe8
-Reserving 52 Bytes for Global Data at: 8fdc7fb4
-New Stack Pointer is: 8fdc7fb0
-RAM Configuration:
-Bank #0: 80000000 256 MiB
-relocation Offset is: eff08000
-mon: 00058BAC gd->monLen: 00061F10
-Now running in RAM - U-Boot at: 8ff08000
- ^^^^^^^^
+ get this address from u-boot bdinfo command
+
+ => bdinfo
+rch_number = XXXXXXXXXX
+boot_params = XXXXXXXXXX
+DRAM bank = XXXXXXXXXX
+-> start = XXXXXXXXXX
+-> size = XXXXXXXXXX
+ethaddr = XXXXXXXXXX
+ip_addr = XXXXXXXXXX
+baudrate = XXXXXXXXXX
+TLB addr = XXXXXXXXXX
+relocaddr = 0x8ff08000
+ ^^^^^^^^^^
+reloc off = XXXXXXXXXX
+irq_sp = XXXXXXXXXX
+sp start = XXXXXXXXXX
+FB base = XXXXXXXXXX
Now you can use gdb as usual :-)