summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorUma Shankar <uma.shankar@samsung.com>2012-05-25 21:22:49 +0530
committerWolfgang Denk <wd@denx.de>2012-08-09 23:48:02 +0200
commited34f34dbaf206dfe223f4bc2147d600fe1b0f58 (patch)
tree5a0f1c40bb6598e0db9d2e1b0d1b85814348ad8b /doc
parenta1596438a68921d2c9b1fdec70a720d38c85ca7d (diff)
downloadu-boot-imx-ed34f34dbaf206dfe223f4bc2147d600fe1b0f58.zip
u-boot-imx-ed34f34dbaf206dfe223f4bc2147d600fe1b0f58.tar.gz
u-boot-imx-ed34f34dbaf206dfe223f4bc2147d600fe1b0f58.tar.bz2
ext4fs write support
Signed-off-by: Uma Shankar <uma.shankar@samsung.com> Signed-off-by: Manjunatha C Achar <a.manjunatha@samsung.com> Signed-off-by: Iqbal Shareef <iqbal.ams@samsung.com> Signed-off-by: Hakgoo Lee <goodguy.lee@samsung.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.ext446
1 files changed, 46 insertions, 0 deletions
diff --git a/doc/README.ext4 b/doc/README.ext4
new file mode 100644
index 0000000..b3ea8b7
--- /dev/null
+++ b/doc/README.ext4
@@ -0,0 +1,46 @@
+This patch series adds support for ext4 ls,load and write features in uboot
+Journaling is supported for write feature.
+
+To Enable ext2 ls and load commands, modify the board specific config file with
+#define CONFIG_CMD_EXT2
+
+To Enable ext4 ls and load commands, modify the board specific config file with
+#define CONFIG_CMD_EXT4
+
+To enable ext4 write command, modify the board specific config file with
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
+
+Steps to test:
+
+1. After applying the patch, ext4 specific commands can be seen
+ in the boot loader prompt using
+ UBOOT #help
+
+ ext4load- load binary file from a Ext4 file system
+ ext4ls - list files in a directory (default /)
+ ext4write- create a file in ext4 formatted partition
+
+2. To list the files in ext4 formatted partition, execute
+ ext4ls <interface> <dev[:part]> [directory]
+ For example:
+ UBOOT #ext4ls mmc 0:5 /usr/lib
+
+3. To read and load a file from an ext4 formatted partition to RAM, execute
+ ext4load <interface> <dev[:part]> [addr] [filename] [bytes]
+ For example:
+ UBOOT #ext4load mmc 2:2 0x30007fc0 uImage
+
+4. To write a file to a ext4 formatted partition.
+ a) First load a file to RAM at a particular address for example 0x30007fc0.
+ Now execute ext4write command
+ ext4write <interface> <dev[:part]> [filename] [Address] [sizebytes]
+ For example:
+ UBOOT #ext4write mmc 2:2 /boot/uImage 0x30007fc0 6183120
+ (here 6183120 is the size of the file to be written)
+ Note: Absolute path is required for the file to be written
+
+References :
+ -- ext4 implementation in Linux Kernel
+ -- Uboot existing ext2 load and ls implementation
+ -- Journaling block device JBD2 implementation in linux Kernel