summaryrefslogtreecommitdiff
path: root/doc
diff options
context:
space:
mode:
authorpekon gupta <pekon@ti.com>2013-11-18 19:02:59 +0530
committerScott Wood <scottwood@freescale.com>2013-11-21 13:33:41 -0600
commitbeba5f04f2215c81016fbfb727257ea6667aca85 (patch)
tree9c999f376055e39af9012d5fc535763789b899c7 /doc
parentc0dc3dec697e930d290145e127a86ff31f7c2dde (diff)
downloadu-boot-imx-beba5f04f2215c81016fbfb727257ea6667aca85.zip
u-boot-imx-beba5f04f2215c81016fbfb727257ea6667aca85.tar.gz
u-boot-imx-beba5f04f2215c81016fbfb727257ea6667aca85.tar.bz2
mtd: nand: omap: make am33xx/elm.c as common driver for all OMAPx and AMxxxx platforms
ELM hardware engine which is used for ECC error detection, is present on all latest OMAP SoC (like OMAP4xxx, OMAP5xxx, DRA7xxx, AM33xx, AM43xx). Thus ELM driver should be moved to common drivers/mtd/nand/ folder so that all SoC having on-chip ELM hardware engine can re-use it. This patch has following changes: - mv arch/arm/include/asm/arch-am33xx/elm.h arch/arm/include/asm/omap_elm.h - mv arch/arm/cpu/armv7/am33xx/elm.c drivers/mtd/nand/omap_elm.c - update Makefiles - update #include <asm/elm.h> - add CONFIG_NAND_OMAP_ELM to compile driver/mtd/nand/omap_elm.c and include in all board configs using AM33xx SoC platform. Signed-off-by: Pekon Gupta <pekon@ti.com>
Diffstat (limited to 'doc')
-rw-r--r--doc/README.nand19
1 files changed, 19 insertions, 0 deletions
diff --git a/doc/README.nand b/doc/README.nand
index 3a507b6..ce7ea5e 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -179,6 +179,25 @@ Configuration Options:
Please convert your driver even if you don't need the extra
flexibility, so that one day we can eliminate the old mechanism.
+
+Platform specific options
+=========================
+ CONFIG_NAND_OMAP_GPMC
+ Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
+ GPMC controller is used for parallel NAND flash devices, and can
+ do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
+ and BCH16 ECC algorithms.
+
+ CONFIG_NAND_OMAP_ELM
+ Enables omap_elm.c driver for OMAPx and AMxxxx platforms.
+ ELM controller is used for ECC error detection (not ECC calculation)
+ of BCH4, BCH8 and BCH16 ECC algorithms.
+ Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+ thus such SoC platforms need to depend on software library for ECC error
+ detection. However ECC calculation on such plaforms would still be
+ done by GPMC controller.
+
+
NOTE:
=====