Merge branch 'master' of git://git.denx.de/u-boot-net

2 files changed, 17 insertions, 2 deletions

diff --git a/doc/README.NetConsole b/doc/README.NetConsole
index c8bcb90..af7fc60 100644
--- a/doc/README.NetConsole
+++ b/doc/README.NetConsole
@@ -6,11 +6,16 @@ serial and network input/output devices by adjusting the 'stdin' and
 set either of these variables to "nc". Input and output can be
 switched independently.
 
+CONFIG_NETCONSOLE_BUFFER_SIZE - Override the default buffer size
+
 We use an environment variable 'ncip' to set the IP address and the
 port of the destination. The format is <ip_addr>:<port>. If <port> is
 omitted, the value of 6666 is used. If the env var doesn't exist, the
 broadcast address and port 6666 are used. If it is set to an IP
 address of 0 (or 0.0.0.0) then no messages are sent to the network.
+The source / listening port can be configured separately by setting
+the 'ncinport' environment variable and the destination port can be
+configured by setting the 'ncoutport' environment variable.
 
 For example, if your server IP is 192.168.1.1, you could use:
 
diff --git a/doc/README.pxe b/doc/README.pxe
index 2bbf53d..f00f280 100644
--- a/doc/README.pxe
+++ b/doc/README.pxe
@@ -93,8 +93,13 @@ pxe boot
      be passed to the bootm command to boot the kernel. These environment
      variables are required to be set.
 
-     fdt_addr - the location of a fdt blob. If this is set, it will be passed
-     to bootm when booting a kernel.
+     fdt_addr_r - location in RAM at which 'pxe boot' will store the fdt blob it
+     retrieves from tftp. The retrieval is possible if 'fdt' label is defined in
+     pxe file and 'fdt_addr_r' is set. If retrieval is possible, 'fdt_addr_r'
+     will be passed to bootm command to boot the kernel.
+
+     fdt_addr - the location of a fdt blob. 'fdt_addr' will be passed to bootm
+     command if it is set and 'fdt_addr_r' is not passed to bootm command.
 
 pxe file format
 ===============
@@ -156,6 +161,11 @@ initrd <path>	    - if this label is chosen, use tftp to retrieve the initrd
 		      the initrd_addr_r environment variable, and that address
 		      will be passed to bootm.
 
+fdt <path>	    - if this label is chosen, use tftp to retrieve the fdt blob
+		      at <path>. it will be stored at the address indicated in
+		      the fdt_addr_r environment variable, and that address will
+		      be passed to bootm.
+
 localboot <flag>    - Run the command defined by "localcmd" in the environment.
 		      <flag> is ignored and is only here to match the syntax of
 		      PXELINUX config files.