ColdFire: Add MCF5227x cpu and M52277EVB support-1

Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>

1 files changed, 237 insertions, 0 deletions

diff --git a/doc/README.m52277evb b/doc/README.m52277evb
new file mode 100644
index 0000000..de1daba
--- /dev/null
+++ b/doc/README.m52277evb
@@ -0,0 +1,237 @@
+Freescale MCF52277EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Jan 8, 2008
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m52277evb/m52277evb.c	Dram setup
+- board/freescale/m52277evb/Makefile	Makefile
+- board/freescale/m52277evb/config.mk	config make
+- board/freescale/m52277evb/u-boot.lds	Linker description
+
+- cpu/mcf5227x/cpu.c		cpu specific code
+- cpu/mcf5227x/cpu_init.c	FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf5227x/interrupts.c	cpu specific interrupt support
+- cpu/mcf5227x/speed.c		system, flexbus, and cpu clock
+- cpu/mcf5227x/Makefile		Makefile
+- cpu/mcf5227x/config.mk	config make
+- cpu/mcf5227x/start.S		start up assembly code
+
+- doc/README.m52277evb		This readme file
+
+- drivers/serial/mcfuart.c	ColdFire common UART driver
+- drivers/rtc/mcfrtc.c		Realtime clock Driver
+
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/crossbar.h		CrossBar structure and definition
+- include/asm-m68k/dspi.h		DSPI structure and definition
+- include/asm-m68k/edma.h		eDMA structure and definition
+- include/asm-m68k/flexbus.h		FlexBus structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5227x.h	mcf5227x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/lcd.h		LCD structure and definition
+- include/asm-m68k/m5227x.h		mcf5227x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/ssi.h		SSI structure and definition
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M52277EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c			Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c			Exception init code
+
+1 MCF52277 specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in this coldfire family
+
+1.2 Configuration settings for M52277EVB Development Board
+CONFIG_MCF5227x		-- define for all MCF5227x CPUs
+CONFIG_M52277		-- define for all Freescale MCF52277 CPUs
+CONFIG_M52277EVB	-- define for M52277EVB board
+
+CONFIG_MCFUART		-- define to use common CF Uart driver
+CFG_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE		-- define UART baudrate
+
+CONFIG_MCFRTC		-- define to use common CF RTC driver
+CFG_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CFG_RTC_OSCILLATOR	-- define RTC clock frequency
+RTC_DEBUG		-- define to show RTC debug message
+CONFIG_CMD_DATE		-- enable to use date feature in u-boot
+
+CONFIG_MCFTMR		-- define to use DMA timer
+CONFIG_MCFPIT		-- define to use PIT timer
+
+CONFIG_FSL_I2C		-- define to use FSL common I2C driver
+CONFIG_HARD_I2C		-- define for I2C hardware support
+CONFIG_SOFT_I2C		-- define for I2C bit-banged
+CFG_I2C_SPEED		-- define for I2C speed
+CFG_I2C_SLAVE		-- define for I2C slave address
+CFG_I2C_OFFSET		-- define for I2C base address offset
+CFG_IMMR		-- define for MBAR offset
+
+CFG_MBAR		-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM -- Not support
+
+CFG_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
+
+CFG_CSn_BASE	-- defines the Chip Select Base register
+CFG_CSn_MASK	-- defines the Chip Select Mask register
+CFG_CSn_CTRL	-- defines the Chip Select Control register
+
+CFG_SDRAM_BASE	-- defines the DRAM Base
+
+CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
+update will be provided at later time
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0x00000000-0x3FFFFFFF (1024MB)
+	DDR:		0x40000000-0x7FFFFFFF (1024MB)
+	SRAM:		0x80000000-0x8FFFFFFF (256MB)
+	IP:		0xF0000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+	linux kernel, you can customize it based on your system requirements:
+	Flash0:		0x00000000-0x00FFFFFF (16MB)
+
+	DDR:		0x40000000-0x4FFFFFFF (64MB)
+	SRAM:		0x80000000-0x80007FFF (32KB)
+	IP:		0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot-1.x.x
+   make distclean
+   make M52277EVB_config
+   make
+
+4. SCREEN DUMP
+==============
+4.1 M52277EVB Development board
+    (NOTE: May not show exactly the same)
+
+U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
+
+CPU:   Freescale MCF52277 (Mask:6c Version:0)
+       CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
+       INP CLK 16 Mhz VCO CLK 480 Mhz
+Board: Freescale 52277 EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 16 MB
+In:    serial
+Out:   serial
+Err:   serial
+-> print
+baudrate=115200
+hostname=M52277EVB
+inpclk=16000000
+loadaddr=(0x40000000 + 0x10000)
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+u-boot=u-boot.bin
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 280/32764 bytes
+-> bdinfo
+memstart    = 0x40000000
+memsize     = 0x04000000
+flashstart  = 0x00000000
+flashsize   = 0x01000000
+flashoffset = 0x00000000
+sramstart   = 0x80000000
+sramsize    = 0x00008000
+mbar        = 0xFC000000
+busfreq     =     80 MHz
+flbfreq     =     80 Mhz
+inpfreq     =     16 Mhz
+vcofreq     =    480 Mhz
+
+baudrate    = 115200 bps
+->
+-> help
+?       - alias for 'help'
+autoscr - run script from memory
+base    - print or set address offset
+bdinfo  - print Board Info structure
+boot    - boot default, i.e., run 'bootcmd'
+bootd   - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm   - boot application image from memory
+bootp	- boot image via network using BootP/TFTP protocol
+bootvx  - Boot vxWorks from an ELF image
+cmp     - memory compare
+coninfo - print console devices and information
+cp      - memory copy
+crc32   - checksum calculation
+date    - get/set/reset date & time
+dcache  - enable or disable data cache
+echo    - echo args to console
+erase   - erase FLASH memory
+flinfo  - print FLASH memory information
+go      - start application at address 'addr'
+help    - print online help
+icache  - enable or disable instruction cache
+icrc32  - checksum calculation
+iloop   - infinite loop on address range
+imd     - i2c memory display
+iminfo  - print header information for application image
+imls    - list all images found in flash
+imm     - i2c memory modify (auto-incrementing)
+imw     - memory write (fill)
+inm     - memory modify (constant address)
+iprobe  - probe to discover valid I2C chip addresses
+itest	- return true/false on integer compare
+loadb   - load binary file over serial line (kermit mode)
+loads   - load S-Record file over serial line
+loady   - load binary file over serial line (ymodem mode)
+loop    - infinite loop on address range
+ls	- list files in a directory (default /)
+md      - memory display
+mm      - memory modify (auto-incrementing)
+mtest   - simple RAM test
+mw      - memory write (fill)
+nm      - memory modify (constant address)
+ping	- send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+protect - enable or disable FLASH write protection
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sleep   - delay execution for some time
+version - print monitor version
+->