diff options
| author | Wolfgang Denk <wd@pollux.(none)> | 2005-11-20 21:40:11 +0100 |
|---|---|---|
| committer | Wolfgang Denk <wd@pollux.(none)> | 2005-11-20 21:40:11 +0100 |
| commit | fe126d8b34d2e7c3c2dc1d4e61086018e016768c (patch) | |
| tree | cf98c7ecc453853f3d8ec4093b5db2587931905b /doc | |
| parent | 5a164c8ca909f170354ea66835b8145c930b2807 (diff) | |
| download | u-boot-imx-fe126d8b34d2e7c3c2dc1d4e61086018e016768c.zip u-boot-imx-fe126d8b34d2e7c3c2dc1d4e61086018e016768c.tar.gz u-boot-imx-fe126d8b34d2e7c3c2dc1d4e61086018e016768c.tar.bz2 | |
Change all '$(...)' variable references into '${...}'
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/README.Sandpoint8240 | 4 | ||||
| -rw-r--r-- | doc/README.dk1s10 | 4 |
2 files changed, 4 insertions, 4 deletions
diff --git a/doc/README.Sandpoint8240 b/doc/README.Sandpoint8240 index b506c01..a41b69a 100644 --- a/doc/README.Sandpoint8240 +++ b/doc/README.Sandpoint8240 @@ -253,7 +253,7 @@ bootfile=telemetry hostname=sp1 ethaddr=00:03:47:97:E4:6B load=tftp 100000 u-boot.bin -update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 $(filesize);saveenv +update=protect off all;era FFF00000 FFF3FFFF;cp.b 100000 FFF00000 ${filesize};saveenv filesize=1f304 gatewayip=145.17.228.1 netmask=255.255.255.0 @@ -308,7 +308,7 @@ Protected 1 sectors You can put these commands into some environment variables; => setenv load tftp 100000 u-boot.bin -=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \$(filesize)\;saveenv +=> setenv update protect off all\;era FFF00000 FFF3FFFF\;cp.b 100000 FFF00000 \${filesize}\;saveenv => saveenv Then you just have to type "run load" then "run update" diff --git a/doc/README.dk1s10 b/doc/README.dk1s10 index bb8375a..622bef5 100644 --- a/doc/README.dk1s10 +++ b/doc/README.dk1s10 @@ -118,11 +118,11 @@ see the following: at the Altera Standard 32 to SRAM: - ==> cp.b 800000 40000 $(filesize) + ==> cp.b 800000 40000 ${filesize} at the Microtronix LDK 2.0 to SDRAM: - ==> cp.b 1010000 8000000 $(filesize) + ==> cp.b 1010000 8000000 ${filesize} U-Boot will now automatically start when the board is powered on or reset using the Standard-32 configuration. To start U-Boot with the |