* Patch by Thomas Elste, 10 Feb 2004:

  Add support for NET+50 CPU and ModNET50 board

* Patch by Sam Song, 10 Feb 2004:
  Fix typos in cfi_flash.c

* Patch by Leon Kukovec, 10 Feb 2004
  Fixed long dir entry slot id calculation in get_vfatname

* Patch by Robin Gilks, 10 Feb 2004:
  add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==,
  !=, <>, <, >, <=, >=)

2 files changed, 78 insertions, 0 deletions

diff --git a/doc/README.commands.itest b/doc/README.commands.itest
new file mode 100644
index 0000000..db54160
--- /dev/null
+++ b/doc/README.commands.itest
@@ -0,0 +1,16 @@
+A slow day today so here is a revised itest command with provisional 
+support for comparing strings as well :-))
+
+Now table driven to allow the operators
+-eq, -ne, -lt, -gt, -le, -ge, ==, !=, <>, <, >, <=, >=
+
+Uses the expected command modifier for integer compares of width 1, 2 or 
+4 bytes of .b, .w, .l and the new modifer of .s for a string compare. 
+String comparison is over the length of the shorter, this hopefully 
+avoids missing terminators when using an indirect pointer.
+
+eg.
+if itest.l *40000 == 12345678 then; ....
+if itest.w *40000 != 1234 then; ....
+if itest.b *40000 >= 12 then; ....
+if itest.s *40000 -eq hello then; ....
diff --git a/doc/README.modnet50 b/doc/README.modnet50
new file mode 100644
index 0000000..de7165c
--- /dev/null
+++ b/doc/README.modnet50
@@ -0,0 +1,62 @@
+U-BOOT Port for FSForth ModNET50 Board
+--------------------------------------
+
+author: Thomas Elste <info@elste.org>
+        IMMS gGmbH <www.imms.de>
+
+The port based upon an early (partial complete)
+armboot-port from Stephan Linz for the ModNET50 Board.
+
+
+Overview:
+
+- board with Netsilicon NET+50 ARM7TDMI CPU without MMU
+- 16 MB SDRAM
+- 2 MB Flash (MBL29LV160BE)
+- 10/100 Ethernet PHY (LXT971A)
+
+
+Current Configuration (include/configs/modnet50.h):
+
+Memory Map: 0x00000000 - 0x00FFFFFF 16M SDRAM
+            0x10000000 - 0x101FFFFF  2M Flash
+
+The Flash uses a BB-Architectur with 35 sectors
+(0:16K; 1,2:8K; 3:32K; 4-34:64K). U-Boot is located in
+the first 5 sectors.
+
+The environment is located at the end of the 4th Flash
+sector (0x1001C000-0x1001FFFF).
+
+Build:
+
+U-boot should be build by using the ELDK Toolchain (arm-linux-*).
+
+	make modnet50_config
+	make
+
+
+Status:
+
+Everything seems to work fine. Booting images was tested by
+booting uCLinux (with and without a separate ramdisk image) from
+flash.
+
+
+Files:
+
+cpu/arm720t/serial_netarm.c .. serial I/O for the cpu
+
+board/modnet50/memsetup.S   .. memory setup for ModNET50
+board/modnet50/flash.c      .. flash routines
+board/modnet50/modnet50.c   .. some board init stuff
+
+drivers/netarm_eth.c        .. ethernet driver for the NET+50 CPU
+drivers/netarm_eth.h        .. header for ethernet driver
+
+include/configs/modnet50.h  .. configuration file for ModNET50
+
+include/netarm_*.h          .. register and macro definitions for
+                               the NETARM CPU family
+
+doc/README.modnet50         .. this readme