diff options
| author | Graeme Russ <gruss@tss-engineering.com> | 2015-01-25 12:07:52 +1100 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2015-02-10 12:48:50 +0100 |
| commit | 7a086037071401ee781425c382846dddfe80df68 (patch) | |
| tree | af1c3a2f0c7c3e631e6b49fdc5f19d387a496b30 /doc/README.x86 | |
| parent | 950eaf6230496585e72ebb965c458d35c6c7eac1 (diff) | |
| download | u-boot-imx-7a086037071401ee781425c382846dddfe80df68.zip u-boot-imx-7a086037071401ee781425c382846dddfe80df68.tar.gz u-boot-imx-7a086037071401ee781425c382846dddfe80df68.tar.bz2 | |
arm: mxs: Enable booting of mx28 without battery
Section 4.1.2 of Freescale Application Note AN4199 describes the
configuration required to operate the mx28 from a 5V source without a
battery.
This patch changes the behaviour of the dropout control of the DC-DC
converter (refer to section 11.12.9 of the mx28 Application Processor
Reference Manual - Document Number: MCIMX28RM, Rev 2, 08/2013) to the
following:
- Always use 4P2 Linear Regulator if CONFIG_SYS_MXS_VDD5V_ONLY is defined
- Switch between 4P2 Linear Regulator and Battery, using whichever has
the highest voltage if CONFIG_SYS_MXS_VDD5V_ONLY isnot set (this is
the same as the pre-patch behaviour)
Signed-off-by: Graeme Russ <gruss@tss-engineering.com>
Signed-off-by: Damien Gotfroi <dgotfroi@greenwatch.be>
Diffstat (limited to 'doc/README.x86')
0 files changed, 0 insertions, 0 deletions