summaryrefslogtreecommitdiff
path: root/doc/README.sha1
diff options
context:
space:
mode:
authorHeiko Schocher <hs@pollux.denx.de>2007-07-11 18:39:11 +0200
committerHeiko Schocher <hs@pollux.denx.de>2007-07-11 18:39:11 +0200
commit96e1d75be8193ca79e4215a368bf9d7f2362450f (patch)
treea53bd57d764d2db6b63da07d821f51c3f60d160b /doc/README.sha1
parent4ef218f6fdf8d747f4589da5252b004e7d2c2876 (diff)
downloadu-boot-imx-96e1d75be8193ca79e4215a368bf9d7f2362450f.zip
u-boot-imx-96e1d75be8193ca79e4215a368bf9d7f2362450f.tar.gz
u-boot-imx-96e1d75be8193ca79e4215a368bf9d7f2362450f.tar.bz2
[PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failed
- now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
Diffstat (limited to 'doc/README.sha1')
-rw-r--r--doc/README.sha157
1 files changed, 57 insertions, 0 deletions
diff --git a/doc/README.sha1 b/doc/README.sha1
new file mode 100644
index 0000000..92dc8ff
--- /dev/null
+++ b/doc/README.sha1
@@ -0,0 +1,57 @@
+SHA1 usage:
+-----------
+
+In the U-Boot Image for the pcs440ep board is a SHA1 checksum integrated.
+This SHA1 sum is used, to check, if the U-Boot Image in Flash is not
+corrupted.
+
+The following command is available:
+
+=> help sha1
+sha1 address len [addr] calculate the SHA1 sum [save at addr]
+ -p calculate the SHA1 sum from the U-Boot image in flash and print
+ -c check the U-Boot image in flash
+
+"sha1 -p"
+ calculates and prints the SHA1 sum, from the Image stored in Flash
+
+"sha1 -c"
+ check, if the SHA1 sum from the Image stored in Flash is correct
+
+
+It is possible to calculate a SHA1 checksum from a memoryrange with:
+
+"sha1 address len"
+
+If you want to store a new Image in Flash for the pcs440ep board,
+which has no SHA1 sum, you can do the following:
+
+a) cp the new Image on a position in RAM (here 0x300000)
+ (for this example we use the Image from Flash, stored at 0xfffa0000 and
+ 0x60000 Bytes long)
+
+"cp.b fffa0000 300000 60000"
+
+b) Initialize the SHA1 sum in the Image with 0x00
+ The SHA1 sum is stored in Flash at:
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN + SHA1_SUM_POS
+ for the pcs440ep Flash: 0xfffa0000 + 0x60000 + -0x20
+ = 0xffffffe0
+ for the example in RAM: 0x300000 + 0x60000 + -0x20
+ = 0x35ffe0
+
+ note: a SHA1 checksum is 20 bytes long.
+
+"mw.b 35ffe0 0 14"
+
+c) now calculate the SHA1 sum from the memoryrange and write
+ the calculated checksum at the right place:
+
+"sha1 300000 60000 35ffe0"
+
+Now you have a U-Boot-Image for the pcs440ep board with the correct SHA1 sum.
+
+If you do a "./MAKEALL pcs440ep" or a "make all" to get the U-Boot image,
+the correct SHA1 sum will be automagically included in the U-Boot image.
+
+Heiko Schocher, 11 Jul 2007