summaryrefslogtreecommitdiff
path: root/doc/README.sbc8548
diff options
context:
space:
mode:
authorPaul Gortmaker <paul.gortmaker@windriver.com>2011-12-30 23:53:07 -0500
committerKumar Gala <galak@kernel.crashing.org>2012-01-11 13:58:10 -0600
commit3fd673cf363bc86ed42eff713d4e3506720e91a2 (patch)
tree81c598c3b6e11409cf4f9b83d819e857ed95dbfe /doc/README.sbc8548
parentaf35be6ac962a737005737ab479da93cac2f596f (diff)
downloadu-boot-imx-3fd673cf363bc86ed42eff713d4e3506720e91a2.zip
u-boot-imx-3fd673cf363bc86ed42eff713d4e3506720e91a2.tar.gz
u-boot-imx-3fd673cf363bc86ed42eff713d4e3506720e91a2.tar.bz2
sbc8548: relocate 64MB user flash to sane boundary
The current situation has the 64MB user flash at an awkward alignment; shifted back from 0xfc00_0000 by 8M, to leave an 8MB hole for the soldered on boot flash @ EOM. But to switch to optionally supporting booting off the 64MB flash, the 64MB will then be mapped at the sane address of 0xfc00_0000. This leads to awkward things when programming the 64MB flash prior to transitioning to it -- i.e. even though the chip spans from 0xfb80_0000 to 0xff7f_ffff, you would have to program a u-boot image into the two sectors from 0xfbf0_0000 --> 0xfbff_ffff so that it was in the right place when JP12/SW2.8 were switched to make the 64MB on /CS0. (i.e. the chip is only looking at the bits in mask 0x3ff_ffff) We also have to have three TLB entries responsible for dealing with mapping the 64MB flash due to this 8MB of misalignment. In the end, there is address space from 0xec00_0000 to 0xefff_ffff where we can map it, and then the transition from booting from one config to the other will be a simple 0xec --> 0xfc mapping. Plus we can toss out a TLB entry. Note that TLB0 is kept at 64MB and not shrunk down to the 8MB boot flash; this means we won't have to change it when the alternate config uses the full 64MB for booting, in TLB0. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'doc/README.sbc8548')
-rw-r--r--doc/README.sbc85488
1 files changed, 7 insertions, 1 deletions
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548
index 6cbe12f..5fa9c93 100644
--- a/doc/README.sbc8548
+++ b/doc/README.sbc8548
@@ -100,6 +100,9 @@ Boot flash:
Sodimm flash:
intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000
+ Note that this address reflects the default setting for
+ the JTAG debugging tools, but since the alignment is
+ rather inconvenient, u-boot puts it at 0xec00_0000.
Jumpers:
@@ -187,9 +190,12 @@ start end CS<n> width Desc.
0000_0000 0fff_ffff MCS0,1 64 DDR2 (256MB)
f000_0000 f7ff_ffff CS3,4 32 LB SDRAM (128MB)
f800_0000 f8b0_1fff CS5 - EPLD
-fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB)
+fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) [*]
ff80_0000 ffff_ffff CS0 8 Boot flash (8MB)
+[*] fb80 represents the default programmed by WR JTAG register files,
+ but u-boot places the flash at either ec00 or fc00 based on JP12.
+
The EPLD on CS5 demuxes the following devices at the following offsets:
offset size width device