diff options
author | Wolfgang Denk <wd@denx.de> | 2012-07-30 20:39:52 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-30 20:39:52 +0200 |
commit | b98b611502f5e0a85a1f8e15cf46c470cb105614 (patch) | |
tree | cafae797ef1f031088e7a988d8e1eaa36ea016a3 /doc/README.sbc8548 | |
parent | 190649fb4309d1bc0fe7732fd0f951cb6440f935 (diff) | |
parent | 15ae8a31ca5d3860b0957edec4fca373daff6bb5 (diff) | |
download | u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.zip u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.tar.gz u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.tar.bz2 |
Merge branch 'next' of git://git.denx.de/u-boot
* 'next' of git://git.denx.de/u-boot:
MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
doc: cleanup - move board READMEs into respective board directories
net: sh_eth: add support for SH7757's GETHER
net: sh_eth: modify the definitions of regsiter
net: sh_eth: add SH_ETH_TYPE_ condition
net: sh_eth: clean up for the SH7757's code
net: fec_mxc: Fix MDC for xMII
net: fec_mxc: Fix setting of RCR for xMII
net: nfs: make NFS_TIMEOUT configurable
net: Inline the new eth_setenv_enetaddr_by_index function
net: allow setting env enetaddr from net device setting
net/designware: Consecutive writes to the same register to be avoided
CACHE: net: asix: Fix asix driver to work with data cache on
net: phy: micrel: make ksz9021 phy accessible
net: abort network initialization if the PHY driver fails
phylib: phy_startup() should return an error code on failure
net: tftp: fix type of block arg to store_block
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'doc/README.sbc8548')
-rw-r--r-- | doc/README.sbc8548 | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/doc/README.sbc8548 b/doc/README.sbc8548 deleted file mode 100644 index feac5e3..0000000 --- a/doc/README.sbc8548 +++ /dev/null @@ -1,269 +0,0 @@ -Intro: -====== - -The SBC8548 is a stand alone single board computer with a 1GHz -MPC8548 CPU, 8MB boot flash, 64MB user flash and, 256MB DDR2 400MHz -memory. It also has 128MB SDRAM 100MHz LBC memory, with both a PCI-e, -and a PCI-X slot, dual mini-DB9 for UART, and dual RJ-45 for eTSEC -ethernet connections. - -U-boot Configuration: -===================== - -The following possible u-boot configuration targets are available: - - 1) sbc8548_config - 2) sbc8548_PCI_33_config - 3) sbc8548_PCI_66_config - 4) sbc8548_PCI_33_PCIE_config - 5) sbc8548_PCI_66_PCIE_config - -Generally speaking, most people should choose to use #5. Details -of each choice are listed below. - -Choice #1 does not enable CONFIG_PCI, and assumes that the PCI slot -will be left empty (M66EN high), and so the board will operate with -a base clock of 66MHz. Note that you need both PCI enabled in u-boot -and linux in order to have functional PCI under linux. - -The second enables PCI support and builds for a 33MHz clock rate. Note -that if a 33MHz 32bit card is inserted in the slot, then the whole board -will clock down to a 33MHz base clock instead of the default 66MHz. This -will change the baud clocks and mess up your serial console output if you -were previously running at 66MHz. If you want to use a 33MHz PCI card, -then you should build a U-Boot with a _PCI_33_ config and store this -to flash prior to powering down the board and inserting the 33MHz PCI -card. [The above discussion assumes that the SW2[1-4] has not been changed -to reflect a different CCB:SYSCLK ratio] - -The third option builds PCI support in, and leaves the clocking at the -default 66MHz. Options four and five are just repeats of option two -and three, but with PCI-e support enabled as well. - -PCI output listing with an intel e1000 PCI-x and a Syskonnect SK-9Exx -is shown below for sbc8548_PCI_66_PCIE_config. (Note that PCI-e with -a 33MHz PCI configuration is currently untested.) - - => pci 0 - Scanning PCI devices on bus 0 - BusDevFun VendorId DeviceId Device Class Sub-Class - _____________________________________________________________ - 00.00.00 0x1057 0x0012 Processor 0x20 - 00.01.00 0x8086 0x1026 Network controller 0x00 - => pci 1 - Scanning PCI devices on bus 1 - BusDevFun VendorId DeviceId Device Class Sub-Class - _____________________________________________________________ - 01.00.00 0x1957 0x0012 Processor 0x20 - => pci 2 - Scanning PCI devices on bus 2 - BusDevFun VendorId DeviceId Device Class Sub-Class - _____________________________________________________________ - 02.00.00 0x1148 0x9e00 Network controller 0x00 - => - -Memory Size and using SPD: -========================== - -The default configuration uses hard coded memory configuration settings -for 256MB of DDR2 @400MHz. It does not by default use the DDR2 SPD -EEPROM data to read what memory is installed. - -There is a hardware errata, which causes the older local bus SDRAM -SPD EEPROM to land at the same address as the DDR2 SPD EEPROM, so -that the SPD data can not be read reliably. You can test if your -board has the errata fix by running "i2c probe". If you see 0x53 -as a valid device, it has been fixed. If you only see 0x50, 0x51 -then your board does not have the fix. - -You can also visually inspect the board to see if this hardware -fix has been applied: - - 1) Remove R314 (RES-R0174-033, 1K, 0603). R314 is located on - the back of the PCB behind the DDR SDRAM SODIMM connector. - 2) Solder RES-R0174-033 (1K, 0603) resistor from R314 pin 2 pad - to R313 pin 2. Pin 2 for each resistor is the end of the - resistor closest to the CPU. - -Boards without the mod will have R314 and R313 in parallel, like "||". -After the mod, they will be touching and form an "L" shape. - -If you want to upgrade to larger RAM size, you can simply enable - #define CONFIG_SPD_EEPROM - #define CONFIG_DDR_SPD -in include/configs/sbc8548.h file. (The lines are already there -but listed as #undef). - -If you did the i2c test, and your board does not have the errata -fix, then you will have to physically remove the LBC 128MB DIMM -from the board's socket to resolve the above i2c address overlap -issue and allow SPD autodetection of RAM to work. - - -Updating U-boot with U-boot: -============================ - -Note that versions of u-boot up to and including 2009.08 had u-boot stored -at 0xfff8_0000 -> 0xffff_ffff (512k). Currently it is being stored from -0xfffa_0000 -> 0xffff_ffff (384k). If you use an old macro/script to -update u-boot with u-boot and it uses the old address, you will render -your board inoperable, and you will require JTAG recovery. - -The following steps list how to update with the current address: - - tftp u-boot.bin - md 200000 10 - protect off all - erase fffa0000 ffffffff - cp.b 200000 fffa0000 60000 - md fffa0000 10 - protect on all - -The "md" steps in the above are just a precautionary step that allow -you to confirm the u-boot version that was downloaded, and then confirm -that it was copied to flash. - -The above assumes that you are using the default board settings which -have u-boot in the 8MB flash, tied to /CS0. - -If you are running the default 8MB /CS0 settings but want to store an -image in the SODIMM that is built with CONFIG_SYS_ALT_BOOT enabled, -(as a backup, etc) then the steps will become: - - tftp u-boot.bin - md 200000 10 - protect off all - era eff00000 efffffff - cp.b 200000 eff00000 100000 - md eff00000 10 - protect on all - -Finally, if you are running the alternate 64MB /CS0 settings and want -to update the in-use u-boot image, then (again with CONFIG_SYS_ALT_BOOT -enabled) the steps will become: - - tftp u-boot.bin - md 200000 10 - protect off all - era fff00000 ffffffff - cp.b 200000 fff00000 100000 - md fff00000 10 - protect on all - - -Hardware Reference: -=================== - -The following contains some summary information on hardware settings -that are relevant to u-boot, based on the board manual. For the -most up to date and complete details of the board, please request the -reference manual ERG-00327-001.pdf from www.windriver.com - -Boot flash: - intel V28F640Jx, 8192x8 (one device) at 0xff80_0000 - -Sodimm flash: - intel V28F128Jx, 16384x8 (4 devices) at 0xfb80_0000 - Note that this address reflects the default setting for - the JTAG debugging tools, but since the alignment is - rather inconvenient, u-boot puts it at 0xec00_0000. - - - Jumpers: - -Jumper Name ON OFF ----------------------------------------------------------------- -JP12 CS0/CS6 swap see note[*] see note[*] - -JP13 SODIMM flash write OK writes disabled - write prot. - -JP14 HRESET/TRST joined isolated - -JP15 PWR ON when AC pwr use S1 for on/off - -JP16 Demo LEDs lit not lit - -JP19 PCI mode PCI PCI-X - - -[*]JP12, when jumpered parallel to the SODIMM, puts the boot flash -onto /CS0 and the SODIMM flash on /CS6 (default). When JP12 -is jumpered parallel to the LBC-SDRAM, then /CS0 is for the -SODIMM flash and /CS6 is for the boot flash. Note that in this -alternate setting, you also need to switch SW2.8 to ON. -See the setting CONFIG_SYS_ALT_BOOT if you want to use this setting -and boot u-boot from the 64MB SODIMM - - - Switches: - -The defaults are marked with a * - -Name Desc. ON OFF ------------------------------------------------------------------- -S1 Pwr toggle n/a n/a - -SW2.1 CFG_SYS_PLL0 1 0* -SW2.2 CFG_SYS_PLL1 1* 0 -SW2.3 CFG_SYS_PLL2 1* 0 -SW2.4 CFG_SYS_PLL3 1 0* -SW2.5 CFG_CORE_PLL0 1* 0 -SW2.6 CFG_CORE_PLL1 1 0* -SW2.7 CFG_CORE_PLL2 1* 0 -SW2.8 CFG_ROM_LOC1 1 0* - -SW3.1 CFG_HOST_AGT0 1* 0 -SW3.2 CFG_HOST_AGT1 1* 0 -SW3.3 CFG_HOST_AGT2 1* 0 -SW3.4 CFG_IO_PORTS0 1* 0 -SW3.5 CFG_IO_PORTS0 1 0* -SW3.6 CFG_IO_PORTS0 1 0* - -SerDes CLK(MHz) SW5.1 SW5.2 ----------------------------------------------- -25 0 0 -100* 1 0 -125 0 1 -200 1 1 - -SerDes CLK spread SW5.3 SW5.4 ----------------------------------------------- -+/- 0.25% 0 0 --0.50% 1 0 --0.75% 0 1 -No Spread* 1 1 - -SW4 settings are readable from the EPLD and are currently not used for -any hardware settings (i.e. user configuration switches). - - LEDs: - -Name Desc. ON OFF ------------------------------------------------------------------- -D13 PCI/PCI-X PCI-X PCI -D14 3.3V PWR 3.3V no power -D15 SYSCLK 66MHz 33MHz - - - Default Memory Map: - -start end CS<n> width Desc. ----------------------------------------------------------------------- -0000_0000 0fff_ffff MCS0,1 64 DDR2 (256MB) -f000_0000 f7ff_ffff CS3,4 32 LB SDRAM (128MB) -f800_0000 f8b0_1fff CS5 - EPLD -fb80_0000 ff7f_ffff CS6 32 SODIMM flash (64MB) [*] -ff80_0000 ffff_ffff CS0 8 Boot flash (8MB) - -[*] fb80 represents the default programmed by WR JTAG register files, - but u-boot places the flash at either ec00 or fc00 based on JP12. - -The EPLD on CS5 demuxes the following devices at the following offsets: - -offset size width device --------------------------------------------------------- -0 1fff 8 7 segment display LED -10_0000 1fff 4 user switches -30_0000 1fff 4 HW Rev. register -b0_0000 1fff 8 8kB EEPROM |