summaryrefslogtreecommitdiff
path: root/doc/README.mx28_common
diff options
context:
space:
mode:
authorFabio Estevam <fabio.estevam@freescale.com>2013-05-03 15:07:58 -0300
committerStefano Babic <sbabic@denx.de>2013-06-26 17:34:22 +0200
commit3f5e2e2a7db13dda7b656bbddda10b9cd0d2c871 (patch)
tree3b82df10328759bad0fb03a797e74cb456a8576c /doc/README.mx28_common
parent84286c22e6c6de03cd2749ef9d103fb9b79279ad (diff)
downloadu-boot-imx-3f5e2e2a7db13dda7b656bbddda10b9cd0d2c871.zip
u-boot-imx-3f5e2e2a7db13dda7b656bbddda10b9cd0d2c871.tar.gz
u-boot-imx-3f5e2e2a7db13dda7b656bbddda10b9cd0d2c871.tar.bz2
README: mx28_common: Do not hardcode the SSP port
MX28 can boot from SSP0 or SSP1, so it is better not to hardcode the SSP port in the instructions. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Diffstat (limited to 'doc/README.mx28_common')
-rw-r--r--doc/README.mx28_common4
1 files changed, 1 insertions, 3 deletions
diff --git a/doc/README.mx28_common b/doc/README.mx28_common
index ac82419..bba2440 100644
--- a/doc/README.mx28_common
+++ b/doc/README.mx28_common
@@ -100,9 +100,7 @@ discussed in the following chapters.
-----------------------------------------------------------
To boot a MX28 based board from SD, set the boot mode DIP switches according
-to i.MX28 manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on
-SSP0, 3.3V.
-
+to i.MX28 manual chapter 12.2.1 (Table 12-2).
An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
table, which in turn carries a partition of special type and which contains a