doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 84 deletions

diff --git a/doc/README.mvblm7 b/doc/README.mvblm7
deleted file mode 100644
index a0686f7..0000000
--- a/doc/README.mvblm7
+++ /dev/null
@@ -1,84 +0,0 @@
-Matrix Vision mvBlueLYNX-M7 (mvBL-M7)
--------------------------------------
-
-1.	Board Description
-
-	The mvBL-M7 is a 120x120mm single board computing platform
-	with strong focus on stereo image processing applications.
-
-	Power Supply is either VDC 12-48V or Pover over Ethernet (PoE)
-	on any port (requires add-on board).
-
-2	System Components
-
-2.1	CPU
-	Freescale MPC8343VRAGDB CPU running at 400MHz core and 266MHz csb.
-	512MByte DDR-II memory @ 133MHz.
-	8 MByte Nor Flash on local bus.
-	2 Vitesse VSC8601 RGMII ethernet Phys.
-	1 USB host controller over ULPI I/F.
-	2 serial ports. Console running on ttyS0 @ 115200 8N1.
-	1 SD-Card slot connected to SPI.
-	System configuration (HRCW) is taken from I2C EEPROM.
-
-2.2	PCI
-	A miniPCI Type-III socket is present. PCI clock fixed at 66MHz.
-
-2.3	FPGA
-	Altera Cyclone-II EP2C20/35 with PCI DMA engines.
-	Connects to dual Matrix Vision specific CCD/CMOS sensor interfaces.
-	Utilizes another 256MB DDR-II memory and 32-128MB Nand Flash.
-
-2.3.1	I/O @ FPGA
-	2x8 Outputs : Infineon High-Side Switches to Main Supply.
-	2x8 Inputs  : Programmable input threshold + trigger capabilities
-	2 dedicated flash interfaces for illuminator boards.
-	Cross trigger for chaining several boards.
-
-2.4	I2C
-	Bus1:
-		MAX5381 DAC @ 0x60 for 1st digital input threshold.
-		LM75 @ 0x90 for temperature monitoring.
-		EEPROM @ 0xA0 for system setup (HRCW etc.) + vendor specifics.
-		1st image sensor interface (slave addresses depend on sensor)
-	Bus2:
-		MAX5381 DAC @ 0x60 for 2nd digital input threshold.
-		2nd image sensor interface (slave addresses depend on sensor)
-
-3	Flash layout.
-
-	reset vector is 0xFFF00100, i.e. "HIGHBOOT".
-
-	FF800000	environment
-	FF802000	redundant environment
-	FF804000	u-boot script image
-	FF806000	redundant u-boot script image
-	FF808000	device tree blob
-	FF80A000	redundant device tree blob
-	FF80C000	tbd.
-	FF80E000	tbd.
-	FF810000	kernel
-	FFC00000	root FS
-	FFF00000	u-boot
-	FFF80000	FPGA raw bit file
-
-	mtd partitions are propagated to linux kernel via device tree blob.
-
-4	Booting
-
-	On startup the bootscript @ FF804000 is executed. This script can be
-	exchanged easily. Default boot mode is "boot from flash", i.e. system
-	works stand-alone.
-
-	This behaviour depends on some environment variables :
-
-	"netboot" : yes ->try dhcp/bootp and boot from network.
-	A "dhcp_client_id" and "dhcp_vendor-class-identifier" can be used for
-	DHCP server configuration, e.g. to provide different images to
-	different devices.
-
-	During netboot the system tries to get 3 image files:
-	1. Kernel - name + data is given during BOOTP.
-	2. Initrd - name is stored in "initrd_name"
-	3. device tree blob - name is stored in "dtb_name"
-	Fallback files are the flash versions.