summaryrefslogtreecommitdiff
path: root/doc/README.mpc8323erdb
diff options
context:
space:
mode:
authorKim Phillips <kim.phillips@freescale.com>2007-07-25 19:25:33 -0500
committerKim Phillips <kim.phillips@freescale.com>2007-08-10 01:12:25 -0500
commit1c274c4e05b6dc9b24edc8aa618b02f607ee6eed (patch)
treef8adbc9f4f2b7f052e0bd1924ab7f2601c1c2323 /doc/README.mpc8323erdb
parent343d91009d55fc5b3ff8cc940597af6c6aa1d359 (diff)
downloadu-boot-imx-1c274c4e05b6dc9b24edc8aa618b02f607ee6eed.zip
u-boot-imx-1c274c4e05b6dc9b24edc8aa618b02f607ee6eed.tar.gz
u-boot-imx-1c274c4e05b6dc9b24edc8aa618b02f607ee6eed.tar.bz2
mpc83xx: add support for the MPC8323E RDB
MPC8323E based board with 64MB fixed SDRAM, 16MB flash, five 10/100 ethernet ports connected via an ICPlus IP175C switch, one PCI slot, and serial. Features not supported in this patch are SD card interface, 2 USB ports, and the two phone ports. Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Diffstat (limited to 'doc/README.mpc8323erdb')
-rw-r--r--doc/README.mpc8323erdb71
1 files changed, 71 insertions, 0 deletions
diff --git a/doc/README.mpc8323erdb b/doc/README.mpc8323erdb
new file mode 100644
index 0000000..6f89829
--- /dev/null
+++ b/doc/README.mpc8323erdb
@@ -0,0 +1,71 @@
+Freescale MPC8323ERDB Board
+-----------------------------------------
+
+1. Memory Map
+ The memory map looks like this:
+
+ 0x0000_0000 0x03ff_ffff DDR 64M
+ 0x8000_0000 0x8fff_ffff PCI MEM 256M
+ 0x9000_0000 0x9fff_ffff PCI_MMIO 256M
+ 0xe000_0000 0xe00f_ffff IMMR 1M
+ 0xd000_0000 0xd3ff_ffff PCI IO 64M
+ 0xfe00_0000 0xfeff_ffff NOR FLASH (CS0) 16M
+
+2. Compilation
+
+ Assuming you're using BASH (or similar) as your shell:
+
+ export CROSS_COMPILE=your-cross-compiler-prefix-
+ make distclean
+ make MPC8323ERDB_config
+ make
+
+3. Downloading and Flashing Images
+
+3.1 Reflash U-boot Image using U-boot
+
+ N.b, have an alternate means of programming
+ the flash available if the new u-boot doesn't boot.
+
+ First try a:
+
+ tftpboot $loadaddr $uboot
+
+ to make sure that the TFTP load will succeed before
+ an erase goes ahead and wipes out your current firmware.
+ Then do a:
+
+ run tftpflash
+
+ which is a shorter version of the manual sequence:
+
+ tftp $loadaddr u-boot.bin
+ protect off fe000000 +$filesize
+ erase fe000000 +$filesize
+ cp.b $loadaddr fe000000 $filesize
+
+ To keep your old u-boot's environment variables, do a:
+
+ saveenv
+
+ prior to resetting the board.
+
+3.2 Downloading and Booting Linux Kernel
+
+ Ensure that all networking-related environment variables are set
+ properly (including ipaddr, serverip, gatewayip (if needed),
+ netmask, ethaddr, eth1addr, rootpath (if using NFS root),
+ fdtfile, and bootfile).
+
+ Then, do one of the following, depending on whether you
+ want an NFS root or a ramdisk root:
+
+ run nfsboot
+
+ or
+
+ run ramboot
+
+4 Notes
+
+ The console baudrate for MPC8323ERDB is 115200bps.