diff options
author | Wolfgang Denk <wd@denx.de> | 2012-04-29 23:57:39 +0000 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-29 15:42:02 +0200 |
commit | 702e6014f15b307f144fa03ecaf83a8446c6802a (patch) | |
tree | 8c9360248c257f52c1487d9e6cbba3f2dc38e294 /doc/README.m54455evb | |
parent | 631fea8f2d70aa5eb7c49b33039971dfc61bba88 (diff) | |
download | u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.zip u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.tar.gz u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.tar.bz2 |
doc: cleanup - move board READMEs into respective board directories
Also drop a few files referring to no longer / not yet supported
boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Diffstat (limited to 'doc/README.m54455evb')
-rw-r--r-- | doc/README.m54455evb | 409 |
1 files changed, 0 insertions, 409 deletions
diff --git a/doc/README.m54455evb b/doc/README.m54455evb deleted file mode 100644 index 2bc6ce4..0000000 --- a/doc/README.m54455evb +++ /dev/null @@ -1,409 +0,0 @@ -Freescale MCF54455EVB ColdFire Development Board -================================================ - -TsiChung Liew(Tsi-Chung.Liew@freescale.com) -Created 4/08/07 -=========================================== - - -Changed files: -============== - -- board/freescale/m54455evb/m54455evb.c Dram setup, IDE pre init, and PCI init -- board/freescale/m54455evb/flash.c Atmel and INTEL flash support -- board/freescale/m54455evb/Makefile Makefile -- board/freescale/m54455evb/config.mk config make -- board/freescale/m54455evb/u-boot.lds Linker description - -- common/cmd_bdinfo.c Clock frequencies output -- common/cmd_mii.c mii support - -- arch/m68k/cpu/mcf5445x/cpu.c cpu specific code -- arch/m68k/cpu/mcf5445x/cpu_init.c Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs -- arch/m68k/cpu/mcf5445x/interrupts.c cpu specific interrupt support -- arch/m68k/cpu/mcf5445x/speed.c system, pci, flexbus, and cpu clock -- arch/m68k/cpu/mcf5445x/Makefile Makefile -- arch/m68k/cpu/mcf5445x/config.mk config make -- arch/m68k/cpu/mcf5445x/start.S start up assembly code - -- doc/README.m54455evb This readme file - -- drivers/net/mcffec.c ColdFire common FEC driver -- drivers/serial/mcfuart.c ColdFire common UART driver - -- include/asm-m68k/bitops.h Bit operation function export -- include/asm-m68k/byteorder.h Byte order functions -- include/asm-m68k/fec.h FEC structure and definition -- include/asm-m68k/fsl_i2c.h I2C structure and definition -- include/asm-m68k/global_data.h Global data structure -- include/asm-m68k/immap.h ColdFire specific header file and driver macros -- include/asm-m68k/immap_5445x.h mcf5445x specific header file -- include/asm-m68k/io.h io functions -- include/asm-m68k/m5445x.h mcf5445x specific header file -- include/asm-m68k/posix_types.h Posix -- include/asm-m68k/processor.h header file -- include/asm-m68k/ptrace.h Exception structure -- include/asm-m68k/rtc.h Realtime clock header file -- include/asm-m68k/string.h String function export -- include/asm-m68k/timer.h Timer structure and definition -- include/asm-m68k/types.h Data types definition -- include/asm-m68k/uart.h Uart structure and definition -- include/asm-m68k/u-boot.h u-boot structure - -- include/configs/M54455EVB.h Board specific configuration file - -- arch/m68k/lib/board.c board init function -- arch/m68k/lib/cache.c -- arch/m68k/lib/interrupts Coldfire common interrupt functions -- arch/m68k/lib/m68k_linux.c -- arch/m68k/lib/time.c Timer functions (Dma timer and PIT) -- arch/m68k/lib/traps.c Exception init code - -- rtc/mcfrtc.c Realtime clock Driver - -1 MCF5445x specific Options/Settings -==================================== -1.1 pre-loader is no longer suppoer in thie coldfire family - -1.2 Configuration settings for M54455EVB Development Board -CONFIG_MCF5445x -- define for all MCF5445x CPUs -CONFIG_M54455 -- define for all Freescale MCF54455 CPUs -CONFIG_M54455EVB -- define for M54455EVB board - -CONFIG_MCFUART -- define to use common CF Uart driver -CONFIG_SYS_UART_PORT -- define UART port number, start with 0, 1 and 2 -CONFIG_BAUDRATE -- define UART baudrate - -CONFIG_MCFRTC -- define to use common CF RTC driver -CONFIG_SYS_MCFRTC_BASE -- provide base address for RTC in immap.h -CONFIG_SYS_RTC_OSCILLATOR -- define RTC clock frequency -RTC_DEBUG -- define to show RTC debug message -CONFIG_CMD_DATE -- enable to use date feature in u-boot - -CONFIG_MCFFEC -- define to use common CF FEC driver -CONFIG_MII -- enable to use MII driver -CONFIG_CF_DOMII -- enable to use MII feature in cmd_mii.c -CONFIG_SYS_DISCOVER_PHY -- enable PHY discovery -CONFIG_SYS_RX_ETH_BUFFER -- Set FEC Receive buffer -CONFIG_SYS_FAULT_ECHO_LINK_DOWN-- -CONFIG_SYS_FEC0_PINMUX -- Set FEC0 Pin configuration -CONFIG_SYS_FEC1_PINMUX -- Set FEC1 Pin configuration -CONFIG_SYS_FEC0_MIIBASE -- Set FEC0 MII base register -CONFIG_SYS_FEC1_MIIBASE -- Set FEC0 MII base register -MCFFEC_TOUT_LOOP -- set FEC timeout loop -CONFIG_HAS_ETH1 -- define to enable second FEC in u-boot - -CONFIG_ISO_PARTITION -- enable ISO read/write -CONFIG_DOS_PARTITION -- enable DOS read/write -CONFIG_IDE_RESET -- define ide_reset() -CONFIG_IDE_PREINIT -- define ide_preinit() -CONFIG_ATAPI -- define ATAPI support -CONFIG_LBA48 -- define LBA48 (larger than 120GB) support -CONFIG_SYS_IDE_MAXBUS -- define max channel -CONFIG_SYS_IDE_MAXDEVICE -- define max devices per channel -CONFIG_SYS_ATA_BASE_ADDR -- define ATA base address -CONFIG_SYS_ATA_IDE0_OFFSET -- define ATA IDE0 offset -CONFIG_SYS_ATA_DATA_OFFSET -- define ATA data IO -CONFIG_SYS_ATA_REG_OFFSET -- define for normal register accesses -CONFIG_SYS_ATA_ALT_OFFSET -- define for alternate registers -CONFIG_SYS_ATA_STRIDE -- define for Interval between registers -_IO_BASE -- define for IO base address - -CONFIG_MCFTMR -- define to use DMA timer -CONFIG_MCFPIT -- define to use PIT timer - -CONFIG_FSL_I2C -- define to use FSL common I2C driver -CONFIG_HARD_I2C -- define for I2C hardware support -CONFIG_SOFT_I2C -- define for I2C bit-banged -CONFIG_SYS_I2C_SPEED -- define for I2C speed -CONFIG_SYS_I2C_SLAVE -- define for I2C slave address -CONFIG_SYS_I2C_OFFSET -- define for I2C base address offset -CONFIG_SYS_IMMR -- define for MBAR offset - -CONFIG_PCI -- define for PCI support -CONFIG_PCI_PNP -- define for Plug n play support -CONFIG_SYS_PCI_MEM_BUS -- PCI memory logical offset -CONFIG_SYS_PCI_MEM_PHYS -- PCI memory physical offset -CONFIG_SYS_PCI_MEM_SIZE -- PCI memory size -CONFIG_SYS_PCI_IO_BUS -- PCI IO logical offset -CONFIG_SYS_PCI_IO_PHYS -- PCI IO physical offset -CONFIG_SYS_PCI_IO_SIZE -- PCI IO size -CONFIG_SYS_PCI_CFG_BUS -- PCI Configuration logical offset -CONFIG_SYS_PCI_CFG_PHYS -- PCI Configuration physical offset -CONFIG_SYS_PCI_CFG_SIZE -- PCI Configuration size - -CONFIG_EXTRA_CLOCK -- Enable extra clock such as vco, flexbus, pci, etc - -CONFIG_SYS_MBAR -- define MBAR offset - -CONFIG_SYS_ATMEL_BOOT -- To determine the u-boot is booted from Atmel or Intel - -CONFIG_MONITOR_IS_IN_RAM -- Not support - -CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF54455 internal SRAM - -CONFIG_SYS_CSn_BASE -- defines the Chip Select Base register -CONFIG_SYS_CSn_MASK -- defines the Chip Select Mask register -CONFIG_SYS_CSn_CTRL -- defines the Chip Select Control register - -CONFIG_SYS_ATMEL_BASE -- defines the Atmel Flash base -CONFIG_SYS_INTEL_BASE -- defines the Intel Flash base - -CONFIG_SYS_SDRAM_BASE -- defines the DRAM Base -CONFIG_SYS_SDRAM_BASE1 -- defines the DRAM Base 1 - -2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL -=========================================== -2.1. System memory map: - Flash: 0x00000000-0x3FFFFFFF (1024MB) - DDR: 0x40000000-0x7FFFFFFF (1024MB) - SRAM: 0x80000000-0x8FFFFFFF (256MB) - ATA: 0x90000000-0x9FFFFFFF (256MB) - PCI: 0xA0000000-0xBFFFFFFF (512MB) - FlexBus: 0xC0000000-0xDFFFFFFF (512MB) - IP: 0xF0000000-0xFFFFFFFF (256MB) - -2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and - linux kernel, you can customize it based on your system requirements: - Atmel boot: - Flash0: 0x00000000-0x0007FFFF (512KB) - Flash1: 0x04000000-0x05FFFFFF (32MB) - Intel boot: - Flash0: 0x00000000-0x01FFFFFF (32MB) - Flash1: 0x04000000-0x0407FFFF (512KB) - - CPLD: 0x08000000-0x08FFFFFF (16MB) - FPGA: 0x09000000-0x09FFFFFF (16MB) - DDR: 0x40000000-0x4FFFFFFF (256MB) - SRAM: 0x80000000-0x80007FFF (32KB) - IP: 0xFC000000-0xFC0FFFFF (64KB) - -3. SWITCH SETTINGS -================== -3.1 SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL - SW1 Pin4: 0 - ULPI chip not in reset state or 1 - ULPI chip in reset state - SW1 Pin5: 0 - Full ATA Bus enabled, FEC Phy1 powered down - 1 - Upper 8 bits ATA data bus disabled, FEC PHY1 active - SW1 Pin6: 0 - FEC Phy0 active or 1 - FEC Phy0 powered down - SW1 Pin3: 0 - Boot from Atmel or 1 - INTEL - -4. COMPILATION -============== -4.1 To create U-Boot the gcc-4.1-32 compiler set (ColdFire ELF version) -from codesourcery.com was used. Download it from: -http://www.codesourcery.com/gnu_toolchains/coldfire/download.html - -4.2 Compilation - export CROSS_COMPILE=cross-compile-prefix - cd u-boot-1.x.x - make distclean - make M54455EVB_config, or - default to atmel 33Mhz input clock - make M54455EVB_atmel_config, or - default to atmel 33Mhz input clock - make M54455EVB_a33_config, or - default to atmel 33Mhz input clock - make M54455EVB_a66_config, or - default to atmel 66Mhz input clock - make M54455EVB_intel_config, or - default to intel 33Mhz input clock - make M54455EVB_i33_config, or - default to intel 33Mhz input clock - make M54455EVB_i66_config, or - default to intel 66Mhz input clock - make - -5. SCREEN DUMP -============== -5.1 M54455EVB Development board - Boot from Atmel (NOTE: May not show exactly the same) - -U-Boot 1.2.0-g98c80b46-dirty (Jul 26 2007 - 12:44:08) - -CPU: Freescale MCF54455 (Mask:48 Version:1) - CPU CLK 266 Mhz BUS CLK 133 Mhz FLB CLK 66 Mhz - PCI CLK 33 Mhz INP CLK 33 Mhz VCO CLK 533 Mhz -Board: Freescale M54455 EVB -I2C: ready -DRAM: 256 MB -FLASH: 16.5 MB -In: serial -Out: serial -Err: serial -Net: FEC0, FEC1 -IDE: Bus 0: not available --> print -bootargs=root=/dev/ram rw -bootdelay=1 -baudrate=115200 -ethaddr=00:e0:0c:bc:e5:60 -eth1addr=00:e0:0c:bc:e5:61 -hostname=M54455EVB -netdev=eth0 -inpclk=33333333 -loadaddr=40010000 -load=tftp ${loadaddr) ${u-boot} -upd=run load; run prog -prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save -ethact=FEC0 -mtdids=nor0=M54455EVB-1 -mtdparts=M54455EVB-1:16m(user) -u-boot=u-boot54455.bin -filesize=292b4 -fileaddr=40010000 -gatewayip=192.168.1.1 -netmask=255.255.255.0 -ipaddr=192.168.1.3 -serverip=192.168.1.2 -stdin=serial -stdout=serial -stderr=serial -mem=261632k - -Environment size: 563/8188 bytes --> bdinfo -memstart = 0x40000000 -memsize = 0x10000000 -flashstart = 0x00000000 -flashsize = 0x01080000 -flashoffset = 0x00000000 -sramstart = 0x80000000 -sramsize = 0x00008000 -mbar = 0xFC000000 -busfreq = 133.333 MHz -pcifreq = 33.333 MHz -flbfreq = 66.666 MHz -inpfreq = 33.333 MHz -vcofreq = 533.333 MHz -ethaddr = 00:E0:0C:BC:E5:60 -eth1addr = 00:E0:0C:BC:E5:61 -ip_addr = 192.168.1.3 -baudrate = 115200 bps --> --> help -? - alias for 'help' -base - print or set address offset -bdinfo - print Board Info structure -boot - boot default, i.e., run 'bootcmd' -bootd - boot default, i.e., run 'bootcmd' -bootelf - Boot from an ELF image in memory -bootm - boot application image from memory -bootp - boot image via network using BootP/TFTP protocol -bootvx - Boot vxWorks from an ELF image -cmp - memory compare -coninfo - print console devices and information -cp - memory copy -crc32 - checksum calculation -date - get/set/reset date & time -dcache - enable or disable data cache -diskboot- boot from IDE device -echo - echo args to console -erase - erase FLASH memory -ext2load- load binary file from a Ext2 filesystem -ext2ls - list files in a directory (default /) -fatinfo - print information about filesystem -fatload - load binary file from a dos filesystem -fatls - list files in a directory (default /) -flinfo - print FLASH memory information -fsinfo - print information about filesystems -fsload - load binary file from a filesystem image -go - start application at address 'addr' -help - print online help -i2c - I2C sub-system -icache - enable or disable instruction cache -ide - IDE sub-system -iminfo - print header information for application image -imls - list all images found in flash -itest - return true/false on integer compare -loadb - load binary file over serial line (kermit mode) -loads - load S-Record file over serial line -loady - load binary file over serial line (ymodem mode) -loop - infinite loop on address range -ls - list files in a directory (default /) -md - memory display -mii - MII utility commands -mm - memory modify (auto-incrementing) -mtest - simple RAM test -mw - memory write (fill) -nfs - boot image via network using NFS protocol -nm - memory modify (constant address) -pci - list and access PCI Configuration Space -ping - send ICMP ECHO_REQUEST to network host -printenv- print environment variables -protect - enable or disable FLASH write protection -rarpboot- boot image via network using RARP/TFTP protocol -reset - Perform RESET of the CPU -run - run commands in an environment variable -saveenv - save environment variables to persistent storage -setenv - set environment variables -sleep - delay execution for some time -source - run script from memory -tftpboot- boot image via network using TFTP protocol -version - print monitor version -->bootm 4000000 - -## Booting image at 04000000 ... - Image Name: Linux Kernel Image - Created: 2007-08-14 15:13:00 UTC - Image Type: M68K Linux Kernel Image (uncompressed) - Data Size: 2301952 Bytes = 2.2 MB - Load Address: 40020000 - Entry Point: 40020000 - Verifying Checksum ... OK -OK -Linux version 2.6.20-gfe5136d6-dirty (mattw@kea) (gcc version 4.2.0 20070318 (pr -erelease) (Sourcery G++ Lite 4.2-20)) #108 Mon Aug 13 13:00:13 MDT 2007 -starting up linux startmem 0xc0254000, endmem 0xcfffffff, size 253MB -Built 1 zonelists. Total pages: 32624 -Kernel command line: root=/dev/mtdblock1 rw rootfstype=jffs2 ip=none mtdparts=ph -ysmap-flash.0:5M(kernel)ro,-(jffs2) -PID hash table entries: 1024 (order: 10, 4096 bytes) -Console: colour dummy device 80x25 -Dentry cache hash table entries: 32768 (order: 4, 131072 bytes) -Inode-cache hash table entries: 16384 (order: 3, 65536 bytes) -Memory: 257496k/262136k available (1864k kernel code, 2440k data, 88k init) -Mount-cache hash table entries: 1024 -NET: Registered protocol family 16 -SCSI subsystem initialized -NET: Registered protocol family 2 -IP route cache hash table entries: 2048 (order: 0, 8192 bytes) -TCP established hash table entries: 8192 (order: 2, 32768 bytes) -TCP bind hash table entries: 4096 (order: 1, 16384 bytes) -TCP: Hash tables configured (established 8192 bind 4096) -TCP reno registered -JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. -io scheduler noop registered -io scheduler anticipatory registered -io scheduler deadline registered -io scheduler cfq registered (default) -ColdFire internal UART serial driver version 1.00 -ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART -ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART -ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART -RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize -loop: loaded (max 8 devices) -FEC ENET Version 0.2 -fec: PHY @ 0x0, ID 0x20005ca2 -- DP83849 -eth0: ethernet 00:08:ee:00:e4:19 -physmap platform flash device: 01000000 at 04000000 -physmap-flash.0: Found 1 x16 devices at 0x0 in 8-bit bank - Intel/Sharp Extended Query Table at 0x0031 -Using buffer write method -cfi_cmdset_0001: Erase suspend on write enabled -2 cmdlinepart partitions found on MTD device physmap-flash.0 -Creating 2 MTD partitions on "physmap-flash.0": -0x00000000-0x00500000 : "kernel" -mtd: Giving out device 0 to kernel -0x00500000-0x01000000 : "jffs2" -mtd: Giving out device 1 to jffs2 -mice: PS/2 mouse device common for all mice -i2c /dev entries driver -TCP cubic registered -NET: Registered protocol family 1 -NET: Registered protocol family 17 -NET: Registered protocol family 15 -VFS: Mounted root (jffs2 filesystem). -Setting the hostname to freescale -Mounting filesystems -mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory -Starting syslogd and klogd -Setting up networking on loopback device: -Setting up networking on eth0: -eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX. -Adding static route for default gateway to 172.27.255.254: -Setting nameserver to 172.27.0.1 in /etc/resolv.conf: -Starting inetd: -/ # |