doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 326 deletions

diff --git a/doc/README.m5373evb b/doc/README.m5373evb
deleted file mode 100644
index 419d4d6..0000000
--- a/doc/README.m5373evb
+++ /dev/null
@@ -1,326 +0,0 @@
-Freescale MCF5373EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created 11/08/07
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m5373evb/m5373evb.c	Dram setup
-- board/freescale/m5373evb/mii.c	Mii access
-- board/freescale/m5373evb/Makefile	Makefile
-- board/freescale/m5373evb/config.mk	config make
-- board/freescale/m5373evb/u-boot.lds	Linker description
-
-- arch/m68k/cpu/mcf532x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf532x/cpu_init.c	FBCS, Mux pins, icache and RTC extra regs
-- arch/m68k/cpu/mcf532x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf532x/speed.c		system, pci, flexbus, and cpu clock
-- arch/m68k/cpu/mcf532x/Makefile		Makefile
-- arch/m68k/cpu/mcf532x/config.mk		config make
-- arch/m68k/cpu/mcf532x/start.S		start up assembly code
-
-- doc/README.m5373evb		This readme file
-
-- drivers/net/mcffec.c		ColdFire common FEC driver
-- drivers/serial/mcfuart.c	ColdFire common UART driver
-- drivers/rtc/mcfrtc.c		Realtime clock Driver
-
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/fec.h		FEC structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_532x.h		mcf532x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/m532x.h		mcf532x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		u-boot structure
-
-- include/configs/M5373EVB.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF5373 specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in thie coldfire family
-
-1.2 Configuration settings for M5373EVB Development Board
-CONFIG_MCF532x		-- define for all MCF532x CPUs
-CONFIG_M5373		-- define for all Freescale MCF5373 CPUs
-CONFIG_M5373EVB		-- define for M5373EVB board
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_MCFRTC		-- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
-RTC_DEBUG		-- define to show RTC debug message
-CONFIG_CMD_DATE		-- enable to use date feature in u-boot
-
-CONFIG_MCFFEC		-- define to use common CF FEC driver
-CONFIG_MII		-- enable to use MII driver
-CONFIG_CF_DOMII		-- enable to use MII feature in cmd_mii.c
-CONFIG_SYS_DISCOVER_PHY	-- enable PHY discovery
-CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
-CONFIG_SYS_FAULT_ECHO_LINK_DOWN--
-CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
-CONFIG_SYS_FEC0_MIIBASE	-- Set FEC0 MII base register
-MCFFEC_TOUT_LOOP	-- set FEC timeout loop
-
-CONFIG_MCFTMR		-- define to use DMA timer
-CONFIG_MCFPIT		-- define to use PIT timer
-
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
-CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5373 internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0x00000000-0x3FFFFFFF (1024MB)
-	DDR:		0x40000000-0x7FFFFFFF (1024MB)
-	SRAM:		0x80000000-0x8FFFFFFF (256MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
-	linux kernel, you can customize it based on your system requirements:
-	Flash0:		0x00000000-0x00FFFFFF (16MB)
-
-	DDR:		0x40000000-0x4FFFFFFF (256MB)
-	SRAM:		0x80000000-0x80007FFF (32KB)
-	IP:		0xFC000000-0xFC0FFFFF (64KB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
-uClinux version) from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M5373EVB_config
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M5373EVB Development board
-    (NOTE: May not show exactly the same)
-
-U-Boot 1.3.0 (Nov 8 2007 - 12:44:08)
-
-CPU:   Freescale MCF5373 (Mask:65 Version:1)
-       CPU CLK 240 Mhz BUS CLK 80 Mhz
-Board: Freescale FireEngine 5373 EVB
-I2C:   ready
-DRAM:  32 MB
-FLASH: 2 MB
-In:    serial
-Out:   serial
-Err:   serial
-NAND:  16 MiB
-Net:   FEC0
--> print
-bootdelay=1
-baudrate=115200
-ethaddr=00:e0:0c:bc:e5:60
-hostname=M5373EVB
-netdev=eth0
-loadaddr=40010000
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 2ffff;era 0 2ffff;cp.b ${loadaddr} 0 ${filesize};save
-ethact=FEC0
-u-boot=u-boot.bin
-gatewayip=192.168.1.1
-netmask=255.255.255.0
-ipaddr=192.168.1.3
-serverip=192.168.1.2
-stdin=serial
-stdout=serial
-stderr=serial
-mem=261632k
-
-Environment size: 401/8188 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x02000000
-flashstart  = 0x00000000
-flashsize   = 0x00200000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00008000
-mbar	    = 0xFC000000
-busfreq     =	  80 MHz
-ethaddr     = 00:E0:0C:BC:E5:60
-ip_addr     = 192.168.1.3
-baudrate    = 115200 bps
-->
--> help
-?	- alias for 'help'
-base	- print or set address offset
-bdinfo	- print Board Info structure
-boot	- boot default, i.e., run 'bootcmd'
-bootd	- boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm	- boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx	- Boot vxWorks from an ELF image
-cmp	- memory compare
-coninfo - print console devices and information
-cp	- memory copy
-crc32	- checksum calculation
-date	- get/set/reset date & time
-dcache	- enable or disable data cache
-echo	- echo args to console
-erase	- erase FLASH memory
-flinfo	- print FLASH memory information
-go	- start application at address 'addr'
-help	- print online help
-i2c	- I2C sub-system
-icache	- enable or disable instruction cache
-iminfo	- print header information for application image
-imls	- list all images found in flash
-itest	- return true/false on integer compare
-loadb	- load binary file over serial line (kermit mode)
-loads	- load S-Record file over serial line
-loady	- load binary file over serial line (ymodem mode)
-loop	- infinite loop on address range
-ls	- list files in a directory (default /)
-md	- memory display
-mii	- MII utility commands
-mm	- memory modify (auto-incrementing)
-mtest	- simple RAM test
-mw	- memory write (fill)
-nand	- NAND sub-system
-nboot	- boot from NAND device
-nfs	- boot image via network using NFS protocol
-nm	- memory modify (constant address)
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-rarpboot- boot image via network using RARP/TFTP protocol
-reset	- Perform RESET of the CPU
-run	- run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv	- set environment variables
-sleep	- delay execution for some time
-source	- run script from memory
-tftpboot- boot image via network using TFTP protocol
-version - print monitor version
--> tftp 0x40800000 uImage
-Using FEC0 device
-TFTP from server 192.168.1.3; our IP address is 192.168.1.3 Filename 'uImage'.
-Load address: 0x40800000
-Loading: #################################################################
-	  #################################################################
-	  ##########
-done
-Bytes transferred = 2053270 (1f5496 hex)
--> bootm 0x40800000
-## Booting image at 40800000 ...
-    Image Name:   Linux Kernel Image
-    Created:	  2007-11-07  20:33:08 UTC
-    Image Type:   M68K Linux Kernel Image (gzip compressed)
-    Data Size:	  2053206 Bytes =  2 MB
-    Load Address: 40020000
-    Entry Point:  40020000
-    Verifying Checksum ... OK
-    Uncompressing Kernel Image ... OK
-Linux version 2.6.22-uc1 (mattw@loa) (gcc version 4.2.1 (Sourcery G++ Lite 4.2-7
-
-
-uClinux/COLDFIRE(m537x)
-COLDFIRE port done by Greg Ungerer, gerg@snapgear.com Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne Built 1 zonelists.  Total pages: 8128 Kernel command line: rootfstype=romfs PID hash table entries: 128 (order: 7, 512 bytes) Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) Memory available: 28092k/32768k RAM, (1788k kernel code, 244k data) Mount-cache hash table entries: 512
-NET: Registered protocol family 16
-USB-MCF537x: (HOST module) EHCI device is registered
-USB-MCF537x: (OTG module) EHCI device is registered
-USB-MCF537x: (OTG module) UDC device is registered
-usbcore: registered new interface driver usbfs
-usbcore: registered new interface driver hub
-usbcore: registered new device driver usb
-NET: Registered protocol family 2
-IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 1024 (order: 1, 8192 bytes) TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
-TCP: Hash tables configured (established 1024 bind 1024) TCP reno registered
-JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
-io scheduler noop registered
-io scheduler cfq registered (default)
-ColdFire internal UART serial driver version 1.00 ttyS0 at 0xfc060000 (irq = 90) is a builtin ColdFire UART
-ttyS1 at 0xfc064000 (irq = 91) is a builtin ColdFire UART
-ttyS2 at 0xfc068000 (irq = 92) is a builtin ColdFire UART RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-loop: module loaded
-nbd: registered device at major 43
-usbcore: registered new interface driver ub FEC ENET Version 0.2
-fec: PHY @ 0x1, ID 0x20005c90 -- DP83848
-eth0: ethernet 00:e0:0c:bc:e5:60
-uclinux[mtd]: RAM probe address=0x4021c22c size=0x22b000 Creating 1 MTD partitions on "RAM":
-0x00000000-0x0022b000 : "ROMfs"
-uclinux[mtd]: set ROMfs to be root filesystem NAND device: Manufacturer ID: 0x20, Chip ID: 0x73 (ST Micro NAND 16MiB 3,3V 8-b) Scanning device for bad blocks Creating 1 MTD partitions on "NAND 16MiB 3,3V 8-bit":
-0x00000000-0x01000000 : "M53xx flash partition 1"
-QSPI: spi->max_speed_hz 300000
-QSPI: Baud set to 255
-SPI: Coldfire master initialized
-M537x - Disable UART1 when using Audio
-udc: Freescale MCF53xx UDC driver version 27 October 2006 init
-udc: MCF53xx USB Device is found. ID=0x5 Rev=0x41 i2c /dev entries driver
-usbcore: registered new interface driver usbhid
-drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered
-NET: Registered protocol family 1
-NET: Registered protocol family 17
-VFS: Mounted root (romfs filesystem) readonly.
-Freeing unused kernel memory: 64k freed (0x401f5000 - 0x40204000) init started:  BusyBox v1.00 (2007.11.07-19:57+0000) multi-call binary?Setting e Mounting filesystems
-mount: Mounting devpts on /dev/pts failed: No such device
-mount: Mounting usbfs on /proc/bus/usb failed: No such file or directory Starting syslogd and klogd Setting up networking on loopback device:
-Setting up networking on eth0:
-info, udhcpc (v0.9.9-pre) started
-eth0: config: auto-negotiation on, 100FDX, 100HDX, 10FDX, 10HDX.
-debug, Sending discover...
-debug, Sending discover...
-debug, Sending select for 172.27.0.130...
-info, Lease of 172.27.0.130 obtained, lease time 43200 deleting routers
-route: SIOC[ADD|DEL]RT: No such process
-adding dns 172.27.0.1
-Starting the boa webserver:
-Setting time from ntp server: ntp.cs.strath.ac.uk
-ntp.cs.strath.ac.uk: Unknown host
-
-
-BusyBox v1.00 (2007.11.07-19:57+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands.
-
-#