Merge branch 'master' of git://git.denx.de/u-boot-coldfire

1 files changed, 181 insertions, 0 deletions

diff --git a/doc/README.m53017evb b/doc/README.m53017evb
new file mode 100644
index 0000000..60cfa95
--- /dev/null
+++ b/doc/README.m53017evb
@@ -0,0 +1,181 @@
+Freescale MCF53017EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created 10/22/08
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m53017evb/m53017evb.c	Dram setup
+- board/freescale/m53017evb/mii.c	Mii access
+- board/freescale/m53017evb/Makefile	Makefile
+- board/freescale/m53017evb/config.mk	config make
+- board/freescale/m53017evb/u-boot.lds	Linker description
+
+- cpu/mcf532x/cpu.c			cpu specific code
+- cpu/mcf532x/cpu_init.c		FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf532x/interrupts.c		cpu specific interrupt support
+- cpu/mcf532x/speed.c			system, flexbus, and cpu clock
+- cpu/mcf532x/Makefile			Makefile
+- cpu/mcf532x/config.mk			config make
+- cpu/mcf532x/start.S			start up assembly code
+
+- doc/README.m53017evb			This readme file
+
+- drivers/net/mcffec.c			ColdFire common FEC driver
+- drivers/net/mcfmii.c			ColdFire common Mii driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+- drivers/rtc/mcfrtc.c			Realtime clock Driver
+
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/fec.h		FEC structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5301x.h	mcf5301x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/m532x.h		mcf5301x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M53017EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c			Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c			Exception init code
+
+1 MCF5301x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M53017EVB Development Board
+CONFIG_MCF5301x			-- define for all MCF5301x CPUs
+CONFIG_M53015			-- define for MCF53015 CPUs
+CONFIG_M53017EVB		-- define for M53017EVB board
+
+CONFIG_MCFUART			-- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE			-- define UART baudrate
+
+CONFIG_MCFRTC			-- define to use common CF RTC driver
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
+RTC_DEBUG			-- define to show RTC debug message
+CONFIG_CMD_DATE			-- enable to use date feature in u-boot
+
+CONFIG_MCFFEC			-- define to use common CF FEC driver
+CONFIG_NET_MULTI		-- define to use multi FEC in u-boot
+CONFIG_MII			-- enable to use MII driver
+CONFIG_CF_DOMII			-- enable to use MII feature in cmd_mii.c
+CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP		-- set FEC timeout loop
+
+CONFIG_MCFTMR			-- define to use DMA timer
+CONFIG_MCFPIT			-- define to use PIT timer
+
+CONFIG_FSL_I2C			-- define to use FSL common I2C driver
+CONFIG_HARD_I2C			-- define for I2C hardware support
+CONFIG_SOFT_I2C			-- define for I2C bit-banged
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR			-- define for MBAR offset
+
+CONFIG_SYS_MBAR			-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM 	-- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5301x internal SRAM
+
+CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0x00000000-0x3FFFFFFF (1024MB)
+	DDR:		0x40000000-0x7FFFFFFF (1024MB)
+	SRAM:		0x80000000-0x8FFFFFFF (256MB)
+	IP:		0xFC000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+	linux kernel, you can customize it based on your system requirements:
+	Flash0:		0x00000000-0x00FFFFFF (16MB)
+	DDR:		0x40000000-0x4FFFFFFF (256MB)
+	SRAM:		0x80000000-0x80007FFF (32KB)
+	IP:		0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot
+   make distclean
+   make M53017EVB_config
+   make
+
+4. SCREEN DUMP
+==============
+4.1 M53017EVB Development board
+    (NOTE: May not show exactly the same)
+
+U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
+
+CPU:   Freescale MCF53015 (Mask:76 Version:0)
+       CPU CLK 240 Mhz BUS CLK 80 Mhz
+Board: Freescale M53017EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 16 MB
+In:    serial
+Out:   serial
+Err:   serial
+NAND:  16 MiB
+Net:   FEC0, FEC1
+-> print
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+hostname=M53017EVB
+netdev=eth0
+loadaddr=40010000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+gatewayip=192.168.1.1
+netmask=255.255.255.0
+ipaddr=192.168.1.3
+serverip=192.168.1.2
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 437/4092 bytes
+->