doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 231 deletions

diff --git a/doc/README.m52277evb b/doc/README.m52277evb
deleted file mode 100644
index b6e955b..0000000
--- a/doc/README.m52277evb
+++ /dev/null
@@ -1,231 +0,0 @@
-Freescale MCF52277EVB ColdFire Development Board
-================================================
-
-TsiChung Liew(Tsi-Chung.Liew@freescale.com)
-Created Jan 8, 2008
-===========================================
-
-
-Changed files:
-==============
-
-- board/freescale/m52277evb/m52277evb.c	Dram setup
-- board/freescale/m52277evb/Makefile	Makefile
-- board/freescale/m52277evb/config.mk	config make
-- board/freescale/m52277evb/u-boot.lds	Linker description
-
-- arch/m68k/cpu/mcf5227x/cpu.c		cpu specific code
-- arch/m68k/cpu/mcf5227x/cpu_init.c	FBCS, Mux pins, icache and RTC extra regs
-- arch/m68k/cpu/mcf5227x/interrupts.c	cpu specific interrupt support
-- arch/m68k/cpu/mcf5227x/speed.c		system, flexbus, and cpu clock
-- arch/m68k/cpu/mcf5227x/Makefile		Makefile
-- arch/m68k/cpu/mcf5227x/config.mk	config make
-- arch/m68k/cpu/mcf5227x/start.S		start up assembly code
-
-- doc/README.m52277evb		This readme file
-
-- drivers/serial/mcfuart.c	ColdFire common UART driver
-- drivers/rtc/mcfrtc.c		Realtime clock Driver
-
-- include/asm-m68k/bitops.h		Bit operation function export
-- include/asm-m68k/byteorder.h		Byte order functions
-- include/asm-m68k/crossbar.h		CrossBar structure and definition
-- include/asm-m68k/dspi.h		DSPI structure and definition
-- include/asm-m68k/edma.h		eDMA structure and definition
-- include/asm-m68k/flexbus.h		FlexBus structure and definition
-- include/asm-m68k/fsl_i2c.h		I2C structure and definition
-- include/asm-m68k/global_data.h	Global data structure
-- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
-- include/asm-m68k/immap_5227x.h	mcf5227x specific header file
-- include/asm-m68k/io.h			io functions
-- include/asm-m68k/lcd.h		LCD structure and definition
-- include/asm-m68k/m5227x.h		mcf5227x specific header file
-- include/asm-m68k/posix_types.h	Posix
-- include/asm-m68k/processor.h		header file
-- include/asm-m68k/ptrace.h		Exception structure
-- include/asm-m68k/rtc.h		Realtime clock header file
-- include/asm-m68k/ssi.h		SSI structure and definition
-- include/asm-m68k/string.h		String function export
-- include/asm-m68k/timer.h		Timer structure and definition
-- include/asm-m68k/types.h		Data types definition
-- include/asm-m68k/uart.h		Uart structure and definition
-- include/asm-m68k/u-boot.h		u-boot structure
-
-- include/configs/M52277EVB.h		Board specific configuration file
-
-- arch/m68k/lib/board.c			board init function
-- arch/m68k/lib/cache.c
-- arch/m68k/lib/interrupts			Coldfire common interrupt functions
-- arch/m68k/lib/m68k_linux.c
-- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
-- arch/m68k/lib/traps.c			Exception init code
-
-1 MCF52277 specific Options/Settings
-====================================
-1.1 pre-loader is no longer suppoer in this coldfire family
-
-1.2 Configuration settings for M52277EVB Development Board
-CONFIG_MCF5227x		-- define for all MCF5227x CPUs
-CONFIG_M52277		-- define for all Freescale MCF52277 CPUs
-CONFIG_M52277EVB	-- define for M52277EVB board
-
-CONFIG_MCFUART		-- define to use common CF Uart driver
-CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
-CONFIG_BAUDRATE		-- define UART baudrate
-
-CONFIG_MCFRTC		-- define to use common CF RTC driver
-CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
-CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
-RTC_DEBUG		-- define to show RTC debug message
-CONFIG_CMD_DATE		-- enable to use date feature in u-boot
-
-CONFIG_MCFTMR		-- define to use DMA timer
-CONFIG_MCFPIT		-- define to use PIT timer
-
-CONFIG_FSL_I2C		-- define to use FSL common I2C driver
-CONFIG_HARD_I2C		-- define for I2C hardware support
-CONFIG_SOFT_I2C		-- define for I2C bit-banged
-CONFIG_SYS_I2C_SPEED		-- define for I2C speed
-CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
-CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
-CONFIG_SYS_IMMR		-- define for MBAR offset
-
-CONFIG_SYS_MBAR		-- define MBAR offset
-
-CONFIG_MONITOR_IS_IN_RAM -- Not support
-
-CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF52277 internal SRAM
-
-CONFIG_SYS_CSn_BASE	-- defines the Chip Select Base register
-CONFIG_SYS_CSn_MASK	-- defines the Chip Select Mask register
-CONFIG_SYS_CSn_CTRL	-- defines the Chip Select Control register
-
-CONFIG_SYS_SDRAM_BASE	-- defines the DRAM Base
-
-CONFIG_LCD and CONFIG_CMD_USB are not supported in this current u-boot,
-update will be provided at later time
-
-2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
-===========================================
-2.1. System memory map:
-	Flash:		0x00000000-0x3FFFFFFF (1024MB)
-	DDR:		0x40000000-0x7FFFFFFF (1024MB)
-	SRAM:		0x80000000-0x8FFFFFFF (256MB)
-	IP:		0xF0000000-0xFFFFFFFF (256MB)
-
-2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
-	linux kernel, you can customize it based on your system requirements:
-	Flash0:		0x00000000-0x00FFFFFF (16MB)
-
-	DDR:		0x40000000-0x4FFFFFFF (64MB)
-	SRAM:		0x80000000-0x80007FFF (32KB)
-	IP:		0xFC000000-0xFC0FFFFF (64KB)
-
-3. COMPILATION
-==============
-3.1	To create U-Boot the gcc-4.1-xx compiler set (ColdFire ELF or
-uClinux version) from codesourcery.com was used. Download it from:
-http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
-
-3.2 Compilation
-   export CROSS_COMPILE=cross-compile-prefix
-   cd u-boot-1.x.x
-   make distclean
-   make M52277EVB_config
-   make
-
-4. SCREEN DUMP
-==============
-4.1 M52277EVB Development board
-    (NOTE: May not show exactly the same)
-
-U-Boot 1.3.1 (Jan 8 2008 - 12:44:08)
-
-CPU:   Freescale MCF52277 (Mask:6c Version:0)
-       CPU CLK 160 Mhz BUS CLK 80 Mhz FLB CLK 80 MHZ
-       INP CLK 16 Mhz VCO CLK 480 Mhz
-Board: Freescale 52277 EVB
-I2C:   ready
-DRAM:  64 MB
-FLASH: 16 MB
-In:    serial
-Out:   serial
-Err:   serial
--> print
-baudrate=115200
-hostname=M52277EVB
-inpclk=16000000
-loadaddr=(0x40000000 + 0x10000)
-load=tftp ${loadaddr) ${u-boot}
-upd=run load; run prog
-prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
-u-boot=u-boot.bin
-stdin=serial
-stdout=serial
-stderr=serial
-mem=65024k
-
-Environment size: 280/32764 bytes
--> bdinfo
-memstart    = 0x40000000
-memsize     = 0x04000000
-flashstart  = 0x00000000
-flashsize   = 0x01000000
-flashoffset = 0x00000000
-sramstart   = 0x80000000
-sramsize    = 0x00008000
-mbar        = 0xFC000000
-busfreq     =     80 MHz
-flbfreq     =     80 Mhz
-inpfreq     =     16 Mhz
-vcofreq     =    480 Mhz
-
-baudrate    = 115200 bps
-->
--> help
-?       - alias for 'help'
-base    - print or set address offset
-bdinfo  - print Board Info structure
-boot    - boot default, i.e., run 'bootcmd'
-bootd   - boot default, i.e., run 'bootcmd'
-bootelf - Boot from an ELF image in memory
-bootm   - boot application image from memory
-bootp	- boot image via network using BootP/TFTP protocol
-bootvx  - Boot vxWorks from an ELF image
-cmp     - memory compare
-coninfo - print console devices and information
-cp      - memory copy
-crc32   - checksum calculation
-date    - get/set/reset date & time
-dcache  - enable or disable data cache
-echo    - echo args to console
-erase   - erase FLASH memory
-flinfo  - print FLASH memory information
-go      - start application at address 'addr'
-help    - print online help
-i2c     - I2C sub-system
-icache  - enable or disable instruction cache
-iminfo  - print header information for application image
-imls    - list all images found in flash
-itest	- return true/false on integer compare
-loadb   - load binary file over serial line (kermit mode)
-loads   - load S-Record file over serial line
-loady   - load binary file over serial line (ymodem mode)
-loop    - infinite loop on address range
-ls	- list files in a directory (default /)
-md      - memory display
-mm      - memory modify (auto-incrementing)
-mtest   - simple RAM test
-mw      - memory write (fill)
-nm      - memory modify (constant address)
-ping	- send ICMP ECHO_REQUEST to network host
-printenv- print environment variables
-protect - enable or disable FLASH write protection
-reset   - Perform RESET of the CPU
-run     - run commands in an environment variable
-saveenv - save environment variables to persistent storage
-setenv  - set environment variables
-sleep   - delay execution for some time
-source  - run script from memory
-version - print monitor version
-->