diff options
author | Wolfgang Denk <wd@denx.de> | 2012-04-29 23:57:39 +0000 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-29 15:42:02 +0200 |
commit | 702e6014f15b307f144fa03ecaf83a8446c6802a (patch) | |
tree | 8c9360248c257f52c1487d9e6cbba3f2dc38e294 /doc/README.kmeter1 | |
parent | 631fea8f2d70aa5eb7c49b33039971dfc61bba88 (diff) | |
download | u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.zip u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.tar.gz u-boot-imx-702e6014f15b307f144fa03ecaf83a8446c6802a.tar.bz2 |
doc: cleanup - move board READMEs into respective board directories
Also drop a few files referring to no longer / not yet supported
boards.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Diffstat (limited to 'doc/README.kmeter1')
-rw-r--r-- | doc/README.kmeter1 | 91 |
1 files changed, 0 insertions, 91 deletions
diff --git a/doc/README.kmeter1 b/doc/README.kmeter1 deleted file mode 100644 index 7f4fc99..0000000 --- a/doc/README.kmeter1 +++ /dev/null @@ -1,91 +0,0 @@ -Keymile kmeter1 Board ------------------------------------------ -1. Alternative Boot EEPROM - - Upon the kmeter1 startup the I2C_1 controller is used to fetch the boot - configuration from a serial EEPROM. During the development and debugging - phase it might be helpful to apply an alternative boot configuration in - a simple way. Therefore it is an alternative boot eeprom on the PIGGY, - which can be activated by setting the "ST" jumper on the PIGGY board. - -2. Memory Map - - BaseAddr PortSz Size Device - ----------- ------ ----- ------ - 0x0000_0000 64 bit 256MB DDR - 0x8000_0000 8 bit 256KB GPIO/PIGGY on CS1 - 0xa000_0000 8 bit 256MB PAXE on CS3 - 0xe000_0000 2MB Int Mem Reg Space - 0xf000_0000 16 bit 256MB FLASH on CS0 - - - DDR-SDRAM: - The current realization is made with four 16-bits memory devices. - Mounting options have been foreseen for device architectures from - 4Mx16 to 512Mx16. The kmeter1 is equipped with four 32Mx16 devices - thus resulting in a total capacity of 256MBytes. - -3. Compilation - - Assuming you're using BASH shell: - - export CROSS_COMPILE=your-cross-compile-prefix - cd u-boot - make distclean - make kmeter1_config - make - -4. Downloading and Flashing Images - -4.0 Download over serial line using Kermit: - - loadb - [Drop to kermit: - ^\c - send <u-boot-bin-image> - c - ] - - - Or via tftp: - - tftp 10000 u-boot.bin - => run load - Using UEC0 device - TFTP from server 192.168.1.1; our IP address is 192.168.205.4 - Filename '/tftpboot/kmeter1/u-boot.bin'. - Load address: 0x200000 - Loading: ############## - done - Bytes transferred = 204204 (31dac hex) - => - -4.1 Reflash U-boot Image using U-boot - - => run update - ..... done - Un-Protected 5 sectors - - ..... done - Erased 5 sectors - Copy to Flash... done - ..... done - Protected 5 sectors - Total of 204204 bytes were the same - Saving Environment to Flash... - . done - Un-Protected 1 sectors - . done - Un-Protected 1 sectors - Erasing Flash... - . done - Erased 1 sectors - Writing to Flash... done - . done - Protected 1 sectors - . done - Protected 1 sectors - => - -5. Notes - 1) The console baudrate for kmeter1 is 115200bps. |