diff options
| author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-12-17 16:53:07 +0100 |
|---|---|---|
| committer | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-12-17 16:53:07 +0100 |
| commit | cb5473205206c7f14cbb1e747f28ec75b48826e2 (patch) | |
| tree | 8f4808d60917100b18a10b05230f7638a0a9bbcc /doc/README.imx31 | |
| parent | baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0 (diff) | |
| parent | 92c78a3bbcb2ce508b4bf1c4a1e0940406a024bb (diff) | |
| download | u-boot-imx-cb5473205206c7f14cbb1e747f28ec75b48826e2.zip u-boot-imx-cb5473205206c7f14cbb1e747f28ec75b48826e2.tar.gz u-boot-imx-cb5473205206c7f14cbb1e747f28ec75b48826e2.tar.bz2 | |
Merge branch 'fixes' into cleanups
Conflicts:
board/atmel/atngw100/atngw100.c
board/atmel/atstk1000/atstk1000.c
cpu/at32ap/at32ap700x/gpio.c
include/asm-avr32/arch-at32ap700x/clk.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1003.h
include/configs/atstk1004.h
include/configs/atstk1006.h
include/configs/favr-32-ezkit.h
include/configs/hammerhead.h
include/configs/mimc200.h
Diffstat (limited to 'doc/README.imx31')
| -rw-r--r-- | doc/README.imx31 | 29 |
1 files changed, 29 insertions, 0 deletions
diff --git a/doc/README.imx31 b/doc/README.imx31 new file mode 100644 index 0000000..91ef766 --- /dev/null +++ b/doc/README.imx31 @@ -0,0 +1,29 @@ +U-Boot for Freescale i.MX31 + +This file contains information for the port of U-Boot to the Freescale +i.MX31 SoC. + +1. CONFIGURATION OPTIONS/SETTINGS +--------------------------------- + +1.1 Configuration of MC13783 SPI bus +------------------------------------ + The power management companion chip MC13783 is connected to the + i.MX31 via an SPI bus. Use the following configuration options + to setup the bus and chip select used for a particular board. + + CONFIG_MC13783_SPI_BUS -- defines the SPI bus the MC13783 is connected to. + Note that 0 is CSPI1, 1 is CSPI2 and 2 is CSPI3. + CONFIG_MC13783_SPI_CS -- define the chip select the MC13783 s connected to. + +1.2 Timer precision +------------------- + CONFIG_MX31_TIMER_HIGH_PRECISION + + Enable higher precision timer. The low-precision timer + (default) provides approximately 4% error, whereas the + high-precision timer is about 0.4% accurate. The extra + accuracy is achieved at the cost of higher computational + overhead, which, in places where time is measured, should + not be critical, so, it should be safe to enable this + option. |