diff options
| author | Mike Nuss <mike@terascala.com> | 2008-03-03 15:27:05 -0500 |
|---|---|---|
| committer | Wolfgang Denk <wd@denx.de> | 2008-03-04 08:55:27 +0100 |
| commit | 74eb0222594fd23aafdf168e60e872814eea8b62 (patch) | |
| tree | a7457dea0e4058141886f01f5edc931e7eaecb29 /doc/README.commands.itest | |
| parent | 491fb6dea9f52fdb9cb5996e8e978b9e9685179f (diff) | |
| download | u-boot-imx-74eb0222594fd23aafdf168e60e872814eea8b62.zip u-boot-imx-74eb0222594fd23aafdf168e60e872814eea8b62.tar.gz u-boot-imx-74eb0222594fd23aafdf168e60e872814eea8b62.tar.bz2 | |
PPC4xx (Sequoia): Fix Ethernet "remote fault" problems
Every now and then a Sequoia board (or equivalent hardware) had
problems connecting to a Gigabit capable network interface.
There were differences in the PHY setup between Linux and U-Boot.
This patch fixes the problem. Apparently "remote fault" is being set,
which signals to some devices (on the other end of the cable) that a
fault has occurred, while other devices ignore it. I believe the RF bit
was causing the issue, but I removed T4 also, to match up with Linux.
Signed-off-by: Mike Nuss <mike@terascala.com>
Diffstat (limited to 'doc/README.commands.itest')
0 files changed, 0 insertions, 0 deletions