summaryrefslogtreecommitdiff
path: root/doc/README.adnpesc1
diff options
context:
space:
mode:
authorThomas Chou <thomas@wytron.com.tw>2010-05-28 10:56:50 +0800
committerScott McNutt <smcnutt@psyent.com>2010-05-28 10:56:04 -0400
commit1117cbf2adac59050af1751af6c6a524afa5c3ef (patch)
treea53832c1bcea3180e6830e8b3f9cb41adeed2d44 /doc/README.adnpesc1
parent6803336c9f21ba428f5c1b1cf825bbbac0a762e5 (diff)
downloadu-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.zip
u-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.gz
u-boot-imx-1117cbf2adac59050af1751af6c6a524afa5c3ef.tar.bz2
nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Diffstat (limited to 'doc/README.adnpesc1')
-rw-r--r--doc/README.adnpesc1235
1 files changed, 0 insertions, 235 deletions
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
deleted file mode 100644
index f9566b8..0000000
--- a/doc/README.adnpesc1
+++ /dev/null
@@ -1,235 +0,0 @@
-
- SSV ADNP/ESC1 Embedded Softcore Computing
- Nios Softcore, Altera Cyclone FPGA
-
- Last Update: February 27, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the SSV Embedded
-Nios Softcore Computing platform ADNP/ESC1. For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1s10,
-the Altera DK-1S10 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. CPU Variations
- 4. Examples
- 5. Programming U-Boot into FLASH with GERMS
- 6. Autoboot
- 7. U-Boot environment convention and update philosophy
-
-====================================================================
-
-1. Files
-=========
- board/ssv/adnpesc1/*
- include/configs/ADNPESC1.h
- include/configs/ADNPESC1_base_32.h
-
-
-2. Memory Organization
-=======================
-
-For the most part, you can put things pretty much anywhere.
-This is pretty flexible for Nios. So here we make some arbitrary
-choices & assume that the monitor is placed at the end of a memory
-resource. So you must make sure TEXT_BASE is chosen appropriately.
-This is very important if you plan to move your memory to another
-place as configured at this time!
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-(see doc/README.adnpesc1_base32 too)
-
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the ADNP/ESC1 possible.
-U-Boot supports the following CPU configurations:
-
- - SSV Basis 32 (make ADNPESC1_base_32_config)
- - SSV Basis 32 at DNP evaluation base board 2
- (make ADNPESC1_DNPEVA2_base_32_config)
-
-
-4. Examples
-============
-
-The hello_world example works fine. To try out you have to change
-the default load address from 0x0100_0000 to 0x0204_0000 in
-examples/Makefile (the real SDRAM for default board configuration).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-
-The current version of the ADNP/ESC1 port with the default
-configuration settings occupies about 97 KBytes of flash.
-A minimal configuration occupies less than 70 KByte
-(network, SPI, POST and board command support disabled). You
-can save more memory by deactivating the Hu-Shell support and
-long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
-
-To program U-Boot into the ADNP/ESC1 flash using GERMS do the
-following:
-
-1. Download U-Boot to its target run space in SDRAM:
-
- a. Close jumper RCM_EN# and push the reset button.
-
- b. From the command line, download U-Boot using the
- nios-run:
-
- $ nios-run -r u-boot.srec
-
- NOTE: In some cases this want fail. I don't know why,
- but try again.
-
-This takes about 1 minute (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.2 (Jan 30 2004 - 12:59:15)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30
- Board: SSV DilNetPC ADNP/ESC1
- Conf.: SSV Base 32 (nios_32)
- In: serial
- Out: serial
- Err: serial
- ADNPESC1 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
- Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
- following:
-
- a. From the u-boot command prompt start a binary download to SDRAM:
-
- at the SSV Basis 32 to SDRAM:
-
- ==> loadb 2000100
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
- at the SSV Basis 32 from 0x1000000 to 0x103ffff:
-
- ==> protect off 1:0-3
- ==> erase 1:0-3
-
-5. Copy the binary image from SDRAM to flash:
-
- at the SSV Basis 32 from SDRAM:
-
- ==> cp.b 2000100 1000000 $filesize
-
-U-Boot will now automatically start when the board is powered on or
-reset using the SSV Basis 32 configuration without closed RCM jumper.
-To start U-Boot with closed RCM Jumper, enter the following GERMS
-command:
-
- + g 1000000
-
-
-6. Autoboot
-===========
-
-U-Boot will try to boot a valid Nios application from Flash. For this
-it will use the deposited Hu-Shell script in environment variable
-'bootcmd' which is looking for a valid Nios application identifier
-string in Flash and go on at even its entry address. For more
-information see the next chapter.
-
-
-7. U-Boot environment convention and update philosophy
-======================================================
-
-U-Boot for the SSV ADNP/ESC1 target knows about many environment
-variables used to control the startup process, update process for
-raw Nios applications, and optionally file system image updates.
-In default configuration there are two Hu-Shell scripts to update
-the Nios application and/or the file system image:
-
-1. Update Nios application (ex. the uCLinux kernel):
-
- run 'appl_update'
-
-2. Update optional file system image (ex. RomFS image used by uCLinux):
-
- run 'fs_update'
-
-The Nios application can be any programm code generated in relation
-to the Nios application identifier -- the string "Nios" at offset
-address 0x0c. To use the scripts like described above in a secure way
-you have to check-up the next environment variables:
-
-1. update_allowed
-
- - Update switch -- must be set to '1' (one) to allow any update
- - default is '0' (zero)
-
- NOTE: You should avoid to save this variable with non zero
- value to Flash. Otherwise it would be allow any
- update process at any time!
-
-2. appl_entry_addr
-
- - Nios application area start address (usually in Flash)
- - this is the startup address for autoboot
- - each Nios application code we want to update will be copied
- to this address
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
-
-3. appl_end_addr
-
- - Nios application area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
-
-4. appl_ident_addr
-
- - address of the Nios application identification string
- - this is the address checked-up by autoboot
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
-
-5. appl_ident_str
-
- - the Nios application identification string itself
- - default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
-
-6. appl_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/linux.bin
-
-7. fs_base_addr
-
- - optionally file system area start address (usually in Flash)
- - each file system we want to update will be copied to this address
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
-
-8. fs_end_addr
-
- - optionally file system area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
-
-9. fs_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/romfs.img