diff options
author | Wolfgang Denk <wd@denx.de> | 2012-07-30 20:39:52 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2012-07-30 20:39:52 +0200 |
commit | b98b611502f5e0a85a1f8e15cf46c470cb105614 (patch) | |
tree | cafae797ef1f031088e7a988d8e1eaa36ea016a3 /doc/README.OXC | |
parent | 190649fb4309d1bc0fe7732fd0f951cb6440f935 (diff) | |
parent | 15ae8a31ca5d3860b0957edec4fca373daff6bb5 (diff) | |
download | u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.zip u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.tar.gz u-boot-imx-b98b611502f5e0a85a1f8e15cf46c470cb105614.tar.bz2 |
Merge branch 'next' of git://git.denx.de/u-boot
* 'next' of git://git.denx.de/u-boot:
MPC8xx: Fixup warning in arch/powerpc/cpu/mpc8xx/cpu.c
doc: cleanup - move board READMEs into respective board directories
net: sh_eth: add support for SH7757's GETHER
net: sh_eth: modify the definitions of regsiter
net: sh_eth: add SH_ETH_TYPE_ condition
net: sh_eth: clean up for the SH7757's code
net: fec_mxc: Fix MDC for xMII
net: fec_mxc: Fix setting of RCR for xMII
net: nfs: make NFS_TIMEOUT configurable
net: Inline the new eth_setenv_enetaddr_by_index function
net: allow setting env enetaddr from net device setting
net/designware: Consecutive writes to the same register to be avoided
CACHE: net: asix: Fix asix driver to work with data cache on
net: phy: micrel: make ksz9021 phy accessible
net: abort network initialization if the PHY driver fails
phylib: phy_startup() should return an error code on failure
net: tftp: fix type of block arg to store_block
Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'doc/README.OXC')
-rw-r--r-- | doc/README.OXC | 24 |
1 files changed, 0 insertions, 24 deletions
diff --git a/doc/README.OXC b/doc/README.OXC deleted file mode 100644 index c5db5f8..0000000 --- a/doc/README.OXC +++ /dev/null @@ -1,24 +0,0 @@ -This document contains different information about the port -of U-Boot for the OXC board designed by Lucent Technologies, -Inc. - -1. Showing activity - -U-Boot for the OXC board can show its current status using -the Active LED. This feature is configured by the following -options: - -CONFIG_SHOW_ACTIVITY - - When this option is on, the Active LED is blinking fast -when U-Boot runs in the idle loop (i.e. waits for user -commands from serial console) and blinking slow when it -downloads an image over network. When U-Boot loads an image -over serial line the Active LED does not blink and its state -is random (i.e. either constant on or constant off). - -CONFIG_SHOW_BOOT_PROGRESS - - When this option is on, U-Boot switches the Active LED -off before booting an image and switches it on if booting -failed due to some reasons. |