* Patch by Detlev Zundel, 08 Sep 2004:

  Update etags build target

* Improve NetConsole support: add support for broadcast destination
  address and buffered input.

* Cleanup compiler warnings for GCC 3.3.x and later

* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch

1 files changed, 21 insertions, 0 deletions

diff --git a/doc/README.NetConsole b/doc/README.NetConsole
index 8dc0d29..aa13627 100644
--- a/doc/README.NetConsole
+++ b/doc/README.NetConsole
@@ -6,6 +6,12 @@ serial and network input/output devices by adjusting the 'stdin' and
 set either of these variables to "nc". Input and output can be
 switched independently.
 
+We use an environment variable 'ncip' to set the IP address and the
+port of the destination. The format is <ip_addr>:<port>. If <port> is
+omitted, the value of 6666 is used. If the env var doesn't exist, the
+broadcast address and port 6666 are used. If it is set to an IP
+address of 0 (or 0.0.0.0) then no messages are sent to the network.
+
 On the host side, please use this script to access the console:
 
 +++++++++++++++++++++++++++++++++++++++++++
@@ -19,6 +25,21 @@ nc -u ${TARGET_IP} 6666
 stty icanon echo intr ^C
 +++++++++++++++++++++++++++++++++++++++++++
 
+It turned out that 'netcat' couldn't be used to listen to broadcast
+packets. We developed our own tool 'ncb' (see tools directory) that
+listens to broadcast packets on a given port and dumps them to the
+standard output. use it as follows:
+
++++++++++++++++++++++++++++++++++++++++++++
+#! /bin/bash
+
+stty icanon echo intr ^T
+./ncb &
+nc -u mpc5200 6666
+stty icanon echo intr ^C
+kill 0
++++++++++++++++++++++++++++++++++++++++++++
+
 For Linux, the network-based console needs special configuration.
 Minimally, the host IP address needs to be specified. This can be
 done either via the kernel command line, or by passing parameters