doc: cleanup - move board READMEs into respective board directories

Also drop a few files referring to no longer / not yet supported
boards.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Kim Phillips <kim.phillips@freescale.com>
Cc: Andy Fleming <afleming@gmail.com>
Cc: Jason Jin <jason.jin@freescale.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>

1 files changed, 0 insertions, 156 deletions

diff --git a/doc/README.COBRA5272 b/doc/README.COBRA5272
deleted file mode 100644
index ae0f148..0000000
--- a/doc/README.COBRA5272
+++ /dev/null
@@ -1,156 +0,0 @@
-File:		README.COBRA5272
-Author:		Florian Schlote for Sentec elektronik (linux@sentec-elektronik.de)
-Contents:	This is the README of u-boot (Universal bootloader) for our
-		COBRA5272 board.
-Version:	v01.00
-Date:		Tue Mar 30 00:28:33 CEST 2004
-License:	This document is published under the GNU GPL
-______________________________________________________________________
-
-CHANGES
-040330   v01.00 Creation
-
-______________________________________________________________________
-
-
-CONFIGURING
------------
-
-1. Modify include/configs/cobra5272.h acc. to your prefs
-
-2. If necessary, modify board/cobra5272/config.mk (see below)
-
-3.
-
-> make cobra5272_config
-
-> make
-
-
-Please refer to u-boot README (general info, u-boot-x-x-x/README),
-to u-boot-x-x-x/doc/README.COBRA5272 and
-to the comments in u-boot-x-x-x/include/configs/cobra5272.h
-
-Configuring u-boot is done by commenting/uncommenting preprocessor defines.
-
-Default configuration is
-
-	FLASH version (for further info see subsection below)
-	link address 0xffe00000
-
-	16 MB RAM
-
-	network enabled
-	no default IP address for target, host set, no MACaddress set
-
-	bootdelay for autoboot 5 sec.
-	autoboot disabled
-
-
-#-----------------------------------
-# u-boot FLASH version & RAM version
-#-----------------------------------
-
-The u-boot bootloader for Coldfire processors can be configured
-
-	1. as a standalone bootloader residing in flash & relocating itself to RAM on
-	startup automatically => "FLASH version"
-
-	2. as a RAM version which will not load from flash automatically as it needs a
-	prestage bootloader ("chainloading") & is running only from the RAM address it
-	is linked to => "RAM version"
-
-	This version may be very helpful when installing u-boot for the first time
-	since it can be used to make available s. th. like a "bootstrap
-	mechanism".
-
-
-How to build the different images:
-
-------------------------------
-Flash version
-------------------------------
-
-Compile u-boot
-
-in dir ./u-boot-x-x-x/
-
-please first check:
-
-	in ./include/configs/cobra5272.h
-
-		CONFIG_MONITOR_IS_IN_RAM has to be undefined, e. g. as follows:
-
-		#if 0
-			#define CONFIG_MONITOR_IS_IN_RAM
-			/* define if monitor is started from a pre-loader */
-		#endif
-
-	=> u-boot as single bootloader starting from flash
-
-
-	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
-
-		CONFIG_SYS_TEXT_BASE = 0xffe00000
-
-	=> linking address for u-boot as single bootloader stored in flash
-
-then:
-
-	host> make cobra5272_config
-		rm -f include/config.h include/config.mk
-		Configuring for cobra5272 board...
-	host> make
-		[...]
-
-	host> cp u-boot.bin /tftpboot/u-boot_flash.bin
-
-
-------------------------------
-RAM version
-------------------------------
-
-in dir ./u-boot-x-x-x/
-
-	host> make distclean
-
-please modify the settings:
-
-	in ./include/configs/cobra5272.h
-
-		CONFIG_MONITOR_IS_IN_RAM now has to be defined, e. g. as follows:
-
-		#if 1
-			#define CONFIG_MONITOR_IS_IN_RAM
-			/*define if monitor is started from a pre-loader */
-		#endif
-
-	=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
-
-
-	in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
-
-		CONFIG_SYS_TEXT_BASE = 0x00020000
-
-	=> target linking address for RAM
-
-
-then:
-
-	host> make cobra5272_config
-		rm -f include/config.h include/config.mk
-		Configuring for cobra5272 board...
-	host> make
-		[...]
-
-	host> cp u-boot.bin /tftpboot/u-boot_ram.bin
-
-
-----
-HINT
-----
-
-If the m68k-elf-toolchain & the m68k-bdm-gdb is installed you can run the RAM
-version by typing (in dir ./u-boot-x-x-x/)
-"board/cobra5272/bdm/load-cobra_uboot" ,
-in ./u-boot-x-x-x/ the RAM version u-boot (elf format) has to be available.