Merge commit 'wd/master'

8 files changed, 63 insertions, 42 deletions

diff --git a/cpu/ixp/npe/npe.c b/cpu/ixp/npe/npe.c
index 7e4af44..a33b956 100644
--- a/cpu/ixp/npe/npe.c
+++ b/cpu/ixp/npe/npe.c
@@ -408,25 +408,25 @@ static int npe_init(struct eth_device *dev, bd_t * bis)
 	if (ixEthAccPortRxCallbackRegister(p_npe->eth_id, npe_rx_callback,
 					   (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
 		printf("can't register RX callback!\n");
-		return 0;
+		return -1;
 	}
 
 	if (ixEthAccPortTxDoneCallbackRegister(p_npe->eth_id, npe_tx_callback,
 					       (u32)p_npe) != IX_ETH_ACC_SUCCESS) {
 		printf("can't register TX callback!\n");
-		return 0;
+		return -1;
 	}
 
 	npe_set_mac_address(dev);
 
 	if (ixEthAccPortEnable(p_npe->eth_id) != IX_ETH_ACC_SUCCESS) {
 		printf("can't enable port!\n");
-		return 0;
+		return -1;
 	}
 
 	p_npe->active = 1;
 
-	return 1;
+	return 0;
 }
 
 #if 0 /* test-only: probably have to deal with it when booting linux (for a clean state) */
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
index 737a6c4..0ce17e7 100644
--- a/cpu/mpc85xx/fdt.c
+++ b/cpu/mpc85xx/fdt.c
@@ -43,8 +43,11 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
 #ifdef CONFIG_QE
-	do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
+	do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
 		"bus-frequency", bd->bi_busfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "qe", 4,
+			"brg-frequency", bd->bi_busfreq / 2, 1);
+	fdt_fixup_qe_firmware(blob);
 #endif
 
 #ifdef CFG_NS16550
diff --git a/cpu/mpc85xx/spd_sdram.c b/cpu/mpc85xx/spd_sdram.c
index 553f736..adc9c4d 100644
--- a/cpu/mpc85xx/spd_sdram.c
+++ b/cpu/mpc85xx/spd_sdram.c
@@ -1071,22 +1071,19 @@ setup_laws_and_tlbs(unsigned int memsize)
 	ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
 	while (ram_tlb_address < (memsize * 1024 * 1024)
 	      && ram_tlb_index < 16) {
-		mtspr(MAS0, TLB1_MAS0(1, ram_tlb_index, 0));
-		mtspr(MAS1, TLB1_MAS1(1, 1, 0, 0, tlb_size));
-		mtspr(MAS2, TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
-				      0, 0, 0, 0, 0, 0, 0, 0));
-		mtspr(MAS3, TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
-				      0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+		mtspr(MAS0, FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
+		mtspr(MAS1, FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
+		mtspr(MAS2, FSL_BOOKE_MAS2(ram_tlb_address, 0));
+		mtspr(MAS3, FSL_BOOKE_MAS3(ram_tlb_address, 0,
+			(MAS3_SX|MAS3_SW|MAS3_SR)));
 		asm volatile("isync;msync;tlbwe;isync");
 
-		debug("DDR: MAS0=0x%08x\n", TLB1_MAS0(1, ram_tlb_index, 0));
-		debug("DDR: MAS1=0x%08x\n", TLB1_MAS1(1, 1, 0, 0, tlb_size));
-		debug("DDR: MAS2=0x%08x\n",
-		      TLB1_MAS2(E500_TLB_EPN(ram_tlb_address),
-				0, 0, 0, 0, 0, 0, 0, 0));
+		debug("DDR: MAS0=0x%08x\n", FSL_BOOKE_MAS0(1, ram_tlb_index, 0));
+		debug("DDR: MAS1=0x%08x\n", FSL_BOOKE_MAS1(1, 1, 0, 0, tlb_size));
+		debug("DDR: MAS2=0x%08x\n", FSL_BOOKE_MAS2(ram_tlb_address, 0));
 		debug("DDR: MAS3=0x%08x\n",
-		      TLB1_MAS3(E500_TLB_RPN(ram_tlb_address),
-				0, 0, 0, 0, 0, 1, 0, 1, 0, 1));
+			FSL_BOOKE_MAS3(ram_tlb_address, 0,
+			              (MAS3_SX|MAS3_SW|MAS3_SR)));
 
 		ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
 		ram_tlb_index++;
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
index b769ef8..b489d2f 100644
--- a/cpu/mpc85xx/start.S
+++ b/cpu/mpc85xx/start.S
@@ -268,7 +268,10 @@ _start_e500:
 	 */
 	lis	r3,CFG_INIT_RAM_ADDR@h
 	ori	r3,r3,CFG_INIT_RAM_ADDR@l
-	li	r2,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
+	mfspr	r2, L1CFG0
+	andi.	r2, r2, 0x1ff
+	/* cache size * 1024 / (2 * L1 line size) */
+	slwi	r2, r2, (10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r2
 	li	r0,0
 1:
@@ -1061,7 +1064,9 @@ unlock_ram_in_cache:
 	/* invalidate the INIT_RAM section */
 	lis	r3,(CFG_INIT_RAM_ADDR & ~31)@h
 	ori	r3,r3,(CFG_INIT_RAM_ADDR & ~31)@l
-	li	r4,(CFG_DCACHE_SIZE / (2 * CFG_CACHELINE_SIZE))
+	mfspr	r4,L1CFG0
+	andi.	r4,r4,0x1ff
+	slwi	r4,r4,(10 - 1 - L1_CACHE_SHIFT)
 	mtctr	r4
 1:	icbi	r0,r3
 	dcbi	r0,r3
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
index da473ca..5a31413 100644
--- a/cpu/mpc8xx/fec.c
+++ b/cpu/mpc8xx/fec.c
@@ -727,7 +727,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 
 		if (efis->actual_phy_addr == -1) {
 			printf ("Unable to discover phy!\n");
-			return 0;
+			return -1;
 		}
 #else
 		efis->actual_phy_addr = -1;
@@ -763,7 +763,7 @@ static int fec_init (struct eth_device *dev, bd_t * bd)
 
 	efis->initialized = 1;
 
-	return 1;
+	return 0;
 }
 
 
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index a68c419..a5b9690 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -339,7 +339,7 @@ void pci_405gp_init(struct pci_controller *hose)
 }
 
 /*
- * drivers/pci.c skips every host bridge but the 405GP since it could
+ * drivers/pci/pci.c skips every host bridge but the 405GP since it could
  * be set as an Adapter.
  *
  * I (Andrew May) don't know what we should do here, but I don't want
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index b922485..31f408d 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -57,7 +57,7 @@ _fiq:			.word fiq
  * Startup Code (reset vector)
  *
  * do important init only if we don't start from RAM!
- * - relocate armboot to ram
+ * - relocate armboot to RAM
  * - setup stack
  * - jump to second stage
  */
@@ -90,7 +90,7 @@ IRQ_STACK_START:
 .globl FIQ_STACK_START
 FIQ_STACK_START:
 	.word 0x0badc0de
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 
 /****************************************************************************/
@@ -100,18 +100,18 @@ FIQ_STACK_START:
 /****************************************************************************/
 
 reset:
-	mrs	r0,cpsr			/* set the cpu to SVC32 mode	    */
+	mrs	r0,cpsr			/* set the CPU to SVC32 mode	    */
 	bic	r0,r0,#0x1f		/* (superviser mode, M=10011)	    */
 	orr	r0,r0,#0x13
 	msr	cpsr,r0
 
 	/*
 	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
+	 * not when booting from RAM!
 	 */
 #ifndef CONFIG_SKIP_LOWLEVEL_INIT
 	bl	cpu_init_crit		/* we do sys-critical inits	    */
-#endif
+#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
 
 #ifndef CONFIG_SKIP_RELOCATE_UBOOT
 relocate:				/* relocate U-Boot to RAM	    */
@@ -130,7 +130,7 @@ copy_loop:
 	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
 	cmp	r0, r2			/* until source end addreee [r2]    */
 	ble	copy_loop
-#endif	/* CONFIG_SKIP_RELOCATE_UBOOT */
+#endif /* !CONFIG_SKIP_RELOCATE_UBOOT */
 
 	/* Set up the stack						    */
 stack_setup:
@@ -139,7 +139,7 @@ stack_setup:
 	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
+#endif /* CONFIG_USE_IRQ */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 
 clear_bss:
@@ -172,11 +172,11 @@ _start_armboot: .word start_armboot
 #undef OSCR
 #undef OWER
 #undef OIER
-#endif
+#endif /* CONFIG_PXA250 || CONFIG_CPU_MONAHANS */
 #ifdef CONFIG_PXA250
 #undef RCSR
 #undef CCCR
-#endif
+#endif /* CONFIG_PXA250 */
 
 /* Interrupt-Controller base address					    */
 IC_BASE:	   .word	   0x40d00000
@@ -197,18 +197,18 @@ OSTIMER_BASE:	.word	0x40a00000
 #ifdef CONFIG_CPU_MONAHANS
 # ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
 #  error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif
+# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
 # ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
 #  define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif
-#else /* ! CONFIG_CPU_MONAHANS */
+# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
 cpuspeed:	.word	CFG_CPUSPEED
-#else
+#else /* !CFG_CPUSPEED */
 #error "You have to define CFG_CPUSPEED!!"
-#endif
+#endif /* CFG_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/* takes care the CP15 update has taken place */
@@ -225,7 +225,7 @@ cpu_init_crit:
 	ldr	r0, IC_BASE
 	mov	r1, #0x00
 	str	r1, [r0, #ICMR]
-#else
+#else /* CONFIG_CPU_MONAHANS */
 	/* Step 1 - Enable CP6 permission */
 	mrc	p15, 0, r1, c15, c1, 0	@ read CPAR
 	orr	r1, r1, #0x40
@@ -244,14 +244,14 @@ cpu_init_crit:
 	ldr	r1, =CKENB
 	ldr	r2, =(CKENB_6_IRQ)
 	str	r2, [r1]
-#endif
+#endif /* !CONFIG_CPU_MONAHANS */
 
 	/* set clock speed */
 #ifdef CONFIG_CPU_MONAHANS
 	ldr	r0, =ACCR
 	ldr	r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
 	str	r1, [r0]
-#else /* ! CONFIG_CPU_MONAHANS */
+#else /* !CONFIG_CPU_MONAHANS */
 #ifdef CFG_CPUSPEED
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
@@ -451,7 +451,7 @@ fiq:
 	bl	do_fiq			/* effiction fiq_save_user_regs	    */
 	irq_restore_user_regs
 
-#else
+#else /* !CONFIG_USE_IRQ */
 
 	.align	5
 irq:
@@ -465,7 +465,7 @@ fiq:
 	bad_save_user_regs
 	bl	do_fiq
 
-#endif
+#endif /* CONFIG_USE_IRQ */
 
 /****************************************************************************/
 /*									    */
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
index 72b7dfa..aa6f4b7 100644
--- a/cpu/pxa/usb.c
+++ b/cpu/pxa/usb.c
@@ -89,6 +89,22 @@ int usb_cpu_stop(void)
 
 int usb_cpu_init_fail(void)
 {
+	UHCHR |= UHCHR_FHR;
+	udelay(11);
+	UHCHR &= ~UHCHR_FHR;
+
+	UHCCOMS |= 1;
+	udelay(10);
+
+#if defined(CONFIG_CPU_MONAHANS)
+	UHCHR |= UHCHR_SSEP0;
+#endif
+#if defined(CONFIG_PXA27X)
+	UHCHR |= UHCHR_SSEP2;
+#endif
+	UHCHR |= UHCHR_SSEP1;
+	UHCHR |= UHCHR_SSE;
+
 	return 0;
 }