Merge branch 'master' of git://git.denx.de/u-boot-blackfin

3 files changed, 37 insertions, 3 deletions

diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c
index 3120447..aba00e0 100644
--- a/cpu/blackfin/initcode.c
+++ b/cpu/blackfin/initcode.c
@@ -246,6 +246,15 @@ static inline void serial_putc(char c)
 #endif
 #endif
 
+/* Conflicting Column Address Widths Causes SDRAM Errors:
+ * EB2CAW and EB3CAW must be the same
+ */
+#if ANOMALY_05000362
+# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000)
+#  error "Anomaly 05000362: EB2CAW and EB3CAW must be the same"
+# endif
+#endif
+
 BOOTROM_CALLED_FUNC_ATTR
 void initcode(ADI_BOOT_DATA *bootstruct)
 {
@@ -335,6 +344,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 	if (!ANOMALY_05000386) {
 		serial_putc('F');
 
+		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
 		ADI_SYSCTRL_VALUES memory_settings;
 		uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT;
 		if (CONFIG_HAS_VR) {
@@ -356,6 +366,10 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 #if ANOMALY_05000432
 		bfin_write_SIC_IWR1(-1);
 #endif
+#if ANOMALY_05000171
+		bfin_write_SICA_IWR0(-1);
+		bfin_write_SICA_IWR1(-1);
+#endif
 	} else {
 		serial_putc('G');
 
@@ -375,6 +389,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 
 		serial_putc('H');
 
+		/* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */
 		bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL);
 
 		serial_putc('I');
@@ -397,7 +412,7 @@ void initcode(ADI_BOOT_DATA *bootstruct)
 		/* Only reprogram when needed to avoid triggering unnecessary
 		 * PLL relock sequences.
 		 */
-		if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
+		if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) {
 			serial_putc('!');
 			bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL);
 			asm("idle;");
diff --git a/cpu/blackfin/serial.c b/cpu/blackfin/serial.c
index 3861955..2abda18 100644
--- a/cpu/blackfin/serial.c
+++ b/cpu/blackfin/serial.c
@@ -24,6 +24,19 @@
  * Licensed under the GPL-2 or later.
  */
 
+/* Anomaly notes:
+ *  05000086 - we don't support autobaud
+ *  05000099 - we only use DR bit, so losing others is not a problem
+ *  05000100 - we don't use the UART_IIR register
+ *  05000215 - we poll the uart (no dma/interrupts)
+ *  05000225 - no workaround possible, but this shouldnt cause errors ...
+ *  05000230 - we tweak the baud rate calculation slightly
+ *  05000231 - we always use 1 stop bit
+ *  05000309 - we always enable the uart before we modify it in anyway
+ *  05000350 - we always enable the uart regardless of boot mode
+ *  05000363 - we don't support break signals, so don't generate one
+ */
+
 #include <common.h>
 #include <watchdog.h>
 #include <asm/blackfin.h>
@@ -43,7 +56,9 @@ uint16_t cached_rbr[256];
 size_t cache_count;
 
 /* The LSR is read-to-clear on some parts, so we have to make sure status
- * bits aren't inadvertently lost when doing various tests.
+ * bits aren't inadvertently lost when doing various tests.  This also
+ * works around anomaly 05000099 at the same time by keeping a cumulative
+ * tally of all the status bits.
  */
 static uint16_t uart_lsr_save;
 static uint16_t uart_lsr_read(void)
@@ -59,6 +74,10 @@ static void uart_lsr_clear(void)
 	*pUART_LSR |= -1;
 }
 #else
+/* When debugging is disabled, we only care about the DR bit, so if other
+ * bits get set/cleared, we don't really care since we don't read them
+ * anyways (and thus anomaly 05000099 is irrelevant).
+ */
 static inline uint16_t uart_lsr_read(void) { return *pUART_LSR; }
 static inline void uart_lsr_clear(void) { *pUART_LSR = -1; }
 #endif
diff --git a/cpu/blackfin/serial.h b/cpu/blackfin/serial.h
index ce39148..7b47878 100644
--- a/cpu/blackfin/serial.h
+++ b/cpu/blackfin/serial.h
@@ -146,7 +146,7 @@ static inline void serial_early_init(void)
 	/* handle portmux crap on different Blackfins */
 	serial_do_portmux();
 
-	/* Enable UART */
+	/* always enable UART -- avoids anomalies 05000309 and 05000350 */
 	*pUART_GCTL = UCEN;
 
 	/* Set LCR to Word Lengh 8-bit word select */