OMAP3: Use functions print_cpuinfo() and checkboard()

Use the functions print_cpuinfo() and checkboard() to
display the cpu and board specific information.

These functions reuse content from the existing function
display_board_info() - which has been removed.

Also, updated the existig OMAP3 configurations to
define:
 - CONFIG_DISPLAY_CPUINFO
 - CONFIG_DISPLAY_BOARDINFO

Signed-off-by: Sanjeev Premi <premi@ti.com>

2 files changed, 72 insertions, 60 deletions

diff --git a/cpu/arm_cortexa8/omap3/board.c b/cpu/arm_cortexa8/omap3/board.c
index 15ea936..51d5cf6 100644
--- a/cpu/arm_cortexa8/omap3/board.c
+++ b/cpu/arm_cortexa8/omap3/board.c
@@ -39,6 +39,8 @@
 
 extern omap3_sysinfo sysinfo;
 
+extern u32 is_mem_sdr(void);
+
 /******************************************************************************
  * Routine: delay
  * Description: spinning delay to use before udelay works
@@ -272,11 +274,6 @@ int dram_init(void)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 	unsigned int size0 = 0, size1 = 0;
-	u32 btype;
-
-	btype = get_board_type();
-
-	display_board_info(btype);
 
 	/*
 	 * If a second bank of DDR is attached to CS1 this is
@@ -342,3 +339,23 @@ U_BOOT_CMD(
 	);
 
 #endif /* CONFIG_NAND_OMAP_GPMC */
+
+#ifdef CONFIG_DISPLAY_BOARDINFO
+/**
+ * Print board information
+ */
+int checkboard (void)
+{
+	char *mem_s ;
+
+	if (is_mem_sdr())
+		mem_s = "mSDR";
+	else
+		mem_s = "LPDDR";
+
+	printf("%s + %s/%s\n", sysinfo.board_string, mem_s,
+			sysinfo.nand_string);
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_BOARDINFO */
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index b385b91..d605d7c 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -185,61 +185,6 @@ u32 get_board_rev(void)
 	return 0x20;
 }
 
-/*********************************************************************
- *  display_board_info() - print banner with board info.
- *********************************************************************/
-void display_board_info(u32 btype)
-{
-	char *cpu_s, *mem_s, *sec_s;
-
-	switch (get_cpu_type()) {
-	case OMAP3503:
-		cpu_s = "3503";
-		break;
-	case OMAP3515:
-		cpu_s = "3515";
-		break;
-	case OMAP3525:
-		cpu_s = "3525";
-		break;
-	case OMAP3530:
-		cpu_s = "3530";
-		break;
-	default:
-		cpu_s = "35XX";
-		break;
-	}
-
-	if (is_mem_sdr())
-		mem_s = "mSDR";
-	else
-		mem_s = "LPDDR";
-
-	switch (get_device_type()) {
-	case TST_DEVICE:
-		sec_s = "TST";
-		break;
-	case EMU_DEVICE:
-		sec_s = "EMU";
-		break;
-	case HS_DEVICE:
-		sec_s = "HS";
-		break;
-	case GP_DEVICE:
-		sec_s = "GP";
-		break;
-	default:
-		sec_s = "?";
-	}
-
-
-	printf("OMAP%s-%s rev %d, CPU-OPP2 L3-165MHz\n", cpu_s,
-	       sec_s, get_cpu_rev());
-	printf("%s + %s/%s\n", sysinfo.board_string,
-	       mem_s, sysinfo.nand_string);
-
-}
-
 /********************************************************
  *  get_base(); get upper addr of current execution
  *******************************************************/
@@ -305,3 +250,53 @@ u32 get_device_type(void)
 {
 	return ((readl(&ctrl_base->status) & (DEVICE_MASK)) >> 8);
 }
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+/**
+ * Print CPU information
+ */
+int print_cpuinfo (void)
+{
+	char *cpu_s, *sec_s;
+
+	switch (get_cpu_type()) {
+	case OMAP3503:
+		cpu_s = "3503";
+		break;
+	case OMAP3515:
+		cpu_s = "3515";
+		break;
+	case OMAP3525:
+		cpu_s = "3525";
+		break;
+	case OMAP3530:
+		cpu_s = "3530";
+		break;
+	default:
+		cpu_s = "35XX";
+		break;
+	}
+
+	switch (get_device_type()) {
+	case TST_DEVICE:
+		sec_s = "TST";
+		break;
+	case EMU_DEVICE:
+		sec_s = "EMU";
+		break;
+	case HS_DEVICE:
+		sec_s = "HS";
+		break;
+	case GP_DEVICE:
+		sec_s = "GP";
+		break;
+	default:
+		sec_s = "?";
+	}
+
+	printf("OMAP%s-%s rev %d, CPU-OPP2 L3-165MHz\n", cpu_s,
+	       sec_s, get_cpu_rev());
+
+	return 0;
+}
+#endif	/* CONFIG_DISPLAY_CPUINFO */