ppc4xx: Add NAND booting support for AMCC Acadia (405EZ) eval board

This patch adds NAND booting support for the AMCC Acadia eval board.

Please make sure to configure jumper J7 to position 2-3 when booting
from NOR, and to position 1-2 when booting for NAND.

I also added a board command to configure the I2C bootstrap EEPROM
values. Right now only 267MHz is support for booting either via NOR
or NAND FLASH. Here the usage:

=> bootstrap 267 nor	;to configure the board for 267MHz NOR booting
=> bootstrap 267 nand	;to configure the board for 267MHz NNAND booting

Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 55 insertions, 17 deletions

diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 78de300..78d0042 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -155,7 +155,9 @@
 	 * NAND U-Boot image is started from offset 0
 	 */
 	.text
+#if defined(CONFIG_440)
 	bl	reconfig_tlb0
+#endif
 	GET_GOT
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 	bl	board_init_f
@@ -857,6 +859,38 @@ _start:
 #endif /* CONFIG_405EZ */
 #endif
 
+#ifdef CONFIG_NAND_SPL
+	/*
+	 * Copy SPL from cache into internal SRAM
+	 */
+	li	r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+	mtctr	r4
+	lis	r2,CFG_NAND_BOOT_SPL_SRC@h
+	ori	r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+	lis	r3,CFG_NAND_BOOT_SPL_DST@h
+	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+	lwzu	r4,4(r2)
+	stwu	r4,4(r3)
+	bdnz	spl_loop
+
+	/*
+	 * Jump to code in RAM
+	 */
+	bl	00f
+00:	mflr	r10
+	lis	r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+	ori	r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+	sub	r10,r10,r3
+	addi	r10,r10,28
+	mtlr	r10
+	blr
+
+start_ram:
+	sync
+	isync
+#endif /* CONFIG_NAND_SPL */
+
 	/*----------------------------------------------------------------------- */
 	/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
 	/*----------------------------------------------------------------------- */
@@ -967,12 +1001,16 @@ _start:
 	stw	r0, +12(r1)		/* Save return addr (underflow vect) */
 #endif /* !(CFG_INIT_DCACHE_CS	|| !CFG_TEM_STACK_OCM) */
 
+#ifdef CONFIG_NAND_SPL
+	bl	nand_boot		/* will not return */
+#else
 	GET_GOT			/* initialize GOT access			*/
 
 	bl	cpu_init_f	/* run low-level CPU init code	   (from Flash) */
 
 	/* NEVER RETURNS! */
 	bl	board_init_f	/* run first part of init code (from Flash)	*/
+#endif /* CONFIG_NAND_SPL */
 
 #endif	/* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
 	/*----------------------------------------------------------------------- */
@@ -1187,23 +1225,6 @@ crit_return:
 
 /* Cache functions.
 */
-invalidate_icache:
-	iccci	r0,r0			/* for 405, iccci invalidates the */
-	blr				/*   entire I cache */
-
-invalidate_dcache:
-	addi	r6,0,0x0000		/* clear GPR 6 */
-	/* Do loop for # of dcache congruence classes. */
-	lis	r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS for large sized cache */
-	ori	r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
-					/* NOTE: dccci invalidates both */
-	mtctr	r7			/* ways in the D cache */
-..dcloop:
-	dccci	0,r6			/* invalidate line */
-	addi	r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
-	bdnz	..dcloop
-	blr
-
 flush_dcache:
 	addis	r9,r0,0x0002		/* set mask for EE and CE msr bits */
 	ori	r9,r9,0x8000
@@ -1734,6 +1755,23 @@ in32:
 	lwz	3,0x0000(3)
 	blr
 
+invalidate_icache:
+	iccci	r0,r0			/* for 405, iccci invalidates the */
+	blr				/*   entire I cache */
+
+invalidate_dcache:
+	addi	r6,0,0x0000		/* clear GPR 6 */
+	/* Do loop for # of dcache congruence classes. */
+	lis	r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@ha	/* TBS for large sized cache */
+	ori	r7, r7, (CFG_DCACHE_SIZE / CFG_CACHELINE_SIZE / 2)@l
+					/* NOTE: dccci invalidates both */
+	mtctr	r7			/* ways in the D cache */
+..dcloop:
+	dccci	0,r6			/* invalidate line */
+	addi	r6,r6, CFG_CACHELINE_SIZE /* bump to next line */
+	bdnz	..dcloop
+	blr
+
 /**************************************************************************/
 /* PPC405EP specific stuff						  */
 /**************************************************************************/