summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
authorPeter Tyser <ptyser@xes-inc.com>2010-04-12 22:28:09 -0500
committerWolfgang Denk <wd@denx.de>2010-04-13 09:13:16 +0200
commit8d1f268204b07e172f3cb5cee0a3974d605b0b98 (patch)
treec3359e920cc886e7060fb099bf933496aca37153 /cpu
parent819833af39a91fa1c1e8252862bbda6f5a602f7b (diff)
downloadu-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.zip
u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.gz
u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.bz2
ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'cpu')
-rw-r--r--cpu/74xx_7xx/Makefile51
-rw-r--r--cpu/74xx_7xx/cache.S404
-rw-r--r--cpu/74xx_7xx/config.mk26
-rw-r--r--cpu/74xx_7xx/cpu.c320
-rw-r--r--cpu/74xx_7xx/cpu_init.c63
-rw-r--r--cpu/74xx_7xx/interrupts.c105
-rw-r--r--cpu/74xx_7xx/io.S128
-rw-r--r--cpu/74xx_7xx/kgdb.S77
-rw-r--r--cpu/74xx_7xx/speed.c185
-rw-r--r--cpu/74xx_7xx/start.S874
-rw-r--r--cpu/74xx_7xx/traps.c252
-rw-r--r--cpu/mpc512x/Makefile63
-rw-r--r--cpu/mpc512x/asm-offsets.h15
-rw-r--r--cpu/mpc512x/config.mk29
-rw-r--r--cpu/mpc512x/cpu.c216
-rw-r--r--cpu/mpc512x/cpu_init.c92
-rw-r--r--cpu/mpc512x/diu.c188
-rw-r--r--cpu/mpc512x/fixed_sdram.c152
-rw-r--r--cpu/mpc512x/i2c.c403
-rw-r--r--cpu/mpc512x/ide.c128
-rw-r--r--cpu/mpc512x/iim.c394
-rw-r--r--cpu/mpc512x/interrupts.c61
-rw-r--r--cpu/mpc512x/iopin.c49
-rw-r--r--cpu/mpc512x/pci.c227
-rw-r--r--cpu/mpc512x/serial.c193
-rw-r--r--cpu/mpc512x/speed.c156
-rw-r--r--cpu/mpc512x/start.S711
-rw-r--r--cpu/mpc512x/traps.c212
-rw-r--r--cpu/mpc512x/u-boot.lds120
-rw-r--r--cpu/mpc5xx/Makefile59
-rw-r--r--cpu/mpc5xx/config.mk36
-rw-r--r--cpu/mpc5xx/cpu.c171
-rw-r--r--cpu/mpc5xx/cpu_init.c123
-rw-r--r--cpu/mpc5xx/interrupts.c207
-rw-r--r--cpu/mpc5xx/serial.c170
-rw-r--r--cpu/mpc5xx/speed.c67
-rw-r--r--cpu/mpc5xx/spi.c412
-rw-r--r--cpu/mpc5xx/start.S576
-rw-r--r--cpu/mpc5xx/traps.c227
-rw-r--r--cpu/mpc5xx/u-boot.lds137
-rw-r--r--cpu/mpc5xxx/Makefile49
-rw-r--r--cpu/mpc5xxx/config.mk30
-rw-r--r--cpu/mpc5xxx/cpu.c205
-rw-r--r--cpu/mpc5xxx/cpu_init.c233
-rw-r--r--cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S359
-rw-r--r--cpu/mpc5xxx/i2c.c442
-rw-r--r--cpu/mpc5xxx/ide.c99
-rw-r--r--cpu/mpc5xxx/interrupts.c346
-rw-r--r--cpu/mpc5xxx/io.S128
-rw-r--r--cpu/mpc5xxx/loadtask.c76
-rw-r--r--cpu/mpc5xxx/pci_mpc5200.c187
-rw-r--r--cpu/mpc5xxx/serial.c363
-rw-r--r--cpu/mpc5xxx/speed.c94
-rw-r--r--cpu/mpc5xxx/start.S777
-rw-r--r--cpu/mpc5xxx/traps.c245
-rw-r--r--cpu/mpc5xxx/u-boot-customlayout.lds133
-rw-r--r--cpu/mpc5xxx/u-boot.lds122
-rw-r--r--cpu/mpc5xxx/usb.c58
-rw-r--r--cpu/mpc5xxx/usb_ohci.c1646
-rw-r--r--cpu/mpc5xxx/usb_ohci.h418
-rw-r--r--cpu/mpc8220/Makefile50
-rw-r--r--cpu/mpc8220/config.mk30
-rw-r--r--cpu/mpc8220/cpu.c104
-rw-r--r--cpu/mpc8220/cpu_init.c136
-rw-r--r--cpu/mpc8220/dma.h68
-rw-r--r--cpu/mpc8220/dramSetup.c752
-rw-r--r--cpu/mpc8220/dramSetup.h108
-rw-r--r--cpu/mpc8220/fec.c1000
-rw-r--r--cpu/mpc8220/fec.h283
-rw-r--r--cpu/mpc8220/fec_dma_tasks.S363
-rw-r--r--cpu/mpc8220/i2c.c390
-rw-r--r--cpu/mpc8220/i2cCore.c627
-rw-r--r--cpu/mpc8220/i2cCore.h103
-rw-r--r--cpu/mpc8220/interrupts.c80
-rw-r--r--cpu/mpc8220/io.S128
-rw-r--r--cpu/mpc8220/loadtask.c78
-rw-r--r--cpu/mpc8220/pci.c191
-rw-r--r--cpu/mpc8220/speed.c123
-rw-r--r--cpu/mpc8220/start.S750
-rw-r--r--cpu/mpc8220/traps.c236
-rw-r--r--cpu/mpc8220/u-boot.lds122
-rw-r--r--cpu/mpc8220/uart.c126
-rw-r--r--cpu/mpc824x/.gitignore1
-rw-r--r--cpu/mpc824x/Makefile56
-rw-r--r--cpu/mpc824x/config.mk29
-rw-r--r--cpu/mpc824x/cpu.c280
-rw-r--r--cpu/mpc824x/cpu_init.c417
-rw-r--r--cpu/mpc824x/drivers/epic.h1
-rw-r--r--cpu/mpc824x/drivers/epic/README102
-rw-r--r--cpu/mpc824x/drivers/epic/epic.h163
-rw-r--r--cpu/mpc824x/drivers/epic/epic1.c517
-rw-r--r--cpu/mpc824x/drivers/epic/epic2.S196
-rw-r--r--cpu/mpc824x/drivers/epic/epicutil.S57
-rw-r--r--cpu/mpc824x/drivers/errors.h212
-rw-r--r--cpu/mpc824x/drivers/i2c/i2c.c270
-rw-r--r--cpu/mpc824x/drivers/i2c_export.h103
-rw-r--r--cpu/mpc824x/interrupts.c93
-rw-r--r--cpu/mpc824x/pci.c78
-rw-r--r--cpu/mpc824x/speed.c118
-rw-r--r--cpu/mpc824x/start.S766
-rw-r--r--cpu/mpc824x/traps.c219
-rw-r--r--cpu/mpc824x/u-boot.lds122
-rw-r--r--cpu/mpc8260/Makefile53
-rw-r--r--cpu/mpc8260/bedbug_603e.c238
-rw-r--r--cpu/mpc8260/commproc.c221
-rw-r--r--cpu/mpc8260/config.mk30
-rw-r--r--cpu/mpc8260/cpu.c338
-rw-r--r--cpu/mpc8260/cpu_init.c292
-rw-r--r--cpu/mpc8260/ether_fcc.c1190
-rw-r--r--cpu/mpc8260/ether_scc.c387
-rw-r--r--cpu/mpc8260/i2c.c785
-rw-r--r--cpu/mpc8260/interrupts.c279
-rw-r--r--cpu/mpc8260/kgdb.S72
-rw-r--r--cpu/mpc8260/pci.c466
-rw-r--r--cpu/mpc8260/serial_scc.c498
-rw-r--r--cpu/mpc8260/serial_smc.c467
-rw-r--r--cpu/mpc8260/speed.c253
-rw-r--r--cpu/mpc8260/speed.h54
-rw-r--r--cpu/mpc8260/spi.c435
-rw-r--r--cpu/mpc8260/start.S1023
-rw-r--r--cpu/mpc8260/traps.c273
-rw-r--r--cpu/mpc8260/u-boot.lds122
-rw-r--r--cpu/mpc83xx/Makefile62
-rw-r--r--cpu/mpc83xx/config.mk29
-rw-r--r--cpu/mpc83xx/cpu.c334
-rw-r--r--cpu/mpc83xx/cpu_init.c548
-rw-r--r--cpu/mpc83xx/ecc.c390
-rw-r--r--cpu/mpc83xx/fdt.c143
-rw-r--r--cpu/mpc83xx/interrupts.c97
-rw-r--r--cpu/mpc83xx/nand_init.c112
-rw-r--r--cpu/mpc83xx/pci.c241
-rw-r--r--cpu/mpc83xx/pcie.c317
-rw-r--r--cpu/mpc83xx/qe_io.c82
-rw-r--r--cpu/mpc83xx/serdes.c145
-rw-r--r--cpu/mpc83xx/spd_sdram.c918
-rw-r--r--cpu/mpc83xx/speed.c549
-rw-r--r--cpu/mpc83xx/start.S1207
-rw-r--r--cpu/mpc83xx/traps.c266
-rw-r--r--cpu/mpc83xx/u-boot.lds121
-rw-r--r--cpu/mpc85xx/Makefile95
-rw-r--r--cpu/mpc85xx/commproc.c205
-rw-r--r--cpu/mpc85xx/config.mk35
-rw-r--r--cpu/mpc85xx/cpu.c330
-rw-r--r--cpu/mpc85xx/cpu_init.c405
-rw-r--r--cpu/mpc85xx/cpu_init_early.c112
-rw-r--r--cpu/mpc85xx/cpu_init_nand.c63
-rw-r--r--cpu/mpc85xx/ddr-gen1.c89
-rw-r--r--cpu/mpc85xx/ddr-gen2.c74
-rw-r--r--cpu/mpc85xx/ddr-gen3.c116
-rw-r--r--cpu/mpc85xx/ether_fcc.c469
-rw-r--r--cpu/mpc85xx/fdt.c417
-rw-r--r--cpu/mpc85xx/fixed_ivor.S79
-rw-r--r--cpu/mpc85xx/interrupts.c110
-rw-r--r--cpu/mpc85xx/mp.c355
-rw-r--r--cpu/mpc85xx/mp.h21
-rw-r--r--cpu/mpc85xx/mpc8536_serdes.c180
-rw-r--r--cpu/mpc85xx/pci.c230
-rw-r--r--cpu/mpc85xx/qe_io.c85
-rw-r--r--cpu/mpc85xx/release.S311
-rw-r--r--cpu/mpc85xx/resetvec.S2
-rw-r--r--cpu/mpc85xx/serial_scc.c268
-rw-r--r--cpu/mpc85xx/speed.c283
-rw-r--r--cpu/mpc85xx/start.S1195
-rw-r--r--cpu/mpc85xx/tlb.c277
-rw-r--r--cpu/mpc85xx/traps.c325
-rw-r--r--cpu/mpc85xx/u-boot-nand.lds137
-rw-r--r--cpu/mpc85xx/u-boot-nand_spl.lds67
-rw-r--r--cpu/mpc85xx/u-boot.lds157
-rw-r--r--cpu/mpc86xx/Makefile63
-rw-r--r--cpu/mpc86xx/cache.S378
-rw-r--r--cpu/mpc86xx/config.mk27
-rw-r--r--cpu/mpc86xx/cpu.c233
-rw-r--r--cpu/mpc86xx/cpu_init.c190
-rw-r--r--cpu/mpc86xx/ddr-8641.c85
-rw-r--r--cpu/mpc86xx/fdt.c60
-rw-r--r--cpu/mpc86xx/interrupts.c115
-rw-r--r--cpu/mpc86xx/mp.c125
-rw-r--r--cpu/mpc86xx/release.S167
-rw-r--r--cpu/mpc86xx/speed.c163
-rw-r--r--cpu/mpc86xx/start.S957
-rw-r--r--cpu/mpc86xx/traps.c233
-rw-r--r--cpu/mpc8xx/Makefile66
-rw-r--r--cpu/mpc8xx/bedbug_860.c316
-rw-r--r--cpu/mpc8xx/commproc.c131
-rw-r--r--cpu/mpc8xx/config.mk26
-rw-r--r--cpu/mpc8xx/cpu.c654
-rw-r--r--cpu/mpc8xx/cpu_init.c285
-rw-r--r--cpu/mpc8xx/fdt.c46
-rw-r--r--cpu/mpc8xx/fec.c1026
-rw-r--r--cpu/mpc8xx/fec.h28
-rw-r--r--cpu/mpc8xx/i2c.c707
-rw-r--r--cpu/mpc8xx/interrupts.c294
-rw-r--r--cpu/mpc8xx/kgdb.S74
-rw-r--r--cpu/mpc8xx/lcd.c621
-rw-r--r--cpu/mpc8xx/plprcr_write.S135
-rw-r--r--cpu/mpc8xx/scc.c572
-rw-r--r--cpu/mpc8xx/serial.c745
-rw-r--r--cpu/mpc8xx/speed.c416
-rw-r--r--cpu/mpc8xx/spi.c560
-rw-r--r--cpu/mpc8xx/start.S684
-rw-r--r--cpu/mpc8xx/traps.c241
-rw-r--r--cpu/mpc8xx/upatch.c194
-rw-r--r--cpu/mpc8xx/video.c1331
-rw-r--r--cpu/mpc8xx/wlkbd.c36
-rw-r--r--cpu/mpc8xxx/Makefile27
-rw-r--r--cpu/mpc8xxx/cpu.c144
-rw-r--r--cpu/mpc8xxx/ddr/Makefile35
-rw-r--r--cpu/mpc8xxx/ddr/common_timing_params.h53
-rw-r--r--cpu/mpc8xxx/ddr/ctrl_regs.c1366
-rw-r--r--cpu/mpc8xxx/ddr/ddr.h81
-rw-r--r--cpu/mpc8xxx/ddr/ddr1_dimm_params.c343
-rw-r--r--cpu/mpc8xxx/ddr/ddr2_dimm_params.c339
-rw-r--r--cpu/mpc8xxx/ddr/ddr3_dimm_params.c314
-rw-r--r--cpu/mpc8xxx/ddr/lc_common_dimm_params.c468
-rw-r--r--cpu/mpc8xxx/ddr/main.c479
-rw-r--r--cpu/mpc8xxx/ddr/options.c297
-rw-r--r--cpu/mpc8xxx/ddr/util.c206
-rw-r--r--cpu/mpc8xxx/fdt.c55
-rw-r--r--cpu/mpc8xxx/pci_cfg.c214
-rw-r--r--cpu/ppc4xx/40x_spd_sdram.c464
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c1248
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c3174
-rw-r--r--cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c1251
-rw-r--r--cpu/ppc4xx/4xx_pci.c873
-rw-r--r--cpu/ppc4xx/4xx_pcie.c1298
-rw-r--r--cpu/ppc4xx/4xx_uart.c878
-rw-r--r--cpu/ppc4xx/Makefile92
-rw-r--r--cpu/ppc4xx/bedbug_405.c308
-rw-r--r--cpu/ppc4xx/cache.S235
-rw-r--r--cpu/ppc4xx/cmd_chip_config.c148
-rw-r--r--cpu/ppc4xx/commproc.c77
-rw-r--r--cpu/ppc4xx/config.mk37
-rw-r--r--cpu/ppc4xx/cpu.c754
-rw-r--r--cpu/ppc4xx/cpu_init.c456
-rw-r--r--cpu/ppc4xx/dcr.S198
-rw-r--r--cpu/ppc4xx/denali_data_eye.c389
-rw-r--r--cpu/ppc4xx/denali_spd_ddr2.c1256
-rw-r--r--cpu/ppc4xx/ecc.c185
-rw-r--r--cpu/ppc4xx/ecc.h75
-rw-r--r--cpu/ppc4xx/fdt.c177
-rw-r--r--cpu/ppc4xx/gpio.c255
-rw-r--r--cpu/ppc4xx/interrupts.c216
-rw-r--r--cpu/ppc4xx/iop480_uart.c237
-rw-r--r--cpu/ppc4xx/kgdb.S78
-rw-r--r--cpu/ppc4xx/miiphy.c366
-rw-r--r--cpu/ppc4xx/reginfo.c370
-rw-r--r--cpu/ppc4xx/resetvec.S12
-rw-r--r--cpu/ppc4xx/sdram.c468
-rw-r--r--cpu/ppc4xx/sdram.h76
-rw-r--r--cpu/ppc4xx/speed.c1177
-rw-r--r--cpu/ppc4xx/start.S2170
-rw-r--r--cpu/ppc4xx/tlb.c352
-rw-r--r--cpu/ppc4xx/traps.c409
-rw-r--r--cpu/ppc4xx/u-boot.lds169
-rw-r--r--cpu/ppc4xx/uic.c180
-rw-r--r--cpu/ppc4xx/usb.c66
-rw-r--r--cpu/ppc4xx/usb_ohci.c1648
-rw-r--r--cpu/ppc4xx/usb_ohci.h410
-rw-r--r--cpu/ppc4xx/usbdev.c230
-rw-r--r--cpu/ppc4xx/usbdev.h31
-rw-r--r--cpu/ppc4xx/xilinx_irq.c100
261 files changed, 0 insertions, 82264 deletions
diff --git a/cpu/74xx_7xx/Makefile b/cpu/74xx_7xx/Makefile
deleted file mode 100644
index fe905f3..0000000
--- a/cpu/74xx_7xx/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = cache.o kgdb.o io.o
-COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/74xx_7xx/cache.S b/cpu/74xx_7xx/cache.S
deleted file mode 100644
index 66c7298..0000000
--- a/cpu/74xx_7xx/cache.S
+++ /dev/null
@@ -1,404 +0,0 @@
-#include <config.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CACHE_LINE_SIZE
-# define CACHE_LINE_SIZE L1_CACHE_BYTES
-#endif
-
-#if CACHE_LINE_SIZE == 128
-#define LG_CACHE_LINE_SIZE 7
-#elif CACHE_LINE_SIZE == 32
-#define LG_CACHE_LINE_SIZE 5
-#elif CACHE_LINE_SIZE == 16
-#define LG_CACHE_LINE_SIZE 4
-#elif CACHE_LINE_SIZE == 8
-#define LG_CACHE_LINE_SIZE 3
-#else
-# error "Invalid cache line size!"
-#endif
-
-/*
- * Invalidate L1 instruction cache.
- */
-_GLOBAL(invalidate_l1_instruction_cache)
- mfspr r3,PVR
- rlwinm r3,r3,16,16,31
- cmpi 0,r3,1
- beqlr /* for 601, do nothing */
- /* 603/604 processor - use invalidate-all bit in HID0 */
- mfspr r3,HID0
- ori r3,r3,HID0_ICFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Invalidate L1 data cache.
- */
-_GLOBAL(invalidate_l1_data_cache)
- mfspr r3,HID0
- ori r3,r3,HID0_DCFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Flush data cache.
- */
-_GLOBAL(flush_dcache)
- lis r3,0
- lis r5,CACHE_LINE_SIZE
-flush:
- cmp 0,1,r3,r5
- bge done
- lwz r5,0(r3)
- lis r5,CACHE_LINE_SIZE
- addi r3,r3,0x4
- b flush
-done:
- blr
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5 /* align r3 down to cache line */
- subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
- add r4,r4,r5 /* r4 += cache_line_size-1 */
- srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
- beqlr /* if r4 == 0 return */
- mtctr r4 /* ctr = r4 */
-
- sync
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbf 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbf's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_page_to_ram(void *page)
- */
-_GLOBAL(__flush_page_to_ram)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Flush a particular page from the instruction cache.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- * This is a no-op on the 601 which has a unified cache.
- *
- * void __flush_icache_page(void *page)
- */
-_GLOBAL(__flush_icache_page)
- mfspr r5,PVR
- rlwinm r5,r5,16,16,31
- cmpi 0,r5,1
- beqlr /* for 601, do nothing */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
-1: icbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Clear a page using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- */
-_GLOBAL(clear_page)
- li r0,4096/CACHE_LINE_SIZE
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- blr
-
-/*
- * Enable L1 Instruction cache
- */
-_GLOBAL(icache_enable)
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Disable L1 Instruction cache
- */
-_GLOBAL(icache_disable)
- mflr r4
- bl invalidate_l1_instruction_cache /* uses r3 */
- sync
- mtlr r4
- mfspr r3, HID0
- li r5, 0
- ori r5, r5, HID0_ICE
- andc r3, r3, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Is instruction cache enabled?
- */
-_GLOBAL(icache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_ICE
- blr
-
-
-_GLOBAL(l1dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
-/*
- * Enable data cache(s) - L1 and optionally L2
- * Calls l2cache_enable. LR saved in r5
- */
-_GLOBAL(dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- mflr r5
- bl l2cache_enable /* uses r3 and r4 */
- sync
- mtlr r5
-#endif
- blr
-
-
-/*
- * Disable data cache(s) - L1 and optionally L2
- * Calls flush_dcache and l2cache_disable_no_flush.
- * LR saved in r4
- */
-_GLOBAL(dcache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- li r5, HID0_DCE|HID0_DCFI
- andc r3, r3, r5 /* no enable, no invalidate */
- mtspr HID0, r3
- sync
-#ifdef CONFIG_SYS_L2
- bl l2cache_disable_no_flush /* uses r3 */
-#endif
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Is data cache enabled?
- */
-_GLOBAL(dcache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_DCE
- blr
-
-/*
- * Invalidate L2 cache using L2I and polling L2IP or L2I
- */
-_GLOBAL(l2cache_invalidate)
- sync
- mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- sync
- mtspr l2cr, r3
- sync
- mfspr r3, PVR
- sync
- rlwinm r3, r3, 16,16,31
- cmpli 0,r3,0x8000 /* 7451, 7441 */
- beq 0,inv_7450
- cmpli 0,r3,0x8001 /* 7455, 7445 */
- beq 0,inv_7450
- cmpli 0,r3,0x8002 /* 7457, 7447 */
- beq 0,inv_7450
- cmpli 0,r3,0x8003 /* 7447A */
- beq 0,inv_7450
- cmpli 0,r3,0x8004 /* 7448 */
- beq 0,inv_7450
-invl2:
- mfspr r3, l2cr
- andi. r3, r3, L2CR_L2IP
- bne invl2
- /* turn off the global invalidate bit */
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 11, 9
- sync
- mtspr l2cr, r3
- sync
- blr
-inv_7450:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne inv_7450
- blr
-
-/*
- * Enable L2 cache
- * Calls l2cache_invalidate. LR is saved in r4
- */
-_GLOBAL(l2cache_enable)
- mflr r4 /* save link register */
- bl l2cache_invalidate /* uses r3 */
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Disable L2 cache
- * Calls flush_dcache. LR is saved in r4
- */
-_GLOBAL(l2cache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mtlr r4 /* restore link register */
-l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- isync
- blr
diff --git a/cpu/74xx_7xx/config.mk b/cpu/74xx_7xx/config.mk
deleted file mode 100644
index df1f6ac..0000000
--- a/cpu/74xx_7xx/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2001
-# Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_74xx_7xx -ffixed-r2 -mstring
diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c
deleted file mode 100644
index 3c17277..0000000
--- a/cpu/74xx_7xx/cpu.c
+++ /dev/null
@@ -1,320 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- *
- * more modifications by
- * Josh Huber <huber@mclx.com>
- * added support for the 74xx series of cpus
- * added support for the 7xx series of cpus
- * made the code a little less hard-coded, and more auto-detectish
- */
-
-#include <common.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#include "../board/MAI/AmigaOneG3SE/memio.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-cpu_t
-get_cpu_type(void)
-{
- uint pvr = get_pvr();
- cpu_t type;
-
- type = CPU_UNKNOWN;
-
- switch (PVR_VER(pvr)) {
- case 0x000c:
- type = CPU_7400;
- break;
- case 0x0008:
- type = CPU_750;
-
- if (((pvr >> 8) & 0xff) == 0x01) {
- type = CPU_750CX; /* old CX (80100 and 8010x?)*/
- } else if (((pvr >> 8) & 0xff) == 0x22) {
- type = CPU_750CX; /* CX (82201,82202) and CXe (82214) */
- } else if (((pvr >> 8) & 0xff) == 0x33) {
- type = CPU_750CX; /* CXe (83311) */
- } else if (((pvr >> 12) & 0xF) == 0x3) {
- type = CPU_755;
- }
- break;
-
- case 0x7000:
- type = CPU_750FX;
- break;
-
- case 0x7002:
- type = CPU_750GX;
- break;
-
- case 0x800C:
- type = CPU_7410;
- break;
-
- case 0x8000:
- type = CPU_7450;
- break;
-
- case 0x8001:
- type = CPU_7455;
- break;
-
- case 0x8002:
- type = CPU_7457;
- break;
-
- case 0x8003:
- type = CPU_7447A;
- break;
-
- case 0x8004:
- type = CPU_7448;
- break;
-
- default:
- break;
- }
-
- return type;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if !defined(CONFIG_BAB7xx)
-int checkcpu (void)
-{
- uint type = get_cpu_type();
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
- char *str;
-
- puts ("CPU: ");
-
- switch (type) {
- case CPU_750CX:
- printf ("750CX%s v%d.%d", (pvr&0xf0)?"e":"",
- (pvr>>8) & 0xf,
- pvr & 0xf);
- goto PR_CLK;
-
- case CPU_750:
- str = "750";
- break;
-
- case CPU_750FX:
- str = "750FX";
- break;
-
- case CPU_750GX:
- str = "750GX";
- break;
-
- case CPU_755:
- str = "755";
- break;
-
- case CPU_7400:
- str = "MPC7400";
- break;
-
- case CPU_7410:
- str = "MPC7410";
- break;
-
- case CPU_7447A:
- str = "MPC7447A";
- break;
-
- case CPU_7448:
- str = "MPC7448";
- break;
-
- case CPU_7450:
- str = "MPC7450";
- break;
-
- case CPU_7455:
- str = "MPC7455";
- break;
-
- case CPU_7457:
- str = "MPC7457";
- break;
-
- default:
- printf("Unknown CPU -- PVR: 0x%08x\n", pvr);
- return -1;
- }
-
- printf ("%s v%d.%d", str, (pvr >> 8) & 0xFF, pvr & 0xFF);
-PR_CLK:
- printf (" @ %s MHz\n", strmhz(buf, clock));
-
- return (0);
-}
-#endif
-/* these two functions are unimplemented currently [josh] */
-
-/* -------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int
-checkicache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int
-checkdcache(void)
-{
- return 0; /* XXX */
-}
-
-/* -------------------------------------------------------------------- */
-
-static inline void
-soft_restart(unsigned long addr)
-{
- /* SRR0 has system reset vector, SRR1 has default MSR value */
- /* rfi restores MSR from SRR1 and sets the PC to the SRR0 value */
-
- __asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
- __asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
- __asm__ __volatile__ ("mtspr 27, 4");
- __asm__ __volatile__ ("rfi");
-
- while(1); /* not reached */
-}
-
-
-#if !defined(CONFIG_PCIPPC2) && \
- !defined(CONFIG_BAB7xx) && \
- !defined(CONFIG_ELPPC) && \
- !defined(CONFIG_PPMC7XX)
-/* no generic way to do board reset. simply call soft_reset. */
-void
-do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong addr;
- /* flush and disable I/D cache */
- __asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
- __asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
- __asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
- __asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 4");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("mtspr 1008, 5");
- __asm__ __volatile__ ("isync");
- __asm__ __volatile__ ("sync");
-
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on your
- * system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- soft_restart(addr);
- while(1); /* not reached */
-}
-#endif
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * For the 7400 the TB clock runs at 1/4 the cpu bus speed.
- */
-#if defined(CONFIG_AMIGAONEG3SE) || defined(CONFIG_SYS_CONFIG_BUS_CLK)
-unsigned long get_tbclk(void)
-{
- return (gd->bus_clk / 4);
-}
-#else /* ! CONFIG_AMIGAONEG3SE and !CONFIG_SYS_CONFIG_BUS_CLK*/
-
-unsigned long get_tbclk (void)
-{
- return CONFIG_SYS_BUS_HZ / 4;
-}
-#endif /* CONFIG_AMIGAONEG3SE or CONFIG_SYS_CONFIG_BUS_CLK*/
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_WATCHDOG)
-#if !defined(CONFIG_PCIPPC2) && !defined(CONFIG_BAB7xx)
-void
-watchdog_reset(void)
-{
-
-}
-#endif /* !CONFIG_PCIPPC2 && !CONFIG_BAB7xx */
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-
-#ifdef CONFIG_OF_LIBFDT
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- fdt_fixup_ethernet(blob);
-}
-#endif
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/74xx_7xx/cpu_init.c b/cpu/74xx_7xx/cpu_init.c
deleted file mode 100644
index 1dd1b2c..0000000
--- a/cpu/74xx_7xx/cpu_init.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu_init.c - low level cpu init
- *
- * there's really nothing going on here yet. future work area?
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-
-/*
- * Breath some life into the CPU...
- *
- * there's basically nothing to do here since the memory controller
- * isn't on the CPU in this case.
- */
-void
-cpu_init_f (void)
-{
- switch (get_cpu_type()) {
- case CPU_7450:
- case CPU_7455:
- case CPU_7457:
- case CPU_7447A:
- case CPU_7448:
- /* enable the timebase bit in HID0 */
- set_hid0(get_hid0() | 0x4000000);
- break;
- default:
- /* do nothing */
- break;
- }
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
- return (0);
-}
diff --git a/cpu/74xx_7xx/interrupts.c b/cpu/74xx_7xx/interrupts.c
deleted file mode 100644
index 0ea1aec..0000000
--- a/cpu/74xx_7xx/interrupts.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-#include <command.h>
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
-#if defined(DEBUG) && !defined(CONFIG_AMIGAONEG3SE)
- printf("interrupt_init: GT main cause reg: %08x:%08x\n",
- GTREGREAD(LOW_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(HIGH_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet cause regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_CAUSE_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_CAUSE_REGISTER));
- printf("interrupt_init: ethernet mask regs: %08x %08x %08x\n",
- GTREGREAD(ETHERNET0_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET1_INTERRUPT_MASK_REGISTER),
- GTREGREAD(ETHERNET2_INTERRUPT_MASK_REGISTER));
- puts("interrupt_init: setting decrementer_count\n");
-#endif
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void
-external_interrupt(struct pt_regs *regs)
-{
- puts("external_interrupt (oops!)\n");
-}
-
-volatile ulong timestamp = 0;
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void
-timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-
-}
-
-void
-irq_free_handler(int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
- puts("IRQ related functions are unimplemented currently.\n");
-}
diff --git a/cpu/74xx_7xx/io.S b/cpu/74xx_7xx/io.S
deleted file mode 100644
index af2e6d1..0000000
--- a/cpu/74xx_7xx/io.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
diff --git a/cpu/74xx_7xx/kgdb.S b/cpu/74xx_7xx/kgdb.S
deleted file mode 100644
index ad487cd..0000000
--- a/cpu/74xx_7xx/kgdb.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <74xx_7xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3,0
- addis r4,r0,0x0040
-kgdb_flush_loop:
- lwz r5,0(r3)
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- cmp 0,0,r3,r4
- bne kgdb_flush_loop
- SYNC
- mfspr r3,1008
- ori r3,r3,0x8800
- mtspr 1008,r3
- sync
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c
deleted file mode 100644
index f2fdcd5..0000000
--- a/cpu/74xx_7xx/speed.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <74xx_7xx.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_AMIGAONEG3SE
-#include "../board/MAI/AmigaOneG3SE/via686.h"
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern unsigned long get_board_bus_clk (void);
-
-static const int hid1_multipliers_x_10[] = {
- 25, /* 0000 - 2.5x */
- 75, /* 0001 - 7.5x */
- 70, /* 0010 - 7x */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 65, /* 0101 - 6.5x */
- 100, /* 0110 - 10x */
- 45, /* 0111 - 4.5x */
- 30, /* 1000 - 3x */
- 55, /* 1001 - 5.5x */
- 40, /* 1010 - 4x */
- 50, /* 1011 - 5x */
- 80, /* 1100 - 8x */
- 60, /* 1101 - 6x */
- 35, /* 1110 - 3.5x */
- 0 /* 1111 - off */
-};
-
-/* PLL_CFG[0:4] table for cpu 7448/7447A/7455/7457 */
-static const int hid1_74xx_multipliers_x_10[] = {
- 115, /* 00000 - 11.5x */
- 170, /* 00001 - 17x */
- 75, /* 00010 - 7.5x */
- 150, /* 00011 - 15x */
- 70, /* 00100 - 7x */
- 180, /* 00101 - 18x */
- 10, /* 00110 - bypass */
- 200, /* 00111 - 20x */
- 20, /* 01000 - 2x */
- 210, /* 01001 - 21x */
- 65, /* 01010 - 6.5x */
- 130, /* 01011 - 13x */
- 85, /* 01100 - 8.5x */
- 240, /* 01101 - 24x */
- 95, /* 01110 - 9.5x */
- 90, /* 01111 - 9x */
- 30, /* 10000 - 3x */
- 105, /* 10001 - 10.5x */
- 55, /* 10010 - 5.5x */
- 110, /* 10011 - 11x */
- 40, /* 10100 - 4x */
- 100, /* 10101 - 10x */
- 50, /* 10110 - 5x */
- 120, /* 10111 - 12x */
- 80, /* 11000 - 8x */
- 140, /* 11001 - 14x */
- 60, /* 11010 - 6x */
- 160, /* 11011 - 16x */
- 135, /* 11100 - 13.5x */
- 280, /* 11101 - 28x */
- 0, /* 11110 - off */
- 125 /* 11111 - 12.5x */
-};
-
-static const int hid1_fx_multipliers_x_10[] = {
- 00, /* 0000 - off */
- 00, /* 0001 - off */
- 10, /* 0010 - bypass */
- 10, /* 0011 - bypass */
- 20, /* 0100 - 2x */
- 25, /* 0101 - 2.5x */
- 30, /* 0110 - 3x */
- 35, /* 0111 - 3.5x */
- 40, /* 1000 - 4x */
- 45, /* 1001 - 4.5x */
- 50, /* 1010 - 5x */
- 55, /* 1011 - 5.5x */
- 60, /* 1100 - 6x */
- 65, /* 1101 - 6.5x */
- 70, /* 1110 - 7x */
- 75, /* 1111 - 7.5 */
- 80, /* 10000 - 8x */
- 85, /* 10001 - 8.5x */
- 90, /* 10010 - 9x */
- 95, /* 10011 - 9.5x */
- 100, /* 10100 - 10x */
- 110, /* 10101 - 11x */
- 120, /* 10110 - 12x */
-};
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2)
- *
- * (Approx. GCLK frequency in Hz)
- */
-
-int get_clocks (void)
-{
- ulong clock = 0;
-
-#ifdef CONFIG_SYS_BUS_CLK
- gd->bus_clk = CONFIG_SYS_BUS_CLK; /* bus clock is a fixed frequency */
-#else
- gd->bus_clk = get_board_bus_clk (); /* bus clock is configurable */
-#endif
-
- /* calculate the clock frequency based upon the CPU type */
- switch (get_cpu_type()) {
- case CPU_7447A:
- case CPU_7448:
- case CPU_7455:
- case CPU_7457:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_74xx_multipliers_x_10[(get_hid1 () >> 12) & 0x1F];
- break;
-
- case CPU_750GX:
- case CPU_750FX:
- clock = (gd->bus_clk / 10) *
- hid1_fx_multipliers_x_10[get_hid1 () >> 27];
- break;
-
- case CPU_7450:
- case CPU_740:
- case CPU_740P:
- case CPU_745:
- case CPU_750CX:
- case CPU_750:
- case CPU_750P:
- case CPU_755:
- case CPU_7400:
- case CPU_7410:
- /*
- * Make sure division is done before multiplication to prevent 32-bit
- * arithmetic overflows which will cause a negative number
- */
- clock = (gd->bus_clk / 10) *
- hid1_multipliers_x_10[get_hid1 () >> 28];
- break;
-
- case CPU_UNKNOWN:
- printf ("get_gclk_freq(): unknown CPU type\n");
- clock = 0;
- return (1);
- }
-
- gd->cpu_clk = clock;
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S
deleted file mode 100644
index 88fdf88..0000000
--- a/cpu/74xx_7xx/start.S
+++ /dev/null
@@ -1,874 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2001 Josh Huber <huber@mclx.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfff00100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- */
-#include <config.h>
-#include <74xx_7xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if !defined(CONFIG_DB64360) && \
- !defined(CONFIG_DB64460) && \
- !defined(CONFIG_CPCI750) && \
- !defined(CONFIG_P3Mx)
-#include <galileo/gt64260R.h>
-#endif
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
-
- /* the boot code is located below the exception table */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /*
- * On the MPC8xx, this is a software emulation interrupt. It
- * occurs for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x2000
-
-boot_cold:
-boot_warm:
- /* disable everything */
- li r0, 0
- mtspr HID0, r0
- sync
- mtmsr 0
- bl invalidate_bats
- sync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#endif
-#if defined(CONFIG_ALTIVEC) && defined(CONFIG_74xx)
- .long 0x7e00066c
- /*
- * dssall instruction, gas doesn't have it yet
- * ...for altivec, data stream stop all this probably
- * isn't needed unless we warm (software) reboot U-Boot
- */
-#endif
-
-#ifdef CONFIG_SYS_L2
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-#ifdef CONFIG_SYS_BOARD_ASM_INIT
- /* do early init */
- bl board_asm_init
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*------------------------------------------------------*/
-
- /* perform low-level init */
- /* sdram init, galileo init, etc */
- /* r3: NHR bit from HID0 */
-
- /* setup the bats */
- bl setup_bats
- sync
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * This means:
- * 1) for the EVB, original gt regs need to be mapped
- * 2) need to have an IBAT for the 0xf region,
- * we are running there!
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- * The init-mem BAT can be reused after reloc. The old
- * gt-regs BAT can be reused after board_init_f calls
- * board_early_init_f (EVB only).
- */
-#if !defined(CONFIG_BAB7xx) && !defined(CONFIG_ELPPC) && !defined(CONFIG_P3Mx)
- /* enable address translation */
- bl enable_addr_trans
- sync
-
- /* enable and invalidate the data cache */
- bl l1dcache_enable
- sync
-#endif
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- /* run low-level CPU init code (from Flash) */
- bl cpu_init_f
- sync
-
- mr r3, r21
-
- /* r3: BOOTFLAG */
- /* run 1st part of board init code (from Flash) */
- bl board_init_f
- sync
-
- /* NOTREACHED */
-
- .globl invalidate_bats
-invalidate_bats:
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-#endif
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
-#ifdef CONFIG_HIGH_BATS
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-#endif
- isync
- sync
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- addis r3, r0, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- /* DBAT 0 */
- addis r4, r0, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- addis r3, r0, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- /* IBAT 1 */
- addis r4, r0, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- addis r3, r0, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- /* DBAT 1 */
- addis r4, r0, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- addis r3, r0, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- /* IBAT 2 */
- addis r4, r0, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- addis r3, r0, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- /* DBAT 2 */
- addis r4, r0, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- addis r3, r0, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- /* IBAT 3 */
- addis r4, r0, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- addis r3, r0, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- addis r4, r0, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- addis r3, r0, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CONFIG_SYS_IBAT4L@h
- ori r4, r4, CONFIG_SYS_IBAT4L@l
- addis r3, r0, CONFIG_SYS_IBAT4U@h
- ori r3, r3, CONFIG_SYS_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
- isync
-
- /* DBAT 4 */
- addis r4, r0, CONFIG_SYS_DBAT4L@h
- ori r4, r4, CONFIG_SYS_DBAT4L@l
- addis r3, r0, CONFIG_SYS_DBAT4U@h
- ori r3, r3, CONFIG_SYS_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
- isync
-
- /* IBAT 5 */
- addis r4, r0, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- addis r3, r0, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- addis r4, r0, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- addis r3, r0, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- addis r4, r0, CONFIG_SYS_IBAT6L@h
- ori r4, r4, CONFIG_SYS_IBAT6L@l
- addis r3, r0, CONFIG_SYS_IBAT6U@h
- ori r3, r3, CONFIG_SYS_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- addis r4, r0, CONFIG_SYS_DBAT6L@h
- ori r4, r4, CONFIG_SYS_DBAT6L@l
- addis r3, r0, CONFIG_SYS_DBAT6U@h
- ori r3, r3, CONFIG_SYS_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
- /* IBAT 7 */
- addis r4, r0, CONFIG_SYS_IBAT7L@h
- ori r4, r4, CONFIG_SYS_IBAT7L@l
- addis r3, r0, CONFIG_SYS_IBAT7U@h
- ori r3, r3, CONFIG_SYS_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- addis r4, r0, CONFIG_SYS_DBAT7L@h
- ori r4, r4, CONFIG_SYS_DBAT7L@l
- addis r3, r0, CONFIG_SYS_DBAT7U@h
- ori r3, r3, CONFIG_SYS_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
-
- /* bats are done, now invalidate the TLBs */
-
- addis r3, 0, 0x0000
- addis r5, 0, 0x4 /* upper bound of 0x00040000 for 7400/750 */
-
- isync
-
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt tlblp
-
- blr
-
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
- .globl dc_read
-dc_read:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*-----------------------------------------------------------------------*/
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-#ifdef CONFIG_ECC
- bl board_relocate_rom
- sync
- mr r3, r10 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-#else
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-#endif
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-#ifdef CONFIG_ECC
- bl board_init_ecc
-#endif
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-/* clear_bss: */
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r10 /* Destination Address */
-#if defined(CONFIG_AMIGAONEG3SE) || \
- defined(CONFIG_DB64360) || \
- defined(CONFIG_DB64460) || \
- defined(CONFIG_CPCI750) || \
- defined(CONFIG_PPMC7XX) || \
- defined(CONFIG_P3Mx)
- mr r4, r9 /* Use RAM copy of the global data */
-#endif
- bl after_reloc
-
- /* not reached - end relocate_code */
-/*-----------------------------------------------------------------------*/
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- /* enable execptions from RAM vectors */
- mfmsr r7
- li r8,MSR_IP
- andc r7,r7,r8
- mtmsr r7
-
- mtlr r4 /* restore link register */
- blr
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, 0x1000
- sync
- mtspr HID0, r0
- sync
- blr
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-
- /* Unlock the data cache and invalidate it */
- mfspr r0, HID0
- li r3,0x1000
- andc r0,r0,r3
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c
deleted file mode 100644
index 1d5dd01..0000000
--- a/cpu/74xx_7xx/traps.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#ifdef CONFIG_AMIGAONEG3SE
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#ifdef CONFIG_AMIGAONEG3SE
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-#else
-#define END_OF_MEM 0x02000000
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void
-show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
- " %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP:"
- " %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
- int i, j;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
-
- p = (unsigned char *) ((unsigned long)p & 0xFFFFFFE0);
- p -= 32;
- for (i = 0; i < 256; i+=16) {
- printf("%08x: ", (unsigned int)p+i);
- for (j = 0; j < 16; j++) {
- printf("%02x ", p[i+j]);
- }
- printf("\n");
- }
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc512x/Makefile b/cpu/mpc512x/Makefile
deleted file mode 100644
index 427db7a..0000000
--- a/cpu/mpc512x/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# (C) Copyright 2007-2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-$(shell mkdir -p $(OBJTREE)/board/freescale/common)
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS-y := cpu.o
-COBJS-y += traps.o
-COBJS-y += cpu_init.o
-COBJS-y += fixed_sdram.o
-COBJS-y += i2c.o
-COBJS-y += interrupts.o
-COBJS-y += iopin.o
-COBJS-y += serial.o
-COBJS-y += speed.o
-COBJS-${CONFIG_FSL_DIU_FB} += diu.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_diu_fb.o
-COBJS-${CONFIG_FSL_DIU_FB} += ../../board/freescale/common/fsl_logo_bmp.o
-COBJS-${CONFIG_CMD_IDE} += ide.o
-COBJS-${CONFIG_IIM} += iim.o
-COBJS-$(CONFIG_PCI) += pci.o
-
-COBJS := $(COBJS-y)
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc512x/asm-offsets.h b/cpu/mpc512x/asm-offsets.h
deleted file mode 100644
index 4b14778..0000000
--- a/cpu/mpc512x/asm-offsets.h
+++ /dev/null
@@ -1,15 +0,0 @@
-/*
- * needed for cpu/mpc512x/start.S
- *
- * These should be auto-generated
- */
-#define LPCS0AW 0x0024
-#define SRAMBAR 0x00C4
-#define SWCRR 0x0904
-#define LPC_OFFSET 0x10000
-#define CS0_CONFIG 0x00000
-#define CS_CTRL 0x00020
-#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */
-
-#define EXC_OFF_SYS_RESET 0x0100
-#define _START_OFFSET EXC_OFF_SYS_RESET
diff --git a/cpu/mpc512x/config.mk b/cpu/mpc512x/config.mk
deleted file mode 100644
index fb0a563..0000000
--- a/cpu/mpc512x/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2007-2009 DENX Software Engineering
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC512X -DCONFIG_E300 \
- -ffixed-r2 -msoft-float -mcpu=603e
-
-# Use default linker script.
-# A board port can override this setting in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc512x/u-boot.lds
diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c
deleted file mode 100644
index 09cbd20..0000000
--- a/cpu/mpc512x/cpu.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2007-2010 DENX Software Engineering
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC512x family.
- *
- * Derived from the MPC83xx code.
- */
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- ulong clock = gd->cpu_clk;
- u32 pvr = get_pvr ();
- u32 spridr = in_be32(&immr->sysconf.spridr);
- char buf1[32], buf2[32];
-
- puts ("CPU: ");
-
- switch (spridr & 0xffff0000) {
- case SPR_5121E:
- puts ("MPC5121e ");
- break;
- default:
- printf ("Unknown part ID %08x ", spridr & 0xffff0000);
- }
- printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr));
-
- switch (pvr & 0xffff0000) {
- case PVR_E300C4:
- puts ("e300c4 ");
- break;
- default:
- puts ("unknown ");
- }
- printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n",
- strmhz(buf1, clock),
- strmhz(buf2, gd->csb_clk),
- gd->reset_status & 0xffff);
- return 0;
-}
-
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~( MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Enable Reset Control Reg - "RSTE" is the magic word that let us go
- */
- out_be32(&immap->reset.rpr, 0x52535445);
-
- /* Verify Reset Control Reg is enabled */
- while (!(in_be32(&immap->reset.rcer) & RCER_CRE))
- ;
-
- printf ("Resetting the board.\n");
- udelay(200);
-
- /* Perform reset */
- out_be32(&immap->reset.rcr, RCR_SWHR);
-
- /* Unreached... */
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return tbclk;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- /* Reset watchdog */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- out_be32(&immr->wdt.swsrr, 0x556c);
- out_be32(&immr->wdt.swsrr, 0xaa39);
-
- if (re_enable)
- enable_interrupts ();
-}
-#endif
-
-#ifdef CONFIG_OF_LIBFDT
-
-#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
-/*
- * fdt setup for old device trees
- * fix up
- * cpu clocks
- * soc clocks
- * ethernet addresses
- */
-static void old_ft_cpu_setup(void *blob, bd_t *bd)
-{
- /*
- * avoid fixing up by path because that
- * produces scary error messages
- */
- uchar enetaddr[6];
-
- /*
- * old device trees have ethernet nodes with
- * device_type = "network"
- */
- eth_getenv_enetaddr("ethaddr", enetaddr);
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "local-mac-address", enetaddr, 6, 0);
- do_fixup_by_prop(blob, "device_type", "network", 8,
- "address", enetaddr, 6, 0);
- /*
- * old device trees have soc nodes with
- * device_type = "soc"
- */
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_ipsfreq, 0);
-}
-#endif
-
-static void ft_clock_setup(void *blob, bd_t *bd)
-{
- char *cpu_path = "/cpus/" OF_CPU;
-
- /*
- * fixup cpu clocks using path
- */
- do_fixup_by_path_u32(blob, cpu_path,
- "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path,
- "clock-frequency", bd->bi_intfreq, 1);
- /*
- * fixup soc clocks using compatible
- */
- do_fixup_by_compat_u32(blob, OF_SOC_COMPAT,
- "bus-frequency", bd->bi_ipsfreq, 1);
-}
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES
- old_ft_cpu_setup(blob, bd);
-#endif
- ft_clock_setup(blob, bd);
-#ifdef CONFIG_HAS_ETH0
- fdt_fixup_ethernet(blob);
-#endif
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif
-
-#ifdef CONFIG_MPC512x_FEC
-/* Default initializations for FEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(bd_t *bis)
- */
-
-int cpu_eth_init(bd_t *bis)
-{
- return mpc512x_fec_initialize(bis);
-}
-#endif
diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c
deleted file mode 100644
index fe6beaf..0000000
--- a/cpu/mpc512x/cpu_init.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * Copyright (C) 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- *
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Set up the memory map, initialize registers,
- */
-void cpu_init_f (volatile immap_t * im)
-{
- u32 ips_div;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- out_be32(&im->arbiter.acr,
- (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT)
- );
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- out_be32(im->arbiter.acr,
- (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT)
- );
-#endif
-
- /* RSR - Reset Status Register - clear all status */
- gd->reset_status = im->reset.rsr;
- out_be32(&im->reset.rsr, ~RSR_RES);
-
- /*
- * RMR - Reset Mode Register - enable checkstop reset
- */
- out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT));
-
- /* Set IPS-CSB divider: IPS = 1/2 CSB */
- ips_div = in_be32(&im->clk.scfr[0]);
- ips_div &= ~(SCFR1_IPS_DIV_MASK);
- ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT;
- out_be32(&im->clk.scfr[0], ips_div);
-
- /*
- * Enable Time Base/Decrementer
- *
- * NOTICE: TB needs to be enabled as early as possible in order to
- * have udelay() working; if not enabled, usually leads to a hang, like
- * during FLASH chip identification etc.
- */
- setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
-}
-
-int cpu_init_r (void)
-{
- return 0;
-}
diff --git a/cpu/mpc512x/diu.c b/cpu/mpc512x/diu.c
deleted file mode 100644
index c2453c6..0000000
--- a/cpu/mpc512x/diu.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- * York Sun <yorksun@freescale.com>
- *
- * FSL DIU Framebuffer driver
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#include "../../board/freescale/common/fsl_diu_fb.h"
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-#include <stdio_dev.h>
-#include <video_fb.h>
-#endif
-
-#ifdef CONFIG_FSL_DIU_LOGO_BMP
-extern unsigned int FSL_Logo_BMP[];
-#else
-#define FSL_Logo_BMP NULL
-#endif
-
-static int xres, yres;
-
-void diu_set_pixel_clock(unsigned int pixclock)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile clk512x_t *clk = &immap->clk;
- volatile unsigned int *clkdvdr = &clk->scfr[0];
- unsigned long speed_ccb, temp, pixval;
-
- speed_ccb = get_bus_freq(0) * 4;
- temp = 1000000000/pixclock;
- temp *= 1000;
- pixval = speed_ccb / temp;
- debug("DIU pixval = %lu\n", pixval);
-
- /* Modify PXCLK in GUTS CLKDVDR */
- debug("DIU: Current value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
- temp = in_be32(clkdvdr) & 0xFFFFFF00;
- out_be32(clkdvdr, temp | (pixval & 0xFF));
- debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr));
-}
-
-char *valid_bmp(char *addr)
-{
- unsigned long h_addr;
-
- h_addr = simple_strtoul(addr, NULL, 16);
- if (h_addr < CONFIG_SYS_FLASH_BASE ||
- h_addr >= (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - 1)) {
- printf("bmp addr %lx is not a valid flash address\n", h_addr);
- return 0;
- } else if ((*(char *)(h_addr) != 'B') || (*(char *)(h_addr+1) != 'M')) {
- printf("bmp addr is not a bmp\n");
- return 0;
- } else
- return (char *)h_addr;
-}
-
-int mpc5121_diu_init(void)
-{
- unsigned int pixel_format;
- char *bmp = NULL;
- char *bmp_env;
-
- xres = 1024;
- yres = 768;
- pixel_format = 0x88883316;
-
- debug("mpc5121_diu_init\n");
- bmp_env = getenv("diu_bmp_addr");
- if (bmp_env) {
- bmp = valid_bmp(bmp_env);
- }
- if (!bmp)
- bmp = (char *)FSL_Logo_BMP;
- return fsl_diu_init(xres, pixel_format, 0, (unsigned char *)bmp);
-}
-
-int mpc5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
- int flag, int argc, char *argv[])
-{
- unsigned int addr;
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if (!strncmp(argv[1], "init", 4)) {
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
- fsl_diu_clear_screen();
- drv_video_init();
-#else
- return mpc5121_diu_init();
-#endif
- } else {
- addr = simple_strtoul(argv[1], NULL, 16);
- fsl_diu_clear_screen();
- fsl_diu_display_bmp((unsigned char *)addr, 0, 0, 0);
- }
-
- return 0;
-}
-
-U_BOOT_CMD(
- diufb, CONFIG_SYS_MAXARGS, 1, mpc5121diu_init_show_bmp,
- "Init or Display BMP file",
- "init\n - initialize DIU\n"
- "addr\n - display bmp at address 'addr'"
- );
-
-
-#if defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE)
-
-/*
- * The Graphic Device
- */
-GraphicDevice ctfb;
-void *video_hw_init(void)
-{
- GraphicDevice *pGD = (GraphicDevice *) &ctfb;
- struct fb_info *info;
-
- if (mpc5121_diu_init() < 0)
- return NULL;
-
- /* fill in Graphic device struct */
- sprintf(pGD->modeIdent, "%dx%dx%d %dkHz %dHz",
- xres, yres, 32, 64, 60);
-
- pGD->frameAdrs = (unsigned int)fsl_fb_open(&info);
- pGD->winSizeX = xres;
- pGD->winSizeY = yres - info->logo_height;
- pGD->plnSizeX = pGD->winSizeX;
- pGD->plnSizeY = pGD->winSizeY;
-
- pGD->gdfBytesPP = 4;
- pGD->gdfIndex = GDF_32BIT_X888RGB;
-
- pGD->isaBase = 0;
- pGD->pciBase = 0;
- pGD->memSize = info->screen_size - info->logo_size;
-
- /* Cursor Start Address */
- pGD->dprBase = 0;
- pGD->vprBase = 0;
- pGD->cprBase = 0;
-
- return (void *)pGD;
-}
-
-/**
- * Set the LUT
- *
- * @index: color number
- * @r: red
- * @b: blue
- * @g: green
- */
-void video_set_lut
- (unsigned int index, unsigned char r, unsigned char g, unsigned char b)
-{
- return;
-}
-
-#endif /* defined(CONFIG_VIDEO) || defined(CONFIG_CFB_CONSOLE) */
diff --git a/cpu/mpc512x/fixed_sdram.c b/cpu/mpc512x/fixed_sdram.c
deleted file mode 100644
index 442b5fc..0000000
--- a/cpu/mpc512x/fixed_sdram.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/mpc512x.h>
-
-/*
- * MDDRC Config Runtime Settings
- */
-ddr512x_config_t default_mddrc_config = {
- .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG,
- .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0,
- .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1,
- .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2,
-};
-
-u32 default_init_seq[] = {
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_EM2,
- CONFIG_SYS_DDRCMD_NOP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_EM2,
- CONFIG_SYS_DDRCMD_EM3,
- CONFIG_SYS_DDRCMD_EN_DLL,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_RFSH,
- CONFIG_SYS_MICRON_INIT_DEV_OP,
- CONFIG_SYS_DDRCMD_OCD_DEFAULT,
- CONFIG_SYS_DDRCMD_PCHG_ALL,
- CONFIG_SYS_DDRCMD_NOP
-};
-
-/*
- * fixed sdram init:
- * The board doesn't use memory modules that have serial presence
- * detect or similar mechanism for discovery of the DRAM settings
- */
-long int fixed_sdram(ddr512x_config_t *mddrc_config,
- u32 *dram_init_seq, int seq_sz)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
- u32 msize_log2 = __ilog2(msize);
- u32 i;
-
- /* take default settings and init sequence if necessary */
- if (mddrc_config == NULL)
- mddrc_config = &default_mddrc_config;
- if (dram_init_seq == NULL) {
- dram_init_seq = default_init_seq;
- seq_sz = sizeof(default_init_seq)/sizeof(u32);
- }
-
- /* Initialize IO Control */
- out_be32(&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR);
-
- /* Initialize DDR Local Window */
- out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000);
- out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1);
- sync_law(&im->sysconf.ddrlaw.ar);
-
- /* DDR Enable */
- out_be32(&im->mddrc.ddr_sys_config, MDDRC_SYS_CFG_EN);
-
- /* Initialize DDR Priority Manager */
- out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1);
- out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2);
- out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG);
- out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU);
- out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML);
- out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU);
- out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML);
- out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU);
- out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML);
- out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU);
- out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML);
- out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU);
- out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML);
- out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU);
- out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL);
- out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU);
- out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL);
- out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU);
- out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL);
- out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU);
- out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL);
- out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU);
- out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL);
-
- /*
- * Initialize MDDRC
- * put MDDRC in CMD mode and
- * set the max time between refreshes to 0 during init process
- */
- out_be32(&im->mddrc.ddr_sys_config,
- mddrc_config->ddr_sys_config | MDDRC_SYS_CFG_CMD_MASK);
- out_be32(&im->mddrc.ddr_time_config0,
- mddrc_config->ddr_time_config0 & MDDRC_REFRESH_ZERO_MASK);
- out_be32(&im->mddrc.ddr_time_config1,
- mddrc_config->ddr_time_config1);
- out_be32(&im->mddrc.ddr_time_config2,
- mddrc_config->ddr_time_config2);
-
- /* Initialize DDR with either default or supplied init sequence */
- for (i = 0; i < seq_sz; i++)
- out_be32(&im->mddrc.ddr_command, dram_init_seq[i]);
-
- /* Start MDDRC */
- out_be32(&im->mddrc.ddr_time_config0, mddrc_config->ddr_time_config0);
- out_be32(&im->mddrc.ddr_sys_config, mddrc_config->ddr_sys_config);
-
- return msize;
-}
diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c
deleted file mode 100644
index e2d9097..0000000
--- a/cpu/mpc512x/i2c.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * (C) Copyright 2003 - 2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC5xxx code.
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <i2c.h>
-
-/* by default set I2C bus 0 active */
-static unsigned int bus_num __attribute__ ((section (".data"))) = 0;
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 3
-
-struct mpc512x_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in(volatile u32 *reg);
-static void mpc_reg_out(volatile u32 *reg, int val, int mask);
-static int wait_for_bb(void);
-static int wait_for_pin(int *status);
-static int do_address(uchar chip, char rdwr_flag);
-static int send_bytes(uchar chip, char *buf, int len);
-static int receive_bytes(uchar chip, char *buf, int len);
-static int mpc_get_fdr(int);
-
-static int mpc_reg_in (volatile u32 *reg)
-{
- int ret = in_be32(reg) >> 24;
-
- return ret;
-}
-
-static void mpc_reg_out (volatile u32 *reg, int val, int mask)
-{
- if (!mask) {
- out_be32(reg, val << 24);
- } else {
- clrsetbits_be32(reg, mask << 24, (val & mask) << 24);
- }
-}
-
-static int wait_for_bb (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in (&regs->msr);
-
- while (timeout-- && (status & I2C_BB)) {
- volatile int temp;
- mpc_reg_out (&regs->mcr, I2C_STA, I2C_STA);
- temp = mpc_reg_in (&regs->mdr);
- mpc_reg_out (&regs->mcr, 0, I2C_STA);
- mpc_reg_out (&regs->mcr, 0, 0);
- mpc_reg_out (&regs->mcr, I2C_EN, 0);
-
- udelay (1000);
- status = mpc_reg_in (&regs->msr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in (&regs->msr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay (1000);
- *status = mpc_reg_in (&regs->msr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out (&regs->msr, 0, I2C_IF);
-
- return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag) {
- chip |= 1;
- }
-
- mpc_reg_out (&regs->mcr, I2C_TX, I2C_TX);
- mpc_reg_out (&regs->mdr, chip, 0);
-
- if (wait_for_pin (&status)) {
- return -2;
- }
-
- if (status & I2C_RXAK) {
- return -3;
- }
-
- return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out (&regs->mdr, buf[wrcount], 0);
-
- if (wait_for_pin (&status)) {
- break;
- }
-
- if (status & I2C_RXAK) {
- break;
- }
-
- }
-
- return !(wrcount == len);
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out (&regs->mcr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in (&regs->mdr);
-
- if (dummy) {
- dummy = 0;
- } else {
- rdcount++;
- }
-
- if (wait_for_pin (&status)) {
- return -4;
- }
- }
-
- mpc_reg_out (&regs->mcr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in (&regs->mdr);
-
- if (wait_for_pin (&status)) {
- return -5;
- }
-
- mpc_reg_out (&regs->mcr, 0, I2C_TXAK);
-
- return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- int i;
-
- for (i = 0; i < I2C_BUS_CNT; i++){
- volatile i2c512x_dev_t *regs = &im->i2c.dev[i];
-
- mpc_reg_out (&regs->mcr, 0, 0);
-
- /* Set clock */
- mpc_reg_out (&regs->mfdr, mpc_get_fdr (speed), 0);
- mpc_reg_out (&regs->madr, saddr << 1, 0);
-
- /* Enable module */
- mpc_reg_out (&regs->mcr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out (&regs->msr, 0, I2C_IF);
- }
-
- /* Disable interrupts */
- out_be32(&im->i2c.icr, 0);
-
- /* Turn off filters */
- out_be32(&im->i2c.mifr, 0);
-}
-
-static int mpc_get_fdr (int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ips, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
- struct mpc512x_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ips = gd->ips_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] - 1) * scltap[j].tap2tap
- + 2);
- if (ips <= speed*scl) {
- if ((speed*scl - ips) < bestmatch) {
- bestmatch = speed*scl - ips;
- best_i = i;
- best_j = j;
- best_speed = ips/scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- debug("%ld kHz, \n", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out (&regs->mcr, I2C_STA, I2C_STA);
-
- if (! do_address (chip, 0)) {
- mpc_reg_out (&regs->mcr, 0, I2C_STA);
- udelay (500);
- break;
- }
-
- mpc_reg_out (&regs->mcr, 0, I2C_STA);
- udelay (500);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- char xaddr[4];
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->mcr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, &xaddr[4-alen], alen)) {
- printf ("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->mcr, I2C_RSTA, I2C_RSTA);
- if (do_address (chip, 1)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes (chip, (char *)buf, len)) {
- printf ("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out (&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num];
- char xaddr[4];
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->mcr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, &xaddr[4-alen], alen)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)buf, len)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out (&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_set_bus_num (unsigned int bus)
-{
- if (bus >= I2C_BUS_CNT) {
- return -1;
- }
- bus_num = bus;
-
- return 0;
-}
-
-unsigned int i2c_get_bus_num (void)
-{
- return bus_num;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc512x/ide.c b/cpu/mpc512x/ide.c
deleted file mode 100644
index dd6b2f4..0000000
--- a/cpu/mpc512x/ide.c
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * (C) Copyright 2007-2009 DENX Software Engineering
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_IDE_RESET)
-
-void ide_set_reset (int idereset)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- debug ("ide_set_reset(%d)\n", idereset);
-
- if (idereset) {
- out_be32(&im->pata.pata_ata_control, 0);
- } else {
- out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B);
- }
- udelay(100);
-}
-
-void init_ide_reset (void)
-{
- debug ("init_ide_reset\n");
-
- /*
- * Clear the reset bit to reset the interface
- * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus
- */
- ide_set_reset(1);
-
- /* Assert the reset bit to enable the interface */
- ide_set_reset(0);
-
-}
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-int ide_preinit (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- long t;
- const struct {
- short t0;
- short t1;
- short t2_8;
- short t2_16;
- short t2i;
- short t4;
- short t9;
- short tA;
- } pio_specs = {
- .t0 = 600,
- .t1 = 70,
- .t2_8 = 290,
- .t2_16 = 165,
- .t2i = 0,
- .t4 = 30,
- .t9 = 20,
- .tA = 50,
- };
- union {
- u32 config;
- struct {
- u8 field1;
- u8 field2;
- u8 field3;
- u8 field4;
- }bytes;
- } cfg;
-
- debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n",
- (u32)&im->pata);
-
- /* Set the reset bit to 1 to enable the interface */
- ide_set_reset(0);
-
- /* Init timings : we use PIO mode 0 timings */
- t = 1000000000 / gd->ips_clk; /* period in ns */
- cfg.bytes.field1 = 3;
- cfg.bytes.field2 = 3;
- cfg.bytes.field3 = (pio_specs.t1 + t) / t;
- cfg.bytes.field4 = (pio_specs.t2_8 + t) / t;
-
- out_be32(&im->pata.pata_time1, cfg.config);
-
- cfg.bytes.field1 = (pio_specs.t2_8 + t) / t;
- cfg.bytes.field2 = (pio_specs.tA + t) / t + 2;
- cfg.bytes.field3 = 1;
- cfg.bytes.field4 = (pio_specs.t4 + t) / t;
-
- out_be32(&im->pata.pata_time2, cfg.config);
-
- cfg.config = in_be32(&im->pata.pata_time3);
- cfg.bytes.field1 = (pio_specs.t9 + t) / t;
-
- out_be32(&im->pata.pata_time3, cfg.config);
-
- debug ("PATA preinit complete.\n");
-
- return 0;
-}
-
-#endif /* defined(CONFIG_IDE_RESET) */
diff --git a/cpu/mpc512x/iim.c b/cpu/mpc512x/iim.c
deleted file mode 100644
index 8f2eb37..0000000
--- a/cpu/mpc512x/iim.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * Copyright 2008 Silicon Turnkey Express, Inc.
- * Martha Marx <mmarx@silicontkx.com>
- *
- * ADS5121 IIM (Fusebox) Interface
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-
-#ifdef CONFIG_CMD_FUSE
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char cur_bank = '1';
-
-char *iim_err_msg(u32 err)
-{
- static char *IIM_errs[] = {
- "Parity Error in cache",
- "Explicit Sense Cycle Error",
- "Write to Locked Register Error",
- "Read Protect Error",
- "Override Protect Error",
- "Write Protect Error"};
-
- int i;
-
- if (!err)
- return "";
- for (i = 1; i < 8; i++)
- if (err & (1 << i))
- printf("IIM - %s\n", IIM_errs[i-1]);
- return "";
-}
-
-int in_range(int n, int min, int max, char *err, char *usg)
-{
- if (n > max || n < min) {
- printf(err);
- printf("Usage:\n%s\n", usg);
- return 0;
- }
- return 1;
-}
-
-int ads5121_fuse_read(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb, dummy;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- dummy = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("\tRead protect fuse is set\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- return 0;
- }
- printf("Reading Bank %d cache\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, num--, f++) {
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)(iim_fb[f]));
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (ctr % 4 != 0)
- printf("\n");
-}
-
-int ads5121_fuse_override(int bank, int f, u8 val)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 *iim_fb;
- u32 iim_stat;
- int i;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fb = (u32 *)&(iim->fbac0);
- else
- iim_fb = (u32 *)&(iim->fbac1);
-/* try a read to see if Read Protect is set */
- iim_stat = in_be32(&iim_fb[0]);
- if (in_be32(&iim->err) & IIM_ERR_RPE) {
- printf("Read protect fuse is set on bank %d;"
- "Override protect may also be set\n", bank);
- printf("An attempt will be made to override\n");
- out_be32(&iim->err, IIM_ERR_RPE);
- }
- if (iim_stat & IIM_FBAC_FBOP) {
- printf("Override protect fuse is set on bank %d\n", bank);
- return 1;
- }
- if (f > IIM_FMAX) /* reset the entire bank */
- for (i = 0; i < IIM_FMAX + 1; i++)
- out_be32(&iim_fb[i], 0);
- else
- out_be32(&iim_fb[f], val);
- return 0;
-}
-
-int ads5121_fuse_prog(cmd_tbl_t *cmdtp, int bank, char *fuseno_bitno)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- int f, i, bitno;
- u32 stat, err;
-
- f = simple_strtol(fuseno_bitno, NULL, 10);
- if (f == 0 && fuseno_bitno[0] != '0')
- f = -1;
- if (!in_range(f, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- bitno = -1;
- for (i = 0; i < 6; i++) {
- if (fuseno_bitno[i] == '_') {
- bitno = simple_strtol(&(fuseno_bitno[i+1]), NULL, 10);
- if (bitno == 0 && fuseno_bitno[i+1] != '0')
- bitno = -1;
- break;
- }
- }
- if (!in_range(bitno, 0, 7, "Bit number ranges from 0-7\n"
- "Example of <frow_bitno>: \"18_4\" sets bit 4 of row 18\n",
- cmdtp->usage))
- return 1;
- out_be32(&iim->err, in_be32(&iim->err));
- out_be32(&iim->prg_p, IIM_PRG_P_SET);
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, bitno));
-#ifdef DEBUG
- printf("Programming disabled with DEBUG defined \n");
- printf(""Set up to pro
- printf("iim.ua = %x; iim.la = %x\n", iim->ua, iim->la);
-#else
- out_be32(&iim->fctl, IIM_FCTL_PROG_PULSE | IIM_FCTL_PROG);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- out_be32(&iim->prg_p, 0);
- err = in_be32(&iim->err);
- if (stat & IIM_STAT_PRGD) {
- if (!(err & (IIM_ERR_WPE | IIM_ERR_WPE))) {
- printf("Fuse is successfully set");
- if (err)
- printf(" - however there are other errors");
- printf("\n");
- }
- iim->stat = 0;
- }
- if (err) {
- iim_err_msg(err);
- out_be32(&iim->err, in_be32(&iim->err));
- }
-#endif
-}
-
-int ads5121_fuse_sense(int bank, int fstart, int num)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 stat, err, err_hold = 0;
- int f, ctr;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- if (iim_fbac & IIM_FBAC_FBESP) {
- printf("\tSense Protect disallows this operation\n");
- out_be32(&iim->err, IIM_FBAC_FBESP);
- return 1;
- }
- err = in_be32(&iim->err);
- if (err) {
- iim_err_msg(err);
- err_hold |= err;
- }
- if (err & IIM_ERR_RPE)
- printf("\tRead protect fuse is set; "
- "Sense Protect may be set but will be attempted\n");
- if (err)
- out_be32(&iim->err, err);
- printf("Sensing fuse(s) on Bank %d\n", bank);
- for (f = fstart, ctr = 0; num > 0; ctr++, f++, num--) {
- out_be32(&iim->ua, IIM_SET_UA(bank, f));
- out_be32(&iim->la, IIM_SET_LA(f, 0));
- out_be32(&iim->fctl, IIM_FCTL_ESNS_N);
- do
- udelay(20);
- while ((stat = in_be32(&iim->stat)) & IIM_STAT_BUSY);
- err = in_be32(&iim->err);
- if (err & IIM_ERR_SNSE) {
- iim_err_msg(err);
- out_be32(&iim->err, IIM_ERR_SNSE);
- return 1;
- }
- if (stat & IIM_STAT_SNSD) {
- out_be32(&iim->stat, 0);
- if (ctr % 4 == 0)
- printf("F%2d:", f);
- printf("\t%#04x", (u8)iim->sdat);
- if (ctr % 4 == 3)
- printf("\n");
- }
- if (err) {
- err_hold |= err;
- out_be32(&iim->err, err);
- }
- }
- if (ctr % 4 != 0)
- printf("\n");
- if (err_hold)
- iim_err_msg(err_hold);
-
- return 0;
-}
-
-int ads5121_fuse_stat(int bank)
-{
- iim512x_t *iim = &((immap_t *) CONFIG_SYS_IMMR)->iim;
- u32 iim_fbac;
- u32 err;
-
- out_be32(&iim->err, in_be32(&iim->err));
- if (bank == 0)
- iim_fbac = in_be32(&iim->fbac0);
- else
- iim_fbac = in_be32(&iim->fbac1);
- err = in_be32(&iim->err);
- if (err)
- iim_err_msg(err);
- if (err & IIM_ERR_RPE || iim_fbac & IIM_FBAC_FBRP) {
- if (iim_fbac == 0)
- printf("Since protection settings can't be read - "
- "try sensing fuse row 0;\n");
- return 0;
- }
- if (iim_fbac & IIM_PROTECTION)
- printf("Protection Fuses Bank %d = %#04x:\n", bank, iim_fbac);
- else if (!(err & IIM_ERR_RPE))
- printf("No Protection fuses are set\n");
- if (iim_fbac & IIM_FBAC_FBWP)
- printf("\tWrite Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBOP)
- printf("\tOverride Protect fuse is set\n");
- if (iim_fbac & IIM_FBAC_FBESP)
- printf("\tSense Protect Fuse is set\n");
- out_be32(&iim->err, in_be32(&iim->err));
-
- return 0;
-}
-
-int do_ads5121_fuse(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int frow, n, v, bank;
-
- if (cur_bank == '0')
- bank = 0;
- else
- bank = 1;
-
- switch (argc) {
- case 0:
- case 1:
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 2:
- if (strncmp(argv[1], "stat", 4) == 0)
- return ads5121_fuse_stat(bank);
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, 0, IIM_FMAX + 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, IIM_FMAX + 1, 0);
- if (strncmp(argv[1], "bank", 4) == 0) {
- printf("Active Fuse Bank is %c\n", cur_bank);
- return 0;
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 3:
- if (strncmp(argv[1], "bank", 4) == 0) {
- if (argv[2][0] == '0')
- cur_bank = '0';
- else if (argv[2][0] == '1')
- cur_bank = '1';
- else {
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-
- printf("Setting Active Fuse Bank to %c\n", cur_bank);
- return 0;
- }
- if (strncmp(argv[1], "prog", 4) == 0)
- return ads5121_fuse_prog(cmdtp, bank, argv[2]);
-
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0)
- return ads5121_fuse_read(bank, frow, 1);
- if (strncmp(argv[1], "ovride", 6) == 0)
- return ads5121_fuse_override(bank, frow, 0);
- if (strncmp(argv[1], "sense", 5) == 0)
- return ads5121_fuse_sense(bank, frow, 1);
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- case 4:
- frow = (int)simple_strtol(argv[2], NULL, 10);
- if (frow == 0 && argv[2][0] != '0')
- frow = -1;
- if (!in_range(frow, 0, IIM_FMAX,
- "<frow> must be between 0-31\n\n", cmdtp->usage))
- return 1;
- if (strncmp(argv[1], "read", 4) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_read(bank, frow, n);
- }
- if (strncmp(argv[1], "ovride", 6) == 0) {
- v = (int)simple_strtol(argv[3], NULL, 10);
- return ads5121_fuse_override(bank, frow, v);
- }
- if (strncmp(argv[1], "sense", 5) == 0) {
- n = (int)simple_strtol(argv[3], NULL, 10);
- if (!in_range(frow + n, frow + 1, IIM_FMAX + 1,
- "<frow>+<n> must be between 1-32\n\n",
- cmdtp->usage))
- return 1;
- return ads5121_fuse_sense(bank, frow, n);
- }
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- default: /* at least 5 args */
- printf("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-}
-
-U_BOOT_CMD(
- fuse, CONFIG_SYS_MAXARGS, 0, do_ads5121_fuse,
- " - Read, Sense, Override or Program Fuses\n",
- "bank <n> - sets active Fuse Bank to 0 or 1\n"
- " no args shows current active bank\n"
- "fuse stat - print active fuse bank's protection status\n"
- "fuse read [<frow> [<n>]] - print <n> fuse rows starting at <frow>\n"
- " no args to print entire bank's fuses\n"
- "fuse ovride [<frow> [<v>]]- override fuses at <frow> with <v>\n"
- " no <v> defaults to 0 for the row\n"
- " no args resets entire bank to 0\n"
- " NOTE - settings persist until hard reset\n"
- "fuse sense [<frow>] - senses current fuse at <frow>\n"
- " no args for entire bank\n"
- "fuse prog <frow_bit> - program fuse at row <frow>, bit <_bit>\n"
- " <frow> is 0-31, <bit> is 0-7; eg. 13_2 \n"
- " WARNING - this is permanent"
-);
-#endif /* CONFIG_CMD_FUSE */
diff --git a/cpu/mpc512x/interrupts.c b/cpu/mpc512x/interrupts.c
deleted file mode 100644
index ef7c773..0000000
--- a/cpu/mpc512x/interrupts.c
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- return 0;
-}
-
-/*
- * Install and free an interrupt handler.
- */
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
-}
-
-void irq_free_handler (int irq)
-{
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c
deleted file mode 100644
index be20947..0000000
--- a/cpu/mpc512x/iopin.c
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * (C) Copyright 2008
- * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com
- * mpc512x I/O pin/pad initialization for the ADS5121 board
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/types.h>
-#include <asm/io.h>
-
-void iopin_initialize(iopin_t *ioregs_init, int len)
-{
- short i, j, p;
- u32 *reg;
- immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- reg = (u32 *)&(im->io_ctrl);
-
- if (sizeof(ioregs_init) == 0)
- return;
-
- for (i = 0; i < len; i++) {
- for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long);
- p < ioregs_init[i].nr_pins; p++, j++) {
- if (ioregs_init[i].bit_or)
- setbits_be32(reg + j, ioregs_init[i].val);
- else
- out_be32 (reg + j, ioregs_init[i].val);
- }
- }
- return;
-}
diff --git a/cpu/mpc512x/pci.c b/cpu/mpc512x/pci.c
deleted file mode 100644
index 141db8b..0000000
--- a/cpu/mpc512x/pci.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * Copyright (C) 2009-2010 DENX Software Engineering <wd@denx.de>
- * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/global_data.h>
-#include <pci.h>
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* System RAM mapped to PCI space */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-
-static struct pci_controller pci_hose;
-
-
-/**************************************************************************
- * pci_init_board()
- *
- */
-void
-pci_init_board(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile law512x_t *pci_law;
- volatile pot512x_t *pci_pot;
- volatile pcictrl512x_t *pci_ctrl;
- volatile pciconf512x_t *pci_conf;
- u16 reg16;
- u32 reg32;
- u32 dev;
- int i;
- struct pci_controller *hose;
-
- /* Set PCI divider for 33MHz */
- reg32 = in_be32(&im->clk.scfr[0]);
- reg32 &= ~(SCFR1_PCI_DIV_MASK);
- reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT;
- out_be32(&im->clk.scfr[0], reg32);
-
- clrsetbits_be32(&im->clk.scfr[0],
- SCFR1_PCI_DIV_MASK,
- SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT
- );
-
- pci_law = im->sysconf.pcilaw;
- pci_pot = im->ios.pot;
- pci_ctrl = &im->pci_ctrl;
- pci_conf = &im->pci_conf;
-
- hose = &pci_hose;
-
- /*
- * Release PCI RST Output signal
- */
- out_be32(&pci_ctrl->gcr, 0);
- udelay(2000);
- out_be32(&pci_ctrl->gcr, 1);
-
- /* We need to wait at least a 1sec based on PCI specs */
- for (i = 0; i < 1000; i++)
- udelay(1000);
-
- /*
- * Configure PCI Local Access Windows
- */
- out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M);
-
- out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR);
- out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M);
-
- /*
- * Configure PCI Outbound Translation Windows
- */
-
- /* PCI mem space - prefetch */
- out_be32(&pci_pot[0].potar,
- (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[0].pobar,
- (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[0].pocmr,
- POCMR_EN | POCMR_PRE | POCMR_CM_256M);
-
- /* PCI IO space */
- out_be32(&pci_pot[1].potar,
- (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[1].pobar,
- (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[1].pocmr,
- POCMR_EN | POCMR_IO | POCMR_CM_16M);
-
- /* PCI mmio - non-prefetch mem space */
- out_be32(&pci_pot[2].potar,
- (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK);
- out_be32(&pci_pot[2].pobar,
- (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK);
- out_be32(&pci_pot[2].pocmr,
- POCMR_EN | POCMR_CM_256M);
-
- /*
- * Configure PCI Inbound Translation Windows
- */
-
- /* we need RAM mapped to PCI space for the devices to
- * access main memory */
- out_be32(&pci_ctrl[0].pitar1, 0x0);
- out_be32(&pci_ctrl[0].pibar1, 0x0);
- out_be32(&pci_ctrl[0].piebar1, 0x0);
- out_be32(&pci_ctrl[0].piwar1,
- PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
- PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1));
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* PCI memory prefetch space */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI_MEM_BASE,
- CONFIG_SYS_PCI_MEM_PHYS,
- CONFIG_SYS_PCI_MEM_SIZE,
- PCI_REGION_MEM|PCI_REGION_PREFETCH);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI_MMIO_BASE,
- CONFIG_SYS_PCI_MMIO_PHYS,
- CONFIG_SYS_PCI_MMIO_SIZE,
- PCI_REGION_MEM);
-
- /* PCI IO space */
- pci_set_region(hose->regions + 2,
- CONFIG_SYS_PCI_IO_BASE,
- CONFIG_SYS_PCI_IO_PHYS,
- CONFIG_SYS_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* System memory space */
- pci_set_region(hose->regions + 3,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- gd->ram_size,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 4;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR + 0x8300),
- (CONFIG_SYS_IMMR + 0x8304));
-
- pci_register_hose(hose);
-
- /*
- * Write to Command register
- */
- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int tmp[2];
- const char *path;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
- path = fdt_getprop(blob, nodeoffset, "pci", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose.first_busno);
- tmp[1] = cpu_to_be32(pci_hose.last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
- }
-}
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c
deleted file mode 100644
index ec2f41b..0000000
--- a/cpu/mpc512x/serial.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * (C) Copyright 2000 - 2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based ont the MPC5200 PSC driver.
- * Adapted for MPC512x by Jan Wrobel <wrr@semihalf.com>
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PSC_CONSOLE)
-
-static void fifo_init (volatile psc512x_t *psc)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
-
- /* reset Rx & Tx fifo slice */
- out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE);
- out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE);
-
- /* disable Tx & Rx FIFO interrupts */
- out_be32(&psc->rfintmask, 0);
- out_be32(&psc->tfintmask, 0);
-
- out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16));
- out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16));
-
- /* enable Tx & Rx FIFO slice */
- out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE);
- out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE);
-
- out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE);
- __asm__ volatile ("sync");
-}
-
-void serial_setbrg(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
- unsigned long baseclk, div;
-
- /* calculate dividor for setting PSC CTUR and CTLR registers */
- baseclk = (gd->ips_clk + 8) / 16;
- div = (baseclk + (gd->baudrate / 2)) / gd->baudrate;
-
- out_8(&psc->ctur, (div >> 8) & 0xff);
- out_8(&psc->ctlr, div & 0xff); /* set baudrate */
-}
-
-int serial_init(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- fifo_init (psc);
-
- /* set MR register to point to MR1 */
- out_8(&psc->command, PSC_SEL_MODE_REG_1);
-
- /* disable Tx/Rx */
- out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE);
-
- /* choose the prescaler by 16 for the Tx/Rx clock generation */
- out_be16(&psc->psc_clock_select, 0xdd00);
-
- /* switch to UART mode */
- out_be32(&psc->sicr, 0);
-
- /* mode register points to mr1 */
- /* configure parity, bit length and so on in mode register 1*/
- out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE);
- /* now, mode register points to mr2 */
- out_8(&psc->mode, PSC_MODE_1_STOPBIT);
-
- /* set baudrate */
- serial_setbrg();
-
- /* disable all interrupts */
- out_be16(&psc->psc_imr, 0);
-
- /* reset and enable Rx/Tx */
- out_8(&psc->command, PSC_RST_RX);
- out_8(&psc->command, PSC_RST_TX);
- out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE);
-
- return 0;
-}
-
-void serial_putc (const char c)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- if (c == '\n')
- serial_putc ('\r');
-
- /* Wait for last character to go. */
- while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
- ;
-
- out_8(&psc->tfdata_8, c);
-}
-
-void serial_putc_raw (const char c)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- /* Wait for last character to go. */
- while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP))
- ;
-
- out_8(&psc->tfdata_8, c);
-}
-
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- /* Wait for a character to arrive. */
- while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY)
- ;
-
- return in_8(&psc->rfdata_8);
-}
-
-int serial_tstc (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY);
-}
-
-void serial_setrts(int s)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- if (s) {
- /* Assert RTS (become LOW) */
- out_8(&psc->op1, 0x1);
- }
- else {
- /* Negate RTS (become HIGH) */
- out_8(&psc->op0, 0x1);
- }
-}
-
-int serial_getcts(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE];
-
- return (in_8(&psc->ip) & 0x1) ? 0 : 1;
-}
-#endif /* CONFIG_PSC_CONSOLE */
diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c
deleted file mode 100644
index ce8d094..0000000
--- a/cpu/mpc512x/speed.c
+++ /dev/null
@@ -1,156 +0,0 @@
-/*
- * (C) Copyright 2000-2009
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC83xx code.
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static int spmf_mult[] = {
- 68, 1, 12, 16,
- 20, 24, 28, 32,
- 36, 40, 44, 48,
- 52, 56, 60, 64
-};
-
-static int cpmf_mult[][2] = {
- {0, 1}, {0, 1}, /* 0 and 1 are not valid */
- {1, 1}, {3, 2},
- {2, 1}, {5, 2},
- {3, 1}, {7, 2},
- {0, 1}, {0, 1}, /* and all above 7 are not valid too */
- {0, 1}, {0, 1},
- {0, 1}, {0, 1},
- {0, 1}, {0, 1}
-};
-
-static int sys_dividors[][2] = {
- {2, 1}, {5, 2}, {3, 1}, {7, 2}, {4, 1},
- {9, 2}, {5, 1}, {7, 1}, {6, 1}, {8, 1},
- {9, 1}, {11, 1}, {10, 1}, {12, 1}, {13, 1},
- {15, 1}, {14, 1}, {16, 1}, {17, 1}, {19, 1},
- {18, 1}, {20, 1}, {21, 1}, {23, 1}, {22, 1},
- {24, 1}, {25, 1}, {27, 1}, {26, 1}, {28, 1},
- {29, 1}, {31, 1}, {30, 1}, {32, 1}, {33, 1}
-};
-
-int get_clocks (void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u8 spmf;
- u8 cpmf;
- u8 sys_div;
- u8 ips_div;
- u8 pci_div;
- u32 ref_clk = CONFIG_SYS_MPC512X_CLKIN;
- u32 spll;
- u32 sys_clk;
- u32 core_clk;
- u32 csb_clk;
- u32 ips_clk;
- u32 pci_clk;
- u32 reg;
-
- reg = in_be32(&im->sysconf.immrbar);
- if ((reg & IMMRBAR_BASE_ADDR) != (u32) im)
- return -1;
-
- reg = in_be32(&im->clk.spmr);
- spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT;
- spll = ref_clk * spmf_mult[spmf];
-
- reg = in_be32(&im->clk.scfr[1]);
- sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT;
- sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0];
-
- csb_clk = sys_clk / 2;
-
- reg = in_be32(&im->clk.spmr);
- cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT;
- core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1];
-
- reg = in_be32(&im->clk.scfr[0]);
- ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT;
- if (ips_div != 0) {
- ips_clk = csb_clk / ips_div;
- } else {
- /* in case we cannot get a sane IPS divisor, fail gracefully */
- ips_clk = 0;
- }
-
- reg = in_be32(&im->clk.scfr[0]);
- pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT;
- if (pci_div != 0) {
- pci_clk = csb_clk / pci_div;
- } else {
- /* in case we cannot get a sane IPS divisor, fail gracefully */
- pci_clk = 333333;
- }
-
- gd->ips_clk = ips_clk;
- gd->pci_clk = pci_clk;
- gd->csb_clk = csb_clk;
- gd->cpu_clk = core_clk;
- gd->bus_clk = csb_clk;
- return 0;
-
-}
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- return gd->csb_clk;
-}
-
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char buf[32];
-
- printf("Clock configuration:\n");
- printf(" CPU: %-4s MHz\n", strmhz(buf, gd->cpu_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
- printf(" IPS Bus: %-4s MHz\n", strmhz(buf, gd->ips_clk));
- printf(" PCI: %-4s MHz\n", strmhz(buf, gd->pci_clk));
- printf(" DDR: %-4s MHz\n", strmhz(buf, 2*gd->csb_clk));
- return 0;
-}
-
-U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "print clock configuration",
- " clocks"
-);
-
-int prt_mpc512x_clks (void)
-{
- do_clocks (NULL, 0, 0, NULL);
- return (0);
-}
diff --git a/cpu/mpc512x/start.S b/cpu/mpc512x/start.S
deleted file mode 100644
index d26b617..0000000
--- a/cpu/mpc512x/start.S
+++ /dev/null
@@ -1,711 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000-2009 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Based on the MPC83xx code.
- */
-
-/*
- * U-Boot - Startup Code for MPC512x based Embedded Boards
- */
-
-#include <config.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_521X 1 /* needed for Linux kernel header files*/
-
-#include <asm/immap_512x.h>
-#include "asm-offsets.h"
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC512X"
-#endif
-
-/*
- * Floating Point enable, Machine Check and Recoverable Interr.
- */
-#undef MSR_KERNEL
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/* Macros for manipulating CSx_START/STOP */
-#define START_REG(start) ((start) >> 16)
-#define STOP_REG(start, size) (((start) + (size) - 1) >> 16)
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Magic number and version string
- */
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii " ", CONFIG_IDENT_STRING, "\0"
-
-/*
- * Vector Table
- */
- .text
- . = EXC_OFF_SYS_RESET
-
- .globl _start
- /* Start from here after reset/power on */
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, UnknownException)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-/* Floating Point Unit unavailable exception */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
-/* Decrementer */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
-/* Critical interrupt */
- STD_EXCEPTION(0xa00, Critical, UnknownException)
-
-/* System Call */
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-/* Trace interrupt */
- STD_EXCEPTION(0xd00, Trace, UnknownException)
-
-/* Performance Monitor interrupt */
- STD_EXCEPTION(0xf00, PerfMon, UnknownException)
-
-/* Intruction Translation Miss */
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
-
-/* Data Load Translation Miss */
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
-
-/* Data Store Translation Miss */
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-
-/* Instruction Address Breakpoint */
- STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException)
-
-/* System Management interrupt */
- STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-boot_cold:
- /* Save msr contents */
- mfmsr r5
-
- /* Set IMMR area to our preferred location */
- lis r4, CONFIG_DEFAULT_IMMR@h
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
- stw r3, IMMRBAR(r4)
- mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */
-
- /* Initialise the machine */
- bl cpu_early_init
-
- /*
- * Set up Local Access Windows:
- *
- * 1) Boot/CS0 (boot FLASH)
- * 2) On-chip SRAM (initial stack purposes)
- */
-
- /* Boot CS/CS0 window range */
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
-
- lis r4, START_REG(CONFIG_SYS_FLASH_BASE)
- ori r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE)
- stw r4, LPCS0AW(r3)
-
- /*
- * The SRAM window has a fixed size (256K), so only the start address
- * is necessary
- */
- lis r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00
- stw r4, SRAMBAR(r3)
-
- /*
- * According to MPC5121e RM, configuring local access windows should
- * be followed by a dummy read of the config register that was
- * modified last and an isync
- */
- lwz r4, SRAMBAR(r3)
- isync
-
- /*
- * Set configuration of the Boot/CS0, the SRAM window does not have a
- * config register so no params can be set for it
- */
- lis r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h
- ori r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l
-
- lis r4, CONFIG_SYS_CS0_CFG@h
- ori r4, r4, CONFIG_SYS_CS0_CFG@l
- stw r4, CS0_CONFIG(r3)
-
- /* Master enable all CS's */
- lis r4, CS_CTRL_ME@h
- ori r4, r4, CS_CTRL_ME@l
- stw r4, CS_CTRL(r3)
-
- lis r4, (CONFIG_SYS_MONITOR_BASE)@h
- ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
- addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r5
- blr
-
-in_flash:
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable & stack humble */
- /*------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- lis r3, CONFIG_SYS_IMMR@h
- /* run low-level CPU init code (in Flash) */
- bl cpu_init_f
-
- /* r3: BOOTFLAG */
- mr r3, r21
- /* run 1st part of board init code (in Flash) */
- bl board_init_f
-
- /* NOTREACHED - board_init_f() does not return */
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the machine, it expects original MSR contents to be in r5.
- */
-cpu_early_init:
- /* Initialize machine status; enable machine check interrupt */
- /*-----------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */
-#endif
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */
-
- lis r3, CONFIG_SYS_IMMR@h
-
-#if defined(CONFIG_WATCHDOG)
- /* Initialise the watchdog and reset it */
- /*--------------------------------------*/
- lis r4, CONFIG_SYS_WATCHDOG_VALUE
- ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
- stw r4, SWCRR(r3)
-
- /* reset */
- li r4, 0x556C
- sth r4, SWSRR@l(r3)
- li r4, 0x0
- ori r4, r4, 0xAA39
- sth r4, SWSRR@l(r3)
-#else
- /* Disable the watchdog */
- /*----------------------*/
- lwz r4, SWCRR(r3)
- /*
- * Check to see if it's enabled for disabling: once disabled by s/w
- * it's not possible to re-enable it
- */
- andi. r4, r4, 0x4
- beq 1f
- xor r4, r4, r4
- stw r4, SWCRR(r3)
-1:
-#endif /* CONFIG_WATCHDOG */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*------------------------------------------------------*/
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- SYNC
- mtspr HID2, r3
- sync
- blr
-
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*-------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
- * + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* copy */
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
-
- addi r0,r5,3
- srwi. r0,r0,2
- mtctr r0
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* and compare */
-20: lwzu r20,4(r8)
- lwzu r21,4(r7)
- xor. r22, r20, r21
- bne 30f
- bdnz 20b
- b 4f
-
- /* compare failed */
-30: li r3, 0
- blr
-
-2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_Trace - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
diff --git a/cpu/mpc512x/traps.c b/cpu/mpc512x/traps.c
deleted file mode 100644
index 786f4a5..0000000
--- a/cpu/mpc512x/traps.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * (C) Copyright 2000 - 2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Derived from the MPC83xx code.
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware
- * exceptions
- */
-
-#include <common.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace (unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf ("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *) *sp;
- }
- putc ('\n');
-}
-
-void show_regs (struct pt_regs * regs)
-{
- int i;
-
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0,
- regs->msr & MSR_IR ? 1 : 0,
- regs->msr & MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
- }
-
- printf ("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception (int signr, struct pt_regs *regs)
-{
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Exception at pc %lx signal %d", regs->nip,signr);
-}
-
-
-void
-MachineCheckException (struct pt_regs *regs)
-{
- unsigned long fixup;
-
- if ((fixup = search_exception_table (regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check.\nCaused by (from msr): ");
- printf ("regs %p ",regs);
- switch (regs->msr & 0x00FF0000) {
- case (0x80000000 >> 10):
- puts ("Instruction cache parity signal\n");
- break;
- case (0x80000000 >> 11):
- puts ("Data cache parity signal\n");
- break;
- case (0x80000000 >> 12):
- puts ("Machine check signal\n");
- break;
- case (0x80000000 >> 13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
-
- panic ("machine check");
-}
-
-void
-AlignmentException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Alignment Exception");
-}
-
-void
-ProgramCheckException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Program Check Exception");
-}
-
-void
-SoftEmuException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *)regs->gpr[1]);
- panic ("Software Emulation Exception");
-}
-
-
-void
-UnknownException (struct pt_regs *regs)
-{
-#ifdef CONFIG_CMD_KGDB
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
-}
-
-#ifdef CONFIG_CMD_BEDBUG
-extern void do_bedbug_breakpoint (struct pt_regs *);
-#endif
-
-void
-DebugException (struct pt_regs *regs)
-{
- printf ("Debugger trap at @ %lx\n", regs->nip );
- show_regs (regs);
-#ifdef CONFIG_CMD_BEDBUG
- do_bedbug_breakpoint (regs);
-#endif
-}
diff --git a/cpu/mpc512x/u-boot.lds b/cpu/mpc512x/u-boot.lds
deleted file mode 100644
index 2e260eb..0000000
--- a/cpu/mpc512x/u-boot.lds
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * (C) Copyright 2007 DENX Software Engineering.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc512x/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/cpu/mpc5xx/Makefile b/cpu/mpc5xx/Makefile
deleted file mode 100644
index 8aab018..0000000
--- a/cpu/mpc5xx/Makefile
+++ /dev/null
@@ -1,59 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# File: cpu/mpc5xx/Makefile
-#
-# Discription: Makefile to build mpc5xx cpu configuration.
-# Will include top config.mk which itselfs
-# uses the definitions made in cpu/mpc5xx/config.mk
-#
-
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS = serial.o cpu.o cpu_init.o interrupts.o traps.o speed.o spi.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc5xx/config.mk b/cpu/mpc5xx/config.mk
deleted file mode 100644
index 7854924..0000000
--- a/cpu/mpc5xx/config.mk
+++ /dev/null
@@ -1,36 +0,0 @@
-#
-# (C) Copyright 2003
-# Martin Winistoerfer, martinwinistoerfer@gmx.ch.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# File: config.mk
-#
-# Discription: compiler flags and make definitions
-#
-
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_5xx -ffixed-r2 -mpowerpc -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc5xx/u-boot.lds
diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c
deleted file mode 100644
index 7fffebc..0000000
--- a/cpu/mpc5xx/cpu.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: cpu.c
- *
- * Discription: Some cpu specific function for watchdog,
- * cpu version test, clock setting ...
- *
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (defined(CONFIG_MPC555))
-# define ID_STR "MPC555/556"
-
-/*
- * Check version of cpu with Processor Version Register (PVR)
- */
-static int check_cpu_version (long clock, uint pvr, uint immr)
-{
- char buf[32];
- /* The highest 16 bits should be 0x0002 for a MPC555/556 */
- if ((pvr >> 16) == 0x0002) {
- printf (" " ID_STR " Version %x", (pvr >> 16));
- printf (" at %s MHz:", strmhz (buf, clock));
- } else {
- printf ("Not supported cpu version");
- return -1;
- }
- return 0;
-}
-#endif /* CONFIG_MPC555 */
-
-
-/*
- * Check version of mpc5xx
- */
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- uint immr = get_immr (0); /* Return full IMMR contents */
- uint pvr = get_pvr (); /* Retrieve PVR register */
-
- puts ("CPU: ");
-
- return check_cpu_version (clock, pvr, immr);
-}
-
-/*
- * Called by macro WATCHDOG_RESET
- */
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_5xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-
-/*
- * Will clear software reset
- */
-void reset_5xx_watchdog (volatile immap_t * immr)
-{
- /* Use the MPC5xx Internal Watchdog */
- immr->im_siu_conf.sc_swsr = 0x556c; /* Prevent SW time-out */
- immr->im_siu_conf.sc_swsr = 0xaa39;
-}
-
-#endif /* CONFIG_WATCHDOG */
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
- volatile immap_t *immr = (volatile immap_t *) CONFIG_SYS_IMMR;
- ulong oscclk, factor;
-
- if (immr->im_clkrst.car_sccr & SCCR_TBS) {
- return (gd->cpu_clk / 16);
- }
-
- factor = (((CONFIG_SYS_PLPRCR) & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT) + 1;
-
- oscclk = gd->cpu_clk / factor;
-
- if ((immr->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
- return (oscclk / 4);
- }
- return (oscclk / 16);
-}
-
-void dcache_enable (void)
-{
- return;
-}
-
-void dcache_disable (void)
-{
- return;
-}
-
-int dcache_status (void)
-{
- return 0; /* always off */
-}
-
-/*
- * Reset board
- */
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
-#if defined(CONFIG_PATI)
- volatile ulong *addr = (ulong *) CONFIG_SYS_RESET_ADDRESS;
- *addr = 1;
-#else
- ulong addr;
-
- /* Interrupts off, enable reset */
- __asm__ volatile (" mtspr 81, %r0 \n\t"
- " mfmsr %r3 \n\t"
- " rlwinm %r31,%r3,0,25,23\n\t"
- " mtmsr %r31 \n\t");
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*) (void)) addr) ();
-#endif /* #if defined(CONFIG_PATI) */
- return 1;
-}
diff --git a/cpu/mpc5xx/cpu_init.c b/cpu/mpc5xx/cpu_init.c
deleted file mode 100644
index cb4bf84..0000000
--- a/cpu/mpc5xx/cpu_init.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: cpu_init.c
- *
- * Discription: Contains initialisation functions to setup
- * the cpu properly
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <watchdog.h>
-
-/*
- * Setup essential cpu registers to run
- */
-void cpu_init_f (volatile immap_t * immr)
-{
- volatile memctl5xx_t *memctl = &immr->im_memctl;
- ulong reg;
-
- /* SYPCR - contains watchdog control. This will enable watchdog */
- /* if CONFIG_WATCHDOG is set */
- immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
-
- /* SIUMCR - contains debug pin configuration */
- immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-
- /* Initialize timebase. Unlock TBSCRK */
- immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
- immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
- /* Full IMB bus speed */
- immr->im_uimb.uimb_umcr = CONFIG_SYS_UMCR;
-
- /* Time base and decrementer will be enables (TBE) */
- /* in init_timebase() in time.c called from board_init_f(). */
-
- /* Initialize the PIT. Unlock PISCRK */
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-#if !defined(CONFIG_PATI)
- /* PATI sest PLL in start.S */
- /* PLL (CPU clock) settings */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
- * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
- * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the currentMF
- * field value.
- */
-#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
- reg = CONFIG_SYS_PLPRCR; /* reset control bits */
-#else
- reg = immr->im_clkrst.car_plprcr;
- reg &= PLPRCR_MF_MSK; /* isolate MF field */
- reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
-#endif
- immr->im_clkrst.car_plprcr = reg;
-
-#endif /* !defined(CONFIG_PATI) */
-
- /* System integration timers. CONFIG_SYS_MASK has EBDF configuration */
- immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
- reg = immr->im_clkrst.car_sccr;
- reg &= SCCR_MASK;
- reg |= CONFIG_SYS_SCCR;
- immr->im_clkrst.car_sccr = reg;
-
- /* Memory Controller */
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-}
-
-/*
- * Initialize higher level parts of cpu
- */
-int cpu_init_r (void)
-{
- /* Nothing to do at the moment */
- return (0);
-}
diff --git a/cpu/mpc5xx/interrupts.c b/cpu/mpc5xx/interrupts.c
deleted file mode 100644
index 167543f..0000000
--- a/cpu/mpc5xx/interrupts.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2000-2002 Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: interrupt.c
- *
- * Discription: Contains interrupt routines needed by U-Boot
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_PATI)
-/* PATI uses IRQs for PCI doorbell */
-#undef NR_IRQS
-#define NR_IRQS 16
-#endif
-
-struct interrupt_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-/*
- * Initialise interrupts
- */
-
-int interrupt_init_cpu (ulong *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int vec;
-
- /* Decrementer used here for status led */
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- /* Disable all interrupts */
- immr->im_siu_conf.sc_simask = 0;
- for (vec=0; vec<NR_IRQS; vec++) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
- return (0);
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- ulong simask, newmask;
- ulong vec, v_bit;
-
- /*
- * read the SIVEC register and shift the bits down
- * to get the irq number
- */
- vec = immr->im_siu_conf.sc_sivec;
- irq = vec >> 26;
- v_bit = 0x80000000UL >> irq;
-
- /*
- * Read Interrupt Mask Register and Mask Interrupts
- */
- simask = immr->im_siu_conf.sc_simask;
- newmask = simask & (~(0xFFFF0000 >> irq));
- immr->im_siu_conf.sc_simask = newmask;
-
- if (!(irq & 0x1)) { /* External Interrupt ? */
- ulong siel;
-
- /*
- * Read Interrupt Edge/Level Register
- */
- siel = immr->im_siu_conf.sc_siel;
-
- if (siel & v_bit) { /* edge triggered interrupt ? */
- /*
- * Rewrite SIPEND Register to clear interrupt
- */
- immr->im_siu_conf.sc_sipend = v_bit;
- }
- }
-
- if (irq_vecs[irq].handler != NULL) {
- irq_vecs[irq].handler (irq_vecs[irq].arg);
- } else {
- printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
- irq, vec);
- /* turn off the bogus interrupt to avoid it from now */
- simask &= ~v_bit;
- }
- /*
- * Re-Enable old Interrupt Mask
- */
- immr->im_siu_conf.sc_simask = simask;
-}
-
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
- void *arg)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- /* SIU interrupt */
- if (irq_vecs[vec].handler != NULL) {
- printf ("SIU interrupt %d 0x%x\n",
- vec,
- (uint) handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
- immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
- printf ("Install SIU interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
-}
-
-void irq_free_handler (int vec)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- /* SIU interrupt */
-#if 0
- printf ("Free CPM interrupt for vector %d\n",
- vec);
-#endif
- immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
-}
-
-/*
- * Timer interrupt - gets called when bit 0 of DEC changes from
- * 0. Decrementer is enabled with bit TBE in TBSCR.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
- printf ("*** Timer Interrupt *** ");
-#endif
- /* Reset Timer Status Bit and Timers Interrupt Status */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
- __asm__ ("nop");
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS | PLPRCR_TMIST;
-
- return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-/*******************************************************************************
- *
- * irqinfo - print information about IRQs
- *
- */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("\nInterrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<NR_IRQS; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
- return 0;
-}
-
-
-#endif
diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c
deleted file mode 100644
index 88c6db8..0000000
--- a/cpu/mpc5xx/serial.c
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: serial.c
- *
- * Discription: Serial interface driver for SCI1 and SCI2.
- * Since this code will be called from ROM use
- * only non-static local variables.
- *
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc5xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Local function prototypes
- */
-
-static int ready_to_send(void);
-
-/*
- * Minimal global serial functions needed to use one of the SCI modules.
- */
-
-int serial_init (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- serial_setbrg();
-
-#if defined(CONFIG_5xx_CONS_SCI1)
- /* 10-Bit, 1 start bit, 8 data bit, no parity, 1 stop bit */
- immr->im_qsmcm.qsmcm_scc1r1 = SCI_M_10;
- immr->im_qsmcm.qsmcm_scc1r1 = SCI_TE | SCI_RE;
-#else
- immr->im_qsmcm.qsmcm_scc2r1 = SCI_M_10;
- immr->im_qsmcm.qsmcm_scc2r1 = SCI_TE | SCI_RE;
-#endif
- return 0;
-}
-
-void serial_putc(const char c)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- /* Test for completition */
- if(ready_to_send()) {
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_sc1dr = (short)c;
-#else
- immr->im_qsmcm.qsmcm_sc2dr = (short)c;
-#endif
- if(c == '\n') {
- if(ready_to_send());
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_sc1dr = (short)'\r';
-#else
- immr->im_qsmcm.qsmcm_sc2dr = (short)'\r';
-#endif
- }
- }
-}
-
-int serial_getc(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile short status;
- unsigned char tmp;
-
- /* New data ? */
- do {
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
- } while ((status & SCI_RDRF) == 0);
-
- /* Read data */
-#if defined(CONFIG_5xx_CONS_SCI1)
- tmp = (unsigned char)(immr->im_qsmcm.qsmcm_sc1dr & SCI_SCXDR_MK);
-#else
- tmp = (unsigned char)( immr->im_qsmcm.qsmcm_sc2dr & SCI_SCXDR_MK);
-#endif
- return tmp;
-}
-
-int serial_tstc()
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- short status;
-
- /* New data character ? */
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
- return (status & SCI_RDRF);
-}
-
-void serial_setbrg (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- short scxbr;
-
- /* Set baudrate */
- scxbr = (gd->cpu_clk / (32 * gd->baudrate));
-#if defined(CONFIG_5xx_CONS_SCI1)
- immr->im_qsmcm.qsmcm_scc1r0 = (scxbr & SCI_SCXBR_MK);
-#else
- immr->im_qsmcm.qsmcm_scc2r0 = (scxbr & SCI_SCXBR_MK);
-#endif
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc(*s);
- ++s;
- }
-}
-
-int ready_to_send(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile short status;
-
- do {
-#if defined(CONFIG_5xx_CONS_SCI1)
- status = immr->im_qsmcm.qsmcm_sc1sr;
-#else
- status = immr->im_qsmcm.qsmcm_sc2sr;
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- reset_5xx_watchdog (immr);
-#endif
- } while ((status & SCI_TDRE) == 0);
- return 1;
-
-}
diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c
deleted file mode 100644
index ea5c1de..0000000
--- a/cpu/mpc5xx/speed.c
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2003
- * Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation,
- */
-
-/*
- * File: speed.c
- *
- * Discription: Provides cpu speed calculation
- *
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Get cpu and bus clock
- */
-int get_clocks (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#ifndef CONFIG_5xx_GCLK_FREQ
- uint divf = (immr->im_clkrst.car_plprcr & PLPRCR_DIVF_MSK);
- uint mf = ((immr->im_clkrst.car_plprcr & PLPRCR_MF_MSK) >> PLPRCR_MF_SHIFT);
- ulong vcoout;
-
- vcoout = (CONFIG_SYS_OSC_CLK / (divf + 1)) * (mf + 1) * 2;
- if(immr->im_clkrst.car_plprcr & PLPRCR_CSRC_MSK) {
- gd->cpu_clk = vcoout / (2^(((immr->im_clkrst.car_sccr & SCCR_DFNL_MSK) >> SCCR_DFNL_SHIFT) + 1));
- } else {
- gd->cpu_clk = vcoout / (2^(immr->im_clkrst.car_sccr & SCCR_DFNH_MSK));
- }
-
-#else /* CONFIG_5xx_GCLK_FREQ */
- gd->bus_clk = CONFIG_5xx_GCLK_FREQ;
-#endif /* CONFIG_5xx_GCLK_FREQ */
-
- if ((immr->im_clkrst.car_sccr & SCCR_EBDF11) == 0) {
- /* No Bus Divider active */
- gd->bus_clk = gd->cpu_clk;
- } else {
- /* CLKOUT is GCLK / 2 */
- gd->bus_clk = gd->cpu_clk / 2;
- }
- return (0);
-}
diff --git a/cpu/mpc5xx/spi.c b/cpu/mpc5xx/spi.c
deleted file mode 100644
index 3ca15ea..0000000
--- a/cpu/mpc5xx/spi.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC5xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- * Ported to MPC5xx
- * Copyright (c) 2003 Denis Peter, MPL AG Switzerland, d.petr@mpl.ch.
- */
-
-#include <common.h>
-#include <mpc5xx.h>
-#include <asm/5xx_immap.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <net.h>
-
-#if defined(CONFIG_SPI)
-
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-
-void spi_init_f (void)
-{
- int i;
-
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
- qsmcm->qsmcm_qsmcr = 0; /* all accesses enabled */
- qsmcm->qsmcm_qspi_il = 0; /* lowest IRQ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PQSPAR[00] = 0 reserved
- * PQSPAR[01] = 1 [0x4000] -> PERI: (SPICS3)
- * PQSPAR[02] = 0 [0x0000] -> GPIO
- * PQSPAR[03] = 0 [0x0000] -> GPIO
- * PQSPAR[04] = 1 [0x0800] -> PERI: (SPICS0)
- * PQSPAR[05] = 0 reseved
- * PQSPAR[06] = 1 [0x0200] -> PERI: (SPIMOSI)
- * PQSPAR[07] = 1 [0x0100] -> PERI: (SPIMISO)
- * -------------------------------------------- */
- qsmcm->qsmcm_pqspar = 0x3 | (CONFIG_SYS_SPI_CS_USED << 3);
-
- /* --------------------------------------------
- * DDRQS[00] = 0 reserved
- * DDRQS[01] = 1 [0x0040] -> SPICS3 Output
- * DDRQS[02] = 0 [0x0000] -> GPIO Output
- * DDRQS[03] = 0 [0x0000] -> GPIO Output
- * DDRQS[04] = 1 [0x0008] -> SPICS0 Output
- * DDRQS[05] = 1 [0x0004] -> SPICLK Output
- * DDRQS[06] = 1 [0x0002] -> SPIMOSI Output
- * DDRQS[07] = 0 [0x0001] -> SPIMISO Input
- * -------------------------------------------- */
- qsmcm->qsmcm_ddrqs = 0x7E;
- /* --------------------------------------------
- * Base state for used SPI CS pins, if base = 0 active must be 1
- * PORTQS[00] = 0 reserved
- * PORTQS[01] = 0 reserved
- * PORTQS[02] = 0 reserved
- * PORTQS[03] = 0 reserved
- * PORTQS[04] = 0 [0x0000] RxD2
- * PORTQS[05] = 1 [0x0400] TxD2
- * PORTQS[06] = 0 [0x0000] RxD1
- * PORTQS[07] = 1 [0x0100] TxD1
- * PORTQS[08] = 0 reserved
- * PORTQS[09] = 0 [0x0000] -> SPICS3 Base Output
- * PORTQS[10] = 0 [0x0000] -> SPICS2 Base Output
- * PORTQS[11] = 0 [0x0000] -> SPICS1 Base Output
- * PORTQS[12] = 0 [0x0000] -> SPICS0 Base Output
- * PORTQS[13] = 0 [0x0004] -> SPICLK Output
- * PORTQS[14] = 0 [0x0002] -> SPIMOSI Output
- * PORTQS[15] = 0 [0x0001] -> SPIMISO Input
- * -------------------------------------------- */
- qsmcm->qsmcm_portqs |= (CONFIG_SYS_SPI_CS_BASE << 3);
- /* --------------------------------------------
- * Controll Register 0
- * SPCR0[00] = 1 (0x8000) Master
- * SPCR0[01] = 0 (0x0000) Wired-Or
- * SPCR0[2..5] = (0x2000) Bits per transfer (default 8)
- * SPCR0[06] = 0 (0x0000) Normal polarity
- * SPCR0[07] = 0 (0x0000) Normal Clock Phase
- * SPCR0[08..15] = 14 1.4MHz
- */
- qsmcm->qsmcm_spcr0=0xA00E;
- /* --------------------------------------------
- * Controll Register 1
- * SPCR1[00] = 0 (0x0000) QSPI enabled
- * SPCR1[1..7] = (0x7F00) Delay before Transfer
- * SPCR1[8..15] = (0x0000) Delay After transfer (204.8usec@40MHz)
- */
- qsmcm->qsmcm_spcr1=0x7F00;
- /* --------------------------------------------
- * Controll Register 2
- * SPCR2[00] = 0 (0x0000) SPI IRQs Disabeld
- * SPCR2[01] = 0 (0x0000) No Wrap around
- * SPCR2[02] = 0 (0x0000) Wrap to 0
- * SPCR2[3..7] = (0x0000) End Queue pointer = 0
- * SPCR2[8..10] = 0 (0x0000) reserved
- * SPCR2[11..15] = 0 (0x0000) NewQueue Address = 0
- */
- qsmcm->qsmcm_spcr2=0x0000;
- /* --------------------------------------------
- * Controll Register 3
- * SPCR3[00..04] = 0 (0x0000) reserved
- * SPCR3[05] = 0 (0x0000) Feedback disabled
- * SPCR3[06] = 0 (0x0000) IRQ on HALTA & MODF disabled
- * SPCR3[07] = 0 (0x0000) Not halted
- */
- qsmcm->qsmcm_spcr3=0x00;
- /* --------------------------------------------
- * SPSR (Controll Register 3) Read only/ reset Flags 08,09,10
- * SPCR3[08] = 1 (0x80) QSPI finished
- * SPCR3[09] = 1 (0x40) Mode Fault Flag
- * SPCR3[10] = 1 (0x20) HALTA
- * SPCR3[11..15] = 0 (0x0000) Last executed command
- */
- qsmcm->qsmcm_spsr=0xE0;
- /*-------------------------------------------
- * Setup RAM
- */
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- * Dummy, all initializations have been done in spi_init_r
- * *********************************************************************** */
-void spi_init_r (void)
-{
- return;
-
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t short_spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i,dlen;
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- qsmcm->qsmcm_tranram[0] = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- i=0;
- qsmcm->qsmcm_tranram[i++] = SPI_EEPROM_WRITE; /* WRITE memory array */
- qsmcm->qsmcm_tranram[i++] = addr[0];
- qsmcm->qsmcm_tranram[i++] = addr[1];
-
- for(dlen=0;dlen<len;dlen++) {
- qsmcm->qsmcm_tranram[i+dlen] = buffer[dlen]; /* WRITE memory array */
- }
- /* transmit it */
- spi_xfer(i+dlen);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- qsmcm->qsmcm_tranram[0] = SPI_EEPROM_RDSR; /* read status */
- qsmcm->qsmcm_tranram[1] = 0;
- spi_xfer(2);
- if (!(qsmcm->qsmcm_recram[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
- return len;
-}
-
-#define TRANSFER_LEN 16
-
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int index,i,newlen;
- uchar newaddr[2];
- int curraddr;
-
- curraddr=(addr[alen-2]<<8)+addr[alen-1];
- i=len;
- index=0;
- do {
- newaddr[1]=(curraddr & 0xff);
- newaddr[0]=((curraddr>>8) & 0xff);
- if(i>TRANSFER_LEN) {
- newlen=TRANSFER_LEN;
- i-=TRANSFER_LEN;
- }
- else {
- newlen=i;
- i=0;
- }
- short_spi_write (newaddr, 2, &buffer[index], newlen);
- index+=newlen;
- curraddr+=newlen;
- }while(i);
- return (len);
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t short_spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
-
- for(i=0;i<32;i++) {
- qsmcm->qsmcm_recram[i]=0x0000;
- qsmcm->qsmcm_tranram[i]=0x0000;
- qsmcm->qsmcm_comdram[i]=0x00;
- }
- i=0;
- qsmcm->qsmcm_tranram[i++] = (SPI_EEPROM_READ); /* READ memory array */
- qsmcm->qsmcm_tranram[i++] = addr[0] & 0xff;
- qsmcm->qsmcm_tranram[i++] = addr[1] & 0xff;
- spi_xfer(3 + len);
- for(i=0;i<len;i++) {
- *buffer++=(char)qsmcm->qsmcm_recram[i+3];
- }
- return len;
-}
-
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- int index,i,newlen;
- uchar newaddr[2];
- int curraddr;
-
- curraddr=(addr[alen-2]<<8)+addr[alen-1];
- i=len;
- index=0;
- do {
- newaddr[1]=(curraddr & 0xff);
- newaddr[0]=((curraddr>>8) & 0xff);
- if(i>TRANSFER_LEN) {
- newlen=TRANSFER_LEN;
- i-=TRANSFER_LEN;
- }
- else {
- newlen=i;
- i=0;
- }
- short_spi_read (newaddr, 2, &buffer[index], newlen);
- index+=newlen;
- curraddr+=newlen;
- }while(i);
- return (len);
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile qsmcm5xx_t *qsmcm;
- int i;
- int tm;
- ushort status;
- immr = (immap_t *) CONFIG_SYS_IMMR;
- qsmcm = (qsmcm5xx_t *)&immr->im_qsmcm;
- DPRINT (("*** spi_xfer entered count %d***\n",count));
-
- /* Set CS for device */
- for(i=0;i<(count-1);i++)
- qsmcm->qsmcm_comdram[i] = 0x80 | CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
-
- qsmcm->qsmcm_comdram[i] = CONFIG_SYS_SPI_CS_ACT; /* CS3 is connected to the SPI EEPROM */
- qsmcm->qsmcm_spcr2=((count-1)&0x1F)<<8;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n", count));
-
- qsmcm->qsmcm_spsr=0xE0; /* clear all flags */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- qsmcm->qsmcm_spcr1 |= 0x8000; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- status=qsmcm->qsmcm_spcr1;
- if((status & 0x8000)==0)
- break;
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_tranram, 32); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_recram, 32); /* dump of rxbuf after transmit */
- printf ("\nspi_xfer: commbuf after xfer\n");
- memdump ((void *) qsmcm->qsmcm_comdram, 32); /* dump of txbuf before transmit */
- printf ("\n");
-#endif
-
- return count;
-}
-
-#endif /* CONFIG_SPI */
diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
deleted file mode 100644
index 0af879e..0000000
--- a/cpu/mpc5xx/start.S
+++ /dev/null
@@ -1,576 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001, 2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * File: start.S
- *
- * Discription: startup code
- *
- */
-
-#include <config.h>
-#include <mpc5xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_5xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <linux/config.h>
-#include <asm/processor.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't have a MMU.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- mfspr r3, 638
- li r4, CONFIG_SYS_ISB /* Set ISB bit */
- or r3, r3, r4
- mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x20
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize debug port registers */
- /*----------------------------------------------------------------------*/
- xor r0, r0, r0 /* Clear R0 */
- mtspr LCTRL1, r0 /* Initialize debug port regs */
- mtspr LCTRL2, r0
- mtspr COUNTA, r0
- mtspr COUNTB, r0
-
-#if defined(CONFIG_PATI)
- /* the external flash access on PATI fails if programming the PLL to 40MHz.
- * Copy the PLL programming code to the internal RAM and execute it
- *----------------------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, pll_prog_code_start - _start + EXC_OFF_SYS_RESET
-
- lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
- mtlr r4
- addis r5,0,0x0
- ori r5,r5,((pll_prog_code_end - pll_prog_code_start) >>2)
- mtctr r5
- addi r3, r3, -4
- addi r4, r4, -4
-0:
- lwzu r0,4(r3)
- stwu r0,4(r4)
- bdnz 0b /* copy loop */
- blrl
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-
- /* Initialize some SPRs that are hard to access from C */
- /*----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* Pass IMMR as arg1 to C routine */
- lis r2, CONFIG_SYS_INIT_SP_ADDR@h
- ori r1, r2, CONFIG_SYS_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */
- /* Note: R0 is still 0 here */
- stwu r0, -4(r1) /* Clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /*
- * Disable serialized ifetch and show cycles
- * (i.e. set processor to normal mode) for maximum
- * performance.
- */
-
- li r2, 0x0007
- mtspr ICTRL, r2
-
- /* Set up debug mode entry */
-
- lis r2, CONFIG_SYS_DER@h
- ori r2, r2, CONFIG_SYS_DER@l
- mtspr DER, r2
-
- /* Let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* FPU on MPC5xx available. We will use it later.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
- .globl get_immr
-get_immr:
- mr r4,r3 /* save mask */
- mfspr r3, IMMR /* IMMR */
- cmpwi 0,r4,0 /* mask != 0 ? */
- beq 4f
- and r3,r3,r4 /* IMMR & mask */
-4:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer in SRAM */
- mr r9, r4 /* Save copy of global data pointer in SRAM */
- mr r10, r5 /* Save copy of monitor destination Address in SRAM */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 4f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-4: sync
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_PATI)
-/* Program the PLL */
-pll_prog_code_start:
- lis r4, (CONFIG_SYS_IMMR + 0x002fc384)@h
- ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc384)@l
- lis r3, (0x55ccaa33)@h
- ori r3, r3, (0x55ccaa33)@l
- stw r3, 0(r4)
- lis r4, (CONFIG_SYS_IMMR + 0x002fc284)@h
- ori r4, r4, (CONFIG_SYS_IMMR + 0x002fc284)@l
- lis r3, CONFIG_SYS_PLPRCR@h
- ori r3, r3, CONFIG_SYS_PLPRCR@l
- stw r3, 0(r4)
- addis r3,0,0x0
- ori r3,r3,0xA000
- mtctr r3
-..spinlp:
- bdnz ..spinlp /* spin loop */
- blr
-pll_prog_code_end:
- nop
- blr
-#endif
diff --git a/cpu/mpc5xx/traps.c b/cpu/mpc5xx/traps.c
deleted file mode 100644
index 6882c21..0000000
--- a/cpu/mpc5xx/traps.c
+++ /dev/null
@@ -1,227 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x0001000
-
-
-/*
- * Print stack backtrace
- */
-void print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-/*
- * Print current registers
- */
-void show_regs(struct pt_regs * regs)
-{
- int i;
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-/*
- * General exception handler routine
- */
-void _exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-/*
- * Machine check exception handler routine
- */
-void MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-/*
- * Alignment exception handler routine
- */
-void AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-/*
- * Program check exception handler routine
- */
-void ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-/*
- * Software emulation exception handler routine
- */
-void SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-/*
- * Unknown exception handler routine
- */
-void UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/*
- * Debug exception handler routine
- */
-void DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
diff --git a/cpu/mpc5xx/u-boot.lds b/cpu/mpc5xx/u-boot.lds
deleted file mode 100644
index deeb06a..0000000
--- a/cpu/mpc5xx/u-boot.lds
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * (C) Copyright 2001 Wolfgang Denk, DENX Software Engineering, wd@denx.de
- * (C) Copyright 2003 Martin Winistoerfer, martinwinistoerfer@gmx.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc5xx/start.o (.text)
-
- *(.text)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
-
- _end = . ;
- PROVIDE (end = .);
-/* . = env_start;
- .ppcenv :
- {
- common/env_embedded.o (.ppcenv)
- }
-*/
-}
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
deleted file mode 100644
index 0ee0611..0000000
--- a/cpu/mpc5xxx/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = io.o firmware_sc_task_bestcomm.impl.o
-COBJS = i2c.o traps.o cpu.o cpu_init.o ide.o interrupts.o \
- loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc5xxx/config.mk b/cpu/mpc5xxx/config.mk
deleted file mode 100644
index 5e82f67..0000000
--- a/cpu/mpc5xxx/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC5xxx -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc5xxx/u-boot.lds
diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c
deleted file mode 100644
index b20234d..0000000
--- a/cpu/mpc5xxx/cpu.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC5xxx CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <net.h>
-#include <mpc5xxx.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-#if defined(CONFIG_OF_IDE_FIXUP)
-#include <ide.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- char buf[32];
- uint svr, pvr;
-
- puts ("CPU: ");
-
- svr = get_svr();
- pvr = get_pvr();
-
- switch (pvr) {
- case PVR_5200:
- printf("MPC5200");
- break;
- case PVR_5200B:
- printf("MPC5200B");
- break;
- default:
- printf("Unknown MPC5xxx");
- break;
- }
-
- printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr),
- PVR_MAJ(pvr), PVR_MIN(pvr));
- printf (" at %s MHz\n", strmhz (buf, clock));
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* Charge the watchdog timer */
- *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0x0001000f;
- *(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */
- while(1);
-
- return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4;
- char * cpu_path = "/cpus/" OF_CPU;
-#ifdef CONFIG_MPC5xxx_FEC
- uchar enetaddr[6];
- char * eth_path = "/" OF_SOC "/ethernet@3000";
-#endif
-
- do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1);
- do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency",
- bd->bi_busfreq*div, 1);
-#ifdef CONFIG_MPC5xxx_FEC
- eth_getenv_enetaddr("ethaddr", enetaddr);
- do_fixup_by_path(blob, eth_path, "mac-address", enetaddr, 6, 0);
- do_fixup_by_path(blob, eth_path, "local-mac-address", enetaddr, 6, 0);
-#endif
-#if defined(CONFIG_OF_IDE_FIXUP)
- if (!ide_device_present(0)) {
- /* NO CF card detected -> delete ata node in DTS */
- int nodeoffset = 0;
- char nodename[] = "/soc5200@f0000000/ata@3a00";
-
- nodeoffset = fdt_path_offset(blob, nodename);
- if (nodeoffset >= 0) {
- fdt_del_node(blob, nodeoffset);
- } else {
- printf("%s: cannot find %s node err:%s\n",
- __func__, nodename, fdt_strerror(nodeoffset));
- }
- }
-
-#endif
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
-
- *save_addr = (BOOTCOUNT_MAGIC & 0xffff0000) | a;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr = (volatile ulong *) (MPC5XXX_CDM_BRDCRMB);
-
- if ((*save_addr & 0xffff0000) != (BOOTCOUNT_MAGIC & 0xffff0000))
- return 0;
- else
- return (*save_addr & 0x0000ffff);
-}
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
-
-#ifdef CONFIG_MPC5xxx_FEC
-/* Default initializations for FEC controllers. To override,
- * create a board-specific function called:
- * int board_eth_init(bd_t *bis)
- */
-
-int cpu_eth_init(bd_t *bis)
-{
- return mpc5xxx_fec_initialize(bis);
-}
-#endif
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_5xxx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void reset_5xxx_watchdog(void)
-{
- volatile struct mpc5xxx_gpt *gpt0 =
- (struct mpc5xxx_gpt *) MPC5XXX_GPT;
-
- /* Trigger TIMER_0 by writing A5 to OCPW */
- clrsetbits_be32(&gpt0->emsr, 0xff000000, 0xa5000000);
-}
-#endif /* CONFIG_WATCHDOG */
diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c
deleted file mode 100644
index 9daf375..0000000
--- a/cpu/mpc5xxx/cpu_init.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
- volatile struct mpc5xxx_mmap_ctl *mm =
- (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR;
- volatile struct mpc5xxx_lpb *lpb =
- (struct mpc5xxx_lpb *) MPC5XXX_LPB;
- volatile struct mpc5xxx_gpio *gpio =
- (struct mpc5xxx_gpio *) MPC5XXX_GPIO;
- volatile struct mpc5xxx_xlb *xlb =
- (struct mpc5xxx_xlb *) MPC5XXX_XLBARB;
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
- volatile struct mpc5xxx_cdm *cdm =
- (struct mpc5xxx_cdm *) MPC5XXX_CDM;
-#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
-#if defined(CONFIG_WATCHDOG)
- volatile struct mpc5xxx_gpt *gpt0 =
- (struct mpc5xxx_gpt *) MPC5XXX_GPT;
-#endif /* CONFIG_WATCHDOG */
- unsigned long addecr = (1 << 25); /* Boot_CS */
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /*
- * Memory Controller: configure chip selects and enable them
- */
-#if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE)
- out_be32(&mm->boot_start, START_REG(CONFIG_SYS_BOOTCS_START));
- out_be32(&mm->boot_stop, STOP_REG(CONFIG_SYS_BOOTCS_START,
- CONFIG_SYS_BOOTCS_SIZE));
-#endif
-#if defined(CONFIG_SYS_BOOTCS_CFG)
- out_be32(&lpb->cs0_cfg, CONFIG_SYS_BOOTCS_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE)
- out_be32(&mm->cs0_start, START_REG(CONFIG_SYS_CS0_START));
- out_be32(&mm->cs0_stop, STOP_REG(CONFIG_SYS_CS0_START,
- CONFIG_SYS_CS0_SIZE));
- /* CS0 and BOOT_CS cannot be enabled at once. */
- /* addecr |= (1 << 16); */
-#endif
-#if defined(CONFIG_SYS_CS0_CFG)
- out_be32(&lpb->cs0_cfg, CONFIG_SYS_CS0_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE)
- out_be32(&mm->cs1_start, START_REG(CONFIG_SYS_CS1_START));
- out_be32(&mm->cs1_stop, STOP_REG(CONFIG_SYS_CS1_START,
- CONFIG_SYS_CS1_SIZE));
- addecr |= (1 << 17);
-#endif
-#if defined(CONFIG_SYS_CS1_CFG)
- out_be32(&lpb->cs1_cfg, CONFIG_SYS_CS1_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE)
- out_be32(&mm->cs2_start, START_REG(CONFIG_SYS_CS2_START));
- out_be32(&mm->cs2_stop, STOP_REG(CONFIG_SYS_CS2_START,
- CONFIG_SYS_CS2_SIZE));
- addecr |= (1 << 18);
-#endif
-#if defined(CONFIG_SYS_CS2_CFG)
- out_be32(&lpb->cs2_cfg, CONFIG_SYS_CS2_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE)
- out_be32(&mm->cs3_start, START_REG(CONFIG_SYS_CS3_START));
- out_be32(&mm->cs3_stop, STOP_REG(CONFIG_SYS_CS3_START,
- CONFIG_SYS_CS3_SIZE));
- addecr |= (1 << 19);
-#endif
-#if defined(CONFIG_SYS_CS3_CFG)
- out_be32(&lpb->cs3_cfg, CONFIG_SYS_CS3_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE)
- out_be32(&mm->cs4_start, START_REG(CONFIG_SYS_CS4_START));
- out_be32(&mm->cs4_stop, STOP_REG(CONFIG_SYS_CS4_START,
- CONFIG_SYS_CS4_SIZE));
- addecr |= (1 << 20);
-#endif
-#if defined(CONFIG_SYS_CS4_CFG)
- out_be32(&lpb->cs4_cfg, CONFIG_SYS_CS4_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE)
- out_be32(&mm->cs5_start, START_REG(CONFIG_SYS_CS5_START));
- out_be32(&mm->cs5_stop, STOP_REG(CONFIG_SYS_CS5_START,
- CONFIG_SYS_CS5_SIZE));
- addecr |= (1 << 21);
-#endif
-#if defined(CONFIG_SYS_CS5_CFG)
- out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG);
-#endif
-
- addecr |= 1;
-#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE)
- out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START));
- out_be32(&mm->cs6_stop, STOP_REG(CONFIG_SYS_CS6_START,
- CONFIG_SYS_CS6_SIZE));
- addecr |= (1 << 26);
-#endif
-#if defined(CONFIG_SYS_CS6_CFG)
- out_be32(&lpb->cs6_cfg, CONFIG_SYS_CS6_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE)
- out_be32(&mm->cs7_start, START_REG(CONFIG_SYS_CS7_START));
- out_be32(&mm->cs7_stop, STOP_REG(CONFIG_SYS_CS7_START,
- CONFIG_SYS_CS7_SIZE));
- addecr |= (1 << 27);
-#endif
-#if defined(CONFIG_SYS_CS7_CFG)
- out_be32(&lpb->cs7_cfg, CONFIG_SYS_CS7_CFG);
-#endif
-
-#if defined(CONFIG_SYS_CS_BURST)
- out_be32(&lpb->cs_burst, CONFIG_SYS_CS_BURST);
-#endif
-#if defined(CONFIG_SYS_CS_DEADCYCLE)
- out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE);
-#endif
-
- /* Enable chip selects */
- out_be32(&mm->ipbi_ws_ctrl, addecr);
- out_be32(&lpb->cs_ctrl, (1 << 24));
-
- /* Setup pin multiplexing */
-#if defined(CONFIG_SYS_GPS_PORT_CONFIG)
- out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG);
-#endif
-
- /* enable timebase */
- setbits_be32(&xlb->config, (1 << 13));
-
- /* Enable snooping for RAM */
- setbits_be32(&xlb->config, (1 << 15));
- out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d);
-
-#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
- /* Motorola reports IPB should better run at 133 MHz. */
- setbits_be32(&mm->ipbi_ws_ctrl, 1);
- /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */
- addecr = in_be32(&cdm->cfg);
- addecr &= ~0x103;
-# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2)
- /* pci_clk_sel = 0x01 -> IPB_CLK/2 */
- addecr |= 0x01;
-# else
- /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */
- addecr |= 0x02;
-# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */
- out_be32(&cdm->cfg, addecr);
-#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */
- /* Configure the XLB Arbiter */
- out_be32(&xlb->master_pri_enable, 0xff);
- out_be32(&xlb->master_priority, 0x11111111);
-
-#if defined(CONFIG_SYS_XLB_PIPELINING)
- /* Enable piplining */
- clrbits_be32(&xlb->config, (1 << 31));
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- /* Charge the watchdog timer - prescaler = 64k, count = 64k*/
- out_be32(&gpt0->cir, 0x0000ffff);
- out_be32(&gpt0->emsr, 0x9004); /* wden|ce|timer_ms */
-
- reset_5xxx_watchdog();
-#endif /* CONFIG_WATCHDOG */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- volatile struct mpc5xxx_intr *intr =
- (struct mpc5xxx_intr *) MPC5XXX_ICTL;
-
- /* mask all interrupts */
- out_be32(&intr->per_mask, 0xffffff00);
- setbits_be32(&intr->main_mask, 0x0001ffff);
- clrbits_be32(&intr->ctrl, 0x00000f00);
- /* route critical ints to normal ints */
- setbits_be32(&intr->ctrl, 0x00000001);
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC5xxx_FEC)
- /* load FEC microcode */
- loadtask(0, 2);
-#endif
-
- return (0);
-}
diff --git a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
deleted file mode 100644
index 00c2312..0000000
--- a/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S
+++ /dev/null
@@ -1,359 +0,0 @@
-/*
- * Copyright (C) 2001, Software Center, Motorola China.
- *
- * This file contains microcode for the FEC controller of the MPC5200 CPU.
- */
-
-#include <config.h>
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.align 9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x000000a4
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long CONFIG_SYS_MBAR
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000d0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long CONFIG_SYS_MBAR
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010cf04c /* 0020: DRD2B1: var4 = EU3(); EU3(var1,var12) */
-.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf04e /* 0030: DRD2B1: var6 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020cf04f /* 0038: DRD2B1: var8 = EU3(); EU3(var1,var15) */
-.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */
-.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */
-.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */
-.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */
-.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */
-.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */
-.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */
-.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */
-.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */
-.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */
-.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04c /* 00A0: DRD2B1: idx0 = EU3(); EU3(var1,var12) */
-.long 0x000001f8 /* 00A4(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80024800 /* 0000: LCDEXT: idx0 = 0xf0008800; ; */
-.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024cf04d /* 0020: DRD2B1: var9 = EU3(); EU3(var1,var13) */
-.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010cf04e /* 0034: DRD2B1: var4 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014cf04f /* 003C: DRD2B1: var5 = EU3(); EU3(var1,var15) */
-.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028cf050 /* 0044: DRD2B1: var10 = EU3(); EU3(var1,var16) */
-.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf051 /* 004C: DRD2B1: var6 = EU3(); EU3(var1,var17) */
-.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01ccf0a1 /* 0058: DRD2B1: var7 = EU3(); EU3(var2,idx1) */
-.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */
-.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */
-.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */
-.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */
-.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000001 /* 0088: DRD2A: EU0=0 EU1=0 EU2=0 EU3=1 EXT init=0 WS=0 RS=0 */
-.long 0x0c4cfc4d /* 008C: DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
-.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04d /* 00CC: DRD2B1: idx0 = EU3(); EU3(var1,var13) */
-.long 0x000001f8 /* 00D0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long (CONFIG_SYS_MBAR + 0x8800) /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x000005e4 /* var[16] */
-.long 0x0000000e /* var[17] */
-.long 0x000005e0 /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000001 /* inc[2] */
-.long 0x80000000 /* inc[3] */
-.long 0x40000000 /* inc[4] */
-.long 0x00000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long (CONFIG_SYS_MBAR + 0x8800) /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000008 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0x4000ffff /* inc[3] */
-.long 0xe0000001 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 128, 0x0
diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c
deleted file mode 100644
index 4f7f716..0000000
--- a/cpu/mpc5xxx/i2c.c
+++ /dev/null
@@ -1,442 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc5xxx.h>
-#include <i2c.h>
-
-#if (CONFIG_SYS_I2C_MODULE == 2)
-#define I2C_BASE MPC5XXX_I2C2
-#elif (CONFIG_SYS_I2C_MODULE == 1)
-#define I2C_BASE MPC5XXX_I2C1
-#else
-#error CONFIG_SYS_I2C_MODULE is not properly configured
-#endif
-
-#define I2C_TIMEOUT 6667
-#define I2C_RETRIES 3
-
-struct mpc5xxx_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 *reg);
-static void mpc_reg_out (volatile u32 *reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in(volatile u32 *reg)
-{
- int ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out(volatile u32 *reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in(reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in(&regs->msr);
-
- while (timeout-- && (status & I2C_BB)) {
-#if 1
- volatile int temp;
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- temp = mpc_reg_in(&regs->mdr);
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- mpc_reg_out(&regs->mcr, 0, 0);
- mpc_reg_out(&regs->mcr, I2C_EN, 0);
-#endif
- udelay(15);
- status = mpc_reg_in(&regs->msr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin(int *status)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in(&regs->msr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay(15);
- *status = mpc_reg_in(&regs->msr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out(&regs->msr, 0, I2C_IF);
-
- return 0;
-}
-
-static int do_address(uchar chip, char rdwr_flag)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag) {
- chip |= 1;
- }
-
- mpc_reg_out(&regs->mcr, I2C_TX, I2C_TX);
- mpc_reg_out(&regs->mdr, chip, 0);
-
- if (wait_for_pin(&status)) {
- return -2;
- }
-
- if (status & I2C_RXAK) {
- return -3;
- }
-
- return 0;
-}
-
-static int send_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out(&regs->mdr, buf[wrcount], 0);
-
- if (wait_for_pin(&status)) {
- break;
- }
-
- if (status & I2C_RXAK) {
- break;
- }
-
- }
-
- return !(wrcount == len);
-}
-
-static int receive_bytes(uchar chip, char *buf, int len)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out(&regs->mcr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in(&regs->mdr);
-
- if (dummy) {
- dummy = 0;
- } else {
- rdcount++;
- }
-
-
- if (wait_for_pin(&status)) {
- return -4;
- }
- }
-
- mpc_reg_out(&regs->mcr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in(&regs->mdr);
-
- if (wait_for_pin(&status)) {
- return -5;
- }
-
- mpc_reg_out(&regs->mcr, 0, I2C_TXAK);
-
- return 0;
-}
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
-
-#define FDR510(x) (u8) (((x & 0x20) >> 3) | (x & 0x3))
-#define FDR432(x) (u8) ((x & 0x1C) >> 2)
-/*
- * Reset any i2c devices that may have been interrupted during a system reset.
- * Normally this would be accomplished by clocking the line until SCL and SDA
- * are released and then sending a start condtiion (From an Atmel datasheet).
- * There is no direct access to the i2c pins so instead create start commands
- * through the i2c interface. Send a start command then delay for the SDA Hold
- * time, repeat this by disabling/enabling the bus a total of 9 times.
- */
-static void send_reset(void)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
- u32 delay;
- u8 fdr;
- int SDA_Tap[] = { 3, 3, 4, 4, 1, 1, 2, 2};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- fdr = (u8)mpc_reg_in(&regs->mfdr);
-
- delay = scltap[FDR432(fdr)].scl2tap + ((SDA_Tap[FDR510(fdr)] - 1) * \
- scltap[FDR432(fdr)].tap2tap) + 3;
-
- for (i = 0; i < 9; i++) {
- mpc_reg_out(&regs->mcr, I2C_EN|I2C_STA|I2C_TX, I2C_INIT_MASK);
- udelay(delay);
- mpc_reg_out(&regs->mcr, 0, I2C_INIT_MASK);
- udelay(delay);
- }
-
- mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
-}
-#endif /* CONFIG_SYS_I2c_INIT_MPC5XXX */
-
-/**************** I2C API ****************/
-
-void i2c_init(int speed, int saddr)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
-
- mpc_reg_out(&regs->mcr, 0, 0);
- mpc_reg_out(&regs->madr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out(&regs->mfdr, mpc_get_fdr(speed), 0);
-
- /* Enable module
- */
- mpc_reg_out(&regs->mcr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out(&regs->msr, 0, I2C_IF);
-
-#if defined(CONFIG_SYS_I2C_INIT_MPC5XXX)
- send_reset();
-#endif
- return;
-}
-
-static int mpc_get_fdr(int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8};
- struct mpc5xxx_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->ipb_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] - 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed*scl) {
- if ((speed*scl - ipb) < bestmatch) {
- bestmatch = speed*scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb/scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- if (gd->have_console)
- printf("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe(uchar chip)
-{
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
-
- if (! do_address(chip, 0)) {
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- udelay(500);
- break;
- }
-
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- udelay(500);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c * regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
- if (do_address(chip, 1)) {
- if (gd->have_console)
- printf("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
-{
- char xaddr[4];
- struct mpc5xxx_i2c *regs = (struct mpc5xxx_i2c *)I2C_BASE;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb()) {
- if (gd->have_console)
- printf("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
- if (do_address(chip, 0)) {
- if (gd->have_console)
- printf("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes(chip, &xaddr[4-alen], alen)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes(chip, (char *)buf, len)) {
- if (gd->have_console)
- printf("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
-Done:
- mpc_reg_out(&regs->mcr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c
deleted file mode 100644
index d337abb..0000000
--- a/cpu/mpc5xxx/ide.c
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * (C) Copyright 2004
- * Pierre AUBERT, Staubli Faverges, <p.aubert@staubli.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Init is derived from Linux code.
- */
-#include <common.h>
-
-#if defined(CONFIG_CMD_IDE)
-#include <mpc5xxx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define CALC_TIMING(t) (t + period - 1) / period
-
-#ifdef CONFIG_IDE_RESET
-extern void init_ide_reset (void);
-#endif
-
-int ide_preinit (void)
-{
- long period, t0, t1, t2_8, t2_16, t4, ta;
- vu_long reg;
- struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
-
- reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG;
-#if defined(CONFIG_SYS_ATA_CS_ON_I2C2)
- /* ATA cs0/1 on i2c2 clk/io */
- reg = (reg & ~0x03000000ul) | 0x02000000ul;
-#elif defined(CONFIG_SYS_ATA_CS_ON_TIMER01)
- /* ATA cs0/1 on Timer 0/1 */
- reg = (reg & ~0x03000000ul) | 0x03000000ul;
-#else
- /* ATA cs0/1 on Local Plus cs4/5 */
- reg = (reg & ~0x03000000ul) | 0x01000000ul;
-#endif /* CONFIG_TOTAL5200 */
- *(vu_long *) MPC5XXX_GPS_PORT_CONFIG = reg;
-
- /* All sample codes do that... */
- *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0;
-
-#if defined(CONFIG_UC101)
- /* Configure and reset host */
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG =
- MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
- udelay (10);
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = 0;
-#else
- /* Configure and reset host */
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY |
- MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR;
- udelay (10);
- *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY;
-#endif
-
- /* Disable prefetch on Commbus */
- psdma->PtdCntrl |= 1;
-
- /* Init timings : we use PIO mode 0 timings */
- period = 1000000000 / gd->ipb_clk; /* period in ns */
-
- t0 = CALC_TIMING (600);
- t2_8 = CALC_TIMING (290);
- t2_16 = CALC_TIMING (165);
- reg = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8);
- *(vu_long *) MPC5XXX_ATA_PIO1 = reg;
-
- t4 = CALC_TIMING (30);
- t1 = CALC_TIMING (70);
- ta = CALC_TIMING (35);
- reg = (t4 << 24) | (t1 << 16) | (ta << 8);
-
- *(vu_long *) MPC5XXX_ATA_PIO2 = reg;
-
-#ifdef CONFIG_IDE_RESET
- init_ide_reset ();
-#endif /* CONFIG_IDE_RESET */
-
- return (0);
-}
-#endif
diff --git a/cpu/mpc5xxx/interrupts.c b/cpu/mpc5xxx/interrupts.c
deleted file mode 100644
index 6035771..0000000
--- a/cpu/mpc5xxx/interrupts.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * (C) Copyright 2006
- * Detlev Zundel, DENX Software Engineering, dzu@denx.de
- *
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* this section was ripped out of arch/ppc/syslib/mpc52xx_pic.c in the
- * Linux 2.6 source with the following copyright.
- *
- * Based on (well, mostly copied from) the code from the 2.4 kernel by
- * Dale Farnsworth <dfarnsworth@mvista.com> and Kent Borg.
- *
- * Copyright (C) 2004 Sylvain Munaut <tnt@246tNt.com>
- * Copyright (C) 2003 Montavista Software, Inc
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS];
-
-static struct mpc5xxx_intr *intr;
-static struct mpc5xxx_sdma *sdma;
-
-static void mpc5xxx_ic_disable(unsigned int irq)
-{
- u32 val;
-
- if (irq == MPC5XXX_IRQ0) {
- val = in_be32(&intr->ctrl);
- val &= ~(1 << 11);
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_IRQ1) {
- BUG();
- } else if (irq <= MPC5XXX_IRQ3) {
- val = in_be32(&intr->ctrl);
- val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1)));
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
- val = in_be32(&intr->main_mask);
- val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE));
- out_be32(&intr->main_mask, val);
- } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
- val = in_be32(&sdma->IntMask);
- val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE);
- out_be32(&sdma->IntMask, val);
- } else {
- val = in_be32(&intr->per_mask);
- val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE));
- out_be32(&intr->per_mask, val);
- }
-}
-
-static void mpc5xxx_ic_enable(unsigned int irq)
-{
- u32 val;
-
- if (irq == MPC5XXX_IRQ0) {
- val = in_be32(&intr->ctrl);
- val |= 1 << 11;
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_IRQ1) {
- BUG();
- } else if (irq <= MPC5XXX_IRQ3) {
- val = in_be32(&intr->ctrl);
- val |= 1 << (10 - (irq - MPC5XXX_IRQ1));
- out_be32(&intr->ctrl, val);
- } else if (irq < MPC5XXX_SDMA_IRQ_BASE) {
- val = in_be32(&intr->main_mask);
- val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)));
- out_be32(&intr->main_mask, val);
- } else if (irq < MPC5XXX_PERP_IRQ_BASE) {
- val = in_be32(&sdma->IntMask);
- val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
- out_be32(&sdma->IntMask, val);
- } else {
- val = in_be32(&intr->per_mask);
- val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)));
- out_be32(&intr->per_mask, val);
- }
-}
-
-static void mpc5xxx_ic_ack(unsigned int irq)
-{
- u32 val;
-
- /*
- * Only some irqs are reset here, others in interrupting hardware.
- */
-
- switch (irq) {
- case MPC5XXX_IRQ0:
- val = in_be32(&intr->ctrl);
- val |= 0x08000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_CCS_IRQ:
- val = in_be32(&intr->enc_status);
- val |= 0x00000400;
- out_be32(&intr->enc_status, val);
- break;
- case MPC5XXX_IRQ1:
- val = in_be32(&intr->ctrl);
- val |= 0x04000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_IRQ2:
- val = in_be32(&intr->ctrl);
- val |= 0x02000000;
- out_be32(&intr->ctrl, val);
- break;
- case MPC5XXX_IRQ3:
- val = in_be32(&intr->ctrl);
- val |= 0x01000000;
- out_be32(&intr->ctrl, val);
- break;
- default:
- if (irq >= MPC5XXX_SDMA_IRQ_BASE
- && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) {
- out_be32(&sdma->IntPend,
- 1 << (irq - MPC5XXX_SDMA_IRQ_BASE));
- }
- break;
- }
-}
-
-static void mpc5xxx_ic_disable_and_ack(unsigned int irq)
-{
- mpc5xxx_ic_disable(irq);
- mpc5xxx_ic_ack(irq);
-}
-
-static void mpc5xxx_ic_end(unsigned int irq)
-{
- mpc5xxx_ic_enable(irq);
-}
-
-void mpc5xxx_init_irq(void)
-{
- u32 intr_ctrl;
-
- /* Remap the necessary zones */
- intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
- sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA);
-
- /* Disable all interrupt sources. */
- out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */
- out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */
- out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */
- out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */
- intr_ctrl = in_be32(&intr->ctrl);
- intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */
- 0x00ff0000 | /* IRQ 0-3 level sensitive low active */
- 0x00001000 | /* MEE master external enable */
- 0x00000000 | /* 0 means disable IRQ 0-3 */
- 0x00000001; /* CEb route critical normally */
- out_be32(&intr->ctrl, intr_ctrl);
-
- /* Zero a bunch of the priority settings. */
- out_be32(&intr->per_pri1, 0);
- out_be32(&intr->per_pri2, 0);
- out_be32(&intr->per_pri3, 0);
- out_be32(&intr->main_pri1, 0);
- out_be32(&intr->main_pri2, 0);
-}
-
-int mpc5xxx_get_irq(struct pt_regs *regs)
-{
- u32 status;
- int irq = -1;
-
- status = in_be32(&intr->enc_status);
-
- if (status & 0x00000400) { /* critical */
- irq = (status >> 8) & 0x3;
- if (irq == 2) /* high priority peripheral */
- goto peripheral;
- irq += MPC5XXX_CRIT_IRQ_BASE;
- } else if (status & 0x00200000) { /* main */
- irq = (status >> 16) & 0x1f;
- if (irq == 4) /* low priority peripheral */
- goto peripheral;
- irq += MPC5XXX_MAIN_IRQ_BASE;
- } else if (status & 0x20000000) { /* peripheral */
- peripheral:
- irq = (status >> 24) & 0x1f;
- if (irq == 0) { /* bestcomm */
- status = in_be32(&sdma->IntPend);
- irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1;
- } else
- irq += MPC5XXX_PERP_IRQ_BASE;
- }
-
- return irq;
-}
-
-/****************************************************************************/
-
-int interrupt_init_cpu(ulong * decrementer_count)
-{
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- mpc5xxx_init_irq();
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- int irq, unmask = 1;
-
- irq = mpc5xxx_get_irq(regs);
-
- mpc5xxx_ic_disable_and_ack(irq);
-
- enable_interrupts();
-
- if (irq_handlers[irq].handler != NULL)
- (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
- else {
- printf("\nBogus External Interrupt IRQ %d\n", irq);
- /*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
- unmask = 0;
- }
-
- if (unmask)
- mpc5xxx_ic_end(irq);
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- mpc5xxx_ic_enable(irq);
-}
-
-void irq_free_handler(int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- mpc5xxx_ic_disable(irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- int irq, re_enable;
- u32 intr_ctrl;
- char *irq_config[] = { "level sensitive, active high",
- "edge sensitive, rising active edge",
- "edge sensitive, falling active edge",
- "level sensitive, active low"
- };
-
- re_enable = disable_interrupts();
-
- intr_ctrl = in_be32(&intr->ctrl);
- printf("Interrupt configuration:\n");
-
- for (irq = 0; irq <= 3; irq++) {
- printf("IRQ%d: %s\n", irq,
- irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]);
- }
-
- puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < NR_IRQS; irq++)
- if (irq_handlers[irq].handler != NULL)
- printf("%02d %08lx %08lx %ld\n", irq,
- (ulong) irq_handlers[irq].handler,
- (ulong) irq_handlers[irq].arg,
- irq_handlers[irq].count);
-
- if (re_enable)
- enable_interrupts();
-}
-#endif
diff --git a/cpu/mpc5xxx/io.S b/cpu/mpc5xxx/io.S
deleted file mode 100644
index 2178a26..0000000
--- a/cpu/mpc5xxx/io.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
diff --git a/cpu/mpc5xxx/loadtask.c b/cpu/mpc5xxx/loadtask.c
deleted file mode 100644
index 47e7b59..0000000
--- a/cpu/mpc5xxx/loadtask.c
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-/* BestComm/SmartComm microcode */
-extern int taskTable;
-
-void loadtask(int basetask, int tasks)
-{
- int *sram = (int *)MPC5XXX_SRAM;
- int *task_org = &taskTable;
- unsigned int start, offset, end;
- int i;
-
-#ifdef DEBUG
- printf("basetask = %d, tasks = %d\n", basetask, tasks);
- printf("task_org = 0x%08x\n", (unsigned int)task_org);
-#endif
-
- /* setup TaskBAR register */
- *(vu_long *)MPC5XXX_SDMA = MPC5XXX_SRAM;
-
- /* relocate task table entries */
- offset = (unsigned int)sram;
- for (i = basetask; i < basetask + tasks; i++) {
- sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
- sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
- sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
- sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
- sram[i * 8 + 4] = task_org[i * 8 + 4];
- sram[i * 8 + 5] = task_org[i * 8 + 5];
- sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
- sram[i * 8 + 7] = task_org[i * 8 + 7];
- }
-
- /* relocate task descriptors */
- start = (sram[basetask * 8] - (unsigned int)sram);
- end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int)sram);
-
-#ifdef DEBUG
- printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
- start /= 4;
- end /= 4;
- for (i = start; i <= end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate variables */
- start = (sram[basetask * 8 + 2] - (unsigned int)sram);
- end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 - (unsigned int)sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate function decriptors */
- start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int)sram);
- end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 - (unsigned int)sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- asm volatile ("sync");
-}
diff --git a/cpu/mpc5xxx/pci_mpc5200.c b/cpu/mpc5xxx/pci_mpc5200.c
deleted file mode 100644
index 8268f8a..0000000
--- a/cpu/mpc5xxx/pci_mpc5200.c
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_PCI)
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <mpc5xxx.h>
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_MEMORY_SIZE (1024 * 1024 * 1024)
-
-/* PCIIWCR bit fields */
-#define IWCR_MEM (0 << 3)
-#define IWCR_IO (1 << 3)
-#define IWCR_READ (0 << 1)
-#define IWCR_READLINE (1 << 1)
-#define IWCR_READMULT (2 << 1)
-#define IWCR_EN (1 << 0)
-
-static int mpc5200_read_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32* value)
-{
- *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
- eieio();
- udelay(10);
-#if (defined CONFIG_PF5200 || defined CONFIG_CPCI5200)
- if (dev & 0x00ff0000) {
- u32 val;
- val = in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+2));
- udelay(10);
- val = val << 16;
- val |= in_le16((volatile u16 *)(CONFIG_PCI_IO_PHYS+0));
- *value = val;
- } else {
- *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
- }
- udelay(10);
-#else
- *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS);
-#endif
- eieio();
- *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
- udelay(10);
- return 0;
-}
-
-static int mpc5200_write_config_dword(struct pci_controller *hose,
- pci_dev_t dev, int offset, u32 value)
-{
- *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset;
- eieio();
- udelay(10);
- out_le32((volatile u32 *)CONFIG_PCI_IO_PHYS, value);
- eieio();
- *(volatile u32 *)MPC5XXX_PCI_CAR = 0;
- udelay(10);
- return 0;
-}
-
-void pci_mpc5xxx_init (struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System space */
- pci_set_region(hose->regions + 0,
- CONFIG_PCI_MEMORY_BUS,
- CONFIG_PCI_MEMORY_PHYS,
- CONFIG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CONFIG_PCI_MEM_BUS,
- CONFIG_PCI_MEM_PHYS,
- CONFIG_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI IO space */
- pci_set_region(hose->regions + 2,
- CONFIG_PCI_IO_BUS,
- CONFIG_PCI_IO_PHYS,
- CONFIG_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose(hose);
-
- /* GPIO Multiplexing - enable PCI */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~(1 << 15);
-
- /* Set host bridge as pci master and enable memory decoding */
- *(vu_long *)MPC5XXX_PCI_CMD |=
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-
- /* Set maximum latency timer */
- *(vu_long *)MPC5XXX_PCI_CFG |= (0xf800);
-
- /* Set cache line size */
- *(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) |
- (CONFIG_SYS_CACHELINE_SIZE / 4);
-
- /* Map MBAR to PCI space */
- *(vu_long *)MPC5XXX_PCI_BAR0 = CONFIG_SYS_MBAR;
- *(vu_long *)MPC5XXX_PCI_TBATR0 = CONFIG_SYS_MBAR | 1;
-
- /* Map RAM to PCI space */
- *(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3);
- *(vu_long *)MPC5XXX_PCI_TBATR1 = CONFIG_PCI_MEMORY_PHYS | 1;
-
- /* Park XLB on PCI */
- *(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~((7 << 8) | (3 << 5));
- *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (3 << 8) | (3 << 5);
-
- /* Disable interrupts from PCI controller */
- *(vu_long *)MPC5XXX_PCI_GSCR &= ~(7 << 12);
- *(vu_long *)MPC5XXX_PCI_ICR &= ~(7 << 24);
-
- /* Set PCI retry counter to 0 = infinite retry. */
- /* The default of 255 is too short for slow devices. */
- *(vu_long *)MPC5XXX_PCI_ICR &= 0xFFFFFF00;
-
- /* Disable initiator windows */
- *(vu_long *)MPC5XXX_PCI_IWCR = 0;
-
- /* Map PCI memory to physical space */
- *(vu_long *)MPC5XXX_PCI_IW0BTAR = CONFIG_PCI_MEM_PHYS |
- (((CONFIG_PCI_MEM_SIZE - 1) >> 8) & 0x00ff0000) |
- (CONFIG_PCI_MEM_BUS >> 16);
- *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_MEM | IWCR_READ | IWCR_EN) << 24;
-
- /* Map PCI I/O to physical space */
- *(vu_long *)MPC5XXX_PCI_IW1BTAR = CONFIG_PCI_IO_PHYS |
- (((CONFIG_PCI_IO_SIZE - 1) >> 8) & 0x00ff0000) |
- (CONFIG_PCI_IO_BUS >> 16);
- *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_IO | IWCR_READ | IWCR_EN) << 16;
-
- /* Reset the PCI bus */
- *(vu_long *)MPC5XXX_PCI_GSCR |= 1;
- udelay(1000);
- *(vu_long *)MPC5XXX_PCI_GSCR &= ~1;
- udelay(1000);
-
- pci_set_ops(hose,
- pci_hose_read_config_byte_via_dword,
- pci_hose_read_config_word_via_dword,
- mpc5200_read_config_dword,
- pci_hose_write_config_byte_via_dword,
- pci_hose_write_config_word_via_dword,
- mpc5200_write_config_dword);
-
- udelay(1000);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif /* CONFIG_PCI */
diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c
deleted file mode 100644
index 6675988..0000000
--- a/cpu/mpc5xxx/serial.c
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * (C) Copyright 2000 - 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
- * Linux/PPC sources (m8260_tty.c had no copyright info in it).
- *
- * Martin Krause, 8 Jun 2006
- * Added CONFIG_SERIAL_MULTI support
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-
-#if defined (CONFIG_SERIAL_MULTI)
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_PSC_CONSOLE)
-
-#if CONFIG_PSC_CONSOLE == 1
-#define PSC_BASE MPC5XXX_PSC1
-#elif CONFIG_PSC_CONSOLE == 2
-#define PSC_BASE MPC5XXX_PSC2
-#elif CONFIG_PSC_CONSOLE == 3
-#define PSC_BASE MPC5XXX_PSC3
-#elif CONFIG_PSC_CONSOLE == 4
-#define PSC_BASE MPC5XXX_PSC4
-#elif CONFIG_PSC_CONSOLE == 5
-#define PSC_BASE MPC5XXX_PSC5
-#elif CONFIG_PSC_CONSOLE == 6
-#define PSC_BASE MPC5XXX_PSC6
-#else
-#error CONFIG_PSC_CONSOLE must be in 1 ... 6
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI) && !defined(CONFIG_PSC_CONSOLE2)
-#error you must define CONFIG_PSC_CONSOLE2 if CONFIG_SERIAL_MULTI is set
-#endif
-
-#if defined(CONFIG_SERIAL_MULTI)
-#if CONFIG_PSC_CONSOLE2 == 1
-#define PSC_BASE2 MPC5XXX_PSC1
-#elif CONFIG_PSC_CONSOLE2 == 2
-#define PSC_BASE2 MPC5XXX_PSC2
-#elif CONFIG_PSC_CONSOLE2 == 3
-#define PSC_BASE2 MPC5XXX_PSC3
-#elif CONFIG_PSC_CONSOLE2 == 4
-#define PSC_BASE2 MPC5XXX_PSC4
-#elif CONFIG_PSC_CONSOLE2 == 5
-#define PSC_BASE2 MPC5XXX_PSC5
-#elif CONFIG_PSC_CONSOLE2 == 6
-#define PSC_BASE2 MPC5XXX_PSC6
-#else
-#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6
-#endif
-#endif /* CONFIG_SERIAL_MULTI */
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_init_dev (unsigned long dev_base)
-#else
-int serial_init (void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- unsigned long baseclk;
- int div;
-
- /* reset PSC */
- psc->command = PSC_SEL_MODE_REG_1;
-
- /* select clock sources */
- psc->psc_clock_select = 0;
- baseclk = (gd->ipb_clk + 16) / 32;
-
- /* switch to UART mode */
- psc->sicr = 0;
-
- /* configure parity, bit length and so on */
- psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
- psc->mode = PSC_MODE_ONE_STOP;
-
- /* set up UART divisor */
- div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
- psc->ctur = (div >> 8) & 0xff;
- psc->ctlr = div & 0xff;
-
- /* disable all interrupts */
- psc->psc_imr = 0;
-
- /* reset and enable Rx/Tx */
- psc->command = PSC_RST_RX;
- psc->command = PSC_RST_TX;
- psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
-
- return (0);
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_putc_dev (unsigned long dev_base, const char c)
-#else
-void serial_putc(const char c)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- if (c == '\n')
-#if defined(CONFIG_SERIAL_MULTI)
- serial_putc_dev (dev_base, '\r');
-#else
- serial_putc('\r');
-#endif
-
- /* Wait for last character to go. */
- while (!(psc->psc_status & PSC_SR_TXEMP))
- ;
-
- psc->psc_buffer_8 = c;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_putc_raw_dev(unsigned long dev_base, const char c)
-#else
-void serial_putc_raw(const char c)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- /* Wait for last character to go. */
- while (!(psc->psc_status & PSC_SR_TXEMP))
- ;
-
- psc->psc_buffer_8 = c;
-}
-
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_puts_dev (unsigned long dev_base, const char *s)
-#else
-void serial_puts (const char *s)
-#endif
-{
- while (*s) {
-#if defined(CONFIG_SERIAL_MULTI)
- serial_putc_dev (dev_base, *s++);
-#else
- serial_putc (*s++);
-#endif
- }
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_getc_dev (unsigned long dev_base)
-#else
-int serial_getc(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- /* Wait for a character to arrive. */
- while (!(psc->psc_status & PSC_SR_RXRDY))
- ;
-
- return psc->psc_buffer_8;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_tstc_dev (unsigned long dev_base)
-#else
-int serial_tstc(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- return (psc->psc_status & PSC_SR_RXRDY);
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_setbrg_dev (unsigned long dev_base)
-#else
-void serial_setbrg(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
- unsigned long baseclk, div;
-
- baseclk = (gd->ipb_clk + 16) / 32;
-
- /* set up UART divisor */
- div = (baseclk + (gd->baudrate/2)) / gd->baudrate;
- psc->ctur = (div >> 8) & 0xFF;
- psc->ctlr = div & 0xff;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-void serial_setrts_dev (unsigned long dev_base, int s)
-#else
-void serial_setrts(int s)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- if (s) {
- /* Assert RTS (become LOW) */
- psc->op1 = 0x1;
- }
- else {
- /* Negate RTS (become HIGH) */
- psc->op0 = 0x1;
- }
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial_getcts_dev (unsigned long dev_base)
-#else
-int serial_getcts(void)
-#endif
-{
-#if defined(CONFIG_SERIAL_MULTI)
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base;
-#else
- volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
-#endif
-
- return (psc->ip & 0x1) ? 0 : 1;
-}
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial0_init(void)
-{
- return (serial_init_dev(PSC_BASE));
-}
-
-int serial1_init(void)
-{
- return (serial_init_dev(PSC_BASE2));
-}
-void serial0_setbrg (void)
-{
- serial_setbrg_dev(PSC_BASE);
-}
-void serial1_setbrg (void)
-{
- serial_setbrg_dev(PSC_BASE2);
-}
-
-void serial0_putc(const char c)
-{
- serial_putc_dev(PSC_BASE,c);
-}
-
-void serial1_putc(const char c)
-{
- serial_putc_dev(PSC_BASE2, c);
-}
-void serial0_puts(const char *s)
-{
- serial_puts_dev(PSC_BASE, s);
-}
-
-void serial1_puts(const char *s)
-{
- serial_puts_dev(PSC_BASE2, s);
-}
-
-int serial0_getc(void)
-{
- return(serial_getc_dev(PSC_BASE));
-}
-
-int serial1_getc(void)
-{
- return(serial_getc_dev(PSC_BASE2));
-}
-int serial0_tstc(void)
-{
- return (serial_tstc_dev(PSC_BASE));
-}
-
-int serial1_tstc(void)
-{
- return (serial_tstc_dev(PSC_BASE2));
-}
-
-struct serial_device serial0_device =
-{
- "serial0",
- "UART0",
- serial0_init,
- serial0_setbrg,
- serial0_getc,
- serial0_tstc,
- serial0_putc,
- serial0_puts,
-};
-
-struct serial_device serial1_device =
-{
- "serial1",
- "UART1",
- serial1_init,
- serial1_setbrg,
- serial1_getc,
- serial1_tstc,
- serial1_putc,
- serial1_puts,
-};
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* CONFIG_PSC_CONSOLE */
diff --git a/cpu/mpc5xxx/speed.c b/cpu/mpc5xxx/speed.c
deleted file mode 100644
index 8027d3e..0000000
--- a/cpu/mpc5xxx/speed.c
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* Bus-to-Core Multipliers */
-
-static int bus2core[] = {
- 3, 2, 2, 2, 4, 4, 5, 9,
- 6, 11, 8, 10, 3, 12, 7, 0,
- 6, 5, 13, 2, 14, 4, 15, 9,
- 0, 11, 8, 10, 16, 12, 7, 0
-};
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- ulong val, vco;
-
-#if !defined(CONFIG_SYS_MPC5XXX_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC5XXX_CLKIN
-#endif
-
- val = *(vu_long *)MPC5XXX_CDM_PORCFG;
- if (val & (1 << 6)) {
- vco = CONFIG_SYS_MPC5XXX_CLKIN * 12;
- } else {
- vco = CONFIG_SYS_MPC5XXX_CLKIN * 16;
- }
- if (val & (1 << 5)) {
- gd->bus_clk = vco / 8;
- } else {
- gd->bus_clk = vco / 4;
- }
- gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 2;
-
- val = *(vu_long *)MPC5XXX_CDM_CFG;
- if (val & (1 << 8)) {
- gd->ipb_clk = gd->bus_clk / 2;
- } else {
- gd->ipb_clk = gd->bus_clk;
- }
- switch (val & 3) {
- case 0: gd->pci_clk = gd->ipb_clk; break;
- case 1: gd->pci_clk = gd->ipb_clk / 2; break;
- default: gd->pci_clk = gd->bus_clk / 4; break;
- }
-
- return (0);
-}
-
-int prt_mpc5xxx_clks (void)
-{
- char buf1[32], buf2[32], buf3[32];
-
- printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n",
- strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->ipb_clk),
- strmhz(buf3, gd->pci_clk)
- );
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
deleted file mode 100644
index ba49944..0000000
--- a/cpu/mpc5xxx/start.S
+++ /dev/null
@@ -1,777 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC5xxx CPUs
- */
-#include <config.h>
-#include <mpc5xxx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_MPC5xxx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
- mfmsr r5 /* save msr contents */
-
- /* Move CSBoot and adjust instruction pointer */
- /*--------------------------------------------------------------*/
-
-#if defined(CONFIG_SYS_LOWBOOT)
-# if defined(CONFIG_SYS_RAMBOOT)
-# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT
-# endif /* CONFIG_SYS_RAMBOOT */
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4(r4) /* CS0 start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x8(r4) /* CS0 stop */
- lis r3, 0x02010000@h
- ori r3, r3, 0x02010000@l
- stw r3, 0x54(r4) /* CS0 and Boot enable */
-
- lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */
- ori r3, r3, lowboot_reentry@l /* to the address space the linker used */
- mtlr r3
- blr
-
-lowboot_reentry:
- lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h
- ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l
- stw r3, 0x4c(r4) /* Boot start */
- lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h
- ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l
- stw r3, 0x50(r4) /* Boot stop */
- lis r3, 0x02000001@h
- ori r3, r3, 0x02000001@l
- stw r3, 0x54(r4) /* Boot enable, CS0 disable */
-#endif /* CONFIG_SYS_LOWBOOT */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- rlwinm r3, r3, 16, 16, 31
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC5xxx processor core */
- /*--------------------------------------------------------------*/
-
- bl init_5xxx_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the MPC5xxx processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_5xx_core
-init_5xxx_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_DCE
- lis r4, 0
- ori r4, r4, HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3, SVR
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
diff --git a/cpu/mpc5xxx/traps.c b/cpu/mpc5xxx/traps.c
deleted file mode 100644
index 934a2f2..0000000
--- a/cpu/mpc5xxx/traps.c
+++ /dev/null
@@ -1,245 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
- switch( regs->msr & 0x000F0000)
- {
- case (0x80000000>>12) :
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13) :
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14) :
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15) :
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc5xxx/u-boot-customlayout.lds b/cpu/mpc5xxx/u-boot-customlayout.lds
deleted file mode 100644
index 6c80139..0000000
--- a/cpu/mpc5xxx/u-boot-customlayout.lds
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/mpc5xxx/start.o (.text)
- cpu/mpc5xxx/traps.o (.text)
- lib/crc32.o (.text)
- arch/ppc/lib/cache.o (.text)
- arch/ppc/lib/time.o (.text)
-
- . = DEFINED(env_offset) ? env_offset : .;
- common/env_embedded.o (.ppcenv)
-
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc5xxx/u-boot.lds b/cpu/mpc5xxx/u-boot.lds
deleted file mode 100644
index 7fe1e95..0000000
--- a/cpu/mpc5xxx/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc5xxx/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc5xxx/usb.c b/cpu/mpc5xxx/usb.c
deleted file mode 100644
index bec7da3..0000000
--- a/cpu/mpc5xxx/usb.c
+++ /dev/null
@@ -1,58 +0,0 @@
-/*
- * (C) Copyright 2007
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-
-#include <mpc5xxx.h>
-
-int usb_cpu_init(void)
-{
- /* Set the USB Clock */
- *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
-
-#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
- /* remove all PSC3 USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
-#else
- /* remove all USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-#endif
- /* Activate USB port */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
-
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/mpc5xxx/usb_ohci.c b/cpu/mpc5xxx/usb_ohci.c
deleted file mode 100644
index 7976e4d..0000000
--- a/cpu/mpc5xxx/usb_ohci.c
+++ /dev/null
@@ -1,1646 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the MPC5200.
- *
- * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#include <mpc5xxx.h>
-
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-#define ohci_cpu_to_le16(x) (x)
-#define ohci_cpu_to_le32(x) (x)
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- urb_priv_t * purb = &urb_priv;
-
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (&regs->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (&regs->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (&regs->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (&regs->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv;
- int i, size = 0;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* if we have an unfinished URB from previous transaction let's
- * fail and scream as quickly as possible so as not to corrupt
- * further communication */
- if (!urb_finished) {
- err("sohci_submit_job: URB NOT FINISHED");
- return -1;
- }
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb_finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- }
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv = &urb_priv;
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return ohci_cpu_to_le16 (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->state = ED_OPER;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = ohci_cpu_to_le32 (info);
- td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
- if (data)
- td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
-
- tdINFO = ohci_cpu_to_le32 (td->hwINFO);
- tdBE = ohci_cpu_to_le32 (td->hwBE);
- tdCBP = ohci_cpu_to_le32 (td->hwCBP);
-
-
- if (!(usb_pipecontrol(lurb_priv->pipe) &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
- (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
- }
- td_list->hwNextTD = 0;
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- lurb_priv = &urb_priv;
- tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
-
- ed = td_list->ed;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
- if ((ed->state & (ED_OPER | ED_UNLINK))
- && (lurb_priv->state != URB_DEL)) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- urb_finished = 1;
- }
- }
-
- if (ed->state != ED_NEW) {
- edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
- edTailP = ohci_cpu_to_le32 (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#endif
- if (usb_pipeint(pipe)) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipebulk(pipe))
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb_finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- stat = USB_ST_CRC_ERR;
- urb_finished = 1;
- break;
- }
- }
-#if 0
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-#endif
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#endif
-
- /* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
- ohci->slot_name,
- readl (&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
-
- ints = OHCI_INTR_WDH;
-
- } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
-
- } else if ((ints &= readl (&regs->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- writel (OHCI_INTR_WDH, &regs->intrdisable);
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, &regs->intrenable);
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, &regs->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, &regs->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, &regs->intrenable);
- stat = 0xff;
- }
-
- writel (ints, &regs->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
-
- /* Set the USB Clock */
- *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK;
-
-#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */
- /* remove all PSC3 USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00;
-#else
- /* remove all USB bits first before ORing in ours */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000;
-#endif
- /* Activate USB port */
- *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG;
-
- memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)MPC5XXX_USB;
-
- gohci.flags = 0;
- gohci.slot_name = "mpc5200";
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- return -1;
- }
-
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#endif
- ohci_inited = 1;
- urb_finished = 1;
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
- return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/mpc5xxx/usb_ohci.h b/cpu/mpc5xxx/usb_ohci.h
deleted file mode 100644
index 629b529..0000000
--- a/cpu/mpc5xxx/usb_ohci.h
+++ /dev/null
@@ -1,418 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- __u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
- } roothub;
-} __attribute__((aligned(32)));
-
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status*/
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct
-{
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- int state;
- unsigned long pipe;
- int actual_length;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma;*/
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD+1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *
-td_alloc (struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++)
- {
- if (ptd[i].usb_dev == NULL)
- {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void
-ed_free (struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
diff --git a/cpu/mpc8220/Makefile b/cpu/mpc8220/Makefile
deleted file mode 100644
index b4fad28..0000000
--- a/cpu/mpc8220/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = io.o fec_dma_tasks.o
-COBJS = cpu.o cpu_init.o dramSetup.o fec.o i2c.o \
- interrupts.o loadtask.o speed.o \
- traps.o uart.o pci.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc8220/config.mk b/cpu/mpc8220/config.mk
deleted file mode 100644
index 3ce40c0..0000000
--- a/cpu/mpc8220/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC8220 -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc8220/u-boot.lds
diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c
deleted file mode 100644
index 563cfe0..0000000
--- a/cpu/mpc8220/cpu.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC8220 CPUs
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8220.h>
-#include <netdev.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- printf (CPU_ID_STR);
-
- printf (" (JTAG ID %08lx)", *(vu_long *) (CONFIG_SYS_MBAR + 0x50));
-
- printf (" at %s MHz\n", strmhz (buf, clock));
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- volatile gptmr8220_t *gptmr = (volatile gptmr8220_t *) MMAP_GPTMR;
- ulong msr;
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* Charge the watchdog timer */
- gptmr->Prescl = 10;
- gptmr->Count = 1;
-
- gptmr->Mode = GPT_TMS_SGPIO;
-
- gptmr->Control = GPT_CTRL_WDEN | GPT_CTRL_CE;
-
- return 1;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_MPC8220_FEC)
- mpc8220_fec_initialize(bis);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c
deleted file mode 100644
index 8f52c7d..0000000
--- a/cpu/mpc8220/cpu_init.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers.
- */
-void cpu_init_f (void)
-{
- volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB;
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
- volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* Clear all port configuration */
- portcfg->pcfg0 = 0;
- portcfg->pcfg1 = 0;
- portcfg->pcfg2 = 0;
- portcfg->pcfg3 = 0;
- portcfg->pcfg2 = CONFIG_SYS_GP1_PORT2_CONFIG;
- portcfg->pcfg3 = CONFIG_SYS_PCI_PORT3_CONFIG | CONFIG_SYS_GP2_PORT3_CONFIG;
-
- /*
- * Flexbus Controller: configure chip selects and enable them
- */
-#if defined (CONFIG_SYS_CS0_BASE)
- flexbus->csar0 = CONFIG_SYS_CS0_BASE;
-
-/* Sorcery-C can hang-up after CTRL reg initialization */
-#if defined (CONFIG_SYS_CS0_CTRL)
- flexbus->cscr0 = CONFIG_SYS_CS0_CTRL;
-#endif
- flexbus->csmr0 = ((CONFIG_SYS_CS0_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS1_BASE)
- flexbus->csar1 = CONFIG_SYS_CS1_BASE;
- flexbus->cscr1 = CONFIG_SYS_CS1_CTRL;
- flexbus->csmr1 = ((CONFIG_SYS_CS1_MASK - 1) & 0xffff0000) | 1;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS2_BASE)
- flexbus->csar2 = CONFIG_SYS_CS2_BASE;
- flexbus->cscr2 = CONFIG_SYS_CS2_CTRL;
- flexbus->csmr2 = ((CONFIG_SYS_CS2_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS2_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS3_BASE)
- flexbus->csar3 = CONFIG_SYS_CS3_BASE;
- flexbus->cscr3 = CONFIG_SYS_CS3_CTRL;
- flexbus->csmr3 = ((CONFIG_SYS_CS3_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS3_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS4_BASE)
- flexbus->csar4 = CONFIG_SYS_CS4_BASE;
- flexbus->cscr4 = CONFIG_SYS_CS4_CTRL;
- flexbus->csmr4 = ((CONFIG_SYS_CS4_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS4_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-#if defined (CONFIG_SYS_CS5_BASE)
- flexbus->csar5 = CONFIG_SYS_CS5_BASE;
- flexbus->cscr5 = CONFIG_SYS_CS5_CTRL;
- flexbus->csmr5 = ((CONFIG_SYS_CS5_MASK - 1) & 0xffff0000) | 1;
- portcfg->pcfg3 |= CONFIG_SYS_CS5_PORT3_CONFIG;
- __asm__ volatile ("sync");
-#endif
-
- /* This section of the code cannot place in cpu_init_r(),
- it will cause the system to hang */
- /* enable timebase */
- xlbarb->addrTenTimeOut = 0x1000;
- xlbarb->dataTenTimeOut = 0x1000;
- xlbarb->busActTimeOut = 0x2000;
-
- xlbarb->config = 0x00002000;
-
- /* Master Priority Enable */
- xlbarb->mastPriority = 0;
- xlbarb->mastPriEn = 0xff;
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- /* this may belongs to disable interrupt section */
- /* mask all interrupts */
- *(vu_long *) 0xf0000700 = 0xfffffc00;
- *(vu_long *) 0xf0000714 |= 0x0001ffff;
- *(vu_long *) 0xf0000710 &= ~0x00000f00;
-
- /* route critical ints to normal ints */
- *(vu_long *) 0xf0000710 |= 0x00000001;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC8220_FEC)
- /* load FEC microcode */
- loadtask (0, 2);
-#endif
- return (0);
-}
diff --git a/cpu/mpc8220/dma.h b/cpu/mpc8220/dma.h
deleted file mode 100644
index d06ee63..0000000
--- a/cpu/mpc8220/dma.h
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- *
- * MPC8220 dma header file
- */
-
-#ifndef __MPC8220_DMA_H
-#define __MPC8220_DMA_H
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Task number assignment */
-#define FEC_RECV_TASK_NO 0
-#define FEC_XMIT_TASK_NO 1
-
-/*---------------------------------------------------------------------
- * Stuff for Ethernet Tx/Rx tasks
- *---------------------------------------------------------------------
- */
-
-/* Layout of Ethernet controller Parameter SRAM area:
- * ----------------------------------------------------------------
- * 0x00: TBD_BASE, base address of TX BD ring
- * 0x04: TBD_NEXT, address of next TX BD to be processed
- * 0x08: RBD_BASE, base address of RX BD ring
- * 0x0C: RBD_NEXT, address of next RX BD to be processed
- * ---------------------------------------------------------------
- * ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH).
- */
-
-/* base address of SRAM area to store parameters used by Ethernet tasks */
-#define FEC_PARAM_BASE (MMAP_SRAM + 0x5b00)
-
-/* base address of SRAM area for buffer descriptors */
-#define FEC_BD_BASE (MMAP_SRAM + 0x5b20)
-
-/*---------------------------------------------------------------------
- * common shortcuts used by driver C code
- *---------------------------------------------------------------------
- */
-
-/* Disable SmartDMA task */
-#define DMA_TASK_DISABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *)(MMAP_DMA + 0x0000001c + 2 * tasknum); \
- *tcr = (*tcr) & (~0x8000); \
-}
-
-/* Enable SmartDMA task */
-#define DMA_TASK_ENABLE(tasknum) \
-{ \
- volatile ushort *tcr = (ushort *) (MMAP_DMA + 0x0000001c + 2 * tasknum);\
- *tcr = (*tcr) | 0x8000; \
-}
-
-/* Clear interrupt pending bits */
-#define DMA_CLEAR_IEVENT(tasknum) \
-{ \
- struct mpc8220_dma *dma = (struct mpc8220_dma *)MMAP_DMA; \
- dma->IntPend = (1 << tasknum); \
-}
-
-#endif /* __MPC8220_DMA_H */
diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c
deleted file mode 100644
index 52cf133..0000000
--- a/cpu/mpc8220/dramSetup.c
+++ /dev/null
@@ -1,752 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-DESCRIPTION
-Read Dram spd and base on its information to calculate the memory size,
-characteristics to initialize the dram on MPC8220
-*/
-
-#include <common.h>
-#include <mpc8220.h>
-#include "i2cCore.h"
-#include "dramSetup.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define SPD_SIZE CONFIG_SYS_SDRAM_SPD_SIZE
-#define DRAM_SPD (CONFIG_SYS_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */
-#define TOTAL_BANK CONFIG_SYS_SDRAM_TOTAL_BANKS
-
-int spd_status (volatile i2c8220_t * pi2c, u8 sta_bit, u8 truefalse)
-{
- int i;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- return (ERROR);
-}
-
-int spd_clear (volatile i2c8220_t * pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-int spd_stop (volatile i2c8220_t * pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (spd_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (spd_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (spd_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-int readSpdData (u8 * spdData)
-{
- volatile i2c8220_t *pi2cReg;
- volatile pcfg8220_t *pcfg;
- u8 slvAdr = DRAM_SPD;
- u8 Tmp;
- int Length = SPD_SIZE;
- int i = 0;
-
- /* Enable Port Configuration for SDA and SDL signals */
- pcfg = (volatile pcfg8220_t *) (MMAP_PCFG);
- __asm__ ("sync");
- pcfg->pcfg3 &= ~CONFIG_SYS_I2C_PORT3_CONFIG;
- __asm__ ("sync");
-
- /* Points the structure to I2c mbar memory offset */
- pi2cReg = (volatile i2c8220_t *) (MMAP_I2C);
-
-
- /* Clear FDR, ADR, SR and CR reg */
- pi2cReg->adr = 0;
- pi2cReg->fdr = 0;
- pi2cReg->cr = 0;
- pi2cReg->sr = 0;
-
- /* Set for fix XLB Bus Frequency */
- switch (gd->bus_clk) {
- case 60000000:
- pi2cReg->fdr = 0x15;
- break;
- case 70000000:
- pi2cReg->fdr = 0x16;
- break;
- case 80000000:
- pi2cReg->fdr = 0x3a;
- break;
- case 90000000:
- pi2cReg->fdr = 0x17;
- break;
- case 100000000:
- pi2cReg->fdr = 0x3b;
- break;
- case 110000000:
- pi2cReg->fdr = 0x18;
- break;
- case 120000000:
- pi2cReg->fdr = 0x19;
- break;
- case 130000000:
- pi2cReg->fdr = 0x1a;
- break;
- }
-
- pi2cReg->adr = CONFIG_SYS_I2C_SLAVE<<1;
-
- pi2cReg->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (spd_status (pi2cReg, I2C_STA_BB, 0) != OK) {
- if ((pi2cReg->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (spd_status (pi2cReg, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- pi2cReg->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
- pi2cReg->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (spd_status (pi2cReg, I2C_STA_BB, 1) != OK)
- return ERROR;
-
-
- /* Write slave address */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Issue the offset to start */
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = 0; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
-
- /* Set repeat start */
- pi2cReg->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- pi2cReg->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2cReg->dr = slvAdr | 1; /* Write a byte */
-
- if (spd_status (pi2cReg, I2C_STA_CF, 1) != OK) { /* Transfer not complete? */
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (spd_status (pi2cReg, I2C_STA_IF, 1) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- pi2cReg->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2cReg->sr & 0x07) == 0x07) || (pi2cReg->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (spd_readbyte (pi2cReg, &Tmp, &i) != OK) {
- spd_stop (pi2cReg);
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2cReg->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2cReg->cr &= ~I2C_CTL_STA;
-
- if (spd_readbyte (pi2cReg, spdData, &Length) != OK) {
- return spd_stop (pi2cReg);
- }
- i++;
- Length--;
- spdData++;
- }
-
- /* Stop the service */
- spd_stop (pi2cReg);
-
- return OK;
-}
-
-int getBankInfo (int bank, draminfo_t * pBank)
-{
- int status;
- int checksum;
- int count;
- u8 spdData[SPD_SIZE];
-
-
- if (bank > 2 || pBank == 0) {
- /* illegal values */
- return (-42);
- }
-
- status = readSpdData (&spdData[0]);
- if (status < 0)
- return (-1);
-
- /* check the checksum */
- for (count = 0, checksum = 0; count < LOC_CHECKSUM; count++)
- checksum += spdData[count];
-
- checksum = checksum - ((checksum / 256) * 256);
-
- if (checksum != spdData[LOC_CHECKSUM])
- return (-2);
-
- /* Get the memory type */
- if (!
- ((spdData[LOC_TYPE] == TYPE_DDR)
- || (spdData[LOC_TYPE] == TYPE_SDR)))
- /* not one of the types we support */
- return (-3);
-
- pBank->type = spdData[LOC_TYPE];
-
- /* Set logical banks */
- pBank->banks = spdData[LOC_LOGICAL_BANKS];
-
- /* Check that we have enough physical banks to cover the bank we are
- * figuring out. Odd-numbered banks correspond to the second bank
- * on the device.
- */
- if (bank & 1) {
- /* Second bank of a "device" */
- if (spdData[LOC_PHYS_BANKS] < 2)
- /* this bank doesn't exist on the "device" */
- return (-4);
-
- if (spdData[LOC_ROWS] & 0xf0)
- /* Two asymmetric banks */
- pBank->rows = spdData[LOC_ROWS] >> 4;
- else
- pBank->rows = spdData[LOC_ROWS];
-
- if (spdData[LOC_COLS] & 0xf0)
- /* Two asymmetric banks */
- pBank->cols = spdData[LOC_COLS] >> 4;
- else
- pBank->cols = spdData[LOC_COLS];
- } else {
- /* First bank of a "device" */
- pBank->rows = spdData[LOC_ROWS];
- pBank->cols = spdData[LOC_COLS];
- }
-
- pBank->width = spdData[LOC_WIDTH_HIGH] << 8 | spdData[LOC_WIDTH_LOW];
- pBank->bursts = spdData[LOC_BURSTS];
- pBank->CAS = spdData[LOC_CAS];
- pBank->CS = spdData[LOC_CS];
- pBank->WE = spdData[LOC_WE];
- pBank->Trp = spdData[LOC_Trp];
- pBank->Trcd = spdData[LOC_Trcd];
- pBank->buffered = spdData[LOC_Buffered] & 1;
- pBank->refresh = spdData[LOC_REFRESH];
-
- return (0);
-}
-
-
-/* checkMuxSetting -- given a row/column device geometry, return a mask
- * of the valid DRAM controller addr_mux settings for
- * that geometry.
- *
- * Arguments: u8 rows: number of row addresses in this device
- * u8 columns: number of column addresses in this device
- *
- * Returns: a mask of the allowed addr_mux settings for this
- * geometry. Each bit in the mask represents a
- * possible addr_mux settings (for example, the
- * (1<<2) bit in the mask represents the 0b10 setting)/
- *
- */
-u8 checkMuxSetting (u8 rows, u8 columns)
-{
- muxdesc_t *pIdx, *pMux;
- u8 mask;
- int lrows, lcolumns;
- u32 mux[4] = { 0x00080c04, 0x01080d03, 0x02080e02, 0xffffffff };
-
- /* Setup MuxDescriptor in SRAM space */
- /* MUXDESC AddressRuns [] = {
- { 0, 8, 12, 4 }, / setting, columns, rows, extra columns /
- { 1, 8, 13, 3 }, / setting, columns, rows, extra columns /
- { 2, 8, 14, 2 }, / setting, columns, rows, extra columns /
- { 0xff } / list terminator /
- }; */
-
- pIdx = (muxdesc_t *) & mux[0];
-
- /* Check rows x columns against each possible address mux setting */
- for (pMux = pIdx, mask = 0;; pMux++) {
- lrows = rows;
- lcolumns = columns;
-
- if (pMux->MuxValue == 0xff)
- break; /* end of list */
-
- /* For a given mux setting, since we want all the memory in a
- * device to be contiguous, we want the device "use up" the
- * address lines such that there are no extra column or row
- * address lines on the device.
- */
-
- lcolumns -= pMux->Columns;
- if (lcolumns < 0)
- /* Not enough columns to get to the rows */
- continue;
-
- lrows -= pMux->Rows;
- if (lrows > 0)
- /* we have extra rows left -- can't do that! */
- continue;
-
- /* At this point, we either have to have used up all the
- * rows or we have to have no columns left.
- */
-
- if (lcolumns != 0 && lrows != 0)
- /* rows AND columns are left. Bad! */
- continue;
-
- lcolumns -= pMux->MoreColumns;
-
- if (lcolumns <= 0)
- mask |= (1 << pMux->MuxValue);
- }
-
- return (mask);
-}
-
-
-u32 dramSetup (void)
-{
- draminfo_t DramInfo[TOTAL_BANK];
- draminfo_t *pDramInfo;
- u32 size, temp, cfg_value, mode_value, refresh;
- u8 *ptr;
- u8 bursts, Trp, Trcd, type, buffered;
- u8 muxmask, rows, columns;
- int count, banknum;
- u32 *prefresh, *pIdx;
- u32 refrate[8] = { 15625, 3900, 7800, 31300,
- 62500, 125000, 0xffffffff, 0xffffffff
- };
- volatile sysconf8220_t *sysconf;
- volatile memctl8220_t *memctl;
-
- sysconf = (volatile sysconf8220_t *) MMAP_MBAR;
- memctl = (volatile memctl8220_t *) MMAP_MEMCTL;
-
- /* Set everything in the descriptions to zero */
- ptr = (u8 *) & DramInfo[0];
- for (count = 0; count < sizeof (DramInfo); count++)
- *ptr++ = 0;
-
- for (banknum = 0; banknum < TOTAL_BANK; banknum++)
- sysconf->cscfg[banknum];
-
- /* Descriptions of row/column address muxing for various
- * addr_mux settings.
- */
-
- pIdx = prefresh = (u32 *) & refrate[0];
-
- /* Get all the info for all three logical banks */
- bursts = 0xff;
- Trp = 0;
- Trcd = 0;
- type = 0;
- buffered = 0xff;
- refresh = 0xffffffff;
- muxmask = 0xff;
-
- /* Two bank, CS0 and CS1 */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- pDramInfo->ordinal = banknum; /* initial sorting */
- if (getBankInfo (banknum, pDramInfo) < 0)
- continue;
-
- /* get cumulative parameters of all three banks */
- if (type && pDramInfo->type != type)
- return 0;
-
- type = pDramInfo->type;
- rows = pDramInfo->rows;
- columns = pDramInfo->cols;
-
- /* This chip only supports 13 DRAM memory lines, but some devices
- * have 14 rows. To deal with this, ignore the 14th address line
- * by limiting the number of rows (and columns) to 13. This will
- * mean that for 14-row devices we will only be able to use
- * half of the memory, but it's better than nothing.
- */
- if (rows > 13)
- rows = 13;
- if (columns > 13)
- columns = 13;
-
- pDramInfo->size =
- ((1 << (rows + columns)) * pDramInfo->width);
- pDramInfo->size *= pDramInfo->banks;
- pDramInfo->size >>= 3;
-
- /* figure out which addr_mux configurations will support this device */
- muxmask &= checkMuxSetting (rows, columns);
- if (muxmask == 0)
- return 0;
-
- buffered = pDramInfo->buffered;
- bursts &= pDramInfo->bursts; /* union of all bursts */
- if (pDramInfo->Trp > Trp) /* worst case (longest) Trp */
- Trp = pDramInfo->Trp;
-
- if (pDramInfo->Trcd > Trcd) /* worst case (longest) Trcd */
- Trcd = pDramInfo->Trcd;
-
- prefresh = pIdx;
- /* worst case (shortest) Refresh period */
- if (refresh > prefresh[pDramInfo->refresh & 7])
- refresh = prefresh[pDramInfo->refresh & 7];
-
- } /* for loop */
-
-
- /* We only allow a burst length of 8! */
- if (!(bursts & 8))
- bursts = 8;
-
- /* Sort the devices. In order to get each chip select region
- * aligned properly, put the biggest device at the lowest address.
- * A simple bubble sort will do the trick.
- */
- for (banknum = 0, pDramInfo = &DramInfo[0];
- banknum < TOTAL_BANK; banknum++, pDramInfo++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (pDramInfo->size < DramInfo[i].size &&
- pDramInfo->ordinal < DramInfo[i].ordinal) {
- /* If the current bank is smaller, but if the ordinal is also
- * smaller, swap the ordinals
- */
- u8 temp8;
-
- temp8 = DramInfo[i].ordinal;
- DramInfo[i].ordinal = pDramInfo->ordinal;
- pDramInfo->ordinal = temp8;
- }
- }
- }
-
-
- /* Now figure out the base address for each bank. While
- * we're at it, figure out how much memory there is.
- *
- */
- size = 0;
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- int i;
-
- for (i = 0; i < TOTAL_BANK; i++) {
- if (DramInfo[i].ordinal == banknum
- && DramInfo[i].size != 0) {
- DramInfo[i].base = size;
- size += DramInfo[i].size;
- }
- }
- }
-
- /* Set up the Drive Strength register */
- sysconf->sdramds = CONFIG_SYS_SDRAM_DRIVE_STRENGTH;
-
- /* ********************** Cfg 1 ************************* */
-
- /* Set the single read to read/write/precharge delay */
- cfg_value = CFG1_SRD2RWP ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the single write to read/write/precharge delay.
- * This may or may not be correct. The controller spec
- * says "tWR", but "tWR" does not appear in the SPD. It
- * always seems to be 15nsec for the class of device we're
- * using, which turns out to be 2 clock cycles at 133MHz,
- * so that's what we're going to use.
- *
- * HOWEVER, because of a bug in the controller, for DDR
- * we need to set this to be the same as the value
- * calculated for bwt2rwp.
- */
- cfg_value |= CFG1_SWT2RWP ((type == TYPE_DDR) ? 7 : 2);
-
- /* Set the Read CAS latency. We're going to use a CL of
- * 2.5 for DDR and 2 SDR.
- */
- cfg_value |= CFG1_RLATENCY ((type == TYPE_DDR) ? 7 : 2);
-
-
- /* Set the Active to Read/Write delay. This depends
- * on Trcd which is reported as nanoseconds times 4.
- * We want to calculate Trcd (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trcd * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, with a minimum value of 2 */
- temp = ((temp + 999) / 1000) - 1;
- if (temp < 2)
- temp = 2;
-
- cfg_value |= CFG1_ACT2WR (temp);
-
- /* Set the precharge to active delay. This depends
- * on Trp which is reported as nanoseconds times 4.
- * We want to calculate Trp (in nanoseconds) times XLB clock (in Hz)
- * which gives us a dimensionless quantity. Play games with
- * the divisions so we don't run out of dynamic ranges.
- */
- /* account for megaherz and the times 4 */
- temp = (Trp * (gd->bus_clk / 1000000)) / 4;
-
- /* account for nanoseconds and round up, then subtract 1, with a
- * minumum value of 1 and a maximum value of 7.
- */
- temp = (((temp + 999) / 1000) - 1) & 7;
- if (temp < 1)
- temp = 1;
-
- cfg_value |= CFG1_PRE2ACT (temp);
-
- /* Set refresh to active delay. This depends
- * on Trfc which is not reported in the SPD.
- * We'll use a nominal value of 75nsec which is
- * what the controller spec uses.
- */
- temp = (75 * (gd->bus_clk / 1000000));
- /* account for nanoseconds and round up, then subtract 1 */
- cfg_value |= CFG1_REF2ACT (((temp + 999) / 1000) - 1);
-
- /* Set the write latency, using the values given in the controller spec */
- cfg_value |= CFG1_WLATENCY ((type == TYPE_DDR) ? 3 : 0);
- memctl->cfg1 = cfg_value; /* cfg 1 */
- asm volatile ("sync");
-
-
- /* ********************** Cfg 2 ************************* */
-
- /* Set the burst read to read/precharge delay */
- cfg_value = CFG2_BRD2RP ((type == TYPE_DDR) ? 5 : 8);
-
- /* Set the burst write to read/precharge delay. Semi-magic numbers
- * based on the controller spec recommendations, assuming tWR is
- * two clock cycles.
- */
- cfg_value |= CFG2_BWT2RWP ((type == TYPE_DDR) ? 7 : 10);
-
- /* Set the Burst read to write delay. Semi-magic numbers
- * based on the DRAM controller documentation.
- */
- cfg_value |= CFG2_BRD2WT ((type == TYPE_DDR) ? 7 : 0xb);
-
- /* Set the burst length -- must be 8!! Well, 7, actually, becuase
- * it's burst lenght minus 1.
- */
- cfg_value |= CFG2_BURSTLEN (7);
- memctl->cfg2 = cfg_value; /* cfg 2 */
- asm volatile ("sync");
-
-
- /* ********************** mode ************************* */
-
- /* Set enable bit, CKE high/low bits, and the DDR/SDR mode bit,
- * disable automatic refresh.
- */
- cfg_value = CTL_MODE_ENABLE | CTL_CKE_HIGH |
- ((type == TYPE_DDR) ? CTL_DDR_MODE : 0);
-
- /* Set the address mux based on whichever setting(s) is/are common
- * to all the devices we have. If there is more than one, choose
- * one arbitrarily.
- */
- if (muxmask & 0x4)
- cfg_value |= CTL_ADDRMUX (2);
- else if (muxmask & 0x2)
- cfg_value |= CTL_ADDRMUX (1);
- else
- cfg_value |= CTL_ADDRMUX (0);
-
- /* Set the refresh interval. */
- temp = ((refresh * (gd->bus_clk / 1000000)) / (1000 * 64)) - 1;
- cfg_value |= CTL_REFRESH_INTERVAL (temp);
-
- /* Set buffered/non-buffered memory */
- if (buffered)
- cfg_value |= CTL_BUFFERED;
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- if (type == TYPE_DDR) {
- /* issue precharge all */
- temp = cfg_value | CTL_PRECHARGE_CMD;
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
- }
-
-
- /* Set up mode value for CAS latency */
-#if (CONFIG_SYS_SDRAM_CAS_LATENCY==5) /* CL=2.5 */
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2p5) | MODE_CMD);
-#else
- mode_value = (MODE_MODE | MODE_BURSTLEN (MODE_BURSTLEN_8) |
- MODE_BT_SEQUENTIAL | MODE_CL (MODE_CL_2) | MODE_CMD);
-#endif
- asm volatile ("sync");
-
- /* Write Extended Mode - enable DLL */
- if (type == TYPE_DDR) {
- temp = MODE_EXTENDED | MODE_X_DLL_ENABLE |
- MODE_X_DS_NORMAL | MODE_CMD;
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Write Mode - reset DLL, set CAS latency */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_RESETDLL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
- }
-
- /* Program the chip selects. */
- for (banknum = 0; banknum < TOTAL_BANK; banknum++) {
- if (DramInfo[banknum].size != 0) {
- u32 mask;
- int i;
-
- for (i = 0, mask = 1; i < 32; mask <<= 1, i++) {
- if (DramInfo[banknum].size & mask)
- break;
- }
- temp = (DramInfo[banknum].base & 0xfff00000) | (i -
- 1);
-
- sysconf->cscfg[banknum] = temp;
- asm volatile ("sync");
- }
- }
-
- /* Wait for DLL lock */
- udelay (200);
-
- temp = cfg_value | CTL_PRECHARGE_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- temp = cfg_value | CTL_REFRESH_CMD; /* issue precharge all */
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- memctl->ctrl = temp; /* ctrl */
- asm volatile ("sync");
-
- /* Write Mode - DLL normal */
- temp = mode_value | MODE_OPMODE (MODE_OPMODE_NORMAL);
- memctl->mode = (temp >> 16); /* mode */
- asm volatile ("sync");
-
- /* Enable refresh, enable DQS's (if DDR), and lock the control register */
- cfg_value &= ~CTL_MODE_ENABLE; /* lock register */
- cfg_value |= CTL_REFRESH_ENABLE; /* enable refresh */
-
- if (type == TYPE_DDR)
- cfg_value |= CTL_DQSOEN (0xf); /* enable DQS's for DDR */
-
- memctl->ctrl = cfg_value; /* ctrl */
- asm volatile ("sync");
-
- return size;
-}
diff --git a/cpu/mpc8220/dramSetup.h b/cpu/mpc8220/dramSetup.h
deleted file mode 100644
index 3b64e08..0000000
--- a/cpu/mpc8220/dramSetup.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * dramSetup.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCdramsetuph
-#define __INCdramsetuph
-#ifndef __ASSEMBLY__
-/* Where various things are in the SPD */
-#define LOC_TYPE 2
-#define LOC_CHECKSUM 63
-#define LOC_PHYS_BANKS 5
-#define LOC_LOGICAL_BANKS 17
-#define LOC_ROWS 3
-#define LOC_COLS 4
-#define LOC_WIDTH_HIGH 7
-#define LOC_WIDTH_LOW 6
-#define LOC_REFRESH 12
-#define LOC_BURSTS 16
-#define LOC_CAS 18
-#define LOC_CS 19
-#define LOC_WE 20
-#define LOC_Tcyc 9
-#define LOC_Tac 10
-#define LOC_Trp 27
-#define LOC_Trrd 28
-#define LOC_Trcd 29
-#define LOC_Tras 30
-#define LOC_Buffered 21
-/* Types of memory the SPD can tell us about.
- * We can actually only use SDRAM and DDR.
- */
-#define TYPE_DRAM 1 /* plain old dram */
-#define TYPE_EDO 2 /* EDO dram */
-#define TYPE_Nibble 3 /* serial nibble memory */
-#define TYPE_SDR 4 /* SDRAM */
-#define TYPE_ROM 5 /* */
-#define TYPE_SGRRAM 6 /* graphics memory */
-#define TYPE_DDR 7 /* DDR sdram */
-#define SDRAMDS_MASK 0x3 /* each field is 2 bits wide */
-#define SDRAMDS_SBE_SHIFT 8 /* Clock enable drive strength */
-#define SDRAMDS_SBC_SHIFT 6 /* Clocks drive strength */
-#define SDRAMDS_SBA_SHIFT 4 /* Address drive strength */
-#define SDRAMDS_SBS_SHIFT 2 /* SDR DQS drive strength */
-#define SDRAMDS_SBD_SHIFT 0 /* Data and DQS drive strength */
-#define DRIVE_STRENGTH_HIGH 0
-#define DRIVE_STRENGTH_MED 1
-#define DRIVE_STRENGTH_LOW 2
-#define DRIVE_STRENGTH_OFF 3
-
-#define OK 0
-#define ERROR -1
-/* Structure to hold information about address muxing. */
- typedef struct tagMuxDescriptor {
- u8 MuxValue;
- u8 Columns;
- u8 Rows;
- u8 MoreColumns;
-} muxdesc_t;
-
-/* Structure to define one physical bank of
- * memory. Note that dram size in bytes is
- * (2^^(rows+columns)) * width * banks / 8
-*/
-typedef struct tagDramInfo {
- u32 size; /* size in bytes */
- u32 base; /* base address */
- u8 ordinal; /* where in the memory map will we put this */
- u8 type;
- u8 rows;
- u8 cols;
- u16 width; /* width of each chip in bits */
- u8 banks; /* number of chips, aka logical banks */
- u8 bursts; /* bit-encoded allowable burst length */
- u8 CAS; /* bit-encoded CAS latency values */
- u8 CS; /* bit-encoded CS latency values */
- u8 WE; /* bit-encoded WE latency values */
- u8 Trp; /* bit-encoded row precharge time */
- u8 Trcd; /* bit-encoded RAS to CAS delay */
- u8 buffered; /* buffered or not */
- u8 refresh; /* encoded refresh rate */
-} draminfo_t;
-
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCdramsetuph */
diff --git a/cpu/mpc8220/fec.c b/cpu/mpc8220/fec.c
deleted file mode 100644
index 992e0ff..0000000
--- a/cpu/mpc8220/fec.c
+++ /dev/null
@@ -1,1000 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.c,
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <malloc.h>
-#include <net.h>
-#include <miiphy.h>
-#include "dma.h"
-#include "fec.h"
-
-#undef DEBUG
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
- defined(CONFIG_MPC8220_FEC)
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#ifdef DEBUG
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec);
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec);
-#endif /* DEBUG */
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len);
-#endif
-
-typedef struct {
- u8 data[1500]; /* actual data */
- int length; /* actual length */
- int used; /* buffer in use or not */
- u8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */
-} NBUF;
-
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal);
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data);
-
-/********************************************************************/
-#ifdef DEBUG
-static void mpc8220_fec_phydump (char *devname)
-{
- u16 phyStatus, i;
- u8 phyAddr = CONFIG_PHY_ADDR;
- u8 reg_mask[] = {
-#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
- /* regs to print: 0...7, 16...19, 21, 23, 24 */
- 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
-#else
- /* regs to print: 0...8, 16...20 */
- 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
-#endif
- };
-
- for (i = 0; i < 32; i++) {
- if (reg_mask[i]) {
- miiphy_read (devname, phyAddr, i, &phyStatus);
- printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- }
-}
-#endif
-
-/********************************************************************/
-static int mpc8220_fec_rbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
- char *data;
- static int once = 0;
-
- for (ix = 0; ix < FEC_RBD_NUM; ix++) {
- if (!once) {
- data = (char *) malloc (FEC_MAX_PKT_SIZE);
- if (data == NULL) {
- printf ("RBD INIT FAILED\n");
- return -1;
- }
- fec->rbdBase[ix].dataPointer = (u32) data;
- }
- fec->rbdBase[ix].status = FEC_RBD_EMPTY;
- fec->rbdBase[ix].dataLength = 0;
- }
- once++;
-
- /*
- * have the last RBD to close the ring
- */
- fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP;
- fec->rbdIndex = 0;
-
- return 0;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_init (mpc8220_fec_priv * fec)
-{
- int ix;
-
- for (ix = 0; ix < FEC_TBD_NUM; ix++) {
- fec->tbdBase[ix].status = 0;
- }
-
- /*
- * Have the last TBD to close the ring
- */
- fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP;
-
- /*
- * Initialize some indices
- */
- fec->tbdIndex = 0;
- fec->usedTbdIndex = 0;
- fec->cleanTbdNum = FEC_TBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_rbd_clean (mpc8220_fec_priv * fec, FEC_RBD * pRbd)
-{
- /*
- * Reset buffer descriptor as empty
- */
- if ((fec->rbdIndex) == (FEC_RBD_NUM - 1))
- pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY);
- else
- pRbd->status = FEC_RBD_EMPTY;
-
- pRbd->dataLength = 0;
-
- /*
- * Now, we have an empty RxBD, restart the SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
- /*
- * Increment BD count
- */
- fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM;
-}
-
-/********************************************************************/
-static void mpc8220_fec_tbd_scrub (mpc8220_fec_priv * fec)
-{
- FEC_TBD *pUsedTbd;
-
-#ifdef DEBUG
- printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n",
- fec->cleanTbdNum, fec->usedTbdIndex);
-#endif
-
- /*
- * process all the consumed TBDs
- */
- while (fec->cleanTbdNum < FEC_TBD_NUM) {
- pUsedTbd = &fec->tbdBase[fec->usedTbdIndex];
- if (pUsedTbd->status & FEC_TBD_READY) {
-#ifdef DEBUG
- printf ("Cannot clean TBD %d, in use\n",
- fec->cleanTbdNum);
-#endif
- return;
- }
-
- /*
- * clean this buffer descriptor
- */
- if (fec->usedTbdIndex == (FEC_TBD_NUM - 1))
- pUsedTbd->status = FEC_TBD_WRAP;
- else
- pUsedTbd->status = 0;
-
- /*
- * update some indeces for a correct handling of the TBD ring
- */
- fec->cleanTbdNum++;
- fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM;
- }
-}
-
-/********************************************************************/
-static void mpc8220_fec_set_hwaddr (mpc8220_fec_priv * fec, char *mac)
-{
- u8 currByte; /* byte for which to compute the CRC */
- int byte; /* loop - counter */
- int bit; /* loop - counter */
- u32 crc = 0xffffffff; /* initial value */
-
- /*
- * The algorithm used is the following:
- * we loop on each of the six bytes of the provided address,
- * and we compute the CRC by left-shifting the previous
- * value by one position, so that each bit in the current
- * byte of the address may contribute the calculation. If
- * the latter and the MSB in the CRC are different, then
- * the CRC value so computed is also ex-ored with the
- * "polynomium generator". The current byte of the address
- * is also shifted right by one bit at each iteration.
- * This is because the CRC generatore in hardware is implemented
- * as a shift-register with as many ex-ores as the radixes
- * in the polynomium. This suggests that we represent the
- * polynomiumm itself as a 32-bit constant.
- */
- for (byte = 0; byte < 6; byte++) {
- currByte = mac[byte];
- for (bit = 0; bit < 8; bit++) {
- if ((currByte & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- currByte >>= 1;
- }
- }
-
- crc = crc >> 26;
-
- /*
- * Set individual hash table register
- */
- if (crc >= 32) {
- fec->eth->iaddr1 = (1 << (crc - 32));
- fec->eth->iaddr2 = 0;
- } else {
- fec->eth->iaddr1 = 0;
- fec->eth->iaddr2 = (1 << crc);
- }
-
- /*
- * Set physical address
- */
- fec->eth->paddr1 =
- (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3];
- fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808;
-}
-
-/********************************************************************/
-static int mpc8220_fec_init (struct eth_device *dev, bd_t * bis)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- struct mpc8220_dma *dma = (struct mpc8220_dma *) MMAP_DMA;
- const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Begin\n");
-#endif
-
- /*
- * Initialize RxBD/TxBD rings
- */
- mpc8220_fec_rbd_init (fec);
- mpc8220_fec_tbd_init (fec);
-
- /*
- * Set up Pin Muxing for FEC 1
- */
- *(vu_long *) MMAP_PCFG = 0;
- *(vu_long *) (MMAP_PCFG + 4) = 0;
- /*
- * Clear FEC-Lite interrupt event register(IEVENT)
- */
- fec->eth->ievent = 0xffffffff;
-
- /*
- * Set interrupt mask register
- */
- fec->eth->imask = 0x00000000;
-
- /*
- * Set FEC-Lite receive control register(R_CNTRL):
- */
- if (fec->xcv_type == SEVENWIRE) {
- /*
- * Frame length=1518; 7-wire mode
- */
- fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */
- } else {
- /*
- * Frame length=1518; MII mode;
- */
- fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */
- }
-
- fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock
- * and do not drop the Preamble.
- */
- /* tbd - rtm */
- /*fec->eth->mii_speed = (((gd->ipb_clk >> 20) / 5) << 1); */
- /* No MII for 7-wire mode */
- fec->eth->mii_speed = 0x00000030;
- }
-
- /*
- * Set Opcode/Pause Duration Register
- */
- fec->eth->op_pause = 0x00010020; /*FIXME0xffff0020; */
-
- /*
- * Set Rx FIFO alarm and granularity value
- */
- fec->eth->rfifo_cntrl = 0x0c000000;
- fec->eth->rfifo_alarm = 0x0000030c;
-#ifdef DEBUG
- if (fec->eth->rfifo_status & 0x00700000) {
- printf ("mpc8220_fec_init() RFIFO error\n");
- }
-#endif
-
- /*
- * Set Tx FIFO granularity value
- */
- /*fec->eth->tfifo_cntrl = 0x0c000000; */ /*tbd - rtm */
- fec->eth->tfifo_cntrl = 0x0e000000;
-#ifdef DEBUG
- printf ("tfifo_status: 0x%08x\n", fec->eth->tfifo_status);
- printf ("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm);
-#endif
-
- /*
- * Set transmit fifo watermark register(X_WMRK), default = 64
- */
- fec->eth->tfifo_alarm = 0x00000080;
- fec->eth->x_wmrk = 0x2;
-
- /*
- * Set individual address filter for unicast address
- * and set physical address registers.
- */
- mpc8220_fec_set_hwaddr (fec, (char *)(dev->enetaddr));
-
- /*
- * Set multicast address filter
- */
- fec->eth->gaddr1 = 0x00000000;
- fec->eth->gaddr2 = 0x00000000;
-
- /*
- * Turn ON cheater FSM: ????
- */
- fec->eth->xmit_fsm = 0x03000000;
-
-#if 1
-/*#if defined(CONFIG_MPC5200)*/
- /*
- * Turn off COMM bus prefetch in the MGT5200 BestComm. It doesn't
- * work w/ the current receive task.
- */
- dma->PtdCntrl |= 0x00000001;
-#endif
-
- /*
- * Set priority of different initiators
- */
- dma->IPR0 = 7; /* always */
- dma->IPR3 = 6; /* Eth RX */
- dma->IPR4 = 5; /* Eth Tx */
-
- /*
- * Clear SmartDMA task interrupt pending bits
- */
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
-
- /*
- * Initialize SmartDMA parameters stored in SRAM
- */
- *(int *) FEC_TBD_BASE = (int) fec->tbdBase;
- *(int *) FEC_RBD_BASE = (int) fec->rbdBase;
- *(int *) FEC_TBD_NEXT = (int) fec->tbdBase;
- *(int *) FEC_RBD_NEXT = (int) fec->rbdBase;
-
- if (fec->xcv_type != SEVENWIRE) {
- /*
- * Initialize PHY(LXT971A):
- *
- * Generally, on power up, the LXT971A reads its configuration
- * pins to check for forced operation, If not cofigured for
- * forced operation, it uses auto-negotiation/parallel detection
- * to automatically determine line operating conditions.
- * If the PHY device on the other side of the link supports
- * auto-negotiation, the LXT971A auto-negotiates with it
- * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not
- * support auto-negotiation, the LXT971A automatically detects
- * the presence of either link pulses(10Mbps PHY) or Idle
- * symbols(100Mbps) and sets its operating conditions accordingly.
- *
- * When auto-negotiation is controlled by software, the following
- * steps are recommended.
- *
- * Note:
- * The physical address is dependent on hardware configuration.
- *
- */
- int timeout = 1;
- u16 phyStatus;
-
- /*
- * Reset PHY, then delay 300ns
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x8000);
- udelay (1000);
-
- if (fec->xcv_type == MII10) {
- /*
- * Force 10Base-T, FDX operation
- */
-#ifdef DEBUG
- printf ("Forcing 10 Mbps ethernet link... ");
-#endif
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
- /*
- miiphy_write(fec, phyAddr, 0x0, 0x0100);
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x0180);
-
- timeout = 20;
- do { /* wait for link status to go down */
- udelay (10000);
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("hmmm, should not have waited...");
-#endif
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("=");
-#endif
- } while ((phyStatus & 0x0004)); /* !link up */
-
- timeout = 1000;
- do { /* wait for link status to come back up */
- udelay (10000);
- if ((timeout--) == 0) {
- printf ("failed. Link is down.\n");
- break;
- }
- miiphy_read (dev->name, phyAddr, 0x1, &phyStatus);
-#ifdef DEBUG
- printf ("+");
-#endif
- } while (!(phyStatus & 0x0004)); /* !link up */
-
-#ifdef DEBUG
- printf ("done.\n");
-#endif
- } else { /* MII100 */
- /*
- * Set the auto-negotiation advertisement register bits
- */
- miiphy_write (dev->name, phyAddr, 0x4, 0x01e1);
-
- /*
- * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation
- */
- miiphy_write (dev->name, phyAddr, 0x0, 0x1200);
-
- /*
- * Wait for AN completion
- */
- timeout = 5000;
- do {
- udelay (1000);
-
- if ((timeout--) == 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 0 failed...\n");
-#endif
- return -1;
- }
-
- if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) !=
- 0) {
-#ifdef DEBUG
- printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus);
-#endif
- return -1;
- }
- } while (!(phyStatus & 0x0004));
-
-#ifdef DEBUG
- printf ("PHY auto neg complete! \n");
-#endif
- }
-
- }
-
- /*
- * Enable FEC-Lite controller
- */
- fec->eth->ecntrl |= 0x00000006;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * Enable SmartDMA receive task
- */
- DMA_TASK_ENABLE (FEC_RECV_TASK_NO);
-
-#ifdef DEBUG
- printf ("mpc8220_fec_init... Done \n");
-#endif
-
- return 1;
-}
-
-/********************************************************************/
-static void mpc8220_fec_halt (struct eth_device *dev)
-{
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- int counter = 0xffff;
-
-#ifdef DEBUG
- if (fec->xcv_type != SEVENWIRE)
- mpc8220_fec_phydump (dev->name);
-#endif
-
- /*
- * mask FEC chip interrupts
- */
- fec->eth->imask = 0;
-
- /*
- * issue graceful stop command to the FEC transmitter if necessary
- */
- fec->eth->x_cntrl |= 0x00000001;
-
- /*
- * wait for graceful stop to register
- */
- while ((counter--) && (!(fec->eth->ievent & 0x10000000)));
-
- /*
- * Disable SmartDMA tasks
- */
- DMA_TASK_DISABLE (FEC_XMIT_TASK_NO);
- DMA_TASK_DISABLE (FEC_RECV_TASK_NO);
-
- /*
- * Disable the Ethernet Controller
- */
- fec->eth->ecntrl &= 0xfffffffd;
-
- /*
- * Clear FIFO status registers
- */
- fec->eth->rfifo_status &= 0x00700000;
- fec->eth->tfifo_status &= 0x00700000;
-
- fec->eth->reset_cntrl = 0x01000000;
-
- /*
- * Issue a reset command to the FEC chip
- */
- fec->eth->ecntrl |= 0x1;
-
- /*
- * wait at least 16 clock cycles
- */
- udelay (10);
-
-#ifdef DEBUG
- printf ("Ethernet task stopped\n");
-#endif
-}
-
-#ifdef DEBUG
-/********************************************************************/
-
-static void tfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
- || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("tfifo: status 0x%08x\n", fec->eth->tfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->tfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->tfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->tfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->tfifo_wrptr);
- }
-}
-
-static void rfifo_print (char *devname, mpc8220_fec_priv * fec)
-{
- u16 phyAddr = CONFIG_PHY_ADDR;
- u16 phyStatus;
-
- if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
- || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) {
-
- miiphy_read (devname, phyAddr, 0x1, &phyStatus);
- printf ("\nphyStatus: 0x%04x\n", phyStatus);
- printf ("ecntrl: 0x%08x\n", fec->eth->ecntrl);
- printf ("ievent: 0x%08x\n", fec->eth->ievent);
- printf ("x_status: 0x%08x\n", fec->eth->x_status);
- printf ("rfifo: status 0x%08x\n", fec->eth->rfifo_status);
-
- printf (" control 0x%08x\n", fec->eth->rfifo_cntrl);
- printf (" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr);
- printf (" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr);
- printf (" alarm 0x%08x\n", fec->eth->rfifo_alarm);
- printf (" readptr 0x%08x\n", fec->eth->rfifo_rdptr);
- printf (" writptr 0x%08x\n", fec->eth->rfifo_wrptr);
- }
-}
-#endif /* DEBUG */
-
-/********************************************************************/
-
-static int mpc8220_fec_send (struct eth_device *dev, volatile void *eth_data,
- int data_length)
-{
- /*
- * This routine transmits one frame. This routine only accepts
- * 6-byte Ethernet addresses.
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_TBD *pTbd;
-
-#ifdef DEBUG
- printf ("tbd status: 0x%04x\n", fec->tbdBase[0].status);
- tfifo_print (dev->name, fec);
-#endif
-
- /*
- * Clear Tx BD ring at first
- */
- mpc8220_fec_tbd_scrub (fec);
-
- /*
- * Check for valid length of data.
- */
- if ((data_length > 1500) || (data_length <= 0)) {
- return -1;
- }
-
- /*
- * Check the number of vacant TxBDs.
- */
- if (fec->cleanTbdNum < 1) {
-#ifdef DEBUG
- printf ("No available TxBDs ...\n");
-#endif
- return -1;
- }
-
- /*
- * Get the first TxBD to send the mac header
- */
- pTbd = &fec->tbdBase[fec->tbdIndex];
- pTbd->dataLength = data_length;
- pTbd->dataPointer = (u32) eth_data;
- pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY;
- fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM;
-
-#ifdef DEBUG
- printf ("DMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex);
-#endif
-
- /*
- * Kick the MII i/f
- */
- if (fec->xcv_type != SEVENWIRE) {
- u16 phyStatus;
-
- miiphy_read (dev->name, 0, 0x1, &phyStatus);
- }
-
- /*
- * Enable SmartDMA transmit task
- */
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
- DMA_TASK_ENABLE (FEC_XMIT_TASK_NO);
-
-#ifdef DEBUG
- tfifo_print (dev->name, fec);
-#endif
-
-#ifdef DEBUG
- printf ("+");
-#endif
-
- fec->cleanTbdNum -= 1;
-
-#ifdef DEBUG
- printf ("smartDMA ethernet Tx task enabled\n");
-#endif
- /*
- * wait until frame is sent .
- */
- while (pTbd->status & FEC_TBD_READY) {
- udelay (10);
-#ifdef DEBUG
- printf ("TDB status = %04x\n", pTbd->status);
-#endif
- }
-
- return 0;
-}
-
-
-/********************************************************************/
-static int mpc8220_fec_recv (struct eth_device *dev)
-{
- /*
- * This command pulls one frame from the card
- */
- mpc8220_fec_priv *fec = (mpc8220_fec_priv *) dev->priv;
- FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex];
- unsigned long ievent;
- int frame_length, len = 0;
- NBUF *frame;
-
-#ifdef DEBUG
- printf ("mpc8220_fec_recv %d Start...\n", fec->rbdIndex);
- printf ("-");
-#endif
-
- /*
- * Check if any critical events have happened
- */
- ievent = fec->eth->ievent;
- fec->eth->ievent = ievent;
- if (ievent & 0x20060000) {
- /* BABT, Rx/Tx FIFO errors */
- mpc8220_fec_halt (dev);
- mpc8220_fec_init (dev, NULL);
- return 0;
- }
- if (ievent & 0x80000000) {
- /* Heartbeat error */
- fec->eth->x_cntrl |= 0x00000001;
- }
- if (ievent & 0x10000000) {
- /* Graceful stop complete */
- if (fec->eth->x_cntrl & 0x00000001) {
- mpc8220_fec_halt (dev);
- fec->eth->x_cntrl &= ~0x00000001;
- mpc8220_fec_init (dev, NULL);
- }
- }
-
- if (!(pRbd->status & FEC_RBD_EMPTY)) {
- if ((pRbd->status & FEC_RBD_LAST)
- && !(pRbd->status & FEC_RBD_ERR)
- && ((pRbd->dataLength - 4) > 14)) {
-
- /*
- * Get buffer address and size
- */
- frame = (NBUF *) pRbd->dataPointer;
- frame_length = pRbd->dataLength - 4;
-
-#if (0)
- {
- int i;
-
- printf ("recv data hdr:");
- for (i = 0; i < 14; i++)
- printf ("%x ", *(frame->head + i));
- printf ("\n");
- }
-#endif
- /*
- * Fill the buffer and pass it to upper layers
- */
-/* memcpy(buff, frame->head, 14);
- memcpy(buff + 14, frame->data, frame_length);*/
- NetReceive ((volatile uchar *) pRbd->dataPointer,
- frame_length);
- len = frame_length;
- }
- /*
- * Reset buffer descriptor as empty
- */
- mpc8220_fec_rbd_clean (fec, pRbd);
- }
- DMA_CLEAR_IEVENT (FEC_RECV_TASK_NO);
- return len;
-}
-
-
-/********************************************************************/
-int mpc8220_fec_initialize (bd_t * bis)
-{
- mpc8220_fec_priv *fec;
-
-#ifdef CONFIG_HAS_ETH1
- mpc8220_fec_priv *fec2;
-#endif
- struct eth_device *dev;
- char *tmp, *end;
- char env_enetaddr[6];
-
-#ifdef CONFIG_HAS_ETH1
- char env_enet1addr[6];
-#endif
- int i;
-
- fec = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- dev = (struct eth_device *) malloc (sizeof (*dev));
- memset (dev, 0, sizeof *dev);
-
- fec->eth = (ethernet_regs *) MMAP_FEC1;
-#ifdef CONFIG_HAS_ETH1
- fec2 = (mpc8220_fec_priv *) malloc (sizeof (*fec));
- fec2->eth = (ethernet_regs *) MMAP_FEC2;
-#endif
- fec->tbdBase = (FEC_TBD *) FEC_BD_BASE;
- fec->rbdBase =
- (FEC_RBD *) (FEC_BD_BASE + FEC_TBD_NUM * sizeof (FEC_TBD));
- fec->xcv_type = MII100;
-
- dev->priv = (void *) fec;
- dev->iobase = MMAP_FEC1;
- dev->init = mpc8220_fec_init;
- dev->halt = mpc8220_fec_halt;
- dev->send = mpc8220_fec_send;
- dev->recv = mpc8220_fec_recv;
-
- sprintf (dev->name, "FEC ETHERNET");
- eth_register (dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register (dev->name,
- fec8220_miiphy_read, fec8220_miiphy_write);
-#endif
-
- /*
- * Try to set the mac address now. The fec mac address is
- * a garbage after reset. When not using fec for booting
- * the Linux fec driver will try to work with this garbage.
- */
- tmp = getenv ("ethaddr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec, env_enetaddr);
- }
-#ifdef CONFIG_HAS_ETH1
- tmp = getenv ("eth1addr");
- if (tmp) {
- for (i = 0; i < 6; i++) {
- env_enet1addr[i] =
- tmp ? simple_strtoul (tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end + 1 : end;
- }
- mpc8220_fec_set_hwaddr (fec2, env_enet1addr);
- }
-#endif
-
- return 1;
-}
-
-/* MII-interface related functions */
-/********************************************************************/
-int fec8220_miiphy_read (char *devname, u8 phyAddr, u8 regAddr, u16 * retVal)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- /*
- * reading from any PHY's register is done by properly
- * programming the FEC's MII data register.
- */
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data =
- (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy
- | reg);
-
- /*
- * wait for the related interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Read MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear mii interrupt bit
- */
- eth->ievent = 0x00800000;
-
- /*
- * it's now safe to read the PHY's register
- */
- *retVal = (u16) eth->mii_data;
-
- return 0;
-}
-
-/********************************************************************/
-int fec8220_miiphy_write (char *devname, u8 phyAddr, u8 regAddr, u16 data)
-{
- ethernet_regs *eth = (ethernet_regs *) MMAP_FEC1;
- u32 reg; /* convenient holder for the PHY register */
- u32 phy; /* convenient holder for the PHY */
- int timeout = 0xffff;
-
- reg = regAddr << FEC_MII_DATA_RA_SHIFT;
- phy = phyAddr << FEC_MII_DATA_PA_SHIFT;
-
- eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR |
- FEC_MII_DATA_TA | phy | reg | data);
-
- /*
- * wait for the MII interrupt
- */
- while ((timeout--) && (!(eth->ievent & 0x00800000)));
-
- if (timeout == 0) {
-#ifdef DEBUG
- printf ("Write MDIO failed...\n");
-#endif
- return -1;
- }
-
- /*
- * clear MII interrupt bit
- */
- eth->ievent = 0x00800000;
-
- return 0;
-}
-
-#ifdef DEBUG
-static u32 local_crc32 (char *string, unsigned int crc_value, int len)
-{
- int i;
- char c;
- unsigned int crc, count;
-
- /*
- * crc32 algorithm
- */
- /*
- * crc = 0xffffffff; * The initialized value should be 0xffffffff
- */
- crc = crc_value;
-
- for (i = len; --i >= 0;) {
- c = *string++;
- for (count = 0; count < 8; count++) {
- if ((c & 0x01) ^ (crc & 0x01)) {
- crc >>= 1;
- crc = crc ^ 0xedb88320;
- } else {
- crc >>= 1;
- }
- c >>= 1;
- }
- }
-
- /*
- * In big endian system, do byte swaping for crc value
- */
- return crc;
-}
-#endif /* DEBUG */
-
-#endif /* CONFIG_MPC8220_FEC */
diff --git a/cpu/mpc8220/fec.h b/cpu/mpc8220/fec.h
deleted file mode 100644
index a8927fc..0000000
--- a/cpu/mpc8220/fec.h
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on mpc4200fec.h
- * (C) Copyright Motorola, Inc., 2000
- *
- * odin ethernet header file
- */
-
-#ifndef __MPC8220_FEC_H
-#define __MPC8220_FEC_H
-
-#include <common.h>
-#include <mpc8220.h>
-#include "dma.h"
-
-typedef struct ethernet_register_set {
-
-/* [10:2]addr = 00 */
-
-/* Control and status Registers (offset 000-1FF) */
-
- volatile u32 fec_id; /* MBAR_ETH + 0x000 */
- volatile u32 ievent; /* MBAR_ETH + 0x004 */
- volatile u32 imask; /* MBAR_ETH + 0x008 */
-
- volatile u32 RES0[1]; /* MBAR_ETH + 0x00C */
- volatile u32 r_des_active; /* MBAR_ETH + 0x010 */
- volatile u32 x_des_active; /* MBAR_ETH + 0x014 */
- volatile u32 r_des_active_cl; /* MBAR_ETH + 0x018 */
- volatile u32 x_des_active_cl; /* MBAR_ETH + 0x01C */
- volatile u32 ivent_set; /* MBAR_ETH + 0x020 */
- volatile u32 ecntrl; /* MBAR_ETH + 0x024 */
-
- volatile u32 RES1[6]; /* MBAR_ETH + 0x028-03C */
- volatile u32 mii_data; /* MBAR_ETH + 0x040 */
- volatile u32 mii_speed; /* MBAR_ETH + 0x044 */
- volatile u32 mii_status; /* MBAR_ETH + 0x048 */
-
- volatile u32 RES2[5]; /* MBAR_ETH + 0x04C-05C */
- volatile u32 mib_data; /* MBAR_ETH + 0x060 */
- volatile u32 mib_control; /* MBAR_ETH + 0x064 */
-
- volatile u32 RES3[6]; /* MBAR_ETH + 0x068-7C */
- volatile u32 r_activate; /* MBAR_ETH + 0x080 */
- volatile u32 r_cntrl; /* MBAR_ETH + 0x084 */
- volatile u32 r_hash; /* MBAR_ETH + 0x088 */
- volatile u32 r_data; /* MBAR_ETH + 0x08C */
- volatile u32 ar_done; /* MBAR_ETH + 0x090 */
- volatile u32 r_test; /* MBAR_ETH + 0x094 */
- volatile u32 r_mib; /* MBAR_ETH + 0x098 */
- volatile u32 r_da_low; /* MBAR_ETH + 0x09C */
- volatile u32 r_da_high; /* MBAR_ETH + 0x0A0 */
-
- volatile u32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */
- volatile u32 x_activate; /* MBAR_ETH + 0x0C0 */
- volatile u32 x_cntrl; /* MBAR_ETH + 0x0C4 */
- volatile u32 backoff; /* MBAR_ETH + 0x0C8 */
- volatile u32 x_data; /* MBAR_ETH + 0x0CC */
- volatile u32 x_status; /* MBAR_ETH + 0x0D0 */
- volatile u32 x_mib; /* MBAR_ETH + 0x0D4 */
- volatile u32 x_test; /* MBAR_ETH + 0x0D8 */
- volatile u32 fdxfc_da1; /* MBAR_ETH + 0x0DC */
- volatile u32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */
- volatile u32 paddr1; /* MBAR_ETH + 0x0E4 */
- volatile u32 paddr2; /* MBAR_ETH + 0x0E8 */
- volatile u32 op_pause; /* MBAR_ETH + 0x0EC */
-
- volatile u32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */
- volatile u32 instr_reg; /* MBAR_ETH + 0x100 */
- volatile u32 context_reg; /* MBAR_ETH + 0x104 */
- volatile u32 test_cntrl; /* MBAR_ETH + 0x108 */
- volatile u32 acc_reg; /* MBAR_ETH + 0x10C */
- volatile u32 ones; /* MBAR_ETH + 0x110 */
- volatile u32 zeros; /* MBAR_ETH + 0x114 */
- volatile u32 iaddr1; /* MBAR_ETH + 0x118 */
- volatile u32 iaddr2; /* MBAR_ETH + 0x11C */
- volatile u32 gaddr1; /* MBAR_ETH + 0x120 */
- volatile u32 gaddr2; /* MBAR_ETH + 0x124 */
- volatile u32 random; /* MBAR_ETH + 0x128 */
- volatile u32 rand1; /* MBAR_ETH + 0x12C */
- volatile u32 tmp; /* MBAR_ETH + 0x130 */
-
- volatile u32 RES6[3]; /* MBAR_ETH + 0x134-13C */
- volatile u32 fifo_id; /* MBAR_ETH + 0x140 */
- volatile u32 x_wmrk; /* MBAR_ETH + 0x144 */
- volatile u32 fcntrl; /* MBAR_ETH + 0x148 */
- volatile u32 r_bound; /* MBAR_ETH + 0x14C */
- volatile u32 r_fstart; /* MBAR_ETH + 0x150 */
- volatile u32 r_count; /* MBAR_ETH + 0x154 */
- volatile u32 r_lag; /* MBAR_ETH + 0x158 */
- volatile u32 r_read; /* MBAR_ETH + 0x15C */
- volatile u32 r_write; /* MBAR_ETH + 0x160 */
- volatile u32 x_count; /* MBAR_ETH + 0x164 */
- volatile u32 x_lag; /* MBAR_ETH + 0x168 */
- volatile u32 x_retry; /* MBAR_ETH + 0x16C */
- volatile u32 x_write; /* MBAR_ETH + 0x170 */
- volatile u32 x_read; /* MBAR_ETH + 0x174 */
-
- volatile u32 RES7[2]; /* MBAR_ETH + 0x178-17C */
- volatile u32 fm_cntrl; /* MBAR_ETH + 0x180 */
- volatile u32 rfifo_data; /* MBAR_ETH + 0x184 */
- volatile u32 rfifo_status; /* MBAR_ETH + 0x188 */
- volatile u32 rfifo_cntrl; /* MBAR_ETH + 0x18C */
- volatile u32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */
- volatile u32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */
- volatile u32 rfifo_alarm; /* MBAR_ETH + 0x198 */
- volatile u32 rfifo_rdptr; /* MBAR_ETH + 0x19C */
- volatile u32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */
- volatile u32 tfifo_data; /* MBAR_ETH + 0x1A4 */
- volatile u32 tfifo_status; /* MBAR_ETH + 0x1A8 */
- volatile u32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */
- volatile u32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */
- volatile u32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */
- volatile u32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */
- volatile u32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */
- volatile u32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */
-
- volatile u32 reset_cntrl; /* MBAR_ETH + 0x1C4 */
- volatile u32 xmit_fsm; /* MBAR_ETH + 0x1C8 */
-
- volatile u32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */
- volatile u32 rdes_data0; /* MBAR_ETH + 0x1D8 */
- volatile u32 rdes_data1; /* MBAR_ETH + 0x1DC */
- volatile u32 r_length; /* MBAR_ETH + 0x1E0 */
- volatile u32 x_length; /* MBAR_ETH + 0x1E4 */
- volatile u32 x_addr; /* MBAR_ETH + 0x1E8 */
- volatile u32 cdes_data; /* MBAR_ETH + 0x1EC */
- volatile u32 status; /* MBAR_ETH + 0x1F0 */
- volatile u32 dma_control; /* MBAR_ETH + 0x1F4 */
- volatile u32 des_cmnd; /* MBAR_ETH + 0x1F8 */
- volatile u32 data; /* MBAR_ETH + 0x1FC */
-
- /* MIB COUNTERS (Offset 200-2FF) */
-
- volatile u32 rmon_t_drop; /* MBAR_ETH + 0x200 */
- volatile u32 rmon_t_packets; /* MBAR_ETH + 0x204 */
- volatile u32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */
- volatile u32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */
- volatile u32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */
- volatile u32 rmon_t_undersize; /* MBAR_ETH + 0x214 */
- volatile u32 rmon_t_oversize; /* MBAR_ETH + 0x218 */
- volatile u32 rmon_t_frag; /* MBAR_ETH + 0x21C */
- volatile u32 rmon_t_jab; /* MBAR_ETH + 0x220 */
- volatile u32 rmon_t_col; /* MBAR_ETH + 0x224 */
- volatile u32 rmon_t_p64; /* MBAR_ETH + 0x228 */
- volatile u32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */
- volatile u32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */
- volatile u32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */
- volatile u32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */
- volatile u32 rmon_t_p1024to2047;/* MBAR_ETH + 0x23C */
- volatile u32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */
- volatile u32 rmon_t_octets; /* MBAR_ETH + 0x244 */
- volatile u32 ieee_t_drop; /* MBAR_ETH + 0x248 */
- volatile u32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */
- volatile u32 ieee_t_1col; /* MBAR_ETH + 0x250 */
- volatile u32 ieee_t_mcol; /* MBAR_ETH + 0x254 */
- volatile u32 ieee_t_def; /* MBAR_ETH + 0x258 */
- volatile u32 ieee_t_lcol; /* MBAR_ETH + 0x25C */
- volatile u32 ieee_t_excol; /* MBAR_ETH + 0x260 */
- volatile u32 ieee_t_macerr; /* MBAR_ETH + 0x264 */
- volatile u32 ieee_t_cserr; /* MBAR_ETH + 0x268 */
- volatile u32 ieee_t_sqe; /* MBAR_ETH + 0x26C */
- volatile u32 t_fdxfc; /* MBAR_ETH + 0x270 */
- volatile u32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */
-
- volatile u32 RES9[2]; /* MBAR_ETH + 0x278-27C */
- volatile u32 rmon_r_drop; /* MBAR_ETH + 0x280 */
- volatile u32 rmon_r_packets; /* MBAR_ETH + 0x284 */
- volatile u32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */
- volatile u32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */
- volatile u32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */
- volatile u32 rmon_r_undersize; /* MBAR_ETH + 0x294 */
- volatile u32 rmon_r_oversize; /* MBAR_ETH + 0x298 */
- volatile u32 rmon_r_frag; /* MBAR_ETH + 0x29C */
- volatile u32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */
-
- volatile u32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */
-
- volatile u32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */
- volatile u32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */
- volatile u32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */
- volatile u32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */
- volatile u32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */
- volatile u32 rmon_r_p1024to2047;/* MBAR_ETH + 0x2BC */
- volatile u32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */
- volatile u32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */
- volatile u32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */
- volatile u32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */
- volatile u32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */
- volatile u32 ieee_r_align; /* MBAR_ETH + 0x2D4 */
- volatile u32 r_macerr; /* MBAR_ETH + 0x2D8 */
- volatile u32 r_fdxfc; /* MBAR_ETH + 0x2DC */
- volatile u32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */
-
- volatile u32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */
-
- volatile u32 RES11[64]; /* MBAR_ETH + 0x300-3FF */
-} ethernet_regs;
-
-/* Receive & Transmit Buffer Descriptor definitions */
-typedef struct BufferDescriptor {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_RBD;
-
-typedef struct {
- u16 status;
- u16 dataLength;
- u32 dataPointer;
-} FEC_TBD;
-
-/* private structure */
-typedef enum {
- SEVENWIRE, /* 7-wire */
- MII10, /* MII 10Mbps */
- MII100 /* MII 100Mbps */
-} xceiver_type;
-
-typedef struct {
- ethernet_regs *eth;
- xceiver_type xcv_type; /* transceiver type */
- FEC_RBD *rbdBase; /* RBD ring */
- FEC_TBD *tbdBase; /* TBD ring */
- u16 rbdIndex; /* next receive BD to read */
- u16 tbdIndex; /* next transmit BD to send */
- u16 usedTbdIndex; /* next transmit BD to clean */
- u16 cleanTbdNum; /* the number of available transmit BDs */
-} mpc8220_fec_priv;
-
-/* Ethernet parameter area */
-#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00)
-#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04)
-#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08)
-#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c)
-
-/* BD Numer definitions */
-#define FEC_TBD_NUM 48 /* The user can adjust this value */
-#define FEC_RBD_NUM 32 /* The user can adjust this value */
-
-/* packet size limit */
-#define FEC_MAX_PKT_SIZE 1536
-
-/* RBD bits definitions */
-#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */
-#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_RBD_INT 0x1000 /* Interrupt */
-#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */
-#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */
-#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */
-#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */
-#define FEC_RBD_LG 0x0020 /* Frame length violation */
-#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */
-#define FEC_RBD_SH 0x0008 /* Short frame */
-#define FEC_RBD_CR 0x0004 /* CRC error */
-#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */
-#define FEC_RBD_TR 0x0001 /* Frame is truncated */
-#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \
- FEC_RBD_OV | FEC_RBD_TR)
-
-/* TBD bits definitions */
-#define FEC_TBD_READY 0x8000 /* Buffer is ready */
-#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */
-#define FEC_TBD_INT 0x1000 /* Interrupt */
-#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */
-#define FEC_TBD_TC 0x0400 /* Transmit the CRC */
-#define FEC_TBD_ABC 0x0200 /* Append bad CRC */
-
-/* MII-related definitios */
-#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */
-#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */
-#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */
-#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */
-#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */
-#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */
-#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */
-
-#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */
-#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */
-
-#endif /* __MPC8220_FEC_H */
diff --git a/cpu/mpc8220/fec_dma_tasks.S b/cpu/mpc8220/fec_dma_tasks.S
deleted file mode 100644
index 3f8a03b..0000000
--- a/cpu/mpc8220/fec_dma_tasks.S
+++ /dev/null
@@ -1,363 +0,0 @@
-/*
- * Copyright (C) 2004, Freescale Semiconductor, Inc.
- *
- * This file contains microcode for the FEC controller of the MPC8220.
- */
-
-#include <config.h>
-
-#if defined(CONFIG_MPC8220)
-
-/* sas/sccg, gas target */
-.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */
-.section smartdmaTaskTable,"aw",@progbits /* Task tables */
-.align 9
-.globl taskTable
-taskTable:
-.globl scEthernetRecv_Entry
-scEthernetRecv_Entry: /* Task 0 */
-.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */
-.long scEthernetRecv_TDT - taskTable + 0x00000094
-.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */
-.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */
-.long 0xf0000000
-.globl scEthernetXmit_Entry
-scEthernetXmit_Entry: /* Task 1 */
-.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */
-.long scEthernetXmit_TDT - taskTable + 0x000000e0
-.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */
-.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */
-.long 0x00000000
-.long 0x00000000
-.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */
-.long 0xf0000000
-
-
-.globl scEthernetRecv_TDT
-scEthernetRecv_TDT: /* Task 0 Descriptor Table */
-.long 0xc4c50000 /* 0000(153): LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */
-.long 0x84c5e000 /* 0004(153): LCD: idx1 = var9 + var11; ; idx1 += inc0 */
-.long 0x10001f08 /* 0008(156): DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000380 /* 000C(157): DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f88 /* 0010(158): DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(162): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(164): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(165): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x010cf04c /* 0020(165): DRD2B1: var4 = EU3(); EU3(var1,var12) */
-.long 0x82180349 /* 0024(169): LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */
-.long 0x81c68004 /* 0028(172): LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x70000000 /* 002C(174): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf04e /* 0030(174): DRD2B1: var6 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0034(175): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x020cf04f /* 0038(175): DRD2B1: var8 = EU3(); EU3(var1,var15) */
-.long 0x00000b88 /* 003C(176): DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0x80025184 /* 0040(205): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x86810412 /* 0044(205): LCD: idx2 = var13, idx3 = var2; idx2 < var16; idx2 += inc2, idx3 += inc2 */
-.long 0x0200cf88 /* 0048(209): DRD1A: *idx3 = *idx1; FN=0 init=16 WS=0 RS=0 */
-.long 0x80025184 /* 004C(217): LCDEXT: idx1 = 0xf0009184; ; */
-.long 0x8681845b /* 0050(217): LCD: idx2 = var13, idx3 = var3; idx2 < var17; idx2 += inc3, idx3 += inc3 */
-.long 0x0000cf88 /* 0054(221): DRD1A: *idx3 = *idx1; FN=0 init=0 WS=0 RS=0 */
-.long 0xc31883a4 /* 0058(225): LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc4 */
-.long 0x80190000 /* 005C(225): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008468 /* 0060(227): DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4038360 /* 0064(232): LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc4, idx2 += inc0 */
-.long 0x81c50000 /* 0068(233): LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */
-.long 0x1000cb18 /* 006C(235): DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 0070(236): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc418836d /* 0074(238): LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc5 */
-.long 0x83990000 /* 0078(238): LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */
-.long 0x10000c00 /* 007C(240): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x0000c800 /* 0080(241): DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 0084(245): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 0088(247): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 008C(248): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04c /* 0090(248): DRD2B1: idx0 = EU3(); EU3(var1,var12) */
-.long 0x000001f8 /* 0094(:0): NOP */
-
-
-.globl scEthernetXmit_TDT
-scEthernetXmit_TDT: /* Task 1 Descriptor Table */
-.long 0x80095b00 /* 0000(280): LCDEXT: idx0 = 0xf0025b00; ; */
-.long 0x85c60004 /* 0004(280): LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */
-.long 0x10002308 /* 0008(283): DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x10000f88 /* 000C(284): DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000380 /* 0010(285): DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */
-.long 0x81980000 /* 0014(288): LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */
-.long 0x10000780 /* 0018(290): DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 001C(291): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x024cf04d /* 0020(291): DRD2B1: var9 = EU3(); EU3(var1,var13) */
-.long 0x84980309 /* 0024(294): LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */
-.long 0xc0004003 /* 0028(297): LCDEXT: idx1 = 0x00000003; ; */
-.long 0x81c60004 /* 002C(297): LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */
-.long 0x70000000 /* 0030(299): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x010cf04e /* 0034(299): DRD2B1: var4 = EU3(); EU3(var1,var14) */
-.long 0x70000000 /* 0038(300): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x014cf04f /* 003C(300): DRD2B1: var5 = EU3(); EU3(var1,var15) */
-.long 0x70000000 /* 0040(301): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x028cf050 /* 0044(301): DRD2B1: var10 = EU3(); EU3(var1,var16) */
-.long 0x70000000 /* 0048(302): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */
-.long 0x018cf051 /* 004C(302): DRD2B1: var6 = EU3(); EU3(var1,var17) */
-.long 0x10000b90 /* 0050(303): DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 0054(304): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x01ccf0a1 /* 0058(304): DRD2B1: var7 = EU3(); EU3(var2,idx1) */
-.long 0xc2988312 /* 005C(308): LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */
-.long 0x83490000 /* 0060(308): LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */
-.long 0x00001b10 /* 0064(310): DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */
-.long 0x800251a4 /* 0068(315): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc30104dc /* 006C(315): LCDEXT: idx2 = var6, idx3 = var2; idx2 >= var19; idx2 += inc3, idx3 += inc4 */
-.long 0x839a032d /* 0070(316): LCD: idx4 = var7; idx4 == var12; idx4 += inc5 */
-.long 0x0220c798 /* 0074(321): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=0 RS=0 */
-.long 0x800251a4 /* 0078(329): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0x99198337 /* 007C(329): LCD: idx2 = idx2, idx3 = idx3; idx2 > var12; idx2 += inc6, idx3 += inc7 */
-.long 0x022ac798 /* 0080(333): DRD1A: *idx1 = *idx3; FN=0 init=17 WS=1 RS=1 */
-.long 0x800251a4 /* 0084(350): LCDEXT: idx1 = 0xf00091a4; ; */
-.long 0xc1430000 /* 0088(350): LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */
-.long 0x82998312 /* 008C(351): LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */
-.long 0x0a2ac790 /* 0090(354): DRD1A: *idx1 = *idx2; FN=0 TFD init=17 WS=1 RS=1 */
-.long 0x81988000 /* 0094(359): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x60000002 /* 0098(361): DRD2A: EU0=0 EU1=0 EU2=0 EU3=2 EXT init=0 WS=0 RS=0 */
-.long 0x0c4cfc4d /* 009C(361): DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */
-.long 0xc21883ad /* 00A0(365): LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */
-.long 0x80190000 /* 00A4(365): LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */
-.long 0x04008460 /* 00A8(367): DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */
-.long 0xc4052305 /* 00AC(371): LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */
-.long 0x81ca0000 /* 00B0(372): LCD: idx3 = var3 + var20; idx3 once var0; idx3 += inc0 */
-.long 0x1000c718 /* 00B4(374): DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00000f18 /* 00B8(375): DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */
-.long 0xc4188000 /* 00BC(378): LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */
-.long 0x85190312 /* 00C0(378): LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */
-.long 0x10000c00 /* 00C4(380): DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x1000c400 /* 00C8(381): DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x00008860 /* 00CC(382): DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */
-.long 0x81988000 /* 00D0(386): LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */
-.long 0x10000788 /* 00D4(388): DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */
-.long 0x60000000 /* 00D8(389): DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */
-.long 0x080cf04d /* 00DC(389): DRD2B1: idx0 = EU3(); EU3(var1,var13) */
-.long 0x000001f8 /* 00E0(:0): NOP */
-
-.align 8
-
-.globl scEthernetRecv_VarTab
-scEthernetRecv_VarTab: /* Task 0 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0xf0025b00 /* var[9] */
-.long 0x00000008 /* var[10] */
-.long 0x0000000c /* var[11] */
-.long 0x80000000 /* var[12] */
-.long 0x00000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x20000000 /* var[15] */
-.long 0x00000800 /* var[16] */
-.long 0x00000001 /* var[17] */
-.long 0x00000000 /* var[18] */
-.long 0x00000000 /* var[19] */
-.long 0x00000000 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x20000004 /* inc[2] */
-.long 0x20000001 /* inc[3] */
-.long 0x80000000 /* inc[4] */
-.long 0x40000000 /* inc[5] */
-.long 0x00000000 /* inc[6] */
-.long 0x00000000 /* inc[7] */
-
-.align 8
-
-.globl scEthernetXmit_VarTab
-scEthernetXmit_VarTab: /* Task 1 Variable Table */
-.long 0x00000000 /* var[0] */
-.long 0x00000000 /* var[1] */
-.long 0x00000000 /* var[2] */
-.long 0x00000000 /* var[3] */
-.long 0x00000000 /* var[4] */
-.long 0x00000000 /* var[5] */
-.long 0x00000000 /* var[6] */
-.long 0x00000000 /* var[7] */
-.long 0x00000000 /* var[8] */
-.long 0x00000000 /* var[9] */
-.long 0x00000000 /* var[10] */
-.long 0xf0025b00 /* var[11] */
-.long 0x00000000 /* var[12] */
-.long 0x80000000 /* var[13] */
-.long 0x10000000 /* var[14] */
-.long 0x08000000 /* var[15] */
-.long 0x20000000 /* var[16] */
-.long 0x0000ffff /* var[17] */
-.long 0xffffffff /* var[18] */
-.long 0x00000004 /* var[19] */
-.long 0x00000008 /* var[20] */
-.long 0x00000000 /* var[21] */
-.long 0x00000000 /* var[22] */
-.long 0x00000000 /* var[23] */
-.long 0x00000000 /* inc[0] */
-.long 0x60000000 /* inc[1] */
-.long 0x40000000 /* inc[2] */
-.long 0xc000fffc /* inc[3] */
-.long 0xe0000004 /* inc[4] */
-.long 0x80000000 /* inc[5] */
-.long 0x4000ffff /* inc[6] */
-.long 0xe0000001 /* inc[7] */
-
-.align 8
-
-.globl scEthernetRecv_FDT
-scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-.align 8
-
-.globl scEthernetXmit_FDT
-scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x21800000 /* and(), EU# 3 */
-.long 0x21e00000 /* or(), EU# 3 */
-.long 0x21400000 /* andn(), EU# 3 */
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-.long 0x00000000
-
-
-.globl scEthernetRecv_CSave
-scEthernetRecv_CSave: /* Task 0 context save space */
-.space 128, 0x0
-
-
-.globl scEthernetXmit_CSave
-scEthernetXmit_CSave: /* Task 1 context save space */
-.space 128, 0x0
-
-#endif
diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c
deleted file mode 100644
index 76ecdf1..0000000
--- a/cpu/mpc8220/i2c.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_HARD_I2C
-
-#include <mpc8220.h>
-#include <i2c.h>
-
-typedef struct mpc8220_i2c {
- volatile u32 adr; /* I2Cn + 0x00 */
- volatile u32 fdr; /* I2Cn + 0x04 */
- volatile u32 cr; /* I2Cn + 0x08 */
- volatile u32 sr; /* I2Cn + 0x0C */
- volatile u32 dr; /* I2Cn + 0x10 */
-} i2c_t;
-
-/* I2Cn control register bits */
-#define I2C_EN 0x80
-#define I2C_IEN 0x40
-#define I2C_STA 0x20
-#define I2C_TX 0x10
-#define I2C_TXAK 0x08
-#define I2C_RSTA 0x04
-#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA)
-
-/* I2Cn status register bits */
-#define I2C_CF 0x80
-#define I2C_AAS 0x40
-#define I2C_BB 0x20
-#define I2C_AL 0x10
-#define I2C_SRW 0x04
-#define I2C_IF 0x02
-#define I2C_RXAK 0x01
-
-#define I2C_TIMEOUT 100
-#define I2C_RETRIES 1
-
-struct mpc8220_i2c_tap {
- int scl2tap;
- int tap2tap;
-};
-
-static int mpc_reg_in (volatile u32 * reg);
-static void mpc_reg_out (volatile u32 * reg, int val, int mask);
-static int wait_for_bb (void);
-static int wait_for_pin (int *status);
-static int do_address (uchar chip, char rdwr_flag);
-static int send_bytes (uchar chip, char *buf, int len);
-static int receive_bytes (uchar chip, char *buf, int len);
-static int mpc_get_fdr (int);
-
-static int mpc_reg_in (volatile u32 * reg)
-{
- int ret;
- ret = *reg >> 24;
- __asm__ __volatile__ ("eieio");
- return ret;
-}
-
-static void mpc_reg_out (volatile u32 * reg, int val, int mask)
-{
- int tmp;
-
- if (!mask) {
- *reg = val << 24;
- } else {
- tmp = mpc_reg_in (reg);
- *reg = ((tmp & ~mask) | (val & mask)) << 24;
- }
- __asm__ __volatile__ ("eieio");
-
- return;
-}
-
-static int wait_for_bb (void)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
- int status;
-
- status = mpc_reg_in (&regs->sr);
-
- while (timeout-- && (status & I2C_BB)) {
-#if 1
- volatile int temp;
-
- mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
- temp = mpc_reg_in (&regs->dr);
- mpc_reg_out (&regs->cr, 0, I2C_STA);
- mpc_reg_out (&regs->cr, 0, 0);
- mpc_reg_out (&regs->cr, I2C_EN, 0);
-#endif
- udelay (1000);
- status = mpc_reg_in (&regs->sr);
- }
-
- return (status & I2C_BB);
-}
-
-static int wait_for_pin (int *status)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int timeout = I2C_TIMEOUT;
-
- *status = mpc_reg_in (&regs->sr);
-
- while (timeout-- && !(*status & I2C_IF)) {
- udelay (1000);
- *status = mpc_reg_in (&regs->sr);
- }
-
- if (!(*status & I2C_IF)) {
- return -1;
- }
-
- mpc_reg_out (&regs->sr, 0, I2C_IF);
- return 0;
-}
-
-static int do_address (uchar chip, char rdwr_flag)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int status;
-
- chip <<= 1;
-
- if (rdwr_flag)
- chip |= 1;
-
- mpc_reg_out (&regs->cr, I2C_TX, I2C_TX);
- mpc_reg_out (&regs->dr, chip, 0);
-
- if (wait_for_pin (&status))
- return -2;
- if (status & I2C_RXAK)
- return -3;
- return 0;
-}
-
-static int send_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int wrcount;
- int status;
-
- for (wrcount = 0; wrcount < len; ++wrcount) {
-
- mpc_reg_out (&regs->dr, buf[wrcount], 0);
-
- if (wait_for_pin (&status))
- break;
-
- if (status & I2C_RXAK)
- break;
-
- }
-
- return !(wrcount == len);
- return 0;
-}
-
-static int receive_bytes (uchar chip, char *buf, int len)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int dummy = 1;
- int rdcount = 0;
- int status;
- int i;
-
- mpc_reg_out (&regs->cr, 0, I2C_TX);
-
- for (i = 0; i < len; ++i) {
- buf[rdcount] = mpc_reg_in (&regs->dr);
-
- if (dummy)
- dummy = 0;
- else
- rdcount++;
-
- if (wait_for_pin (&status))
- return -4;
- }
-
- mpc_reg_out (&regs->cr, I2C_TXAK, I2C_TXAK);
- buf[rdcount++] = mpc_reg_in (&regs->dr);
-
- if (wait_for_pin (&status))
- return -5;
-
- mpc_reg_out (&regs->cr, 0, I2C_TXAK);
- return 0;
-}
-
-/**************** I2C API ****************/
-
-void i2c_init (int speed, int saddr)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
-
- mpc_reg_out (&regs->cr, 0, 0);
- mpc_reg_out (&regs->adr, saddr << 1, 0);
-
- /* Set clock
- */
- mpc_reg_out (&regs->fdr, mpc_get_fdr (speed), 0);
-
- /* Enable module
- */
- mpc_reg_out (&regs->cr, I2C_EN, I2C_INIT_MASK);
- mpc_reg_out (&regs->sr, 0, I2C_IF);
- return;
-}
-
-static int mpc_get_fdr (int speed)
-{
- static int fdr = -1;
-
- if (fdr == -1) {
- ulong best_speed = 0;
- ulong divider;
- ulong ipb, scl;
- ulong bestmatch = 0xffffffffUL;
- int best_i = 0, best_j = 0, i, j;
- int SCL_Tap[] = { 9, 10, 12, 15, 5, 6, 7, 8 };
- struct mpc8220_i2c_tap scltap[] = {
- {4, 1},
- {4, 2},
- {6, 4},
- {6, 8},
- {14, 16},
- {30, 32},
- {62, 64},
- {126, 128}
- };
-
- ipb = gd->bus_clk;
- for (i = 7; i >= 0; i--) {
- for (j = 7; j >= 0; j--) {
- scl = 2 * (scltap[j].scl2tap +
- (SCL_Tap[i] -
- 1) * scltap[j].tap2tap + 2);
- if (ipb <= speed * scl) {
- if ((speed * scl - ipb) < bestmatch) {
- bestmatch = speed * scl - ipb;
- best_i = i;
- best_j = j;
- best_speed = ipb / scl;
- }
- }
- }
- }
- divider = (best_i & 3) | ((best_i & 4) << 3) | (best_j << 2);
- if (gd->flags & GD_FLG_RELOC) {
- fdr = divider;
- } else {
- printf ("%ld kHz, ", best_speed / 1000);
- return divider;
- }
- }
-
- return fdr;
-}
-
-int i2c_probe (uchar chip)
-{
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int i;
-
- for (i = 0; i < I2C_RETRIES; i++) {
- mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
-
- if (!do_address (chip, 0)) {
- mpc_reg_out (&regs->cr, 0, I2C_STA);
- break;
- }
-
- mpc_reg_out (&regs->cr, 0, I2C_STA);
- udelay (50);
- }
-
- return (i == I2C_RETRIES);
-}
-
-int i2c_read (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_read: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_read: send_bytes failed\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->cr, I2C_RSTA, I2C_RSTA);
- if (do_address (chip, 1)) {
- printf ("i2c_read: failed to address chip\n");
- goto Done;
- }
-
- if (receive_bytes (chip, (char *)buf, len)) {
- printf ("i2c_read: receive_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (&regs->cr, 0, I2C_STA);
- return ret;
-}
-
-int i2c_write (uchar chip, uint addr, int alen, uchar * buf, int len)
-{
- uchar xaddr[4];
- i2c_t *regs = (i2c_t *) MMAP_I2C;
- int ret = -1;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
- if (wait_for_bb ()) {
- printf ("i2c_write: bus is busy\n");
- goto Done;
- }
-
- mpc_reg_out (&regs->cr, I2C_STA, I2C_STA);
- if (do_address (chip, 0)) {
- printf ("i2c_write: failed to address chip\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)&xaddr[4 - alen], alen)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- if (send_bytes (chip, (char *)buf, len)) {
- printf ("i2c_write: send_bytes failed\n");
- goto Done;
- }
-
- ret = 0;
- Done:
- mpc_reg_out (&regs->cr, 0, I2C_STA);
- return ret;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8220/i2cCore.c b/cpu/mpc8220/i2cCore.c
deleted file mode 100644
index b89ad03..0000000
--- a/cpu/mpc8220/i2cCore.c
+++ /dev/null
@@ -1,627 +0,0 @@
-/* I2cCore.c - MPC8220 PPC I2C Library */
-
-/* Copyright 2004 Freescale Semiconductor, Inc. */
-
-/*
-modification history
---------------------
-01c,29jun04,tcl 1.3 removed CR. Added two bytes offset support.
-01b,19jan04,tcl 1.2 removed i2cMsDelay and sysDecGet. renamed i2cMsDelay
- back to sysMsDelay
-01a,19jan04,tcl 1.1 created and seperated from i2c.c
-*/
-
-/*
-DESCRIPTION
-This file contain I2C low level handling library functions
-*/
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <vxWorks.h>
-#include <sysLib.h>
-#include <iosLib.h>
-#include <logLib.h>
-#include <tickLib.h>
-
-/* BSP Includes */
-#include "config.h"
-#include "mpc8220.h"
-#include "i2cCore.h"
-
-#ifdef DEBUG_I2CCORE
-int I2CCDbg = 0;
-#endif
-
-#define ABS(x) ((x < 0)? -x : x)
-
-char *I2CERR[16] = {
- "Transfer in Progress\n", /* 0 */
- "Transfer complete\n",
- "Not Addressed\n", /* 2 */
- "Addressed as a slave\n",
- "Bus is Idle\n", /* 4 */
- "Bus is busy\n",
- "Arbitration Lost\n", /* 6 */
- "Arbitration on Track\n",
- "Slave receive, master writing to slave\n", /* 8 */
- "Slave transmit, master reading from slave\n",
- "Interrupt is pending\n", /* 10 */
- "Interrupt complete\n",
- "Acknowledge received\n", /* 12 */
- "No acknowledge received\n",
- "Unknown status\n", /* 14 */
- "\n"
-};
-
-/******************************************************************************
- *
- * chk_status - Check I2C status bit
- *
- * RETURNS: OK, or ERROR if the bit encounter
- *
- */
-
-STATUS chk_status (PSI2C pi2c, UINT8 sta_bit, UINT8 truefalse)
-{
- int i, status = 0;
-
- for (i = 0; i < I2C_POLL_COUNT; i++) {
- if ((pi2c->sr & sta_bit) == (truefalse ? sta_bit : 0))
- return (OK);
- }
-
- I2CCDBG (L2, ("--- sr %x stabit %x truefalse %d\n",
- pi2c->sr, sta_bit, truefalse, 0, 0, 0));
-
- if (i == I2C_POLL_COUNT) {
- switch (sta_bit) {
- case I2C_STA_CF:
- status = 0;
- break;
- case I2C_STA_AAS:
- status = 2;
- break;
- case I2C_STA_BB:
- status = 4;
- break;
- case I2C_STA_AL:
- status = 6;
- break;
- case I2C_STA_SRW:
- status = 8;
- break;
- case I2C_STA_IF:
- status = 10;
- break;
- case I2C_STA_RXAK:
- status = 12;
- break;
- default:
- status = 14;
- break;
- }
-
- if (!truefalse)
- status++;
-
- I2CCDBG (NO, ("--- status %d\n", status, 0, 0, 0, 0, 0));
- I2CCDBG (NO, (I2CERR[status], 0, 0, 0, 0, 0, 0));
- }
-
- return (ERROR);
-}
-
-/******************************************************************************
- *
- * I2C Enable - Enable the I2C Controller
- *
- */
-STATUS i2c_enable (SI2C * pi2c, PI2CSET pi2cSet)
-{
- int fdr = pi2cSet->bit_rate;
- UINT8 adr = pi2cSet->i2c_adr;
-
- I2CCDBG (L2, ("i2c_enable fdr %d adr %x\n", fdr, adr, 0, 0, 0, 0));
-
- i2c_clear (pi2c); /* Clear FDR, ADR, SR and CR reg */
-
- SetI2cFDR (pi2c, fdr); /* Frequency */
- pi2c->adr = adr;
-
- pi2c->cr = I2C_CTL_EN; /* Set Enable */
-
- /*
- The I2C bus should be in Idle state. If the bus is busy,
- clear the STA bit in control register
- */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK) {
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- /* Check again if it is still busy, return error if found */
- if (chk_status (pi2c, I2C_STA_BB, 1) == OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Disable - Disable the I2C Controller
- *
- */
-STATUS i2c_disable (PSI2C pi2c)
-{
- i2c_clear (pi2c);
-
- pi2c->cr &= I2C_CTL_EN; /* Disable I2c */
-
- if ((pi2c->cr & I2C_CTL_STA) == I2C_CTL_STA)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * I2C Clear - Clear the I2C Controller
- *
- */
-STATUS i2c_clear (PSI2C pi2c)
-{
- pi2c->adr = 0;
- pi2c->fdr = 0;
- pi2c->cr = 0;
- pi2c->sr = 0;
-
- return (OK);
-}
-
-
-STATUS i2c_start (PSI2C pi2c, PI2CSET pi2cSet)
-{
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
-#if 1
- UINT8 tmp = 0;
-#endif
- UINT8 Addr = pi2cSet->slv_adr;
-
- pi2c->cr |= I2C_CTL_STA; /* Generate start signal */
-
- if (chk_status (pi2c, I2C_STA_BB, 1) != OK)
- return ERROR;
-
- /* Write slave address */
- if (i2c_writebyte (pi2c, &Addr) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#ifdef TWOBYTES
-# if 0
- /* Issue the offset to start */
- if (i2c_write2byte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
- tmp = (ByteOffset >> 8) & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
- tmp = ByteOffset & 0xff;
- if (i2c_writebyte (pi2c, &tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#else
- if (i2c_writebyte (pi2c, &ByteOffset) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-#endif
-
- return (OK);
-}
-
-STATUS i2c_stop (PSI2C pi2c)
-{
- pi2c->cr &= ~I2C_CTL_STA; /* Generate stop signal */
- if (chk_status (pi2c, I2C_STA_BB, 0) != OK)
- return ERROR;
-
- return (OK);
-}
-
-/******************************************************************************
- *
- * Read Len bytes to the location pointed to by *Data from the device
- * with address Addr.
- */
-int i2c_readblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int i = 0;
- UINT8 Tmp;
-
-/* UINT8 ByteOffset = pi2cSet->str_adr; not used? */
- UINT8 Addr = pi2cSet->slv_adr;
- int Length = pi2cSet->xfer_size;
-
- I2CCDBG (L1, ("i2c_readblock addr %x data 0x%08x len %d offset %d\n",
- Addr, (int) Data, Length, ByteOffset, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) { /* Check if Arbitration lost */
- I2CCDBG (FN, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear Arbitration status bit */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- pi2c->cr |= I2C_CTL_RSTA; /* Repeat Start */
-
- Tmp = Addr | 1;
-
- if (i2c_writebyte (pi2c, &Tmp) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- pi2c->cr &= ~I2C_CTL_TX; /* Set receive mode */
-
- if (((pi2c->sr & 0x07) == 0x07) || (pi2c->sr & 0x01))
- return ERROR;
-
- /* Dummy Read */
- if (i2c_readbyte (pi2c, &Tmp, &i) != OK) {
- i2c_stop (pi2c); /* Disable I2c */
- return ERROR;
- }
-
- i = 0;
- while (Length) {
- if (Length == 2)
- pi2c->cr |= I2C_CTL_TXAK;
-
- if (Length == 1)
- pi2c->cr &= ~I2C_CTL_STA;
-
- if (i2c_readbyte (pi2c, Data, &Length) != OK) {
- return i2c_stop (pi2c);
- }
- i++;
- Length--;
- Data++;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- return i;
-}
-
-STATUS i2c_writeblock (SI2C * pi2c, PI2CSET pi2cSet, UINT8 * Data)
-{
- int Length = pi2cSet->xfer_size;
-
-#ifdef TWOBYTES
- UINT16 ByteOffset = pi2cSet->str_adr;
-#else
- UINT8 ByteOffset = pi2cSet->str_adr;
-#endif
- int j, k;
-
- I2CCDBG (L2, ("i2c_writeblock\n", 0, 0, 0, 0, 0, 0));
-
- if (pi2c->sr & I2C_STA_AL) {
- /* Check if arbitration lost */
- I2CCDBG (L2, ("Arbitration lost\n", 0, 0, 0, 0, 0, 0));
- pi2c->sr &= ~I2C_STA_AL; /* Clear the condition */
- return ERROR;
- }
-
- pi2c->cr |= I2C_CTL_TX; /* Enable the I2c for TX, Ack */
-
- /* Do the not even offset first */
- if ((ByteOffset % 8) != 0) {
- int remain;
-
- if (Length > 8) {
- remain = 8 - (ByteOffset % 8);
- Length -= remain;
-
- pi2cSet->str_adr = ByteOffset;
-
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
-
- for (j = ByteOffset; j < remain; j++) {
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
- }
-
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (32);
-
- /* Update the new ByteOffset */
- ByteOffset += remain;
- }
- }
-
- for (j = ByteOffset, k = 0; j < (Length + ByteOffset); j++) {
- if ((j % 8) == 0) {
- pi2cSet->str_adr = j;
- if (i2c_start (pi2c, pi2cSet) == ERROR)
- return ERROR;
- }
-
- k++;
-
- if (i2c_writebyte (pi2c, Data++) != OK)
- return ERROR;
-
- if ((j == (Length - 1)) || ((k % 8) == 0)) {
- if (i2c_stop (pi2c) == ERROR)
- return ERROR;
-
- sysMsDelay (50);
- }
-
- }
-
- return k;
-}
-
-STATUS i2c_readbyte (SI2C * pi2c, UINT8 * readb, int *index)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt Bit */
- *readb = pi2c->dr; /* Read a byte */
-
- /*
- Set I2C_CTRL_TXAK will cause Transfer pending and
- set I2C_CTRL_STA will cause Interrupt pending
- */
- if (*index != 2) {
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
- }
-
- if (*index != 1) {
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
- }
-
- return (OK);
-}
-
-
-STATUS i2c_writebyte (SI2C * pi2c, UINT8 * writeb)
-{
- pi2c->sr &= ~I2C_STA_IF; /* Clear Interrupt */
- pi2c->dr = *writeb; /* Write a byte */
-
- if (chk_status (pi2c, I2C_STA_CF, 1) != OK) /* Transfer not complete? */
- return ERROR;
-
- if (chk_status (pi2c, I2C_STA_IF, 1) != OK)
- return ERROR;
-
- return OK;
-}
-
-STATUS i2c_write2byte (SI2C * pi2c, UINT16 * writeb)
-{
- UINT8 data;
-
- data = (UINT8) ((*writeb >> 8) & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- data = (UINT8) (*writeb & 0xff);
- if (i2c_writebyte (pi2c, &data) != OK)
- return ERROR;
- return OK;
-}
-
-/* FDR table base on 33MHz - more detail please refer to Odini2c_dividers.xls
-FDR FDR scl sda scl2tap2
-510 432 tap tap tap tap scl_per sda_hold I2C Freq 0 1 2 3 4 5
-000 000 9 3 4 1 28 Clocks 9 Clocks 1190 KHz 0 0 0 0 0 0
-000 001 9 3 4 2 44 Clocks 11 Clocks 758 KHz 0 0 1 0 0 0
-000 010 9 3 6 4 80 Clocks 17 Clocks 417 KHz 0 0 0 1 0 0
-000 011 9 3 6 8 144 Clocks 25 Clocks 231 KHz 0 0 1 1 0 0
-000 100 9 3 14 16 288 Clocks 49 Clocks 116 KHz 0 0 0 0 1 0
-000 101 9 3 30 32 576 Clocks 97 Clocks 58 KHz 0 0 1 0 1 0
-000 110 9 3 62 64 1152 Clocks 193 Clocks 29 KHz 0 0 0 1 1 0
-000 111 9 3 126 128 2304 Clocks 385 Clocks 14 KHz 0 0 1 1 1 0
-001 000 10 3 4 1 30 Clocks 9 Clocks 1111 KHz1 0 0 0 0 0
-001 001 10 3 4 2 48 Clocks 11 Clocks 694 KHz 1 0 1 0 0 0
-001 010 10 3 6 4 88 Clocks 17 Clocks 379 KHz 1 0 0 1 0 0
-001 011 10 3 6 8 160 Clocks 25 Clocks 208 KHz 1 0 1 1 0 0
-001 100 10 3 14 16 320 Clocks 49 Clocks 104 KHz 1 0 0 0 1 0
-001 101 10 3 30 32 640 Clocks 97 Clocks 52 KHz 1 0 1 0 1 0
-001 110 10 3 62 64 1280 Clocks 193 Clocks 26 KHz 1 0 0 1 1 0
-001 111 10 3 126 128 2560 Clocks 385 Clocks 13 KHz 1 0 1 1 1 0
-010 000 12 4 4 1 34 Clocks 10 Clocks 980 KHz 0 1 0 0 0 0
-010 001 12 4 4 2 56 Clocks 13 Clocks 595 KHz 0 1 1 0 0 0
-010 010 12 4 6 4 104 Clocks 21 Clocks 321 KHz 0 1 0 1 0 0
-010 011 12 4 6 8 192 Clocks 33 Clocks 174 KHz 0 1 1 1 0 0
-010 100 12 4 14 16 384 Clocks 65 Clocks 87 KHz 0 1 0 0 1 0
-010 101 12 4 30 32 768 Clocks 129 Clocks 43 KHz 0 1 1 0 1 0
-010 110 12 4 62 64 1536 Clocks 257 Clocks 22 KHz 0 1 0 1 1 0
-010 111 12 4 126 128 3072 Clocks 513 Clocks 11 KHz 0 1 1 1 1 0
-011 000 15 4 4 1 40 Clocks 10 Clocks 833 KHz 1 1 0 0 0 0
-011 001 15 4 4 2 68 Clocks 13 Clocks 490 KHz 1 1 1 0 0 0
-011 010 15 4 6 4 128 Clocks 21 Clocks 260 KHz 1 1 0 1 0 0
-011 011 15 4 6 8 240 Clocks 33 Clocks 139 KHz 1 1 1 1 0 0
-011 100 15 4 14 16 480 Clocks 65 Clocks 69 KHz 1 1 0 0 1 0
-011 101 15 4 30 32 960 Clocks 129 Clocks 35 KHz 1 1 1 0 1 0
-011 110 15 4 62 64 1920 Clocks 257 Clocks 17 KHz 1 1 0 1 1 0
-011 111 15 4 126 128 3840 Clocks 513 Clocks 9 KHz 1 1 1 1 1 0
-100 000 5 1 4 1 20 Clocks 7 Clocks 1667 KHz 0 0 0 0 0 1
-100 001 5 1 4 2 28 Clocks 7 Clocks 1190 KHz 0 0 1 0 0 1
-100 010 5 1 6 4 48 Clocks 9 Clocks 694 KHz 0 0 0 1 0 1
-100 011 5 1 6 8 80 Clocks 9 Clocks 417 KHz 0 0 1 1 0 1
-100 100 5 1 14 16 160 Clocks 17 Clocks 208 KHz 0 0 0 0 1 1
-100 101 5 1 30 32 320 Clocks 33 Clocks 104 KHz 0 0 1 0 1 1
-100 110 5 1 62 64 640 Clocks 65 Clocks 52 KHz 0 0 0 1 1 1
-100 111 5 1 126 128 1280 Clocks 129 Clocks 26 KHz 0 0 1 1 1 1
-101 000 6 1 4 1 22 Clocks 7 Clocks 1515 KHz 1 0 0 0 0 1
-101 001 6 1 4 2 32 Clocks 7 Clocks 1042 KHz 1 0 1 0 0 1
-101 010 6 1 6 4 56 Clocks 9 Clocks 595 KHz 1 0 0 1 0 1
-101 011 6 1 6 8 96 Clocks 9 Clocks 347 KHz 1 0 1 1 0 1
-101 100 6 1 14 16 192 Clocks 17 Clocks 174 KHz 1 0 0 0 1 1
-101 101 6 1 30 32 384 Clocks 33 Clocks 87 KHz 1 0 1 0 1 1
-101 110 6 1 62 64 768 Clocks 65 Clocks 43 KHz 1 0 0 1 1 1
-101 111 6 1 126 128 1536 Clocks 129 Clocks 22 KHz 1 0 1 1 1 1
-110 000 7 2 4 1 24 Clocks 8 Clocks 1389 KHz 0 1 0 0 0 1
-110 001 7 2 4 2 36 Clocks 9 Clocks 926 KHz 0 1 1 0 0 1
-110 010 7 2 6 4 64 Clocks 13 Clocks 521 KHz 0 1 0 1 0 1
-110 011 7 2 6 8 112 Clocks 17 Clocks 298 KHz 0 1 1 1 0 1
-110 100 7 2 14 16 224 Clocks 33 Clocks 149 KHz 0 1 0 0 1 1
-110 101 7 2 30 32 448 Clocks 65 Clocks 74 KHz 0 1 1 0 1 1
-110 110 7 2 62 64 896 Clocks 129 Clocks 37 KHz 0 1 0 1 1 1
-110 111 7 2 126 128 1792 Clocks 257 Clocks 19 KHz 0 1 1 1 1 1
-111 000 8 2 4 1 26 Clocks 8 Clocks 1282 KHz 1 1 0 0 0 1
-111 001 8 2 4 2 40 Clocks 9 Clocks 833 KHz 1 1 1 0 0 1
-111 010 8 2 6 4 72 Clocks 13 Clocks 463 KHz 1 1 0 1 0 1
-111 011 8 2 6 8 128 Clocks 17 Clocks 260 KHz 1 1 1 1 0 1
-111 100 8 2 14 16 256 Clocks 33 Clocks 130 KHz 1 1 0 0 1 1
-111 101 8 2 30 32 512 Clocks 65 Clocks 65 KHz 1 1 1 0 1 1
-111 110 8 2 62 64 1024 Clocks 129 Clocks 33 KHz 1 1 0 1 1 1
-111 111 8 2 126 128 2048 Clocks 257 Clocks 16 KHz 1 1 1 1 1 1
-*/
-STATUS SetI2cFDR (PSI2C pi2cRegs, int bitrate)
-{
-/* Constants */
- const UINT8 div_hold[8][3] = { {9, 3}, {10, 3},
- {12, 4}, {15, 4},
- {5, 1}, {6, 1},
- {7, 2}, {8, 2}
- };
-
- const UINT8 scl_tap[8][2] = { {4, 1}, {4, 2},
- {6, 4}, {6, 8},
- {14, 16}, {30, 32},
- {62, 64}, {126, 128}
- };
-
- UINT8 mfdr_bits;
-
- int i = 0;
- int j = 0;
-
- int Diff, min;
- int WhichFreq, iRec, jRec;
- int SCL_Period;
- int SCL_Hold;
- int I2C_Freq;
-
- I2CCDBG (L2, ("Entering getBitRate: bitrate %d pi2cRegs 0x%08x\n",
- bitrate, (int) pi2cRegs, 0, 0, 0, 0));
-
- if (bitrate < 0) {
- I2CCDBG (NO, ("Invalid bitrate\n", 0, 0, 0, 0, 0, 0));
- return ERROR;
- }
-
- /* Initialize */
- mfdr_bits = 0;
- min = 0x7fffffff;
- WhichFreq = iRec = jRec = 0;
-
- for (i = 0; i < 8; i++) {
- for (j = 0; j < 8; j++) {
- /* SCL Period = 2 * (scl2tap + [(SCL_Tap - 1) * tap2tap] + 2)
- * SCL Hold = scl2tap + ((SDA_Tap - 1) * tap2tap) + 3
- * Bit Rate (I2C Freq) = System Freq / SCL Period
- */
- SCL_Period =
- 2 * (scl_tap[i][0] +
- ((div_hold[j][0] - 1) * scl_tap[i][1]) +
- 2);
-
- /* Now get the I2C Freq */
- I2C_Freq = DEV_CLOCK_FREQ / SCL_Period;
-
- /* Take equal or slower */
- if (I2C_Freq > bitrate)
- continue;
-
- /* Take the differences */
- Diff = I2C_Freq - bitrate;
-
- Diff = ABS (Diff);
-
- /* Find the closer value */
- if (Diff < min) {
- min = Diff;
- WhichFreq = I2C_Freq;
- iRec = i;
- jRec = j;
- }
-
- I2CCDBG (L2,
- ("--- (%d,%d) I2C_Freq %d minDiff %d min %d\n",
- i, j, I2C_Freq, Diff, min, 0));
- }
- }
-
- SCL_Period =
- 2 * (scl_tap[iRec][0] +
- ((div_hold[jRec][0] - 1) * scl_tap[iRec][1]) + 2);
-
- I2CCDBG (L2, ("\nmin %d WhichFreq %d iRec %d jRec %d\n",
- min, WhichFreq, iRec, jRec, 0, 0));
- I2CCDBG (L2, ("--- scl2tap %d SCL_Tap %d tap2tap %d\n",
- scl_tap[iRec][0], div_hold[jRec][0], scl_tap[iRec][1],
- 0, 0, 0));
-
- /* This may no require */
- SCL_Hold =
- scl_tap[iRec][0] +
- ((div_hold[jRec][1] - 1) * scl_tap[iRec][1]) + 3;
- I2CCDBG (L2,
- ("--- SCL_Period %d SCL_Hold %d\n", SCL_Period, SCL_Hold, 0,
- 0, 0, 0));
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- /* FDR 4,3,2 */
- if ((iRec & 1) == 1)
- mfdr_bits |= 0x04; /* FDR 2 */
- if ((iRec & 2) == 2)
- mfdr_bits |= 0x08; /* FDR 3 */
- if ((iRec & 4) == 4)
- mfdr_bits |= 0x10; /* FDR 4 */
- /* FDR 5,1,0 */
- if ((jRec & 1) == 1)
- mfdr_bits |= 0x01; /* FDR 0 */
- if ((jRec & 2) == 2)
- mfdr_bits |= 0x02; /* FDR 1 */
- if ((jRec & 4) == 4)
- mfdr_bits |= 0x20; /* FDR 5 */
-
- I2CCDBG (L2, ("--- mfdr_bits %x\n", mfdr_bits, 0, 0, 0, 0, 0));
-
- pi2cRegs->fdr = mfdr_bits;
-
- return OK;
-}
diff --git a/cpu/mpc8220/i2cCore.h b/cpu/mpc8220/i2cCore.h
deleted file mode 100644
index 72783fd..0000000
--- a/cpu/mpc8220/i2cCore.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * i2cCore.h
- *
- * Prototypes, etc. for the Motorola MPC8220
- * embedded cpu chips
- *
- * 2004 (c) Freescale, Inc.
- * Author: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __INCi2ccoreh
-#define __INCi2ccoreh
-#ifndef __ASSEMBLY__
-/* device types */
-#define I2C_DEVICE_TYPE_EEPROM 0
-#define I2C_EEPROM_ADRS 0xa0
-#define I2C_CTRL_ADRS I2C_EEPROM_ADRS
-#define EEPROM_ADDR0 0xA2 /* on Dimm SPD eeprom */
-#define EEPROM_ADDR1 0xA4 /* on Board SPD eeprom */
-#define EEPROM_ADDR2 0xD2 /* non-standard eeprom - clock generator */
-/* Control Register */
-#define I2C_CTL_EN 0x80 /* I2C Enable */
-#define I2C_CTL_IEN 0x40 /* I2C Interrupt Enable */
-#define I2C_CTL_STA 0x20 /* Master/Slave Mode select */
-#define I2C_CTL_TX 0x10 /* Transmit/Receive Mode Select */
-#define I2C_CTL_TXAK 0x08 /* Transmit Acknowledge Enable */
-#define I2C_CTL_RSTA 0x04 /* Repeat Start */
-/* Status Register */
-#define I2C_STA_CF 0x80 /* Data Transfer */
-#define I2C_STA_AAS 0x40 /* Adressed As Slave */
-#define I2C_STA_BB 0x20 /* Bus Busy */
-#define I2C_STA_AL 0x10 /* Arbitration Lost */
-#define I2C_STA_SRW 0x04 /* Slave Read/Write */
-#define I2C_STA_IF 0x02 /* I2C Interrupt */
-#define I2C_STA_RXAK 0x01 /* Receive Acknowledge */
-/* Interrupt Contol Register */
-#define I2C_INT_BNBE2 0x80 /* Bus Not Busy Enable 2 */
-#define I2C_INT_TE2 0x40 /* Transmit Enable 2 */
-#define I2C_INT_RE2 0x20 /* Receive Enable 2 */
-#define I2C_INT_IE2 0x10 /* Interrupt Enable 2 */
-#define I2C_INT_BNBE1 0x08 /* Bus Not Busy Enable 1 */
-#define I2C_INT_TE1 0x04 /* Transmit Enable 1 */
-#define I2C_INT_RE1 0x02 /* Receive Enable 1 */
-#define I2C_INT_IE1 0x01 /* Interrupt Enable 1 */
-#define I2C_POLL_COUNT 0x100000
-#define I2C_ENABLE 0x00000001
-#define I2C_DISABLE 0x00000002
-#define I2C_START 0x00000004
-#define I2C_REPSTART 0x00000008
-#define I2C_STOP 0x00000010
-#define I2C_BITRATE 0x00000020
-#define I2C_SLAVEADR 0x00000040
-#define I2C_STARTADR 0x00000080
-#undef TWOBYTES
-typedef struct i2c_settings {
- /* Device settings */
- int bit_rate; /* Device bit rate */
- u8 i2c_adr; /* I2C address */
- u8 slv_adr; /* Slave address */
-#ifdef TWOBYTES
- u16 str_adr; /* Start address */
-#else
- u8 str_adr; /* Start address */
-#endif
- int xfer_size; /* Transfer Size */
-
- int bI2c_en; /* Enable or Disable */
- int cmdFlag; /* I2c Command Flags */
-} i2cset_t;
-
-/*
-int check_status(PSI2C pi2c, u8 sta_bit, u8 truefalse);
-int i2c_enable(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_disable(PSI2C pi2c);
-int i2c_start(PSI2C pi2c, PI2CSET pi2cSet);
-int i2c_stop(PSI2C pi2c);
-int i2c_clear(PSI2C pi2c);
-int i2c_readblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_writeblock (PSI2C pi2c, PI2CSET pi2cSet, u8 *Data);
-int i2c_readbyte(PSI2C pi2c, u8 *readb, int *index);
-int i2c_writebyte(PSI2C pi2c, u8 *writeb);
-int SetI2cFDR( PSI2C pi2cRegs, int bitrate );
-*/
-#endif /* __ASSEMBLY__ */
-
-#endif /* __INCi2ccoreh */
diff --git a/cpu/mpc8220/interrupts.c b/cpu/mpc8220/interrupts.c
deleted file mode 100644
index 78e9917..0000000
--- a/cpu/mpc8220/interrupts.c
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- * (C) Copyright -2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2001
- * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * interrupts.c - just enough support for the decrementer/timer
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <command.h>
-
-int interrupt_init_cpu (ulong * decrementer_count)
-{
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- puts ("external_interrupt (oops!)\n");
-}
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-/*
- * Install and free a interrupt handler.
- */
-
-void irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/****************************************************************************/
-
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- puts ("IRQ related functions are unimplemented currently.\n");
-}
diff --git a/cpu/mpc8220/io.S b/cpu/mpc8220/io.S
deleted file mode 100644
index 5ecdf55..0000000
--- a/cpu/mpc8220/io.S
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Andreas Heppel <aheppel@sysgo.de>
- * Copyright (C) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <ppc_asm.tmpl>
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0(3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/* ------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,0,r3
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0(r3)
- sync
- blr
-
-/* ------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/* ------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,0,r3
- sync
- blr
diff --git a/cpu/mpc8220/loadtask.c b/cpu/mpc8220/loadtask.c
deleted file mode 100644
index 6d8b627..0000000
--- a/cpu/mpc8220/loadtask.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * This file is based on code
- * (C) Copyright Motorola, Inc., 2000
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-/* Multichannel DMA microcode */
-extern int taskTable;
-
-void loadtask (int basetask, int tasks)
-{
- int *sram = (int *) (MMAP_SRAM + 512);
- int *task_org = &taskTable;
- unsigned int start, offset, end;
- int i;
-
-#ifdef DEBUG
- printf ("basetask = %d, tasks = %d\n", basetask, tasks);
- printf ("task_org = 0x%08x\n", (unsigned int) task_org);
-#endif
-
- /* setup TaskBAR register */
- *(vu_long *) MMAP_DMA = (MMAP_SRAM + 512);
-
- /* relocate task table entries */
- offset = (unsigned int) sram;
- for (i = basetask; i < basetask + tasks; i++) {
- sram[i * 8 + 0] = task_org[i * 8 + 0] + offset;
- sram[i * 8 + 1] = task_org[i * 8 + 1] + offset;
- sram[i * 8 + 2] = task_org[i * 8 + 2] + offset;
- sram[i * 8 + 3] = task_org[i * 8 + 3] + offset;
- sram[i * 8 + 4] = task_org[i * 8 + 4];
- sram[i * 8 + 5] = task_org[i * 8 + 5];
- sram[i * 8 + 6] = task_org[i * 8 + 6] + offset;
- sram[i * 8 + 7] = task_org[i * 8 + 7];
- }
-
- /* relocate task descriptors */
- start = (sram[basetask * 8] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int) sram);
-
-#ifdef DEBUG
- printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end);
-#endif
-
- start /= 4;
- end /= 4;
- for (i = start; i <= end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate variables */
- start = (sram[basetask * 8 + 2] - (unsigned int) sram);
- end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- /* relocate function decriptors */
- start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int) sram);
- end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 -
- (unsigned int) sram);
- start /= 4;
- end /= 4;
- for (i = start; i < end; i++) {
- sram[i] = task_org[i];
- }
-
- asm volatile ("sync");
-}
diff --git a/cpu/mpc8220/pci.c b/cpu/mpc8220/pci.c
deleted file mode 100644
index 7ef43b7..0000000
--- a/cpu/mpc8220/pci.c
+++ /dev/null
@@ -1,191 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC8220 PCI Bridge
- */
-#include <common.h>
-#include <mpc8220.h>
-#include <pci.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_PCI)
-
-/* System RAM mapped over PCI */
-#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_MEM_SIZE (1024 * 1024 * 1024)
-
-#define cfg_read(val, addr, type, op) *val = op((type)(addr));
-#define cfg_write(val, addr, type, op) op((type *)(addr), (val));
-
-#define PCI_OP(rw, size, type, op, mask) \
-int mpc8220_pci_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, type val) \
-{ \
- u32 addr = 0; \
- u16 cfg_type = 0; \
- addr = ((offset & 0xfc) | cfg_type | (dev) | 0x80000000); \
- out_be32(hose->cfg_addr, addr); \
- __asm__ __volatile__("sync"); \
- cfg_##rw(val, hose->cfg_data + (offset & mask), type, op); \
- out_be32(hose->cfg_addr, addr & 0x7fffffff); \
- __asm__ __volatile__("sync"); \
- return 0; \
-}
-
-PCI_OP(read, byte, u8 *, in_8, 3)
-PCI_OP(read, word, u16 *, in_le16, 2)
-PCI_OP(write, byte, u8, out_8, 3)
-PCI_OP(write, word, u16, out_le16, 2)
-PCI_OP(write, dword, u32, out_le32, 0)
-
-int mpc8220_pci_read_config_dword(struct pci_controller *hose, pci_dev_t dev,
- int offset, u32 *val)
-{
- u32 addr;
- u32 tmpv;
- u32 mask = 2; /* word access */
- /* Read lower 16 bits */
- addr = ((offset & 0xfc) | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- *val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* Read upper 16 bits */
- offset += 2;
- addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);
- out_be32(hose->cfg_addr, addr);
- __asm__ __volatile__("sync");
- tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));
- out_be32(hose->cfg_addr, addr & 0x7fffffff);
- __asm__ __volatile__("sync");
-
- /* combine results into dword value */
- *val = (tmpv << 16) | *val;
-
- return 0;
-}
-
-void
-pci_mpc8220_init(struct pci_controller *hose)
-{
- u32 win0, win1, win2;
- volatile mpc8220_xcpci_t *xcpci =
- (volatile mpc8220_xcpci_t *) MMAP_XCPCI;
-
- volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG;
-
- win0 = (u32) CONFIG_PCI_MEM_PHYS;
- win1 = (u32) CONFIG_PCI_IO_PHYS;
- win2 = (u32) CONFIG_PCI_CFG_PHYS;
-
- /* Assert PCI reset */
- out_be32 (&xcpci->glb_stat_ctl, PCI_GLB_STAT_CTRL_PR);
-
- /* Disable prefetching but read-multiples will still prefetch */
- out_be32 (&xcpci->target_ctrl, 0x00000000);
-
- /* Initiator windows */
- out_be32 (&xcpci->init_win0, (win0 >> 16) | win0 | 0x003f0000);
- out_be32 (&xcpci->init_win1, ((win1 >> 16) | win1 ));
- out_be32 (&xcpci->init_win2, ((win2 >> 16) | win2 ));
-
- out_be32 (&xcpci->init_win_cfg,
- PCI_INIT_WIN_CFG_WIN0_CTRL_EN |
- PCI_INIT_WIN_CFG_WIN1_CTRL_EN | PCI_INIT_WIN_CFG_WIN1_CTRL_IO |
- PCI_INIT_WIN_CFG_WIN2_CTRL_EN | PCI_INIT_WIN_CFG_WIN2_CTRL_IO);
-
- out_be32 (&xcpci->init_ctrl, 0x00000000);
-
- /* Enable bus master and mem access */
- out_be32 (&xcpci->stat_cmd_reg, PCI_STAT_CMD_B | PCI_STAT_CMD_M);
-
- /* Cache line size and master latency */
- out_be32 (&xcpci->bist_htyp_lat_cshl, (0xf8 << PCI_CFG1_LT_SHIFT));
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-
- out_be32 (&xcpci->target_bar0,
- PCI_TARGET_BASE_ADDR_REG0 | PCI_TARGET_BASE_ADDR_EN);
- out_be32 (&xcpci->target_bar1,
- PCI_TARGET_BASE_ADDR_REG1 | PCI_TARGET_BASE_ADDR_EN);
-
- /* Deassert reset bit */
- out_be32 (&xcpci->glb_stat_ctl, 0x00000000);
-
- /* Enable PCI bus master support */
- /* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,
- PCIREQ2, PCIGNT2 */
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) & 0xFC3FCE7F));
- out_be32((volatile u32 *)&portcfg->pcfg3,
- (in_be32((volatile u32 *)&portcfg->pcfg3) | 0x01400180));
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_set_region(hose->regions + 0,
- CONFIG_PCI_MEM_BUS,
- CONFIG_PCI_MEM_PHYS,
- CONFIG_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_PCI_IO_BUS,
- CONFIG_PCI_IO_PHYS,
- CONFIG_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- pci_set_region(hose->regions + 2,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- hose->region_count = 3;
-
- hose->cfg_addr = &(xcpci->cfg_adr);
- hose->cfg_data = (volatile unsigned char *)CONFIG_PCI_CFG_BUS;
-
- pci_set_ops(hose,
- mpc8220_pci_read_config_byte,
- mpc8220_pci_read_config_word,
- mpc8220_pci_read_config_dword,
- mpc8220_pci_write_config_byte,
- mpc8220_pci_write_config_word,
- mpc8220_pci_write_config_dword);
-
- /* Hose scan */
- pci_register_hose(hose);
- hose->last_busno = pci_hose_scan(hose);
-
- out_be32 (&xcpci->base0, PCI_BASE_ADDR_REG0); /* 256MB - MBAR space */
- out_be32 (&xcpci->base1, PCI_BASE_ADDR_REG1); /* 1GB - SDRAM space */
-}
-
-#endif /* CONFIG_PCI */
diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c
deleted file mode 100644
index 62ac845..0000000
--- a/cpu/mpc8220/speed.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8220.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-typedef struct pllmultiplier {
- u8 hid1;
- int multi;
- int vco_div;
-} pllcfg_t;
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- pllcfg_t bus2core[] = {
- {0x02, 2, 8}, /* 1 */
- {0x01, 2, 4},
- {0x0C, 3, 8}, /* 1.5 */
- {0x00, 3, 4},
- {0x18, 3, 2},
- {0x05, 4, 4}, /* 2 */
- {0x04, 4, 2},
- {0x11, 5, 4}, /* 2.5 */
- {0x06, 5, 2},
- {0x10, 6, 4}, /* 3 */
- {0x08, 6, 2},
- {0x0E, 7, 2}, /* 3.5 */
- {0x0A, 8, 2}, /* 4 */
- {0x07, 9, 2}, /* 4.5 */
- {0x0B, 10, 2}, /* 5 */
- {0x09, 11, 2}, /* 5.5 */
- {0x0D, 12, 2}, /* 6 */
- {0x12, 13, 2}, /* 6.5 */
- {0x14, 14, 2}, /* 7 */
- {0x16, 15, 2}, /* 7.5 */
- {0x1C, 16, 2} /* 8 */
- };
- u32 hid1;
- int i, size, pci2bus;
-
-#if !defined(CONFIG_SYS_MPC8220_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_SYS_MPC8220_CLKIN
-#endif
-
- gd->inp_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* Read XLB to PCI(INP) clock multiplier */
- pci2bus = (*((volatile u32 *)PCI_REG_PCIGSCR) &
- PCI_REG_PCIGSCR_PCI2XLB_CLK_MASK)>>PCI_REG_PCIGSCR_PCI2XLB_CLK_BIT;
-
- /* XLB bus clock */
- gd->bus_clk = CONFIG_SYS_MPC8220_CLKIN * pci2bus;
-
- /* PCI clock is same as input clock */
- gd->pci_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* FlexBus is temporary set as the same as input clock */
- /* will do dynamic in the future */
- gd->flb_clk = CONFIG_SYS_MPC8220_CLKIN;
-
- /* CPU Clock - Read HID1 */
- asm volatile ("mfspr %0, 1009":"=r" (hid1):);
-
- size = sizeof (bus2core) / sizeof (pllcfg_t);
-
- hid1 >>= 27;
-
- for (i = 0; i < size; i++)
- if (hid1 == bus2core[i].hid1) {
- gd->cpu_clk = (bus2core[i].multi * gd->bus_clk) >> 1;
- gd->vco_clk = CONFIG_SYS_MPC8220_SYSPLL_VCO_MULTIPLIER * (gd->pci_clk * bus2core[i].vco_div)/2;
- break;
- }
-
- /* hardcoded 81MHz for now */
- gd->pev_clk = 81000000;
-
- return (0);
-}
-
-int prt_mpc8220_clks (void)
-{
- char buf1[32], buf2[32], buf3[32], buf4[32];
-
- printf (" Bus %s MHz, CPU %s MHz, PCI %s MHz, VCO %s MHz\n",
- strmhz(buf1, gd->bus_clk),
- strmhz(buf2, gd->cpu_clk),
- strmhz(buf3, gd->pci_clk),
- strmhz(buf4, gd->vco_clk)
- );
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S
deleted file mode 100644
index e28999d..0000000
--- a/cpu/mpc8220/start.S
+++ /dev/null
@@ -1,750 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000 - 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC8220 CPUs
- */
-#include <config.h>
-#include <mpc8220.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * Version string
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Exception vectors
- */
- .text
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On */
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
- mfmsr r5 /* save msr contents */
-
- /* replace default MBAR base address from 0x80000000
- to 0xf0000000 */
-
-#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT)
- lis r3, CONFIG_SYS_MBAR@h
- ori r3, r3, CONFIG_SYS_MBAR@l
-
- /* MBAR is mirrored into the MBAR SPR */
- mtspr MBAR,r3
- mtspr SPRN_SPRG7W,r3
- lis r4, CONFIG_SYS_DEFAULT_MBAR@h
- stw r3, 0(r4)
-#endif /* CONFIG_SYS_DEFAULT_MBAR */
-
- /* Initialise the MPC8220 processor core */
- /*--------------------------------------------------------------*/
-
- bl init_8220_core
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- /* set up stack in on-chip SRAM */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/*
- * This code initialises the MPC8220 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_8220_core
-init_8220_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- /* Enable Extra BATs */
- mfspr r3, 1011 /* HID2 */
- lis r4, 0x0004
- ori r4, r4, 0x0000
- or r4, r4, r3
- mtspr 1011, r4
- sync
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr DBAT4U, r0
- mtspr DBAT4L, r0
- mtspr DBAT5U, r0
- mtspr DBAT5L, r0
- mtspr DBAT6U, r0
- mtspr DBAT6L, r0
- mtspr DBAT7U, r0
- mtspr DBAT7L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- mtspr IBAT4U, r0
- mtspr IBAT4L, r0
- mtspr IBAT5U, r0
- mtspr IBAT5L, r0
- mtspr IBAT6U, r0
- mtspr IBAT6L, r0
- mtspr IBAT7U, r0
- mtspr IBAT7L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- lis r4, 0
- ori r4, r4, CONFIG_SYS_HID0_INIT /* set ICE & ICFI bit */
- rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 17, 15 /* clear the ICE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DCFI /* set DCE & DCFI bit */
- rlwinm r3, r4, 0, 22, 20 /* clear the DCFI bit */
-
- /* Enable address translation in MSR bit */
- mfmsr r5
- ori r5, r5, 0x
-
-
- /*
- * The setting of the instruction cache enable (ICE) bit must be
- * preceded by an isync instruction to prevent the cache from being
- * enabled or disabled while an instruction access is in progress.
- */
- isync
- mtspr HID0, r4 /* Enable Data Cache & Inval cache*/
- mtspr HID0, r3 /* using 2 consec instructions */
- isync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- rlwinm r3, r3, 0, 18, 16 /* clear the DCE bit */
- mtspr HID0, r3
- isync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
diff --git a/cpu/mpc8220/traps.c b/cpu/mpc8220/traps.c
deleted file mode 100644
index 4565780..0000000
--- a/cpu/mpc8220/traps.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de)
- *
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table (unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void print_backtrace (unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf ("Call backtrace: ");
- while (sp) {
- if ((uint) sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf ("\n");
- printf ("%08lX ", i);
- if (cnt > 32)
- break;
- sp = (unsigned long *) *sp;
- }
- printf ("\n");
-}
-
-void show_regs (struct pt_regs *regs)
-{
- int i;
-
- printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr,
- regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
- regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
-
- printf ("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf ("GPR%02d: ", i);
- }
-
- printf ("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf ("\n");
- }
- }
-}
-
-
-void _exception (int signr, struct pt_regs *regs)
-{
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void MachineCheckException (struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table (regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
-
- printf ("Machine check in kernel mode.\n");
- printf ("Caused by (from msr): ");
- printf ("regs %p ", regs);
- /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
- switch (regs->msr & 0x000F0000) {
- case (0x80000000 >> 12):
- printf ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000 >> 13):
- printf ("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- printf ("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- printf ("Address parity signal\n");
- break;
- default:
- printf ("Unknown values in msr\n");
- }
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("machine check");
-}
-
-void AlignmentException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Alignment Exception");
-}
-
-void ProgramCheckException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Program Check Exception");
-}
-
-void SoftEmuException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs (regs);
- print_backtrace ((unsigned long *) regs->gpr[1]);
- panic ("Software Emulation Exception");
-}
-
-
-void UnknownException (struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler
- && (*debugger_exception_handler) (regs))
- return;
-#endif
- printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception (0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint (struct pt_regs *);
-#endif
-
-void DebugException (struct pt_regs *regs)
-{
-
- printf ("Debugger trap at @ %lx\n", regs->nip);
- show_regs (regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint (regs);
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int addr_probe (uint * addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__ ("1: lwz %0,0(%1)\n"
- " eieio\n"
- " li %0,0\n"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: li %0,-1\n"
- " b 2b\n"
- ".section __ex_table,\"a\"\n"
- " .align 2\n"
- " .long 1b,3b\n"
- ".text":"=r" (retval):"r" (addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8220/u-boot.lds b/cpu/mpc8220/u-boot.lds
deleted file mode 100644
index 4400e60..0000000
--- a/cpu/mpc8220/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc8220/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc8220/uart.c b/cpu/mpc8220/uart.c
deleted file mode 100644
index 0c4b536..0000000
--- a/cpu/mpc8220/uart.c
+++ /dev/null
@@ -1,126 +0,0 @@
-/*
- * (C) Copyright 2004, Freescale, Inc
- * TsiChung Liew, Tsi-Chung.Liew@freescale.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Minimal serial functions needed to use one of the PSC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8220.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PSC_BASE MMAP_PSC1
-
-#if defined(CONFIG_PSC_CONSOLE)
-int serial_init (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- /* write to SICR: SIM2 = uart mode,dcd does not affect rx */
- psc->cr = 0;
- psc->ipcr_acr = 0;
- psc->isr_imr = 0;
-
- /* write to CSR: RX/TX baud rate from timers */
- psc->sr_csr = 0xdd000000;
-
- psc->mr1_2 = PSC_MR1_BITS_CHAR_8 | PSC_MR1_NO_PARITY | PSC_MR2_STOP_BITS_1;
-
- /* Setting up BaudRate */
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
- psc->cr = PSC_CR_RST_ERR_STS_CMD;
- psc->cr = PSC_CR_RST_BRK_INT_CMD;
- psc->cr = PSC_CR_RST_MR_PTR_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
- return (0);
-}
-
-void serial_putc (const char c)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- if (c == '\n')
- serial_putc ('\r');
-
- /* Wait for last character to go. */
- while (!(psc->sr_csr & PSC_SR_TXRDY));
-
- psc->xmitbuf[0] = c;
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- /* Wait for a character to arrive. */
- while (!(psc->sr_csr & PSC_SR_RXRDY));
- return psc->xmitbuf[2];
-}
-
-int serial_tstc (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
-
- return (psc->sr_csr & PSC_SR_RXRDY);
-}
-
-void serial_setbrg (void)
-{
- volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
- u32 counter;
-
- counter = ((gd->bus_clk / gd->baudrate)) >> 5;
- counter++;
-
- /* write to CTUR: divide counter upper byte */
- psc->ctur = ((counter & 0xff00) << 16);
- /* write to CTLR: divide counter lower byte */
- psc->ctlr = ((counter & 0x00ff) << 24);
-
- psc->cr = PSC_CR_RST_RX_CMD;
- psc->cr = PSC_CR_RST_TX_CMD;
-
- psc->cr = PSC_CR_RX_ENABLE | PSC_CR_TX_ENABLE;
-}
-#endif /* CONFIG_PSC_CONSOLE */
diff --git a/cpu/mpc824x/.gitignore b/cpu/mpc824x/.gitignore
deleted file mode 100644
index 2d79931..0000000
--- a/cpu/mpc824x/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-/bedbug_603e.c
diff --git a/cpu/mpc824x/Makefile b/cpu/mpc824x/Makefile
deleted file mode 100644
index a57ad12..0000000
--- a/cpu/mpc824x/Makefile
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)drivers/epic)
-$(shell mkdir -p $(obj)drivers/i2c)
-endif
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-COBJS = traps.o cpu.o cpu_init.o interrupts.o speed.o \
- drivers/epic/epic1.o drivers/i2c/i2c.o pci.o
-COBJS_LN = bedbug_603e.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-$(obj)bedbug_603e.c:
- ln -sf $(src)../mpc8260/bedbug_603e.c $(obj)bedbug_603e.c
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc824x/config.mk b/cpu/mpc824x/config.mk
deleted file mode 100644
index 940474b..0000000
--- a/cpu/mpc824x/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC824X -ffixed-r2 -mstring -mcpu=603e -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc824x/u-boot.lds
diff --git a/cpu/mpc824x/cpu.c b/cpu/mpc824x/cpu.c
deleted file mode 100644
index 08f6a94..0000000
--- a/cpu/mpc824x/cpu.c
+++ /dev/null
@@ -1,280 +0,0 @@
-/*
- * (C) Copyright 2000 - 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mpc824x.h>
-#include <common.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- unsigned int pvr = get_pvr ();
- unsigned int version = pvr >> 16;
- unsigned char revision;
- ulong clock = gd->cpu_clk;
- char buf[32];
-
- puts ("CPU: ");
-
- switch (version) {
- case CPU_TYPE_8240:
- puts ("MPC8240");
- break;
-
- case CPU_TYPE_8245:
- puts ("MPC8245");
- break;
-
- default:
- return -1; /*not valid for this source */
- }
-
- CONFIG_READ_BYTE (REVID, revision);
-
- if (revision) {
- printf (" Revision %d.%d",
- (revision & 0xf0) >> 4,
- (revision & 0x0f));
- } else {
- return -1; /* no valid CPU revision info */
- }
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- puts ("\n");
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-
-int checkicache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-
-int checkdcache (void)
-{
- /*TODO*/
- return 128 * 4 * 32;
-
-};
-
-/*------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- /* Interrupts and MMU off */
- __asm__ ("mtspr 81, 0");
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~0x1030;
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address,
- * CONFIG_SYS_MONITOR_BASE - sizeof (ulong) is usually a valid
- * address. Better pick an address known to be invalid on
- * your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- * This is the sys_logic_clk (memory bus) divided by 4
- */
-unsigned long get_tbclk (void)
-{
- return ((get_bus_freq (0) + 2L) / 4L);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * The MPC824x has an integrated PCI controller known as the MPC107.
- * The following are MPC107 Bridge Controller and PCI Support functions
- *
- */
-
-/*
- * This procedure reads a 32-bit address MPC107 register, and returns
- * a 32 bit value. It swaps the address to little endian before
- * writing it to config address, and swaps the value to big endian
- * before returning to the caller.
- */
-unsigned int mpc824x_mpc107_getreg (unsigned int regNum)
-{
- unsigned int temp;
-
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- temp = *(volatile unsigned int *) CHRP_REG_DATA;
- return PCISWAP (temp); /* swap the data upon return */
-}
-
-/*
- * This procedure writes a 32-bit address MPC107 register. It swaps
- * the address to little endian before writing it to config address.
- */
-
-void mpc824x_mpc107_setreg (unsigned int regNum, unsigned int regVal)
-{
- /* swap the addr. to little endian */
- *(volatile unsigned int *) CHRP_REG_ADDR = PCISWAP (regNum);
- *(volatile unsigned int *) CHRP_REG_DATA = PCISWAP (regVal);
- return;
-}
-
-
-/*
- * Write a byte (8 bits) to a memory location.
- */
-void mpc824x_mpc107_write8 (unsigned int addr, unsigned char data)
-{
- *(unsigned char *) addr = data;
- __asm__ ("sync");
-}
-
-/*
- * Write a word (16 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write16 (unsigned int address, unsigned short data)
-{
- *(volatile unsigned short *) address = BYTE_SWAP_16_BIT (data);
- __asm__ ("sync");
-}
-
-/*
- * Write a long word (32 bits) to a memory location after the value
- * has been byte swapped (big to little endian or vice versa)
- */
-
-void mpc824x_mpc107_write32 (unsigned int address, unsigned int data)
-{
- *(volatile unsigned int *) address = LONGSWAP (data);
- __asm__ ("sync");
-}
-
-/*
- * Read a byte (8 bits) from a memory location.
- */
-unsigned char mpc824x_mpc107_read8 (unsigned int addr)
-{
- return *(volatile unsigned char *) addr;
-}
-
-
-/*
- * Read a word (16 bits) from a memory location, and byte swap the
- * value before returning to the caller.
- */
-unsigned short mpc824x_mpc107_read16 (unsigned int address)
-{
- unsigned short retVal;
-
- retVal = BYTE_SWAP_16_BIT (*(unsigned short *) address);
- return retVal;
-}
-
-
-/*
- * Read a long word (32 bits) from a memory location, and byte
- * swap the value before returning to the caller.
- */
-unsigned int mpc824x_mpc107_read32 (unsigned int address)
-{
- unsigned int retVal;
-
- retVal = LONGSWAP (*(unsigned int *) address);
- return (retVal);
-}
-
-
-/*
- * Read a register in the Embedded Utilities Memory Block address
- * space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register number
- * being passed is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * Output: The 32 bit little endian value of the register.
- */
-
-unsigned int mpc824x_eummbar_read (unsigned int regNum)
-{
- unsigned int temp;
-
- temp = *(volatile unsigned int *) (EUMBBAR_VAL + regNum);
- temp = PCISWAP (temp);
- return temp;
-}
-
-
-/*
- * Write a value to a register in the Embedded Utilities Memory
- * Block address space.
- * Input: regNum - register number + utility base address. Example,
- * the base address of EPIC is 0x40000, the register
- * number is 0x40000+the address of the target register.
- * (See epic.h for register addresses).
- * regVal - value to be written to the register.
- */
-
-void mpc824x_eummbar_write (unsigned int regNum, unsigned int regVal)
-{
- *(volatile unsigned int *) (EUMBBAR_VAL + regNum) = PCISWAP (regVal);
- return;
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c
deleted file mode 100644
index 395f776..0000000
--- a/cpu/mpc824x/cpu_init.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor. Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <mpc824x.h>
-
-#ifndef CONFIG_SYS_BANK0_ROW
-#define CONFIG_SYS_BANK0_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK1_ROW
-#define CONFIG_SYS_BANK1_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK2_ROW
-#define CONFIG_SYS_BANK2_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK3_ROW
-#define CONFIG_SYS_BANK3_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK4_ROW
-#define CONFIG_SYS_BANK4_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK5_ROW
-#define CONFIG_SYS_BANK5_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK6_ROW
-#define CONFIG_SYS_BANK6_ROW 0
-#endif
-#ifndef CONFIG_SYS_BANK7_ROW
-#define CONFIG_SYS_BANK7_ROW 0
-#endif
-#ifndef CONFIG_SYS_DBUS_SIZE2
-#define CONFIG_SYS_DBUS_SIZE2 0
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- */
-void
-cpu_init_f (void)
-{
-/* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
- register unsigned long val;
- CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
-/* CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
-
-#if defined(CONFIG_MUSENKI) || defined(CONFIG_PN62)
-/* Why is this here, you ask? Try, just try setting 0x8000
- * in PCIACR with CONFIG_WRITE_HALFWORD()
- * this one was a stumper, and we are annoyed
- */
-
-#define M_CONFIG_WRITE_HALFWORD( addr, data ) \
- __asm__ __volatile__(" \
- stw %2,0(%0)\n \
- sync\n \
- sth %3,2(%1)\n \
- sync\n \
- " \
- : /* no output */ \
- : "r" (CONFIG_ADDR), "r" (CONFIG_DATA), \
- "r" (PCISWAP(addr & ~3)), "r" (PCISWAP(data << 16)) \
- );
-
- M_CONFIG_WRITE_HALFWORD(PCIACR, 0x8000);
-#endif
-
- CONFIG_WRITE_BYTE(PCLSR, 0x8); /* set PCI cache line size */
- CONFIG_WRITE_BYTE (PLTR, 0x40); /* set PCI latency timer */
- /*
- * Note that although this bit is cleared after a hard reset, it
- * must be explicitly set and then cleared by software during
- * initialization in order to guarantee correct operation of the
- * DLL and the SDRAM_CLK[0:3] signals (if they are used).
- */
- CONFIG_READ_BYTE (AMBOR, val);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
- CONFIG_WRITE_BYTE(AMBOR, val | 0x20);
- CONFIG_WRITE_BYTE(AMBOR, val & 0xDF);
-#ifdef CONFIG_MPC8245
- /* silicon bug 28 MPC8245 */
- CONFIG_READ_BYTE(AMBOR,val);
- CONFIG_WRITE_BYTE(AMBOR,val|0x1);
-
-#if 0
- /*
- * The following bug only affects older (XPC8245) processors.
- * DMA transfers initiated by external devices get corrupted due
- * to a hardware scheduling problem.
- *
- * The effect is:
- * when transferring X words, the first 32 words are transferred
- * OK, the next 3 x 32 words are 'old' data (from previous DMA)
- * while the rest of the X words is xferred fine.
- *
- * Disabling 3 of the 4 32 word hardware buffers solves the problem
- * with no significant performance loss.
- */
-
- CONFIG_READ_BYTE(PCMBCR,val);
- /* in order not to corrupt data which is being read over the PCI bus
- * with the PPC as slave, we need to reduce the number of PCMRBs to 1,
- * 4.11 in the processor user manual
- * */
-
-#if 1
- CONFIG_WRITE_BYTE(PCMBCR,(val|0xC0)); /* 1 PCMRB */
-#else
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
- CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
- /* default, 4 PCMRBs are used */
-#endif
-#endif
-#endif
-
- CONFIG_READ_WORD(PICR1, val);
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_ADDRESS_MAP | PICR1_RCS0)) |
- PIRC1_MSK | PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_EN_PCS |
- PICR1_CF_APARK );
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD( PICR1,
- (val & (PICR1_RCS0)) |
- PICR1_PROC_TYPE_603E |
- PICR1_FLASH_WR_EN | PICR1_MCP_EN |
- PICR1_CF_DPARK | PICR1_NO_BUSW_CK |
- PICR1_DEC| PICR1_CF_APARK | 0x10); /* 8245 UM says bit 4 must be set */
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_READ_WORD(PICR2, val);
- val= val & ~ (PICR2_CF_SNOOP_WS_MASK | PICR2_CF_APHASE_WS_MASK); /*mask off waitstate bits*/
-#ifndef CONFIG_PN62
- val |= PICR2_CF_SNOOP_WS_1WS | PICR2_CF_APHASE_WS_1WS; /*1 wait state*/
-#endif
- CONFIG_WRITE_WORD(PICR2, val);
-
- CONFIG_WRITE_WORD(EUMBBAR, CONFIG_SYS_EUMB_ADDR);
-#ifndef CONFIG_SYS_RAMBOOT
- CONFIG_WRITE_WORD(MCCR1, (CONFIG_SYS_ROMNAL << MCCR1_ROMNAL_SHIFT) |
- (CONFIG_SYS_BANK0_ROW) |
- (CONFIG_SYS_BANK1_ROW << MCCR1_BANK1ROW_SHIFT) |
- (CONFIG_SYS_BANK2_ROW << MCCR1_BANK2ROW_SHIFT) |
- (CONFIG_SYS_BANK3_ROW << MCCR1_BANK3ROW_SHIFT) |
- (CONFIG_SYS_BANK4_ROW << MCCR1_BANK4ROW_SHIFT) |
- (CONFIG_SYS_BANK5_ROW << MCCR1_BANK5ROW_SHIFT) |
- (CONFIG_SYS_BANK6_ROW << MCCR1_BANK6ROW_SHIFT) |
- (CONFIG_SYS_BANK7_ROW << MCCR1_BANK7ROW_SHIFT) |
- (CONFIG_SYS_ROMFAL << MCCR1_ROMFAL_SHIFT));
-#endif
-
-#if defined(CONFIG_SYS_ASRISE) && defined(CONFIG_SYS_ASFALL)
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT |
- CONFIG_SYS_ASRISE << MCCR2_ASRISE_SHIFT |
- CONFIG_SYS_ASFALL << MCCR2_ASFALL_SHIFT);
-#else
- CONFIG_WRITE_WORD(MCCR2, CONFIG_SYS_REFINT << MCCR2_REFINT_SHIFT);
-#endif
-
-#if defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT) |
- (CONFIG_SYS_RDLAT << MCCR3_RDLAT_SHIFT));
-#elif defined(CONFIG_MPC8245)
- CONFIG_WRITE_WORD(MCCR3,
- (((CONFIG_SYS_BSTOPRE & 0x003c) >> 2) << MCCR3_BSTOPRE2TO5_SHIFT) |
- (CONFIG_SYS_REFREC << MCCR3_REFREC_SHIFT));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
-/* this is gross. We think these should all be the same, and various boards
- * should define CONFIG_SYS_ACTORW to 0 if they don't want to set it, or even, if
- * its not set, we define it to zero in this file
- */
-#if defined(CONFIG_CU824) || defined(CONFIG_PN62)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- CONFIG_SYS_SDMODE_BURSTLEN) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) << MCCR4_BSTOPRE6TO9_SHIFT));
-#elif defined(CONFIG_MPC8240)
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- MCCR4_BIT21 |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (CONFIG_SYS_SDMODE_BURSTLEN)) <<MCCR4_SDMODE_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#elif defined(CONFIG_MPC8245)
- CONFIG_READ_WORD(MCCR1, val);
- val &= MCCR1_DBUS_SIZE0; /* test for 64-bit mem bus */
-
- CONFIG_WRITE_WORD(MCCR4,
- (CONFIG_SYS_PRETOACT << MCCR4_PRETOACT_SHIFT) |
- (CONFIG_SYS_ACTTOPRE << MCCR4_ACTTOPRE_SHIFT) |
- (CONFIG_SYS_EXTROM ? MCCR4_EXTROM : 0) |
- (CONFIG_SYS_REGDIMM ? MCCR4_REGDIMM : 0) |
- (CONFIG_SYS_REGISTERD_TYPE_BUFFER ? MCCR4_REGISTERED: 0) |
- ((CONFIG_SYS_BSTOPRE & 0x0003) <<MCCR4_BSTOPRE0TO1_SHIFT ) |
- (CONFIG_SYS_DBUS_SIZE2 << MCCR4_DBUS_SIZE2_SHIFT) |
- (((CONFIG_SYS_SDMODE_CAS_LAT <<4) | (CONFIG_SYS_SDMODE_WRAP <<3) |
- (val ? 2 : 3)) << MCCR4_SDMODE_SHIFT) |
- (CONFIG_SYS_ACTORW << MCCR4_ACTTORW_SHIFT) |
- (((CONFIG_SYS_BSTOPRE & 0x03c0) >> 6) <<MCCR4_BSTOPRE6TO9_SHIFT ));
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-
- CONFIG_WRITE_WORD(MSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR1,
- ( (CONFIG_SYS_BANK0_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMSAR2,
- ( (CONFIG_SYS_BANK4_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_START & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR1,
- ( (CONFIG_SYS_BANK0_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK1_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK2_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK3_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(MEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT) << 24));
- CONFIG_WRITE_WORD(EMEAR2,
- ( (CONFIG_SYS_BANK4_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) |
- (((CONFIG_SYS_BANK5_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 8) |
- (((CONFIG_SYS_BANK6_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 16) |
- (((CONFIG_SYS_BANK7_END & MICR_EADDR_MASK) >> MICR_EADDR_SHIFT) << 24));
-
- CONFIG_WRITE_BYTE(ODCR, CONFIG_SYS_ODCR);
-#ifdef CONFIG_SYS_DLL_MAX_DELAY
- CONFIG_WRITE_BYTE(MIOCR1, CONFIG_SYS_DLL_MAX_DELAY); /* needed to make DLL lock */
-#endif
-#if defined(CONFIG_SYS_DLL_EXTEND) && defined(CONFIG_SYS_PCI_HOLD_DEL)
- CONFIG_WRITE_BYTE(PMCR2, CONFIG_SYS_DLL_EXTEND | CONFIG_SYS_PCI_HOLD_DEL);
-#endif
-#if defined(MIOCR2) && defined(CONFIG_SYS_SDRAM_DSCD)
- CONFIG_WRITE_BYTE(MIOCR2, CONFIG_SYS_SDRAM_DSCD); /* change memory input */
-#endif /* setup & hold time */
-
- CONFIG_WRITE_BYTE(MBER,
- CONFIG_SYS_BANK0_ENABLE |
- (CONFIG_SYS_BANK1_ENABLE << 1) |
- (CONFIG_SYS_BANK2_ENABLE << 2) |
- (CONFIG_SYS_BANK3_ENABLE << 3) |
- (CONFIG_SYS_BANK4_ENABLE << 4) |
- (CONFIG_SYS_BANK5_ENABLE << 5) |
- (CONFIG_SYS_BANK6_ENABLE << 6) |
- (CONFIG_SYS_BANK7_ENABLE << 7));
-
-#ifdef CONFIG_SYS_PGMAX
- CONFIG_WRITE_BYTE(MPMR, CONFIG_SYS_PGMAX);
-#endif
-
- /* ! Wait 200us before initialize other registers */
- /*FIXME: write a decent udelay wait */
- __asm__ __volatile__(
- " mtctr %0 \n \
- 0: bdnz 0b\n"
- :
- : "r" (0x10000));
-
- CONFIG_READ_WORD(MCCR1, val);
- CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
- __asm__ __volatile__("eieio");
-
-#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
-}
-
-
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
-struct MPC107_s {
- unsigned int iobase;
- char desc[120];
-} MPC107Regs[] = {
- { BMC_BASE + 0x00, "MPC107 Vendor/Device ID" },
- { BMC_BASE + 0x04, "MPC107 PCI Command/Status Register" },
- { BMC_BASE + 0x08, "MPC107 Revision" },
- { BMC_BASE + 0x0C, "MPC107 Cache Line Size" },
- { BMC_BASE + 0x10, "MPC107 LMBAR" },
- { BMC_BASE + 0x14, "MPC824x PCSR" },
- { BMC_BASE + 0xA8, "MPC824x PICR1" },
- { BMC_BASE + 0xAC, "MPC824x PICR2" },
- { BMC_BASE + 0x46, "MPC824x PACR" },
- { BMC_BASE + 0x310, "MPC824x ITWR" },
- { BMC_BASE + 0x300, "MPC824x OMBAR" },
- { BMC_BASE + 0x308, "MPC824x OTWR" },
- { BMC_BASE + 0x14, "MPC107 Peripheral Control and Status Register" },
- { BMC_BASE + 0x78, "MPC107 EUMBAR" },
- { BMC_BASE + 0xC0, "MPC107 Processor Bus Error Status" },
- { BMC_BASE + 0xC4, "MPC107 PCI Bus Error Status" },
- { BMC_BASE + 0xC8, "MPC107 Processor/PCI Error Address" },
- { BMC_BASE + 0xE0, "MPC107 AMBOR Register" },
- { BMC_BASE + 0xF0, "MPC107 MCCR1 Register" },
- { BMC_BASE + 0xF4, "MPC107 MCCR2 Register" },
- { BMC_BASE + 0xF8, "MPC107 MCCR3 Register" },
- { BMC_BASE + 0xFC, "MPC107 MCCR4 Register" },
-};
-#define N_MPC107_Regs (sizeof(MPC107Regs)/sizeof(MPC107Regs[0]))
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#ifdef CONFIG_MOUSSE
-#ifdef INCLUDE_MPC107_REPORT
- unsigned int tmp = 0, i;
-#endif
- /*
- * Initialize the EUMBBAR (Embedded Util Mem Block Base Addr Reg).
- * This is necessary before the EPIC, DMA ctlr, I2C ctlr, etc. can
- * be accessed.
- */
-
-#ifdef CONFIG_MPC8240 /* only on MPC8240 */
- mpc824x_mpc107_setreg (EUMBBAR, EUMBBAR_VAL);
- /* MOT/SPS: Issue #10002, PCI (FD Alias enable) */
- mpc824x_mpc107_setreg (AMBOR, 0x000000C0);
-#endif
-
-
-#ifdef INCLUDE_MPC107_REPORT
- /* Check MPC824x PCI Device and Vendor ID */
- while ((tmp = mpc824x_mpc107_getreg (BMC_BASE)) != 0x31057) {
- printf (" MPC107: offset=0x%x, val = 0x%x\n",
- BMC_BASE,
- tmp);
- }
-
- for (i = 0; i < N_MPC107_Regs; i++) {
- printf (" 0x%x/%s = 0x%x\n",
- MPC107Regs[i].iobase,
- MPC107Regs[i].desc,
- mpc824x_mpc107_getreg (MPC107Regs[i].iobase));
- }
-
- printf ("IBAT0L = 0x%08X\n", mfspr (IBAT0L));
- printf ("IBAT0U = 0x%08X\n", mfspr (IBAT0U));
- printf ("IBAT1L = 0x%08X\n", mfspr (IBAT1L));
- printf ("IBAT1U = 0x%08X\n", mfspr (IBAT1U));
- printf ("IBAT2L = 0x%08X\n", mfspr (IBAT2L));
- printf ("IBAT2U = 0x%08X\n", mfspr (IBAT2U));
- printf ("IBAT3L = 0x%08X\n", mfspr (IBAT3L));
- printf ("IBAT3U = 0x%08X\n", mfspr (IBAT3U));
- printf ("DBAT0L = 0x%08X\n", mfspr (DBAT0L));
- printf ("DBAT0U = 0x%08X\n", mfspr (DBAT0U));
- printf ("DBAT1L = 0x%08X\n", mfspr (DBAT1L));
- printf ("DBAT1U = 0x%08X\n", mfspr (DBAT1U));
- printf ("DBAT2L = 0x%08X\n", mfspr (DBAT2L));
- printf ("DBAT2U = 0x%08X\n", mfspr (DBAT2U));
- printf ("DBAT3L = 0x%08X\n", mfspr (DBAT3L));
- printf ("DBAT3U = 0x%08X\n", mfspr (DBAT3U));
-#endif /* INCLUDE_MPC107_REPORT */
-#endif /* CONFIG_MOUSSE */
- return (0);
-}
diff --git a/cpu/mpc824x/drivers/epic.h b/cpu/mpc824x/drivers/epic.h
deleted file mode 100644
index 2803f63..0000000
--- a/cpu/mpc824x/drivers/epic.h
+++ /dev/null
@@ -1 +0,0 @@
-#include "epic/epic.h"
diff --git a/cpu/mpc824x/drivers/epic/README b/cpu/mpc824x/drivers/epic/README
deleted file mode 100644
index 5798996..0000000
--- a/cpu/mpc824x/drivers/epic/README
+++ /dev/null
@@ -1,102 +0,0 @@
-CONTENT:
-
- epic.h
- epic1.c
- epic2.s
-
-WHAT ARE THESE FILES:
-
-These files contain MPC8240 (Kahlua) EPIC
-driver routines. The driver routines are not
-written for any specific operating system.
-They serves the purpose of code sample, and
-jump-start for using the MPC8240 EPIC unit.
-
-For the reason of correctness of C language
-syntax, these files are compiled by Metaware
-C compiler and assembler.
-
-ENDIAN NOTATION:
-
-The algorithm is designed for big-endian mode,
-software is responsible for byte swapping.
-
-USAGE:
-
-1. The host system that is running on MPC8240
- shall link the files listed here. The memory
- location of driver routines shall take into
- account of that driver routines need to run
- in supervisor mode and they process external
- interrupts.
-
- The routine epic_exception shall be called by
- exception vector at location 0x500, i.e.,
- 603e core external exception vector.
-
-2. The host system is responsible for configuring
- the MPC8240 including Embedded Utilities Memory
- Block. All EPIC driver functions require the
- content of Embedded Utilities Memory Block
- Base Address Register, EUMBBAR, as the first
- parameter.
-
-3. Before EPIC unit of MPC8240 can be used,
- initialize EPIC unit by calling epicInit
- with the corresponding parameters.
-
- The initialization shall disable the 603e
- core External Exception by calling CoreExtIntDisable( ).
- Next, call epicInit( ). Last, enable the 603e core
- External Exception by calling CoreExtIntEnable( ).
-
-4. After EPIC unit has been successfully initialized,
- epicIntSourceSet( ) shall be used to register each
- external interrupt source. Anytime, an external
- interrupt source can be disabled or enabled by
- calling corresponding function, epicIntDisable( ),
- or epicIntEnable( ).
-
- Global Timers' resource, base count and frequency,
- can be changed by calling epicTmFrequencySet( )
- and epicTmBaseSet( ).
-
- To stop counting a specific global timer, use
- the function, epicTmInhibit while epicTmEnable
- can be used to start counting a timer.
-
-5. To mask a set of external interrupts that are
- are certain level below, epicIntPrioritySet( )
- can be used. For example, if the processor's
- current task priority register is set to 0x7,
- only interrupts of priority 0x8 or higher will
- be passed to the processor.
-
- Be careful when using this function. It may
- corrupt the current interrupt pending, selector,
- and request registers, resulting an invalid vetor.
-
- After enabling an interrupt, disable it may also
- cause an invalid vector. User may consider using
- the spurious vector interrupt service routine to
- handle this case.
-
-6. The EPIC driver routines contains a set
- of utilities, Set and Get, for host system
- to query and modify the desired EPIC source
- registers.
-
-7. Each external interrupt source shall register
- its interrupt service routine. The routine
- shall contain all interrupt source specific
- processes and keep as short as possible.
-
- Special customized end of interrupt routine
- is optional. If it is needed, it shall contain
- the external interrupt source specific end of
- interrupt process.
-
- External interrupt exception vector at 0x500
- shall always call the epicEOI just before
- rfi instruction. Refer to the routine,
- epic_exception, for a code sample.
diff --git a/cpu/mpc824x/drivers/epic/epic.h b/cpu/mpc824x/drivers/epic/epic.h
deleted file mode 100644
index 58f81c5..0000000
--- a/cpu/mpc824x/drivers/epic/epic.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*********************************************************************
- * mpc8240epic.h - EPIC module of the MPC8240 micro-controller
- *
- * Copyrigh 1999 Motorola Inc.
- *
- * Modification History:
- * =====================
- * 01a,04Feb99,My Created.
- * 15Nov200, robt -modified to use in U-Boot
- *
-*/
-
-#ifndef __INCEPICh
-#define __INCEPICh
-
-#define ULONG unsigned long
-#define MAXVEC 20
-#define MAXIRQ 5 /* IRQs */
-#define EPIC_DIRECT_IRQ 0 /* Direct interrupt type */
-
-/* EPIC register addresses */
-
-#define EPIC_EUMBBAR 0x40000 /* EUMBBAR of EPIC */
-#define EPIC_FEATURES_REG (EPIC_EUMBBAR + 0x01000)/* Feature reporting */
-#define EPIC_GLOBAL_REG (EPIC_EUMBBAR + 0x01020)/* Global config. */
-#define EPIC_INT_CONF_REG (EPIC_EUMBBAR + 0x01030)/* Interrupt config. */
-#define EPIC_VENDOR_ID_REG (EPIC_EUMBBAR + 0x01080)/* Vendor id */
-#define EPIC_PROC_INIT_REG (EPIC_EUMBBAR + 0x01090)/* Processor init. */
-#define EPIC_SPUR_VEC_REG (EPIC_EUMBBAR + 0x010e0)/* Spurious vector */
-#define EPIC_TM_FREQ_REG (EPIC_EUMBBAR + 0x010f0)/* Timer Frequency */
-
-#define EPIC_TM0_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01100)/* Gbl TM0 Cur. Count*/
-#define EPIC_TM0_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01110)/* Gbl TM0 Base Count*/
-#define EPIC_TM0_VEC_REG (EPIC_EUMBBAR + 0x01120)/* Gbl TM0 Vector Pri*/
-#define EPIC_TM0_DES_REG (EPIC_EUMBBAR + 0x01130)/* Gbl TM0 Dest. */
-
-#define EPIC_TM1_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01140)/* Gbl TM1 Cur. Count*/
-#define EPIC_TM1_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01150)/* Gbl TM1 Base Count*/
-#define EPIC_TM1_VEC_REG (EPIC_EUMBBAR + 0x01160)/* Gbl TM1 Vector Pri*/
-#define EPIC_TM1_DES_REG (EPIC_EUMBBAR + 0x01170)/* Gbl TM1 Dest. */
-
-#define EPIC_TM2_CUR_COUNT_REG (EPIC_EUMBBAR + 0x01180)/* Gbl TM2 Cur. Count*/
-#define EPIC_TM2_BASE_COUNT_REG (EPIC_EUMBBAR + 0x01190)/* Gbl TM2 Base Count*/
-#define EPIC_TM2_VEC_REG (EPIC_EUMBBAR + 0x011a0)/* Gbl TM2 Vector Pri*/
-#define EPIC_TM2_DES_REG (EPIC_EUMBBAR + 0x011b0)/* Gbl TM2 Dest */
-
-#define EPIC_TM3_CUR_COUNT_REG (EPIC_EUMBBAR + 0x011c0)/* Gbl TM3 Cur. Count*/
-#define EPIC_TM3_BASE_COUNT_REG (EPIC_EUMBBAR + 0x011d0)/* Gbl TM3 Base Count*/
-#define EPIC_TM3_VEC_REG (EPIC_EUMBBAR + 0x011e0)/* Gbl TM3 Vector Pri*/
-#define EPIC_TM3_DES_REG (EPIC_EUMBBAR + 0x011f0)/* Gbl TM3 Dest. */
-
-#define EPIC_EX_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Ext. Int. Sr0 Des */
-#define EPIC_EX_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Ext. Int. Sr0 Vect*/
-#define EPIC_EX_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Ext. Int. Sr1 Des */
-#define EPIC_EX_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Ext. Int. Sr1 Vect*/
-#define EPIC_EX_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Ext. Int. Sr2 Des */
-#define EPIC_EX_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Ext. Int. Sr2 Vect*/
-#define EPIC_EX_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Ext. Int. Sr3 Des */
-#define EPIC_EX_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Ext. Int. Sr3 Vect*/
-#define EPIC_EX_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Ext. Int. Sr4 Des */
-#define EPIC_EX_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Ext. Int. Sr4 Vect*/
-
-#define EPIC_SR_INT0_VEC_REG (EPIC_EUMBBAR + 0x10200)/* Sr. Int. Sr0 Des */
-#define EPIC_SR_INT0_DES_REG (EPIC_EUMBBAR + 0x10210)/* Sr. Int. Sr0 Vect */
-#define EPIC_SR_INT1_VEC_REG (EPIC_EUMBBAR + 0x10220)/* Sr. Int. Sr1 Des */
-#define EPIC_SR_INT1_DES_REG (EPIC_EUMBBAR + 0x10230)/* Sr. Int. Sr1 Vect.*/
-#define EPIC_SR_INT2_VEC_REG (EPIC_EUMBBAR + 0x10240)/* Sr. Int. Sr2 Des */
-#define EPIC_SR_INT2_DES_REG (EPIC_EUMBBAR + 0x10250)/* Sr. Int. Sr2 Vect.*/
-#define EPIC_SR_INT3_VEC_REG (EPIC_EUMBBAR + 0x10260)/* Sr. Int. Sr3 Des */
-#define EPIC_SR_INT3_DES_REG (EPIC_EUMBBAR + 0x10270)/* Sr. Int. Sr3 Vect.*/
-#define EPIC_SR_INT4_VEC_REG (EPIC_EUMBBAR + 0x10280)/* Sr. Int. Sr4 Des */
-#define EPIC_SR_INT4_DES_REG (EPIC_EUMBBAR + 0x10290)/* Sr. Int. Sr4 Vect.*/
-
-#define EPIC_SR_INT5_VEC_REG (EPIC_EUMBBAR + 0x102a0)/* Sr. Int. Sr5 Des */
-#define EPIC_SR_INT5_DES_REG (EPIC_EUMBBAR + 0x102b0)/* Sr. Int. Sr5 Vect.*/
-#define EPIC_SR_INT6_VEC_REG (EPIC_EUMBBAR + 0x102c0)/* Sr. Int. Sr6 Des */
-#define EPIC_SR_INT6_DES_REG (EPIC_EUMBBAR + 0x102d0)/* Sr. Int. Sr6 Vect.*/
-#define EPIC_SR_INT7_VEC_REG (EPIC_EUMBBAR + 0x102e0)/* Sr. Int. Sr7 Des */
-#define EPIC_SR_INT7_DES_REG (EPIC_EUMBBAR + 0x102f0)/* Sr. Int. Sr7 Vect.*/
-#define EPIC_SR_INT8_VEC_REG (EPIC_EUMBBAR + 0x10300)/* Sr. Int. Sr8 Des */
-#define EPIC_SR_INT8_DES_REG (EPIC_EUMBBAR + 0x10310)/* Sr. Int. Sr8 Vect.*/
-#define EPIC_SR_INT9_VEC_REG (EPIC_EUMBBAR + 0x10320)/* Sr. Int. Sr9 Des */
-#define EPIC_SR_INT9_DES_REG (EPIC_EUMBBAR + 0x10330)/* Sr. Int. Sr9 Vect.*/
-
-#define EPIC_SR_INT10_VEC_REG (EPIC_EUMBBAR + 0x10340)/* Sr. Int. Sr10 Des */
-#define EPIC_SR_INT10_DES_REG (EPIC_EUMBBAR + 0x10350)/* Sr. Int. Sr10 Vect*/
-#define EPIC_SR_INT11_VEC_REG (EPIC_EUMBBAR + 0x10360)/* Sr. Int. Sr11 Des */
-#define EPIC_SR_INT11_DES_REG (EPIC_EUMBBAR + 0x10370)/* Sr. Int. Sr11 Vect*/
-#define EPIC_SR_INT12_VEC_REG (EPIC_EUMBBAR + 0x10380)/* Sr. Int. Sr12 Des */
-#define EPIC_SR_INT12_DES_REG (EPIC_EUMBBAR + 0x10390)/* Sr. Int. Sr12 Vect*/
-#define EPIC_SR_INT13_VEC_REG (EPIC_EUMBBAR + 0x103a0)/* Sr. Int. Sr13 Des */
-#define EPIC_SR_INT13_DES_REG (EPIC_EUMBBAR + 0x103b0)/* Sr. Int. Sr13 Vect*/
-#define EPIC_SR_INT14_VEC_REG (EPIC_EUMBBAR + 0x103c0)/* Sr. Int. Sr14 Des */
-#define EPIC_SR_INT14_DES_REG (EPIC_EUMBBAR + 0x103d0)/* Sr. Int. Sr14 Vect*/
-#define EPIC_SR_INT15_VEC_REG (EPIC_EUMBBAR + 0x103e0)/* Sr. Int. Sr15 Des */
-#define EPIC_SR_INT15_DES_REG (EPIC_EUMBBAR + 0x103f0)/* Sr. Int. Sr15 Vect*/
-
-#define EPIC_I2C_INT_VEC_REG (EPIC_EUMBBAR + 0x11020)/* I2C Int. Vect Pri.*/
-#define EPIC_I2C_INT_DES_REG (EPIC_EUMBBAR + 0x11030)/* I2C Int. Dest */
-#define EPIC_DMA0_INT_VEC_REG (EPIC_EUMBBAR + 0x11040)/* DMA0 Int. Vect Pri*/
-#define EPIC_DMA0_INT_DES_REG (EPIC_EUMBBAR + 0x11050)/* DMA0 Int. Dest */
-#define EPIC_DMA1_INT_VEC_REG (EPIC_EUMBBAR + 0x11060)/* DMA1 Int. Vect Pri*/
-#define EPIC_DMA1_INT_DES_REG (EPIC_EUMBBAR + 0x11070)/* DMA1 Int. Dest */
-#define EPIC_MSG_INT_VEC_REG (EPIC_EUMBBAR + 0x110c0)/* Msg Int. Vect Pri*/
-#define EPIC_MSG_INT_DES_REG (EPIC_EUMBBAR + 0x110d0)/* Msg Int. Dest */
-
-#define EPIC_PROC_CTASK_PRI_REG (EPIC_EUMBBAR + 0x20080)/* Proc. current task*/
-#define EPIC_PROC_INT_ACK_REG (EPIC_EUMBBAR + 0x200a0)/* Int. acknowledge */
-#define EPIC_PROC_EOI_REG (EPIC_EUMBBAR + 0x200b0)/* End of interrupt */
-
-#define EPIC_VEC_PRI_MASK 0x80000000 /* Mask Interrupt bit in IVPR */
-#define EPIC_VEC_PRI_DFLT_PRI 8 /* Interrupt Priority in IVPR */
-
-/* Error code */
-
-#define OK 0
-#define ERROR -1
-
-/* function prototypes */
-
-void epicVendorId( unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- );
-void epicFeatures( unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *VerId );
-extern void epicInit( unsigned int IRQType, unsigned int clkRatio);
-ULONG sysEUMBBARRead ( ULONG regNum );
-void sysEUMBBARWrite ( ULONG regNum, ULONG regVal);
-extern void epicTmFrequencySet( unsigned int frq );
-extern unsigned int epicTmFrequencyGet(void);
-extern unsigned int epicTmBaseSet( ULONG srcAddr,
- unsigned int cnt,
- unsigned int inhibit );
-extern unsigned int epicTmBaseGet ( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val );
-extern unsigned int epicTmInhibit( unsigned int timer );
-extern unsigned int epicTmEnable( ULONG srcAdr );
-extern void CoreExtIntEnable(void); /* Enable 603e external interrupts */
-extern void CoreExtIntDisable(void); /* Disable 603e external interrupts */
-extern unsigned char epicIntTaskGet(void);
-extern void epicIntTaskSet( unsigned char val );
-extern unsigned int epicIntAck(void);
-extern void epicSprSet( unsigned int eumbbar, unsigned char );
-extern void epicConfigGet( unsigned int *clkRatio,
- unsigned int *serEnable );
-extern void SrcVecTableInit(void);
-extern unsigned int epicModeGet(void);
-extern void epicIntEnable(int Vect);
-extern void epicIntDisable(int Vect);
-extern int epicIntSourceConfig(int Vect, int Polarity, int Sense, int Prio);
-extern unsigned int epicIntAck(void);
-extern void epicEOI(void);
-extern int epicCurTaskPrioSet(int Vect);
-
-struct SrcVecTable
- {
- ULONG srcAddr;
- char srcName[40];
- };
-
-#endif /* EPIC_H */
diff --git a/cpu/mpc824x/drivers/epic/epic1.c b/cpu/mpc824x/drivers/epic/epic1.c
deleted file mode 100644
index ecbb42d..0000000
--- a/cpu/mpc824x/drivers/epic/epic1.c
+++ /dev/null
@@ -1,517 +0,0 @@
-/**************************************************
- *
- * copyright @ motorola, 1999
- *
- *************************************************/
-#include <mpc824x.h>
-#include <common.h>
-#include "epic.h"
-
-
-#define PRINT(format, args...) printf(format , ## args)
-
-typedef void (*VOIDFUNCPTR) (void); /* ptr to function returning void */
-struct SrcVecTable SrcVecTable[MAXVEC] = /* Addr/Vector cross-reference tbl */
- {
- { EPIC_EX_INT0_VEC_REG, "External Direct/Serial Source 0"},
- { EPIC_EX_INT1_VEC_REG, "External Direct/Serial Source 1"},
- { EPIC_EX_INT2_VEC_REG, "External Direct/Serial Source 2"},
- { EPIC_EX_INT3_VEC_REG, "External Direct/Serial Source 3"},
- { EPIC_EX_INT4_VEC_REG, "External Direct/Serial Source 4"},
-
- { EPIC_SR_INT5_VEC_REG, "External Serial Source 5"},
- { EPIC_SR_INT6_VEC_REG, "External Serial Source 6"},
- { EPIC_SR_INT7_VEC_REG, "External Serial Source 7"},
- { EPIC_SR_INT8_VEC_REG, "External Serial Source 8"},
- { EPIC_SR_INT9_VEC_REG, "External Serial Source 9"},
- { EPIC_SR_INT10_VEC_REG, "External Serial Source 10"},
- { EPIC_SR_INT11_VEC_REG, "External Serial Source 11"},
- { EPIC_SR_INT12_VEC_REG, "External Serial Source 12"},
- { EPIC_SR_INT13_VEC_REG, "External Serial Source 13"},
- { EPIC_SR_INT14_VEC_REG, "External Serial Source 14"},
- { EPIC_SR_INT15_VEC_REG, "External Serial Source 15"},
-
- { EPIC_I2C_INT_VEC_REG, "Internal I2C Source"},
- { EPIC_DMA0_INT_VEC_REG, "Internal DMA0 Source"},
- { EPIC_DMA1_INT_VEC_REG, "Internal DMA1 Source"},
- { EPIC_MSG_INT_VEC_REG, "Internal Message Source"},
- };
-
-VOIDFUNCPTR intVecTbl[MAXVEC]; /* Interrupt vector table */
-
-
-/****************************************************************************
-* epicInit - Initialize the EPIC registers
-*
-* This routine resets the Global Configuration Register, thus it:
-* - Disables all interrupts
-* - Sets epic registers to reset values
-* - Sets the value of the Processor Current Task Priority to the
-* highest priority (0xF).
-* epicInit then sets the EPIC operation mode to Mixed Mode (vs. Pass
-* Through or 8259 compatible mode).
-*
-* If IRQType (input) is Direct IRQs:
-* - IRQType is written to the SIE bit of the EPIC Interrupt
-* Configuration register (ICR).
-* - clkRatio is ignored.
-* If IRQType is Serial IRQs:
-* - both IRQType and clkRatio will be written to the ICR register
-*/
-
-void epicInit
- (
- unsigned int IRQType, /* Direct or Serial */
- unsigned int clkRatio /* Clk Ratio for Serial IRQs */
- )
- {
- ULONG tmp;
-
- tmp = sysEUMBBARRead(EPIC_GLOBAL_REG);
- tmp |= 0xa0000000; /* Set the Global Conf. register */
- sysEUMBBARWrite(EPIC_GLOBAL_REG, tmp);
- /*
- * Wait for EPIC to reset - CLH
- */
- while( (sysEUMBBARRead(EPIC_GLOBAL_REG) & 0x80000000) == 1);
- sysEUMBBARWrite(EPIC_GLOBAL_REG, 0x20000000);
- tmp = sysEUMBBARRead(EPIC_INT_CONF_REG); /* Read interrupt conf. reg */
-
- if (IRQType == EPIC_DIRECT_IRQ) /* direct mode */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp & 0xf7ffffff);
- else /* Serial mode */
- {
- tmp = (clkRatio << 28) | 0x08000000; /* Set clock ratio */
- sysEUMBBARWrite(EPIC_INT_CONF_REG, tmp);
- }
-
- while (epicIntAck() != 0xff) /* Clear all pending interrupts */
- epicEOI();
-}
-
-/****************************************************************************
- * epicIntEnable - Enable an interrupt source
- *
- * This routine clears the mask bit of an external, an internal or
- * a Timer register to enable the interrupt.
- *
- * RETURNS: None
- */
-void epicIntEnable(int intVec)
-{
- ULONG tmp;
- ULONG srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr; /* Retrieve src Vec/Prio register */
- tmp = sysEUMBBARRead(srAddr);
- tmp &= ~EPIC_VEC_PRI_MASK; /* Clear the mask bit */
- tmp |= (EPIC_VEC_PRI_DFLT_PRI << 16); /* Set priority to Default - CLH */
- tmp |= intVec; /* Set Vector number */
- sysEUMBBARWrite(srAddr, tmp);
-
- return;
- }
-
-/****************************************************************************
- * epicIntDisable - Disable an interrupt source
- *
- * This routine sets the mask bit of an external, an internal or
- * a Timer register to disable the interrupt.
- *
- * RETURNS: OK or ERROR
- *
- */
-
-void epicIntDisable
- (
- int intVec /* Interrupt vector number */
- )
- {
-
- ULONG tmp, srAddr;
-
- srAddr = SrcVecTable[intVec].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- tmp |= 0x80000000; /* Set the mask bit */
- sysEUMBBARWrite(srAddr, tmp);
- return;
- }
-
-/****************************************************************************
- * epicIntSourceConfig - Set properties of an interrupt source
- *
- * This function sets interrupt properites (Polarity, Sense, Interrupt
- * Prority, and Interrupt Vector) of an Interrupt Source. The properties
- * can be set when the current source is not in-request or in-service,
- * which is determined by the Activity bit. This routine return ERROR
- * if the the Activity bit is 1 (in-request or in-service).
- *
- * This function assumes that the Source Vector/Priority register (input)
- * is a valid address.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicIntSourceConfig
- (
- int Vect, /* interrupt source vector number */
- int Polarity, /* interrupt source polarity */
- int Sense, /* interrupt source Sense */
- int Prio /* interrupt source priority */
- )
-
- {
- ULONG tmp, newVal;
- ULONG actBit, srAddr;
-
- srAddr = SrcVecTable[Vect].srcAddr;
- tmp = sysEUMBBARRead(srAddr);
- actBit = (tmp & 40000000) >> 30; /* retrieve activity bit - bit 30 */
- if (actBit == 1)
- return ERROR;
-
- tmp &= 0xff30ff00; /* Erase previously set P,S,Prio,Vector bits */
- newVal = (Polarity << 23) | (Sense << 22) | (Prio << 16) | Vect;
- sysEUMBBARWrite(srAddr, tmp | newVal );
- return (OK);
- }
-
-/****************************************************************************
- * epicIntAck - acknowledge an interrupt
- *
- * This function reads the Interrupt acknowldge register and return
- * the vector number of the highest pending interrupt.
- *
- * RETURNS: Interrupt Vector number.
- */
-
-unsigned int epicIntAck(void)
-{
- return(sysEUMBBARRead( EPIC_PROC_INT_ACK_REG ));
-}
-
-/****************************************************************************
- * epicEOI - signal an end of interrupt
- *
- * This function writes 0x0 to the EOI register to signal end of interrupt.
- * It is usually called after an interrupt routine is served.
- *
- * RETURNS: None
- */
-
-void epicEOI(void)
- {
- sysEUMBBARWrite(EPIC_PROC_EOI_REG, 0x0);
- }
-
-/****************************************************************************
- * epicCurTaskPrioSet - sets the priority of the Processor Current Task
- *
- * This function should be called after epicInit() to lower the priority
- * of the processor current task.
- *
- * RETURNS: OK or ERROR
- */
-
-int epicCurTaskPrioSet
- (
- int prioNum /* New priority value */
- )
- {
-
- if ( (prioNum < 0) || (prioNum > 0xF))
- return ERROR;
- sysEUMBBARWrite(EPIC_PROC_CTASK_PRI_REG, prioNum);
- return OK;
- }
-
-
-/************************************************************************
- * function: epicIntTaskGet
- *
- * description: Get value of processor current interrupt task priority register
- *
- * note:
- ***********************************************************************/
-unsigned char epicIntTaskGet()
-{
- /* get the interrupt task priority register */
- ULONG reg;
- unsigned char rec;
-
- reg = sysEUMBBARRead( EPIC_PROC_CTASK_PRI_REG );
- rec = ( reg & 0x0F );
- return rec;
-}
-
-
-/**************************************************************
- * function: epicISR
- *
- * description: EPIC service routine called by the core exception
- * at 0x500
- *
- * note:
- **************************************************************/
-unsigned int epicISR(void)
-{
- return 0;
-}
-
-
-/************************************************************
- * function: epicModeGet
- *
- * description: query EPIC mode, return 0 if pass through mode
- * return 1 if mixed mode
- *
- * note:
- *************************************************************/
-unsigned int epicModeGet(void)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_GLOBAL_REG );
- return (( val & 0x20000000 ) >> 29);
-}
-
-
-/*********************************************
- * function: epicConfigGet
- *
- * description: Get the EPIC interrupt Configuration
- * return 0 if not error, otherwise return 1
- *
- * note:
- ********************************************/
-void epicConfigGet( unsigned int *clkRatio, unsigned int *serEnable)
-{
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_INT_CONF_REG );
- *clkRatio = ( val & 0x70000000 ) >> 28;
- *serEnable = ( val & 0x8000000 ) >> 27;
-}
-
-
-/*******************************************************************
- * sysEUMBBARRead - Read a 32-bit EUMBBAR register
- *
- * This routine reads the content of a register in the Embedded
- * Utilities Memory Block, and swaps to big endian before returning
- * the value.
- *
- * RETURNS: The content of the specified EUMBBAR register.
- */
-
-ULONG sysEUMBBARRead
- (
- ULONG regNum
- )
- {
- ULONG temp;
-
- temp = *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum);
- return ( LONGSWAP(temp));
- }
-
-/*******************************************************************
- * sysEUMBBARWrite - Write a 32-bit EUMBBAR register
- *
- * This routine swaps the value to little endian then writes it to
- * a register in the Embedded Utilities Memory Block address space.
- *
- * RETURNS: N/A
- */
-
-void sysEUMBBARWrite
- (
- ULONG regNum, /* EUMBBAR register address */
- ULONG regVal /* Value to be written */
- )
- {
-
- *(ULONG *) (CONFIG_SYS_EUMB_ADDR + regNum) = LONGSWAP(regVal);
- return ;
- }
-
-
-/********************************************************
- * function: epicVendorId
- *
- * description: return the EPIC Vendor Identification
- * register:
- *
- * siliccon version, device id, and vendor id
- *
- * note:
- ********************************************************/
-void epicVendorId
- (
- unsigned int *step,
- unsigned int *devId,
- unsigned int *venId
- )
- {
- ULONG val;
- val = sysEUMBBARRead( EPIC_VENDOR_ID_REG );
- *step = ( val & 0x00FF0000 ) >> 16;
- *devId = ( val & 0x0000FF00 ) >> 8;
- *venId = ( val & 0x000000FF );
- }
-
-/**************************************************
- * function: epicFeatures
- *
- * description: return the number of IRQ supported,
- * number of CPU, and the version of the
- * OpenEPIC
- *
- * note:
- *************************************************/
-void epicFeatures
- (
- unsigned int *noIRQs,
- unsigned int *noCPUs,
- unsigned int *verId
- )
- {
- ULONG val;
-
- val = sysEUMBBARRead( EPIC_FEATURES_REG );
- *noIRQs = ( val & 0x07FF0000 ) >> 16;
- *noCPUs = ( val & 0x00001F00 ) >> 8;
- *verId = ( val & 0x000000FF );
-}
-
-
-/*********************************************************
- * function: epciTmFrequncySet
- *
- * description: Set the timer frequency reporting register
- ********************************************************/
-void epicTmFrequencySet( unsigned int frq )
-{
- sysEUMBBARWrite(EPIC_TM_FREQ_REG, frq);
-}
-
-/*******************************************************
- * function: epicTmFrequncyGet
- *
- * description: Get the current value of the Timer Frequency
- * Reporting register
- *
- ******************************************************/
-unsigned int epicTmFrequencyGet(void)
-{
- return( sysEUMBBARRead(EPIC_TM_FREQ_REG)) ;
-}
-
-
-/****************************************************
- * function: epicTmBaseSet
- *
- * description: Set the #n global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ****************************************************/
-unsigned int epicTmBaseSet
- (
- ULONG srcAddr, /* Address of the Timer Base register */
- unsigned int cnt, /* Base count */
- unsigned int inhibit /* 1 - count inhibit */
- )
-{
-
- unsigned int val = 0x80000000;
- /* First inhibit counting the timer */
- sysEUMBBARWrite(srcAddr, val) ;
-
- /* set the new value */
- val = (cnt & 0x7fffffff) | ((inhibit & 0x1) << 31);
- sysEUMBBARWrite(srcAddr, val) ;
- return 0;
-}
-
-/***********************************************************************
- * function: epicTmBaseGet
- *
- * description: Get the current value of the global timer base count register
- * return 0 if no error, otherwise return 1.
- *
- * note:
- ***********************************************************************/
-unsigned int epicTmBaseGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-/***********************************************************
- * function: epicTmCountGet
- *
- * description: Get the value of a given global timer
- * current count register
- * return 0 if no error, otherwise return 1
- * note:
- **********************************************************/
-unsigned int epicTmCountGet( ULONG srcAddr, unsigned int *val )
-{
- *val = sysEUMBBARRead( srcAddr );
- *val = *val & 0x7fffffff;
- return 0;
-}
-
-
-/***********************************************************
- * function: epicTmInhibit
- *
- * description: Stop counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- ***********************************************************/
-unsigned int epicTmInhibit( unsigned int srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val |= 0x80000000;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-/******************************************************************
- * function: epicTmEnable
- *
- * description: Enable counting of a given global timer
- * return 0 if no error, otherwise return 1
- *
- * note:
- *****************************************************************/
-unsigned int epicTmEnable( ULONG srcAddr )
-{
- ULONG val;
-
- val = sysEUMBBARRead( srcAddr );
- val &= 0x7fffffff;
- sysEUMBBARWrite( srcAddr, val );
- return 0;
-}
-
-void epicSourcePrint(int Vect)
- {
- ULONG srcVal;
-
- srcVal = sysEUMBBARRead(SrcVecTable[Vect].srcAddr);
- PRINT("%s\n", SrcVecTable[Vect].srcName);
- PRINT("Address = 0x%lx\n", SrcVecTable[Vect].srcAddr);
- PRINT("Vector = %ld\n", (srcVal & 0x000000FF) );
- PRINT("Mask = %ld\n", srcVal >> 31);
- PRINT("Activitiy = %ld\n", (srcVal & 40000000) >> 30);
- PRINT("Polarity = %ld\n", (srcVal & 0x00800000) >> 23);
- PRINT("Sense = %ld\n", (srcVal & 0x00400000) >> 22);
- PRINT("Priority = %ld\n", (srcVal & 0x000F0000) >> 16);
- }
diff --git a/cpu/mpc824x/drivers/epic/epic2.S b/cpu/mpc824x/drivers/epic/epic2.S
deleted file mode 100644
index 52d19aa..0000000
--- a/cpu/mpc824x/drivers/epic/epic2.S
+++ /dev/null
@@ -1,196 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-
-/*********************************************
- * function: CoreExtIntEnable
- *
- * description: Enable 603e core external interrupt
- *
- * note: mtmsr is context-synchronization
- **********************************************/
- .text
- .align 2
- .global CoreExtIntEnable
-CoreExtIntEnable:
- mfmsr r3
-
- ori r3,r3,0x8000 /* enable external interrupt */
- mtmsr r3
-
- bclr 20, 0
-
-/*******************************************
- * function: CoreExtIntDisable
- *
- * description: Disable 603e core external interrupt
- *
- * note:
- *******************************************/
- .text
- .align 2
- .global CoreExtIntDisable
-CoreExtIntDisable:
- mfmsr r4
-
- xor r3,r3,r3
- or r3,r3,r4
-
- andis. r4,r4,0xffff
- andi. r3,r3,0x7fff /* disable external interrupt */
-
- or r3,r3,r4
- mtmsr r3
-
- bclr 20, 0
-
-/*********************************************************
- * function: epicEOI
- *
- * description: signal the EOI and restore machine status
- * Input: r3 - value of eumbbar
- * Output: r3 - value of eumbbar
- * r4 - ISR vector value
- * note:
- ********************************************************/
- .text
- .align 2
- .global epicEOI
-epicEOI:
- lis r5,0x0006 /* Build End Of Interrupt Register offset */
- ori r5,r5,0x00b0
- xor r7,r7,r7 /* Clear r7 */
- stwbrx r7,r5,r3 /* Save r7, writing to this register will
- * intidate the end of processing the
- * highest interrupt.
- */
- sync
-
- /* ---RESTORE MACHINE STATE */
- mfmsr r13 /* Clear Recoverable Interrupt bit in MSR */
- or r7,r7,r13
-
- andis. r7,r7,0xffff
- andi. r13,r13,0x7ffd /* (and disable interrupts) */
- or r13,r13,r7
- mtmsr r13
-
- lwz r13,0x1c(r1) /* pull ctr */
- mtctr r13
-
- lwz r13,0x18(r1) /* pull xer */
- mtctr r13
-
- lwz r13,0x14(r1) /* pull lr */
- mtctr r13
-
- lwz r13,0x10(r1) /* Pull SRR1 from stack */
- mtspr SRR1,r13 /* Restore SRR1 */
-
- lwz r13,0xc(r1) /* Pull SRR0 from stack */
- mtspr SRR0,r13 /* Restore SRR0 */
-
- lwz r13,0x8(r1) /* Pull User stack pointer from stack */
- mtspr SPRG1,r13 /* Restore SPRG1 */
-
- lwz r4,0x4(r1) /* vector value */
- lwz r3,0x0(r1) /* eumbbar */
- sync
-
- addi r1,r1,0x20 /* Deallocate stack */
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer */
- mfspr r1,SPRG1 /* Restore User stack pointer */
-
- bclr 20,0
-
-/***********************************************************
- * function: exception routine called by exception vector
- * at 0x500, external interrupt
- *
- * description: Kahlua EPIC controller
- *
- * input: r3 - content of eumbbar
- * output: r3 - ISR return value
- * r4 - Interrupt vector number
- * note:
- ***********************************************************/
-
- .text
- .align 2
- .global epic_exception
-
-epic_exception:
-
- /*---SAVE MACHINE STATE TO A STACK */
- mtspr SPRG1,r1 /* Save User stack pointer to SPRG1 */
- mfspr r1,SPRG0 /* Load Supervisor stack pointer into r1 */
-
- stwu r3,-0x20(r1) /* Push the value of eumbbar onto stack */
-
- mfspr r3,SPRG1 /* Push User stack pointer onto stack */
- stw r3,0x8(r1)
- mfspr r3,SRR0 /* Push SRR0 onto stack */
- stw r1,0xc(r1)
- mfspr r3,SRR1 /* Push SRR1 onto stack */
- stw r3,0x10(r1)
- mflr r3
- stw r3,0x14(r1) /* Push LR */
- mfxer r3
- stw r3,0x18(r1) /* Push Xer */
- mfctr r3
- stw r3,0x1c(r1) /* Push CTR */
-
- mtspr SPRG0,r1 /* Save updated Supervisor stack pointer
- * value to SPRG0
- */
- mfmsr r3
- ori r3,r3,0x0002 /* Set Recoverable Interrupt bit in MSR */
- mtmsr r3
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r6,0(r1) /* this is eumbbar */
- sync
-
- /* ---READ EPIC REGISTER: PROCESSOR INTERRUPT ACKNOWLEDGE REGISTER */
- lis r5,0x0006 /* Build Interrupt Acknowledge Register
- * offset
- */
- ori r5,r5,0x00a0
- lwbrx r7,r5,r6 /* Load interrupt vector into r7 */
- sync
-
- /* --MASK OFF ALL BITS EXCEPT THE VECTOR */
- xor r3,r3,r3
- xor r4,r4,r4
- or r3, r3, r6 /* eumbbar in r3 */
- andi. r4,r7,0x00ff /* Mask off bits, vector in r4 */
-
- stw r4,0x04(r1) /* save the vector value */
-
- lis r5,epicISR@ha
- ori r5,r5,epicISR@l
- mtlr r5
- blrl
-
- xor r30,r30,r30
- or r30,r30,r3 /* save the r3 which containts the return value from epicISR */
-
- /* ---READ IN THE EUMBAR REGISTER */
- lwz r3,0(r1)
- sync
-
- lis r5,epicEOI@ha
- ori r5,r5,epicEOI@l
- mtlr r5
- blrl
-
- xor r3,r3,r3
- or r3,r3,r30 /* restore the ISR return value */
-
- bclr 20,0
diff --git a/cpu/mpc824x/drivers/epic/epicutil.S b/cpu/mpc824x/drivers/epic/epicutil.S
deleted file mode 100644
index 4877050..0000000
--- a/cpu/mpc824x/drivers/epic/epicutil.S
+++ /dev/null
@@ -1,57 +0,0 @@
-/**************************************
- *
- * copyright @ Motorola, 1999
- *
- *
- * This file contains two commonly used
- * lower level utility routines.
- *
- * The utility routines are also in other
- * Kahlua device driver libraries. The
- * need to be linked in only once.
- **************************************/
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-/**********************************************************
- * function: load_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- *
- * output: r3 - register content
- **********************************************************/
- .text
- .align 2
- .global load_runtime_reg
-
-load_runtime_reg:
-
- xor r5,r5,r5
- or r5,r5,r3 /* save eumbbar */
-
- lwbrx r3,r4,r5
- sync
-
- bclr 20, 0
-
-/****************************************************************
- * function: store_runtime_reg
- *
- * input: r3 - value of eumbbar
- * r4 - register offset in embedded utility space
- * r5 - new value to be stored
- *
- ****************************************************************/
- .text
- .align 2
- .global store_runtime_reg
-store_runtime_reg:
-
- xor r0,r0,r0
-
- stwbrx r5, r4, r3
- sync
-
- bclr 20,0
diff --git a/cpu/mpc824x/drivers/errors.h b/cpu/mpc824x/drivers/errors.h
deleted file mode 100644
index 20794a2..0000000
--- a/cpu/mpc824x/drivers/errors.h
+++ /dev/null
@@ -1,212 +0,0 @@
-/* Copyright Motorola, Inc. 1993, 1994
- ALL RIGHTS RESERVED
-
- You are hereby granted a copyright license to use, modify, and
- distribute the SOFTWARE so long as this entire notice is retained
- without alteration in any modified and/or redistributed versions,
- and that such modified versions are clearly identified as such.
- No licenses are granted by implication, estoppel or otherwise under
- any patents or trademarks of Motorola, Inc.
-
- The SOFTWARE is provided on an "AS IS" basis and without warranty.
- To the maximum extent permitted by applicable law, MOTOROLA DISCLAIMS
- ALL WARRANTIES WHETHER EXPRESS OR IMPLIED, INCLUDING IMPLIED
- WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
- PURPOSE AND ANY WARRANTY AGAINST INFRINGEMENT WITH
- REGARD TO THE SOFTWARE (INCLUDING ANY MODIFIED VERSIONS
- THEREOF) AND ANY ACCOMPANYING WRITTEN MATERIALS.
-
- To the maximum extent permitted by applicable law, IN NO EVENT SHALL
- MOTOROLA BE LIABLE FOR ANY DAMAGES WHATSOEVER
- (INCLUDING WITHOUT LIMITATION, DAMAGES FOR LOSS OF
- BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
- INFORMATION, OR OTHER PECUNIARY LOSS) ARISING OF THE USE OR
- INABILITY TO USE THE SOFTWARE. Motorola assumes no responsibility
- for the maintenance and support of the SOFTWARE.
-
-*/
-
-
-#include "config.h"
-
-/*
- 1 2 3 4 5 6 7 8
-01234567890123456789012345678901234567890123456789012345678901234567890123456789
-*/
-/* List define statements here */
-
-/* These are for all the toolboxes and functions to use. These will help
-to standardize the error handling in the current project */
-
- /* this is the "data type" for the error
- messages in the system */
-#define STATUS unsigned int
-
- /* this is a success status code */
-#define SUCCESS 1
-
- /* likewise this is failure */
-#define FAILURE 0
-
-#define NUM_ERRORS 47
-
-/* This first section of "defines" are for error codes ONLY. The called
- routine will return one of these error codes to the caller. If the final
- returned code is "VALID", then everything is a-okay. However, if one
- of the functions returns a non-valid status, that error code should be
- propogated back to all the callers. At the end, the last caller will
- call an error_processing function, and send in the status which was
- returned. It's up to the error_processing function to determine which
- error occured (as indicated by the status), and print an appropriate
- message back to the user.
-*/
-/*----------------------------------------------------------------------*/
-/* these are specifically for the parser routines */
-
-#define UNKNOWN_COMMAND 0xfb00 /* "unrecognized command " */
-#define UNKNOWN_REGISTER 0xfb01 /* "unknown register "*/
-#define ILLEGAL_RD_STAGE 0xfb02 /* cannot specify reg. family in range*/
-#define ILLEGAL_REG_FAMILY 0xfb03 /* "cannot specify a range of special
- or miscellaneous registers"*/
-#define RANGE_CROSS_FAMILY 0xfb04 /* "cannot specify a range across
- register families" */
-#define UNIMPLEMENTED_STAGE 0xfb05 /* invalid rd or rmm parameter format */
-#define REG_NOT_WRITEABLE 0xfb06 /* "unknown operator in arguements"*/
-#define INVALID_FILENAME 0xfb07 /* "invalid download filename" */
-#define INVALID_BAUD_RATE 0xfb08 /* invalid baud rate from sb command */
-#define UNSUPPORTED_REGISTER 0xfb09 /* Special register is not supported */
-#define FOR_BOARD_ONLY 0xfb0a /* "Not available for Unix." */
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the error checking toolbox */
-
-#define INVALID 0xfd00 /* NOT valid */
-#define VALID 0xfd01 /* valid */
-
- /* This error is found in the fcn:
- is_right_size_input() to indicate
- that the input was not 8 characters
- long. */
-#define INVALID_SIZE 0xfd02
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the address given falls outside
- of valid memory defined by MEM_START
- to MEM_END.
- */
-#define OUT_OF_BOUNDS_ADDRESS 0xfd03
-
- /* This error is found in the fcn:
- is_valid_hex_input() to indicate that
- one of more of the characters entered
- are not valid hex characters. Valid
- hex characters are 0-9, A-F, a-f.
- */
-#define INVALID_HEX_INPUT 0xfd04
-
- /* This error is found in the fcn:
- is_valid_register_number() to indicate
- that a given register does not exist.
- */
-#define REG_NOT_READABLE 0xfd05
-
- /* This error is found in the fcn:
- is_word_aligned_address() to indicate
- that the given address is not word-
- aligned. A word-aligned address ends
- in 0x0,0x4,0x8,0xc.
- */
-#define NOT_WORD_ALIGNED 0xfd07
-
- /* This error is found in the fcn:
- is_valid_address_range() to indicate
- that the starting address is greater
- than the ending address.
- */
-#define REVERSED_ADDRESS 0xfd08
-
- /* this error tells us that the address
- specified as the destination is within
- the source addresses */
-#define RANGE_OVERLAP 0xfd09
-
-
-#define ERROR 0xfd0a /* An error occured */
-#define INVALID_PARAM 0xfd0b /* "invalid input parameter " */
-
-
-#define INVALID_FLAG 0xfd0c /* invalid flag */
-
-/*----------------------------------------------------------------------*/
-/* these are for the getarg toolbox */
-
-#define INVALID_NUMBER_ARGS 0xFE00 /* invalid number of commd arguements */
-#define UNKNOWN_PARAMETER 0xFE01 /* "unknown type of parameter "*/
-
-
-/*----------------------------------------------------------------------*/
-/* these are for the tokenizer toolbox */
-
-#define ILLEGAL_CHARACTER 0xFF00 /* unrecognized char. in input stream*/
-#define TTL_NOT_SORTED 0xFF01 /* token translation list not sorted */
-#define TTL_NOT_DEFINED 0xFF02 /* token translation list not assigned*/
-#define INVALID_STRING 0xFF03 /* unable to extract string from input */
-#define BUFFER_EMPTY 0xFF04 /* "input buffer is empty" */
-#define INVALID_MODE 0xFF05 /* input buf is in an unrecognized mode*/
-#define TOK_INTERNAL_ERROR 0xFF06 /* "internal tokenizer error" */
-#define TOO_MANY_IBS 0xFF07 /* "too many open input buffers" */
-#define NO_OPEN_IBS 0xFF08 /* "no open input buffers" */
-
-
-/* these are for the read from screen toolbox */
-
-#define RESERVED_WORD 0xFC00 /* used a reserved word as an arguement*/
-
-
-/* these are for the breakpoint routines */
-
-#define FULL_BPDS 0xFA00 /* breakpoint data structure is full */
-
-
-/* THESE are for the downloader */
-
-#define NOT_IN_S_RECORD_FORMAT 0xf900 /* "not in S-Record Format" */
-#define UNREC_RECORD_TYPE 0xf901 /* "unrecognized record type" */
-#define CONVERSION_ERROR 0xf902 /* "ascii to int conversion error" */
-#define INVALID_MEMORY 0xf903 /* "bad s-record memory address " */
-
-
-/* these are for the compression and decompression stuff */
-
-#define COMP_UNK_CHARACTER 0xf800 /* "unknown compressed character " */
-
-#define COMP_UNKNOWN_STATE 0xf801 /* "unknown binary state" */
-
-#define NOT_IN_COMPRESSED_FORMAT 0xf802 /* not in compressed S-Record format */
-
-
-/* these are for the DUART handling things */
-
- /* "unrecognized serial port configuration" */
-#define UNKNOWN_PORT_STATE 0xf700
-
-
-/* these are for the register toolbox */
-
- /* "cannot find register in special
- purpose register file " */
-#define SPR_NOT_FOUND 0xf600
-
-
-/* these are for the duart specific stuff */
-
- /* "transparent mode needs access to
- two serial ports" */
-#define TM_NEEDS_BOTH_PORTS 0xf500
-
-
-/*----------------------------------------------------------------------*/
-/* these are specifically for the flash routines */
-#define FLASH_ERROR 0xf100 /* general flash error */
diff --git a/cpu/mpc824x/drivers/i2c/i2c.c b/cpu/mpc824x/drivers/i2c/i2c.c
deleted file mode 100644
index 637ae4c..0000000
--- a/cpu/mpc824x/drivers/i2c/i2c.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * (C) Copyright 2003
- * Gleb Natapov <gnatapov@mrv.com>
- * Some bits are taken from linux driver writen by adrian@humboldt.co.uk
- *
- * Hardware I2C driver for MPC107 PCI bridge.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#undef I2CDBG
-
-#ifdef CONFIG_HARD_I2C
-#include <i2c.h>
-
-#define TIMEOUT (CONFIG_SYS_HZ/4)
-
-#define I2C_Addr ((unsigned *)(CONFIG_SYS_EUMB_ADDR + 0x3000))
-
-#define I2CADR &I2C_Addr[0]
-#define I2CFDR &I2C_Addr[1]
-#define I2CCCR &I2C_Addr[2]
-#define I2CCSR &I2C_Addr[3]
-#define I2CCDR &I2C_Addr[4]
-
-#define MPC107_CCR_MEN 0x80
-#define MPC107_CCR_MIEN 0x40
-#define MPC107_CCR_MSTA 0x20
-#define MPC107_CCR_MTX 0x10
-#define MPC107_CCR_TXAK 0x08
-#define MPC107_CCR_RSTA 0x04
-
-#define MPC107_CSR_MCF 0x80
-#define MPC107_CSR_MAAS 0x40
-#define MPC107_CSR_MBB 0x20
-#define MPC107_CSR_MAL 0x10
-#define MPC107_CSR_SRW 0x04
-#define MPC107_CSR_MIF 0x02
-#define MPC107_CSR_RXAK 0x01
-
-#define I2C_READ 1
-#define I2C_WRITE 0
-
-/* taken from linux include/asm-ppc/io.h */
-inline unsigned in_le32 (volatile unsigned *addr)
-{
- unsigned ret;
-
- __asm__ __volatile__ ("lwbrx %0,0,%1;\n"
- "twi 0,%0,0;\n"
- "isync":"=r" (ret): "r" (addr), "m" (*addr));
- return ret;
-}
-
-inline void out_le32 (volatile unsigned *addr, int val)
-{
- __asm__ __volatile__ ("stwbrx %1,0,%2; eieio":"=m" (*addr):"r" (val),
- "r" (addr));
-}
-
-#define writel(val, addr) out_le32(addr, val)
-#define readl(addr) in_le32(addr)
-
-void i2c_init (int speed, int slaveadd)
-{
- /* stop I2C controller */
- writel (0x0, I2CCCR);
- /* set clock */
- writel (0x1020, I2CFDR);
- /* write slave address */
- writel (slaveadd, I2CADR);
- /* clear status register */
- writel (0x0, I2CCSR);
- /* start I2C controller */
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return;
-}
-
-static __inline__ int i2c_wait4bus (void)
-{
- ulong timeval = get_timer (0);
-
- while (readl (I2CCSR) & MPC107_CSR_MBB)
- if (get_timer (timeval) > TIMEOUT)
- return -1;
-
- return 0;
-}
-
-static __inline__ int i2c_wait (int write)
-{
- u32 csr;
- ulong timeval = get_timer (0);
-
- do {
- csr = readl (I2CCSR);
-
- if (!(csr & MPC107_CSR_MIF))
- continue;
-
- writel (0x0, I2CCSR);
-
- if (csr & MPC107_CSR_MAL) {
-#ifdef I2CDBG
- printf ("i2c_wait: MAL\n");
-#endif
- return -1;
- }
-
- if (!(csr & MPC107_CSR_MCF)) {
-#ifdef I2CDBG
- printf ("i2c_wait: unfinished\n");
-#endif
- return -1;
- }
-
- if (write == I2C_WRITE && (csr & MPC107_CSR_RXAK)) {
-#ifdef I2CDBG
- printf ("i2c_wait: No RXACK\n");
-#endif
- return -1;
- }
-
- return 0;
- } while (get_timer (timeval) < TIMEOUT);
-
-#ifdef I2CDBG
- printf ("i2c_wait: timed out\n");
-#endif
- return -1;
-}
-
-static __inline__ int i2c_write_addr (u8 dev, u8 dir, int rsta)
-{
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX |
- (rsta ? MPC107_CCR_RSTA : 0), I2CCCR);
-
- writel ((dev << 1) | dir, I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- return 0;
-
- return 1;
-}
-
-static __inline__ int __i2c_write (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA | MPC107_CCR_MTX, I2CCCR);
-
- for (i = 0; i < length; i++) {
- writel (data[i], I2CCDR);
-
- if (i2c_wait (I2C_WRITE) < 0)
- break;
- }
-
- return i;
-}
-
-static __inline__ int __i2c_read (u8 * data, int length)
-{
- int i;
-
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- ((length == 1) ? MPC107_CCR_TXAK : 0), I2CCCR);
-
- /* dummy read */
- readl (I2CCDR);
-
- for (i = 0; i < length; i++) {
- if (i2c_wait (I2C_READ) < 0)
- break;
-
- /* Generate ack on last next to last byte */
- if (i == length - 2)
- writel (MPC107_CCR_MEN | MPC107_CCR_MSTA |
- MPC107_CCR_TXAK, I2CCCR);
-
- /* Generate stop on last byte */
- if (i == length - 1)
- writel (MPC107_CCR_MEN | MPC107_CCR_TXAK, I2CCCR);
-
- data[i] = readl (I2CCDR);
- }
-
- return i;
-}
-
-int i2c_read (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_READ, 1) == 0)
- goto exit;
-
- i = __i2c_read (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_write (u8 dev, uint addr, int alen, u8 * data, int length)
-{
- int i = 0;
- u8 *a = (u8 *) & addr;
-
- if (i2c_wait4bus () < 0)
- goto exit;
-
- if (i2c_write_addr (dev, I2C_WRITE, 0) == 0)
- goto exit;
-
- if (__i2c_write (&a[4 - alen], alen) != alen)
- goto exit;
-
- i = __i2c_write (data, length);
-
-exit:
- writel (MPC107_CCR_MEN, I2CCCR);
-
- return !(i == length);
-}
-
-int i2c_probe (uchar chip)
-{
- int tmp;
-
- /*
- * Try to read the first location of the chip. The underlying
- * driver doesn't appear to support sending just the chip address
- * and looking for an <ACK> back.
- */
- udelay (10000);
- return i2c_read (chip, 0, 1, (uchar *) &tmp, 1);
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc824x/drivers/i2c_export.h b/cpu/mpc824x/drivers/i2c_export.h
deleted file mode 100644
index 6264d18..0000000
--- a/cpu/mpc824x/drivers/i2c_export.h
+++ /dev/null
@@ -1,103 +0,0 @@
-#ifndef I2C_EXPORT_H
-#define I2C_EXPORT_H
-
-/****************************************************
- *
- * Copyright Motrola 1999
- *
- ****************************************************/
-
-/* These are the defined return values for the I2C_do_transaction function.
- * Any non-zero value indicates failure. Failure modes can be added for
- * more detailed error reporting.
- */
-typedef enum _i2c_status
-{
- I2C_SUCCESS = 0,
- I2C_ERROR,
-} I2C_Status;
-
-/* These are the defined tasks for I2C_do_transaction.
- * Modes for SLAVE_RCV and SLAVE_XMIT will be added.
- */
-typedef enum _i2c_transaction_mode
-{
- I2C_MASTER_RCV = 0,
- I2C_MASTER_XMIT = 1,
-} I2C_TRANSACTION_MODE;
-
-typedef enum _i2c_interrupt_mode
-{
- I2C_INT_DISABLE = 0,
- I2C_INT_ENABLE = 1,
-} I2C_INTERRUPT_MODE;
-
-typedef enum _i2c_stop
-{
- I2C_NO_STOP = 0,
- I2C_STOP = 1,
-} I2C_STOP_MODE;
-
-typedef enum _i2c_restart
-{
- I2C_NO_RESTART = 0,
- I2C_RESTART = 1,
-} I2C_RESTART_MODE;
-
-/******************** App. API ********************
- * The application API is for user level application
- * to use the functionality provided by I2C driver.
- * This is a "generic" I2C interface, it should contain
- * nothing specific to the Kahlua implementation.
- * Only the generic functions are exported by the library.
- *
- * Note: Its App.s responsibility to swap the data
- * byte. In our API, we just transfer whatever
- * we are given
- **************************************************/
-
-
-/* Initialize I2C unit with the following:
- * driver's slave address
- * interrupt enabled
- * optional pointer to application layer print function
- *
- * These parameters may be added:
- * desired clock rate
- * digital filter frequency sampling rate
- *
- * This function must be called before I2C unit can be used.
- */
-extern I2C_Status I2C_Initialize(
- unsigned char addr, /* driver's I2C slave address */
- I2C_INTERRUPT_MODE en_int, /* 1 - enable I2C interrupt
- * 0 - disable I2C interrupt
- */
- int (*app_print_function)(char *,...)); /* pointer to optional "printf"
- * provided by application
- */
-
-/* Perform the given I2C transaction, only MASTER_XMIT and MASTER_RCV
- * are implemented. Both are only in polling mode.
- *
- * en_int controls interrupt/polling mode
- * act is the type of transaction
- * addr is the I2C address of the slave device
- * len is the length of data to send or receive
- * buffer is the address of the data buffer
- * stop = I2C_NO_STOP, don't signal STOP at end of transaction
- * I2C_STOP, signal STOP at end of transaction
- * retry is the timeout retry value, currently ignored
- * rsta = I2C_NO_RESTART, this is not continuation of existing transaction
- * I2C_RESTART, this is a continuation of existing transaction
- */
-extern I2C_Status I2C_do_transaction( I2C_INTERRUPT_MODE en_int,
- I2C_TRANSACTION_MODE act,
- unsigned char i2c_addr,
- unsigned char data_addr,
- int len,
- char *buffer,
- I2C_STOP_MODE stop,
- int retry,
- I2C_RESTART_MODE rsta);
-#endif
diff --git a/cpu/mpc824x/interrupts.c b/cpu/mpc824x/interrupts.c
deleted file mode 100644
index 139c52c..0000000
--- a/cpu/mpc824x/interrupts.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-#include <commproc.h>
-#include "drivers/epic.h"
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- *decrementer_count = (get_bus_freq (0) / 4) / CONFIG_SYS_HZ;
-
- /*
- * It's all broken at the moment and I currently don't need
- * interrupts. If you want to fix it, have a look at the epic
- * drivers in dink32 v12. They do everthing and Motorola said
- * I could use the dink source in this project as long as
- * copyright notices remain intact.
- */
-
- epicInit (EPIC_DIRECT_IRQ, 0);
- /* EPIC won't generate INT unless Current Task Pri < 15 */
- epicCurTaskPrioSet(0);
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- register unsigned long temp;
-
- pci_readl (CONFIG_SYS_EUMB_ADDR + EPIC_PROC_INT_ACK_REG, temp);
- sync (); /* i'm not convinced this is needed, but dink source has it */
- temp &= 0xff; /*get vector */
-
- /*TODO: handle them -... */
- epicEOI ();
-}
-
-/****************************************************************************/
-
-/*
- * blank int handlers.
- */
-
-void
-irq_install_handler (int vec, interrupt_handler_t * handler, void *arg)
-{
-}
-
-void irq_free_handler (int vec)
-{
-
-}
-
-/*TODO: some handlers for winbond and 87308 interrupts
- and what about generic pci inteerupts?
- vga?
- */
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
diff --git a/cpu/mpc824x/pci.c b/cpu/mpc824x/pci.c
deleted file mode 100644
index cf9cf41..0000000
--- a/cpu/mpc824x/pci.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * arch/ppc/kernel/mpc10x_common.c
- *
- * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
- * Mem ctlr, EPIC, etc.
- *
- * Author: Mark A. Greer
- * mgreer@mvista.com
- *
- * Copyright 2001 MontaVista Software Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-#include <mpc824x.h>
-
-void pci_mpc824x_init (struct pci_controller *hose)
-{
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
- pci_set_region(hose->regions + 0,
- CHRP_PCI_MEMORY_BUS,
- CHRP_PCI_MEMORY_PHYS,
- CHRP_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-
- /* PCI memory space */
- pci_set_region(hose->regions + 1,
- CHRP_PCI_MEM_BUS,
- CHRP_PCI_MEM_PHYS,
- CHRP_PCI_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* ISA/PCI memory space */
- pci_set_region(hose->regions + 2,
- CHRP_ISA_MEM_BUS,
- CHRP_ISA_MEM_PHYS,
- CHRP_ISA_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + 3,
- CHRP_PCI_IO_BUS,
- CHRP_PCI_IO_PHYS,
- CHRP_PCI_IO_SIZE,
- PCI_REGION_IO);
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + 4,
- CHRP_ISA_IO_BUS,
- CHRP_ISA_IO_PHYS,
- CHRP_ISA_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 5;
-
- pci_setup_indirect(hose,
- CHRP_REG_ADDR,
- CHRP_REG_DATA);
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#endif
diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c
deleted file mode 100644
index fdcb972..0000000
--- a/cpu/mpc824x/speed.c
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Gregory E. Allen, gallen@arlut.utexas.edu
- * Applied Research Laboratories, The University of Texas at Austin
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency on
- * PCI_SYNC_IN .
- *
- * CONFIG_PLL_PCI_TO_MEM_MULTIPLIER is only required on MPC8240
- * boards. It should be defined as the PCI to Memory Multiplier as
- * documented in the MPC8240 Hardware Specs.
- *
- * Other mpc824x boards don't need CONFIG_PLL_PCI_TO_MEM_MULTIPLIER
- * because they can determine it from the PCR.
- *
- * Gary Milliorn <gary.milliorn@motorola.com> (who should know since
- * he designed the Sandpoint) told us that the PCR is not in all revs
- * of the MPC8240 CPU, so it's not guaranteeable and we cannot do
- * away with CONFIG_PLL_PCI_TO_MEM_MULTIPLIER altogether.
- */
-/* ------------------------------------------------------------------------- */
-
-/* This gives the PCI to Memory multiplier times 10 */
-/* The index is the value of PLL_CFG[0:4] */
-/* This is documented in the MPC8240/5 Hardware Specs */
-
-short pll_pci_to_mem_multiplier[] = {
-#if defined(CONFIG_MPC8240)
- 30, 30, 10, 10, 20, 10, 0, 10,
- 10, 0, 20, 0, 20, 0, 20, 0,
- 30, 0, 15, 0, 20, 0, 20, 0,
- 25, 0, 10, 0, 15, 15, 0, 0,
-#elif defined(CONFIG_MPC8245)
- 30, 30, 10, 10, 20, 10, 10, 10,
- 10, 20, 20, 15, 20, 15, 20, 30,
- 30, 40, 15, 40, 20, 25, 20, 40,
- 25, 20, 10, 20, 15, 15, 15, 0,
-#else
-#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
-#endif
-};
-
-#define CU824_PLL_STATE_REG 0xFE80002F
-#define PCR 0x800000E2
-
-/* ------------------------------------------------------------------------- */
-
-/* compute the memory bus clock frequency */
-ulong get_bus_freq (ulong dummy)
-{
- unsigned char pll_cfg;
-#if defined(CONFIG_MPC8240) && !defined(CONFIG_CU824)
- return (CONFIG_SYS_CLK_FREQ) * (CONFIG_PLL_PCI_TO_MEM_MULTIPLIER);
-#elif defined(CONFIG_CU824)
- pll_cfg = *(volatile unsigned char *) (CU824_PLL_STATE_REG);
- pll_cfg &= 0x1f;
-#else
- CONFIG_READ_BYTE(PCR, pll_cfg);
- pll_cfg = (pll_cfg >> 3) & 0x1f;
-#endif
- return ((CONFIG_SYS_CLK_FREQ) * pll_pci_to_mem_multiplier[pll_cfg] + 5) / 10;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/* This gives the Memory to CPU Core multiplier times 10 */
-/* The index is the value of PLLRATIO in HID1 */
-/* This is documented in the MPC8240 Hardware Specs */
-/* This is not documented for MPC8245 ? FIXME */
-short pllratio_to_factor[] = {
- 0, 0, 0, 10, 20, 20, 25, 45,
- 30, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 10, 0, 0, 0, 45,
- 30, 0, 40, 0, 0, 0, 35, 0,
-};
-
-/* compute the CPU and memory bus clock frequencies */
-int get_clocks (void)
-{
- uint hid1 = mfspr(HID1);
- hid1 = (hid1 >> (32-5)) & 0x1f;
- gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5)
- / 10;
- gd->bus_clk = get_bus_freq(0);
- return (0);
-}
diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S
deleted file mode 100644
index f3f595a..0000000
--- a/cpu/mpc824x/start.S
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <mpc824x.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* FP, Machine Check and Recoverable Interr. */
-#define MSR_KERNEL ( MSR_FP | MSR_ME | MSR_RI )
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
-#if defined(CONFIG_FADS)
- GOT_ENTRY(environment)
-#endif
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set FP, ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- addis r0,0,0x0000 /* lets make sure that r0 is really 0 */
- mtspr HID0, r0 /* disable I and D caches */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- mfmsr r3 /* turn off address translation */
- addis r4,0,0xffff
- ori r4,r4,0xffcf
- and r3,r3,r4
- mtmsr r3
- isync
- sync /* the MMU should be off... */
-
-
-in_flash:
-#if defined(CONFIG_BMW)
- bl early_init_f /* Must be ASM: no stack yet! */
-#endif
- /*
- * Setup BATs - cannot be done in C since we don't have a stack yet
- */
- bl setup_bats
-
- /* Enable MMU.
- */
- mfmsr r3
- ori r3, r3, (MSR_IR | MSR_DR)
- mtmsr r3
-#if !defined(CONFIG_BMW)
- /* Enable and invalidate data cache.
- */
- mfspr r3, HID0
- mr r2, r3
- ori r3, r3, HID0_DCE | HID0_DCI
- ori r2, r2, HID0_DCE
- sync
- mtspr HID0, r3
- mtspr HID0, r2
- sync
-
- /* Allocate Initial RAM in data cache.
- */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- li r2, 128
- mtctr r2
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock way0 in data cache.
- */
- mfspr r3, 1011
- lis r2, 0xffff
- ori r2, r2, 0xff1f
- and r3, r3, r2
- ori r3, r3, 0x0080
- sync
- mtspr 1011, r3
-#endif /* !CONFIG_BMW */
- /*
- * Thisk the stack pointer *somewhere* sensible. Doesnt
- * matter much where as we'll move it when we relocate
- */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(EXC_OFF_MACH_CHCK, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_DATA_STOR, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(EXC_OFF_INS_STOR, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(EXC_OFF_EXTERNAL, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = EXC_OFF_ALIGN
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = EXC_OFF_PROGRAM
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(EXC_OFF_FPUNAVAIL, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(EXC_OFF_DECR, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_TRACE, SingleStep, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_FPUNASSIST, Trap_0e, UnknownException)
- STD_EXCEPTION(EXC_OFF_PMI, Trap_0f, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_ITME, InstructionTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DLTME, DataLoadTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_DSTME, DataStoreTransMiss, UnknownException)
- STD_EXCEPTION(EXC_OFF_IABE, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(EXC_OFF_SMIE, SysManageInt, UnknownException)
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
- STD_EXCEPTION(0x1c00, ReservedC, UnknownException)
- STD_EXCEPTION(0x1d00, ReservedD, UnknownException)
- STD_EXCEPTION(0x1e00, ReservedE, UnknownException)
- STD_EXCEPTION(0x1f00, ReservedF, UnknownException)
-
- STD_EXCEPTION(EXC_OFF_RMTE, RunModeTrace, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
-#if 0
- andi. r23,r23,MSR_PR
- mfspr r23,SPRG3 /* if from user, fix up tss.regs */
- beq 2f
- addi r24,r1,STACK_FRAME_OVERHEAD
- stw r24,PT_REGS(r23)
-2: addi r2,r23,-TSS /* set r2 to current */
- tovirt(r2,r2,r23)
-#endif
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
-#if 0
- addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */
- cmplw 0,r1,r2
- cmplw 1,r1,r24
- crand 1,1,4
- bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */
-#endif
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- ori r20,r20,0x30 /* enable IR, DR */
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- mfspr r5,HID0 /* turn on the I cache. */
- ori r5,r5,0x8800 /* Instruction cache only! */
- addis r6,0,0xFFFF
- ori r6,r6,0xF7FF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0x7FFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- srwi r3, r3, 15 /* >>15 & 1=> select bit 16 */
- andi. r3, r3, 1
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r5,HID0 /* turn on the D cache. */
- ori r5,r5,0x4400 /* Data cache only! */
- mfspr r4, PVR /* read PVR */
- srawi r3, r4, 16 /* shift off the least 16 bits */
- cmpi 0, 0, r3, 0xC /* Check for Max pvr */
- bne NotMax
- ori r5,r5,0x0040 /* setting the DCFA bit, for Max rev 1 errata */
-NotMax:
- addis r6,0,0xFFFF
- ori r6,r6,0xFBFF
- and r6,r5,r6 /* clear the invalidate bit */
- sync
- mtspr HID0,r5
- mtspr HID0,r6
- isync
- sync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r5,HID0
- addis r6,0,0xFFFF
- ori r6,r6,0xBFFF
- and r5,r5,r6
- sync
- mtspr HID0,r5
- isync
- sync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- srwi r3, r3, 14 /* >>14 & 1=> select bit 17 */
- andi. r3, r3, 1
- blr
-
- .globl dc_read
-dc_read:
-/*TODO : who uses this, what should it do?
-*/
- blr
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
-
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
-#ifdef CONFIG_SYS_RAMBOOT
- lis r4, CONFIG_SYS_SDRAM_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_SDRAM_BASE@l
-#else
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
-#endif
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* the the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-4:
-#if !defined(CONFIG_BMW)
-/* Unlock the data cache and invalidate locked area */
- xor r0, r0, r0
- mtspr 1011, r0
- lis r4, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_ADDR@l
- li r0, 128
- mtctr r0
-41:
- dcbi r0, r4
- addi r4, r4, 32
- bdnz 41b
-#endif
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
- cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- blt 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
-
- /* Setup the BAT registers.
- */
-setup_bats:
- lis r4, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- lis r3, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- lis r3, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- lis r3, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- lis r3, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- lis r3, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- lis r3, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
- isync
-
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- lis r4, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- lis r3, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
- /* Invalidate TLBs.
- * -> for (val = 0; val < 0x20000; val+=0x1000)
- * -> tlbie(val);
- */
- lis r3, 0
- lis r5, 2
-
-1:
- tlbie r3
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt 1b
-
- blr
diff --git a/cpu/mpc824x/traps.c b/cpu/mpc824x/traps.c
deleted file mode 100644
index 0a72430..0000000
--- a/cpu/mpc824x/traps.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <asm/processor.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x00400000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc824x/u-boot.lds b/cpu/mpc824x/u-boot.lds
deleted file mode 100644
index 0eac48f..0000000
--- a/cpu/mpc824x/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc824x/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc8260/Makefile b/cpu/mpc8260/Makefile
deleted file mode 100644
index 9f0c2dd..0000000
--- a/cpu/mpc8260/Makefile
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o kgdb.o
-COBJS = traps.o serial_smc.o serial_scc.o cpu.o cpu_init.o speed.o \
- interrupts.o ether_fcc.o i2c.o commproc.o \
- bedbug_603e.o pci.o spi.o
-
-COBJS-$(CONFIG_ETHER_ON_SCC) = ether_scc.o
-
-COBJS += $(COBJS-y)
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc8260/bedbug_603e.c b/cpu/mpc8260/bedbug_603e.c
deleted file mode 100644
index c969ff6..0000000
--- a/cpu/mpc8260/bedbug_603e.c
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * Bedbug Functions specific to the MPC603e core
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/type.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-
-#if defined(CONFIG_CMD_BEDBUG) \
- && (defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260))
-
-#define MAX_BREAK_POINTS 1
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug603e_init __P((void));
-void bedbug603e_do_break __P((cmd_tbl_t*,int,int,char*[]));
-void bedbug603e_break_isr __P((struct pt_regs*));
-int bedbug603e_find_empty __P((void));
-int bedbug603e_set __P((int,unsigned long));
-int bedbug603e_clear __P((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the processor. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug603e_init( void )
-{
- int i;
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug603e_do_break;
- bug_ctx.break_isr = bedbug603e_break_isr;
- bug_ctx.find_empty = bedbug603e_find_empty;
- bug_ctx.set = bedbug603e_set;
- bug_ctx.clear = bedbug603e_clear;
-
- for( i = 1; i <= MAX_BREAK_POINTS; ++i )
- (*bug_ctx.clear)( i );
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show the hardware breakpoint for the 603e. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug603e_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char *argv[])
-{
- long addr; /* Address to break at */
- int which_bp; /* Breakpoint number */
- /* -------------------------------------------------- */
-
- if (argc < 2)
- {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if( strcmp( argv[ 1 ], "off" ) == 0 )
- {
- if( bug_ctx.hw_debug_enabled == 0 )
- {
- puts ( "No breakpoints enabled\n" );
- return;
- }
-
- which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
- if( bug_ctx.clear )
- (*bug_ctx.clear)( which_bp );
-
- printf( "Breakpoint %d removed\n", which_bp );
- return;
- }
-
- /* Show a list of breakpoints */
-
- if( strcmp( argv[ 1 ], "show" ) == 0 )
- {
- for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
- {
-
- addr = GET_IABR();
-
- printf( "Breakpoint [%d]: ", which_bp );
- if( (addr & 0x00000002) == 0 )
- puts ( "NOT SET\n" );
- else
- disppc( (unsigned char *)(addr & 0xFFFFFFFC), 0, 1, bedbug_puts, F_RADHEX );
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if(!(( isdigit( argv[ 1 ][ 0 ] )) ||
- (( argv[ 1 ][ 0 ] >= 'a' ) && ( argv[ 1 ][ 0 ] <= 'f' )) ||
- (( argv[ 1 ][ 0 ] >= 'A' ) && ( argv[ 1 ][ 0 ] <= 'F' ))))
- {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul( argv[ 1 ], NULL, 16 );
-
- if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
- {
- printf( "Breakpoint [%d]: ", which_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
-
- return;
-} /* bedbug603e_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint. Enter a mini main loop. Stay in the loop until
- * the stopped flag in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug603e_break_isr( struct pt_regs *regs )
-{
- unsigned long addr; /* Address stopped at */
- /* -------------------------------------------------- */
-
- bug_ctx.current_bp = 1;
- addr = GET_IABR() & 0xFFFFFFFC;
-
- bedbug_main_loop( addr, regs );
- return;
-} /* bedbug603e_break_isr */
-
-
-
-/* ======================================================================
- * See if the hardware breakpoint is available.
- * ====================================================================== */
-
-int bedbug603e_find_empty( void )
-{
- /* -------------------------------------------------- */
-
- if( (GET_IABR() && 0x00000002) == 0 )
- return 1;
-
- return 0;
-} /* bedbug603e_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the IABR register.
- * ====================================================================== */
-
-int bedbug603e_set( int which_bp, unsigned long addr )
-{
- /* -------------------------------------------------- */
-
- if(( addr & 0x00000003 ) != 0 )
- {
- puts ( "Breakpoints must be on a 32 bit boundary\n" );
- return 0;
- }
-
- /* Only look if which_bp == 0, else use which_bp */
- if(( bug_ctx.find_empty ) && ( !which_bp ) &&
- ( which_bp = (*bug_ctx.find_empty)()) == 0 )
- {
- puts ( "All breakpoints in use\n" );
- return 0;
- }
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # %d\n", which_bp );
- return 0;
- }
-
- if( ! bug_ctx.hw_debug_enabled )
- {
- bug_ctx.hw_debug_enabled = 1;
- }
-
- SET_IABR( addr | 0x00000002 );
-
- return which_bp;
-} /* bedbug603e_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the IABR register to zero.
- * ====================================================================== */
-
-int bedbug603e_clear( int which_bp )
-{
- /* -------------------------------------------------- */
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # (%d)\n", which_bp );
- return -1;
- }
-
- SET_IABR( 0 );
-
- return 0;
-} /* bedbug603e_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c
deleted file mode 100644
index 94f6bc2..0000000
--- a/cpu/mpc8260/commproc.c
+++ /dev/null
@@ -1,221 +0,0 @@
-/*
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8260 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void
-m8260_cpm_reset(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile ulong count;
-
- /* Reclaim the DP memory for our use.
- */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
-
- /*
- * Reset CPM
- */
- immr->im_cpm.cp_cpcr = CPM_CR_RST;
- count = 0;
- do { /* Spin until command processed */
- __asm__ __volatile__ ("eieio");
- } while ((immr->im_cpm.cp_cpcr & CPM_CR_FLG) && ++count < 1000000);
-
-#ifdef CONFIG_HARD_I2C
- *((unsigned short*)(&immr->im_dprambase[PROFF_I2C_BASE])) = 0;
-#endif
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8260_cpm_dpalloc(uint size, uint align)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- uint retloc;
- uint align_mask, off;
- uint savebase;
-
- align_mask = align - 1;
- savebase = gd->dp_alloc_base;
-
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
-
- if ((off = size & align_mask) != 0)
- size += align - off;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
- panic("m8260_cpm_dpalloc: ran out of dual port ram!");
- }
-
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
-
- memset((void *)&immr->im_dprambase[retloc], 0, size);
-
- return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8260_cpm_hostalloc(uint size, uint align)
-{
- /* the host might not even have RAM yet - just use dual port RAM */
- return (m8260_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK (BRG_INT_CLK / 16)
-
-/* This function is used by UARTs, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8260_cpm_setbrg(uint brg, uint rate)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
- uint cd = BRG_UART_CLK / rate;
-
- if ((BRG_UART_CLK % rate) < (rate / 2))
- cd--;
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = (cd << 1) | CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8260_cpm_fastbrg(uint brg, uint rate, int div16)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8260_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&immr->im_brgc1;
- }
- else {
- bp = (uint *)&immr->im_brgc5;
- brg -= 4;
- }
- bp += brg;
- *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (pinsel == 0)
- *bp |= CPM_BRG_EXTC_CLK3_9;
- else
- *bp |= CPM_BRG_EXTC_CLK5_15;
-}
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_BOOTCOUNT_ADDR);
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc8260/config.mk b/cpu/mpc8260/config.mk
deleted file mode 100644
index 39d81ee..0000000
--- a/cpu/mpc8260/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8260 -DCONFIG_CPM2 -ffixed-r2 \
- -mstring -mcpu=603e -mmultiple
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc8260/u-boot.lds
diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c
deleted file mode 100644
index aedbf29..0000000
--- a/cpu/mpc8260/cpu.c
+++ /dev/null
@@ -1,338 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC825x / MPC826x / MPC827x / MPC828x
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * modified by
- * Wolfgang Denk <wd@denx.de>
- *
- * modified for 8260 by
- * Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * added 8260 masks by
- * Marius Groeger <mag@sysgo.de>
- *
- * added HiP7 (824x/827x/8280) processors support by
- * Yuli Barcohen <yuli@arabellasw.com>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <netdev.h>
-#include <asm/processor.h>
-#include <asm/cpm_8260.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_GET_CPU_STR_F)
-extern int get_cpu_str_f (char *buf);
-#endif
-
-int checkcpu (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong clock = gd->cpu_clk;
- uint pvr = get_pvr ();
- uint immr, rev, m, k;
- char buf[32];
-
- puts ("CPU: ");
-
- switch (pvr) {
- case PVR_8260:
- case PVR_8260_HIP3:
- k = 3;
- break;
- case PVR_8260_HIP4:
- k = 4;
- break;
- case PVR_8260_HIP7R1:
- case PVR_8260_HIP7RA:
- case PVR_8260_HIP7:
- k = 7;
- break;
- default:
- return -1; /* whoops! not an MPC8260 */
- }
- rev = pvr & 0xff;
-
- immr = immap->im_memctl.memc_immr;
- if ((immr & IMMR_ISB_MSK) != CONFIG_SYS_IMMR)
- return -1; /* whoops! someone moved the IMMR */
-
-#if defined(CONFIG_GET_CPU_STR_F)
- get_cpu_str_f (buf);
- printf ("%s (HiP%d Rev %02x, Mask ", buf, k, rev);
-#else
- printf (CPU_ID_STR " (HiP%d Rev %02x, Mask ", k, rev);
-#endif
-
- /*
- * the bottom 16 bits of the immr are the Part Number and Mask Number
- * (4-34); the 16 bits at PROFF_REVNUM (0x8af0) in dual port ram is the
- * RISC Microcode Revision Number (13-10).
- * For the 8260, Motorola doesn't include the Microcode Revision
- * in the mask.
- */
- m = immr & (IMMR_PARTNUM_MSK | IMMR_MASKNUM_MSK);
- k = *((ushort *) & immap->im_dprambase[PROFF_REVNUM]);
-
- switch (m) {
- case 0x0000:
- puts ("0.2 2J24M");
- break;
- case 0x0010:
- puts ("A.0 K22A");
- break;
- case 0x0011:
- puts ("A.1 1K22A-XC");
- break;
- case 0x0001:
- puts ("B.1 1K23A");
- break;
- case 0x0021:
- puts ("B.2 2K23A-XC");
- break;
- case 0x0023:
- puts ("B.3 3K23A");
- break;
- case 0x0024:
- puts ("C.2 6K23A");
- break;
- case 0x0060:
- puts ("A.0(A) 2K25A");
- break;
- case 0x0062:
- puts ("B.1 4K25A");
- break;
- case 0x0064:
- puts ("C.0 5K25A");
- break;
- case 0x0A00:
- puts ("0.0 0K49M");
- break;
- case 0x0A01:
- puts ("0.1 1K49M");
- break;
- case 0x0A10:
- puts ("1.0 1K49M");
- break;
- case 0x0C00:
- puts ("0.0 0K50M");
- break;
- case 0x0C10:
- puts ("1.0 1K50M");
- break;
- case 0x0D00:
- puts ("0.0 0K50M");
- break;
- case 0x0D10:
- puts ("1.0 1K50M");
- break;
- default:
- printf ("unknown [immr=0x%04x,k=0x%04x]", m, k);
- break;
- }
-
- printf (") at %s MHz\n", strmhz (buf, clock));
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-/* configures a UPM by writing into the UPM RAM array */
-/* uses bank 11 and a dummy physical address (=BRx_BA_MSK) */
-/* NOTE: the physical address chosen must not overlap into any other area */
-/* mapped by the memory controller because bank 11 has the lowest priority */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8260_t *memctl = &immap->im_memctl;
- volatile uchar *dummy = (uchar *) BRx_BA_MSK; /* set all BA bits */
- uint i;
-
- /* first set up bank 11 to reference the correct UPM at a dummy address */
-
- memctl->memc_or11 = ORxU_AM_MSK; /* set all AM bits */
-
- switch (upm) {
-
- case UPMA:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMA |
- BRx_V;
- memctl->memc_mamr = MxMR_OP_WARR;
- break;
-
- case UPMB:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMB |
- BRx_V;
- memctl->memc_mbmr = MxMR_OP_WARR;
- break;
-
- case UPMC:
- memctl->memc_br11 =
- ((uint)dummy & BRx_BA_MSK) | BRx_PS_32 | BRx_MS_UPMC |
- BRx_V;
- memctl->memc_mcmr = MxMR_OP_WARR;
- break;
-
- default:
- panic ("upmconfig passed invalid UPM number (%u)\n", upm);
- break;
-
- }
-
- /*
- * at this point, the dummy address is set up to access the selected UPM,
- * the MAD pointer is zero, and the MxMR OP is set for writing to RAM
- *
- * now we simply load the mdr with each word and poke the dummy address.
- * the MAD is incremented on each access.
- */
-
- for (i = 0; i < size; i++) {
- memctl->memc_mdr = table[i];
- *dummy = 0;
- }
-
- /* now kill bank 11 */
- memctl->memc_br11 = 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if !defined(CONFIG_HAVE_OWN_RESET)
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_rmr = RMR_CSRE; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
- * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-
-}
-#endif /* CONFIG_HAVE_OWN_RESET */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- */
-unsigned long get_tbclk (void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return (tbclk);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_8260_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-/* ------------------------------------------------------------------------- */
-#if defined(CONFIG_OF_LIBFDT) && defined (CONFIG_OF_BOARD_SETUP)
-void ft_cpu_setup (void *blob, bd_t *bd)
-{
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
- fdt_fixup_ethernet(blob);
-#endif
-
- do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
- "clock-frequency", bd->bi_brgfreq, 1);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", OF_TBCLK, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
-#endif /* CONFIG_OF_LIBFDT */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_ETHER_ON_FCC)
- fec_initialize(bis);
-#endif
-#if defined(CONFIG_ETHER_ON_SCC)
- mpc82xx_scc_enet_initialize(bis);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c
deleted file mode 100644
index 1d52773..0000000
--- a/cpu/mpc8260/cpu_init.c
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-#include <ioports.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-extern unsigned long board_get_cpu_clk_f (void);
-#endif
-
-static void config_8260_ioports (volatile immap_t * immr)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (immr, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-
-#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask))
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
- uint sccr;
-#endif
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- unsigned long cpu_clk;
-#endif
- volatile memctl8260_t *memctl = &immr->im_memctl;
- extern void m8260_cpm_reset (void);
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* RSR - Reset Status Register - clear all status (5-4) */
- gd->reset_status = immr->im_clkrst.car_rsr;
- immr->im_clkrst.car_rsr = RSR_ALLBITS;
-
- /* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
- immr->im_clkrst.car_rmr = CONFIG_SYS_RMR;
-
- /* BCR - Bus Configuration Register (4-25) */
-#if defined(CONFIG_SYS_BCR_60x) && (CONFIG_SYS_BCR_SINGLE)
- if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_60x, 0x80000010);
- } else {
- immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CONFIG_SYS_BCR_SINGLE, 0x80000010);
- }
-#else
- immr->im_siu_conf.sc_bcr = CONFIG_SYS_BCR;
-#endif
-
- /* SIUMCR - contains debug pin configuration (4-31) */
-#if defined(CONFIG_SYS_SIUMCR_LOW) && (CONFIG_SYS_SIUMCR_HIGH)
- cpu_clk = board_get_cpu_clk_f ();
- if (cpu_clk >= 100000000) {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_HIGH, 0x9f3cc000);
- } else {
- immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CONFIG_SYS_SIUMCR_LOW, 0x9f3cc000);
- }
-#else
- immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
-
- config_8260_ioports (immr);
-
- /* initialize time counter status and control register (4-40) */
- immr->im_sit.sit_tmcntsc = CONFIG_SYS_TMCNTSC;
-
- /* initialize the PIT (4-42) */
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
-#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
- /* System clock control register (9-8) */
- sccr = immr->im_clkrst.car_sccr &
- (SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
- immr->im_clkrst.car_sccr = sccr |
- (CONFIG_SYS_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
-#endif /* !CONFIG_COGENT */
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* the PS came from the HRCW, don´t change it */
- memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CONFIG_SYS_BR0_PRELIM, BRx_PS_MSK);
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR8_PRELIM) && defined(CONFIG_SYS_OR8_PRELIM)
- memctl->memc_or8 = CONFIG_SYS_OR8_PRELIM;
- memctl->memc_br8 = CONFIG_SYS_BR8_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR9_PRELIM) && defined(CONFIG_SYS_OR9_PRELIM)
- memctl->memc_or9 = CONFIG_SYS_OR9_PRELIM;
- memctl->memc_br9 = CONFIG_SYS_BR9_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR10_PRELIM) && defined(CONFIG_SYS_OR10_PRELIM)
- memctl->memc_or10 = CONFIG_SYS_OR10_PRELIM;
- memctl->memc_br10 = CONFIG_SYS_BR10_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR11_PRELIM) && defined(CONFIG_SYS_OR11_PRELIM)
- memctl->memc_or11 = CONFIG_SYS_OR11_PRELIM;
- memctl->memc_br11 = CONFIG_SYS_BR11_PRELIM;
-#endif
-
- m8260_cpm_reset ();
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
- volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
-
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-
- return (0);
-}
-
-/*
- * print out the reason for the reset
- */
-int prt_8260_rsr (void)
-{
- static struct {
- ulong mask;
- char *desc;
- } bits[] = {
- {
- RSR_JTRS, "JTAG"}, {
- RSR_CSRS, "Check Stop"}, {
- RSR_SWRS, "Software Watchdog"}, {
- RSR_BMRS, "Bus Monitor"}, {
- RSR_ESRS, "External Soft"}, {
- RSR_EHRS, "External Hard"}
- };
- static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
- int i;
- char *sep;
-
- puts (CPU_ID_STR " Reset Status:");
-
- sep = " ";
- for (i = 0; i < n; i++)
- if (rsr & bits[i].mask) {
- printf ("%s%s", sep, bits[i].desc);
- sep = ", ";
- }
-
- puts ("\n\n");
- return (0);
-}
diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c
deleted file mode 100644
index 5ac02a0..0000000
--- a/cpu/mpc8260/ether_fcc.c
+++ /dev/null
@@ -1,1190 +0,0 @@
-/*
- * MPC8260 FCC Fast Ethernet
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8260 FCC Fast Ethernet
- * Basic ET HW initialization and packet RX/TX routines
- *
- * This code will not perform the IO port configuration. This should be
- * done in the iop_conf_t structure specific for the board.
- *
- * TODO:
- * add a PHY driver to do the negotiation
- * reflect negotiation results in FPSMR
- * look for ways to configure the board specific stuff elsewhere, eg.
- * config_xxx.h or the board directory
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/cpm_8260.h>
-#include <mpc8260.h>
-#include <command.h>
-#include <config.h>
-#include <net.h>
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
- defined(CONFIG_NET_MULTI)
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int proff_enet;
- ulong cpm_cr_enet_sblock;
- ulong cpm_cr_enet_page;
- ulong cmxfcr_mask;
- ulong cmxfcr_value;
-}
- ether_fcc_info[] =
-{
-#ifdef CONFIG_ETHER_ON_FCC1
-{
- 0,
- PROFF_FCC1,
- CPM_CR_FCC1_SBLOCK,
- CPM_CR_FCC1_PAGE,
- CONFIG_SYS_CMXFCR_MASK1,
- CONFIG_SYS_CMXFCR_VALUE1
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC2
-{
- 1,
- PROFF_FCC2,
- CPM_CR_FCC2_SBLOCK,
- CPM_CR_FCC2_PAGE,
- CONFIG_SYS_CMXFCR_MASK2,
- CONFIG_SYS_CMXFCR_VALUE2
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC3
-{
- 2,
- PROFF_FCC3,
- CPM_CR_FCC3_SBLOCK,
- CPM_CR_FCC3_PAGE,
- CONFIG_SYS_CMXFCR_MASK3,
- CONFIG_SYS_CMXFCR_VALUE3
-},
-#endif
-};
-
-/*---------------------------------------------------------------------*/
-
-/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
-#define PKT_MAXDMA_SIZE 1520
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets. */
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-
-/* Maximum input buffer size. Must be a multiple of 32. */
-#define PKT_MAXBLR_SIZE 1536
-
-#define TOUT_LOOP 1000000
-
-#define TX_BUF_CNT 2
-#ifdef __GNUC__
-static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8)));
-#else
-#error "txbuf must be 64-bit aligned"
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FCC Ethernet Tx and Rx buffer descriptors.
- * Provide for Double Buffering
- * Note: PKTBUFSRX is defined in net.h
- */
-
-typedef volatile struct rtxbd {
- cbd_t rxbd[PKTBUFSRX];
- cbd_t txbd[TX_BUF_CNT];
-} RTXBD;
-
-/* Good news: the FCC supports external BDs! */
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
-
- if (length <= 0) {
- printf("fec: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- puts ("fec: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx.txbd[txIdx].cbd_datlen = length;
- rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
- BD_ENET_TX_WRAP);
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- puts ("fec: tx error\n");
- goto out;
- }
- }
-
-#ifdef ET_DEBUG
- printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc);
-#endif
-
- /* return only status bits */
- result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
-
-out:
- return result;
-}
-
-static int fec_recv(struct eth_device* dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
- length = rtx.rxbd[rxIdx].cbd_datlen;
-
- if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
- printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
- }
- else {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the FCC. */
- rtx.rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-
-static int fec_init(struct eth_device* dev, bd_t *bis)
-{
- struct ether_fcc_info_s * info = dev->priv;
- int i;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8260_t *cp = &(immr->im_cpm);
- fcc_enet_t *pram_ptr;
- unsigned long mem_addr;
-
-#if 0
- mii_discover_phy();
-#endif
-
- /* 28.9 - (1-2): ioports have been set up already */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~info->cmxfcr_mask) |
- info->cmxfcr_value;
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
- immr->im_fcc[info->ether_index].fcc_gfmr =
- FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
-
- /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */
- immr->im_fcc[info->ether_index].fcc_fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- immr->im_fcc[info->ether_index].fcc_fdsr = 0xD555;
-
- /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
- rxIdx = 0;
- txIdx = 0;
-
- /* Setup Receiver Buffer Descriptors */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx.rxbd[i].cbd_datlen = 0;
- rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* Setup Ethernet Transmitter Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
- rtx.txbd[i].cbd_datlen = 0;
- rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
- }
- rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 28.9 - (7): initialise parameter ram */
- pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[info->proff_enet]);
-
- /* clear whole structure to make sure all reserved fields are zero */
- memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- */
- mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
- pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
- pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- */
- pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
- pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
- pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
-
- /* protocol-specific area */
- pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
- pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
- pram_ptr->fen_retlim = 15; /* Retry limit threshold */
- pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So, far we have only been given one Ethernet address. We make
- * it unique by setting a few bits in the upper byte of the
- * non-static part of the address.
- */
-#define ea eth_get_dev()->enetaddr
- pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
- pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
- /* pad pointer. use tiptr since we don't need a specific padding char */
- pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
- pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */
- pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */
- pram_ptr->fen_rfthr = 1;
- pram_ptr->fen_rfcnt = 1;
-#if 0
- printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n",
- pram_ptr->fen_genfcc.fcc_rbase);
- printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n",
- pram_ptr->fen_genfcc.fcc_tbase);
-#endif
-
- /* 28.9 - (8): clear out events in FCCE */
- immr->im_fcc[info->ether_index].fcc_fcce = ~0x0;
-
- /* 28.9 - (9): FCCM: mask all events */
- immr->im_fcc[info->ether_index].fcc_fccm = 0;
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cp_cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
- info->cpm_cr_enet_sblock,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- immr->im_fcc[info->ether_index].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
-
- return 1;
-}
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s * info = dev->priv;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
-
- /* write GFMR: disable tx/rx */
- immr->im_fcc[info->ether_index].fcc_gfmr &=
- ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
-}
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- {
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "FCC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- dev->priv = &ether_fcc_info[i];
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
- && defined(CONFIG_BITBANGMII)
- miiphy_register(dev->name,
- bb_miiphy_read, bb_miiphy_write);
-#endif
- }
-
- return 1;
-}
-
-#ifdef CONFIG_ETHER_LOOPBACK_TEST
-
-#define ELBT_BUFSZ 1024 /* must be multiple of 32 */
-
-#define ELBT_CRCSZ 4
-
-#define ELBT_NRXBD 4 /* must be at least 2 */
-#define ELBT_NTXBD 4
-
-#define ELBT_MAXRXERR 32
-#define ELBT_MAXTXERR 32
-
-#define ELBT_CLSWAIT 1000 /* msec to wait for further input frames */
-
-typedef
- struct {
- uint off;
- char *lab;
- }
-elbt_prdesc;
-
-typedef
- struct {
- uint _l, _f, m, bc, mc, lg, no, sh, cr, ov, cl;
- uint badsrc, badtyp, badlen, badbit;
- }
-elbt_rxeacc;
-
-static elbt_prdesc rxeacc_descs[] = {
- { offsetof(elbt_rxeacc, _l), "Not Last in Frame" },
- { offsetof(elbt_rxeacc, _f), "Not First in Frame" },
- { offsetof(elbt_rxeacc, m), "Address Miss" },
- { offsetof(elbt_rxeacc, bc), "Broadcast Address" },
- { offsetof(elbt_rxeacc, mc), "Multicast Address" },
- { offsetof(elbt_rxeacc, lg), "Frame Length Violation"},
- { offsetof(elbt_rxeacc, no), "Non-Octet Alignment" },
- { offsetof(elbt_rxeacc, sh), "Short Frame" },
- { offsetof(elbt_rxeacc, cr), "CRC Error" },
- { offsetof(elbt_rxeacc, ov), "Overrun" },
- { offsetof(elbt_rxeacc, cl), "Collision" },
- { offsetof(elbt_rxeacc, badsrc), "Bad Src Address" },
- { offsetof(elbt_rxeacc, badtyp), "Bad Frame Type" },
- { offsetof(elbt_rxeacc, badlen), "Bad Frame Length" },
- { offsetof(elbt_rxeacc, badbit), "Data Compare Errors" },
-};
-static int rxeacc_ndesc = sizeof (rxeacc_descs) / sizeof (rxeacc_descs[0]);
-
-typedef
- struct {
- uint def, hb, lc, rl, rc, un, csl;
- }
-elbt_txeacc;
-
-static elbt_prdesc txeacc_descs[] = {
- { offsetof(elbt_txeacc, def), "Defer Indication" },
- { offsetof(elbt_txeacc, hb), "Heartbeat" },
- { offsetof(elbt_txeacc, lc), "Late Collision" },
- { offsetof(elbt_txeacc, rl), "Retransmission Limit" },
- { offsetof(elbt_txeacc, rc), "Retry Count" },
- { offsetof(elbt_txeacc, un), "Underrun" },
- { offsetof(elbt_txeacc, csl), "Carrier Sense Lost" },
-};
-static int txeacc_ndesc = sizeof (txeacc_descs) / sizeof (txeacc_descs[0]);
-
-typedef
- struct {
- uchar rxbufs[ELBT_NRXBD][ELBT_BUFSZ];
- uchar txbufs[ELBT_NTXBD][ELBT_BUFSZ];
- cbd_t rxbd[ELBT_NRXBD];
- cbd_t txbd[ELBT_NTXBD];
- enum { Idle, Running, Closing, Closed } state;
- int proff, page, sblock;
- uint clstime, nsent, ntxerr, nrcvd, nrxerr;
- ushort rxerrs[ELBT_MAXRXERR], txerrs[ELBT_MAXTXERR];
- elbt_rxeacc rxeacc;
- elbt_txeacc txeacc;
- } __attribute__ ((aligned(8)))
-elbt_chan;
-
-static uchar patbytes[ELBT_NTXBD] = {
- 0xff, 0xaa, 0x55, 0x00
-};
-static uint patwords[ELBT_NTXBD] = {
- 0xffffffff, 0xaaaaaaaa, 0x55555555, 0x00000000
-};
-
-#ifdef __GNUC__
-static elbt_chan elbt_chans[3] __attribute__ ((aligned(8)));
-#else
-#error "elbt_chans must be 64-bit aligned"
-#endif
-
-#define CPM_CR_GRACEFUL_STOP_TX ((ushort)0x0005)
-
-static elbt_prdesc epram_descs[] = {
- { offsetof(fcc_enet_t, fen_crcec), "CRC Errors" },
- { offsetof(fcc_enet_t, fen_alec), "Alignment Errors" },
- { offsetof(fcc_enet_t, fen_disfc), "Discarded Frames" },
- { offsetof(fcc_enet_t, fen_octc), "Octets" },
- { offsetof(fcc_enet_t, fen_colc), "Collisions" },
- { offsetof(fcc_enet_t, fen_broc), "Broadcast Frames" },
- { offsetof(fcc_enet_t, fen_mulc), "Multicast Frames" },
- { offsetof(fcc_enet_t, fen_uspc), "Undersize Frames" },
- { offsetof(fcc_enet_t, fen_frgc), "Fragments" },
- { offsetof(fcc_enet_t, fen_ospc), "Oversize Frames" },
- { offsetof(fcc_enet_t, fen_jbrc), "Jabbers" },
- { offsetof(fcc_enet_t, fen_p64c), "64 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p65c), "65-127 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p128c), "128-255 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p256c), "256-511 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p512c), "512-1023 Octet Frames" },
- { offsetof(fcc_enet_t, fen_p1024c), "1024-1518 Octet Frames"},
-};
-static int epram_ndesc = sizeof (epram_descs) / sizeof (epram_descs[0]);
-
-/*
- * given an elbt_prdesc array and an array of base addresses, print
- * each prdesc down the screen with the values fetched from each
- * base address across the screen
- */
-static void
-print_desc (elbt_prdesc descs[], int ndesc, uchar *bases[], int nbase)
-{
- elbt_prdesc *dp = descs, *edp = dp + ndesc;
- int i;
-
- printf ("%32s", "");
-
- for (i = 0; i < nbase; i++)
- printf (" Channel %d", i);
-
- putc ('\n');
-
- while (dp < edp) {
-
- printf ("%-32s", dp->lab);
-
- for (i = 0; i < nbase; i++) {
- uint val = *(uint *)(bases[i] + dp->off);
-
- printf (" %10u", val);
- }
-
- putc ('\n');
-
- dp++;
- }
-}
-
-/*
- * return number of bits that are set in a value; value contains
- * nbits (right-justified) bits.
- */
-static uint __inline__
-nbs (uint value, uint nbits)
-{
- uint cnt = 0;
-#if 1
- uint pos = sizeof (uint) * 8;
-
- __asm__ __volatile__ ("\
- mtctr %2\n\
-1: rlwnm. %2,%1,%4,31,31\n\
- beq 2f\n\
- addi %0,%0,1\n\
-2: subi %4,%4,1\n\
- bdnz 1b"
- : "=r"(cnt)
- : "r"(value), "r"(nbits), "r"(cnt), "r"(pos)
- : "ctr", "cc" );
-#else
- uint mask = 1;
-
- do {
- if (value & mask)
- cnt++;
- mask <<= 1;
- } while (--nbits);
-#endif
-
- return (cnt);
-}
-
-static ulong
-badbits (uchar *bp, int n, ulong pat)
-{
- ulong *lp, cnt = 0;
- int nl;
-
- while (n > 0 && ((ulong)bp & (sizeof (ulong) - 1)) != 0) {
- uchar diff;
-
- diff = *bp++ ^ (uchar)pat;
-
- if (diff)
- cnt += nbs ((ulong)diff, 8);
-
- n--;
- }
-
- lp = (ulong *)bp;
- nl = n / sizeof (ulong);
- n -= nl * sizeof (ulong);
-
- while (nl > 0) {
- ulong diff;
-
- diff = *lp++ ^ pat;
-
- if (diff)
- cnt += nbs (diff, 32);
-
- nl--;
- }
-
- bp = (uchar *)lp;
-
- while (n > 0) {
- uchar diff;
-
- diff = *bp++ ^ (uchar)pat;
-
- if (diff)
- cnt += nbs ((ulong)diff, 8);
-
- n--;
- }
-
- return (cnt);
-}
-
-static inline unsigned short
-swap16 (unsigned short x)
-{
- return (((x & 0xff) << 8) | ((x & 0xff00) >> 8));
-}
-
-/* broadcast is not an error - we send them like that */
-#define BD_ENET_RX_ERRS (BD_ENET_RX_STATS & ~BD_ENET_RX_BC)
-
-void
-eth_loopback_test (void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8260_t *cp = &(immr->im_cpm);
- int c, nclosed;
- ulong runtime, nmsec;
- uchar *bases[3];
-
- puts ("FCC Ethernet External loopback test\n");
-
- eth_getenv_enetaddr("ethaddr", NetOurEther);
-
- /*
- * global initialisations for all FCC channels
- */
-
- /* 28.9 - (1-2): ioports have been set up already */
-
-#if defined(CONFIG_HYMOD)
- /*
- * Attention: this is board-specific
- * 0, FCC1
- * 1, FCC2
- * 2, FCC3
- */
-# define FCC_START_LOOP 0
-# define FCC_END_LOOP 2
-
- /*
- * Attention: this is board-specific
- * - FCC1 Rx-CLK is CLK10
- * - FCC1 Tx-CLK is CLK11
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- * - FCC3 Rx-CLK is CLK15
- * - FCC3 Tx-CLK is CLK16
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF1CS_CLK10|CMXFCR_TF1CS_CLK11|\
- CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14|\
- CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16;
-#elif defined(CONFIG_SBC8260) || defined(CONFIG_SACSng)
- /*
- * Attention: this is board-specific
- * 1, FCC2
- */
-# define FCC_START_LOOP 1
-# define FCC_END_LOOP 1
-
- /*
- * Attention: this is board-specific
- * - FCC2 Rx-CLK is CLK13
- * - FCC2 Tx-CLK is CLK14
- */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_fcr = CMXFCR_RF2CS_CLK13|CMXFCR_TF2CS_CLK14;
-#else
-#error "eth_loopback_test not supported on your board"
-#endif
-
- puts ("Initialise FCC channels:");
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- elbt_chan *ecp = &elbt_chans[c];
- volatile fcc_t *fcp = &immr->im_fcc[c];
- volatile fcc_enet_t *fpp;
- int i;
- ulong addr;
-
- /*
- * initialise channel data
- */
-
- printf (" %d", c);
-
- memset ((void *)ecp, 0, sizeof (*ecp));
-
- ecp->state = Idle;
-
- switch (c) {
-
- case 0: /* FCC1 */
- ecp->proff = PROFF_FCC1;
- ecp->page = CPM_CR_FCC1_PAGE;
- ecp->sblock = CPM_CR_FCC1_SBLOCK;
- break;
-
- case 1: /* FCC2 */
- ecp->proff = PROFF_FCC2;
- ecp->page = CPM_CR_FCC2_PAGE;
- ecp->sblock = CPM_CR_FCC2_SBLOCK;
- break;
-
- case 2: /* FCC3 */
- ecp->proff = PROFF_FCC3;
- ecp->page = CPM_CR_FCC3_PAGE;
- ecp->sblock = CPM_CR_FCC3_SBLOCK;
- break;
- }
-
- /*
- * set up tx buffers and bds
- */
-
- for (i = 0; i < ELBT_NTXBD; i++) {
- cbd_t *bdp = &ecp->txbd[i];
- uchar *bp = &ecp->txbufs[i][0];
-
- bdp->cbd_bufaddr = (uint)bp;
- /* room for crc */
- bdp->cbd_datlen = ELBT_BUFSZ - ELBT_CRCSZ;
- bdp->cbd_sc = BD_ENET_TX_READY | BD_ENET_TX_PAD | \
- BD_ENET_TX_LAST | BD_ENET_TX_TC;
-
- memset ((void *)bp, patbytes[i], ELBT_BUFSZ);
- NetSetEther (bp, NetBcastAddr, 0x8000);
- }
- ecp->txbd[ELBT_NTXBD - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /*
- * set up rx buffers and bds
- */
-
- for (i = 0; i < ELBT_NRXBD; i++) {
- cbd_t *bdp = &ecp->rxbd[i];
- uchar *bp = &ecp->rxbufs[i][0];
-
- bdp->cbd_bufaddr = (uint)bp;
- bdp->cbd_datlen = 0;
- bdp->cbd_sc = BD_ENET_RX_EMPTY;
-
- memset ((void *)bp, 0, ELBT_BUFSZ);
- }
- ecp->rxbd[ELBT_NRXBD - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * set up the FCC channel hardware
- */
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */
- fcp->fcc_gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
-
- /* 28.9 - (5): FPSMR: fd, enet CRC, Promis, RMON, Rx SHort */
- fcp->fcc_fpsmr = FCC_PSMR_FDE | FCC_PSMR_LPB | \
- FCC_PSMR_ENCRC | FCC_PSMR_PRO | \
- FCC_PSMR_MON | FCC_PSMR_RSH;
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- fcp->fcc_fdsr = 0xD555;
-
- /* 29.9 - (7): initialise parameter ram */
- fpp = (fcc_enet_t *)&(immr->im_dprambase[ecp->proff]);
-
- /* clear whole struct to make sure all resv fields are zero */
- memset ((void *)fpp, 0, sizeof (fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- */
- addr = CPM_FCC_SPECIAL_BASE + (c * 64);
- fpp->fen_genfcc.fcc_riptr = addr;
- fpp->fen_genfcc.fcc_tiptr = addr + 32;
-
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- * buffers are in 60x bus memory.
- */
- fpp->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE;
- fpp->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
- fpp->fen_genfcc.fcc_rbase = (unsigned int)(&ecp->rxbd[0]);
- fpp->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB) << 24;
- fpp->fen_genfcc.fcc_tbase = (unsigned int)(&ecp->txbd[0]);
-
- /* protocol-specific area */
- fpp->fen_cmask = 0xdebb20e3; /* CRC mask */
- fpp->fen_cpres = 0xffffffff; /* CRC preset */
- fpp->fen_retlim = 15; /* Retry limit threshold */
- fpp->fen_mflr = PKT_MAXBUF_SIZE;/* max frame length register */
-
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So, far we have only been given one Ethernet address. We use
- * the same address for all channels
- */
-#define ea NetOurEther
- fpp->fen_paddrh = (ea[5] << 8) + ea[4];
- fpp->fen_paddrm = (ea[3] << 8) + ea[2];
- fpp->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
- fpp->fen_minflr = PKT_MINBUF_SIZE; /* min frame len register */
- /*
- * pad pointer. use tiptr since we don't need
- * a specific padding char
- */
- fpp->fen_padptr = fpp->fen_genfcc.fcc_tiptr;
- fpp->fen_maxd1 = PKT_MAXDMA_SIZE; /* max DMA1 length */
- fpp->fen_maxd2 = PKT_MAXDMA_SIZE; /* max DMA2 length */
- fpp->fen_rfthr = 1;
- fpp->fen_rfcnt = 1;
-
- /* 28.9 - (8): clear out events in FCCE */
- fcp->fcc_fcce = ~0x0;
-
- /* 28.9 - (9): FCCM: mask all events */
- fcp->fcc_fccm = 0;
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cp_cpcr = mk_cr_cmd (ecp->page, ecp->sblock, \
- 0x0c, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
- }
-
- puts (" done\nStarting test... (Ctrl-C to Finish)\n");
-
- /*
- * Note: don't want serial output from here until the end of the
- * test - the delays would probably stuff things up.
- */
-
- clear_ctrlc ();
- runtime = get_timer (0);
-
- do {
- nclosed = 0;
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- volatile fcc_t *fcp = &immr->im_fcc[c];
- elbt_chan *ecp = &elbt_chans[c];
- int i;
-
- switch (ecp->state) {
-
- case Idle:
- /*
- * set the channel Running ...
- */
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- fcp->fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
-
- ecp->state = Running;
- break;
-
- case Running:
- /*
- * (while Running only) check for
- * termination of the test
- */
-
- (void)ctrlc ();
-
- if (had_ctrlc ()) {
- /*
- * initiate a "graceful stop transmit"
- * on the channel
- */
- cp->cp_cpcr = mk_cr_cmd (ecp->page, \
- ecp->sblock, 0x0c, \
- CPM_CR_GRACEFUL_STOP_TX) | \
- CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- ecp->clstime = get_timer (0);
- ecp->state = Closing;
- }
- /* fall through ... */
-
- case Closing:
- /*
- * (while Running or Closing) poll the channel:
- * - check for any non-READY tx buffers and
- * make them ready
- * - check for any non-EMPTY rx buffers and
- * check that they were received correctly,
- * adjust counters etc, then make empty
- */
-
- for (i = 0; i < ELBT_NTXBD; i++) {
- cbd_t *bdp = &ecp->txbd[i];
- ushort sc = bdp->cbd_sc;
-
- if ((sc & BD_ENET_TX_READY) != 0)
- continue;
-
- /*
- * this frame has finished
- * transmitting
- */
- ecp->nsent++;
-
- if (sc & BD_ENET_TX_STATS) {
- ulong n;
-
- /*
- * we had an error on
- * the transmission
- */
- n = ecp->ntxerr++;
- if (n < ELBT_MAXTXERR)
- ecp->txerrs[n] = sc;
-
- if (sc & BD_ENET_TX_DEF)
- ecp->txeacc.def++;
- if (sc & BD_ENET_TX_HB)
- ecp->txeacc.hb++;
- if (sc & BD_ENET_TX_LC)
- ecp->txeacc.lc++;
- if (sc & BD_ENET_TX_RL)
- ecp->txeacc.rl++;
- if (sc & BD_ENET_TX_RCMASK)
- ecp->txeacc.rc++;
- if (sc & BD_ENET_TX_UN)
- ecp->txeacc.un++;
- if (sc & BD_ENET_TX_CSL)
- ecp->txeacc.csl++;
-
- bdp->cbd_sc &= \
- ~BD_ENET_TX_STATS;
- }
-
- if (ecp->state == Closing)
- ecp->clstime = get_timer (0);
-
- /* make it ready again */
- bdp->cbd_sc |= BD_ENET_TX_READY;
- }
-
- for (i = 0; i < ELBT_NRXBD; i++) {
- cbd_t *bdp = &ecp->rxbd[i];
- ushort sc = bdp->cbd_sc, mask;
-
- if ((sc & BD_ENET_RX_EMPTY) != 0)
- continue;
-
- /* we have a new frame in this buffer */
- ecp->nrcvd++;
-
- mask = BD_ENET_RX_LAST|BD_ENET_RX_FIRST;
- if ((sc & mask) != mask) {
- /* somethings wrong here ... */
- if (!(sc & BD_ENET_RX_LAST))
- ecp->rxeacc._l++;
- if (!(sc & BD_ENET_RX_FIRST))
- ecp->rxeacc._f++;
- }
-
- if (sc & BD_ENET_RX_ERRS) {
- ulong n;
-
- /*
- * we had some sort of error
- * on the frame
- */
- n = ecp->nrxerr++;
- if (n < ELBT_MAXRXERR)
- ecp->rxerrs[n] = sc;
-
- if (sc & BD_ENET_RX_MISS)
- ecp->rxeacc.m++;
- if (sc & BD_ENET_RX_BC)
- ecp->rxeacc.bc++;
- if (sc & BD_ENET_RX_MC)
- ecp->rxeacc.mc++;
- if (sc & BD_ENET_RX_LG)
- ecp->rxeacc.lg++;
- if (sc & BD_ENET_RX_NO)
- ecp->rxeacc.no++;
- if (sc & BD_ENET_RX_SH)
- ecp->rxeacc.sh++;
- if (sc & BD_ENET_RX_CR)
- ecp->rxeacc.cr++;
- if (sc & BD_ENET_RX_OV)
- ecp->rxeacc.ov++;
- if (sc & BD_ENET_RX_CL)
- ecp->rxeacc.cl++;
-
- bdp->cbd_sc &= \
- ~BD_ENET_RX_ERRS;
- }
- else {
- ushort datlen = bdp->cbd_datlen;
- Ethernet_t *ehp;
- ushort prot;
- int ours, tb, n, nbytes;
-
- ehp = (Ethernet_t *) \
- &ecp->rxbufs[i][0];
-
- ours = memcmp (ehp->et_src, \
- NetOurEther, 6);
-
- prot = swap16 (ehp->et_protlen);
- tb = prot & 0x8000;
- n = prot & 0x7fff;
-
- nbytes = ELBT_BUFSZ - \
- offsetof (Ethernet_t, \
- et_dsap) - \
- ELBT_CRCSZ;
-
- /* check the frame is correct */
- if (datlen != ELBT_BUFSZ)
- ecp->rxeacc.badlen++;
- else if (!ours)
- ecp->rxeacc.badsrc++;
- else if (!tb || n >= ELBT_NTXBD)
- ecp->rxeacc.badtyp++;
- else {
- ulong patword = \
- patwords[n];
- uint nbb;
-
- nbb = badbits ( \
- &ehp->et_dsap, \
- nbytes, \
- patword);
-
- ecp->rxeacc.badbit += \
- nbb;
- }
- }
-
- if (ecp->state == Closing)
- ecp->clstime = get_timer (0);
-
- /* make it empty again */
- bdp->cbd_sc |= BD_ENET_RX_EMPTY;
- }
-
- if (ecp->state != Closing)
- break;
-
- /*
- * (while Closing) check to see if
- * waited long enough
- */
-
- if (get_timer (ecp->clstime) >= ELBT_CLSWAIT) {
- /* write GFMR: disable tx/rx */
- fcp->fcc_gfmr &= \
- ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- ecp->state = Closed;
- }
-
- break;
-
- case Closed:
- nclosed++;
- break;
- }
- }
-
- } while (nclosed < (FCC_END_LOOP - FCC_START_LOOP + 1));
-
- runtime = get_timer (runtime);
- if (runtime <= ELBT_CLSWAIT) {
- printf ("Whoops! somehow elapsed time (%ld) is wrong (<= %d)\n",
- runtime, ELBT_CLSWAIT);
- return;
- }
- nmsec = runtime - ELBT_CLSWAIT;
-
- printf ("Test Finished in %ldms (plus %dms close wait period)!\n\n",
- nmsec, ELBT_CLSWAIT);
-
- /*
- * now print stats
- */
-
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++) {
- elbt_chan *ecp = &elbt_chans[c];
- uint rxpps, txpps, nerr;
-
- rxpps = (ecp->nrcvd * 1000) / nmsec;
- txpps = (ecp->nsent * 1000) / nmsec;
-
- printf ("Channel %d: %d rcvd (%d pps, %d rxerrs), "
- "%d sent (%d pps, %d txerrs)\n\n", c,
- ecp->nrcvd, rxpps, ecp->nrxerr,
- ecp->nsent, txpps, ecp->ntxerr);
-
- if ((nerr = ecp->nrxerr) > 0) {
- ulong i;
-
- printf ("\tFirst %d rx errs:", nerr);
- for (i = 0; i < nerr; i++)
- printf (" %04x", ecp->rxerrs[i]);
- putc ('\n');
- }
-
- if ((nerr = ecp->ntxerr) > 0) {
- ulong i;
-
- printf ("\tFirst %d tx errs:", nerr);
- for (i = 0; i < nerr; i++)
- printf (" %04x", ecp->txerrs[i]);
- putc ('\n');
- }
- }
-
- puts ("Receive Error Counts:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&elbt_chans[c].rxeacc;
- print_desc (rxeacc_descs, rxeacc_ndesc, bases, 3);
-
- puts ("\nTransmit Error Counts:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&elbt_chans[c].txeacc;
- print_desc (txeacc_descs, txeacc_ndesc, bases, 3);
-
- puts ("\nRMON(-like) Counters:\n");
- for (c = FCC_START_LOOP; c <= FCC_END_LOOP; c++)
- bases[c] = (uchar *)&immr->im_dprambase[elbt_chans[c].proff];
- print_desc (epram_descs, epram_ndesc, bases, 3);
-}
-
-#endif /* CONFIG_ETHER_LOOPBACK_TEST */
-
-#endif
diff --git a/cpu/mpc8260/ether_scc.c b/cpu/mpc8260/ether_scc.c
deleted file mode 100644
index 432111d..0000000
--- a/cpu/mpc8260/ether_scc.c
+++ /dev/null
@@ -1,387 +0,0 @@
-/*
- * MPC8260 SCC Ethernet
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright (c) 2001
- * Advent Networks, Inc. <http://www.adventnetworks.com>
- * Jay Monkman <jtm@smoothsmoothie.com>
- *
- * Modified so that it plays nicely when more than one ETHERNET interface
- * is in use a la ether_fcc.c.
- * (C) Copyright 2008
- * DENX Software Engineerin GmbH
- * Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/cpm_8260.h>
-#include <mpc8260.h>
-#include <malloc.h>
-#include <net.h>
-#include <command.h>
-#include <config.h>
-
-#ifndef CONFIG_NET_MULTI
-#error "CONFIG_NET_MULTI must be defined."
-#endif
-
-#if (CONFIG_ETHER_INDEX == 1)
-# define PROFF_ENET PROFF_SCC1
-# define CPM_CR_ENET_PAGE CPM_CR_SCC1_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC1_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC1 |\
- CMXSCR_RS1CS_MSK |\
- CMXSCR_TS1CS_MSK)
-
-#elif (CONFIG_ETHER_INDEX == 2)
-# define PROFF_ENET PROFF_SCC2
-# define CPM_CR_ENET_PAGE CPM_CR_SCC2_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC2_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC2 |\
- CMXSCR_RS2CS_MSK |\
- CMXSCR_TS2CS_MSK)
-
-#elif (CONFIG_ETHER_INDEX == 3)
-# define PROFF_ENET PROFF_SCC3
-# define CPM_CR_ENET_PAGE CPM_CR_SCC3_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC3_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC3 |\
- CMXSCR_RS3CS_MSK |\
- CMXSCR_TS3CS_MSK)
-#elif (CONFIG_ETHER_INDEX == 4)
-# define PROFF_ENET PROFF_SCC4
-# define CPM_CR_ENET_PAGE CPM_CR_SCC4_PAGE
-# define CPM_CR_ENET_SBLOCK CPM_CR_SCC4_SBLOCK
-# define CMXSCR_MASK (CMXSCR_SC4 |\
- CMXSCR_RS4CS_MSK |\
- CMXSCR_TS4CS_MSK)
-
-#endif
-
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#if !defined(CONFIG_SYS_SCC_TOUT_LOOP)
- #define CONFIG_SYS_SCC_TOUT_LOOP 1000000
-#endif
-
-static char txbuf[TX_BUF_CNT][ DBUF_LENGTH ];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * SCC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-
-static int sec_send(struct eth_device *dev, volatile void *packet, int length)
-{
- int i;
- int result = 0;
-
- if (length <= 0) {
- printf("scc: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
- puts ("scc: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |
- BD_ENET_TX_WRAP);
-
- for(i=0; rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= CONFIG_SYS_SCC_TOUT_LOOP) {
- puts ("scc: tx error\n");
- goto out;
- }
- }
-
- /* return only status bits */
- result = rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
-
- out:
- return result;
-}
-
-
-static int sec_rx(struct eth_device *dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f)
- {
- printf("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
- }
- else
- {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP |
- BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-/**************************************************************
- *
- * SCC Ethernet Initialization Routine
- *
- *************************************************************/
-
-static int sec_init(struct eth_device *dev, bd_t *bis)
-{
- int i;
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- scc_enet_t *pram_ptr;
- uint dpaddr;
- uchar ea[6];
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Assign static pointer to BD area.
- * Avoid exhausting DPRAM, which would cause a panic.
- */
- if (rtx == NULL) {
- dpaddr = m8260_cpm_dpalloc(sizeof(RTXBD) + 2, 16);
- rtx = (RTXBD *)&immr->im_dprambase[dpaddr];
- }
-
- /* 24.21 - (1-3): ioports have been set up already */
-
- /* 24.21 - (4,5): connect SCC's tx and rx clocks, use NMSI for SCC */
- immr->im_cpmux.cmx_uar = 0;
- immr->im_cpmux.cmx_scr = ( (immr->im_cpmux.cmx_scr & ~CMXSCR_MASK) |
- CONFIG_SYS_CMXSCR_VALUE);
-
-
- /* 24.21 (6) write RBASE and TBASE to parameter RAM */
- pram_ptr = (scc_enet_t *)&(immr->im_dprambase[PROFF_ENET]);
- pram_ptr->sen_genscc.scc_rbase = (unsigned int)(&rtx->rxbd[0]);
- pram_ptr->sen_genscc.scc_tbase = (unsigned int)(&rtx->txbd[0]);
-
- pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Nrml Ops and Mot byte ordering */
- pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Nrml access */
-
- pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. package len 1520 */
-
- pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
- pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
-
-
- /* 24.21 - (7): Write INIT RX AND TX PARAMETERS to CPCR */
- while(immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- immr->im_cpm.cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE,
- CPM_CR_ENET_SBLOCK,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- /* 24.21 - (8-18): Set up parameter RAM */
- pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
- pram_ptr->sen_alec = 0x0; /* Align Error Counter (unused) */
- pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
-
- pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
-
- pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
-
- pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
- pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
-
- pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
- pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
-
- pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
- pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
- pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
- pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
-
- eth_getenv_enetaddr("ethaddr", ea);
- pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-
- pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
-
- pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
- pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
- pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
- pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
-
- pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
- pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
- pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
-
- /* 24.21 - (19): Initialize RxBD */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
-
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* 24.21 - (20): Initialize TxBD */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx->txbd[i].cbd_sc = (BD_ENET_TX_PAD |
- BD_ENET_TX_LAST |
- BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint)&txbuf[i][0];
- }
-
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 24.21 - (21): Write 0xffff to SCCE */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_scce = ~(0x0);
-
- /* 24.21 - (22): Write to SCCM to enable TXE, RXF, TXB events */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_sccm = (SCCE_ENET_TXE |
- SCCE_ENET_RXF |
- SCCE_ENET_TXB);
-
- /* 24.21 - (23): we don't use ethernet interrupts */
-
- /* 24.21 - (24): Clear GSMR_H to enable normal operations */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrh = 0;
-
- /* 24.21 - (25): Clear GSMR_L to enable normal operations */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
-
- /* 24.21 - (26): Initialize DSR */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_dsr = 0xd555;
-
- /* 24.21 - (27): Initialize PSMR2
- *
- * Settings:
- * CRC = 32-Bit CCITT
- * NIB = Begin searching for SFD 22 bits after RENA
- * FDE = Full Duplex Enable
- * BRO = Reject broadcast packets
- * PROMISCOUS = Catch all packets regardless of dest. MAC adress
- */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_psmr = SCC_PSMR_ENCRC |
- SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
- SCC_PSMR_FDE |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
- SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
- SCC_PSMR_PRO |
-#endif
- 0;
-
- /* 24.21 - (28): Write to GSMR_L to enable SCC */
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-
- return 0;
-}
-
-
-static void sec_halt(struct eth_device *dev)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- immr->im_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl &= ~(SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-}
-
-#if 0
-static void sec_restart(void)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- immr->im_cpm.cp_scc[CONFIG_ETHER_INDEX-1].scc_gsmrl |= (SCC_GSMRL_ENR |
- SCC_GSMRL_ENT);
-}
-#endif
-
-int mpc82xx_scc_enet_initialize(bd_t *bis)
-{
- struct eth_device *dev;
-
- dev = (struct eth_device *) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "SCC ETHERNET");
- dev->init = sec_init;
- dev->halt = sec_halt;
- dev->send = sec_send;
- dev->recv = sec_rx;
-
- eth_register(dev);
-
- return 1;
-}
diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c
deleted file mode 100644
index d2bdcc2..0000000
--- a/cpu/mpc8260/i2c.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_HARD_I2C)
-
-#include <asm/cpm_8260.h>
-#include <i2c.h>
-
-/* define to enable debug messages */
-#undef DEBUG_I2C
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_I2C_MULTI_BUS)
-static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = 0;
-#endif /* CONFIG_I2C_MULTI_BUS */
-
-/* uSec to wait between polls of the i2c */
-#define DELAY_US 100
-/* uSec to wait for the CPM to start processing the buffer */
-#define START_DELAY_US 1000
-
-/*
- * tx/rx per-byte timeout: we delay DELAY_US uSec between polls so the
- * timeout will be (tx_length + rx_length) * DELAY_US * TOUT_LOOP
- */
-#define TOUT_LOOP 5
-
-/*-----------------------------------------------------------------------
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-typedef void (*i2c_ecb_t)(int, int, void *); /* error callback function */
-
-/* This structure keeps track of the bd and buffer space usage. */
-typedef struct i2c_state {
- int rx_idx; /* index to next free Rx BD */
- int tx_idx; /* index to next free Tx BD */
- void *rxbd; /* pointer to next free Rx BD */
- void *txbd; /* pointer to next free Tx BD */
- int tx_space; /* number of Tx bytes left */
- unsigned char *tx_buf; /* pointer to free Tx area */
- i2c_ecb_t err_cb; /* error callback function */
- void *cb_data; /* private data to be passed */
-} i2c_state_t;
-
-/* flags for i2c_send() and i2c_receive() */
-#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
-#define I2CF_START_COND 0x02 /* tx: generate start condition */
-#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
-
-/* return codes */
-#define I2CERR_NO_BUFFERS 1 /* no more BDs or buffer space */
-#define I2CERR_MSG_TOO_LONG 2 /* tried to send/receive to much data */
-#define I2CERR_TIMEOUT 3 /* timeout in i2c_doio() */
-#define I2CERR_QUEUE_EMPTY 4 /* i2c_doio called without send/receive */
-#define I2CERR_IO_ERROR 5 /* had an error during comms */
-
-/* error callback flags */
-#define I2CECB_RX_ERR 0x10 /* this is a receive error */
-#define I2CECB_RX_OV 0x02 /* receive overrun error */
-#define I2CECB_RX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
-#define I2CECB_TX_CL 0x01 /* transmit collision error */
-#define I2CECB_TX_UN 0x02 /* transmit underflow error */
-#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
-#define I2CECB_TX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
-
-#define ERROR_I2C_NONE 0
-#define ERROR_I2C_LENGTH 1
-
-#define I2C_WRITE_BIT 0x00
-#define I2C_READ_BIT 0x01
-
-#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-
-
-#define NUM_RX_BDS 4
-#define NUM_TX_BDS 4
-#define MAX_TX_SPACE 256
-
-typedef struct I2C_BD
-{
- unsigned short status;
- unsigned short length;
- unsigned char *addr;
-} I2C_BD;
-#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
-
-#define BD_I2C_TX_CL 0x0001 /* collision error */
-#define BD_I2C_TX_UN 0x0002 /* underflow error */
-#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
-#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
-
-#define BD_I2C_RX_ERR BD_SC_OV
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-/*
- * Returns the best value of I2BRG to meet desired clock speed of I2C with
- * input parameters (clock speed, filter, and predivider value).
- * It returns computer speed value and the difference between it and desired
- * speed.
- */
-static inline int
-i2c_roundrate(int hz, int speed, int filter, int modval,
- int *brgval, int *totspeed)
-{
- int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
-
- PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
- hz, speed, filter, modval));
-
- div = moddiv * speed;
- brgdiv = (hz + div - 1) / div;
-
- PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
-
- *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
-
- if ((*brgval < 0) || (*brgval > 255)) {
- PRINTD(("\t\trejected brgval=%d\n", *brgval));
- return -1;
- }
-
- brgdiv = 2 * (*brgval + 3 + (2 * filter));
- div = moddiv * brgdiv ;
- *totspeed = hz / div;
-
- PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
-
- return 0;
-}
-
-/*
- * Sets the I2C clock predivider and divider to meet required clock speed.
- */
-static int i2c_setrate(int hz, int speed)
-{
- immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- int brgval,
- modval, /* 0-3 */
- bestspeed_diff = speed,
- bestspeed_brgval=0,
- bestspeed_modval=0,
- bestspeed_filter=0,
- totspeed,
- filter = 0; /* Use this fixed value */
-
- for (modval = 0; modval < 4; modval++)
- {
- if (i2c_roundrate (hz, speed, filter, modval, &brgval, &totspeed) == 0)
- {
- int diff = speed - totspeed ;
-
- if ((diff >= 0) && (diff < bestspeed_diff))
- {
- bestspeed_diff = diff ;
- bestspeed_modval = modval;
- bestspeed_brgval = brgval;
- bestspeed_filter = filter;
- }
- }
- }
-
- PRINTD(("[I2C] Best is:\n"));
- PRINTD(("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
- hz, speed,
- bestspeed_filter, bestspeed_modval, bestspeed_brgval,
- bestspeed_diff));
-
- i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
- i2c->i2c_i2brg = bestspeed_brgval & 0xff;
-
- PRINTD(("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod, i2c->i2c_i2brg));
-
- return 1 ;
-}
-
-void i2c_init(int speed, int slaveadd)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- volatile iic_t *iip;
- ulong rbase, tbase;
- volatile I2C_BD *rxbd, *txbd;
- uint dpaddr;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#endif
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- if (dpaddr == 0) {
- /* need to allocate dual port ram */
- dpaddr = m8260_cpm_dpalloc(64 +
- (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
- MAX_TX_SPACE, 64);
- *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE])) = dpaddr;
- }
-
- /*
- * initialise data in dual port ram:
- *
- * dpaddr -> parameter ram (64 bytes)
- * rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
- * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
- * tx buffer (MAX_TX_SPACE bytes)
- */
-
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- memset((void*)iip, 0, sizeof(iic_t));
-
- rbase = dpaddr + 64;
- tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
-
- /* Disable interrupts */
- i2c->i2c_i2mod = 0x00;
- i2c->i2c_i2cmr = 0x00;
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2add = slaveadd;
-
- /*
- * Set the I2C BRG Clock division factor from desired i2c rate
- * and current CPU rate (we assume sccr dfbgr field is 0;
- * divide BRGCLK by 1)
- */
- PRINTD(("[I2C] Setting rate...\n"));
- i2c_setrate (gd->brg_clk, CONFIG_SYS_I2C_SPEED) ;
-
- /* Set I2C controller in master mode */
- i2c->i2c_i2com = 0x01;
-
- /* Initialize Tx/Rx parameters */
- iip->iic_rbase = rbase;
- iip->iic_tbase = tbase;
- rxbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_rbase]);
- txbd = (I2C_BD *)((unsigned char *)&immap->im_dprambase[iip->iic_tbase]);
-
- PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
- PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- /* Set big endian byte order */
- iip->iic_tfcr = 0x10;
- iip->iic_rfcr = 0x10;
-
- /* Set maximum receive size. */
- iip->iic_mrblr = I2C_RXTX_LEN;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_I2C_PAGE,
- CPM_CR_I2C_SBLOCK,
- 0x00,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-
- /* Clear events and interrupts */
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2cmr = 0x00;
-}
-
-static
-void i2c_newio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile iic_t *iip;
- uint dpaddr;
-
- PRINTD(("[I2C] i2c_newio\n"));
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- state->rx_idx = 0;
- state->tx_idx = 0;
- state->rxbd = (void*)&immap->im_dprambase[iip->iic_rbase];
- state->txbd = (void*)&immap->im_dprambase[iip->iic_tbase];
- state->tx_space = MAX_TX_SPACE;
- state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
- state->err_cb = NULL;
- state->cb_data = NULL;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
- PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
-
- /* clear the buffer memory */
- memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
-}
-
-static
-int i2c_send(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size,
- unsigned char *dataout)
-{
- volatile I2C_BD *txbd;
- int i,j;
-
- PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
- address, secondary_address, flags, size));
-
- /* trying to send message larger than BD */
- if (size > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
- return I2CERR_NO_BUFFERS;
-
- txbd = (I2C_BD *)state->txbd;
- txbd->addr = state->tx_buf;
-
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- if (flags & I2CF_START_COND)
- {
- PRINTD(("[I2C] Formatting addresses...\n"));
- if (flags & I2CF_ENABLE_SECONDARY)
- {
- txbd->length = size + 2; /* Length of message plus dest addresses */
- txbd->addr[0] = address << 1;
- txbd->addr[1] = secondary_address;
- i = 2;
- }
- else
- {
- txbd->length = size + 1; /* Length of message plus dest address */
- txbd->addr[0] = address << 1; /* Write destination address to BD */
- i = 1;
- }
- }
- else
- {
- txbd->length = size; /* Length of message */
- i = 0;
- }
-
- /* set up txbd */
- txbd->status = BD_SC_READY;
- if (flags & I2CF_START_COND)
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-
- /* Copy data to send into buffer */
- PRINTD(("[I2C] copy data...\n"));
- for(j = 0; j < size; i++, j++)
- txbd->addr[i] = dataout[j];
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
-
- return 0;
-}
-
-static
-int i2c_receive(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size_to_expect,
- unsigned char *datain)
-{
- volatile I2C_BD *rxbd, *txbd;
-
- PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
-
- /* Expected to receive too much */
- if (size_to_expect > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
- || state->tx_space < 2)
- return I2CERR_NO_BUFFERS;
-
- rxbd = (I2C_BD *)state->rxbd;
- txbd = (I2C_BD *)state->txbd;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- txbd->addr = state->tx_buf;
-
- /* set up TXBD for destination address */
- if (flags & I2CF_ENABLE_SECONDARY)
- {
- txbd->length = 2;
- txbd->addr[0] = address << 1; /* Write data */
- txbd->addr[1] = secondary_address; /* Internal address */
- txbd->status = BD_SC_READY;
- }
- else
- {
- txbd->length = 1 + size_to_expect;
- txbd->addr[0] = (address << 1) | 0x01;
- txbd->status = BD_SC_READY;
- memset(&txbd->addr[1], 0, txbd->length);
- }
-
- /* set up rxbd for reception */
- rxbd->status = BD_SC_EMPTY;
- rxbd->length = size_to_expect;
- rxbd->addr = datain;
-
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- {
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
- rxbd->status |= BD_SC_WRAP;
- }
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
- PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- rxbd->length,
- rxbd->status,
- rxbd->addr[0],
- rxbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
- state->rx_idx++;
- state->rxbd = (void*)(rxbd + 1);
-
- return 0;
-}
-
-
-static
-int i2c_doio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile iic_t *iip;
- volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c;
- volatile I2C_BD *txbd, *rxbd;
- int n, i, b, rxcnt = 0, rxtimeo = 0, txcnt = 0, txtimeo = 0, rc = 0;
- uint dpaddr;
-
- PRINTD(("[I2C] i2c_doio\n"));
-
- if (state->tx_idx <= 0 && state->rx_idx <= 0) {
- PRINTD(("[I2C] No I/O is queued\n"));
- return I2CERR_QUEUE_EMPTY;
- }
-
- dpaddr = *((unsigned short*)(&immap->im_dprambase[PROFF_I2C_BASE]));
- iip = (iic_t *)&immap->im_dprambase[dpaddr];
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
-
- /* Enable I2C */
- PRINTD(("[I2C] Enabling I2C...\n"));
- i2c->i2c_i2mod |= 0x01;
-
- /* Begin transmission */
- i2c->i2c_i2com |= 0x80;
-
- /* Loop until transmit & receive completed */
-
- if ((n = state->tx_idx) > 0) {
-
- txbd = ((I2C_BD*)state->txbd) - n;
- for (i = 0; i < n; i++) {
- txtimeo += TOUT_LOOP * txbd->length;
- txbd++;
- }
-
- txbd--; /* wait until last in list is done */
-
- PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
-
- udelay(START_DELAY_US); /* give it time to start */
- while((txbd->status & BD_SC_READY) && (++txcnt < txtimeo)) {
- udelay(DELAY_US);
- if (ctrlc())
- return (-1);
- __asm__ __volatile__ ("eieio");
- }
- }
-
- if (txcnt < txtimeo && (n = state->rx_idx) > 0) {
-
- rxbd = ((I2C_BD*)state->rxbd) - n;
- for (i = 0; i < n; i++) {
- rxtimeo += TOUT_LOOP * rxbd->length;
- rxbd++;
- }
-
- rxbd--; /* wait until last in list is done */
-
- PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
-
- udelay(START_DELAY_US); /* give it time to start */
- while((rxbd->status & BD_SC_EMPTY) && (++rxcnt < rxtimeo)) {
- udelay(DELAY_US);
- if (ctrlc())
- return (-1);
- __asm__ __volatile__ ("eieio");
- }
- }
-
- /* Turn off I2C */
- i2c->i2c_i2mod &= ~0x01;
-
- if ((n = state->tx_idx) > 0) {
- for (i = 0; i < n; i++) {
- txbd = ((I2C_BD*)state->txbd) - (n - i);
- if ((b = txbd->status & BD_I2C_TX_ERR) != 0) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_TX_ERR|b, i,
- state->cb_data);
- if (rc == 0)
- rc = I2CERR_IO_ERROR;
- }
- }
- }
-
- if ((n = state->rx_idx) > 0) {
- for (i = 0; i < n; i++) {
- rxbd = ((I2C_BD*)state->rxbd) - (n - i);
- if ((b = rxbd->status & BD_I2C_RX_ERR) != 0) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_RX_ERR|b, i,
- state->cb_data);
- if (rc == 0)
- rc = I2CERR_IO_ERROR;
- }
- }
- }
-
- if ((txtimeo > 0 && txcnt >= txtimeo) || \
- (rxtimeo > 0 && rxcnt >= rxtimeo)) {
- if (state->err_cb != NULL)
- (*state->err_cb)(I2CECB_TIMEOUT, -1, state->cb_data);
- if (rc == 0)
- rc = I2CERR_TIMEOUT;
- }
-
- return (rc);
-}
-
-static void
-i2c_probe_callback(int flags, int xnum, void *data)
-{
- /*
- * the only acceptable errors are a transmit NAK or a receive
- * overrun - tx NAK means the device does not exist, rx OV
- * means the device must have responded to the slave address
- * even though the transfer failed
- */
- if (flags == (I2CECB_TX_ERR|I2CECB_TX_NAK))
- *(int *)data |= 1;
- if (flags == (I2CECB_RX_ERR|I2CECB_RX_OV))
- *(int *)data |= 2;
-}
-
-int
-i2c_probe(uchar chip)
-{
- i2c_state_t state;
- int rc, err_flag;
- uchar buf[1];
-
- i2c_newio(&state);
-
- state.err_cb = i2c_probe_callback;
- state.cb_data = (void *) &err_flag;
- err_flag = 0;
-
- rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
-
- if (rc != 0)
- return (rc); /* probe failed */
-
- rc = i2c_doio(&state);
-
- if (rc == 0)
- return (0); /* device exists - read succeeded */
-
- if (rc == I2CERR_TIMEOUT)
- return (-1); /* device does not exist - timeout */
-
- if (rc != I2CERR_IO_ERROR || err_flag == 0)
- return (rc); /* probe failed */
-
- if (err_flag & 1)
- return (-1); /* device does not exist - had transmit NAK */
-
- return (0); /* device exists - had receive overrun */
-}
-
-
-int
-i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
- * and the extra bits end up in the "chip address" bit slots.
- * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
- * chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- printf("i2c_read: i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- printf("i2c_read: i2c_receive failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- printf("i2c_read: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-int
-i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones
- * like Catalyst 24WC04/08/16 which has 9/10/11 bits of address
- * and the extra bits end up in the "chip address" bit slots.
- * This makes a 24WC08 (1Kbyte) chip look like four 256 byte
- * chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- printf("i2c_write: first i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- printf("i2c_write: second i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- printf("i2c_write: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-#if defined(CONFIG_I2C_MULTI_BUS)
-/*
- * Functions for multiple I2C bus handling
- */
-unsigned int i2c_get_bus_num(void)
-{
- return i2c_bus_num;
-}
-
-int i2c_set_bus_num(unsigned int bus)
-{
-#if defined(CONFIG_I2C_MUX)
- if (bus < CONFIG_SYS_MAX_I2C_BUS) {
- i2c_bus_num = bus;
- } else {
- int ret;
-
- ret = i2x_mux_select_mux(bus);
- if (ret == 0)
- i2c_bus_num = bus;
- else
- return ret;
- }
-#else
- if (bus >= CONFIG_SYS_MAX_I2C_BUS)
- return -1;
- i2c_bus_num = bus;
-#endif
- return 0;
-}
-
-#endif /* CONFIG_I2C_MULTI_BUS */
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c
deleted file mode 100644
index a7700c4..0000000
--- a/cpu/mpc8260/interrupts.c
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 22-Oct-00
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <mpc8260_irq.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/****************************************************************************/
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-static struct irq_action irq_handlers[NR_IRQS];
-
-static ulong ppc_cached_irq_mask[NR_MASK_WORDS];
-
-/****************************************************************************/
-/* this section was ripped out of arch/ppc/kernel/ppc8260_pic.c in the */
-/* Linux/PPC 2.4.x source. There was no copyright notice in that file. */
-
-/* The 8260 internal interrupt controller. It is usually
- * the only interrupt controller.
- * There are two 32-bit registers (high/low) for up to 64
- * possible interrupts.
- *
- * Now, the fun starts.....Interrupt Numbers DO NOT MAP
- * in a simple arithmetic fashion to mask or pending registers.
- * That is, interrupt 4 does not map to bit position 4.
- * We create two tables, indexed by vector number, to indicate
- * which register to use and which bit in the register to use.
- */
-static u_char irq_to_siureg[] = {
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 1,
- 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-static u_char irq_to_siubit[] = {
- 31, 16, 17, 18, 19, 20, 21, 22,
- 23, 24, 25, 26, 27, 28, 29, 30,
- 29, 30, 16, 17, 18, 19, 20, 21,
- 22, 23, 24, 25, 26, 27, 28, 31,
- 0, 1, 2, 3, 4, 5, 6, 7,
- 8, 9, 10, 11, 12, 13, 14, 15,
- 15, 14, 13, 12, 11, 10, 9, 8,
- 7, 6, 5, 4, 3, 2, 1, 0
-};
-
-static void m8260_mask_irq (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void m8260_unmask_irq (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- ppc_cached_irq_mask[word] |= (1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
-}
-
-static void m8260_mask_and_ack (unsigned int irq_nr)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int bit, word;
- volatile uint *simr, *sipnr;
-
- bit = irq_to_siubit[irq_nr];
- word = irq_to_siureg[irq_nr];
-
- simr = &(immr->im_intctl.ic_simrh);
- sipnr = &(immr->im_intctl.ic_sipnrh);
- ppc_cached_irq_mask[word] &= ~(1 << (31 - bit));
- simr[word] = ppc_cached_irq_mask[word];
- sipnr[word] = 1 << (31 - bit);
-}
-
-static int m8260_get_irq (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- unsigned long bits;
-
- /* For MPC8260, read the SIVEC register and shift the bits down
- * to get the irq number. */
- bits = immr->im_intctl.ic_sivec;
- irq = bits >> 26;
- return irq;
-}
-
-/* end of code ripped out of arch/ppc/kernel/ppc8260_pic.c */
-/****************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
-
- /* Initialize the default interrupt mapping priorities */
- immr->im_intctl.ic_sicr = 0;
- immr->im_intctl.ic_siprr = 0x05309770;
- immr->im_intctl.ic_scprrh = 0x05309770;
- immr->im_intctl.ic_scprrl = 0x05309770;
-
- /* disable all interrupts and clear all pending bits */
- immr->im_intctl.ic_simrh = ppc_cached_irq_mask[0] = 0;
- immr->im_intctl.ic_simrl = ppc_cached_irq_mask[1] = 0;
- immr->im_intctl.ic_sipnrh = 0xffffffff;
- immr->im_intctl.ic_sipnrl = 0xffffffff;
-
-#ifdef CONFIG_HYMOD
- /*
- * ensure all external interrupt sources default to trigger on
- * high-to-low transition (i.e. edge triggered active low)
- */
- immr->im_intctl.ic_siexr = -1;
-#endif
-
- return (0);
-}
-
-/****************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- int irq, unmask = 1;
-
- irq = m8260_get_irq (regs);
-
- m8260_mask_and_ack (irq);
-
- enable_interrupts ();
-
- if (irq_handlers[irq].handler != NULL)
- (*irq_handlers[irq].handler) (irq_handlers[irq].arg);
- else {
- printf ("\nBogus External Interrupt IRQ %d\n", irq);
- /*
- * turn off the bogus interrupt, otherwise it
- * might repeat forever
- */
- unmask = 0;
- }
-
- if (unmask)
- m8260_unmask_irq (irq);
-}
-
-/****************************************************************************/
-
-/*
- * Install and free an interrupt handler.
- */
-
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf ("irq_install_handler: bad irq number %d\n", irq);
- return;
- }
-
- if (irq_handlers[irq].handler != NULL)
- printf ("irq_install_handler: 0x%08lx replacing 0x%08lx\n",
- (ulong) handler, (ulong) irq_handlers[irq].handler);
-
- irq_handlers[irq].handler = handler;
- irq_handlers[irq].arg = arg;
-
- m8260_unmask_irq (irq);
-}
-
-void irq_free_handler (int irq)
-{
- if (irq < 0 || irq >= NR_IRQS) {
- printf ("irq_free_handler: bad irq number %d\n", irq);
- return;
- }
-
- m8260_mask_irq (irq);
-
- irq_handlers[irq].handler = NULL;
- irq_handlers[irq].arg = NULL;
-}
-
-/****************************************************************************/
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-/****************************************************************************/
-
-#if defined(CONFIG_CMD_IRQ)
-
-/* ripped this out of ppc4xx/interrupts.c */
-
-/*******************************************************************************
-*
-* irqinfo - print information about PCI devices
-*
-*/
-void
-do_irqinfo (cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char *argv[])
-{
- int irq, re_enable;
-
- re_enable = disable_interrupts ();
-
- puts ("\nInterrupt-Information:\n"
- "Nr Routine Arg Count\n");
-
- for (irq = 0; irq < 32; irq++)
- if (irq_handlers[irq].handler != NULL)
- printf ("%02d %08lx %08lx %ld\n", irq,
- (ulong) irq_handlers[irq].handler,
- (ulong) irq_handlers[irq].arg,
- irq_handlers[irq].count);
-
- if (re_enable)
- enable_interrupts ();
-}
-
-#endif
diff --git a/cpu/mpc8260/kgdb.S b/cpu/mpc8260/kgdb.S
deleted file mode 100644
index c5936c7..0000000
--- a/cpu/mpc8260/kgdb.S
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8260.h>
-#include <version.h>
-
-#define CONFIG_8260 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- mfspr r3, HID0
- ori r3, r3, HID0_ICFI|HID0_DCI /* Invalidate All */
- SYNC
- mtspr HID0, r3
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c
deleted file mode 100644
index 6a14ba4..0000000
--- a/cpu/mpc8260/pci.c
+++ /dev/null
@@ -1,466 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 MontaVista Software, Inc.
- * Vitaly Bordug <vbordug@ru.mvista.com>
- * Added support for PCI bridge on MPC8272ADS
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <pci.h>
-#include <mpc8260.h>
-#include <asm/m8260_pci.h>
-#include <asm/io.h>
-#ifdef CONFIG_OF_LIBFDT
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-/*
- * Local->PCI map (from CPU) controlled by
- * MPC826x master window
- *
- * 0x80000000 - 0xBFFFFFFF CPU2PCI space PCIBR0
- * 0xF4000000 - 0xF7FFFFFF CPU2PCI space PCIBR1
- *
- * 0x80000000 - 0x9FFFFFFF 0x80000000 - 0x9FFFFFFF (Outbound ATU #1)
- * PCI Mem with prefetch
- *
- * 0xA0000000 - 0xBFFFFFFF 0xA0000000 - 0xBFFFFFFF (Outbound ATU #2)
- * PCI Mem w/o prefetch
- *
- * 0xF4000000 - 0xF7FFFFFF 0x00000000 - 0x03FFFFFF (Outbound ATU #3)
- * 32-bit PCI IO
- *
- * PCI->Local map (from PCI)
- * MPC826x slave window controlled by
- *
- * 0x00000000 - 0x1FFFFFFF 0x00000000 - 0x1FFFFFFF (Inbound ATU #1)
- * MPC826x local memory
- */
-
-/*
- * Slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
-
-#ifndef CONFIG_SYS_PCI_SLV_MEM_LOCAL
-#define PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE /* Local base */
-#else
-#define PCI_SLV_MEM_LOCAL CONFIG_SYS_PCI_SLV_MEM_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_SLV_MEM_BUS
-#define PCI_SLV_MEM_BUS 0x00000000 /* PCI base */
-#else
-#define PCI_SLV_MEM_BUS CONFIG_SYS_PCI_SLV_MEM_BUS
-#endif
-
-#ifndef CONFIG_SYS_PICMR0_MASK_ATTRIB
-#define PICMR0_MASK_ATTRIB (PICMR_MASK_512MB | PICMR_ENABLE | \
- PICMR_PREFETCH_EN)
-#else
-#define PICMR0_MASK_ATTRIB CONFIG_SYS_PICMR0_MASK_ATTRIB
-#endif
-
-/*
- * These are the windows that allow the CPU to access PCI address space.
- * All three PCI master windows, which allow the CPU to access PCI
- * prefetch, non prefetch, and IO space (see below), must all fit within
- * these windows.
- */
-
-/* PCIBR0 */
-#ifndef CONFIG_SYS_PCI_MSTR0_LOCAL
-#define PCI_MSTR0_LOCAL 0x80000000 /* Local base */
-#else
-#define PCI_MSTR0_LOCAL CONFIG_SYS_PCI_MSTR0_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCIMSK0_MASK
-#define PCIMSK0_MASK PCIMSK_1GB /* Size of window */
-#else
-#define PCIMSK0_MASK CONFIG_SYS_PCIMSK0_MASK
-#endif
-
-/* PCIBR1 */
-#ifndef CONFIG_SYS_PCI_MSTR1_LOCAL
-#define PCI_MSTR1_LOCAL 0xF4000000 /* Local base */
-#else
-#define PCI_MSTR1_LOCAL CONFIG_SYS_PCI_MSTR1_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCIMSK1_MASK
-#define PCIMSK1_MASK PCIMSK_64MB /* Size of window */
-#else
-#define PCIMSK1_MASK CONFIG_SYS_PCIMSK1_MASK
-#endif
-
-/*
- * Master window that allows the CPU to access PCI Memory (prefetch).
- * This window will be setup with the first set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#define PCI_MSTR_MEM_LOCAL 0x80000000 /* Local base */
-#else
-#define PCI_MSTR_MEM_LOCAL CONFIG_SYS_PCI_MSTR_MEM_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_BUS
-#define PCI_MSTR_MEM_BUS 0x80000000 /* PCI base */
-#else
-#define PCI_MSTR_MEM_BUS CONFIG_SYS_PCI_MSTR_MEM_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_MEM_START
-#define CPU_PCI_MEM_START PCI_MSTR_MEM_LOCAL
-#else
-#define CPU_PCI_MEM_START CONFIG_SYS_CPU_PCI_MEM_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEM_SIZE
-#define PCI_MSTR_MEM_SIZE 0x10000000 /* 256MB */
-#else
-#define PCI_MSTR_MEM_SIZE CONFIG_SYS_PCI_MSTR_MEM_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR0_MASK_ATTRIB
-#define POCMR0_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PREFETCH_EN)
-#else
-#define POCMR0_MASK_ATTRIB CONFIG_SYS_POCMR0_MASK_ATTRIB
-#endif
-
-/*
- * Master window that allows the CPU to access PCI Memory (non-prefetch).
- * This window will be setup with the second set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
-#define PCI_MSTR_MEMIO_LOCAL 0x90000000 /* Local base */
-#else
-#define PCI_MSTR_MEMIO_LOCAL CONFIG_SYS_PCI_MSTR_MEMIO_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_BUS
-#define PCI_MSTR_MEMIO_BUS 0x90000000 /* PCI base */
-#else
-#define PCI_MSTR_MEMIO_BUS CONFIG_SYS_PCI_MSTR_MEMIO_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_MEMIO_START
-#define CPU_PCI_MEMIO_START PCI_MSTR_MEMIO_LOCAL
-#else
-#define CPU_PCI_MEMIO_START CONFIG_SYS_CPU_PCI_MEMIO_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
-#define PCI_MSTR_MEMIO_SIZE 0x10000000 /* 256 MB */
-#else
-#define PCI_MSTR_MEMIO_SIZE CONFIG_SYS_PCI_MSTR_MEMIO_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR1_MASK_ATTRIB
-#define POCMR1_MASK_ATTRIB (POCMR_MASK_512MB | POCMR_ENABLE)
-#else
-#define POCMR1_MASK_ATTRIB CONFIG_SYS_POCMR1_MASK_ATTRIB
-#endif
-
-/*
- * Master window that allows the CPU to access PCI IO space.
- * This window will be setup with the third set of Outbound ATU registers
- * in the bridge.
- */
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_LOCAL
-#define PCI_MSTR_IO_LOCAL 0xA0000000 /* Local base */
-#else
-#define PCI_MSTR_IO_LOCAL CONFIG_SYS_PCI_MSTR_IO_LOCAL
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_BUS
-#define PCI_MSTR_IO_BUS 0xA0000000 /* PCI base */
-#else
-#define PCI_MSTR_IO_BUS CONFIG_SYS_PCI_MSTR_IO_BUS
-#endif
-
-#ifndef CONFIG_SYS_CPU_PCI_IO_START
-#define CPU_PCI_IO_START PCI_MSTR_IO_LOCAL
-#else
-#define CPU_PCI_IO_START CONFIG_SYS_CPU_PCI_IO_START
-#endif
-
-#ifndef CONFIG_SYS_PCI_MSTR_IO_SIZE
-#define PCI_MSTR_IO_SIZE 0x10000000 /* 256MB */
-#else
-#define PCI_MSTR_IO_SIZE CONFIG_SYS_PCI_MSTR_IO_SIZE
-#endif
-
-#ifndef CONFIG_SYS_POCMR2_MASK_ATTRIB
-#define POCMR2_MASK_ATTRIB (POCMR_MASK_256MB | POCMR_ENABLE | POCMR_PCI_IO)
-#else
-#define POCMR2_MASK_ATTRIB CONFIG_SYS_POCMR2_MASK_ATTRIB
-#endif
-
-/* PCI bus configuration registers.
- */
-
-#define PCI_CLASS_BRIDGE_CTLR 0x06
-
-
-static inline void pci_outl (u32 addr, u32 data)
-{
- *(volatile u32 *) addr = cpu_to_le32 (data);
-}
-
-void pci_mpc8250_init (struct pci_controller *hose)
-{
- u16 tempShort;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- pci_dev_t host_devno = PCI_BDF (0, 0, 0);
-
- pci_setup_indirect (hose, CONFIG_SYS_IMMR + PCI_CFG_ADDR_REG,
- CONFIG_SYS_IMMR + PCI_CFG_DATA_REG);
-
- /*
- * Setting required to enable local bus for PCI (SIUMCR [LBPC]).
- */
-#ifdef CONFIG_MPC8266ADS
- immap->im_siu_conf.sc_siumcr =
- (immap->im_siu_conf.sc_siumcr & ~SIUMCR_LBPC11)
- | SIUMCR_LBPC01;
-#elif defined(CONFIG_ADSTYPE) && CONFIG_ADSTYPE == CONFIG_SYS_PQ2FADS
-/* nothing to do for this board here */
-#elif defined CONFIG_MPC8272
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_BBD &
- ~SIUMCR_ESE &
- ~SIUMCR_PBSE &
- ~SIUMCR_CDIS &
- ~SIUMCR_DPPC11 &
- ~SIUMCR_L2CPC11 &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_APPC11 &
- ~SIUMCR_CS10PC11 &
- ~SIUMCR_BCTLC11 &
- ~SIUMCR_MMR11)
- | SIUMCR_DPPC11
- | SIUMCR_L2CPC01
- | SIUMCR_LBPC00
- | SIUMCR_APPC10
- | SIUMCR_CS10PC00
- | SIUMCR_BCTLC00
- | SIUMCR_MMR11;
-#elif defined(CONFIG_TQM8272)
-/* nothing to do for this Board here */
-#else
- /*
- * Setting required to enable IRQ1-IRQ7 (SIUMCR [DPPC]),
- * and local bus for PCI (SIUMCR [LBPC]).
- */
- immap->im_siu_conf.sc_siumcr = (immap->im_siu_conf.sc_siumcr &
- ~SIUMCR_LBPC11 &
- ~SIUMCR_CS10PC11 &
- ~SIUMCR_LBPC11) |
- SIUMCR_LBPC01 |
- SIUMCR_CS10PC01 |
- SIUMCR_APPC10;
-#endif
-
- /* Make PCI lowest priority */
- /* Each 4 bits is a device bus request and the MS 4bits
- is highest priority */
- /* Bus 4bit value
- --- ----------
- CPM high 0b0000
- CPM middle 0b0001
- CPM low 0b0010
- PCI reguest 0b0011
- Reserved 0b0100
- Reserved 0b0101
- Internal Core 0b0110
- External Master 1 0b0111
- External Master 2 0b1000
- External Master 3 0b1001
- The rest are reserved */
- immap->im_siu_conf.sc_ppc_alrh = 0x61207893;
-
- /* Park bus on core while modifying PCI Bus accesses */
- immap->im_siu_conf.sc_ppc_acr = 0x6;
-
- /*
- * Set up master windows that allow the CPU to access PCI space. These
- * windows are set up using the two SIU PCIBR registers.
- */
- immap->im_memctl.memc_pcimsk0 = PCIMSK0_MASK;
- immap->im_memctl.memc_pcibr0 = PCI_MSTR0_LOCAL | PCIBR_ENABLE;
-
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- immap->im_memctl.memc_pcimsk1 = PCIMSK1_MASK;
- immap->im_memctl.memc_pcibr1 = PCI_MSTR1_LOCAL | PCIBR_ENABLE;
-#endif
-
- /* Release PCI RST (by default the PCI RST signal is held low) */
- immap->im_pci.pci_gcr = cpu_to_le32 (PCIGCR_PCI_BUS_EN);
-
- /* give it some time */
- {
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- /* Give the PCI cards more time to initialize before query
- This might be good for other boards also
- */
- int i;
-
- for (i = 0; i < 1000; ++i)
-#endif
- udelay (1000);
- }
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (prefetch)
- * space. This window is set up using the first set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar0 = cpu_to_le32 (PCI_MSTR_MEM_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar0 = cpu_to_le32 (PCI_MSTR_MEM_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr0 = cpu_to_le32 (POCMR0_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up master window that allows the CPU to access PCI Memory (non-prefetch)
- * space. This window is set up using the second set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar1 = cpu_to_le32 (PCI_MSTR_MEMIO_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar1 = cpu_to_le32 (PCI_MSTR_MEMIO_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr1 = cpu_to_le32 (POCMR1_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up master window that allows the CPU to access PCI IO space. This window
- * is set up using the third set of Outbound ATU registers.
- */
- immap->im_pci.pci_potar2 = cpu_to_le32 (PCI_MSTR_IO_BUS >> 12); /* PCI base */
- immap->im_pci.pci_pobar2 = cpu_to_le32 (PCI_MSTR_IO_LOCAL >> 12); /* Local base */
- immap->im_pci.pci_pocmr2 = cpu_to_le32 (POCMR2_MASK_ATTRIB); /* Size & attribute */
-
- /*
- * Set up slave window that allows PCI masters to access MPC826x local memory.
- * This window is set up using the first set of Inbound ATU registers
- */
- immap->im_pci.pci_pitar0 = cpu_to_le32 (PCI_SLV_MEM_LOCAL >> 12); /* PCI base */
- immap->im_pci.pci_pibar0 = cpu_to_le32 (PCI_SLV_MEM_BUS >> 12); /* Local base */
- immap->im_pci.pci_picmr0 = cpu_to_le32 (PICMR0_MASK_ATTRIB); /* Size & attribute */
-
- /* See above for description - puts PCI request as highest priority */
-#ifdef CONFIG_MPC8272
- immap->im_siu_conf.sc_ppc_alrh = 0x01236745;
-#else
- immap->im_siu_conf.sc_ppc_alrh = 0x03124567;
-#endif
-
- /* Park the bus on the PCI */
- immap->im_siu_conf.sc_ppc_acr = PPC_ACR_BUS_PARK_PCI;
-
- /* Host mode - specify the bridge as a host-PCI bridge */
-
- pci_hose_write_config_byte (hose, host_devno, PCI_CLASS_CODE,
- PCI_CLASS_BRIDGE_CTLR);
-
- /* Enable the host bridge to be a master on the PCI bus, and to act as a PCI memory target */
- pci_hose_read_config_word (hose, host_devno, PCI_COMMAND, &tempShort);
- pci_hose_write_config_word (hose, host_devno, PCI_COMMAND,
- tempShort | PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY);
-
- /* do some bridge init, should be done on all 8260 based bridges */
- pci_hose_write_config_byte (hose, host_devno, PCI_CACHE_LINE_SIZE,
- 0x08);
- pci_hose_write_config_byte (hose, host_devno, PCI_LATENCY_TIMER,
- 0xF8);
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* System memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 || defined CONFIG_PM826
- pci_set_region (hose->regions + 0,
- PCI_SLV_MEM_BUS,
- PCI_SLV_MEM_LOCAL,
- gd->ram_size, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-#else
- pci_set_region (hose->regions + 0,
- CONFIG_SYS_SDRAM_BASE,
- CONFIG_SYS_SDRAM_BASE,
- 0x4000000, PCI_REGION_MEM | PCI_REGION_SYS_MEMORY);
-#endif
-
- /* PCI memory space */
-#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272
- pci_set_region (hose->regions + 1,
- PCI_MSTR_MEMIO_BUS,
- PCI_MSTR_MEMIO_LOCAL,
- PCI_MSTR_MEMIO_SIZE, PCI_REGION_MEM);
-#else
- pci_set_region (hose->regions + 1,
- PCI_MSTR_MEM_BUS,
- PCI_MSTR_MEM_LOCAL,
- PCI_MSTR_MEM_SIZE, PCI_REGION_MEM);
-#endif
-
- /* PCI I/O space */
- pci_set_region (hose->regions + 2,
- PCI_MSTR_IO_BUS,
- PCI_MSTR_IO_LOCAL, PCI_MSTR_IO_SIZE, PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose (hose);
- /* Mask off master abort machine checks */
- immap->im_pci.pci_emr &= cpu_to_le32 (~PCI_ERROR_PCI_NO_RSP);
- eieio ();
-
- hose->last_busno = pci_hose_scan (hose);
-
-
- /* clear the error in the error status register */
- immap->im_pci.pci_esr = cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
-
- /* unmask master abort machine checks */
- immap->im_pci.pci_emr |= cpu_to_le32 (PCI_ERROR_PCI_NO_RSP);
-}
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "pci", 4,
- "clock-frequency", gd->pci_clk, 1);
-}
-#endif
-
-#endif /* CONFIG_PCI */
diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c
deleted file mode 100644
index 4ab6a28..0000000
--- a/cpu/mpc8260/serial_scc.c
+++ /dev/null
@@ -1,498 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
- */
-
-/*
- * Minimal serial functions needed to use one of the SCC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SCC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
-
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
-
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
-
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
-
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-int serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr;
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(im->im_scc[SCC_INDEX]);
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
-
- /* Disable transmitter/receiver.
- */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- im->im_cpmux.cmx_scr = (im->im_cpmux.cmx_scr&~CMXSCR_MASK)|CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
- serial_setbrg ();
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->scc_gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(SCC_INDEX, gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile immap_t *im;
-
- if (c == '\n')
- serial_putc ('\r');
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
- unsigned char c;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-int
-serial_tstc()
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
-}
-
-#endif /* CONFIG_CONS_ON_SCC */
-
-#if defined(CONFIG_KGDB_ON_SCC)
-
-#if defined(CONFIG_CONS_ON_SCC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Whoops! serial console and kgdb are on the same scc serial port
-#endif
-
-#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SCC1 */
-
-#define KGDB_SCC_INDEX 0
-#define KGDB_PROFF_SCC PROFF_SCC1
-#define KGDB_CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SCC2 */
-
-#define KGDB_SCC_INDEX 1
-#define KGDB_PROFF_SCC PROFF_SCC2
-#define KGDB_CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 3 /* KGDB Port on SCC3 */
-
-#define KGDB_SCC_INDEX 2
-#define KGDB_PROFF_SCC PROFF_SCC3
-#define KGDB_CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_KGDB_INDEX == 4 /* KGDB Port on SCC4 */
-
-#define KGDB_SCC_INDEX 3
-#define KGDB_PROFF_SCC PROFF_SCC4
-#define KGDB_CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define KGDB_CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define KGDB_CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define KGDB_CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "kgdb serial port not correctly defined"
-
-#endif
-
-void
-kgdb_serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
- char *s, *e;
-
- if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
- ulong rate = simple_strtoul(s, &e, 10);
- if (e > s && *e == '\0')
- speed = rate;
- }
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(im->im_scc[KGDB_SCC_INDEX]);
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
-
- /* Disable transmitter/receiver.
- */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- im->im_cpmux.cmx_scr = \
- (im->im_cpmux.cmx_scr & ~KGDB_CMXSCR_MASK) | KGDB_CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
-#if defined(CONFIG_KGDB_USE_EXTC)
- m8260_cpm_extcbrg(KGDB_SCC_INDEX, speed,
- CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(KGDB_SCC_INDEX, speed);
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->scc_gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->scc_gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->scc_psmr = SCU_PSMR_FLC | SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SCC_PAGE, KGDB_CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->scc_gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- printf("SCC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
-}
-
-void
-putDebugChar(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile immap_t *im;
-
- if (c == '\n')
- putDebugChar ('\r');
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
- tbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-putDebugStr (const char *s)
-{
- while (*s) {
- putDebugChar (*s++);
- }
-}
-
-int
-getDebugChar(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im;
- unsigned char c;
-
- im = (immap_t *)CONFIG_SYS_IMMR;
- up = (scc_uart_t *)&im->im_dprambase[KGDB_PROFF_SCC];
- rbdf = (cbd_t *)&im->im_dprambase[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-
-#endif /* CONFIG_KGDB_ON_SCC */
diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c
deleted file mode 100644
index fbb3fb0..0000000
--- a/cpu/mpc8260/serial_smc.c
+++ /dev/null
@@ -1,467 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with
- * changes based on the file arch/ppc/mbxboot/m8260_tty.c from the
- * Linux/PPC sources (m8260_tty.c had no copyright info in it).
- */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/cpm_8260.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SMC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */
-
-#define SMC_INDEX 0
-#define PROFF_SMC_BASE PROFF_SMC1_BASE
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SMC2 */
-
-#define SMC_INDEX 1
-#define PROFF_SMC_BASE PROFF_SMC2_BASE
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-/* map rs_table index to baud rate generator index */
-static unsigned char brg_map[] = {
- 6, /* BRG7 for SMC1 */
- 7, /* BRG8 for SMC2 */
- 0, /* BRG1 for SCC1 */
- 1, /* BRG1 for SCC2 */
- 2, /* BRG1 for SCC3 */
- 3, /* BRG1 for SCC4 */
-};
-
-int serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[PROFF_SMC_BASE]) = PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- /* allocate size of struct serialbuffer with bd rx/tx,
- * buffer rx/tx and rx index
- */
- dpaddr = m8260_cpm_dpalloc((sizeof(serialbuffer_t)), 16);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[dpaddr];
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr = (im->im_cpmux.cmx_smr&~CMXSMR_MASK)|CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
- serial_setbrg ();
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SMC_PAGE, CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[SMC_INDEX], gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for last character to go. */
- while (rtx->txbd.cbd_sc & BD_SC_READY & BD_SC_READY)
- ;
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
-
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- ;
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr + rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-int
-serial_tstc()
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&(im->im_dprambase[PROFF_SMC]);
- rtx = (serialbuffer_t *)&im->im_dprambase[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-#endif /* CONFIG_CONS_ON_SMC */
-
-#if defined(CONFIG_KGDB_ON_SMC)
-
-#if defined(CONFIG_CONS_ON_SMC) && CONFIG_KGDB_INDEX == CONFIG_CONS_INDEX
-#error Whoops! serial console and kgdb are on the same smc serial port
-#endif
-
-#if CONFIG_KGDB_INDEX == 1 /* KGDB Port on SMC1 */
-
-#define KGDB_SMC_INDEX 0
-#define KGDB_PROFF_SMC_BASE PROFF_SMC1_BASE
-#define KGDB_PROFF_SMC PROFF_SMC1
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC1_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC1_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC1|CMXSMR_SMC1CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC1CS_BRG7
-
-#elif CONFIG_KGDB_INDEX == 2 /* KGDB Port on SMC2 */
-
-#define KGDB_SMC_INDEX 1
-#define KGDB_PROFF_SMC_BASE PROFF_SMC2_BASE
-#define KGDB_PROFF_SMC PROFF_SMC2
-#define KGDB_CPM_CR_SMC_PAGE CPM_CR_SMC2_PAGE
-#define KGDB_CPM_CR_SMC_SBLOCK CPM_CR_SMC2_SBLOCK
-#define KGDB_CMXSMR_MASK (CMXSMR_SMC2|CMXSMR_SMC2CS_MSK)
-#define KGDB_CMXSMR_VALUE CMXSMR_SMC2CS_BRG8
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-void
-kgdb_serial_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8260_t *cp = &(im->im_cpm);
- uint dpaddr, speed = CONFIG_KGDB_BAUDRATE;
- char *s, *e;
-
- if ((s = getenv("kgdbrate")) != NULL && *s != '\0') {
- ulong rate = simple_strtoul(s, &e, 10);
- if (e > s && *e == '\0')
- speed = rate;
- }
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(im->im_smc[KGDB_SMC_INDEX]);
- *(ushort *)(&im->im_dprambase[KGDB_PROFF_SMC_BASE]) = KGDB_PROFF_SMC;
- up = (smc_uart_t *)&im->im_dprambase[KGDB_PROFF_SMC];
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* NOTE: I/O port pins are set up via the iop_conf_tab[] table */
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8260_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&im->im_dprambase[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = CPMFCR_EB;
- up->smc_tfcr = CPMFCR_EB;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 0;
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
- /* put the SMC channel into NMSI (non multiplexd serial interface)
- * mode and wire either BRG7 to SMC1 or BRG8 to SMC2 (15-17).
- */
- im->im_cpmux.cmx_smr =
- (im->im_cpmux.cmx_smr & ~KGDB_CMXSMR_MASK) | KGDB_CMXSMR_VALUE;
-
- /* Set up the baud rate generator. */
-#if defined(CONFIG_KGDB_USE_EXTC)
- m8260_cpm_extcbrg(brg_map[KGDB_SMC_INDEX], speed,
- CONFIG_KGDB_EXTC_RATE, CONFIG_KGDB_EXTC_PINSEL);
-#else
- m8260_cpm_setbrg(brg_map[KGDB_SMC_INDEX], speed);
-#endif
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Single character receive. */
- up->smc_mrblr = 1;
- up->smc_maxidl = 0;
-
- /* Initialize Tx/Rx parameters. */
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(KGDB_CPM_CR_SMC_PAGE, KGDB_CPM_CR_SMC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- printf("SMC%d at %dbps ", CONFIG_KGDB_INDEX, speed);
-}
-
-void
-putDebugChar(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-
- if (c == '\n')
- putDebugChar ('\r');
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- tbdf = (cbd_t *)&im->im_dprambase[up->smc_tbase];
-
- /* Wait for last character to go. */
- buf = (char *)tbdf->cbd_bufaddr;
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-putDebugStr (const char *s)
-{
- while (*s) {
- putDebugChar (*s++);
- }
-}
-
-int
-getDebugChar(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- unsigned char c;
-
- up = (smc_uart_t *)&(im->im_dprambase[KGDB_PROFF_SMC]);
-
- rbdf = (cbd_t *)&im->im_dprambase[up->smc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-void
-kgdb_interruptible(int yes)
-{
- return;
-}
-
-#endif /* CONFIG_KGDB_ON_SMC */
diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c
deleted file mode 100644
index 0e1c2b0..0000000
--- a/cpu/mpc8260/speed.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8260.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
-extern unsigned long board_get_cpu_clk_f (void);
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-/* Bus-to-Core Multiplier */
-#define _1x 2
-#define _1_5x 3
-#define _2x 4
-#define _2_5x 5
-#define _3x 6
-#define _3_5x 7
-#define _4x 8
-#define _4_5x 9
-#define _5x 10
-#define _5_5x 11
-#define _6x 12
-#define _6_5x 13
-#define _7x 14
-#define _7_5x 15
-#define _8x 16
-#define _byp -1
-#define _off -2
-#define _unk -3
-
-typedef struct {
- int b2c_mult;
- int vco_div;
- char *freq_60x;
- char *freq_core;
-} corecnf_t;
-
-/*
- * this table based on "Errata to MPC8260 PowerQUICC II User's Manual",
- * Rev. 1, 8/2000, page 10.
- */
-corecnf_t corecnf_tab[] = {
- { _1_5x, 4, " 33-100", " 33-100" }, /* 0x00 */
- { _1x, 4, " 50-150", " 50-150" }, /* 0x01 */
- { _1x, 8, " 25-75 ", " 25-75 " }, /* 0x02 */
- { _byp, -1, " ?-? ", " ?-? " }, /* 0x03 */
- { _2x, 2, " 50-150", "100-300" }, /* 0x04 */
- { _2x, 4, " 25-75 ", " 50-150" }, /* 0x05 */
- { _2_5x, 2, " 40-120", "100-240" }, /* 0x06 */
- { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x07 */
- { _3x, 2, " 33-100", "100-300" }, /* 0x08 */
- { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x09 */
- { _4x, 2, " 25-75 ", "100-300" }, /* 0x0A */
- { _5x, 2, " 20-60 ", "100-300" }, /* 0x0B */
- { _1_5x, 8, " 16-50 ", " 16-50 " }, /* 0x0C */
- { _6x, 2, " 16-50 ", "100-300" }, /* 0x0D */
- { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x0E */
- { _off, -1, " ?-? ", " ?-? " }, /* 0x0F */
- { _3x, 4, " 16-50 ", " 50-150" }, /* 0x10 */
- { _2_5x, 4, " 20-60 ", " 50-120" }, /* 0x11 */
- { _6_5x, 2, " 15-46 ", "100-300" }, /* 0x12 */
- { _byp, -1, " ?-? ", " ?-? " }, /* 0x13 */
- { _7x, 2, " 14-43 ", "100-300" }, /* 0x14 */
- { _2x, 4, " 25-75 ", " 50-150" }, /* 0x15 */
- { _7_5x, 2, " 13-40 ", "100-300" }, /* 0x16 */
- { _4_5x, 2, " 22-65 ", "100-300" }, /* 0x17 */
- { _unk, -1, " ?-? ", " ?-? " }, /* 0x18 */
- { _5_5x, 2, " 18-55 ", "100-300" }, /* 0x19 */
- { _4x, 2, " 25-75 ", "100-300" }, /* 0x1A */
- { _5x, 2, " 20-60 ", "100-300" }, /* 0x1B */
- { _8x, 2, " 12-38 ", "100-300" }, /* 0x1C */
- { _6x, 2, " 16-50 ", "100-300" }, /* 0x1D */
- { _3_5x, 2, " 30-85 ", "100-300" }, /* 0x1E */
- { _off, -1, " ?-? ", " ?-? " }, /* 0x1F */
-};
-
-/* ------------------------------------------------------------------------- */
-
-/*
- *
- */
-
-int get_clocks (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong clkin;
- ulong sccr, dfbrg;
- ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf;
- corecnf_t *cp;
-
-#if !defined(CONFIG_8260_CLKIN)
-#error clock measuring not implemented yet - define CONFIG_8260_CLKIN
-#else
-#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
- clkin = board_get_cpu_clk_f ();
-#else
- clkin = CONFIG_8260_CLKIN;
-#endif
-#endif
-
- sccr = immap->im_clkrst.car_sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-
- scmr = immap->im_clkrst.car_scmr;
- corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- cp = &corecnf_tab[corecnf];
-
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
-
- /* HiP7, HiP7 Rev01, HiP7 RevA */
- if ((get_pvr () == PVR_8260_HIP7) ||
- (get_pvr () == PVR_8260_HIP7R1) ||
- (get_pvr () == PVR_8260_HIP7RA)) {
- pllmf = (scmr & SCMR_PLLMF_MSKH7) >> SCMR_PLLMF_SHIFT;
- gd->vco_out = clkin * (pllmf + 1);
- } else { /* HiP3, HiP4 */
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- gd->vco_out = (clkin * 2 * (pllmf + 1)) / (plldf + 1);
- }
-#if 0
- if (gd->vco_out / (busdf + 1) != clkin) {
- /* aaarrrggghhh!!! */
- return (1);
- }
-#endif
-
- gd->cpm_clk = gd->vco_out / 2;
- gd->bus_clk = clkin;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
-
- if (cp->b2c_mult > 0) {
- gd->cpu_clk = (clkin * cp->b2c_mult) / 2;
- } else {
- gd->cpu_clk = clkin;
- }
-
-#ifdef CONFIG_PCI
- gd->pci_clk = clkin;
-
- if (sccr & SCCR_PCI_MODE) {
- uint pci_div;
- uint pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
- if (sccr & SCCR_PCI_MODCK) {
- pci_div = 2;
- if (pcidf == 9) {
- pci_div *= 5;
- } else if (pcidf == 0xB) {
- pci_div *= 6;
- } else {
- pci_div *= (pcidf + 1);
- }
- } else {
- pci_div = pcidf + 1;
- }
-
- gd->pci_clk = (gd->cpm_clk * 2) / pci_div;
- }
-#endif
-
- return (0);
-}
-
-int prt_8260_clks (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- ulong sccr, dfbrg;
- ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf;
- corecnf_t *cp;
-
- sccr = immap->im_clkrst.car_sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-
- scmr = immap->im_clkrst.car_scmr;
- corecnf = (scmr & SCMR_CORECNF_MSK) >> SCMR_CORECNF_SHIFT;
- busdf = (scmr & SCMR_BUSDF_MSK) >> SCMR_BUSDF_SHIFT;
- cpmdf = (scmr & SCMR_CPMDF_MSK) >> SCMR_CPMDF_SHIFT;
- plldf = (scmr & SCMR_PLLDF) ? 1 : 0;
- pllmf = (scmr & SCMR_PLLMF_MSK) >> SCMR_PLLMF_SHIFT;
- pcidf = (sccr & SCCR_PCIDF_MSK) >> SCCR_PCIDF_SHIFT;
-
- cp = &corecnf_tab[corecnf];
-
- puts (CPU_ID_STR " Clock Configuration\n - Bus-to-Core Mult ");
-
- switch (cp->b2c_mult) {
- case _byp:
- puts ("BYPASS");
- break;
-
- case _off:
- puts ("OFF");
- break;
-
- case _unk:
- puts ("UNKNOWN");
- break;
-
- default:
- printf ("%d%sx",
- cp->b2c_mult / 2,
- (cp->b2c_mult % 2) ? ".5" : "");
- break;
- }
-
- printf (", VCO Div %d, 60x Bus Freq %s, Core Freq %s\n",
- cp->vco_div, cp->freq_60x, cp->freq_core);
-
- printf (" - dfbrg %ld, corecnf 0x%02lx, busdf %ld, cpmdf %ld, "
- "plldf %ld, pllmf %ld, pcidf %ld\n",
- dfbrg, corecnf, busdf, cpmdf,
- plldf, pllmf, pcidf);
-
- printf (" - vco_out %10ld, scc_clk %10ld, brg_clk %10ld\n",
- gd->vco_out, gd->scc_clk, gd->brg_clk);
-
- printf (" - cpu_clk %10ld, cpm_clk %10ld, bus_clk %10ld\n",
- gd->cpu_clk, gd->cpm_clk, gd->bus_clk);
-#ifdef CONFIG_PCI
- printf (" - pci_clk %10ld\n", gd->pci_clk);
-#endif
- putc ('\n');
-
- return (0);
-}
diff --git a/cpu/mpc8260/speed.h b/cpu/mpc8260/speed.h
deleted file mode 100644
index 3f32a14..0000000
--- a/cpu/mpc8260/speed.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*-----------------------------------------------------------------------
- * Timer value for timer 2, ICLK = 10
- *
- * SPEED_FCOUNT2 = GCLK / (16 * (TIMER_TMR_PS + 1))
- * SPEED_TMR3_PS = (GCLK / (16 * SPEED_FCOUNT3)) - 1
- *
- * SPEED_FCOUNT2 timer 2 counting frequency
- * GCLK CPU clock
- * SPEED_TMR2_PS prescaler
- */
-#define SPEED_TMR2_PS (250 - 1) /* divide by 250 */
-
-/*-----------------------------------------------------------------------
- * Timer value for PIT
- *
- * PIT_TIME = SPEED_PITC / PITRTCLK
- * PITRTCLK = 8192
- */
-#define SPEED_PITC (82 << 16) /* start counting from 82 */
-
-/*
- * The new value for PTA is calculated from
- *
- * PTA = (gclk * Trefresh) / (2 ^ (2 * DFBRG) * PTP * NCS)
- *
- * gclk CPU clock (not bus clock !)
- * Trefresh Refresh cycle * 4 (four word bursts used)
- * DFBRG For normal mode (no clock reduction) always 0
- * PTP Prescaler (already adjusted for no. of banks and 4K / 8K refresh)
- * NCS Number of SDRAM banks (chip selects) on this UPM.
- */
diff --git a/cpu/mpc8260/spi.c b/cpu/mpc8260/spi.c
deleted file mode 100644
index f5d2ac3..0000000
--- a/cpu/mpc8260/spi.c
+++ /dev/null
@@ -1,435 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001-2003 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8260 CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <asm/cpm_8260.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <net.h>
-
-#if defined(CONFIG_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0x2000 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0x2000
-#endif
-
-#define CPM_SPI_BASE 0x100
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER 0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((immap_t *)CONFIG_SYS_IMMR)->im_dprambase
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
- unsigned int dpaddr;
-
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- *(ushort *)(&immr->im_dprambase[PROFF_SPI_BASE]) = PROFF_SPI;
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
-/* 1 */
- /* ------------------------------------------------
- * Initialize Port D SPI pins
- * (we are only in Master Mode !)
- * ------------------------------------------------ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PPARD[16] = 1 [0x00008000] (SPIMISO)
- * PPARD[17] = 1 [0x00004000] (SPIMOSI)
- * PPARD[18] = 1 [0x00002000] (SPICLK)
- * PPARD[12] = 0 [0x00080000] -> GPIO: (CS for ATC EEPROM)
- * -------------------------------------------- */
- immr->im_ioport.iop_ppard |= 0x0000E000; /* set bits */
- immr->im_ioport.iop_ppard &= ~0x00080000; /* reset bit */
-
- /* ----------------------------------------------
- * In/Out or per. Function 0/1
- * PDIRD[16] = 0 [0x00008000] -> PERI1: SPIMISO
- * PDIRD[17] = 0 [0x00004000] -> PERI1: SPIMOSI
- * PDIRD[18] = 0 [0x00002000] -> PERI1: SPICLK
- * PDIRD[12] = 1 [0x00080000] -> GPIO OUT: CS for ATC EEPROM
- * ---------------------------------------------- */
- immr->im_ioport.iop_pdird &= ~0x0000E000;
- immr->im_ioport.iop_pdird |= 0x00080000;
-
- /* ----------------------------------------------
- * special option reg.
- * PSORD[16] = 1 [0x00008000] -> SPIMISO
- * PSORD[17] = 1 [0x00004000] -> SPIMOSI
- * PSORD[18] = 1 [0x00002000] -> SPICLK
- * ---------------------------------------------- */
- immr->im_ioport.iop_psord |= 0x0000E000;
-
- /* Initialize the parameter ram.
- * We need to make sure many things are initialized to zero
- */
- spi->spi_rstate = 0;
- spi->spi_rdp = 0;
- spi->spi_rbptr = 0;
- spi->spi_rbc = 0;
- spi->spi_rxtmp = 0;
- spi->spi_tstate = 0;
- spi->spi_tdp = 0;
- spi->spi_tbptr = 0;
- spi->spi_tbc = 0;
- spi->spi_txtmp = 0;
-
- /* Allocate space for one transmit and one receive buffer
- * descriptor in the DP ram
- */
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = m8260_cpm_dpalloc (sizeof(cbd_t)*2, 8);
-#else
- dpaddr = CPM_SPI_BASE;
-#endif
-
-/* 3 */
- /* Set up the SPI parameters in the parameter ram */
- spi->spi_rbase = dpaddr;
- spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
- /***********IMPORTANT******************/
-
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
- */
- spi->spi_rbptr = spi->spi_rbase;
- spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
- /* Init SPI Tx + Rx Parameters */
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_SPI_PAGE, CPM_CR_SPI_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
-
-/* 6 */
- /* Set to big endian. */
- spi->spi_tfcr = CPMFCR_EB;
- spi->spi_rfcr = CPMFCR_EB;
-
-/* 7 */
- /* Set maximum receive size. */
- spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- tbdf->cbd_sc &= ~BD_SC_READY;
- rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
- /* Set the bd's rx and tx buffer address pointers */
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
- immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
- immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
-
-
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *) malloc (MAX_BUFFER);
- txbuf = (uchar *) malloc (MAX_BUFFER);
-
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile cpm8260_t *cp;
- volatile spi_t *spi;
- cbd_t *tbdf, *rbdf;
- int tm;
-
- DPRINT (("*** spi_xfer entered ***\n"));
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8260_t *) &immr->im_cpm;
-
- spi = (spi_t *)&immr->im_dprambase[PROFF_SPI];
-
- tbdf = (cbd_t *) & immr->im_dprambase[spi->spi_tbase];
- rbdf = (cbd_t *) & immr->im_dprambase[spi->spi_rbase];
-
- /* Board-specific: Set CS for device (ATC EEPROM) */
- immr->im_ioport.iop_pdatd &= ~0x00080000;
-
- /* Setting tx bd status and data length */
- tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
- tbdf->cbd_datlen = count;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
- tbdf->cbd_datlen));
-
- /* Setting rx bd status and data length */
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- rbdf->cbd_datlen = 0; /* rx length has no significance */
-
- immr->im_spi.spi_spmode = SPMODE_REV |
- SPMODE_MSTR |
- SPMODE_EN |
- SPMODE_LEN(8) | /* 8 Bits per char */
- SPMODE_PM(0x8) ; /* medium speed */
- immr->im_spi.spi_spie = SPI_EMASK; /* Clear all SPI events */
- immr->im_spi.spi_spim = 0x00; /* Mask all SPI events */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- immr->im_spi.spi_spcom |= SPI_STR; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- if (immr->im_spi.spi_spie & SPI_TXB) { /* Tx Buffer Empty */
- DPRINT (("*** spi_xfer: Tx buffer empty\n"));
- break;
- }
- if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
- DPRINT (("*** spi_xfer: Tx BD done\n"));
- break;
- }
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
- DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
- printf ("\n");
-#endif
-
- /* Clear CS for device */
- immr->im_ioport.iop_pdatd |= 0x00080000;
-
- return count;
-}
-#endif /* CONFIG_SPI */
diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S
deleted file mode 100644
index 1fc70bc..0000000
--- a/cpu/mpc8260/start.S
+++ /dev/null
@@ -1,1023 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC8260 PowerPC based Embedded Boards
- */
-#include <config.h>
-#include <mpc8260.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_8260 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-/* Floating Point enable, Machine Check and Recoverable Interr. */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
-#if defined(CONFIG_HYMOD)
- GOT_ENTRY(environment)
-#endif
- END_GOT
-
-/*
- * Version string - must be in data segment because MPC8260 uses the first
- * 256 bytes for the Hard Reset Configuration Word table (see below).
- * Similarly, can't have the U-Boot Magic Number as the first thing in
- * the image - don't know how this will affect the image tools, but I guess
- * I'll find out soon
- */
- .data
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
-/*
- * Hard Reset Configuration Word (HRCW) table
- *
- * The Hard Reset Configuration Word (HRCW) sets a number of useful things
- * such as whether there is an external memory controller, whether the
- * PowerPC core is disabled (i.e. only the communications processor is
- * active, accessed by another CPU on the bus), whether using external
- * arbitration, external bus mode, boot port size, core initial prefix,
- * internal space base, boot memory space, etc.
- *
- * These things dictate where the processor begins execution, where the
- * boot ROM appears in memory, the memory controller setup when access
- * boot ROM, etc. The HRCW is *extremely* important.
- *
- * The HRCW is read from the bus during reset. One CPU on the bus will
- * be a hard reset configuration master, any others will be hard reset
- * configuration slaves. The master reads eight HRCWs from flash during
- * reset - the first it uses for itself, the other 7 it communicates to
- * up to 7 configuration slaves by some complicated mechanism, which is
- * not really important here.
- *
- * The configuration master performs 32 successive reads starting at address
- * 0 and incrementing by 8 each read (i.e. on 64 bit boundaries) but only 8
- * bits is read, and always from byte lane D[0-7] (so that port size of the
- * boot device does not matter). The first four reads form the 32 bit HRCW
- * for the master itself. The second four reads form the HRCW for the first
- * slave, and so on, up to seven slaves. The 32 bit HRCW is formed by
- * concatenating the four bytes, with the first read placed in byte 0 (the
- * most significant byte), and so on with the fourth read placed in byte 3
- * (the least significant byte).
- */
-#define _HRCW_TABLE_ENTRY(w) \
- .fill 8,1,(((w)>>24)&0xff); \
- .fill 8,1,(((w)>>16)&0xff); \
- .fill 8,1,(((w)>> 8)&0xff); \
- .fill 8,1,(((w) )&0xff)
- .text
- .globl _hrcw_table
-_hrcw_table:
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_MASTER)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE1)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE2)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE3)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE4)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE5)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE6)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_SLAVE7)
-/*
- * After configuration, a system reset exception is executed using the
- * vector at offset 0x100 relative to the base set by MSR[IP]. If MSR[IP]
- * is 0, the base address is 0x00000000. If MSR[IP] is 1, the base address
- * is 0xfff00000. In the case of a Power On Reset or Hard Reset, the value
- * of MSR[IP] is determined by the CIP field in the HRCW.
- *
- * Other bits in the HRCW set up the Base Address and Port Size in BR0.
- * This determines the location of the boot ROM (flash or EPROM) in the
- * processor's address space at boot time. As long as the HRCW is set up
- * so that we eventually end up executing the code below when the processor
- * executes the reset exception, the actual values used should not matter.
- *
- * Once we have got here, the address mask in OR0 is cleared so that the
- * bottom 32K of the boot ROM is effectively repeated all throughout the
- * processor's address space, after which we can jump to the absolute
- * address at which the boot ROM was linked at compile time, and proceed
- * to initialise the memory controller without worrying if the rug will be
- * pulled out from under us, so to speak (it will be fine as long as we
- * configure BR0 with the same boot ROM link address).
- */
- . = EXC_OFF_SYS_RESET
-
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-#if defined(CONFIG_MPC8260ADS) && defined(CONFIG_SYS_DEFAULT_IMMR)
- lis r3, CONFIG_SYS_DEFAULT_IMMR@h
- nop
- lwz r4, 0(r3)
- nop
- rlwinm r4, r4, 0, 8, 5
- nop
- oris r4, r4, 0x0200
- nop
- stw r4, 0(r3)
- nop
-#endif /* CONFIG_MPC8260ADS && CONFIG_SYS_DEFAULT_IMMR */
-boot_warm:
- mfmsr r5 /* save msr contents */
-
-#if defined(CONFIG_COGENT)
- /* this is what the cogent EPROM does */
- li r0, 0
- mtmsr r0
- isync
- bl cogent_init_8260
-#endif /* CONFIG_COGENT */
-
-#if defined(CONFIG_SYS_DEFAULT_IMMR)
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
- lis r4, CONFIG_SYS_DEFAULT_IMMR@h
- stw r3, 0x1A8(r4)
-#endif /* CONFIG_SYS_DEFAULT_IMMR */
-
- /* Initialise the MPC8260 processor core */
- /*--------------------------------------------------------------*/
-
- bl init_8260_core
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* When booting from ROM (Flash or EPROM), clear the */
- /* Address Mask in OR0 so ROM appears everywhere */
- /*--------------------------------------------------------------*/
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
- lwz r4, IM_OR0@l(r3)
- li r5, 0x7fff
- and r4, r4, r5
- stw r4, IM_OR0@l(r3)
-
- /* Calculate absolute address in FLASH and jump there */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /* initialize some things that are hard to access from C */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* set up stack in internal DPRAM */
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*--------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (in Flash)*/
-
-#ifdef DEBUG
- bl init_debug /* set up debugging stuff */
-#endif
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (in Flash)*/
-
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-#if defined(CONFIG_COGENT)
-
-/*
- * This code initialises the MPC8260 processor core
- * (conforms to PowerPC 603e spec)
- */
-
- .globl cogent_init_8260
-cogent_init_8260:
-
- /* Taken from page 14 of CMA282 manual */
- /*--------------------------------------------------------------*/
-
- lis r4, (CONFIG_SYS_IMMR+IM_REGBASE)@h
- lis r3, CONFIG_SYS_IMMR@h
- stw r3, IM_IMMR@l(r4)
- lwz r3, IM_IMMR@l(r4)
- stw r3, 0(r0)
- lis r3, CONFIG_SYS_SYPCR@h
- ori r3, r3, CONFIG_SYS_SYPCR@l
- stw r3, IM_SYPCR@l(r4)
- lwz r3, IM_SYPCR@l(r4)
- stw r3, 4(r0)
- lis r3, CONFIG_SYS_SCCR@h
- ori r3, r3, CONFIG_SYS_SCCR@l
- stw r3, IM_SCCR@l(r4)
- lwz r3, IM_SCCR@l(r4)
- stw r3, 8(r0)
-
- /* the rest of this was disassembled from the */
- /* EPROM code that came with my CMA282 CPU module */
- /*--------------------------------------------------------------*/
-
- lis r1, 0x1234
- ori r1, r1, 0x5678
- stw r1, 0x20(r0)
- lwz r1, 0x20(r0)
- stw r1, 0x24(r0)
- lwz r1, 0x24(r0)
- lis r3, 0x0e80
- ori r3, r3, 0
- stw r1, 4(r3)
- lwz r1, 4(r3)
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-#endif /* CONFIG_COGENT */
-
-/*
- * This code initialises the MPC8260 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
-
- .globl init_8260_core
-init_8260_core:
-
- /* Initialize machine status; enable machine check interrupt */
- /*--------------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- /* Initialise the SYPCR early, and reset the watchdog (if req) */
- /*--------------------------------------------------------------*/
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-#if !defined(CONFIG_COGENT)
- lis r4, CONFIG_SYS_SYPCR@h
- ori r4, r4, CONFIG_SYS_SYPCR@l
- stw r4, IM_SYPCR@l(r3)
-#endif /* !CONFIG_COGENT */
-#if defined(CONFIG_WATCHDOG)
- li r4, 21868 /* = 0x556c */
- sth r4, IM_SWSR@l(r3)
- li r4, -21959 /* = 0xaa39 */
- sth r4, IM_SWSR@l(r3)
-#endif /* CONFIG_WATCHDOG */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /*--------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, CONFIG_SYS_HID0_INIT@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, CONFIG_SYS_HID0_FINAL@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- mtspr HID2, r3
-
- /* clear all BAT's */
- /*--------------------------------------------------------------*/
-
- li r0, 0
- mtspr DBAT0U, r0
- mtspr DBAT0L, r0
- mtspr DBAT1U, r0
- mtspr DBAT1L, r0
- mtspr DBAT2U, r0
- mtspr DBAT2L, r0
- mtspr DBAT3U, r0
- mtspr DBAT3L, r0
- mtspr IBAT0U, r0
- mtspr IBAT0L, r0
- mtspr IBAT1U, r0
- mtspr IBAT1L, r0
- mtspr IBAT2U, r0
- mtspr IBAT2L, r0
- mtspr IBAT3U, r0
- mtspr IBAT3L, r0
- SYNC
-
- /* invalidate all tlb's */
- /* */
- /* From the 603e User Manual: "The 603e provides the ability to */
- /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */
- /* instruction invalidates the TLB entry indexed by the EA, and */
- /* operates on both the instruction and data TLBs simultaneously*/
- /* invalidating four TLB entries (both sets in each TLB). The */
- /* index corresponds to bits 15-19 of the EA. To invalidate all */
- /* entries within both TLBs, 32 tlbie instructions should be */
- /* issued, incrementing this field by one each time." */
- /* */
- /* "Note that the tlbia instruction is not implemented on the */
- /* 603e." */
- /* */
- /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */
- /* incrementing by 0x1000 each time. The code below is sort of */
- /* based on code in "flush_tlbs" from arch/ppc/kernel/head.S */
- /* */
- /*--------------------------------------------------------------*/
-
- li r3, 32
- mtctr r3
- li r3, 0
-1: tlbie r3
- addi r3, r3, 0x1000
- bdnz 1b
- SYNC
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-
-#ifdef DEBUG
-
-/*
- * initialise things related to debugging.
- *
- * must be called after the global offset table (GOT) is initialised
- * (GET_GOT) and after cpu_init_f() has executed.
- */
-
- .globl init_debug
-init_debug:
-
- lis r3, (CONFIG_SYS_IMMR+IM_REGBASE)@h
-
- /* Quick and dirty hack to enable the RAM and copy the */
- /* vectors so that we can take exceptions. */
- /*--------------------------------------------------------------*/
- /* write Memory Refresh Prescaler */
- li r4, CONFIG_SYS_MPTPR
- sth r4, IM_MPTPR@l(r3)
- /* write 60x Refresh Timer */
- li r4, CONFIG_SYS_PSRT
- stb r4, IM_PSRT@l(r3)
- /* init the 60x SDRAM Mode Register */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM)@l
- stw r4, IM_PSDMR@l(r3)
- /* write Precharge All Banks command */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_PREA)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* write eight CBR Refresh commands */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_CBRR)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- stb r0, 0(0)
- /* write Mode Register Write command */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_MRW)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* write Normal Operation command and enable Refresh */
- lis r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@h
- ori r4, r4, (CONFIG_SYS_PSDMR|PSDMR_OP_NORM|PSDMR_RFEN)@l
- stw r4, IM_PSDMR@l(r3)
- stb r0, 0(0)
- /* RAM should now be operational */
-
-#define VEC_WRD_CNT ((_end_of_vectors - _start + EXC_OFF_SYS_RESET) / 4)
- mflr r3
- GET_GOT
- mtlr r3
- lwz r3, GOT(_end_of_vectors)
- rlwinm r4, r3, 0, 18, 31 /* _end_of_vectors & 0x3FFF */
- lis r5, VEC_WRD_CNT@h
- ori r5, r5, VEC_WRD_CNT@l
- mtctr r5
-1:
- lwzu r5, -4(r3)
- stwu r5, -4(r4)
- bdnz 1b
-
- /* Load the Instruction Address Breakpoint Register (IABR). */
- /* */
- /* The address to load is stored in the first word of dual port */
- /* ram and should be preserved while the power is on, so you */
- /* can plug addresses into that location then reset the cpu and */
- /* this code will load that address into the IABR after the */
- /* reset. */
- /* */
- /* When the program counter matches the contents of the IABR, */
- /* an exception is generated (before the instruction at that */
- /* location completes). The vector for this exception is 0x1300 */
- /*--------------------------------------------------------------*/
- lis r3, CONFIG_SYS_IMMR@h
- lwz r3, 0(r3)
- mtspr IABR, r3
-
- /* Set the entire dual port RAM (where the initial stack */
- /* resides) to a known value - makes it easier to see where */
- /* the stack has been written */
- /*--------------------------------------------------------------*/
- lis r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r3, r3, (CONFIG_SYS_IMMR + CONFIG_SYS_INIT_SP_OFFSET)@l
- li r4, ((CONFIG_SYS_INIT_SP_OFFSET - 4) / 4)
- mtctr r4
- lis r4, 0xdeadbeaf@h
- ori r4, r4, 0xdeadbeaf@l
-1:
- stwu r4, -4(r3)
- bdnz 1b
-
- /* Done! */
- /*--------------------------------------------------------------*/
-
- blr
-#endif
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- lis r4, 0
- ori r4, r4, HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_DCE
- lis r4, 0
- ori r4, r4, HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_DCE|HID0_DLOCK
- andc r3, r3, r4
- ori r4, r3, HID0_DCI
- sync
- mtspr HID0, r4 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mfspr r7,HID0 /* don't do dcbst if dcache is disabled */
- rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31
- cmpwi r7,0
- beq 9f
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
-9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
- rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31
- cmpwi r7,0
- beq 7f
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
- lwz r4,GOT(_end)
-#endif
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
diff --git a/cpu/mpc8260/traps.c b/cpu/mpc8260/traps.c
deleted file mode 100644
index d216f71..0000000
--- a/cpu/mpc8260/traps.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/m8260_pci.h>
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- putc ('\n');
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-#ifdef CONFIG_PCI
-void dump_pci (void)
-{
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- printf ("PCI: err status %x err mask %x err ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_esr),
- le32_to_cpu (immap->im_pci.pci_emr),
- le32_to_cpu (immap->im_pci.pci_ecr));
- printf (" error address %x error data %x ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_eacr),
- le32_to_cpu (immap->im_pci.pci_edcr),
- le32_to_cpu (immap->im_pci.pci_eccr));
-
-}
-#endif
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
-#ifdef CONFIG_PCI
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-#ifdef DEBUG
- dump_pci();
-#endif
- /* clear the error in the error status register */
- if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
- immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
- return;
- }
-#endif
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check in kernel mode.\n"
- "Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- puts ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000>>15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-#ifdef CONFIG_PCI
- dump_pci();
-#endif
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
-
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8260/u-boot.lds b/cpu/mpc8260/u-boot.lds
deleted file mode 100644
index c777cf9..0000000
--- a/cpu/mpc8260/u-boot.lds
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * (C) Copyright 2001-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc8260/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc83xx/Makefile b/cpu/mpc83xx/Makefile
deleted file mode 100644
index 15e2c18..0000000
--- a/cpu/mpc83xx/Makefile
+++ /dev/null
@@ -1,62 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-
-COBJS-y += traps.o
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-COBJS-y += speed.o
-COBJS-y += interrupts.o
-COBJS-y += spd_sdram.o
-COBJS-y += ecc.o
-COBJS-$(CONFIG_QE) += qe_io.o
-COBJS-$(CONFIG_FSL_SERDES) += serdes.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-$(CONFIG_PCIE) += pcie.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-
-COBJS := $(COBJS-y)
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc83xx/config.mk b/cpu/mpc83xx/config.mk
deleted file mode 100644
index e80919b..0000000
--- a/cpu/mpc83xx/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# Copyright 2004 Freescale Semiconductor, Inc.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_MPC83xx -DCONFIG_E300 \
- -ffixed-r2 -msoft-float
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc83xx/u-boot.lds
diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c
deleted file mode 100644
index 51180d6..0000000
--- a/cpu/mpc83xx/cpu.c
+++ /dev/null
@@ -1,334 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code for the MPC83xx family.
- *
- * Derived from the MPC8260 and MPC85xx.
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-#include <libfdt.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <fsl_esdhc.h>
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-#include <asm/immap_qe.h>
-#include <asm/io.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu(void)
-{
- volatile immap_t *immr;
- ulong clock = gd->cpu_clk;
- u32 pvr = get_pvr();
- u32 spridr;
- char buf[32];
- int i;
-
- const struct cpu_type {
- char name[15];
- u32 partid;
- } cpu_type_list [] = {
- CPU_TYPE_ENTRY(8311),
- CPU_TYPE_ENTRY(8313),
- CPU_TYPE_ENTRY(8314),
- CPU_TYPE_ENTRY(8315),
- CPU_TYPE_ENTRY(8321),
- CPU_TYPE_ENTRY(8323),
- CPU_TYPE_ENTRY(8343),
- CPU_TYPE_ENTRY(8347_TBGA_),
- CPU_TYPE_ENTRY(8347_PBGA_),
- CPU_TYPE_ENTRY(8349),
- CPU_TYPE_ENTRY(8358_TBGA_),
- CPU_TYPE_ENTRY(8358_PBGA_),
- CPU_TYPE_ENTRY(8360),
- CPU_TYPE_ENTRY(8377),
- CPU_TYPE_ENTRY(8378),
- CPU_TYPE_ENTRY(8379),
- };
-
- immr = (immap_t *)CONFIG_SYS_IMMR;
-
- puts("CPU: ");
-
- switch (pvr & 0xffff0000) {
- case PVR_E300C1:
- printf("e300c1, ");
- break;
-
- case PVR_E300C2:
- printf("e300c2, ");
- break;
-
- case PVR_E300C3:
- printf("e300c3, ");
- break;
-
- case PVR_E300C4:
- printf("e300c4, ");
- break;
-
- default:
- printf("Unknown core, ");
- }
-
- spridr = immr->sysconf.spridr;
-
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++)
- if (cpu_type_list[i].partid == PARTID_NO_E(spridr)) {
- puts("MPC");
- puts(cpu_type_list[i].name);
- if (IS_E_PROCESSOR(spridr))
- puts("E");
- if (REVID_MAJOR(spridr) >= 2)
- puts("A");
- printf(", Rev: %d.%d", REVID_MAJOR(spridr),
- REVID_MINOR(spridr));
- break;
- }
-
- if (i == ARRAY_SIZE(cpu_type_list))
- printf("(SPRIDR %08x unknown), ", spridr);
-
- printf(" at %s MHz, ", strmhz(buf, clock));
-
- printf("CSB: %s MHz\n", strmhz(buf, gd->csb_clk));
-
- return 0;
-}
-
-
-/*
- * Program a UPM with the code supplied in the table.
- *
- * The 'dummy' variable is used to increment the MAD. 'dummy' is
- * supposed to be a pointer to the memory of the device being
- * programmed by the UPM. The data in the MDR is written into
- * memory and the MAD is incremented every time there's a write
- * to 'dummy'. Unfortunately, the current prototype for this
- * function doesn't allow for passing the address of this
- * device, and changing the prototype will break a number lots
- * of other code, so we need to use a round-about way of finding
- * the value for 'dummy'.
- *
- * The value can be extracted from the base address bits of the
- * Base Register (BR) associated with the specific UPM. To find
- * that BR, we need to scan all 8 BRs until we find the one that
- * has its MSEL bits matching the UPM we want. Once we know the
- * right BR, we can extract the base address bits from it.
- *
- * The MxMR and the BR and OR of the chosen bank should all be
- * configured before calling this function.
- *
- * Parameters:
- * upm: 0=UPMA, 1=UPMB, 2=UPMC
- * table: Pointer to an array of values to program
- * size: Number of elements in the array. Must be 64 or less.
- */
-void upmconfig (uint upm, uint *table, uint size)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile fsl_lbus_t *lbus = &immap->lbus;
- volatile uchar *dummy = NULL;
- const u32 msel = (upm + 4) << BR_MSEL_SHIFT; /* What the MSEL field in BRn should be */
- volatile u32 *mxmr = &lbus->mamr + upm; /* Pointer to mamr, mbmr, or mcmr */
- uint i;
-
- /* Scan all the banks to determine the base address of the device */
- for (i = 0; i < 8; i++) {
- if ((lbus->bank[i].br & BR_MSEL) == msel) {
- dummy = (uchar *) (lbus->bank[i].br & BR_BA);
- break;
- }
- }
-
- if (!dummy) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- /* Set the OP field in the MxMR to "write" and the MAD field to 000000 */
- *mxmr = (*mxmr & 0xCFFFFFC0) | 0x10000000;
-
- for (i = 0; i < size; i++) {
- lbus->mdr = table[i];
- __asm__ __volatile__ ("sync");
- *dummy = 0; /* Write the value to memory and increment MAD */
- __asm__ __volatile__ ("sync");
- while(((*mxmr & 0x3f) != ((i + 1) & 0x3f)));
- }
-
- /* Set the OP field in the MxMR to "normal" and the MAD field to 000000 */
- *mxmr &= 0xCFFFFFC0;
-}
-
-
-int
-do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr;
-#ifndef MPC83xx_RESET
- ulong addr;
-#endif
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- puts("Resetting the board.\n");
-
-#ifdef MPC83xx_RESET
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~( MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /* enable Reset Control Reg */
- immap->reset.rpr = 0x52535445;
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-
- /* confirm Reset Control Reg is enabled */
- while(!((immap->reset.rcer) & RCER_CRE));
-
- udelay(200);
-
- /* perform reset, only one bit */
- immap->reset.rcr = RCR_SWHR;
-
-#else /* ! MPC83xx_RESET */
-
- immap->reset.rmr = RMR_CSRE; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ __volatile__ ("mfmsr %0":"=r" (msr):);
-
- msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR);
- __asm__ __volatile__ ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
- addr = CONFIG_SYS_RESET_ADDRESS;
-
- ((void (*)(void)) addr) ();
-#endif /* MPC83xx_RESET */
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-
-unsigned long get_tbclk(void)
-{
- ulong tbclk;
-
- tbclk = (gd->bus_clk + 3L) / 4L;
-
- return tbclk;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts();
-
- /* Reset the 83xx watchdog */
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- immr->wdt.swsrr = 0x556c;
- immr->wdt.swsrr = 0xaa39;
-
- if (re_enable)
- enable_interrupts ();
-}
-#endif
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_UEC_ETH)
- uec_standard_init(bis);
-#endif
-
-#if defined(CONFIG_TSEC_ENET)
- tsec_standard_init(bis);
-#endif
- return 0;
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
- return fsl_esdhc_mmc_init(bis);
-#else
- return 0;
-#endif
-}
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-#if !defined(CONFIG_MPC8360)
-#error "CONFIG_BOOTCOUNT_LIMIT only for MPC8360 implemented"
-#endif
-
-#if !defined(CONFIG_BOOTCOUNT_ADDR)
-#define CONFIG_BOOTCOUNT_ADDR (0x110000 + QE_MURAM_SIZE - 2 * sizeof(unsigned long))
-#endif
-
-#include <asm/io.h>
-
-void bootcount_store (ulong a)
-{
- void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
- out_be32 (reg, a);
- out_be32 (reg + 4, BOOTCOUNT_MAGIC);
-}
-
-ulong bootcount_load (void)
-{
- void *reg = (void *)(CONFIG_SYS_IMMR + CONFIG_BOOTCOUNT_ADDR);
-
- if (in_be32 (reg + 4) != BOOTCOUNT_MAGIC)
- return 0;
- else
- return in_be32 (reg);
-}
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c
deleted file mode 100644
index 75b4522..0000000
--- a/cpu/mpc83xx/cpu_init.c
+++ /dev/null
@@ -1,548 +0,0 @@
-/*
- * Copyright (C) 2004-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <ioports.h>
-#include <asm/io.h>
-#ifdef CONFIG_USB_EHCI_FSL
-#include <usb/ehci-fsl.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_QE
-extern qe_iop_conf_t qe_iop_conf_tab[];
-extern void qe_config_iopin(u8 port, u8 pin, int dir,
- int open_drain, int assign);
-extern void qe_init(uint qe_base);
-extern void qe_reset(void);
-
-static void config_qe_ioports(void)
-{
- u8 port, pin;
- int dir, open_drain, assign;
- int i;
-
- for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
- port = qe_iop_conf_tab[i].port;
- pin = qe_iop_conf_tab[i].pin;
- dir = qe_iop_conf_tab[i].dir;
- open_drain = qe_iop_conf_tab[i].open_drain;
- assign = qe_iop_conf_tab[i].assign;
- qe_config_iopin(port, pin, dir, open_drain, assign);
- }
-}
-#endif
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
- __be32 acr_mask =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
- (ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
- (ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
- (ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
- (ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
- 0;
- __be32 acr_val =
-#ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_APARK /* Arbiter address parking mode */
- (CONFIG_SYS_ACR_APARK << ACR_APARK_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_ACR_PARKM /* Arbiter parking master */
- (CONFIG_SYS_ACR_PARKM << ACR_PARKM_SHIFT) |
-#endif
- 0;
- __be32 spcr_mask =
-#ifdef CONFIG_SYS_SPCR_OPT /* Optimize transactions between CSB and other dev */
- (SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
- (SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
- (SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
- (SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
- 0;
- __be32 spcr_val =
-#ifdef CONFIG_SYS_SPCR_OPT
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSECEP /* all eTSEC's Emergency priority */
- (CONFIG_SYS_SPCR_TSECEP << SPCR_TSECEP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC1EP /* TSEC1 Emergency priority */
- (CONFIG_SYS_SPCR_TSEC1EP << SPCR_TSEC1EP_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SPCR_TSEC2EP /* TSEC2 Emergency priority */
- (CONFIG_SYS_SPCR_TSEC2EP << SPCR_TSEC2EP_SHIFT) |
-#endif
- 0;
- __be32 sccr_mask =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
- (SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
- (SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
- (SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
- (SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
- (SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
- (SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
- (SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
- (SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
- (SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
- (SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
- 0;
- __be32 sccr_val =
-#ifdef CONFIG_SYS_SCCR_ENCCM /* Encryption clock mode */
- (CONFIG_SYS_SCCR_ENCCM << SCCR_ENCCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_PCICM /* PCI & DMA clock mode */
- (CONFIG_SYS_SCCR_PCICM << SCCR_PCICM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSECCM /* all TSEC's clock mode */
- (CONFIG_SYS_SCCR_TSECCM << SCCR_TSECCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1CM /* TSEC1 clock mode */
- (CONFIG_SYS_SCCR_TSEC1CM << SCCR_TSEC1CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2CM /* TSEC2 clock mode */
- (CONFIG_SYS_SCCR_TSEC2CM << SCCR_TSEC2CM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC1ON /* TSEC1 clock switch */
- (CONFIG_SYS_SCCR_TSEC1ON << SCCR_TSEC1ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_TSEC2ON /* TSEC2 clock switch */
- (CONFIG_SYS_SCCR_TSEC2ON << SCCR_TSEC2ON_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBMPHCM /* USB MPH clock mode */
- (CONFIG_SYS_SCCR_USBMPHCM << SCCR_USBMPHCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_USBDRCM /* USB DR clock mode */
- (CONFIG_SYS_SCCR_USBDRCM << SCCR_USBDRCM_SHIFT) |
-#endif
-#ifdef CONFIG_SYS_SCCR_SATACM /* SATA controller clock mode */
- (CONFIG_SYS_SCCR_SATACM << SCCR_SATACM_SHIFT) |
-#endif
- 0;
- __be32 lcrr_mask =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
- LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC /* external address delay */
- LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
- LCRR_CLKDIV |
-#endif
- 0;
- __be32 lcrr_val =
-#ifdef CONFIG_SYS_LCRR_DBYP /* PLL bypass */
- CONFIG_SYS_LCRR_DBYP |
-#endif
-#ifdef CONFIG_SYS_LCRR_EADC
- CONFIG_SYS_LCRR_EADC |
-#endif
-#ifdef CONFIG_SYS_LCRR_CLKDIV /* system clock divider */
- CONFIG_SYS_LCRR_CLKDIV |
-#endif
- 0;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
- /* system performance tweaking */
- clrsetbits_be32(&im->arbiter.acr, acr_mask, acr_val);
-
- clrsetbits_be32(&im->sysconf.spcr, spcr_mask, spcr_val);
-
- clrsetbits_be32(&im->clk.sccr, sccr_mask, sccr_val);
-
- /* RSR - Reset Status Register - clear all status (4.6.1.3) */
- gd->reset_status = __raw_readl(&im->reset.rsr);
- __raw_writel(~(RSR_RES), &im->reset.rsr);
-
- /* AER - Arbiter Event Register - store status */
- gd->arbiter_event_attributes = __raw_readl(&im->arbiter.aeatr);
- gd->arbiter_event_address = __raw_readl(&im->arbiter.aeadr);
-
- /*
- * RMR - Reset Mode Register
- * contains checkstop reset enable (4.6.1.4)
- */
- __raw_writel(RMR_CSRE & (1<<RMR_CSRE_SHIFT), &im->reset.rmr);
-
- /* LCRR - Clock Ratio Register (10.3.1.16)
- * write, read, and isync per MPC8379ERM rev.1 CLKDEV field description
- */
- clrsetbits_be32(&im->lbus.lcrr, lcrr_mask, lcrr_val);
- __raw_readl(&im->lbus.lcrr);
- isync();
-
- /* Enable Time Base & Decrementer ( so we will have udelay() )*/
- setbits_be32(&im->sysconf.spcr, SPCR_TBEN);
-
- /* System General Purpose Register */
-#ifdef CONFIG_SYS_SICRH
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC8313)
- /* regarding to MPC34x manual rev.1 bits 28..29 must be preserved */
- __raw_writel((im->sysconf.sicrh & 0x0000000C) | CONFIG_SYS_SICRH,
- &im->sysconf.sicrh);
-#else
- __raw_writel(CONFIG_SYS_SICRH, &im->sysconf.sicrh);
-#endif
-#endif
-#ifdef CONFIG_SYS_SICRL
- __raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
-#endif
-#ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
- __raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
-#endif
-#ifdef CONFIG_SYS_OBIR /* Output buffer impedance register */
- __raw_writel(CONFIG_SYS_OBIR, &im->sysconf.obir);
-#endif
-
-#ifdef CONFIG_QE
- /* Config QE ioports */
- config_qe_ioports();
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_BR0_PRELIM) \
- && defined(CONFIG_SYS_OR0_PRELIM) \
- && defined(CONFIG_SYS_LBLAWBAR0_PRELIM) \
- && defined(CONFIG_SYS_LBLAWAR0_PRELIM)
- im->lbus.bank[0].br = CONFIG_SYS_BR0_PRELIM;
- im->lbus.bank[0].or = CONFIG_SYS_OR0_PRELIM;
- im->sysconf.lblaw[0].bar = CONFIG_SYS_LBLAWBAR0_PRELIM;
- im->sysconf.lblaw[0].ar = CONFIG_SYS_LBLAWAR0_PRELIM;
-#else
-#error CONFIG_SYS_BR0_PRELIM, CONFIG_SYS_OR0_PRELIM, CONFIG_SYS_LBLAWBAR0_PRELIM & CONFIG_SYS_LBLAWAR0_PRELIM must be defined
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- im->lbus.bank[1].br = CONFIG_SYS_BR1_PRELIM;
- im->lbus.bank[1].or = CONFIG_SYS_OR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR1_PRELIM) && defined(CONFIG_SYS_LBLAWAR1_PRELIM)
- im->sysconf.lblaw[1].bar = CONFIG_SYS_LBLAWBAR1_PRELIM;
- im->sysconf.lblaw[1].ar = CONFIG_SYS_LBLAWAR1_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- im->lbus.bank[2].br = CONFIG_SYS_BR2_PRELIM;
- im->lbus.bank[2].or = CONFIG_SYS_OR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR2_PRELIM) && defined(CONFIG_SYS_LBLAWAR2_PRELIM)
- im->sysconf.lblaw[2].bar = CONFIG_SYS_LBLAWBAR2_PRELIM;
- im->sysconf.lblaw[2].ar = CONFIG_SYS_LBLAWAR2_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- im->lbus.bank[3].br = CONFIG_SYS_BR3_PRELIM;
- im->lbus.bank[3].or = CONFIG_SYS_OR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR3_PRELIM) && defined(CONFIG_SYS_LBLAWAR3_PRELIM)
- im->sysconf.lblaw[3].bar = CONFIG_SYS_LBLAWBAR3_PRELIM;
- im->sysconf.lblaw[3].ar = CONFIG_SYS_LBLAWAR3_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- im->lbus.bank[4].br = CONFIG_SYS_BR4_PRELIM;
- im->lbus.bank[4].or = CONFIG_SYS_OR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR4_PRELIM) && defined(CONFIG_SYS_LBLAWAR4_PRELIM)
- im->sysconf.lblaw[4].bar = CONFIG_SYS_LBLAWBAR4_PRELIM;
- im->sysconf.lblaw[4].ar = CONFIG_SYS_LBLAWAR4_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- im->lbus.bank[5].br = CONFIG_SYS_BR5_PRELIM;
- im->lbus.bank[5].or = CONFIG_SYS_OR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR5_PRELIM) && defined(CONFIG_SYS_LBLAWAR5_PRELIM)
- im->sysconf.lblaw[5].bar = CONFIG_SYS_LBLAWBAR5_PRELIM;
- im->sysconf.lblaw[5].ar = CONFIG_SYS_LBLAWAR5_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- im->lbus.bank[6].br = CONFIG_SYS_BR6_PRELIM;
- im->lbus.bank[6].or = CONFIG_SYS_OR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR6_PRELIM) && defined(CONFIG_SYS_LBLAWAR6_PRELIM)
- im->sysconf.lblaw[6].bar = CONFIG_SYS_LBLAWBAR6_PRELIM;
- im->sysconf.lblaw[6].ar = CONFIG_SYS_LBLAWAR6_PRELIM;
-#endif
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- im->lbus.bank[7].br = CONFIG_SYS_BR7_PRELIM;
- im->lbus.bank[7].or = CONFIG_SYS_OR7_PRELIM;
-#endif
-#if defined(CONFIG_SYS_LBLAWBAR7_PRELIM) && defined(CONFIG_SYS_LBLAWAR7_PRELIM)
- im->sysconf.lblaw[7].bar = CONFIG_SYS_LBLAWBAR7_PRELIM;
- im->sysconf.lblaw[7].ar = CONFIG_SYS_LBLAWAR7_PRELIM;
-#endif
-#ifdef CONFIG_SYS_GPIO1_PRELIM
- im->gpio[0].dat = CONFIG_SYS_GPIO1_DAT;
- im->gpio[0].dir = CONFIG_SYS_GPIO1_DIR;
-#endif
-#ifdef CONFIG_SYS_GPIO2_PRELIM
- im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT;
- im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR;
-#endif
-#ifdef CONFIG_USB_EHCI_FSL
-#ifndef CONFIG_MPC834x
- uint32_t temp;
- struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR;
-
- /* Configure interface. */
- setbits_be32(&ehci->control, REFSEL_16MHZ | UTMI_PHY_EN);
-
- /* Wait for clock to stabilize */
- do {
- temp = __raw_readl(&ehci->control);
- udelay(1000);
- } while (!(temp & PHY_CLK_VALID));
-#endif
-#endif
-}
-
-int cpu_init_r (void)
-{
-#ifdef CONFIG_QE
- uint qe_base = CONFIG_SYS_IMMR + 0x00100000; /* QE immr base */
-
- qe_init(qe_base);
- qe_reset();
-#endif
- return 0;
-}
-
-/*
- * Print out the bus arbiter event
- */
-#if defined(CONFIG_DISPLAY_AER_FULL)
-static int print_83xx_arb_event(int force)
-{
- static char* event[] = {
- "Address Time Out",
- "Data Time Out",
- "Address Only Transfer Type",
- "External Control Word Transfer Type",
- "Reserved Transfer Type",
- "Transfer Error",
- "reserved",
- "reserved"
- };
- static char* master[] = {
- "e300 Core Data Transaction",
- "reserved",
- "e300 Core Instruction Fetch",
- "reserved",
- "TSEC1",
- "TSEC2",
- "USB MPH",
- "USB DR",
- "Encryption Core",
- "I2C Boot Sequencer",
- "JTAG",
- "reserved",
- "eSDHC",
- "PCI1",
- "PCI2",
- "DMA",
- "QUICC Engine 00",
- "QUICC Engine 01",
- "QUICC Engine 10",
- "QUICC Engine 11",
- "reserved",
- "reserved",
- "reserved",
- "reserved",
- "SATA1",
- "SATA2",
- "SATA3",
- "SATA4",
- "reserved",
- "PCI Express 1",
- "PCI Express 2",
- "TDM-DMAC"
- };
- static char *transfer[] = {
- "Address-only, Clean Block",
- "Address-only, lwarx reservation set",
- "Single-beat or Burst write",
- "reserved",
- "Address-only, Flush Block",
- "reserved",
- "Burst write",
- "reserved",
- "Address-only, sync",
- "Address-only, tlbsync",
- "Single-beat or Burst read",
- "Single-beat or Burst read",
- "Address-only, Kill Block",
- "Address-only, icbi",
- "Burst read",
- "reserved",
- "Address-only, eieio",
- "reserved",
- "Single-beat write",
- "reserved",
- "ecowx - Illegal single-beat write",
- "reserved",
- "reserved",
- "reserved",
- "Address-only, TLB Invalidate",
- "reserved",
- "Single-beat or Burst read",
- "reserved",
- "eciwx - Illegal single-beat read",
- "reserved",
- "Burst read",
- "reserved"
- };
-
- int etype = (gd->arbiter_event_attributes & AEATR_EVENT)
- >> AEATR_EVENT_SHIFT;
- int mstr_id = (gd->arbiter_event_attributes & AEATR_MSTR_ID)
- >> AEATR_MSTR_ID_SHIFT;
- int tbst = (gd->arbiter_event_attributes & AEATR_TBST)
- >> AEATR_TBST_SHIFT;
- int tsize = (gd->arbiter_event_attributes & AEATR_TSIZE)
- >> AEATR_TSIZE_SHIFT;
- int ttype = (gd->arbiter_event_attributes & AEATR_TTYPE)
- >> AEATR_TTYPE_SHIFT;
-
- if (!force && !gd->arbiter_event_address)
- return 0;
-
- puts("Arbiter Event Status:\n");
- printf(" Event Address: 0x%08lX\n", gd->arbiter_event_address);
- printf(" Event Type: 0x%1x = %s\n", etype, event[etype]);
- printf(" Master ID: 0x%02x = %s\n", mstr_id, master[mstr_id]);
- printf(" Transfer Size: 0x%1x = %d bytes\n", (tbst<<3) | tsize,
- tbst ? (tsize ? tsize : 8) : 16 + 8 * tsize);
- printf(" Transfer Type: 0x%02x = %s\n", ttype, transfer[ttype]);
-
- return gd->arbiter_event_address;
-}
-
-#elif defined(CONFIG_DISPLAY_AER_BRIEF)
-
-static int print_83xx_arb_event(int force)
-{
- if (!force && !gd->arbiter_event_address)
- return 0;
-
- printf("Arbiter Event Status: AEATR=0x%08lX, AEADR=0x%08lX\n",
- gd->arbiter_event_attributes, gd->arbiter_event_address);
-
- return gd->arbiter_event_address;
-}
-#endif /* CONFIG_DISPLAY_AER_xxxx */
-
-/*
- * Figure out the cause of the reset
- */
-int prt_83xx_rsr(void)
-{
- static struct {
- ulong mask;
- char *desc;
- } bits[] = {
- {
- RSR_SWSR, "Software Soft"}, {
- RSR_SWHR, "Software Hard"}, {
- RSR_JSRS, "JTAG Soft"}, {
- RSR_CSHR, "Check Stop"}, {
- RSR_SWRS, "Software Watchdog"}, {
- RSR_BMRS, "Bus Monitor"}, {
- RSR_SRS, "External/Internal Soft"}, {
- RSR_HRS, "External/Internal Hard"}
- };
- static int n = sizeof bits / sizeof bits[0];
- ulong rsr = gd->reset_status;
- int i;
- char *sep;
-
- puts("Reset Status:");
-
- sep = " ";
- for (i = 0; i < n; i++)
- if (rsr & bits[i].mask) {
- printf("%s%s", sep, bits[i].desc);
- sep = ", ";
- }
- puts("\n");
-
-#if defined(CONFIG_DISPLAY_AER_FULL) || defined(CONFIG_DISPLAY_AER_BRIEF)
- print_83xx_arb_event(rsr & RSR_BMRS);
-#endif
- puts("\n");
-
- return 0;
-}
diff --git a/cpu/mpc83xx/ecc.c b/cpu/mpc83xx/ecc.c
deleted file mode 100644
index f3942b4..0000000
--- a/cpu/mpc83xx/ecc.c
+++ /dev/null
@@ -1,390 +0,0 @@
-/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on the contribution of Marian Balakowicz <m8@semihalf.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_DDR_ECC_CMD)
-void ecc_print_status(void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
-
- printf("\nECC mode: %s\n\n",
- (ddr->sdram_cfg & SDRAM_CFG_ECC_EN) ? "ON" : "OFF");
-
- /* Interrupts */
- printf("Memory Error Interrupt Enable:\n");
- printf(" Multiple-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MBEE) ? 1 : 0);
- printf(" Single-Bit Error Interrupt Enable: %d\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_SBEE) ? 1 : 0);
- printf(" Memory Select Error Interrupt Enable: %d\n\n",
- (ddr->err_int_en & ECC_ERR_INT_EN_MSEE) ? 1 : 0);
-
- /* Error disable */
- printf("Memory Error Disable:\n");
- printf(" Multiple-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MBED) ? 1 : 0);
- printf(" Sinle-Bit Error Disable: %d\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_SBED) ? 1 : 0);
- printf(" Memory Select Error Disable: %d\n\n",
- (ddr->err_disable & ECC_ERROR_DISABLE_MSED) ? 1 : 0);
-
- /* Error injection */
- printf("Memory Data Path Error Injection Mask High/Low: %08x %08x\n",
- ddr->data_err_inject_hi, ddr->data_err_inject_lo);
-
- printf("Memory Data Path Error Injection Mask ECC:\n");
- printf(" ECC Mirror Byte: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EMB) ? 1 : 0);
- printf(" ECC Injection Enable: %d\n",
- (ddr->ecc_err_inject & ECC_ERR_INJECT_EIEN) ? 1 : 0);
- printf(" ECC Error Injection Mask: 0x%02x\n\n",
- ddr->ecc_err_inject & ECC_ERR_INJECT_EEIM);
-
- /* SBE counter/threshold */
- printf("Memory Single-Bit Error Management (0..255):\n");
- printf(" Single-Bit Error Threshold: %d\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBET) >> ECC_ERROR_MAN_SBET_SHIFT);
- printf(" Single-Bit Error Counter: %d\n\n",
- (ddr->err_sbe & ECC_ERROR_MAN_SBEC) >> ECC_ERROR_MAN_SBEC_SHIFT);
-
- /* Error detect */
- printf("Memory Error Detect:\n");
- printf(" Multiple Memory Errors: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MME) ? 1 : 0);
- printf(" Multiple-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MBE) ? 1 : 0);
- printf(" Single-Bit Error: %d\n",
- (ddr->err_detect & ECC_ERROR_DETECT_SBE) ? 1 : 0);
- printf(" Memory Select Error: %d\n\n",
- (ddr->err_detect & ECC_ERROR_DETECT_MSE) ? 1 : 0);
-
- /* Capture data */
- printf("Memory Error Address Capture: 0x%08x\n", ddr->capture_address);
- printf("Memory Data Path Read Capture High/Low: %08x %08x\n",
- ddr->capture_data_hi, ddr->capture_data_lo);
- printf("Memory Data Path Read Capture ECC: 0x%02x\n\n",
- ddr->capture_ecc & CAPTURE_ECC_ECE);
-
- printf("Memory Error Attributes Capture:\n");
- printf(" Data Beat Number: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_BNUM) >>
- ECC_CAPT_ATTR_BNUM_SHIFT);
- printf(" Transaction Size: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSIZ) >>
- ECC_CAPT_ATTR_TSIZ_SHIFT);
- printf(" Transaction Source: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TSRC) >>
- ECC_CAPT_ATTR_TSRC_SHIFT);
- printf(" Transaction Type: %d\n",
- (ddr->capture_attributes & ECC_CAPT_ATTR_TTYP) >>
- ECC_CAPT_ATTR_TTYP_SHIFT);
- printf(" Error Information Valid: %d\n\n",
- ddr->capture_attributes & ECC_CAPT_ATTR_VLD);
-}
-
-int do_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile u32 val;
- u64 *addr;
- u32 count;
- register u64 *i;
- u32 ret[2];
- u32 pattern[2];
- u32 writeback[2];
-
- /* The pattern is written into memory to generate error */
- pattern[0] = 0xfedcba98UL;
- pattern[1] = 0x76543210UL;
-
- /* After injecting error, re-initialize the memory with the value */
- writeback[0] = 0x01234567UL;
- writeback[1] = 0x89abcdefUL;
-
- if (argc > 4) {
- cmd_usage(cmdtp);
- return 1;
- }
-
- if (argc == 2) {
- if (strcmp(argv[1], "status") == 0) {
- ecc_print_status();
- return 0;
- } else if (strcmp(argv[1], "captureclear") == 0) {
- ddr->capture_address = 0;
- ddr->capture_data_hi = 0;
- ddr->capture_data_lo = 0;
- ddr->capture_ecc = 0;
- ddr->capture_attributes = 0;
- return 0;
- }
- }
- if (argc == 3) {
- if (strcmp(argv[1], "sbecnt") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBEC_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBET);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "sbethr") == 0) {
- val = simple_strtoul(argv[2], NULL, 10);
- if (val > 255) {
- printf("Incorrect Counter value, "
- "should be 0..255\n");
- return 1;
- }
-
- val = (val << ECC_ERROR_MAN_SBET_SHIFT);
- val |= (ddr->err_sbe & ECC_ERROR_MAN_SBEC);
-
- ddr->err_sbe = val;
- return 0;
- } else if (strcmp(argv[1], "errdisable") == 0) {
- val = ddr->err_disable;
-
- if (strcmp(argv[2], "+sbe") == 0) {
- val |= ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "+mbe") == 0) {
- val |= ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "+mse") == 0) {
- val |= ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "+all") == 0) {
- val |= (ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else if (strcmp(argv[2], "-sbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_SBED;
- } else if (strcmp(argv[2], "-mbe") == 0) {
- val &= ~ECC_ERROR_DISABLE_MBED;
- } else if (strcmp(argv[2], "-mse") == 0) {
- val &= ~ECC_ERROR_DISABLE_MSED;
- } else if (strcmp(argv[2], "-all") == 0) {
- val &= ~(ECC_ERROR_DISABLE_SBED |
- ECC_ERROR_DISABLE_MBED |
- ECC_ERROR_DISABLE_MSED);
- } else {
- printf("Incorrect err_disable field\n");
- return 1;
- }
-
- ddr->err_disable = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "errdetectclr") == 0) {
- val = ddr->err_detect;
-
- if (strcmp(argv[2], "mme") == 0) {
- val |= ECC_ERROR_DETECT_MME;
- } else if (strcmp(argv[2], "sbe") == 0) {
- val |= ECC_ERROR_DETECT_SBE;
- } else if (strcmp(argv[2], "mbe") == 0) {
- val |= ECC_ERROR_DETECT_MBE;
- } else if (strcmp(argv[2], "mse") == 0) {
- val |= ECC_ERROR_DETECT_MSE;
- } else if (strcmp(argv[2], "all") == 0) {
- val |= (ECC_ERROR_DETECT_MME |
- ECC_ERROR_DETECT_MBE |
- ECC_ERROR_DETECT_SBE |
- ECC_ERROR_DETECT_MSE);
- } else {
- printf("Incorrect err_detect field\n");
- return 1;
- }
-
- ddr->err_detect = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatahi") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_hi = val;
- return 0;
- } else if (strcmp(argv[1], "injectdatalo") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
-
- ddr->data_err_inject_lo = val;
- return 0;
- } else if (strcmp(argv[1], "injectecc") == 0) {
- val = simple_strtoul(argv[2], NULL, 16);
- if (val > 0xff) {
- printf("Incorrect ECC inject mask, "
- "should be 0x00..0xff\n");
- return 1;
- }
- val |= (ddr->ecc_err_inject & ~ECC_ERR_INJECT_EEIM);
-
- ddr->ecc_err_inject = val;
- return 0;
- } else if (strcmp(argv[1], "inject") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EIEN;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EIEN;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
- return 0;
- } else if (strcmp(argv[1], "mirror") == 0) {
- val = ddr->ecc_err_inject;
-
- if (strcmp(argv[2], "en") == 0)
- val |= ECC_ERR_INJECT_EMB;
- else if (strcmp(argv[2], "dis") == 0)
- val &= ~ECC_ERR_INJECT_EMB;
- else
- printf("Incorrect command\n");
-
- ddr->ecc_err_inject = val;
- return 0;
- }
- }
- if (argc == 4) {
- if (strcmp(argv[1], "testdw") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- ppcDWstore((u32 *) i, pattern);
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* read data, this generates ECC error */
- ppcDWload((u32 *) i, ret);
- __asm__ __volatile__("sync");
-
- /* re-initialize memory, double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- if (strcmp(argv[1], "testword") == 0) {
- addr = (u64 *) simple_strtoul(argv[2], NULL, 16);
- count = simple_strtoul(argv[3], NULL, 16);
-
- if ((u32) addr % 8) {
- printf("Address not alligned on "
- "double word boundary\n");
- return 1;
- }
- disable_interrupts();
-
- for (i = addr; i < addr + count; i++) {
-
- /* enable injects */
- ddr->ecc_err_inject |= ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* write memory location injecting errors */
- *(u32 *) i = 0xfedcba98UL;
- __asm__ __volatile__("sync");
-
- /* sub double word write,
- * bus will read-modify-write,
- * generates ECC error */
- *((u32 *) i + 1) = 0x76543210UL;
- __asm__ __volatile__("sync");
-
- /* disable injects */
- ddr->ecc_err_inject &= ~ECC_ERR_INJECT_EIEN;
- __asm__ __volatile__("sync");
- __asm__ __volatile__("isync");
-
- /* re-initialize memory,
- * double word write the location again,
- * generates new ECC code this time */
- ppcDWstore((u32 *) i, writeback);
- __asm__ __volatile__("sync");
- }
- enable_interrupts();
- return 0;
- }
- }
- cmd_usage(cmdtp);
- return 1;
-}
-
-U_BOOT_CMD(ecc, 4, 0, do_ecc,
- "support for DDR ECC features",
- "status - print out status info\n"
- "ecc captureclear - clear capture regs data\n"
- "ecc sbecnt <val> - set Single-Bit Error counter\n"
- "ecc sbethr <val> - set Single-Bit Threshold\n"
- "ecc errdisable <flag> - clear/set disable Memory Error Disable, flag:\n"
- " [-|+]sbe - Single-Bit Error\n"
- " [-|+]mbe - Multiple-Bit Error\n"
- " [-|+]mse - Memory Select Error\n"
- " [-|+]all - all errors\n"
- "ecc errdetectclr <flag> - clear Memory Error Detect, flag:\n"
- " mme - Multiple Memory Errors\n"
- " sbe - Single-Bit Error\n"
- " mbe - Multiple-Bit Error\n"
- " mse - Memory Select Error\n"
- " all - all errors\n"
- "ecc injectdatahi <hi> - set Memory Data Path Error Injection Mask High\n"
- "ecc injectdatalo <lo> - set Memory Data Path Error Injection Mask Low\n"
- "ecc injectecc <ecc> - set ECC Error Injection Mask\n"
- "ecc inject <en|dis> - enable/disable error injection\n"
- "ecc mirror <en|dis> - enable/disable mirror byte\n"
- "ecc testdw <addr> <cnt> - test mem region with double word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with double word access\n"
- " - disables injects\n"
- " - reads pattern back with double word access, generates error\n"
- " - re-inits memory\n"
- "ecc testword <addr> <cnt> - test mem region with word access:\n"
- " - enables injects\n"
- " - writes pattern injecting errors with word access\n"
- " - writes pattern with word access, generates error\n"
- " - disables injects\n" " - re-inits memory");
-#endif
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
deleted file mode 100644
index daf73a6..0000000
--- a/cpu/mpc83xx/fdt.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/*
- * Copyright 2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-
-extern void ft_qe_setup(void *blob);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT) && defined(CONFIG_MPC8360)
-#include <asm/immap_qe.h>
-
-void fdt_fixup_muram (void *blob)
-{
- ulong data[2];
-
- data[0] = 0;
- data[1] = QE_MURAM_SIZE - 2 * sizeof(unsigned long);
- do_fixup_by_compat(blob, "fsl,qe-muram-data", "reg",
- data, sizeof (data), 0);
-}
-#endif
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- int spridr = immr->sysconf.spridr;
-
- /*
- * delete crypto node if not on an E-processor
- * initial revisions of the MPC834xE/6xE have the original SEC 2.0.
- * EA revisions got the SEC uprevved to 2.4 but since the default device
- * tree contains SEC 2.0 properties we uprev them here.
- */
- if (!IS_E_PROCESSOR(spridr))
- fdt_fixup_crypto_node(blob, 0);
- else if (IS_E_PROCESSOR(spridr) &&
- (SPR_FAMILY(spridr) == SPR_834X_FAMILY ||
- SPR_FAMILY(spridr) == SPR_836X_FAMILY) &&
- REVID_MAJOR(spridr) >= 2)
- fdt_fixup_crypto_node(blob, 0x0204);
-
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\
- defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
- defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
- fdt_fixup_ethernet(blob);
-#ifdef CONFIG_MPC8313
- /*
- * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
- * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
- * so if on Rev. 2 (and higher) h/w, we fix them up here
- */
- if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
- int nodeoffset, path;
- const char *prop;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
-#if defined(CONFIG_HAS_ETH0)
- prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
- if (prop) {
- u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
-
- path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
- if (prop)
- fdt_setprop(blob, path, "interrupts",
- &tmp, sizeof(tmp));
- }
-#endif
-#if defined(CONFIG_HAS_ETH1)
- prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
- if (prop) {
- u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
-
- path = fdt_path_offset(blob, prop);
- prop = fdt_getprop(blob, path, "interrupts", 0);
- if (prop)
- fdt_setprop(blob, path, "interrupts",
- &tmp, sizeof(tmp));
- }
-#endif
- }
- }
-#endif
-#endif
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", (bd->bi_busfreq / 4), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", gd->core_clk, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,soc",
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,soc",
- "clock-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,immr",
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,immr",
- "clock-frequency", bd->bi_busfreq, 1);
-#ifdef CONFIG_QE
- ft_qe_setup(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#if defined(CONFIG_BOOTCOUNT_LIMIT)
- fdt_fixup_muram (blob);
-#endif
-}
diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c
deleted file mode 100644
index faffbaf..0000000
--- a/cpu/mpc83xx/interrupts.c
+++ /dev/null
@@ -1,97 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright 2004 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <mpc83xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- ulong count;
-};
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = (gd->bus_clk / 4) / CONFIG_SYS_HZ;
-
- /* Enable e300 time base */
-
- immr->sysconf.spcr |= 0x00400000;
-
- return 0;
-}
-
-
-/*
- * Handle external interrupts
- */
-
-void external_interrupt (struct pt_regs *regs)
-{
-}
-
-
-/*
- * Install and free an interrupt handler.
- */
-
-void
-irq_install_handler (int irq, interrupt_handler_t * handler, void *arg)
-{
-}
-
-
-void irq_free_handler (int irq)
-{
-}
-
-
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-
-#if defined(CONFIG_CMD_IRQ)
-
-/* ripped this out of ppc4xx/interrupts.c */
-
-/*
- * irqinfo - print information about PCI devices
- */
-
-void
-do_irqinfo(cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
-}
-
-#endif
diff --git a/cpu/mpc83xx/nand_init.c b/cpu/mpc83xx/nand_init.c
deleted file mode 100644
index 38e141a..0000000
--- a/cpu/mpc83xx/nand_init.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * im)
-{
- int i;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
-
- /* system performance tweaking */
-
-#ifdef CONFIG_SYS_ACR_PIPE_DEP
- /* Arbiter pipeline depth */
- im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) |
- (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_ACR_RPTCNT
- /* Arbiter repeat count */
- im->arbiter.acr = (im->arbiter.acr & ~(ACR_RPTCNT)) |
- (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT);
-#endif
-
-#ifdef CONFIG_SYS_SPCR_OPT
- /* Optimize transactions between CSB and other devices */
- im->sysconf.spcr = (im->sysconf.spcr & ~SPCR_OPT) |
- (CONFIG_SYS_SPCR_OPT << SPCR_OPT_SHIFT);
-#endif
-
- /* Enable Time Base & Decrimenter (so we will have udelay()) */
- im->sysconf.spcr |= SPCR_TBEN;
-
- /* DDR control driver register */
-#ifdef CONFIG_SYS_DDRCDR
- im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR;
-#endif
- /* Output buffer impedance register */
-#ifdef CONFIG_SYS_OBIR
- im->sysconf.obir = CONFIG_SYS_OBIR;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_NAND_BR_PRELIM) \
- && defined(CONFIG_SYS_NAND_OR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWBAR_PRELIM) \
- && defined(CONFIG_SYS_NAND_LBLAWAR_PRELIM)
- im->lbus.bank[0].br = CONFIG_SYS_NAND_BR_PRELIM;
- im->lbus.bank[0].or = CONFIG_SYS_NAND_OR_PRELIM;
- im->sysconf.lblaw[0].bar = CONFIG_SYS_NAND_LBLAWBAR_PRELIM;
- im->sysconf.lblaw[0].ar = CONFIG_SYS_NAND_LBLAWAR_PRELIM;
-#else
-#error CONFIG_SYS_NAND_BR_PRELIM, CONFIG_SYS_NAND_OR_PRELIM, CONFIG_SYS_NAND_LBLAWBAR_PRELIM & CONFIG_SYS_NAND_LBLAWAR_PRELIM must be defined
-#endif
-}
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- */
-unsigned long get_tbclk(void)
-{
- return (gd->bus_clk + 3L) / 4L;
-}
-
-void puts(const char *str)
-{
- while (*str)
- putc(*str++);
-}
diff --git a/cpu/mpc83xx/pci.c b/cpu/mpc83xx/pci.c
deleted file mode 100644
index a42b230..0000000
--- a/cpu/mpc83xx/pci.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor, Inc. 2007
- *
- * Author: Scott Wood <scottwood@freescale.com>,
- * with some bits from older board-specific PCI initialization.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <fdt_support.h>
-#endif
-
-#include <asm/mpc8349_pci.h>
-
-#define MAX_BUSES 2
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static struct pci_controller pci_hose[MAX_BUSES];
-static int pci_num_buses;
-
-static void pci_init_bus(int bus, struct pci_region *reg)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile pot83xx_t *pot = immr->ios.pot;
- volatile pcictrl83xx_t *pci_ctrl = &immr->pci_ctrl[bus];
- struct pci_controller *hose = &pci_hose[bus];
- u32 dev;
- u16 reg16;
- int i;
-
- if (bus == 1)
- pot += 3;
-
- /* Setup outbound translation windows */
- for (i = 0; i < 3; i++, reg++, pot++) {
- if (reg->size == 0)
- break;
-
- hose->regions[i] = *reg;
- hose->region_count++;
-
- pot->potar = reg->bus_start >> 12;
- pot->pobar = reg->phys_start >> 12;
- pot->pocmr = ~(reg->size - 1) >> 12;
-
- if (reg->flags & PCI_REGION_IO)
- pot->pocmr |= POCMR_IO;
-#ifdef CONFIG_83XX_PCI_STREAMING
- else if (reg->flags & PCI_REGION_PREFETCH)
- pot->pocmr |= POCMR_SE;
-#endif
-
- if (bus == 1)
- pot->pocmr |= POCMR_DST;
-
- pot->pocmr |= POCMR_EN;
- }
-
- /* Point inbound translation at RAM */
- pci_ctrl->pitar1 = 0;
- pci_ctrl->pibar1 = 0;
- pci_ctrl->piebar1 = 0;
- pci_ctrl->piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |
- PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size - 1));
-
- i = hose->region_count++;
- hose->regions[i].bus_start = 0;
- hose->regions[i].phys_start = 0;
- hose->regions[i].size = gd->ram_size;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- hose->first_busno = pci_last_busno() + 1;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose, CONFIG_SYS_IMMR + 0x8300 + bus * 0x80,
- CONFIG_SYS_IMMR + 0x8304 + bus * 0x80);
-
- pci_register_hose(hose);
-
- /*
- * Write to Command register
- */
- reg16 = 0xff;
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
- pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-#ifndef CONFIG_PCISLAVE
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-
-/*
- * The caller must have already set OCCR, and the PCI_LAW BARs
- * must have been set to cover all of the requested regions.
- *
- * If fewer than three regions are requested, then the region
- * list is terminated with a region of size 0.
- */
-void mpc83xx_pci_init(int num_buses, struct pci_region **reg, int warmboot)
-{
- volatile immap_t *immr = (volatile immap_t *)CONFIG_SYS_IMMR;
- int i;
-
- if (num_buses > MAX_BUSES) {
- printf("%d PCI buses requsted, %d supported\n",
- num_buses, MAX_BUSES);
-
- num_buses = MAX_BUSES;
- }
-
- pci_num_buses = num_buses;
-
- /*
- * Release PCI RST Output signal.
- * Power on to RST high must be at least 100 ms as per PCI spec.
- * On warm boots only 1 ms is required.
- */
- udelay(warmboot ? 1000 : 100000);
-
- for (i = 0; i < num_buses; i++)
- immr->pci_ctrl[i].gcr = 1;
-
- /*
- * RST high to first config access must be at least 2^25 cycles
- * as per PCI spec. This could be cut in half if we know we're
- * running at 66MHz. This could be insufficiently long if we're
- * running the PCI bus at significantly less than 33MHz.
- */
- udelay(1020000);
-
- for (i = 0; i < num_buses; i++)
- pci_init_bus(i, reg[i]);
-}
-
-#ifdef CONFIG_PCISLAVE
-
-#define PCI_FUNCTION_CONFIG 0x44
-#define PCI_FUNCTION_CFG_LOCK 0x20
-
-/*
- * Unlock the configuration bit so that the host system can begin booting
- *
- * This should be used after you have:
- * 1) Called mpc83xx_pci_init()
- * 2) Set up your inbound translation windows to the appropriate size
- */
-void mpc83xx_pcislave_unlock(int bus)
-{
- struct pci_controller *hose = &pci_hose[bus];
- u32 dev;
- u16 reg16;
-
- /* Unlock configuration lock in PCI function configuration register */
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_FUNCTION_CONFIG, &reg16);
- reg16 &= ~(PCI_FUNCTION_CFG_LOCK);
- pci_hose_write_config_word (hose, dev, PCI_FUNCTION_CONFIG, reg16);
-
- /* The configuration bit is now unlocked, so we can scan the bus */
- hose->last_busno = pci_hose_scan(hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT)
-void ft_pci_setup(void *blob, bd_t *bd)
-{
- int nodeoffset;
- int tmp[2];
- const char *path;
-
- if (pci_num_buses < 1)
- return;
-
- nodeoffset = fdt_path_offset(blob, "/aliases");
- if (nodeoffset >= 0) {
- path = fdt_getprop(blob, nodeoffset, "pci0", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose[0].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[0].last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
-
- if (pci_num_buses < 2)
- return;
-
- path = fdt_getprop(blob, nodeoffset, "pci1", NULL);
- if (path) {
- tmp[0] = cpu_to_be32(pci_hose[1].first_busno);
- tmp[1] = cpu_to_be32(pci_hose[1].last_busno);
- do_fixup_by_path(blob, path, "bus-range",
- &tmp, sizeof(tmp), 1);
-
- tmp[0] = cpu_to_be32(gd->pci_clk);
- do_fixup_by_path(blob, path, "clock-frequency",
- &tmp, sizeof(tmp[0]), 1);
- }
- }
-}
-#endif /* CONFIG_OF_LIBFDT */
diff --git a/cpu/mpc83xx/pcie.c b/cpu/mpc83xx/pcie.c
deleted file mode 100644
index 77f8906..0000000
--- a/cpu/mpc83xx/pcie.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * Copyright (C) 2007-2009 Freescale Semiconductor, Inc.
- * Copyright (C) 2008-2009 MontaVista Software, Inc.
- *
- * Authors: Tony Li <tony.li@freescale.com>
- * Anton Vorontsov <avorontsov@ru.mvista.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <pci.h>
-#include <mpc83xx.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PCIE_MAX_BUSES 2
-
-#ifdef CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES
-
-static int mpc83xx_pcie_remap_cfg(struct pci_controller *hose, pci_dev_t dev)
-{
- int bus = PCI_BUS(dev) - hose->first_busno;
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- pex83xx_t *pex = &immr->pciexp[bus];
- struct pex_outbound_window *out_win = &pex->bridge.pex_outbound_win[0];
- u8 devfn = PCI_DEV(dev) << 3 | PCI_FUNC(dev);
- u32 dev_base = bus << 24 | devfn << 16;
-
- if (hose->indirect_type == INDIRECT_TYPE_NO_PCIE_LINK)
- return -1;
- /*
- * Workaround for the HW bug: for Type 0 configure transactions the
- * PCI-E controller does not check the device number bits and just
- * assumes that the device number bits are 0.
- */
- if (devfn & 0xf8)
- return -1;
-
- out_le32(&out_win->tarl, dev_base);
- return 0;
-}
-
-#define cfg_read(val, addr, type, op) \
- do { *val = op((type)(addr)); } while (0)
-#define cfg_write(val, addr, type, op) \
- do { op((type *)(addr), (val)); } while (0)
-
-#define cfg_read_err(val) do { *val = -1; } while (0)
-#define cfg_write_err(val) do { } while (0)
-
-#define PCIE_OP(rw, size, type, op) \
-static int pcie_##rw##_config_##size(struct pci_controller *hose, \
- pci_dev_t dev, int offset, \
- type val) \
-{ \
- int ret; \
- \
- ret = mpc83xx_pcie_remap_cfg(hose, dev); \
- if (ret) { \
- cfg_##rw##_err(val); \
- return ret; \
- } \
- cfg_##rw(val, (void *)hose->cfg_addr + offset, type, op); \
- return 0; \
-}
-
-PCIE_OP(read, byte, u8 *, in_8)
-PCIE_OP(read, word, u16 *, in_le16)
-PCIE_OP(read, dword, u32 *, in_le32)
-PCIE_OP(write, byte, u8, out_8)
-PCIE_OP(write, word, u16, out_le16)
-PCIE_OP(write, dword, u32, out_le32)
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
- u8 link)
-{
- extern void disable_addr_trans(void); /* start.S */
- static struct pci_controller pcie_hose[PCIE_MAX_BUSES];
- struct pci_controller *hose = &pcie_hose[bus];
- int i;
-
- /*
- * There are no spare BATs to remap all PCI-E windows for U-Boot, so
- * disable translations. In general, this is not great solution, and
- * that's why we don't register PCI-E hoses by default.
- */
- disable_addr_trans();
-
- for (i = 0; i < 2; i++, reg++) {
- if (reg->size == 0)
- break;
-
- hose->regions[i] = *reg;
- hose->region_count++;
- }
-
- i = hose->region_count++;
- hose->regions[i].bus_start = 0;
- hose->regions[i].phys_start = 0;
- hose->regions[i].size = gd->ram_size;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- i = hose->region_count++;
- hose->regions[i].bus_start = CONFIG_SYS_IMMR;
- hose->regions[i].phys_start = CONFIG_SYS_IMMR;
- hose->regions[i].size = 0x100000;
- hose->regions[i].flags = PCI_REGION_MEM | PCI_REGION_SYS_MEMORY;
-
- hose->first_busno = pci_last_busno() + 1;
- hose->last_busno = 0xff;
-
- if (bus == 0)
- hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE1_CFG_BASE;
- else
- hose->cfg_addr = (unsigned int *)CONFIG_SYS_PCIE2_CFG_BASE;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- if (!link)
- hose->indirect_type = INDIRECT_TYPE_NO_PCIE_LINK;
-
- pci_register_hose(hose);
-
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- /*
- * Hose scan.
- */
- hose->last_busno = pci_hose_scan(hose);
-}
-
-#else
-
-static void mpc83xx_pcie_register_hose(int bus, struct pci_region *reg,
- u8 link) {}
-
-#endif /* CONFIG_83XX_GENERIC_PCIE_REGISTER_HOSES */
-
-static void mpc83xx_pcie_init_bus(int bus, struct pci_region *reg)
-{
- immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- pex83xx_t *pex = &immr->pciexp[bus];
- struct pex_outbound_window *out_win;
- struct pex_inbound_window *in_win;
- void *hose_cfg_base;
- unsigned int ram_sz;
- unsigned int barl;
- unsigned int tar;
- u16 reg16;
- int i;
-
- /* Enable pex csb bridge inbound & outbound transactions */
- out_le32(&pex->bridge.pex_csb_ctrl,
- in_le32(&pex->bridge.pex_csb_ctrl) | PEX_CSB_CTRL_OBPIOE |
- PEX_CSB_CTRL_IBPIOE);
-
- /* Enable bridge outbound */
- out_le32(&pex->bridge.pex_csb_obctrl, PEX_CSB_OBCTRL_PIOE |
- PEX_CSB_OBCTRL_MEMWE | PEX_CSB_OBCTRL_IOWE |
- PEX_CSB_OBCTRL_CFGWE);
-
- out_win = &pex->bridge.pex_outbound_win[0];
- if (bus) {
- out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
- CONFIG_SYS_PCIE2_CFG_SIZE);
- out_le32(&out_win->bar, CONFIG_SYS_PCIE2_CFG_BASE);
- } else {
- out_le32(&out_win->ar, PEX_OWAR_EN | PEX_OWAR_TYPE_CFG |
- CONFIG_SYS_PCIE1_CFG_SIZE);
- out_le32(&out_win->bar, CONFIG_SYS_PCIE1_CFG_BASE);
- }
- out_le32(&out_win->tarl, 0);
- out_le32(&out_win->tarh, 0);
-
- for (i = 0; i < 2; i++, reg++) {
- u32 ar;
-
- if (reg->size == 0)
- break;
-
- out_win = &pex->bridge.pex_outbound_win[i + 1];
- out_le32(&out_win->bar, reg->phys_start);
- out_le32(&out_win->tarl, reg->bus_start);
- out_le32(&out_win->tarh, 0);
- ar = PEX_OWAR_EN | (reg->size & PEX_OWAR_SIZE);
- if (reg->flags & PCI_REGION_IO)
- ar |= PEX_OWAR_TYPE_IO;
- else
- ar |= PEX_OWAR_TYPE_MEM;
- out_le32(&out_win->ar, ar);
- }
-
- out_le32(&pex->bridge.pex_csb_ibctrl, PEX_CSB_IBCTRL_PIOE);
-
- ram_sz = gd->ram_size;
- barl = 0;
- tar = 0;
- i = 0;
- while (ram_sz > 0) {
- in_win = &pex->bridge.pex_inbound_win[i];
- out_le32(&in_win->barl, barl);
- out_le32(&in_win->barh, 0x0);
- out_le32(&in_win->tar, tar);
- if (ram_sz >= 0x10000000) {
- /* The maxium windows size is 256M */
- out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
- PEX_IWAR_TYPE_PF | 0x0FFFF000);
- barl += 0x10000000;
- tar += 0x10000000;
- ram_sz -= 0x10000000;
- } else {
- /* The UM is not clear here.
- * So, round up to even Mb boundary */
-
- ram_sz = ram_sz >> (20 +
- ((ram_sz & 0xFFFFF) ? 1 : 0));
- if (!(ram_sz % 2))
- ram_sz -= 1;
- out_le32(&in_win->ar, PEX_IWAR_EN | PEX_IWAR_NSOV |
- PEX_IWAR_TYPE_PF | (ram_sz << 20) | 0xFF000);
- ram_sz = 0;
- }
- i++;
- }
-
- in_win = &pex->bridge.pex_inbound_win[i];
- out_le32(&in_win->barl, CONFIG_SYS_IMMR);
- out_le32(&in_win->barh, 0);
- out_le32(&in_win->tar, CONFIG_SYS_IMMR);
- out_le32(&in_win->ar, PEX_IWAR_EN |
- PEX_IWAR_TYPE_NO_PF | PEX_IWAR_SIZE_1M);
-
- /* Enable the host virtual INTX interrupts */
- out_le32(&pex->bridge.pex_int_axi_misc_enb,
- in_le32(&pex->bridge.pex_int_axi_misc_enb) | 0x1E0);
-
- /* Hose configure header is memory-mapped */
- hose_cfg_base = (void *)pex;
-
- get_clocks();
- /* Configure the PCIE controller core clock ratio */
- out_le32(hose_cfg_base + PEX_GCLK_RATIO,
- (((bus ? gd->pciexp2_clk : gd->pciexp1_clk) / 1000000) * 16)
- / 333);
- udelay(1000000);
-
- /* Do Type 1 bridge configuration */
- out_8(hose_cfg_base + PCI_PRIMARY_BUS, 0);
- out_8(hose_cfg_base + PCI_SECONDARY_BUS, 1);
- out_8(hose_cfg_base + PCI_SUBORDINATE_BUS, 255);
-
- /*
- * Write to Command register
- */
- reg16 = in_le16(hose_cfg_base + PCI_COMMAND);
- reg16 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO |
- PCI_COMMAND_SERR | PCI_COMMAND_PARITY;
- out_le16(hose_cfg_base + PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- out_le16(hose_cfg_base + PCI_STATUS, 0xffff);
- out_8(hose_cfg_base + PCI_LATENCY_TIMER, 0x80);
- out_8(hose_cfg_base + PCI_CACHE_LINE_SIZE, 0x08);
-
- printf("PCIE%d: ", bus);
-
- reg16 = in_le16(hose_cfg_base + PCI_LTSSM);
- if (reg16 >= PCI_LTSSM_L0)
- printf("link\n");
- else
- printf("No link\n");
-
- mpc83xx_pcie_register_hose(bus, reg, reg16 >= PCI_LTSSM_L0);
-}
-
-/*
- * The caller must have already set SCCR, SERDES and the PCIE_LAW BARs
- * must have been set to cover all of the requested regions.
- */
-void mpc83xx_pcie_init(int num_buses, struct pci_region **reg, int warmboot)
-{
- int i;
-
- /*
- * Release PCI RST Output signal.
- * Power on to RST high must be at least 100 ms as per PCI spec.
- * On warm boots only 1 ms is required.
- */
- udelay(warmboot ? 1000 : 100000);
-
- for (i = 0; i < num_buses; i++)
- mpc83xx_pcie_init_bus(i, reg[i]);
-}
diff --git a/cpu/mpc83xx/qe_io.c b/cpu/mpc83xx/qe_io.c
deleted file mode 100644
index db94f00..0000000
--- a/cpu/mpc83xx/qe_io.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "common.h"
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "asm/immap_83xx.h"
-
-#define NUM_OF_PINS 32
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
-{
- u32 pin_2bit_mask;
- u32 pin_2bit_dir;
- u32 pin_2bit_assign;
- u32 pin_1bit_mask;
- u32 tmp_val;
- volatile immap_t *im = (volatile immap_t *)CONFIG_SYS_IMMR;
- volatile qepio83xx_t *par_io = (volatile qepio83xx_t *)&im->qepio;
-
- /* Caculate pin location and 2bit mask and dir */
- pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
- pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Setup the direction */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
- in_be32(&par_io->ioport[port].dir2) :
- in_be32(&par_io->ioport[port].dir1);
-
- if (pin > (NUM_OF_PINS/2) -1) {
- out_be32(&par_io->ioport[port].dir2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].dir2, pin_2bit_dir | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].dir1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].dir1, pin_2bit_dir | tmp_val);
- }
-
- /* Calculate pin location for 1bit mask */
- pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
-
- /* Setup the open drain */
- tmp_val = in_be32(&par_io->ioport[port].podr);
- if (open_drain) {
- out_be32(&par_io->ioport[port].podr, pin_1bit_mask | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].podr, ~pin_1bit_mask & tmp_val);
- }
-
- /* Setup the assignment */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
- in_be32(&par_io->ioport[port].ppar2):
- in_be32(&par_io->ioport[port].ppar1);
- pin_2bit_assign = (u32)(assign
- << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Clear and set 2 bits mask */
- if (pin > (NUM_OF_PINS/2) - 1) {
- out_be32(&par_io->ioport[port].ppar2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].ppar2, pin_2bit_assign | tmp_val);
- } else {
- out_be32(&par_io->ioport[port].ppar1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io->ioport[port].ppar1, pin_2bit_assign | tmp_val);
- }
-}
diff --git a/cpu/mpc83xx/serdes.c b/cpu/mpc83xx/serdes.c
deleted file mode 100644
index 64033fe..0000000
--- a/cpu/mpc83xx/serdes.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * Freescale SerDes initialization routine
- *
- * Copyright (C) 2007 Freescale Semicondutor, Inc.
- * Copyright (C) 2008 MontaVista Software, Inc.
- *
- * Author: Li Yang <leoli@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_serdes.h>
-
-/* SerDes registers */
-#define FSL_SRDSCR0_OFFS 0x0
-#define FSL_SRDSCR0_DPP_1V2 0x00008800
-#define FSL_SRDSCR1_OFFS 0x4
-#define FSL_SRDSCR1_PLLBW 0x00000040
-#define FSL_SRDSCR2_OFFS 0x8
-#define FSL_SRDSCR2_VDD_1V2 0x00800000
-#define FSL_SRDSCR2_SEIC_MASK 0x00001c1c
-#define FSL_SRDSCR2_SEIC_SATA 0x00001414
-#define FSL_SRDSCR2_SEIC_PEX 0x00001010
-#define FSL_SRDSCR2_SEIC_SGMII 0x00000101
-#define FSL_SRDSCR3_OFFS 0xc
-#define FSL_SRDSCR3_KFR_SATA 0x10100000
-#define FSL_SRDSCR3_KPH_SATA 0x04040000
-#define FSL_SRDSCR3_SDFM_SATA_PEX 0x01010000
-#define FSL_SRDSCR3_SDTXL_SATA 0x00000505
-#define FSL_SRDSCR4_OFFS 0x10
-#define FSL_SRDSCR4_PROT_SATA 0x00000808
-#define FSL_SRDSCR4_PROT_PEX 0x00000101
-#define FSL_SRDSCR4_PROT_SGMII 0x00000505
-#define FSL_SRDSCR4_PLANE_X2 0x01000000
-#define FSL_SRDSRSTCTL_OFFS 0x20
-#define FSL_SRDSRSTCTL_RST 0x80000000
-#define FSL_SRDSRSTCTL_SATA_RESET 0xf
-
-void fsl_setup_serdes(u32 offset, char proto, u32 rfcks, char vdd)
-{
- void *regs = (void *)CONFIG_SYS_IMMR + offset;
- u32 tmp;
-
- /* 1.0V corevdd */
- if (vdd) {
- /* DPPE/DPPA = 0 */
- tmp = in_be32(regs + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_DPP_1V2;
- out_be32(regs + FSL_SRDSCR0_OFFS, tmp);
-
- /* VDD = 0 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_VDD_1V2;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
- }
-
- /* protocol specific configuration */
- switch (proto) {
- case FSL_SERDES_PROTO_SATA:
- /* Set and clear reset bits */
- tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
- tmp |= FSL_SRDSRSTCTL_SATA_RESET;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
- udelay(1000);
- tmp &= ~FSL_SRDSRSTCTL_SATA_RESET;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_SATA;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- tmp = FSL_SRDSCR3_KFR_SATA | FSL_SRDSCR3_KPH_SATA |
- FSL_SRDSCR3_SDFM_SATA_PEX |
- FSL_SRDSCR3_SDTXL_SATA;
- out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_SATA;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- case FSL_SERDES_PROTO_PEX:
- case FSL_SERDES_PROTO_PEX_X2:
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp |= FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_PEX;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- tmp = FSL_SRDSCR3_SDFM_SATA_PEX;
- out_be32(regs + FSL_SRDSCR3_OFFS, tmp);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_PEX;
- if (proto == FSL_SERDES_PROTO_PEX_X2)
- tmp |= FSL_SRDSCR4_PLANE_X2;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- case FSL_SERDES_PROTO_SGMII:
- /* Configure SRDSCR1 */
- tmp = in_be32(regs + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_PLLBW;
- out_be32(regs + FSL_SRDSCR1_OFFS, tmp);
-
- /* Configure SRDSCR2 */
- tmp = in_be32(regs + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_SEIC_MASK;
- tmp |= FSL_SRDSCR2_SEIC_SGMII;
- out_be32(regs + FSL_SRDSCR2_OFFS, tmp);
-
- /* Configure SRDSCR3 */
- out_be32(regs + FSL_SRDSCR3_OFFS, 0);
-
- /* Configure SRDSCR4 */
- tmp = rfcks | FSL_SRDSCR4_PROT_SGMII;
- out_be32(regs + FSL_SRDSCR4_OFFS, tmp);
- break;
- default:
- return;
- }
-
- /* Do a software reset */
- tmp = in_be32(regs + FSL_SRDSRSTCTL_OFFS);
- tmp |= FSL_SRDSRSTCTL_RST;
- out_be32(regs + FSL_SRDSRSTCTL_OFFS, tmp);
-}
diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c
deleted file mode 100644
index 44aaa9a..0000000
--- a/cpu/mpc83xx/spd_sdram.c
+++ /dev/null
@@ -1,918 +0,0 @@
-/*
- * (C) Copyright 2006-2007 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2006 Freescale Semiconductor, Inc.
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <i2c.h>
-#include <spd.h>
-#include <asm/mmu.h>
-#include <spd_sdram.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_add_ram_info(int use_default)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- char buf[32];
-
- printf(" (DDR%d", ((ddr->sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK)
- >> SDRAM_CFG_SDRAM_TYPE_SHIFT) - 1);
-
- if (ddr->sdram_cfg & SDRAM_CFG_32_BE)
- puts(", 32-bit");
- else
- puts(", 64-bit");
-
- if (ddr->sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on");
- else
- puts(", ECC off");
-
- printf(", %s MHz)", strmhz(buf, gd->mem_clk));
-
-#if defined(CONFIG_SYS_LB_SDRAM) && defined(CONFIG_SYS_LBC_SDRAM_SIZE)
- puts("\nSDRAM: ");
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, " (local bus)");
-#endif
-}
-
-#ifdef CONFIG_SPD_EEPROM
-#ifndef CONFIG_SYS_READ_SPD
-#define CONFIG_SYS_READ_SPD i2c_read
-#endif
-
-/*
- * Convert picoseconds into clock cycles (rounding up if needed).
- */
-int
-picos_to_clk(int picos)
-{
- unsigned int mem_bus_clk;
- int clks;
-
- mem_bus_clk = gd->mem_clk >> 1;
- clks = picos / (1000000000 / (mem_bus_clk / 1000));
- if (picos % (1000000000 / (mem_bus_clk / 1000)) != 0)
- clks++;
-
- return clks;
-}
-
-unsigned int banksize(unsigned char row_dens)
-{
- return ((row_dens >> 2) | ((row_dens & 3) << 6)) << 24;
-}
-
-int read_spd(uint addr)
-{
- return ((int) addr);
-}
-
-#undef SPD_DEBUG
-#ifdef SPD_DEBUG
-static void spd_debug(spd_eeprom_t *spd)
-{
- printf ("\nDIMM type: %-18.18s\n", spd->mpart);
- printf ("SPD size: %d\n", spd->info_size);
- printf ("EEPROM size: %d\n", 1 << spd->chip_size);
- printf ("Memory type: %d\n", spd->mem_type);
- printf ("Row addr: %d\n", spd->nrow_addr);
- printf ("Column addr: %d\n", spd->ncol_addr);
- printf ("# of rows: %d\n", spd->nrows);
- printf ("Row density: %d\n", spd->row_dens);
- printf ("# of banks: %d\n", spd->nbanks);
- printf ("Data width: %d\n",
- 256 * spd->dataw_msb + spd->dataw_lsb);
- printf ("Chip width: %d\n", spd->primw);
- printf ("Refresh rate: %02X\n", spd->refresh);
- printf ("CAS latencies: %02X\n", spd->cas_lat);
- printf ("Write latencies: %02X\n", spd->write_lat);
- printf ("tRP: %d\n", spd->trp);
- printf ("tRCD: %d\n", spd->trcd);
- printf ("\n");
-}
-#endif /* SPD_DEBUG */
-
-long int spd_sdram()
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr = &immap->ddr;
- volatile law83xx_t *ecm = &immap->sysconf.ddrlaw[0];
- spd_eeprom_t spd;
- unsigned int n_ranks;
- unsigned int odt_rd_cfg, odt_wr_cfg;
- unsigned char twr_clk, twtr_clk;
- unsigned int sdram_type;
- unsigned int memsize;
- unsigned int law_size;
- unsigned char caslat, caslat_ctrl;
- unsigned int trfc, trfc_clk, trfc_low, trfc_high;
- unsigned int trcd_clk, trtp_clk;
- unsigned char cke_min_clk;
- unsigned char add_lat, wr_lat;
- unsigned char wr_data_delay;
- unsigned char four_act;
- unsigned char cpo;
- unsigned char burstlen;
- unsigned char odt_cfg, mode_odt_enable;
- unsigned int max_bus_clk;
- unsigned int max_data_rate, effective_data_rate;
- unsigned int ddrc_clk;
- unsigned int refresh_clk;
- unsigned int sdram_cfg;
- unsigned int ddrc_ecc_enable;
- unsigned int pvr = get_pvr();
-
- /*
- * First disable the memory controller (could be enabled
- * by the debugger)
- */
- clrsetbits_be32(&ddr->sdram_cfg, SDRAM_CFG_MEM_EN, 0);
- sync();
- isync();
-
- /* Read SPD parameters with I2C */
- CONFIG_SYS_READ_SPD(SPD_EEPROM_ADDRESS, 0, 1, (uchar *) & spd, sizeof (spd));
-#ifdef SPD_DEBUG
- spd_debug(&spd);
-#endif
- /* Check the memory type */
- if (spd.mem_type != SPD_MEMTYPE_DDR && spd.mem_type != SPD_MEMTYPE_DDR2) {
- debug("DDR: Module mem type is %02X\n", spd.mem_type);
- return 0;
- }
-
- /* Check the number of physical bank */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- n_ranks = spd.nrows;
- } else {
- n_ranks = (spd.nrows & 0x7) + 1;
- }
-
- if (n_ranks > 2) {
- printf("DDR: The number of physical bank is %02X\n", n_ranks);
- return 0;
- }
-
- /* Check if the number of row of the module is in the range of DDRC */
- if (spd.nrow_addr < 12 || spd.nrow_addr > 15) {
- printf("DDR: Row number is out of range of DDRC, row=%02X\n",
- spd.nrow_addr);
- return 0;
- }
-
- /* Check if the number of col of the module is in the range of DDRC */
- if (spd.ncol_addr < 8 || spd.ncol_addr > 11) {
- printf("DDR: Col number is out of range of DDRC, col=%02X\n",
- spd.ncol_addr);
- return 0;
- }
-
-#ifdef CONFIG_SYS_DDRCDR_VALUE
- /*
- * Adjust DDR II IO voltage biasing. It just makes it work.
- */
- if(spd.mem_type == SPD_MEMTYPE_DDR2) {
- immap->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
- }
- udelay(50000);
-#endif
-
- /*
- * ODT configuration recommendation from DDR Controller Chapter.
- */
- odt_rd_cfg = 0; /* Never assert ODT */
- odt_wr_cfg = 0; /* Never assert ODT */
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- odt_wr_cfg = 1; /* Assert ODT on writes to CSn */
- }
-
- /* Setup DDR chip select register */
-#ifdef CONFIG_SYS_83XX_DDR_USES_CS0
- ddr->csbnds[0].csbnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs_config[0] = ( 1 << 31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs0_bnds = 0x%08x\n",ddr->csbnds[0].csbnds);
- debug("cs0_config = 0x%08x\n",ddr->cs_config[0]);
-
- if (n_ranks == 2) {
- ddr->csbnds[1].csbnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs_config[1] = ( 1<<31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("cs1_bnds = 0x%08x\n",ddr->csbnds[1].csbnds);
- debug("cs1_config = 0x%08x\n",ddr->cs_config[1]);
- }
-
-#else
- ddr->csbnds[2].csbnds = (banksize(spd.row_dens) >> 24) - 1;
- ddr->cs_config[2] = ( 1 << 31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("\n");
- debug("cs2_bnds = 0x%08x\n",ddr->csbnds[2].csbnds);
- debug("cs2_config = 0x%08x\n",ddr->cs_config[2]);
-
- if (n_ranks == 2) {
- ddr->csbnds[3].csbnds = ( (banksize(spd.row_dens) >> 8)
- | ((banksize(spd.row_dens) >> 23) - 1) );
- ddr->cs_config[3] = ( 1<<31
- | (odt_rd_cfg << 20)
- | (odt_wr_cfg << 16)
- | ((spd.nbanks == 8 ? 1 : 0) << 14)
- | ((spd.nrow_addr - 12) << 8)
- | (spd.ncol_addr - 8) );
- debug("cs3_bnds = 0x%08x\n",ddr->csbnds[3].csbnds);
- debug("cs3_config = 0x%08x\n",ddr->cs_config[3]);
- }
-#endif
-
- /*
- * Figure out memory size in Megabytes.
- */
- memsize = n_ranks * banksize(spd.row_dens) / 0x100000;
-
- /*
- * First supported LAW size is 16M, at LAWAR_SIZE_16M == 23.
- */
- law_size = 19 + __ilog2(memsize);
-
- /*
- * Set up LAWBAR for all of DDR.
- */
- ecm->bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
- ecm->ar = (LAWAR_EN | LAWAR_TRGT_IF_DDR | (LAWAR_SIZE & law_size));
- debug("DDR:bar=0x%08x\n", ecm->bar);
- debug("DDR:ar=0x%08x\n", ecm->ar);
-
- /*
- * Find the largest CAS by locating the highest 1 bit
- * in the spd.cas_lat field. Translate it to a DDR
- * controller field value:
- *
- * CAS Lat DDR I DDR II Ctrl
- * Clocks SPD Bit SPD Bit Value
- * ------- ------- ------- -----
- * 1.0 0 0001
- * 1.5 1 0010
- * 2.0 2 2 0011
- * 2.5 3 0100
- * 3.0 4 3 0101
- * 3.5 5 0110
- * 4.0 6 4 0111
- * 4.5 1000
- * 5.0 5 1001
- */
- caslat = __ilog2(spd.cas_lat);
- if ((spd.mem_type == SPD_MEMTYPE_DDR)
- && (caslat > 6)) {
- printf("DDR I: Invalid SPD CAS Latency: 0x%x.\n", spd.cas_lat);
- return 0;
- } else if (spd.mem_type == SPD_MEMTYPE_DDR2
- && (caslat < 2 || caslat > 5)) {
- printf("DDR II: Invalid SPD CAS Latency: 0x%x.\n",
- spd.cas_lat);
- return 0;
- }
- debug("DDR: caslat SPD bit is %d\n", caslat);
-
- max_bus_clk = 1000 *10 / (((spd.clk_cycle & 0xF0) >> 4) * 10
- + (spd.clk_cycle & 0x0f));
- max_data_rate = max_bus_clk * 2;
-
- debug("DDR:Module maximum data rate is: %d MHz\n", max_data_rate);
-
- ddrc_clk = gd->mem_clk / 1000000;
- effective_data_rate = 0;
-
- if (max_data_rate >= 460) { /* it is DDR2-800, 667, 533 */
- if (spd.cas_lat & 0x08)
- caslat = 3;
- else
- caslat = 4;
- if (ddrc_clk <= 460 && ddrc_clk > 350)
- effective_data_rate = 400;
- else if (ddrc_clk <=350 && ddrc_clk > 280)
- effective_data_rate = 333;
- else if (ddrc_clk <= 280 && ddrc_clk > 230)
- effective_data_rate = 266;
- else
- effective_data_rate = 200;
- } else if (max_data_rate >= 390 && max_data_rate < 460) { /* it is DDR 400 */
- if (ddrc_clk <= 460 && ddrc_clk > 350) {
- /* DDR controller clk at 350~460 */
- effective_data_rate = 400; /* 5ns */
- caslat = caslat;
- } else if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- effective_data_rate = 333; /* 6ns */
- if (spd.clk_cycle2 == 0x60)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- if (spd.clk_cycle3 == 0x75)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0x75)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle3 == 0xa0)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- else
- caslat = caslat;
- }
- } else if (max_data_rate >= 323) { /* it is DDR 333 */
- if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- effective_data_rate = 333; /* 6ns */
- caslat = caslat;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- if (spd.clk_cycle2 == 0x75)
- caslat = caslat - 1;
- else
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle3 == 0xa0)
- caslat = caslat - 2;
- else if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- else
- caslat = caslat;
- }
- } else if (max_data_rate >= 256) { /* it is DDR 266 */
- if (ddrc_clk <= 350 && ddrc_clk > 280) {
- /* DDR controller clk at 280~350 */
- printf("DDR: DDR controller freq is more than "
- "max data rate of the module\n");
- return 0;
- } else if (ddrc_clk <= 280 && ddrc_clk > 230) {
- /* DDR controller clk at 230~280 */
- effective_data_rate = 266; /* 7.5ns */
- caslat = caslat;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- if (spd.clk_cycle2 == 0xa0)
- caslat = caslat - 1;
- }
- } else if (max_data_rate >= 190) { /* it is DDR 200 */
- if (ddrc_clk <= 350 && ddrc_clk > 230) {
- /* DDR controller clk at 230~350 */
- printf("DDR: DDR controller freq is more than "
- "max data rate of the module\n");
- return 0;
- } else if (ddrc_clk <= 230 && ddrc_clk > 90) {
- /* DDR controller clk at 90~230 */
- effective_data_rate = 200; /* 10ns */
- caslat = caslat;
- }
- }
-
- debug("DDR:Effective data rate is: %dMHz\n", effective_data_rate);
- debug("DDR:The MSB 1 of CAS Latency is: %d\n", caslat);
-
- /*
- * Errata DDR6 work around: input enable 2 cycles earlier.
- * including MPC834x Rev1.0/1.1 and MPC8360 Rev1.1/1.2.
- */
- if(PVR_MAJ(pvr) <= 1 && spd.mem_type == SPD_MEMTYPE_DDR){
- if (caslat == 2)
- ddr->debug_reg = 0x201c0000; /* CL=2 */
- else if (caslat == 3)
- ddr->debug_reg = 0x202c0000; /* CL=2.5 */
- else if (caslat == 4)
- ddr->debug_reg = 0x202c0000; /* CL=3.0 */
-
- __asm__ __volatile__ ("sync");
-
- debug("Errata DDR6 (debug_reg=0x%08x)\n", ddr->debug_reg);
- }
-
- /*
- * Convert caslat clocks to DDR controller value.
- * Force caslat_ctrl to be DDR Controller field-sized.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- caslat_ctrl = (caslat + 1) & 0x07;
- } else {
- caslat_ctrl = (2 * caslat - 1) & 0x0f;
- }
-
- debug("DDR: effective data rate is %d MHz\n", effective_data_rate);
- debug("DDR: caslat SPD bit is %d, controller field is 0x%x\n",
- caslat, caslat_ctrl);
-
- /*
- * Timing Config 0.
- * Avoid writing for DDR I.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- unsigned char taxpd_clk = 8; /* By the book. */
- unsigned char tmrd_clk = 2; /* By the book. */
- unsigned char act_pd_exit = 2; /* Empirical? */
- unsigned char pre_pd_exit = 6; /* Empirical? */
-
- ddr->timing_cfg_0 = (0
- | ((act_pd_exit & 0x7) << 20) /* ACT_PD_EXIT */
- | ((pre_pd_exit & 0x7) << 16) /* PRE_PD_EXIT */
- | ((taxpd_clk & 0xf) << 8) /* ODT_PD_EXIT */
- | ((tmrd_clk & 0xf) << 0) /* MRS_CYC */
- );
- debug("DDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
- }
-
- /*
- * For DDR I, WRREC(Twr) and WRTORD(Twtr) are not in SPD,
- * use conservative value.
- * For DDR II, they are bytes 36 and 37, in quarter nanos.
- */
-
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- twr_clk = 3; /* Clocks */
- twtr_clk = 1; /* Clocks */
- } else {
- twr_clk = picos_to_clk(spd.twr * 250);
- twtr_clk = picos_to_clk(spd.twtr * 250);
- if (twtr_clk < 2)
- twtr_clk = 2;
- }
-
- /*
- * Calculate Trfc, in picos.
- * DDR I: Byte 42 straight up in ns.
- * DDR II: Byte 40 and 42 swizzled some, in ns.
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- trfc = spd.trfc * 1000; /* up to ps */
- } else {
- unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0,
- 0
- };
-
- trfc = (((spd.trctrfc_ext & 0x1) * 256) + spd.trfc) * 1000
- + byte40_table_ps[(spd.trctrfc_ext >> 1) & 0x7];
- }
- trfc_clk = picos_to_clk(trfc);
-
- /*
- * Trcd, Byte 29, from quarter nanos to ps and clocks.
- */
- trcd_clk = picos_to_clk(spd.trcd * 250) & 0x7;
-
- /*
- * Convert trfc_clk to DDR controller fields. DDR I should
- * fit in the REFREC field (16-19) of TIMING_CFG_1, but the
- * 83xx controller has an extended REFREC field of three bits.
- * The controller automatically adds 8 clocks to this value,
- * so preadjust it down 8 first before splitting it up.
- */
- trfc_low = (trfc_clk - 8) & 0xf;
- trfc_high = ((trfc_clk - 8) >> 4) & 0x3;
-
- ddr->timing_cfg_1 =
- (((picos_to_clk(spd.trp * 250) & 0x07) << 28 ) | /* PRETOACT */
- ((picos_to_clk(spd.tras * 1000) & 0x0f ) << 24 ) | /* ACTTOPRE */
- (trcd_clk << 20 ) | /* ACTTORW */
- (caslat_ctrl << 16 ) | /* CASLAT */
- (trfc_low << 12 ) | /* REFEC */
- ((twr_clk & 0x07) << 8) | /* WRRREC */
- ((picos_to_clk(spd.trrd * 250) & 0x07) << 4) | /* ACTTOACT */
- ((twtr_clk & 0x07) << 0) /* WRTORD */
- );
-
- /*
- * Additive Latency
- * For DDR I, 0.
- * For DDR II, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- */
- add_lat = 0;
- if (spd.mem_type == SPD_MEMTYPE_DDR2
- && (odt_wr_cfg || odt_rd_cfg)
- && (caslat < 4)) {
- add_lat = 4 - caslat;
- if ((add_lat + caslat) < 4) {
- add_lat = 0;
- }
- }
-
- /*
- * Write Data Delay
- * Historically 0x2 == 4/8 clock delay.
- * Empirically, 0x3 == 6/8 clock delay is suggested for DDR I 266.
- */
- wr_data_delay = 2;
-
- /*
- * Write Latency
- * Read to Precharge
- * Minimum CKE Pulse Width.
- * Four Activate Window
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- /*
- * This is a lie. It should really be 1, but if it is
- * set to 1, bits overlap into the old controller's
- * otherwise unused ACSM field. If we leave it 0, then
- * the HW will magically treat it as 1 for DDR 1. Oh Yea.
- */
- wr_lat = 0;
-
- trtp_clk = 2; /* By the book. */
- cke_min_clk = 1; /* By the book. */
- four_act = 1; /* By the book. */
-
- } else {
- wr_lat = caslat - 1;
-
- /* Convert SPD value from quarter nanos to picos. */
- trtp_clk = picos_to_clk(spd.trtp * 250);
- if (trtp_clk < 2)
- trtp_clk = 2;
- trtp_clk += add_lat;
-
- cke_min_clk = 3; /* By the book. */
- four_act = picos_to_clk(37500); /* By the book. 1k pages? */
- }
-
- /*
- * Empirically set ~MCAS-to-preamble override for DDR 2.
- * Your milage will vary.
- */
- cpo = 0;
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- if (effective_data_rate == 266) {
- cpo = 0x4; /* READ_LAT + 1/2 */
- } else if (effective_data_rate == 333) {
- cpo = 0x6; /* READ_LAT + 1 */
- } else if (effective_data_rate == 400) {
- cpo = 0x7; /* READ_LAT + 5/4 */
- } else {
- /* Automatic calibration */
- cpo = 0x1f;
- }
- }
-
- ddr->timing_cfg_2 = (0
- | ((add_lat & 0x7) << 28) /* ADD_LAT */
- | ((cpo & 0x1f) << 23) /* CPO */
- | ((wr_lat & 0x7) << 19) /* WR_LAT */
- | ((trtp_clk & 0x7) << 13) /* RD_TO_PRE */
- | ((wr_data_delay & 0x7) << 10) /* WR_DATA_DELAY */
- | ((cke_min_clk & 0x7) << 6) /* CKE_PLS */
- | ((four_act & 0x1f) << 0) /* FOUR_ACT */
- );
-
- debug("DDR:timing_cfg_1=0x%08x\n", ddr->timing_cfg_1);
- debug("DDR:timing_cfg_2=0x%08x\n", ddr->timing_cfg_2);
-
- /* Check DIMM data bus width */
- if (spd.dataw_lsb < 64) {
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- burstlen = 0x03; /* 32 bit data bus, burst len is 8 */
- else
- burstlen = 0x02; /* 32 bit data bus, burst len is 4 */
- debug("\n DDR DIMM: data bus width is 32 bit");
- } else {
- burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */
- debug("\n DDR DIMM: data bus width is 64 bit");
- }
-
- /* Is this an ECC DDR chip? */
- if (spd.config == 0x02)
- debug(" with ECC\n");
- else
- debug(" without ECC\n");
-
- /* Burst length is always 4 for 64 bit data bus, 8 for 32 bit data bus,
- Burst type is sequential
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR) {
- switch (caslat) {
- case 1:
- ddr->sdram_mode = 0x50 | burstlen; /* CL=1.5 */
- break;
- case 2:
- ddr->sdram_mode = 0x20 | burstlen; /* CL=2.0 */
- break;
- case 3:
- ddr->sdram_mode = 0x60 | burstlen; /* CL=2.5 */
- break;
- case 4:
- ddr->sdram_mode = 0x30 | burstlen; /* CL=3.0 */
- break;
- default:
- printf("DDR:only CL 1.5, 2.0, 2.5, 3.0 is supported\n");
- return 0;
- }
- } else {
- mode_odt_enable = 0x0; /* Default disabled */
- if (odt_wr_cfg || odt_rd_cfg) {
- /*
- * Bits 6 and 2 in Extended MRS(1)
- * Bit 2 == 0x04 == 75 Ohm, with 2 DIMM modules.
- * Bit 6 == 0x40 == 150 Ohm, with 1 DIMM module.
- */
- mode_odt_enable = 0x40; /* 150 Ohm */
- }
-
- ddr->sdram_mode =
- (0
- | (1 << (16 + 10)) /* DQS Differential disable */
- | (add_lat << (16 + 3)) /* Additive Latency in EMRS1 */
- | (mode_odt_enable << 16) /* ODT Enable in EMRS1 */
- | ((twr_clk - 1) << 9) /* Write Recovery Autopre */
- | (caslat << 4) /* caslat */
- | (burstlen << 0) /* Burst length */
- );
- }
- debug("DDR:sdram_mode=0x%08x\n", ddr->sdram_mode);
-
- /*
- * Clear EMRS2 and EMRS3.
- */
- ddr->sdram_mode2 = 0;
- debug("DDR: sdram_mode2 = 0x%08x\n", ddr->sdram_mode2);
-
- switch (spd.refresh) {
- case 0x00:
- case 0x80:
- refresh_clk = picos_to_clk(15625000);
- break;
- case 0x01:
- case 0x81:
- refresh_clk = picos_to_clk(3900000);
- break;
- case 0x02:
- case 0x82:
- refresh_clk = picos_to_clk(7800000);
- break;
- case 0x03:
- case 0x83:
- refresh_clk = picos_to_clk(31300000);
- break;
- case 0x04:
- case 0x84:
- refresh_clk = picos_to_clk(62500000);
- break;
- case 0x05:
- case 0x85:
- refresh_clk = picos_to_clk(125000000);
- break;
- default:
- refresh_clk = 0x512;
- break;
- }
-
- /*
- * Set BSTOPRE to 0x100 for page mode
- * If auto-charge is used, set BSTOPRE = 0
- */
- ddr->sdram_interval = ((refresh_clk & 0x3fff) << 16) | 0x100;
- debug("DDR:sdram_interval=0x%08x\n", ddr->sdram_interval);
-
- /*
- * SDRAM Cfg 2
- */
- odt_cfg = 0;
-#ifndef CONFIG_NEVER_ASSERT_ODT_TO_CPU
- if (odt_rd_cfg | odt_wr_cfg) {
- odt_cfg = 0x2; /* ODT to IOs during reads */
- }
-#endif
- if (spd.mem_type == SPD_MEMTYPE_DDR2) {
- ddr->sdram_cfg2 = (0
- | (0 << 26) /* True DQS */
- | (odt_cfg << 21) /* ODT only read */
- | (1 << 12) /* 1 refresh at a time */
- );
-
- debug("DDR: sdram_cfg2 = 0x%08x\n", ddr->sdram_cfg2);
- }
-
-#ifdef CONFIG_SYS_DDR_SDRAM_CLK_CNTL /* Optional platform specific value */
- ddr->sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
-#endif
- debug("DDR:sdram_clk_cntl=0x%08x\n", ddr->sdram_clk_cntl);
-
- asm("sync;isync");
-
- udelay(600);
-
- /*
- * Figure out the settings for the sdram_cfg register. Build up
- * the value in 'sdram_cfg' before writing since the write into
- * the register will actually enable the memory controller, and all
- * settings must be done before enabling.
- *
- * sdram_cfg[0] = 1 (ddr sdram logic enable)
- * sdram_cfg[1] = 1 (self-refresh-enable)
- * sdram_cfg[5:7] = (SDRAM type = DDR SDRAM)
- * 010 DDR 1 SDRAM
- * 011 DDR 2 SDRAM
- * sdram_cfg[12] = 0 (32_BE =0 , 64 bit bus mode)
- * sdram_cfg[13] = 0 (8_BE =0, 4-beat bursts)
- */
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR1;
- else
- sdram_type = SDRAM_CFG_SDRAM_TYPE_DDR2;
-
- sdram_cfg = (0
- | SDRAM_CFG_MEM_EN /* DDR enable */
- | SDRAM_CFG_SREN /* Self refresh */
- | sdram_type /* SDRAM type */
- );
-
- /* sdram_cfg[3] = RD_EN - registered DIMM enable */
- if (spd.mod_attr & 0x02)
- sdram_cfg |= SDRAM_CFG_RD_EN;
-
- /* The DIMM is 32bit width */
- if (spd.dataw_lsb < 64) {
- if (spd.mem_type == SPD_MEMTYPE_DDR)
- sdram_cfg |= SDRAM_CFG_32_BE | SDRAM_CFG_8_BE;
- if (spd.mem_type == SPD_MEMTYPE_DDR2)
- sdram_cfg |= SDRAM_CFG_32_BE;
- }
-
- ddrc_ecc_enable = 0;
-
-#if defined(CONFIG_DDR_ECC)
- /* Enable ECC with sdram_cfg[2] */
- if (spd.config == 0x02) {
- sdram_cfg |= 0x20000000;
- ddrc_ecc_enable = 1;
- /* disable error detection */
- ddr->err_disable = ~ECC_ERROR_ENABLE;
- /* set single bit error threshold to maximum value,
- * reset counter to zero */
- ddr->err_sbe = (255 << ECC_ERROR_MAN_SBET_SHIFT) |
- (0 << ECC_ERROR_MAN_SBEC_SHIFT);
- }
-
- debug("DDR:err_disable=0x%08x\n", ddr->err_disable);
- debug("DDR:err_sbe=0x%08x\n", ddr->err_sbe);
-#endif
- debug(" DDRC ECC mode: %s\n", ddrc_ecc_enable ? "ON":"OFF");
-
-#if defined(CONFIG_DDR_2T_TIMING)
- /*
- * Enable 2T timing by setting sdram_cfg[16].
- */
- sdram_cfg |= SDRAM_CFG_2T_EN;
-#endif
- /* Enable controller, and GO! */
- ddr->sdram_cfg = sdram_cfg;
- asm("sync;isync");
- udelay(500);
-
- debug("DDR:sdram_cfg=0x%08x\n", ddr->sdram_cfg);
- return memsize; /*in MBytes*/
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Use timebase counter, get_timer() is not availabe
- * at this point of initialization yet.
- */
-static __inline__ unsigned long get_tbms (void)
-{
- unsigned long tbl;
- unsigned long tbu1, tbu2;
- unsigned long ms;
- unsigned long long tmp;
-
- ulong tbclk = get_tbclk();
-
- /* get the timebase ticks */
- do {
- asm volatile ("mftbu %0":"=r" (tbu1):);
- asm volatile ("mftb %0":"=r" (tbl):);
- asm volatile ("mftbu %0":"=r" (tbu2):);
- } while (tbu1 != tbu2);
-
- /* convert ticks to ms */
- tmp = (unsigned long long)(tbu1);
- tmp = (tmp << 32);
- tmp += (unsigned long long)(tbl);
- ms = tmp/(tbclk/1000);
-
- return ms;
-}
-
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-void ddr_enable_ecc(unsigned int dram_size)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ddr83xx_t *ddr= &immap->ddr;
- unsigned long t_start, t_end;
- register u64 *p;
- register uint size;
- unsigned int pattern[2];
-
- icache_enable();
- t_start = get_tbms();
- pattern[0] = 0xdeadbeef;
- pattern[1] = 0xdeadbeef;
-
-#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA)
- dma_meminit(pattern[0], dram_size);
-#else
- debug("ddr init: CPU FP write method\n");
- size = dram_size;
- for (p = 0; p < (u64*)(size); p++) {
- ppcDWstore((u32*)p, pattern);
- }
- __asm__ __volatile__ ("sync");
-#endif
-
- t_end = get_tbms();
- icache_disable();
-
- debug("\nREADY!!\n");
- debug("ddr init duration: %ld ms\n", t_end - t_start);
-
- /* Clear All ECC Errors */
- if ((ddr->err_detect & ECC_ERROR_DETECT_MME) == ECC_ERROR_DETECT_MME)
- ddr->err_detect |= ECC_ERROR_DETECT_MME;
- if ((ddr->err_detect & ECC_ERROR_DETECT_MBE) == ECC_ERROR_DETECT_MBE)
- ddr->err_detect |= ECC_ERROR_DETECT_MBE;
- if ((ddr->err_detect & ECC_ERROR_DETECT_SBE) == ECC_ERROR_DETECT_SBE)
- ddr->err_detect |= ECC_ERROR_DETECT_SBE;
- if ((ddr->err_detect & ECC_ERROR_DETECT_MSE) == ECC_ERROR_DETECT_MSE)
- ddr->err_detect |= ECC_ERROR_DETECT_MSE;
-
- /* Disable ECC-Interrupts */
- ddr->err_int_en &= ECC_ERR_INT_DISABLE;
-
- /* Enable errors for ECC */
- ddr->err_disable &= ECC_ERROR_ENABLE;
-
- __asm__ __volatile__ ("sync");
- __asm__ __volatile__ ("isync");
-}
-#endif /* CONFIG_DDR_ECC */
diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c
deleted file mode 100644
index bde7e92..0000000
--- a/cpu/mpc83xx/speed.c
+++ /dev/null
@@ -1,549 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc83xx.h>
-#include <command.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ----------------------------------------------------------------- */
-
-typedef enum {
- _unk,
- _off,
- _byp,
- _x8,
- _x4,
- _x2,
- _x1,
- _1x,
- _1_5x,
- _2x,
- _2_5x,
- _3x
-} mult_t;
-
-typedef struct {
- mult_t core_csb_ratio;
- mult_t vco_divider;
-} corecnf_t;
-
-corecnf_t corecnf_tab[] = {
- {_byp, _byp}, /* 0x00 */
- {_byp, _byp}, /* 0x01 */
- {_byp, _byp}, /* 0x02 */
- {_byp, _byp}, /* 0x03 */
- {_byp, _byp}, /* 0x04 */
- {_byp, _byp}, /* 0x05 */
- {_byp, _byp}, /* 0x06 */
- {_byp, _byp}, /* 0x07 */
- {_1x, _x2}, /* 0x08 */
- {_1x, _x4}, /* 0x09 */
- {_1x, _x8}, /* 0x0A */
- {_1x, _x8}, /* 0x0B */
- {_1_5x, _x2}, /* 0x0C */
- {_1_5x, _x4}, /* 0x0D */
- {_1_5x, _x8}, /* 0x0E */
- {_1_5x, _x8}, /* 0x0F */
- {_2x, _x2}, /* 0x10 */
- {_2x, _x4}, /* 0x11 */
- {_2x, _x8}, /* 0x12 */
- {_2x, _x8}, /* 0x13 */
- {_2_5x, _x2}, /* 0x14 */
- {_2_5x, _x4}, /* 0x15 */
- {_2_5x, _x8}, /* 0x16 */
- {_2_5x, _x8}, /* 0x17 */
- {_3x, _x2}, /* 0x18 */
- {_3x, _x4}, /* 0x19 */
- {_3x, _x8}, /* 0x1A */
- {_3x, _x8}, /* 0x1B */
-};
-
-/* ----------------------------------------------------------------- */
-
-/*
- *
- */
-int get_clocks(void)
-{
- volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 pci_sync_in;
- u8 spmf;
- u8 clkin_div;
- u32 sccr;
- u32 corecnf_tab_index;
- u8 corepll;
- u32 lcrr;
-
- u32 csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- u32 tsec1_clk;
- u32 tsec2_clk;
- u32 usbdr_clk;
-#endif
-#ifdef CONFIG_MPC834x
- u32 usbmph_clk;
-#endif
- u32 core_clk;
- u32 i2c1_clk;
-#if !defined(CONFIG_MPC832x)
- u32 i2c2_clk;
-#endif
-#if defined(CONFIG_MPC8315)
- u32 tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- u32 sdhc_clk;
-#endif
- u32 enc_clk;
- u32 lbiu_clk;
- u32 lclk_clk;
- u32 mem_clk;
-#if defined(CONFIG_MPC8360)
- u32 mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- u32 qepmf;
- u32 qepdf;
- u32 qe_clk;
- u32 brg_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
- u32 pciexp1_clk;
- u32 pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- u32 sata_clk;
-#endif
-
- if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
- return -1;
-
- clkin_div = ((im->clk.spmr & SPMR_CKID) >> SPMR_CKID_SHIFT);
-
- if (im->reset.rcwh & HRCWH_PCI_HOST) {
-#if defined(CONFIG_83XX_CLKIN)
- pci_sync_in = CONFIG_83XX_CLKIN / (1 + clkin_div);
-#else
- pci_sync_in = 0xDEADBEEF;
-#endif
- } else {
-#if defined(CONFIG_83XX_PCICLK)
- pci_sync_in = CONFIG_83XX_PCICLK;
-#else
- pci_sync_in = 0xDEADBEEF;
-#endif
- }
-
- spmf = ((im->reset.rcwl & HRCWL_SPMF) >> HRCWL_SPMF_SHIFT);
- csb_clk = pci_sync_in * (1 + clkin_div) * spmf;
-
- sccr = im->clk.sccr;
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- switch ((sccr & SCCR_TSEC1CM) >> SCCR_TSEC1CM_SHIFT) {
- case 0:
- tsec1_clk = 0;
- break;
- case 1:
- tsec1_clk = csb_clk;
- break;
- case 2:
- tsec1_clk = csb_clk / 2;
- break;
- case 3:
- tsec1_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TSEC1CM value */
- return -2;
- }
-
- switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
- case 0:
- usbdr_clk = 0;
- break;
- case 1:
- usbdr_clk = csb_clk;
- break;
- case 2:
- usbdr_clk = csb_clk / 2;
- break;
- case 3:
- usbdr_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_USBDRCM value */
- return -3;
- }
-#endif
-
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_TSEC2CM) >> SCCR_TSEC2CM_SHIFT) {
- case 0:
- tsec2_clk = 0;
- break;
- case 1:
- tsec2_clk = csb_clk;
- break;
- case 2:
- tsec2_clk = csb_clk / 2;
- break;
- case 3:
- tsec2_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TSEC2CM value */
- return -4;
- }
-#elif defined(CONFIG_MPC8313)
- tsec2_clk = tsec1_clk;
-
- if (!(sccr & SCCR_TSEC1ON))
- tsec1_clk = 0;
- if (!(sccr & SCCR_TSEC2ON))
- tsec2_clk = 0;
-#endif
-
-#if defined(CONFIG_MPC834x)
- switch ((sccr & SCCR_USBMPHCM) >> SCCR_USBMPHCM_SHIFT) {
- case 0:
- usbmph_clk = 0;
- break;
- case 1:
- usbmph_clk = csb_clk;
- break;
- case 2:
- usbmph_clk = csb_clk / 2;
- break;
- case 3:
- usbmph_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_USBMPHCM value */
- return -5;
- }
-
- if (usbmph_clk != 0 && usbdr_clk != 0 && usbmph_clk != usbdr_clk) {
- /* if USB MPH clock is not disabled and
- * USB DR clock is not disabled then
- * USB MPH & USB DR must have the same rate
- */
- return -6;
- }
-#endif
- switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
- case 0:
- enc_clk = 0;
- break;
- case 1:
- enc_clk = csb_clk;
- break;
- case 2:
- enc_clk = csb_clk / 2;
- break;
- case 3:
- enc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_ENCCM value */
- return -7;
- }
-
-#if defined(CONFIG_MPC837x)
- switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
- case 0:
- sdhc_clk = 0;
- break;
- case 1:
- sdhc_clk = csb_clk;
- break;
- case 2:
- sdhc_clk = csb_clk / 2;
- break;
- case 3:
- sdhc_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_SDHCCM value */
- return -8;
- }
-#endif
-#if defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_TDMCM) >> SCCR_TDMCM_SHIFT) {
- case 0:
- tdm_clk = 0;
- break;
- case 1:
- tdm_clk = csb_clk;
- break;
- case 2:
- tdm_clk = csb_clk / 2;
- break;
- case 3:
- tdm_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_TDMCM value */
- return -8;
- }
-#endif
-
-#if defined(CONFIG_MPC834x)
- i2c1_clk = tsec2_clk;
-#elif defined(CONFIG_MPC8360)
- i2c1_clk = csb_clk;
-#elif defined(CONFIG_MPC832x)
- i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC831x)
- i2c1_clk = enc_clk;
-#elif defined(CONFIG_MPC837x)
- i2c1_clk = sdhc_clk;
-#endif
-#if !defined(CONFIG_MPC832x)
- i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC831x)
- switch ((sccr & SCCR_PCIEXP1CM) >> SCCR_PCIEXP1CM_SHIFT) {
- case 0:
- pciexp1_clk = 0;
- break;
- case 1:
- pciexp1_clk = csb_clk;
- break;
- case 2:
- pciexp1_clk = csb_clk / 2;
- break;
- case 3:
- pciexp1_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_PCIEXP1CM value */
- return -9;
- }
-
- switch ((sccr & SCCR_PCIEXP2CM) >> SCCR_PCIEXP2CM_SHIFT) {
- case 0:
- pciexp2_clk = 0;
- break;
- case 1:
- pciexp2_clk = csb_clk;
- break;
- case 2:
- pciexp2_clk = csb_clk / 2;
- break;
- case 3:
- pciexp2_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_PCIEXP2CM value */
- return -10;
- }
-#endif
-
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- switch ((sccr & SCCR_SATA1CM) >> SCCR_SATA1CM_SHIFT) {
- case 0:
- sata_clk = 0;
- break;
- case 1:
- sata_clk = csb_clk;
- break;
- case 2:
- sata_clk = csb_clk / 2;
- break;
- case 3:
- sata_clk = csb_clk / 3;
- break;
- default:
- /* unkown SCCR_SATACM value */
- return -11;
- }
-#endif
-
- lbiu_clk = csb_clk *
- (1 + ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
- lcrr = (im->lbus.lcrr & LCRR_CLKDIV) >> LCRR_CLKDIV_SHIFT;
- switch (lcrr) {
- case 2:
- case 4:
- case 8:
- lclk_clk = lbiu_clk / lcrr;
- break;
- default:
- /* unknown lcrr */
- return -12;
- }
-
- mem_clk = csb_clk *
- (1 + ((im->reset.rcwl & HRCWL_DDRCM) >> HRCWL_DDRCM_SHIFT));
- corepll = (im->reset.rcwl & HRCWL_COREPLL) >> HRCWL_COREPLL_SHIFT;
-#if defined(CONFIG_MPC8360)
- mem_sec_clk = csb_clk * (1 +
- ((im->reset.rcwl & HRCWL_LBIUCM) >> HRCWL_LBIUCM_SHIFT));
-#endif
-
- corecnf_tab_index = ((corepll & 0x1F) << 2) | ((corepll & 0x60) >> 5);
- if (corecnf_tab_index > (sizeof(corecnf_tab) / sizeof(corecnf_t))) {
- /* corecnf_tab_index is too high, possibly worng value */
- return -11;
- }
- switch (corecnf_tab[corecnf_tab_index].core_csb_ratio) {
- case _byp:
- case _x1:
- case _1x:
- core_clk = csb_clk;
- break;
- case _1_5x:
- core_clk = (3 * csb_clk) / 2;
- break;
- case _2x:
- core_clk = 2 * csb_clk;
- break;
- case _2_5x:
- core_clk = (5 * csb_clk) / 2;
- break;
- case _3x:
- core_clk = 3 * csb_clk;
- break;
- default:
- /* unkown core to csb ratio */
- return -13;
- }
-
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- qepmf = (im->reset.rcwl & HRCWL_CEPMF) >> HRCWL_CEPMF_SHIFT;
- qepdf = (im->reset.rcwl & HRCWL_CEPDF) >> HRCWL_CEPDF_SHIFT;
- qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
- brg_clk = qe_clk / 2;
-#endif
-
- gd->csb_clk = csb_clk;
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- gd->tsec1_clk = tsec1_clk;
- gd->tsec2_clk = tsec2_clk;
- gd->usbdr_clk = usbdr_clk;
-#endif
-#if defined(CONFIG_MPC834x)
- gd->usbmph_clk = usbmph_clk;
-#endif
-#if defined(CONFIG_MPC8315)
- gd->tdm_clk = tdm_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- gd->sdhc_clk = sdhc_clk;
-#endif
- gd->core_clk = core_clk;
- gd->i2c1_clk = i2c1_clk;
-#if !defined(CONFIG_MPC832x)
- gd->i2c2_clk = i2c2_clk;
-#endif
- gd->enc_clk = enc_clk;
- gd->lbiu_clk = lbiu_clk;
- gd->lclk_clk = lclk_clk;
- gd->mem_clk = mem_clk;
-#if defined(CONFIG_MPC8360)
- gd->mem_sec_clk = mem_sec_clk;
-#endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- gd->qe_clk = qe_clk;
- gd->brg_clk = brg_clk;
-#endif
-#if defined(CONFIG_MPC837x)
- gd->pciexp1_clk = pciexp1_clk;
- gd->pciexp2_clk = pciexp2_clk;
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- gd->sata_clk = sata_clk;
-#endif
- gd->pci_clk = pci_sync_in;
- gd->cpu_clk = gd->core_clk;
- gd->bus_clk = gd->csb_clk;
- return 0;
-
-}
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq(ulong dummy)
-{
- return gd->csb_clk;
-}
-
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- char buf[32];
-
- printf("Clock configuration:\n");
- printf(" Core: %-4s MHz\n", strmhz(buf, gd->core_clk));
- printf(" Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
- printf(" QE: %-4s MHz\n", strmhz(buf, gd->qe_clk));
- printf(" BRG: %-4s MHz\n", strmhz(buf, gd->brg_clk));
-#endif
- printf(" Local Bus Controller:%-4s MHz\n", strmhz(buf, gd->lbiu_clk));
- printf(" Local Bus: %-4s MHz\n", strmhz(buf, gd->lclk_clk));
- printf(" DDR: %-4s MHz\n", strmhz(buf, gd->mem_clk));
-#if defined(CONFIG_MPC8360)
- printf(" DDR Secondary: %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
-#endif
- printf(" SEC: %-4s MHz\n", strmhz(buf, gd->enc_clk));
- printf(" I2C1: %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
-#if !defined(CONFIG_MPC832x)
- printf(" I2C2: %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
-#endif
-#if defined(CONFIG_MPC8315)
- printf(" TDM: %-4s MHz\n", strmhz(buf, gd->tdm_clk));
-#endif
-#if defined(CONFIG_MPC837x)
- printf(" SDHC: %-4s MHz\n", strmhz(buf, gd->sdhc_clk));
-#endif
-#if defined(CONFIG_MPC834x) || defined(CONFIG_MPC831x) || defined(CONFIG_MPC837x)
- printf(" TSEC1: %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
- printf(" TSEC2: %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
- printf(" USB DR: %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
-#endif
-#if defined(CONFIG_MPC834x)
- printf(" USB MPH: %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
-#endif
-#if defined(CONFIG_MPC837x)
- printf(" PCIEXP1: %-4s MHz\n", strmhz(buf, gd->pciexp1_clk));
- printf(" PCIEXP2: %-4s MHz\n", strmhz(buf, gd->pciexp2_clk));
-#endif
-#if defined(CONFIG_MPC837x) || defined(CONFIG_MPC8315)
- printf(" SATA: %-4s MHz\n", strmhz(buf, gd->sata_clk));
-#endif
- return 0;
-}
-
-U_BOOT_CMD(clocks, 1, 0, do_clocks,
- "print clock configuration",
- " clocks"
-);
diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S
deleted file mode 100644
index 68bb620..0000000
--- a/cpu/mpc83xx/start.S
+++ /dev/null
@@ -1,1207 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright Freescale Semiconductor, Inc. 2004, 2006, 2008.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
- */
-
-#include <config.h>
-#include <mpc83xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING "MPC83XX"
-#endif
-
-/* We don't want the MMU yet.
- */
-#undef MSR_KERNEL
-
-/*
- * Floating Point enable, Machine Check and Recoverable Interr.
- */
-#ifdef DEBUG
-#define MSR_KERNEL (MSR_FP|MSR_RI)
-#else
-#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
-#endif
-
-#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_SYS_RAMBOOT)
-#define CONFIG_SYS_FLASHBOOT
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(__bss_start)
- GOT_ENTRY(_end)
-
-#ifndef CONFIG_NAND_SPL
- GOT_ENTRY(_FIXUP_TABLE_)
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-#endif
- END_GOT
-
-/*
- * The Hard Reset Configuration Word (HRCW) table is in the first 64
- * (0x40) bytes of flash. It has 8 bytes, but each byte is repeated 8
- * times so the processor can fetch it out of flash whether the flash
- * is 8, 16, 32, or 64 bits wide (hardware trickery).
- */
- .text
-#define _HRCW_TABLE_ENTRY(w) \
- .fill 8,1,(((w)>>24)&0xff); \
- .fill 8,1,(((w)>>16)&0xff); \
- .fill 8,1,(((w)>> 8)&0xff); \
- .fill 8,1,(((w) )&0xff)
-
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_LOW)
- _HRCW_TABLE_ENTRY(CONFIG_SYS_HRCW_HIGH)
-
-/*
- * Magic number and version string - put it after the HRCW since it
- * cannot be first in flash like it is in many other processors.
- */
- .long 0x27051956 /* U-Boot Magic Number */
-
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii " ", CONFIG_IDENT_STRING, "\0"
-
- .align 2
-
- .globl enable_addr_trans
-enable_addr_trans:
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- mtmsr r5
- isync
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
- .globl ppcDWstore
-ppcDWstore:
- lfd 1, 0(r4)
- stfd 1, 0(r3)
- blr
-
- .globl ppcDWload
-ppcDWload:
- lfd 1, 0(r3)
- stfd 1, 0(r4)
- blr
-
-#ifndef CONFIG_DEFAULT_IMMR
-#error CONFIG_DEFAULT_IMMR must be defined
-#endif /* CONFIG_SYS_DEFAULT_IMMR */
-#ifndef CONFIG_SYS_IMMR
-#define CONFIG_SYS_IMMR CONFIG_DEFAULT_IMMR
-#endif /* CONFIG_SYS_IMMR */
-
-/*
- * After configuration, a system reset exception is executed using the
- * vector at offset 0x100 relative to the base set by MSR[IP]. If
- * MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
- * base address is 0xfff00000. In the case of a Power On Reset or Hard
- * Reset, the value of MSR[IP] is determined by the CIP field in the
- * HRCW.
- *
- * Other bits in the HRCW set up the Base Address and Port Size in BR0.
- * This determines the location of the boot ROM (flash or EPROM) in the
- * processor's address space at boot time. As long as the HRCW is set up
- * so that we eventually end up executing the code below when the
- * processor executes the reset exception, the actual values used should
- * not matter.
- *
- * Once we have got here, the address mask in OR0 is cleared so that the
- * bottom 32K of the boot ROM is effectively repeated all throughout the
- * processor's address space, after which we can jump to the absolute
- * address at which the boot ROM was linked at compile time, and proceed
- * to initialise the memory controller without worrying if the rug will
- * be pulled out from under us, so to speak (it will be fine as long as
- * we configure BR0 with the same boot ROM link address).
- */
- . = EXC_OFF_SYS_RESET
-
- .globl _start
-_start: /* time t 0 */
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
- nop
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-
-boot_cold: /* time t 3 */
- lis r4, CONFIG_DEFAULT_IMMR@h
- nop
-boot_warm: /* time t 5 */
- mfmsr r5 /* save msr contents */
-
- /* 83xx manuals prescribe a specific sequence for updating IMMRBAR. */
- bl 1f
-1: mflr r7
-
- lis r3, CONFIG_SYS_IMMR@h
- ori r3, r3, CONFIG_SYS_IMMR@l
-
- lwz r6, IMMRBAR(r4)
- isync
-
- stw r3, IMMRBAR(r4)
- lwz r6, 0(r7) /* Arbitrary external load */
- isync
-
- lwz r6, IMMRBAR(r3)
- isync
-
- /* Initialise the E300 processor core */
- /*------------------------------------------*/
-
-#ifdef CONFIG_NAND_SPL
- /* The FCM begins execution after only the first page
- * is loaded. Wait for the rest before branching
- * to another flash page.
- */
-1: lwz r6, 0x50b0(r3)
- andi. r6, r6, 1
- beq 1b
-#endif
-
- bl init_e300_core
-
-#ifdef CONFIG_SYS_FLASHBOOT
-
- /* Inflate flash location so it appears everywhere, calculate */
- /* the absolute address in final location of the FLASH, jump */
- /* there and deflate the flash size back to minimal size */
- /*------------------------------------------------------------*/
- bl map_flash_by_law1
- lis r4, (CONFIG_SYS_MONITOR_BASE)@h
- ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l
- addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r5
- blr
-in_flash:
-#if 1 /* Remapping flash with LAW0. */
- bl remap_flash_by_law0
-#endif
-#endif /* CONFIG_SYS_FLASHBOOT */
-
- /* setup the bats */
- bl setup_bats
- sync
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * This means:
- * 1) for the EVB, original gt regs need to be mapped
- * 2) need to have an IBAT for the 0xf region,
- * we are running there!
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- * The init-mem BAT can be reused after reloc. The old
- * gt-regs BAT can be reused after board_init_f calls
- * board_early_init_f (EVB only).
- */
- /* enable address translation */
- bl enable_addr_trans
- sync
-
- /* enable the data cache */
- bl dcache_enable
- sync
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable & stack humble */
- /*------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- lis r3, CONFIG_SYS_IMMR@h
- /* run low-level CPU init code (in Flash)*/
- bl cpu_init_f
-
- /* r3: BOOTFLAG */
- mr r3, r21
- /* run 1st part of board init code (in Flash)*/
- bl board_init_f
-
-#ifndef CONFIG_NAND_SPL
-/*
- * Vector Table
- */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
-#ifndef FIXME
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-#endif
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
-
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
-#ifdef DEBUG
- . = 0x1300
- /*
- * This exception occurs when the program counter matches the
- * Instruction Address Breakpoint Register (IABR).
- *
- * I want the cpu to halt if this occurs so I can hunt around
- * with the debugger and look at things.
- *
- * When DEBUG is defined, both machine check enable (in the MSR)
- * and checkstop reset enable (in the reset mode register) are
- * turned off and so a checkstop condition will result in the cpu
- * halting.
- *
- * I force the cpu into a checkstop condition by putting an illegal
- * instruction here (at least this is the theory).
- *
- * well - that didnt work, so just do an infinite loop!
- */
-1: b 1b
-#else
- STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
-#endif
- STD_EXCEPTION(0x1400, SMI, UnknownException)
-
- STD_EXCEPTION(0x1500, Trap_15, UnknownException)
- STD_EXCEPTION(0x1600, Trap_16, UnknownException)
- STD_EXCEPTION(0x1700, Trap_17, UnknownException)
- STD_EXCEPTION(0x1800, Trap_18, UnknownException)
- STD_EXCEPTION(0x1900, Trap_19, UnknownException)
- STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
- STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
- STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
- STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
- STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
- STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
- STD_EXCEPTION(0x2000, Trap_20, UnknownException)
- STD_EXCEPTION(0x2100, Trap_21, UnknownException)
- STD_EXCEPTION(0x2200, Trap_22, UnknownException)
- STD_EXCEPTION(0x2300, Trap_23, UnknownException)
- STD_EXCEPTION(0x2400, Trap_24, UnknownException)
- STD_EXCEPTION(0x2500, Trap_25, UnknownException)
- STD_EXCEPTION(0x2600, Trap_26, UnknownException)
- STD_EXCEPTION(0x2700, Trap_27, UnknownException)
- STD_EXCEPTION(0x2800, Trap_28, UnknownException)
- STD_EXCEPTION(0x2900, Trap_29, UnknownException)
- STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
- STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
- STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
- STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
- STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
- STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x3000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-#endif /* !CONFIG_NAND_SPL */
-
-/*
- * This code initialises the E300 processor core
- * (conforms to PowerPC 603e spec)
- * Note: expects original MSR contents to be in r5.
- */
- .globl init_e300_core
-init_e300_core: /* time t 10 */
- /* Initialize machine status; enable machine check interrupt */
- /*-----------------------------------------------------------*/
-
- li r3, MSR_KERNEL /* Set ME and RI flags */
- rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
-#ifdef DEBUG
- rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
-#endif
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
-
- lis r3, CONFIG_SYS_IMMR@h
-#if defined(CONFIG_WATCHDOG)
- /* Initialise the Wathcdog values and reset it (if req) */
- /*------------------------------------------------------*/
- lis r4, CONFIG_SYS_WATCHDOG_VALUE
- ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
- stw r4, SWCRR(r3)
-
- /* and reset it */
-
- li r4, 0x556C
- sth r4, SWSRR@l(r3)
- li r4, -0x55C7
- sth r4, SWSRR@l(r3)
-#else
- /* Disable Wathcdog */
- /*-------------------*/
- lwz r4, SWCRR(r3)
- /* Check to see if its enabled for disabling
- once disabled by SW you can't re-enable */
- andi. r4, r4, 0x4
- beq 1f
- xor r4, r4, r4
- stw r4, SWCRR(r3)
-1:
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_MASK_AER_AO)
- /* Write the Arbiter Event Enable to mask Address Only traps. */
- /* This prevents the dcbz instruction from being trapped when */
- /* HID0_ABE Address Broadcast Enable is set and the MEMORY */
- /* COHERENCY bit is set in the WIMG bits, which is often */
- /* needed for PCI operation. */
- lwz r4, 0x0808(r3)
- rlwinm r0, r4, 0, ~AER_AO
- stw r0, 0x0808(r3)
-#endif /* CONFIG_MASK_AER_AO */
-
- /* Initialize the Hardware Implementation-dependent Registers */
- /* HID0 also contains cache control */
- /* - force invalidation of data and instruction caches */
- /*------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_HID0_INIT@h
- ori r3, r3, (CONFIG_SYS_HID0_INIT | HID0_ICFI | HID0_DCFI)@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID0_FINAL@h
- ori r3, r3, (CONFIG_SYS_HID0_FINAL & ~(HID0_ICFI | HID0_DCFI))@l
- SYNC
- mtspr HID0, r3
-
- lis r3, CONFIG_SYS_HID2@h
- ori r3, r3, CONFIG_SYS_HID2@l
- SYNC
- mtspr HID2, r3
-
- /* Done! */
- /*------------------------------*/
- blr
-
- /* setup_bats - set them up to some initial state */
- .globl setup_bats
-setup_bats:
- addis r0, r0, 0x0000
-
- /* IBAT 0 */
- addis r4, r0, CONFIG_SYS_IBAT0L@h
- ori r4, r4, CONFIG_SYS_IBAT0L@l
- addis r3, r0, CONFIG_SYS_IBAT0U@h
- ori r3, r3, CONFIG_SYS_IBAT0U@l
- mtspr IBAT0L, r4
- mtspr IBAT0U, r3
-
- /* DBAT 0 */
- addis r4, r0, CONFIG_SYS_DBAT0L@h
- ori r4, r4, CONFIG_SYS_DBAT0L@l
- addis r3, r0, CONFIG_SYS_DBAT0U@h
- ori r3, r3, CONFIG_SYS_DBAT0U@l
- mtspr DBAT0L, r4
- mtspr DBAT0U, r3
-
- /* IBAT 1 */
- addis r4, r0, CONFIG_SYS_IBAT1L@h
- ori r4, r4, CONFIG_SYS_IBAT1L@l
- addis r3, r0, CONFIG_SYS_IBAT1U@h
- ori r3, r3, CONFIG_SYS_IBAT1U@l
- mtspr IBAT1L, r4
- mtspr IBAT1U, r3
-
- /* DBAT 1 */
- addis r4, r0, CONFIG_SYS_DBAT1L@h
- ori r4, r4, CONFIG_SYS_DBAT1L@l
- addis r3, r0, CONFIG_SYS_DBAT1U@h
- ori r3, r3, CONFIG_SYS_DBAT1U@l
- mtspr DBAT1L, r4
- mtspr DBAT1U, r3
-
- /* IBAT 2 */
- addis r4, r0, CONFIG_SYS_IBAT2L@h
- ori r4, r4, CONFIG_SYS_IBAT2L@l
- addis r3, r0, CONFIG_SYS_IBAT2U@h
- ori r3, r3, CONFIG_SYS_IBAT2U@l
- mtspr IBAT2L, r4
- mtspr IBAT2U, r3
-
- /* DBAT 2 */
- addis r4, r0, CONFIG_SYS_DBAT2L@h
- ori r4, r4, CONFIG_SYS_DBAT2L@l
- addis r3, r0, CONFIG_SYS_DBAT2U@h
- ori r3, r3, CONFIG_SYS_DBAT2U@l
- mtspr DBAT2L, r4
- mtspr DBAT2U, r3
-
- /* IBAT 3 */
- addis r4, r0, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- addis r3, r0, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
-
- /* DBAT 3 */
- addis r4, r0, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- addis r3, r0, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
-
-#ifdef CONFIG_HIGH_BATS
- /* IBAT 4 */
- addis r4, r0, CONFIG_SYS_IBAT4L@h
- ori r4, r4, CONFIG_SYS_IBAT4L@l
- addis r3, r0, CONFIG_SYS_IBAT4U@h
- ori r3, r3, CONFIG_SYS_IBAT4U@l
- mtspr IBAT4L, r4
- mtspr IBAT4U, r3
-
- /* DBAT 4 */
- addis r4, r0, CONFIG_SYS_DBAT4L@h
- ori r4, r4, CONFIG_SYS_DBAT4L@l
- addis r3, r0, CONFIG_SYS_DBAT4U@h
- ori r3, r3, CONFIG_SYS_DBAT4U@l
- mtspr DBAT4L, r4
- mtspr DBAT4U, r3
-
- /* IBAT 5 */
- addis r4, r0, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- addis r3, r0, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
-
- /* DBAT 5 */
- addis r4, r0, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- addis r3, r0, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
-
- /* IBAT 6 */
- addis r4, r0, CONFIG_SYS_IBAT6L@h
- ori r4, r4, CONFIG_SYS_IBAT6L@l
- addis r3, r0, CONFIG_SYS_IBAT6U@h
- ori r3, r3, CONFIG_SYS_IBAT6U@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
-
- /* DBAT 6 */
- addis r4, r0, CONFIG_SYS_DBAT6L@h
- ori r4, r4, CONFIG_SYS_DBAT6L@l
- addis r3, r0, CONFIG_SYS_DBAT6U@h
- ori r3, r3, CONFIG_SYS_DBAT6U@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
-
- /* IBAT 7 */
- addis r4, r0, CONFIG_SYS_IBAT7L@h
- ori r4, r4, CONFIG_SYS_IBAT7L@l
- addis r3, r0, CONFIG_SYS_IBAT7U@h
- ori r3, r3, CONFIG_SYS_IBAT7U@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
-
- /* DBAT 7 */
- addis r4, r0, CONFIG_SYS_DBAT7L@h
- ori r4, r4, CONFIG_SYS_DBAT7L@l
- addis r3, r0, CONFIG_SYS_DBAT7U@h
- ori r3, r3, CONFIG_SYS_DBAT7U@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
-#endif
-
- isync
-
- /* invalidate all tlb's
- *
- * From the 603e User Manual: "The 603e provides the ability to
- * invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
- * instruction invalidates the TLB entry indexed by the EA, and
- * operates on both the instruction and data TLBs simultaneously
- * invalidating four TLB entries (both sets in each TLB). The
- * index corresponds to bits 15-19 of the EA. To invalidate all
- * entries within both TLBs, 32 tlbie instructions should be
- * issued, incrementing this field by one each time."
- *
- * "Note that the tlbia instruction is not implemented on the
- * 603e."
- *
- * bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
- * incrementing by 0x1000 each time. The code below is sort of
- * based on code in "flush_tlbs" from arch/ppc/kernel/head.S
- *
- */
- lis r3, 0
- lis r5, 2
-
-1:
- tlbie r3
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt 1b
-
- blr
-
-/* Cache functions.
- *
- * Note: requires that all cache bits in
- * HID0 are in the low half word.
- */
- .globl icache_enable
-icache_enable:
- mfspr r3, HID0
- ori r3, r3, HID0_ICE
- li r4, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r4
- ori r4, r3, HID0_ICFI
- isync
- mtspr HID0, r4 /* sets enable and invalidate, clears lock */
- isync
- mtspr HID0, r3 /* clears invalidate */
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r3, HID0
- lis r4, 0
- ori r4, r4, HID0_ICE|HID0_ICFI|HID0_ILOCK
- andc r3, r3, r4
- isync
- mtspr HID0, r3 /* clears invalidate, enable and lock */
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31
- blr
-
- .globl dcache_enable
-dcache_enable:
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- ori r3, r3, HID0_DCE
- sync
- mtspr HID0, r3 /* enable, no invalidate */
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r4
- bl flush_dcache /* uses r3 and r5 */
- mfspr r3, HID0
- li r5, HID0_DCE|HID0_DLOCK
- andc r3, r3, r5
- ori r5, r3, HID0_DCFI
- sync
- mtspr HID0, r5 /* sets invalidate, clears enable and lock */
- sync
- mtspr HID0, r3 /* clears invalidate */
- mtlr r4
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, HID0
- rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31
- blr
-
- .globl flush_dcache
-flush_dcache:
- lis r3, 0
- lis r5, CONFIG_SYS_CACHELINE_SIZE
-1: cmp 0, 1, r3, r5
- bge 2f
- lwz r5, 0(r3)
- lis r5, CONFIG_SYS_CACHELINE_SIZE
- addi r3, r3, 0x4
- b 1b
-2: blr
-
-/*-------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__bss_start)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE)
- * + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* copy */
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
-
- addi r0,r5,3
- srwi. r0,r0,2
- mtctr r0
- la r8,-4(r4)
- la r7,-4(r3)
-
- /* and compare */
-20: lwzu r20,4(r8)
- lwzu r21,4(r7)
- xor. r22, r20, r21
- bne 30f
- bdnz 20b
- b 4f
-
- /* compare failed */
-30: li r3, 0
- blr
-
-2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-#endif
-
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
-#if defined(CONFIG_HYMOD)
- /*
- * For HYMOD - the environment is the very last item in flash.
- * The real .bss stops just before environment starts, so only
- * clear up to that point.
- *
- * taken from mods for FADS board
- */
- lwz r4,GOT(environment)
-#else
- lwz r4,GOT(_end)
-#endif
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mfmsr r3 /* now that the vectors have */
- lis r7, MSR_IP@h /* relocated into low memory */
- ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
- andc r3, r3, r7 /* (if it was on) */
- SYNC /* Some chip revs need this... */
- mtmsr r3
- SYNC
-
- mtlr r4 /* restore link register */
- blr
-
-#endif /* !CONFIG_NAND_SPL */
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-
- /* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, HID0_DLOCK
- sync
- mtspr HID0, r0
- sync
- blr
-
-#ifndef CONFIG_NAND_SPL
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- dcbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-
- /* Unlock the data cache and invalidate it */
- mfspr r3, HID0
- li r5, HID0_DLOCK|HID0_DCFI
- andc r3, r3, r5 /* no invalidate, unlock */
- ori r5, r3, HID0_DCFI /* invalidate, unlock */
- sync
- mtspr HID0, r5 /* invalidate, unlock */
- sync
- mtspr HID0, r3 /* no invalidate, unlock */
- blr
-#endif /* !CONFIG_NAND_SPL */
-#endif /* CONFIG_SYS_INIT_RAM_LOCK */
-
-#ifdef CONFIG_SYS_FLASHBOOT
-map_flash_by_law1:
- /* When booting from ROM (Flash or EPROM), clear the */
- /* Address Mask in OR0 so ROM appears everywhere */
- /*----------------------------------------------------*/
- lis r3, (CONFIG_SYS_IMMR)@h /* r3 <= CONFIG_SYS_IMMR */
- lwz r4, OR0@l(r3)
- li r5, 0x7fff /* r5 <= 0x00007FFFF */
- and r4, r4, r5
- stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
-
- /* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
- * system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
- * reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
- * from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
- * 0xFF800. From the hard resetting to here, the processor fetched and
- * executed the instructions one by one. There is not absolutely
- * jumping happened. Laterly, the u-boot code has to do an absolutely
- * jumping to tell the CPU instruction fetching component what the
- * u-boot TEXT base address is. Because the TEXT base resides in the
- * boot ROM memory space, to garantee the code can run smoothly after
- * that jumping, we must map in the entire boot ROM by Local Access
- * Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
- * address for boot ROM, such as 0xFE000000. In this case, the default
- * LBIU Local Access Widow 0 will not cover this memory space. So, we
- * need another window to map in it.
- */
- lis r4, (CONFIG_SYS_FLASH_BASE)@h
- ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
- stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CONFIG_SYS_FLASH_BASE */
-
- /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR1 */
- lis r4, (0x80000012)@h
- ori r4, r4, (0x80000012)@l
- li r5, CONFIG_SYS_FLASH_SIZE
-1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
- addi r4, r4, 1
- bne 1b
-
- stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
- blr
-
- /* Though all the LBIU Local Access Windows and LBC Banks will be
- * initialized in the C code, we'd better configure boot ROM's
- * window 0 and bank 0 correctly at here.
- */
-remap_flash_by_law0:
- /* Initialize the BR0 with the boot ROM starting address. */
- lwz r4, BR0(r3)
- li r5, 0x7FFF
- and r4, r4, r5
- lis r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@h
- ori r5, r5, (CONFIG_SYS_FLASH_BASE & 0xFFFF8000)@l
- or r5, r5, r4
- stw r5, BR0(r3) /* r5 <= (CONFIG_SYS_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
-
- lwz r4, OR0(r3)
- lis r5, ~((CONFIG_SYS_FLASH_SIZE << 4) - 1)
- or r4, r4, r5
- stw r4, OR0(r3)
-
- lis r4, (CONFIG_SYS_FLASH_BASE)@h
- ori r4, r4, (CONFIG_SYS_FLASH_BASE)@l
- stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CONFIG_SYS_FLASH_BASE */
-
- /* Store 0x80000012 + log2(CONFIG_SYS_FLASH_SIZE) into LBLAWAR0 */
- lis r4, (0x80000012)@h
- ori r4, r4, (0x80000012)@l
- li r5, CONFIG_SYS_FLASH_SIZE
-1: srawi. r5, r5, 1 /* r5 = r5 >> 1 */
- addi r4, r4, 1
- bne 1b
- stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= Flash Size */
-
-
- xor r4, r4, r4
- stw r4, LBLAWBAR1(r3)
- stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
- blr
-#endif /* CONFIG_SYS_FLASHBOOT */
diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c
deleted file mode 100644
index 9d71b8b..0000000
--- a/cpu/mpc83xx/traps.c
+++ /dev/null
@@ -1,266 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware
- * exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-#include <asm/mpc8349_pci.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- puts ("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- putc ('\n');
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- putc ('\n');
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- putc ('\n');
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- putc ('\n');
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-#ifdef CONFIG_PCI
-void dump_pci (void)
-{
-/*
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- printf ("PCI: err status %x err mask %x err ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_esr),
- le32_to_cpu (immap->im_pci.pci_emr),
- le32_to_cpu (immap->im_pci.pci_ecr));
- printf (" error address %x error data %x ctrl %x\n",
- le32_to_cpu (immap->im_pci.pci_eacr),
- le32_to_cpu (immap->im_pci.pci_edcr),
- le32_to_cpu (immap->im_pci.pci_eccr));
-*/
-}
-#endif
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
-#ifdef CONFIG_PCI
-#if 0
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-#ifdef DEBUG
- dump_pci();
-#endif
- /* clear the error in the error status register */
- if(immap->im_pci.pci_esr & cpu_to_le32(PCI_ERROR_PCI_NO_RSP)) {
- immap->im_pci.pci_esr = cpu_to_le32(PCI_ERROR_PCI_NO_RSP);
- return;
- }
-#endif
-#endif /* CONFIG_PCI */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- puts ("Machine check in kernel mode.\n"
- "Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- puts ("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- puts ("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- puts ("Data parity signal\n");
- break;
- case (0x80000000>>15):
- puts ("Address parity signal\n");
- break;
- default:
- puts ("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-#ifdef CONFIG_PCI
- dump_pci();
-#endif
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc83xx/u-boot.lds b/cpu/mpc83xx/u-boot.lds
deleted file mode 100644
index c84d4b0..0000000
--- a/cpu/mpc83xx/u-boot.lds
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- cpu/mpc83xx/start.o (.text)
- *(.text)
- *(.got1)
- . = ALIGN(16);
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- . = ALIGN(4);
- }
- _end = . ;
- PROVIDE (end = .);
-}
-ENTRY(_start)
diff --git a/cpu/mpc85xx/Makefile b/cpu/mpc85xx/Makefile
deleted file mode 100644
index f064fee..0000000
--- a/cpu/mpc85xx/Makefile
+++ /dev/null
@@ -1,95 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao,X.Xiao@motorola.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o resetvec.o
-SOBJS-$(CONFIG_MP) += release.o
-SOBJS = $(SOBJS-y)
-
-COBJS-$(CONFIG_CPM2) += commproc.o
-
-# supports ddr1
-COBJS-$(CONFIG_MPC8540) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8560) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8541) += ddr-gen1.o
-COBJS-$(CONFIG_MPC8555) += ddr-gen1.o
-
-# supports ddr1/2
-COBJS-$(CONFIG_MPC8548) += ddr-gen2.o
-COBJS-$(CONFIG_MPC8568) += ddr-gen2.o
-COBJS-$(CONFIG_MPC8544) += ddr-gen2.o
-
-# supports ddr1/2/3
-COBJS-$(CONFIG_MPC8572) += ddr-gen3.o
-COBJS-$(CONFIG_MPC8536) += ddr-gen3.o
-COBJS-$(CONFIG_MPC8569) += ddr-gen3.o
-COBJS-$(CONFIG_P1011) += ddr-gen3.o
-COBJS-$(CONFIG_P1012) += ddr-gen3.o
-COBJS-$(CONFIG_P1013) += ddr-gen3.o
-COBJS-$(CONFIG_P1020) += ddr-gen3.o
-COBJS-$(CONFIG_P1021) += ddr-gen3.o
-COBJS-$(CONFIG_P1022) += ddr-gen3.o
-COBJS-$(CONFIG_P2010) += ddr-gen3.o
-COBJS-$(CONFIG_P2020) += ddr-gen3.o
-COBJS-$(CONFIG_PPC_P4080) += ddr-gen3.o
-
-COBJS-$(CONFIG_CPM2) += ether_fcc.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-$(CONFIG_MP) += mp.o
-COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
-COBJS-$(CONFIG_PCI) += pci.o
-COBJS-$(CONFIG_QE) += qe_io.o
-COBJS-$(CONFIG_CPM2) += serial_scc.o
-
-COBJS = $(COBJS-y)
-COBJS += cpu.o
-COBJS += cpu_init.o
-COBJS += cpu_init_early.o
-COBJS += interrupts.o
-COBJS += speed.o
-COBJS += tlb.o
-COBJS += traps.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c
deleted file mode 100644
index 594aace..0000000
--- a/cpu/mpc85xx/commproc.c
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Adapted for Motorola MPC8560 chips
- * Xianghua Xiao <x.xiao@motorola.com>
- *
- * This file is based on "arch/ppc/8260_io/commproc.c" - here is it's
- * copyright notice:
- *
- * General Purpose functions for the global management of the
- * 8220 Communication Processor Module.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net)
- * Copyright (c) 2000 MontaVista Software, Inc (source@mvista.com)
- * 2.3.99 Updates
- * Copyright (c) 2003 Motorola,Inc.
- *
- * In addition to the individual control of the communication
- * channels, there are a few functions that globally affect the
- * communication processor.
- *
- * Buffer descriptors must be allocated from the dual ported memory
- * space. The allocator for that is here. When the communication
- * process is reset, we reclaim the memory available. There is
- * currently no deallocator for this memory.
- */
-#include <common.h>
-#include <asm/cpm_85xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * because we have stack and init data in dual port ram
- * we must reduce the size
- */
-#undef CPM_DATAONLY_SIZE
-#define CPM_DATAONLY_SIZE ((uint)(8 * 1024) - CPM_DATAONLY_BASE)
-
-void
-m8560_cpm_reset(void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ulong count;
-
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Reclaim the DP memory for our use.
- */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = gd->dp_alloc_base + CPM_DATAONLY_SIZE;
-
- /*
- * Reset CPM
- */
- cpm->im_cpm_cp.cpcr = CPM_CR_RST;
- count = 0;
- do { /* Spin until command processed */
- __asm__ __volatile__ ("eieio");
- } while ((cpm->im_cpm_cp.cpcr & CPM_CR_FLG) && ++count < 1000000);
-}
-
-/* Allocate some memory from the dual ported ram.
- * To help protocols with object alignment restrictions, we do that
- * if they ask.
- */
-uint
-m8560_cpm_dpalloc(uint size, uint align)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint retloc;
- uint align_mask, off;
- uint savebase;
-
- align_mask = align - 1;
- savebase = gd->dp_alloc_base;
-
- if ((off = (gd->dp_alloc_base & align_mask)) != 0)
- gd->dp_alloc_base += (align - off);
-
- if ((off = size & align_mask) != 0)
- size += align - off;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) {
- gd->dp_alloc_base = savebase;
- panic("m8560_cpm_dpalloc: ran out of dual port ram!");
- }
-
- retloc = gd->dp_alloc_base;
- gd->dp_alloc_base += size;
-
- memset((void *)&(cpm->im_dprambase[retloc]), 0, size);
-
- return(retloc);
-}
-
-/* We also own one page of host buffer space for the allocation of
- * UART "fifos" and the like.
- */
-uint
-m8560_cpm_hostalloc(uint size, uint align)
-{
- /* the host might not even have RAM yet - just use dual port RAM */
- return (m8560_cpm_dpalloc(size, align));
-}
-
-/* Set a baud rate generator. This needs lots of work. There are
- * eight BRGs, which can be connected to the CPM channels or output
- * as clocks. The BRGs are in two different block of internal
- * memory mapped space.
- * The baud rate clock is the system clock divided by something.
- * It was set up long ago during the initial boot phase and is
- * is given to us.
- * Baud rate clocks are zero-based in the driver code (as that maps
- * to port numbers). Documentation uses 1-based numbering.
- */
-#define BRG_INT_CLK gd->brg_clk
-#define BRG_UART_CLK ((BRG_INT_CLK + 15) / 16)
-
-/* This function is used by UARTS, or anything else that uses a 16x
- * oversampled clock.
- */
-void
-m8560_cpm_setbrg(uint brg, uint rate)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_UART_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
-}
-
-/* This function is used to set high speed synchronous baud rate
- * clocks.
- */
-void
-m8560_cpm_fastbrg(uint brg, uint rate, int div16)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- /* This is good enough to get SMCs running.....
- */
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = (((((BRG_INT_CLK+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (div16)
- *bp |= CPM_BRG_DIV16;
-}
-
-/* This function is used to set baud rate generators using an external
- * clock source and 16x oversampling.
- */
-
-void
-m8560_cpm_extcbrg(uint brg, uint rate, uint extclk, int pinsel)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile uint *bp;
-
- if (brg < 4) {
- bp = (uint *)&(cpm->im_cpm_brg1.brgc1);
- }
- else {
- bp = (uint *)&(cpm->im_cpm_brg2.brgc5);
- brg -= 4;
- }
- bp += brg;
- *bp = ((((((extclk/16)+rate-1)/rate)-1)&0xfff)<<1)|CPM_BRG_EN;
- if (pinsel == 0)
- *bp |= CPM_BRG_EXTC_CLK3_9;
- else
- *bp |= CPM_BRG_EXTC_CLK5_15;
-}
-
-#ifdef CONFIG_POST
-
-void post_word_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_IMMR + CPM_POST_WORD_ADDR);
-
- return *save_addr;
-}
-
-#endif /* CONFIG_POST */
diff --git a/cpu/mpc85xx/config.mk b/cpu/mpc85xx/config.mk
deleted file mode 100644
index 408184a..0000000
--- a/cpu/mpc85xx/config.mk
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao, X.Xiao@motorola.com
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -Wa,-me500 -msoft-float -mno-string
-
-# -mspe=yes is needed to have -mno-spe accepted by a buggy GCC;
-# see "[PATCH,rs6000] make -mno-spe work as expected" on
-# http://gcc.gnu.org/ml/gcc-patches/2008-04/msg00311.html
-PLATFORM_CPPFLAGS +=$(call cc-option,-mspe=yes)
-PLATFORM_CPPFLAGS +=$(call cc-option,-mno-spe)
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/mpc85xx/u-boot.lds
diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c
deleted file mode 100644
index 0cc6e03..0000000
--- a/cpu/mpc85xx/cpu.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Copyright 2004,2007-2009 Freescale Semiconductor, Inc.
- * (C) Copyright 2002, 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <fsl_esdhc.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int checkcpu (void)
-{
- sys_info_t sysinfo;
- uint pvr, svr;
- uint fam;
- uint ver;
- uint major, minor;
- struct cpu_type *cpu;
- char buf1[32], buf2[32];
-#ifdef CONFIG_DDR_CLK_FREQ
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
- >> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
-#else
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
-#endif
-#else
-#ifdef CONFIG_FSL_CORENET
- u32 ddr_sync = 0;
-#else
- u32 ddr_ratio = 0;
-#endif
-#endif /* CONFIG_DDR_CLK_FREQ */
- int i;
-
- svr = get_svr();
- major = SVR_MAJ(svr);
-#ifdef CONFIG_MPC8536
- major &= 0x7; /* the msb of this nibble is a mfg code */
-#endif
- minor = SVR_MIN(svr);
-
- if (cpu_numcores() > 1) {
-#ifndef CONFIG_MP
- puts("Unicore software on multiprocessor system!!\n"
- "To enable mutlticore build define CONFIG_MP\n");
-#endif
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- printf("CPU%d: ", pic->whoami);
- } else {
- puts("CPU: ");
- }
-
- cpu = gd->cpu;
-
- puts(cpu->name);
- if (IS_E_PROCESSOR(svr))
- puts("E");
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
-
- pvr = get_pvr();
- fam = PVR_FAM(pvr);
- ver = PVR_VER(pvr);
- major = PVR_MAJ(pvr);
- minor = PVR_MIN(pvr);
-
- printf("Core: ");
- switch (fam) {
- case PVR_FAM(PVR_85xx):
- puts("E500");
- break;
- default:
- puts("Unknown");
- break;
- }
-
- if (PVR_MEM(pvr) == 0x03)
- puts("MC");
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
-
- get_sys_info(&sysinfo);
-
- puts("Clock Configuration:");
- for (i = 0; i < cpu_numcores(); i++) {
- if (!(i & 3))
- printf ("\n ");
- printf("CPU%d:%-4s MHz, ",
- i,strmhz(buf1, sysinfo.freqProcessor[i]));
- }
- printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
-
-#ifdef CONFIG_FSL_CORENET
- if (ddr_sync == 1) {
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- } else {
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- }
-#else
- switch (ddr_ratio) {
- case 0x0:
- printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- case 0x7:
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- default:
- printf(" DDR:%-4s MHz (%s MT/s data rate) "
- "(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
- break;
- }
-#endif
-
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
- } else {
- printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
- }
-
-#ifdef CONFIG_CPM2
- printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
-#endif
-
-#ifdef CONFIG_QE
- printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
- printf(" FMAN%d: %s MHz\n", i,
- strmhz(buf1, sysinfo.freqFMan[i]));
- }
-#endif
-
-#ifdef CONFIG_SYS_DPAA_PME
- printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
-#endif
-
- puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, bd_t *bd, int flag, int argc, char *argv[])
-{
-/* Everything after the first generation of PQ3 parts has RSTCR */
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
- defined(CONFIG_MPC8555) || defined(CONFIG_MPC8560)
- unsigned long val, msr;
-
- /*
- * Initiate hard reset in debug control register DBCR0
- * Make sure MSR[DE] = 1. This only resets the core.
- */
- msr = mfmsr ();
- msr |= MSR_DE;
- mtmsr (msr);
-
- val = mfspr(DBCR0);
- val |= 0x70000000;
- mtspr(DBCR0,val);
-#else
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- out_be32(&gur->rstcr, 0x2); /* HRESET_REQ */
- udelay(100);
-#endif
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-#ifdef CONFIG_FSL_CORENET
- return (gd->bus_clk + 8) / 16;
-#else
- return (gd->bus_clk + 4UL)/8UL;
-#endif
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_85xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void
-reset_85xx_watchdog(void)
-{
- /*
- * Clear TSR(WIS) bit by writing 1
- */
- unsigned long val;
- val = mfspr(SPRN_TSR);
- val |= TSR_WIS;
- mtspr(SPRN_TSR, val);
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Configures a UPM. The function requires the respective MxMR to be set
- * before calling this function. "size" is the number or entries, not a sizeof.
- */
-void upmconfig (uint upm, uint * table, uint size)
-{
- int i, mdr, mad, old_mad = 0;
- volatile u32 *mxmr;
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- volatile u32 *brp,*orp;
- volatile u8* dummy = NULL;
- int upmmask;
-
- switch (upm) {
- case UPMA:
- mxmr = &lbc->mamr;
- upmmask = BR_MS_UPMA;
- break;
- case UPMB:
- mxmr = &lbc->mbmr;
- upmmask = BR_MS_UPMB;
- break;
- case UPMC:
- mxmr = &lbc->mcmr;
- upmmask = BR_MS_UPMC;
- break;
- default:
- printf("%s: Bad UPM index %d to configure\n", __FUNCTION__, upm);
- hang();
- }
-
- /* Find the address for the dummy write transaction */
- for (brp = &lbc->br0, orp = &lbc->or0, i = 0; i < 8;
- i++, brp += 2, orp += 2) {
-
- /* Look for a valid BR with selected UPM */
- if ((in_be32(brp) & (BR_V | BR_MSEL)) == (BR_V | upmmask)) {
- dummy = (volatile u8*)(in_be32(brp) & BR_BA);
- break;
- }
- }
-
- if (i == 8) {
- printf("Error: %s() could not find matching BR\n", __FUNCTION__);
- hang();
- }
-
- for (i = 0; i < size; i++) {
- /* 1 */
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_WARR | i);
- /* 2 */
- out_be32(&lbc->mdr, table[i]);
- /* 3 */
- mdr = in_be32(&lbc->mdr);
- /* 4 */
- *(volatile u8 *)dummy = 0;
- /* 5 */
- do {
- mad = in_be32(mxmr) & MxMR_MAD_MSK;
- } while (mad <= old_mad && !(!mad && i == (size-1)));
- old_mad = mad;
- }
- out_be32(mxmr, (in_be32(mxmr) & 0x4fffffc0) | MxMR_OP_NORM);
-}
-
-/*
- * Initializes on-chip MMC controllers.
- * to override, implement board_mmc_init()
- */
-int cpu_mmc_init(bd_t *bis)
-{
-#ifdef CONFIG_FSL_ESDHC
- return fsl_esdhc_mmc_init(bis);
-#else
- return 0;
-#endif
-}
diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c
deleted file mode 100644
index e0126d3..0000000
--- a/cpu/mpc85xx/cpu_init.c
+++ /dev/null
@@ -1,405 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2003 Motorola Inc.
- * Modified by Xianghua Xiao, X.Xiao@motorola.com
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <asm/processor.h>
-#include <ioports.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include "mp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_MPC8536
-extern void fsl_serdes_init(void);
-#endif
-
-#ifdef CONFIG_QE
-extern qe_iop_conf_t qe_iop_conf_tab[];
-extern void qe_config_iopin(u8 port, u8 pin, int dir,
- int open_drain, int assign);
-extern void qe_init(uint qe_base);
-extern void qe_reset(void);
-
-static void config_qe_ioports(void)
-{
- u8 port, pin;
- int dir, open_drain, assign;
- int i;
-
- for (i = 0; qe_iop_conf_tab[i].assign != QE_IOP_TAB_END; i++) {
- port = qe_iop_conf_tab[i].port;
- pin = qe_iop_conf_tab[i].pin;
- dir = qe_iop_conf_tab[i].dir;
- open_drain = qe_iop_conf_tab[i].open_drain;
- assign = qe_iop_conf_tab[i].assign;
- qe_config_iopin(port, pin, dir, open_drain, assign);
- }
-}
-#endif
-
-#ifdef CONFIG_CPM2
-void config_8560_ioports (volatile ccsr_cpm_t * cpm)
-{
- int portnum;
-
- for (portnum = 0; portnum < 4; portnum++) {
- uint pmsk = 0,
- ppar = 0,
- psor = 0,
- pdir = 0,
- podr = 0,
- pdat = 0;
- iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
- iop_conf_t *eiopc = iopc + 32;
- uint msk = 1;
-
- /*
- * NOTE:
- * index 0 refers to pin 31,
- * index 31 refers to pin 0
- */
- while (iopc < eiopc) {
- if (iopc->conf) {
- pmsk |= msk;
- if (iopc->ppar)
- ppar |= msk;
- if (iopc->psor)
- psor |= msk;
- if (iopc->pdir)
- pdir |= msk;
- if (iopc->podr)
- podr |= msk;
- if (iopc->pdat)
- pdat |= msk;
- }
-
- msk <<= 1;
- iopc++;
- }
-
- if (pmsk != 0) {
- volatile ioport_t *iop = ioport_addr (cpm, portnum);
- uint tpmsk = ~pmsk;
-
- /*
- * the (somewhat confused) paragraph at the
- * bottom of page 35-5 warns that there might
- * be "unknown behaviour" when programming
- * PSORx and PDIRx, if PPARx = 1, so I
- * decided this meant I had to disable the
- * dedicated function first, and enable it
- * last.
- */
- iop->ppar &= tpmsk;
- iop->psor = (iop->psor & tpmsk) | psor;
- iop->podr = (iop->podr & tpmsk) | podr;
- iop->pdat = (iop->pdat & tpmsk) | pdat;
- iop->pdir = (iop->pdir & tpmsk) | pdir;
- iop->ppar |= ppar;
- }
- }
-}
-#endif
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map
- * initialize a bunch of registers
- */
-
-#ifdef CONFIG_FSL_CORENET
-static void corenet_tb_init(void)
-{
- volatile ccsr_rcpm_t *rcpm =
- (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
- volatile ccsr_pic_t *pic =
- (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- u32 whoami = in_be32(&pic->whoami);
-
- /* Enable the timebase register for this core */
- out_be32(&rcpm->ctbenrl, (1 << whoami));
-}
-#endif
-
-void cpu_init_f (void)
-{
- volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- extern void m8560_cpm_reset (void);
-#ifdef CONFIG_MPC8548
- ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- uint svr = get_svr();
-
- /*
- * CPU2 errata workaround: A core hang possible while executing
- * a msync instruction and a snoopable transaction from an I/O
- * master tagged to make quick forward progress is present.
- * Fixed in silicon rev 2.1.
- */
- if ((SVR_MAJ(svr) == 1) || ((SVR_MAJ(svr) == 2 && SVR_MIN(svr) == 0x0)))
- out_be32(&ecm->eebpcr, in_be32(&ecm->eebpcr) | (1 << 16));
-#endif
-
- disable_tlb(14);
- disable_tlb(15);
-
-#ifdef CONFIG_CPM2
- config_8560_ioports((ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR);
-#endif
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- /* if cs1 is already set via debugger, leave cs0/cs1 alone */
- if (! memctl->br1 & 1) {
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
- memctl->br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
- }
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#if defined(CONFIG_CPM2)
- m8560_cpm_reset();
-#endif
-#ifdef CONFIG_QE
- /* Config QE ioports */
- config_qe_ioports();
-#endif
-#if defined(CONFIG_MPC8536)
- fsl_serdes_init();
-#endif
-#if defined(CONFIG_FSL_DMA)
- dma_init();
-#endif
-#ifdef CONFIG_FSL_CORENET
- corenet_tb_init();
-#endif
- init_used_tlb_cams();
-}
-
-
-/*
- * Initialize L2 as cache.
- *
- * The newer 8548, etc, parts have twice as much cache, but
- * use the same bit-encoding as the older 8555, etc, parts.
- *
- */
-
-int cpu_init_r(void)
-{
- puts ("L2: ");
-
-#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- volatile uint cache_ctl;
- uint svr, ver;
- uint l2srbar;
- u32 l2siz_field;
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
-
- asm("msync;isync");
- cache_ctl = l2cache->l2ctl;
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
- if (cache_ctl & MPC85xx_L2CTL_L2E) {
- /* Clear L2 SRAM memory-mapped base address */
- out_be32(&l2cache->l2srbar0, 0x0);
- out_be32(&l2cache->l2srbar1, 0x0);
-
- /* set MBECCDIS=0, SBECCDIS=0 */
- clrbits_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC |
- MPC85xx_L2ERRDIS_SBECC));
-
- /* set L2E=0, L2SRAM=0 */
- clrbits_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E |
- MPC85xx_L2CTL_L2SRAM_ENTIRE));
- }
-#endif
-
- l2siz_field = (cache_ctl >> 28) & 0x3;
-
- switch (l2siz_field) {
- case 0x0:
- printf(" unknown size (0x%08x)\n", cache_ctl);
- return -1;
- break;
- case 0x1:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
- puts("128 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
- cache_ctl = 0xc4000000;
- } else {
- puts("256 KB ");
- cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
- }
- break;
- case 0x2:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
- puts("256 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
- cache_ctl = 0xc8000000;
- } else {
- puts ("512 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
- }
- break;
- case 0x3:
- puts("1024 KB ");
- /* set L2E=1, L2I=1, & L2SRAM=0 */
- cache_ctl = 0xc0000000;
- break;
- }
-
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2E) {
- puts("already enabled");
- l2srbar = l2cache->l2srbar0;
-#ifdef CONFIG_SYS_INIT_L2_ADDR
- if (l2cache->l2ctl & MPC85xx_L2CTL_L2SRAM_ENTIRE
- && l2srbar >= CONFIG_SYS_FLASH_BASE) {
- l2srbar = CONFIG_SYS_INIT_L2_ADDR;
- l2cache->l2srbar0 = l2srbar;
- printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
- }
-#endif /* CONFIG_SYS_INIT_L2_ADDR */
- puts("\n");
- } else {
- asm("msync;isync");
- l2cache->l2ctl = cache_ctl; /* invalidate & enable */
- asm("msync;isync");
- puts("enabled\n");
- }
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
- u32 l2cfg0 = mfspr(SPRN_L2CFG0);
-
- /* invalidate the L2 cache */
- mtspr(SPRN_L2CSR0, (L2CSR0_L2FI|L2CSR0_L2LFC));
- while (mfspr(SPRN_L2CSR0) & (L2CSR0_L2FI|L2CSR0_L2LFC))
- ;
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- /* set stash id to (coreID) * 2 + 32 + L2 (1) */
- mtspr(SPRN_L2CSR1, (32 + 1));
-#endif
-
- /* enable the cache */
- mtspr(SPRN_L2CSR0, CONFIG_SYS_INIT_L2CSR0);
-
- if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
- while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
- ;
- printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
- }
-#else
- puts("disabled\n");
-#endif
-#ifdef CONFIG_QE
- uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
- qe_init(qe_base);
- qe_reset();
-#endif
-
-#if defined(CONFIG_MP)
- setup_mp();
-#endif
- return 0;
-}
-
-extern void setup_ivors(void);
-
-void arch_preboot_os(void)
-{
- u32 msr;
-
- /*
- * We are changing interrupt offsets and are about to boot the OS so
- * we need to make sure we disable all async interrupts. EE is already
- * disabled by the time we get called.
- */
- msr = mfmsr();
- msr &= ~(MSR_ME|MSR_CE|MSR_DE);
- mtmsr(msr);
-
- setup_ivors();
-}
diff --git a/cpu/mpc85xx/cpu_init_early.c b/cpu/mpc85xx/cpu_init_early.c
deleted file mode 100644
index 32aa94b..0000000
--- a/cpu/mpc85xx/cpu_init_early.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
-#ifdef CONFIG_FSL_CORENET
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
- volatile ccsr_local_t *ccm;
-
- /*
- * We can't call set_law() because we haven't moved
- * CCSR yet.
- */
- ccm = (void *)ccsr_virt;
-
- out_be32(&ccm->law[0].lawbarh,
- (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->law[0].lawbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->law[0].lawar,
- LAW_EN | (0x1e << 20) | LAW_SIZE_4K);
-
- in_be32((u32 *)(ccsr_virt + 0));
- in_be32((u32 *)(ccsr_virt + 1));
- isync();
-
- ccm = (void *)CONFIG_SYS_CCSRBAR;
- /* Now use the temporary LAW to move CCSR */
- out_be32(&ccm->ccsrbarh, (u64)CONFIG_SYS_CCSRBAR_PHYS >> 32);
- out_be32(&ccm->ccsrbarl, (u32)CONFIG_SYS_CCSRBAR_PHYS);
- out_be32(&ccm->ccsrar, CCSRAR_C);
- temp = in_be32(&ccm->ccsrar);
- disable_law(0);
-}
-#else
-static void setup_ccsrbar(void)
-{
- u32 temp;
- volatile u32 *ccsr_virt = (volatile u32 *)(CONFIG_SYS_CCSRBAR + 0x1000);
-
- temp = in_be32(ccsr_virt);
- out_be32(ccsr_virt, CONFIG_SYS_CCSRBAR_PHYS >> 12);
- temp = in_be32((volatile u32 *)CONFIG_SYS_CCSRBAR);
-}
-#endif
-#endif
-
-/* We run cpu_init_early_f in AS = 1 */
-void cpu_init_early_f(void)
-{
- u32 mas0, mas1, mas2, mas3, mas7;
- int i;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /*
- * Clear initial global data
- * we don't use memset so we can share this code with NAND_SPL
- */
- for (i = 0; i < sizeof(gd_t); i++)
- ((char *)gd)[i] = 0;
-
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(0);
- mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_4K);
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_PHYS);
-
- write_tlb(mas0, mas1, mas2, mas3, mas7);
-
- /* set up CCSR if we want it moved */
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS)
- mas0 = MAS0_TLBSEL(0) | MAS0_ESEL(1);
- /* mas1 is the same as above */
- mas2 = FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G);
- mas3 = FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, MAS3_SW|MAS3_SR);
- mas7 = FSL_BOOKE_MAS7(CONFIG_SYS_CCSRBAR_DEFAULT);
-
- write_tlb(mas0, mas1, mas2, mas3, mas7);
-
- setup_ccsrbar();
-#endif
-
- init_laws();
- invalidate_tlb(0);
- init_tlbs();
-}
diff --git a/cpu/mpc85xx/cpu_init_nand.c b/cpu/mpc85xx/cpu_init_nand.c
deleted file mode 100644
index 184cca4..0000000
--- a/cpu/mpc85xx/cpu_init_nand.c
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/io.h>
-
-void cpu_init_f(void)
-{
- ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
-
- /*
- * LCRR - Clock Ratio Register - set up local bus timing
- * when needed
- */
- out_be32(&lbc->lcrr, LCRR_DBYP | LCRR_CLKDIV_8);
-
-#if defined(CONFIG_NAND_BR_PRELIM) && defined(CONFIG_NAND_OR_PRELIM)
- out_be32(&lbc->br0, CONFIG_NAND_BR_PRELIM);
- out_be32(&lbc->or0, CONFIG_NAND_OR_PRELIM);
-#else
-#error CONFIG_NAND_BR_PRELIM, CONFIG_NAND_OR_PRELIM must be defined
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
- ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- char *l2srbar;
- int i;
-
- out_be32(&l2cache->l2srbar0, CONFIG_SYS_INIT_L2_ADDR);
-
- /* set MBECCDIS=1, SBECCDIS=1 */
- out_be32(&l2cache->l2errdis,
- (MPC85xx_L2ERRDIS_MBECC | MPC85xx_L2ERRDIS_SBECC));
-
- /* set L2E=1 & L2SRAM=001 */
- out_be32(&l2cache->l2ctl,
- (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE));
-
- /* Initialize L2 SRAM to zero */
- l2srbar = (char *)CONFIG_SYS_INIT_L2_ADDR;
- for (i = 0; i < CONFIG_SYS_L2_SIZE; i++)
- l2srbar[i] = 0;
-#endif
-}
diff --git a/cpu/mpc85xx/ddr-gen1.c b/cpu/mpc85xx/ddr-gen1.c
deleted file mode 100644
index 54437dd..0000000
--- a/cpu/mpc85xx/ddr-gen1.c
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-
- if (ctrl_num != 0) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
-#if defined(CONFIG_MPC8555) || defined(CONFIG_MPC8541)
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
-#endif
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- asm("sync;isync;msync");
- udelay(500);
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-/*
- * Initialize all of memory for ECC, then enable errors.
- */
-
-void
-ddr_enable_ecc(unsigned int dram_size)
-{
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
- dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
-
- /*
- * Enable errors for ECC.
- */
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
- ddr->err_disable = 0x00000000;
- asm("sync;isync;msync");
- debug("DMA DDR: err_disable = 0x%08x\n", ddr->err_disable);
-}
-
-#endif /* CONFIG_DDR_ECC && ! CONFIG_ECC_INIT_VIA_DDRCONTROLLER */
diff --git a/cpu/mpc85xx/ddr-gen2.c b/cpu/mpc85xx/ddr-gen2.c
deleted file mode 100644
index 655f99c..0000000
--- a/cpu/mpc85xx/ddr-gen2.c
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-
- if (ctrl_num) {
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/cpu/mpc85xx/ddr-gen3.c b/cpu/mpc85xx/ddr-gen3.c
deleted file mode 100644
index 0691ca4..0000000
--- a/cpu/mpc85xx/ddr-gen3.c
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr;
- u32 temp_sdram_cfg;
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
- break;
- case 1:
- ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
- break;
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
- out_be32(&ddr->cs0_config_2, regs->cs[i].config_2);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
- out_be32(&ddr->cs1_config_2, regs->cs[i].config_2);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
- out_be32(&ddr->cs2_config_2, regs->cs[i].config_2);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- out_be32(&ddr->cs3_config_2, regs->cs[i].config_2);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_md_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- out_be32(&ddr->timing_cfg_4, regs->timing_cfg_4);
- out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
- out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
- out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
- out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
- out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
- out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
-
- /* Set, but do not enable the memory */
- temp_sdram_cfg = regs->ddr_sdram_cfg;
- temp_sdram_cfg &= ~(SDRAM_CFG_MEM_EN);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg);
- /*
- * For 8572 DDR1 erratum - DDR controller may enter illegal state
- * when operatiing in 32-bit bus mode with 4-beat bursts,
- * This erratum does not affect DDR3 mode, only for DDR2 mode.
- */
-#ifdef CONFIG_MPC8572
- if ((((in_be32(&ddr->sdram_cfg) >> 24) & 0x7) == SDRAM_TYPE_DDR2)
- && in_be32(&ddr->sdram_cfg) & 0x80000) {
- /* set DEBUG_1[31] */
- u32 temp = in_be32(&ddr->debug_1);
- out_be32(&ddr->debug_1, temp | 1);
- }
-#endif
-
- /*
- * 500 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- * DDR2 need 200 us, and DDR3 need 500 us from spec,
- * we choose the max, that is 500 us for all of case.
- */
- udelay(500);
- asm volatile("sync;isync");
-
- /* Let the controller go */
- temp_sdram_cfg = in_be32(&ddr->sdram_cfg);
- out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
-
- /* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done. */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/cpu/mpc85xx/ether_fcc.c b/cpu/mpc85xx/ether_fcc.c
deleted file mode 100644
index 5f1414d..0000000
--- a/cpu/mpc85xx/ether_fcc.c
+++ /dev/null
@@ -1,469 +0,0 @@
-/*
- * MPC8560 FCC Fast Ethernet
- * Copyright (c) 2003 Motorola,Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net)
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8560 FCC Fast Ethernet
- * Basic ET HW initialization and packet RX/TX routines
- *
- * This code will not perform the IO port configuration. This should be
- * done in the iop_conf_t structure specific for the board.
- *
- * TODO:
- * add a PHY driver to do the negotiation
- * reflect negotiation results in FPSMR
- * look for ways to configure the board specific stuff elsewhere, eg.
- * config_xxx.h or the board directory
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <asm/cpm_85xx.h>
-#include <command.h>
-#include <config.h>
-#include <net.h>
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-#endif
-
-#if defined(CONFIG_ETHER_ON_FCC) && defined(CONFIG_CMD_NET) && \
- defined(CONFIG_NET_MULTI)
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int proff_enet;
- ulong cpm_cr_enet_sblock;
- ulong cpm_cr_enet_page;
- ulong cmxfcr_mask;
- ulong cmxfcr_value;
-}
- ether_fcc_info[] =
-{
-#ifdef CONFIG_ETHER_ON_FCC1
-{
- 0,
- PROFF_FCC1,
- CPM_CR_FCC1_SBLOCK,
- CPM_CR_FCC1_PAGE,
- CONFIG_SYS_CMXFCR_MASK1,
- CONFIG_SYS_CMXFCR_VALUE1
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC2
-{
- 1,
- PROFF_FCC2,
- CPM_CR_FCC2_SBLOCK,
- CPM_CR_FCC2_PAGE,
- CONFIG_SYS_CMXFCR_MASK2,
- CONFIG_SYS_CMXFCR_VALUE2
-},
-#endif
-
-#ifdef CONFIG_ETHER_ON_FCC3
-{
- 2,
- PROFF_FCC3,
- CPM_CR_FCC3_SBLOCK,
- CPM_CR_FCC3_PAGE,
- CONFIG_SYS_CMXFCR_MASK3,
- CONFIG_SYS_CMXFCR_VALUE3
-},
-#endif
-};
-
-/*---------------------------------------------------------------------*/
-
-/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */
-#define PKT_MAXDMA_SIZE 1520
-
-/* The FCC stores dest/src/type, data, and checksum for receive packets. */
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-
-/* Maximum input buffer size. Must be a multiple of 32. */
-#define PKT_MAXBLR_SIZE 1536
-
-#define TOUT_LOOP 1000000
-
-#define TX_BUF_CNT 2
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FCC Ethernet Tx and Rx buffer descriptors.
- * Provide for Double Buffering
- * Note: PKTBUFSRX is defined in net.h
- */
-
-typedef volatile struct rtxbd {
- cbd_t rxbd[PKTBUFSRX];
- cbd_t txbd[TX_BUF_CNT];
-} RTXBD;
-
-/* Good news: the FCC supports external BDs! */
-#ifdef __GNUC__
-static RTXBD rtx __attribute__ ((aligned(8)));
-#else
-#error "rtx must be 64-bit aligned"
-#endif
-
-#undef ET_DEBUG
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i = 0;
- int result = 0;
-
- if (length <= 0) {
- printf("fec: bad packet size: %d\n", length);
- goto out;
- }
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("fec: tx buffer not ready\n");
- goto out;
- }
- }
-
- rtx.txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx.txbd[txIdx].cbd_datlen = length;
- rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | \
- BD_ENET_TX_TC | BD_ENET_TX_PAD);
-
- for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) {
- if (i >= TOUT_LOOP) {
- printf("fec: tx error\n");
- goto out;
- }
- }
-
-#ifdef ET_DEBUG
- printf("cycles: 0x%x txIdx=0x%04x status: 0x%04x\n", i, txIdx,rtx.txbd[txIdx].cbd_sc);
- printf("packets at 0x%08x, length_in_bytes=0x%x\n",(uint)packet,length);
- for(i=0;i<(length/16 + 1);i++) {
- printf("%08x %08x %08x %08x\n",*((uint *)rtx.txbd[txIdx].cbd_bufaddr+i*4),\
- *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 1),*((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 2), \
- *((uint *)rtx.txbd[txIdx].cbd_bufaddr + i*4 + 3));
- }
-#endif
-
- /* return only status bits */
- result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS;
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
-out:
- return result;
-}
-
-static int fec_recv(struct eth_device* dev)
-{
- int length;
-
- for (;;)
- {
- if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
- length = rtx.rxbd[rxIdx].cbd_datlen;
-
- if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) {
- printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc);
- }
- else {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the FCC. */
- rtx.rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- }
- else {
- rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-
-static int fec_init(struct eth_device* dev, bd_t *bis)
-{
- struct ether_fcc_info_s * info = dev->priv;
- int i;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
- fcc_enet_t *pram_ptr;
- unsigned long mem_addr;
-
-#if 0
- mii_discover_phy();
-#endif
-
- /* 28.9 - (1-2): ioports have been set up already */
-
- /* 28.9 - (3): connect FCC's tx and rx clocks */
- cpm->im_cpm_mux.cmxuar = 0; /* ATM */
- cpm->im_cpm_mux.cmxfcr = (cpm->im_cpm_mux.cmxfcr & ~info->cmxfcr_mask) |
- info->cmxfcr_value;
-
- /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, set Mode Ethernet */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr = FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32;
- }
-
- /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet,MII */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- } else if (info->ether_index == 1){
- cpm->im_cpm_fcc2.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- } else if (info->ether_index == 2){
- cpm->im_cpm_fcc3.fpsmr = CONFIG_SYS_FCC_PSMR | FCC_PSMR_ENCRC;
- }
-
- /* 28.9 - (6): FDSR: Ethernet Syn */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fdsr = 0xD555;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.fdsr = 0xD555;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.fdsr = 0xD555;
- }
-
- /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */
- rxIdx = 0;
- txIdx = 0;
-
- /* Setup Receiver Buffer Descriptors */
- for (i = 0; i < PKTBUFSRX; i++)
- {
- rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx.rxbd[i].cbd_datlen = 0;
- rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i];
- }
- rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /* Setup Ethernet Transmitter Buffer Descriptors */
- for (i = 0; i < TX_BUF_CNT; i++)
- {
- rtx.txbd[i].cbd_sc = 0;
- rtx.txbd[i].cbd_datlen = 0;
- rtx.txbd[i].cbd_bufaddr = 0;
- }
- rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* 28.9 - (7): initialize parameter ram */
- pram_ptr = (fcc_enet_t *)&(cpm->im_dprambase[info->proff_enet]);
-
- /* clear whole structure to make sure all reserved fields are zero */
- memset((void*)pram_ptr, 0, sizeof(fcc_enet_t));
-
- /*
- * common Parameter RAM area
- *
- * Allocate space in the reserved FCC area of DPRAM for the
- * internal buffers. No one uses this space (yet), so we
- * can do this. Later, we will add resource management for
- * this area.
- * CPM_FCC_SPECIAL_BASE: 0xB000 for MPC8540, MPC8560
- * 0x9000 for MPC8541, MPC8555
- */
- mem_addr = CPM_FCC_SPECIAL_BASE + ((info->ether_index) * 64);
- pram_ptr->fen_genfcc.fcc_riptr = mem_addr;
- pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32;
- /*
- * Set maximum bytes per receive buffer.
- * It must be a multiple of 32.
- */
- pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; /* 1536 */
- /* localbus SDRAM should be preferred */
- pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]);
- pram_ptr->fen_genfcc.fcc_rbdstat = 0;
- pram_ptr->fen_genfcc.fcc_rbdlen = 0;
- pram_ptr->fen_genfcc.fcc_rdptr = 0;
- /* localbus SDRAM should be preferred */
- pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB |
- CONFIG_SYS_CPMFCR_RAMTYPE) << 24;
- pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]);
- pram_ptr->fen_genfcc.fcc_tbdstat = 0;
- pram_ptr->fen_genfcc.fcc_tbdlen = 0;
- pram_ptr->fen_genfcc.fcc_tdptr = 0;
-
- /* protocol-specific area */
- pram_ptr->fen_statbuf = 0x0;
- pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */
- pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */
- pram_ptr->fen_crcec = 0;
- pram_ptr->fen_alec = 0;
- pram_ptr->fen_disfc = 0;
- pram_ptr->fen_retlim = 15; /* Retry limit threshold */
- pram_ptr->fen_retcnt = 0;
- pram_ptr->fen_pper = 0;
- pram_ptr->fen_boffcnt = 0;
- pram_ptr->fen_gaddrh = 0;
- pram_ptr->fen_gaddrl = 0;
- pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
- /*
- * Set Ethernet station address.
- *
- * This is supplied in the board information structure, so we
- * copy that into the controller.
- * So far we have only been given one Ethernet address. We make
- * it unique by setting a few bits in the upper byte of the
- * non-static part of the address.
- */
-#define ea eth_get_dev()->enetaddr
- pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
- pram_ptr->fen_ibdcount = 0;
- pram_ptr->fen_ibdstart = 0;
- pram_ptr->fen_ibdend = 0;
- pram_ptr->fen_txlen = 0;
- pram_ptr->fen_iaddrh = 0; /* disable hash */
- pram_ptr->fen_iaddrl = 0;
- pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register: 64 */
- /* pad pointer. use tiptr since we don't need a specific padding char */
- pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr;
- pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length:1520 */
- pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length:1520 */
-
-#if defined(ET_DEBUG)
- printf("parm_ptr(0xff788500) = %p\n",pram_ptr);
- printf("pram_ptr->fen_genfcc.fcc_rbase %08x\n",
- pram_ptr->fen_genfcc.fcc_rbase);
- printf("pram_ptr->fen_genfcc.fcc_tbase %08x\n",
- pram_ptr->fen_genfcc.fcc_tbase);
-#endif
-
- /* 28.9 - (8)(9): clear out events in FCCE */
- /* 28.9 - (9): FCCM: mask all events */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.fcce = ~0x0;
- cpm->im_cpm_fcc1.fccm = 0;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.fcce = ~0x0;
- cpm->im_cpm_fcc2.fccm = 0;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.fcce = ~0x0;
- cpm->im_cpm_fcc3.fccm = 0;
- }
-
- /* 28.9 - (10-12): we don't use ethernet interrupts */
-
- /* 28.9 - (13)
- *
- * Let's re-initialize the channel now. We have to do it later
- * than the manual describes because we have just now finished
- * the BD initialization.
- */
- cp->cpcr = mk_cr_cmd(info->cpm_cr_enet_page,
- info->cpm_cr_enet_sblock,
- 0x0c,
- CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cpcr & CPM_CR_FLG);
-
- /* 28.9 - (14): enable tx/rx in gfmr */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- } else if (info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- } else if (info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR;
- }
-
- return 1;
-}
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s * info = dev->priv;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- /* write GFMR: disable tx/rx */
- if(info->ether_index == 0) {
- cpm->im_cpm_fcc1.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- } else if(info->ether_index == 1) {
- cpm->im_cpm_fcc2.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- } else if(info->ether_index == 2) {
- cpm->im_cpm_fcc3.gfmr &= ~(FCC_GFMR_ENT | FCC_GFMR_ENR);
- }
-}
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- {
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "FCC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- dev->priv = &ether_fcc_info[i];
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) \
- && defined(CONFIG_BITBANGMII)
- miiphy_register(dev->name,
- bb_miiphy_read, bb_miiphy_write);
-#endif
- }
-
- return 1;
-}
-
-#endif
diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c
deleted file mode 100644
index 1d11ab4..0000000
--- a/cpu/mpc85xx/fdt.c
+++ /dev/null
@@ -1,417 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/processor.h>
-#include <linux/ctype.h>
-#ifdef CONFIG_FSL_ESDHC
-#include <fsl_esdhc.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void ft_qe_setup(void *blob);
-extern void ft_fixup_num_cores(void *blob);
-
-#ifdef CONFIG_MP
-#include "mp.h"
-
-void ft_fixup_cpu(void *blob, u64 memory_limit)
-{
- int off;
- ulong spin_tbl_addr = get_spin_phys_addr();
- u32 bootpg = determine_mp_bootpg();
- u32 id = get_my_id();
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-
- if (reg) {
- if (*reg == id) {
- fdt_setprop_string(blob, off, "status", "okay");
- } else {
- u64 val = *reg * SIZE_BOOT_ENTRY + spin_tbl_addr;
- val = cpu_to_fdt32(val);
- fdt_setprop_string(blob, off, "status",
- "disabled");
- fdt_setprop_string(blob, off, "enable-method",
- "spin-table");
- fdt_setprop(blob, off, "cpu-release-addr",
- &val, sizeof(val));
- }
- } else {
- printf ("cpu NULL\n");
- }
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
-
- /* Reserve the boot page so OSes dont use it */
- if ((u64)bootpg < memory_limit) {
- off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
- if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
- }
-}
-#endif
-
-#define ft_fixup_l3cache(x, y)
-
-#if defined(CONFIG_L2_CACHE)
-/* return size in kilobytes */
-static inline u32 l2cache_size(void)
-{
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
- volatile u32 l2siz_field = (l2cache->l2ctl >> 28) & 0x3;
- u32 ver = SVR_SOC_VER(get_svr());
-
- switch (l2siz_field) {
- case 0x0:
- break;
- case 0x1:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
- return 128;
- else
- return 256;
- break;
- case 0x2:
- if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E)
- return 256;
- else
- return 512;
- break;
- case 0x3:
- return 1024;
- break;
- }
-
- return 0;
-}
-
-static inline void ft_fixup_l2cache(void *blob)
-{
- int len, off;
- u32 *ph;
- struct cpu_type *cpu = identify_cpu(SVR_SOC_VER(get_svr()));
- char compat_buf[38];
-
- const u32 line_size = 32;
- const u32 num_ways = 8;
- const u32 size = l2cache_size() * 1024;
- const u32 num_sets = size / (line_size * num_ways);
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- if (off < 0) {
- debug("no cpu node fount\n");
- return;
- }
-
- ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- return ;
- }
-
- off = fdt_node_offset_by_phandle(blob, *ph);
- if (off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- return ;
- }
-
- if (cpu) {
- if (isdigit(cpu->name[0]))
- len = sprintf(compat_buf,
- "fsl,mpc%s-l2-cache-controller", cpu->name);
- else
- len = sprintf(compat_buf,
- "fsl,%c%s-l2-cache-controller",
- tolower(cpu->name[0]), cpu->name + 1);
-
- sprintf(&compat_buf[len + 1], "cache");
- }
- fdt_setprop(blob, off, "cache-unified", NULL, 0);
- fdt_setprop_cell(blob, off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, off, "cache-size", size);
- fdt_setprop_cell(blob, off, "cache-sets", num_sets);
- fdt_setprop_cell(blob, off, "cache-level", 2);
- fdt_setprop(blob, off, "compatible", compat_buf, sizeof(compat_buf));
-
- /* we dont bother w/L3 since no platform of this type has one */
-}
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
-static inline void ft_fixup_l2cache(void *blob)
-{
- int off, l2_off, l3_off = -1;
- u32 *ph;
- u32 l2cfg0 = mfspr(SPRN_L2CFG0);
- u32 size, line_size, num_ways, num_sets;
-
- size = (l2cfg0 & 0x3fff) * 64 * 1024;
- num_ways = ((l2cfg0 >> 14) & 0x1f) + 1;
- line_size = (((l2cfg0 >> 23) & 0x3) + 1) * 32;
- num_sets = size / (line_size * num_ways);
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
-
- while (off != -FDT_ERR_NOTFOUND) {
- ph = (u32 *)fdt_getprop(blob, off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- goto next;
- }
-
- l2_off = fdt_node_offset_by_phandle(blob, *ph);
- if (l2_off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- goto next;
- }
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
- fdt_setprop_cell(blob, l2_off, "cache-stash-id",
- (*reg * 2) + 32 + 1);
- }
-#endif
-
- fdt_setprop(blob, l2_off, "cache-unified", NULL, 0);
- fdt_setprop_cell(blob, l2_off, "cache-block-size", line_size);
- fdt_setprop_cell(blob, l2_off, "cache-size", size);
- fdt_setprop_cell(blob, l2_off, "cache-sets", num_sets);
- fdt_setprop_cell(blob, l2_off, "cache-level", 2);
- fdt_setprop(blob, l2_off, "compatible", "cache", 6);
-
- if (l3_off < 0) {
- ph = (u32 *)fdt_getprop(blob, l2_off, "next-level-cache", 0);
-
- if (ph == NULL) {
- debug("no next-level-cache property\n");
- goto next;
- }
- l3_off = *ph;
- }
-next:
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
- if (l3_off > 0) {
- l3_off = fdt_node_offset_by_phandle(blob, l3_off);
- if (l3_off < 0) {
- printf("%s: %s\n", __func__, fdt_strerror(off));
- return ;
- }
- ft_fixup_l3cache(blob, l3_off);
- }
-}
-#else
-#define ft_fixup_l2cache(x)
-#endif
-
-static inline void ft_fixup_cache(void *blob)
-{
- int off;
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
-
- while (off != -FDT_ERR_NOTFOUND) {
- u32 l1cfg0 = mfspr(SPRN_L1CFG0);
- u32 l1cfg1 = mfspr(SPRN_L1CFG1);
- u32 isize, iline_size, inum_sets, inum_ways;
- u32 dsize, dline_size, dnum_sets, dnum_ways;
-
- /* d-side config */
- dsize = (l1cfg0 & 0x7ff) * 1024;
- dnum_ways = ((l1cfg0 >> 11) & 0xff) + 1;
- dline_size = (((l1cfg0 >> 23) & 0x3) + 1) * 32;
- dnum_sets = dsize / (dline_size * dnum_ways);
-
- fdt_setprop_cell(blob, off, "d-cache-block-size", dline_size);
- fdt_setprop_cell(blob, off, "d-cache-size", dsize);
- fdt_setprop_cell(blob, off, "d-cache-sets", dnum_sets);
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- if (reg)
- fdt_setprop_cell(blob, off, "cache-stash-id",
- (*reg * 2) + 32 + 0);
- }
-#endif
-
- /* i-side config */
- isize = (l1cfg1 & 0x7ff) * 1024;
- inum_ways = ((l1cfg1 >> 11) & 0xff) + 1;
- iline_size = (((l1cfg1 >> 23) & 0x3) + 1) * 32;
- inum_sets = isize / (iline_size * inum_ways);
-
- fdt_setprop_cell(blob, off, "i-cache-block-size", iline_size);
- fdt_setprop_cell(blob, off, "i-cache-size", isize);
- fdt_setprop_cell(blob, off, "i-cache-sets", inum_sets);
-
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
-
- ft_fixup_l2cache(blob);
-}
-
-
-void fdt_add_enet_stashing(void *fdt)
-{
- do_fixup_by_compat(fdt, "gianfar", "bd-stash", NULL, 0, 1);
-
- do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-len", 96, 1);
-
- do_fixup_by_compat_u32(fdt, "gianfar", "rx-stash-idx", 0, 1);
-}
-
-#if defined(CONFIG_SYS_DPAA_FMAN) || defined(CONFIG_SYS_DPAA_PME)
-static void ft_fixup_clks(void *blob, const char *alias, unsigned long freq)
-{
- const char *path = fdt_get_alias(blob, alias);
-
- int off = fdt_path_offset(blob, path);
-
- if (off >= 0) {
- off = fdt_setprop_cell(blob, off, "clock-frequency", freq);
- if (off > 0)
- printf("WARNING enable to set clock-frequency "
- "for %s: %s\n", alias, fdt_strerror(off));
- }
-}
-
-static void ft_fixup_dpaa_clks(void *blob)
-{
- sys_info_t sysinfo;
-
- get_sys_info(&sysinfo);
- ft_fixup_clks(blob, "fman0", sysinfo.freqFMan[0]);
-
-#if (CONFIG_SYS_NUM_FMAN == 2)
- ft_fixup_clks(blob, "fman1", sysinfo.freqFMan[1]);
-#endif
-
-#ifdef CONFIG_SYS_DPAA_PME
- ft_fixup_clks(blob, "pme", sysinfo.freqPME);
-#endif
-}
-#else
-#define ft_fixup_dpaa_clks(x)
-#endif
-
-#ifdef CONFIG_QE
-static void ft_fixup_qe_snum(void *blob)
-{
- unsigned int svr;
-
- svr = mfspr(SPRN_SVR);
- if (SVR_SOC_VER(svr) == SVR_8569_E) {
- if(IS_SVR_REV(svr, 1, 0))
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "fsl,qe-num-snums", 46, 1);
- else
- do_fixup_by_compat_u32(blob, "fsl,qe",
- "fsl,qe-num-snums", 76, 1);
- }
-}
-#endif
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- int off;
- int val;
- sys_info_t sysinfo;
-
- /* delete crypto node if not on an E-processor */
- if (!IS_E_PROCESSOR(get_svr()))
- fdt_fixup_crypto_node(blob, 0);
-
- fdt_fixup_ethernet(blob);
-
- fdt_add_enet_stashing(blob);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- get_sys_info(&sysinfo);
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
- val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
- fdt_setprop(blob, off, "clock-frequency", &val, 4);
- off = fdt_node_offset_by_prop_value(blob, off, "device_type",
- "cpu", 4);
- }
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
- do_fixup_by_compat_u32(blob, "fsl,pq3-localbus",
- "bus-frequency", gd->lbc_clk, 1);
- do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
-#ifdef CONFIG_QE
- ft_qe_setup(blob);
- ft_fixup_qe_snum(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
-#ifdef CONFIG_CPM2
- do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart",
- "current-speed", bd->bi_baudrate, 1);
-
- do_fixup_by_compat_u32(blob, "fsl,cpm2-brg",
- "clock-frequency", bd->bi_brgfreq, 1);
-#endif
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#ifdef CONFIG_MP
- ft_fixup_cpu(blob, (u64)bd->bi_memstart + (u64)bd->bi_memsize);
-#endif
- ft_fixup_num_cores(blob);
-
- ft_fixup_cache(blob);
-
-#if defined(CONFIG_FSL_ESDHC)
- fdt_fixup_esdhc(blob, bd);
-#endif
-
- ft_fixup_dpaa_clks(blob);
-}
diff --git a/cpu/mpc85xx/fixed_ivor.S b/cpu/mpc85xx/fixed_ivor.S
deleted file mode 100644
index 320cae3..0000000
--- a/cpu/mpc85xx/fixed_ivor.S
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * Kumar Gala <kumar.gala@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* This file is intended to be included by other asm code since
- * we will want to execute this on both the primary core when
- * it does a bootm and the secondary core's that get released
- * out of the spin table */
-
-#define SET_IVOR(vector_number, vector_offset) \
- li r3,vector_offset@l; \
- mtspr SPRN_IVOR##vector_number,r3;
-
-#define SET_GIVOR(vector_number, vector_offset) \
- li r3,vector_offset@l; \
- mtspr SPRN_GIVOR##vector_number,r3;
-
- SET_IVOR(0, 0x020) /* Critical Input */
- SET_IVOR(1, 0x000) /* Machine Check */
- SET_IVOR(2, 0x060) /* Data Storage */
- SET_IVOR(3, 0x080) /* Instruction Storage */
- SET_IVOR(4, 0x0a0) /* External Input */
- SET_IVOR(5, 0x0c0) /* Alignment */
- SET_IVOR(6, 0x0e0) /* Program */
- SET_IVOR(7, 0x100) /* FP Unavailable */
- SET_IVOR(8, 0x120) /* System Call */
- SET_IVOR(9, 0x140) /* Auxiliary Processor Unavailable */
- SET_IVOR(10, 0x160) /* Decrementer */
- SET_IVOR(11, 0x180) /* Fixed Interval Timer */
- SET_IVOR(12, 0x1a0) /* Watchdog Timer */
- SET_IVOR(13, 0x1c0) /* Data TLB Error */
- SET_IVOR(14, 0x1e0) /* Instruction TLB Error */
- SET_IVOR(15, 0x040) /* Debug */
-
-/* e500v1 & e500v2 only */
-#ifndef CONFIG_E500MC
- SET_IVOR(32, 0x200) /* SPE Unavailable */
- SET_IVOR(33, 0x220) /* Embedded FP Data */
- SET_IVOR(34, 0x240) /* Embedded FP Round */
-#endif
-
- SET_IVOR(35, 0x260) /* Performance monitor */
-
-/* e500mc only */
-#ifdef CONFIG_E500MC
- SET_IVOR(36, 0x280) /* Processor doorbell */
- SET_IVOR(37, 0x2a0) /* Processor doorbell critical */
- SET_IVOR(38, 0x2c0) /* Guest Processor doorbell */
- SET_IVOR(39, 0x2e0) /* Guest Processor critical & machine check */
- SET_IVOR(40, 0x300) /* Hypervisor system call */
- SET_IVOR(41, 0x320) /* Hypervisor Priviledge */
-
- SET_GIVOR(2, 0x060) /* Guest Data Storage */
- SET_GIVOR(3, 0x080) /* Guest Instruction Storage */
- SET_GIVOR(4, 0x0a0) /* Guest External Input */
- SET_GIVOR(8, 0x120) /* Guest System Call */
- SET_GIVOR(13, 0x1c0) /* Guest Data TLB Error */
- SET_GIVOR(14, 0x1e0) /* Guest Instruction TLB Error */
-#endif
diff --git a/cpu/mpc85xx/interrupts.c b/cpu/mpc85xx/interrupts.c
deleted file mode 100644
index 409367d..0000000
--- a/cpu/mpc85xx/interrupts.c
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-int interrupt_init_cpu(unsigned int *decrementer_count)
-{
- ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC85xx_PIC_ADDR;
-
- out_be32(&pic->gcr, MPC85xx_PICGCR_RST);
- while (in_be32(&pic->gcr) & MPC85xx_PICGCR_RST)
- ;
- out_be32(&pic->gcr, MPC85xx_PICGCR_M);
- in_be32(&pic->gcr);
-
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
-
- /* PIE is same as DIE, dec interrupt enable */
- mtspr(SPRN_TCR, TCR_PIE);
-
-#ifdef CONFIG_INTERRUPTS
- pic->iivpr1 = 0x810001; /* 50220 enable ecm interrupts */
- debug("iivpr1@%x = %x\n", (uint)&pic->iivpr1, pic->iivpr1);
-
- pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
- debug("iivpr2@%x = %x\n", (uint)&pic->iivpr2, pic->iivpr2);
-
- pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
- debug("iivpr3@%x = %x\n", (uint)&pic->iivpr3, pic->iivpr3);
-
-#ifdef CONFIG_PCI1
- pic->iivpr8 = 0x810008; /* enable pci1 interrupts */
- debug("iivpr8@%x = %x\n", (uint)&pic->iivpr8, pic->iivpr8);
-#endif
-#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
- pic->iivpr9 = 0x810009; /* enable pci1 interrupts */
- debug("iivpr9@%x = %x\n", (uint)&pic->iivpr9, pic->iivpr9);
-#endif
-#ifdef CONFIG_PCIE1
- pic->iivpr10 = 0x81000a; /* enable pcie1 interrupts */
- debug("iivpr10@%x = %x\n", (uint)&pic->iivpr10, pic->iivpr10);
-#endif
-#ifdef CONFIG_PCIE3
- pic->iivpr11 = 0x81000b; /* enable pcie3 interrupts */
- debug("iivpr11@%x = %x\n", (uint)&pic->iivpr11, pic->iivpr11);
-#endif
-
- pic->ctpr=0; /* 40080 clear current task priority register */
-#endif
-
- return (0);
-}
-
-/* Install and free a interrupt handler. Not implemented yet. */
-
-void
-irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
- return;
-}
-
-void
-irq_free_handler(int vec)
-{
- return;
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* PIS is same as DIS, dec interrupt status */
- mtspr(SPRN_TSR, TSR_PIS);
-}
-
-#if defined(CONFIG_CMD_IRQ)
-/* irqinfo - print information about PCI devices,not implemented. */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- return 0;
-}
-#endif
diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c
deleted file mode 100644
index 826bf32..0000000
--- a/cpu/mpc85xx/mp.c
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <ioports.h>
-#include <lmb.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include "mp.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32 get_my_id()
-{
- return mfspr(SPRN_PIR);
-}
-
-int cpu_reset(int nr)
-{
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- out_be32(&pic->pir, 1 << nr);
- /* the dummy read works around an errata on early 85xx MP PICs */
- (void)in_be32(&pic->pir);
- out_be32(&pic->pir, 0x0);
-
- return 0;
-}
-
-int cpu_status(int nr)
-{
- u32 *table, id = get_my_id();
-
- if (nr == id) {
- table = (u32 *)get_spin_virt_addr();
- printf("table base @ 0x%p\n", table);
- } else {
- table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
- printf("Running on cpu %d\n", id);
- printf("\n");
- printf("table @ 0x%p\n", table);
- printf(" addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
- printf(" pir - 0x%08x\n", table[BOOT_ENTRY_PIR]);
- printf(" r3 - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
- printf(" r6 - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_FSL_CORENET
-int cpu_disable(int nr)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- setbits_be32(&gur->coredisrl, 1 << nr);
-
- return 0;
-}
-#else
-int cpu_disable(int nr)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- switch (nr) {
- case 0:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU0);
- break;
- case 1:
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_CPU1);
- break;
- default:
- printf("Invalid cpu number for disable %d\n", nr);
- return 1;
- }
-
- return 0;
-}
-#endif
-
-static u8 boot_entry_map[4] = {
- 0,
- BOOT_ENTRY_PIR,
- BOOT_ENTRY_R3_LOWER,
- BOOT_ENTRY_R6_LOWER,
-};
-
-int cpu_release(int nr, int argc, char *argv[])
-{
- u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
- u64 boot_addr;
-
- if (nr == get_my_id()) {
- printf("Invalid to release the boot core.\n\n");
- return 1;
- }
-
- if (argc != 4) {
- printf("Invalid number of arguments to release.\n\n");
- return 1;
- }
-
- boot_addr = simple_strtoull(argv[0], NULL, 16);
-
- /* handle pir, r3, r6 */
- for (i = 1; i < 4; i++) {
- if (argv[i][0] != '-') {
- u8 entry = boot_entry_map[i];
- val = simple_strtoul(argv[i], NULL, 16);
- table[entry] = val;
- }
- }
-
- table[BOOT_ENTRY_ADDR_UPPER] = (u32)(boot_addr >> 32);
-
- /* ensure all table updates complete before final address write */
- eieio();
-
- table[BOOT_ENTRY_ADDR_LOWER] = (u32)(boot_addr & 0xffffffff);
-
- return 0;
-}
-
-u32 determine_mp_bootpg(void)
-{
- /* if we have 4G or more of memory, put the boot page at 4Gb-4k */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfffff000);
-
- return (gd->ram_size - 4096);
-}
-
-ulong get_spin_phys_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (determine_mp_bootpg() +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-ulong get_spin_virt_addr(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __spin_table;
-
- return (CONFIG_BPTR_VIRT_ADDR +
- (ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-#ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
-{
- u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
- volatile ccsr_gur_t *gur;
- volatile ccsr_local_t *ccm;
- volatile ccsr_rcpm_t *rcpm;
- volatile ccsr_pic_t *pic;
- int timeout = 10;
- u32 nr_cpus;
- struct law_entry e;
-
- gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- ccm = (void *)(CONFIG_SYS_FSL_CORENET_CCM_ADDR);
- rcpm = (void *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR);
- pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
-
- nr_cpus = ((in_be32(&pic->frr) >> 8) & 0xff) + 1;
-
- whoami = in_be32(&pic->whoami);
- cpu_up_mask = 1 << whoami;
- out_be32(&ccm->bstrl, bootpg);
-
- e = find_law(bootpg);
- out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
-
- /* readback to sync write */
- in_be32(&ccm->bstrar);
-
- /* disable time base at the platform */
- out_be32(&rcpm->ctbenrl, cpu_up_mask);
-
- /* release the hounds */
- up = ((1 << nr_cpus) - 1);
- out_be32(&gur->brrl, up);
-
- /* wait for everyone */
- while (timeout) {
- int i;
- for (i = 0; i < nr_cpus; i++) {
- if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
- cpu_up_mask |= (1 << i);
- };
-
- if ((cpu_up_mask & up) == up)
- break;
-
- udelay(100);
- timeout--;
- }
-
- if (timeout == 0)
- printf("CPU up timeout. CPU up mask is %x should be %x\n",
- cpu_up_mask, up);
-
- /* enable time base at the platform */
- out_be32(&rcpm->ctbenrl, 0);
- mtspr(SPRN_TBWU, 0);
- mtspr(SPRN_TBWL, 0);
- out_be32(&rcpm->ctbenrl, (1 << nr_cpus) - 1);
-
-#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
- /*
- * Disabling Boot Page Translation allows the memory region 0xfffff000
- * to 0xffffffff to be used normally. Leaving Boot Page Translation
- * enabled remaps 0xfffff000 to SDRAM which makes that memory region
- * unusable for normal operation but it does allow OSes to easily
- * reset a processor core to put it back into U-Boot's spinloop.
- */
- clrbits_be32(&ecm->bptr, 0x80000000);
-#endif
-}
-#else
-static void plat_mp_up(unsigned long bootpg)
-{
- u32 up, cpu_up_mask, whoami;
- u32 *table = (u32 *)get_spin_virt_addr();
- volatile u32 bpcr;
- volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
- u32 devdisr;
- int timeout = 10;
-
- whoami = in_be32(&pic->whoami);
- out_be32(&ecm->bptr, 0x80000000 | (bootpg >> 12));
-
- /* disable time base at the platform */
- devdisr = in_be32(&gur->devdisr);
- if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB0;
- else
- devdisr |= MPC85xx_DEVDISR_TB1;
- out_be32(&gur->devdisr, devdisr);
-
- /* release the hounds */
- up = ((1 << cpu_numcores()) - 1);
- bpcr = in_be32(&ecm->eebpcr);
- bpcr |= (up << 24);
- out_be32(&ecm->eebpcr, bpcr);
- asm("sync; isync; msync");
-
- cpu_up_mask = 1 << whoami;
- /* wait for everyone */
- while (timeout) {
- int i;
- for (i = 0; i < cpu_numcores(); i++) {
- if (table[i * NUM_BOOT_ENTRY + BOOT_ENTRY_ADDR_LOWER])
- cpu_up_mask |= (1 << i);
- };
-
- if ((cpu_up_mask & up) == up)
- break;
-
- udelay(100);
- timeout--;
- }
-
- if (timeout == 0)
- printf("CPU up timeout. CPU up mask is %x should be %x\n",
- cpu_up_mask, up);
-
- /* enable time base at the platform */
- if (whoami)
- devdisr |= MPC85xx_DEVDISR_TB1;
- else
- devdisr |= MPC85xx_DEVDISR_TB0;
- out_be32(&gur->devdisr, devdisr);
- mtspr(SPRN_TBWU, 0);
- mtspr(SPRN_TBWL, 0);
-
- devdisr &= ~(MPC85xx_DEVDISR_TB0 | MPC85xx_DEVDISR_TB1);
- out_be32(&gur->devdisr, devdisr);
-
-#ifdef CONFIG_MPC8xxx_DISABLE_BPTR
- /*
- * Disabling Boot Page Translation allows the memory region 0xfffff000
- * to 0xffffffff to be used normally. Leaving Boot Page Translation
- * enabled remaps 0xfffff000 to SDRAM which makes that memory region
- * unusable for normal operation but it does allow OSes to easily
- * reset a processor core to put it back into U-Boot's spinloop.
- */
- clrbits_be32(&ecm->bptr, 0x80000000);
-#endif
-}
-#endif
-
-void cpu_mp_lmb_reserve(struct lmb *lmb)
-{
- u32 bootpg = determine_mp_bootpg();
-
- lmb_reserve(lmb, bootpg, 4096);
-}
-
-void setup_mp(void)
-{
- extern ulong __secondary_start_page;
- extern ulong __bootpg_addr;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
-
- /* Store the bootpg's SDRAM address for use by secondary CPU cores */
- __bootpg_addr = bootpg;
-
- /* look for the tlb covering the reset page, there better be one */
- int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
-
- /* we found a match */
- if (i != -1) {
- /* map reset page to bootpg so we can copy code there */
- disable_tlb(i);
-
- set_tlb(1, CONFIG_BPTR_VIRT_ADDR, bootpg, /* tlb, epn, rpn */
- MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
- 0, i, BOOKE_PAGESZ_4K, 1); /* ts, esel, tsize, iprot */
-
- memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
-
- plat_mp_up(bootpg);
- } else {
- puts("WARNING: No reset page TLB. "
- "Skipping secondary core setup\n");
- }
-}
diff --git a/cpu/mpc85xx/mp.h b/cpu/mpc85xx/mp.h
deleted file mode 100644
index 3422cc1..0000000
--- a/cpu/mpc85xx/mp.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MPC85XX_MP_H_
-#define __MPC85XX_MP_H_
-
-#include <asm/mp.h>
-
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
-u32 get_my_id(void);
-
-#define BOOT_ENTRY_ADDR_UPPER 0
-#define BOOT_ENTRY_ADDR_LOWER 1
-#define BOOT_ENTRY_R3_UPPER 2
-#define BOOT_ENTRY_R3_LOWER 3
-#define BOOT_ENTRY_RESV 4
-#define BOOT_ENTRY_PIR 5
-#define BOOT_ENTRY_R6_UPPER 6
-#define BOOT_ENTRY_R6_LOWER 7
-#define NUM_BOOT_ENTRY 8
-#define SIZE_BOOT_ENTRY (NUM_BOOT_ENTRY * sizeof(u32))
-
-#endif
diff --git a/cpu/mpc85xx/mpc8536_serdes.c b/cpu/mpc85xx/mpc8536_serdes.c
deleted file mode 100644
index cb6a6f0..0000000
--- a/cpu/mpc85xx/mpc8536_serdes.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * Copyright (C) 2008 Freescale Semicondutor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <config.h>
-#include <common.h>
-#include <asm/io.h>
-#include <asm/immap_85xx.h>
-
-/* PORDEVSR register */
-#define GUTS_PORDEVSR_OFFS 0xc
-#define GUTS_PORDEVSR_SERDES2_IO_SEL 0x38000000
-#define GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT 27
-
-/* SerDes CR0 register */
-#define FSL_SRDSCR0_OFFS 0x0
-#define FSL_SRDSCR0_TXEQA_MASK 0x00007000
-#define FSL_SRDSCR0_TXEQA_SGMII 0x00004000
-#define FSL_SRDSCR0_TXEQA_SATA 0x00001000
-#define FSL_SRDSCR0_TXEQE_MASK 0x00000700
-#define FSL_SRDSCR0_TXEQE_SGMII 0x00000400
-#define FSL_SRDSCR0_TXEQE_SATA 0x00000100
-
-/* SerDes CR1 register */
-#define FSL_SRDSCR1_OFFS 0x4
-#define FSL_SRDSCR1_LANEA_MASK 0x80200000
-#define FSL_SRDSCR1_LANEA_OFF 0x80200000
-#define FSL_SRDSCR1_LANEE_MASK 0x08020000
-#define FSL_SRDSCR1_LANEE_OFF 0x08020000
-
-/* SerDes CR2 register */
-#define FSL_SRDSCR2_OFFS 0x8
-#define FSL_SRDSCR2_EICA_MASK 0x00001f00
-#define FSL_SRDSCR2_EICA_SGMII 0x00000400
-#define FSL_SRDSCR2_EICA_SATA 0x00001400
-#define FSL_SRDSCR2_EICE_MASK 0x0000001f
-#define FSL_SRDSCR2_EICE_SGMII 0x00000004
-#define FSL_SRDSCR2_EICE_SATA 0x00000014
-
-/* SerDes CR3 register */
-#define FSL_SRDSCR3_OFFS 0xc
-#define FSL_SRDSCR3_LANEA_MASK 0x3f000700
-#define FSL_SRDSCR3_LANEA_SGMII 0x00000000
-#define FSL_SRDSCR3_LANEA_SATA 0x15000500
-#define FSL_SRDSCR3_LANEE_MASK 0x003f0007
-#define FSL_SRDSCR3_LANEE_SGMII 0x00000000
-#define FSL_SRDSCR3_LANEE_SATA 0x00150005
-
-void fsl_serdes_init(void)
-{
- void *guts = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- void *sd = (void *)CONFIG_SYS_MPC85xx_SERDES2_ADDR;
- u32 pordevsr = in_be32(guts + GUTS_PORDEVSR_OFFS);
- u32 srds2_io_sel;
- u32 tmp;
-
- /* parse the SRDS2_IO_SEL of PORDEVSR */
- srds2_io_sel = (pordevsr & GUTS_PORDEVSR_SERDES2_IO_SEL)
- >> GUTS_PORDEVSR_SERDES2_IO_SEL_SHIFT;
-
- switch (srds2_io_sel) {
- case 1: /* Lane A - SATA1, Lane E - SATA2 */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SATA;
- tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
- tmp |= FSL_SRDSCR0_TXEQE_SATA;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SATA;
- tmp &= ~FSL_SRDSCR2_EICE_MASK;
- tmp |= FSL_SRDSCR2_EICE_SATA;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SATA;
- tmp &= ~FSL_SRDSCR3_LANEE_MASK;
- tmp |= FSL_SRDSCR3_LANEE_SATA;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 3: /* Lane A - SATA1, Lane E - disabled */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SATA;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SATA;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SATA;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 4: /* Lane A - eTSEC1 SGMII, Lane E - eTSEC3 SGMII */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SGMII;
- tmp &= ~FSL_SRDSCR0_TXEQE_MASK;
- tmp |= FSL_SRDSCR0_TXEQE_SGMII;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SGMII;
- tmp &= ~FSL_SRDSCR2_EICE_MASK;
- tmp |= FSL_SRDSCR2_EICE_SGMII;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SGMII;
- tmp &= ~FSL_SRDSCR3_LANEE_MASK;
- tmp |= FSL_SRDSCR3_LANEE_SGMII;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 6: /* Lane A - eTSEC1 SGMII, Lane E - disabled */
- /* CR 0 */
- tmp = in_be32(sd + FSL_SRDSCR0_OFFS);
- tmp &= ~FSL_SRDSCR0_TXEQA_MASK;
- tmp |= FSL_SRDSCR0_TXEQA_SGMII;
- out_be32(sd + FSL_SRDSCR0_OFFS, tmp);
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- /* CR 2 */
- tmp = in_be32(sd + FSL_SRDSCR2_OFFS);
- tmp &= ~FSL_SRDSCR2_EICA_MASK;
- tmp |= FSL_SRDSCR2_EICA_SGMII;
- out_be32(sd + FSL_SRDSCR2_OFFS, tmp);
- /* CR 3 */
- tmp = in_be32(sd + FSL_SRDSCR3_OFFS);
- tmp &= ~FSL_SRDSCR3_LANEA_MASK;
- tmp |= FSL_SRDSCR3_LANEA_SGMII;
- out_be32(sd + FSL_SRDSCR3_OFFS, tmp);
- break;
- case 7: /* Lane A - disabled, Lane E - disabled */
- /* CR 1 */
- tmp = in_be32(sd + FSL_SRDSCR1_OFFS);
- tmp &= ~FSL_SRDSCR1_LANEA_MASK;
- tmp |= FSL_SRDSCR1_LANEA_OFF;
- tmp &= ~FSL_SRDSCR1_LANEE_MASK;
- tmp |= FSL_SRDSCR1_LANEE_OFF;
- out_be32(sd + FSL_SRDSCR1_OFFS, tmp);
- break;
- default:
- break;
- }
-}
diff --git a/cpu/mpc85xx/pci.c b/cpu/mpc85xx/pci.c
deleted file mode 100644
index 75d2716..0000000
--- a/cpu/mpc85xx/pci.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola Inc.
- * Xianghua Xiao (x.xiao@motorola.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCI Configuration space access support for MPC85xx PCI Bridge
- */
-#include <common.h>
-#include <asm/cpm_85xx.h>
-#include <pci.h>
-
-#if !defined(CONFIG_FSL_PCI_INIT)
-
-#ifndef CONFIG_SYS_PCI1_MEM_BUS
-#define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI1_IO_BUS
-#define CONFIG_SYS_PCI1_IO_BUS CONFIG_SYS_PCI1_IO_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI2_MEM_BUS
-#define CONFIG_SYS_PCI2_MEM_BUS CONFIG_SYS_PCI2_MEM_BASE
-#endif
-
-#ifndef CONFIG_SYS_PCI2_IO_BUS
-#define CONFIG_SYS_PCI2_IO_BUS CONFIG_SYS_PCI2_IO_BASE
-#endif
-
-static struct pci_controller *pci_hose;
-
-void
-pci_mpc85xx_init(struct pci_controller *board_hose)
-{
- u16 reg16;
- u32 dev;
-
- volatile ccsr_pcix_t *pcix = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
-#ifdef CONFIG_MPC85XX_PCI2
- volatile ccsr_pcix_t *pcix2 = (void *)(CONFIG_SYS_MPC85xx_PCIX2_ADDR);
-#endif
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct pci_controller * hose;
-
- pci_hose = board_hose;
-
- hose = &pci_hose[0];
-
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR+0x8000),
- (CONFIG_SYS_IMMR+0x8004));
-
- /*
- * Hose scan.
- */
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-
- if (!(gur->pordevsr & MPC85xx_PORDEVSR_PCI1)) {
- /* PCI-X init */
- if (CONFIG_SYS_CLK_FREQ < 66000000)
- printf("PCI-X will only work at 66 MHz\n");
-
- reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
- | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
- pci_hose_write_config_word(hose, dev, PCIX_COMMAND, reg16);
- }
-
- pcix->potar1 = (CONFIG_SYS_PCI1_MEM_BUS >> 12) & 0x000fffff;
- pcix->potear1 = 0x00000000;
- pcix->powbar1 = (CONFIG_SYS_PCI1_MEM_PHYS >> 12) & 0x000fffff;
- pcix->powbear1 = 0x00000000;
- pcix->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI1_MEM_SIZE) - 1));
-
- pcix->potar2 = (CONFIG_SYS_PCI1_IO_BUS >> 12) & 0x000fffff;
- pcix->potear2 = 0x00000000;
- pcix->powbar2 = (CONFIG_SYS_PCI1_IO_PHYS >> 12) & 0x000fffff;
- pcix->powbear2 = 0x00000000;
- pcix->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI1_IO_SIZE) - 1));
-
- pcix->pitar1 = 0x00000000;
- pcix->piwbar1 = 0x00000000;
- pcix->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
-
- pcix->powar3 = 0;
- pcix->powar4 = 0;
- pcix->piwar2 = 0;
- pcix->piwar3 = 0;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
- pci_register_hose(hose);
-
-#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
- /*
- * This is a SW workaround for an apparent HW problem
- * in the PCI controller on the MPC85555/41 CDS boards.
- * The first config cycle must be to a valid, known
- * device on the PCI bus in order to trick the PCI
- * controller state machine into a known valid state.
- * Without this, the first config cycle has the chance
- * of hanging the controller permanently, just leaving
- * it in a semi-working state, or leaving it working.
- *
- * Pick on the Tundra, Device 17, to get it right.
- */
- {
- u8 header_type;
-
- pci_hose_read_config_byte(hose,
- PCI_BDF(0,BRIDGE_ID,0),
- PCI_HEADER_TYPE,
- &header_type);
- }
-#endif
-
- hose->last_busno = pci_hose_scan(hose);
-
-#ifdef CONFIG_MPC85XX_PCI2
- hose = &pci_hose[1];
-
- hose->first_busno = pci_hose[0].last_busno + 1;
- hose->last_busno = 0xff;
-
- pci_setup_indirect(hose,
- (CONFIG_SYS_IMMR+0x9000),
- (CONFIG_SYS_IMMR+0x9004));
-
- dev = PCI_BDF(hose->first_busno, 0, 0);
- pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);
- reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
- pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);
-
- /*
- * Clear non-reserved bits in status register.
- */
- pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
-
- pcix2->potar1 = (CONFIG_SYS_PCI2_MEM_BUS >> 12) & 0x000fffff;
- pcix2->potear1 = 0x00000000;
- pcix2->powbar1 = (CONFIG_SYS_PCI2_MEM_PHYS >> 12) & 0x000fffff;
- pcix2->powbear1 = 0x00000000;
- pcix2->powar1 = (POWAR_EN | POWAR_MEM_READ |
- POWAR_MEM_WRITE | (__ilog2(CONFIG_SYS_PCI2_MEM_SIZE) - 1));
-
- pcix2->potar2 = (CONFIG_SYS_PCI2_IO_BUS >> 12) & 0x000fffff;
- pcix2->potear2 = 0x00000000;
- pcix2->powbar2 = (CONFIG_SYS_PCI2_IO_PHYS >> 12) & 0x000fffff;
- pcix2->powbear2 = 0x00000000;
- pcix2->powar2 = (POWAR_EN | POWAR_IO_READ |
- POWAR_IO_WRITE | (__ilog2(CONFIG_SYS_PCI2_IO_SIZE) - 1));
-
- pcix2->pitar1 = 0x00000000;
- pcix2->piwbar1 = 0x00000000;
- pcix2->piwar1 = (PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
- PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP | PIWAR_MEM_2G);
-
- pcix2->powar3 = 0;
- pcix2->powar4 = 0;
- pcix2->piwar2 = 0;
- pcix2->piwar3 = 0;
-
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 1,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 2;
-
- /*
- * Hose scan.
- */
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
-#endif
-}
-#endif /* !CONFIG_FSL_PCI_INIT */
diff --git a/cpu/mpc85xx/qe_io.c b/cpu/mpc85xx/qe_io.c
deleted file mode 100644
index 72a29b7..0000000
--- a/cpu/mpc85xx/qe_io.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * Dave Liu <daveliu@freescale.com>
- * based on source code of Shlomi Gridish
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "common.h"
-#include "asm/errno.h"
-#include "asm/io.h"
-#include "asm/immap_85xx.h"
-
-#if defined(CONFIG_QE)
-#define NUM_OF_PINS 32
-void qe_config_iopin(u8 port, u8 pin, int dir, int open_drain, int assign)
-{
- u32 pin_2bit_mask;
- u32 pin_2bit_dir;
- u32 pin_2bit_assign;
- u32 pin_1bit_mask;
- u32 tmp_val;
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- volatile par_io_t *par_io = (volatile par_io_t *)
- &(gur->qe_par_io);
-
- /* Caculate pin location and 2bit mask and dir */
- pin_2bit_mask = (u32)(0x3 << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
- pin_2bit_dir = (u32)(dir << (NUM_OF_PINS-(pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Setup the direction */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ? \
- in_be32(&par_io[port].cpdir2) :
- in_be32(&par_io[port].cpdir1);
-
- if (pin > (NUM_OF_PINS/2) -1) {
- out_be32(&par_io[port].cpdir2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cpdir2, pin_2bit_dir | tmp_val);
- } else {
- out_be32(&par_io[port].cpdir1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cpdir1, pin_2bit_dir | tmp_val);
- }
-
- /* Calculate pin location for 1bit mask */
- pin_1bit_mask = (u32)(1 << (NUM_OF_PINS - (pin+1)));
-
- /* Setup the open drain */
- tmp_val = in_be32(&par_io[port].cpodr);
- if (open_drain)
- out_be32(&par_io[port].cpodr, pin_1bit_mask | tmp_val);
- else
- out_be32(&par_io[port].cpodr, ~pin_1bit_mask & tmp_val);
-
- /* Setup the assignment */
- tmp_val = (pin > (NUM_OF_PINS/2) - 1) ?
- in_be32(&par_io[port].cppar2):
- in_be32(&par_io[port].cppar1);
- pin_2bit_assign = (u32)(assign
- << (NUM_OF_PINS - (pin%(NUM_OF_PINS/2)+1)*2));
-
- /* Clear and set 2 bits mask */
- if (pin > (NUM_OF_PINS/2) - 1) {
- out_be32(&par_io[port].cppar2, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cppar2, pin_2bit_assign | tmp_val);
- } else {
- out_be32(&par_io[port].cppar1, ~pin_2bit_mask & tmp_val);
- out_be32(&par_io[port].cppar1, pin_2bit_assign | tmp_val);
- }
-}
-
-#endif /* CONFIG_QE */
diff --git a/cpu/mpc85xx/release.S b/cpu/mpc85xx/release.S
deleted file mode 100644
index 0b5b9da..0000000
--- a/cpu/mpc85xx/release.S
+++ /dev/null
@@ -1,311 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- * Kumar Gala <kumar.gala@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/* To boot secondary cpus, we need a place for them to start up.
- * Normally, they start at 0xfffffffc, but that's usually the
- * firmware, and we don't want to have to run the firmware again.
- * Instead, the primary cpu will set the BPTR to point here to
- * this page. We then set up the core, and head to
- * start_secondary. Note that this means that the code below
- * must never exceed 1023 instructions (the branch at the end
- * would then be the 1024th).
- */
- .globl __secondary_start_page
- .align 12
-__secondary_start_page:
-/* First do some preliminary setup */
- lis r3, HID0_EMCP@h /* enable machine check */
-#ifndef CONFIG_E500MC
- ori r3,r3,HID0_TBEN@l /* enable Timebase */
-#endif
-#ifdef CONFIG_PHYS_64BIT
- ori r3,r3,HID0_ENMAS7@l /* enable MAS7 updates */
-#endif
- mtspr SPRN_HID0,r3
-
-#ifndef CONFIG_E500MC
- li r3,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
- mfspr r0,PVR
- andi. r0,r0,0xff
- cmpwi r0,0x50@l /* if we are rev 5.0 or greater set MBDD */
- blt 1f
- /* Set MBDD bit also */
- ori r3, r3, HID1_MBDD@l
-1:
- mtspr SPRN_HID1,r3
-#endif
-
- /* Enable branch prediction */
- lis r3,BUCSR_ENABLE@h
- ori r3,r3,BUCSR_ENABLE@l
- mtspr SPRN_BUCSR,r3
-
- /* Ensure TB is 0 */
- li r3,0
- mttbl r3
- mttbu r3
-
- /* Enable/invalidate the I-Cache */
- lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
- ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
- mtspr SPRN_L1CSR1,r2
-1:
- mfspr r3,SPRN_L1CSR1
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
- ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
- mtspr SPRN_L1CSR1,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR1
- andi. r1,r3,L1CSR1_ICE@l
- beq 2b
-
- /* Enable/invalidate the D-Cache */
- lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
- ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
- mtspr SPRN_L1CSR0,r2
-1:
- mfspr r3,SPRN_L1CSR0
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
- ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
- mtspr SPRN_L1CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR0
- andi. r1,r3,L1CSR0_DCE@l
- beq 2b
-
-#define toreset(x) (x - __secondary_start_page + 0xfffff000)
-
- /* get our PIR to figure out our table entry */
- lis r3,toreset(__spin_table)@h
- ori r3,r3,toreset(__spin_table)@l
-
- /* r10 has the base address for the entry */
- mfspr r0,SPRN_PIR
-#ifdef CONFIG_E500MC
- rlwinm r4,r0,27,27,31
-#else
- mr r4,r0
-#endif
- slwi r8,r4,5
- add r10,r3,r8
-
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- slwi r8,r4,1
- addi r8,r8,32
- mtspr L1CSR2,r8
-#endif
-
-#ifdef CONFIG_BACKSIDE_L2_CACHE
- /* Enable/invalidate the L2 cache */
- msync
- lis r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@h
- ori r2,r2,(L2CSR0_L2FI|L2CSR0_L2LFC)@l
- mtspr SPRN_L2CSR0,r2
-1:
- mfspr r3,SPRN_L2CSR0
- and. r1,r3,r2
- bne 1b
-
-#ifdef CONFIG_SYS_CACHE_STASHING
- /* set stash id to (coreID) * 2 + 32 + L2 (1) */
- addi r3,r8,1
- mtspr SPRN_L2CSR1,r3
-#endif
-
- lis r3,CONFIG_SYS_INIT_L2CSR0@h
- ori r3,r3,CONFIG_SYS_INIT_L2CSR0@l
- mtspr SPRN_L2CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L2CSR0
- andis. r1,r3,L2CSR0_L2E@h
- beq 2b
-#endif
-
-#define EPAPR_MAGIC (0x45504150)
-#define ENTRY_ADDR_UPPER 0
-#define ENTRY_ADDR_LOWER 4
-#define ENTRY_R3_UPPER 8
-#define ENTRY_R3_LOWER 12
-#define ENTRY_RESV 16
-#define ENTRY_PIR 20
-#define ENTRY_R6_UPPER 24
-#define ENTRY_R6_LOWER 28
-#define ENTRY_SIZE 32
-
- /* setup the entry */
- li r3,0
- li r8,1
- stw r0,ENTRY_PIR(r10)
- stw r3,ENTRY_ADDR_UPPER(r10)
- stw r8,ENTRY_ADDR_LOWER(r10)
- stw r3,ENTRY_R3_UPPER(r10)
- stw r4,ENTRY_R3_LOWER(r10)
- stw r3,ENTRY_R6_UPPER(r10)
- stw r3,ENTRY_R6_LOWER(r10)
-
- /* load r13 with the address of the 'bootpg' in SDRAM */
- lis r13,toreset(__bootpg_addr)@h
- ori r13,r13,toreset(__bootpg_addr)@l
- lwz r13,0(r13)
-
- /* setup mapping for AS = 1, and jump there */
- lis r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
- mtspr SPRN_MAS0,r11
- lis r11,(MAS1_VALID|MAS1_IPROT)@h
- ori r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
- mtspr SPRN_MAS1,r11
- oris r11,r13,(MAS2_I|MAS2_G)@h
- ori r11,r13,(MAS2_I|MAS2_G)@l
- mtspr SPRN_MAS2,r11
- oris r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
- ori r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
- mtspr SPRN_MAS3,r11
- tlbwe
-
- bl 1f
-1: mflr r11
- /*
- * OR in 0xfff to create a mask of the bootpg SDRAM address. We use
- * this mask to fixup the cpu spin table and the address that we want
- * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
- * bootpg is at 0x7ffff000 in SDRAM.
- */
- ori r13,r13,0xfff
- and r11, r11, r13
- and r10, r10, r13
-
- addi r11,r11,(2f-1b)
- mfmsr r13
- ori r12,r13,MSR_IS|MSR_DS@l
-
- mtspr SPRN_SRR0,r11
- mtspr SPRN_SRR1,r12
- rfi
-
- /* spin waiting for addr */
-2:
- lwz r4,ENTRY_ADDR_LOWER(r10)
- andi. r11,r4,1
- bne 2b
- isync
-
- /* setup IVORs to match fixed offsets */
-#include "fixed_ivor.S"
-
- /* get the upper bits of the addr */
- lwz r11,ENTRY_ADDR_UPPER(r10)
-
- /* setup branch addr */
- mtspr SPRN_SRR0,r4
-
- /* mark the entry as released */
- li r8,3
- stw r8,ENTRY_ADDR_LOWER(r10)
-
- /* mask by ~64M to setup our tlb we will jump to */
- rlwinm r12,r4,0,0,5
-
- /* setup r3, r4, r5, r6, r7, r8, r9 */
- lwz r3,ENTRY_R3_LOWER(r10)
- li r4,0
- li r5,0
- lwz r6,ENTRY_R6_LOWER(r10)
- lis r7,(64*1024*1024)@h
- li r8,0
- li r9,0
-
- /* load up the pir */
- lwz r0,ENTRY_PIR(r10)
- mtspr SPRN_PIR,r0
- mfspr r0,SPRN_PIR
- stw r0,ENTRY_PIR(r10)
-
- mtspr IVPR,r12
-/*
- * Coming here, we know the cpu has one TLB mapping in TLB1[0]
- * which maps 0xfffff000-0xffffffff one-to-one. We set up a
- * second mapping that maps addr 1:1 for 64M, and then we jump to
- * addr
- */
- lis r10,(MAS0_TLBSEL(1)|MAS0_ESEL(0))@h
- mtspr SPRN_MAS0,r10
- lis r10,(MAS1_VALID|MAS1_IPROT)@h
- ori r10,r10,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
- mtspr SPRN_MAS1,r10
- /* WIMGE = 0b00000 for now */
- mtspr SPRN_MAS2,r12
- ori r12,r12,(MAS3_SX|MAS3_SW|MAS3_SR)
- mtspr SPRN_MAS3,r12
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr SPRN_MAS7,r11
-#endif
- tlbwe
-
-/* Now we have another mapping for this page, so we jump to that
- * mapping
- */
- mtspr SPRN_SRR1,r13
- rfi
-
- /*
- * Allocate some space for the SDRAM address of the bootpg.
- * This variable has to be in the boot page so that it can
- * be accessed by secondary cores when they come out of reset.
- */
- .globl __bootpg_addr
-__bootpg_addr:
- .long 0
-
- .align L1_CACHE_SHIFT
- .globl __spin_table
-__spin_table:
- .space CONFIG_MAX_CPUS*ENTRY_SIZE
-
- /* Fill in the empty space. The actual reset vector is
- * the last word of the page */
-__secondary_start_code_end:
- .space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
- b __secondary_start_page
diff --git a/cpu/mpc85xx/resetvec.S b/cpu/mpc85xx/resetvec.S
deleted file mode 100644
index 29555d4..0000000
--- a/cpu/mpc85xx/resetvec.S
+++ /dev/null
@@ -1,2 +0,0 @@
- .section .resetvec,"ax"
- b _start_e500
diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c
deleted file mode 100644
index 2dab212..0000000
--- a/cpu/mpc85xx/serial_scc.c
+++ /dev/null
@@ -1,268 +0,0 @@
-/*
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao (X.Xiao@motorola.com)
- * Modified based on 8260 for 8560.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00.
- */
-
-/*
- * Minimal serial functions needed to use one of the SCC ports
- * as serial console interface.
- */
-
-#include <common.h>
-#include <asm/cpm_85xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONS_ON_SCC)
-
-#if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */
-
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CMXSCR_MASK (CMXSCR_GR1|CMXSCR_SC1|\
- CMXSCR_RS1CS_MSK|CMXSCR_TS1CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS1CS_BRG1|CMXSCR_TS1CS_BRG1)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC1_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC1_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 2 /* Console on SCC2 */
-
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CMXSCR_MASK (CMXSCR_GR2|CMXSCR_SC2|\
- CMXSCR_RS2CS_MSK|CMXSCR_TS2CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS2CS_BRG2|CMXSCR_TS2CS_BRG2)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC2_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC2_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 3 /* Console on SCC3 */
-
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CMXSCR_MASK (CMXSCR_GR3|CMXSCR_SC3|\
- CMXSCR_RS3CS_MSK|CMXSCR_TS3CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS3CS_BRG3|CMXSCR_TS3CS_BRG3)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC3_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC3_SBLOCK
-
-#elif CONFIG_CONS_INDEX == 4 /* Console on SCC4 */
-
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CMXSCR_MASK (CMXSCR_GR4|CMXSCR_SC4|\
- CMXSCR_RS4CS_MSK|CMXSCR_TS4CS_MSK)
-#define CMXSCR_VALUE (CMXSCR_RS4CS_BRG4|CMXSCR_TS4CS_BRG4)
-#define CPM_CR_SCC_PAGE CPM_CR_SCC4_PAGE
-#define CPM_CR_SCC_SBLOCK CPM_CR_SCC4_SBLOCK
-
-#else
-
-#error "console not correctly defined"
-
-#endif
-
-int serial_init (void)
-{
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- volatile ccsr_cpm_scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile ccsr_cpm_cp_t *cp = &(cpm->im_cpm_cp);
- uint dpaddr;
-
- /* initialize pointers to SCC */
-
- sp = (ccsr_cpm_scc_t *) &(cpm->im_cpm_scc[SCC_INDEX]);
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
-
- /* Disable transmitter/receiver.
- */
- sp->gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /* put the SCC channel into NMSI (non multiplexd serial interface)
- * mode and wire the selected SCC Tx and Rx clocks to BRGx (15-15).
- */
- cpm->im_cpm_mux.cmxscr = \
- (cpm->im_cpm_mux.cmxscr&~CMXSCR_MASK)|CMXSCR_VALUE;
-
- /* Set up the baud rate generator.
- */
- serial_setbrg ();
-
- /* Allocate space for two buffer descriptors in the DP ram.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- dpaddr = m8560_cpm_dpalloc((2 * sizeof (cbd_t)) + 2, 16);
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
- rbdf = (cbd_t *)&(cpm->im_dprambase[dpaddr]);
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = BD_SC_WRAP;
-
- /* Set up the uart parameters in the parameter ram.
- */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
- up->scc_genscc.scc_rfcr = CPMFCR_EB;
- up->scc_genscc.scc_tfcr = CPMFCR_EB;
- up->scc_genscc.scc_mrblr = 1;
- up->scc_maxidl = 0;
- up->scc_brkcr = 1;
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = up->scc_char2 = up->scc_char3 = up->scc_char4 = 0x8000;
- up->scc_char5 = up->scc_char6 = up->scc_char7 = up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->sccm = 0;
- sp->scce = 0xffff;
-
- /* Set 8 bit FIFO, 16 bit oversampling and UART mode.
- */
- sp->gsmrh = SCC_GSMRH_RFW; /* 8 bit FIFO */
- sp->gsmrl = \
- SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16 | SCC_GSMRL_MODE_UART;
-
- /* Set CTS no flow control, 1 stop bit, 8 bit character length,
- * normal async UART mode, no parity
- */
- sp->psmr = SCU_PSMR_CL;
-
- /* execute the "Init Rx and Tx params" CP command.
- */
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cpcr = mk_cr_cmd(CPM_CR_SCC_PAGE, CPM_CR_SCC_SBLOCK,
- 0, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver.
- */
- sp->gsmrl |= SCC_GSMRL_ENR | SCC_GSMRL_ENT;
-
- return (0);
-}
-
-void
-serial_setbrg (void)
-{
-#if defined(CONFIG_CONS_USE_EXTC)
- m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate,
- CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL);
-#else
- m8560_cpm_setbrg(SCC_INDEX, gd->baudrate);
-#endif
-}
-
-void
-serial_putc(const char c)
-{
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- if (c == '\n')
- serial_putc ('\r');
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- tbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_tbase]);
-
- /* Wait for last character to go.
- */
- while (tbdf->cbd_sc & BD_SC_READY)
- ;
-
- /* Load the character into the transmit buffer.
- */
- *(volatile char *)tbdf->cbd_bufaddr = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int
-serial_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- unsigned char c;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- /* Wait for character to show up.
- */
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- ;
-
- /* Grab the char and clear the buffer again.
- */
- c = *(volatile unsigned char *)rbdf->cbd_bufaddr;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return (c);
-}
-
-int
-serial_tstc()
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
-
- up = (scc_uart_t *)&(cpm->im_dprambase[PROFF_SCC]);
- rbdf = (cbd_t *)&(cpm->im_dprambase[up->scc_genscc.scc_rbase]);
-
- return ((rbdf->cbd_sc & BD_SC_EMPTY) == 0);
-}
-
-#endif /* CONFIG_CONS_ON_SCC */
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
deleted file mode 100644
index 268edbc..0000000
--- a/cpu/mpc85xx/speed.c
+++ /dev/null
@@ -1,283 +0,0 @@
-/*
- * Copyright 2004, 2007-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2003 Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* --------------------------------------------------------------- */
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_FSL_CORENET
- volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
-
- const u8 core_cplx_PLL[16] = {
- [ 0] = 0, /* CC1 PPL / 1 */
- [ 1] = 0, /* CC1 PPL / 2 */
- [ 2] = 0, /* CC1 PPL / 4 */
- [ 4] = 1, /* CC2 PPL / 1 */
- [ 5] = 1, /* CC2 PPL / 2 */
- [ 6] = 1, /* CC2 PPL / 4 */
- [ 8] = 2, /* CC3 PPL / 1 */
- [ 9] = 2, /* CC3 PPL / 2 */
- [10] = 2, /* CC3 PPL / 4 */
- [12] = 3, /* CC4 PPL / 1 */
- [13] = 3, /* CC4 PPL / 2 */
- [14] = 3, /* CC4 PPL / 4 */
- };
-
- const u8 core_cplx_PLL_div[16] = {
- [ 0] = 1, /* CC1 PPL / 1 */
- [ 1] = 2, /* CC1 PPL / 2 */
- [ 2] = 4, /* CC1 PPL / 4 */
- [ 4] = 1, /* CC2 PPL / 1 */
- [ 5] = 2, /* CC2 PPL / 2 */
- [ 6] = 4, /* CC2 PPL / 4 */
- [ 8] = 1, /* CC3 PPL / 1 */
- [ 9] = 2, /* CC3 PPL / 2 */
- [10] = 4, /* CC3 PPL / 4 */
- [12] = 1, /* CC4 PPL / 1 */
- [13] = 2, /* CC4 PPL / 2 */
- [14] = 4, /* CC4 PPL / 4 */
- };
- uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
- unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
-
- sysInfo->freqSystemBus = sysclk;
- sysInfo->freqDDRBus = sysclk;
- freqCC_PLL[0] = sysclk;
- freqCC_PLL[1] = sysclk;
- freqCC_PLL[2] = sysclk;
- freqCC_PLL[3] = sysclk;
-
- sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
- sysInfo->freqDDRBus *= ((in_be32(&gur->rcwsr[0]) >> 17) & 0x1f);
- freqCC_PLL[0] *= (in_be32(&clk->pllc1gsr) >> 1) & 0x3f;
- freqCC_PLL[1] *= (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
- freqCC_PLL[2] *= (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
- freqCC_PLL[3] *= (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
-
- rcw_tmp = in_be32(&gur->rcwsr[3]);
- for (i = 0; i < cpu_numcores(); i++) {
- u32 c_pll_sel = (in_be32(&clk->clkc0csr + i*8) >> 27) & 0xf;
- u32 cplx_pll = core_cplx_PLL[c_pll_sel];
-
- sysInfo->freqProcessor[i] =
- freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
- }
-
-#define PME_CLK_SEL 0x80000000
-#define FM1_CLK_SEL 0x40000000
-#define FM2_CLK_SEL 0x20000000
- rcw_tmp = in_be32(&gur->rcwsr[7]);
-
-#ifdef CONFIG_SYS_DPAA_PME
- if (rcw_tmp & PME_CLK_SEL)
- sysInfo->freqPME = freqCC_PLL[2] / 2;
- else
- sysInfo->freqPME = sysInfo->freqSystemBus / 2;
-#endif
-
-#ifdef CONFIG_SYS_DPAA_FMAN
- if (rcw_tmp & FM1_CLK_SEL)
- sysInfo->freqFMan[0] = freqCC_PLL[2] / 2;
- else
- sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
-#if (CONFIG_SYS_NUM_FMAN) == 2
- if (rcw_tmp & FM2_CLK_SEL)
- sysInfo->freqFMan[1] = freqCC_PLL[2] / 2;
- else
- sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
-#endif
-#endif
-
-#else
- uint plat_ratio,e500_ratio,half_freqSystemBus;
- uint lcrr_div;
- int i;
-#ifdef CONFIG_QE
- u32 qe_ratio;
-#endif
-
- plat_ratio = (gur->porpllsr) & 0x0000003e;
- plat_ratio >>= 1;
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
-
- /* Divide before multiply to avoid integer
- * overflow for processor speeds above 2GHz */
- half_freqSystemBus = sysInfo->freqSystemBus/2;
- for (i = 0; i < cpu_numcores(); i++) {
- e500_ratio = ((gur->porpllsr) >> (i * 8 + 16)) & 0x3f;
- sysInfo->freqProcessor[i] = e500_ratio * half_freqSystemBus;
- }
-
- /* Note: freqDDRBus is the MCLK frequency, not the data rate. */
- sysInfo->freqDDRBus = sysInfo->freqSystemBus;
-
-#ifdef CONFIG_DDR_CLK_FREQ
- {
- u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
- >> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
- if (ddr_ratio != 0x7)
- sysInfo->freqDDRBus = ddr_ratio * CONFIG_DDR_CLK_FREQ;
- }
-#endif
-#endif
-
-#ifdef CONFIG_QE
- qe_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_QE_RATIO)
- >> MPC85xx_PORPLLSR_QE_RATIO_SHIFT;
- sysInfo->freqQE = qe_ratio * CONFIG_SYS_CLK_FREQ;
-#endif
-
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- {
- volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
- lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
- }
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-#if defined(CONFIG_FSL_CORENET)
- /* If this is corenet based SoC, bit-representation
- * for four times the clock divider values.
- */
- lcrr_div *= 4;
-#elif !defined(CONFIG_MPC8540) && !defined(CONFIG_MPC8541) && \
- !defined(CONFIG_MPC8555) && !defined(CONFIG_MPC8560)
- /*
- * Yes, the entire PQ38 family use the same
- * bit-representation for twice the clock divider values.
- */
- lcrr_div *= 2;
-#endif
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / lcrr_div;
- } else {
- /* In case anyone cares what the unknown value is */
- sysInfo->freqLocalBus = lcrr_div;
- }
-}
-
-
-int get_clocks (void)
-{
- sys_info_t sys_info;
-#ifdef CONFIG_MPC8544
- volatile ccsr_gur_t *gur = (void *) CONFIG_SYS_MPC85xx_GUTS_ADDR;
-#endif
-#if defined(CONFIG_CPM2)
- volatile ccsr_cpm_t *cpm = (ccsr_cpm_t *)CONFIG_SYS_MPC85xx_CPM_ADDR;
- uint sccr, dfbrg;
-
- /* set VCO = 4 * BRG */
- cpm->im_cpm_intctl.sccr &= 0xfffffffc;
- sccr = cpm->im_cpm_intctl.sccr;
- dfbrg = (sccr & SCCR_DFBRG_MSK) >> SCCR_DFBRG_SHIFT;
-#endif
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor[0];
- gd->bus_clk = sys_info.freqSystemBus;
- gd->mem_clk = sys_info.freqDDRBus;
- gd->lbc_clk = sys_info.freqLocalBus;
-
-#ifdef CONFIG_QE
- gd->qe_clk = sys_info.freqQE;
- gd->brg_clk = gd->qe_clk / 2;
-#endif
- /*
- * The base clock for I2C depends on the actual SOC. Unfortunately,
- * there is no pattern that can be used to determine the frequency, so
- * the only choice is to look up the actual SOC number and use the value
- * for that SOC. This information is taken from application note
- * AN2919.
- */
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
- defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
- gd->i2c1_clk = sys_info.freqSystemBus;
-#elif defined(CONFIG_MPC8544)
- /*
- * On the 8544, the I2C clock is the same as the SEC clock. This can be
- * either CCB/2 or CCB/3, depending on the value of cfg_sec_freq. See
- * 4.4.3.3 of the 8544 RM. Note that this might actually work for all
- * 85xx, but only the 8544 has cfg_sec_freq, so it's unknown if the
- * PORDEVSR2_SEC_CFG bit is 0 on all 85xx boards that are not an 8544.
- */
- if (gur->pordevsr2 & MPC85xx_PORDEVSR2_SEC_CFG)
- gd->i2c1_clk = sys_info.freqSystemBus / 3;
- else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#else
- /* Most 85xx SOCs use CCB/2, so this is the default behavior. */
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#endif
- gd->i2c2_clk = gd->i2c1_clk;
-
-#if defined(CONFIG_FSL_ESDHC)
-#ifdef CONFIG_MPC8569
- gd->sdhc_clk = gd->bus_clk;
-#else
- gd->sdhc_clk = gd->bus_clk / 2;
-#endif
-#endif /* defined(CONFIG_FSL_ESDHC) */
-
-#if defined(CONFIG_CPM2)
- gd->vco_out = 2*sys_info.freqSystemBus;
- gd->cpm_clk = gd->vco_out / 2;
- gd->scc_clk = gd->vco_out / 4;
- gd->brg_clk = gd->vco_out / (1 << (2 * (dfbrg + 1)));
-#endif
-
- if(gd->cpu_clk != 0) return (0);
- else return (1);
-}
-
-
-/********************************************
- * get_bus_freq
- * return system bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- return gd->bus_clk;
-}
-
-/********************************************
- * get_ddr_freq
- * return ddr bus freq in Hz
- *********************************************/
-ulong get_ddr_freq (ulong dummy)
-{
- return gd->mem_clk;
-}
diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S
deleted file mode 100644
index b3cb56a..0000000
--- a/cpu/mpc85xx/start.S
+++ /dev/null
@@ -1,1195 +0,0 @@
-/*
- * Copyright 2004, 2007-2010 Freescale Semiconductor, Inc.
- * Copyright (C) 2003 Motorola,Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot Startup Code for Motorola 85xx PowerPC based Embedded Boards
- *
- * The processor starts at 0xfffffffc and the code is first executed in the
- * last 4K page(0xfffff000-0xffffffff) in flash/rom.
- *
- */
-
-#include <config.h>
-#include <mpc85xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
-#ifndef CONFIG_NAND_SPL
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-#endif
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * e500 Startup -- after reset only the last 4KB of the effective
- * address space is mapped in the MMU L2 TLB1 Entry0. The .bootpg
- * section is located at THIS LAST page and basically does three
- * things: clear some registers, set up exception tables and
- * add more TLB entries for 'larger spaces'(e.g. the boot rom) to
- * continue the boot procedure.
-
- * Once the boot rom is mapped by TLB entries we can proceed
- * with normal startup.
- *
- */
-
- .section .bootpg,"ax"
- .globl _start_e500
-
-_start_e500:
-
-/* clear registers/arrays not reset by hardware */
-
- /* L1 */
- li r0,2
- mtspr L1CSR0,r0 /* invalidate d-cache */
- mtspr L1CSR1,r0 /* invalidate i-cache */
-
- mfspr r1,DBSR
- mtspr DBSR,r1 /* Clear all valid bits */
-
- /*
- * Enable L1 Caches early
- *
- */
-
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
- /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
- li r2,(32 + 0)
- mtspr L1CSR2,r2
-#endif
-
- /* Enable/invalidate the I-Cache */
- lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h
- ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l
- mtspr SPRN_L1CSR1,r2
-1:
- mfspr r3,SPRN_L1CSR1
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h
- ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l
- mtspr SPRN_L1CSR1,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR1
- andi. r1,r3,L1CSR1_ICE@l
- beq 2b
-
- /* Enable/invalidate the D-Cache */
- lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h
- ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l
- mtspr SPRN_L1CSR0,r2
-1:
- mfspr r3,SPRN_L1CSR0
- and. r1,r3,r2
- bne 1b
-
- lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h
- ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l
- mtspr SPRN_L1CSR0,r3
- isync
-2:
- mfspr r3,SPRN_L1CSR0
- andi. r1,r3,L1CSR0_DCE@l
- beq 2b
-
- /* Setup interrupt vectors */
- lis r1,TEXT_BASE@h
- mtspr IVPR,r1
-
- li r1,0x0100
- mtspr IVOR0,r1 /* 0: Critical input */
- li r1,0x0200
- mtspr IVOR1,r1 /* 1: Machine check */
- li r1,0x0300
- mtspr IVOR2,r1 /* 2: Data storage */
- li r1,0x0400
- mtspr IVOR3,r1 /* 3: Instruction storage */
- li r1,0x0500
- mtspr IVOR4,r1 /* 4: External interrupt */
- li r1,0x0600
- mtspr IVOR5,r1 /* 5: Alignment */
- li r1,0x0700
- mtspr IVOR6,r1 /* 6: Program check */
- li r1,0x0800
- mtspr IVOR7,r1 /* 7: floating point unavailable */
- li r1,0x0900
- mtspr IVOR8,r1 /* 8: System call */
- /* 9: Auxiliary processor unavailable(unsupported) */
- li r1,0x0a00
- mtspr IVOR10,r1 /* 10: Decrementer */
- li r1,0x0b00
- mtspr IVOR11,r1 /* 11: Interval timer */
- li r1,0x0c00
- mtspr IVOR12,r1 /* 12: Watchdog timer */
- li r1,0x0d00
- mtspr IVOR13,r1 /* 13: Data TLB error */
- li r1,0x0e00
- mtspr IVOR14,r1 /* 14: Instruction TLB error */
- li r1,0x0f00
- mtspr IVOR15,r1 /* 15: Debug */
-
- /* Clear and set up some registers. */
- li r0,0x0000
- lis r1,0xffff
- mtspr DEC,r0 /* prevent dec exceptions */
- mttbl r0 /* prevent fit & wdt exceptions */
- mttbu r0
- mtspr TSR,r1 /* clear all timer exception status */
- mtspr TCR,r0 /* disable all */
- mtspr ESR,r0 /* clear exception syndrome register */
- mtspr MCSR,r0 /* machine check syndrome register */
- mtxer r0 /* clear integer exception register */
-
-#ifdef CONFIG_SYS_BOOK3E_HV
- mtspr MAS8,r0 /* make sure MAS8 is clear */
-#endif
-
- /* Enable Time Base and Select Time Base Clock */
- lis r0,HID0_EMCP@h /* Enable machine check */
-#if defined(CONFIG_ENABLE_36BIT_PHYS)
- ori r0,r0,HID0_ENMAS7@l /* Enable MAS7 */
-#endif
-#ifndef CONFIG_E500MC
- ori r0,r0,HID0_TBEN@l /* Enable Timebase */
-#endif
- mtspr HID0,r0
-
-#ifndef CONFIG_E500MC
- li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */
- mfspr r3,PVR
- andi. r3,r3, 0xff
- cmpwi r3,0x50@l /* if we are rev 5.0 or greater set MBDD */
- blt 1f
- /* Set MBDD bit also */
- ori r0, r0, HID1_MBDD@l
-1:
- mtspr HID1,r0
-#endif
-
- /* Enable Branch Prediction */
-#if defined(CONFIG_BTB)
- lis r0,BUCSR_ENABLE@h
- ori r0,r0,BUCSR_ENABLE@l
- mtspr SPRN_BUCSR,r0
-#endif
-
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h /* DBCR0[IDM] must be set */
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr DBCR0,r0
-#endif
-
-#ifdef CONFIG_MPC8569
-#define CONFIG_SYS_LBC_ADDR (CONFIG_SYS_CCSRBAR_DEFAULT + 0x5000)
-#define CONFIG_SYS_LBCR_ADDR (CONFIG_SYS_LBC_ADDR + 0xd0)
-
- /* MPC8569 Rev.0 silcon needs to set bit 13 of LBCR to allow elBC to
- * use address space which is more than 12bits, and it must be done in
- * the 4K boot page. So we set this bit here.
- */
-
- /* create a temp mapping TLB0[0] for LBCR */
- lis r6,FSL_BOOKE_MAS0(0, 0, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
- (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- /* Set LBCR register */
- lis r4,CONFIG_SYS_LBCR_ADDR@h
- ori r4,r4,CONFIG_SYS_LBCR_ADDR@l
-
- lis r5,CONFIG_SYS_LBC_LBCR@h
- ori r5,r5,CONFIG_SYS_LBC_LBCR@l
- stw r5,0(r4)
- isync
-
- /* invalidate this temp TLB */
- lis r4,CONFIG_SYS_LBC_ADDR@h
- ori r4,r4,CONFIG_SYS_LBC_ADDR@l
- tlbivax 0,r4
- isync
-
-#endif /* CONFIG_MPC8569 */
-
- lis r6,FSL_BOOKE_MAS0(1, 15, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 15, 0)@l
-
-#ifndef CONFIG_SYS_RAMBOOT
- /* create a temp mapping in AS=1 to the 4M boot window */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
-
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
- /* The 85xx has the default boot window 0xff800000 - 0xffffffff */
- lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-#else
- /*
- * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
- * image has been relocated to TEXT_BASE on the second stage.
- */
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
-
- lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-#endif
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- /* create a temp mapping in AS=1 to the stack */
- lis r6,FSL_BOOKE_MAS0(1, 14, 0)@h
- ori r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
- lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
- ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
- lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
- ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
- lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-
- mtspr MAS0,r6
- mtspr MAS1,r7
- mtspr MAS2,r8
- mtspr MAS3,r9
- isync
- msync
- tlbwe
-
- lis r6,MSR_IS|MSR_DS@h
- ori r6,r6,MSR_IS|MSR_DS@l
- lis r7,switch_as@h
- ori r7,r7,switch_as@l
-
- mtspr SPRN_SRR0,r7
- mtspr SPRN_SRR1,r6
- rfi
-
-switch_as:
-/* L1 DCache is used for initial RAM */
-
- /* Allocate Initial RAM in data cache.
- */
- lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- mfspr r2, L1CFG0
- andi. r2, r2, 0x1ff
- /* cache size * 1024 / (2 * L1 line size) */
- slwi r2, r2, (10 - 1 - L1_CACHE_SHIFT)
- mtctr r2
- li r0,0
-1:
- dcbz r0,r3
- dcbtls 0,r0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
-
- /* Jump out the last 4K page and continue to 'normal' start */
-#ifdef CONFIG_SYS_RAMBOOT
- b _start_cont
-#else
- /* Calculate absolute address in FLASH and jump there */
- /*--------------------------------------------------------------*/
- lis r3,CONFIG_SYS_MONITOR_BASE@h
- ori r3,r3,CONFIG_SYS_MONITOR_BASE@l
- addi r3,r3,_start_cont - _start + _START_OFFSET
- mtlr r3
- blr
-#endif
-
- .text
- .globl _start
-_start:
- .long 0x27051956 /* U-BOOT Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- .align 4
- .globl _start_cont
-_start_cont:
- /* Setup the stack in initial RAM,could be L2-as-SRAM or L1 dcache*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
-
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0,RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
- GET_GOT
- bl cpu_init_early_f
-
- /* switch back to AS = 0 */
- lis r3,(MSR_CE|MSR_ME|MSR_DE)@h
- ori r3,r3,(MSR_CE|MSR_ME|MSR_DE)@l
- mtmsr r3
- isync
-
- bl cpu_init_f
- bl board_init_f
- isync
-
-#ifndef CONFIG_NAND_SPL
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x0100, CriticalInput, CritcalInputException)
-
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x0300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x0400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x0500, ExtInterrupt, ExtIntException)
-
-/* Alignment exception. */
- . = 0x0600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x0700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC85xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x0800, FPUnavailable, UnknownException)
-
- . = 0x0900
-/*
- * r0 - SYSCALL number
- * r3-... arguments
- */
-SystemCall:
- addis r11,r0,0 /* get functions table addr */
- ori r11,r11,0 /* Note: this code is patched in trap_init */
- addis r12,r0,0 /* get number of functions */
- ori r12,r12,0
-
- cmplw 0,r0,r12
- bge 1f
-
- rlwinm r0,r0,2,0,31 /* fn_addr = fn_tbl[r0] */
- add r11,r11,r0
- lwz r11,0(r11)
-
- li r20,0xd00-4 /* Get stack pointer */
- lwz r12,0(r20)
- subi r12,r12,12 /* Adjust stack pointer */
- li r0,0xc00+_end_back-SystemCall
- cmplw 0,r0,r12 /* Check stack overflow */
- bgt 1f
- stw r12,0(r20)
-
- mflr r0
- stw r0,0(r12)
- mfspr r0,SRR0
- stw r0,4(r12)
- mfspr r0,SRR1
- stw r0,8(r12)
-
- li r12,0xc00+_back-SystemCall
- mtlr r12
- mtspr SRR0,r11
-
-1: SYNC
- rfi
-_back:
-
- mfmsr r11 /* Disable interrupts */
- li r12,0
- ori r12,r12,MSR_EE
- andc r11,r11,r12
- SYNC /* Some chip revs need this... */
- mtmsr r11
- SYNC
-
- li r12,0xd00-4 /* restore regs */
- lwz r12,0(r12)
-
- lwz r11,0(r12)
- mtlr r11
- lwz r11,4(r12)
- mtspr SRR0,r11
- lwz r11,8(r12)
- mtspr SRR1,r11
-
- addi r12,r12,12 /* Adjust stack pointer */
- li r20,0xd00-4
- stw r12,0(r20)
-
- SYNC
- rfi
-_end_back:
-
- STD_EXCEPTION(0x0a00, Decrementer, timer_interrupt)
- STD_EXCEPTION(0x0b00, IntervalTimer, UnknownException)
- STD_EXCEPTION(0x0c00, WatchdogTimer, UnknownException)
-
- STD_EXCEPTION(0x0d00, DataTLBError, UnknownException)
- STD_EXCEPTION(0x0e00, InstructionTLBError, UnknownException)
-
- CRIT_EXCEPTION(0x0f00, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = . + (0x100 - ( . & 0xff )) /* align for debug */
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
-
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
-
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-
-/* Cache functions.
-*/
-.globl invalidate_icache
-invalidate_icache:
- mfspr r0,L1CSR1
- ori r0,r0,L1CSR1_ICFI
- msync
- isync
- mtspr L1CSR1,r0
- isync
- blr /* entire I cache */
-
-.globl invalidate_dcache
-invalidate_dcache:
- mfspr r0,L1CSR0
- ori r0,r0,L1CSR0_DCFI
- msync
- isync
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl icache_enable
-icache_enable:
- mflr r8
- bl invalidate_icache
- mtlr r8
- isync
- mfspr r4,L1CSR1
- ori r4,r4,0x0001
- oris r4,r4,0x0001
- mtspr L1CSR1,r4
- isync
- blr
-
- .globl icache_disable
-icache_disable:
- mfspr r0,L1CSR1
- lis r3,0
- ori r3,r3,L1CSR1_ICE
- andc r0,r0,r3
- mtspr L1CSR1,r0
- isync
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3,L1CSR1
- andi. r3,r3,L1CSR1_ICE
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
- bl invalidate_dcache
- mtlr r8
- isync
- mfspr r0,L1CSR0
- ori r0,r0,0x0001
- oris r0,r0,0x0001
- msync
- isync
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl dcache_disable
-dcache_disable:
- mfspr r3,L1CSR0
- lis r4,0
- ori r4,r4,L1CSR0_DCE
- andc r3,r3,r4
- mtspr L1CSR0,r0
- isync
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3,L1CSR0
- andi. r3,r3,L1CSR0_DCE
- blr
-
- .globl get_pir
-get_pir:
- mfspr r3,PIR
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3,PVR
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3,SVR
- blr
-
- .globl wr_tcr
-wr_tcr:
- mtspr TCR,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- sync
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-#endif /* !CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void write_tlb(mas0, mas1, mas2, mas3, mas7)
- */
- .globl write_tlb
-write_tlb:
- mtspr MAS0,r3
- mtspr MAS1,r4
- mtspr MAS2,r5
- mtspr MAS3,r6
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr MAS7,r7
-#endif
- li r3,0
-#ifdef CONFIG_SYS_BOOK3E_HV
- mtspr MAS8,r3
-#endif
- isync
- tlbwe
- msync
- isync
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1,r3 /* Set new stack pointer */
- mr r9,r4 /* Save copy of Init Data pointer */
- mr r10,r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3,r5 /* Destination Address */
- lis r4,CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4,r4,CONFIG_SYS_MONITOR_BASE@l
- lwz r5,GOT(__init_end)
- sub r5,r5,r4
- li r6,CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15,r10,r4
-
- /* First our own GOT */
- add r12,r12,r15
- /* the the one used by the C code */
- add r30,r30,r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
- /*
- * Re-point the IVPR at RAM
- */
- mtspr IVPR,r10
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0,r10,in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
- .globl in_ram
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0,r3,r4
- beq 6f
-
- li r0,0
-5:
- stw r0,0(r3)
- addi r3,r3,4
- cmplw 0,r3,r4
- bne 5b
-6:
-
- mr r3,r9 /* Init Data pointer */
- mr r4,r10 /* Destination Address */
- bl board_init_r
-
-#ifndef CONFIG_NAND_SPL
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7,GOT(_start_of_vectors)
- lwz r8,GOT(_end_of_vectors)
-
- li r9,0x100 /* reset vector always at 0x100 */
-
- cmplw 0,r7,r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0,0(r7)
- stw r0,0(r9)
- addi r7,r7,4
- addi r9,r9,4
- cmplw 0,r7,r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7,.L_CriticalInput - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_MachineCheck - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_DataStorage - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_InstStorage - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_ExtInterrupt - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_Alignment - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
- li r7,.L_IntervalTimer - _start + _START_OFFSET
- li r8,_end_of_vectors - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7,r7,0x100 /* next exception vector */
- cmplw 0,r7,r8
- blt 2b
-
- lis r7,0x0
- mtspr IVPR,r7
-
- mtlr r4 /* restore link register */
- blr
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@h
- ori r3,r3,(CONFIG_SYS_INIT_RAM_ADDR & ~(CONFIG_SYS_CACHELINE_SIZE-1))@l
- mfspr r4,L1CFG0
- andi. r4,r4,0x1ff
- slwi r4,r4,(10 - 1 - L1_CACHE_SHIFT)
- mtctr r4
-1: dcbi r0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync
-
- /* Invalidate the TLB entries for the cache */
- lis r3,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- addi r3,r3,0x1000
- tlbivax 0,r3
- isync
- blr
-
-.globl flush_dcache
-flush_dcache:
- mfspr r3,SPRN_L1CFG0
-
- rlwinm r5,r3,9,3 /* Extract cache block size */
- twlgti r5,1 /* Only 32 and 64 byte cache blocks
- * are currently defined.
- */
- li r4,32
- subfic r6,r5,2 /* r6 = log2(1KiB / cache block size) -
- * log2(number of ways)
- */
- slw r5,r4,r5 /* r5 = cache block size */
-
- rlwinm r7,r3,0,0xff /* Extract number of KiB in the cache */
- mulli r7,r7,13 /* An 8-way cache will require 13
- * loads per set.
- */
- slw r7,r7,r6
-
- /* save off HID0 and set DCFA */
- mfspr r8,SPRN_HID0
- ori r9,r8,HID0_DCFA@l
- mtspr SPRN_HID0,r9
- isync
-
- lis r4,0
- mtctr r7
-
-1: lwz r3,0(r4) /* Load... */
- add r4,r4,r5
- bdnz 1b
-
- msync
- lis r4,0
- mtctr r7
-
-1: dcbf 0,r4 /* ...and flush. */
- add r4,r4,r5
- bdnz 1b
-
- /* restore HID0 */
- mtspr SPRN_HID0,r8
- isync
-
- blr
-
-.globl setup_ivors
-setup_ivors:
-
-#include "fixed_ivor.S"
- blr
-#endif /* !CONFIG_NAND_SPL */
diff --git a/cpu/mpc85xx/tlb.c b/cpu/mpc85xx/tlb.c
deleted file mode 100644
index b3037ac..0000000
--- a/cpu/mpc85xx/tlb.c
+++ /dev/null
@@ -1,277 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#ifdef CONFIG_ADDR_MAP
-#include <addr_map.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void invalidate_tlb(u8 tlb)
-{
- if (tlb == 0)
- mtspr(MMUCSR0, 0x4);
- if (tlb == 1)
- mtspr(MMUCSR0, 0x2);
-}
-
-void init_tlbs(void)
-{
- int i;
-
- for (i = 0; i < num_tlb_entries; i++) {
- write_tlb(tlb_table[i].mas0,
- tlb_table[i].mas1,
- tlb_table[i].mas2,
- tlb_table[i].mas3,
- tlb_table[i].mas7);
- }
-
- return ;
-}
-
-#ifndef CONFIG_NAND_SPL
-static inline void use_tlb_cam(u8 idx)
-{
- int i = idx / 32;
- int bit = idx % 32;
-
- gd->used_tlb_cams[i] |= (1 << bit);
-}
-
-static inline void free_tlb_cam(u8 idx)
-{
- int i = idx / 32;
- int bit = idx % 32;
-
- gd->used_tlb_cams[i] &= ~(1 << bit);
-}
-
-void init_used_tlb_cams(void)
-{
- int i;
- unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
-
- for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++)
- gd->used_tlb_cams[i] = 0;
-
- /* walk all the entries */
- for (i = 0; i < num_cam; i++) {
- u32 _mas1;
-
- mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
- asm volatile("tlbre;isync");
- _mas1 = mfspr(MAS1);
-
- /* if the entry isn't valid skip it */
- if ((_mas1 & MAS1_VALID))
- use_tlb_cam(i);
- }
-}
-
-int find_free_tlbcam(void)
-{
- int i;
- u32 idx;
-
- for (i = 0; i < ((CONFIG_SYS_NUM_TLBCAMS+31)/32); i++) {
- idx = ffz(gd->used_tlb_cams[i]);
-
- if (idx != 32)
- break;
- }
-
- idx += i * 32;
-
- if (idx >= CONFIG_SYS_NUM_TLBCAMS)
- return -1;
-
- return idx;
-}
-
-void set_tlb(u8 tlb, u32 epn, u64 rpn,
- u8 perms, u8 wimge,
- u8 ts, u8 esel, u8 tsize, u8 iprot)
-{
- u32 _mas0, _mas1, _mas2, _mas3, _mas7;
-
- if (tlb == 1)
- use_tlb_cam(esel);
-
- _mas0 = FSL_BOOKE_MAS0(tlb, esel, 0);
- _mas1 = FSL_BOOKE_MAS1(1, iprot, 0, ts, tsize);
- _mas2 = FSL_BOOKE_MAS2(epn, wimge);
- _mas3 = FSL_BOOKE_MAS3(rpn, 0, perms);
- _mas7 = FSL_BOOKE_MAS7(rpn);
-
- write_tlb(_mas0, _mas1, _mas2, _mas3, _mas7);
-
-#ifdef CONFIG_ADDR_MAP
- if ((tlb == 1) && (gd->flags & GD_FLG_RELOC))
- addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), esel);
-#endif
-}
-
-void disable_tlb(u8 esel)
-{
- u32 _mas0, _mas1, _mas2, _mas3, _mas7;
-
- free_tlb_cam(esel);
-
- _mas0 = FSL_BOOKE_MAS0(1, esel, 0);
- _mas1 = 0;
- _mas2 = 0;
- _mas3 = 0;
- _mas7 = 0;
-
- mtspr(MAS0, _mas0);
- mtspr(MAS1, _mas1);
- mtspr(MAS2, _mas2);
- mtspr(MAS3, _mas3);
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- mtspr(MAS7, _mas7);
-#endif
- asm volatile("isync;msync;tlbwe;isync");
-
-#ifdef CONFIG_ADDR_MAP
- if (gd->flags & GD_FLG_RELOC)
- addrmap_set_entry(0, 0, 0, esel);
-#endif
-}
-
-static void tlbsx (const volatile unsigned *addr)
-{
- __asm__ __volatile__ ("tlbsx 0,%0" : : "r" (addr), "m" (*addr));
-}
-
-/* return -1 if we didn't find anything */
-int find_tlb_idx(void *addr, u8 tlbsel)
-{
- u32 _mas0, _mas1;
-
- /* zero out Search PID, AS */
- mtspr(MAS6, 0);
-
- tlbsx(addr);
-
- _mas0 = mfspr(MAS0);
- _mas1 = mfspr(MAS1);
-
- /* we found something, and its in the TLB we expect */
- if ((MAS1_VALID & _mas1) &&
- (MAS0_TLBSEL(tlbsel) == (_mas0 & MAS0_TLBSEL_MSK))) {
- return ((_mas0 & MAS0_ESEL_MSK) >> 16);
- }
-
- return -1;
-}
-
-#ifdef CONFIG_ADDR_MAP
-void init_addr_map(void)
-{
- int i;
- unsigned int num_cam = mfspr(SPRN_TLB1CFG) & 0xfff;
-
- /* walk all the entries */
- for (i = 0; i < num_cam; i++) {
- unsigned long epn;
- u32 tsize, _mas1;
- phys_addr_t rpn;
-
- mtspr(MAS0, FSL_BOOKE_MAS0(1, i, 0));
-
- asm volatile("tlbre;isync");
- _mas1 = mfspr(MAS1);
-
- /* if the entry isn't valid skip it */
- if (!(_mas1 & MAS1_VALID))
- continue;
-
- tsize = (_mas1 >> 8) & 0xf;
- epn = mfspr(MAS2) & MAS2_EPN;
- rpn = mfspr(MAS3) & MAS3_RPN;
-#ifdef CONFIG_ENABLE_36BIT_PHYS
- rpn |= ((phys_addr_t)mfspr(MAS7)) << 32;
-#endif
-
- addrmap_set_entry(epn, rpn, (1UL << ((tsize * 2) + 10)), i);
- }
-
- return ;
-}
-#endif
-
-unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
-{
- int i;
- unsigned int tlb_size;
- unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
- unsigned int max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf;
- u64 size, memsize = (u64)memsize_in_meg << 20;
-
- size = min(memsize, CONFIG_MAX_MEM_MAPPED);
-
- /* Convert (4^max) kB to (2^max) bytes */
- max_cam = max_cam * 2 + 10;
-
- for (i = 0; size && i < 8; i++) {
- int ram_tlb_index = find_free_tlbcam();
- u32 camsize = __ilog2_u64(size) & ~1U;
- u32 align = __ilog2(ram_tlb_address) & ~1U;
-
- if (ram_tlb_index == -1)
- break;
-
- if (align == -2) align = max_cam;
- if (camsize > align)
- camsize = align;
-
- if (camsize > max_cam)
- camsize = max_cam;
-
- tlb_size = (camsize - 10) / 2;
-
- set_tlb(1, ram_tlb_address, ram_tlb_address,
- MAS3_SX|MAS3_SW|MAS3_SR, 0,
- 0, ram_tlb_index, tlb_size, 1);
-
- size -= 1ULL << camsize;
- memsize -= 1ULL << camsize;
- ram_tlb_address += 1UL << camsize;
- }
-
- if (memsize)
- print_size(memsize, " left unmapped\n");
-
- /*
- * Confirm that the requested amount of memory was mapped.
- */
- return memsize_in_meg;
-}
-#endif /* !CONFIG_NAND_SPL */
diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c
deleted file mode 100644
index 10108d8..0000000
--- a/cpu/mpc85xx/traps.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright 2007 Freescale Semiconductor.
- * Copyright (C) 2003 Motorola
- * Modified by Xianghua Xiao(x.xiao@motorola.com)
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-static __inline__ void set_tsr(unsigned long val)
-{
- asm volatile("mtspr 0x150, %0" : : "r" (val));
-}
-
-static __inline__ unsigned long get_esr(void)
-{
- unsigned long val;
- asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
- return val;
-}
-
-#define ESR_MCI 0x80000000
-#define ESR_PIL 0x08000000
-#define ESR_PPR 0x04000000
-#define ESR_PTR 0x02000000
-#define ESR_DST 0x00800000
-#define ESR_DIZ 0x00400000
-#define ESR_U0F 0x00008000
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-CritcalInputException(struct pt_regs *regs)
-{
- panic("Critical Input Exception");
-}
-
-int machinecheck_count = 0;
-int machinecheck_error = 0;
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
- unsigned int mcsr, mcsrr0, mcsrr1, mcar;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
- mcsrr0 = mfspr(SPRN_MCSRR0);
- mcsrr1 = mfspr(SPRN_MCSRR1);
- mcsr = mfspr(SPRN_MCSR);
- mcar = mfspr(SPRN_MCAR);
-
- machinecheck_count++;
- machinecheck_error=1;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from mcsr): ");
- printf("mcsr = 0x%08x\n", mcsr);
- if (mcsr & 0x80000000)
- printf("Machine check input pin\n");
- if (mcsr & 0x40000000)
- printf("Instruction cache parity error\n");
- if (mcsr & 0x20000000)
- printf("Data cache push parity error\n");
- if (mcsr & 0x10000000)
- printf("Data cache parity error\n");
- if (mcsr & 0x00000080)
- printf("Bus instruction address error\n");
- if (mcsr & 0x00000040)
- printf("Bus Read address error\n");
- if (mcsr & 0x00000020)
- printf("Bus Write address error\n");
- if (mcsr & 0x00000010)
- printf("Bus Instruction data bus error\n");
- if (mcsr & 0x00000008)
- printf("Bus Read data bus error\n");
- if (mcsr & 0x00000004)
- printf("Bus Write bus error\n");
- if (mcsr & 0x00000002)
- printf("Bus Instruction parity error\n");
- if (mcsr & 0x00000001)
- printf("Bus Read parity error\n");
-
- show_regs(regs);
- printf("MCSR=0x%08x \tMCSRR0=0x%08x \nMCSRR1=0x%08x \tMCAR=0x%08x\n",
- mcsr, mcsrr0, mcsrr1, mcar);
- print_backtrace((unsigned long *)regs->gpr[1]);
- if (machinecheck_count > 10) {
- panic("machine check count too high\n");
- }
-
- if (machinecheck_count > 1) {
- regs->nip += 4; /* skip offending instruction */
- printf("Skipping current instr, Returning to 0x%08lx\n",
- regs->nip);
- } else {
- printf("Returning back to 0x%08lx\n",regs->nip);
- }
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- long esr_val;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
-
- esr_val = get_esr();
- if( esr_val & ESR_PIL )
- printf( "** Illegal Instruction **\n" );
- else if( esr_val & ESR_PPR )
- printf( "** Privileged Instruction **\n" );
- else if( esr_val & ESR_PTR )
- printf( "** Trap Instruction **\n" );
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-PITException(struct pt_regs *regs)
-{
- /*
- * Reset PIT interrupt
- */
- set_tsr(0x0c000000);
-
- /*
- * Call timer_interrupt routine in interrupts.c
- */
- timer_interrupt(NULL);
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-ExtIntException(struct pt_regs *regs)
-{
- volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC85xx_PIC_ADDR);
-
- uint vect;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("External Interrupt Exception at PC: %lx, SR: %lx, vector=%lx",
- regs->nip, regs->msr, regs->trap);
- vect = pic->iack0;
- printf(" irq IACK0@%05x=%d\n",(int)&pic->iack0,vect);
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
- return 0;
-}
diff --git a/cpu/mpc85xx/u-boot-nand.lds b/cpu/mpc85xx/u-boot-nand.lds
deleted file mode 100644
index b4c63e2..0000000
--- a/cpu/mpc85xx/u-boot-nand.lds
+++ /dev/null
@@ -1,137 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- .bootpg ADDR(.text) - 0x1000 :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } :text = 0xffff
-
- . = ADDR(.text) + 0x80000;
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc85xx/u-boot-nand_spl.lds b/cpu/mpc85xx/u-boot-nand_spl.lds
deleted file mode 100644
index fef3e42..0000000
--- a/cpu/mpc85xx/u-boot-nand_spl.lds
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * (C) Copyright 2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de
- *
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SECTIONS
-{
- . = 0xfff00000;
- .text : {
- *(.text)
- }
- _etext = .;
-
- .reloc : {
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- . = ALIGN(8);
- .data : {
- *(.rodata*)
- *(.data*)
- *(.sdata*)
- }
- _edata = .;
-
- . = ALIGN(8);
- __init_begin = .;
- __init_end = .;
-
- .resetvec ADDR(.text) + 0xffc : {
- *(.resetvec)
- } = 0xffff
-
- __bss_start = .;
- .bss : {
- *(.sbss)
- *(.bss)
- }
- _end = .;
-}
-ASSERT(__init_end <= 0xfff00ffc, "NAND bootstrap too big");
diff --git a/cpu/mpc85xx/u-boot.lds b/cpu/mpc85xx/u-boot.lds
deleted file mode 100644
index 183dce9..0000000
--- a/cpu/mpc85xx/u-boot.lds
+++ /dev/null
@@ -1,157 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- .bootpg RESET_VECTOR_ADDRESS - 0xffc :
- {
- cpu/mpc85xx/start.o (.bootpg)
- } :text = 0xffff
-
- .resetvec RESET_VECTOR_ADDRESS :
- {
- *(.resetvec)
- } :text = 0xffff
-
- . = RESET_VECTOR_ADDRESS + 0x4;
-
- /*
- * Make sure that the bss segment isn't linked at 0x0, otherwise its
- * address won't be updated during relocation fixups. Note that
- * this is a temporary fix. Code to dynamically the fixup the bss
- * location will be added in the future. When the bss relocation
- * fixup code is present this workaround should be removed.
- */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
- . |= 0x10;
-#endif
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
deleted file mode 100644
index daca79a..0000000
--- a/cpu/mpc86xx/Makefile
+++ /dev/null
@@ -1,63 +0,0 @@
-#
-# Copyright 2007 Freescale Semiconductor, Inc.
-# (C) Copyright 2002,2003 Motorola Inc.
-# Xianghua Xiao,X.Xiao@motorola.com
-#
-# (C) Copyright 2004 Freescale Semiconductor. (MC86xx Port)
-# Jeff Brown
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-
-SOBJS-y += cache.o
-SOBJS-$(CONFIG_MP) += release.o
-
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-# 8610 & 8641 are identical w/regards to DDR
-COBJS-$(CONFIG_MPC8610) += ddr-8641.o
-COBJS-$(CONFIG_MPC8641) += ddr-8641.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-y += interrupts.o
-COBJS-$(CONFIG_MP) += mp.o
-COBJS-y += speed.o
-COBJS-y += traps.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(ASOBJS) $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc86xx/cache.S b/cpu/mpc86xx/cache.S
deleted file mode 100644
index 0bb058b..0000000
--- a/cpu/mpc86xx/cache.S
+++ /dev/null
@@ -1,378 +0,0 @@
-#include <config.h>
-#include <mpc86xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CACHE_LINE_SIZE
-# define CACHE_LINE_SIZE L1_CACHE_BYTES
-#endif
-
-#if CACHE_LINE_SIZE == 128
-#define LG_CACHE_LINE_SIZE 7
-#elif CACHE_LINE_SIZE == 32
-#define LG_CACHE_LINE_SIZE 5
-#elif CACHE_LINE_SIZE == 16
-#define LG_CACHE_LINE_SIZE 4
-#elif CACHE_LINE_SIZE == 8
-#define LG_CACHE_LINE_SIZE 3
-#else
-# error "Invalid cache line size!"
-#endif
-
-/*
- * Most of this code is taken from 74xx_7xx/cache.S
- * and then cleaned up a bit
- */
-
-/*
- * Invalidate L1 instruction cache.
- */
-_GLOBAL(invalidate_l1_instruction_cache)
- /* use invalidate-all bit in HID0 */
- mfspr r3,HID0
- ori r3,r3,HID0_ICFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Invalidate L1 data cache.
- */
-_GLOBAL(invalidate_l1_data_cache)
- mfspr r3,HID0
- ori r3,r3,HID0_DCFI
- mtspr HID0,r3
- isync
- blr
-
-/*
- * Flush data cache.
- */
-_GLOBAL(flush_dcache)
- lis r3,0
- lis r5,CACHE_LINE_SIZE
-flush:
- cmp 0,1,r3,r5
- bge done
- lwz r5,0(r3)
- lis r5,CACHE_LINE_SIZE
- addi r3,r3,0x4
- b flush
-done:
- blr
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- * This is a no-op on the 601.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5 /* align r3 down to cache line */
- subf r4,r3,r4 /* r4 = offset of stop from start of cache line */
- add r4,r4,r5 /* r4 += cache_line_size-1 */
- srwi. r4,r4,LG_CACHE_LINE_SIZE /* r4 = number of cache lines to flush */
- beqlr /* if r4 == 0 return */
- mtctr r4 /* ctr = r4 */
-
- sync
-1: dcbst 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbf 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbf's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,CACHE_LINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,LG_CACHE_LINE_SIZE
- beqlr
- mtctr r4
-
- sync
-1: dcbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * Flush a particular page from the data cache to RAM.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_page_to_ram(void *page)
- */
-_GLOBAL(__flush_page_to_ram)
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
- mr r6,r3
-0: dcbst 0,r3 /* Write line to ram */
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 0b
- sync
- mtctr r4
-1: icbi 0,r6
- addi r6,r6,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Flush a particular page from the instruction cache.
- * Note: this is necessary because the instruction cache does *not*
- * snoop from the data cache.
- *
- * void __flush_icache_page(void *page)
- */
-_GLOBAL(__flush_icache_page)
- li r4,4096/CACHE_LINE_SIZE /* Number of lines in a page */
- mtctr r4
-1: icbi 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- sync
- isync
- blr
-
-/*
- * Clear a page using the dcbz instruction, which doesn't cause any
- * memory traffic (except to write out any cache lines which get
- * displaced). This only works on cacheable memory.
- */
-_GLOBAL(clear_page)
- li r0,4096/CACHE_LINE_SIZE
- mtctr r0
-1: dcbz 0,r3
- addi r3,r3,CACHE_LINE_SIZE
- bdnz 1b
- blr
-
-/*
- * Enable L1 Instruction cache
- */
-_GLOBAL(icache_enable)
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Disable L1 Instruction cache
- */
-_GLOBAL(icache_disable)
- mflr r4
- bl invalidate_l1_instruction_cache /* uses r3 */
- sync
- mtlr r4
- mfspr r3, HID0
- li r5, 0
- ori r5, r5, HID0_ICE
- andc r3, r3, r5
- mtspr HID0, r3
- isync
- blr
-
-/*
- * Is instruction cache enabled?
- */
-_GLOBAL(icache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_ICE
- blr
-
-
-_GLOBAL(l1dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
- blr
-
-/*
- * Enable data cache(s) - L1 and optionally L2
- * Calls l2cache_enable. LR saved in r5
- */
-_GLOBAL(dcache_enable)
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- mflr r5
- bl l2cache_enable /* uses r3 and r4 */
- sync
- mtlr r5
-#endif
- blr
-
-
-/*
- * Disable data cache(s) - L1 and optionally L2
- * Calls flush_dcache and l2cache_disable_no_flush.
- * LR saved in r4
- */
-_GLOBAL(dcache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- li r5, HID0_DCE|HID0_DCFI
- andc r3, r3, r5 /* no enable, no invalidate */
- mtspr HID0, r3
- sync
-#ifdef CONFIG_SYS_L2
- bl l2cache_disable_no_flush /* uses r3 */
-#endif
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Is data cache enabled?
- */
-_GLOBAL(dcache_status)
- mfspr r3, HID0
- andi. r3, r3, HID0_DCE
- blr
-
-/*
- * Invalidate L2 cache using L2I, assume L2 is enabled
- */
-_GLOBAL(l2cache_invalidate)
- mfspr r3, l2cr
- rlwinm. r3, r3, 0, 0, 0
- beq 1f
-
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 1, 31
-
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr l2cr, r3
- sync
-1: mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- mtspr l2cr, r3
-
-invl2:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne invl2
- blr
-
-/*
- * Enable L2 cache
- * Calls l2cache_invalidate. LR is saved in r4
- */
-_GLOBAL(l2cache_enable)
- mflr r4 /* save link register */
- bl l2cache_invalidate /* uses r3 */
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- mtlr r4 /* restore link register */
- blr
-
-/*
- * Disable L2 cache
- * Calls flush_dcache. LR is saved in r4
- */
-_GLOBAL(l2cache_disable)
- mflr r4 /* save link register */
- bl flush_dcache /* uses r3 and r5 */
- sync
- mtlr r4 /* restore link register */
-l2cache_disable_no_flush: /* provide way to disable L2 w/o flushing */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- isync
- blr
diff --git a/cpu/mpc86xx/config.mk b/cpu/mpc86xx/config.mk
deleted file mode 100644
index ca2f837..0000000
--- a/cpu/mpc86xx/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2004 Freescale Semiconductor.
-# Jeff Brown
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -ffixed-r2 -mstring
-PLATFORM_CPPFLAGS += -maltivec -mabi=altivec -msoft-float
diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c
deleted file mode 100644
index 1887575..0000000
--- a/cpu/mpc86xx/cpu.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright 2006,2009-2010 Freescale Semiconductor, Inc.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <mpc86xx.h>
-#include <asm/fsl_law.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Default board reset function
- */
-static void
-__board_reset(void)
-{
- /* Do nothing */
-}
-void board_reset(void) __attribute__((weak, alias("__board_reset")));
-
-
-int
-checkcpu(void)
-{
- sys_info_t sysinfo;
- uint pvr, svr;
- uint ver;
- uint major, minor;
- char buf1[32], buf2[32];
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- struct cpu_type *cpu;
- uint msscr0 = mfspr(MSSCR0);
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
- major = SVR_MAJ(svr);
- minor = SVR_MIN(svr);
-
- if (cpu_numcores() > 1) {
-#ifndef CONFIG_MP
- puts("Unicore software on multiprocessor system!!\n"
- "To enable mutlticore build define CONFIG_MP\n");
-#endif
- }
- puts("CPU: ");
-
- cpu = gd->cpu;
-
- puts(cpu->name);
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr);
- puts("Core: ");
-
- pvr = get_pvr();
- ver = PVR_E600_VER(pvr);
- major = PVR_E600_MAJ(pvr);
- minor = PVR_E600_MIN(pvr);
-
- printf("E600 Core %d", (msscr0 & 0x20) ? 1 : 0 );
- if (gur->pordevsr & MPC86xx_PORDEVSR_CORE1TE)
- puts("\n Core1Translation Enabled");
- debug(" (MSSCR0=%x, PORDEVSR=%x)", msscr0, gur->pordevsr);
-
- printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
-
- get_sys_info(&sysinfo);
-
- puts("Clock Configuration:\n");
- printf(" CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
- printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
- printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqSystemBus / 2),
- strmhz(buf2, sysinfo.freqSystemBus));
-
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
- } else {
- printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
- }
-
- puts("L1: D-cache 32 KB enabled\n");
- puts(" I-cache 32 KB enabled\n");
-
- puts("L2: ");
- if (get_l2cr() & 0x80000000) {
-#if defined(CONFIG_MPC8610)
- puts("256");
-#elif defined(CONFIG_MPC8641)
- puts("512");
-#endif
- puts(" KB enabled\n");
- } else {
- puts("Disabled\n");
- }
-
- return 0;
-}
-
-
-void
-do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
-
- /* Attempt board-specific reset */
- board_reset();
-
- /* Next try asserting HRESET_REQ */
- out_be32(&gur->rstcr, MPC86xx_RSTCR_HRST_REQ);
-
- while (1)
- ;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long
-get_tbclk(void)
-{
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- return (sys_info.freqSystemBus + 3L) / 4L;
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
-{
-#if defined(CONFIG_MPC8610)
- /*
- * This actually feed the hard enabled watchdog.
- */
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_wdt_t *wdt = &immap->im_wdt;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- u32 tmp = gur->pordevsr;
-
- if (tmp & 0x4000) {
- wdt->swsrr = 0x556c;
- wdt->swsrr = 0xaa39;
- }
-#endif
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Print out the state of various machine registers.
- * Currently prints out LAWs, BR0/OR0, and BATs
- */
-void mpc86xx_reginfo(void)
-{
- immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- ccsr_lbc_t *lbc = &immap->im_lbc;
-
- print_bats();
- print_laws();
-
- printf ("Local Bus Controller Registers\n"
- "\tBR0\t0x%08X\tOR0\t0x%08X \n", in_be32(&lbc->br0), in_be32(&lbc->or0));
- printf("\tBR1\t0x%08X\tOR1\t0x%08X \n", in_be32(&lbc->br1), in_be32(&lbc->or1));
- printf("\tBR2\t0x%08X\tOR2\t0x%08X \n", in_be32(&lbc->br2), in_be32(&lbc->or2));
- printf("\tBR3\t0x%08X\tOR3\t0x%08X \n", in_be32(&lbc->br3), in_be32(&lbc->or3));
- printf("\tBR4\t0x%08X\tOR4\t0x%08X \n", in_be32(&lbc->br4), in_be32(&lbc->or4));
- printf("\tBR5\t0x%08X\tOR5\t0x%08X \n", in_be32(&lbc->br5), in_be32(&lbc->or5));
- printf("\tBR6\t0x%08X\tOR6\t0x%08X \n", in_be32(&lbc->br6), in_be32(&lbc->or6));
- printf("\tBR7\t0x%08X\tOR7\t0x%08X \n", in_be32(&lbc->br7), in_be32(&lbc->or7));
-
-}
-
-/*
- * Set the DDR BATs to reflect the actual size of DDR.
- *
- * dram_size is the actual size of DDR, in bytes
- *
- * Note: we assume that CONFIG_MAX_MEM_MAPPED is 2G or smaller as we only
- * are using a single BAT to cover DDR.
- *
- * If this is not true, (e.g. CONFIG_MAX_MEM_MAPPED is 2GB but HID0_XBSEN
- * is not defined) then we might have a situation where U-Boot will attempt
- * to relocated itself outside of the region mapped by DBAT0.
- * This will cause a machine check.
- *
- * Currently we are limited to power of two sized DDR since we only use a
- * single bat. If a non-power of two size is used that is less than
- * CONFIG_MAX_MEM_MAPPED u-boot will crash.
- *
- */
-void setup_ddr_bat(phys_addr_t dram_size)
-{
- unsigned long batu, bl;
-
- bl = TO_BATU_BL(min(dram_size, CONFIG_MAX_MEM_MAPPED));
-
- if (BATU_SIZE(bl) != dram_size) {
- u64 sz = (u64)dram_size - BATU_SIZE(bl);
- print_size(sz, " left unmapped\n");
- }
-
- batu = bl | BATU_VS | BATU_VP;
- write_bat(DBAT0, batu, CONFIG_SYS_DBAT0L);
- write_bat(IBAT0, batu, CONFIG_SYS_IBAT0L);
-}
diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c
deleted file mode 100644
index b4f047d..0000000
--- a/cpu/mpc86xx/cpu_init.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * Copyright 2004,2009 Freescale Semiconductor, Inc.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * cpu_init.c - low level cpu init
- */
-
-#include <config.h>
-#include <common.h>
-#include <mpc86xx.h>
-#include <asm/mmu.h>
-#include <asm/fsl_law.h>
-#include <asm/mp.h>
-
-void setup_bats(void);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * Breathe some life into the CPU...
- *
- * Set up the memory map
- * initialize a bunch of registers
- */
-
-void cpu_init_f(void)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_lbc_t *memctl = &immap->im_lbc;
-
- /* Pointer is writable since we allocated a register for it */
- gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
-
- /* Clear initial global data */
- memset ((void *) gd, 0, sizeof (gd_t));
-
-#ifdef CONFIG_FSL_LAW
- init_laws();
-#endif
-
- setup_bats();
-
- /* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
- * addresses - these have to be modified later when FLASH size
- * has been determined
- */
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-
- /* now restrict to preliminary range */
-#if defined(CONFIG_SYS_BR0_PRELIM) && defined(CONFIG_SYS_OR0_PRELIM)
- memctl->br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->or0 = CONFIG_SYS_OR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR1_PRELIM) && defined(CONFIG_SYS_OR1_PRELIM)
- memctl->or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR2_PRELIM) && defined(CONFIG_SYS_OR2_PRELIM)
- memctl->or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR3_PRELIM) && defined(CONFIG_SYS_OR3_PRELIM)
- memctl->or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR4_PRELIM) && defined(CONFIG_SYS_OR4_PRELIM)
- memctl->or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR5_PRELIM) && defined(CONFIG_SYS_OR5_PRELIM)
- memctl->or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR6_PRELIM) && defined(CONFIG_SYS_OR6_PRELIM)
- memctl->or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_BR7_PRELIM) && defined(CONFIG_SYS_OR7_PRELIM)
- memctl->or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-#if defined(CONFIG_FSL_DMA)
- dma_init();
-#endif
-
- /* enable the timebase bit in HID0 */
- set_hid0(get_hid0() | 0x4000000);
-
- /* enable EMCP, SYNCBE | ABE bits in HID1 */
- set_hid1(get_hid1() | 0x80000C00);
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r(void)
-{
-#if defined(CONFIG_MP)
- setup_mp();
-#endif
- return 0;
-}
-
-/* Set up BAT registers */
-void setup_bats(void)
-{
-#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L)
- write_bat(DBAT0, CONFIG_SYS_DBAT0U, CONFIG_SYS_DBAT0L);
-#endif
-#if defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
- write_bat(IBAT0, CONFIG_SYS_IBAT0U, CONFIG_SYS_IBAT0L);
-#endif
- write_bat(DBAT1, CONFIG_SYS_DBAT1U, CONFIG_SYS_DBAT1L);
- write_bat(IBAT1, CONFIG_SYS_IBAT1U, CONFIG_SYS_IBAT1L);
- write_bat(DBAT2, CONFIG_SYS_DBAT2U, CONFIG_SYS_DBAT2L);
- write_bat(IBAT2, CONFIG_SYS_IBAT2U, CONFIG_SYS_IBAT2L);
- write_bat(DBAT3, CONFIG_SYS_DBAT3U, CONFIG_SYS_DBAT3L);
- write_bat(IBAT3, CONFIG_SYS_IBAT3U, CONFIG_SYS_IBAT3L);
- write_bat(DBAT4, CONFIG_SYS_DBAT4U, CONFIG_SYS_DBAT4L);
- write_bat(IBAT4, CONFIG_SYS_IBAT4U, CONFIG_SYS_IBAT4L);
- write_bat(DBAT5, CONFIG_SYS_DBAT5U, CONFIG_SYS_DBAT5L);
- write_bat(IBAT5, CONFIG_SYS_IBAT5U, CONFIG_SYS_IBAT5L);
- write_bat(DBAT6, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
- write_bat(IBAT6, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
- write_bat(DBAT7, CONFIG_SYS_DBAT7U, CONFIG_SYS_DBAT7L);
- write_bat(IBAT7, CONFIG_SYS_IBAT7U, CONFIG_SYS_IBAT7L);
-
- return;
-}
-
-#ifdef CONFIG_ADDR_MAP
-/* Initialize address mapping array */
-void init_addr_map(void)
-{
- int i;
- ppc_bat_t bat = DBAT0;
- phys_size_t size;
- unsigned long upper, lower;
-
- for (i = 0; i < CONFIG_SYS_NUM_ADDR_MAP; i++, bat++) {
- if (read_bat(bat, &upper, &lower) != -1) {
- if (!BATU_VALID(upper))
- size = 0;
- else
- size = BATU_SIZE(upper);
- addrmap_set_entry(BATU_VADDR(upper), BATL_PADDR(lower),
- size, i);
- }
-#ifdef CONFIG_HIGH_BATS
- /* High bats are not contiguous with low BAT numbers */
- if (bat == DBAT3)
- bat = DBAT4 - 1;
-#endif
- }
-}
-#endif
diff --git a/cpu/mpc86xx/ddr-8641.c b/cpu/mpc86xx/ddr-8641.c
deleted file mode 100644
index b8f2c93..0000000
--- a/cpu/mpc86xx/ddr-8641.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#if (CONFIG_CHIP_SELECTS_PER_CTRL > 4)
-#error Invalid setting for CONFIG_CHIP_SELECTS_PER_CTRL
-#endif
-
-void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num)
-{
- unsigned int i;
- volatile ccsr_ddr_t *ddr;
-
- switch (ctrl_num) {
- case 0:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
- break;
- case 1:
- ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
- break;
- default:
- printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
- return;
- }
-
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- if (i == 0) {
- out_be32(&ddr->cs0_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs0_config, regs->cs[i].config);
-
- } else if (i == 1) {
- out_be32(&ddr->cs1_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs1_config, regs->cs[i].config);
-
- } else if (i == 2) {
- out_be32(&ddr->cs2_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs2_config, regs->cs[i].config);
-
- } else if (i == 3) {
- out_be32(&ddr->cs3_bnds, regs->cs[i].bnds);
- out_be32(&ddr->cs3_config, regs->cs[i].config);
- }
- }
-
- out_be32(&ddr->timing_cfg_3, regs->timing_cfg_3);
- out_be32(&ddr->timing_cfg_0, regs->timing_cfg_0);
- out_be32(&ddr->timing_cfg_1, regs->timing_cfg_1);
- out_be32(&ddr->timing_cfg_2, regs->timing_cfg_2);
- out_be32(&ddr->sdram_cfg_2, regs->ddr_sdram_cfg_2);
- out_be32(&ddr->sdram_mode, regs->ddr_sdram_mode);
- out_be32(&ddr->sdram_mode_2, regs->ddr_sdram_mode_2);
- out_be32(&ddr->sdram_mode_cntl, regs->ddr_sdram_md_cntl);
- out_be32(&ddr->sdram_interval, regs->ddr_sdram_interval);
- out_be32(&ddr->sdram_data_init, regs->ddr_data_init);
- out_be32(&ddr->sdram_clk_cntl, regs->ddr_sdram_clk_cntl);
- out_be32(&ddr->init_addr, regs->ddr_init_addr);
- out_be32(&ddr->init_ext_addr, regs->ddr_init_ext_addr);
-
- debug("before go\n");
-
- /*
- * 200 painful micro-seconds must elapse between
- * the DDR clock setup and the DDR config enable.
- */
- udelay(200);
- asm volatile("sync;isync");
-
- out_be32(&ddr->sdram_cfg, regs->ddr_sdram_cfg);
-
- /*
- * Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done
- */
- while (in_be32(&ddr->sdram_cfg_2) & 0x10) {
- udelay(10000); /* throttle polling rate */
- }
-}
diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c
deleted file mode 100644
index 51f3f4c..0000000
--- a/cpu/mpc86xx/fdt.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-#include <asm/mp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void ft_fixup_num_cores(void *blob);
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
-#ifdef CONFIG_MP
- int off;
- u32 bootpg = determine_mp_bootpg();
-#endif
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
-#if defined(CONFIG_MPC8641)
- do_fixup_by_compat_u32(blob, "fsl,mpc8641-localbus",
- "bus-frequency", gd->lbc_clk, 1);
-#endif
- do_fixup_by_compat_u32(blob, "fsl,elbc",
- "bus-frequency", gd->lbc_clk, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
-#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) \
- || defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3)
- fdt_fixup_ethernet(blob);
-#endif
-
-#ifdef CONFIG_SYS_NS16550
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", CONFIG_SYS_NS16550_CLK, 1);
-#endif
-
-#ifdef CONFIG_MP
- /* Reserve the boot page so OSes dont use it */
- off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
- if (off < 0)
- printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
-#endif
- ft_fixup_num_cores(blob);
-}
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
deleted file mode 100644
index c78fc72..0000000
--- a/cpu/mpc86xx/interrupts.c
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 Motorola Inc. (MPC85xx port)
- * Xianghua Xiao (X.Xiao@motorola.com)
- *
- * (C) Copyright 2004, 2007 Freescale Semiconductor. (MPC86xx Port)
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc86xx.h>
-#include <command.h>
-#include <asm/processor.h>
-
-int interrupt_init_cpu(unsigned long *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
- volatile ccsr_pic_t *pic = &immr->im_pic;
-
- pic->gcr = MPC86xx_PICGCR_RST;
- while (pic->gcr & MPC86xx_PICGCR_RST)
- ;
- pic->gcr = MPC86xx_PICGCR_MODE;
-
- *decrementer_count = get_tbclk() / CONFIG_SYS_HZ;
- debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
- (get_tbclk() / 1000000),
- *decrementer_count);
-
-#ifdef CONFIG_INTERRUPTS
-
- pic->iivpr1 = 0x810001; /* 50220 enable mcm interrupts */
- debug("iivpr1@%x = %x\n", &pic->iivpr1, pic->iivpr1);
-
- pic->iivpr2 = 0x810002; /* 50240 enable ddr interrupts */
- debug("iivpr2@%x = %x\n", &pic->iivpr2, pic->iivpr2);
-
- pic->iivpr3 = 0x810003; /* 50260 enable lbc interrupts */
- debug("iivpr3@%x = %x\n", &pic->iivpr3, pic->iivpr3);
-
-#if defined(CONFIG_PCI1) || defined(CONFIG_PCIE1)
- pic->iivpr8 = 0x810008; /* enable pcie1 interrupts */
- debug("iivpr8@%x = %x\n", &pic->iivpr8, pic->iivpr8);
-#endif
-#if defined(CONFIG_PCI2) || defined(CONFIG_PCIE2)
- pic->iivpr9 = 0x810009; /* enable pcie2 interrupts */
- debug("iivpr9@%x = %x\n", &pic->iivpr9, pic->iivpr9);
-#endif
-
- pic->ctpr = 0; /* 40080 clear current task priority register */
-#endif
-
- return 0;
-}
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
-}
-
-/*
- * Install and free a interrupt handler. Not implemented yet.
- */
-void irq_install_handler(int vec, interrupt_handler_t *handler, void *arg)
-{
-}
-
-void irq_free_handler(int vec)
-{
-}
-
-/*
- * irqinfo - print information about PCI devices,not implemented.
- */
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- return 0;
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- puts("external_interrupt (oops!)\n");
-}
diff --git a/cpu/mpc86xx/mp.c b/cpu/mpc86xx/mp.c
deleted file mode 100644
index b4a0faa..0000000
--- a/cpu/mpc86xx/mp.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <ioports.h>
-#include <lmb.h>
-#include <asm/io.h>
-#include <asm/mp.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int cpu_reset(int nr)
-{
- /* dummy function so common/cmd_mp.c will build
- * should be implemented in the future, when cpu_release()
- * is supported. Be aware there may be a similiar bug
- * as exists on MPC85xx w/its PIC having a timing window
- * associated to resetting the core */
- return 1;
-}
-
-int cpu_status(int nr)
-{
- /* dummy function so common/cmd_mp.c will build */
- return 0;
-}
-
-int cpu_disable(int nr)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
-
- switch (nr) {
- case 0:
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU0);
- break;
- case 1:
- setbits_be32(&gur->devdisr, MPC86xx_DEVDISR_CPU1);
- break;
- default:
- printf("Invalid cpu number for disable %d\n", nr);
- return 1;
- }
-
- return 0;
-}
-
-int cpu_release(int nr, int argc, char *argv[])
-{
- /* dummy function so common/cmd_mp.c will build
- * should be implemented in the future */
- return 1;
-}
-
-u32 determine_mp_bootpg(void)
-{
- /* if we have 4G or more of memory, put the boot page at 4Gb-1M */
- if ((u64)gd->ram_size > 0xfffff000)
- return (0xfff00000);
-
- return (gd->ram_size - (1024 * 1024));
-}
-
-void cpu_mp_lmb_reserve(struct lmb *lmb)
-{
- u32 bootpg = determine_mp_bootpg();
-
- /* tell u-boot we stole a page */
- lmb_reserve(lmb, bootpg, 4096);
-}
-
-/*
- * Copy the code for other cpus to execute into an
- * aligned location accessible via BPTR
- */
-void setup_mp(void)
-{
- extern ulong __secondary_start_page;
- ulong fixup = (ulong)&__secondary_start_page;
- u32 bootpg = determine_mp_bootpg();
- u32 bootpg_va;
-
- if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
- /* We're not covered by the DDR mapping, set up BAT */
- write_bat(DBAT7, CONFIG_SYS_SCRATCH_VA | BATU_BL_128K |
- BATU_VS | BATU_VP,
- bootpg | BATL_PP_RW | BATL_MEMCOHERENCE);
- bootpg_va = CONFIG_SYS_SCRATCH_VA;
- } else {
- bootpg_va = bootpg;
- }
-
- memcpy((void *)bootpg_va, (void *)fixup, 4096);
- flush_cache(bootpg_va, 4096);
-
- /* remove the temporary BAT mapping */
- if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE)
- write_bat(DBAT7, 0, 0);
-
- /* If the physical location of bootpg is not at fff00000, set BPTR */
- if (bootpg != 0xfff00000)
- out_be32((uint *)(CONFIG_SYS_CCSRBAR + 0x20), 0x80000000 |
- (bootpg >> 12));
-}
diff --git a/cpu/mpc86xx/release.S b/cpu/mpc86xx/release.S
deleted file mode 100644
index 67a6f2b..0000000
--- a/cpu/mpc86xx/release.S
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * Copyright 2004, 2007, 2008 Freescale Semiconductor.
- * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-#include <mpc86xx.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/* If this is a multi-cpu system then we need to handle the
- * 2nd cpu. The assumption is that the 2nd cpu is being
- * held in boot holdoff mode until the 1st cpu unlocks it
- * from Linux. We'll do some basic cpu init and then pass
- * it to the Linux Reset Vector.
- * Sri: Much of this initialization is not required. Linux
- * rewrites the bats, and the sprs and also enables the L1 cache.
- *
- * Core 0 must copy this to a 1M aligned region and set BPTR
- * to point to it.
- */
- .align 12
-.globl __secondary_start_page
-__secondary_start_page:
- .space 0x100 /* space over to reset vector loc */
- mfspr r0, MSSCR0
- andi. r0, r0, 0x0020
- rlwinm r0,r0,27,31,31
- mtspr PIR, r0
-
- /* Invalidate BATs */
- li r0, 0
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
- isync
- sync
-
- /* enable extended addressing */
- mfspr r0, HID0
- lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
- ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
- mtspr HID0, r0
- sync
- isync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- addis r3, r0, L2_INIT@h
- ori r3, r3, L2_INIT@l
- sync
- mtspr l2cr, r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- /* invalidate the L2 cache */
- mfspr r3, l2cr
- rlwinm. r3, r3, 0, 0, 0
- beq 1f
-
- mfspr r3, l2cr
- rlwinm r3, r3, 0, 1, 31
-
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr l2cr, r3
- sync
-1: mfspr r3, l2cr
- oris r3, r3, L2CR_L2I@h
- mtspr l2cr, r3
-
-invl2:
- mfspr r3, l2cr
- andis. r3, r3, L2CR_L2I@h
- bne invl2
- sync
-#endif
-
- /* enable and invalidate the data cache */
- mfspr r3, HID0
- li r5, HID0_DCFI|HID0_DLOCK
- andc r3, r3, r5
- mtspr HID0, r3 /* no invalidate, unlock */
- ori r3, r3, HID0_DCE
- ori r5, r3, HID0_DCFI
- mtspr HID0, r5 /* enable + invalidate */
- mtspr HID0, r3 /* enable */
- sync
-#ifdef CONFIG_SYS_L2
- sync
- lis r3, L2_ENABLE@h
- ori r3, r3, L2_ENABLE@l
- mtspr l2cr, r3
- isync
- sync
-#endif
-
- /* enable and invalidate the instruction cache*/
- mfspr r3, HID0
- li r5, HID0_ICFI|HID0_ILOCK
- andc r3, r3, r5
- ori r3, r3, HID0_ICE
- ori r5, r3, HID0_ICFI
- mtspr HID0, r5
- mtspr HID0, r3
- isync
- sync
-
- /* TBEN in HID0 */
- mfspr r4, HID0
- oris r4, r4, 0x0400
- mtspr HID0, r4
- sync
- isync
-
- /* MCP|SYNCBE|ABE in HID1 */
- mfspr r4, HID1
- oris r4, r4, 0x8000
- ori r4, r4, 0x0C00
- mtspr HID1, r4
- sync
- isync
-
- lis r3, CONFIG_LINUX_RESET_VEC@h
- ori r3, r3, CONFIG_LINUX_RESET_VEC@l
- mtlr r3
- blr
-
- /* Never Returns, Running in Linux Now */
diff --git a/cpu/mpc86xx/speed.c b/cpu/mpc86xx/speed.c
deleted file mode 100644
index 64a3479..0000000
--- a/cpu/mpc86xx/speed.c
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * Copyright 2004 Freescale Semiconductor.
- * Jeff Brown
- * Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc86xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* used in some defintiions of CONFIG_SYS_CLK_FREQ */
-extern unsigned long get_board_sys_clk(unsigned long dummy);
-
-void get_sys_info(sys_info_t *sysInfo)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint plat_ratio, e600_ratio;
- uint lcrr_div;
-
- plat_ratio = (gur->porpllsr) & 0x0000003e;
- plat_ratio >>= 1;
-
- switch (plat_ratio) {
- case 0x0:
- sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
- break;
- case 0x02:
- case 0x03:
- case 0x04:
- case 0x05:
- case 0x06:
- case 0x08:
- case 0x09:
- case 0x0a:
- case 0x0c:
- case 0x10:
- sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
- break;
- default:
- sysInfo->freqSystemBus = 0;
- break;
- }
-
- e600_ratio = (gur->porpllsr) & 0x003f0000;
- e600_ratio >>= 16;
-
- switch (e600_ratio) {
- case 0x10:
- sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
- break;
- case 0x19:
- sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
- break;
- case 0x20:
- sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
- break;
- case 0x39:
- sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
- break;
- case 0x28:
- sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
- break;
- case 0x1d:
- sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
- break;
- default:
- sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
- break;
- }
-
-#if defined(CONFIG_SYS_LBC_LCRR)
- /* We will program LCRR to this value later */
- lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
-#else
- {
- volatile ccsr_lbc_t *lbc = &immap->im_lbc;
- lcrr_div = in_be32(&lbc->lcrr) & LCRR_CLKDIV;
- }
-#endif
- if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
- sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
- } else {
- /* In case anyone cares what the unknown value is */
- sysInfo->freqLocalBus = lcrr_div;
- }
-}
-
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2)
- * (Approx. GCLK frequency in Hz)
- */
-
-int get_clocks(void)
-{
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqSystemBus;
- gd->lbc_clk = sys_info.freqLocalBus;
-
- /*
- * The base clock for I2C depends on the actual SOC. Unfortunately,
- * there is no pattern that can be used to determine the frequency, so
- * the only choice is to look up the actual SOC number and use the value
- * for that SOC. This information is taken from application note
- * AN2919.
- */
-#ifdef CONFIG_MPC8610
- gd->i2c1_clk = sys_info.freqSystemBus;
-#else
- gd->i2c1_clk = sys_info.freqSystemBus / 2;
-#endif
- gd->i2c2_clk = gd->i2c1_clk;
-
- if (gd->cpu_clk != 0)
- return 0;
- else
- return 1;
-}
-
-
-/*
- * get_bus_freq
- * Return system bus freq in Hz
- */
-
-ulong get_bus_freq(ulong dummy)
-{
- ulong val;
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- val = sys_info.freqSystemBus;
-
- return val;
-}
diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S
deleted file mode 100644
index ed1e4ca..0000000
--- a/cpu/mpc86xx/start.S
+++ /dev/null
@@ -1,957 +0,0 @@
-/*
- * Copyright 2004, 2007 Freescale Semiconductor.
- * Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfff00100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- */
-#include <config.h>
-#include <mpc86xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/*
- * Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions
- */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
- sync
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
- sync
-
- /* the boot code is located below the exception table */
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
- .globl _end_of_vectors
-_end_of_vectors:
-
- . = 0x2000
-
-boot_cold:
-boot_warm:
- /*
- * NOTE: Only Cpu 0 will ever come here. Other cores go to an
- * address specified by the BPTR
- */
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- /* disable everything */
- li r0, 0
- mtspr HID0, r0
- sync
- mtmsr 0
-#endif
-
- /* Invalidate BATs */
- bl invalidate_bats
- sync
- /* Invalidate all of TLB before MMU turn on */
- bl clear_tlbs
- sync
-
-#ifdef CONFIG_SYS_L2
- /* init the L2 cache */
- lis r3, L2_INIT@h
- ori r3, r3, L2_INIT@l
- mtspr l2cr, r3
- /* invalidate the L2 cache */
- bl l2cache_invalidate
- sync
-#endif
-
- /*
- * Calculate absolute address in FLASH and jump there
- *------------------------------------------------------*/
- lis r3, CONFIG_SYS_MONITOR_BASE_EARLY@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE_EARLY@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*------------------------------------------------------*/
- /* perform low-level init */
-
- /* enable extended addressing */
- bl enable_ext_addr
-
- /* setup the bats */
- bl early_bats
-
- /*
- * Cache must be enabled here for stack-in-cache trick.
- * This means we need to enable the BATS.
- * Cache should be turned on after BATs, since by default
- * everything is write-through.
- */
-
- /* enable address translation */
- mfmsr r5
- ori r5, r5, (MSR_IR | MSR_DR)
- lis r3,addr_trans_enabled@h
- ori r3, r3, addr_trans_enabled@l
- mtspr SPRN_SRR0,r3
- mtspr SPRN_SRR1,r5
- rfi
-
-addr_trans_enabled:
- /* enable and invalidate the data cache */
-/* bl l1dcache_enable */
- bl dcache_enable
- sync
-
-#if 1
- bl icache_enable
-#endif
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
- bl lock_ram_in_cache
- sync
-#endif
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
- bl setup_ccsrbar
-#endif
-
- /* set up the stack pointer in our newly created
- * cache-ram (r1) */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- /* run low-level CPU init code (from Flash) */
- bl cpu_init_f
- sync
-
-#ifdef RUN_DIAG
-
- /* Load PX_AUX register address in r4 */
- lis r4, PIXIS_BASE@h
- ori r4, r4, 0x6
- /* Load contents of PX_AUX in r3 bits 24 to 31*/
- lbz r3, 0(r4)
-
- /* Mask and obtain the bit in r3 */
- rlwinm. r3, r3, 0, 24, 24
- /* If not zero, jump and continue with u-boot */
- bne diag_done
-
- /* Load back contents of PX_AUX in r3 bits 24 to 31 */
- lbz r3, 0(r4)
- /* Set the MSB of the register value */
- ori r3, r3, 0x80
- /* Write value in r3 back to PX_AUX */
- stb r3, 0(r4)
-
- /* Get the address to jump to in r3*/
- lis r3, CONFIG_SYS_DIAG_ADDR@h
- ori r3, r3, CONFIG_SYS_DIAG_ADDR@l
-
- /* Load the LR with the branch address */
- mtlr r3
-
- /* Branch to diagnostic */
- blr
-
-diag_done:
-#endif
-
-/* bl l2cache_enable */
- mr r3, r21
-
- /* r3: BOOTFLAG */
- /* run 1st part of board init code (from Flash) */
- bl board_init_f
- sync
-
- /* NOTREACHED */
-
- .globl invalidate_bats
-invalidate_bats:
-
- li r0, 0
- /* invalidate BATs */
- mtspr IBAT0U, r0
- mtspr IBAT1U, r0
- mtspr IBAT2U, r0
- mtspr IBAT3U, r0
- mtspr IBAT4U, r0
- mtspr IBAT5U, r0
- mtspr IBAT6U, r0
- mtspr IBAT7U, r0
-
- isync
- mtspr DBAT0U, r0
- mtspr DBAT1U, r0
- mtspr DBAT2U, r0
- mtspr DBAT3U, r0
- mtspr DBAT4U, r0
- mtspr DBAT5U, r0
- mtspr DBAT6U, r0
- mtspr DBAT7U, r0
-
- isync
- sync
- blr
-
-/*
- * early_bats:
- *
- * Set up bats needed early on - this is usually the BAT for the
- * stack-in-cache, the Flash, and CCSR space
- */
- .globl early_bats
-early_bats:
- /* IBAT 3 */
- lis r4, CONFIG_SYS_IBAT3L@h
- ori r4, r4, CONFIG_SYS_IBAT3L@l
- lis r3, CONFIG_SYS_IBAT3U@h
- ori r3, r3, CONFIG_SYS_IBAT3U@l
- mtspr IBAT3L, r4
- mtspr IBAT3U, r3
- isync
-
- /* DBAT 3 */
- lis r4, CONFIG_SYS_DBAT3L@h
- ori r4, r4, CONFIG_SYS_DBAT3L@l
- lis r3, CONFIG_SYS_DBAT3U@h
- ori r3, r3, CONFIG_SYS_DBAT3U@l
- mtspr DBAT3L, r4
- mtspr DBAT3U, r3
- isync
-
- /* IBAT 5 */
- lis r4, CONFIG_SYS_IBAT5L@h
- ori r4, r4, CONFIG_SYS_IBAT5L@l
- lis r3, CONFIG_SYS_IBAT5U@h
- ori r3, r3, CONFIG_SYS_IBAT5U@l
- mtspr IBAT5L, r4
- mtspr IBAT5U, r3
- isync
-
- /* DBAT 5 */
- lis r4, CONFIG_SYS_DBAT5L@h
- ori r4, r4, CONFIG_SYS_DBAT5L@l
- lis r3, CONFIG_SYS_DBAT5U@h
- ori r3, r3, CONFIG_SYS_DBAT5U@l
- mtspr DBAT5L, r4
- mtspr DBAT5U, r3
- isync
-
- /* IBAT 6 */
- lis r4, CONFIG_SYS_IBAT6L_EARLY@h
- ori r4, r4, CONFIG_SYS_IBAT6L_EARLY@l
- lis r3, CONFIG_SYS_IBAT6U_EARLY@h
- ori r3, r3, CONFIG_SYS_IBAT6U_EARLY@l
- mtspr IBAT6L, r4
- mtspr IBAT6U, r3
- isync
-
- /* DBAT 6 */
- lis r4, CONFIG_SYS_DBAT6L_EARLY@h
- ori r4, r4, CONFIG_SYS_DBAT6L_EARLY@l
- lis r3, CONFIG_SYS_DBAT6U_EARLY@h
- ori r3, r3, CONFIG_SYS_DBAT6U_EARLY@l
- mtspr DBAT6L, r4
- mtspr DBAT6U, r3
- isync
-
-#if(CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
- /* IBAT 7 */
- lis r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@h
- ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_IBATL@l
- lis r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@h
- ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_IBATU@l
- mtspr IBAT7L, r4
- mtspr IBAT7U, r3
- isync
-
- /* DBAT 7 */
- lis r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@h
- ori r4, r4, CONFIG_SYS_CCSR_DEFAULT_DBATL@l
- lis r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@h
- ori r3, r3, CONFIG_SYS_CCSR_DEFAULT_DBATU@l
- mtspr DBAT7L, r4
- mtspr DBAT7U, r3
- isync
-#endif
- blr
-
- .globl clear_tlbs
-clear_tlbs:
- addis r3, 0, 0x0000
- addis r5, 0, 0x4
- isync
-tlblp:
- tlbie r3
- sync
- addi r3, r3, 0x1000
- cmp 0, 0, r3, r5
- blt tlblp
- blr
-
- .globl disable_addr_trans
-disable_addr_trans:
- /* disable address translation */
- mflr r4
- mfmsr r3
- andi. r0, r3, (MSR_IR | MSR_DR)
- beqlr
- andc r3, r3, r0
- mtspr SRR0, r4
- mtspr SRR1, r3
- rfi
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
- .globl dc_read
-dc_read:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
- .globl get_svr
-get_svr:
- mfspr r3, SVR
- blr
-
-
-/*
- * Function: in8
- * Description: Input 8 bits
- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*
- * Function: out8
- * Description: Output 8 bits
- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*
- * Function: out16
- * Description: Output 16 bits
- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*
- * Function: out16r
- * Description: Byte reverse and output 16 bits
- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*
- * Function: out32
- * Description: Output 32 bits
- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*
- * Function: out32r
- * Description: Byte reverse and output 32 bits
- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*
- * Function: in16
- * Description: Input 16 bits
- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*
- * Function: in16r
- * Description: Input 16 bits and byte reverse
- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*
- * Function: in32
- * Description: Input 32 bits
- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/*
- * Function: in32r
- * Description: Input 32 bits and byte reverse
- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
-
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-/* clear_bss: */
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
- mr r3, r9 /* Init Date pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /* not reached - end relocate_code */
-/*-----------------------------------------------------------------------*/
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- /* enable execptions from RAM vectors */
- mfmsr r7
- li r8,MSR_IP
- andc r7,r7,r8
- ori r7,r7,MSR_ME /* Enable Machine Check */
- mtmsr r7
-
- mtlr r4 /* restore link register */
- blr
-
-.globl enable_ext_addr
-enable_ext_addr:
- mfspr r0, HID0
- lis r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@h
- ori r0, r0, (HID0_HIGH_BAT_EN | HID0_XBSEN | HID0_XAEN)@l
- mtspr HID0, r0
- sync
- isync
- blr
-
-#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
-.globl setup_ccsrbar
-setup_ccsrbar:
- /* Special sequence needed to update CCSRBAR itself */
- lis r4, CONFIG_SYS_CCSRBAR_DEFAULT@h
- ori r4, r4, CONFIG_SYS_CCSRBAR_DEFAULT@l
-
- lis r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@h
- ori r5, r5, CONFIG_SYS_CCSRBAR_PHYS_LOW@l
- srwi r5,r5,12
- li r6, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
- rlwimi r5,r6,20,8,11
- stw r5, 0(r4) /* Store physical value of CCSR */
- isync
-
- lis r5, TEXT_BASE@h
- ori r5,r5,TEXT_BASE@l
- lwz r5, 0(r5)
- isync
-
- /* Use VA of CCSR to do read */
- lis r3, CONFIG_SYS_CCSRBAR@h
- lwz r5, CONFIG_SYS_CCSRBAR@l(r3)
- isync
-
- blr
-#endif
-
-#ifdef CONFIG_SYS_INIT_RAM_LOCK
-lock_ram_in_cache:
- /* Allocate Initial RAM in data cache.
- */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1:
- dcbz r0, r3
- addi r3, r3, 32
- bdnz 1b
-#if 1
-/* Lock the data cache */
- mfspr r0, HID0
- ori r0, r0, 0x1000
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#if 0
- /* Lock the first way of the data cache */
- mfspr r0, LDSTCR
- ori r0, r0, 0x0080
-#if defined(CONFIG_ALTIVEC)
- dssall
-#endif
- sync
- mtspr LDSTCR, r0
- sync
- isync
- blr
-#endif
-
-.globl unlock_ram_in_cache
-unlock_ram_in_cache:
- /* invalidate the INIT_RAM section */
- lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
- ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
- (CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
- mtctr r4
-1: icbi r0, r3
- addi r3, r3, 32
- bdnz 1b
- sync /* Wait for all icbi to complete on bus */
- isync
-#if 1
-/* Unlock the data cache and invalidate it */
- mfspr r0, HID0
- li r3,0x1000
- andc r0,r0,r3
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#if 0
- /* Unlock the first way of the data cache */
- mfspr r0, LDSTCR
- li r3,0x0080
- andc r0,r0,r3
-#ifdef CONFIG_ALTIVEC
- dssall
-#endif
- sync
- mtspr LDSTCR, r0
- sync
- isync
- li r3,0x0400
- or r0,r0,r3
- sync
- mtspr HID0, r0
- sync
- blr
-#endif
-#endif
diff --git a/cpu/mpc86xx/traps.c b/cpu/mpc86xx/traps.c
deleted file mode 100644
index 406403e..0000000
--- a/cpu/mpc86xx/traps.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/*
- * End of addressable memory. This may be less than the actual
- * amount of memory on the system if we're unable to keep all
- * the memory mapped in.
- */
-extern ulong get_effective_memsize(void);
-#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize())
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint) sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32)
- break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void
-show_regs(struct pt_regs *regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS:"
- " %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP:"
- " %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr & MSR_EE ? 1 : 0,
- regs->msr & MSR_PR ? 1 : 0, regs->msr & MSR_FP ? 1 : 0,
- regs->msr & MSR_ME ? 1 : 0, regs->msr & MSR_IR ? 1 : 0,
- regs->msr & MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
- switch ( regs->msr & 0x001F0000) {
- case (0x80000000>>11):
- printf("MSS error. MSSSR0: %08x\n", mfspr(SPRN_MSSSR0));
- break;
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000 >> 13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000 >> 14):
- printf("Data parity signal\n");
- break;
- case (0x80000000 >> 15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
- int i, j;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
-
- p = (unsigned char *)((unsigned long)p & 0xFFFFFFE0);
- p -= 32;
- for (i = 0; i < 256; i += 16) {
- printf("%08x: ", (unsigned int)p + i);
- for (j = 0; j < 16; j++) {
- printf("%02x ", p[i + j]);
- }
- printf("\n");
- }
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler) (regs))
- return;
-#endif
- printf("UnknownException regs@%lx\n", (ulong)regs);
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-/*
- * Probe an address by reading.
- * If not present, return -1,
- * otherwise return 0.
- */
-int
-addr_probe(uint *addr)
-{
- return 0;
-}
diff --git a/cpu/mpc8xx/Makefile b/cpu/mpc8xx/Makefile
deleted file mode 100644
index 5f70459..0000000
--- a/cpu/mpc8xx/Makefile
+++ /dev/null
@@ -1,66 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG
-
-LIB = $(obj)lib$(CPU).a
-
-START-y += start.o
-START-y += kgdb.o
-COBJS-y += bedbug_860.o
-COBJS-y += commproc.o
-COBJS-y += cpu.o
-COBJS-y += cpu_init.o
-COBJS-y += fec.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-y += i2c.o
-COBJS-y += interrupts.o
-COBJS-y += lcd.o
-COBJS-y += scc.o
-COBJS-y += serial.o
-COBJS-y += speed.o
-COBJS-y += spi.o
-COBJS-y += traps.o
-COBJS-y += upatch.o
-COBJS-y += video.o
-SOBJS-y += plprcr_write.o
-
-SRCS := $(START-y:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-START := $(addprefix $(obj),$(START-y))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(obj)kgdb.o
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/mpc8xx/bedbug_860.c b/cpu/mpc8xx/bedbug_860.c
deleted file mode 100644
index 0308bbb..0000000
--- a/cpu/mpc8xx/bedbug_860.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * Bedbug Functions specific to the MPC860 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-#include <bedbug/type.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_8xx)
-
-#define MAX_BREAK_POINTS 2
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug860_init __P((void));
-void bedbug860_do_break __P((cmd_tbl_t*,int,int,char*[]));
-void bedbug860_break_isr __P((struct pt_regs*));
-int bedbug860_find_empty __P((void));
-int bedbug860_set __P((int,unsigned long));
-int bedbug860_clear __P((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the MPC860. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug860_init( void )
-{
- int i;
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug860_do_break;
- bug_ctx.break_isr = bedbug860_break_isr;
- bug_ctx.find_empty = bedbug860_find_empty;
- bug_ctx.set = bedbug860_set;
- bug_ctx.clear = bedbug860_clear;
-
- for( i = 1; i <= MAX_BREAK_POINTS; ++i )
- (*bug_ctx.clear)( i );
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 860. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug860_do_break (cmd_tbl_t *cmdtp, int flag, int argc,
- char *argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
- /* -------------------------------------------------- */
-
- if (argc < 2)
- {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if( strcmp( argv[ 1 ], "off" ) == 0 )
- {
- if( bug_ctx.hw_debug_enabled == 0 )
- {
- printf( "No breakpoints enabled\n" );
- return;
- }
-
- which_bp = simple_strtoul( argv[ 2 ], NULL, 10 );
-
- if( bug_ctx.clear )
- (*bug_ctx.clear)( which_bp );
-
- printf( "Breakpoint %d removed\n", which_bp );
- return;
- }
-
- /* Show a list of breakpoints */
-
- if( strcmp( argv[ 1 ], "show" ) == 0 )
- {
- for( which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp )
- {
-
- switch( which_bp )
- {
- case 1: addr = GET_CMPA(); break;
- case 2: addr = GET_CMPB(); break;
- case 3: addr = GET_CMPC(); break;
- case 4: addr = GET_CMPD(); break;
- }
-
- printf( "Breakpoint [%d]: ", which_bp );
- if( addr == 0 )
- printf( "NOT SET\n" );
- else
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if( !isdigit( argv[ 1 ][ 0 ]))
- {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul( argv[ 1 ], NULL, 16 ) & 0xfffffffc;
-
- if(( bug_ctx.set ) && ( which_bp = (*bug_ctx.set)( 0, addr )) > 0 )
- {
- printf( "Breakpoint [%d]: ", which_bp );
- disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX );
- }
-
- return;
-} /* bedbug860_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug860_break_isr( struct pt_regs *regs )
-{
- unsigned long addr; /* Address stopped at */
- unsigned long cause; /* Address stopped at */
- /* -------------------------------------------------- */
-
- cause = GET_ICR();
-
- if( !(cause & 0x00000004)) {
- printf( "Not an instruction breakpoint (ICR 0x%08lx)\n", cause );
- return;
- }
-
- addr = regs->nip;
-
- if( addr == GET_CMPA() )
- {
- bug_ctx.current_bp = 1;
- }
- else if( addr == GET_CMPB() )
- {
- bug_ctx.current_bp = 2;
- }
- else if( addr == GET_CMPC() )
- {
- bug_ctx.current_bp = 3;
- }
- else if( addr == GET_CMPD() )
- {
- bug_ctx.current_bp = 4;
- }
-
- bedbug_main_loop( addr, regs );
- return;
-} /* bedbug860_break_isr */
-
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug860_find_empty( void )
-{
- /* -------------------------------------------------- */
-
- if( GET_CMPA() == 0 )
- return 1;
-
- if( GET_CMPB() == 0 )
- return 2;
-
- if( GET_CMPC() == 0 )
- return 3;
-
- if( GET_CMPD() == 0 )
- return 4;
-
- return 0;
-} /* bedbug860_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_set( int which_bp, unsigned long addr )
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if(( bug_ctx.find_empty ) && ( !which_bp ) &&
- ( which_bp = (*bug_ctx.find_empty)()) == 0 )
- {
- printf( "All breakpoints in use\n" );
- return 0;
- }
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # %d\n", which_bp );
- return 0;
- }
-
- if( ! bug_ctx.hw_debug_enabled )
- {
- bug_ctx.hw_debug_enabled = 1;
- SET_DER( GET_DER() | 0x00000004 );
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( addr );
- SET_ICTRL( GET_ICTRL() | 0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( addr );
- SET_ICTRL( GET_ICTRL() | 0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( addr );
- SET_ICTRL( GET_ICTRL() | 0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( addr );
- SET_ICTRL( GET_ICTRL() | 0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return which_bp;
-} /* bedbug860_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug860_clear( int which_bp )
-{
- /* -------------------------------------------------- */
-
- if( which_bp < 1 || which_bp > MAX_BREAK_POINTS )
- {
- printf( "Invalid break point # (%d)\n", which_bp );
- return -1;
- }
-
- switch( which_bp )
- {
- case 1:
- SET_CMPA( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x80080800 ); /* CTA=Equal,IW0=Match A,SIW0EN */
- break;
-
- case 2:
- SET_CMPB( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x10020400 ); /* CTB=Equal,IW1=Match B,SIW1EN */
- break;
-
- case 3:
- SET_CMPC( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x02008200 ); /* CTC=Equal,IW2=Match C,SIW2EN */
- break;
-
- case 4:
- SET_CMPD( 0 );
- SET_ICTRL( GET_ICTRL() & ~0x00404100 ); /* CTD=Equal,IW3=Match D,SIW3EN */
- break;
- }
-
- return 0;
-} /* bedbug860_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c
deleted file mode 100644
index a87a0dc..0000000
--- a/cpu/mpc8xx/commproc.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
-
-int dpram_init (void)
-{
- /* Reclaim the DP memory for our use. */
- gd->dp_alloc_base = CPM_DATAONLY_BASE;
- gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE;
-
- return (0);
-}
-
-/* Allocate some memory from the dual ported ram. We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc (uint size)
-{
- uint addr = gd->dp_alloc_base;
-
- if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top)
- return (CPM_DP_NOSPACE);
-
- gd->dp_alloc_base += size;
-
- return addr;
-}
-
-uint dpram_base (void)
-{
- return gd->dp_alloc_base;
-}
-
-/* Allocate some memory from the dual ported ram. We may want to
- * enforce alignment restrictions, but right now everyone is a good
- * citizen.
- */
-uint dpram_alloc_align (uint size, uint align)
-{
- uint addr, mask = align - 1;
-
- addr = (gd->dp_alloc_base + mask) & ~mask;
-
- if ((addr + size) >= gd->dp_alloc_top)
- return (CPM_DP_NOSPACE);
-
- gd->dp_alloc_base = addr + size;
-
- return addr;
-}
-
-uint dpram_base_align (uint align)
-{
- uint mask = align - 1;
-
- return (gd->dp_alloc_base + mask) & ~mask;
-}
-#endif /* CONFIG_SYS_ALLOC_DPRAM */
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- *(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr =
- ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR;
-
- return *(volatile ulong *) save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
- CPM_BOOTCOUNT_ADDR );
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)( ((immap_t *) CONFIG_SYS_IMMR)->im_cpm.cp_dpmem +
- CPM_BOOTCOUNT_ADDR );
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/mpc8xx/config.mk b/cpu/mpc8xx/config.mk
deleted file mode 100644
index 5540d65..0000000
--- a/cpu/mpc8xx/config.mk
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-
-PLATFORM_CPPFLAGS += -DCONFIG_8xx -ffixed-r2 -mstring -mcpu=860 -msoft-float
diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c
deleted file mode 100644
index 2eb848b..0000000
--- a/cpu/mpc8xx/cpu.c
+++ /dev/null
@@ -1,654 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * m8xx.c
- *
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <netdev.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_OF_LIBFDT)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static char *cpu_warning = "\n " \
- "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***";
-
-#if ((defined(CONFIG_MPC86x) || defined(CONFIG_MPC855)) && \
- !defined(CONFIG_MPC862))
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- char *id_str =
-# if defined(CONFIG_MPC855)
- "PC855";
-# elif defined(CONFIG_MPC860P)
- "PC860P";
-# else
- NULL;
-# endif
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 860 */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
- suf = "";
-
- /*
- * Some boards use sockets so different CPUs can be used.
- * We have to check chip version in run time.
- */
- switch (k) {
- case 0x00020001: pre = 'P'; break;
- case 0x00030001: break;
- case 0x00120003: suf = "A"; break;
- case 0x00130003: suf = "A3"; break;
-
- case 0x00200004: suf = "B"; break;
-
- case 0x00300004: suf = "C"; break;
- case 0x00310004: suf = "C1"; m = 1; break;
-
- case 0x00200064: mid = "SR"; suf = "B"; break;
- case 0x00300065: mid = "SR"; suf = "C"; break;
- case 0x00310065: mid = "SR"; suf = "C1"; m = 1; break;
- case 0x05010000: suf = "D3"; m = 1; break;
- case 0x05020000: suf = "D4"; m = 1; break;
- /* this value is not documented anywhere */
- case 0x40000000: pre = 'P'; suf = "D"; m = 1; break;
- /* MPC866P/MPC866T/MPC859T/MPC859DSL/MPC852T */
- case 0x08010004: /* Rev. A.0 */
- suf = "A";
- /* fall through */
- case 0x08000003: /* Rev. 0.3 */
- pre = 'M'; m = 1;
- if (id_str == NULL)
- id_str =
-# if defined(CONFIG_MPC852T)
- "PC852T";
-# elif defined(CONFIG_MPC859T)
- "PC859T";
-# elif defined(CONFIG_MPC859DSL)
- "PC859DSL";
-# elif defined(CONFIG_MPC866T)
- "PC866T";
-# else
- "PC866x"; /* Unknown chip from MPC866 family */
-# endif
- break;
- case 0x09000000: pre = 'M'; mid = suf = ""; m = 1;
- if (id_str == NULL)
- id_str = "PC885"; /* 870/875/880/885 */
- break;
-
- default: suf = NULL; break;
- }
-
- if (id_str == NULL)
- id_str = "PC86x"; /* Unknown 86x chip */
- if (suf)
- printf ("%c%s%sZPnn%s", pre, id_str, mid, suf);
- else
- printf ("unknown M%s (0x%08x)", id_str, k);
-
-
-#if defined(CONFIG_SYS_8xx_CPUCLK_MIN) && defined(CONFIG_SYS_8xx_CPUCLK_MAX)
- printf (" at %s MHz [%d.%d...%d.%d MHz]\n ",
- strmhz (buf, clock),
- CONFIG_SYS_8xx_CPUCLK_MIN / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MIN % 1000000) + 50000) / 100000,
- CONFIG_SYS_8xx_CPUCLK_MAX / 1000000,
- ((CONFIG_SYS_8xx_CPUCLK_MAX % 1000000) + 50000) / 100000
- );
-#else
- printf (" at %s MHz: ", strmhz (buf, clock));
-#endif
- printf ("%u kB I-Cache %u kB D-Cache",
- checkicache () >> 10,
- checkdcache () >> 10
- );
-
- /* do we have a FEC (860T/P or 852/859/866/885)? */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
-#ifdef DEBUG
- if(clock != measure_gclk()) {
- printf ("clock %ldHz != %dHz\n", clock, measure_gclk());
- }
-#endif
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC862)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char pre = 'X';
- char *mid = "xx";
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
-
- /* this value is not documented anywhere */
- case 0x06000000: mid = "P"; suf = "0"; break;
- case 0x06010001: mid = "P"; suf = "A"; m = 1; break;
- case 0x07000003: mid = "P"; suf = "B"; m = 1; break;
- default: suf = NULL; break;
- }
-
-#ifndef CONFIG_MPC857
- if (suf)
- printf ("%cPC862%sZPnn%s", pre, mid, suf);
- else
- printf ("unknown MPC862 (0x%08x)", k);
-#else
- if (suf)
- printf ("%cPC857TZPnn%s", pre, suf); /* only 857T tested right now! */
- else
- printf ("unknown MPC857 (0x%08x)", k);
-#endif
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 862T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC823)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
- char *suf;
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
- /* MPC823 */
- case 0x20000000: suf = "0"; break;
- case 0x20010000: suf = "0.1"; break;
- case 0x20020000: suf = "Z2/3"; break;
- case 0x20020001: suf = "Z3"; break;
- case 0x21000000: suf = "A"; break;
- case 0x21010000: suf = "B"; m = 1; break;
- case 0x21010001: suf = "B2"; m = 1; break;
- /* MPC823E */
- case 0x24010000: suf = NULL;
- puts ("PPC823EZTnnB2");
- m = 1;
- break;
- default:
- suf = NULL;
- printf ("unknown MPC823 (0x%08x)", k);
- break;
- }
- if (suf)
- printf ("PPC823ZTnn%s", suf);
-
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 860T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- puts (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-
-#elif defined(CONFIG_MPC850)
-
-static int check_CPU (long clock, uint pvr, uint immr)
-{
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint k, m;
- char buf[32];
-
- /* the highest 16 bits should be 0x0050 for a 8xx */
-
- if ((pvr >> 16) != 0x0050)
- return -1;
-
- k = (immr << 16) | *((ushort *) & immap->im_cpm.cp_dparam[0xB0]);
- m = 0;
-
- switch (k) {
- case 0x20020001:
- printf ("XPC850xxZT");
- break;
- case 0x21000065:
- printf ("XPC850xxZTA");
- break;
- case 0x21010067:
- printf ("XPC850xxZTB");
- m = 1;
- break;
- case 0x21020068:
- printf ("XPC850xxZTC");
- m = 1;
- break;
- default:
- printf ("unknown MPC850 (0x%08x)", k);
- }
- printf (" at %s MHz:", strmhz (buf, clock));
-
- printf (" %u kB I-Cache", checkicache () >> 10);
- printf (" %u kB D-Cache", checkdcache () >> 10);
-
- /* lets check and see if we're running on a 850T (or P?) */
-
- immap->im_cpm.cp_fec.fec_addr_low = 0x12345678;
- if (immap->im_cpm.cp_fec.fec_addr_low == 0x12345678) {
- printf (" FEC present");
- }
-
- if (!m) {
- puts (cpu_warning);
- }
-
- putc ('\n');
-
- return 0;
-}
-#else
-#error CPU undefined
-#endif
-/* ------------------------------------------------------------------------- */
-
-int checkcpu (void)
-{
- ulong clock = gd->cpu_clk;
- uint immr = get_immr (0); /* Return full IMMR contents */
- uint pvr = get_pvr ();
-
- puts ("CPU: ");
-
- /* 850 has PARTNUM 20 */
- /* 801 has PARTNUM 10 */
- return check_CPU (clock, pvr, immr);
-}
-
-/* ------------------------------------------------------------------------- */
-/* L1 i-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 4 ways (= 16 kB) */
-
-int checkicache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_ic_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
- wr_ic_cst (IDC_DISABLE);
- __asm__ volatile ("isync");
-
- while (!((m = rd_ic_cst ()) & IDC_CERR2)) {
- wr_ic_adr (k);
- wr_ic_cst (IDC_LDLCK);
- __asm__ volatile ("isync");
-
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_ic_cst (IDC_UNALL);
- wr_ic_cst (IDC_INVALL);
-
- if (cacheon)
- wr_ic_cst (IDC_ENABLE);
- else
- wr_ic_cst (IDC_DISABLE);
-
- __asm__ volatile ("isync");
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-/* L1 d-cache */
-/* the standard 860 has 128 sets of 16 bytes in 2 ways (= 4 kB) */
-/* the 860 P (plus) has 256 sets of 16 bytes in 2 ways (= 8 kB) */
-/* call with cache disabled */
-
-int checkdcache (void)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- u32 cacheon = rd_dc_cst () & IDC_ENABLED;
-
-#ifdef CONFIG_IP86x
- u32 k = memctl->memc_br1 & ~0x00007fff; /* probe in flash memoryarea */
-#else
- u32 k = memctl->memc_br0 & ~0x00007fff; /* probe in flash memoryarea */
-#endif
- u32 m;
- u32 lines = -1;
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
- wr_dc_cst (IDC_DISABLE);
-
- while (!((m = rd_dc_cst ()) & IDC_CERR2)) {
- wr_dc_adr (k);
- wr_dc_cst (IDC_LDLCK);
- lines++;
- k += 0x10; /* the number of bytes in a cacheline */
- }
-
- wr_dc_cst (IDC_UNALL);
- wr_dc_cst (IDC_INVALL);
-
- if (cacheon)
- wr_dc_cst (IDC_ENABLE);
- else
- wr_dc_cst (IDC_DISABLE);
-
- return lines << 4;
-};
-
-/* ------------------------------------------------------------------------- */
-
-void upmconfig (uint upm, uint * table, uint size)
-{
- uint i;
- uint addr = 0;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- for (i = 0; i < size; i++) {
- memctl->memc_mdr = table[i]; /* (16-15) */
- memctl->memc_mcr = addr | upm; /* (16-16) */
- addr++;
- }
-}
-
-/* ------------------------------------------------------------------------- */
-
-#ifndef CONFIG_LWMON
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- ulong msr, addr;
-
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- immap->im_clkrst.car_plprcr |= PLPRCR_CSR; /* Checkstop Reset enable */
-
- /* Interrupts and MMU off */
- __asm__ volatile ("mtspr 81, 0");
- __asm__ volatile ("mfmsr %0":"=r" (msr));
-
- msr &= ~0x1030;
- __asm__ volatile ("mtmsr %0"::"r" (msr));
-
- /*
- * Trying to execute the next instruction at a non-existing address
- * should cause a machine check, resulting in reset
- */
-#ifdef CONFIG_SYS_RESET_ADDRESS
- addr = CONFIG_SYS_RESET_ADDRESS;
-#else
- /*
- * note: when CONFIG_SYS_MONITOR_BASE points to a RAM address, CONFIG_SYS_MONITOR_BASE
- * - sizeof (ulong) is usually a valid address. Better pick an address
- * known to be invalid on your system and assign it to CONFIG_SYS_RESET_ADDRESS.
- * "(ulong)-1" used to be a good choice for many systems...
- */
- addr = CONFIG_SYS_MONITOR_BASE - sizeof (ulong);
-#endif
- ((void (*)(void)) addr) ();
- return 1;
-}
-
-#else /* CONFIG_LWMON */
-
-/*
- * On the LWMON board, the MCLR reset input of the PIC's on the board
- * uses a 47K/1n RC combination which has a 47us time constant. The
- * low signal on the HRESET pin of the CPU is only 512 clocks = 8 us
- * and thus too short to reset the external hardware. So we use the
- * watchdog to reset the board.
- */
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- /* prevent triggering the watchdog */
- disable_interrupts ();
-
- /* make sure the watchdog is running */
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
-
- /* wait for watchdog reset */
- while (1) {};
-
- /* NOTREACHED */
- return 1;
-}
-
-#endif /* CONFIG_LWMON */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Get timebase clock frequency (like cpu_clk in Hz)
- *
- * See sections 14.2 and 14.6 of the User's Manual
- */
-unsigned long get_tbclk (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000);
- ulong oscclk, factor, pll;
-
- if (immap->im_clkrst.car_sccr & SCCR_TBS) {
- return (gd->cpu_clk / 16);
- }
-
- pll = immap->im_clkrst.car_plprcr;
-
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
-
- /*
- * For newer PQ1 chips (MPC866/87x/88x families), PLL multiplication
- * factor is calculated as follows:
- *
- * MFN
- * MFI + -------
- * MFD + 1
- * factor = -----------------
- * (PDF + 1) * 2^S
- *
- * For older chips, it's just MF field of PLPRCR plus one.
- */
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- factor = (PLPRCR_val(MFI) + PLPRCR_val(MFN)/(PLPRCR_val(MFD)+1))/
- (PLPRCR_val(PDF)+1) / (1<<PLPRCR_val(S));
- } else {
- factor = PLPRCR_val(MF)+1;
- }
-
- oscclk = gd->cpu_clk / factor;
-
- if ((immap->im_clkrst.car_sccr & SCCR_RTSEL) == 0 || factor > 2) {
- return (oscclk / 4);
- }
- return (oscclk / 16);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
- int re_enable = disable_interrupts ();
-
- reset_8xx_watchdog ((immap_t *) CONFIG_SYS_IMMR);
- if (re_enable)
- enable_interrupts ();
-}
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_LWMON)
-
-void reset_8xx_watchdog (volatile immap_t * immr)
-{
-# if defined(CONFIG_LWMON)
- /*
- * The LWMON board uses a MAX6301 Watchdog
- * with the trigger pin connected to port PA.7
- *
- * (The old board version used a MAX706TESA Watchdog, which
- * had to be handled exactly the same.)
- */
-# define WATCHDOG_BIT 0x0100
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# elif defined(CONFIG_KUP4K) || defined(CONFIG_KUP4X)
- /*
- * The KUP4 boards uses a TPS3705 Watchdog
- * with the trigger pin connected to port PA.5
- */
-# define WATCHDOG_BIT 0x0400
- immr->im_ioport.iop_papar &= ~(WATCHDOG_BIT); /* GPIO */
- immr->im_ioport.iop_padir |= WATCHDOG_BIT; /* Output */
- immr->im_ioport.iop_paodr &= ~(WATCHDOG_BIT); /* active output */
-
- immr->im_ioport.iop_padat ^= WATCHDOG_BIT; /* Toggle WDI */
-# else
- /*
- * All other boards use the MPC8xx Internal Watchdog
- */
- immr->im_siu_conf.sc_swsr = 0x556c; /* write magic1 */
- immr->im_siu_conf.sc_swsr = 0xaa39; /* write magic2 */
-# endif /* CONFIG_LWMON */
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(SCC_ENET) && defined(CONFIG_CMD_NET)
- scc_initialize(bis);
-#endif
-#if defined(FEC_ENET)
- fec_initialize(bis);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c
deleted file mode 100644
index eb0091b..0000000
--- a/cpu/mpc8xx/cpu_init.c
+++ /dev/null
@@ -1,285 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-void cpm_load_patch (volatile immap_t * immr);
-#endif
-
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f (volatile immap_t * immr)
-{
-#ifndef CONFIG_MBX
- volatile memctl8xx_t *memctl = &immr->im_memctl;
-# ifdef CONFIG_SYS_PLPRCR
- ulong mfmask;
-# endif
-#endif
- ulong reg;
-
- /* SYPCR - contains watchdog control (11-9) */
-
- immr->im_siu_conf.sc_sypcr = CONFIG_SYS_SYPCR;
-
-#if defined(CONFIG_WATCHDOG)
- reset_8xx_watchdog (immr);
-#endif /* CONFIG_WATCHDOG */
-
- /* SIUMCR - contains debug pin configuration (11-6) */
-#ifndef CONFIG_SVM_SC8xx
- immr->im_siu_conf.sc_siumcr |= CONFIG_SYS_SIUMCR;
-#else
- immr->im_siu_conf.sc_siumcr = CONFIG_SYS_SIUMCR;
-#endif
- /* initialize timebase status and control register (11-26) */
- /* unlock TBSCRK */
-
- immr->im_sitk.sitk_tbscrk = KAPWR_KEY;
- immr->im_sit.sit_tbscr = CONFIG_SYS_TBSCR;
-
- /* initialize the PIT (11-31) */
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /* System integration timers. Don't change EBDF! (15-27) */
-
- immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
- reg = immr->im_clkrst.car_sccr;
- reg &= SCCR_MASK;
- reg |= CONFIG_SYS_SCCR;
- immr->im_clkrst.car_sccr = reg;
-
- /* PLL (CPU clock) settings (15-30) */
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
-#ifndef CONFIG_MBX /* MBX board does things different */
-
- /* If CONFIG_SYS_PLPRCR (set in the various *_config.h files) tries to
- * set the MF field, then just copy CONFIG_SYS_PLPRCR over car_plprcr,
- * otherwise OR in CONFIG_SYS_PLPRCR so we do not change the current MF
- * field value.
- *
- * For newer (starting MPC866) chips PLPRCR layout is different.
- */
-#ifdef CONFIG_SYS_PLPRCR
- if (get_immr(0xFFFF) >= MPC8xx_NEW_CLK)
- mfmask = PLPRCR_MFACT_MSK;
- else
- mfmask = PLPRCR_MF_MSK;
-
- if ((CONFIG_SYS_PLPRCR & mfmask) != 0)
- reg = CONFIG_SYS_PLPRCR; /* reset control bits */
- else {
- reg = immr->im_clkrst.car_plprcr;
- reg &= mfmask; /* isolate MF-related fields */
- reg |= CONFIG_SYS_PLPRCR; /* reset control bits */
- }
- immr->im_clkrst.car_plprcr = reg;
-#endif
-
- /*
- * Memory Controller:
- */
-
- /* perform BR0 reset that MPC850 Rev. A can't guarantee */
- reg = memctl->memc_br0;
- reg &= BR_PS_MSK; /* Clear everything except Port Size bits */
- reg |= BR_V; /* then add just the "Bank Valid" bit */
- memctl->memc_br0 = reg;
-
- /* Map banks 0 (and maybe 1) to the FLASH banks 0 (and 1) at
- * preliminary addresses - these have to be modified later
- * when FLASH size has been determined
- *
- * Depending on the size of the memory region defined by
- * CONFIG_SYS_OR0_REMAP some boards (wide address mask) allow to map the
- * CONFIG_SYS_MONITOR_BASE, while others (narrower address mask) can't
- * map CONFIG_SYS_MONITOR_BASE.
- *
- * For example, for CONFIG_IVMS8, the CONFIG_SYS_MONITOR_BASE is
- * 0xff000000, but CONFIG_SYS_OR0_REMAP's address mask is 0xfff80000.
- *
- * If BR0 wasn't loaded with address base 0xff000000, then BR0's
- * base address remains as 0x00000000. However, the address mask
- * have been narrowed to 512Kb, so CONFIG_SYS_MONITOR_BASE wasn't mapped
- * into the Bank0.
- *
- * This is why CONFIG_IVMS8 and similar boards must load BR0 with
- * CONFIG_SYS_BR0_PRELIM in advance.
- *
- * [Thanks to Michael Liao for this explanation.
- * I owe him a free beer. - wd]
- */
-
-#if defined(CONFIG_GTH) || \
- defined(CONFIG_HERMES) || \
- defined(CONFIG_ICU862) || \
- defined(CONFIG_IP860) || \
- defined(CONFIG_IVML24) || \
- defined(CONFIG_IVMS8) || \
- defined(CONFIG_LWMON) || \
- defined(CONFIG_MHPC) || \
- defined(CONFIG_PCU_E) || \
- defined(CONFIG_R360MPI) || \
- defined(CONFIG_RMU) || \
- defined(CONFIG_RPXCLASSIC) || \
- defined(CONFIG_RPXLITE) || \
- defined(CONFIG_SPC1920) || \
- defined(CONFIG_SPD823TS)
-
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR0_REMAP)
- memctl->memc_or0 = CONFIG_SYS_OR0_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR1_REMAP)
- memctl->memc_or1 = CONFIG_SYS_OR1_REMAP;
-#endif
-#if defined(CONFIG_SYS_OR5_REMAP)
- memctl->memc_or5 = CONFIG_SYS_OR5_REMAP;
-#endif
-
- /* now restrict to preliminary range */
- memctl->memc_br0 = CONFIG_SYS_BR0_PRELIM;
- memctl->memc_or0 = CONFIG_SYS_OR0_PRELIM;
-
-#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM))
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-#endif
-
-#if defined(CONFIG_IP860) /* disable CS0 now that Flash is mapped on CS1 */
- memctl->memc_br0 = 0;
-#endif
-
-#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
- memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
- memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM)
- memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
- memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM)
- memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
- memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM)
- memctl->memc_or5 = CONFIG_SYS_OR5_PRELIM;
- memctl->memc_br5 = CONFIG_SYS_BR5_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM)
- memctl->memc_or6 = CONFIG_SYS_OR6_PRELIM;
- memctl->memc_br6 = CONFIG_SYS_BR6_PRELIM;
-#endif
-
-#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM)
- memctl->memc_or7 = CONFIG_SYS_OR7_PRELIM;
- memctl->memc_br7 = CONFIG_SYS_BR7_PRELIM;
-#endif
-
-#endif /* ! CONFIG_MBX */
-
- /*
- * Reset CPM
- */
- immr->im_cpm.cp_cpcr = CPM_CR_RST | CPM_CR_FLG;
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
-#ifdef CONFIG_MBX
- /*
- * on the MBX, things are a little bit different:
- * - we need to read the VPD to get board information
- * - the plprcr is set up dynamically
- * - the memory controller is set up dynamically
- */
- mbx_init ();
-#endif /* CONFIG_MBX */
-
-#ifdef CONFIG_RPXCLASSIC
- rpxclassic_init ();
-#endif
-
-#if defined(CONFIG_RPXLITE) && defined(CONFIG_ENV_IS_IN_NVRAM)
- rpxlite_init ();
-#endif
-
-#ifdef CONFIG_SYS_RCCR /* must be done before cpm_load_patch() */
- /* write config value */
- immr->im_cpm.cp_rccr = CONFIG_SYS_RCCR;
-#endif
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
- cpm_load_patch (immr); /* load mpc8xx microcode patch */
-#endif
-}
-
-/*
- * initialize higher level parts of CPU like timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_SYS_RTCSC) || defined(CONFIG_SYS_RMDS)
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base);
-#endif
-
-#ifdef CONFIG_SYS_RTCSC
- /* Unlock RTSC register */
- immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
- /* write config value */
- immr->im_sit.sit_rtcsc = CONFIG_SYS_RTCSC;
-#endif
-
-#ifdef CONFIG_SYS_RMDS
- /* write config value */
- immr->im_cpm.cp_rmds = CONFIG_SYS_RMDS;
-#endif
- return (0);
-}
diff --git a/cpu/mpc8xx/fdt.c b/cpu/mpc8xx/fdt.c
deleted file mode 100644
index 7130983..0000000
--- a/cpu/mpc8xx/fdt.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright 2008 (C) Bryan O'Donoghue
- *
- * Code copied & edited from Freescale mpc85xx stuff.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", get_tbclk(), 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_compat_u32(blob, "fsl,cpm-brg", "clock-frequency",
- gd->brg_clk, 1);
-
- /* Fixup ethernet MAC addresses */
- fdt_fixup_ethernet(blob);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-}
diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c
deleted file mode 100644
index 89c1ff9..0000000
--- a/cpu/mpc8xx/fec.c
+++ /dev/null
@@ -1,1026 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#undef ET_DEBUG
-
-#if defined(CONFIG_CMD_NET) && \
- (defined(FEC_ENET) || defined(CONFIG_ETHER_ON_FEC1) || defined(CONFIG_ETHER_ON_FEC2))
-
-/* compatibility test, if only FEC_ENET defined assume ETHER on FEC1 */
-#if defined(FEC_ENET) && !defined(CONFIG_ETHER_ON_FEC1) && !defined(CONFIG_ETHER_ON_FEC2)
-#define CONFIG_ETHER_ON_FEC1 1
-#endif
-
-/* define WANT_MII when MII support is required */
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_FEC1_PHY) || defined(CONFIG_FEC2_PHY)
-#define WANT_MII
-#else
-#undef WANT_MII
-#endif
-
-#if defined(WANT_MII)
-#include <miiphy.h>
-
-#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
-#error "CONFIG_MII has to be defined!"
-#endif
-
-#endif
-
-#if defined(CONFIG_RMII) && !defined(WANT_MII)
-#error RMII support is unusable without a working PHY.
-#endif
-
-#ifdef CONFIG_SYS_DISCOVER_PHY
-static int mii_discover_phy(struct eth_device *dev);
-#endif
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value);
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-static struct ether_fcc_info_s
-{
- int ether_index;
- int fecp_offset;
- int phy_addr;
- int actual_phy_addr;
- int initialized;
-}
- ether_fcc_info[] = {
-#if defined(CONFIG_ETHER_ON_FEC1)
- {
- 0,
- offsetof(immap_t, im_cpm.cp_fec1),
-#if defined(CONFIG_FEC1_PHY)
- CONFIG_FEC1_PHY,
-#else
- -1, /* discover */
-#endif
- -1,
- 0,
-
- },
-#endif
-#if defined(CONFIG_ETHER_ON_FEC2)
- {
- 1,
- offsetof(immap_t, im_cpm.cp_fec2),
-#if defined(CONFIG_FEC2_PHY)
- CONFIG_FEC2_PHY,
-#else
- -1,
-#endif
- -1,
- 0,
- },
-#endif
-};
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 100
-
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
-#ifdef __GNUC__
-static char txbuf[DBUF_LENGTH] __attribute__ ((aligned(8)));
-#else
-#error txbuf must be aligned.
-#endif
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * FEC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx = NULL;
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length);
-static int fec_recv(struct eth_device* dev);
-static int fec_init(struct eth_device* dev, bd_t * bd);
-static void fec_halt(struct eth_device* dev);
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-static void __mii_init(void);
-#endif
-
-int fec_initialize(bd_t *bis)
-{
- struct eth_device* dev;
- struct ether_fcc_info_s *efis;
- int i;
-
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++) {
-
- dev = malloc(sizeof(*dev));
- if (dev == NULL)
- hang();
-
- memset(dev, 0, sizeof(*dev));
-
- /* for FEC1 make sure that the name of the interface is the same
- as the old one for compatibility reasons */
- if (i == 0) {
- sprintf (dev->name, "FEC ETHERNET");
- } else {
- sprintf (dev->name, "FEC%d ETHERNET",
- ether_fcc_info[i].ether_index + 1);
- }
-
- efis = &ether_fcc_info[i];
-
- /*
- * reset actual phy addr
- */
- efis->actual_phy_addr = -1;
-
- dev->priv = efis;
- dev->init = fec_init;
- dev->halt = fec_halt;
- dev->send = fec_send;
- dev->recv = fec_recv;
-
- eth_register(dev);
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- miiphy_register(dev->name,
- fec8xx_miiphy_read, fec8xx_miiphy_write);
-#endif
- }
- return 1;
-}
-
-static int fec_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int j, rc;
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- /* section 16.9.23.3
- * Wait for ready
- */
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX not ready\n");
- }
-
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
- __asm__ ("eieio");
-
- /* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
-
- j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
-#if defined(CONFIG_ICU862)
- udelay(10);
-#else
- udelay(1);
-#endif
- j++;
- }
- if (j>=TOUT_LOOP) {
- printf("TX timeout\n");
- }
-#ifdef ET_DEBUG
- printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
-#endif
- /* return only status bits */;
- rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
-
- txIdx = (txIdx + 1) % TX_BUF_CNT;
-
- return rc;
-}
-
-static int fec_recv (struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("%s[%d] err: %x\n",
- __FUNCTION__, __LINE__,
- rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- volatile uchar *rx = NetRxPackets[rxIdx];
-
- length -= 4;
-
-#if defined(CONFIG_CMD_CDP)
- if ((rx[0] & 1) != 0
- && memcmp ((uchar *) rx, NetBcastAddr, 6) != 0
- && memcmp ((uchar *) rx, NetCDPAddr, 6) != 0)
- rx = NULL;
-#endif
- /*
- * Pass the packet up to the protocol layers.
- */
- if (rx != NULL)
- NetReceive (rx, length);
- }
-
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- __asm__ ("eieio");
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
-}
-
-/**************************************************************
- *
- * FEC Ethernet Initialization Routine
- *
- *************************************************************/
-
-#define FEC_ECNTRL_PINMUX 0x00000004
-#define FEC_ECNTRL_ETHER_EN 0x00000002
-#define FEC_ECNTRL_RESET 0x00000001
-
-#define FEC_RCNTRL_BC_REJ 0x00000010
-#define FEC_RCNTRL_PROM 0x00000008
-#define FEC_RCNTRL_MII_MODE 0x00000004
-#define FEC_RCNTRL_DRT 0x00000002
-#define FEC_RCNTRL_LOOP 0x00000001
-
-#define FEC_TCNTRL_FDEN 0x00000004
-#define FEC_TCNTRL_HBC 0x00000002
-#define FEC_TCNTRL_GTS 0x00000001
-
-#define FEC_RESET_DELAY 50
-
-#if defined(CONFIG_RMII)
-
-static inline void fec_10Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr |= mask;
-}
-
-static inline void fec_100Mbps(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- int fecidx = efis->ether_index;
- uint mask = (fecidx == 0) ? 0x0000010 : 0x0000008;
-
- if ((unsigned int)fecidx >= 2)
- hang();
-
- ((volatile immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_cptr &= ~mask;
-}
-
-#endif
-
-static inline void fec_full_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl &= ~FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl |= FEC_TCNTRL_FDEN; /* FD enable */
-}
-
-static inline void fec_half_duplex(struct eth_device *dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
-
- fecp->fec_r_cntrl |= FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl &= ~FEC_TCNTRL_FDEN; /* FD disable */
-}
-
-static void fec_pin_init(int fecidx)
-{
- bd_t *bd = gd->bd;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp;
-
- /*
- * only two FECs please
- */
- if ((unsigned int)fecidx >= 2)
- hang();
-
- if (fecidx == 0)
- fecp = &immr->im_cpm.cp_fec1;
- else
- fecp = &immr->im_cpm.cp_fec2;
-
- /*
- * Set MII speed to 2.5 MHz or slightly below.
- * * According to the MPC860T (Rev. D) Fast ethernet controller user
- * * manual (6.2.14),
- * * the MII management interface clock must be less than or equal
- * * to 2.5 MHz.
- * * This MDC frequency is equal to system clock / (2 * MII_SPEED).
- * * Then MII_SPEED = system_clock / 2 * 2,5 MHz.
- *
- * All MII configuration is done via FEC1 registers:
- */
- immr->im_cpm.cp_fec1.fec_mii_speed = ((bd->bi_intfreq + 4999999) / 5000000) << 1;
-
-#if defined(CONFIG_NETTA) || defined(CONFIG_NETPHONE) || defined(CONFIG_NETTA2)
- /* our PHYs are the limit at 2.5 MHz */
- fecp->fec_mii_speed <<= 1;
-#endif
-
-#if defined(CONFIG_MPC885_FAMILY) && defined(WANT_MII)
- /* use MDC for MII */
- immr->im_ioport.iop_pdpar |= 0x0080;
- immr->im_ioport.iop_pddir &= ~0x0080;
-#endif
-
- if (fecidx == 0) {
-#if defined(CONFIG_ETHER_ON_FEC1)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
-
- immr->im_ioport.iop_papar |= 0xf830;
- immr->im_ioport.iop_padir |= 0x0830;
- immr->im_ioport.iop_padir &= ~0xf000;
-
- immr->im_cpm.cp_pbpar |= 0x00001001;
- immr->im_cpm.cp_pbdir &= ~0x00001001;
-
- immr->im_ioport.iop_pcpar |= 0x000c;
- immr->im_ioport.iop_pcdir &= ~0x000c;
-
- immr->im_cpm.cp_pepar |= 0x00000003;
- immr->im_cpm.cp_pedir |= 0x00000003;
- immr->im_cpm.cp_peso &= ~0x00000003;
-
- immr->im_cpm.cp_cptr &= ~0x00000100;
-
-#else
-
-#if !defined(CONFIG_FEC1_PHY_NORXERR)
- immr->im_ioport.iop_papar |= 0x1000;
- immr->im_ioport.iop_padir &= ~0x1000;
-#endif
- immr->im_ioport.iop_papar |= 0xe810;
- immr->im_ioport.iop_padir |= 0x0810;
- immr->im_ioport.iop_padir &= ~0xe000;
-
- immr->im_cpm.cp_pbpar |= 0x00000001;
- immr->im_cpm.cp_pbdir &= ~0x00000001;
-
- immr->im_cpm.cp_cptr |= 0x00000100;
- immr->im_cpm.cp_cptr &= ~0x00000050;
-
-#endif /* !CONFIG_RMII */
-
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
- /*
- * Configure all of port D for MII.
- */
- immr->im_ioport.iop_pdpar = 0x1fff;
-
- /*
- * Bits moved from Rev. D onward
- */
- if ((get_immr(0) & 0xffff) < 0x0501)
- immr->im_ioport.iop_pddir = 0x1c58; /* Pre rev. D */
- else
- immr->im_ioport.iop_pddir = 0x1fff; /* Rev. D and later */
-#else
- /*
- * Configure port A for MII.
- */
-
-#if defined(CONFIG_ICU862) && defined(CONFIG_SYS_DISCOVER_PHY)
-
- /*
- * On the ICU862 board the MII-MDC pin is routed to PD8 pin
- * * of CPU, so for this board we need to configure Utopia and
- * * enable PD8 to MII-MDC function
- */
- immr->im_ioport.iop_pdpar |= 0x4080;
-#endif
-
- /*
- * Has Utopia been configured?
- */
- if (immr->im_ioport.iop_pdpar & (0x8000 >> 1)) {
- /*
- * YES - Use MUXED mode for UTOPIA bus.
- * This frees Port A for use by MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode &= ~0x80;
- } else {
- /*
- * NO - set SPLIT mode for UTOPIA bus.
- *
- * This doesn't really effect UTOPIA (which isn't
- * enabled anyway) but just tells the 862
- * to use port A for MII (see 862UM table 41-6).
- */
- immr->im_ioport.utmode |= 0x80;
- }
-#endif /* !defined(CONFIG_ICU862) */
-
-#endif /* CONFIG_ETHER_ON_FEC1 */
- } else if (fecidx == 1) {
-
-#if defined(CONFIG_ETHER_ON_FEC2)
-
-#if defined(CONFIG_MPC885_FAMILY) /* MPC87x/88x have got 2 FECs and different pinout */
-
-#if !defined(CONFIG_RMII)
- immr->im_cpm.cp_pepar |= 0x0003fffc;
- immr->im_cpm.cp_pedir |= 0x0003fffc;
- immr->im_cpm.cp_peso &= ~0x000087fc;
- immr->im_cpm.cp_peso |= 0x00037800;
-
- immr->im_cpm.cp_cptr &= ~0x00000080;
-#else
-
-#if !defined(CONFIG_FEC2_PHY_NORXERR)
- immr->im_cpm.cp_pepar |= 0x00000010;
- immr->im_cpm.cp_pedir |= 0x00000010;
- immr->im_cpm.cp_peso &= ~0x00000010;
-#endif
- immr->im_cpm.cp_pepar |= 0x00039620;
- immr->im_cpm.cp_pedir |= 0x00039620;
- immr->im_cpm.cp_peso |= 0x00031000;
- immr->im_cpm.cp_peso &= ~0x00008620;
-
- immr->im_cpm.cp_cptr |= 0x00000080;
- immr->im_cpm.cp_cptr &= ~0x00000028;
-#endif /* CONFIG_RMII */
-
-#endif /* CONFIG_MPC885_FAMILY */
-
-#endif /* CONFIG_ETHER_ON_FEC2 */
-
- }
-}
-
-static int fec_reset(volatile fec_t *fecp)
-{
- int i;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY)
- return -1;
-
- return 0;
-}
-
-static int fec_init (struct eth_device *dev, bd_t * bd)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp =
- (volatile fec_t *) (CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- if (efis->ether_index == 0) {
-#if defined(CONFIG_FADS) /* FADS family uses FPGA (BCSR) to control PHYs */
-#if defined(CONFIG_MPC885ADS)
- *(vu_char *) BCSR5 &= ~(BCSR5_MII1_EN | BCSR5_MII1_RST);
-#else
- /* configure FADS for fast (FEC) ethernet, half-duplex */
- /* The LXT970 needs about 50ms to recover from reset, so
- * wait for it by discovering the PHY before leaving eth_init().
- */
- {
- volatile uint *bcsr4 = (volatile uint *) BCSR4;
-
- *bcsr4 = (*bcsr4 & ~(BCSR4_FETH_EN | BCSR4_FETHCFG1))
- | (BCSR4_FETHCFG0 | BCSR4_FETHFDE |
- BCSR4_FETHRST);
-
- /* reset the LXT970 PHY */
- *bcsr4 &= ~BCSR4_FETHRST;
- udelay (10);
- *bcsr4 |= BCSR4_FETHRST;
- udelay (10);
- }
-#endif /* CONFIG_MPC885ADS */
-#endif /* CONFIG_FADS */
- }
-
-#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
- /* the MII interface is connected to FEC1
- * so for the miiphy_xxx function to work we must
- * call mii_init since fec_halt messes the thing up
- */
- if (efis->ether_index != 0)
- __mii_init();
-#endif
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* No need to set the IVEC register */
-
- /* Set station address
- */
-#define ea dev->enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | (ea[2] << 8) | (ea[3]);
- fecp->fec_addr_high = (ea[4] << 8) | (ea[5]);
-#undef ea
-
-#if defined(CONFIG_CMD_CDP)
- /*
- * Turn on multicast address hash table
- */
- fecp->fec_hash_table_high = 0xffffffff;
- fecp->fec_hash_table_low = 0xffffffff;
-#else
- /* Clear multicast address hash table
- */
- fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
-#endif
-
- /* Set maximum receive buffer size.
- */
- fecp->fec_r_buff_size = PKT_MAXBLR_SIZE;
-
- /* Set maximum frame length
- */
- fecp->fec_r_hash = PKT_MAXBUF_SIZE;
-
- /*
- * Setup Buffers and Buffer Desriptors
- */
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
- dpram_alloc_align (sizeof (RTXBD), 8));
-#else
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_FEC_BASE);
-#endif
- }
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Last, Tx CRC
- */
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /* Set receive and transmit descriptor base
- */
- fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]);
- fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]);
-
- /* Enable MII mode
- */
-#if 0 /* Full duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE;
- fecp->fec_x_cntrl = FEC_TCNTRL_FDEN;
-#else /* Half duplex mode */
- fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT;
- fecp->fec_x_cntrl = 0;
-#endif
-
- /* Enable big endian and don't care about SDMA FC.
- */
- fecp->fec_fun_code = 0x78000000;
-
- /*
- * Setup the pin configuration of the FEC
- */
- fec_pin_init (efis->ether_index);
-
- rxIdx = 0;
- txIdx = 0;
-
- /*
- * Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-
- if (efis->phy_addr == -1) {
-#ifdef CONFIG_SYS_DISCOVER_PHY
- /*
- * wait for the PHY to wake up after reset
- */
- efis->actual_phy_addr = mii_discover_phy (dev);
-
- if (efis->actual_phy_addr == -1) {
- printf ("Unable to discover phy!\n");
- return -1;
- }
-#else
- efis->actual_phy_addr = -1;
-#endif
- } else {
- efis->actual_phy_addr = efis->phy_addr;
- }
-
-#if defined(CONFIG_MII) && defined(CONFIG_RMII)
- /*
- * adapt the RMII speed to the speed of the phy
- */
- if (miiphy_speed (dev->name, efis->actual_phy_addr) == _100BASET) {
- fec_100Mbps (dev);
- } else {
- fec_10Mbps (dev);
- }
-#endif
-
-#if defined(CONFIG_MII)
- /*
- * adapt to the half/full speed settings
- */
- if (miiphy_duplex (dev->name, efis->actual_phy_addr) == FULL) {
- fec_full_duplex (dev);
- } else {
- fec_half_duplex (dev);
- }
-#endif
-
- /* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
-
- efis->initialized = 1;
-
- return 0;
-}
-
-
-static void fec_halt(struct eth_device* dev)
-{
- struct ether_fcc_info_s *efis = dev->priv;
- volatile fec_t *fecp = (volatile fec_t *)(CONFIG_SYS_IMMR + efis->fecp_offset);
- int i;
-
- /* avoid halt if initialized; mii gets stuck otherwise */
- if (!efis->initialized)
- return;
-
- /* Whack a reset.
- * A delay is required between a reset of the FEC block and
- * initialization of other FEC registers because the reset takes
- * some time to complete. If you don't delay, subsequent writes
- * to FEC registers might get killed by the reset routine which is
- * still in progress.
- */
-
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_RESET;
- for (i = 0;
- (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY);
- ++i) {
- udelay (1);
- }
- if (i == FEC_RESET_DELAY) {
- printf ("FEC_RESET_DELAY timeout\n");
- return;
- }
-
- efis->initialized = 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
-
-/* Make MII read/write commands for the FEC.
-*/
-
-#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \
- (REG & 0x1f) << 18) | \
- (VAL & 0xffff))
-
-/* Interrupt events/masks.
-*/
-#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */
-#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */
-#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */
-#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */
-#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */
-#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */
-#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */
-#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */
-#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */
-#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */
-
-/* PHY identification
- */
-#define PHY_ID_LXT970 0x78100000 /* LXT970 */
-#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
-#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
-#define PHY_ID_QS6612 0x01814400 /* QS6612 */
-#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
-#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
-#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
-#define PHY_ID_DM9161 0x0181B880 /* Davicom DM9161 */
-#define PHY_ID_KSM8995M 0x00221450 /* MICREL KS8995MA */
-
-/* send command to phy using mii, wait for result */
-static uint
-mii_send(uint mii_cmd)
-{
- uint mii_reply;
- volatile fec_t *ep;
- int cnt;
-
- ep = &(((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_fec);
-
- ep->fec_mii_data = mii_cmd; /* command to phy */
-
- /* wait for mii complete */
- cnt = 0;
- while (!(ep->fec_ievent & FEC_ENET_MII)) {
- if (++cnt > 1000) {
- printf("mii_send STUCK!\n");
- break;
- }
- }
- mii_reply = ep->fec_mii_data; /* result from phy */
- ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */
-#if 0
- printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
- __FILE__,__LINE__,__FUNCTION__,mii_cmd,mii_reply);
-#endif
- return (mii_reply & 0xffff); /* data read from phy */
-}
-#endif
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-static int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
- uint phyno;
- int pass;
- uint phytype;
- int phyaddr;
-
- phyaddr = -1; /* didn't find a PHY yet */
- for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
- if (pass > 1) {
- /* PHY may need more time to recover from reset.
- * The LXT970 needs 50ms typical, no maximum is
- * specified, so wait 10ms before try again.
- * With 11 passes this gives it 100ms to wake up.
- */
- udelay(10000); /* wait 10ms */
- }
- for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
- phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-#ifdef ET_DEBUG
- printf("PHY type 0x%x pass %d type ", phytype, pass);
-#endif
- if (phytype != 0xffff) {
- phyaddr = phyno;
- phytype |= mii_send(mk_mii_read(phyno,
- PHY_PHYIDR1)) << 16;
-
-#ifdef ET_DEBUG
- printf("PHY @ 0x%x pass %d type ",phyno,pass);
- switch (phytype & 0xfffffff0) {
- case PHY_ID_LXT970:
- printf("LXT970\n");
- break;
- case PHY_ID_LXT971:
- printf("LXT971\n");
- break;
- case PHY_ID_82555:
- printf("82555\n");
- break;
- case PHY_ID_QS6612:
- printf("QS6612\n");
- break;
- case PHY_ID_AMD79C784:
- printf("AMD79C784\n");
- break;
- case PHY_ID_LSI80225B:
- printf("LSI L80225/B\n");
- break;
- case PHY_ID_DM9161:
- printf("Davicom DM9161\n");
- break;
- case PHY_ID_KSM8995M:
- printf("MICREL KS8995M\n");
- break;
- default:
- printf("0x%08x\n", phytype);
- break;
- }
-#endif
- }
- }
- }
- if (phyaddr < 0) {
- printf("No PHY device found.\n");
- }
- return phyaddr;
-}
-#endif /* CONFIG_SYS_DISCOVER_PHY */
-
-#if (defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) && !defined(CONFIG_BITBANGMII)
-
-/****************************************************************************
- * mii_init -- Initialize the MII via FEC 1 for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-static void __mii_init(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile fec_t *fecp = &(immr->im_cpm.cp_fec);
-
- if (fec_reset(fecp) < 0)
- printf ("FEC_RESET_DELAY timeout\n");
-
- /* We use strictly polling mode only
- */
- fecp->fec_imask = 0;
-
- /* Clear any pending interrupt
- */
- fecp->fec_ievent = 0xffc0;
-
- /* Now enable the transmit and receive processing
- */
- fecp->fec_ecntrl = FEC_ECNTRL_PINMUX | FEC_ECNTRL_ETHER_EN;
-}
-
-void mii_init (void)
-{
- int i;
-
- __mii_init();
-
- /* Setup the pin configuration of the FEC(s)
- */
- for (i = 0; i < sizeof(ether_fcc_info) / sizeof(ether_fcc_info[0]); i++)
- fec_pin_init(ether_fcc_info[i].ether_index);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- * no PHY connected...
- * For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- * Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int fec8xx_miiphy_read(char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
-{
- short rdreg; /* register working value */
-
-#ifdef MII_DEBUG
- printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_read(addr, reg));
-
- *value = rdreg;
-#ifdef MII_DEBUG
- printf ("0x%04x\n", *value);
-#endif
- return 0;
-}
-
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
-{
- short rdreg; /* register working value */
-#ifdef MII_DEBUG
- printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
- rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
- printf ("0x%04x\n", value);
-#endif
- return 0;
-}
-#endif
-
-#endif
diff --git a/cpu/mpc8xx/fec.h b/cpu/mpc8xx/fec.h
deleted file mode 100644
index a49417c..0000000
--- a/cpu/mpc8xx/fec.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _FEC_H_
-#define _FEC_H_
-
-
-#endif /* _FEC_H_ */
diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c
deleted file mode 100644
index 338caba..0000000
--- a/cpu/mpc8xx/i2c.c
+++ /dev/null
@@ -1,707 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Back ported to the 8xx platform (from the 8260 platform) by
- * Murray.Jensen@cmst.csiro.au, 27-Jan-01.
- */
-
-#include <common.h>
-
-#ifdef CONFIG_HARD_I2C
-
-#include <commproc.h>
-#include <i2c.h>
-#ifdef CONFIG_LWMON
-#include <watchdog.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* define to enable debug messages */
-#undef DEBUG_I2C
-
-/* tx/rx timeout (we need the i2c early, so we don't use get_timer()) */
-#define TOUT_LOOP 1000000
-
-#define NUM_RX_BDS 4
-#define NUM_TX_BDS 4
-#define MAX_TX_SPACE 256
-#define I2C_RXTX_LEN 128 /* maximum tx/rx buffer length */
-
-typedef struct I2C_BD
-{
- unsigned short status;
- unsigned short length;
- unsigned char *addr;
-} I2C_BD;
-#define BD_I2C_TX_START 0x0400 /* special status for i2c: Start condition */
-
-#define BD_I2C_TX_CL 0x0001 /* collision error */
-#define BD_I2C_TX_UN 0x0002 /* underflow error */
-#define BD_I2C_TX_NAK 0x0004 /* no acknowledge error */
-#define BD_I2C_TX_ERR (BD_I2C_TX_NAK|BD_I2C_TX_UN|BD_I2C_TX_CL)
-
-#define BD_I2C_RX_ERR BD_SC_OV
-
-typedef void (*i2c_ecb_t)(int, int); /* error callback function */
-
-/* This structure keeps track of the bd and buffer space usage. */
-typedef struct i2c_state {
- int rx_idx; /* index to next free Rx BD */
- int tx_idx; /* index to next free Tx BD */
- void *rxbd; /* pointer to next free Rx BD */
- void *txbd; /* pointer to next free Tx BD */
- int tx_space; /* number of Tx bytes left */
- unsigned char *tx_buf; /* pointer to free Tx area */
- i2c_ecb_t err_cb; /* error callback function */
-} i2c_state_t;
-
-
-/* flags for i2c_send() and i2c_receive() */
-#define I2CF_ENABLE_SECONDARY 0x01 /* secondary_address is valid */
-#define I2CF_START_COND 0x02 /* tx: generate start condition */
-#define I2CF_STOP_COND 0x04 /* tx: generate stop condition */
-
-/* return codes */
-#define I2CERR_NO_BUFFERS 0x01 /* no more BDs or buffer space */
-#define I2CERR_MSG_TOO_LONG 0x02 /* tried to send/receive to much data */
-#define I2CERR_TIMEOUT 0x03 /* timeout in i2c_doio() */
-#define I2CERR_QUEUE_EMPTY 0x04 /* i2c_doio called without send/receive */
-
-/* error callback flags */
-#define I2CECB_RX_ERR 0x10 /* this is a receive error */
-#define I2CECB_RX_ERR_OV 0x02 /* receive overrun error */
-#define I2CECB_RX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TX_ERR 0x20 /* this is a transmit error */
-#define I2CECB_TX_CL 0x01 /* transmit collision error */
-#define I2CECB_TX_UN 0x02 /* transmit underflow error */
-#define I2CECB_TX_NAK 0x04 /* transmit no ack error */
-#define I2CECB_TX_MASK 0x0f /* mask for error bits */
-#define I2CECB_TIMEOUT 0x40 /* this is a timeout error */
-
-#ifdef DEBUG_I2C
-#define PRINTD(x) printf x
-#else
-#define PRINTD(x)
-#endif
-
-/*
- * Returns the best value of I2BRG to meet desired clock speed of I2C with
- * input parameters (clock speed, filter, and predivider value).
- * It returns computer speed value and the difference between it and desired
- * speed.
- */
-static inline int
-i2c_roundrate(int hz, int speed, int filter, int modval,
- int *brgval, int *totspeed)
-{
- int moddiv = 1 << (5-(modval & 3)), brgdiv, div;
-
- PRINTD(("\t[I2C] trying hz=%d, speed=%d, filter=%d, modval=%d\n",
- hz, speed, filter, modval));
-
- div = moddiv * speed;
- brgdiv = (hz + div - 1) / div;
-
- PRINTD(("\t\tmoddiv=%d, brgdiv=%d\n", moddiv, brgdiv));
-
- *brgval = ((brgdiv + 1) / 2) - 3 - (2*filter);
-
- if ((*brgval < 0) || (*brgval > 255)) {
- PRINTD(("\t\trejected brgval=%d\n", *brgval));
- return -1;
- }
-
- brgdiv = 2 * (*brgval + 3 + (2 * filter));
- div = moddiv * brgdiv ;
- *totspeed = hz / div;
-
- PRINTD(("\t\taccepted brgval=%d, totspeed=%d\n", *brgval, *totspeed));
-
- return 0;
-}
-
-/*
- * Sets the I2C clock predivider and divider to meet required clock speed.
- */
-static int
-i2c_setrate (int hz, int speed)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile i2c8xx_t *i2c = (i2c8xx_t *) & immap->im_i2c;
- int brgval,
- modval, /* 0-3 */
- bestspeed_diff = speed,
- bestspeed_brgval = 0,
- bestspeed_modval = 0,
- bestspeed_filter = 0,
- totspeed,
- filter = 0; /* Use this fixed value */
-
- for (modval = 0; modval < 4; modval++) {
- if (i2c_roundrate(hz,speed,filter,modval,&brgval,&totspeed) == 0) {
- int diff = speed - totspeed;
-
- if ((diff >= 0) && (diff < bestspeed_diff)) {
- bestspeed_diff = diff;
- bestspeed_modval = modval;
- bestspeed_brgval = brgval;
- bestspeed_filter = filter;
- }
- }
- }
-
- PRINTD (("[I2C] Best is:\n"));
- PRINTD (("[I2C] CPU=%dhz RATE=%d F=%d I2MOD=%08x I2BRG=%08x DIFF=%dhz\n",
- hz,
- speed,
- bestspeed_filter,
- bestspeed_modval,
- bestspeed_brgval,
- bestspeed_diff));
-
- i2c->i2c_i2mod |= ((bestspeed_modval & 3) << 1) | (bestspeed_filter << 3);
- i2c->i2c_i2brg = bestspeed_brgval & 0xff;
-
- PRINTD (("[I2C] i2mod=%08x i2brg=%08x\n", i2c->i2c_i2mod,
- i2c->i2c_i2brg));
-
- return 1;
-}
-
-void
-i2c_init(int speed, int slaveaddr)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
- ulong rbase, tbase;
- volatile I2C_BD *rxbd, *txbd;
- uint dpaddr;
-
-#ifdef CONFIG_SYS_I2C_INIT_BOARD
- /* call board specific i2c bus reset routine before accessing the */
- /* environment, which might be in a chip on that bus. For details */
- /* about this problem see doc/I2C_Edge_Conditions. */
- i2c_init_board();
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#else
- /* Disable relocation */
- iip->iic_rpbase = 0;
-#endif
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = iip->iic_rbase;
- if (dpaddr == 0) {
- /* need to allocate dual port ram */
- dpaddr = dpram_alloc_align(
- (NUM_RX_BDS * sizeof(I2C_BD)) + (NUM_TX_BDS * sizeof(I2C_BD)) +
- MAX_TX_SPACE, 8);
- }
-#else
- dpaddr = CPM_I2C_BASE;
-#endif
-
- /*
- * initialise data in dual port ram:
- *
- * dpaddr->rbase -> rx BD (NUM_RX_BDS * sizeof(I2C_BD) bytes)
- * tbase -> tx BD (NUM_TX_BDS * sizeof(I2C_BD) bytes)
- * tx buffer (MAX_TX_SPACE bytes)
- */
-
- rbase = dpaddr;
- tbase = rbase + NUM_RX_BDS * sizeof(I2C_BD);
-
- /* Initialize Port B I2C pins. */
- cp->cp_pbpar |= 0x00000030;
- cp->cp_pbdir |= 0x00000030;
- cp->cp_pbodr |= 0x00000030;
-
- /* Disable interrupts */
- i2c->i2c_i2mod = 0x00;
- i2c->i2c_i2cmr = 0x00;
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2add = slaveaddr;
-
- /*
- * Set the I2C BRG Clock division factor from desired i2c rate
- * and current CPU rate (we assume sccr dfbgr field is 0;
- * divide BRGCLK by 1)
- */
- PRINTD(("[I2C] Setting rate...\n"));
- i2c_setrate (gd->cpu_clk, CONFIG_SYS_I2C_SPEED) ;
-
- /* Set I2C controller in master mode */
- i2c->i2c_i2com = 0x01;
-
- /* Set SDMA bus arbitration level to 5 (SDCR) */
- immap->im_siu_conf.sc_sdcr = 0x0001 ;
-
- /* Initialize Tx/Rx parameters */
- iip->iic_rbase = rbase;
- iip->iic_tbase = tbase;
- rxbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_rbase]);
- txbd = (I2C_BD *)((unsigned char *)&cp->cp_dpmem[iip->iic_tbase]);
-
- PRINTD(("[I2C] rbase = %04x\n", iip->iic_rbase));
- PRINTD(("[I2C] tbase = %04x\n", iip->iic_tbase));
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- /* Set big endian byte order */
- iip->iic_tfcr = 0x10;
- iip->iic_rfcr = 0x10;
-
- /* Set maximum receive size. */
- iip->iic_mrblr = I2C_RXTX_LEN;
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- /*
- * Initialize required parameters if using microcode patch.
- */
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
- iip->iic_rstate = 0;
- iip->iic_tstate = 0;
-#else
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_I2C, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- do {
- __asm__ __volatile__ ("eieio");
- } while (cp->cp_cpcr & CPM_CR_FLG);
-#endif
-
- /* Clear events and interrupts */
- i2c->i2c_i2cer = 0xff;
- i2c->i2c_i2cmr = 0x00;
-}
-
-static void
-i2c_newio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
- PRINTD(("[I2C] i2c_newio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
- state->rx_idx = 0;
- state->tx_idx = 0;
- state->rxbd = (void*)&cp->cp_dpmem[iip->iic_rbase];
- state->txbd = (void*)&cp->cp_dpmem[iip->iic_tbase];
- state->tx_space = MAX_TX_SPACE;
- state->tx_buf = (uchar*)state->txbd + NUM_TX_BDS * sizeof(I2C_BD);
- state->err_cb = NULL;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)state->rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)state->txbd));
- PRINTD(("[I2C] tx_buf = %08x\n", (int)state->tx_buf));
-
- /* clear the buffer memory */
- memset((char *)state->tx_buf, 0, MAX_TX_SPACE);
-}
-
-static int
-i2c_send(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size,
- unsigned char *dataout)
-{
- volatile I2C_BD *txbd;
- int i,j;
-
- PRINTD(("[I2C] i2c_send add=%02d sec=%02d flag=%02d size=%d\n",
- address, secondary_address, flags, size));
-
- /* trying to send message larger than BD */
- if (size > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->tx_space < (2 + size))
- return I2CERR_NO_BUFFERS;
-
- txbd = (I2C_BD *)state->txbd;
- txbd->addr = state->tx_buf;
-
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- if (flags & I2CF_START_COND) {
- PRINTD(("[I2C] Formatting addresses...\n"));
- if (flags & I2CF_ENABLE_SECONDARY) {
- txbd->length = size + 2; /* Length of msg + dest addr */
- txbd->addr[0] = address << 1;
- txbd->addr[1] = secondary_address;
- i = 2;
- } else {
- txbd->length = size + 1; /* Length of msg + dest addr */
- txbd->addr[0] = address << 1; /* Write dest addr to BD */
- i = 1;
- }
- } else {
- txbd->length = size; /* Length of message */
- i = 0;
- }
-
- /* set up txbd */
- txbd->status = BD_SC_READY;
- if (flags & I2CF_START_COND)
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND)
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
-
- /* Copy data to send into buffer */
- PRINTD(("[I2C] copy data...\n"));
- for(j = 0; j < size; i++, j++)
- txbd->addr[i] = dataout[j];
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
-
- return 0;
-}
-
-static int
-i2c_receive(i2c_state_t *state,
- unsigned char address,
- unsigned char secondary_address,
- unsigned int flags,
- unsigned short size_to_expect,
- unsigned char *datain)
-{
- volatile I2C_BD *rxbd, *txbd;
-
- PRINTD(("[I2C] i2c_receive %02d %02d %02d\n", address, secondary_address, flags));
-
- /* Expected to receive too much */
- if (size_to_expect > I2C_RXTX_LEN)
- return I2CERR_MSG_TOO_LONG;
-
- /* no more free bds */
- if (state->tx_idx >= NUM_TX_BDS || state->rx_idx >= NUM_RX_BDS
- || state->tx_space < 2)
- return I2CERR_NO_BUFFERS;
-
- rxbd = (I2C_BD *)state->rxbd;
- txbd = (I2C_BD *)state->txbd;
-
- PRINTD(("[I2C] rxbd = %08x\n", (int)rxbd));
- PRINTD(("[I2C] txbd = %08x\n", (int)txbd));
-
- txbd->addr = state->tx_buf;
-
- /* set up TXBD for destination address */
- if (flags & I2CF_ENABLE_SECONDARY) {
- txbd->length = 2;
- txbd->addr[0] = address << 1; /* Write data */
- txbd->addr[1] = secondary_address; /* Internal address */
- txbd->status = BD_SC_READY;
- } else {
- txbd->length = 1 + size_to_expect;
- txbd->addr[0] = (address << 1) | 0x01;
- txbd->status = BD_SC_READY;
- memset(&txbd->addr[1], 0, txbd->length);
- }
-
- /* set up rxbd for reception */
- rxbd->status = BD_SC_EMPTY;
- rxbd->length = size_to_expect;
- rxbd->addr = datain;
-
- txbd->status |= BD_I2C_TX_START;
- if (flags & I2CF_STOP_COND) {
- txbd->status |= BD_SC_LAST | BD_SC_WRAP;
- rxbd->status |= BD_SC_WRAP;
- }
-
- PRINTD(("[I2C] txbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- txbd->length,
- txbd->status,
- txbd->addr[0],
- txbd->addr[1]));
- PRINTD(("[I2C] rxbd: length=0x%04x status=0x%04x addr[0]=0x%02x addr[1]=0x%02x\n",
- rxbd->length,
- rxbd->status,
- rxbd->addr[0],
- rxbd->addr[1]));
-
- /* advance state */
- state->tx_buf += txbd->length;
- state->tx_space -= txbd->length;
- state->tx_idx++;
- state->txbd = (void*)(txbd + 1);
- state->rx_idx++;
- state->rxbd = (void*)(rxbd + 1);
-
- return 0;
-}
-
-
-static int i2c_doio(i2c_state_t *state)
-{
- volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ;
- volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm;
- volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c;
- volatile iic_t *iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
- volatile I2C_BD *txbd, *rxbd;
- volatile int j = 0;
-
- PRINTD(("[I2C] i2c_doio\n"));
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- iip = (iic_t *)&cp->cp_dpmem[iip->iic_rpbase];
-#endif
-
- if (state->tx_idx <= 0 && state->rx_idx <= 0) {
- PRINTD(("[I2C] No I/O is queued\n"));
- return I2CERR_QUEUE_EMPTY;
- }
-
- iip->iic_rbptr = iip->iic_rbase;
- iip->iic_tbptr = iip->iic_tbase;
-
- /* Enable I2C */
- PRINTD(("[I2C] Enabling I2C...\n"));
- i2c->i2c_i2mod |= 0x01;
-
- /* Begin transmission */
- i2c->i2c_i2com |= 0x80;
-
- /* Loop until transmit & receive completed */
-
- if (state->tx_idx > 0) {
- txbd = ((I2C_BD*)state->txbd) - 1;
- PRINTD(("[I2C] Transmitting...(txbd=0x%08lx)\n", (ulong)txbd));
- while((txbd->status & BD_SC_READY) && (j++ < TOUT_LOOP)) {
- if (ctrlc()) {
- return (-1);
- }
- __asm__ __volatile__ ("eieio");
- }
- }
-
- if ((state->rx_idx > 0) && (j < TOUT_LOOP)) {
- rxbd = ((I2C_BD*)state->rxbd) - 1;
- PRINTD(("[I2C] Receiving...(rxbd=0x%08lx)\n", (ulong)rxbd));
- while((rxbd->status & BD_SC_EMPTY) && (j++ < TOUT_LOOP)) {
- if (ctrlc()) {
- return (-1);
- }
- __asm__ __volatile__ ("eieio");
- }
- }
-
- /* Turn off I2C */
- i2c->i2c_i2mod &= ~0x01;
-
- if (state->err_cb != NULL) {
- int n, i, b;
-
- /*
- * if we have an error callback function, look at the
- * error bits in the bd status and pass them back
- */
-
- if ((n = state->tx_idx) > 0) {
- for (i = 0; i < n; i++) {
- txbd = ((I2C_BD*)state->txbd) - (n - i);
- if ((b = txbd->status & BD_I2C_TX_ERR) != 0)
- (*state->err_cb)(I2CECB_TX_ERR|b, i);
- }
- }
-
- if ((n = state->rx_idx) > 0) {
- for (i = 0; i < n; i++) {
- rxbd = ((I2C_BD*)state->rxbd) - (n - i);
- if ((b = rxbd->status & BD_I2C_RX_ERR) != 0)
- (*state->err_cb)(I2CECB_RX_ERR|b, i);
- }
- }
-
- if (j >= TOUT_LOOP)
- (*state->err_cb)(I2CECB_TIMEOUT, 0);
- }
-
- return (j >= TOUT_LOOP) ? I2CERR_TIMEOUT : 0;
-}
-
-static int had_tx_nak;
-
-static void
-i2c_test_callback(int flags, int xnum)
-{
- if ((flags & I2CECB_TX_ERR) && (flags & I2CECB_TX_NAK))
- had_tx_nak = 1;
-}
-
-int i2c_probe(uchar chip)
-{
- i2c_state_t state;
- int rc;
- uchar buf[1];
-
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- i2c_newio(&state);
-
- state.err_cb = i2c_test_callback;
- had_tx_nak = 0;
-
- rc = i2c_receive(&state, chip, 0, I2CF_START_COND|I2CF_STOP_COND, 1, buf);
-
- if (rc != 0)
- return (rc);
-
- rc = i2c_doio(&state);
-
- if ((rc != 0) && (rc != I2CERR_TIMEOUT))
- return (rc);
-
- return (had_tx_nak);
-}
-
-int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
-#ifdef CONFIG_LWMON
- WATCHDOG_RESET();
-#endif
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones like
- * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
- * extra bits end up in the "chip address" bit slots. This makes
- * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_receive(&state, chip, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_receive failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_read: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
-{
- i2c_state_t state;
- uchar xaddr[4];
- int rc;
-
- xaddr[0] = (addr >> 24) & 0xFF;
- xaddr[1] = (addr >> 16) & 0xFF;
- xaddr[2] = (addr >> 8) & 0xFF;
- xaddr[3] = addr & 0xFF;
-
-#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
- /*
- * EEPROM chips that implement "address overflow" are ones like
- * Catalyst 24WC04/08/16 which has 9/10/11 bits of address and the
- * extra bits end up in the "chip address" bit slots. This makes
- * a 24WC08 (1Kbyte) chip look like four 256 byte chips.
- *
- * Note that we consider the length of the address field to still
- * be one byte because the extra address bits are hidden in the
- * chip address.
- */
- chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
-#endif
-
- i2c_newio(&state);
-
- rc = i2c_send(&state, chip, 0, I2CF_START_COND, alen, &xaddr[4-alen]);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: first i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_send(&state, 0, 0, I2CF_STOP_COND, len, buffer);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: second i2c_send failed (%d)\n", rc);
- return 1;
- }
-
- rc = i2c_doio(&state);
- if (rc != 0) {
- if (gd->have_console)
- printf("i2c_write: i2c_doio failed (%d)\n", rc);
- return 1;
- }
- return 0;
-}
-
-#endif /* CONFIG_HARD_I2C */
diff --git a/cpu/mpc8xx/interrupts.c b/cpu/mpc8xx/interrupts.c
deleted file mode 100644
index 5daa6b2..0000000
--- a/cpu/mpc8xx/interrupts.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <mpc8xx_irq.h>
-#include <asm/processor.h>
-#include <commproc.h>
-
-/************************************************************************/
-
-/*
- * CPM interrupt vector functions.
- */
-struct interrupt_action {
- interrupt_handler_t *handler;
- void *arg;
-};
-
-static struct interrupt_action cpm_vecs[CPMVEC_NR];
-static struct interrupt_action irq_vecs[NR_IRQS];
-
-static void cpm_interrupt_init (void);
-static void cpm_interrupt (void *regs);
-
-/************************************************************************/
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- *decrementer_count = get_tbclk () / CONFIG_SYS_HZ;
-
- /* disable all interrupts */
- immr->im_siu_conf.sc_simask = 0;
-
- /* Configure CPM interrupts */
- cpm_interrupt_init ();
-
- return (0);
-}
-
-/************************************************************************/
-
-/*
- * Handle external interrupts
- */
-void external_interrupt (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- int irq;
- ulong simask, newmask;
- ulong vec, v_bit;
-
- /*
- * read the SIVEC register and shift the bits down
- * to get the irq number
- */
- vec = immr->im_siu_conf.sc_sivec;
- irq = vec >> 26;
- v_bit = 0x80000000UL >> irq;
-
- /*
- * Read Interrupt Mask Register and Mask Interrupts
- */
- simask = immr->im_siu_conf.sc_simask;
- newmask = simask & (~(0xFFFF0000 >> irq));
- immr->im_siu_conf.sc_simask = newmask;
-
- if (!(irq & 0x1)) { /* External Interrupt ? */
- ulong siel;
-
- /*
- * Read Interrupt Edge/Level Register
- */
- siel = immr->im_siu_conf.sc_siel;
-
- if (siel & v_bit) { /* edge triggered interrupt ? */
- /*
- * Rewrite SIPEND Register to clear interrupt
- */
- immr->im_siu_conf.sc_sipend = v_bit;
- }
- }
-
- if (irq_vecs[irq].handler != NULL) {
- irq_vecs[irq].handler (irq_vecs[irq].arg);
- } else {
- printf ("\nBogus External Interrupt IRQ %d Vector %ld\n",
- irq, vec);
- /* turn off the bogus interrupt to avoid it from now */
- simask &= ~v_bit;
- }
- /*
- * Re-Enable old Interrupt Mask
- */
- immr->im_siu_conf.sc_simask = simask;
-}
-
-/************************************************************************/
-
-/*
- * CPM interrupt handler
- */
-static void cpm_interrupt (void *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- uint vec;
-
- /*
- * Get the vector by setting the ACK bit
- * and then reading the register.
- */
- immr->im_cpic.cpic_civr = 1;
- vec = immr->im_cpic.cpic_civr;
- vec >>= 11;
-
- if (cpm_vecs[vec].handler != NULL) {
- (*cpm_vecs[vec].handler) (cpm_vecs[vec].arg);
- } else {
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- printf ("Masking bogus CPM interrupt vector 0x%x\n", vec);
- }
- /*
- * After servicing the interrupt,
- * we have to remove the status indicator.
- */
- immr->im_cpic.cpic_cisr |= (1 << vec);
-}
-
-/*
- * The CPM can generate the error interrupt when there is a race
- * condition between generating and masking interrupts. All we have
- * to do is ACK it and return. This is a no-op function so we don't
- * need any special tests in the interrupt handler.
- */
-static void cpm_error_interrupt (void *dummy)
-{
-}
-
-/************************************************************************/
-/*
- * Install and free an interrupt handler
- */
-void irq_install_handler (int vec, interrupt_handler_t * handler,
- void *arg)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
- if (cpm_vecs[vec].handler != NULL) {
- printf ("CPM interrupt 0x%x replacing 0x%x\n",
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- cpm_vecs[vec].handler = handler;
- cpm_vecs[vec].arg = arg;
- immr->im_cpic.cpic_cimr |= (1 << vec);
-#if 0
- printf ("Install CPM interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- } else {
- /* SIU interrupt */
- if (irq_vecs[vec].handler != NULL) {
- printf ("SIU interrupt %d 0x%x replacing 0x%x\n",
- vec,
- (uint) handler,
- (uint) cpm_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
- immr->im_siu_conf.sc_simask |= 1 << (31 - vec);
-#if 0
- printf ("Install SIU interrupt for vector %d ==> %p\n",
- vec, handler);
-#endif
- }
-}
-
-void irq_free_handler (int vec)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- if ((vec & CPMVEC_OFFSET) != 0) {
- /* CPM interrupt */
- vec &= 0xffff;
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_cpic.cpic_cimr &= ~(1 << vec);
- cpm_vecs[vec].handler = NULL;
- cpm_vecs[vec].arg = NULL;
- } else {
- /* SIU interrupt */
-#if 0
- printf ("Free CPM interrupt for vector %d ==> %p\n",
- vec, cpm_vecs[vec].handler);
-#endif
- immr->im_siu_conf.sc_simask &= ~(1 << (31 - vec));
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- }
-}
-
-/************************************************************************/
-
-static void cpm_interrupt_init (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- /*
- * Initialize the CPM interrupt controller.
- */
-
- immr->im_cpic.cpic_cicr =
- (CICR_SCD_SCC4 |
- CICR_SCC_SCC3 |
- CICR_SCB_SCC2 |
- CICR_SCA_SCC1) | ((CPM_INTERRUPT / 2) << 13) | CICR_HP_MASK;
-
- immr->im_cpic.cpic_cimr = 0;
-
- /*
- * Install the error handler.
- */
- irq_install_handler (CPMVEC_ERROR, cpm_error_interrupt, NULL);
-
- immr->im_cpic.cpic_cicr |= CICR_IEN;
-
- /*
- * Install the cpm interrupt handler
- */
- irq_install_handler (CPM_INTERRUPT, cpm_interrupt, NULL);
-}
-
-/************************************************************************/
-
-/*
- * timer_interrupt - gets called when the decrementer overflows,
- * with interrupts disabled.
- * Trivial implementation - no need to be really accurate.
- */
-void timer_interrupt_cpu (struct pt_regs *regs)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if 0
- printf ("*** Timer Interrupt *** ");
-#endif
- /* Reset Timer Expired and Timers Interrupt Status */
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
- __asm__ ("nop");
- /*
- Clear TEXPS (and TMIST on older chips). SPLSS (on older
- chips) is cleared too.
-
- Bitwise OR is a read-modify-write operation so ALL bits
- which are cleared by writing `1' would be cleared by
- operations like
-
- immr->im_clkrst.car_plprcr |= PLPRCR_TEXPS;
-
- The same can be achieved by simple writing of the PLPRCR
- to itself. If a bit value should be preserved, read the
- register, ZERO the bit and write, not OR, the result back.
- */
- immr->im_clkrst.car_plprcr = immr->im_clkrst.car_plprcr;
-}
-
-/************************************************************************/
diff --git a/cpu/mpc8xx/kgdb.S b/cpu/mpc8xx/kgdb.S
deleted file mode 100644
index 2cc8fe6..0000000
--- a/cpu/mpc8xx/kgdb.S
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <mpc8xx.h>
-#include <version.h>
-
-#define CONFIG_8xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
-
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- sync
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- SYNC
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,CONFIG_SYS_CACHELINE_SIZE-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,CONFIG_SYS_CACHELINE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,CONFIG_SYS_CACHELINE_SIZE
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,CONFIG_SYS_CACHELINE_SIZE
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/cpu/mpc8xx/lcd.c b/cpu/mpc8xx/lcd.c
deleted file mode 100644
index 4b88b21..0000000
--- a/cpu/mpc8xx/lcd.c
+++ /dev/null
@@ -1,621 +0,0 @@
-/*
- * (C) Copyright 2001-2002
- * Wolfgang Denk, DENX Software Engineering -- wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
-/* #define DEBUG */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#include <version.h>
-#include <stdarg.h>
-#include <lcdvideo.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-#if defined(CONFIG_POST)
-#include <post.h>
-#endif
-#include <lcd.h>
-
-#ifdef CONFIG_LCD
-
-/************************************************************************/
-/* ** CONFIG STUFF -- should be moved to board config file */
-/************************************************************************/
-#ifndef CONFIG_LCD_INFO
-#define CONFIG_LCD_INFO /* Display Logo, (C) and system info */
-#endif
-
-#if defined(CONFIG_V37) || defined(CONFIG_EDT32F10)
-#undef CONFIG_LCD_LOGO
-#undef CONFIG_LCD_INFO
-#endif
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_KYOCERA_KCS057QV1AJ
-/*
- * Kyocera KCS057QV1AJ-G23. Passive, color, single scan.
- */
-#define LCD_BPP LCD_COLOR4
-
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- LCD_BPP, 1, 0, 1, 0, 5, 0, 0, 0
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_KYOCERA_KCS057QV1AJ */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_HITACHI_SP19X001_Z1A
-/*
- * Hitachi SP19X001-. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 154, 116, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- LCD_COLOR8, 1, 0, 1, 0, 0, 0, 0, 0
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HITACHI_SP19X001_Z1A */
-/*----------------------------------------------------------------------*/
-
-/*----------------------------------------------------------------------*/
-#ifdef CONFIG_NEC_NL6448AC33
-/*
- * NEC NL6448AC33-18. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448AC33 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC20
-/*
- * NEC NL6448BC20-08. 6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC20 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_NEC_NL6448BC33_54
-/*
- * NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 212, 158, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_NEC_NL6448BC33_54 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ104V7DS01
-/*
- * SHARP LQ104V7DS01. 6.5", 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 132, 99, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
- 3, 0, 0, 1, 1, 25, 1, 0, 33
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ104V7DS01 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_16x9
-/*
- * Sharp 320x240. Active, color, single scan. It isn't 16x9, and I am
- * not sure what it is.......
- */
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 15, 4, 0, 3
-};
-#endif /* CONFIG_SHARP_16x9 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ057Q3DC02
-/*
- * Sharp LQ057Q3DC02 display. Active, color, single scan.
- */
-#undef LCD_DF
-#define LCD_DF 12
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 15, 4, 0, 3
- /* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ057Q3DC02 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_SHARP_LQ64D341
-/*
- * Sharp LQ64D341 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 128, 16, 0, 32
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ64D341 */
-
-#ifdef CONFIG_SHARP_LQ065T9DR51U
-/*
- * Sharp LQ065T9DR51U display, 400x240. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 400, 240, 143, 79, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 248, 4, 0, 35
- /* wbl, vpw, lcdac, wbf */
-};
-#define CONFIG_LCD_INFO_BELOW_LOGO
-#endif /* CONFIG_SHARP_LQ065T9DR51U */
-
-#ifdef CONFIG_SHARP_LQ084V1DG21
-/*
- * Sharp LQ084V1DG21 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 171, 129, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_LOW,
- 3, 0, 0, 1, 1, 160, 3, 0, 48
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_SHARP_LQ084V1DG21 */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_HLD1045
-/*
- * HLD1045 display, 640x480. Active, color, single scan.
- */
-vidinfo_t panel_info = {
- 640, 480, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 160, 3, 0, 48
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_HLD1045 */
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_PRIMEVIEW_V16C6448AC
-/*
- * Prime View V16C6448AC
- */
-vidinfo_t panel_info = {
- 640, 480, 130, 98, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW, CONFIG_SYS_LOW, CONFIG_SYS_HIGH,
- 3, 0, 0, 1, 1, 144, 2, 0, 35
- /* wbl, vpw, lcdac, wbf */
-};
-#endif /* CONFIG_PRIMEVIEW_V16C6448AC */
-
-/*----------------------------------------------------------------------*/
-
-#ifdef CONFIG_OPTREX_BW
-/*
- * Optrex CBL50840-2 NF-FW 99 22 M5
- * or
- * Hitachi LMG6912RPFC-00T
- * or
- * Hitachi SP14Q002
- *
- * 320x240. Black & white.
- */
-#define OPTREX_BPP 0 /* 0 - monochrome, 1 bpp */
- /* 1 - 4 grey levels, 2 bpp */
- /* 2 - 16 grey levels, 4 bpp */
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- OPTREX_BPP, 0, 0, 0, 0, 0, 0, 0, 0, 4
-};
-#endif /* CONFIG_OPTREX_BW */
-
-/*-----------------------------------------------------------------*/
-#ifdef CONFIG_EDT32F10
-/*
- * Emerging Display Technologies 320x240. Passive, monochrome, single scan.
- */
-#define LCD_BPP LCD_MONOCHROME
-#define LCD_DF 10
-
-vidinfo_t panel_info = {
- 320, 240, 0, 0, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_HIGH, CONFIG_SYS_LOW,
- LCD_BPP, 0, 0, 0, 0, 33, 0, 0, 0
-};
-#endif
-/*----------------------------------------------------------------------*/
-
-
-int lcd_line_length;
-
-int lcd_color_fg;
-int lcd_color_bg;
-
-/*
- * Frame buffer memory information
- */
-void *lcd_base; /* Start of framebuffer memory */
-void *lcd_console_address; /* Start of console buffer */
-
-short console_col;
-short console_row;
-
-/************************************************************************/
-
-void lcd_ctrl_init (void *lcdbase);
-void lcd_enable (void);
-#if LCD_BPP == LCD_COLOR8
-void lcd_setcolreg (ushort regno,
- ushort red, ushort green, ushort blue);
-#endif
-#if LCD_BPP == LCD_MONOCHROME
-void lcd_initcolregs (void);
-#endif
-
-#if defined(CONFIG_RBC823)
-void lcd_disable (void);
-#endif
-
-/************************************************************************/
-
-/************************************************************************/
-/* ----------------- chipset specific functions ----------------------- */
-/************************************************************************/
-
-/*
- * Calculate fb size for VIDEOLFB_ATAG.
- */
-ulong calc_fbsize (void)
-{
- ulong size;
- int line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8;
-
- size = line_length * panel_info.vl_row;
-
- return size;
-}
-
-void lcd_ctrl_init (void *lcdbase)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
- uint lccrtmp;
- uint lchcr_hpc_tmp;
-
- /* Initialize the LCD control register according to the LCD
- * parameters defined. We do everything here but enable
- * the controller.
- */
-
-#ifdef CONFIG_RPXLITE
- /* This is special for RPXlite_DW Software Development Platform **[Sam]** */
- panel_info.vl_dp = CONFIG_SYS_LOW;
-#endif
-
- lccrtmp = LCDBIT (LCCR_BNUM_BIT,
- (((panel_info.vl_row * panel_info.vl_col) * (1 << LCD_BPP)) / 128));
-
- lccrtmp |= LCDBIT (LCCR_CLKP_BIT, panel_info.vl_clkp) |
- LCDBIT (LCCR_OEP_BIT, panel_info.vl_oep) |
- LCDBIT (LCCR_HSP_BIT, panel_info.vl_hsp) |
- LCDBIT (LCCR_VSP_BIT, panel_info.vl_vsp) |
- LCDBIT (LCCR_DP_BIT, panel_info.vl_dp) |
- LCDBIT (LCCR_BPIX_BIT, panel_info.vl_bpix) |
- LCDBIT (LCCR_LBW_BIT, panel_info.vl_lbw) |
- LCDBIT (LCCR_SPLT_BIT, panel_info.vl_splt) |
- LCDBIT (LCCR_CLOR_BIT, panel_info.vl_clor) |
- LCDBIT (LCCR_TFT_BIT, panel_info.vl_tft);
-
-#if 0
- lccrtmp |= ((SIU_LEVEL5 / 2) << 12);
- lccrtmp |= LCCR_EIEN;
-#endif
-
- lcdp->lcd_lccr = lccrtmp;
- lcdp->lcd_lcsr = 0xFF; /* Clear pending interrupts */
-
- /* Initialize LCD controller bus priorities.
- */
-#ifdef CONFIG_RBC823
- immr->im_siu_conf.sc_sdcr = (immr->im_siu_conf.sc_sdcr & ~0x0f) | 1; /* RAID = 01, LAID = 00 */
-#else
- immr->im_siu_conf.sc_sdcr &= ~0x0f; /* RAID = LAID = 0 */
-
- /* set SHFT/CLOCK division factor 4
- * This needs to be set based upon display type and processor
- * speed. The TFT displays run about 20 to 30 MHz.
- * I was running 64 MHz processor speed.
- * The value for this divider must be chosen so the result is
- * an integer of the processor speed (i.e., divide by 3 with
- * 64 MHz would be bad).
- */
- immr->im_clkrst.car_sccr &= ~0x1F;
- immr->im_clkrst.car_sccr |= LCD_DF; /* was 8 */
-
-#endif /* CONFIG_RBC823 */
-
-#if defined(CONFIG_RBC823)
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pddat &= 0x0300;
- immr->im_ioport.iop_pdpar |= 0x1CFF;
- immr->im_ioport.iop_pddir |= 0x1CFF;
-
- /* Configure LCD_ON, VEE_ON, CCFL_ON on port B.
- */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
- immr->im_cpm.cp_pbpar &= ~0x00005001;
- immr->im_cpm.cp_pbdir |= 0x00005001;
-#elif !defined(CONFIG_EDT32F10)
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1FFF;
- immr->im_ioport.iop_pddir |= 0x1FFF;
-
- /* Enable LCD_A/B/C on port B.
- */
- immr->im_cpm.cp_pbpar |= 0x00005001;
- immr->im_cpm.cp_pbdir |= 0x00005001;
-#else
- /* Enable LCD on port D.
- */
- immr->im_ioport.iop_pdpar |= 0x1DFF;
- immr->im_ioport.iop_pdpar &= ~0x0200;
- immr->im_ioport.iop_pddir |= 0x1FFF;
- immr->im_ioport.iop_pddat |= 0x0200;
-#endif
-
- /* Load the physical address of the linear frame buffer
- * into the LCD controller.
- * BIG NOTE: This has to be modified to load A and B depending
- * upon the split mode of the LCD.
- */
- lcdp->lcd_lcfaa = (ulong)lcd_base;
- lcdp->lcd_lcfba = (ulong)lcd_base;
-
- /* MORE HACKS...This must be updated according to 823 manual
- * for different panels.
- * Udi Finkelstein - done - see below:
- * Note: You better not try unsupported combinations such as
- * 4-bit wide passive dual scan LCD at 4/8 Bit color.
- */
- lchcr_hpc_tmp =
- (panel_info.vl_col *
- (panel_info.vl_tft ? 8 :
- (((2 - panel_info.vl_lbw) << /* 4 bit=2, 8-bit = 1 */
- /* use << to mult by: single scan = 1, dual scan = 2 */
- panel_info.vl_splt) *
- (panel_info.vl_bpix | 1)))) >> 3; /* 2/4 BPP = 1, 8/16 BPP = 3 */
-
- lcdp->lcd_lchcr = LCHCR_BO |
- LCDBIT (LCHCR_AT_BIT, 4) |
- LCDBIT (LCHCR_HPC_BIT, lchcr_hpc_tmp) |
- panel_info.vl_wbl;
-
- lcdp->lcd_lcvcr = LCDBIT (LCVCR_VPW_BIT, panel_info.vl_vpw) |
- LCDBIT (LCVCR_LCD_AC_BIT, panel_info.vl_lcdac) |
- LCDBIT (LCVCR_VPC_BIT, panel_info.vl_row) |
- panel_info.vl_wbf;
-
-}
-
-/*----------------------------------------------------------------------*/
-
-#ifdef NOT_USED_SO_FAR
-static void
-lcd_getcolreg (ushort regno, ushort *red, ushort *green, ushort *blue)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- unsigned short colreg, *cmap_ptr;
-
- cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
- colreg = *cmap_ptr;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
-
- *red = (colreg >> 8) & 0x0F;
- *green = (colreg >> 4) & 0x0F;
- *blue = colreg & 0x0F;
-}
-#endif /* NOT_USED_SO_FAR */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_COLOR8
-void
-lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- unsigned short colreg, *cmap_ptr;
-
- cmap_ptr = (unsigned short *)&cp->lcd_cmap[regno * 2];
-
- colreg = ((red & 0x0F) << 8) |
- ((green & 0x0F) << 4) |
- (blue & 0x0F) ;
-#ifdef CONFIG_SYS_INVERT_COLORS
- colreg ^= 0x0FFF;
-#endif
- *cmap_ptr = colreg;
-
- debug ("setcolreg: reg %2d @ %p: R=%02X G=%02X B=%02X => %02X%02X\n",
- regno, &(cp->lcd_cmap[regno * 2]),
- red, green, blue,
- cp->lcd_cmap[ regno * 2 ], cp->lcd_cmap[(regno * 2) + 1]);
-}
-#endif /* LCD_COLOR8 */
-
-/*----------------------------------------------------------------------*/
-
-#if LCD_BPP == LCD_MONOCHROME
-static
-void lcd_initcolregs (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(immr->im_cpm);
- ushort regno;
-
- for (regno = 0; regno < 16; regno++) {
- cp->lcd_cmap[regno * 2] = 0;
- cp->lcd_cmap[(regno * 2) + 1] = regno & 0x0f;
- }
-}
-#endif
-
-/*----------------------------------------------------------------------*/
-
-void lcd_enable (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
- /* Enable the LCD panel */
-#ifndef CONFIG_RBC823
- immr->im_siu_conf.sc_sdcr |= (1 << (31 - 25)); /* LAM = 1 */
-#endif
- lcdp->lcd_lccr |= LCCR_PON;
-
-#ifdef CONFIG_V37
- /* Turn on display backlight */
- immr->im_cpm.cp_pbpar |= 0x00008000;
- immr->im_cpm.cp_pbdir |= 0x00008000;
-#elif defined(CONFIG_RBC823)
- /* Turn on display backlight */
- immr->im_cpm.cp_pbdat |= 0x00004000;
-#endif
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
-#if defined(CONFIG_LCD) && defined(CONFIG_LWMON) && (CONFIG_POST & CONFIG_SYS_POST_SYSMON)
- /* Enable LCD later in sysmon test, only if temperature is OK */
-#else
- c |= 0x07; /* Power on CCFL, Enable CCFL, Chip Enable LCD */
-#endif
- pic_write (0x60, c);
- }
-#endif /* CONFIG_LWMON */
-
-#if defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
- unsigned long bgi, ctr;
- char *p;
-
- if ((p = getenv("lcdbgi")) != NULL) {
- bgi = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- bgi = 0xFFF;
- }
-
- if ((p = getenv("lcdctr")) != NULL) {
- ctr = simple_strtoul (p, 0, 10) & 0xFFF;
- } else {
- ctr=0x7FF;
- }
-
- r360_i2c_lcd_write(0x10, 0x01);
- r360_i2c_lcd_write(0x20, 0x01);
- r360_i2c_lcd_write(0x30 | ((bgi>>8) & 0xF), bgi & 0xFF);
- r360_i2c_lcd_write(0x40 | ((ctr>>8) & 0xF), ctr & 0xFF);
- }
-#endif /* CONFIG_R360MPI */
-#ifdef CONFIG_RBC823
- udelay(200000); /* wait 200ms */
- /* Turn VEE_ON first */
- immr->im_cpm.cp_pbdat |= 0x00000001;
- udelay(200000); /* wait 200ms */
- /* Now turn on LCD_ON */
- immr->im_cpm.cp_pbdat |= 0x00001000;
-#endif
-#ifdef CONFIG_RRVISION
- debug ("PC4->Output(1): enable LVDS\n");
- debug ("PC5->Output(0): disable PAL clock\n");
- immr->im_ioport.iop_pddir |= 0x1000;
- immr->im_ioport.iop_pcpar &= ~(0x0C00);
- immr->im_ioport.iop_pcdir |= 0x0C00 ;
- immr->im_ioport.iop_pcdat |= 0x0800 ;
- immr->im_ioport.iop_pcdat &= ~(0x0400);
- debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
- immr->im_ioport.iop_pdpar,
- immr->im_ioport.iop_pddir,
- immr->im_ioport.iop_pddat);
- debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
- immr->im_ioport.iop_pcpar,
- immr->im_ioport.iop_pcdir,
- immr->im_ioport.iop_pcdat);
-#endif
-}
-
-/*----------------------------------------------------------------------*/
-
-#if defined (CONFIG_RBC823)
-void lcd_disable (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile lcd823_t *lcdp = &immr->im_lcd;
-
-#if defined(CONFIG_LWMON)
- { uchar c = pic_read (0x60);
- c &= ~0x07; /* Power off CCFL, Disable CCFL, Chip Disable LCD */
- pic_write (0x60, c);
- }
-#elif defined(CONFIG_R360MPI)
- {
- extern void r360_i2c_lcd_write (uchar data0, uchar data1);
-
- r360_i2c_lcd_write(0x10, 0x00);
- r360_i2c_lcd_write(0x20, 0x00);
- r360_i2c_lcd_write(0x30, 0x00);
- r360_i2c_lcd_write(0x40, 0x00);
- }
-#endif /* CONFIG_LWMON */
- /* Disable the LCD panel */
- lcdp->lcd_lccr &= ~LCCR_PON;
-#ifdef CONFIG_RBC823
- /* Turn off display backlight, VEE and LCD_ON */
- immr->im_cpm.cp_pbdat &= ~0x00005001;
-#else
- immr->im_siu_conf.sc_sdcr &= ~(1 << (31 - 25)); /* LAM = 0 */
-#endif /* CONFIG_RBC823 */
-}
-#endif /* NOT_USED_SO_FAR || CONFIG_RBC823 */
-
-
-/************************************************************************/
-
-#endif /* CONFIG_LCD */
diff --git a/cpu/mpc8xx/plprcr_write.S b/cpu/mpc8xx/plprcr_write.S
deleted file mode 100644
index e325671..0000000
--- a/cpu/mpc8xx/plprcr_write.S
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <mpc8xx.h>
-#include <ppc_asm.tmpl>
-#include <asm/cache.h>
-
-#define CACHE_CMD_ENABLE 0x02000000
-#define CACHE_CMD_DISABLE 0x04000000
-#define CACHE_CMD_LOAD_LOCK 0x06000000
-#define CACHE_CMD_UNLOCK_LINE 0x08000000
-#define CACHE_CMD_UNLOCK_ALL 0x0A000000
-#define CACHE_CMD_INVALIDATE 0x0C000000
-#define SPEED_PLPRCR_WAIT_5CYC 150
-#define _CACHE_ALIGN_SIZE 16
-
-
- .text
- .align 2
- .globl plprcr_write_866
-
-/*
- * void plprcr_write_866 (long plprcr)
- * Write PLPRCR, including workaround for device errata SIU4 and SIU9.
- */
-
-plprcr_write_866:
- mfspr r10, LR /* save the Link Register value */
-
- /* turn instruction cache on (no MMU required for instructions)
- */
- lis r4, CACHE_CMD_ENABLE@h
- ori r4, r4, CACHE_CMD_ENABLE@l
- mtspr IC_CST, r4
- isync
-
- /* clear IC_CST error bits
- */
- mfspr r4, IC_CST
-
- bl plprcr_here
-
-plprcr_here:
- mflr r5
-
- /* calculate relocation offset
- */
- lis r4, plprcr_here@h
- ori r4, r4, plprcr_here@l
- sub r5, r5, r4
-
- /* calculate first address of this function
- */
- lis r6, plprcr_write_866@h
- ori r6, r6, plprcr_write_866@l
- add r6, r6, r5
-
- /* calculate end address of this function
- */
- lis r7, plprcr_end@h
- ori r7, r7, plprcr_end@l
- add r7, r7, r5
-
- /* load and lock code addresses
- */
- mr r5, r6
-
-plprcr_loop:
- mtspr IC_ADR, r5
- addi r5, r5, _CACHE_ALIGN_SIZE /* increment by one line */
-
- lis r4, CACHE_CMD_LOAD_LOCK@h
- ori r4, r4, CACHE_CMD_LOAD_LOCK@l
- mtspr IC_CST, r4
- isync
-
- cmpw r5, r7
- blt plprcr_loop
-
- /* IC_CST error bits not evaluated
- */
-
- /* switch PLPRCR
- */
- mfspr r4, IMMR /* read IMMR */
- rlwinm r4, r4, 0, 0, 15 /* only high 16 bits count */
-
- /* write sequence according to MPC866 Errata
- */
- stw r3, PLPRCR(r4)
- isync
-
- lis r3, SPEED_PLPRCR_WAIT_5CYC@h
- ori r3, r3, SPEED_PLPRCR_WAIT_5CYC@l
-
-plprcr_wait:
- cmpwi r3, 0
- beq plprcr_wait_end
- nop
- subi r3, r3, 1
- b plprcr_wait
-
-plprcr_wait_end:
-
- /* unlock instruction cache but leave it enabled
- */
- lis r4, CACHE_CMD_UNLOCK_ALL@h
- ori r4, r4, CACHE_CMD_UNLOCK_ALL@l
- mtspr IC_CST, r4
- isync
-
- mtspr LR, r10 /* restore original Link Register value */
- blr
-
-plprcr_end:
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
deleted file mode 100644
index effb967..0000000
--- a/cpu/mpc8xx/scc.c
+++ /dev/null
@@ -1,572 +0,0 @@
-/*
- * File: scc.c
- * Description:
- * Basic ET HW initialization and packet RX/TX routines
- *
- * NOTE <<<IMPORTANT: PLEASE READ>>>:
- * Do not cache Rx/Tx buffers!
- */
-
-/*
- * MPC823 <-> MC68160 Connections:
- *
- * Setup MPC823 to work with MC68160 Enhanced Ethernet
- * Serial Tranceiver as follows:
- *
- * MPC823 Signal MC68160 Comments
- * ------ ------ ------- --------
- * PA-12 ETHTX --------> TX Eth. Port Transmit Data
- * PB-18 E_TENA --------> TENA Eth. Transmit Port Enable
- * PA-5 ETHTCK <-------- TCLK Eth. Port Transmit Clock
- * PA-13 ETHRX <-------- RX Eth. Port Receive Data
- * PC-8 E_RENA <-------- RENA Eth. Receive Enable
- * PA-6 ETHRCK <-------- RCLK Eth. Port Receive Clock
- * PC-9 E_CLSN <-------- CLSN Eth. Port Collision Indication
- *
- * FADS Board Signal MC68160 Comments
- * ----------------- ------- --------
- * (BCSR1) ETHEN* --------> CS2 Eth. Port Enable
- * (BSCR4) TPSQEL* --------> TPSQEL Twisted Pair Signal Quality Error Test Enable
- * (BCSR4) TPFLDL* --------> TPFLDL Twisted Pair Full-Duplex
- * (BCSR4) ETHLOOP --------> LOOP Eth. Port Diagnostic Loop-Back
- *
- */
-
-#include <common.h>
-#include <malloc.h>
-#include <commproc.h>
-#include <net.h>
-#include <command.h>
-
-#if defined(CONFIG_CMD_NET) && defined(SCC_ENET)
-
-/* Ethernet Transmit and Receive Buffers */
-#define DBUF_LENGTH 1520
-
-#define TX_BUF_CNT 2
-
-#define TOUT_LOOP 10000 /* 10 ms to have a packet sent */
-
-static char txbuf[DBUF_LENGTH];
-
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
-
-/*
- * SCC Ethernet Tx and Rx buffer descriptors allocated at the
- * immr->udata_bd address on Dual-Port RAM
- * Provide for Double Buffering
- */
-
-typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
-} RTXBD;
-
-static RTXBD *rtx;
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length);
-static int scc_recv(struct eth_device* dev);
-static int scc_init (struct eth_device* dev, bd_t * bd);
-static void scc_halt(struct eth_device* dev);
-
-int scc_initialize(bd_t *bis)
-{
- struct eth_device* dev;
-
- dev = (struct eth_device*) malloc(sizeof *dev);
- memset(dev, 0, sizeof *dev);
-
- sprintf(dev->name, "SCC ETHERNET");
- dev->iobase = 0;
- dev->priv = 0;
- dev->init = scc_init;
- dev->halt = scc_halt;
- dev->send = scc_send;
- dev->recv = scc_recv;
-
- eth_register(dev);
-
- return 1;
-}
-
-static int scc_send(struct eth_device* dev, volatile void *packet, int length)
-{
- int i, j=0;
-#if 0
- volatile char *in, *out;
-#endif
-
- /* section 16.9.23.3
- * Wait for ready
- */
-#if 0
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY);
- out = (char *)(rtx->txbd[txIdx].cbd_bufaddr);
- in = packet;
- for(i = 0; i < length; i++) {
- *out++ = *in++;
- }
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST);
- while (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) j++;
-
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx++].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
-
- /* wrap around buffer index when necessary */
- if (txIdx >= TX_BUF_CNT) txIdx = 0;
-#endif
-
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX not ready\n");
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
- rtx->txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST |BD_ENET_TX_WRAP);
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay (1); /* will also trigger Wd if needed */
- j++;
- }
- if (j>=TOUT_LOOP) printf("TX timeout\n");
-#ifdef ET_DEBUG
- printf("cycles: %d status: %x\n", j, rtx->txbd[txIdx].cbd_sc);
-#endif
- i = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS) /* return only status bits */;
- return i;
-}
-
-static int scc_recv (struct eth_device *dev)
-{
- int length;
-
- for (;;) {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
-
- length = rtx->rxbd[rxIdx].cbd_datlen;
-
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
-#ifdef ET_DEBUG
- printf ("err: %x\n", rtx->rxbd[rxIdx].cbd_sc);
-#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- NetReceive (NetRxPackets[rxIdx], length - 4);
- }
-
-
- /* Give the buffer back to the SCC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
- (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
- }
- return length;
-}
-
-/**************************************************************
- *
- * SCC Ethernet Initialization Routine
- *
- *************************************************************/
-
-static int scc_init (struct eth_device *dev, bd_t * bis)
-{
-
- int i;
- scc_enet_t *pram_ptr;
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-#if defined(CONFIG_LWMON)
- reset_phy();
-#endif
-
-#ifdef CONFIG_FADS
-#if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
- /* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
- *((uint *) BCSR4) &= ~BCSR4_ETHLOOP;
- *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL;
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#else
- *((uint *) BCSR4) &= ~(BCSR4_ETHLOOP | BCSR4_MODEM_EN);
- *((uint *) BCSR4) |= BCSR4_TFPLDL | BCSR4_TPSQEL | BCSR4_DATA_VOICE;
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif
-#endif
-
- pram_ptr = (scc_enet_t *) & (immr->im_cpm.cp_dparam[PROFF_ENET]);
-
- rxIdx = 0;
- txIdx = 0;
-
- if (!rtx) {
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem +
- dpram_alloc_align (sizeof (RTXBD), 8));
-#else
- rtx = (RTXBD *) (immr->im_cpm.cp_dpmem + CPM_SCC_BASE);
-#endif
- }
-
-#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
- /* Configure port A pins for Txd and Rxd.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
- immr->im_ioport.iop_paodr &= ~PA_ENET_TXD;
-#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
- /* Configure port B pins for Txd and Rxd.
- */
- immr->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
- immr->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
-#else
-#error Configuration Error: exactly ONE of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
-#endif
-
-#if defined(PC_ENET_LBK)
- /* Configure port C pins to disable External Loopback
- */
- immr->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdir |= PC_ENET_LBK;
- immr->im_ioport.iop_pcso &= ~PC_ENET_LBK;
- immr->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
-#endif /* PC_ENET_LBK */
-
- /* Configure port C pins to enable CLSN and RENA.
- */
- immr->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
- immr->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
-
- /* Configure port A for TCLK and RCLK.
- */
- immr->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
- immr->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
-
- /*
- * Configure Serial Interface clock routing -- see section 16.7.5.3
- * First, clear all SCC bits to zero, then set the ones we want.
- */
-
- immr->im_cpm.cp_sicr &= ~SICR_ENET_MASK;
- immr->im_cpm.cp_sicr |= SICR_ENET_CLKRT;
-
-
- /*
- * Initialize SDCR -- see section 16.9.23.7
- * SDMA configuration register
- */
- immr->im_siu_conf.sc_sdcr = 0x01;
-
-
- /*
- * Setup SCC Ethernet Parameter RAM
- */
-
- pram_ptr->sen_genscc.scc_rfcr = 0x18; /* Normal Operation and Mot byte ordering */
- pram_ptr->sen_genscc.scc_tfcr = 0x18; /* Mot byte ordering, Normal access */
-
- pram_ptr->sen_genscc.scc_mrblr = DBUF_LENGTH; /* max. ET package len 1520 */
-
- pram_ptr->sen_genscc.scc_rbase = (unsigned int) (&rtx->rxbd[0]); /* Set RXBD tbl start at Dual Port */
- pram_ptr->sen_genscc.scc_tbase = (unsigned int) (&rtx->txbd[0]); /* Set TXBD tbl start at Dual Port */
-
- /*
- * Setup Receiver Buffer Descriptors (13.14.24.18)
- * Settings:
- * Empty, Wrap
- */
-
- for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
- rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
- }
-
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
-
- /*
- * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19)
- * Settings:
- * Add PADs to Short FRAMES, Wrap, Last, Tx CRC
- */
-
- for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc =
- (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC);
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
- rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
- }
-
- rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
-
- /*
- * Enter Command: Initialize Rx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_RX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Ethernet Specific Parameter RAM
- * see table 13-16, pg. 660,
- * pg. 681 (example with suggested settings)
- */
-
- pram_ptr->sen_cpres = ~(0x0); /* Preset CRC */
- pram_ptr->sen_cmask = 0xdebb20e3; /* Constant Mask for CRC */
- pram_ptr->sen_crcec = 0x0; /* Error Counter CRC (unused) */
- pram_ptr->sen_alec = 0x0; /* Alignment Error Counter (unused) */
- pram_ptr->sen_disfc = 0x0; /* Discard Frame Counter (unused) */
- pram_ptr->sen_pads = 0x8888; /* Short Frame PAD Characters */
-
- pram_ptr->sen_retlim = 15; /* Retry Limit Threshold */
- pram_ptr->sen_maxflr = 1518; /* MAX Frame Length Register */
- pram_ptr->sen_minflr = 64; /* MIN Frame Length Register */
-
- pram_ptr->sen_maxd1 = DBUF_LENGTH; /* MAX DMA1 Length Register */
- pram_ptr->sen_maxd2 = DBUF_LENGTH; /* MAX DMA2 Length Register */
-
- pram_ptr->sen_gaddr1 = 0x0; /* Group Address Filter 1 (unused) */
- pram_ptr->sen_gaddr2 = 0x0; /* Group Address Filter 2 (unused) */
- pram_ptr->sen_gaddr3 = 0x0; /* Group Address Filter 3 (unused) */
- pram_ptr->sen_gaddr4 = 0x0; /* Group Address Filter 4 (unused) */
-
-#define ea eth_get_dev()->enetaddr
- pram_ptr->sen_paddrh = (ea[5] << 8) + ea[4];
- pram_ptr->sen_paddrm = (ea[3] << 8) + ea[2];
- pram_ptr->sen_paddrl = (ea[1] << 8) + ea[0];
-#undef ea
-
- pram_ptr->sen_pper = 0x0; /* Persistence (unused) */
- pram_ptr->sen_iaddr1 = 0x0; /* Individual Address Filter 1 (unused) */
- pram_ptr->sen_iaddr2 = 0x0; /* Individual Address Filter 2 (unused) */
- pram_ptr->sen_iaddr3 = 0x0; /* Individual Address Filter 3 (unused) */
- pram_ptr->sen_iaddr4 = 0x0; /* Individual Address Filter 4 (unused) */
- pram_ptr->sen_taddrh = 0x0; /* Tmp Address (MSB) (unused) */
- pram_ptr->sen_taddrm = 0x0; /* Tmp Address (unused) */
- pram_ptr->sen_taddrl = 0x0; /* Tmp Address (LSB) (unused) */
-
- /*
- * Enter Command: Initialize Tx Params for SCC
- */
-
- do { /* Spin until ready to issue command */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
- /* Issue command */
- immr->im_cpm.cp_cpcr =
- ((CPM_CR_INIT_TX << 8) | (CPM_CR_ENET << 4) | CPM_CR_FLG);
- do { /* Spin until command processed */
- __asm__ ("eieio");
- } while (immr->im_cpm.cp_cpcr & CPM_CR_FLG);
-
- /*
- * Mask all Events in SCCM - we use polling mode
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_sccm = 0;
-
- /*
- * Clear Events in SCCE -- Clear bits by writing 1's
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_scce = ~(0x0);
-
-
- /*
- * Initialize GSMR High 32-Bits
- * Settings: Normal Mode
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrh = 0;
-
- /*
- * Initialize GSMR Low 32-Bits, but do not Enable Transmit/Receive
- * Settings:
- * TCI = Invert
- * TPL = 48 bits
- * TPP = Repeating 10's
- * MODE = Ethernet
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl = (SCC_GSMRL_TCI |
- SCC_GSMRL_TPL_48 |
- SCC_GSMRL_TPP_10 |
- SCC_GSMRL_MODE_ENET);
-
- /*
- * Initialize the DSR -- see section 13.14.4 (pg. 513) v0.4
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_dsr = 0xd555;
-
- /*
- * Initialize the PSMR
- * Settings:
- * CRC = 32-Bit CCITT
- * NIB = Begin searching for SFD 22 bits after RENA
- * FDE = Full Duplex Enable
- * LPB = Loopback Enable (Needed when FDE is set)
- * BRO = Reject broadcast packets
- * PROMISCOUS = Catch all packets regardless of dest. MAC adress
- */
- immr->im_cpm.cp_scc[SCC_ENET].scc_psmr = SCC_PSMR_ENCRC |
- SCC_PSMR_NIB22 |
-#if defined(CONFIG_SCC_ENET_FULL_DUPLEX)
- SCC_PSMR_FDE | SCC_PSMR_LPB |
-#endif
-#if defined(CONFIG_SCC_ENET_NO_BROADCAST)
- SCC_PSMR_BRO |
-#endif
-#if defined(CONFIG_SCC_ENET_PROMISCOUS)
- SCC_PSMR_PRO |
-#endif
- 0;
-
- /*
- * Configure Ethernet TENA Signal
- */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
- immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
- immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
- immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
- immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
- /*
- * Port C is used to control the PHY,MC68160.
- */
- immr->im_ioport.iop_pcdir |=
- (PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
- immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
- immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
- *((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
- /*
- * Port B is used to control the PHY,MC68160.
- */
- immr->im_cpm.cp_pbdir |=
- (PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
- immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
- immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
- immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
- immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#ifdef CONFIG_RPXCLASSIC
- *((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
- *((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
-#endif
-
-#ifdef CONFIG_RPXLITE
- *((uchar *) BCSR0) |= BCSR0_ETHEN;
-#endif
-
-#if defined(CONFIG_QS860T)
- /*
- * PB27=FDE-, set output low for full duplex
- * PB26=Link Test Enable, normally high output
- */
- immr->im_cpm.cp_pbdir |= 0x00000030;
- immr->im_cpm.cp_pbdat |= 0x00000020;
- immr->im_cpm.cp_pbdat &= ~0x00000010;
-#endif /* QS860T */
-
-#ifdef CONFIG_MBX
- board_ether_init ();
-#endif
-
-#if defined(CONFIG_NETVIA)
-#if defined(PA_ENET_PDN)
- immr->im_ioport.iop_papar &= ~PA_ENET_PDN;
- immr->im_ioport.iop_padir |= PA_ENET_PDN;
- immr->im_ioport.iop_padat |= PA_ENET_PDN;
-#elif defined(PB_ENET_PDN)
- immr->im_cpm.cp_pbpar &= ~PB_ENET_PDN;
- immr->im_cpm.cp_pbdir |= PB_ENET_PDN;
- immr->im_cpm.cp_pbdat |= PB_ENET_PDN;
-#elif defined(PC_ENET_PDN)
- immr->im_ioport.iop_pcpar &= ~PC_ENET_PDN;
- immr->im_ioport.iop_pcdir |= PC_ENET_PDN;
- immr->im_ioport.iop_pcdat |= PC_ENET_PDN;
-#elif defined(PD_ENET_PDN)
- immr->im_ioport.iop_pdpar &= ~PD_ENET_PDN;
- immr->im_ioport.iop_pddir |= PD_ENET_PDN;
- immr->im_ioport.iop_pddat |= PD_ENET_PDN;
-#endif
-#endif
-
- /*
- * Set the ENT/ENR bits in the GSMR Low -- Enable Transmit/Receive
- */
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- /*
- * Work around transmit problem with first eth packet
- */
-#if defined (CONFIG_FADS)
- udelay (10000); /* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
- udelay (100000); /* wait 100 ms */
-#endif
-
- return 1;
-}
-
-
-static void scc_halt (struct eth_device *dev)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
- ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- immr->im_ioport.iop_pcso &= ~(PC_ENET_CLSN | PC_ENET_RENA);
-}
-
-#if 0
-void restart (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
- immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl |=
- (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-}
-#endif
-#endif
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
deleted file mode 100644
index 664db65..0000000
--- a/cpu/mpc8xx/serial.c
+++ /dev/null
@@ -1,745 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <command.h>
-#include <serial.h>
-#include <watchdog.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */
-
-#if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */
-#define SMC_INDEX 0
-#define PROFF_SMC PROFF_SMC1
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC1
-
-#elif defined(CONFIG_8xx_CONS_SMC2) /* Console on SMC2 */
-#define SMC_INDEX 1
-#define PROFF_SMC PROFF_SMC2
-#define CPM_CR_CH_SMC CPM_CR_CH_SMC2
-
-#endif /* CONFIG_8xx_CONS_SMCx */
-
-#if defined(CONFIG_8xx_CONS_SCC1) /* Console on SCC1 */
-#define SCC_INDEX 0
-#define PROFF_SCC PROFF_SCC1
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC1
-
-#elif defined(CONFIG_8xx_CONS_SCC2) /* Console on SCC2 */
-#define SCC_INDEX 1
-#define PROFF_SCC PROFF_SCC2
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC2
-
-#elif defined(CONFIG_8xx_CONS_SCC3) /* Console on SCC3 */
-#define SCC_INDEX 2
-#define PROFF_SCC PROFF_SCC3
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC3
-
-#elif defined(CONFIG_8xx_CONS_SCC4) /* Console on SCC4 */
-#define SCC_INDEX 3
-#define PROFF_SCC PROFF_SCC4
-#define CPM_CR_CH_SCC CPM_CR_CH_SCC4
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#if !defined(CONFIG_SYS_SMC_RXBUFLEN)
-#define CONFIG_SYS_SMC_RXBUFLEN 1
-#define CONFIG_SYS_MAXIDLE 0
-#else
-#if !defined(CONFIG_SYS_MAXIDLE)
-#error "you must define CONFIG_SYS_MAXIDLE"
-#endif
-#endif
-
-typedef volatile struct serialbuffer {
- cbd_t rxbd; /* Rx BD */
- cbd_t txbd; /* Tx BD */
- uint rxindex; /* index for next character to read */
- volatile uchar rxbuf[CONFIG_SYS_SMC_RXBUFLEN];/* rx buffers */
- volatile uchar txbuf; /* tx buffers */
-} serialbuffer_t;
-
-static void serial_setdivisor(volatile cpm8xx_t *cp)
-{
- int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate;
-
- if(divisor/16>0x1000) {
- /* bad divisor, assume 50MHz clock and 9600 baud */
- divisor=(50*1000*1000 + 8*9600)/16/9600;
- }
-
-#ifdef CONFIG_SYS_BRGCLK_PRESCALE
- divisor /= CONFIG_SYS_BRGCLK_PRESCALE;
-#endif
-
- if(divisor<=0x1000) {
- cp->cp_brgc1=((divisor-1)<<1) | CPM_BRG_EN;
- } else {
- cp->cp_brgc1=((divisor/16-1)<<1) | CPM_BRG_EN | CPM_BRG_DIV16;
- }
-}
-
-#if (defined (CONFIG_8xx_CONS_SMC1) || defined (CONFIG_8xx_CONS_SMC2))
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-static void smc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SMCx
- */
-
- cp->cp_simode = 0x00000000;
-
- serial_setdivisor(cp);
-}
-
-static int smc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-#if (!defined(CONFIG_8xx_CONS_SMC1)) && (defined(CONFIG_MPC823) || defined(CONFIG_MPC850))
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
- uint dpaddr;
- volatile serialbuffer_t *rtx;
-
- /* initialize pointers to SMC */
-
- sp = (smc_t *) &(cp->cp_smc[SMC_INDEX]);
- up = (smc_uart_t *) &cp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cp->cp_dpmem[up->smc_rpbase];
-#else
- /* Disable relocation */
- up->smc_rpbase = 0;
-#endif
-
- /* Disable transmitter/receiver. */
- sp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 1;
-
- /* clear error conditions */
-#ifdef CONFIG_SYS_SDSR
- im->im_sdma.sdma_sdsr = CONFIG_SYS_SDSR;
-#else
- im->im_sdma.sdma_sdsr = 0x83;
-#endif
-
- /* clear SDMA interrupt mask */
-#ifdef CONFIG_SYS_SDMR
- im->im_sdma.sdma_sdmr = CONFIG_SYS_SDMR;
-#else
- im->im_sdma.sdma_sdmr = 0x00;
-#endif
-
-#if defined(CONFIG_8xx_CONS_SMC1)
- /* Use Port B for SMC1 instead of other functions. */
- cp->cp_pbpar |= 0x000000c0;
- cp->cp_pbdir &= ~0x000000c0;
- cp->cp_pbodr &= ~0x000000c0;
-#else /* CONFIG_8xx_CONS_SMC2 */
-# if defined(CONFIG_MPC823) || defined(CONFIG_MPC850)
- /* Use Port A for SMC2 instead of other functions. */
- ip->iop_papar |= 0x00c0;
- ip->iop_padir &= ~0x00c0;
- ip->iop_paodr &= ~0x00c0;
-# else /* must be a 860 then */
- /* Use Port B for SMC2 instead of other functions.
- */
- cp->cp_pbpar |= 0x00000c00;
- cp->cp_pbdir &= ~0x00000c00;
- cp->cp_pbodr &= ~0x00000c00;
-# endif
-#endif
-
-#if defined(CONFIG_FADS) || defined(CONFIG_ADS)
- /* Enable RS232 */
-#if defined(CONFIG_8xx_CONS_SMC1)
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_1;
-#else
- *((uint *) BCSR1) &= ~BCSR1_RS232EN_2;
-#endif
-#endif /* CONFIG_FADS */
-
-#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
- /* Enable Monitor Port Transceiver */
- *((uchar *) BCSR0) |= BCSR0_ENMONXCVR ;
-#endif /* CONFIG_RPXLITE */
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- /* allocate
- * size of struct serialbuffer with bd rx/tx, buffer rx/tx and rx index
- */
- dpaddr = dpram_alloc_align((sizeof(serialbuffer_t)), 8);
-#else
- dpaddr = CPM_SERIAL_BASE ;
-#endif
-
- rtx = (serialbuffer_t *)&cp->cp_dpmem[dpaddr];
- /* Allocate space for two buffer descriptors in the DP ram.
- * For now, this address seems OK, but it may have to
- * change with newer versions of the firmware.
- * damm: allocating space after the two buffers for rx/tx data
- */
-
- rtx->rxbd.cbd_bufaddr = (uint) &rtx->rxbuf;
- rtx->rxbd.cbd_sc = 0;
-
- rtx->txbd.cbd_bufaddr = (uint) &rtx->txbuf;
- rtx->txbd.cbd_sc = 0;
-
- /* Set up the uart parameters in the parameter ram. */
- up->smc_rbase = dpaddr;
- up->smc_tbase = dpaddr+sizeof(cbd_t);
- up->smc_rfcr = SMC_EB;
- up->smc_tfcr = SMC_EB;
-#if defined (CONFIG_SYS_SMC_UCODE_PATCH)
- up->smc_rbptr = up->smc_rbase;
- up->smc_tbptr = up->smc_tbase;
- up->smc_rstate = 0;
- up->smc_tstate = 0;
-#endif
-
-#if defined(CONFIG_MBX)
- board_serial_init();
-#endif /* CONFIG_MBX */
-
- /* Set UART mode, 8 bit, no parity, one stop.
- * Enable receive and transmit.
- */
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
-
- /* Mask all interrupts and remove anything pending.
- */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
-
-#ifdef CONFIG_SYS_SPC1920_SMC1_CLK4
- /* clock source is PLD */
-
- /* set freq to 19200 Baud */
- *((volatile uchar *) CONFIG_SYS_SPC1920_PLD_BASE+6) = 0x3;
- /* configure clk4 as input */
- im->im_ioport.iop_pdpar |= 0x800;
- im->im_ioport.iop_pddir &= ~0x800;
-
- cp->cp_simode = ((cp->cp_simode & ~0xf000) | 0x7000);
-#else
- /* Set up the baud rate generator */
- smc_setbrg ();
-#endif
-
- /* Make the first buffer the only buffer. */
- rtx->txbd.cbd_sc |= BD_SC_WRAP;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* single/multi character receive. */
- up->smc_mrblr = CONFIG_SYS_SMC_RXBUFLEN;
- up->smc_maxidl = CONFIG_SYS_MAXIDLE;
- rtx->rxindex = 0;
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SMC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- /* Enable transmitter/receiver. */
- sp->smc_smcmr |= SMCMR_REN | SMCMR_TEN;
-
- return (0);
-}
-
-static void
-smc_putc(const char c)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
- if (c == '\n')
- smc_putc ('\r');
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for last character to go. */
- rtx->txbuf = c;
- rtx->txbd.cbd_datlen = 1;
- rtx->txbd.cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (rtx->txbd.cbd_sc & BD_SC_READY) {
- WATCHDOG_RESET ();
- __asm__("eieio");
- }
-}
-
-static void
-smc_puts (const char *s)
-{
- while (*s) {
- smc_putc (*s++);
- }
-}
-
-static int
-smc_getc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
- unsigned char c;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- /* Wait for character to show up. */
- while (rtx->rxbd.cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- /* the characters are read one by one,
- * use the rxindex to know the next char to deliver
- */
- c = *(unsigned char *) (rtx->rxbd.cbd_bufaddr+rtx->rxindex);
- rtx->rxindex++;
-
- /* check if all char are readout, then make prepare for next receive */
- if (rtx->rxindex >= rtx->rxbd.cbd_datlen) {
- rtx->rxindex = 0;
- rtx->rxbd.cbd_sc |= BD_SC_EMPTY;
- }
- return(c);
-}
-
-static int
-smc_tstc(void)
-{
- volatile smc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- volatile serialbuffer_t *rtx;
-
- up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- up = (smc_uart_t *) &cpmp->cp_dpmem[up->smc_rpbase];
-#endif
-
- rtx = (serialbuffer_t *)&cpmp->cp_dpmem[up->smc_rbase];
-
- return !(rtx->rxbd.cbd_sc & BD_SC_EMPTY);
-}
-
-struct serial_device serial_smc_device =
-{
- "serial_smc",
- "SMC",
- smc_init,
- smc_setbrg,
- smc_getc,
- smc_tstc,
- smc_putc,
- smc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
-
-#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
- defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
-
-static void
-scc_setbrg (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = &(im->im_cpm);
-
- /* Set up the baud rate generator.
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCx
- */
-
- cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
- serial_setdivisor(cp);
-}
-
-static int scc_init (void)
-{
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile scc_t *sp;
- volatile scc_uart_t *up;
- volatile cbd_t *tbdf, *rbdf;
- volatile cpm8xx_t *cp = &(im->im_cpm);
- uint dpaddr;
-#if (SCC_INDEX != 2) || !defined(CONFIG_MPC850)
- volatile iop8xx_t *ip = (iop8xx_t *)&(im->im_ioport);
-#endif
-
- /* initialize pointers to SCC */
-
- sp = (scc_t *) &(cp->cp_scc[SCC_INDEX]);
- up = (scc_uart_t *) &cp->cp_dparam[PROFF_SCC];
-
-#if defined(CONFIG_LWMON) && defined(CONFIG_8xx_CONS_SCC2)
- { /* Disable Ethernet, enable Serial */
- uchar c;
-
- c = pic_read (0x61);
- c &= ~0x40; /* enable COM3 */
- c |= 0x80; /* disable Ethernet */
- pic_write (0x61, c);
-
- /* enable RTS2 */
- cp->cp_pbpar |= 0x2000;
- cp->cp_pbdat |= 0x2000;
- cp->cp_pbdir |= 0x2000;
- }
-#endif /* CONFIG_LWMON */
-
- /* Disable transmitter/receiver. */
- sp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
-#if (SCC_INDEX == 2) && defined(CONFIG_MPC850)
- /*
- * The MPC850 has SCC3 on Port B
- */
- cp->cp_pbpar |= 0x06;
- cp->cp_pbdir &= ~0x06;
- cp->cp_pbodr &= ~0x06;
-
-#elif (SCC_INDEX < 2) || !defined(CONFIG_IP860)
- /*
- * Standard configuration for SCC's is on Part A
- */
- ip->iop_papar |= ((3 << (2 * SCC_INDEX)));
- ip->iop_padir &= ~((3 << (2 * SCC_INDEX)));
- ip->iop_paodr &= ~((3 << (2 * SCC_INDEX)));
-#else
- /*
- * The IP860 has SCC3 and SCC4 on Port D
- */
- ip->iop_pdpar |= ((3 << (2 * SCC_INDEX)));
-#endif
-
- /* Allocate space for two buffer descriptors in the DP ram. */
-
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
-#else
- dpaddr = CPM_SERIAL2_BASE ;
-#endif
-
- /* Enable SDMA. */
- im->im_siu_conf.sc_sdcr = 0x0001;
-
- /* Set the physical address of the host memory buffers in
- * the buffer descriptors.
- */
-
- rbdf = (cbd_t *)&cp->cp_dpmem[dpaddr];
- rbdf->cbd_bufaddr = (uint) (rbdf+2);
- rbdf->cbd_sc = 0;
- tbdf = rbdf + 1;
- tbdf->cbd_bufaddr = ((uint) (rbdf+2)) + 1;
- tbdf->cbd_sc = 0;
-
- /* Set up the baud rate generator. */
- scc_setbrg ();
-
- /* Set up the uart parameters in the parameter ram. */
- up->scc_genscc.scc_rbase = dpaddr;
- up->scc_genscc.scc_tbase = dpaddr+sizeof(cbd_t);
-
- /* Initialize Tx/Rx parameters. */
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SCC, CPM_CR_INIT_TRX) | CPM_CR_FLG;
-
- while (cp->cp_cpcr & CPM_CR_FLG) /* wait if cp is busy */
- ;
-
- up->scc_genscc.scc_rfcr = SCC_EB | 0x05;
- up->scc_genscc.scc_tfcr = SCC_EB | 0x05;
-
- up->scc_genscc.scc_mrblr = 1; /* Single character receive */
- up->scc_maxidl = 0; /* disable max idle */
- up->scc_brkcr = 1; /* send one break character on stop TX */
- up->scc_parec = 0;
- up->scc_frmec = 0;
- up->scc_nosec = 0;
- up->scc_brkec = 0;
- up->scc_uaddr1 = 0;
- up->scc_uaddr2 = 0;
- up->scc_toseq = 0;
- up->scc_char1 = 0x8000;
- up->scc_char2 = 0x8000;
- up->scc_char3 = 0x8000;
- up->scc_char4 = 0x8000;
- up->scc_char5 = 0x8000;
- up->scc_char6 = 0x8000;
- up->scc_char7 = 0x8000;
- up->scc_char8 = 0x8000;
- up->scc_rccm = 0xc0ff;
-
- /* Set low latency / small fifo. */
- sp->scc_gsmrh = SCC_GSMRH_RFW;
-
- /* Set SCC(x) clock mode to 16x
- * See 8xx_io/commproc.c for details.
- *
- * Wire BRG1 to SCCn
- */
-
- /* Set UART mode, clock divider 16 on Tx and Rx */
- sp->scc_gsmrl &= ~0xF;
- sp->scc_gsmrl |=
- (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
-
- sp->scc_psmr = 0;
- sp->scc_psmr |= SCU_PSMR_CL;
-
- /* Mask all interrupts and remove anything pending. */
- sp->scc_sccm = 0;
- sp->scc_scce = 0xffff;
- sp->scc_dsr = 0x7e7e;
- sp->scc_psmr = 0x3000;
-
- /* Make the first buffer the only buffer. */
- tbdf->cbd_sc |= BD_SC_WRAP;
- rbdf->cbd_sc |= BD_SC_EMPTY | BD_SC_WRAP;
-
- /* Enable transmitter/receiver. */
- sp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
-
- return (0);
-}
-
-static void
-scc_putc(const char c)
-{
- volatile cbd_t *tbdf;
- volatile char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
-#ifdef CONFIG_MODEM_SUPPORT
- if (gd->be_quiet)
- return;
-#endif
-
- if (c == '\n')
- scc_putc ('\r');
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- tbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_tbase];
-
- /* Wait for last character to go. */
-
- buf = (char *)tbdf->cbd_bufaddr;
-
- *buf = c;
- tbdf->cbd_datlen = 1;
- tbdf->cbd_sc |= BD_SC_READY;
- __asm__("eieio");
-
- while (tbdf->cbd_sc & BD_SC_READY) {
- __asm__("eieio");
- WATCHDOG_RESET ();
- }
-}
-
-static void
-scc_puts (const char *s)
-{
- while (*s) {
- scc_putc (*s++);
- }
-}
-
-static int
-scc_getc(void)
-{
- volatile cbd_t *rbdf;
- volatile unsigned char *buf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
- unsigned char c;
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- /* Wait for character to show up. */
- buf = (unsigned char *)rbdf->cbd_bufaddr;
-
- while (rbdf->cbd_sc & BD_SC_EMPTY)
- WATCHDOG_RESET ();
-
- c = *buf;
- rbdf->cbd_sc |= BD_SC_EMPTY;
-
- return(c);
-}
-
-static int
-scc_tstc(void)
-{
- volatile cbd_t *rbdf;
- volatile scc_uart_t *up;
- volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cpmp = &(im->im_cpm);
-
- up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
-
- rbdf = (cbd_t *)&cpmp->cp_dpmem[up->scc_genscc.scc_rbase];
-
- return(!(rbdf->cbd_sc & BD_SC_EMPTY));
-}
-
-struct serial_device serial_scc_device =
-{
- "serial_scc",
- "SCC",
- scc_init,
- scc_setbrg,
- scc_getc,
- scc_tstc,
- scc_putc,
- scc_puts,
-};
-
-#endif /* CONFIG_8xx_CONS_SCCx */
-
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
- gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
- gd->be_quiet = 0;
-}
-#endif
-
-#if defined(CONFIG_CMD_KGDB)
-
-void
-kgdb_serial_init(void)
-{
- int i = -1;
-
- if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SMC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SMC2)
- i = 2;
-#endif
- }
- else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
- {
-#if defined(CONFIG_8xx_CONS_SCC1)
- i = 1;
-#elif defined(CONFIG_8xx_CONS_SCC2)
- i = 2;
-#elif defined(CONFIG_8xx_CONS_SCC3)
- i = 3;
-#elif defined(CONFIG_8xx_CONS_SCC4)
- i = 4;
-#endif
- }
-
- if (i >= 0)
- {
- serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
- }
-}
-
-void
-putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void
-putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int
-getDebugChar (void)
-{
- return serial_getc();
-}
-
-void
-kgdb_interruptible (int yes)
-{
- return;
-}
-#endif
-
-#endif /* CONFIG_8xx_CONS_NONE */
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
deleted file mode 100644
index f309f29..0000000
--- a/cpu/mpc8xx/speed.c
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CONFIG_SYS_MEASURE_CPUCLK) || defined(DEBUG)
-
-#define PITC_SHIFT 16
-#define PITR_SHIFT 16
-/* pitc values to time for 58/8192 seconds (about 70.8 milliseconds) */
-#define SPEED_PIT_COUNTS 58
-#define SPEED_PITC ((SPEED_PIT_COUNTS - 1) << PITC_SHIFT)
-#define SPEED_PITC_INIT ((SPEED_PIT_COUNTS + 1) << PITC_SHIFT)
-
-/* Access functions for the Machine State Register */
-static __inline__ unsigned long get_msr(void)
-{
- unsigned long msr;
-
- asm volatile("mfmsr %0" : "=r" (msr) :);
- return msr;
-}
-
-static __inline__ void set_msr(unsigned long msr)
-{
- asm volatile("mtmsr %0" : : "r" (msr));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Measure CPU clock speed (core clock GCLK1, GCLK2),
- * also determine bus clock speed (checking bus divider factor)
- *
- * (Approx. GCLK frequency in Hz)
- *
- * Initializes timer 2 and PIT, but disables them before return.
- * [Use timer 2, because MPC823 CPUs mask 0.x do not have timers 3 and 4]
- *
- * When measuring the CPU clock against the PIT, we count cpu clocks
- * for 58/8192 seconds with a prescale divide by 177 for the cpu clock.
- * These strange values for the timing interval and prescaling are used
- * because the formula for the CPU clock is:
- *
- * CPU clock = count * (177 * (8192 / 58))
- *
- * = count * 24999.7241
- *
- * which is very close to
- *
- * = count * 25000
- *
- * Since the count gives the CPU clock divided by 25000, we can get
- * the CPU clock rounded to the nearest 0.1 MHz by
- *
- * CPU clock = ((count + 2) / 4) * 100000;
- *
- * The rounding is important since the measurement is sometimes going
- * to be high or low by 0.025 MHz, depending on exactly how the clocks
- * and counters interact. By rounding we get the exact answer for any
- * CPU clock that is an even multiple of 0.1 MHz.
- */
-
-unsigned long measure_gclk(void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpmtimer8xx_t *timerp = &immr->im_cpmtimer;
- ulong timer2_val;
- ulong msr_val;
-
-#ifdef CONFIG_SYS_8XX_XIN
- /* dont use OSCM, only use EXTCLK/512 */
- immr->im_clkrst.car_sccr |= SCCR_RTSEL | SCCR_RTDIV;
-#else
- immr->im_clkrst.car_sccr &= ~(SCCR_RTSEL | SCCR_RTDIV);
-#endif
-
- /* Reset + Stop Timer 2, no cascading
- */
- timerp->cpmt_tgcr &= ~(TGCR_CAS2 | TGCR_RST2);
-
- /* Keep stopped, halt in debug mode
- */
- timerp->cpmt_tgcr |= (TGCR_FRZ2 | TGCR_STP2);
-
- /* Timer 2 setup:
- * Output ref. interrupt disable, int. clock
- * Prescale by 177. Note that prescaler divides by value + 1
- * so we must subtract 1 here.
- */
- timerp->cpmt_tmr2 = ((177 - 1) << TMR_PS_SHIFT) | TMR_ICLK_IN_GEN;
-
- timerp->cpmt_tcn2 = 0; /* reset state */
- timerp->cpmt_tgcr |= TGCR_RST2; /* enable timer 2 */
-
- /*
- * PIT setup:
- *
- * We want to time for SPEED_PITC_COUNTS counts (of 8192 Hz),
- * so the count value would be SPEED_PITC_COUNTS - 1.
- * But there would be an uncertainty in the start time of 1/4
- * count since when we enable the PIT the count is not
- * synchronized to the 32768 Hz oscillator. The trick here is
- * to start the count higher and wait until the PIT count
- * changes to the required value before starting timer 2.
- *
- * One count high should be enough, but occasionally the start
- * is off by 1 or 2 counts of 32768 Hz. With the start value
- * set two counts high it seems very reliable.
- */
-
- immr->im_sitk.sitk_pitck = KAPWR_KEY; /* PIT initialization */
- immr->im_sit.sit_pitc = SPEED_PITC_INIT;
-
- immr->im_sitk.sitk_piscrk = KAPWR_KEY;
- immr->im_sit.sit_piscr = CONFIG_SYS_PISCR;
-
- /*
- * Start measurement - disable interrupts, just in case
- */
- msr_val = get_msr ();
- set_msr (msr_val & ~MSR_EE);
-
- immr->im_sit.sit_piscr |= PISCR_PTE;
-
- /* spin until get exact count when we want to start */
- while (immr->im_sit.sit_pitr > SPEED_PITC);
-
- timerp->cpmt_tgcr &= ~TGCR_STP2; /* Start Timer 2 */
- while ((immr->im_sit.sit_piscr & PISCR_PS) == 0);
- timerp->cpmt_tgcr |= TGCR_STP2; /* Stop Timer 2 */
-
- /* re-enable external interrupts if they were on */
- set_msr (msr_val);
-
- /* Disable timer and PIT
- */
- timer2_val = timerp->cpmt_tcn2; /* save before reset timer */
-
- timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
- immr->im_sit.sit_piscr &= ~PISCR_PTE;
-
-#if defined(CONFIG_SYS_8XX_XIN)
- /* not using OSCM, using XIN, so scale appropriately */
- return (((timer2_val + 2) / 4) * (CONFIG_SYS_8XX_XIN/512))/8192 * 100000L;
-#else
- return ((timer2_val + 2) / 4) * 100000L; /* convert to Hz */
-#endif
-}
-
-#endif
-
-void get_brgclk(uint sccr)
-{
- uint divider = 0;
-
- switch((sccr&SCCR_DFBRG11)>>11){
- case 0:
- divider = 1;
- break;
- case 1:
- divider = 4;
- break;
- case 2:
- divider = 16;
- break;
- case 3:
- divider = 64;
- break;
- }
- gd->brg_clk = gd->cpu_clk/divider;
-}
-
-#if !defined(CONFIG_8xx_CPUCLK_DEFAULT)
-
-/*
- * get_clocks() fills in gd->cpu_clock depending on CONFIG_8xx_GCLK_FREQ
- * or (if it is not defined) measure_gclk() (which uses the ref clock)
- * from above.
- */
-int get_clocks (void)
-{
- uint immr = get_immr (0); /* Return full IMMR contents */
- volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000);
- uint sccr = immap->im_clkrst.car_sccr;
- /*
- * If for some reason measuring the gclk frequency won't
- * work, we return the hardwired value.
- * (For example, the cogent CMA286-60 CPU module has no
- * separate oscillator for PITRTCLK)
- */
-#if defined(CONFIG_8xx_GCLK_FREQ)
- gd->cpu_clk = CONFIG_8xx_GCLK_FREQ;
-#elif defined(CONFIG_8xx_OSCLK)
-#define PLPRCR_val(a) ((pll & PLPRCR_ ## a ## _MSK) >> PLPRCR_ ## a ## _SHIFT)
- uint pll = immap->im_clkrst.car_plprcr;
- uint clk;
-
- if ((immr & 0x0FFF) >= MPC8xx_NEW_CLK) { /* MPC866/87x/88x series */
- clk = ((CONFIG_8xx_OSCLK / (PLPRCR_val(PDF)+1)) *
- (PLPRCR_val(MFI) + PLPRCR_val(MFN) / (PLPRCR_val(MFD)+1))) /
- (1<<PLPRCR_val(S));
- } else {
- clk = CONFIG_8xx_OSCLK * (PLPRCR_val(MF)+1);
- }
- if (pll & PLPRCR_CSRC) { /* Low frequency division factor is used */
- gd->cpu_clk = clk / (2 << ((sccr >> 8) & 7));
- } else { /* High frequency division factor is used */
- gd->cpu_clk = clk / (1 << ((sccr >> 5) & 7));
- }
-#else
- gd->cpu_clk = measure_gclk();
-#endif /* CONFIG_8xx_GCLK_FREQ */
-
- if ((sccr & SCCR_EBDF11) == 0) {
- /* No Bus Divider active */
- gd->bus_clk = gd->cpu_clk;
- } else {
- /* The MPC8xx has only one BDF: half clock speed */
- gd->bus_clk = gd->cpu_clk / 2;
- }
-
- get_brgclk(sccr);
-
- return (0);
-}
-
-#else /* CONFIG_8xx_CPUCLK_DEFAULT defined, use dynamic clock setting */
-
-static long init_pll_866 (long clk);
-
-/* This function sets up PLL (init_pll_866() is called) and
- * fills gd->cpu_clk and gd->bus_clk according to the environment
- * variable 'cpuclk' or to CONFIG_8xx_CPUCLK_DEFAULT (if 'cpuclk'
- * contains invalid value).
- * This functions requires an MPC866 or newer series CPU.
- */
-int get_clocks_866 (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- char tmp[64];
- long cpuclk = 0;
- long sccr_reg;
-
- if (getenv_r ("cpuclk", tmp, sizeof (tmp)) > 0)
- cpuclk = simple_strtoul (tmp, NULL, 10) * 1000000;
-
- if ((CONFIG_SYS_8xx_CPUCLK_MIN > cpuclk) || (CONFIG_SYS_8xx_CPUCLK_MAX < cpuclk))
- cpuclk = CONFIG_8xx_CPUCLK_DEFAULT;
-
- gd->cpu_clk = init_pll_866 (cpuclk);
-#if defined(CONFIG_SYS_MEASURE_CPUCLK)
- gd->cpu_clk = measure_gclk ();
-#endif
-
- get_brgclk(immr->im_clkrst.car_sccr);
-
- /* if cpu clock <= 66 MHz then set bus division factor to 1,
- * otherwise set it to 2
- */
- sccr_reg = immr->im_clkrst.car_sccr;
- sccr_reg &= ~SCCR_EBDF11;
-
- if (gd->cpu_clk <= 66000000) {
- sccr_reg |= SCCR_EBDF00; /* bus division factor = 1 */
- gd->bus_clk = gd->cpu_clk;
- } else {
- sccr_reg |= SCCR_EBDF01; /* bus division factor = 2 */
- gd->bus_clk = gd->cpu_clk / 2;
- }
- immr->im_clkrst.car_sccr = sccr_reg;
-
- return (0);
-}
-
-/* Adjust sdram refresh rate to actual CPU clock.
- */
-int sdram_adjust_866 (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long mamr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- return (0);
-}
-
-/* Configure PLL for MPC866/859/885 CPU series
- * PLL multiplication factor is set to the value nearest to the desired clk,
- * assuming a oscclk of 10 MHz.
- */
-static long init_pll_866 (long clk)
-{
- extern void plprcr_write_866 (long);
-
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long n, plprcr;
- char mfi, mfn, mfd, s, pdf;
- long step_mfi, step_mfn;
-
- if (clk < 20000000) {
- clk *= 2;
- pdf = 1;
- } else {
- pdf = 0;
- }
-
- if (clk < 40000000) {
- s = 2;
- step_mfi = CONFIG_8xx_OSCLK / 4;
- mfd = 7;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else if (clk < 80000000) {
- s = 1;
- step_mfi = CONFIG_8xx_OSCLK / 2;
- mfd = 14;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- } else {
- s = 0;
- step_mfi = CONFIG_8xx_OSCLK;
- mfd = 29;
- step_mfn = CONFIG_8xx_OSCLK / 30;
- }
-
- /* Calculate integer part of multiplication factor
- */
- n = clk / step_mfi;
- mfi = (char)n;
-
- /* Calculate numerator of fractional part of multiplication factor
- */
- n = clk - (n * step_mfi);
- mfn = (char)(n / step_mfn);
-
- /* Calculate effective clk
- */
- n = ((mfi * step_mfi) + (mfn * step_mfn)) / (pdf + 1);
-
- immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
-
- plprcr = (immr->im_clkrst.car_plprcr & ~(PLPRCR_MFN_MSK
- | PLPRCR_MFD_MSK | PLPRCR_S_MSK
- | PLPRCR_MFI_MSK | PLPRCR_DBRMO
- | PLPRCR_PDF_MSK))
- | (mfn << PLPRCR_MFN_SHIFT)
- | (mfd << PLPRCR_MFD_SHIFT)
- | (s << PLPRCR_S_SHIFT)
- | (mfi << PLPRCR_MFI_SHIFT)
- | (pdf << PLPRCR_PDF_SHIFT);
-
- if( (mfn > 0) && ((mfd / mfn) > 10) )
- plprcr |= PLPRCR_DBRMO;
-
- plprcr_write_866 (plprcr); /* set value using SIU4/9 workaround */
- immr->im_clkrstk.cark_plprcrk = 0x00000000;
-
- return (n);
-}
-
-#endif /* CONFIG_8xx_CPUCLK_DEFAULT */
-
-#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
- && !defined(CONFIG_TQM885D)
-/*
- * Adjust sdram refresh rate to actual CPU clock
- * and set timebase source according to actual CPU clock
- */
-int adjust_sdram_tbs_8xx (void)
-{
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- long mamr;
- long sccr;
-
- mamr = immr->im_memctl.memc_mamr;
- mamr &= ~MAMR_PTA_MSK;
- mamr |= ((gd->cpu_clk / CONFIG_SYS_PTA_PER_CLK) << MAMR_PTA_SHIFT);
- immr->im_memctl.memc_mamr = mamr;
-
- if (gd->cpu_clk < 67000000) {
- sccr = immr->im_clkrst.car_sccr;
- sccr |= SCCR_TBS;
- immr->im_clkrst.car_sccr = sccr;
- }
-
- return (0);
-}
-#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
-
-/* ------------------------------------------------------------------------- */
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
deleted file mode 100644
index b2ac23e..0000000
--- a/cpu/mpc8xx/spi.c
+++ /dev/null
@@ -1,560 +0,0 @@
-/*
- * Copyright (c) 2001 Navin Boppuri / Prashant Patel
- * <nboppuri@trinetcommunication.com>,
- * <pmpatel@trinetcommunication.com>
- * Copyright (c) 2001 Gerd Mennchen <Gerd.Mennchen@icn.siemens.de>
- * Copyright (c) 2001 Wolfgang Denk, DENX Software Engineering, <wd@denx.de>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * MPC8xx CPM SPI interface.
- *
- * Parts of this code are probably not portable and/or specific to
- * the board which I used for the tests. Please send fixes/complaints
- * to wd@denx.de
- *
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-#include <post.h>
-#include <serial.h>
-
-#if (defined(CONFIG_SPI)) || (CONFIG_POST & CONFIG_SYS_POST_SPI)
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#define SPI_EEPROM_WREN 0x06
-#define SPI_EEPROM_RDSR 0x05
-#define SPI_EEPROM_READ 0x03
-#define SPI_EEPROM_WRITE 0x02
-
-/* ---------------------------------------------------------------
- * Offset for initial SPI buffers in DPRAM:
- * We need a 520 byte scratch DPRAM area to use at an early stage.
- * It is used between the two initialization calls (spi_init_f()
- * and spi_init_r()).
- * The value 0xb00 makes it far enough from the start of the data
- * area (as well as from the stack pointer).
- * --------------------------------------------------------------- */
-#ifndef CONFIG_SYS_SPI_INIT_OFFSET
-#define CONFIG_SYS_SPI_INIT_OFFSET 0xB00
-#endif
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (void *pv, int num)
-{
- int i;
- unsigned char *pc = (unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-
-#endif /* DEBUG */
-
-/* -------------------
- * Function prototypes
- * ------------------- */
-void spi_init (void);
-
-ssize_t spi_read (uchar *, int, uchar *, int);
-ssize_t spi_write (uchar *, int, uchar *, int);
-ssize_t spi_xfer (size_t);
-
-/* -------------------
- * Variables
- * ------------------- */
-
-#define MAX_BUFFER 0x104
-
-/* ----------------------------------------------------------------------
- * Initially we place the RX and TX buffers at a fixed location in DPRAM!
- * ---------------------------------------------------------------------- */
-static uchar *rxbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET];
-static uchar *txbuf =
- (uchar *)&((cpm8xx_t *)&((immap_t *)CONFIG_SYS_IMMR)->im_cpm)->cp_dpmem
- [CONFIG_SYS_SPI_INIT_OFFSET+MAX_BUFFER];
-
-/* **************************************************************************
- *
- * Function: spi_init_f
- *
- * Description: Init SPI-Controller (ROM part)
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_f (void)
-{
- unsigned int dpaddr;
-
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cpic8xx_t *cpi;
- volatile cpm8xx_t *cp;
- volatile iop8xx_t *iop;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cpi = (cpic8xx_t *)&immr->im_cpic;
- iop = (iop8xx_t *) &immr->im_ioport;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
-/* 1 */
- /* ------------------------------------------------
- * Initialize Port B SPI pins -> page 34-8 MPC860UM
- * (we are only in Master Mode !)
- * ------------------------------------------------ */
-
- /* --------------------------------------------
- * GPIO or per. Function
- * PBPAR[28] = 1 [0x00000008] -> PERI: (SPIMISO)
- * PBPAR[29] = 1 [0x00000004] -> PERI: (SPIMOSI)
- * PBPAR[30] = 1 [0x00000002] -> PERI: (SPICLK)
- * PBPAR[31] = 0 [0x00000001] -> GPIO: (CS for PCUE/CCM-EEPROM)
- * -------------------------------------------- */
- cp->cp_pbpar |= 0x0000000E; /* set bits */
- cp->cp_pbpar &= ~0x00000001; /* reset bit */
-
- /* ----------------------------------------------
- * In/Out or per. Function 0/1
- * PBDIR[28] = 1 [0x00000008] -> PERI1: SPIMISO
- * PBDIR[29] = 1 [0x00000004] -> PERI1: SPIMOSI
- * PBDIR[30] = 1 [0x00000002] -> PERI1: SPICLK
- * PBDIR[31] = 1 [0x00000001] -> GPIO OUT: CS for PCUE/CCM-EEPROM
- * ---------------------------------------------- */
- cp->cp_pbdir |= 0x0000000F;
-
- /* ----------------------------------------------
- * open drain or active output
- * PBODR[28] = 1 [0x00000008] -> open drain: SPIMISO
- * PBODR[29] = 0 [0x00000004] -> active output SPIMOSI
- * PBODR[30] = 0 [0x00000002] -> active output: SPICLK
- * PBODR[31] = 0 [0x00000001] -> active output: GPIO OUT: CS for PCUE/CCM
- * ---------------------------------------------- */
-
- cp->cp_pbodr |= 0x00000008;
- cp->cp_pbodr &= ~0x00000007;
-
- /* Initialize the parameter ram.
- * We need to make sure many things are initialized to zero
- */
- spi->spi_rstate = 0;
- spi->spi_rdp = 0;
- spi->spi_rbptr = 0;
- spi->spi_rbc = 0;
- spi->spi_rxtmp = 0;
- spi->spi_tstate = 0;
- spi->spi_tdp = 0;
- spi->spi_tbptr = 0;
- spi->spi_tbc = 0;
- spi->spi_txtmp = 0;
-
- /* Allocate space for one transmit and one receive buffer
- * descriptor in the DP ram
- */
-#ifdef CONFIG_SYS_ALLOC_DPRAM
- dpaddr = dpram_alloc_align (sizeof(cbd_t)*2, 8);
-#else
- dpaddr = CPM_SPI_BASE;
-#endif
-
-/* 3 */
- /* Set up the SPI parameters in the parameter ram */
- spi->spi_rbase = dpaddr;
- spi->spi_tbase = dpaddr + sizeof (cbd_t);
-
- /***********IMPORTANT******************/
-
- /*
- * Setting transmit and receive buffer descriptor pointers
- * initially to rbase and tbase. Only the microcode patches
- * documentation talks about initializing this pointer. This
- * is missing from the sample I2C driver. If you dont
- * initialize these pointers, the kernel hangs.
- */
- spi->spi_rbptr = spi->spi_rbase;
- spi->spi_tbptr = spi->spi_tbase;
-
-/* 4 */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- /*
- * Initialize required parameters if using microcode patch.
- */
- spi->spi_rstate = 0;
- spi->spi_tstate = 0;
-#else
- /* Init SPI Tx + Rx Parameters */
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
- cp->cp_cpcr = mk_cr_cmd(CPM_CR_CH_SPI, CPM_CR_INIT_TRX) | CPM_CR_FLG;
- while (cp->cp_cpcr & CPM_CR_FLG)
- ;
-#endif /* CONFIG_SYS_SPI_UCODE_PATCH */
-
-/* 5 */
- /* Set SDMA configuration register */
- immr->im_siu_conf.sc_sdcr = 0x0001;
-
-/* 6 */
- /* Set to big endian. */
- spi->spi_tfcr = SMC_EB;
- spi->spi_rfcr = SMC_EB;
-
-/* 7 */
- /* Set maximum receive size. */
- spi->spi_mrblr = MAX_BUFFER;
-
-/* 8 + 9 */
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- tbdf->cbd_sc &= ~BD_SC_READY;
- rbdf->cbd_sc &= ~BD_SC_EMPTY;
-
- /* Set the bd's rx and tx buffer address pointers */
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
-/* 10 + 11 */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- return;
-}
-
-/* **************************************************************************
- *
- * Function: spi_init_r
- *
- * Description: Init SPI-Controller (RAM part) -
- * The malloc engine is ready and we can move our buffers to
- * normal RAM
- *
- * return: ---
- *
- * *********************************************************************** */
-void spi_init_r (void)
-{
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- volatile immap_t *immr;
- volatile cbd_t *tbdf, *rbdf;
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- /* tx and rx buffer descriptors */
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Allocate memory for RX and TX buffers */
- rxbuf = (uchar *) malloc (MAX_BUFFER);
- txbuf = (uchar *) malloc (MAX_BUFFER);
-
- rbdf->cbd_bufaddr = (ulong) rxbuf;
- tbdf->cbd_bufaddr = (ulong) txbuf;
-
- return;
-}
-
-/****************************************************************************
- * Function: spi_write
- **************************************************************************** */
-ssize_t spi_write (uchar *addr, int alen, uchar *buffer, int len)
-{
- int i;
-
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- *txbuf = SPI_EEPROM_WREN; /* write enable */
- spi_xfer(1);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_WRITE; /* WRITE memory array */
- memcpy(alen + txbuf, buffer, len);
- spi_xfer(alen + len);
- /* ignore received data */
- for (i = 0; i < 1000; i++) {
- *txbuf = SPI_EEPROM_RDSR; /* read status */
- txbuf[1] = 0;
- spi_xfer(2);
- if (!(rxbuf[1] & 1)) {
- break;
- }
- udelay(1000);
- }
- if (i >= 1000) {
- printf ("*** spi_write: Time out while writing!\n");
- }
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_read
- **************************************************************************** */
-ssize_t spi_read (uchar *addr, int alen, uchar *buffer, int len)
-{
- memset(rxbuf, 0, MAX_BUFFER);
- memset(txbuf, 0, MAX_BUFFER);
- memcpy(txbuf, addr, alen);
- *txbuf = SPI_EEPROM_READ; /* READ memory array */
-
- /*
- * There is a bug in 860T (?) that cuts the last byte of input
- * if we're reading into DPRAM. The solution we choose here is
- * to always read len+1 bytes (we have one extra byte at the
- * end of the buffer).
- */
- spi_xfer(alen + len + 1);
- memcpy(buffer, alen + rxbuf, len);
-
- return len;
-}
-
-/****************************************************************************
- * Function: spi_xfer
- **************************************************************************** */
-ssize_t spi_xfer (size_t count)
-{
- volatile immap_t *immr;
- volatile cpm8xx_t *cp;
- volatile spi_t *spi;
- cbd_t *tbdf, *rbdf;
- ushort loop;
- int tm;
-
- DPRINT (("*** spi_xfer entered ***\n"));
-
- immr = (immap_t *) CONFIG_SYS_IMMR;
- cp = (cpm8xx_t *) &immr->im_cpm;
-
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- spi = (spi_t *)&cp->cp_dpmem[spi->spi_rpbase];
-#else
- spi = (spi_t *)&cp->cp_dparam[PROFF_SPI];
- /* Disable relocation */
- spi->spi_rpbase = 0;
-#endif
-
- tbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_tbase];
- rbdf = (cbd_t *) & cp->cp_dpmem[spi->spi_rbase];
-
- /* Set CS for device */
- cp->cp_pbdat &= ~0x0001;
-
- /* Setting tx bd status and data length */
- tbdf->cbd_sc = BD_SC_READY | BD_SC_LAST | BD_SC_WRAP;
- tbdf->cbd_datlen = count;
-
- DPRINT (("*** spi_xfer: Bytes to be xferred: %d ***\n",
- tbdf->cbd_datlen));
-
- /* Setting rx bd status and data length */
- rbdf->cbd_sc = BD_SC_EMPTY | BD_SC_WRAP;
- rbdf->cbd_datlen = 0; /* rx length has no significance */
-
- loop = cp->cp_spmode & SPMODE_LOOP;
- cp->cp_spmode = /*SPMODE_DIV16 |*/ /* BRG/16 mode not used here */
- loop |
- SPMODE_REV |
- SPMODE_MSTR |
- SPMODE_EN |
- SPMODE_LEN(8) | /* 8 Bits per char */
- SPMODE_PM(0x8) ; /* medium speed */
- cp->cp_spim = 0; /* Mask all SPI events */
- cp->cp_spie = SPI_EMASK; /* Clear all SPI events */
-
- /* start spi transfer */
- DPRINT (("*** spi_xfer: Performing transfer ...\n"));
- cp->cp_spcom |= SPI_STR; /* Start transmit */
-
- /* --------------------------------
- * Wait for SPI transmit to get out
- * or time out (1 second = 1000 ms)
- * -------------------------------- */
- for (tm=0; tm<1000; ++tm) {
- if (cp->cp_spie & SPI_TXB) { /* Tx Buffer Empty */
- DPRINT (("*** spi_xfer: Tx buffer empty\n"));
- break;
- }
- if ((tbdf->cbd_sc & BD_SC_READY) == 0) {
- DPRINT (("*** spi_xfer: Tx BD done\n"));
- break;
- }
- udelay (1000);
- }
- if (tm >= 1000) {
- printf ("*** spi_xfer: Time out while xferring to/from SPI!\n");
- }
- DPRINT (("*** spi_xfer: ... transfer ended\n"));
-
-#ifdef DEBUG
- printf ("\nspi_xfer: txbuf after xfer\n");
- memdump ((void *) txbuf, 16); /* dump of txbuf before transmit */
- printf ("spi_xfer: rxbuf after xfer\n");
- memdump ((void *) rxbuf, 16); /* dump of rxbuf after transmit */
- printf ("\n");
-#endif
-
- /* Clear CS for device */
- cp->cp_pbdat |= 0x0001;
-
- return count;
-}
-#endif /* CONFIG_SPI || (CONFIG_POST & CONFIG_SYS_POST_SPI) */
-
-/*
- * SPI test
- *
- * The Serial Peripheral Interface (SPI) is tested in the local loopback mode.
- * The interface is configured accordingly and several packets
- * are transfered. The configurable test parameters are:
- * TEST_MIN_LENGTH - minimum size of packet to transfer
- * TEST_MAX_LENGTH - maximum size of packet to transfer
- * TEST_NUM - number of tests
- */
-
-#if CONFIG_POST & CONFIG_SYS_POST_SPI
-
-#define TEST_MIN_LENGTH 1
-#define TEST_MAX_LENGTH MAX_BUFFER
-#define TEST_NUM 1
-
-static void packet_fill (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++)
- {
- packet[i] = c++;
- }
-}
-
-static int packet_check (char * packet, int length)
-{
- char c = (char) length;
- int i;
-
- for (i = 0; i < length; i++) {
- if (packet[i] != c++) return -1;
- }
-
- return 0;
-}
-
-int spi_post_test (int flags)
-{
- int res = -1;
- volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
- volatile cpm8xx_t *cp = (cpm8xx_t *) & immr->im_cpm;
- int i;
- int l;
-
- spi_init_f ();
- spi_init_r ();
-
- cp->cp_spmode |= SPMODE_LOOP;
-
- for (i = 0; i < TEST_NUM; i++) {
- for (l = TEST_MIN_LENGTH; l <= TEST_MAX_LENGTH; l += 8) {
- packet_fill ((char *)txbuf, l);
-
- spi_xfer (l);
-
- if (packet_check ((char *)rxbuf, l) < 0) {
- goto Done;
- }
- }
- }
-
- res = 0;
-
- Done:
-
- cp->cp_spmode &= ~SPMODE_LOOP;
-
- /*
- * SCC2 parameter RAM space overlaps
- * the SPI parameter RAM space. So we need to restore
- * the SCC2 configuration if it is used by UART.
- */
-
-#if !defined(CONFIG_8xx_CONS_NONE)
- serial_reinit_all ();
-#endif
-
- if (res != 0) {
- post_log ("SPI test failed\n");
- }
-
- return res;
-}
-#endif /* CONFIG_POST & CONFIG_SYS_POST_SPI */
diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S
deleted file mode 100644
index 7cf602f..0000000
--- a/cpu/mpc8xx/start.S
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* U-Boot - Startup Code for PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0x00000100 and the code is executed
- * from flash. The code is organized to be at an other address
- * in memory, but as long we don't jump around before relocating,
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memory map.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <mpc8xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define CONFIG_8xx 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME | MSR_RI ) /* Machine Check and Recoverable Interr. */
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start
-_start:
- lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
- mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
-
- /* Initialize machine status; enable machine check interrupt */
- /*----------------------------------------------------------------------*/
- li r3, MSR_KERNEL /* Set ME, RI flags */
- mtmsr r3
- mtspr SRR1, r3 /* Make SRR1 match MSR */
-
- mfspr r3, ICR /* clear Interrupt Cause Register */
-
- /* Initialize debug port registers */
- /*----------------------------------------------------------------------*/
- xor r0, r0, r0 /* Clear R0 */
- mtspr LCTRL1, r0 /* Initialize debug port regs */
- mtspr LCTRL2, r0
- mtspr COUNTA, r0
- mtspr COUNTB, r0
-
- /* Reset the caches */
- /*----------------------------------------------------------------------*/
-
- mfspr r3, IC_CST /* Clear error bits */
- mfspr r3, DC_CST
-
- lis r3, IDC_UNALL@h /* Unlock all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_INVALL@h /* Invalidate all */
- mtspr IC_CST, r3
- mtspr DC_CST, r3
-
- lis r3, IDC_DISABLE@h /* Disable data cache */
- mtspr DC_CST, r3
-
-#if !defined(CONFIG_SYS_DELAYED_ICACHE)
- /* On IP860 and PCU E,
- * we cannot enable IC yet
- */
- lis r3, IDC_ENABLE@h /* Enable instruction cache */
-#endif
- mtspr IC_CST, r3
-
- /* invalidate all tlb's */
- /*----------------------------------------------------------------------*/
-
- tlbia
- isync
-
- /*
- * Calculate absolute address in FLASH and jump there
- *----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_MONITOR_BASE@h
- ori r3, r3, CONFIG_SYS_MONITOR_BASE@l
- addi r3, r3, in_flash - _start + EXC_OFF_SYS_RESET
- mtlr r3
- blr
-
-in_flash:
-
- /* initialize some SPRs that are hard to access from C */
- /*----------------------------------------------------------------------*/
-
- lis r3, CONFIG_SYS_IMMR@h /* pass IMMR as arg1 to C routine */
- ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in internal DPRAM */
- /* Note: R0 is still 0 here */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- /*
- * Disable serialized ifetch and show cycles
- * (i.e. set processor to normal mode).
- * This is also a silicon bug workaround, see errata
- */
-
- li r2, 0x0007
- mtspr ICTRL, r2
-
- /* Set up debug mode entry */
-
- lis r2, CONFIG_SYS_DER@h
- ori r2, r2, CONFIG_SYS_DER@l
- mtspr DER, r2
-
- /* let the C-code set up the rest */
- /* */
- /* Be careful to keep code relocatable ! */
- /*----------------------------------------------------------------------*/
-
- GET_GOT /* initialize GOT access */
-
- /* r3: IMMR */
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- mr r3, r21
- /* r3: BOOTFLAG */
- bl board_init_f /* run 1st part of board init code (from Flash) */
-
-
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-
-/* Data Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. "Never" generated on the 860. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
- /* No FPU on MPC8xx. This exception is not supposed to happen.
- */
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
-
- /* I guess we could implement decrementer, and may have
- * to someday for timekeeping.
- */
- STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
- STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
- STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
- STD_EXCEPTION(0xd00, SingleStep, UnknownException)
-
- STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
- STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
-
- /* On the MPC8xx, this is a software emulation interrupt. It occurs
- * for all unimplemented and illegal instructions.
- */
- STD_EXCEPTION(0x1000, SoftEmu, SoftEmuException)
-
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
- STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException)
- STD_EXCEPTION(0x1400, DataTLBError, UnknownException)
-
- STD_EXCEPTION(0x1500, Reserved5, UnknownException)
- STD_EXCEPTION(0x1600, Reserved6, UnknownException)
- STD_EXCEPTION(0x1700, Reserved7, UnknownException)
- STD_EXCEPTION(0x1800, Reserved8, UnknownException)
- STD_EXCEPTION(0x1900, Reserved9, UnknownException)
- STD_EXCEPTION(0x1a00, ReservedA, UnknownException)
- STD_EXCEPTION(0x1b00, ReservedB, UnknownException)
-
- STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException)
- STD_EXCEPTION(0x1d00, InstructionBreakpoint, DebugException)
- STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException)
- STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException)
-
-
- .globl _end_of_vectors
-_end_of_vectors:
-
-
- . = 0x2000
-
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-/* Cache functions.
-*/
- .globl icache_enable
-icache_enable:
- SYNC
- lis r3, IDC_INVALL@h
- mtspr IC_CST, r3
- lis r3, IDC_ENABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_disable
-icache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr IC_CST, r3
- blr
-
- .globl icache_status
-icache_status:
- mfspr r3, IC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
-#if 0
- SYNC
-#endif
-#if 1
- lis r3, 0x0400 /* Set cache mode with MMU off */
- mtspr MD_CTR, r3
-#endif
-
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
-#if 0
- lis r3, DC_SFWT@h
- mtspr DC_CST, r3
-#endif
- lis r3, IDC_ENABLE@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- SYNC
- lis r3, IDC_DISABLE@h
- mtspr DC_CST, r3
- lis r3, IDC_INVALL@h
- mtspr DC_CST, r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfspr r3, DC_CST
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dc_read
-dc_read:
- mtspr DC_ADR, r3
- mfspr r3, DC_DAT
- blr
-
-/*
- * unsigned int get_immr (unsigned int mask)
- *
- * return (mask ? (IMMR & mask) : IMMR);
- */
- .globl get_immr
-get_immr:
- mr r4,r3 /* save mask */
- mfspr r3, IMMR /* IMMR */
- cmpwi 0,r4,0 /* mask != 0 ? */
- beq 4f
- and r3,r3,r4 /* IMMR & mask */
-4:
- blr
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-
- .globl wr_ic_cst
-wr_ic_cst:
- mtspr IC_CST, r3
- blr
-
- .globl rd_ic_cst
-rd_ic_cst:
- mfspr r3, IC_CST
- blr
-
- .globl wr_ic_adr
-wr_ic_adr:
- mtspr IC_ADR, r3
- blr
-
-
- .globl wr_dc_cst
-wr_dc_cst:
- mtspr DC_CST, r3
- blr
-
- .globl rd_dc_cst
-rd_dc_cst:
- mfspr r3, DC_CST
- blr
-
- .globl wr_dc_adr
-wr_dc_adr:
- mtspr DC_ADR, r3
- blr
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = dest
- * r4 = src
- * r5 = length in bytes
- * r6 = cachelinesize
- */
- .globl relocate_code
-relocate_code:
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Global Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
- mtlr r0
- blr
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 6f
-
- li r0, 0
-5:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 5b
-6:
-
- mr r3, r9 /* Global Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
- li r8, Alignment - _start + EXC_OFF_SYS_RESET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
- bl trap_reloc
-
- li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
- li r8, SystemCall - _start + EXC_OFF_SYS_RESET
-3:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 3b
-
- li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
- li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
-4:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 4b
-
- mtlr r4 /* restore link register */
- blr
diff --git a/cpu/mpc8xx/traps.c b/cpu/mpc8xx/traps.c
deleted file mode 100644
index 6efe8e0..0000000
--- a/cpu/mpc8xx/traps.c
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
-*/
-#define END_OF_MEM 0x02000000
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0)
- {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7)
- {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup;
-
- /* Probing PCI using config cycles cause this exception
- * when a device is not present. Catch it and return to
- * the PCI exception handler.
- */
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine check in kernel mode.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ",regs);
- switch( regs->msr & 0x000F0000) {
- case (0x80000000>>12):
- printf("Machine check signal - probably due to mm fault\n"
- "with mmu off\n");
- break;
- case (0x80000000>>13):
- printf("Transfer error ack signal\n");
- break;
- case (0x80000000>>14):
- printf("Data parity signal\n");
- break;
- case (0x80000000>>15):
- printf("Address parity signal\n");
- break;
- default:
- printf("Unknown values in msr\n");
- }
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-SoftEmuException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Software Emulation Exception");
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/mpc8xx/upatch.c b/cpu/mpc8xx/upatch.c
deleted file mode 100644
index a8cb735..0000000
--- a/cpu/mpc8xx/upatch.c
+++ /dev/null
@@ -1,194 +0,0 @@
-#include <common.h>
-#include <commproc.h>
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCH) || \
- defined(CONFIG_SYS_SMC_UCODE_PATCH)
-
-static void UcodeCopy (volatile cpm8xx_t *cpm);
-
-void cpm_load_patch (volatile immap_t *immr)
-{
- immr->im_cpm.cp_rccr &= ~0x0003; /* Disable microcode program area */
-
- UcodeCopy ((cpm8xx_t *)&immr->im_cpm); /* Copy ucode patch to DPRAM */
-#ifdef CONFIG_SYS_SPI_UCODE_PATCH
- {
- volatile spi_t *spi = (spi_t *) & immr->im_cpm.cp_dparam[PROFF_SPI];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SPI parameters (not I2C). */
- immr->im_cpm.cp_cpmcr1 = 0x802a; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8028; /* Write Trap register 2 value */
- spi->spi_rpbase = CONFIG_SYS_SPI_DPMEM_OFFSET; /* Where to relocte SPI params */
- }
-#endif
-
-#ifdef CONFIG_SYS_I2C_UCODE_PATCH
- {
- volatile iic_t *iip = (iic_t *) & immr->im_cpm.cp_dparam[PROFF_IIC];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the I2C parameters (not SPI). */
- immr->im_cpm.cp_cpmcr3 = 0x802e; /* Write Trap register 3 value */
- immr->im_cpm.cp_cpmcr4 = 0x802c; /* Write Trap register 4 value */
- iip->iic_rpbase = CONFIG_SYS_I2C_DPMEM_OFFSET; /* Where to relocte I2C params */
- }
-#endif
-
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- {
- volatile smc_uart_t *up = (smc_uart_t *) & immr->im_cpm.cp_dparam[PROFF_SMC1];
- /* Activate the microcode per the instructions in the microcode manual */
- /* NOTE: We're only relocating the SMC parameters. */
- immr->im_cpm.cp_cpmcr1 = 0x8080; /* Write Trap register 1 value */
- immr->im_cpm.cp_cpmcr2 = 0x8088; /* Write Trap register 2 value */
- up->smc_rpbase = CONFIG_SYS_SMC_DPMEM_OFFSET; /* Where to relocte SMC params */
- }
-#endif
-
- /*
- * Enable DPRAM microcode to execute from the first 512 bytes
- * and a 256 byte extension of DPRAM.
- */
-#ifdef CONFIG_SYS_SMC_UCODE_PATCH
- immr->im_cpm.cp_rccr |= 0x0002;
-#else
- immr->im_cpm.cp_rccr |= 0x0001;
-#endif
-}
-
-#if defined(CONFIG_SYS_I2C_UCODE_PATCH) || defined(CONFIG_SYS_SPI_UCODE_PATCh)
-static ulong patch_2000[] = {
- 0x7FFFEFD9, 0x3FFD0000, 0x7FFB49F7, 0x7FF90000,
- 0x5FEFADF7, 0x5F88ADF7, 0x5FEFAFF7, 0x5F88AFF7,
- 0x3A9CFBC8, 0x77CAE1BB, 0xF4DE7FAD, 0xABAE9330,
- 0x4E08FDCF, 0x6E0FAFF8, 0x7CCF76CF, 0xFDAFF9CF,
- 0xABF88DC8, 0xAB5879F7, 0xB0927383, 0xDFD079F7,
- 0xB090E6BB, 0xE5BBE74F, 0xB3FA6F0F, 0x6FFB76CE,
- 0xEE0CF9CF, 0x2BFBEFEF, 0xCFEEF9CF, 0x76CEAD23,
- 0x90B3DF99, 0x7FDDD0C1, 0x4BF847FD, 0x7CCF76CE,
- 0xCFEF77CA, 0x7EAF7FAD, 0x7DFDF0B7, 0xEF7A7FCA,
- 0x77CAFBC8, 0x6079E722, 0xFBC85FFF, 0xDFFF5FB3,
- 0xFFFBFBC8, 0xF3C894A5, 0xE7C9EDF9, 0x7F9A7FAD,
- 0x5F36AFE8, 0x5F5BFFDF, 0xDF95CB9E, 0xAF7D5FC3,
- 0xAFED8C1B, 0x5FC3AFDD, 0x5FC5DF99, 0x7EFDB0B3,
- 0x5FB3FFFE, 0xABAE5FB3, 0xFFFE5FD0, 0x600BE6BB,
- 0x600B5FD0, 0xDFC827FB, 0xEFDF5FCA, 0xCFDE3A9C,
- 0xE7C9EDF9, 0xF3C87F9E, 0x54CA7FED, 0x2D3A3637,
- 0x756F7E9A, 0xF1CE37EF, 0x2E677FEE, 0x10EBADF8,
- 0xEFDECFEA, 0xE52F7D9F, 0xE12BF1CE, 0x5F647E9A,
- 0x4DF8CFEA, 0x5F717D9B, 0xEFEECFEA, 0x5F73E522,
- 0xEFDE5F73, 0xCFDA0B61, 0x7385DF61, 0xE7C9EDF9,
- 0x7E9A30D5, 0x1458BFFF, 0xF3C85FFF, 0xDFFFA7F8,
- 0x5F5BBFFE, 0x7F7D10D0, 0x144D5F33, 0xBFFFAF78,
- 0x5F5BBFFD, 0xA7F85F33, 0xBFFE77FD, 0x30BD4E08,
- 0xFDCFE5FF, 0x6E0FAFF8, 0x7EEF7E9F, 0xFDEFF1CF,
- 0x5F17ABF8, 0x0D5B5F5B, 0xFFEF79F7, 0x309EAFDD,
- 0x5F3147F8, 0x5F31AFED, 0x7FDD50AF, 0x497847FD,
- 0x7F9E7FED, 0x7DFD70A9, 0xEF7E7ECE, 0x6BA07F9E,
- 0x2D227EFD, 0x30DB5F5B, 0xFFFD5F5B, 0xFFEF5F5B,
- 0xFFDF0C9C, 0xAFED0A9A, 0xAFDD0C37, 0x5F37AFBD,
- 0x7FBDB081, 0x5F8147F8,
-};
-
-static ulong patch_2F00[] = {
- 0x3E303430, 0x34343737, 0xABBF9B99, 0x4B4FBDBD,
- 0x59949334, 0x9FFF37FB, 0x9B177DD9, 0x936956BB,
- 0xFBDD697B, 0xDD2FD113, 0x1DB9F7BB, 0x36313963,
- 0x79373369, 0x3193137F, 0x7331737A, 0xF7BB9B99,
- 0x9BB19795, 0x77FDFD3D, 0x573B773F, 0x737933F7,
- 0xB991D115, 0x31699315, 0x31531694, 0xBF4FBDBD,
- 0x35931497, 0x35376956, 0xBD697B9D, 0x96931313,
- 0x19797937, 0x69350000,
-};
-#else
-
-static ulong patch_2000[] = {
- 0x3fff0000, 0x3ffd0000, 0x3ffb0000, 0x3ff90000,
- 0x5fefeff8, 0x5f91eff8, 0x3ff30000, 0x3ff10000,
- 0x3a11e710, 0xedf0ccb9, 0xf318ed66, 0x7f0e5fe2,
- 0x7fedbb38, 0x3afe7468, 0x7fedf4d8, 0x8ffbb92d,
- 0xb83b77fd, 0xb0bb5eb9, 0xdfda7fed, 0x90bde74d,
- 0x6f0dcbd3, 0xe7decfed, 0xcb50cfed, 0xcfeddf6d,
- 0x914d4f74, 0x5eaedfcb, 0x9ee0e7df, 0xefbb6ffb,
- 0xe7ef7f0e, 0x9ee57fed, 0xebb7effa, 0xeb30affb,
- 0x7fea90b3, 0x7e0cf09f, 0xbffff318, 0x5fffdfff,
- 0xac35efea, 0x7fce1fc1, 0xe2ff5fbd, 0xaffbe2ff,
- 0x5fbfaffb, 0xf9a87d0f, 0xaef8770f, 0x7d0fb0a2,
- 0xeffbbfff, 0xcfef5fba, 0x7d0fbfff, 0x5fba4cf8,
- 0x7fddd09b, 0x49f847fd, 0x7efdf097, 0x7fedfffd,
- 0x7dfdf093, 0xef7e7e1e, 0x5fba7f0e, 0x3a11e710,
- 0xedf0cc87, 0xfb18ad0a, 0x1f85bbb8, 0x74283b7e,
- 0x7375e4bb, 0x2ab64fb8, 0x5c7de4bb, 0x32fdffbf,
- 0x5f0843f8, 0x7ce3e1bb, 0xe74f7ded, 0x6f0f4fe8,
- 0xc7ba32be, 0x73f2efeb, 0x600b4f78, 0xe5bb760b,
- 0x5388aef8, 0x4ef80b6a, 0xcfef9ee5, 0xabf8751f,
- 0xefef5b88, 0x741f4fe8, 0x751e760d, 0x7fdb70dd,
- 0x741cafce, 0xefcc7fce, 0x751e7088, 0x741ce7bb,
- 0x334ecfed, 0xafdbefeb, 0xe5bb760b, 0x53ceaef8,
- 0xafe8e7eb, 0x4bf8771e, 0x7e007fed, 0x4fcbe2cc,
- 0x7fbc3085, 0x7b0f7a0f, 0x34b177fd, 0xb0e75e93,
- 0xdf313e3b, 0xaf78741f, 0x741f30cc, 0xcfef5f08,
- 0x741f3e88, 0xafb8771e, 0x5f437fed, 0x0bafe2cc,
- 0x741ccfec, 0xe5ca53a9, 0x6fcb4f74, 0x5e89df27,
- 0x2a923d14, 0x4b8fdf0c, 0x751f741c, 0x6c1eeffa,
- 0xefea7fce, 0x6ffc309a, 0xefec3fca, 0x308fdf0a,
- 0xadf85e7a, 0xaf7daefd, 0x5e7adf0a, 0x5e7aafdd,
- 0x761f1088, 0x1e7c7efd, 0x3089fffe, 0x4908fb18,
- 0x5fffdfff, 0xafbbf0f7, 0x4ef85f43, 0xadf81489,
- 0x7a0f7089, 0xcfef5089, 0x7a0fdf0c, 0x5e7cafed,
- 0xbc6e780f, 0xefef780f, 0xefef790f, 0xa7f85eeb,
- 0xffef790f, 0xefef790f, 0x1489df0a, 0x5e7aadfd,
- 0x5f09fffb, 0xe79aded9, 0xeff96079, 0x607ae79a,
- 0xded8eff9, 0x60795edb, 0x607acfef, 0xefefefdf,
- 0xefbfef7f, 0xeeffedff, 0xebffe7ff, 0xafefafdf,
- 0xafbfaf7f, 0xaeffadff, 0xabffa7ff, 0x6fef6fdf,
- 0x6fbf6f7f, 0x6eff6dff, 0x6bff67ff, 0x2fef2fdf,
- 0x2fbf2f7f, 0x2eff2dff, 0x2bff27ff, 0x4e08fd1f,
- 0xe5ff6e0f, 0xaff87eef, 0x7e0ffdef, 0xf11f6079,
- 0xabf8f51e, 0x7e0af11c, 0x37cfae16, 0x7fec909a,
- 0xadf8efdc, 0xcfeae52f, 0x7d0fe12b, 0xf11c6079,
- 0x7e0a4df8, 0xcfea5ea0, 0x7d0befec, 0xcfea5ea2,
- 0xe522efdc, 0x5ea2cfda, 0x4e08fd1f, 0x6e0faff8,
- 0x7c1f761f, 0xfdeff91f, 0x6079abf8, 0x761cee00,
- 0xf91f2bfb, 0xefefcfec, 0xf91f6079, 0x761c27fb,
- 0xefdf5e83, 0xcfdc7fdd, 0x50f84bf8, 0x47fd7c1f,
- 0x761ccfcf, 0x7eef7fed, 0x7dfd70ef, 0xef7e7f1e,
- 0x771efb18, 0x6079e722, 0xe6bbe5bb, 0x2e66e5bb,
- 0x600b2ee1, 0xe2bbe2bb, 0xe2bbe2bb, 0x2f5ee2bb,
- 0xe2bb2ff9, 0x6079e2bb,
-};
-
-static ulong patch_2F00[] = {
- 0x30303030, 0x3e3e3030, 0xaf79b9b3, 0xbaa3b979,
- 0x9693369f, 0x79f79777, 0x97333fff, 0xfb3b9e9f,
- 0x79b91d11, 0x9e13f3ff, 0x3f9b6bd9, 0xe173d136,
- 0x695669d1, 0x697b3daf, 0x79b93a3a, 0x3f979f91,
- 0x379ff976, 0xf99777fd, 0x9779737d, 0xe9d6bbf9,
- 0xbfffd9df, 0x97f7fd97, 0x6f7b9bff, 0xf9bd9683,
- 0x397db973, 0xd97b3b9f, 0xd7f9f733, 0x9993bb9e,
- 0xe1f9ef93, 0x73773337, 0xb936917d, 0x11f87379,
- 0xb979d336, 0x8b7ded73, 0x1b7d9337, 0x31f3f22f,
- 0x3f2327ee, 0xeeeeeeee, 0xeeeeeeee, 0xeeeeeeee,
- 0xeeeeee4b, 0xf4fbdbd2, 0x58bb1878, 0x577fdfd2,
- 0xd573b773, 0xf7374b4f, 0xbdbd25b8, 0xb177d2d1,
- 0x7376856b, 0xbfdd687b, 0xdd2fff8f, 0x78ffff8f,
- 0xf22f0000,
-};
-#endif
-
-static void UcodeCopy (volatile cpm8xx_t *cpm)
-{
- vu_long *p;
- int i;
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0000]);
- for (i=0; i < sizeof(patch_2000)/4; ++i) {
- p[i] = patch_2000[i];
- }
-
- p = (vu_long *)&(cpm->cp_dpmem[0x0F00]);
- for (i=0; i < sizeof(patch_2F00)/4; ++i) {
- p[i] = patch_2F00[i];
- }
-}
-
-#endif /* CONFIG_SYS_I2C_UCODE_PATCH, CONFIG_SYS_SPI_UCODE_PATCH */
diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c
deleted file mode 100644
index c79c499..0000000
--- a/cpu/mpc8xx/video.c
+++ /dev/null
@@ -1,1331 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- * (C) Copyright 2002
- * Wolfgang Denk, wd@denx.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* #define DEBUG */
-
-/************************************************************************/
-/* ** HEADER FILES */
-/************************************************************************/
-
-#include <stdarg.h>
-#include <common.h>
-#include <config.h>
-#include <version.h>
-#include <timestamp.h>
-#include <i2c.h>
-#include <linux/types.h>
-#include <stdio_dev.h>
-
-#ifdef CONFIG_VIDEO
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/************************************************************************/
-/* ** DEBUG SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_DEBUG_COLORBARS /* Force colorbars output */
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE SETTINGS */
-/************************************************************************/
-
-#if 0
-#define VIDEO_MODE_EXTENDED /* Allow screen size bigger than visible area */
-#define VIDEO_MODE_NTSC
-#endif
-
-#define VIDEO_MODE_PAL
-
-#if 0
-#define VIDEO_BLINK /* This enables cursor blinking (under construction) */
-#endif
-
-#define VIDEO_INFO /* Show U-Boot information */
-#define VIDEO_INFO_X VIDEO_LOGO_WIDTH+8
-#define VIDEO_INFO_Y 16
-
-/************************************************************************/
-/* ** VIDEO ENCODER CONSTANTS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7176
-
-#include <video_ad7176.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7176_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7177
-
-#include <video_ad7177.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7177_ADDR
-#endif
-
-#ifdef CONFIG_VIDEO_ENCODER_AD7179
-
-#include <video_ad7179.h> /* Sets encoder data, mode, and visible and active area */
-
-#define VIDEO_I2C 1
-#define VIDEO_I2C_ADDR CONFIG_VIDEO_ENCODER_AD7179_ADDR
-#endif
-
-/************************************************************************/
-/* ** VIDEO MODE CONSTANTS */
-/************************************************************************/
-
-#ifdef VIDEO_MODE_EXTENDED
-#define VIDEO_COLS VIDEO_ACTIVE_COLS
-#define VIDEO_ROWS VIDEO_ACTIVE_ROWS
-#else
-#define VIDEO_COLS VIDEO_VISIBLE_COLS
-#define VIDEO_ROWS VIDEO_VISIBLE_ROWS
-#endif
-
-#define VIDEO_PIXEL_SIZE (VIDEO_MODE_BPP/8)
-#define VIDEO_SIZE (VIDEO_ROWS*VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Total size of buffer */
-#define VIDEO_PIX_BLOCKS (VIDEO_SIZE >> 2) /* Number of ints */
-#define VIDEO_LINE_LEN (VIDEO_COLS*VIDEO_PIXEL_SIZE) /* Number of bytes per line */
-#define VIDEO_BURST_LEN (VIDEO_COLS/8)
-
-#ifdef VIDEO_MODE_YUYV
-#define VIDEO_BG_COL 0x80D880D8 /* Background color in YUYV format */
-#else
-#define VIDEO_BG_COL 0xF8F8F8F8 /* Background color in RGB format */
-#endif
-
-/************************************************************************/
-/* ** FONT AND LOGO DATA */
-/************************************************************************/
-
-#include <video_font.h> /* Get font data, width and height */
-
-#ifdef CONFIG_VIDEO_LOGO
-#include <video_logo.h> /* Get logo data, width and height */
-
-#define VIDEO_LOGO_WIDTH DEF_U_BOOT_LOGO_WIDTH
-#define VIDEO_LOGO_HEIGHT DEF_U_BOOT_LOGO_HEIGHT
-#define VIDEO_LOGO_ADDR &u_boot_logo
-#endif
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER CONSTANTS */
-/************************************************************************/
-
-/* VCCR - VIDEO CONTROLLER CONFIGURATION REGISTER */
-
-#define VIDEO_VCCR_VON 0 /* Video controller ON */
-#define VIDEO_VCCR_CSRC 1 /* Clock source */
-#define VIDEO_VCCR_PDF 13 /* Pixel display format */
-#define VIDEO_VCCR_IEN 11 /* Interrupt enable */
-
-/* VSR - VIDEO STATUS REGISTER */
-
-#define VIDEO_VSR_CAS 6 /* Active set */
-#define VIDEO_VSR_EOF 0 /* End of frame */
-
-/* VCMR - VIDEO COMMAND REGISTER */
-
-#define VIDEO_VCMR_BD 0 /* Blank display */
-#define VIDEO_VCMR_ASEL 1 /* Active set selection */
-
-/* VBCB - VIDEO BACKGROUND COLOR BUFFER REGISTER */
-
-#define VIDEO_BCSR4_RESET_BIT 21 /* BCSR4 - Extern video encoder reset */
-#define VIDEO_BCSR4_EXTCLK_BIT 22 /* BCSR4 - Extern clock enable */
-#define VIDEO_BCSR4_VIDLED_BIT 23 /* BCSR4 - Video led disable */
-
-/************************************************************************/
-/* ** CONSOLE CONSTANTS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-#define CONSOLE_ROWS ((VIDEO_ROWS - VIDEO_LOGO_HEIGHT) / VIDEO_FONT_HEIGHT)
-#define VIDEO_LOGO_SKIP (VIDEO_COLS - VIDEO_LOGO_WIDTH)
-#else
-#define CONSOLE_ROWS (VIDEO_ROWS / VIDEO_FONT_HEIGHT)
-#endif
-
-#define CONSOLE_COLS (VIDEO_COLS / VIDEO_FONT_WIDTH)
-#define CONSOLE_ROW_SIZE (VIDEO_FONT_HEIGHT * VIDEO_LINE_LEN)
-#define CONSOLE_ROW_FIRST (video_console_address)
-#define CONSOLE_ROW_SECOND (video_console_address + CONSOLE_ROW_SIZE)
-#define CONSOLE_ROW_LAST (video_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-#define CONSOLE_SIZE (CONSOLE_ROW_SIZE * CONSOLE_ROWS)
-#define CONSOLE_SCROLL_SIZE (CONSOLE_SIZE - CONSOLE_ROW_SIZE)
-
-/*
- * Simple color definitions
- */
-#define CONSOLE_COLOR_BLACK 0
-#define CONSOLE_COLOR_RED 1
-#define CONSOLE_COLOR_GREEN 2
-#define CONSOLE_COLOR_YELLOW 3
-#define CONSOLE_COLOR_BLUE 4
-#define CONSOLE_COLOR_MAGENTA 5
-#define CONSOLE_COLOR_CYAN 6
-#define CONSOLE_COLOR_GREY 13
-#define CONSOLE_COLOR_GREY2 14
-#define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
-
-/************************************************************************/
-/* ** BITOPS MACROS */
-/************************************************************************/
-
-#define HISHORT(i) ((i >> 16)&0xffff)
-#define LOSHORT(i) (i & 0xffff)
-#define HICHAR(s) ((i >> 8)&0xff)
-#define LOCHAR(s) (i & 0xff)
-#define HI(c) ((c >> 4)&0xf)
-#define LO(c) (c & 0xf)
-#define SWAPINT(i) (HISHORT(i) | (LOSHORT(i) << 16))
-#define SWAPSHORT(s) (HICHAR(s) | (LOCHAR(s) << 8))
-#define SWAPCHAR(c) (HI(c) | (LO(c) << 4))
-#define BITMASK(b) (1 << (b))
-#define GETBIT(v,b) (((v) & BITMASK(b)) > 0)
-#define SETBIT(v,b,d) (v = (((d)>0) ? (v) | BITMASK(b): (v) & ~BITMASK(b)))
-
-/************************************************************************/
-/* ** STRUCTURES */
-/************************************************************************/
-
-typedef struct {
- unsigned char V, Y1, U, Y2;
-} tYUYV;
-
-/* This structure is based on the Video Ram in the MPC823. */
-typedef struct VRAM {
- unsigned hx:2, /* Horizontal sync */
- vx:2, /* Vertical sync */
- fx:2, /* Frame */
- bx:2, /* Blank */
- res1:6, /* Reserved */
- vds:2, /* Video Data Select */
- inter:1, /* Interrupt */
- res2:2, /* Reserved */
- lcyc:11, /* Loop/video cycles */
- lp:1, /* Loop start/end */
- lst:1; /* Last entry */
-} VRAM;
-
-/************************************************************************/
-/* ** VARIABLES */
-/************************************************************************/
-
-static int
- video_panning_range_x = 0, /* Video mode invisible pixels x range */
- video_panning_range_y = 0, /* Video mode invisible pixels y range */
- video_panning_value_x = 0, /* Video mode x panning value (absolute) */
- video_panning_value_y = 0, /* Video mode y panning value (absolute) */
- video_panning_factor_x = 0, /* Video mode x panning value (-127 +127) */
- video_panning_factor_y = 0, /* Video mode y panning value (-127 +127) */
- console_col = 0, /* Cursor col */
- console_row = 0, /* Cursor row */
- video_palette[16]; /* Our palette */
-
-static const int video_font_draw_table[] =
- { 0x00000000, 0x0000ffff, 0xffff0000, 0xffffffff };
-
-static char
- video_color_fg = 0, /* Current fg color index (0-15) */
- video_color_bg = 0, /* Current bg color index (0-15) */
- video_enable = 0; /* Video has been initialized? */
-
-static void
- *video_fb_address, /* Frame buffer address */
- *video_console_address; /* Console frame buffer start address */
-
-/************************************************************************/
-/* ** MEMORY FUNCTIONS (32bit) */
-/************************************************************************/
-
-static void memsetl (int *p, int c, int v)
-{
- while (c--)
- *(p++) = v;
-}
-
-static void memcpyl (int *d, int *s, int c)
-{
- while (c--)
- *(d++) = *(s++);
-}
-
-/************************************************************************/
-/* ** VIDEO DRAWING AND COLOR FUNCTIONS */
-/************************************************************************/
-
-static int video_maprgb (int r, int g, int b)
-{
-#ifdef VIDEO_MODE_YUYV
- unsigned int pR, pG, pB;
- tYUYV YUYV;
- unsigned int *ret = (unsigned int *) &YUYV;
-
- /* Transform (0-255) components to (0-100) */
-
- pR = r * 100 / 255;
- pG = g * 100 / 255;
- pB = b * 100 / 255;
-
- /* Calculate YUV values (0-255) from RGB beetween 0-100 */
-
- YUYV.Y1 = YUYV.Y2 = 209 * (pR + pG + pB) / 300 + 16;
- YUYV.U = pR - (pG * 3 / 4) - (pB / 4) + 128;
- YUYV.V = pB - (pR / 4) - (pG * 3 / 4) + 128;
- return *ret;
-#endif
-#ifdef VIDEO_MODE_RGB
- return ((r >> 3) << 11) | ((g > 2) << 6) | (b >> 3);
-#endif
-}
-
-static void video_setpalette (int color, int r, int g, int b)
-{
- color &= 0xf;
-
- video_palette[color] = video_maprgb (r, g, b);
-
- /* Swap values if our panning offset is odd */
- if (video_panning_value_x & 1)
- video_palette[color] = SWAPINT (video_palette[color]);
-}
-
-static void video_fill (int color)
-{
- memsetl (video_fb_address, VIDEO_PIX_BLOCKS, color);
-}
-
-static void video_setfgcolor (int i)
-{
- video_color_fg = i & 0xf;
-}
-
-static void video_setbgcolor (int i)
-{
- video_color_bg = i & 0xf;
-}
-
-static int video_pickcolor (int i)
-{
- return video_palette[i & 0xf];
-}
-
-/* Absolute console plotting functions */
-
-#ifdef VIDEO_BLINK
-static void video_revchar (int xx, int yy)
-{
- int rows;
- u8 *dest;
-
- dest = video_fb_address + yy * VIDEO_LINE_LEN + xx * 2;
-
- for (rows = VIDEO_FONT_HEIGHT; rows--; dest += VIDEO_LINE_LEN) {
- switch (VIDEO_FONT_WIDTH) {
- case 16:
- ((u32 *) dest)[6] ^= 0xffffffff;
- ((u32 *) dest)[7] ^= 0xffffffff;
- /* FALL THROUGH */
- case 12:
- ((u32 *) dest)[4] ^= 0xffffffff;
- ((u32 *) dest)[5] ^= 0xffffffff;
- /* FALL THROUGH */
- case 8:
- ((u32 *) dest)[2] ^= 0xffffffff;
- ((u32 *) dest)[3] ^= 0xffffffff;
- /* FALL THROUGH */
- case 4:
- ((u32 *) dest)[0] ^= 0xffffffff;
- ((u32 *) dest)[1] ^= 0xffffffff;
- }
- }
-}
-#endif
-
-static void video_drawchars (int xx, int yy, unsigned char *s, int count)
-{
- u8 *cdat, *dest, *dest0;
- int rows, offset, c;
- u32 eorx, fgx, bgx;
-
- offset = yy * VIDEO_LINE_LEN + xx * 2;
- dest0 = video_fb_address + offset;
-
- fgx = video_pickcolor (video_color_fg);
- bgx = video_pickcolor (video_color_bg);
-
- if (xx & 1) {
- fgx = SWAPINT (fgx);
- bgx = SWAPINT (bgx);
- }
-
- eorx = fgx ^ bgx;
-
- switch (VIDEO_FONT_WIDTH) {
- case 4:
- case 8:
- while (count--) {
- c = *s;
- cdat = video_fontdata + c * VIDEO_FONT_HEIGHT;
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0;
- rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 8) {
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- dest0 += VIDEO_FONT_WIDTH * 2;
- s++;
- }
- break;
- case 12:
- case 16:
- while (count--) {
- cdat = video_fontdata + (*s) * (VIDEO_FONT_HEIGHT << 1);
- for (rows = VIDEO_FONT_HEIGHT, dest = dest0; rows--;
- dest += VIDEO_LINE_LEN) {
- u8 bits = *cdat++;
-
- ((u32 *) dest)[0] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[1] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[2] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[3] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- bits = *cdat++;
- ((u32 *) dest)[4] =
- (video_font_draw_table[bits >> 6] & eorx) ^ bgx;
- ((u32 *) dest)[5] =
- (video_font_draw_table[bits >> 4 & 3] & eorx) ^ bgx;
- if (VIDEO_FONT_WIDTH == 16) {
- ((u32 *) dest)[6] =
- (video_font_draw_table[bits >> 2 & 3] & eorx) ^ bgx;
- ((u32 *) dest)[7] =
- (video_font_draw_table[bits & 3] & eorx) ^ bgx;
- }
- }
- s++;
- dest0 += VIDEO_FONT_WIDTH * 2;
- }
- break;
- }
-}
-
-static inline void video_drawstring (int xx, int yy, char *s)
-{
- video_drawchars (xx, yy, (unsigned char *)s, strlen (s));
-}
-
-/* Relative to console plotting functions */
-
-static void video_putchars (int xx, int yy, unsigned char *s, int count)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, s, count);
-#else
- video_drawchars (xx, yy, s, count);
-#endif
-}
-
-static void video_putchar (int xx, int yy, unsigned char c)
-{
-#ifdef CONFIG_VIDEO_LOGO
- video_drawchars (xx, yy + VIDEO_LOGO_HEIGHT, &c, 1);
-#else
- video_drawchars (xx, yy, &c, 1);
-#endif
-}
-
-static inline void video_putstring (int xx, int yy, unsigned char *s)
-{
- video_putchars (xx, yy, (unsigned char *)s, strlen ((char *)s));
-}
-
-/************************************************************************/
-/* ** VIDEO CONTROLLER LOW-LEVEL FUNCTIONS */
-/************************************************************************/
-
-#if !defined(CONFIG_RRVISION)
-static void video_mode_dupefield (VRAM * source, VRAM * dest, int entries)
-{
- int i;
-
- for (i = 0; i < entries; i++) {
- dest[i] = source[i]; /* Copy the entire record */
- dest[i].fx = (!dest[i].fx) * 3; /* Negate field bit */
- }
-
- dest[0].lcyc++; /* Add a cycle to the first entry */
- dest[entries - 1].lst = 1; /* Set end of ram entries */
-}
-#endif
-
-static void inline video_mode_addentry (VRAM * vr,
- int Hx, int Vx, int Fx, int Bx,
- int VDS, int INT, int LCYC, int LP, int LST)
-{
- vr->hx = Hx;
- vr->vx = Vx;
- vr->fx = Fx;
- vr->bx = Bx;
- vr->vds = VDS;
- vr->inter = INT;
- vr->lcyc = LCYC;
- vr->lp = LP;
- vr->lst = LST;
-}
-
-#define ADDENTRY(a,b,c,d,e,f,g,h,i) video_mode_addentry(&vr[entry++],a,b,c,d,e,f,g,h,i)
-
-static int video_mode_generate (void)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- VRAM *vr = (VRAM *) (((void *) immap) + 0xb00); /* Pointer to the VRAM table */
- int DX, X1, X2, DY, Y1, Y2, entry = 0, fifo;
-
- /* CHECKING PARAMETERS */
-
- if (video_panning_factor_y < -128)
- video_panning_factor_y = -128;
-
- if (video_panning_factor_y > 128)
- video_panning_factor_y = 128;
-
- if (video_panning_factor_x < -128)
- video_panning_factor_x = -128;
-
- if (video_panning_factor_x > 128)
- video_panning_factor_x = 128;
-
- /* Setting panning */
-
- DX = video_panning_range_x = (VIDEO_ACTIVE_COLS - VIDEO_COLS) * 2;
- DY = video_panning_range_y = (VIDEO_ACTIVE_ROWS - VIDEO_ROWS) / 2;
-
- video_panning_value_x = (video_panning_factor_x + 128) * DX / 256;
- video_panning_value_y = (video_panning_factor_y + 128) * DY / 256;
-
- /* We assume these are burst units (multiplied by 2, we need it pari) */
- X1 = video_panning_value_x & 0xfffe;
- X2 = DX - X1;
-
- /* We assume these are field line units (divided by 2, we need it pari) */
- Y1 = video_panning_value_y & 0xfffe;
- Y2 = DY - Y1;
-
- debug("X1=%d, X2=%d, Y1=%d, Y2=%d, DX=%d, DY=%d VIDEO_COLS=%d \n",
- X1, X2, Y1, Y2, DX, DY, VIDEO_COLS);
-
-#ifdef VIDEO_MODE_NTSC
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * Retrace blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 3, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 18, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Odd field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Odd field active area
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-
-/*
- * Odd field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 4, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 32, 1, 0);
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 19, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Even field active area (CENTER)
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 240 - DY, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 3, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 3, 3, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
-/*
- * Even field active area (BOTTOM)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 3, 0, 1, 0, Y2, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 235, 0, 0);
- ADDENTRY (3, 0, 3, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 32, 1, 0);
- }
-/*
- * Vertical blanking
- */
- ADDENTRY (0, 0, 3, 0, 1, 0, 1, 1, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 243, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 3, 0, 1, 1, 32, 1, 1);
-#endif
-
-#ifdef VIDEO_MODE_PAL
-
-#if defined(CONFIG_RRVISION)
-
-#define HPW 160 /* horizontal pulse width (was 139) */
-#define VPW 2 /* vertical pulse width */
-#define HBP 104 /* horizontal back porch (was 112) */
-#define VBP 19 /* vertical back porch (was 19) */
-#define VID_R 240 /* number of rows */
-
- debug ("[VIDEO CTRL] Starting to add controller entries...");
-/*
- * Even field
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
- ADDENTRY (0, 0, 0, 3, 1, 0, VPW, 1, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
- ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-/*
- * Odd field
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, 2, 0, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 0, 0);
-
- ADDENTRY (0, 0, 0, 3, 1, 0, VPW+1, 1, 0);
- ADDENTRY (0, 0, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, VBP, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP + (VIDEO_COLS * 2) + 72, 1, 0);
-/*
- * Active area
- */
- ADDENTRY (0, 3, 0, 3, 1, 0, VID_R , 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP, 0, 0);
- ADDENTRY (3, 3, 0, 3, 0, 0, VIDEO_COLS*2, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, 72, 1, 1);
-
- ADDENTRY (0, 3, 0, 3, 1, 0, 51, 1, 0);
- ADDENTRY (0, 3, 0, 3, 1, 0, HPW-1, 0, 0);
- ADDENTRY (3, 3, 0, 3, 1, 0, HBP +(VIDEO_COLS * 2) + 72 , 1, 0);
-
- debug ("done\n");
-
-#else /* !CONFIG_RRVISION */
-
-/*
- * Hx Vx Fx Bx VDS INT LCYC LP LST
- *
- * vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 22, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * active area (TOP)
- */
- if (Y1 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y1, 1, 0); /* 11? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field active area (CENTER)
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 288 - DY, 1, 0); /* 265? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 8 + X1, 0, 0);
- ADDENTRY (3, 0, 0, 3, 0, 0, VIDEO_COLS * 2, 0, 0);
-
- if (X2 > 0)
- ADDENTRY (3, 0, 0, 1, 1, 0, X2, 0, 0);
-
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * field active area (BOTTOM)
- */
- if (Y2 > 0) {
- ADDENTRY (0, 0, 0, 0, 1, 0, Y2, 1, 0); /* 12? */
- ADDENTRY (3, 0, 0, 0, 1, 0, 255, 0, 0);
- ADDENTRY (3, 0, 0, 3, 1, 0, 1448, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
- }
-/*
- * field vertical; blanking
- */
- ADDENTRY (0, 0, 0, 0, 1, 0, 2, 1, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 263, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 1440, 0, 0);
- ADDENTRY (3, 0, 0, 0, 1, 0, 24, 1, 0);
-/*
- * Create the other field (like this, but whit other field selected,
- * one more cycle loop and a last identifier)
- */
- video_mode_dupefield (vr, &vr[entry], entry);
-#endif /* CONFIG_RRVISION */
-
-#endif /* VIDEO_MODE_PAL */
-
- /* See what FIFO are we using */
- fifo = GETBIT (immap->im_vid.vid_vsr, VIDEO_VSR_CAS);
-
- /* Set number of lines and burst (only one frame for now) */
- if (fifo) {
- immap->im_vid.vid_vfcr0 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- } else {
- immap->im_vid.vid_vfcr1 = VIDEO_BURST_LEN |
- (VIDEO_BURST_LEN << 8) | ((VIDEO_ROWS / 2) << 19);
- }
-
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_ASEL, !fifo);
-
-/*
- * Wait until changes are applied (not done)
- * while (GETBIT(immap->im_vid.vid_vsr, VIDEO_VSR_CAS) == fifo) ;
- */
-
- /* Return number of VRAM entries */
- return entry * 2;
-}
-
-static void video_encoder_init (void)
-{
-#ifdef VIDEO_I2C
- int rc;
-
- /* Initialize the I2C */
- debug ("[VIDEO ENCODER] Initializing I2C bus...\n");
- i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
-#ifdef CONFIG_FADS
- /* Reset ADV7176 chip */
- debug ("[VIDEO ENCODER] Resetting encoder...\n");
- (*(int *) BCSR4) &= ~(1 << 21);
-
- /* Wait for 5 ms inside the reset */
- debug ("[VIDEO ENCODER] Waiting for encoder reset...\n");
- udelay (5000);
-
- /* Take ADV7176 out of reset */
- (*(int *) BCSR4) |= 1 << 21;
-
- /* Wait for 5 ms after the reset */
- udelay (5000);
-#endif /* CONFIG_FADS */
-
- /* Send configuration */
-#ifdef DEBUG
- {
- int i;
-
- puts ("[VIDEO ENCODER] Configuring the encoder...\n");
-
- printf ("Sending %zu bytes (@ %08lX) to I2C 0x%lX:\n ",
- sizeof(video_encoder_data),
- (ulong)video_encoder_data,
- (ulong)VIDEO_I2C_ADDR);
- for (i=0; i<sizeof(video_encoder_data); ++i) {
- printf(" %02X", video_encoder_data[i]);
- }
- putc ('\n');
- }
-#endif /* DEBUG */
-
- if ((rc = i2c_write (VIDEO_I2C_ADDR, 0, 1,
- video_encoder_data,
- sizeof(video_encoder_data))) != 0) {
- printf ("i2c_send error: rc=%d\n", rc);
- return;
- }
-#endif /* VIDEO_I2C */
- return;
-}
-
-static void video_ctrl_init (void *memptr)
-{
- immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-
- video_fb_address = memptr;
-
- /* Set background */
- debug ("[VIDEO CTRL] Setting background color...\n");
- immap->im_vid.vid_vbcb = VIDEO_BG_COL;
-
- /* Show the background */
- debug ("[VIDEO CTRL] Forcing background...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 1);
-
- /* Turn off video controller */
- debug ("[VIDEO CTRL] Turning off video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 0);
-
-#ifdef CONFIG_FADS
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning off video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 1);
-
- /* Disable internal clock */
- debug ("[VIDEO CTRL] Disabling internal clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 0);
-#endif
-
- /* Generate and make active a new video mode */
- debug ("[VIDEO CTRL] Generating video mode...\n");
- video_mode_generate ();
-
- /* Start of frame buffer (even and odd frame, to make it working with */
- /* any selected active set) */
- debug ("[VIDEO CTRL] Setting frame buffer address...\n");
- immap->im_vid.vid_vfaa1 =
- immap->im_vid.vid_vfaa0 = (u32) video_fb_address;
- immap->im_vid.vid_vfba1 =
- immap->im_vid.vid_vfba0 =
- (u32) video_fb_address + VIDEO_LINE_LEN;
-
- /* YUV, Big endian, SHIFT/CLK/CLK input (BEFORE ENABLING 27MHZ EXT CLOCK) */
- debug ("[VIDEO CTRL] Setting pixel mode and clocks...\n");
- immap->im_vid.vid_vccr = 0x2042;
-
- /* Configure port pins */
- debug ("[VIDEO CTRL] Configuring input/output pins...\n");
- immap->im_ioport.iop_pdpar = 0x1fff;
- immap->im_ioport.iop_pddir = 0x0000;
-
-#ifdef CONFIG_FADS
- /* Turn on Video Port Clock - ONLY AFTER SET VCCR TO ENABLE EXTERNAL CLOCK */
- debug ("[VIDEO CTRL] Turning on video clock...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_EXTCLK_BIT, 1);
-
- /* Turn on Video Port LED */
- debug ("[VIDEO CTRL] Turning on video port led...\n");
- SETBIT (*(int *) BCSR4, VIDEO_BCSR4_VIDLED_BIT, 0);
-#endif
-#ifdef CONFIG_RRVISION
- debug ("PC5->Output(1): enable PAL clock");
- immap->im_ioport.iop_pcpar &= ~(0x0400);
- immap->im_ioport.iop_pcdir |= 0x0400 ;
- immap->im_ioport.iop_pcdat |= 0x0400 ;
- debug ("PDPAR=0x%04X PDDIR=0x%04X PDDAT=0x%04X\n",
- immap->im_ioport.iop_pdpar,
- immap->im_ioport.iop_pddir,
- immap->im_ioport.iop_pddat);
- debug ("PCPAR=0x%04X PCDIR=0x%04X PCDAT=0x%04X\n",
- immap->im_ioport.iop_pcpar,
- immap->im_ioport.iop_pcdir,
- immap->im_ioport.iop_pcdat);
-#endif /* CONFIG_RRVISION */
-
- /* Blanking the screen. */
- debug ("[VIDEO CTRL] Blanking the screen...\n");
- video_fill (VIDEO_BG_COL);
-
- /*
- * Turns on Aggressive Mode. Normally, turning on the caches
- * will cause the screen to flicker when the caches try to
- * fill. This gives the FIFO's for the Video Controller
- * higher priority and prevents flickering because of
- * underrun. This may still be an issue when using FLASH,
- * since accessing data from Flash is so slow.
- */
- debug ("[VIDEO CTRL] Turning on aggressive mode...\n");
- immap->im_siu_conf.sc_sdcr = 0x40;
-
- /* Turn on video controller */
- debug ("[VIDEO CTRL] Turning on video controller...\n");
- SETBIT (immap->im_vid.vid_vccr, VIDEO_VCCR_VON, 1);
-
- /* Show the display */
- debug ("[VIDEO CTRL] Enabling the video...\n");
- SETBIT (immap->im_vid.vid_vcmr, VIDEO_VCMR_BD, 0);
-}
-
-/************************************************************************/
-/* ** CONSOLE FUNCTIONS */
-/************************************************************************/
-
-static void console_scrollup (void)
-{
- /* Copy up rows ignoring the first one */
- memcpyl (CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE >> 2);
-
- /* Clear the last one */
- memsetl (CONSOLE_ROW_LAST, CONSOLE_ROW_SIZE >> 2, VIDEO_BG_COL);
-}
-
-static inline void console_back (void)
-{
- console_col--;
-
- if (console_col < 0) {
- console_col = CONSOLE_COLS - 1;
- console_row--;
- if (console_row < 0)
- console_row = 0;
- }
-
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, ' ');
-}
-
-static inline void console_newline (void)
-{
- console_row++;
- console_col = 0;
-
- /* Check if we need to scroll the terminal */
- if (console_row >= CONSOLE_ROWS) {
- /* Scroll everything up */
- console_scrollup ();
-
- /* Decrement row number */
- console_row--;
- }
-}
-
-void video_putc (const char c)
-{
- if (!video_enable) {
- serial_putc (c);
- return;
- }
-
- switch (c) {
- case 13: /* Simply ignore this */
- break;
-
- case '\n': /* Next line, please */
- console_newline ();
- break;
-
- case 9: /* Tab (8 chars alignment) */
- console_col |= 0x0008; /* Next 8 chars boundary */
- console_col &= ~0x0007; /* Set this bit to zero */
-
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- break;
-
- case 8: /* Eat last character */
- console_back ();
- break;
-
- default: /* Add to the console */
- video_putchar ( console_col * VIDEO_FONT_WIDTH,
- console_row * VIDEO_FONT_HEIGHT, c);
- console_col++;
- /* Check if we need to go to next row */
- if (console_col >= CONSOLE_COLS)
- console_newline ();
- }
-}
-
-void video_puts (const char *s)
-{
- int count = strlen (s);
-
- if (!video_enable)
- while (count--)
- serial_putc (*s++);
- else
- while (count--)
- video_putc (*s++);
-}
-
-/************************************************************************/
-/* ** CURSOR BLINKING FUNCTIONS */
-/************************************************************************/
-
-#ifdef VIDEO_BLINK
-
-#define BLINK_TIMER_ID 0
-#define BLINK_TIMER_HZ 2
-
-static unsigned char blink_enabled = 0;
-static timer_t blink_timer;
-
-static void blink_update (void)
-{
- static int blink_row = -1, blink_col = -1, blink_old = 0;
-
- /* Check if we have a new position to invert */
- if ((console_row != blink_row) || (console_col != blink_col)) {
- /* Check if we need to reverse last character */
- if (blink_old)
- video_revchar ( blink_col * VIDEO_FONT_WIDTH,
- (blink_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
- /* Update values */
- blink_row = console_row;
- blink_col = console_col;
- blink_old = 0;
- }
-
-/* Reverse this character */
- blink_old = !blink_old;
- video_revchar ( console_col * VIDEO_FONT_WIDTH,
- (console_row
-#ifdef CONFIG_VIDEO_LOGO
- + VIDEO_LOGO_HEIGHT
-#endif
- ) * VIDEO_FONT_HEIGHT);
-
-}
-
-/*
- * Handler for blinking cursor
- */
-static void blink_handler (void *arg)
-{
-/* Blink */
- blink_update ();
-/* Ack the timer */
- timer_ack (&blink_timer);
-}
-
-int blink_set (int blink)
-{
- int ret = blink_enabled;
-
- if (blink)
- timer_enable (&blink_timer);
- else
- timer_disable (&blink_timer);
-
- blink_enabled = blink;
-
- return ret;
-}
-
-static inline void blink_close (void)
-{
- timer_close (&blink_timer);
-}
-
-static inline void blink_init (void)
-{
- timer_init (&blink_timer,
- BLINK_TIMER_ID, BLINK_TIMER_HZ,
- blink_handler);
-}
-#endif
-
-/************************************************************************/
-/* ** LOGO PLOTTING FUNCTIONS */
-/************************************************************************/
-
-#ifdef CONFIG_VIDEO_LOGO
-void easylogo_plot (fastimage_t * image, void *screen, int width, int x,
- int y)
-{
- int skip = width - image->width, xcount, ycount = image->height;
-
-#ifdef VIDEO_MODE_YUYV
- ushort *source = (ushort *) image->data;
- ushort *dest = (ushort *) screen + y * width + x;
-
- while (ycount--) {
- xcount = image->width;
- while (xcount--)
- *dest++ = *source++;
- dest += skip;
- }
-#endif
-#ifdef VIDEO_MODE_RGB
- unsigned char
- *source = (unsigned short *) image->data,
- *dest = (unsigned short *) screen + ((y * width) + x) * 3;
-
- while (ycount--) {
- xcount = image->width * 3;
- memcpy (dest, source, xcount);
- source += xcount;
- dest += ycount;
- }
-#endif
-}
-
-static void *video_logo (void)
-{
- u16 *screen = video_fb_address, width = VIDEO_COLS;
-#ifdef VIDEO_INFO
-# ifndef CONFIG_FADS
- char temp[32];
-# endif
- char info[80];
-#endif /* VIDEO_INFO */
-
- easylogo_plot (VIDEO_LOGO_ADDR, screen, width, 0, 0);
-
-#ifdef VIDEO_INFO
- sprintf (info, "%s (%s - %s) ",
- U_BOOT_VERSION, U_BOOT_DATE, U_BOOT_TIME);
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y, info);
-
- sprintf (info, "(C) 2002 DENX Software Engineering");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- sprintf (info, " Wolfgang DENK, wd@denx.de");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-#ifndef CONFIG_FADS /* all normal boards */
- /* leave one blank line */
-
- sprintf (info, "MPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash",
- strmhz(temp, gd->cpu_clk),
- gd->ram_size >> 20,
- gd->bd->bi_flashsize >> 20 );
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 4,
- info);
-#else /* FADS :-( */
- sprintf (info, "MPC823 CPU at 50 MHz on FADS823 board");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT,
- info);
-
- sprintf (info, "2MB FLASH - 8MB DRAM - 4MB SRAM");
- video_drawstring (VIDEO_INFO_X, VIDEO_INFO_Y + VIDEO_FONT_HEIGHT * 2,
- info);
-#endif
-#endif
-
- return video_fb_address + VIDEO_LOGO_HEIGHT * VIDEO_LINE_LEN;
-}
-#endif
-
-/************************************************************************/
-/* ** VIDEO HIGH-LEVEL FUNCTIONS */
-/************************************************************************/
-
-static int video_init (void *videobase)
-{
- /* Initialize the encoder */
- debug ("[VIDEO] Initializing video encoder...\n");
- video_encoder_init ();
-
- /* Initialize the video controller */
- debug ("[VIDEO] Initializing video controller at %08x...\n",
- (int) videobase);
- video_ctrl_init (videobase);
-
- /* Setting the palette */
- video_setpalette (CONSOLE_COLOR_BLACK, 0, 0, 0);
- video_setpalette (CONSOLE_COLOR_RED, 0xFF, 0, 0);
- video_setpalette (CONSOLE_COLOR_GREEN, 0, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_YELLOW, 0xFF, 0xFF, 0);
- video_setpalette (CONSOLE_COLOR_BLUE, 0, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_MAGENTA, 0xFF, 0, 0xFF);
- video_setpalette (CONSOLE_COLOR_CYAN, 0, 0xFF, 0xFF);
- video_setpalette (CONSOLE_COLOR_GREY, 0xAA, 0xAA, 0xAA);
- video_setpalette (CONSOLE_COLOR_GREY2, 0xF8, 0xF8, 0xF8);
- video_setpalette (CONSOLE_COLOR_WHITE, 0xFF, 0xFF, 0xFF);
-
-#ifndef CONFIG_SYS_WHITE_ON_BLACK
- video_setfgcolor (CONSOLE_COLOR_BLACK);
- video_setbgcolor (CONSOLE_COLOR_GREY2);
-#else
- video_setfgcolor (CONSOLE_COLOR_GREY2);
- video_setbgcolor (CONSOLE_COLOR_BLACK);
-#endif /* CONFIG_SYS_WHITE_ON_BLACK */
-
-#ifdef CONFIG_VIDEO_LOGO
- /* Paint the logo and retrieve tv base address */
- debug ("[VIDEO] Drawing the logo...\n");
- video_console_address = video_logo ();
-#else
- video_console_address = video_fb_address;
-#endif
-
-#ifdef VIDEO_BLINK
- /* Enable the blinking (under construction) */
- blink_init ();
- blink_set (0); /* To Fix! */
-#endif
-
- /* Initialize the console */
- console_col = 0;
- console_row = 0;
- video_enable = 1;
-
-#ifdef VIDEO_MODE_PAL
-# define VIDEO_MODE_TMP1 "PAL"
-#endif
-#ifdef VIDEO_MODE_NTSC
-# define VIDEO_MODE_TMP1 "NTSC"
-#endif
-#ifdef VIDEO_MODE_YUYV
-# define VIDEO_MODE_TMP2 "YCbYCr"
-#endif
-#ifdef VIDEO_MODE_RGB
-# define VIDEO_MODE_TMP2 "RGB"
-#endif
- debug ( VIDEO_MODE_TMP1
- " %dx%dx%d (" VIDEO_MODE_TMP2 ") on %s - console %dx%d\n",
- VIDEO_COLS, VIDEO_ROWS, VIDEO_MODE_BPP,
- VIDEO_ENCODER_NAME, CONSOLE_COLS, CONSOLE_ROWS);
- return 0;
-}
-
-int drv_video_init (void)
-{
- int error, devices = 1;
-
- struct stdio_dev videodev;
-
- video_init ((void *)(gd->fb_base)); /* Video initialization */
-
-/* Device initialization */
-
- memset (&videodev, 0, sizeof (videodev));
-
- strcpy (videodev.name, "video");
- videodev.ext = DEV_EXT_VIDEO; /* Video extensions */
- videodev.flags = DEV_FLAGS_OUTPUT; /* Output only */
- videodev.putc = video_putc; /* 'putc' function */
- videodev.puts = video_puts; /* 'puts' function */
-
- error = stdio_register (&videodev);
-
- return (error == 0) ? devices : error;
-}
-
-/************************************************************************/
-/* ** ROM capable initialization part - needed to reserve FB memory */
-/************************************************************************/
-
-/*
- * This is called early in the system initialization to grab memory
- * for the video controller.
- * Returns new address for monitor, after reserving video buffer memory
- *
- * Note that this is running from ROM, so no write access to global data.
- */
-ulong video_setmem (ulong addr)
-{
- /* Allocate pages for the frame buffer. */
- addr -= VIDEO_SIZE;
-
- debug ("Reserving %dk for Video Framebuffer at: %08lx\n",
- VIDEO_SIZE>>10, addr);
-
- return (addr);
-}
-
-#endif
diff --git a/cpu/mpc8xx/wlkbd.c b/cpu/mpc8xx/wlkbd.c
deleted file mode 100644
index 13009e2..0000000
--- a/cpu/mpc8xx/wlkbd.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2000
- * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-
-#ifdef CONFIG_WL_4PPM_KEYBOARD
-
-/* WIP: Wireless keyboard on SMC
- */
-int drv_wlkbd_init (void)
-{
- return 0 ;
-}
-
-#endif /* CONFIG_WL_4PPM_KEYBOARD */
diff --git a/cpu/mpc8xxx/Makefile b/cpu/mpc8xxx/Makefile
deleted file mode 100644
index 481f9e5..0000000
--- a/cpu/mpc8xxx/Makefile
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# Copyright 2009 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib8xxx.a
-
-COBJS-y += cpu.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
-COBJS-$(CONFIG_PCI) += pci_cfg.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/cpu/mpc8xxx/cpu.c b/cpu/mpc8xxx/cpu.c
deleted file mode 100644
index 47842e9..0000000
--- a/cpu/mpc8xxx/cpu.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * This file is derived from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c.
- * Basically this file contains cpu specific common code for 85xx/86xx
- * processors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <command.h>
-#include <tsec.h>
-#include <netdev.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-struct cpu_type cpu_type_list [] = {
-#if defined(CONFIG_MPC85xx)
- CPU_TYPE_ENTRY(8533, 8533, 1),
- CPU_TYPE_ENTRY(8533, 8533_E, 1),
- CPU_TYPE_ENTRY(8535, 8535, 1),
- CPU_TYPE_ENTRY(8535, 8535_E, 1),
- CPU_TYPE_ENTRY(8536, 8536, 1),
- CPU_TYPE_ENTRY(8536, 8536_E, 1),
- CPU_TYPE_ENTRY(8540, 8540, 1),
- CPU_TYPE_ENTRY(8541, 8541, 1),
- CPU_TYPE_ENTRY(8541, 8541_E, 1),
- CPU_TYPE_ENTRY(8543, 8543, 1),
- CPU_TYPE_ENTRY(8543, 8543_E, 1),
- CPU_TYPE_ENTRY(8544, 8544, 1),
- CPU_TYPE_ENTRY(8544, 8544_E, 1),
- CPU_TYPE_ENTRY(8545, 8545, 1),
- CPU_TYPE_ENTRY(8545, 8545_E, 1),
- CPU_TYPE_ENTRY(8547, 8547_E, 1),
- CPU_TYPE_ENTRY(8548, 8548, 1),
- CPU_TYPE_ENTRY(8548, 8548_E, 1),
- CPU_TYPE_ENTRY(8555, 8555, 1),
- CPU_TYPE_ENTRY(8555, 8555_E, 1),
- CPU_TYPE_ENTRY(8560, 8560, 1),
- CPU_TYPE_ENTRY(8567, 8567, 1),
- CPU_TYPE_ENTRY(8567, 8567_E, 1),
- CPU_TYPE_ENTRY(8568, 8568, 1),
- CPU_TYPE_ENTRY(8568, 8568_E, 1),
- CPU_TYPE_ENTRY(8569, 8569, 1),
- CPU_TYPE_ENTRY(8569, 8569_E, 1),
- CPU_TYPE_ENTRY(8572, 8572, 2),
- CPU_TYPE_ENTRY(8572, 8572_E, 2),
- CPU_TYPE_ENTRY(P1011, P1011, 1),
- CPU_TYPE_ENTRY(P1011, P1011_E, 1),
- CPU_TYPE_ENTRY(P1012, P1012, 1),
- CPU_TYPE_ENTRY(P1012, P1012_E, 1),
- CPU_TYPE_ENTRY(P1013, P1013, 1),
- CPU_TYPE_ENTRY(P1013, P1013_E, 1),
- CPU_TYPE_ENTRY(P1020, P1020, 2),
- CPU_TYPE_ENTRY(P1020, P1020_E, 2),
- CPU_TYPE_ENTRY(P1021, P1021, 2),
- CPU_TYPE_ENTRY(P1021, P1021_E, 2),
- CPU_TYPE_ENTRY(P1022, P1022, 2),
- CPU_TYPE_ENTRY(P1022, P1022_E, 2),
- CPU_TYPE_ENTRY(P2010, P2010, 1),
- CPU_TYPE_ENTRY(P2010, P2010_E, 1),
- CPU_TYPE_ENTRY(P2020, P2020, 2),
- CPU_TYPE_ENTRY(P2020, P2020_E, 2),
- CPU_TYPE_ENTRY(P4040, P4040, 4),
- CPU_TYPE_ENTRY(P4040, P4040_E, 4),
- CPU_TYPE_ENTRY(P4080, P4080, 8),
- CPU_TYPE_ENTRY(P4080, P4080_E, 8),
-#elif defined(CONFIG_MPC86xx)
- CPU_TYPE_ENTRY(8610, 8610, 1),
- CPU_TYPE_ENTRY(8641, 8641, 2),
- CPU_TYPE_ENTRY(8641D, 8641D, 2),
-#endif
-};
-
-struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 1);
-
-struct cpu_type *identify_cpu(u32 ver)
-{
- int i;
- for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) {
- if (cpu_type_list[i].soc_ver == ver)
- return &cpu_type_list[i];
- }
- return &cpu_type_unknown;
-}
-
-int cpu_numcores() {
- struct cpu_type *cpu;
- cpu = gd->cpu;
- return cpu->num_cores;
-}
-
-int probecpu (void)
-{
- uint svr;
- uint ver;
-
- svr = get_svr();
- ver = SVR_SOC_VER(svr);
-
- gd->cpu = identify_cpu(ver);
-
- return 0;
-}
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_ETHER_ON_FCC)
- fec_initialize(bis);
-#endif
-
-#if defined(CONFIG_UEC_ETH)
- uec_standard_init(bis);
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_MPC85XX_FEC)
- tsec_standard_init(bis);
-#endif
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/Makefile b/cpu/mpc8xxx/ddr/Makefile
deleted file mode 100644
index cb7f856..0000000
--- a/cpu/mpc8xxx/ddr/Makefile
+++ /dev/null
@@ -1,35 +0,0 @@
-#
-# Copyright 2008 Freescale Semiconductor, Inc.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# Version 2 as published by the Free Software Foundation.
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)libddr.a
-
-COBJS-$(CONFIG_FSL_DDR1) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR1) += ddr1_dimm_params.o
-
-COBJS-$(CONFIG_FSL_DDR2) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR2) += ddr2_dimm_params.o
-
-COBJS-$(CONFIG_FSL_DDR3) += main.o util.o ctrl_regs.o options.o \
- lc_common_dimm_params.o
-COBJS-$(CONFIG_FSL_DDR3) += ddr3_dimm_params.o
-
-SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/cpu/mpc8xxx/ddr/common_timing_params.h b/cpu/mpc8xxx/ddr/common_timing_params.h
deleted file mode 100644
index 5aea517..0000000
--- a/cpu/mpc8xxx/ddr/common_timing_params.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef COMMON_TIMING_PARAMS_H
-#define COMMON_TIMING_PARAMS_H
-
-typedef struct {
- /* parameters to constrict */
-
- unsigned int tCKmin_X_ps;
- unsigned int tCKmax_ps;
- unsigned int tCKmax_max_ps;
- unsigned int tRCD_ps;
- unsigned int tRP_ps;
- unsigned int tRAS_ps;
-
- unsigned int tWR_ps; /* maximum = 63750 ps */
- unsigned int tWTR_ps; /* maximum = 63750 ps */
- unsigned int tRFC_ps; /* maximum = 255 ns + 256 ns + .75 ns
- = 511750 ps */
-
- unsigned int tRRD_ps; /* maximum = 63750 ps */
- unsigned int tRC_ps; /* maximum = 254 ns + .75 ns = 254750 ps */
-
- unsigned int refresh_rate_ps;
-
- unsigned int tIS_ps; /* byte 32, spd->ca_setup */
- unsigned int tIH_ps; /* byte 33, spd->ca_hold */
- unsigned int tDS_ps; /* byte 34, spd->data_setup */
- unsigned int tDH_ps; /* byte 35, spd->data_hold */
- unsigned int tRTP_ps; /* byte 38, spd->trtp */
- unsigned int tDQSQ_max_ps; /* byte 44, spd->tdqsq */
- unsigned int tQHS_ps; /* byte 45, spd->tqhs */
-
- unsigned int ndimms_present;
- unsigned int lowest_common_SPD_caslat;
- unsigned int highest_common_derated_caslat;
- unsigned int additive_latency;
- unsigned int all_DIMMs_burst_lengths_bitmask;
- unsigned int all_DIMMs_registered;
- unsigned int all_DIMMs_unbuffered;
- unsigned int all_DIMMs_ECC_capable;
-
- unsigned long long total_mem;
- unsigned long long base_address;
-} common_timing_params_t;
-
-#endif
diff --git a/cpu/mpc8xxx/ddr/ctrl_regs.c b/cpu/mpc8xxx/ddr/ctrl_regs.c
deleted file mode 100644
index 03f9c43..0000000
--- a/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ /dev/null
@@ -1,1366 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-extern unsigned int picos_to_mclk(unsigned int picos);
-/*
- * Determine Rtt value.
- *
- * This should likely be either board or controller specific.
- *
- * Rtt(nominal) - DDR2:
- * 0 = Rtt disabled
- * 1 = 75 ohm
- * 2 = 150 ohm
- * 3 = 50 ohm
- * Rtt(nominal) - DDR3:
- * 0 = Rtt disabled
- * 1 = 60 ohm
- * 2 = 120 ohm
- * 3 = 40 ohm
- * 4 = 20 ohm
- * 5 = 30 ohm
- *
- * FIXME: Apparently 8641 needs a value of 2
- * FIXME: Old code seys if 667 MHz or higher, use 3 on 8572
- *
- * FIXME: There was some effort down this line earlier:
- *
- * unsigned int i;
- * for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL/2; i++) {
- * if (popts->dimmslot[i].num_valid_cs
- * && (popts->cs_local_opts[2*i].odt_rd_cfg
- * || popts->cs_local_opts[2*i].odt_wr_cfg)) {
- * rtt = 2;
- * break;
- * }
- * }
- */
-static inline int fsl_ddr_get_rtt(void)
-{
- int rtt;
-
-#if defined(CONFIG_FSL_DDR1)
- rtt = 0;
-#elif defined(CONFIG_FSL_DDR2)
- rtt = 3;
-#else
- rtt = 0;
-#endif
-
- return rtt;
-}
-
-/*
- * compute the CAS write latency according to DDR3 spec
- * CWL = 5 if tCK >= 2.5ns
- * 6 if 2.5ns > tCK >= 1.875ns
- * 7 if 1.875ns > tCK >= 1.5ns
- * 8 if 1.5ns > tCK >= 1.25ns
- */
-static inline unsigned int compute_cas_write_latency(void)
-{
- unsigned int cwl;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- if (mclk_ps >= 2500)
- cwl = 5;
- else if (mclk_ps >= 1875)
- cwl = 6;
- else if (mclk_ps >= 1500)
- cwl = 7;
- else if (mclk_ps >= 1250)
- cwl = 8;
- else
- cwl = 8;
- return cwl;
-}
-
-/* Chip Select Configuration (CSn_CONFIG) */
-static void set_csn_config(int i, fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const dimm_params_t *dimm_params)
-{
- unsigned int cs_n_en = 0; /* Chip Select enable */
- unsigned int intlv_en = 0; /* Memory controller interleave enable */
- unsigned int intlv_ctl = 0; /* Interleaving control */
- unsigned int ap_n_en = 0; /* Chip select n auto-precharge enable */
- unsigned int odt_rd_cfg = 0; /* ODT for reads configuration */
- unsigned int odt_wr_cfg = 0; /* ODT for writes configuration */
- unsigned int ba_bits_cs_n = 0; /* Num of bank bits for SDRAM on CSn */
- unsigned int row_bits_cs_n = 0; /* Num of row bits for SDRAM on CSn */
- unsigned int col_bits_cs_n = 0; /* Num of ocl bits for SDRAM on CSn */
-
- /* Compute CS_CONFIG only for existing ranks of each DIMM. */
- if ((((i&1) == 0)
- && (dimm_params[i/2].n_ranks == 1))
- || (dimm_params[i/2].n_ranks == 2)) {
- unsigned int n_banks_per_sdram_device;
- cs_n_en = 1;
- if (i == 0) {
- /* These fields only available in CS0_CONFIG */
- intlv_en = popts->memctl_interleaving;
- intlv_ctl = popts->memctl_interleaving_mode;
- }
- ap_n_en = popts->cs_local_opts[i].auto_precharge;
- odt_rd_cfg = popts->cs_local_opts[i].odt_rd_cfg;
- odt_wr_cfg = popts->cs_local_opts[i].odt_wr_cfg;
- n_banks_per_sdram_device
- = dimm_params[i/2].n_banks_per_sdram_device;
- ba_bits_cs_n = __ilog2(n_banks_per_sdram_device) - 2;
- row_bits_cs_n = dimm_params[i/2].n_row_addr - 12;
- col_bits_cs_n = dimm_params[i/2].n_col_addr - 8;
- }
-
- ddr->cs[i].config = (0
- | ((cs_n_en & 0x1) << 31)
- | ((intlv_en & 0x3) << 29)
- | ((intlv_ctl & 0xf) << 24)
- | ((ap_n_en & 0x1) << 23)
-
- /* XXX: some implementation only have 1 bit starting at left */
- | ((odt_rd_cfg & 0x7) << 20)
-
- /* XXX: Some implementation only have 1 bit starting at left */
- | ((odt_wr_cfg & 0x7) << 16)
-
- | ((ba_bits_cs_n & 0x3) << 14)
- | ((row_bits_cs_n & 0x7) << 8)
- | ((col_bits_cs_n & 0x7) << 0)
- );
- debug("FSLDDR: cs[%d]_config = 0x%08x\n", i,ddr->cs[i].config);
-}
-
-/* Chip Select Configuration 2 (CSn_CONFIG_2) */
-/* FIXME: 8572 */
-static void set_csn_config_2(int i, fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int pasr_cfg = 0; /* Partial array self refresh config */
-
- ddr->cs[i].config_2 = ((pasr_cfg & 7) << 24);
- debug("FSLDDR: cs[%d]_config_2 = 0x%08x\n", i, ddr->cs[i].config_2);
-}
-
-/* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
-
-#if !defined(CONFIG_FSL_DDR1)
-/*
- * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
- *
- * Avoid writing for DDR I. The new PQ38 DDR controller
- * dreams up non-zero default values to be backwards compatible.
- */
-static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned char trwt_mclk = 0; /* Read-to-write turnaround */
- unsigned char twrt_mclk = 0; /* Write-to-read turnaround */
- /* 7.5 ns on -3E; 0 means WL - CL + BL/2 + 1 */
- unsigned char trrt_mclk = 0; /* Read-to-read turnaround */
- unsigned char twwt_mclk = 0; /* Write-to-write turnaround */
-
- /* Active powerdown exit timing (tXARD and tXARDS). */
- unsigned char act_pd_exit_mclk;
- /* Precharge powerdown exit timing (tXP). */
- unsigned char pre_pd_exit_mclk;
- /* Precharge powerdown exit timing (tAXPD). */
- unsigned char taxpd_mclk;
- /* Mode register set cycle time (tMRD). */
- unsigned char tmrd_mclk;
-
-#if defined(CONFIG_FSL_DDR3)
- /*
- * (tXARD and tXARDS). Empirical?
- * The DDR3 spec has not tXARD,
- * we use the tXP instead of it.
- * tXP=max(3nCK, 7.5ns) for DDR3.
- * spec has not the tAXPD, we use
- * tAXPD=8, need design to confirm.
- */
- int tXP = max((get_memory_clk_period_ps() * 3), 7500); /* unit=ps */
- act_pd_exit_mclk = picos_to_mclk(tXP);
- /* Mode register MR0[A12] is '1' - fast exit */
- pre_pd_exit_mclk = act_pd_exit_mclk;
- taxpd_mclk = 8;
- tmrd_mclk = 4;
-#else /* CONFIG_FSL_DDR2 */
- /*
- * (tXARD and tXARDS). Empirical?
- * tXARD = 2 for DDR2
- * tXP=2
- * tAXPD=8
- */
- act_pd_exit_mclk = 2;
- pre_pd_exit_mclk = 2;
- taxpd_mclk = 8;
- tmrd_mclk = 2;
-#endif
-
- ddr->timing_cfg_0 = (0
- | ((trwt_mclk & 0x3) << 30) /* RWT */
- | ((twrt_mclk & 0x3) << 28) /* WRT */
- | ((trrt_mclk & 0x3) << 26) /* RRT */
- | ((twwt_mclk & 0x3) << 24) /* WWT */
- | ((act_pd_exit_mclk & 0x7) << 20) /* ACT_PD_EXIT */
- | ((pre_pd_exit_mclk & 0xF) << 16) /* PRE_PD_EXIT */
- | ((taxpd_mclk & 0xf) << 8) /* ODT_PD_EXIT */
- | ((tmrd_mclk & 0xf) << 0) /* MRS_CYC */
- );
- debug("FSLDDR: timing_cfg_0 = 0x%08x\n", ddr->timing_cfg_0);
-}
-#endif /* defined(CONFIG_FSL_DDR2) */
-
-/* DDR SDRAM Timing Configuration 3 (TIMING_CFG_3) */
-static void set_timing_cfg_3(fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Extended Activate to precharge interval (tRAS) */
- unsigned int ext_acttopre = 0;
- unsigned int ext_refrec; /* Extended refresh recovery time (tRFC) */
- unsigned int ext_caslat = 0; /* Extended MCAS latency from READ cmd */
- unsigned int cntl_adj = 0; /* Control Adjust */
-
- /* If the tRAS > 19 MCLK, we use the ext mode */
- if (picos_to_mclk(common_dimm->tRAS_ps) > 0x13)
- ext_acttopre = 1;
-
- ext_refrec = (picos_to_mclk(common_dimm->tRFC_ps) - 8) >> 4;
-
- /* If the CAS latency more than 8, use the ext mode */
- if (cas_latency > 8)
- ext_caslat = 1;
-
- ddr->timing_cfg_3 = (0
- | ((ext_acttopre & 0x1) << 24)
- | ((ext_refrec & 0xF) << 16)
- | ((ext_caslat & 0x1) << 12)
- | ((cntl_adj & 0x7) << 0)
- );
- debug("FSLDDR: timing_cfg_3 = 0x%08x\n", ddr->timing_cfg_3);
-}
-
-/* DDR SDRAM Timing Configuration 1 (TIMING_CFG_1) */
-static void set_timing_cfg_1(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency)
-{
- /* Precharge-to-activate interval (tRP) */
- unsigned char pretoact_mclk;
- /* Activate to precharge interval (tRAS) */
- unsigned char acttopre_mclk;
- /* Activate to read/write interval (tRCD) */
- unsigned char acttorw_mclk;
- /* CASLAT */
- unsigned char caslat_ctrl;
- /* Refresh recovery time (tRFC) ; trfc_low */
- unsigned char refrec_ctrl;
- /* Last data to precharge minimum interval (tWR) */
- unsigned char wrrec_mclk;
- /* Activate-to-activate interval (tRRD) */
- unsigned char acttoact_mclk;
- /* Last write data pair to read command issue interval (tWTR) */
- unsigned char wrtord_mclk;
-
- pretoact_mclk = picos_to_mclk(common_dimm->tRP_ps);
- acttopre_mclk = picos_to_mclk(common_dimm->tRAS_ps);
- acttorw_mclk = picos_to_mclk(common_dimm->tRCD_ps);
-
- /*
- * Translate CAS Latency to a DDR controller field value:
- *
- * CAS Lat DDR I DDR II Ctrl
- * Clocks SPD Bit SPD Bit Value
- * ------- ------- ------- -----
- * 1.0 0 0001
- * 1.5 1 0010
- * 2.0 2 2 0011
- * 2.5 3 0100
- * 3.0 4 3 0101
- * 3.5 5 0110
- * 4.0 4 0111
- * 4.5 1000
- * 5.0 5 1001
- */
-#if defined(CONFIG_FSL_DDR1)
- caslat_ctrl = (cas_latency + 1) & 0x07;
-#elif defined(CONFIG_FSL_DDR2)
- caslat_ctrl = 2 * cas_latency - 1;
-#else
- /*
- * if the CAS latency more than 8 cycle,
- * we need set extend bit for it at
- * TIMING_CFG_3[EXT_CASLAT]
- */
- if (cas_latency > 8)
- cas_latency -= 8;
- caslat_ctrl = 2 * cas_latency - 1;
-#endif
-
- refrec_ctrl = picos_to_mclk(common_dimm->tRFC_ps) - 8;
- wrrec_mclk = picos_to_mclk(common_dimm->tWR_ps);
- if (popts->OTF_burst_chop_en)
- wrrec_mclk += 2;
-
- acttoact_mclk = picos_to_mclk(common_dimm->tRRD_ps);
- /*
- * JEDEC has min requirement for tRRD
- */
-#if defined(CONFIG_FSL_DDR3)
- if (acttoact_mclk < 4)
- acttoact_mclk = 4;
-#endif
- wrtord_mclk = picos_to_mclk(common_dimm->tWTR_ps);
- /*
- * JEDEC has some min requirements for tWTR
- */
-#if defined(CONFIG_FSL_DDR2)
- if (wrtord_mclk < 2)
- wrtord_mclk = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (wrtord_mclk < 4)
- wrtord_mclk = 4;
-#endif
- if (popts->OTF_burst_chop_en)
- wrtord_mclk += 2;
-
- ddr->timing_cfg_1 = (0
- | ((pretoact_mclk & 0x0F) << 28)
- | ((acttopre_mclk & 0x0F) << 24)
- | ((acttorw_mclk & 0xF) << 20)
- | ((caslat_ctrl & 0xF) << 16)
- | ((refrec_ctrl & 0xF) << 12)
- | ((wrrec_mclk & 0x0F) << 8)
- | ((acttoact_mclk & 0x07) << 4)
- | ((wrtord_mclk & 0x07) << 0)
- );
- debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
-}
-
-/* DDR SDRAM Timing Configuration 2 (TIMING_CFG_2) */
-static void set_timing_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- /* Additive latency */
- unsigned char add_lat_mclk;
- /* CAS-to-preamble override */
- unsigned short cpo;
- /* Write latency */
- unsigned char wr_lat;
- /* Read to precharge (tRTP) */
- unsigned char rd_to_pre;
- /* Write command to write data strobe timing adjustment */
- unsigned char wr_data_delay;
- /* Minimum CKE pulse width (tCKE) */
- unsigned char cke_pls;
- /* Window for four activates (tFAW) */
- unsigned short four_act;
-
- /* FIXME add check that this must be less than acttorw_mclk */
- add_lat_mclk = additive_latency;
- cpo = popts->cpo_override;
-
-#if defined(CONFIG_FSL_DDR1)
- /*
- * This is a lie. It should really be 1, but if it is
- * set to 1, bits overlap into the old controller's
- * otherwise unused ACSM field. If we leave it 0, then
- * the HW will magically treat it as 1 for DDR 1. Oh Yea.
- */
- wr_lat = 0;
-#elif defined(CONFIG_FSL_DDR2)
- wr_lat = cas_latency - 1;
-#else
- wr_lat = compute_cas_write_latency();
-#endif
-
- rd_to_pre = picos_to_mclk(common_dimm->tRTP_ps);
- /*
- * JEDEC has some min requirements for tRTP
- */
-#if defined(CONFIG_FSL_DDR2)
- if (rd_to_pre < 2)
- rd_to_pre = 2;
-#elif defined(CONFIG_FSL_DDR3)
- if (rd_to_pre < 4)
- rd_to_pre = 4;
-#endif
- if (additive_latency)
- rd_to_pre += additive_latency;
- if (popts->OTF_burst_chop_en)
- rd_to_pre += 2; /* according to UM */
-
- wr_data_delay = popts->write_data_delay;
- cke_pls = picos_to_mclk(popts->tCKE_clock_pulse_width_ps);
- four_act = picos_to_mclk(popts->tFAW_window_four_activates_ps);
-
- ddr->timing_cfg_2 = (0
- | ((add_lat_mclk & 0xf) << 28)
- | ((cpo & 0x1f) << 23)
- | ((wr_lat & 0xf) << 19)
- | ((rd_to_pre & RD_TO_PRE_MASK) << RD_TO_PRE_SHIFT)
- | ((wr_data_delay & WR_DATA_DELAY_MASK) << WR_DATA_DELAY_SHIFT)
- | ((cke_pls & 0x7) << 6)
- | ((four_act & 0x3f) << 0)
- );
- debug("FSLDDR: timing_cfg_2 = 0x%08x\n", ddr->timing_cfg_2);
-}
-
-/* DDR SDRAM control configuration (DDR_SDRAM_CFG) */
-static void set_ddr_sdram_cfg(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int mem_en; /* DDR SDRAM interface logic enable */
- unsigned int sren; /* Self refresh enable (during sleep) */
- unsigned int ecc_en; /* ECC enable. */
- unsigned int rd_en; /* Registered DIMM enable */
- unsigned int sdram_type; /* Type of SDRAM */
- unsigned int dyn_pwr; /* Dynamic power management mode */
- unsigned int dbw; /* DRAM dta bus width */
- unsigned int eight_be = 0; /* 8-beat burst enable, DDR2 is zero */
- unsigned int ncap = 0; /* Non-concurrent auto-precharge */
- unsigned int threeT_en; /* Enable 3T timing */
- unsigned int twoT_en; /* Enable 2T timing */
- unsigned int ba_intlv_ctl; /* Bank (CS) interleaving control */
- unsigned int x32_en = 0; /* x32 enable */
- unsigned int pchb8 = 0; /* precharge bit 8 enable */
- unsigned int hse; /* Global half strength override */
- unsigned int mem_halt = 0; /* memory controller halt */
- unsigned int bi = 0; /* Bypass initialization */
-
- mem_en = 1;
- sren = popts->self_refresh_in_sleep;
- if (common_dimm->all_DIMMs_ECC_capable) {
- /* Allow setting of ECC only if all DIMMs are ECC. */
- ecc_en = popts->ECC_mode;
- } else {
- ecc_en = 0;
- }
-
- rd_en = (common_dimm->all_DIMMs_registered
- && !common_dimm->all_DIMMs_unbuffered);
-
- sdram_type = CONFIG_FSL_SDRAM_TYPE;
-
- dyn_pwr = popts->dynamic_power;
- dbw = popts->data_bus_width;
- /* 8-beat burst enable DDR-III case
- * we must clear it when use the on-the-fly mode,
- * must set it when use the 32-bits bus mode.
- */
- if (sdram_type == SDRAM_TYPE_DDR3) {
- if (popts->burst_length == DDR_BL8)
- eight_be = 1;
- if (popts->burst_length == DDR_OTF)
- eight_be = 0;
- if (dbw == 0x1)
- eight_be = 1;
- }
-
- threeT_en = popts->threeT_en;
- twoT_en = popts->twoT_en;
- ba_intlv_ctl = popts->ba_intlv_ctl;
- hse = popts->half_strength_driver_enable;
-
- ddr->ddr_sdram_cfg = (0
- | ((mem_en & 0x1) << 31)
- | ((sren & 0x1) << 30)
- | ((ecc_en & 0x1) << 29)
- | ((rd_en & 0x1) << 28)
- | ((sdram_type & 0x7) << 24)
- | ((dyn_pwr & 0x1) << 21)
- | ((dbw & 0x3) << 19)
- | ((eight_be & 0x1) << 18)
- | ((ncap & 0x1) << 17)
- | ((threeT_en & 0x1) << 16)
- | ((twoT_en & 0x1) << 15)
- | ((ba_intlv_ctl & 0x7F) << 8)
- | ((x32_en & 0x1) << 5)
- | ((pchb8 & 0x1) << 4)
- | ((hse & 0x1) << 3)
- | ((mem_halt & 0x1) << 1)
- | ((bi & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg = 0x%08x\n", ddr->ddr_sdram_cfg);
-}
-
-/* DDR SDRAM control configuration 2 (DDR_SDRAM_CFG_2) */
-static void set_ddr_sdram_cfg_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int frc_sr = 0; /* Force self refresh */
- unsigned int sr_ie = 0; /* Self-refresh interrupt enable */
- unsigned int dll_rst_dis; /* DLL reset disable */
- unsigned int dqs_cfg; /* DQS configuration */
- unsigned int odt_cfg; /* ODT configuration */
- unsigned int num_pr; /* Number of posted refreshes */
- unsigned int obc_cfg; /* On-The-Fly Burst Chop Cfg */
- unsigned int ap_en; /* Address Parity Enable */
- unsigned int d_init; /* DRAM data initialization */
- unsigned int rcw_en = 0; /* Register Control Word Enable */
- unsigned int md_en = 0; /* Mirrored DIMM Enable */
-
- dll_rst_dis = 1; /* Make this configurable */
- dqs_cfg = popts->DQS_config;
- if (popts->cs_local_opts[0].odt_rd_cfg
- || popts->cs_local_opts[0].odt_wr_cfg) {
- /* FIXME */
- odt_cfg = 2;
- } else {
- odt_cfg = 0;
- }
-
- num_pr = 1; /* Make this configurable */
-
- /*
- * 8572 manual says
- * {TIMING_CFG_1[PRETOACT]
- * + [DDR_SDRAM_CFG_2[NUM_PR]
- * * ({EXT_REFREC || REFREC} + 8 + 2)]}
- * << DDR_SDRAM_INTERVAL[REFINT]
- */
-#if defined(CONFIG_FSL_DDR3)
- obc_cfg = popts->OTF_burst_chop_en;
-#else
- obc_cfg = 0;
-#endif
-
- ap_en = 0; /* Make this configurable? */
-
-#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /* Use the DDR controller to auto initialize memory. */
- d_init = 1;
- ddr->ddr_data_init = CONFIG_MEM_INIT_VALUE;
- debug("DDR: ddr_data_init = 0x%08x\n", ddr->ddr_data_init);
-#else
- /* Memory will be initialized via DMA, or not at all. */
- d_init = 0;
-#endif
-
-#if defined(CONFIG_FSL_DDR3)
- md_en = popts->mirrored_dimm;
-#endif
- ddr->ddr_sdram_cfg_2 = (0
- | ((frc_sr & 0x1) << 31)
- | ((sr_ie & 0x1) << 30)
- | ((dll_rst_dis & 0x1) << 29)
- | ((dqs_cfg & 0x3) << 26)
- | ((odt_cfg & 0x3) << 21)
- | ((num_pr & 0xf) << 12)
- | ((obc_cfg & 0x1) << 6)
- | ((ap_en & 0x1) << 5)
- | ((d_init & 0x1) << 4)
- | ((rcw_en & 0x1) << 2)
- | ((md_en & 0x1) << 0)
- );
- debug("FSLDDR: ddr_sdram_cfg_2 = 0x%08x\n", ddr->ddr_sdram_cfg_2);
-}
-
-/* DDR SDRAM Mode configuration 2 (DDR_SDRAM_MODE_2) */
-static void set_ddr_sdram_mode_2(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned short esdmode2 = 0; /* Extended SDRAM mode 2 */
- unsigned short esdmode3 = 0; /* Extended SDRAM mode 3 */
-
-#if defined(CONFIG_FSL_DDR3)
- unsigned int rtt_wr = 0; /* Rtt_WR - dynamic ODT off */
- unsigned int srt = 0; /* self-refresh temerature, normal range */
- unsigned int asr = 0; /* auto self-refresh disable */
- unsigned int cwl = compute_cas_write_latency() - 5;
- unsigned int pasr = 0; /* partial array self refresh disable */
-
- if (popts->rtt_override)
- rtt_wr = popts->rtt_wr_override_value;
-
- esdmode2 = (0
- | ((rtt_wr & 0x3) << 9)
- | ((srt & 0x1) << 7)
- | ((asr & 0x1) << 6)
- | ((cwl & 0x7) << 3)
- | ((pasr & 0x7) << 0));
-#endif
- ddr->ddr_sdram_mode_2 = (0
- | ((esdmode2 & 0xFFFF) << 16)
- | ((esdmode3 & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode_2 = 0x%08x\n", ddr->ddr_sdram_mode_2);
-}
-
-/* DDR SDRAM Interval Configuration (DDR_SDRAM_INTERVAL) */
-static void set_ddr_sdram_interval(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm)
-{
- unsigned int refint; /* Refresh interval */
- unsigned int bstopre; /* Precharge interval */
-
- refint = picos_to_mclk(common_dimm->refresh_rate_ps);
-
- bstopre = popts->bstopre;
-
- /* refint field used 0x3FFF in earlier controllers */
- ddr->ddr_sdram_interval = (0
- | ((refint & 0xFFFF) << 16)
- | ((bstopre & 0x3FFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_interval = 0x%08x\n", ddr->ddr_sdram_interval);
-}
-
-#if defined(CONFIG_FSL_DDR3)
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /* Mode Register - MR1 */
- unsigned int qoff = 0; /* Output buffer enable 0=yes, 1=no */
- unsigned int tdqs_en = 0; /* TDQS Enable: 0=no, 1=yes */
- unsigned int rtt;
- unsigned int wrlvl_en = 0; /* Write level enable: 0=no, 1=yes */
- unsigned int al = 0; /* Posted CAS# additive latency (AL) */
- unsigned int dic = 1; /* Output driver impedance, 34ohm */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register - MR0 */
- unsigned int dll_on; /* DLL control for precharge PD, 0=off, 1=on */
- unsigned int wr; /* Write Recovery */
- unsigned int dll_rst; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 4;/* CAS# latency, default set as 6 cycles */
- /* BT: Burst Type (0=Nibble Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
- unsigned int wr_mclk;
-
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- rtt = fsl_ddr_get_rtt();
- if (popts->rtt_override)
- rtt = popts->rtt_override_value;
-
- if (additive_latency == (cas_latency - 1))
- al = 1;
- if (additive_latency == (cas_latency - 2))
- al = 2;
-
- /*
- * The esdmode value will also be used for writing
- * MR1 during write leveling for DDR3, although the
- * bits specifically related to the write leveling
- * scheme will be handled automatically by the DDR
- * controller. so we set the wrlvl_en = 0 here.
- */
- esdmode = (0
- | ((qoff & 0x1) << 12)
- | ((tdqs_en & 0x1) << 11)
- | ((rtt & 0x4) << 7) /* rtt field is split */
- | ((wrlvl_en & 0x1) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((dic & 0x2) << 4) /* DIC field is split */
- | ((al & 0x3) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((dic & 0x1) << 1) /* DIC field is split */
- | ((dll_en & 0x1) << 0)
- );
-
- /*
- * DLL control for precharge PD
- * 0=slow exit DLL off (tXPDLL)
- * 1=fast exit DLL on (tXP)
- */
- dll_on = 1;
- wr_mclk = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps;
- if (wr_mclk >= 12)
- wr = 6;
- else if (wr_mclk >= 9)
- wr = 5;
- else
- wr = wr_mclk - 4;
- dll_rst = 0; /* dll no reset */
- mode = 0; /* normal mode */
-
- /* look up table to get the cas latency bits */
- if (cas_latency >= 5 && cas_latency <= 11) {
- unsigned char cas_latency_table[7] = {
- 0x2, /* 5 clocks */
- 0x4, /* 6 clocks */
- 0x6, /* 7 clocks */
- 0x8, /* 8 clocks */
- 0xa, /* 9 clocks */
- 0xc, /* 10 clocks */
- 0xe /* 11 clocks */
- };
- caslat = cas_latency_table[cas_latency - 5];
- }
- bt = 0; /* Nibble sequential */
-
- switch (popts->burst_length) {
- case DDR_BL8:
- bl = 0;
- break;
- case DDR_OTF:
- bl = 1;
- break;
- case DDR_BC4:
- bl = 2;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to on-the-fly BC4 or BL8 beats.\n",
- popts->burst_length);
- bl = 1;
- break;
- }
-
- sdmode = (0
- | ((dll_on & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_rst & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | (((caslat >> 1) & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((bl & 0x3) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
-
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-}
-
-#else /* !CONFIG_FSL_DDR3 */
-
-/* DDR SDRAM Mode configuration set (DDR_SDRAM_MODE) */
-static void set_ddr_sdram_mode(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts,
- const common_timing_params_t *common_dimm,
- unsigned int cas_latency,
- unsigned int additive_latency)
-{
- unsigned short esdmode; /* Extended SDRAM mode */
- unsigned short sdmode; /* SDRAM mode */
-
- /*
- * FIXME: This ought to be pre-calculated in a
- * technology-specific routine,
- * e.g. compute_DDR2_mode_register(), and then the
- * sdmode and esdmode passed in as part of common_dimm.
- */
-
- /* Extended Mode Register */
- unsigned int mrs = 0; /* Mode Register Set */
- unsigned int outputs = 0; /* 0=Enabled, 1=Disabled */
- unsigned int rdqs_en = 0; /* RDQS Enable: 0=no, 1=yes */
- unsigned int dqs_en = 0; /* DQS# Enable: 0=enable, 1=disable */
- unsigned int ocd = 0; /* 0x0=OCD not supported,
- 0x7=OCD default state */
- unsigned int rtt;
- unsigned int al; /* Posted CAS# additive latency (AL) */
- unsigned int ods = 0; /* Output Drive Strength:
- 0 = Full strength (18ohm)
- 1 = Reduced strength (4ohm) */
- unsigned int dll_en = 0; /* DLL Enable 0=Enable (Normal),
- 1=Disable (Test/Debug) */
-
- /* Mode Register (MR) */
- unsigned int mr; /* Mode Register Definition */
- unsigned int pd; /* Power-Down Mode */
- unsigned int wr; /* Write Recovery */
- unsigned int dll_res; /* DLL Reset */
- unsigned int mode; /* Normal=0 or Test=1 */
- unsigned int caslat = 0;/* CAS# latency */
- /* BT: Burst Type (0=Sequential, 1=Interleaved) */
- unsigned int bt;
- unsigned int bl; /* BL: Burst Length */
-
-#if defined(CONFIG_FSL_DDR2)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-#endif
-
- rtt = fsl_ddr_get_rtt();
-
- al = additive_latency;
-
- esdmode = (0
- | ((mrs & 0x3) << 14)
- | ((outputs & 0x1) << 12)
- | ((rdqs_en & 0x1) << 11)
- | ((dqs_en & 0x1) << 10)
- | ((ocd & 0x7) << 7)
- | ((rtt & 0x2) << 5) /* rtt field is split */
- | ((al & 0x7) << 3)
- | ((rtt & 0x1) << 2) /* rtt field is split */
- | ((ods & 0x1) << 1)
- | ((dll_en & 0x1) << 0)
- );
-
- mr = 0; /* FIXME: CHECKME */
-
- /*
- * 0 = Fast Exit (Normal)
- * 1 = Slow Exit (Low Power)
- */
- pd = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- wr = 0; /* Historical */
-#elif defined(CONFIG_FSL_DDR2)
- wr = (common_dimm->tWR_ps + mclk_ps - 1) / mclk_ps - 1;
-#endif
- dll_res = 0;
- mode = 0;
-
-#if defined(CONFIG_FSL_DDR1)
- if (1 <= cas_latency && cas_latency <= 4) {
- unsigned char mode_caslat_table[4] = {
- 0x5, /* 1.5 clocks */
- 0x2, /* 2.0 clocks */
- 0x6, /* 2.5 clocks */
- 0x3 /* 3.0 clocks */
- };
- caslat = mode_caslat_table[cas_latency - 1];
- } else {
- printf("Warning: unknown cas_latency %d\n", cas_latency);
- }
-#elif defined(CONFIG_FSL_DDR2)
- caslat = cas_latency;
-#endif
- bt = 0;
-
- switch (popts->burst_length) {
- case DDR_BL4:
- bl = 2;
- break;
- case DDR_BL8:
- bl = 3;
- break;
- default:
- printf("Error: invalid burst length of %u specified. "
- " Defaulting to 4 beats.\n",
- popts->burst_length);
- bl = 2;
- break;
- }
-
- sdmode = (0
- | ((mr & 0x3) << 14)
- | ((pd & 0x1) << 12)
- | ((wr & 0x7) << 9)
- | ((dll_res & 0x1) << 8)
- | ((mode & 0x1) << 7)
- | ((caslat & 0x7) << 4)
- | ((bt & 0x1) << 3)
- | ((bl & 0x7) << 0)
- );
-
- ddr->ddr_sdram_mode = (0
- | ((esdmode & 0xFFFF) << 16)
- | ((sdmode & 0xFFFF) << 0)
- );
- debug("FSLDDR: ddr_sdram_mode = 0x%08x\n", ddr->ddr_sdram_mode);
-}
-#endif
-
-/* DDR SDRAM Data Initialization (DDR_DATA_INIT) */
-static void set_ddr_data_init(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_value; /* Initialization value */
-
- init_value = 0xDEADBEEF;
- ddr->ddr_data_init = init_value;
-}
-
-/*
- * DDR SDRAM Clock Control (DDR_SDRAM_CLK_CNTL)
- * The old controller on the 8540/60 doesn't have this register.
- * Hope it's OK to set it (to 0) anyway.
- */
-static void set_ddr_sdram_clk_cntl(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int clk_adjust; /* Clock adjust */
-
- clk_adjust = popts->clk_adjust;
- ddr->ddr_sdram_clk_cntl = (clk_adjust & 0xF) << 23;
-}
-
-/* DDR Initialization Address (DDR_INIT_ADDR) */
-static void set_ddr_init_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int init_addr = 0; /* Initialization address */
-
- ddr->ddr_init_addr = init_addr;
-}
-
-/* DDR Initialization Address (DDR_INIT_EXT_ADDR) */
-static void set_ddr_init_ext_addr(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int uia = 0; /* Use initialization address */
- unsigned int init_ext_addr = 0; /* Initialization address */
-
- ddr->ddr_init_ext_addr = (0
- | ((uia & 0x1) << 31)
- | (init_ext_addr & 0xF)
- );
-}
-
-/* DDR SDRAM Timing Configuration 4 (TIMING_CFG_4) */
-static void set_timing_cfg_4(fsl_ddr_cfg_regs_t *ddr,
- const memctl_options_t *popts)
-{
- unsigned int rwt = 0; /* Read-to-write turnaround for same CS */
- unsigned int wrt = 0; /* Write-to-read turnaround for same CS */
- unsigned int rrt = 0; /* Read-to-read turnaround for same CS */
- unsigned int wwt = 0; /* Write-to-write turnaround for same CS */
- unsigned int dll_lock = 0; /* DDR SDRAM DLL Lock Time */
-
-#if defined(CONFIG_FSL_DDR3)
- if (popts->burst_length == DDR_BL8) {
- /* We set BL/2 for fixed BL8 */
- rrt = 0; /* BL/2 clocks */
- wwt = 0; /* BL/2 clocks */
- } else {
- /* We need to set BL/2 + 2 to BC4 and OTF */
- rrt = 2; /* BL/2 + 2 clocks */
- wwt = 2; /* BL/2 + 2 clocks */
- }
- dll_lock = 1; /* tDLLK = 512 clocks from spec */
-#endif
- ddr->timing_cfg_4 = (0
- | ((rwt & 0xf) << 28)
- | ((wrt & 0xf) << 24)
- | ((rrt & 0xf) << 20)
- | ((wwt & 0xf) << 16)
- | (dll_lock & 0x3)
- );
- debug("FSLDDR: timing_cfg_4 = 0x%08x\n", ddr->timing_cfg_4);
-}
-
-/* DDR SDRAM Timing Configuration 5 (TIMING_CFG_5) */
-static void set_timing_cfg_5(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rodt_on = 0; /* Read to ODT on */
- unsigned int rodt_off = 0; /* Read to ODT off */
- unsigned int wodt_on = 0; /* Write to ODT on */
- unsigned int wodt_off = 0; /* Write to ODT off */
-
-#if defined(CONFIG_FSL_DDR3)
- rodt_on = 3; /* 2 clocks */
- rodt_off = 4; /* 4 clocks */
- wodt_on = 2; /* 1 clocks */
- wodt_off = 4; /* 4 clocks */
-#endif
-
- ddr->timing_cfg_5 = (0
- | ((rodt_on & 0x1f) << 24)
- | ((rodt_off & 0x7) << 20)
- | ((wodt_on & 0x1f) << 12)
- | ((wodt_off & 0x7) << 8)
- );
- debug("FSLDDR: timing_cfg_5 = 0x%08x\n", ddr->timing_cfg_5);
-}
-
-/* DDR ZQ Calibration Control (DDR_ZQ_CNTL) */
-static void set_ddr_zq_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int zq_en)
-{
- unsigned int zqinit = 0;/* POR ZQ Calibration Time (tZQinit) */
- /* Normal Operation Full Calibration Time (tZQoper) */
- unsigned int zqoper = 0;
- /* Normal Operation Short Calibration Time (tZQCS) */
- unsigned int zqcs = 0;
-
- if (zq_en) {
- zqinit = 9; /* 512 clocks */
- zqoper = 8; /* 256 clocks */
- zqcs = 6; /* 64 clocks */
- }
-
- ddr->ddr_zq_cntl = (0
- | ((zq_en & 0x1) << 31)
- | ((zqinit & 0xF) << 24)
- | ((zqoper & 0xF) << 16)
- | ((zqcs & 0xF) << 8)
- );
-}
-
-/* DDR Write Leveling Control (DDR_WRLVL_CNTL) */
-static void set_ddr_wrlvl_cntl(fsl_ddr_cfg_regs_t *ddr, unsigned int wrlvl_en,
- const memctl_options_t *popts)
-{
- /*
- * First DQS pulse rising edge after margining mode
- * is programmed (tWL_MRD)
- */
- unsigned int wrlvl_mrd = 0;
- /* ODT delay after margining mode is programmed (tWL_ODTEN) */
- unsigned int wrlvl_odten = 0;
- /* DQS/DQS_ delay after margining mode is programmed (tWL_DQSEN) */
- unsigned int wrlvl_dqsen = 0;
- /* WRLVL_SMPL: Write leveling sample time */
- unsigned int wrlvl_smpl = 0;
- /* WRLVL_WLR: Write leveling repeition time */
- unsigned int wrlvl_wlr = 0;
- /* WRLVL_START: Write leveling start time */
- unsigned int wrlvl_start = 0;
-
- /* suggest enable write leveling for DDR3 due to fly-by topology */
- if (wrlvl_en) {
- /* tWL_MRD min = 40 nCK, we set it 64 */
- wrlvl_mrd = 0x6;
- /* tWL_ODTEN 128 */
- wrlvl_odten = 0x7;
- /* tWL_DQSEN min = 25 nCK, we set it 32 */
- wrlvl_dqsen = 0x5;
- /*
- * Write leveling sample time at least need 6 clocks
- * higher than tWLO to allow enough time for progagation
- * delay and sampling the prime data bits.
- */
- wrlvl_smpl = 0xf;
- /*
- * Write leveling repetition time
- * at least tWLO + 6 clocks clocks
- * we set it 32
- */
- wrlvl_wlr = 0x5;
- /*
- * Write leveling start time
- * The value use for the DQS_ADJUST for the first sample
- * when write leveling is enabled.
- */
- wrlvl_start = 0x8;
- /*
- * Override the write leveling sample and start time
- * according to specific board
- */
- if (popts->wrlvl_override) {
- wrlvl_smpl = popts->wrlvl_sample;
- wrlvl_start = popts->wrlvl_start;
- }
- }
-
- ddr->ddr_wrlvl_cntl = (0
- | ((wrlvl_en & 0x1) << 31)
- | ((wrlvl_mrd & 0x7) << 24)
- | ((wrlvl_odten & 0x7) << 20)
- | ((wrlvl_dqsen & 0x7) << 16)
- | ((wrlvl_smpl & 0xf) << 12)
- | ((wrlvl_wlr & 0x7) << 8)
- | ((wrlvl_start & 0x1F) << 0)
- );
-}
-
-/* DDR Self Refresh Counter (DDR_SR_CNTR) */
-static void set_ddr_sr_cntr(fsl_ddr_cfg_regs_t *ddr, unsigned int sr_it)
-{
- /* Self Refresh Idle Threshold */
- ddr->ddr_sr_cntr = (sr_it & 0xF) << 16;
-}
-
-/* DDR SDRAM Register Control Word 1 (DDR_SDRAM_RCW_1) */
-static void set_ddr_sdram_rcw_1(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rcw0 = 0; /* RCW0: Register Control Word 0 */
- unsigned int rcw1 = 0; /* RCW1: Register Control Word 1 */
- unsigned int rcw2 = 0; /* RCW2: Register Control Word 2 */
- unsigned int rcw3 = 0; /* RCW3: Register Control Word 3 */
- unsigned int rcw4 = 0; /* RCW4: Register Control Word 4 */
- unsigned int rcw5 = 0; /* RCW5: Register Control Word 5 */
- unsigned int rcw6 = 0; /* RCW6: Register Control Word 6 */
- unsigned int rcw7 = 0; /* RCW7: Register Control Word 7 */
-
- ddr->ddr_sdram_rcw_1 = (0
- | ((rcw0 & 0xF) << 28)
- | ((rcw1 & 0xF) << 24)
- | ((rcw2 & 0xF) << 20)
- | ((rcw3 & 0xF) << 16)
- | ((rcw4 & 0xF) << 12)
- | ((rcw5 & 0xF) << 8)
- | ((rcw6 & 0xF) << 4)
- | ((rcw7 & 0xF) << 0)
- );
-}
-
-/* DDR SDRAM Register Control Word 2 (DDR_SDRAM_RCW_2) */
-static void set_ddr_sdram_rcw_2(fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int rcw8 = 0; /* RCW0: Register Control Word 8 */
- unsigned int rcw9 = 0; /* RCW1: Register Control Word 9 */
- unsigned int rcw10 = 0; /* RCW2: Register Control Word 10 */
- unsigned int rcw11 = 0; /* RCW3: Register Control Word 11 */
- unsigned int rcw12 = 0; /* RCW4: Register Control Word 12 */
- unsigned int rcw13 = 0; /* RCW5: Register Control Word 13 */
- unsigned int rcw14 = 0; /* RCW6: Register Control Word 14 */
- unsigned int rcw15 = 0; /* RCW7: Register Control Word 15 */
-
- ddr->ddr_sdram_rcw_2 = (0
- | ((rcw8 & 0xF) << 28)
- | ((rcw9 & 0xF) << 24)
- | ((rcw10 & 0xF) << 20)
- | ((rcw11 & 0xF) << 16)
- | ((rcw12 & 0xF) << 12)
- | ((rcw13 & 0xF) << 8)
- | ((rcw14 & 0xF) << 4)
- | ((rcw15 & 0xF) << 0)
- );
-}
-
-unsigned int
-check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
-{
- unsigned int res = 0;
-
- /*
- * Check that DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] are
- * not set at the same time.
- */
- if (ddr->ddr_sdram_cfg & 0x10000000
- && ddr->ddr_sdram_cfg & 0x00008000) {
- printf("Error: DDR_SDRAM_CFG[RD_EN] and DDR_SDRAM_CFG[2T_EN] "
- " should not be set at the same time.\n");
- res++;
- }
-
- return res;
-}
-
-unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_params,
- unsigned int dbw_cap_adj)
-{
- unsigned int i;
- unsigned int cas_latency;
- unsigned int additive_latency;
- unsigned int sr_it;
- unsigned int zq_en;
- unsigned int wrlvl_en;
-
- memset(ddr, 0, sizeof(fsl_ddr_cfg_regs_t));
-
- if (common_dimm == NULL) {
- printf("Error: subset DIMM params struct null pointer\n");
- return 1;
- }
-
- /*
- * Process overrides first.
- *
- * FIXME: somehow add dereated caslat to this
- */
- cas_latency = (popts->cas_latency_override)
- ? popts->cas_latency_override_value
- : common_dimm->lowest_common_SPD_caslat;
-
- additive_latency = (popts->additive_latency_override)
- ? popts->additive_latency_override_value
- : common_dimm->additive_latency;
-
- sr_it = (popts->auto_self_refresh_en)
- ? popts->sr_it
- : 0;
- /* ZQ calibration */
- zq_en = (popts->zq_en) ? 1 : 0;
- /* write leveling */
- wrlvl_en = (popts->wrlvl_en) ? 1 : 0;
-
- /* Chip Select Memory Bounds (CSn_BNDS) */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- unsigned long long ea = 0, sa = 0;
-
- if (popts->ba_intlv_ctl && (i > 0) &&
- ((popts->ba_intlv_ctl & 0x60) != FSL_DDR_CS2_CS3 )) {
- /* Don't set up boundaries for other CS
- * other than CS0, if bank interleaving
- * is enabled and not CS2+CS3 interleaved.
- * But we need to set the ODT_RD_CFG and
- * ODT_WR_CFG for CS1_CONFIG here.
- */
- set_csn_config(i, ddr, popts, dimm_params);
- break;
- }
-
- if (dimm_params[i/2].n_ranks == 0) {
- debug("Skipping setup of CS%u "
- "because n_ranks on DIMM %u is 0\n", i, i/2);
- continue;
- }
- if (popts->memctl_interleaving && popts->ba_intlv_ctl) {
- /*
- * This works superbank 2CS
- * There are 2 memory controllers configured
- * identically, memory is interleaved between them,
- * and each controller uses rank interleaving within
- * itself. Therefore the starting and ending address
- * on each controller is twice the amount present on
- * each controller.
- */
- unsigned long long rank_density
- = dimm_params[0].capacity;
- ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
- }
- else if (!popts->memctl_interleaving && popts->ba_intlv_ctl) {
- /*
- * If memory interleaving between controllers is NOT
- * enabled, the starting address for each memory
- * controller is distinct. However, because rank
- * interleaving is enabled, the starting and ending
- * addresses of the total memory on that memory
- * controller needs to be programmed into its
- * respective CS0_BNDS.
- */
- unsigned long long rank_density
- = dimm_params[i/2].rank_density;
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- /* CS0+CS1+CS2+CS3 interleaving, only CS0_CNDS
- * needs to be set.
- */
- sa = common_dimm->base_address;
- ea = sa + (4 * (rank_density >> dbw_cap_adj))-1;
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- /* CS0+CS1 and CS2+CS3 interleaving, CS0_CNDS
- * and CS2_CNDS need to be set.
- */
- if (!(i&1)) {
- sa = dimm_params[i/2].base_address;
- ea = sa + (i * (rank_density >>
- dbw_cap_adj)) - 1;
- }
- break;
- case FSL_DDR_CS0_CS1:
- /* CS0+CS1 interleaving, CS0_CNDS needs
- * to be set
- */
- sa = common_dimm->base_address;
- ea = sa + (2 * (rank_density >> dbw_cap_adj))-1;
- break;
- case FSL_DDR_CS2_CS3:
- /* CS2+CS3 interleaving*/
- if (i == 2) {
- sa = dimm_params[i/2].base_address;
- ea = sa + (2 * (rank_density >>
- dbw_cap_adj)) - 1;
- }
- break;
- default: /* No bank(chip-select) interleaving */
- break;
- }
- }
- else if (popts->memctl_interleaving && !popts->ba_intlv_ctl) {
- /*
- * Only the rank on CS0 of each memory controller may
- * be used if memory controller interleaving is used
- * without rank interleaving within each memory
- * controller. However, the ending address programmed
- * into each CS0 must be the sum of the amount of
- * memory in the two CS0 ranks.
- */
- if (i == 0) {
- unsigned long long rank_density
- = dimm_params[0].rank_density;
- ea = (2 * (rank_density >> dbw_cap_adj)) - 1;
- }
-
- }
- else if (!popts->memctl_interleaving && !popts->ba_intlv_ctl) {
- /*
- * No rank interleaving and no memory controller
- * interleaving.
- */
- unsigned long long rank_density
- = dimm_params[i/2].rank_density;
- sa = dimm_params[i/2].base_address;
- ea = sa + (rank_density >> dbw_cap_adj) - 1;
- if (i&1) {
- if ((dimm_params[i/2].n_ranks == 1)) {
- /* Odd chip select, single-rank dimm */
- sa = 0;
- ea = 0;
- } else {
- /* Odd chip select, dual-rank DIMM */
- sa += rank_density >> dbw_cap_adj;
- ea += rank_density >> dbw_cap_adj;
- }
- }
- }
-
- sa >>= 24;
- ea >>= 24;
-
- ddr->cs[i].bnds = (0
- | ((sa & 0xFFF) << 16) /* starting address MSB */
- | ((ea & 0xFFF) << 0) /* ending address MSB */
- );
-
- debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
- set_csn_config(i, ddr, popts, dimm_params);
- set_csn_config_2(i, ddr);
- }
-
-#if !defined(CONFIG_FSL_DDR1)
- set_timing_cfg_0(ddr);
-#endif
-
- set_timing_cfg_3(ddr, common_dimm, cas_latency);
- set_timing_cfg_1(ddr, popts, common_dimm, cas_latency);
- set_timing_cfg_2(ddr, popts, common_dimm,
- cas_latency, additive_latency);
-
- set_ddr_sdram_cfg(ddr, popts, common_dimm);
-
- set_ddr_sdram_cfg_2(ddr, popts);
- set_ddr_sdram_mode(ddr, popts, common_dimm,
- cas_latency, additive_latency);
- set_ddr_sdram_mode_2(ddr, popts);
- set_ddr_sdram_interval(ddr, popts, common_dimm);
- set_ddr_data_init(ddr);
- set_ddr_sdram_clk_cntl(ddr, popts);
- set_ddr_init_addr(ddr);
- set_ddr_init_ext_addr(ddr);
- set_timing_cfg_4(ddr, popts);
- set_timing_cfg_5(ddr);
-
- set_ddr_zq_cntl(ddr, zq_en);
- set_ddr_wrlvl_cntl(ddr, wrlvl_en, popts);
-
- set_ddr_sr_cntr(ddr, sr_it);
-
- set_ddr_sdram_rcw_1(ddr);
- set_ddr_sdram_rcw_2(ddr);
-
- return check_fsl_memctl_config_regs(ddr);
-}
diff --git a/cpu/mpc8xxx/ddr/ddr.h b/cpu/mpc8xxx/ddr/ddr.h
deleted file mode 100644
index f122075..0000000
--- a/cpu/mpc8xxx/ddr/ddr.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#ifndef FSL_DDR_MAIN_H
-#define FSL_DDR_MAIN_H
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-#include "common_timing_params.h"
-
-/*
- * Bind the main DDR setup driver's generic names
- * to this specific DDR technology.
- */
-static __inline__ int
-compute_dimm_parameters(const generic_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- return ddr_compute_dimm_parameters(spd, pdimm, dimm_number);
-}
-
-/*
- * Data Structures
- *
- * All data structures have to be on the stack
- */
-#define CONFIG_SYS_NUM_DDR_CTLRS CONFIG_NUM_DDR_CONTROLLERS
-#define CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_DIMM_SLOTS_PER_CTLR
-
-typedef struct {
- generic_spd_eeprom_t
- spd_installed_dimms[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- struct dimm_params_s
- dimm_params[CONFIG_SYS_NUM_DDR_CTLRS][CONFIG_SYS_DIMM_SLOTS_PER_CTLR];
- memctl_options_t memctl_opts[CONFIG_SYS_NUM_DDR_CTLRS];
- common_timing_params_t common_timing_params[CONFIG_SYS_NUM_DDR_CTLRS];
- fsl_ddr_cfg_regs_t fsl_ddr_config_reg[CONFIG_SYS_NUM_DDR_CTLRS];
-} fsl_ddr_info_t;
-
-/* Compute steps */
-#define STEP_GET_SPD (1 << 0)
-#define STEP_COMPUTE_DIMM_PARMS (1 << 1)
-#define STEP_COMPUTE_COMMON_PARMS (1 << 2)
-#define STEP_GATHER_OPTS (1 << 3)
-#define STEP_ASSIGN_ADDRESSES (1 << 4)
-#define STEP_COMPUTE_REGS (1 << 5)
-#define STEP_PROGRAM_REGS (1 << 6)
-#define STEP_ALL 0xFFF
-
-extern unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step);
-
-extern const char * step_to_string(unsigned int step);
-
-extern unsigned int
-compute_fsl_memctl_config_regs(const memctl_options_t *popts,
- fsl_ddr_cfg_regs_t *ddr,
- const common_timing_params_t *common_dimm,
- const dimm_params_t *dimm_parameters,
- unsigned int dbw_capacity_adjust);
-extern unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms);
-extern unsigned int populate_memctl_options(int all_DIMMs_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-
-extern unsigned int mclk_to_picos(unsigned int mclk);
-extern unsigned int get_memory_clk_period_ps(void);
-extern unsigned int picos_to_mclk(unsigned int picos);
-
-#endif
diff --git a/cpu/mpc8xxx/ddr/ddr1_dimm_params.c b/cpu/mpc8xxx/ddr/ddr1_dimm_params.c
deleted file mode 100644
index 9184764..0000000
--- a/cpu/mpc8xxx/ddr/ddr1_dimm_params.c
+++ /dev/null
@@ -1,343 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- */
-
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 2 bits up to the top. */
- bsize = ((row_dens >> 2) | ((row_dens & 3) << 6));
- bsize <<= 24ULL;
- debug("DDR: DDR I rank density = 0x%08x\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * tCKmax from DDR I SPD Byte 43
- *
- * Bits 7:2 == whole ns
- * Bits 1:0 == quarter ns
- * 00 == 0.00 ns
- * 01 == 0.25 ns
- * 10 == 0.50 ns
- * 11 == 0.75 ns
- *
- * Returns picoseconds.
- */
-static unsigned int
-compute_tckmax_from_spd_ps(unsigned int byte43)
-{
- return (byte43 >> 2) * 1000 + (byte43 & 0x3) * 250;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can be.
- * If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-E
- * Table 11.
- *
- * ordinal 2, ddr1_speed_bins[1] contains tCK for CL=2
- */
- /* CL2.0 CL2.5 CL3.0 */
-unsigned short ddr1_speed_bins[] = {0, 7500, 6000, 5000 };
-
-unsigned int
-compute_derated_DDR1_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr1_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr1_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && lowest_tCKmin_found <= x && x <= mclk_ps) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 1;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR1 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr1_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR) {
- printf("DIMM %u: is not a DDR1 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr1_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = spd->nrows;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->bank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw_lsb;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /*
- * FIXME: Need to determine registered_dimm status.
- * 1 == register buffered
- * 0 == unbuffered
- */
- pdimm->registered_dimm = 0; /* unbuffered */
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->bank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tCKmin_X_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tCKmin_X_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tCKmin_X_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tCKmax_ps = compute_tckmax_from_spd_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_X should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_X = __ilog2(spd->cas_lat);
- pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X));
- pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X)
- & ~(1 << pdimm->caslat_X_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR1_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->tRCD_ps = spd->trcd * 250;
- pdimm->tRP_ps = spd->trp * 250;
- pdimm->tRAS_ps = spd->tras * 1000;
-
- pdimm->tWR_ps = mclk_to_picos(3);
- pdimm->tWTR_ps = mclk_to_picos(1);
- pdimm->tRFC_ps = compute_trfc_ps_from_spd(0, spd->trfc);
-
- pdimm->tRRD_ps = spd->trrd * 250;
- pdimm->tRC_ps = compute_trc_ps_from_spd(0, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tDS_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tDH_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->tRTP_ps = mclk_to_picos(2); /* By the book. */
- pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
- pdimm->tQHS_ps = spd->tqhs * 10;
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/ddr2_dimm_params.c b/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
deleted file mode 100644
index d9d0fa7..0000000
--- a/cpu/mpc8xxx/ddr/ddr2_dimm_params.c
+++ /dev/null
@@ -1,339 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * Study these table from Byte 31 of JEDEC SPD Spec.
- *
- * DDR I DDR II
- * Bit Size Size
- * --- ----- ------
- * 7 high 512MB 512MB
- * 6 256MB 256MB
- * 5 128MB 128MB
- * 4 64MB 16GB
- * 3 32MB 8GB
- * 2 16MB 4GB
- * 1 2GB 2GB
- * 0 low 1GB 1GB
- *
- * Reorder Table to be linear by stripping the bottom
- * 2 or 5 bits off and shifting them up to the top.
- *
- */
-static unsigned long long
-compute_ranksize(unsigned int mem_type, unsigned char row_dens)
-{
- unsigned long long bsize;
-
- /* Bottom 5 bits up to the top. */
- bsize = ((row_dens >> 5) | ((row_dens & 31) << 3));
- bsize <<= 27ULL;
- debug("DDR: DDR II rank density = 0x%08x\n", bsize);
-
- return bsize;
-}
-
-/*
- * Convert a two-nibble BCD value into a cycle time.
- * While the spec calls for nano-seconds, picos are returned.
- *
- * This implements the tables for bytes 9, 23 and 25 for both
- * DDR I and II. No allowance for distinguishing the invalid
- * fields absent for DDR I yet present in DDR II is made.
- * (That is, cycle times of .25, .33, .66 and .75 ns are
- * allowed for both DDR II and I.)
- */
-static unsigned int
-convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val)
-{
- /* Table look up the lower nibble, allow DDR I & II. */
- unsigned int tenths_ps[16] = {
- 0,
- 100,
- 200,
- 300,
- 400,
- 500,
- 600,
- 700,
- 800,
- 900,
- 250, /* This and the next 3 entries valid ... */
- 330, /* ... only for tCK calculations. */
- 660,
- 750,
- 0, /* undefined */
- 0 /* undefined */
- };
-
- unsigned int whole_ns = (spd_val & 0xF0) >> 4;
- unsigned int tenth_ns = spd_val & 0x0F;
- unsigned int ps = whole_ns * 1000 + tenths_ps[tenth_ns];
-
- return ps;
-}
-
-static unsigned int
-convert_bcd_hundredths_to_cycle_time_ps(unsigned int spd_val)
-{
- unsigned int tenth_ns = (spd_val & 0xF0) >> 4;
- unsigned int hundredth_ns = spd_val & 0x0F;
- unsigned int ps = tenth_ns * 100 + hundredth_ns * 10;
-
- return ps;
-}
-
-static unsigned int byte40_table_ps[8] = {
- 0,
- 250,
- 330,
- 500,
- 660,
- 750,
- 0, /* supposed to be RFC, but not sure what that means */
- 0 /* Undefined */
-};
-
-static unsigned int
-compute_trfc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trfc)
-{
- unsigned int trfc_ps;
-
- trfc_ps = (((trctrfc_ext & 0x1) * 256) + trfc) * 1000
- + byte40_table_ps[(trctrfc_ext >> 1) & 0x7];
-
- return trfc_ps;
-}
-
-static unsigned int
-compute_trc_ps_from_spd(unsigned char trctrfc_ext, unsigned char trc)
-{
- unsigned int trc_ps;
-
- trc_ps = trc * 1000 + byte40_table_ps[(trctrfc_ext >> 4) & 0x7];
-
- return trc_ps;
-}
-
-/*
- * Determine Refresh Rate. Ignore self refresh bit on DDR I.
- * Table from SPD Spec, Byte 12, converted to picoseconds and
- * filled in with "default" normal values.
- */
-static unsigned int
-determine_refresh_rate_ps(const unsigned int spd_refresh)
-{
- unsigned int refresh_time_ps[8] = {
- 15625000, /* 0 Normal 1.00x */
- 3900000, /* 1 Reduced .25x */
- 7800000, /* 2 Extended .50x */
- 31300000, /* 3 Extended 2.00x */
- 62500000, /* 4 Extended 4.00x */
- 125000000, /* 5 Extended 8.00x */
- 15625000, /* 6 Normal 1.00x filler */
- 15625000, /* 7 Normal 1.00x filler */
- };
-
- return refresh_time_ps[spd_refresh & 0x7];
-}
-
-/*
- * The purpose of this function is to compute a suitable
- * CAS latency given the DRAM clock period. The SPD only
- * defines at most 3 CAS latencies. Typically the slower in
- * frequency the DIMM runs at, the shorter its CAS latency can.
- * be. If the DIMM is operating at a sufficiently low frequency,
- * it may be able to run at a CAS latency shorter than the
- * shortest SPD-defined CAS latency.
- *
- * If a CAS latency is not found, 0 is returned.
- *
- * Do this by finding in the standard speed bin table the longest
- * tCKmin that doesn't exceed the value of mclk_ps (tCK).
- *
- * An assumption made is that the SDRAM device allows the
- * CL to be programmed for a value that is lower than those
- * advertised by the SPD. This is not always the case,
- * as those modes not defined in the SPD are optional.
- *
- * CAS latency de-rating based upon values JEDEC Standard No. 79-2C
- * Table 40, "DDR2 SDRAM stanadard speed bins and tCK, tRCD, tRP, tRAS,
- * and tRC for corresponding bin"
- *
- * ordinal 2, ddr2_speed_bins[1] contains tCK for CL=3
- * Not certain if any good value exists for CL=2
- */
- /* CL2 CL3 CL4 CL5 CL6 */
-unsigned short ddr2_speed_bins[] = { 0, 5000, 3750, 3000, 2500 };
-
-unsigned int
-compute_derated_DDR2_CAS_latency(unsigned int mclk_ps)
-{
- const unsigned int num_speed_bins = ARRAY_SIZE(ddr2_speed_bins);
- unsigned int lowest_tCKmin_found = 0;
- unsigned int lowest_tCKmin_CL = 0;
- unsigned int i;
-
- debug("mclk_ps = %u\n", mclk_ps);
-
- for (i = 0; i < num_speed_bins; i++) {
- unsigned int x = ddr2_speed_bins[i];
- debug("i=%u, x = %u, lowest_tCKmin_found = %u\n",
- i, x, lowest_tCKmin_found);
- if (x && x <= mclk_ps && x >= lowest_tCKmin_found ) {
- lowest_tCKmin_found = x;
- lowest_tCKmin_CL = i + 2;
- }
- }
-
- debug("lowest_tCKmin_CL = %u\n", lowest_tCKmin_CL);
-
- return lowest_tCKmin_CL;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR2 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- * FIXME: use #define for the retvals
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr2_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR2) {
- printf("DIMM %u: is not a DDR2 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr2_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = (spd->mod_ranks & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd->mem_type, spd->rank_dens);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->data_width = spd->dataw;
- pdimm->primary_sdram_width = spd->primw;
- pdimm->ec_sdram_width = spd->ecw;
-
- /* FIXME: what about registered SO-DIMM? */
- switch (spd->dimm_type) {
- case 0x01: /* RDIMM */
- case 0x10: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
- break;
-
- case 0x02: /* UDIMM */
- case 0x04: /* SO-DIMM */
- case 0x08: /* Micro-DIMM */
- case 0x20: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
- break;
-
- default:
- printf("unknown dimm_type 0x%02X\n", spd->dimm_type);
- return 1;
- break;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = spd->nrow_addr;
- pdimm->n_col_addr = spd->ncol_addr;
- pdimm->n_banks_per_sdram_device = spd->nbanks;
- pdimm->edc_config = spd->config;
- pdimm->burst_lengths_bitmask = spd->burstl;
- pdimm->row_density = spd->rank_dens;
-
- /*
- * Calculate the Maximum Data Rate based on the Minimum Cycle time.
- * The SPD clk_cycle field (tCKmin) is measured in tenths of
- * nanoseconds and represented as BCD.
- */
- pdimm->tCKmin_X_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle);
- pdimm->tCKmin_X_minus_1_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle2);
- pdimm->tCKmin_X_minus_2_ps
- = convert_bcd_tenths_to_cycle_time_ps(spd->clk_cycle3);
-
- pdimm->tCKmax_ps = convert_bcd_tenths_to_cycle_time_ps(spd->tckmax);
-
- /*
- * Compute CAS latencies defined by SPD
- * The SPD caslat_X should have at least 1 and at most 3 bits set.
- *
- * If cas_lat after masking is 0, the __ilog2 function returns
- * 255 into the variable. This behavior is abused once.
- */
- pdimm->caslat_X = __ilog2(spd->cas_lat);
- pdimm->caslat_X_minus_1 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X));
- pdimm->caslat_X_minus_2 = __ilog2(spd->cas_lat
- & ~(1 << pdimm->caslat_X)
- & ~(1 << pdimm->caslat_X_minus_1));
-
- /* Compute CAS latencies below that defined by SPD */
- pdimm->caslat_lowest_derated
- = compute_derated_DDR2_CAS_latency(get_memory_clk_period_ps());
-
- /* Compute timing parameters */
- pdimm->tRCD_ps = spd->trcd * 250;
- pdimm->tRP_ps = spd->trp * 250;
- pdimm->tRAS_ps = spd->tras * 1000;
-
- pdimm->tWR_ps = spd->twr * 250;
- pdimm->tWTR_ps = spd->twtr * 250;
- pdimm->tRFC_ps = compute_trfc_ps_from_spd(spd->trctrfc_ext, spd->trfc);
-
- pdimm->tRRD_ps = spd->trrd * 250;
- pdimm->tRC_ps = compute_trc_ps_from_spd(spd->trctrfc_ext, spd->trc);
-
- pdimm->refresh_rate_ps = determine_refresh_rate_ps(spd->refresh);
-
- pdimm->tIS_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_setup);
- pdimm->tIH_ps = convert_bcd_hundredths_to_cycle_time_ps(spd->ca_hold);
- pdimm->tDS_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_setup);
- pdimm->tDH_ps
- = convert_bcd_hundredths_to_cycle_time_ps(spd->data_hold);
-
- pdimm->tRTP_ps = spd->trtp * 250;
- pdimm->tDQSQ_max_ps = spd->tdqsq * 10;
- pdimm->tQHS_ps = spd->tqhs * 10;
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
deleted file mode 100644
index d4199ba..0000000
--- a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c
+++ /dev/null
@@ -1,314 +0,0 @@
-/*
- * Copyright 2008-2009 Freescale Semiconductor, Inc.
- * Dave Liu <daveliu@freescale.com>
- *
- * calculate the organization and timing parameter
- * from ddr3 spd, please refer to the spec
- * JEDEC standard No.21-C 4_01_02_11R18.pdf
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/*
- * Calculate the Density of each Physical Rank.
- * Returned size is in bytes.
- *
- * each rank size =
- * sdram capacity(bit) / 8 * primary bus width / sdram width
- *
- * where: sdram capacity = spd byte4[3:0]
- * primary bus width = spd byte8[2:0]
- * sdram width = spd byte7[2:0]
- *
- * SPD byte4 - sdram density and banks
- * bit[3:0] size(bit) size(byte)
- * 0000 256Mb 32MB
- * 0001 512Mb 64MB
- * 0010 1Gb 128MB
- * 0011 2Gb 256MB
- * 0100 4Gb 512MB
- * 0101 8Gb 1GB
- * 0110 16Gb 2GB
- *
- * SPD byte8 - module memory bus width
- * bit[2:0] primary bus width
- * 000 8bits
- * 001 16bits
- * 010 32bits
- * 011 64bits
- *
- * SPD byte7 - module organiztion
- * bit[2:0] sdram device width
- * 000 4bits
- * 001 8bits
- * 010 16bits
- * 011 32bits
- *
- */
-static unsigned long long
-compute_ranksize(const ddr3_spd_eeprom_t *spd)
-{
- unsigned long long bsize;
-
- int nbit_sdram_cap_bsize = 0;
- int nbit_primary_bus_width = 0;
- int nbit_sdram_width = 0;
-
- if ((spd->density_banks & 0xf) < 7)
- nbit_sdram_cap_bsize = (spd->density_banks & 0xf) + 28;
- if ((spd->bus_width & 0x7) < 4)
- nbit_primary_bus_width = (spd->bus_width & 0x7) + 3;
- if ((spd->organization & 0x7) < 4)
- nbit_sdram_width = (spd->organization & 0x7) + 2;
-
- bsize = 1ULL << (nbit_sdram_cap_bsize - 3
- + nbit_primary_bus_width - nbit_sdram_width);
-
- debug("DDR: DDR III rank density = 0x%16lx\n", bsize);
-
- return bsize;
-}
-
-/*
- * ddr_compute_dimm_parameters for DDR3 SPD
- *
- * Compute DIMM parameters based upon the SPD information in spd.
- * Writes the results to the dimm_params_t structure pointed by pdimm.
- *
- */
-unsigned int
-ddr_compute_dimm_parameters(const ddr3_spd_eeprom_t *spd,
- dimm_params_t *pdimm,
- unsigned int dimm_number)
-{
- unsigned int retval;
- unsigned int mtb_ps;
-
- if (spd->mem_type) {
- if (spd->mem_type != SPD_MEMTYPE_DDR3) {
- printf("DIMM %u: is not a DDR3 SPD.\n", dimm_number);
- return 1;
- }
- } else {
- memset(pdimm, 0, sizeof(dimm_params_t));
- return 1;
- }
-
- retval = ddr3_spd_check(spd);
- if (retval) {
- printf("DIMM %u: failed checksum\n", dimm_number);
- return 2;
- }
-
- /*
- * The part name in ASCII in the SPD EEPROM is not null terminated.
- * Guarantee null termination here by presetting all bytes to 0
- * and copying the part name in ASCII from the SPD onto it
- */
- memset(pdimm->mpart, 0, sizeof(pdimm->mpart));
- memcpy(pdimm->mpart, spd->mpart, sizeof(pdimm->mpart) - 1);
-
- /* DIMM organization parameters */
- pdimm->n_ranks = ((spd->organization >> 3) & 0x7) + 1;
- pdimm->rank_density = compute_ranksize(spd);
- pdimm->capacity = pdimm->n_ranks * pdimm->rank_density;
- pdimm->primary_sdram_width = 1 << (3 + (spd->bus_width & 0x7));
- if ((spd->bus_width >> 3) & 0x3)
- pdimm->ec_sdram_width = 8;
- else
- pdimm->ec_sdram_width = 0;
- pdimm->data_width = pdimm->primary_sdram_width
- + pdimm->ec_sdram_width;
-
- switch (spd->module_type & 0xf) {
- case 0x01: /* RDIMM */
- case 0x05: /* Mini-RDIMM */
- pdimm->registered_dimm = 1; /* register buffered */
- break;
-
- case 0x02: /* UDIMM */
- case 0x03: /* SO-DIMM */
- case 0x04: /* Micro-DIMM */
- case 0x06: /* Mini-UDIMM */
- pdimm->registered_dimm = 0; /* unbuffered */
- break;
-
- default:
- printf("unknown dimm_type 0x%02X\n", spd->module_type);
- return 1;
- }
-
- /* SDRAM device parameters */
- pdimm->n_row_addr = ((spd->addressing >> 3) & 0x7) + 12;
- pdimm->n_col_addr = (spd->addressing & 0x7) + 9;
- pdimm->n_banks_per_sdram_device = 8 << ((spd->density_banks >> 4) & 0x7);
-
- /*
- * The SPD spec has not the ECC bit,
- * We consider the DIMM as ECC capability
- * when the extension bus exist
- */
- if (pdimm->ec_sdram_width)
- pdimm->edc_config = 0x02;
- else
- pdimm->edc_config = 0x00;
-
- /*
- * The SPD spec has not the burst length byte
- * but DDR3 spec has nature BL8 and BC4,
- * BL8 -bit3, BC4 -bit2
- */
- pdimm->burst_lengths_bitmask = 0x0c;
- pdimm->row_density = __ilog2(pdimm->rank_density);
-
- /* MTB - medium timebase
- * The unit in the SPD spec is ns,
- * We convert it to ps.
- * eg: MTB = 0.125ns (125ps)
- */
- mtb_ps = (spd->mtb_dividend * 1000) /spd->mtb_divisor;
- pdimm->mtb_ps = mtb_ps;
-
- /*
- * sdram minimum cycle time
- * we assume the MTB is 0.125ns
- * eg:
- * tCK_min=15 MTB (1.875ns) ->DDR3-1066
- * =12 MTB (1.5ns) ->DDR3-1333
- * =10 MTB (1.25ns) ->DDR3-1600
- */
- pdimm->tCKmin_X_ps = spd->tCK_min * mtb_ps;
-
- /*
- * CAS latency supported
- * bit4 - CL4
- * bit5 - CL5
- * bit18 - CL18
- */
- pdimm->caslat_X = ((spd->caslat_msb << 8) | spd->caslat_lsb) << 4;
-
- /*
- * min CAS latency time
- * eg: tAA_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->tAA_ps = spd->tAA_min * mtb_ps;
-
- /*
- * min write recovery time
- * eg:
- * tWR_min = 120 MTB (15ns) -> all speed grades.
- */
- pdimm->tWR_ps = spd->tWR_min * mtb_ps;
-
- /*
- * min RAS to CAS delay time
- * eg: tRCD_min =
- * DDR3-800 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25)
- */
- pdimm->tRCD_ps = spd->tRCD_min * mtb_ps;
-
- /*
- * min row active to row active delay time
- * eg: tRRD_min =
- * DDR3-800(1KB page) 80 MTB (10ns)
- * DDR3-1333(1KB page) 48 MTB (6ns)
- */
- pdimm->tRRD_ps = spd->tRRD_min * mtb_ps;
-
- /*
- * min row precharge delay time
- * eg: tRP_min =
- * DDR3-800D 100 MTB (12.5ns)
- * DDR3-1066F 105 MTB (13.125ns)
- * DDR3-1333H 108 MTB (13.5ns)
- * DDR3-1600H 90 MTB (11.25ns)
- */
- pdimm->tRP_ps = spd->tRP_min * mtb_ps;
-
- /* min active to precharge delay time
- * eg: tRAS_min =
- * DDR3-800D 300 MTB (37.5ns)
- * DDR3-1066F 300 MTB (37.5ns)
- * DDR3-1333H 288 MTB (36ns)
- * DDR3-1600H 280 MTB (35ns)
- */
- pdimm->tRAS_ps = (((spd->tRAS_tRC_ext & 0xf) << 8) | spd->tRAS_min_lsb)
- * mtb_ps;
- /*
- * min active to actice/refresh delay time
- * eg: tRC_min =
- * DDR3-800D 400 MTB (50ns)
- * DDR3-1066F 405 MTB (50.625ns)
- * DDR3-1333H 396 MTB (49.5ns)
- * DDR3-1600H 370 MTB (46.25ns)
- */
- pdimm->tRC_ps = (((spd->tRAS_tRC_ext & 0xf0) << 4) | spd->tRC_min_lsb)
- * mtb_ps;
- /*
- * min refresh recovery delay time
- * eg: tRFC_min =
- * 512Mb 720 MTB (90ns)
- * 1Gb 880 MTB (110ns)
- * 2Gb 1280 MTB (160ns)
- */
- pdimm->tRFC_ps = ((spd->tRFC_min_msb << 8) | spd->tRFC_min_lsb)
- * mtb_ps;
- /*
- * min internal write to read command delay time
- * eg: tWTR_min = 40 MTB (7.5ns) - all speed bins.
- * tWRT is at least 4 mclk independent of operating freq.
- */
- pdimm->tWTR_ps = spd->tWTR_min * mtb_ps;
-
- /*
- * min internal read to precharge command delay time
- * eg: tRTP_min = 40 MTB (7.5ns) - all speed bins.
- * tRTP is at least 4 mclk independent of operating freq.
- */
- pdimm->tRTP_ps = spd->tRTP_min * mtb_ps;
-
- /*
- * Average periodic refresh interval
- * tREFI = 7.8 us at normal temperature range
- * = 3.9 us at ext temperature range
- */
- pdimm->refresh_rate_ps = 7800000;
-
- /*
- * min four active window delay time
- * eg: tFAW_min =
- * DDR3-800(1KB page) 320 MTB (40ns)
- * DDR3-1066(1KB page) 300 MTB (37.5ns)
- * DDR3-1333(1KB page) 240 MTB (30ns)
- * DDR3-1600(1KB page) 240 MTB (30ns)
- */
- pdimm->tFAW_ps = (((spd->tFAW_msb & 0xf) << 8) | spd->tFAW_min)
- * mtb_ps;
-
- /*
- * We need check the address mirror for unbuffered DIMM
- * If SPD indicate the address map mirror, The DDR controller
- * need care it.
- */
- if ((spd->module_type == SPD_MODULETYPE_UDIMM) ||
- (spd->module_type == SPD_MODULETYPE_SODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MICRODIMM) ||
- (spd->module_type == SPD_MODULETYPE_MINIUDIMM))
- pdimm->mirrored_dimm = spd->mod_section.unbuffered.addr_mapping & 0x1;
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
deleted file mode 100644
index e888e3e..0000000
--- a/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-unsigned int
-compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
- unsigned int tAAmin_ps = 0;
- unsigned int tCKmin_X_ps = 0;
- unsigned int common_caslat;
- unsigned int caslat_actual;
- unsigned int retry = 16;
- unsigned int tmp;
- const unsigned int mclk_ps = get_memory_clk_period_ps();
-
- /* compute the common CAS latency supported between slots */
- tmp = dimm_params[0].caslat_X;
- for (i = 1; i < number_of_dimms; i++)
- tmp &= dimm_params[i].caslat_X;
- common_caslat = tmp;
-
- /* compute the max tAAmin tCKmin between slots */
- for (i = 0; i < number_of_dimms; i++) {
- tAAmin_ps = max(tAAmin_ps, dimm_params[i].tAA_ps);
- tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
- }
- /* validate if the memory clk is in the range of dimms */
- if (mclk_ps < tCKmin_X_ps) {
- printf("The DIMM max tCKmin is %d ps,"
- "doesn't support the MCLK cycle %d ps\n",
- tCKmin_X_ps, mclk_ps);
- return 1;
- }
- /* determine the acutal cas latency */
- caslat_actual = (tAAmin_ps + mclk_ps - 1) / mclk_ps;
- /* check if the dimms support the CAS latency */
- while (!(common_caslat & (1 << caslat_actual)) && retry > 0) {
- caslat_actual++;
- retry--;
- }
- /* once the caculation of caslat_actual is completed
- * we must verify that this CAS latency value does not
- * exceed tAAmax, which is 20 ns for all DDR3 speed grades
- */
- if (caslat_actual * mclk_ps > 20000) {
- printf("The choosen cas latency %d is too large\n",
- caslat_actual);
- return 1;
- }
- outpdimm->lowest_common_SPD_caslat = caslat_actual;
-
- return 0;
-}
-
-/*
- * compute_lowest_common_dimm_parameters()
- *
- * Determine the worst-case DIMM timing parameters from the set of DIMMs
- * whose parameters have been computed into the array pointed to
- * by dimm_params.
- */
-unsigned int
-compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
- common_timing_params_t *outpdimm,
- unsigned int number_of_dimms)
-{
- unsigned int i;
-
- unsigned int tCKmin_X_ps = 0;
- unsigned int tCKmax_ps = 0xFFFFFFFF;
- unsigned int tCKmax_max_ps = 0;
- unsigned int tRCD_ps = 0;
- unsigned int tRP_ps = 0;
- unsigned int tRAS_ps = 0;
- unsigned int tWR_ps = 0;
- unsigned int tWTR_ps = 0;
- unsigned int tRFC_ps = 0;
- unsigned int tRRD_ps = 0;
- unsigned int tRC_ps = 0;
- unsigned int refresh_rate_ps = 0;
- unsigned int tIS_ps = 0;
- unsigned int tIH_ps = 0;
- unsigned int tDS_ps = 0;
- unsigned int tDH_ps = 0;
- unsigned int tRTP_ps = 0;
- unsigned int tDQSQ_max_ps = 0;
- unsigned int tQHS_ps = 0;
-
- unsigned int temp1, temp2;
- unsigned int additive_latency = 0;
-#if !defined(CONFIG_FSL_DDR3)
- const unsigned int mclk_ps = get_memory_clk_period_ps();
- unsigned int lowest_good_caslat;
- unsigned int not_ok;
-
- debug("using mclk_ps = %u\n", mclk_ps);
-#endif
-
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- /*
- * If there are no ranks on this DIMM,
- * it probably doesn't exist, so skip it.
- */
- if (dimm_params[i].n_ranks == 0) {
- temp1++;
- continue;
- }
-
- /*
- * Find minimum tCKmax_ps to find fastest slow speed,
- * i.e., this is the slowest the whole system can go.
- */
- tCKmax_ps = min(tCKmax_ps, dimm_params[i].tCKmax_ps);
-
- /* Either find maximum value to determine slowest
- * speed, delay, time, period, etc */
- tCKmin_X_ps = max(tCKmin_X_ps, dimm_params[i].tCKmin_X_ps);
- tCKmax_max_ps = max(tCKmax_max_ps, dimm_params[i].tCKmax_ps);
- tRCD_ps = max(tRCD_ps, dimm_params[i].tRCD_ps);
- tRP_ps = max(tRP_ps, dimm_params[i].tRP_ps);
- tRAS_ps = max(tRAS_ps, dimm_params[i].tRAS_ps);
- tWR_ps = max(tWR_ps, dimm_params[i].tWR_ps);
- tWTR_ps = max(tWTR_ps, dimm_params[i].tWTR_ps);
- tRFC_ps = max(tRFC_ps, dimm_params[i].tRFC_ps);
- tRRD_ps = max(tRRD_ps, dimm_params[i].tRRD_ps);
- tRC_ps = max(tRC_ps, dimm_params[i].tRC_ps);
- tIS_ps = max(tIS_ps, dimm_params[i].tIS_ps);
- tIH_ps = max(tIH_ps, dimm_params[i].tIH_ps);
- tDS_ps = max(tDS_ps, dimm_params[i].tDS_ps);
- tDH_ps = max(tDH_ps, dimm_params[i].tDH_ps);
- tRTP_ps = max(tRTP_ps, dimm_params[i].tRTP_ps);
- tQHS_ps = max(tQHS_ps, dimm_params[i].tQHS_ps);
- refresh_rate_ps = max(refresh_rate_ps,
- dimm_params[i].refresh_rate_ps);
-
- /*
- * Find maximum tDQSQ_max_ps to find slowest.
- *
- * FIXME: is finding the slowest value the correct
- * strategy for this parameter?
- */
- tDQSQ_max_ps = max(tDQSQ_max_ps, dimm_params[i].tDQSQ_max_ps);
- }
-
- outpdimm->ndimms_present = number_of_dimms - temp1;
-
- if (temp1 == number_of_dimms) {
- debug("no dimms this memory controller\n");
- return 0;
- }
-
- outpdimm->tCKmin_X_ps = tCKmin_X_ps;
- outpdimm->tCKmax_ps = tCKmax_ps;
- outpdimm->tCKmax_max_ps = tCKmax_max_ps;
- outpdimm->tRCD_ps = tRCD_ps;
- outpdimm->tRP_ps = tRP_ps;
- outpdimm->tRAS_ps = tRAS_ps;
- outpdimm->tWR_ps = tWR_ps;
- outpdimm->tWTR_ps = tWTR_ps;
- outpdimm->tRFC_ps = tRFC_ps;
- outpdimm->tRRD_ps = tRRD_ps;
- outpdimm->tRC_ps = tRC_ps;
- outpdimm->refresh_rate_ps = refresh_rate_ps;
- outpdimm->tIS_ps = tIS_ps;
- outpdimm->tIH_ps = tIH_ps;
- outpdimm->tDS_ps = tDS_ps;
- outpdimm->tDH_ps = tDH_ps;
- outpdimm->tRTP_ps = tRTP_ps;
- outpdimm->tDQSQ_max_ps = tDQSQ_max_ps;
- outpdimm->tQHS_ps = tQHS_ps;
-
- /* Determine common burst length for all DIMMs. */
- temp1 = 0xff;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp1 &= dimm_params[i].burst_lengths_bitmask;
- }
- }
- outpdimm->all_DIMMs_burst_lengths_bitmask = temp1;
-
- /* Determine if all DIMMs registered buffered. */
- temp1 = temp2 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- if (dimm_params[i].registered_dimm)
- temp1 = 1;
- if (!dimm_params[i].registered_dimm)
- temp2 = 1;
- }
- }
-
- outpdimm->all_DIMMs_registered = 0;
- if (temp1 && !temp2) {
- outpdimm->all_DIMMs_registered = 1;
- }
-
- outpdimm->all_DIMMs_unbuffered = 0;
- if (!temp1 && temp2) {
- outpdimm->all_DIMMs_unbuffered = 1;
- }
-
- /* CHECKME: */
- if (!outpdimm->all_DIMMs_registered
- && !outpdimm->all_DIMMs_unbuffered) {
- printf("ERROR: Mix of registered buffered and unbuffered "
- "DIMMs detected!\n");
- }
-
-#if defined(CONFIG_FSL_DDR3)
- if (compute_cas_latency_ddr3(dimm_params, outpdimm, number_of_dimms))
- return 1;
-#else
- /*
- * Compute a CAS latency suitable for all DIMMs
- *
- * Strategy for SPD-defined latencies: compute only
- * CAS latency defined by all DIMMs.
- */
-
- /*
- * Step 1: find CAS latency common to all DIMMs using bitwise
- * operation.
- */
- temp1 = 0xFF;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks) {
- temp2 = 0;
- temp2 |= 1 << dimm_params[i].caslat_X;
- temp2 |= 1 << dimm_params[i].caslat_X_minus_1;
- temp2 |= 1 << dimm_params[i].caslat_X_minus_2;
- /*
- * FIXME: If there was no entry for X-2 (X-1) in
- * the SPD, then caslat_X_minus_2
- * (caslat_X_minus_1) contains either 255 or
- * 0xFFFFFFFF because that's what the glorious
- * __ilog2 function returns for an input of 0.
- * On 32-bit PowerPC, left shift counts with bit
- * 26 set (that the value of 255 or 0xFFFFFFFF
- * will have), cause the destination register to
- * be 0. That is why this works.
- */
- temp1 &= temp2;
- }
- }
-
- /*
- * Step 2: check each common CAS latency against tCK of each
- * DIMM's SPD.
- */
- lowest_good_caslat = 0;
- temp2 = 0;
- while (temp1) {
- not_ok = 0;
- temp2 = __ilog2(temp1);
- debug("checking common caslat = %u\n", temp2);
-
- /* Check if this CAS latency will work on all DIMMs at tCK. */
- for (i = 0; i < number_of_dimms; i++) {
- if (!dimm_params[i].n_ranks) {
- continue;
- }
- if (dimm_params[i].caslat_X == temp2) {
- if (mclk_ps >= dimm_params[i].tCKmin_X_ps) {
- debug("CL = %u ok on DIMM %u at tCK=%u"
- " ps with its tCKmin_X_ps of %u\n",
- temp2, i, mclk_ps,
- dimm_params[i].tCKmin_X_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_X_minus_1 == temp2) {
- unsigned int tCKmin_X_minus_1_ps
- = dimm_params[i].tCKmin_X_minus_1_ps;
- if (mclk_ps >= tCKmin_X_minus_1_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tCKmin_X_minus_1_ps of %u\n",
- temp2, i, mclk_ps,
- tCKmin_X_minus_1_ps);
- continue;
- } else {
- not_ok++;
- }
- }
-
- if (dimm_params[i].caslat_X_minus_2 == temp2) {
- unsigned int tCKmin_X_minus_2_ps
- = dimm_params[i].tCKmin_X_minus_2_ps;
- if (mclk_ps >= tCKmin_X_minus_2_ps) {
- debug("CL = %u ok on DIMM %u at "
- "tCK=%u ps with its "
- "tCKmin_X_minus_2_ps of %u\n",
- temp2, i, mclk_ps,
- tCKmin_X_minus_2_ps);
- continue;
- } else {
- not_ok++;
- }
- }
- }
-
- if (!not_ok) {
- lowest_good_caslat = temp2;
- }
-
- temp1 &= ~(1 << temp2);
- }
-
- debug("lowest common SPD-defined CAS latency = %u\n",
- lowest_good_caslat);
- outpdimm->lowest_common_SPD_caslat = lowest_good_caslat;
-
-
- /*
- * Compute a common 'de-rated' CAS latency.
- *
- * The strategy here is to find the *highest* dereated cas latency
- * with the assumption that all of the DIMMs will support a dereated
- * CAS latency higher than or equal to their lowest dereated value.
- */
- temp1 = 0;
- for (i = 0; i < number_of_dimms; i++) {
- temp1 = max(temp1, dimm_params[i].caslat_lowest_derated);
- }
- outpdimm->highest_common_derated_caslat = temp1;
- debug("highest common dereated CAS latency = %u\n", temp1);
-#endif /* #if defined(CONFIG_FSL_DDR3) */
-
- /* Determine if all DIMMs ECC capable. */
- temp1 = 1;
- for (i = 0; i < number_of_dimms; i++) {
- if (dimm_params[i].n_ranks && dimm_params[i].edc_config != 2) {
- temp1 = 0;
- break;
- }
- }
- if (temp1) {
- debug("all DIMMs ECC capable\n");
- } else {
- debug("Warning: not all DIMMs ECC capable, cant enable ECC\n");
- }
- outpdimm->all_DIMMs_ECC_capable = temp1;
-
-#ifndef CONFIG_FSL_DDR3
- /* FIXME: move to somewhere else to validate. */
- if (mclk_ps > tCKmax_max_ps) {
- printf("Warning: some of the installed DIMMs "
- "can not operate this slowly.\n");
- return 1;
- }
-#endif
- /*
- * Compute additive latency.
- *
- * For DDR1, additive latency should be 0.
- *
- * For DDR2, with ODT enabled, use "a value" less than ACTTORW,
- * which comes from Trcd, and also note that:
- * add_lat + caslat must be >= 4
- *
- * For DDR3, we use the AL=0
- *
- * When to use additive latency for DDR2:
- *
- * I. Because you are using CL=3 and need to do ODT on writes and
- * want functionality.
- * 1. Are you going to use ODT? (Does your board not have
- * additional termination circuitry for DQ, DQS, DQS_,
- * DM, RDQS, RDQS_ for x4/x8 configs?)
- * 2. If so, is your lowest supported CL going to be 3?
- * 3. If so, then you must set AL=1 because
- *
- * WL >= 3 for ODT on writes
- * RL = AL + CL
- * WL = RL - 1
- * ->
- * WL = AL + CL - 1
- * AL + CL - 1 >= 3
- * AL + CL >= 4
- * QED
- *
- * RL >= 3 for ODT on reads
- * RL = AL + CL
- *
- * Since CL aren't usually less than 2, AL=0 is a minimum,
- * so the WL-derived AL should be the -- FIXME?
- *
- * II. Because you are using auto-precharge globally and want to
- * use additive latency (posted CAS) to get more bandwidth.
- * 1. Are you going to use auto-precharge mode globally?
- *
- * Use addtivie latency and compute AL to be 1 cycle less than
- * tRCD, i.e. the READ or WRITE command is in the cycle
- * immediately following the ACTIVATE command..
- *
- * III. Because you feel like it or want to do some sort of
- * degraded-performance experiment.
- * 1. Do you just want to use additive latency because you feel
- * like it?
- *
- * Validation: AL is less than tRCD, and within the other
- * read-to-precharge constraints.
- */
-
- additive_latency = 0;
-
-#if defined(CONFIG_FSL_DDR2)
- if (lowest_good_caslat < 4) {
- additive_latency = picos_to_mclk(tRCD_ps) - lowest_good_caslat;
- if (mclk_to_picos(additive_latency) > tRCD_ps) {
- additive_latency = picos_to_mclk(tRCD_ps);
- debug("setting additive_latency to %u because it was "
- " greater than tRCD_ps\n", additive_latency);
- }
- }
-
-#elif defined(CONFIG_FSL_DDR3)
- /*
- * The system will not use the global auto-precharge mode.
- * However, it uses the page mode, so we set AL=0
- */
- additive_latency = 0;
-#endif
-
- /*
- * Validate additive latency
- * FIXME: move to somewhere else to validate
- *
- * AL <= tRCD(min)
- */
- if (mclk_to_picos(additive_latency) > tRCD_ps) {
- printf("Error: invalid additive latency exceeds tRCD(min).\n");
- return 1;
- }
-
- /*
- * RL = CL + AL; RL >= 3 for ODT_RD_CFG to be enabled
- * WL = RL - 1; WL >= 3 for ODT_WL_CFG to be enabled
- * ADD_LAT (the register) must be set to a value less
- * than ACTTORW if WL = 1, then AL must be set to 1
- * RD_TO_PRE (the register) must be set to a minimum
- * tRTP + AL if AL is nonzero
- */
-
- /*
- * Additive latency will be applied only if the memctl option to
- * use it.
- */
- outpdimm->additive_latency = additive_latency;
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/main.c b/cpu/mpc8xxx/ddr/main.c
deleted file mode 100644
index faa1af9..0000000
--- a/cpu/mpc8xxx/ddr/main.c
+++ /dev/null
@@ -1,479 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-/*
- * Generic driver for Freescale DDR/DDR2/DDR3 memory controller.
- * Based on code from spd_sdram.c
- * Author: James Yang [at freescale.com]
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-extern void fsl_ddr_set_lawbar(
- const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-/* processor specific function */
-extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
- unsigned int ctrl_num);
-
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_get_spd(generic_spd_eeprom_t *ctrl_dimms_spd,
- unsigned int ctrl_num);
-
-/*
- * ASSUMPTIONS:
- * - Same number of CONFIG_DIMM_SLOTS_PER_CTLR on each controller
- * - Same memory data bus width on all controllers
- *
- * NOTES:
- *
- * The memory controller and associated documentation use confusing
- * terminology when referring to the orgranization of DRAM.
- *
- * Here is a terminology translation table:
- *
- * memory controller/documention |industry |this code |signals
- * -------------------------------|-----------|-----------|-----------------
- * physical bank/bank |rank |rank |chip select (CS)
- * logical bank/sub-bank |bank |bank |bank address (BA)
- * page/row |row |page |row address
- * ??? |column |column |column address
- *
- * The naming confusion is further exacerbated by the descriptions of the
- * memory controller interleaving feature, where accesses are interleaved
- * _BETWEEN_ two seperate memory controllers. This is configured only in
- * CS0_CONFIG[INTLV_CTL] of each memory controller.
- *
- * memory controller documentation | number of chip selects
- * | per memory controller supported
- * --------------------------------|-----------------------------------------
- * cache line interleaving | 1 (CS0 only)
- * page interleaving | 1 (CS0 only)
- * bank interleaving | 1 (CS0 only)
- * superbank interleraving | depends on bank (chip select)
- * | interleraving [rank interleaving]
- * | mode used on every memory controller
- *
- * Even further confusing is the existence of the interleaving feature
- * _WITHIN_ each memory controller. The feature is referred to in
- * documentation as chip select interleaving or bank interleaving,
- * although it is configured in the DDR_SDRAM_CFG field.
- *
- * Name of field | documentation name | this code
- * -----------------------------|-----------------------|------------------
- * DDR_SDRAM_CFG[BA_INTLV_CTL] | Bank (chip select) | rank interleaving
- * | interleaving
- */
-
-#ifdef DEBUG
-const char *step_string_tbl[] = {
- "STEP_GET_SPD",
- "STEP_COMPUTE_DIMM_PARMS",
- "STEP_COMPUTE_COMMON_PARMS",
- "STEP_GATHER_OPTS",
- "STEP_ASSIGN_ADDRESSES",
- "STEP_COMPUTE_REGS",
- "STEP_PROGRAM_REGS",
- "STEP_ALL"
-};
-
-const char * step_to_string(unsigned int step) {
-
- unsigned int s = __ilog2(step);
-
- if ((1 << s) != step)
- return step_string_tbl[7];
-
- return step_string_tbl[s];
-}
-#endif
-
-int step_assign_addresses(fsl_ddr_info_t *pinfo,
- unsigned int dbw_cap_adj[],
- unsigned int *memctl_interleaving,
- unsigned int *rank_interleaving)
-{
- int i, j;
-
- /*
- * If a reduced data width is requested, but the SPD
- * specifies a physically wider device, adjust the
- * computed dimm capacities accordingly before
- * assigning addresses.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- unsigned int found = 0;
-
- switch (pinfo->memctl_opts[i].data_bus_width) {
- case 2:
- /* 16-bit */
- printf("can't handle 16-bit mode yet\n");
- break;
-
- case 1:
- /* 32-bit */
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int dw;
- dw = pinfo->dimm_params[i][j].data_width;
- if (pinfo->dimm_params[i][j].n_ranks
- && (dw == 72 || dw == 64)) {
- /*
- * FIXME: can't really do it
- * like this because this just
- * further reduces the memory
- */
- found = 1;
- break;
- }
- }
- if (found) {
- dbw_cap_adj[i] = 1;
- }
- break;
-
- case 0:
- /* 64-bit */
- break;
-
- default:
- printf("unexpected data bus width "
- "specified controller %u\n", i);
- return 1;
- }
- }
-
- /*
- * Check if all controllers are configured for memory
- * controller interleaving.
- */
- j = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (pinfo->memctl_opts[i].memctl_interleaving) {
- j++;
- }
- }
- if (j == 2)
- *memctl_interleaving = 1;
-
- /* Check that all controllers are rank interleaving. */
- j = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (pinfo->memctl_opts[i].ba_intlv_ctl) {
- j++;
- }
- }
- if (j == 2)
- *rank_interleaving = 1;
-
- if (*memctl_interleaving) {
- unsigned long long addr, total_mem_per_ctlr = 0;
- /*
- * If interleaving between memory controllers,
- * make each controller start at a base address
- * of 0.
- *
- * Also, if bank interleaving (chip select
- * interleaving) is enabled on each memory
- * controller, CS0 needs to be programmed to
- * cover the entire memory range on that memory
- * controller
- *
- * Bank interleaving also implies that each
- * addressed chip select is identical in size.
- */
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- addr = 0;
- pinfo->common_timing_params[i].base_address = 0ull;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned long long cap
- = pinfo->dimm_params[i][j].capacity;
-
- pinfo->dimm_params[i][j].base_address = addr;
- addr += cap >> dbw_cap_adj[i];
- total_mem_per_ctlr += cap >> dbw_cap_adj[i];
- }
- }
- pinfo->common_timing_params[0].total_mem = total_mem_per_ctlr;
- } else {
- /*
- * Simple linear assignment if memory
- * controllers are not interleaved.
- */
- unsigned long long cur_memsize = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- u64 total_mem_per_ctlr = 0;
- pinfo->common_timing_params[i].base_address =
- cur_memsize;
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- /* Compute DIMM base addresses. */
- unsigned long long cap =
- pinfo->dimm_params[i][j].capacity;
- pinfo->dimm_params[i][j].base_address =
- cur_memsize;
- cur_memsize += cap >> dbw_cap_adj[i];
- total_mem_per_ctlr += cap >> dbw_cap_adj[i];
- }
- pinfo->common_timing_params[i].total_mem =
- total_mem_per_ctlr;
- }
- }
-
- return 0;
-}
-
-unsigned long long
-fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step)
-{
- unsigned int i, j;
- unsigned int all_controllers_memctl_interleaving = 0;
- unsigned int all_controllers_rank_interleaving = 0;
- unsigned long long total_mem = 0;
-
- fsl_ddr_cfg_regs_t *ddr_reg = pinfo->fsl_ddr_config_reg;
- common_timing_params_t *timing_params = pinfo->common_timing_params;
-
- /* data bus width capacity adjust shift amount */
- unsigned int dbw_capacity_adjust[CONFIG_NUM_DDR_CONTROLLERS];
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- dbw_capacity_adjust[i] = 0;
- }
-
- debug("starting at step %u (%s)\n",
- start_step, step_to_string(start_step));
-
- switch (start_step) {
- case STEP_GET_SPD:
- /* STEP 1: Gather all DIMM SPD data */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_get_spd(pinfo->spd_installed_dimms[i], i);
- }
-
- case STEP_COMPUTE_DIMM_PARMS:
- /* STEP 2: Compute DIMM parameters from SPD data */
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
- unsigned int retval;
- generic_spd_eeprom_t *spd =
- &(pinfo->spd_installed_dimms[i][j]);
- dimm_params_t *pdimm =
- &(pinfo->dimm_params[i][j]);
-
- retval = compute_dimm_parameters(spd, pdimm, i);
- if (retval == 2) {
- printf("Error: compute_dimm_parameters"
- " non-zero returned FATAL value "
- "for memctl=%u dimm=%u\n", i, j);
- return 0;
- }
- if (retval) {
- debug("Warning: compute_dimm_parameters"
- " non-zero return value for memctl=%u "
- "dimm=%u\n", i, j);
- }
- }
- }
-
- case STEP_COMPUTE_COMMON_PARMS:
- /*
- * STEP 3: Compute a common set of timing parameters
- * suitable for all of the DIMMs on each memory controller
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Computing lowest common DIMM"
- " parameters for memctl=%u\n", i);
- compute_lowest_common_dimm_parameters(
- pinfo->dimm_params[i],
- &timing_params[i],
- CONFIG_DIMM_SLOTS_PER_CTLR);
- }
-
- case STEP_GATHER_OPTS:
- /* STEP 4: Gather configuration requirements from user */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Reloading memory controller "
- "configuration options for memctl=%u\n", i);
- /*
- * This "reloads" the memory controller options
- * to defaults. If the user "edits" an option,
- * next_step points to the step after this,
- * which is currently STEP_ASSIGN_ADDRESSES.
- */
- populate_memctl_options(
- timing_params[i].all_DIMMs_registered,
- &pinfo->memctl_opts[i],
- pinfo->dimm_params[i], i);
- }
-
- case STEP_ASSIGN_ADDRESSES:
- /* STEP 5: Assign addresses to chip selects */
- step_assign_addresses(pinfo,
- dbw_capacity_adjust,
- &all_controllers_memctl_interleaving,
- &all_controllers_rank_interleaving);
-
- case STEP_COMPUTE_REGS:
- /* STEP 6: compute controller register values */
- debug("FSL Memory ctrl cg register computation\n");
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- if (timing_params[i].ndimms_present == 0) {
- memset(&ddr_reg[i], 0,
- sizeof(fsl_ddr_cfg_regs_t));
- continue;
- }
-
- compute_fsl_memctl_config_regs(
- &pinfo->memctl_opts[i],
- &ddr_reg[i], &timing_params[i],
- pinfo->dimm_params[i],
- dbw_capacity_adjust[i]);
- }
-
- default:
- break;
- }
-
- /* Compute the total amount of memory. */
-
- /*
- * If bank interleaving but NOT memory controller interleaving
- * CS_BNDS describe the quantity of memory on each memory
- * controller, so the total is the sum across.
- */
- if (!all_controllers_memctl_interleaving
- && all_controllers_rank_interleaving) {
- total_mem = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- total_mem += timing_params[i].total_mem;
- }
-
- } else {
- /*
- * Compute the amount of memory available just by
- * looking for the highest valid CSn_BNDS value.
- * This allows us to also experiment with using
- * only CS0 when using dual-rank DIMMs.
- */
- unsigned int max_end = 0;
-
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- for (j = 0; j < CONFIG_CHIP_SELECTS_PER_CTRL; j++) {
- fsl_ddr_cfg_regs_t *reg = &ddr_reg[i];
- if (reg->cs[j].config & 0x80000000) {
- unsigned int end;
- end = reg->cs[j].bnds & 0xFFF;
- if (end > max_end) {
- max_end = end;
- }
- }
- }
- }
-
- total_mem = 1 + (((unsigned long long)max_end << 24ULL)
- | 0xFFFFFFULL);
- }
-
- return total_mem;
-}
-
-/*
- * fsl_ddr_sdram() -- this is the main function to be called by
- * initdram() in the board file.
- *
- * It returns amount of memory configured in bytes.
- */
-phys_size_t fsl_ddr_sdram(void)
-{
- unsigned int i;
- unsigned int memctl_interleaved;
- unsigned long long total_memory;
- fsl_ddr_info_t info;
-
- /* Reset info structure. */
- memset(&info, 0, sizeof(fsl_ddr_info_t));
-
- /* Compute it once normally. */
- total_memory = fsl_ddr_compute(&info, STEP_GET_SPD);
-
- /* Check for memory controller interleaving. */
- memctl_interleaved = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- memctl_interleaved +=
- info.memctl_opts[i].memctl_interleaving;
- }
-
- if (memctl_interleaved) {
- if (memctl_interleaved == CONFIG_NUM_DDR_CONTROLLERS) {
- debug("memctl interleaving\n");
- /*
- * Change the meaning of memctl_interleaved
- * to be "boolean".
- */
- memctl_interleaved = 1;
- } else {
- printf("Warning: memctl interleaving not "
- "properly configured on all controllers\n");
- memctl_interleaved = 0;
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
- info.memctl_opts[i].memctl_interleaving = 0;
- debug("Recomputing with memctl_interleaving off.\n");
- total_memory = fsl_ddr_compute(&info,
- STEP_ASSIGN_ADDRESSES);
- }
- }
-
- /* Program configuration registers. */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- debug("Programming controller %u\n", i);
- if (info.common_timing_params[i].ndimms_present == 0) {
- debug("No dimms present on controller %u; "
- "skipping programming\n", i);
- continue;
- }
-
- fsl_ddr_set_memctl_regs(&(info.fsl_ddr_config_reg[i]), i);
- }
-
- if (memctl_interleaved) {
- const unsigned int ctrl_num = 0;
-
- /* Only set LAWBAR1 if memory controller interleaving is on. */
- fsl_ddr_set_lawbar(&info.common_timing_params[0],
- memctl_interleaved, ctrl_num);
- } else {
- /*
- * Memory controller interleaving is NOT on;
- * set each lawbar individually.
- */
- for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
- fsl_ddr_set_lawbar(&info.common_timing_params[i],
- 0, i);
- }
- }
-
- debug("total_memory = %llu\n", total_memory);
-
-#if !defined(CONFIG_PHYS_64BIT)
- /* Check for 4G or more. Bad. */
- if (total_memory >= (1ull << 32)) {
- printf("Detected %lld MB of memory\n", total_memory >> 20);
- printf("This U-Boot only supports < 4G of DDR\n");
- printf("You could rebuild it with CONFIG_PHYS_64BIT\n");
- total_memory = CONFIG_MAX_MEM_MAPPED;
- }
-#endif
-
- return total_memory;
-}
diff --git a/cpu/mpc8xxx/ddr/options.c b/cpu/mpc8xxx/ddr/options.c
deleted file mode 100644
index 46731c8..0000000
--- a/cpu/mpc8xxx/ddr/options.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright 2008, 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <common.h>
-#include <asm/fsl_ddr_sdram.h>
-
-#include "ddr.h"
-
-/* Board-specific functions defined in each board's ddr.c */
-extern void fsl_ddr_board_options(memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num);
-
-unsigned int populate_memctl_options(int all_DIMMs_registered,
- memctl_options_t *popts,
- dimm_params_t *pdimm,
- unsigned int ctrl_num)
-{
- unsigned int i;
- const char *p;
-
- /* Chip select options. */
-
- /* Pick chip-select local options. */
- for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- /* If not DDR2, odt_rd_cfg and odt_wr_cfg need to be 0. */
-
- /* only for single CS? */
- popts->cs_local_opts[i].odt_rd_cfg = 0;
-
- popts->cs_local_opts[i].odt_wr_cfg = 1;
- popts->cs_local_opts[i].auto_precharge = 0;
- }
-
- /* Pick interleaving mode. */
-
- /*
- * 0 = no interleaving
- * 1 = interleaving between 2 controllers
- */
- popts->memctl_interleaving = 0;
-
- /*
- * 0 = cacheline
- * 1 = page
- * 2 = (logical) bank
- * 3 = superbank (only if CS interleaving is enabled)
- */
- popts->memctl_interleaving_mode = 0;
-
- /*
- * 0: cacheline: bit 30 of the 36-bit physical addr selects the memctl
- * 1: page: bit to the left of the column bits selects the memctl
- * 2: bank: bit to the left of the bank bits selects the memctl
- * 3: superbank: bit to the left of the chip select selects the memctl
- *
- * NOTE: ba_intlv (rank interleaving) is independent of memory
- * controller interleaving; it is only within a memory controller.
- * Must use superbank interleaving if rank interleaving is used and
- * memory controller interleaving is enabled.
- */
-
- /*
- * 0 = no
- * 0x40 = CS0,CS1
- * 0x20 = CS2,CS3
- * 0x60 = CS0,CS1 + CS2,CS3
- * 0x04 = CS0,CS1,CS2,CS3
- */
- popts->ba_intlv_ctl = 0;
-
- /* Memory Organization Parameters */
- popts->registered_dimm_en = all_DIMMs_registered;
-
- /* Operational Mode Paramters */
-
- /* Pick ECC modes */
-#ifdef CONFIG_DDR_ECC
- popts->ECC_mode = 1; /* 0 = disabled, 1 = enabled */
-#else
- popts->ECC_mode = 0; /* 0 = disabled, 1 = enabled */
-#endif
- popts->ECC_init_using_memctl = 1; /* 0 = use DMA, 1 = use memctl */
-
- /*
- * Choose DQS config
- * 0 for DDR1
- * 1 for DDR2
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->DQS_config = 0;
-#elif defined(CONFIG_FSL_DDR2) || defined(CONFIG_FSL_DDR3)
- popts->DQS_config = 1;
-#endif
-
- /* Choose self-refresh during sleep. */
- popts->self_refresh_in_sleep = 1;
-
- /* Choose dynamic power management mode. */
- popts->dynamic_power = 0;
-
- /* 0 = 64-bit, 1 = 32-bit, 2 = 16-bit */
- popts->data_bus_width = 0;
-
- /* Choose burst length. */
-#if defined(CONFIG_FSL_DDR3)
-#if defined(CONFIG_E500MC)
- popts->OTF_burst_chop_en = 0; /* on-the-fly burst chop disable */
- popts->burst_length = DDR_BL8; /* Fixed 8-beat burst len */
-#else
- popts->OTF_burst_chop_en = 1; /* on-the-fly burst chop */
- popts->burst_length = DDR_OTF; /* on-the-fly BC4 and BL8 */
-#endif
-#else
- popts->burst_length = DDR_BL4; /* has to be 4 for DDR2 */
-#endif
-
- /* Choose ddr controller address mirror mode */
-#if defined(CONFIG_FSL_DDR3)
- popts->mirrored_dimm = pdimm[0].mirrored_dimm;
-#endif
-
- /* Global Timing Parameters. */
- debug("mclk_ps = %u ps\n", get_memory_clk_period_ps());
-
- /* Pick a caslat override. */
- popts->cas_latency_override = 0;
- popts->cas_latency_override_value = 3;
- if (popts->cas_latency_override) {
- debug("using caslat override value = %u\n",
- popts->cas_latency_override_value);
- }
-
- /* Decide whether to use the computed derated latency */
- popts->use_derated_caslat = 0;
-
- /* Choose an additive latency. */
- popts->additive_latency_override = 0;
- popts->additive_latency_override_value = 3;
- if (popts->additive_latency_override) {
- debug("using additive latency override value = %u\n",
- popts->additive_latency_override_value);
- }
-
- /*
- * 2T_EN setting
- *
- * Factors to consider for 2T_EN:
- * - number of DIMMs installed
- * - number of components, number of active ranks
- * - how much time you want to spend playing around
- */
- popts->twoT_en = 0;
- popts->threeT_en = 0;
-
- /*
- * BSTTOPRE precharge interval
- *
- * Set this to 0 for global auto precharge
- *
- * FIXME: Should this be configured in picoseconds?
- * Why it should be in ps: better understanding of this
- * relative to actual DRAM timing parameters such as tRAS.
- * e.g. tRAS(min) = 40 ns
- */
- popts->bstopre = 0x100;
-
- /* Minimum CKE pulse width -- tCKE(MIN) */
- popts->tCKE_clock_pulse_width_ps
- = mclk_to_picos(FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR);
-
- /*
- * Window for four activates -- tFAW
- *
- * FIXME: UM: applies only to DDR2/DDR3 with eight logical banks only
- * FIXME: varies depending upon number of column addresses or data
- * FIXME: width, was considering looking at pdimm->primary_sdram_width
- */
-#if defined(CONFIG_FSL_DDR1)
- popts->tFAW_window_four_activates_ps = mclk_to_picos(1);
-
-#elif defined(CONFIG_FSL_DDR2)
- /*
- * x4/x8; some datasheets have 35000
- * x16 wide columns only? Use 50000?
- */
- popts->tFAW_window_four_activates_ps = 37500;
-
-#elif defined(CONFIG_FSL_DDR3)
- popts->tFAW_window_four_activates_ps = pdimm[0].tFAW_ps;
-#endif
- popts->zq_en = 0;
- popts->wrlvl_en = 0;
-#if defined(CONFIG_FSL_DDR3)
- /*
- * due to ddr3 dimm is fly-by topology
- * we suggest to enable write leveling to
- * meet the tQDSS under different loading.
- */
- popts->wrlvl_en = 1;
- popts->wrlvl_override = 0;
-#endif
-
- /*
- * Check interleaving configuration from environment.
- * Please refer to doc/README.fsl-ddr for the detail.
- *
- * If memory controller interleaving is enabled, then the data
- * bus widths must be programmed identically for the 2 memory
- * controllers.
- *
- * XXX: Attempt to set both controllers to the same chip select
- * interleaving mode. It will do a best effort to get the
- * requested ranks interleaved together such that the result
- * should be a subset of the requested configuration.
- */
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if ((p = getenv("memctl_intlv_ctl")) != NULL) {
- if (pdimm[0].n_ranks == 0) {
- printf("There is no rank on CS0. Because only rank on "
- "CS0 and ranks chip-select interleaved with CS0"
- " are controller interleaved, force non memory "
- "controller interleaving\n");
- popts->memctl_interleaving = 0;
- } else {
- popts->memctl_interleaving = 1;
- if (strcmp(p, "cacheline") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_CACHE_LINE_INTERLEAVING;
- else if (strcmp(p, "page") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_PAGE_INTERLEAVING;
- else if (strcmp(p, "bank") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_BANK_INTERLEAVING;
- else if (strcmp(p, "superbank") == 0)
- popts->memctl_interleaving_mode =
- FSL_DDR_SUPERBANK_INTERLEAVING;
- else
- popts->memctl_interleaving_mode =
- simple_strtoul(p, NULL, 0);
- }
- }
-#endif
-
- if( ((p = getenv("ba_intlv_ctl")) != NULL) &&
- (CONFIG_CHIP_SELECTS_PER_CTRL > 1)) {
- if (strcmp(p, "cs0_cs1") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1;
- else if (strcmp(p, "cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_and_cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_AND_CS2_CS3;
- else if (strcmp(p, "cs0_cs1_cs2_cs3") == 0)
- popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
- else
- popts->ba_intlv_ctl = simple_strtoul(p, NULL, 0);
-
- switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- case FSL_DDR_CS0_CS1:
- if (pdimm[0].n_ranks != 2) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(chip-select) for "
- "CS0+CS1, force non-interleaving!\n");
- }
- break;
- case FSL_DDR_CS2_CS3:
- if (pdimm[1].n_ranks !=2){
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS2+CS3, "
- "force non-interleaving!\n");
- }
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- if ((pdimm[0].n_ranks != 2)||(pdimm[1].n_ranks != 2)) {
- popts->ba_intlv_ctl = 0;
- printf("Not enough bank(CS) for CS0+CS1 or "
- "CS2+CS3, force non-interleaving!\n");
- }
- break;
- default:
- popts->ba_intlv_ctl = 0;
- break;
- }
- }
-
- fsl_ddr_board_options(popts, pdimm, ctrl_num);
-
- return 0;
-}
diff --git a/cpu/mpc8xxx/ddr/util.c b/cpu/mpc8xxx/ddr/util.c
deleted file mode 100644
index 1e2d921..0000000
--- a/cpu/mpc8xxx/ddr/util.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-
-#include "ddr.h"
-
-unsigned int fsl_ddr_get_mem_data_rate(void);
-
-/*
- * Round mclk_ps to nearest 10 ps in memory controller code.
- *
- * If an imprecise data rate is too high due to rounding error
- * propagation, compute a suitably rounded mclk_ps to compute
- * a working memory controller configuration.
- */
-unsigned int get_memory_clk_period_ps(void)
-{
- unsigned int mclk_ps;
-
- mclk_ps = 2000000000000ULL / fsl_ddr_get_mem_data_rate();
- /* round to nearest 10 ps */
- return 10 * ((mclk_ps + 5) / 10);
-}
-
-/* Convert picoseconds into DRAM clock cycles (rounding up if needed). */
-unsigned int picos_to_mclk(unsigned int picos)
-{
- const unsigned long long ULL_2e12 = 2000000000000ULL;
- const unsigned long long ULL_8Fs = 0xFFFFFFFFULL;
- unsigned long long clks;
- unsigned long long clks_temp;
-
- if (!picos)
- return 0;
-
- clks = fsl_ddr_get_mem_data_rate() * (unsigned long long) picos;
- clks_temp = clks;
- clks = clks / ULL_2e12;
- if (clks_temp % ULL_2e12) {
- clks++;
- }
-
- if (clks > ULL_8Fs) {
- clks = ULL_8Fs;
- }
-
- return (unsigned int) clks;
-}
-
-unsigned int mclk_to_picos(unsigned int mclk)
-{
- return get_memory_clk_period_ps() * mclk;
-}
-
-void
-__fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num)
-{
- unsigned long long base = memctl_common_params->base_address;
- unsigned long long size = memctl_common_params->total_mem;
-
- /*
- * If no DIMMs on this controller, do not proceed any further.
- */
- if (!memctl_common_params->ndimms_present) {
- return;
- }
-
-#if !defined(CONFIG_PHYS_64BIT)
- if (base >= CONFIG_MAX_MEM_MAPPED)
- return;
- if ((base + size) >= CONFIG_MAX_MEM_MAPPED)
- size = CONFIG_MAX_MEM_MAPPED - base;
-#endif
-
- if (ctrl_num == 0) {
- /*
- * Set up LAW for DDR controller 1 space.
- */
- unsigned int lawbar1_target_id = memctl_interleaved
- ? LAW_TRGT_IF_DDR_INTRLV : LAW_TRGT_IF_DDR_1;
-
- if (set_ddr_laws(base, size, lawbar1_target_id) < 0) {
- printf("%s: ERROR (ctrl #0, intrlv=%d)\n", __func__,
- memctl_interleaved);
- return ;
- }
- } else if (ctrl_num == 1) {
- if (set_ddr_laws(base, size, LAW_TRGT_IF_DDR_2) < 0) {
- printf("%s: ERROR (ctrl #1)\n", __func__);
- return ;
- }
- } else {
- printf("%s: unexpected DDR controller number (%u)\n", __func__,
- ctrl_num);
- }
-}
-
-__attribute__((weak, alias("__fsl_ddr_set_lawbar"))) void
-fsl_ddr_set_lawbar(const common_timing_params_t *memctl_common_params,
- unsigned int memctl_interleaved,
- unsigned int ctrl_num);
-
-void board_add_ram_info(int use_default)
-{
-#if defined(CONFIG_MPC85xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- uint32_t cs0_config = in_be32(&ddr->cs0_config);
-#endif
- uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
- int cas_lat;
-
- puts(" (DDR");
- switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
- SDRAM_CFG_SDRAM_TYPE_SHIFT) {
- case SDRAM_TYPE_DDR1:
- puts("1");
- break;
- case SDRAM_TYPE_DDR2:
- puts("2");
- break;
- case SDRAM_TYPE_DDR3:
- puts("3");
- break;
- default:
- puts("?");
- break;
- }
-
- if (sdram_cfg & SDRAM_CFG_32_BE)
- puts(", 32-bit");
- else
- puts(", 64-bit");
-
- /* Calculate CAS latency based on timing cfg values */
- cas_lat = ((in_be32(&ddr->timing_cfg_1) >> 16) & 0xf) + 1;
- if ((in_be32(&ddr->timing_cfg_3) >> 12) & 1)
- cas_lat += (8 << 1);
- printf(", CL=%d", cas_lat >> 1);
- if (cas_lat & 0x1)
- puts(".5");
-
- if (sdram_cfg & SDRAM_CFG_ECC_EN)
- puts(", ECC on)");
- else
- puts(", ECC off)");
-
-#if (CONFIG_NUM_DDR_CONTROLLERS > 1)
- if (cs0_config & 0x20000000) {
- puts("\n");
- puts(" DDR Controller Interleaving Mode: ");
-
- switch ((cs0_config >> 24) & 0xf) {
- case FSL_DDR_CACHE_LINE_INTERLEAVING:
- puts("cache line");
- break;
- case FSL_DDR_PAGE_INTERLEAVING:
- puts("page");
- break;
- case FSL_DDR_BANK_INTERLEAVING:
- puts("bank");
- break;
- case FSL_DDR_SUPERBANK_INTERLEAVING:
- puts("super-bank");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-#endif
-
- if ((sdram_cfg >> 8) & 0x7f) {
- puts("\n");
- puts(" DDR Chip-Select Interleaving Mode: ");
- switch(sdram_cfg >> 8 & 0x7f) {
- case FSL_DDR_CS0_CS1_CS2_CS3:
- puts("CS0+CS1+CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1:
- puts("CS0+CS1");
- break;
- case FSL_DDR_CS2_CS3:
- puts("CS2+CS3");
- break;
- case FSL_DDR_CS0_CS1_AND_CS2_CS3:
- puts("CS0+CS1 and CS2+CS3");
- break;
- default:
- puts("invalid");
- break;
- }
- }
-}
diff --git a/cpu/mpc8xxx/fdt.c b/cpu/mpc8xxx/fdt.c
deleted file mode 100644
index 3a9b584..0000000
--- a/cpu/mpc8xxx/fdt.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This file is derived from cpu/mpc85xx/cpu.c and cpu/mpc86xx/cpu.c.
- * Basically this file contains cpu specific common code for 85xx/86xx
- * processors.
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-void ft_fixup_num_cores(void *blob) {
- int off, num_cores, del_cores;
-
- del_cores = 0;
- num_cores = cpu_numcores();
-
- off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
- while (off != -FDT_ERR_NOTFOUND) {
- u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-
- /* if we find a cpu node outside of what we expect delete it
- * and reset the offset back to the start since we can't
- * trust the offsets anymore
- */
- if (*reg > num_cores-1) {
- fdt_del_node(blob, off);
- del_cores++;
- off = -1;
- }
- off = fdt_node_offset_by_prop_value(blob, off,
- "device_type", "cpu", 4);
- }
- debug ("%x core system found\n", num_cores);
- debug ("deleted %d extra core entry entries from device tree\n",
- del_cores);
-}
diff --git a/cpu/mpc8xxx/pci_cfg.c b/cpu/mpc8xxx/pci_cfg.c
deleted file mode 100644
index 9b7181d..0000000
--- a/cpu/mpc8xxx/pci_cfg.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <pci.h>
-
-struct pci_info {
- u32 cfg;
-};
-
-/* The cfg field is a bit mask in which each bit represents the value of
- * cfg_IO_ports[] signal and the bit is set if the interface would be
- * enabled based on the value of cfg_IO_ports[] signal
- *
- * On MPC86xx/PQ3 based systems:
- * we extract cfg_IO_ports from GUTS register PORDEVSR
- *
- * cfg_IO_ports only exist on systems w/PCIe (we set cfg 0 for systems
- * without PCIe)
- */
-
-#if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8560)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
-};
-#elif defined(CONFIG_MPC8541) || defined(CONFIG_MPC8555)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
-};
-#elif defined(CONFIG_MPC8536)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 5) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8544)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 4) | (1 << 5) |
- (1 << 6) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 6) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8548)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI_1] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCI_2] = {
- .cfg = 0,
- },
- /* PCI_2 is always host and we dont use iosel to determine enable/disable */
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 3) | (1 << 4) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8568)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 3) | (1 << 4) | (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8569)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 4) | (1 << 5) | (1 << 6) | (1 << 7) |
- (1 << 8) | (1 << 0xc) | (1 << 0xf),
- },
-};
-#elif defined(CONFIG_MPC8572)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 7) |
- (1 << 0xb) | (1 << 0xc) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 3) | (1 << 7),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 7),
- },
-};
-#elif defined(CONFIG_MPC8610)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCI_1] = {
- .cfg = 0,
- },
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 1) | (1 << 4),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0) | (1 << 4),
- },
-};
-#elif defined(CONFIG_MPC8641)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 2) | (1 << 3) | (1 << 5) | (1 << 6) |
- (1 << 7) | (1 << 0xe) | (1 << 0xf),
- },
-};
-#elif defined(CONFIG_P1011) || defined(CONFIG_P1020) || \
- defined(CONFIG_P1012) || defined(CONFIG_P1021)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 6) | (1 << 0xe) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0xe),
- },
-};
-#elif defined(CONFIG_P1013) || defined(CONFIG_P1022)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xa) |
- (1 << 0xb) | (1 << 0xd) | (1 << 0xe) |
- (1 << 0xf) | (1 << 0x15) | (1 << 0x16) |
- (1 << 0x17) | (1 << 0x18) | (1 << 0x19) |
- (1 << 0x1a) | (1 << 0x1b) | (1 << 0x1c) |
- (1 << 0x1d) | (1 << 0x1e) | (1 << 0x1f),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 0) | (1 << 1) | (1 << 6) | (1 << 7) |
- (1 << 9) | (1 << 0xa) | (1 << 0xb) | (1 << 0xd) |
- (1 << 0x15) | (1 << 0x16) | (1 << 0x17) |
- (1 << 0x18) | (1 << 0x1c),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 6) | (1 << 7) | (1 << 9) | (1 << 0xd) |
- (1 << 0x15) | (1 << 0x16) | (1 << 0x17) | (1 << 0x18) |
- (1 << 0x19) | (1 << 0x1a) | (1 << 0x1b),
- },
-};
-#elif defined(CONFIG_P2010) || defined(CONFIG_P2020)
-static struct pci_info pci_config_info[] =
-{
- [LAW_TRGT_IF_PCIE_1] = {
- .cfg = (1 << 0) | (1 << 2) | (1 << 4) | (1 << 6) |
- (1 << 0xd) | (1 << 0xe) | (1 << 0xf),
- },
- [LAW_TRGT_IF_PCIE_2] = {
- .cfg = (1 << 2) | (1 << 0xe),
- },
- [LAW_TRGT_IF_PCIE_3] = {
- .cfg = (1 << 2) | (1 << 4),
- },
-};
-#elif defined(CONFIG_FSL_CORENET)
-#else
-#error Need to define pci_config_info for processor
-#endif
-
-#ifndef CONFIG_FSL_CORENET
-int is_fsl_pci_cfg(enum law_trgt_if trgt, u32 io_sel)
-{
- return ((1 << io_sel) & pci_config_info[trgt].cfg);
-}
-#endif
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
deleted file mode 100644
index 5e6dbe3..0000000
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ /dev/null
@@ -1,464 +0,0 @@
-/*
- * cpu/ppc4xx/40x_spd_sdram.c
- * This SPD SDRAM detection code supports IBM/AMCC PPC44x cpu with a
- * SDRAM controller. Those are all current 405 PPC's.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_SPD_EEPROM) && !defined(CONFIG_440)
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-#define SDRAM0_CFG_DCE 0x80000000
-#define SDRAM0_CFG_SRE 0x40000000
-#define SDRAM0_CFG_PME 0x20000000
-#define SDRAM0_CFG_MEMCHK 0x10000000
-#define SDRAM0_CFG_REGEN 0x08000000
-#define SDRAM0_CFG_ECCDD 0x00400000
-#define SDRAM0_CFG_EMDULR 0x00200000
-#define SDRAM0_CFG_DRW_SHIFT (31-6)
-#define SDRAM0_CFG_BRPF_SHIFT (31-8)
-
-#define SDRAM0_TR_CASL_SHIFT (31-8)
-#define SDRAM0_TR_PTA_SHIFT (31-13)
-#define SDRAM0_TR_CTP_SHIFT (31-15)
-#define SDRAM0_TR_LDF_SHIFT (31-17)
-#define SDRAM0_TR_RFTA_SHIFT (31-29)
-#define SDRAM0_TR_RCD_SHIFT (31-31)
-
-#define SDRAM0_RTR_SHIFT (31-15)
-#define SDRAM0_ECCCFG_SHIFT (31-11)
-
-/* SDRAM0_CFG enable macro */
-#define SDRAM0_CFG_BRPF(x) ( ( x & 0x3)<< SDRAM0_CFG_BRPF_SHIFT )
-
-#define SDRAM0_BXCR_SZ_MASK 0x000e0000
-#define SDRAM0_BXCR_AM_MASK 0x0000e000
-
-#define SDRAM0_BXCR_SZ_SHIFT (31-14)
-#define SDRAM0_BXCR_AM_SHIFT (31-18)
-
-#define SDRAM0_BXCR_SZ(x) ( (( x << SDRAM0_BXCR_SZ_SHIFT) & SDRAM0_BXCR_SZ_MASK) )
-#define SDRAM0_BXCR_AM(x) ( (( x << SDRAM0_BXCR_AM_SHIFT) & SDRAM0_BXCR_AM_MASK) )
-
-#ifdef CONFIG_SPDDRAM_SILENT
-# define SPD_ERR(x) do { return 0; } while (0)
-#else
-# define SPD_ERR(x) do { printf(x); return(0); } while (0)
-#endif
-
-#define sdram_HZ_to_ns(hertz) (1000000000/(hertz))
-
-/* function prototypes */
-int spd_read(uint addr);
-
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * Input: null for default I2C spd functions or a pointer to a custom function
- * returning spd_data.
- */
-
-long int spd_sdram(int(read_spd)(uint addr))
-{
- int tmp,row,col;
- int total_size,bank_size,bank_code;
- int ecc_on;
- int mode;
- int bank_cnt;
-
- int sdram0_pmit=0x07c00000;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- int sdram0_besr0 = -1;
- int sdram0_besr1 = -1;
- int sdram0_eccesr = -1;
-#endif
- int sdram0_ecccfg;
-
- int sdram0_rtr=0;
- int sdram0_tr=0;
-
- int sdram0_b0cr;
- int sdram0_b1cr;
- int sdram0_b2cr;
- int sdram0_b3cr;
-
- int sdram0_cfg=0;
-
- int t_rp;
- int t_rcd;
- int t_ras;
- int t_rc;
- int min_cas;
-
- PPC4xx_SYS_INFO sys_info;
- unsigned long bus_period_x_10;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- if (read_spd == 0){
- read_spd=spd_read;
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
- }
-
- /* Make shure we are using SDRAM */
- if (read_spd(2) != 0x04) {
- SPD_ERR("SDRAM - non SDRAM memory module found\n");
- }
-
- /* ------------------------------------------------------------------
- * configure memory timing register
- *
- * data from DIMM:
- * 27 IN Row Precharge Time ( t RP)
- * 29 MIN RAS to CAS Delay ( t RCD)
- * 127 Component and Clock Detail ,clk0-clk3, junction temp, CAS
- * -------------------------------------------------------------------*/
-
- /*
- * first figure out which cas latency mode to use
- * use the min supported mode
- */
-
- tmp = read_spd(127) & 0x6;
- if (tmp == 0x02) { /* only cas = 2 supported */
- min_cas = 2;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x04) { /* only cas = 3 supported */
- min_cas = 3;
-/* t_ck = read_spd(9); */
-/* t_ac = read_spd(10); */
- } else if (tmp == 0x06) { /* 2,3 supported, so use 2 */
- min_cas = 2;
-/* t_ck = read_spd(23); */
-/* t_ac = read_spd(24); */
- } else {
- SPD_ERR("SDRAM - unsupported CAS latency \n");
- }
-
- /* get some timing values, t_rp,t_rcd,t_ras,t_rc
- */
- t_rp = read_spd(27);
- t_rcd = read_spd(29);
- t_ras = read_spd(30);
- t_rc = t_ras + t_rp;
-
- /* The following timing calcs subtract 1 before deviding.
- * this has effect of using ceiling instead of floor rounding,
- * and also subtracting 1 to convert number to reg value
- */
- /* set up CASL */
- sdram0_tr = (min_cas - 1) << SDRAM0_TR_CASL_SHIFT;
- /* set up PTA */
- sdram0_tr |= ((((t_rp - 1) * 10)/bus_period_x_10) & 0x3) << SDRAM0_TR_PTA_SHIFT;
- /* set up CTP */
- tmp = (((t_rc - t_rcd - t_rp -1) * 10) / bus_period_x_10) & 0x3;
- if (tmp < 1)
- tmp = 1;
- sdram0_tr |= tmp << SDRAM0_TR_CTP_SHIFT;
- /* set LDF = 2 cycles, reg value = 1 */
- sdram0_tr |= 1 << SDRAM0_TR_LDF_SHIFT;
- /* set RFTA = t_rfc/bus_period, use t_rfc = t_rc */
- tmp = (((t_rc - 1) * 10) / bus_period_x_10) - 3;
- if (tmp < 0)
- tmp = 0;
- if (tmp > 6)
- tmp = 6;
- sdram0_tr |= tmp << SDRAM0_TR_RFTA_SHIFT;
- /* set RCD = t_rcd/bus_period*/
- sdram0_tr |= ((((t_rcd - 1) * 10) / bus_period_x_10) &0x3) << SDRAM0_TR_RCD_SHIFT ;
-
-
- /*------------------------------------------------------------------
- * configure RTR register
- * -------------------------------------------------------------------*/
- row = read_spd(3);
- col = read_spd(4);
- tmp = read_spd(12) & 0x7f ; /* refresh type less self refresh bit */
- switch (tmp) {
- case 0x00:
- tmp = 15625;
- break;
- case 0x01:
- tmp = 15625 / 4;
- break;
- case 0x02:
- tmp = 15625 / 2;
- break;
- case 0x03:
- tmp = 15625 * 2;
- break;
- case 0x04:
- tmp = 15625 * 4;
- break;
- case 0x05:
- tmp = 15625 * 8;
- break;
- default:
- SPD_ERR("SDRAM - Bad refresh period \n");
- }
- /* convert from nsec to bus cycles */
- tmp = (tmp * 10) / bus_period_x_10;
- sdram0_rtr = (tmp & 0x3ff8) << SDRAM0_RTR_SHIFT;
-
- /*------------------------------------------------------------------
- * determine the number of banks used
- * -------------------------------------------------------------------*/
- /* byte 7:6 is module data width */
- if (read_spd(7) != 0)
- SPD_ERR("SDRAM - unsupported module width\n");
- tmp = read_spd(6);
- if (tmp < 32)
- SPD_ERR("SDRAM - unsupported module width\n");
- else if (tmp < 64)
- bank_cnt = 1; /* one bank per sdram side */
- else if (tmp < 73)
- bank_cnt = 2; /* need two banks per side */
- else if (tmp < 161)
- bank_cnt = 4; /* need four banks per side */
- else
- SPD_ERR("SDRAM - unsupported module width\n");
-
- /* byte 5 is the module row count (refered to as dimm "sides") */
- tmp = read_spd(5);
- if (tmp == 1)
- ;
- else if (tmp==2)
- bank_cnt *= 2;
- else if (tmp==4)
- bank_cnt *= 4;
- else
- bank_cnt = 8; /* 8 is an error code */
-
- if (bank_cnt > 4) /* we only have 4 banks to work with */
- SPD_ERR("SDRAM - unsupported module rows for this width\n");
-
- /* now check for ECC ability of module. We only support ECC
- * on 32 bit wide devices with 8 bit ECC.
- */
- if ((read_spd(11)==2) && (read_spd(6)==40) && (read_spd(14)==8)) {
- sdram0_ecccfg = 0xf << SDRAM0_ECCCFG_SHIFT;
- ecc_on = 1;
- } else {
- sdram0_ecccfg = 0;
- ecc_on = 0;
- }
-
- /*------------------------------------------------------------------
- * calculate total size
- * -------------------------------------------------------------------*/
- /* calculate total size and do sanity check */
- tmp = read_spd(31);
- total_size = 1 << 22; /* total_size = 4MB */
- /* now multiply 4M by the smallest device row density */
- /* note that we don't support asymetric rows */
- while (((tmp & 0x0001) == 0) && (tmp != 0)) {
- total_size = total_size << 1;
- tmp = tmp >> 1;
- }
- total_size *= read_spd(5); /* mult by module rows (dimm sides) */
-
- /*------------------------------------------------------------------
- * map rows * cols * banks to a mode
- * -------------------------------------------------------------------*/
-
- switch (row) {
- case 11:
- switch (col) {
- case 8:
- mode=4; /* mode 5 */
- break;
- case 9:
- case 10:
- mode=0; /* mode 1 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 12:
- switch (col) {
- case 8:
- mode=3; /* mode 4 */
- break;
- case 9:
- case 10:
- mode=1; /* mode 2 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- case 13:
- switch (col) {
- case 8:
- mode=5; /* mode 6 */
- break;
- case 9:
- case 10:
- if (read_spd(17) == 2)
- mode = 6; /* mode 7 */
- else
- mode = 2; /* mode 3 */
- break;
- case 11:
- mode = 2; /* mode 3 */
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
- break;
- default:
- SPD_ERR("SDRAM - unsupported mode\n");
- }
-
- /*------------------------------------------------------------------
- * using the calculated values, compute the bank
- * config register values.
- * -------------------------------------------------------------------*/
- sdram0_b1cr = 0;
- sdram0_b2cr = 0;
- sdram0_b3cr = 0;
-
- /* compute the size of each bank */
- bank_size = total_size / bank_cnt;
- /* convert bank size to bank size code for ppc4xx
- by takeing log2(bank_size) - 22 */
- tmp = bank_size; /* start with tmp = bank_size */
- bank_code = 0; /* and bank_code = 0 */
- while (tmp > 1) { /* this takes log2 of tmp */
- bank_code++; /* and stores result in bank_code */
- tmp = tmp >> 1;
- } /* bank_code is now log2(bank_size) */
- bank_code -= 22; /* subtract 22 to get the code */
-
- tmp = SDRAM0_BXCR_SZ(bank_code) | SDRAM0_BXCR_AM(mode) | 1;
- sdram0_b0cr = (bank_size * 0) | tmp;
-#ifndef CONFIG_405EP /* not on PPC405EP */
- if (bank_cnt > 1)
- sdram0_b2cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- sdram0_b1cr = (bank_size * 2) | tmp;
- if (bank_cnt > 3)
- sdram0_b3cr = (bank_size * 3) | tmp;
-#else
- /* PPC405EP chip only supports two SDRAM banks */
- if (bank_cnt > 1)
- sdram0_b1cr = (bank_size * 1) | tmp;
- if (bank_cnt > 2)
- total_size = 2 * bank_size;
-#endif
-
- /*
- * enable sdram controller DCE=1
- * enable burst read prefetch to 32 bytes BRPF=2
- * leave other functions off
- */
-
- /*------------------------------------------------------------------
- * now that we've done our calculations, we are ready to
- * program all the registers.
- * -------------------------------------------------------------------*/
-
- /* disable memcontroller so updates work */
- mtsdram(SDRAM0_CFG, 0);
-
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_BESR0, sdram0_besr0);
- mtsdram(SDRAM0_BESR1, sdram0_besr1);
- mtsdram(SDRAM0_ECCCFG, sdram0_ecccfg);
- mtsdram(SDRAM0_ECCESR, sdram0_eccesr);
-#endif
- mtsdram(SDRAM0_RTR, sdram0_rtr);
- mtsdram(SDRAM0_PMIT, sdram0_pmit);
- mtsdram(SDRAM0_B0CR, sdram0_b0cr);
- mtsdram(SDRAM0_B1CR, sdram0_b1cr);
-#ifndef CONFIG_405EP /* not on PPC405EP */
- mtsdram(SDRAM0_B2CR, sdram0_b2cr);
- mtsdram(SDRAM0_B3CR, sdram0_b3cr);
-#endif
- mtsdram(SDRAM0_TR, sdram0_tr);
-
- /* SDRAM have a power on delay, 500 micro should do */
- udelay(500);
- sdram0_cfg = SDRAM0_CFG_DCE | SDRAM0_CFG_BRPF(1) | SDRAM0_CFG_ECCDD | SDRAM0_CFG_EMDULR;
- if (ecc_on)
- sdram0_cfg |= SDRAM0_CFG_MEMCHK;
- mtsdram(SDRAM0_CFG, sdram0_cfg);
-
- return (total_size);
-}
-
-int spd_read(uint addr)
-{
- uchar data[2];
-
- if (i2c_read(SPD_EEPROM_ADDRESS, addr, 1, data, 1) == 0)
- return (int)data[0];
- else
- return 0;
-}
-
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
deleted file mode 100644
index 6176eab..0000000
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ /dev/null
@@ -1,1248 +0,0 @@
-/*
- * cpu/ppc4xx/44x_spd_ddr.c
- * This SPD DDR detection code supports IBM/AMCC PPC44x cpu with a
- * DDR controller. Those are 440GP/GX/EP/GR.
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * Based on code by:
- *
- * Kenneth Johansson ,Ericsson AB.
- * kenneth.johansson@etx.ericsson.se
- *
- * hacked up by bill hunter. fixed so we could run before
- * serial_init and console_init. previous version avoided this by
- * running out of cache memory during serial/console init, then running
- * this code later.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- * Support for AMCC 440 based on OpenBIOS draminit.c from IBM.
- *
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <i2c.h>
-#include <ppc4xx.h>
-#include <asm/mmu.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440GP) || defined(CONFIG_440GX) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR))
-
-/*
- * Set default values
- */
-#ifndef CONFIG_SYS_I2C_SPEED
-#define CONFIG_SYS_I2C_SPEED 50000
-#endif
-
-#define ONE_BILLION 1000000000
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*-----------------------------------------------------------------------------+
- | General Definition
- +-----------------------------------------------------------------------------*/
-#define DEFAULT_SPD_ADDR1 0x53
-#define DEFAULT_SPD_ADDR2 0x52
-#define MAXBANKS 4 /* at most 4 dimm banks */
-#define MAX_SPD_BYTES 256
-#define NUMHALFCYCLES 4
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define MAXBXCR 4
-#define TRUE 1
-#define FALSE 0
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/* bank_parms is used to sort the bank sizes by descending order */
-struct bank_param {
- unsigned long cr;
- unsigned long bank_size_bytes;
-};
-
-typedef struct bank_param BANKPARMS;
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
-extern const unsigned char cfg_simulate_spd_eeprom[128];
-#endif
-
-static unsigned char spd_read(uchar chip, uint addr);
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_tr1(void);
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-
-/*
- * This function is reading data from the DIMM module EEPROM over the SPD bus
- * and uses that to program the sdram controller.
- *
- * This works on boards that has the same schematics that the AMCC walnut has.
- *
- * BUG: Don't handle ECC memory
- * BUG: A few values in the TR register is currently hardcoded
- */
-long int spd_sdram(void) {
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_populated[sizeof(iic0_dimm_addr)];
- unsigned long total_size;
- unsigned long cfg0;
- unsigned long mcsts;
- unsigned long num_dimm_banks; /* on board dimm banks */
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*
- * Read the SPD information using I2C interface. Check to see if the
- * DIMM slots are populated.
- */
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the memory type for the dimms plugged.
- */
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * Check the voltage type for the dimms plugged.
- */
- check_volt_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG0)
- */
- program_cfg0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program 440GP SDRAM controller options (SDRAM0_CFG1)
- */
- program_cfg1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM refresh register (SDRAM0_RTR)
- */
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program SDRAM Timing Register 0 (SDRAM0_TR0)
- */
- program_tr0(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*
- * program the BxCR registers to find out total sdram installed
- */
- total_size = program_bxcr(dimm_populated, iic0_dimm_addr,
- num_dimm_banks);
-
-#ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */
- /* and program tlb entries for this size (dynamic) */
- program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE);
-#endif
-
- /*
- * program SDRAM Clock Timing Register (SDRAM0_CLKTR)
- */
- mtsdram(SDRAM0_CLKTR, 0x40000000);
-
- /*
- * delay to ensure 200 usec has elapsed
- */
- udelay(400);
-
- /*
- * enable the memory controller
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- mtsdram(SDRAM0_CFG0, cfg0 | SDRAM_CFG0_DCEN);
-
- /*
- * wait for SDRAM_CFG0_DC_EN to complete
- */
- while (1) {
- mfsdram(SDRAM0_MCSTS, mcsts);
- if ((mcsts & SDRAM_MCSTS_MRSC) != 0)
- break;
- }
-
- /*
- * program SDRAM Timing Register 1, adding some delays
- */
- program_tr1();
-
-#ifdef CONFIG_DDR_ECC
- /*
- * If ecc is enabled, initialize the parity bits.
- */
- ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
-#endif
-
- return total_size;
-}
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
-#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
- if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
- /*
- * Onboard spd eeprom requested -> simulate values
- */
- return cfg_simulate_spd_eeprom[addr];
- }
-#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
-
- if (i2c_probe(chip) == 0) {
- if (i2c_read(chip, addr, 1, data, 1) == 0) {
- return data[0];
- }
- }
-
- return 0;
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned char dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 7:
- debug("DIMM slot %lu: DDR SDRAM detected\n", dimm_num);
- break;
- default:
- printf("ERROR: Unsupported DIMM detected in slot %lu.\n",
- dimm_num);
- printf("Only DDR SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-static void check_volt_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (voltage_type != 0x04) {
- printf("ERROR: DIMM %lu with unsupported voltage level.\n",
- dimm_num);
- spd_ddr_init_hang ();
- } else {
- debug("DIMM %lu voltage level supported.\n", dimm_num);
- }
- break;
- }
- }
-}
-
-static void program_cfg0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long cfg0;
- unsigned long ecc_enabled;
- unsigned char ecc;
- unsigned char attributes;
- unsigned long data_width;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
-
- /*
- * get Memory Controller Options 0 data
- */
- mfsdram(SDRAM0_CFG0, cfg0);
-
- /*
- * clear bits
- */
- cfg0 &= ~(SDRAM_CFG0_DCEN | SDRAM_CFG0_MCHK_MASK |
- SDRAM_CFG0_RDEN | SDRAM_CFG0_PMUD |
- SDRAM_CFG0_DMWD_MASK |
- SDRAM_CFG0_UIOS_MASK | SDRAM_CFG0_PDP);
-
-
- /*
- * FIXME: assume the DDR SDRAMs in both banks are the same
- */
- ecc_enabled = TRUE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- ecc = spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) {
- ecc_enabled = FALSE;
- }
-
- /*
- * program Registered DIMM Enable
- */
- attributes = spd_read(iic0_dimm_addr[dimm_num], 21);
- if ((attributes & 0x02) != 0x00) {
- cfg0 |= SDRAM_CFG0_RDEN;
- }
-
- /*
- * program DDR SDRAM Data Width
- */
- data_width =
- (unsigned long)spd_read(iic0_dimm_addr[dimm_num],6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num],7)) << 8);
- if (data_width == 64 || data_width == 72) {
- dimm_64bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_64;
- } else if (data_width == 32 || data_width == 40) {
- dimm_32bit = TRUE;
- cfg0 |= SDRAM_CFG0_DMWD_32;
- } else {
- printf("WARNING: DIMM with datawidth of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit datawidths supported.\n");
- spd_ddr_init_hang ();
- }
- break;
- }
- }
-
- /*
- * program Memory Data Error Checking
- */
- if (ecc_enabled == TRUE) {
- cfg0 |= SDRAM_CFG0_MCHK_GEN;
- } else {
- cfg0 |= SDRAM_CFG0_MCHK_NON;
- }
-
- /*
- * program Page Management Unit (0 == enabled)
- */
- cfg0 &= ~SDRAM_CFG0_PMUD;
-
- /*
- * program Memory Controller Options 0
- * Note: DCEN must be enabled after all DDR SDRAM controller
- * configuration registers get initialized.
- */
- mtsdram(SDRAM0_CFG0, cfg0);
-}
-
-static void program_cfg1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long cfg1;
- mfsdram(SDRAM0_CFG1, cfg1);
-
- /*
- * Self-refresh exit, disable PM
- */
- cfg1 &= ~(SDRAM_CFG1_SRE | SDRAM_CFG1_PMEN);
-
- /*
- * program Memory Controller Options 1
- */
- mtsdram(SDRAM0_CFG1, cfg1);
-}
-
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bus_period_x_10;
- unsigned long refresh_rate = 0;
- unsigned char refresh_rate_type;
- unsigned long refresh_interval;
- unsigned long sdram_rtr;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- refresh_rate_type = 0x7F & spd_read(iic0_dimm_addr[dimm_num], 12);
- switch (refresh_rate_type) {
- case 0x00:
- refresh_rate = 15625;
- break;
- case 0x01:
- refresh_rate = 15625/4;
- break;
- case 0x02:
- refresh_rate = 15625/2;
- break;
- case 0x03:
- refresh_rate = 15626*2;
- break;
- case 0x04:
- refresh_rate = 15625*4;
- break;
- case 0x05:
- refresh_rate = 15625*8;
- break;
- default:
- printf("ERROR: DIMM %lu, unsupported refresh rate/type.\n",
- dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n");
- break;
- }
-
- break;
- }
- }
-
- refresh_interval = refresh_rate * 10 / bus_period_x_10;
- sdram_rtr = (refresh_interval & 0x3ff8) << 16;
-
- /*
- * program Refresh Timer Register (SDRAM0_RTR)
- */
- mtsdram(SDRAM0_RTR, sdram_rtr);
-}
-
-static void program_tr0(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tr0;
- unsigned char wcsbc;
- unsigned char t_rp_ns;
- unsigned char t_rcd_ns;
- unsigned char t_ras_ns;
- unsigned long t_rp_clk;
- unsigned long t_ras_rcd_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rfc_clk;
- unsigned long plb_check;
- unsigned char cas_bit;
- unsigned long cas_index;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned long cycle_time_ns_x_10[3];
- unsigned long tcyc_3_0_ns_x_10;
- unsigned long tcyc_2_5_ns_x_10;
- unsigned long tcyc_2_0_ns_x_10;
- unsigned long tcyc_reg;
- unsigned long bus_period_x_10;
- PPC4xx_SYS_INFO sys_info;
- unsigned long residue;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
- bus_period_x_10 = ONE_BILLION / (sys_info.freqPLB / 10);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR0, tr0);
- tr0 &= ~(SDRAM_TR0_SDWR_MASK | SDRAM_TR0_SDWD_MASK |
- SDRAM_TR0_SDCL_MASK | SDRAM_TR0_SDPA_MASK |
- SDRAM_TR0_SDCP_MASK | SDRAM_TR0_SDLD_MASK |
- SDRAM_TR0_SDRA_MASK | SDRAM_TR0_SDRD_MASK);
-
- /*
- * initialization
- */
- wcsbc = 0;
- t_rp_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- tcyc_2_0_ns_x_10 = 0;
- tcyc_2_5_ns_x_10 = 0;
- tcyc_3_0_ns_x_10 = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- wcsbc = spd_read(iic0_dimm_addr[dimm_num], 15);
- t_rp_ns = spd_read(iic0_dimm_addr[dimm_num], 27) >> 2;
- t_rcd_ns = spd_read(iic0_dimm_addr[dimm_num], 29) >> 2;
- t_ras_ns = spd_read(iic0_dimm_addr[dimm_num], 30);
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
-
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n",
- dimm_num);
- spd_ddr_init_hang ();
- }
-
- cycle_time_ns_x_10[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 10) + (tcyc_reg & 0x0F);
- }
-
- cas_index = 0;
-
- if ((cas_bit & 0x80) != 0) {
- cas_index += 3;
- } else if ((cas_bit & 0x40) != 0) {
- cas_index += 2;
- } else if ((cas_bit & 0x20) != 0) {
- cas_index += 1;
- }
-
- if (((cas_bit & 0x10) != 0) && (cas_index < 3)) {
- tcyc_3_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) != 0) || (cas_index < 3)) {
- tcyc_2_5_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) != 0) || (cas_index < 3)) {
- tcyc_2_0_ns_x_10 = cycle_time_ns_x_10[cas_index];
- cas_index++;
- } else {
- if (cas_index != 0) {
- cas_index++;
- }
- cas_2_0_available = FALSE;
- }
-
- break;
- }
- }
-
- /*
- * Program SD_WR and SD_WCSBC fields
- */
- tr0 |= SDRAM_TR0_SDWR_2_CLK; /* Write Recovery: 2 CLK */
- switch (wcsbc) {
- case 0:
- tr0 |= SDRAM_TR0_SDWD_0_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDWD_1_CLK;
- break;
- }
-
- /*
- * Program SD_CASL field
- */
- if ((cas_2_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_0_CLK;
- } else if ((cas_2_5_available == TRUE) &&
- (bus_period_x_10 >= tcyc_2_5_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_2_5_CLK;
- } else if ((cas_3_0_available == TRUE) &&
- (bus_period_x_10 >= tcyc_3_0_ns_x_10)) {
- tr0 |= SDRAM_TR0_SDCL_3_0_CLK;
- } else {
- printf("ERROR: No supported CAS latency with the installed DIMMs.\n");
- printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * Calculate Trp in clock cycles and round up if necessary
- * Program SD_PTA field
- */
- t_rp_clk = sys_info.freqPLB * t_rp_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rp_clk / t_rp_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rp_clk++;
- }
- switch ((unsigned long)t_rp_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDPA_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDPA_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDPA_4_CLK;
- break;
- }
-
- /*
- * Program SD_CTP field
- */
- t_ras_rcd_clk = sys_info.freqPLB * (t_ras_ns - t_rcd_ns) / ONE_BILLION;
- plb_check = ONE_BILLION * t_ras_rcd_clk / (t_ras_ns - t_rcd_ns);
- if (sys_info.freqPLB != plb_check) {
- t_ras_rcd_clk++;
- }
- switch (t_ras_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDCP_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDCP_3_CLK;
- break;
- case 4:
- tr0 |= SDRAM_TR0_SDCP_4_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDCP_5_CLK;
- break;
- }
-
- /*
- * Program SD_LDF field
- */
- tr0 |= SDRAM_TR0_SDLD_2_CLK;
-
- /*
- * Program SD_RFTA field
- * FIXME tRFC hardcoded as 75 nanoseconds
- */
- t_rfc_clk = sys_info.freqPLB / (ONE_BILLION / 75);
- residue = sys_info.freqPLB % (ONE_BILLION / 75);
- if (residue >= (ONE_BILLION / 150)) {
- t_rfc_clk++;
- }
- switch (t_rfc_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- case 4:
- case 5:
- case 6:
- tr0 |= SDRAM_TR0_SDRA_6_CLK;
- break;
- case 7:
- tr0 |= SDRAM_TR0_SDRA_7_CLK;
- break;
- case 8:
- tr0 |= SDRAM_TR0_SDRA_8_CLK;
- break;
- case 9:
- tr0 |= SDRAM_TR0_SDRA_9_CLK;
- break;
- case 10:
- tr0 |= SDRAM_TR0_SDRA_10_CLK;
- break;
- case 11:
- tr0 |= SDRAM_TR0_SDRA_11_CLK;
- break;
- case 12:
- tr0 |= SDRAM_TR0_SDRA_12_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRA_13_CLK;
- break;
- }
-
- /*
- * Program SD_RCD field
- */
- t_rcd_clk = sys_info.freqPLB * t_rcd_ns / ONE_BILLION;
- plb_check = ONE_BILLION * t_rcd_clk / t_rcd_ns;
- if (sys_info.freqPLB != plb_check) {
- t_rcd_clk++;
- }
- switch (t_rcd_clk) {
- case 0:
- case 1:
- case 2:
- tr0 |= SDRAM_TR0_SDRD_2_CLK;
- break;
- case 3:
- tr0 |= SDRAM_TR0_SDRD_3_CLK;
- break;
- default:
- tr0 |= SDRAM_TR0_SDRD_4_CLK;
- break;
- }
-
- debug("tr0: %x\n", tr0);
- mtsdram(SDRAM0_TR0, tr0);
-}
-
-static int short_mem_test(void)
-{
- unsigned long i, j;
- unsigned long bxcr_num;
- unsigned long *membase;
- const unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55}};
-
- for (bxcr_num = 0; bxcr_num < MAXBXCR; bxcr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bxcr_num << 2));
- if ((mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBE) == SDRAM_BXCR_SDBE) {
- /* Bank is enabled */
- membase = (unsigned long*)
- (mfdcr(SDRAM0_CFGDATA) & SDRAM_BXCR_SDBA_MASK);
-
- /*
- * Run the short memory test
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- /* printf("bank enabled base:%x\n", &membase[j]); */
- membase[j] = test[i][j];
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((unsigned long)&(membase[j]));
- return 0;
- }
- ppcDcbf((unsigned long)&(membase[j]));
- }
-
- if (j < NUMMEMWORDS)
- return 0;
- }
-
- /*
- * see if the rdclt value passed
- */
- if (i < NUMMEMTESTS)
- return 0;
- }
- }
-
- return 1;
-}
-
-static void program_tr1(void)
-{
- unsigned long tr0;
- unsigned long tr1;
- unsigned long cfg0;
- unsigned long ecc_temp;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long k;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- unsigned long rdclt;
- unsigned long rdclt_offset;
- long max_start;
- long max_end;
- long rdclt_average;
- unsigned char window_found;
- unsigned char fail_found;
- unsigned char pass_found;
- PPC4xx_SYS_INFO sys_info;
-
- /*
- * get the board info
- */
- get_sys_info(&sys_info);
-
- /*
- * get SDRAM Timing Register 0 (SDRAM_TR0) and clear bits
- */
- mfsdram(SDRAM0_TR1, tr1);
- tr1 &= ~(SDRAM_TR1_RDSS_MASK | SDRAM_TR1_RDSL_MASK |
- SDRAM_TR1_RDCD_MASK | SDRAM_TR1_RDCT_MASK);
-
- mfsdram(SDRAM0_TR0, tr0);
- if (((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) &&
- (sys_info.freqPLB > 100000000)) {
- tr1 |= SDRAM_TR1_RDSS_TR2;
- tr1 |= SDRAM_TR1_RDSL_STAGE3;
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDSS_TR1;
- tr1 |= SDRAM_TR1_RDSL_STAGE2;
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * save CFG0 ECC setting to a temporary variable and turn ECC off
- */
- mfsdram(SDRAM0_CFG0, cfg0);
- ecc_temp = cfg0 & SDRAM_CFG0_MCHK_MASK;
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | SDRAM_CFG0_MCHK_NON);
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM0_DLYCAL, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- rdclt_offset = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
- debug("Starting memory test ");
-
- for (k = 0; k < NUMHALFCYCLES; k++) {
- for (rdclt = 0; rdclt < dly_val; rdclt++) {
- /*
- * Set the timing reg for the test.
- */
- mtsdram(SDRAM0_TR1, (tr1 | SDRAM_TR1_RDCT_ENCODE(rdclt)));
-
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0) {
- current_start = rdclt_offset + rdclt;
- }
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rdclt_offset + rdclt;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val>>2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- }
- debug(".");
-
- if (window_found == TRUE) {
- break;
- }
-
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- rdclt_offset += dly_val;
- }
- debug("\n");
-
- /*
- * make sure we find the window
- */
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay.\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * restore the orignal ECC setting
- */
- mtsdram(SDRAM0_CFG0, (cfg0 & ~SDRAM_CFG0_MCHK_MASK) | ecc_temp);
-
- /*
- * set the SDRAM TR1 RDCD value
- */
- tr1 &= ~SDRAM_TR1_RDCD_MASK;
- if ((tr0 & SDRAM_TR0_SDCL_MASK) == SDRAM_TR0_SDCL_2_5_CLK) {
- tr1 |= SDRAM_TR1_RDCD_RCD_1_2;
- } else {
- tr1 |= SDRAM_TR1_RDCD_RCD_0_0;
- }
-
- /*
- * set the SDRAM TR1 RDCLT value
- */
- tr1 &= ~SDRAM_TR1_RDCT_MASK;
- while (max_end >= (dly_val << 1)) {
- max_end -= (dly_val << 1);
- max_start -= (dly_val << 1);
- }
-
- rdclt_average = ((max_start + max_end) >> 1);
-
- if (rdclt_average < 0) {
- rdclt_average = 0;
- }
-
- if (rdclt_average >= dly_val) {
- rdclt_average -= dly_val;
- tr1 = tr1 ^ SDRAM_TR1_RDCD_MASK;
- }
- tr1 |= SDRAM_TR1_RDCT_ENCODE(rdclt_average);
-
- debug("tr1: %x\n", tr1);
-
- /*
- * program SDRAM Timing Register 1 TR1
- */
- mtsdram(SDRAM0_TR1, tr1);
-}
-
-static unsigned long program_bxcr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long bank_base_addr;
- unsigned long cr;
- unsigned long i;
- unsigned long j;
- unsigned long temp;
- unsigned char num_row_addr;
- unsigned char num_col_addr;
- unsigned char num_banks;
- unsigned char bank_size_id;
- unsigned long ctrl_bank_num[MAXBANKS];
- unsigned long bx_cr_num;
- unsigned long largest_size_index;
- unsigned long largest_size;
- unsigned long current_size_index;
- BANKPARMS bank_parms[MAXBXCR];
- unsigned long sorted_bank_num[MAXBXCR]; /* DDR Controller bank number table (sorted by size) */
- unsigned long sorted_bank_size[MAXBXCR]; /* DDR Controller bank size table (sorted by size)*/
-
- /*
- * Set the BxCR regs. First, wipe out the bank config registers.
- */
- for (bx_cr_num = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (bx_cr_num << 2));
- mtdcr(SDRAM0_CFGDATA, 0x00000000);
- bank_parms[bx_cr_num].bank_size_bytes = 0;
- }
-
-#ifdef CONFIG_BAMBOO
- /*
- * This next section is hardware dependent and must be programmed
- * to match the hardware. For bamboo, the following holds...
- * 1. SDRAM0_B0CR: Bank 0 of dimm 0 ctrl_bank_num : 0 (soldered onboard)
- * 2. SDRAM0_B1CR: Bank 0 of dimm 1 ctrl_bank_num : 1
- * 3. SDRAM0_B2CR: Bank 1 of dimm 1 ctrl_bank_num : 1
- * 4. SDRAM0_B3CR: Bank 0 of dimm 2 ctrl_bank_num : 3
- * ctrl_bank_num corresponds to the first usable DDR controller bank number by DIMM
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 1;
- ctrl_bank_num[2] = 3;
-#else
- /*
- * Ocotea, Ebony and the other IBM/AMCC eval boards have
- * 2 DIMM slots with each max 2 banks
- */
- ctrl_bank_num[0] = 0;
- ctrl_bank_num[1] = 2;
-#endif
-
- /*
- * reset the bank_base address
- */
- bank_base_addr = CONFIG_SYS_SDRAM_BASE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- num_row_addr = spd_read(iic0_dimm_addr[dimm_num], 3);
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 5);
- bank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
- debug("DIMM%d: row=%d col=%d banks=%d\n", dimm_num,
- num_row_addr, num_col_addr, num_banks);
-
- /*
- * Set the SDRAM0_BxCR regs
- */
- cr = 0;
- switch (bank_size_id) {
- case 0x02:
- cr |= SDRAM_BXCR_SDSZ_8;
- break;
- case 0x04:
- cr |= SDRAM_BXCR_SDSZ_16;
- break;
- case 0x08:
- cr |= SDRAM_BXCR_SDSZ_32;
- break;
- case 0x10:
- cr |= SDRAM_BXCR_SDSZ_64;
- break;
- case 0x20:
- cr |= SDRAM_BXCR_SDSZ_128;
- break;
- case 0x40:
- cr |= SDRAM_BXCR_SDSZ_256;
- break;
- case 0x80:
- cr |= SDRAM_BXCR_SDSZ_512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- bank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- switch (num_col_addr) {
- case 0x08:
- cr |= SDRAM_BXCR_SDAM_1;
- break;
- case 0x09:
- cr |= SDRAM_BXCR_SDAM_2;
- break;
- case 0x0A:
- cr |= SDRAM_BXCR_SDAM_3;
- break;
- case 0x0B:
- cr |= SDRAM_BXCR_SDAM_4;
- break;
- default:
- printf("DDR-SDRAM: DIMM %lu BxCR configuration.\n",
- dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-
- /*
- * enable the bank
- */
- cr |= SDRAM_BXCR_SDBE;
-
- for (i = 0; i < num_banks; i++) {
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
- (4 << 20) * bank_size_id;
- bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
- debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
- dimm_num, i, ctrl_bank_num[dimm_num]+i,
- bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- }
- }
- }
-
- /* Initialize sort tables */
- for (i = 0; i < MAXBXCR; i++) {
- sorted_bank_num[i] = i;
- sorted_bank_size[i] = bank_parms[i].bank_size_bytes;
- }
-
- for (i = 0; i < MAXBXCR-1; i++) {
- largest_size = sorted_bank_size[i];
- largest_size_index = 255;
-
- /* Find the largest remaining value */
- for (j = i + 1; j < MAXBXCR; j++) {
- if (sorted_bank_size[j] > largest_size) {
- /* Save largest remaining value and its index */
- largest_size = sorted_bank_size[j];
- largest_size_index = j;
- }
- }
-
- if (largest_size_index != 255) {
- /* Swap the current and largest values */
- current_size_index = sorted_bank_num[largest_size_index];
- sorted_bank_size[largest_size_index] = sorted_bank_size[i];
- sorted_bank_size[i] = largest_size;
- sorted_bank_num[largest_size_index] = sorted_bank_num[i];
- sorted_bank_num[i] = current_size_index;
- }
- }
-
- /* Set the SDRAM0_BxCR regs thanks to sort tables */
- for (bx_cr_num = 0, bank_base_addr = 0; bx_cr_num < MAXBXCR; bx_cr_num++) {
- if (bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes) {
- mtdcr(SDRAM0_CFGADDR, SDRAM0_B0CR + (sorted_bank_num[bx_cr_num] << 2));
- temp = mfdcr(SDRAM0_CFGDATA) & ~(SDRAM_BXCR_SDBA_MASK | SDRAM_BXCR_SDSZ_MASK |
- SDRAM_BXCR_SDAM_MASK | SDRAM_BXCR_SDBE);
- temp = temp | (bank_base_addr & SDRAM_BXCR_SDBA_MASK) |
- bank_parms[sorted_bank_num[bx_cr_num]].cr;
- mtdcr(SDRAM0_CFGDATA, temp);
- bank_base_addr += bank_parms[sorted_bank_num[bx_cr_num]].bank_size_bytes;
- debug("SDRAM0_B%dCR=0x%08lx\n", sorted_bank_num[bx_cr_num], temp);
- }
- }
-
- return(bank_base_addr);
-}
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
deleted file mode 100644
index 593a286..0000000
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ /dev/null
@@ -1,3174 +0,0 @@
-/*
- * cpu/ppc4xx/44x_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX(r)
- * 440/460: 440SP/440SPe/460EX/460GT
- *
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
-
- * (C) Copyright 2007-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-
-#define PPC4xx_IBM_DDR2_DUMP_REGISTER(mnemonic) \
- do { \
- u32 data; \
- mfsdram(SDRAM_##mnemonic, data); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#define PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(mnemonic) \
- do { \
- u32 data; \
- data = mfdcr(SDRAM_##mnemonic); \
- printf("%20s[%02x] = 0x%08X\n", \
- "SDRAM_" #mnemonic, SDRAM_##mnemonic, data); \
- } while (0)
-
-#if defined(CONFIG_440)
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2
- * memory region. Right now the cache should still be disabled in U-Boot
- * because of the EMAC driver, that need its buffer descriptor to be located
- * in non cached memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#ifdef CONFIG_4xx_DCACHE
-/* enable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE 0
-#else
-/* disable caching on SDRAM */
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE
-#endif /* CONFIG_4xx_DCACHE */
-
-void dcbz_area(u32 start_address, u32 num_bytes);
-#endif /* CONFIG_440 */
-
-#define MAXRANKS 4
-#define MAXBXCF 4
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#if !defined(CONFIG_NAND_SPL)
-/*-----------------------------------------------------------------------------+
- * sdram_memsize
- *-----------------------------------------------------------------------------*/
-phys_size_t sdram_memsize(void)
-{
- phys_size_t mem_size;
- unsigned long mcopt2;
- unsigned long mcstat;
- unsigned long mb0cf;
- unsigned long sdsz;
- unsigned long i;
-
- mem_size = 0;
-
- mfsdram(SDRAM_MCOPT2, mcopt2);
- mfsdram(SDRAM_MCSTAT, mcstat);
-
- /* DDR controller must be enabled and not in self-refresh. */
- /* Otherwise memsize is zero. */
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
- for (i = 0; i < MAXBXCF; i++) {
- mfsdram(SDRAM_MB0CF + (i << 2), mb0cf);
- /* Banks enabled */
- if ((mb0cf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-#if defined(CONFIG_440)
- sdsz = mfdcr_any(SDRAM_R0BAS + i) & SDRAM_RXBAS_SDSZ_MASK;
-#else
- sdsz = mb0cf & SDRAM_RXBAS_SDSZ_MASK;
-#endif
- switch(sdsz) {
- case SDRAM_RXBAS_SDSZ_8:
- mem_size+=8;
- break;
- case SDRAM_RXBAS_SDSZ_16:
- mem_size+=16;
- break;
- case SDRAM_RXBAS_SDSZ_32:
- mem_size+=32;
- break;
- case SDRAM_RXBAS_SDSZ_64:
- mem_size+=64;
- break;
- case SDRAM_RXBAS_SDSZ_128:
- mem_size+=128;
- break;
- case SDRAM_RXBAS_SDSZ_256:
- mem_size+=256;
- break;
- case SDRAM_RXBAS_SDSZ_512:
- mem_size+=512;
- break;
- case SDRAM_RXBAS_SDSZ_1024:
- mem_size+=1024;
- break;
- case SDRAM_RXBAS_SDSZ_2048:
- mem_size+=2048;
- break;
- case SDRAM_RXBAS_SDSZ_4096:
- mem_size+=4096;
- break;
- default:
- printf("WARNING: Unsupported bank size (SDSZ=0x%lx)!\n"
- , sdsz);
- mem_size=0;
- break;
- }
- }
- }
- }
-
- return mem_size << 20;
-}
-
-/*-----------------------------------------------------------------------------+
- * is_ecc_enabled
- *-----------------------------------------------------------------------------*/
-static unsigned long is_ecc_enabled(void)
-{
- unsigned long val;
-
- mfsdram(SDRAM_MCOPT1, val);
-
- return SDRAM_MCOPT1_MCHK_CHK_DECODE(val);
-}
-
-/*-----------------------------------------------------------------------------+
- * board_add_ram_info
- *-----------------------------------------------------------------------------*/
-void board_add_ram_info(int use_default)
-{
- PPC4xx_SYS_INFO board_cfg;
- u32 val;
-
- if (is_ecc_enabled())
- puts(" (ECC");
- else
- puts(" (ECC not");
-
- get_sys_info(&board_cfg);
-
-#if defined(CONFIG_405EX)
- val = board_cfg.freqPLB;
-#else
- mfsdr(SDR0_DDR0, val);
- val = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(val), 1);
-#endif
- printf(" enabled, %d MHz", (val * 2) / 1000000);
-
- mfsdram(SDRAM_MMODE, val);
- val = (val & SDRAM_MMODE_DCL_MASK) >> 4;
- printf(", CL%d)", val);
-}
-#endif /* !CONFIG_NAND_SPL */
-
-#if defined(CONFIG_SPD_EEPROM)
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define SDRAM_DDR1 1
-#define SDRAM_DDR2 2
-#define SDRAM_NONE 0
-
-#define MAXDIMMS 2
-#define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */
-
-#define ONE_BILLION 1000000000
-
-#define CMD_NOP (7 << 19)
-#define CMD_PRECHARGE (2 << 19)
-#define CMD_REFRESH (1 << 19)
-#define CMD_EMR (0 << 19)
-#define CMD_READ (5 << 19)
-#define CMD_WRITE (4 << 19)
-
-#define SELECT_MR (0 << 16)
-#define SELECT_EMR (1 << 16)
-#define SELECT_EMR2 (2 << 16)
-#define SELECT_EMR3 (3 << 16)
-
-/* MR */
-#define DLL_RESET 0x00000100
-
-#define WRITE_RECOV_2 (1 << 9)
-#define WRITE_RECOV_3 (2 << 9)
-#define WRITE_RECOV_4 (3 << 9)
-#define WRITE_RECOV_5 (4 << 9)
-#define WRITE_RECOV_6 (5 << 9)
-
-#define BURST_LEN_4 0x00000002
-
-/* EMR */
-#define ODT_0_OHM 0x00000000
-#define ODT_50_OHM 0x00000044
-#define ODT_75_OHM 0x00000004
-#define ODT_150_OHM 0x00000040
-
-#define ODS_FULL 0x00000000
-#define ODS_REDUCED 0x00000002
-#define OCD_CALIB_DEF 0x00000380
-
-/* defines for ODT (On Die Termination) of the 440SP(e) DDR2 controller */
-#define ODT_EB0R (0x80000000 >> 8)
-#define ODT_EB0W (0x80000000 >> 7)
-#define CALC_ODT_R(n) (ODT_EB0R << (n << 1))
-#define CALC_ODT_W(n) (ODT_EB0W << (n << 1))
-#define CALC_ODT_RW(n) (CALC_ODT_R(n) | CALC_ODT_W(n))
-
-/* Defines for the Read Cycle Delay test */
-#define NUMMEMTESTS 8
-#define NUMMEMWORDS 8
-#define NUMLOOPS 64 /* memory test loops */
-
-/*
- * Newer PPC's like 440SPe, 460EX/GT can be equipped with more than 2GB of SDRAM.
- * To support such configurations, we "only" map the first 2GB via the TLB's. We
- * need some free virtual address space for the remaining peripherals like, SoC
- * devices, FLASH etc.
- *
- * Note that ECC is currently not supported on configurations with more than 2GB
- * SDRAM. This is because we only map the first 2GB on such systems, and therefore
- * the ECC parity byte of the remaining area can't be written.
- */
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang (void)
-{
- hang ();
-}
-void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-
-/* Private Structure Definitions */
-
-/* enum only to ease code for cas latency setting */
-typedef enum ddr_cas_id {
- DDR_CAS_2 = 20,
- DDR_CAS_2_5 = 25,
- DDR_CAS_3 = 30,
- DDR_CAS_4 = 40,
- DDR_CAS_5 = 50
-} ddr_cas_id_t;
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery);
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery);
-#ifdef CONFIG_DDR_ECC
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value);
-#endif
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks);
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
-static void test(void);
-#else
-static void DQS_calibration_process(void);
-#endif
-#endif
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-static unsigned char spd_read(uchar chip, uint addr)
-{
- unsigned char data[2];
-
- if (i2c_probe(chip) == 0)
- if (i2c_read(chip, addr, 1, data, 1) == 0)
- return data[0];
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440SP Memory Queue and DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned char spd0[MAX_SPD_BYTES];
- unsigned char spd1[MAX_SPD_BYTES];
- unsigned char *dimm_spd[MAXDIMMS];
- unsigned long dimm_populated[MAXDIMMS] = {SDRAM_NONE, SDRAM_NONE};
- unsigned long num_dimm_banks; /* on board dimm banks */
- unsigned long val;
- ddr_cas_id_t selected_cas = DDR_CAS_5; /* preset to silence compiler */
- int write_recovery;
- phys_size_t dram_size = 0;
-
- num_dimm_banks = sizeof(iic0_dimm_addr);
-
- /*------------------------------------------------------------------
- * Set up an array of SPD matrixes.
- *-----------------------------------------------------------------*/
- dimm_spd[0] = spd0;
- dimm_spd[1] = spd1;
-
- /*------------------------------------------------------------------
- * Reset the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdr(SDR0_SRST, (0x80000000 >> 10));
- mtsdr(SDR0_SRST, 0x00000000);
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
-
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the memory type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_mem_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the total rank number.
- *-----------------------------------------------------------------*/
- check_rank_number(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Except Enabling of the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val &
- ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_PMEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_XSRP_MASK |
- SDRAM_MCOPT2_ISIE_MASK))
- | (SDRAM_MCOPT2_SREN_ENTER | SDRAM_MCOPT2_PMEN_DISABLE |
- SDRAM_MCOPT2_IPTR_IDLE | SDRAM_MCOPT2_XSRP_ALLOW |
- SDRAM_MCOPT2_ISIE_ENABLE));
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 1 register
- * Note: Does not enable the memory controller.
- *-----------------------------------------------------------------*/
- program_copt1(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- program_codt(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM refresh register.
- *-----------------------------------------------------------------*/
- program_rtr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM mode register.
- *-----------------------------------------------------------------*/
- program_mode(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- &selected_cas, &write_recovery);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Write Data/DM/DQS Clock Timing Reg
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
-
- /*------------------------------------------------------------------
- * Set the SDRAM Clock Timing Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CLKTR, val);
- mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
- ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
-
- /*------------------------------------------------------------------
- * Program the BxCF registers.
- *-----------------------------------------------------------------*/
- program_bxcf(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM timing registers.
- *-----------------------------------------------------------------*/
- program_tr(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Set the Extended Mode register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MEMODE, val);
- mtsdram(SDRAM_MEMODE,
- (val & ~(SDRAM_MEMODE_DIC_MASK | SDRAM_MEMODE_DLL_MASK |
- SDRAM_MEMODE_RTT_MASK | SDRAM_MEMODE_DQS_MASK)) |
- (SDRAM_MEMODE_DIC_NORMAL | SDRAM_MEMODE_DLL_ENABLE
- | SDRAM_MEMODE_RTT_150OHM | SDRAM_MEMODE_DQS_ENABLE));
-
- /*------------------------------------------------------------------
- * Program Initialization preload registers.
- *-----------------------------------------------------------------*/
- program_initplr(dimm_populated, iic0_dimm_addr, num_dimm_banks,
- selected_cas, write_recovery);
-
- /*------------------------------------------------------------------
- * Delay to ensure 200usec have elapsed since reset.
- *-----------------------------------------------------------------*/
- udelay(400);
-
- /*------------------------------------------------------------------
- * Set the memory queue core base addr.
- *-----------------------------------------------------------------*/
- program_memory_queue(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program SDRAM controller options 2 register
- * Enable the memory controller.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2,
- (val & ~(SDRAM_MCOPT2_SREN_MASK | SDRAM_MCOPT2_DCEN_MASK |
- SDRAM_MCOPT2_IPTR_MASK | SDRAM_MCOPT2_ISIE_MASK)) |
- SDRAM_MCOPT2_IPTR_EXECUTE);
-
- /*------------------------------------------------------------------
- * Wait for IPTR_EXECUTE init sequence to complete.
- *-----------------------------------------------------------------*/
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) == SDRAM_MCSTAT_MIC_NOTCOMP);
-
- /* enable the controller only after init sequence completes */
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, (val | SDRAM_MCOPT2_DCEN_ENABLE));
-
- /* Make sure delay-line calibration is done before proceeding */
- do {
- mfsdram(SDRAM_DLCR, val);
- } while (!(val & SDRAM_DLCR_DLCS_COMPLETE));
-
- /* get installed memory size */
- dram_size = sdram_memsize();
-
- /*
- * Limit size to 2GB
- */
- if (dram_size > CONFIG_MAX_MEM_MAPPED)
- dram_size = CONFIG_MAX_MEM_MAPPED;
-
- /* and program tlb entries for this size (dynamic) */
-
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, dram_size, 0);
-
- /*------------------------------------------------------------------
- * DQS calibration.
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- DQS_autocalibration();
-#else
- program_DQS_calibration(dimm_populated, iic0_dimm_addr, num_dimm_banks);
-#endif
-
-#ifdef CONFIG_DDR_ECC
- /*------------------------------------------------------------------
- * If ecc is enabled, initialize the parity bits.
- *-----------------------------------------------------------------*/
- program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
-#endif
-
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, dram_size);
- program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
-
- ppc4xx_ibm_ddr2_register_dump();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- return sdram_memsize();
-}
-
-static void get_spd_info(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- dimm_found = FALSE;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- debug("\nspd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], num_of_bytes);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- debug("spd_read(0x%x) returned %d\n",
- iic0_dimm_addr[dimm_num], total_size);
-
- if ((num_of_bytes != 0) && (total_size != 0)) {
- dimm_populated[dimm_num] = TRUE;
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated\n", dimm_num);
- } else {
- dimm_populated[dimm_num] = FALSE;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
-
- if (dimm_found == FALSE) {
- printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n");
- spd_ddr_init_hang ();
- }
-}
-
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that they
- * really are DDR specific DIMMs.
- *-----------------------------------------------------------------*/
-static void check_mem_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] == TRUE) {
- dimm_type = spd_read(iic0_dimm_addr[dimm_num], 2);
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode DRAM DIMM detected in "
- "slot %d.\n", (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 2:
- printf("ERROR: EDO DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 4:
- printf("ERROR: SDRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 6:
- printf("ERROR: SGRAM DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- case 7:
- debug("DIMM slot %lu: DDR1 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR1;
- break;
- case 8:
- debug("DIMM slot %lu: DDR2 SDRAM detected\n", dimm_num);
- dimm_populated[dimm_num] = SDRAM_DDR2;
- break;
- default:
- printf("ERROR: Unknown DIMM detected in slot %d.\n",
- (unsigned int)dimm_num);
- printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n");
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
- }
- }
- for (dimm_num = 1; dimm_num < num_dimm_banks; dimm_num++) {
- if ((dimm_populated[dimm_num-1] != SDRAM_NONE)
- && (dimm_populated[dimm_num] != SDRAM_NONE)
- && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) {
- printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long tcyc_reg;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in multiple of 10 picoseconds
- * to match the way DIMM cycle time is calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 100, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- /*
- * Byte 9, Cycle time for CAS Latency=X, is split into two nibbles:
- * the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns;
- * the value presented by the lower order nibble (bits 0-3)
- * has a granularity of .1ns and is added to the value designated
- * by the higher nibble. In addition, four lines of the lower order
- * nibble are assigned to support +.25,+.33, +.66 and +.75.
- */
- /* Convert from hex to decimal */
- if ((tcyc_reg & 0x0F) == 0x0D)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- else if ((tcyc_reg & 0x0F) == 0x0C)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 66;
- else if ((tcyc_reg & 0x0F) == 0x0B)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 33;
- else if ((tcyc_reg & 0x0F) == 0x0A)
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) + 25;
- else
- cycle_time = (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- debug("cycle_time=%lu [10 picoseconds]\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time.
- * The additionnal 100ps is here to accept a small incertainty.
- */
- printf("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)(cycle_time*10),
- (unsigned int)dimm_num,
- (unsigned int)(calc_cycle_time*10));
- printf("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang ();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies two
- * ranks/banks maximum are availables.
- *-----------------------------------------------------------------*/
-static void check_rank_number(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_rank;
- unsigned long total_rank = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- dimm_rank = (dimm_rank & 0x0F) +1;
- else
- dimm_rank = dimm_rank & 0x0F;
-
-
- if (dimm_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with %lu ranks in "
- "slot %lu is not supported.\n", dimm_rank, dimm_num);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- } else
- total_rank += dimm_rank;
- }
- if (total_rank > MAXRANKS) {
- printf("ERROR: DRAM DIMM detected with a total of %d ranks "
- "for all slots.\n", (unsigned int)total_rank);
- printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS);
- printf("Remove one of the DIMM modules.\n\n");
- spd_ddr_init_hang ();
- }
- }
-}
-
-/*------------------------------------------------------------------
- * only support 2.5V modules.
- * This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- switch (voltage_type) {
- case 0x00:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 5.0 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x01:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is LVTTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x02:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 1.5 Volt.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x03:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("This DIMM is 3.3 Volt/TTL.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- case 0x04:
- /* 2.5 Voltage only for DDR1 */
- break;
- case 0x05:
- /* 1.8 Voltage only for DDR2 */
- break;
- default:
- printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n");
- printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n",
- (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- break;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------------+
- * program_copt1.
- *-----------------------------------------------------------------------------*/
-static void program_copt1(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long mcopt1;
- unsigned long ecc_enabled;
- unsigned long ecc = 0;
- unsigned long data_width = 0;
- unsigned long dimm_32bit;
- unsigned long dimm_64bit;
- unsigned long registered = 0;
- unsigned long attribute = 0;
- unsigned long buf0, buf1; /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- unsigned long bankcount;
- unsigned long ddrtype;
- unsigned long val;
-
-#ifdef CONFIG_DDR_ECC
- ecc_enabled = TRUE;
-#else
- ecc_enabled = FALSE;
-#endif
- dimm_32bit = FALSE;
- dimm_64bit = FALSE;
- buf0 = FALSE;
- buf1 = FALSE;
-
- /*------------------------------------------------------------------
- * Set memory controller options reg 1, SDRAM_MCOPT1.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, val);
- mcopt1 = val & ~(SDRAM_MCOPT1_MCHK_MASK | SDRAM_MCOPT1_RDEN_MASK |
- SDRAM_MCOPT1_PMU_MASK | SDRAM_MCOPT1_DMWD_MASK |
- SDRAM_MCOPT1_UIOS_MASK | SDRAM_MCOPT1_BCNT_MASK |
- SDRAM_MCOPT1_DDR_TYPE_MASK | SDRAM_MCOPT1_RWOO_MASK |
- SDRAM_MCOPT1_WOOO_MASK | SDRAM_MCOPT1_DCOO_MASK |
- SDRAM_MCOPT1_DREF_MASK);
-
- mcopt1 |= SDRAM_MCOPT1_QDEP;
- mcopt1 |= SDRAM_MCOPT1_PMU_OPEN;
- mcopt1 |= SDRAM_MCOPT1_RWOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_WOOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DCOO_DISABLED;
- mcopt1 |= SDRAM_MCOPT1_DREF_NORMAL;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- /* test ecc support */
- ecc = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 11);
- if (ecc != 0x02) /* ecc not supported */
- ecc_enabled = FALSE;
-
- /* test bank count */
- bankcount = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 17);
- if (bankcount == 0x04) /* bank count = 4 */
- mcopt1 |= SDRAM_MCOPT1_4_BANKS;
- else /* bank count = 8 */
- mcopt1 |= SDRAM_MCOPT1_8_BANKS;
-
- /* test DDR type */
- ddrtype = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2);
- /* test for buffered/unbuffered, registered, differential clocks */
- registered = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 20);
- attribute = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 21);
-
- /* TODO: code to be changed for IOP1.6 to support 4 DIMMs */
- if (dimm_num == 0) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) { /* DDR2 always buffered */
- /* TODO: what about above comments ? */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- } else {
- /* TODO: the mask 0x02 doesn't match Samsung def for byte 21. */
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf0 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf0 = TRUE;
- }
- }
- }
- else if (dimm_num == 1) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1) /* DDR1 type */
- mcopt1 |= SDRAM_MCOPT1_DDR1_TYPE;
- if (dimm_populated[dimm_num] == SDRAM_DDR2) /* DDR2 type */
- mcopt1 |= SDRAM_MCOPT1_DDR2_TYPE;
- if (registered == 1) {
- /* DDR2 always buffered */
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- } else {
- if ((attribute & 0x02) == 0x00) {
- /* buffered not supported */
- buf1 = FALSE;
- } else {
- mcopt1 |= SDRAM_MCOPT1_RDEN;
- buf1 = TRUE;
- }
- }
- }
-
- /* Note that for DDR2 the byte 7 is reserved, but OK to keep code as is. */
- data_width = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 6) +
- (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 7)) << 8);
-
- switch (data_width) {
- case 72:
- case 64:
- dimm_64bit = TRUE;
- break;
- case 40:
- case 32:
- dimm_32bit = TRUE;
- break;
- default:
- printf("WARNING: Detected a DIMM with a data width of %lu bits.\n",
- data_width);
- printf("Only DIMMs with 32 or 64 bit DDR-SDRAM widths are supported.\n");
- break;
- }
- }
- }
-
- /* verify matching properties */
- if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) {
- if (buf0 != buf1) {
- printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) {
- printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n");
- spd_ddr_init_hang ();
- }
- else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_64;
- } else if ((dimm_64bit == FALSE) && (dimm_32bit == TRUE)) {
- mcopt1 |= SDRAM_MCOPT1_DMWD_32;
- } else {
- printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
-
- if (ecc_enabled == TRUE)
- mcopt1 |= SDRAM_MCOPT1_MCHK_GEN;
- else
- mcopt1 |= SDRAM_MCOPT1_MCHK_NON;
-
- mtsdram(SDRAM_MCOPT1, mcopt1);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_codt.
- *-----------------------------------------------------------------------------*/
-static void program_codt(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long codt;
- unsigned long modt0 = 0;
- unsigned long modt1 = 0;
- unsigned long modt2 = 0;
- unsigned long modt3 = 0;
- unsigned char dimm_num;
- unsigned char dimm_rank;
- unsigned char total_rank = 0;
- unsigned char total_dimm = 0;
- unsigned char dimm_type = 0;
- unsigned char firstSlot = 0;
-
- /*------------------------------------------------------------------
- * Set the SDRAM Controller On Die Termination Register
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_CODT, codt);
- codt &= ~(SDRAM_CODT_DQS_SINGLE_END | SDRAM_CODT_CKSE_SINGLE_END);
- codt |= SDRAM_CODT_IO_NMODE;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- dimm_rank = (unsigned long)spd_read(iic0_dimm_addr[dimm_num], 5);
- if (((unsigned long)spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08) {
- dimm_rank = (dimm_rank & 0x0F) + 1;
- dimm_type = SDRAM_DDR2;
- } else {
- dimm_rank = dimm_rank & 0x0F;
- dimm_type = SDRAM_DDR1;
- }
-
- total_rank += dimm_rank;
- total_dimm++;
- if ((dimm_num == 0) && (total_dimm == 1))
- firstSlot = TRUE;
- else
- firstSlot = FALSE;
- }
- }
- if (dimm_type == SDRAM_DDR2) {
- codt |= SDRAM_CODT_DQS_1_8_V_DDR2;
- if ((total_dimm == 1) && (firstSlot == TRUE)) {
- if (total_rank == 1) { /* PUUU */
- codt |= CALC_ODT_R(0);
- modt0 = CALC_ODT_W(0);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* PPUU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1);
- modt0 = CALC_ODT_W(0) | CALC_ODT_W(1);
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
- }
- } else if ((total_dimm == 1) && (firstSlot != TRUE)) {
- if (total_rank == 1) { /* UUPU */
- codt |= CALC_ODT_R(2);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2);
- modt3 = 0x00000000;
- }
- if (total_rank == 2) { /* UUPP */
- codt |= CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = CALC_ODT_W(2) | CALC_ODT_W(3);
- modt3 = 0x00000000;
- }
- }
- if (total_dimm == 2) {
- if (total_rank == 2) { /* PUPU */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(2);
- modt0 = CALC_ODT_RW(2);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0);
- modt3 = 0x00000000;
- }
- if (total_rank == 4) { /* PPPP */
- codt |= CALC_ODT_R(0) | CALC_ODT_R(1) |
- CALC_ODT_R(2) | CALC_ODT_R(3);
- modt0 = CALC_ODT_RW(2) | CALC_ODT_RW(3);
- modt1 = 0x00000000;
- modt2 = CALC_ODT_RW(0) | CALC_ODT_RW(1);
- modt3 = 0x00000000;
- }
- }
- } else {
- codt |= SDRAM_CODT_DQS_2_5_V_DDR1;
- modt0 = 0x00000000;
- modt1 = 0x00000000;
- modt2 = 0x00000000;
- modt3 = 0x00000000;
-
- if (total_dimm == 1) {
- if (total_rank == 1)
- codt |= 0x00800000;
- if (total_rank == 2)
- codt |= 0x02800000;
- }
- if (total_dimm == 2) {
- if (total_rank == 2)
- codt |= 0x08800000;
- if (total_rank == 4)
- codt |= 0x2a800000;
- }
- }
-
- debug("nb of dimm %d\n", total_dimm);
- debug("nb of rank %d\n", total_rank);
- if (total_dimm == 1)
- debug("dimm in slot %d\n", firstSlot);
-
- mtsdram(SDRAM_CODT, codt);
- mtsdram(SDRAM_MODT0, modt0);
- mtsdram(SDRAM_MODT1, modt1);
- mtsdram(SDRAM_MODT2, modt2);
- mtsdram(SDRAM_MODT3, modt3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_initplr.
- *-----------------------------------------------------------------------------*/
-static void program_initplr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t selected_cas,
- int write_recovery)
-{
- u32 cas = 0;
- u32 odt = 0;
- u32 ods = 0;
- u32 mr;
- u32 wr;
- u32 emr;
- u32 emr2;
- u32 emr3;
- int dimm_num;
- int total_dimm = 0;
-
- /******************************************************
- ** Assumption: if more than one DIMM, all DIMMs are the same
- ** as already checked in check_memory_type
- ******************************************************/
-
- if ((dimm_populated[0] == SDRAM_DDR1) || (dimm_populated[1] == SDRAM_DDR1)) {
- mtsdram(SDRAM_INITPLR0, 0x81B80000);
- mtsdram(SDRAM_INITPLR1, 0x81900400);
- mtsdram(SDRAM_INITPLR2, 0x81810000);
- mtsdram(SDRAM_INITPLR3, 0xff800162);
- mtsdram(SDRAM_INITPLR4, 0x81900400);
- mtsdram(SDRAM_INITPLR5, 0x86080000);
- mtsdram(SDRAM_INITPLR6, 0x86080000);
- mtsdram(SDRAM_INITPLR7, 0x81000062);
- } else if ((dimm_populated[0] == SDRAM_DDR2) || (dimm_populated[1] == SDRAM_DDR2)) {
- switch (selected_cas) {
- case DDR_CAS_3:
- cas = 3 << 4;
- break;
- case DDR_CAS_4:
- cas = 4 << 4;
- break;
- case DDR_CAS_5:
- cas = 5 << 4;
- break;
- default:
- printf("ERROR: ucode error on selected_cas value %d", selected_cas);
- spd_ddr_init_hang ();
- break;
- }
-
-#if 0
- /*
- * ToDo - Still a problem with the write recovery:
- * On the Corsair CM2X512-5400C4 module, setting write recovery
- * in the INITPLR reg to the value calculated in program_mode()
- * results in not correctly working DDR2 memory (crash after
- * relocation).
- *
- * So for now, set the write recovery to 3. This seems to work
- * on the Corair module too.
- *
- * 2007-03-01, sr
- */
- switch (write_recovery) {
- case 3:
- wr = WRITE_RECOV_3;
- break;
- case 4:
- wr = WRITE_RECOV_4;
- break;
- case 5:
- wr = WRITE_RECOV_5;
- break;
- case 6:
- wr = WRITE_RECOV_6;
- break;
- default:
- printf("ERROR: write recovery not support (%d)", write_recovery);
- spd_ddr_init_hang ();
- break;
- }
-#else
- wr = WRITE_RECOV_3; /* test-only, see description above */
-#endif
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++)
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- total_dimm++;
- if (total_dimm == 1) {
- odt = ODT_150_OHM;
- ods = ODS_FULL;
- } else if (total_dimm == 2) {
- odt = ODT_75_OHM;
- ods = ODS_REDUCED;
- } else {
- printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm);
- spd_ddr_init_hang ();
- }
-
- mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas;
- emr = CMD_EMR | SELECT_EMR | odt | ods;
- emr2 = CMD_EMR | SELECT_EMR2;
- emr3 = CMD_EMR | SELECT_EMR3;
- /* NOP - Wait 106 MemClk cycles */
- mtsdram(SDRAM_INITPLR0, SDRAM_INITPLR_ENABLE | CMD_NOP |
- SDRAM_INITPLR_IMWT_ENCODE(106));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR1, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* EMR2 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR2, SDRAM_INITPLR_ENABLE | emr2 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR3 - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR3, SDRAM_INITPLR_ENABLE | emr3 |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR DLL ENABLE - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR4, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* MR w/ DLL reset - 200 cycle wait for DLL reset */
- mtsdram(SDRAM_INITPLR5, SDRAM_INITPLR_ENABLE | mr | DLL_RESET |
- SDRAM_INITPLR_IMWT_ENCODE(200));
- udelay(1000);
- /* precharge 4 MemClk cycles */
- mtsdram(SDRAM_INITPLR6, SDRAM_INITPLR_ENABLE | CMD_PRECHARGE |
- SDRAM_INITPLR_IMWT_ENCODE(4));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR7, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR8, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR9, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* Refresh 25 MemClk cycles */
- mtsdram(SDRAM_INITPLR10, SDRAM_INITPLR_ENABLE | CMD_REFRESH |
- SDRAM_INITPLR_IMWT_ENCODE(25));
- /* MR w/o DLL reset - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR11, SDRAM_INITPLR_ENABLE | mr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- /* EMR OCD Default - Wait tMRD (2 MemClk cycles) */
- mtsdram(SDRAM_INITPLR12, SDRAM_INITPLR_ENABLE | OCD_CALIB_DEF |
- SDRAM_INITPLR_IMWT_ENCODE(2) | emr);
- /* EMR OCD Exit */
- mtsdram(SDRAM_INITPLR13, SDRAM_INITPLR_ENABLE | emr |
- SDRAM_INITPLR_IMWT_ENCODE(2));
- } else {
- printf("ERROR: ucode error as unknown DDR type in program_initplr");
- spd_ddr_init_hang ();
- }
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_MMODE register.
- * the selected_cas is an output parameter, that will be passed
- * by caller to call the above program_initplr( )
- *-----------------------------------------------------------------*/
-static void program_mode(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- ddr_cas_id_t *selected_cas,
- int *write_recovery)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_wr_ns;
- unsigned long t_wr_clk;
- unsigned long cas_bit;
- unsigned long cas_index;
- unsigned long sdram_freq;
- unsigned long ddr_check;
- unsigned long mmode;
- unsigned long tcyc_reg;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_2_5_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ns_x_100;
- unsigned long max_2_5_tcyc_ns_x_100;
- unsigned long max_3_0_tcyc_ns_x_100;
- unsigned long max_4_0_tcyc_ns_x_100;
- unsigned long max_5_0_tcyc_ns_x_100;
- unsigned long cycle_time_ns_x_100[3];
- PPC4xx_SYS_INFO board_cfg;
- unsigned char cas_2_0_available;
- unsigned char cas_2_5_available;
- unsigned char cas_3_0_available;
- unsigned char cas_4_0_available;
- unsigned char cas_5_0_available;
- unsigned long sdr_ddrpll;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = MULDIV64((board_cfg.freqPLB), SDR0_DDR0_DDRM_DECODE(sdr_ddrpll), 1);
- debug("sdram_freq=%lu\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_wr_ns = 0;
- cas_2_0_available = TRUE;
- cas_2_5_available = TRUE;
- cas_3_0_available = TRUE;
- cas_4_0_available = TRUE;
- cas_5_0_available = TRUE;
- max_2_0_tcyc_ns_x_100 = 10;
- max_2_5_tcyc_ns_x_100 = 10;
- max_3_0_tcyc_ns_x_100 = 10;
- max_4_0_tcyc_ns_x_100 = 10;
- max_5_0_tcyc_ns_x_100 = 10;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR1)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- /* t_wr_ns = max(t_wr_ns, (unsigned long)dimm_spd[dimm_num][36] >> 2); */ /* not used in this loop. */
- cas_bit = spd_read(iic0_dimm_addr[dimm_num], 18);
- debug("cas_bit[SPD byte 18]=%02lx\n", cas_bit);
-
- /* For a particular DIMM, grab the three CAS values it supports */
- for (cas_index = 0; cas_index < 3; cas_index++) {
- switch (cas_index) {
- case 0:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 9);
- break;
- case 1:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 23);
- break;
- default:
- tcyc_reg = spd_read(iic0_dimm_addr[dimm_num], 25);
- break;
- }
-
- if ((tcyc_reg & 0x0F) >= 10) {
- if ((tcyc_reg & 0x0F) == 0x0D) {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) + 75;
- } else {
- printf("ERROR: SPD reported Tcyc is incorrect for DIMM "
- "in slot %d\n", (unsigned int)dimm_num);
- spd_ddr_init_hang ();
- }
- } else {
- /* Convert from hex to decimal */
- cycle_time_ns_x_100[cas_index] =
- (((tcyc_reg & 0xF0) >> 4) * 100) +
- ((tcyc_reg & 0x0F)*10);
- }
- debug("cas_index=%lu: cycle_time_ns_x_100=%lu\n", cas_index,
- cycle_time_ns_x_100[cas_index]);
- }
-
- /* The rest of this routine determines if CAS 2.0, 2.5, 3.0, 4.0 and 5.0 are */
- /* supported for a particular DIMM. */
- cas_index = 0;
-
- if (sdram_ddr1) {
- /*
- * DDR devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 4.0 3.5 3.0 2.5 2.0 1.5 1.0
- */
- if (((cas_bit & 0x40) == 0x40) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_5_tcyc_ns_x_100 = max(max_2_5_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_5_available = FALSE;
- }
-
- if (((cas_bit & 0x04) == 0x04) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_2_0_tcyc_ns_x_100 = max(max_2_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_2_0_available = FALSE;
- }
- } else {
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- if (((cas_bit & 0x20) == 0x20) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_5_0_tcyc_ns_x_100 = max(max_5_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_5_0_available = FALSE;
- }
-
- if (((cas_bit & 0x10) == 0x10) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_4_0_tcyc_ns_x_100 = max(max_4_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_4_0_available = FALSE;
- }
-
- if (((cas_bit & 0x08) == 0x08) && (cas_index < 3) &&
- (cycle_time_ns_x_100[cas_index] != 0)) {
- max_3_0_tcyc_ns_x_100 = max(max_3_0_tcyc_ns_x_100,
- cycle_time_ns_x_100[cas_index]);
- cas_index++;
- } else {
- if (cas_index != 0)
- cas_index++;
- cas_3_0_available = FALSE;
- }
- }
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MMODE, mmode);
- mmode = mmode & ~(SDRAM_MMODE_WR_MASK | SDRAM_MMODE_DCL_MASK);
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 100, max_2_0_tcyc_ns_x_100) + 10;
- cycle_2_5_clk = MULDIV64(ONE_BILLION, 100, max_2_5_tcyc_ns_x_100) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 100, max_3_0_tcyc_ns_x_100) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 100, max_4_0_tcyc_ns_x_100) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 100, max_5_0_tcyc_ns_x_100) + 10;
- debug("cycle_3_0_clk=%lu\n", cycle_3_0_clk);
- debug("cycle_4_0_clk=%lu\n", cycle_4_0_clk);
- debug("cycle_5_0_clk=%lu\n", cycle_5_0_clk);
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if ((cas_2_0_available == TRUE) && (sdram_freq <= cycle_2_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_0_CLK;
- *selected_cas = DDR_CAS_2;
- } else if ((cas_2_5_available == TRUE) && (sdram_freq <= cycle_2_5_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_2_5_CLK;
- *selected_cas = DDR_CAS_2_5;
- } else if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR1_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n");
- spd_ddr_init_hang ();
- }
- } else { /* DDR2 */
- debug("cas_3_0_available=%d\n", cas_3_0_available);
- debug("cas_4_0_available=%d\n", cas_4_0_available);
- debug("cas_5_0_available=%d\n", cas_5_0_available);
- if ((cas_3_0_available == TRUE) && (sdram_freq <= cycle_3_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_3_0_CLK;
- *selected_cas = DDR_CAS_3;
- } else if ((cas_4_0_available == TRUE) && (sdram_freq <= cycle_4_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_4_0_CLK;
- *selected_cas = DDR_CAS_4;
- } else if ((cas_5_0_available == TRUE) && (sdram_freq <= cycle_5_0_clk)) {
- mmode |= SDRAM_MMODE_DCL_DDR2_5_0_CLK;
- *selected_cas = DDR_CAS_5;
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n");
- printf("Only DIMMs DDR2 with CAS latencies of 3.0, 4.0, and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range of the DIMMs.\n");
- printf("cas3=%d cas4=%d cas5=%d\n",
- cas_3_0_available, cas_4_0_available, cas_5_0_available);
- printf("sdram_freq=%lu cycle3=%lu cycle4=%lu cycle5=%lu\n\n",
- sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang ();
- }
- }
-
- if (sdram_ddr1 == TRUE)
- mmode |= SDRAM_MMODE_WR_DDR1;
- else {
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- t_wr_ns = max(t_wr_ns,
- spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wr_clk = MULDIV64(sdram_freq, t_wr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wr_clk, t_wr_ns);
- if (sdram_freq != ddr_check)
- t_wr_clk++;
-
- switch (t_wr_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- mmode |= SDRAM_MMODE_WR_DDR2_3_CYC;
- break;
- case 4:
- mmode |= SDRAM_MMODE_WR_DDR2_4_CYC;
- break;
- case 5:
- mmode |= SDRAM_MMODE_WR_DDR2_5_CYC;
- break;
- default:
- mmode |= SDRAM_MMODE_WR_DDR2_6_CYC;
- break;
- }
- *write_recovery = t_wr_clk;
- }
-
- debug("CAS latency = %d\n", *selected_cas);
- debug("Write recovery = %d\n", *write_recovery);
-
- mtsdram(SDRAM_MMODE, mmode);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_rtr.
- *-----------------------------------------------------------------------------*/
-static void program_rtr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- PPC4xx_SYS_INFO board_cfg;
- unsigned long max_refresh_rate;
- unsigned long dimm_num;
- unsigned long refresh_rate_type;
- unsigned long refresh_rate;
- unsigned long rint;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
- unsigned long val;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Refresh Timing Register, SDRAM_RTR
- *-----------------------------------------------------------------*/
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- max_refresh_rate = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
-
- refresh_rate_type = spd_read(iic0_dimm_addr[dimm_num], 12);
- refresh_rate_type &= 0x7F;
- switch (refresh_rate_type) {
- case 0:
- refresh_rate = 15625;
- break;
- case 1:
- refresh_rate = 3906;
- break;
- case 2:
- refresh_rate = 7812;
- break;
- case 3:
- refresh_rate = 31250;
- break;
- case 4:
- refresh_rate = 62500;
- break;
- case 5:
- refresh_rate = 125000;
- break;
- default:
- refresh_rate = 0;
- printf("ERROR: DIMM %d unsupported refresh rate/type.\n",
- (unsigned int)dimm_num);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- break;
- }
-
- max_refresh_rate = max(max_refresh_rate, refresh_rate);
- }
- }
-
- rint = MULDIV64(sdram_freq, max_refresh_rate, ONE_BILLION);
- mfsdram(SDRAM_RTR, val);
- mtsdram(SDRAM_RTR, (val & ~SDRAM_RTR_RINT_MASK) |
- (SDRAM_RTR_RINT_ENCODE(rint)));
-}
-
-/*------------------------------------------------------------------
- * This routine programs the SDRAM_TRx registers.
- *-----------------------------------------------------------------*/
-static void program_tr(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long sdram_ddr1;
- unsigned long t_rp_ns;
- unsigned long t_rcd_ns;
- unsigned long t_rrd_ns;
- unsigned long t_ras_ns;
- unsigned long t_rc_ns;
- unsigned long t_rfc_ns;
- unsigned long t_wpc_ns;
- unsigned long t_wtr_ns;
- unsigned long t_rpc_ns;
- unsigned long t_rp_clk;
- unsigned long t_rcd_clk;
- unsigned long t_rrd_clk;
- unsigned long t_ras_clk;
- unsigned long t_rc_clk;
- unsigned long t_rfc_clk;
- unsigned long t_wpc_clk;
- unsigned long t_wtr_clk;
- unsigned long t_rpc_clk;
- unsigned long sdtr1, sdtr2, sdtr3;
- unsigned long ddr_check;
- unsigned long sdram_freq;
- unsigned long sdr_ddrpll;
-
- PPC4xx_SYS_INFO board_cfg;
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- get_sys_info(&board_cfg);
-
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sdram_freq = ((board_cfg.freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- t_rp_ns = 0;
- t_rrd_ns = 0;
- t_rcd_ns = 0;
- t_ras_ns = 0;
- t_rc_ns = 0;
- t_rfc_ns = 0;
- t_wpc_ns = 0;
- t_wtr_ns = 0;
- t_rpc_ns = 0;
- sdram_ddr1 = TRUE;
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- if (dimm_populated[dimm_num] == SDRAM_DDR2)
- sdram_ddr1 = TRUE;
- else
- sdram_ddr1 = FALSE;
-
- t_rcd_ns = max(t_rcd_ns, spd_read(iic0_dimm_addr[dimm_num], 29) >> 2);
- t_rrd_ns = max(t_rrd_ns, spd_read(iic0_dimm_addr[dimm_num], 28) >> 2);
- t_rp_ns = max(t_rp_ns, spd_read(iic0_dimm_addr[dimm_num], 27) >> 2);
- t_ras_ns = max(t_ras_ns, spd_read(iic0_dimm_addr[dimm_num], 30));
- t_rc_ns = max(t_rc_ns, spd_read(iic0_dimm_addr[dimm_num], 41));
- t_rfc_ns = max(t_rfc_ns, spd_read(iic0_dimm_addr[dimm_num], 42));
- }
- }
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 1, SDRAM_TR1
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR1, sdtr1);
- sdtr1 &= ~(SDRAM_SDTR1_LDOF_MASK | SDRAM_SDTR1_RTW_MASK |
- SDRAM_SDTR1_WTWO_MASK | SDRAM_SDTR1_RTRO_MASK);
-
- /* default values */
- sdtr1 |= SDRAM_SDTR1_LDOF_2_CLK;
- sdtr1 |= SDRAM_SDTR1_RTW_2_CLK;
-
- /* normal operations */
- sdtr1 |= SDRAM_SDTR1_WTWO_0_CLK;
- sdtr1 |= SDRAM_SDTR1_RTRO_1_CLK;
-
- mtsdram(SDRAM_SDTR1, sdtr1);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 2, SDRAM_TR2
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR2, sdtr2);
- sdtr2 &= ~(SDRAM_SDTR2_RCD_MASK | SDRAM_SDTR2_WTR_MASK |
- SDRAM_SDTR2_XSNR_MASK | SDRAM_SDTR2_WPC_MASK |
- SDRAM_SDTR2_RPC_MASK | SDRAM_SDTR2_RP_MASK |
- SDRAM_SDTR2_RRD_MASK);
-
- /*
- * convert t_rcd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rcd_clk = MULDIV64(sdram_freq, t_rcd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rcd_clk, t_rcd_ns);
- if (sdram_freq != ddr_check)
- t_rcd_clk++;
-
- switch (t_rcd_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_RCD_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_RCD_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RCD_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RCD_4_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RCD_5_CLK;
- break;
- }
-
- if (sdram_ddr1 == TRUE) { /* DDR1 */
- if (sdram_freq < 200000000) {
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- } else {
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- }
- } else { /* DDR2 */
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- t_wpc_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 36) >> 2);
- t_wtr_ns = max(t_wtr_ns, spd_read(iic0_dimm_addr[dimm_num], 37) >> 2);
- t_rpc_ns = max(t_rpc_ns, spd_read(iic0_dimm_addr[dimm_num], 38) >> 2);
- }
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wpc_clk = MULDIV64(sdram_freq, t_wpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wpc_clk, t_wpc_ns);
- if (sdram_freq != ddr_check)
- t_wpc_clk++;
-
- switch (t_wpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_WPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WPC_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_WPC_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_WPC_5_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WPC_6_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_wtr_clk = MULDIV64(sdram_freq, t_wtr_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_wtr_clk, t_wtr_ns);
- if (sdram_freq != ddr_check)
- t_wtr_clk++;
-
- switch (t_wtr_clk) {
- case 0:
- case 1:
- sdtr2 |= SDRAM_SDTR2_WTR_1_CLK;
- break;
- case 2:
- sdtr2 |= SDRAM_SDTR2_WTR_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_WTR_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_WTR_4_CLK;
- break;
- }
-
- /*
- * convert from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rpc_clk = MULDIV64(sdram_freq, t_rpc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rpc_clk, t_rpc_ns);
- if (sdram_freq != ddr_check)
- t_rpc_clk++;
-
- switch (t_rpc_clk) {
- case 0:
- case 1:
- case 2:
- sdtr2 |= SDRAM_SDTR2_RPC_2_CLK;
- break;
- case 3:
- sdtr2 |= SDRAM_SDTR2_RPC_3_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RPC_4_CLK;
- break;
- }
- }
-
- /* default value */
- sdtr2 |= SDRAM_SDTR2_XSNR_16_CLK;
-
- /*
- * convert t_rrd from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rrd_clk = MULDIV64(sdram_freq, t_rrd_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rrd_clk, t_rrd_ns);
- if (sdram_freq != ddr_check)
- t_rrd_clk++;
-
- if (t_rrd_clk == 3)
- sdtr2 |= SDRAM_SDTR2_RRD_3_CLK;
- else
- sdtr2 |= SDRAM_SDTR2_RRD_2_CLK;
-
- /*
- * convert t_rp from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rp_clk = MULDIV64(sdram_freq, t_rp_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rp_clk, t_rp_ns);
- if (sdram_freq != ddr_check)
- t_rp_clk++;
-
- switch (t_rp_clk) {
- case 0:
- case 1:
- case 2:
- case 3:
- sdtr2 |= SDRAM_SDTR2_RP_3_CLK;
- break;
- case 4:
- sdtr2 |= SDRAM_SDTR2_RP_4_CLK;
- break;
- case 5:
- sdtr2 |= SDRAM_SDTR2_RP_5_CLK;
- break;
- case 6:
- sdtr2 |= SDRAM_SDTR2_RP_6_CLK;
- break;
- default:
- sdtr2 |= SDRAM_SDTR2_RP_7_CLK;
- break;
- }
-
- mtsdram(SDRAM_SDTR2, sdtr2);
-
- /*------------------------------------------------------------------
- * Set the SDRAM Timing Reg 3, SDRAM_TR3
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_SDTR3, sdtr3);
- sdtr3 &= ~(SDRAM_SDTR3_RAS_MASK | SDRAM_SDTR3_RC_MASK |
- SDRAM_SDTR3_XCS_MASK | SDRAM_SDTR3_RFC_MASK);
-
- /*
- * convert t_ras from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_ras_clk = MULDIV64(sdram_freq, t_ras_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_ras_clk, t_ras_ns);
- if (sdram_freq != ddr_check)
- t_ras_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RAS_ENCODE(t_ras_clk);
-
- /*
- * convert t_rc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rc_clk = MULDIV64(sdram_freq, t_rc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rc_clk, t_rc_ns);
- if (sdram_freq != ddr_check)
- t_rc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RC_ENCODE(t_rc_clk);
-
- /* default xcs value */
- sdtr3 |= SDRAM_SDTR3_XCS;
-
- /*
- * convert t_rfc from nanoseconds to ddr clocks
- * round up if necessary
- */
- t_rfc_clk = MULDIV64(sdram_freq, t_rfc_ns, ONE_BILLION);
- ddr_check = MULDIV64(ONE_BILLION, t_rfc_clk, t_rfc_ns);
- if (sdram_freq != ddr_check)
- t_rfc_clk++;
-
- sdtr3 |= SDRAM_SDTR3_RFC_ENCODE(t_rfc_clk);
-
- mtsdram(SDRAM_SDTR3, sdtr3);
-}
-
-/*-----------------------------------------------------------------------------+
- * program_bxcf.
- *-----------------------------------------------------------------------------*/
-static void program_bxcf(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long num_col_addr;
- unsigned long num_ranks;
- unsigned long num_banks;
- unsigned long mode;
- unsigned long ind_rank;
- unsigned long ind;
- unsigned long ind_bank;
- unsigned long bank_0_populated;
-
- /*------------------------------------------------------------------
- * Set the BxCF regs. First, wipe out the bank config registers.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MB0CF, 0x00000000);
- mtsdram(SDRAM_MB1CF, 0x00000000);
- mtsdram(SDRAM_MB2CF, 0x00000000);
- mtsdram(SDRAM_MB3CF, 0x00000000);
-
- mode = SDRAM_BXCF_M_BE_ENABLE;
-
- bank_0_populated = 0;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_col_addr = spd_read(iic0_dimm_addr[dimm_num], 4);
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) +1;
- else
- num_ranks = num_ranks & 0x0F;
-
- num_banks = spd_read(iic0_dimm_addr[dimm_num], 17);
-
- for (ind_bank = 0; ind_bank < 2; ind_bank++) {
- if (num_banks == 4)
- ind = 0;
- else
- ind = 5 << 8;
- switch (num_col_addr) {
- case 0x08:
- mode |= (SDRAM_BXCF_M_AM_0 + ind);
- break;
- case 0x09:
- mode |= (SDRAM_BXCF_M_AM_1 + ind);
- break;
- case 0x0A:
- mode |= (SDRAM_BXCF_M_AM_2 + ind);
- break;
- case 0x0B:
- mode |= (SDRAM_BXCF_M_AM_3 + ind);
- break;
- case 0x0C:
- mode |= (SDRAM_BXCF_M_AM_4 + ind);
- break;
- default:
- printf("DDR-SDRAM: DIMM %d BxCF configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for number of "
- "column addresses: %d.\n", (unsigned int)num_col_addr);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- }
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE)&& (dimm_num ==1))
- bank_0_populated = 1;
-
- for (ind_rank = 0; ind_rank < num_ranks; ind_rank++) {
- mtsdram(SDRAM_MB0CF +
- ((dimm_num + bank_0_populated + ind_rank) << 2),
- mode);
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * program memory queue.
- *-----------------------------------------------------------------*/
-static void program_memory_queue(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- phys_size_t rank_base_addr;
- unsigned long rank_reg;
- phys_size_t rank_size_bytes;
- unsigned long rank_size_id;
- unsigned long num_ranks;
- unsigned long baseadd_size;
- unsigned long i;
- unsigned long bank_0_populated = 0;
- phys_size_t total_size = 0;
-
- /*------------------------------------------------------------------
- * Reset the rank_base_address.
- *-----------------------------------------------------------------*/
- rank_reg = SDRAM_R0BAS;
-
- rank_base_addr = 0x00000000;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_populated[dimm_num] != SDRAM_NONE) {
- num_ranks = spd_read(iic0_dimm_addr[dimm_num], 5);
- if ((spd_read(iic0_dimm_addr[dimm_num], 2)) == 0x08)
- num_ranks = (num_ranks & 0x0F) + 1;
- else
- num_ranks = num_ranks & 0x0F;
-
- rank_size_id = spd_read(iic0_dimm_addr[dimm_num], 31);
-
- /*------------------------------------------------------------------
- * Set the sizes
- *-----------------------------------------------------------------*/
- baseadd_size = 0;
- switch (rank_size_id) {
- case 0x01:
- baseadd_size |= SDRAM_RXBAS_SDSZ_1024;
- total_size = 1024;
- break;
- case 0x02:
- baseadd_size |= SDRAM_RXBAS_SDSZ_2048;
- total_size = 2048;
- break;
- case 0x04:
- baseadd_size |= SDRAM_RXBAS_SDSZ_4096;
- total_size = 4096;
- break;
- case 0x08:
- baseadd_size |= SDRAM_RXBAS_SDSZ_32;
- total_size = 32;
- break;
- case 0x10:
- baseadd_size |= SDRAM_RXBAS_SDSZ_64;
- total_size = 64;
- break;
- case 0x20:
- baseadd_size |= SDRAM_RXBAS_SDSZ_128;
- total_size = 128;
- break;
- case 0x40:
- baseadd_size |= SDRAM_RXBAS_SDSZ_256;
- total_size = 256;
- break;
- case 0x80:
- baseadd_size |= SDRAM_RXBAS_SDSZ_512;
- total_size = 512;
- break;
- default:
- printf("DDR-SDRAM: DIMM %d memory queue configuration.\n",
- (unsigned int)dimm_num);
- printf("ERROR: Unsupported value for the banksize: %d.\n",
- (unsigned int)rank_size_id);
- printf("Replace the DIMM module with a supported DIMM.\n\n");
- spd_ddr_init_hang ();
- }
- rank_size_bytes = total_size << 20;
-
- if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1))
- bank_0_populated = 1;
-
- for (i = 0; i < num_ranks; i++) {
- mtdcr_any(rank_reg+i+dimm_num+bank_0_populated,
- (SDRAM_RXBAS_SDBA_ENCODE(rank_base_addr) |
- baseadd_size));
- rank_base_addr += rank_size_bytes;
- }
- }
- }
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Enable high bandwidth access
- * This is currently not used, but with this setup
- * it is possible to use it later on in e.g. the Linux
- * EMAC driver for performance gain.
- */
- mtdcr(SDRAM_PLBADDULL, 0x00000000); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, 0x00000008); /* MQ0_BAUH */
-
- /*
- * Set optimal value for Memory Queue HB/LL Configuration registers
- */
- mtdcr(SDRAM_CONF1HB, (mfdcr(SDRAM_CONF1HB) & ~SDRAM_CONF1HB_MASK) |
- SDRAM_CONF1HB_AAFR | SDRAM_CONF1HB_RPEN | SDRAM_CONF1HB_RFTE |
- SDRAM_CONF1HB_RPLM | SDRAM_CONF1HB_WRCL);
- mtdcr(SDRAM_CONF1LL, (mfdcr(SDRAM_CONF1LL) & ~SDRAM_CONF1LL_MASK) |
- SDRAM_CONF1LL_AAFR | SDRAM_CONF1LL_RPEN | SDRAM_CONF1LL_RFTE |
- SDRAM_CONF1LL_RPLM);
- mtdcr(SDRAM_CONFPATHB, mfdcr(SDRAM_CONFPATHB) | SDRAM_CONFPATHB_TPEN);
-#endif
-}
-
-#ifdef CONFIG_DDR_ECC
-/*-----------------------------------------------------------------------------+
- * program_ecc.
- *-----------------------------------------------------------------------------*/
-static void program_ecc(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks,
- unsigned long tlb_word2_i_value)
-{
- unsigned long dimm_num;
- unsigned long ecc;
-
- ecc = 0;
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_populated[dimm_num] != SDRAM_NONE)
- ecc = max(ecc, spd_read(iic0_dimm_addr[dimm_num], 11));
- }
- if (ecc == 0)
- return;
-
- do_program_ecc(tlb_word2_i_value);
-}
-#endif
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-/*-----------------------------------------------------------------------------+
- * program_DQS_calibration.
- *-----------------------------------------------------------------------------*/
-static void program_DQS_calibration(unsigned long *dimm_populated,
- unsigned char *iic0_dimm_addr,
- unsigned long num_dimm_banks)
-{
- unsigned long val;
-
-#ifdef HARD_CODED_DQS /* calibration test with hardvalues */
- mtsdram(SDRAM_RQDC, 0x80000037);
- mtsdram(SDRAM_RDCC, 0x40000000);
- mtsdram(SDRAM_RFDC, 0x000001DF);
-
- test();
-#else
- /*------------------------------------------------------------------
- * Program RDCC register
- * Read sample cycle auto-update enable
- *-----------------------------------------------------------------*/
-
- mfsdram(SDRAM_RDCC, val);
- mtsdram(SDRAM_RDCC,
- (val & ~(SDRAM_RDCC_RDSS_MASK | SDRAM_RDCC_RSAE_MASK))
- | SDRAM_RDCC_RSAE_ENABLE);
-
- /*------------------------------------------------------------------
- * Program RQDC register
- * Internal DQS delay mechanism enable
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, (SDRAM_RQDC_RQDE_ENABLE|SDRAM_RQDC_RQFD_ENCODE(0x38)));
-
- /*------------------------------------------------------------------
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- * Set RFOS to 1/4 of memclk cycle (0x3f)
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_RFDC, val);
- mtsdram(SDRAM_RFDC,
- (val & ~(SDRAM_RFDC_ARSE_MASK | SDRAM_RFDC_RFOS_MASK |
- SDRAM_RFDC_RFFD_MASK))
- | (SDRAM_RFDC_ARSE_ENABLE | SDRAM_RFDC_RFOS_ENCODE(0x3f) |
- SDRAM_RFDC_RFFD_ENCODE(0)));
-
- DQS_calibration_process();
-#endif
-}
-
-static int short_mem_test(void)
-{
- u32 *membase;
- u32 bxcr_num;
- u32 bxcf;
- int i;
- int j;
- phys_size_t base_addr;
- u32 test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
- int l;
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf);
-
- /* Banks enabled */
- if ((bxcf & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
- /* Bank is enabled */
-
- /*
- * Only run test on accessable memory (below 2GB)
- */
- base_addr = SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num));
- if (base_addr >= CONFIG_MAX_MEM_MAPPED)
- continue;
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- membase = (u32 *)(u32)base_addr;
-
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (l=0; l<NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- return 0;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- }
- }
- } /* if bank enabled */
- } /* for bxcf_num */
-
- return 1;
-}
-
-#ifndef HARD_CODED_DQS
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void DQS_calibration_process(void)
-{
- unsigned long rfdc_reg;
- unsigned long rffd;
- unsigned long val;
- long rffd_average;
- long max_start;
- long min_end;
- unsigned long begin_rqfd[MAXRANKS];
- unsigned long begin_rffd[MAXRANKS];
- unsigned long end_rqfd[MAXRANKS];
- unsigned long end_rffd[MAXRANKS];
- char window_found;
- unsigned long dlycal;
- unsigned long dly_val;
- unsigned long max_pass_length;
- unsigned long current_pass_length;
- unsigned long current_fail_length;
- unsigned long current_start;
- long max_end;
- unsigned char fail_found;
- unsigned char pass_found;
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- u32 rqdc_reg;
- u32 rqfd;
- u32 rqfd_start;
- u32 rqfd_average;
- int loopi = 0;
- char str[] = "Auto calibration -";
- char slash[] = "\\|/-\\|/-";
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
-
- /* first fix RQDC[RQFD] to an average of 80 degre phase shift to find RFDC[RFFD] */
- rqfd_start = 64; /* test-only: don't know if this is the _best_ start value */
-
- puts(str);
-
-calibration_loop:
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_start));
-#else /* CONFIG_DDR_RQDC_FIXED */
- /*
- * On Katmai the complete auto-calibration somehow doesn't seem to
- * produce the best results, meaning optimal values for RQFD/RFFD.
- * This was discovered by GDA using a high bandwidth scope,
- * analyzing the DDR2 signals. GDA provided a fixed value for RQFD,
- * so now on Katmai "only" RFFD is auto-calibrated.
- */
- mtsdram(SDRAM_RQDC, CONFIG_DDR_RQDC_FIXED);
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- max_start = 0;
- min_end = 0;
- begin_rqfd[0] = 0;
- begin_rffd[0] = 0;
- begin_rqfd[1] = 0;
- begin_rffd[1] = 0;
- end_rqfd[0] = 0;
- end_rffd[0] = 0;
- end_rqfd[1] = 0;
- end_rffd[1] = 0;
- window_found = FALSE;
-
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- /*
- * get the delay line calibration register value
- */
- mfsdram(SDRAM_DLCR, dlycal);
- dly_val = SDRAM_DLYCAL_DLCV_DECODE(dlycal) << 2;
-
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rffd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rffd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (current_fail_length >= (dly_val >> 2)) {
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
- } /* for rffd */
-
- /*------------------------------------------------------------------
- * Set the average RFFD value
- *-----------------------------------------------------------------*/
- rffd_average = ((max_start + max_end) >> 1);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
- /* now fix RFDC[RFFD] found and find RQDC[RQFD] */
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
-#if !defined(CONFIG_DDR_RQDC_FIXED)
- max_pass_length = 0;
- max_start = 0;
- max_end = 0;
- current_pass_length = 0;
- current_fail_length = 0;
- current_start = 0;
- window_found = FALSE;
- fail_found = FALSE;
- pass_found = FALSE;
-
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
-
- /*------------------------------------------------------------------
- * Set the timing reg for the test.
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (short_mem_test()) {
- if (fail_found == TRUE) {
- pass_found = TRUE;
- if (current_pass_length == 0)
- current_start = rqfd;
-
- current_fail_length = 0;
- current_pass_length++;
-
- if (current_pass_length > max_pass_length) {
- max_pass_length = current_pass_length;
- max_start = current_start;
- max_end = rqfd;
- }
- }
- } else {
- current_pass_length = 0;
- current_fail_length++;
-
- if (fail_found == FALSE) {
- fail_found = TRUE;
- } else if (pass_found == TRUE) {
- window_found = TRUE;
- break;
- }
- }
- }
-
- rqfd_average = ((max_start + max_end) >> 1);
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- if (rqfd_start < SDRAM_RQDC_RQFD_MAX) {
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- /* try again from with a different RQFD start value */
- rqfd_start++;
- goto calibration_loop;
- }
-
- printf("\nERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang ();
- }
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC,
- (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- blank_string(strlen(str));
-#endif /* CONFIG_DDR_RQDC_FIXED */
-
- /*
- * Now complete RDSS configuration as mentioned on page 7 of the AMCC
- * PowerPC440SP/SPe DDR2 application note:
- * "DDR1/DDR2 Initialization Sequence and Dynamic Tuning"
- */
- mfsdram(SDRAM_RTSR, val);
- if ((val & SDRAM_RTSR_TRK1SM_MASK) == SDRAM_RTSR_TRK1SM_ATPLS1) {
- mfsdram(SDRAM_RDCC, val);
- if ((val & SDRAM_RDCC_RDSS_MASK) != SDRAM_RDCC_RDSS_T4) {
- val += 0x40000000;
- mtsdram(SDRAM_RDCC, val);
- }
- }
-
- mfsdram(SDRAM_DLCR, val);
- debug("%s[%d] DLCR: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RQDC, val);
- debug("%s[%d] RQDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RFDC, val);
- debug("%s[%d] RFDC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
- mfsdram(SDRAM_RDCC, val);
- debug("%s[%d] RDCC: 0x%08lX\n", __FUNCTION__, __LINE__, val);
-}
-#else /* calibration test with hardvalues */
-/*-----------------------------------------------------------------------------+
- * DQS_calibration_process.
- *-----------------------------------------------------------------------------*/
-static void test(void)
-{
- unsigned long dimm_num;
- unsigned long ecc_temp;
- unsigned long i, j;
- unsigned long *membase;
- unsigned long bxcf[MAXRANKS];
- unsigned long val;
- char window_found;
- char begin_found[MAXDIMMS];
- char end_found[MAXDIMMS];
- char search_end[MAXDIMMS];
- unsigned long test[NUMMEMTESTS][NUMMEMWORDS] = {
- {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55} };
-
- /*------------------------------------------------------------------
- * Test to determine the best read clock delay tuning bits.
- *
- * Before the DDR controller can be used, the read clock delay needs to be
- * set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- * This value cannot be hardcoded into the program because it changes
- * depending on the board's setup and environment.
- * To do this, all delay values are tested to see if they
- * work or not. By doing this, you get groups of fails with groups of
- * passing values. The idea is to find the start and end of a passing
- * window and take the center of it to use as the read clock delay.
- *
- * A failure has to be seen first so that when we hit a pass, we know
- * that it is truely the start of the window. If we get passing values
- * to start off with, we don't know if we are at the start of the window.
- *
- * The code assumes that a failure will always be found.
- * If a failure is not found, there is no easy way to get the middle
- * of the passing window. I guess we can pretty much pick any value
- * but some values will be better than others. Since the lowest speed
- * we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- * from experimentation it is safe to say you will always have a failure.
- *-----------------------------------------------------------------*/
- mfsdram(SDRAM_MCOPT1, ecc_temp);
- ecc_temp &= SDRAM_MCOPT1_MCHK_MASK;
- mfsdram(SDRAM_MCOPT1, val);
- mtsdram(SDRAM_MCOPT1, (val & ~SDRAM_MCOPT1_MCHK_MASK) |
- SDRAM_MCOPT1_MCHK_NON);
-
- window_found = FALSE;
- begin_found[0] = FALSE;
- end_found[0] = FALSE;
- search_end[0] = FALSE;
- begin_found[1] = FALSE;
- end_found[1] = FALSE;
- search_end[1] = FALSE;
-
- for (dimm_num = 0; dimm_num < MAXDIMMS; dimm_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num << 2), bxcf[bxcr_num]);
-
- /* Banks enabled */
- if ((bxcf[dimm_num] & SDRAM_BXCF_M_BE_MASK) == SDRAM_BXCF_M_BE_ENABLE) {
-
- /* Bank is enabled */
- membase =
- (unsigned long*)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+dimm_num)));
-
- /*------------------------------------------------------------------
- * Run the short memory test.
- *-----------------------------------------------------------------*/
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- membase[j] = test[i][j];
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (membase[j] != test[i][j]) {
- ppcDcbf((u32)&(membase[j]));
- break;
- }
- ppcDcbf((u32)&(membase[j]));
- }
- sync();
- if (j < NUMMEMWORDS)
- break;
- }
-
- /*------------------------------------------------------------------
- * See if the rffd value passed.
- *-----------------------------------------------------------------*/
- if (i < NUMMEMTESTS) {
- if ((end_found[dimm_num] == FALSE) &&
- (search_end[dimm_num] == TRUE)) {
- end_found[dimm_num] = TRUE;
- }
- if ((end_found[0] == TRUE) &&
- (end_found[1] == TRUE))
- break;
- } else {
- if (begin_found[dimm_num] == FALSE) {
- begin_found[dimm_num] = TRUE;
- search_end[dimm_num] = TRUE;
- }
- }
- } else {
- begin_found[dimm_num] = TRUE;
- end_found[dimm_num] = TRUE;
- }
- }
-
- if ((begin_found[0] == TRUE) && (begin_found[1] == TRUE))
- window_found = TRUE;
-
- /*------------------------------------------------------------------
- * Make sure we found the valid read passing window. Halt if not
- *-----------------------------------------------------------------*/
- if (window_found == FALSE) {
- printf("ERROR: Cannot determine a common read delay for the "
- "DIMM(s) installed.\n");
- spd_ddr_init_hang ();
- }
-
- /*------------------------------------------------------------------
- * Restore the ECC variable to what it originally was
- *-----------------------------------------------------------------*/
- mtsdram(SDRAM_MCOPT1,
- (ppcMfdcr_sdram(SDRAM_MCOPT1) & ~SDRAM_MCOPT1_MCHK_MASK)
- | ecc_temp);
-}
-#endif /* !HARD_CODED_DQS */
-#endif /* !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
-
-#else /* CONFIG_SPD_EEPROM */
-
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures the PPC4xx IBM DDR1/DDR2 SDRAM memory controller.
- * The configuration is performed using static, compile-
- * time parameters.
- * Configures the PPC405EX(r) and PPC460EX/GT
- *---------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- /*
- * Only run this SDRAM init code once. For NAND booting
- * targets like Kilauea, we call initdram() early from the
- * 4k NAND booting image (CONFIG_NAND_SPL) from nand_boot().
- * Later on the NAND U-Boot image runs (CONFIG_NAND_U_BOOT)
- * which calls initdram() again. This time the controller
- * mustn't be reconfigured again since we're already running
- * from SDRAM.
- */
-#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
- unsigned long val;
-
-#if defined(CONFIG_440)
- mtdcr(SDRAM_R0BAS, CONFIG_SYS_SDRAM_R0BAS);
- mtdcr(SDRAM_R1BAS, CONFIG_SYS_SDRAM_R1BAS);
- mtdcr(SDRAM_R2BAS, CONFIG_SYS_SDRAM_R2BAS);
- mtdcr(SDRAM_R3BAS, CONFIG_SYS_SDRAM_R3BAS);
- mtdcr(SDRAM_PLBADDULL, CONFIG_SYS_SDRAM_PLBADDULL); /* MQ0_BAUL */
- mtdcr(SDRAM_PLBADDUHB, CONFIG_SYS_SDRAM_PLBADDUHB); /* MQ0_BAUH */
- mtdcr(SDRAM_CONF1LL, CONFIG_SYS_SDRAM_CONF1LL);
- mtdcr(SDRAM_CONF1HB, CONFIG_SYS_SDRAM_CONF1HB);
- mtdcr(SDRAM_CONFPATHB, CONFIG_SYS_SDRAM_CONFPATHB);
-#endif
-
- /* Set Memory Bank Configuration Registers */
-
- mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
- mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
- mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
- mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
-
- /* Set Memory Clock Timing Register */
-
- mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
-
- /* Set Refresh Time Register */
-
- mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
-
- /* Set SDRAM Timing Registers */
-
- mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
- mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
- mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
-
- /* Set Mode and Extended Mode Registers */
-
- mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
- mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
-
- /* Set Memory Controller Options 1 Register */
-
- mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
-
- /* Set Manual Initialization Control Registers */
-
- mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
- mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
- mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
- mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
- mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
- mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
- mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
- mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
- mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
- mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
- mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
- mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
- mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
- mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
- mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
- mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
-
- /* Set On-Die Termination Registers */
-
- mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
- mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
- mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
-
- /* Set Write Timing Register */
-
- mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
-
- /*
- * Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
- * SDRAM0_MCOPT2[IPTR] = 1
- */
-
- mtsdram(SDRAM_MCOPT2, (SDRAM_MCOPT2_SREN_EXIT |
- SDRAM_MCOPT2_IPTR_EXECUTE));
-
- /*
- * Poll SDRAM0_MCSTAT[MIC] for assertion to indicate the
- * completion of initialization.
- */
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_MIC_MASK) != SDRAM_MCSTAT_MIC_COMP);
-
- /* Set Delay Control Registers */
-
- mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
-
-#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
- mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
- mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
-#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
- /*
- * Enable Controller by SDRAM0_MCOPT2[DCEN] = 1:
- */
-
- mfsdram(SDRAM_MCOPT2, val);
- mtsdram(SDRAM_MCOPT2, val | SDRAM_MCOPT2_DCEN_ENABLE);
-
-#if defined(CONFIG_440)
- /*
- * Program TLB entries with caches enabled, for best performace
- * while auto-calibrating and ECC generation
- */
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), 0);
-#endif
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*------------------------------------------------------------------
- | DQS calibration.
- +-----------------------------------------------------------------*/
- DQS_autocalibration();
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#if defined(CONFIG_DDR_ECC)
- do_program_ecc(0);
-#endif /* defined(CONFIG_DDR_ECC) */
-
-#if defined(CONFIG_440)
- /*
- * Now after initialization (auto-calibration and ECC generation)
- * remove the TLB entries with caches enabled and program again with
- * desired cache functionality
- */
- remove_tlb(0, (CONFIG_SYS_MBYTES_SDRAM << 20));
- program_tlb(0, 0, (CONFIG_SYS_MBYTES_SDRAM << 20), MY_TLB_WORD2_I_ENABLE);
-#endif
-
- ppc4xx_ibm_ddr2_register_dump();
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
-
-#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-
- return (CONFIG_SYS_MBYTES_SDRAM << 20);
-}
-#endif /* CONFIG_SPD_EEPROM */
-
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-#if defined(CONFIG_440)
-u32 mfdcr_any(u32 dcr)
-{
- u32 val;
-
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- val = mfdcr(SDRAM_R0BAS + 0);
- break;
- case SDRAM_R0BAS + 1:
- val = mfdcr(SDRAM_R0BAS + 1);
- break;
- case SDRAM_R0BAS + 2:
- val = mfdcr(SDRAM_R0BAS + 2);
- break;
- case SDRAM_R0BAS + 3:
- val = mfdcr(SDRAM_R0BAS + 3);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- val = 0; /* just to satisfy the compiler */
- }
-
- return val;
-}
-
-void mtdcr_any(u32 dcr, u32 val)
-{
- switch (dcr) {
- case SDRAM_R0BAS + 0:
- mtdcr(SDRAM_R0BAS + 0, val);
- break;
- case SDRAM_R0BAS + 1:
- mtdcr(SDRAM_R0BAS + 1, val);
- break;
- case SDRAM_R0BAS + 2:
- mtdcr(SDRAM_R0BAS + 2, val);
- break;
- case SDRAM_R0BAS + 3:
- mtdcr(SDRAM_R0BAS + 3, val);
- break;
- default:
- printf("DCR %d not defined in case statement!!!\n", dcr);
- }
-}
-#endif /* defined(CONFIG_440) */
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-
-inline void ppc4xx_ibm_ddr2_register_dump(void)
-{
-#if defined(DEBUG)
- printf("\nPPC4xx IBM DDR2 Register Dump:\n");
-
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R0BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R1BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R2BAS);
- PPC4xx_IBM_DDR2_DUMP_MQ_REGISTER(R3BAS);
-#endif /* (defined(CONFIG_440SP) || ... */
-#if defined(CONFIG_405EX)
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BESR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARL);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(BEARH);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WMIRQ);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PLBOPT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(PUABA);
-#endif /* defined(CONFIG_405EX) */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB0CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB1CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB2CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MB3CF);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCSTAT);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MCOPT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MODT3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CODT);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(VVPR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(OPARS);
- /*
- * OPART is only used as a trigger register.
- *
- * No data is contained in this register, and reading or writing
- * to is can cause bad things to happen (hangs). Just skip it and
- * report "N/A".
- */
- printf("%20s = N/A\n", "SDRAM_OPART");
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR0);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR4);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR5);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR6);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR7);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR8);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR9);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR10);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR11);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR12);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR13);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR14);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(INITPLR15);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RQDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RFDC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RDCC);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(DLCR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CLKTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(WRDTR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR1);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR2);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(SDTR3);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(MEMODE);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(ECCES);
-#if (defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT))
- PPC4xx_IBM_DDR2_DUMP_REGISTER(CID);
-#endif /* defined(CONFIG_440SP) || ... */
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RID);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(FCSR);
- PPC4xx_IBM_DDR2_DUMP_REGISTER(RTSR);
-#endif /* defined(DEBUG) */
-}
-
-#endif /* CONFIG_SDRAM_PPC4xx_IBM_DDR2 */
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
deleted file mode 100644
index 0283c91..0000000
--- a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ /dev/null
@@ -1,1251 +0,0 @@
-/*
- * cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
- * This SPD SDRAM detection code supports AMCC PPC44x cpu's with a
- * DDR2 controller (non Denali Core). Those currently are:
- *
- * 405: 405EX
- * 440/460: 440SP/440SPe/460EX/460GT/460SX
- *
- * (C) Copyright 2008 Applied Micro Circuits Corporation
- * Adam Graham <agraham@amcc.com>
- *
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#undef DEBUG
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
-
-/*
- * Only compile the DDR auto-calibration code for NOR boot and
- * not for NAND boot (NAND SPL and NAND U-Boot - NUB)
- */
-#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
-
-#define MAXBXCF 4
-#define SDRAM_RXBAS_SHIFT_1M 20
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
-#define NUMMEMTESTS 24
-#else
-#define NUMMEMTESTS 8
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
-#define NUMLOOPS 1 /* configure as you deem approporiate */
-#define NUMMEMWORDS 16
-
-#define SDRAM_RDCC_RDSS_VAL(n) SDRAM_RDCC_RDSS_DECODE(ddr_rdss_opt(n))
-
-/* Private Structure Definitions */
-
-struct autocal_regs {
- u32 rffd;
- u32 rqfd;
-};
-
-struct ddrautocal {
- u32 rffd;
- u32 rffd_min;
- u32 rffd_max;
- u32 rffd_size;
- u32 rqfd;
- u32 rqfd_size;
- u32 rdcc;
- u32 flags;
-};
-
-struct sdram_timing {
- u32 wrdtr;
- u32 clktr;
-};
-
-struct sdram_timing_clks {
- u32 wrdtr;
- u32 clktr;
- u32 rdcc;
- u32 flags;
-};
-
-struct autocal_clks {
- struct sdram_timing_clks clocks;
- struct ddrautocal autocal;
-};
-
-/*--------------------------------------------------------------------------+
- * Prototypes
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-static u32 DQS_calibration_methodA(struct ddrautocal *);
-static u32 program_DQS_calibration_methodA(struct ddrautocal *);
-#else
-static u32 DQS_calibration_methodB(struct ddrautocal *);
-static u32 program_DQS_calibration_methodB(struct ddrautocal *);
-#endif
-static int short_mem_test(u32 *);
-
-/*
- * To provide an interface for board specific config values in this common
- * DDR setup code, we implement he "weak" default functions here. They return
- * the default value back to the caller.
- *
- * Please see include/configs/yucca.h for an example fora board specific
- * implementation.
- */
-
-#if !defined(CONFIG_SPD_EEPROM)
-u32 __ddr_wrdtr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
-
-u32 __ddr_clktr(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void
-spd_ddr_init_hang(void) __attribute__((weak, alias("__spd_ddr_init_hang")));
-#endif /* defined(CONFIG_SPD_EEPROM) */
-
-ulong __ddr_scan_option(ulong default_val)
-{
- return default_val;
-}
-ulong ddr_scan_option(ulong) __attribute__((weak, alias("__ddr_scan_option")));
-
-u32 __ddr_rdss_opt(u32 default_val)
-{
- return default_val;
-}
-u32 ddr_rdss_opt(ulong) __attribute__((weak, alias("__ddr_rdss_opt")));
-
-
-static u32 *get_membase(int bxcr_num)
-{
- ulong bxcf;
- u32 *membase;
-
-#if defined(SDRAM_R0BAS)
- /* BAS from Memory Queue rank reg. */
- membase =
- (u32 *)(SDRAM_RXBAS_SDBA_DECODE(mfdcr_any(SDRAM_R0BAS+bxcr_num)));
- bxcf = 0; /* just to satisfy the compiler */
-#else
- /* BAS from SDRAM_MBxCF mem rank reg. */
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
- membase = (u32 *)((bxcf & 0xfff80000) << 3);
-#endif
-
- return membase;
-}
-
-static inline void ecc_clear_status_reg(void)
-{
- mtsdram(SDRAM_ECCES, 0xffffffff);
-#if defined(SDRAM_R0BAS)
- mtdcr(SDRAM_ERRSTATLL, 0xffffffff);
-#endif
-}
-
-/*
- * Reset and relock memory DLL after SDRAM_CLKTR change
- */
-static inline void relock_memory_DLL(void)
-{
- u32 reg;
-
- mtsdram(SDRAM_MCOPT2, SDRAM_MCOPT2_IPTR_EXECUTE);
-
- do {
- mfsdram(SDRAM_MCSTAT, reg);
- } while (!(reg & SDRAM_MCSTAT_MIC_COMP));
-
- mfsdram(SDRAM_MCOPT2, reg);
- mtsdram(SDRAM_MCOPT2, reg | SDRAM_MCOPT2_DCEN_ENABLE);
-}
-
-static int ecc_check_status_reg(void)
-{
- u32 ecc_status;
-
- /*
- * Compare suceeded, now check
- * if got ecc error. If got an
- * ecc error, then don't count
- * this as a passing value
- */
- mfsdram(SDRAM_ECCES, ecc_status);
- if (ecc_status != 0x00000000) {
- /* clear on error */
- ecc_clear_status_reg();
- /* ecc check failure */
- return 0;
- }
- ecc_clear_status_reg();
- sync();
-
- return 1;
-}
-
-/* return 1 if passes, 0 if fail */
-static int short_mem_test(u32 *base_address)
-{
- int i, j, l;
- u32 ecc_mode = 0;
-
- ulong test[NUMMEMTESTS][NUMMEMWORDS] = {
- /* 0 */ {0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF},
- /* 1 */ {0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000},
- /* 2 */ {0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555},
- /* 3 */ {0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA},
- /* 4 */ {0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A},
- /* 5 */ {0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5},
- /* 6 */ {0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA},
- /* 7 */ {0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
-
-#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
- /* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
- 0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff},
- /* 9 */ {0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe,
- 0xfffefffe, 0xfffefffe, 0xfffefffe, 0xfffefffe},
- /* 10 */{0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd,
- 0xfffdfffd, 0xfffdfffd, 0xfffdffff, 0xfffdfffd},
- /* 11 */{0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc,
- 0xfffcfffc, 0xfffcfffc, 0xfffcfffc, 0xfffcfffc},
- /* 12 */{0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb,
- 0xfffbfffb, 0xfffffffb, 0xfffffffb, 0xfffffffb},
- /* 13 */{0xfffafffa, 0xfffafffa, 0xfffffffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa,
- 0xfffafffa, 0xfffafffa, 0xfffafffa, 0xfffafffa},
- /* 14 */{0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9,
- 0xfff9fff9, 0xfff9fff9, 0xfff9fff9, 0xfff9fff9},
- /* 15 */{0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8,
- 0xfff8fff8, 0xfff8fff8, 0xfff8fff8, 0xfff8fff8},
- /* 16 */{0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7fff7, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7,
- 0xfff7ffff, 0xfff7ffff, 0xfff7fff7, 0xfff7fff7},
- /* 17 */{0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7,
- 0xfff6fff5, 0xfff6ffff, 0xfff6fff6, 0xfff6fff7},
- /* 18 */{0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5,
- 0xfff5fff4, 0xfff5ffff, 0xfff5fff5, 0xfff5fff5},
- /* 19 */{0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4,
- 0xfff4fff3, 0xfff4ffff, 0xfff4fff4, 0xfff4fff4},
- /* 20 */{0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3,
- 0xfff3fff2, 0xfff3ffff, 0xfff3fff3, 0xfff3fff3},
- /* 21 */{0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2,
- 0xfff2ffff, 0xfff2ffff, 0xfff2fff2, 0xfff2fff2},
- /* 22 */{0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1,
- 0xfff1ffff, 0xfff1ffff, 0xfff1fff1, 0xfff1fff1},
- /* 23 */{0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
- 0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
-#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
- };
-
- mfsdram(SDRAM_MCOPT1, ecc_mode);
- if ((ecc_mode & SDRAM_MCOPT1_MCHK_CHK_REP) ==
- SDRAM_MCOPT1_MCHK_CHK_REP) {
- ecc_clear_status_reg();
- sync();
- ecc_mode = 1;
- } else {
- ecc_mode = 0;
- }
-
- /*
- * Run the short memory test.
- */
- for (i = 0; i < NUMMEMTESTS; i++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- base_address[j] = test[i][j];
- ppcDcbf((ulong)&(base_address[j]));
- }
- sync();
- iobarrier_rw();
- for (l = 0; l < NUMLOOPS; l++) {
- for (j = 0; j < NUMMEMWORDS; j++) {
- if (base_address[j] != test[i][j]) {
- ppcDcbf((u32)&(base_address[j]));
- return 0;
- } else {
- if (ecc_mode) {
- if (!ecc_check_status_reg())
- return 0;
- }
- }
- ppcDcbf((u32)&(base_address[j]));
- } /* for (j = 0; j < NUMMEMWORDS; j++) */
- sync();
- iobarrier_rw();
- } /* for (l=0; l<NUMLOOPS; l++) */
- }
-
- return 1;
-}
-
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodA.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodA(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodA(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodA()
- *
- * Autocalibration Method A
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire FDBK Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * for (i = 0; i < Entire DQS Range; i++) { RQDC.RQFD
- * for (j = 0; j < Entire FDBK Range; j++) { RFDC.RFFD
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1; RQDC.RQFD
- * FDBK_Valid_Window[i][j] = 1; RFDC.RFFD
- * }
- * }
- * }
- */
-static u32 DQS_calibration_methodA(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- u32 passed = 0;
-
- int in_window;
- struct autocal_regs curr_win_min;
- struct autocal_regs curr_win_max;
- struct autocal_regs best_win_min;
- struct autocal_regs best_win_max;
- struct autocal_regs loop_win_min;
- struct autocal_regs loop_win_max;
-
-#ifdef DEBUG
- ulong temp;
-#endif
- ulong rdcc;
-
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
-
- /* start */
- in_window = 0;
-
- memset(&curr_win_min, 0, sizeof(curr_win_min));
- memset(&curr_win_max, 0, sizeof(curr_win_max));
- memset(&best_win_min, 0, sizeof(best_win_min));
- memset(&best_win_max, 0, sizeof(best_win_max));
- memset(&loop_win_min, 0, sizeof(loop_win_min));
- memset(&loop_win_max, 0, sizeof(loop_win_max));
-
- rdcc = 0;
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%x\n", __func__, temp);
- mfsdram(SDRAM_RTSR, temp);
- debug("<%s>SDRAM_RTSR=0x%x\n", __func__, temp);
- mfsdram(SDRAM_FCSR, temp);
- debug("<%s>SDRAM_FCSR=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x00));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) | SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%x\n", __func__, temp);
-#endif
-
- putc(' ');
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
- curr_win_min.rffd = 0;
- curr_win_max.rffd = 0;
- in_window = 0;
-
- for (rffd = 0, pass = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC,
- rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass = short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcr_num */
-
- /* If this value passed update RFFD windows */
- if (pass && !in_window) { /* at the start of window */
- in_window = 1;
- curr_win_min.rffd = curr_win_max.rffd = rffd;
- curr_win_min.rqfd = curr_win_max.rqfd = rqfd;
- mfsdram(SDRAM_RDCC, rdcc); /*record this value*/
- } else if (!pass && in_window) { /* at end of window */
- in_window = 0;
- } else if (pass && in_window) { /* within the window */
- curr_win_max.rffd = rffd;
- curr_win_max.rqfd = rqfd;
- }
- /* else if (!pass && !in_window)
- skip - no pass, not currently in a window */
-
- if (in_window) {
- if ((curr_win_max.rffd - curr_win_min.rffd) >
- (best_win_max.rffd - best_win_min.rffd)) {
- best_win_min.rffd = curr_win_min.rffd;
- best_win_max.rffd = curr_win_max.rffd;
-
- best_win_min.rqfd = curr_win_min.rqfd;
- best_win_max.rqfd = curr_win_max.rqfd;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* RFDC.RFFD */
-
- /*
- * save-off the best window results of the RFDC.RFFD
- * for this RQDC.RQFD setting
- */
- /*
- * if (just ended RFDC.RFDC loop pass window) >
- * (prior RFDC.RFFD loop pass window)
- */
- if ((best_win_max.rffd - best_win_min.rffd) >
- (loop_win_max.rffd - loop_win_min.rffd)) {
- loop_win_min.rffd = best_win_min.rffd;
- loop_win_max.rffd = best_win_max.rffd;
- loop_win_min.rqfd = rqfd;
- loop_win_max.rqfd = rqfd;
- debug("RQFD.min 0x%08x, RQFD.max 0x%08x, "
- "RFFD.min 0x%08x, RFFD.max 0x%08x\n",
- loop_win_min.rqfd, loop_win_max.rqfd,
- loop_win_min.rffd, loop_win_max.rffd);
- }
- } /* RQDC.RQFD */
-
- putc('\b');
-
- debug("\n");
-
- if ((loop_win_min.rffd == 0) && (loop_win_max.rffd == 0) &&
- (best_win_min.rffd == 0) && (best_win_max.rffd == 0) &&
- (best_win_min.rqfd == 0) && (best_win_max.rqfd == 0)) {
- passed = 0;
- }
-
- /*
- * Need to program RQDC before RFDC.
- */
- debug("<%s> RQFD Min: 0x%x\n", __func__, loop_win_min.rqfd);
- debug("<%s> RQFD Max: 0x%x\n", __func__, loop_win_max.rqfd);
- rqfd_average = loop_win_max.rqfd;
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rqfd_average);
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- debug("<%s> RFFD Min: 0x%08x\n", __func__, loop_win_min.rffd);
- debug("<%s> RFFD Max: 0x%08x\n", __func__, loop_win_max.rffd);
- rffd_average = ((loop_win_min.rffd + loop_win_max.rffd) / 2);
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- debug("<%s> RFFD average: 0x%08x\n", __func__, rffd_average);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = loop_win_max.rffd - loop_win_min.rffd;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- cal->rffd_min = loop_win_min.rffd;
- cal->rffd_max = loop_win_max.rffd;
- }
-
- return (u32)passed;
-}
-
-#else /* !defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*-----------------------------------------------------------------------------+
-| program_DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 program_DQS_calibration_methodB(struct ddrautocal *ddrcal)
-{
- u32 pass_result = 0;
-
-#ifdef DEBUG
- ulong temp;
-#endif
-
- /*
- * Program RDCC register
- * Read sample cycle auto-update enable
- */
- mtsdram(SDRAM_RDCC,
- ddr_rdss_opt(SDRAM_RDCC_RDSS_T2) | SDRAM_RDCC_RSAE_ENABLE);
-
-#ifdef DEBUG
- mfsdram(SDRAM_RDCC, temp);
- debug("<%s>SDRAM_RDCC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RQDC register
- * Internal DQS delay mechanism enable
- */
- mtsdram(SDRAM_RQDC,
-#if defined(CONFIG_DDR_RQDC_START_VAL)
- SDRAM_RQDC_RQDE_ENABLE |
- SDRAM_RQDC_RQFD_ENCODE(CONFIG_DDR_RQDC_START_VAL));
-#else
- SDRAM_RQDC_RQDE_ENABLE | SDRAM_RQDC_RQFD_ENCODE(0x38));
-#endif
-
-#ifdef DEBUG
- mfsdram(SDRAM_RQDC, temp);
- debug("<%s>SDRAM_RQDC=0x%08x\n", __func__, temp);
-#endif
-
- /*
- * Program RFDC register
- * Set Feedback Fractional Oversample
- * Auto-detect read sample cycle enable
- */
- mtsdram(SDRAM_RFDC, SDRAM_RFDC_ARSE_ENABLE |
- SDRAM_RFDC_RFOS_ENCODE(0) |
- SDRAM_RFDC_RFFD_ENCODE(0));
-
-#ifdef DEBUG
- mfsdram(SDRAM_RFDC, temp);
- debug("<%s>SDRAM_RFDC=0x%08x\n", __func__, temp);
-#endif
-
- pass_result = DQS_calibration_methodB(ddrcal);
-
- return pass_result;
-}
-
-/*
- * DQS_calibration_methodB()
- *
- * Autocalibration Method B
- *
- * ARRAY [Entire DQS Range] DQS_Valid_Window ; initialized to all zeros
- * ARRAY [Entire Feedback Range] FDBK_Valid_Window; initialized to all zeros
- * MEMWRITE(addr, expected_data);
- * Initialialize the DQS delay to 80 degrees (MCIF0_RRQDC[RQFD]=0x38).
- *
- * for (j = 0; j < Entire Feedback Range; j++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * FDBK_Valid_Window[j] = 1;
- * }
- * }
- *
- * Set MCIF0_RFDC[RFFD] to the middle of the FDBK_Valid_Window.
- *
- * for (i = 0; i < Entire DQS Range; i++) {
- * MEMREAD(addr, actual_data);
- * if (actual_data == expected_data) {
- * DQS_Valid_Window[i] = 1;
- * }
- * }
- *
- * Set MCIF0_RRQDC[RQFD] to the middle of the DQS_Valid_Window.
- */
-/*-----------------------------------------------------------------------------+
-| DQS_calibration_methodB.
-+-----------------------------------------------------------------------------*/
-static u32 DQS_calibration_methodB(struct ddrautocal *cal)
-{
- ulong rfdc_reg;
- ulong rffd;
-
- ulong rqdc_reg;
- ulong rqfd;
-
- ulong rdcc;
-
- u32 *membase;
- ulong bxcf;
- int rqfd_average;
- int bxcr_num;
- int rffd_average;
- int pass;
- uint passed = 0;
-
- int in_window;
- u32 curr_win_min, curr_win_max;
- u32 best_win_min, best_win_max;
- u32 size = 0;
-
- /*------------------------------------------------------------------
- | Test to determine the best read clock delay tuning bits.
- |
- | Before the DDR controller can be used, the read clock delay needs to
- | be set. This is SDRAM_RQDC[RQFD] and SDRAM_RFDC[RFFD].
- | This value cannot be hardcoded into the program because it changes
- | depending on the board's setup and environment.
- | To do this, all delay values are tested to see if they
- | work or not. By doing this, you get groups of fails with groups of
- | passing values. The idea is to find the start and end of a passing
- | window and take the center of it to use as the read clock delay.
- |
- | A failure has to be seen first so that when we hit a pass, we know
- | that it is truely the start of the window. If we get passing values
- | to start off with, we don't know if we are at the start of the window
- |
- | The code assumes that a failure will always be found.
- | If a failure is not found, there is no easy way to get the middle
- | of the passing window. I guess we can pretty much pick any value
- | but some values will be better than others. Since the lowest speed
- | we can clock the DDR interface at is 200 MHz (2x 100 MHz PLB speed),
- | from experimentation it is safe to say you will always have a failure
- +-----------------------------------------------------------------*/
-
- debug("\n\n");
-
- in_window = 0;
- rdcc = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rffd = 0; rffd <= SDRAM_RFDC_RFFD_MAX; rffd++) {
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) { /* start of passing window */
- in_window = 1;
- curr_win_min = curr_win_max = rffd;
- mfsdram(SDRAM_RDCC, rdcc); /* record this value */
- } else if (!pass && in_window) { /* end passing window */
- in_window = 0;
- } else if (pass && in_window) { /* within the passing window */
- curr_win_max = rffd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- cal->rdcc = rdcc;
- }
- passed = 1;
- }
- } /* for rffd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
- else
- size = best_win_max - best_win_min;
-
- debug("RFFD Min: 0x%x\n", best_win_min);
- debug("RFFD Max: 0x%x\n", best_win_max);
- rffd_average = ((best_win_min + best_win_max) / 2);
-
- cal->rffd_min = best_win_min;
- cal->rffd_max = best_win_max;
-
- if (rffd_average < 0)
- rffd_average = 0;
-
- if (rffd_average > SDRAM_RFDC_RFFD_MAX)
- rffd_average = SDRAM_RFDC_RFFD_MAX;
-
- mtsdram(SDRAM_RFDC, rfdc_reg | SDRAM_RFDC_RFFD_ENCODE(rffd_average));
-
- rffd = rffd_average;
- in_window = 0;
-
- curr_win_min = curr_win_max = 0;
- best_win_min = best_win_max = 0;
- for (rqfd = 0; rqfd <= SDRAM_RQDC_RQFD_MAX; rqfd++) {
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg | SDRAM_RQDC_RQFD_ENCODE(rqfd));
-
- pass = 1;
- for (bxcr_num = 0; bxcr_num < MAXBXCF; bxcr_num++) {
-
- mfsdram(SDRAM_MB0CF + (bxcr_num<<2), bxcf);
-
- /* Banks enabled */
- if (bxcf & SDRAM_BXCF_M_BE_MASK) {
- /* Bank is enabled */
- membase = get_membase(bxcr_num);
- pass &= short_mem_test(membase);
- } /* if bank enabled */
- } /* for bxcf_num */
-
- /* If this value passed */
- if (pass && !in_window) {
- in_window = 1;
- curr_win_min = curr_win_max = rqfd;
- } else if (!pass && in_window) {
- in_window = 0;
- } else if (pass && in_window) {
- curr_win_max = rqfd;
- }
-
- if (in_window) {
- if ((curr_win_max - curr_win_min) >
- (best_win_max - best_win_min)) {
- best_win_min = curr_win_min;
- best_win_max = curr_win_max;
- }
- passed = 1;
- }
- } /* for rqfd */
-
- if ((best_win_min == 0) && (best_win_max == 0))
- passed = 0;
-
- debug("RQFD Min: 0x%x\n", best_win_min);
- debug("RQFD Max: 0x%x\n", best_win_max);
- rqfd_average = ((best_win_min + best_win_max) / 2);
-
- if (rqfd_average < 0)
- rqfd_average = 0;
-
- if (rqfd_average > SDRAM_RQDC_RQFD_MAX)
- rqfd_average = SDRAM_RQDC_RQFD_MAX;
-
- mtsdram(SDRAM_RQDC, (rqdc_reg & ~SDRAM_RQDC_RQFD_MASK) |
- SDRAM_RQDC_RQFD_ENCODE(rqfd_average));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- mfsdram(SDRAM_RFDC, rfdc_reg);
-
- /*
- * Need to program RQDC before RFDC. The value is read above.
- * That is the reason why auto cal not work.
- * See, comments below.
- */
- mtsdram(SDRAM_RQDC, rqdc_reg);
- mtsdram(SDRAM_RFDC, rfdc_reg);
-
- debug("RQDC: 0x%08X\n", rqdc_reg);
- debug("RFDC: 0x%08X\n", rfdc_reg);
-
- /* if something passed, then return the size of the largest window */
- if (passed != 0) {
- passed = size;
- cal->rqfd = rqfd_average;
- cal->rffd = rffd_average;
- }
-
- return (uint)passed;
-}
-#endif /* defined(CONFIG_PPC4xx_DDR_METHOD_A) */
-
-/*
- * Default table for DDR auto-calibration of all
- * possible WRDTR and CLKTR values.
- * Table format is:
- * {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]}
- *
- * Table is terminated with {-1, -1} value pair.
- *
- * Board vendors can specify their own board specific subset of
- * known working {SDRAM_WRDTR.[WDTR], SDRAM_CLKTR.[CKTR]} value
- * pairs via a board defined ddr_scan_option() function.
- */
-struct sdram_timing full_scan_options[] = {
- {0, 0}, {0, 1}, {0, 2}, {0, 3},
- {1, 0}, {1, 1}, {1, 2}, {1, 3},
- {2, 0}, {2, 1}, {2, 2}, {2, 3},
- {3, 0}, {3, 1}, {3, 2}, {3, 3},
- {4, 0}, {4, 1}, {4, 2}, {4, 3},
- {5, 0}, {5, 1}, {5, 2}, {5, 3},
- {6, 0}, {6, 1}, {6, 2}, {6, 3},
- {-1, -1}
-};
-
-/*---------------------------------------------------------------------------+
-| DQS_calibration.
-+----------------------------------------------------------------------------*/
-u32 DQS_autocalibration(void)
-{
- u32 wdtr;
- u32 clkp;
- u32 result = 0;
- u32 best_result = 0;
- u32 best_rdcc;
- struct ddrautocal ddrcal;
- struct autocal_clks tcal;
- ulong rfdc_reg;
- ulong rqdc_reg;
- u32 val;
- int verbose_lvl = 0;
- char *str;
- char slash[] = "\\|/-\\|/-";
- int loopi = 0;
- struct sdram_timing *scan_list;
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- int i;
- char tmp[64]; /* long enough for environment variables */
-#endif
-
- memset(&tcal, 0, sizeof(tcal));
-
- ddr_scan_option((ulong)full_scan_options);
-
- scan_list =
- (struct sdram_timing *)ddr_scan_option((ulong)full_scan_options);
-
- mfsdram(SDRAM_MCOPT1, val);
- if ((val & SDRAM_MCOPT1_MCHK_CHK_REP) == SDRAM_MCOPT1_MCHK_CHK_REP)
- str = "ECC Auto calibration -";
- else
- str = "Auto calibration -";
-
- puts(str);
-
-#if defined(DEBUG_PPC4xx_DDR_AUTOCALIBRATION)
- i = getenv_r("autocalib", tmp, sizeof(tmp));
- if (i < 0)
- strcpy(tmp, CONFIG_AUTOCALIB);
-
- if (strcmp(tmp, "final") == 0) {
- /* display the final autocalibration results only */
- verbose_lvl = 1;
- } else if (strcmp(tmp, "loop") == 0) {
- /* display summary autocalibration info per iteration */
- verbose_lvl = 2;
- } else if (strcmp(tmp, "display") == 0) {
- /* display full debug autocalibration window info. */
- verbose_lvl = 3;
- }
-#endif /* (DEBUG_PPC4xx_DDR_AUTOCALIBRATION) */
-
- best_rdcc = (SDRAM_RDCC_RDSS_T4 >> 30);
-
- while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) {
- wdtr = scan_list->wrdtr;
- clkp = scan_list->clktr;
-
- mfsdram(SDRAM_WRDTR, val);
- val &= ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK);
- mtsdram(SDRAM_WRDTR, (val |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | (wdtr << 25))));
-
- mtsdram(SDRAM_CLKTR, clkp << 30);
-
- relock_memory_DLL();
-
- putc('\b');
- putc(slash[loopi++ % 8]);
-
-#ifdef DEBUG
- debug("\n");
- debug("*** --------------\n");
- mfsdram(SDRAM_WRDTR, val);
- debug("*** SDRAM_WRDTR set to 0x%08x\n", val);
- mfsdram(SDRAM_CLKTR, val);
- debug("*** SDRAM_CLKTR set to 0x%08x\n", val);
-#endif
-
- debug("\n");
- if (verbose_lvl > 2) {
- printf("*** SDRAM_WRDTR (wdtr) set to %d\n", wdtr);
- printf("*** SDRAM_CLKTR (clkp) set to %d\n", clkp);
- }
-
- memset(&ddrcal, 0, sizeof(ddrcal));
-
- /*
- * DQS calibration.
- */
- /*
- * program_DQS_calibration_method[A|B]() returns 0 if no
- * passing RFDC.[RFFD] window is found or returns the size
- * of the best passing window; in the case of a found passing
- * window, the ddrcal will contain the values of the best
- * window RQDC.[RQFD] and RFDC.[RFFD].
- */
-
- /*
- * Call PPC4xx SDRAM DDR autocalibration methodA or methodB.
- * Default is methodB.
- * Defined the autocalibration method in the board specific
- * header file.
- * Please see include/configs/kilauea.h for an example for
- * a board specific implementation.
- */
-#if defined(CONFIG_PPC4xx_DDR_METHOD_A)
- result = program_DQS_calibration_methodA(&ddrcal);
-#else
- result = program_DQS_calibration_methodB(&ddrcal);
-#endif
-
- sync();
-
- /*
- * Clear potential errors resulting from auto-calibration.
- * If not done, then we could get an interrupt later on when
- * exceptions are enabled.
- */
- set_mcsr(get_mcsr());
-
- val = ddrcal.rdcc; /* RDCC from the best passing window */
-
- udelay(100);
-
- if (verbose_lvl > 1) {
- char *tstr;
- switch ((val >> 30)) {
- case 0:
- if (result != 0)
- tstr = "T1";
- else
- tstr = "N/A";
- break;
- case 1:
- tstr = "T2";
- break;
- case 2:
- tstr = "T3";
- break;
- case 3:
- tstr = "T4";
- break;
- default:
- tstr = "unknown";
- break;
- }
- printf("** WRDTR(%d) CLKTR(%d), Wind (%d), best (%d), "
- "max-min(0x%04x)(0x%04x), RDCC: %s\n",
- wdtr, clkp, result, best_result,
- ddrcal.rffd_min, ddrcal.rffd_max, tstr);
- }
-
- /*
- * The DQS calibration "result" is either "0"
- * if no passing window was found, or is the
- * size of the RFFD passing window.
- */
- /*
- * want the lowest Read Sample Cycle Select
- */
- val = SDRAM_RDCC_RDSS_DECODE(val);
- debug("*** (%d) (%d) current_rdcc, best_rdcc\n",
- val, best_rdcc);
-
- if ((result != 0) &&
- (val >= SDRAM_RDCC_RDSS_VAL(SDRAM_RDCC_RDSS_T2))) {
- if (((result == best_result) && (val < best_rdcc)) ||
- ((result > best_result) && (val <= best_rdcc))) {
- tcal.autocal.flags = 1;
- debug("*** (%d)(%d) result passed window "
- "size: 0x%08x, rqfd = 0x%08x, "
- "rffd = 0x%08x, rdcc = 0x%08x\n",
- wdtr, clkp, result, ddrcal.rqfd,
- ddrcal.rffd, ddrcal.rdcc);
-
- /*
- * Save the SDRAM_WRDTR and SDRAM_CLKTR
- * settings for the largest returned
- * RFFD passing window size.
- */
- best_rdcc = val;
- tcal.clocks.wrdtr = wdtr;
- tcal.clocks.clktr = clkp;
- tcal.clocks.rdcc = SDRAM_RDCC_RDSS_ENCODE(val);
- tcal.autocal.rqfd = ddrcal.rqfd;
- tcal.autocal.rffd = ddrcal.rffd;
- best_result = result;
-
- if (verbose_lvl > 2) {
- printf("** (%d)(%d) "
- "best result: 0x%04x\n",
- wdtr, clkp,
- best_result);
- printf("** (%d)(%d) "
- "best WRDTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.wrdtr);
- printf("** (%d)(%d) "
- "best CLKTR: 0x%04x\n",
- wdtr, clkp,
- tcal.clocks.clktr);
- printf("** (%d)(%d) "
- "best RQDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rqfd);
- printf("** (%d)(%d) "
- "best RFDC: 0x%04x\n",
- wdtr, clkp,
- tcal.autocal.rffd);
- printf("** (%d)(%d) "
- "best RDCC: 0x%08x\n",
- wdtr, clkp,
- (u32)tcal.clocks.rdcc);
- mfsdram(SDRAM_RTSR, val);
- printf("** (%d)(%d) best "
- "loop RTSR: 0x%08x\n",
- wdtr, clkp, val);
- mfsdram(SDRAM_FCSR, val);
- printf("** (%d)(%d) best "
- "loop FCSR: 0x%08x\n",
- wdtr, clkp, val);
- }
- }
- } /* if ((result != 0) && (val >= (ddr_rdss_opt()))) */
- scan_list++;
- } /* while ((scan_list->wrdtr != -1) && (scan_list->clktr != -1)) */
-
- if (tcal.autocal.flags == 1) {
- if (verbose_lvl > 0) {
- printf("*** --------------\n");
- printf("*** best_result window size: %d\n",
- best_result);
- printf("*** best_result WRDTR: 0x%04x\n",
- tcal.clocks.wrdtr);
- printf("*** best_result CLKTR: 0x%04x\n",
- tcal.clocks.clktr);
- printf("*** best_result RQFD: 0x%04x\n",
- tcal.autocal.rqfd);
- printf("*** best_result RFFD: 0x%04x\n",
- tcal.autocal.rffd);
- printf("*** best_result RDCC: 0x%04x\n",
- tcal.clocks.rdcc);
- printf("*** --------------\n");
- printf("\n");
- }
-
- /*
- * if got best passing result window, then lock in the
- * best CLKTR, WRDTR, RQFD, and RFFD values
- */
- mfsdram(SDRAM_WRDTR, val);
- mtsdram(SDRAM_WRDTR, (val &
- ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
- ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC |
- (tcal.clocks.wrdtr << 25)));
-
- mtsdram(SDRAM_CLKTR, tcal.clocks.clktr << 30);
-
- relock_memory_DLL();
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- rqdc_reg &= ~(SDRAM_RQDC_RQFD_MASK);
- mtsdram(SDRAM_RQDC, rqdc_reg |
- SDRAM_RQDC_RQFD_ENCODE(tcal.autocal.rqfd));
-
- mfsdram(SDRAM_RQDC, rqdc_reg);
- debug("*** best_result: read value SDRAM_RQDC 0x%08x\n",
- rqdc_reg);
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- rfdc_reg &= ~(SDRAM_RFDC_RFFD_MASK);
- mtsdram(SDRAM_RFDC, rfdc_reg |
- SDRAM_RFDC_RFFD_ENCODE(tcal.autocal.rffd));
-
- mfsdram(SDRAM_RFDC, rfdc_reg);
- debug("*** best_result: read value SDRAM_RFDC 0x%08x\n",
- rfdc_reg);
- mfsdram(SDRAM_RDCC, val);
- debug("*** SDRAM_RDCC 0x%08x\n", val);
- } else {
- /*
- * no valid windows were found
- */
- printf("DQS memory calibration window can not be determined, "
- "terminating u-boot.\n");
- ppc4xx_ibm_ddr2_register_dump();
- spd_ddr_init_hang();
- }
-
- blank_string(strlen(str));
-
- return 0;
-}
-#else /* defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
-u32 DQS_autocalibration(void)
-{
- return 0;
-}
-#endif /* !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL) */
-#endif /* defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION) */
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
deleted file mode 100644
index eed4534..0000000
--- a/cpu/ppc4xx/4xx_pci.c
+++ /dev/null
@@ -1,873 +0,0 @@
-/*-----------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of
- * the GNU General Public license version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------+
- *
- * File Name: 405gp_pci.c
- *
- * Function: Initialization code for the 405GP PCI Configuration regs.
- *
- * Author: Mark Game
- *
- * Change Activity-
- *
- * Date Description of Change BY
- * --------- --------------------- ---
- * 09-Sep-98 Created MCG
- * 02-Nov-98 Removed External arbiter selected message JWB
- * 27-Nov-98 Zero out PTMBAR2 and disable in PTM2MS JWB
- * 04-Jan-99 Zero out other unused PMM and PTM regs. Change bus scan MCG
- * from (0 to n) to (1 to n).
- * 17-May-99 Port to Walnut JWB
- * 17-Jun-99 Updated for VGA support JWB
- * 21-Jun-99 Updated to allow SRAM region to be a target from PCI bus JWB
- * 19-Jul-99 Updated for 405GP pass 1 errata #26 (Low PCI subsequent MCG
- * target latency timer values are not supported).
- * Should be fixed in pass 2.
- * 09-Sep-99 Removed use of PTM2 since the SRAM region no longer needs JWB
- * to be a PCI target. Zero out PTMBAR2 and disable in PTM2MS.
- * 10-Dec-99 Updated PCI_Write_CFG_Reg for pass2 errata #6 JWB
- * 11-Jan-00 Ensure PMMxMAs disabled before setting PMMxLAs. This is not
- * really required after a reset since PMMxMAs are already
- * disabled but is a good practice nonetheless. JWB
- * 12-Jun-01 stefan.roese@esd-electronics.com
- * - PCI host/adapter handling reworked
- * 09-Jul-01 stefan.roese@esd-electronics.com
- * - PCI host now configures from device 0 (not 1) to max_dev,
- * (host configures itself)
- * - On CPCI-405 pci base address and size is generated from
- * SDRAM and FLASH size (CFG regs not used anymore)
- * - Some minor changes for CPCI-405-A (adapter version)
- * 14-Sep-01 stefan.roese@esd-electronics.com
- * - CONFIG_PCI_SCAN_SHOW added to print pci devices upon startup
- * 28-Sep-01 stefan.roese@esd-electronics.com
- * - Changed pci master configuration for linux compatibility
- * (no need for bios_fixup() anymore)
- * 26-Feb-02 stefan.roese@esd-electronics.com
- * - Bug fixed in pci configuration (Andrew May)
- * - Removed pci class code init for CPCI405 board
- * 15-May-02 stefan.roese@esd-electronics.com
- * - New vga device handling
- * 29-May-02 stefan.roese@esd-electronics.com
- * - PCI class code init added (if defined)
- *----------------------------------------------------------------------------*/
-
-#include <common.h>
-#include <command.h>
-#include <asm/4xx_pci.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#ifdef CONFIG_PCI
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-
-#if defined(CONFIG_PMC405)
-ushort pmc405_pci_subsys_deviceid(void);
-#endif
-
-/*#define DEBUG*/
-
-/*
- * Board-specific pci initialization
- * Platform code can reimplement pci_pre_init() if needed
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
-#if defined(CONFIG_405EP)
- /*
- * Enable the internal PCI arbiter by default.
- *
- * On 405EP CPUs the internal arbiter can be controlled
- * by the I2C strapping EEPROM. If you want to do so
- * or if you want to disable the arbiter pci_pre_init()
- * must be reimplemented without enabling the arbiter.
- * The arbiter is enabled in this place because of
- * compatibility reasons.
- */
- mtdcr(CPC0_PCI, mfdcr(CPC0_PCI) | CPC0_PCI_ARBIT_EN);
-#endif /* CONFIG_405EP */
-
- return 1;
-}
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-int __is_pci_host(struct pci_controller *hose)
-{
-#if defined(CONFIG_405GP)
- if (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN)
- return 1;
-#elif defined (CONFIG_405EP)
- if (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN)
- return 1;
-#endif
- return 0;
-}
-int is_pci_host(struct pci_controller *hose) __attribute__((weak, alias("__is_pci_host")));
-
-/*-----------------------------------------------------------------------------+
- * pci_init. Initializes the 405GP PCI Configuration regs.
- *-----------------------------------------------------------------------------*/
-void pci_405gp_init(struct pci_controller *hose)
-{
- int i, reg_num = 0;
- bd_t *bd = gd->bd;
-
- unsigned short temp_short;
- unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- char *ptmla_str, *ptmms_str;
-#endif
- unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
- unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
-#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
- unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
- unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
- unsigned long pmmpcila[3] = {0x80000000, 0x00000000, 0};
- unsigned long pmmpciha[3] = {0x00000000, 0x00000000, 0};
-#else
- unsigned long pmmla[3] = {0x80000000, 0,0};
- unsigned long pmmma[3] = {0xC0000001, 0,0};
- unsigned long pmmpcila[3] = {0x80000000, 0,0};
- unsigned long pmmpciha[3] = {0x00000000, 0,0};
-#endif
-#ifdef CONFIG_PCI_PNP
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- char *s;
-#endif
-#endif
-
-#if defined(CONFIG_PCI_4xx_PTM_OVERWRITE)
- ptmla_str = getenv("ptm1la");
- ptmms_str = getenv("ptm1ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[0] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[0] = simple_strtoul (ptmms_str, NULL, 16);
- }
-
- ptmla_str = getenv("ptm2la");
- ptmms_str = getenv("ptm2ms");
- if(NULL != ptmla_str && NULL != ptmms_str ) {
- ptmla[1] = simple_strtoul (ptmla_str, NULL, 16);
- ptmms[1] = simple_strtoul (ptmms_str, NULL, 16);
- }
-#endif
-
- /*
- * Register the hose
- */
- hose->first_busno = 0;
- hose->last_busno = 0xff;
-
- /* ISA/PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- MIN_PCI_PCI_IOADDR,
- MIN_PLB_PCI_IOADDR,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00800000,
- 0xe8800000,
- 0x03800000,
- PCI_REGION_IO);
-
- reg_num = 2;
-
- /* Memory spaces */
- for (i=0; i<2; i++)
- if (ptmms[i] & 1)
- {
- if (!i) hose->pci_fb = hose->regions + reg_num;
-
- pci_set_region(hose->regions + reg_num++,
- ptmpcila[i], ptmla[i],
- ~(ptmms[i] & 0xfffff000) + 1,
- PCI_REGION_MEM |
- PCI_REGION_SYS_MEMORY);
- }
-
- /* PCI memory spaces */
- for (i=0; i<3; i++)
- if (pmmma[i] & 1)
- {
- pci_set_region(hose->regions + reg_num++,
- pmmpcila[i], pmmla[i],
- ~(pmmma[i] & 0xfffff000) + 1,
- PCI_REGION_MEM);
- }
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose,
- PCICFGADR,
- PCICFGDATA);
-
- if (hose->pci_fb)
- pciauto_region_init(hose->pci_fb);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return;
- }
-
- pci_register_hose(hose);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Master configuration.
- * Map one 512 MB range of PLB/processor addresses to PCI memory space.
- * PLB address 0x80000000-0xBFFFFFFF ==> PCI address 0x80000000-0xBFFFFFFF
- * Use byte reversed out routines to handle endianess.
- *--------------------------------------------------------------------------*/
- out32r(PMM0MA, (pmmma[0]&~0x1)); /* disable, configure PMMxLA, PMMxPCILA first */
- out32r(PMM0LA, pmmla[0]);
- out32r(PMM0PCILA, pmmpcila[0]);
- out32r(PMM0PCIHA, pmmpciha[0]);
- out32r(PMM0MA, pmmma[0]);
-
- /*--------------------------------------------------------------------------+
- * PMM1 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM1MA, (pmmma[1]&~0x1));
- out32r(PMM1LA, pmmla[1]);
- out32r(PMM1PCILA, pmmpcila[1]);
- out32r(PMM1PCIHA, pmmpciha[1]);
- out32r(PMM1MA, pmmma[1]);
-
- /*--------------------------------------------------------------------------+
- * PMM2 is not used. Initialize them to zero.
- *--------------------------------------------------------------------------*/
- out32r(PMM2MA, (pmmma[2]&~0x1));
- out32r(PMM2LA, pmmla[2]);
- out32r(PMM2PCILA, pmmpcila[2]);
- out32r(PMM2PCIHA, pmmpciha[2]);
- out32r(PMM2MA, pmmma[2]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM1)
- * Note: PTM1MS is hardwire enabled but we set the enable bit anyway.
- *--------------------------------------------------------------------------*/
- out32r(PTM1LA, ptmla[0]); /* insert address */
- out32r(PTM1MS, ptmms[0]); /* insert size, enable bit is 1 */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_1, ptmpcila[0]);
-
- /*--------------------------------------------------------------------------+
- * 405GP PCI Target configuration. (PTM2)
- *--------------------------------------------------------------------------*/
- out32r(PTM2LA, ptmla[1]); /* insert address */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, ptmpcila[1]);
-
- if (ptmms[1] == 0)
- {
- out32r(PTM2MS, 0x00000001); /* set enable bit */
- pci_write_config_dword(PCIDEVID_405GP, PCI_BASE_ADDRESS_2, 0x00000000);
- out32r(PTM2MS, 0x00000000); /* disable */
- }
- else
- {
- out32r(PTM2MS, ptmms[1]); /* insert size, enable bit is 1 */
- }
-
- /*
- * Insert Subsystem Vendor and Device ID
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
-#ifdef CONFIG_CPCI405
- if (is_pci_host(hose))
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
- else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
-#else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-#endif
-
- /*
- * Insert Class-code
- */
-#ifdef CONFIG_SYS_PCI_CLASSCODE
- pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
-#endif /* CONFIG_SYS_PCI_CLASSCODE */
-
- /*--------------------------------------------------------------------------+
- * If PCI speed = 66MHz, set 66MHz capable bit.
- *--------------------------------------------------------------------------*/
- if (bd->bi_pci_busfreq >= 66000000) {
- pci_read_config_word(PCIDEVID_405GP, PCI_STATUS, &temp_short);
- pci_write_config_word(PCIDEVID_405GP,PCI_STATUS,(temp_short|PCI_STATUS_66MHZ));
- }
-
-#if (CONFIG_PCI_HOST != PCI_HOST_ADAPTER)
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
- /*--------------------------------------------------------------------------+
- * Write the 405GP PCI Configuration regs.
- * Enable 405GP to be a master on the PCI bus (PMM).
- * Enable 405GP to act as a PCI memory target (PTM).
- *--------------------------------------------------------------------------*/
- pci_read_config_word(PCIDEVID_405GP, PCI_COMMAND, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCI_COMMAND, temp_short |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
- }
-#endif
-
-#if defined(CONFIG_405EP)
- /*
- * on ppc405ep vendor/device id is not set
- * The user manual says 0x1014 (IBM) / 0x0156 (405GP!)
- * are the correct values.
- */
- pci_write_config_word(PCIDEVID_405GP, PCI_VENDOR_ID, PCI_VENDOR_ID_IBM);
- pci_write_config_word(PCIDEVID_405GP,
- PCI_DEVICE_ID, PCI_DEVICE_ID_IBM_405GP);
-#endif
-
- /*
- * Set HCE bit (Host Configuration Enabled)
- */
- pci_read_config_word(PCIDEVID_405GP, PCIBRDGOPT2, &temp_short);
- pci_write_config_word(PCIDEVID_405GP, PCIBRDGOPT2, (temp_short | 0x0001));
-
-#ifdef CONFIG_PCI_PNP
- /*--------------------------------------------------------------------------+
- * Scan the PCI bus and configure devices found.
- *--------------------------------------------------------------------------*/
-#if (CONFIG_PCI_HOST == PCI_HOST_AUTO)
- if (is_pci_host(hose) ||
- (((s = getenv("pciscan")) != NULL) && (strcmp(s, "yes") == 0)))
-#endif
- {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
-#endif /* CONFIG_PCI_PNP */
-
-}
-
-/*
- * drivers/pci/pci.c skips every host bridge but the 405GP since it could
- * be set as an Adapter.
- *
- * I (Andrew May) don't know what we should do here, but I don't want
- * the auto setup of a PCI device disabling what is done pci_405gp_init
- * as has happened before.
- */
-void pci_405gp_setup_bridge(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
-#ifdef DEBUG
- printf("405gp_setup_bridge\n");
-#endif
-}
-
-/*
- *
- */
-
-void pci_405gp_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
-{
- unsigned char int_line = 0xff;
-
- /*
- * Write pci interrupt line register (cpci405 specific)
- */
- switch (PCI_DEV(dev) & 0x03)
- {
- case 0:
- int_line = 27 + 2;
- break;
- case 1:
- int_line = 27 + 3;
- break;
- case 2:
- int_line = 27 + 0;
- break;
- case 3:
- int_line = 27 + 1;
- break;
- }
-
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, int_line);
-}
-
-void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
- struct pci_config_table *entry)
-{
- unsigned int cmdstat = 0;
-
- pciauto_setup_device(hose, dev, 6, hose->pci_mem, hose->pci_prefetch, hose->pci_io);
-
- /* always enable io space on vga boards */
- pci_hose_read_config_dword(hose, dev, PCI_COMMAND, &cmdstat);
- cmdstat |= PCI_COMMAND_IO;
- pci_hose_write_config_dword(hose, dev, PCI_COMMAND, cmdstat);
-}
-
-#if !(defined(CONFIG_PIP405) || defined (CONFIG_MIP405)) && !(defined (CONFIG_SC3))
-
-/*
- *As is these functs get called out of flash Not a horrible
- *thing, but something to keep in mind. (no statics?)
- */
-static struct pci_config_table pci_405gp_config_table[] = {
-/*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
- {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
-#endif
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_NOT_DEFINED_VGA,
- PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_vga},
-
- { }
-};
-
-static struct pci_controller hose = {
- fixup_irq: pci_405gp_fixup_irq,
- config_table: pci_405gp_config_table,
-};
-
-void pci_init_board(void)
-{
- /*we want the ptrs to RAM not flash (ie don't use init list)*/
- hose.fixup_irq = pci_405gp_fixup_irq;
- hose.config_table = pci_405gp_config_table;
- pci_405gp_init(&hose);
-}
-
-#endif
-
-#endif /* CONFIG_405GP */
-
-/*-----------------------------------------------------------------------------+
- * CONFIG_440
- *-----------------------------------------------------------------------------*/
-#if defined(CONFIG_440)
-
-static struct pci_controller ppc440_hose = {0};
-
-/*
- * This routine is called to determine if a pci scan should be
- * performed. With various hardware environments (especially cPCI and
- * PPMC) it's insufficient to depend on the state of the arbiter enable
- * bit in the strap register, or generic host/adapter assumptions.
- *
- * Rather than hard-code a bad assumption in the general 440 code, the
- * 440 pci code requires the board to decide at runtime.
- *
- * Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- * Weak default implementation: "Normal" boards implement the PCI
- * host functionality. This can be overridden for PCI adapter boards.
- */
-int __is_pci_host(struct pci_controller *hose)
-{
- return 1;
-}
-int is_pci_host(struct pci_controller *hose)
- __attribute__((weak, alias("__is_pci_host")));
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX)
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-/*
- * pci_target_init
- *
- * The bootstrap configuration provides default settings for the pci
- * inbound map (PIM). But the bootstrap config choices are limited and
- * may not be sufficient for a given board.
- */
-void __pci_target_init(struct pci_controller *hose)
-{
- /*
- * Set up Direct MMIO registers
- */
-
- /*
- * PowerPC440 EP PCI Master configuration.
- * Map one 1Gig range of PLB/processor addresses to PCI memory space.
- * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
- * Use byte reversed out routines to handle endianess.
- * Make this region non-prefetchable.
- */
- /* PMM0 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM0MA, 0x00000000);
- /* PMM0 Local Address */
- out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI Low Address */
- out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE);
- /* PMM0 PCI High Address */
- out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM0MA, 0xE0000001);
-
- /* PMM1 Mask/Attribute - disabled b4 setting */
- out_le32((void *)PCIL0_PMM1MA, 0x00000000);
- /* PMM1 Local Address */
- out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI Low Address */
- out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2);
- /* PMM1 PCI High Address */
- out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000);
- /* 512M + No prefetching, and enable region */
- out_le32((void *)PCIL0_PMM1MA, 0xE0000001);
-
- out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */
- out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */
- out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */
-
- /*
- * Set up Configuration registers
- */
-
- /* Program the board's subsystem id/vendor id */
- pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
- CONFIG_SYS_PCI_SUBSYS_VENDORID);
- pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID);
-
- /* Configure command register as bus master */
- pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
-
- /* 240nS PCI clock */
- pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
-
- /* No error reporting */
- pci_write_config_word(0, PCI_ERREN, 0);
-
- pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-/*
- * pci_pre_init
- *
- * This routine is called just prior to registering the hose and gives
- * the board the opportunity to check things. Returning a value of zero
- * indicates that things are bad & PCI initialization should be aborted.
- *
- * Different boards may wish to customize the pci controller structure
- * (add regions, override default access routines, etc) or perform
- * certain pre-initialization actions.
- *
- */
-int __pci_pre_init(struct pci_controller *hose)
-{
- u32 reg;
-
- /*
- * Set priority for all PLB3 devices to 0.
- * Set PLB3 arbiter to fair mode.
- */
- mfsdr(SD0_AMP1, reg);
- mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB3_ACR);
- mtdcr(PLB3_ACR, reg | 0x80000000);
-
- /*
- * Set priority for all PLB4 devices to 0.
- */
- mfsdr(SD0_AMP0, reg);
- mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00);
- reg = mfdcr(PLB4_ACR) | 0xa0000000;
- mtdcr(PLB4_ACR, reg);
-
- /*
- * Set Nebula PLB4 arbiter to fair mode.
- */
- /* Segment0 */
- reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR;
- reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED;
- reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP;
- reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP;
- mtdcr(PLB0_ACR, reg);
-
- /* Segment1 */
- reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR;
- reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED;
- reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP;
- reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP;
- mtdcr(PLB1_ACR, reg);
-
-#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ)
- hose->fixup_irq = board_pci_fixup_irq;
-#endif
-
- return 1;
-}
-
-#else /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void __pci_target_init(struct pci_controller * hose)
-{
- /*
- * Disable everything
- */
- out_le32((void *)PCIL0_PIM0SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM1SA, 0); /* disable */
- out_le32((void *)PCIL0_PIM2SA, 0); /* disable */
- out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */
-
- /*
- * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440
- * strapping options do not support sizes such as 128/256 MB.
- */
- out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE);
- out_le32((void *)PCIL0_PIM0LAH, 0);
- out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out_le32((void *)PCIL0_BAR0, 0);
-
- /*
- * Program the board's subsystem id/vendor id
- */
- out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
- out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
-
- out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) |
- PCI_COMMAND_MEMORY);
-}
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int __pci_pre_init(struct pci_controller *hose)
-{
- /*
- * This board is always configured as the host & requires the
- * PCI arbiter to be enabled.
- */
- if (!pci_arbiter_enabled()) {
- printf("PCI: PCI Arbiter disabled!\n");
- return 0;
- }
-
- return 1;
-}
-
-#endif /* defined(CONFIG_440EP) ... */
-
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose)
- __attribute__((weak, alias("__pci_target_init")));
-#endif /* CONFIG_SYS_PCI_TARGET_INIT */
-
-int pci_pre_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_pre_init")));
-
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
-void __pci_master_init(struct pci_controller *hose)
-{
- u16 reg;
-
- /*
- * Write the PowerPC440 EP PCI Configuration regs.
- * Enable PowerPC440 EP to be a master on the PCI bus (PMM).
- * Enable PowerPC440 EP to act as a PCI memory target (PTM).
- */
- pci_read_config_word(0, PCI_COMMAND, &reg);
- pci_write_config_word(0, PCI_COMMAND, reg |
- PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-}
-void pci_master_init(struct pci_controller *hose)
- __attribute__((weak, alias("__pci_master_init")));
-#endif /* CONFIG_SYS_PCI_MASTER_INIT */
-
-int pci_440_init (struct pci_controller *hose)
-{
- int reg_num = 0;
-
-#ifndef CONFIG_DISABLE_PISE_TEST
- /*--------------------------------------------------------------------------+
- * The PCI initialization sequence enable bit must be set ... if not abort
- * pci setup since updating the bit requires chip reset.
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long strap;
-
- mfsdr(SDR0_SDSTP1,strap);
- if ((strap & SDR0_SDSTP1_PISE_MASK) == 0) {
- printf("PCI: SDR0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#elif defined(CONFIG_440GP)
- unsigned long strap;
-
- strap = mfdcr(CPC0_STRP1);
- if ((strap & CPC0_STRP1_PISE_MASK) == 0) {
- printf("PCI: CPC0_STRP1[PISE] not set.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-#endif
-#endif /* CONFIG_DISABLE_PISE_TEST */
-
- /*--------------------------------------------------------------------------+
- * PCI controller init
- *--------------------------------------------------------------------------*/
- hose->first_busno = 0;
- hose->last_busno = 0;
-
- /* PCI I/O space */
- pci_set_region(hose->regions + reg_num++,
- 0x00000000,
- PCIL0_IOBASE,
- 0x10000,
- PCI_REGION_IO);
-
- /* PCI memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_SYS_PCI_TARGBASE,
- CONFIG_SYS_PCI_MEMBASE,
-#ifdef CONFIG_SYS_PCI_MEMSIZE
- CONFIG_SYS_PCI_MEMSIZE,
-#else
- 0x10000000,
-#endif
- PCI_REGION_MEM );
-
-#if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \
- defined(CONFIG_PCI_SYS_MEM_SIZE)
- /* System memory space */
- pci_set_region(hose->regions + reg_num++,
- CONFIG_PCI_SYS_MEM_BUS,
- CONFIG_PCI_SYS_MEM_PHYS,
- CONFIG_PCI_SYS_MEM_SIZE,
- PCI_REGION_MEM | PCI_REGION_SYS_MEMORY );
-#endif
-
- hose->region_count = reg_num;
-
- pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA);
-
- /* Let board change/modify hose & do initial checks */
- if (pci_pre_init(hose) == 0) {
- printf("PCI: Board-specific initialization failed.\n");
- printf("PCI: Configuration aborted.\n");
- return -1;
- }
-
- pci_register_hose( hose );
-
- /*--------------------------------------------------------------------------+
- * PCI target init
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_TARGET_INIT)
- pci_target_init(hose); /* Let board setup pci target */
-#else
- out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
- out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
- out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */
-#elif defined(PCIL0_BRDGOPT1)
- out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */
- out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI master init: default is one 256MB region for PCI memory:
- * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
- *--------------------------------------------------------------------------*/
-#if defined(CONFIG_SYS_PCI_MASTER_INIT)
- pci_master_init(hose); /* Let board setup pci master */
-#else
- out32r( PCIL0_POM0SA, 0 ); /* disable */
- out32r( PCIL0_POM1SA, 0 ); /* disable */
- out32r( PCIL0_POM2SA, 0 ); /* disable */
-#if defined(CONFIG_440SPE)
- out32r( PCIL0_POM0LAL, 0x10000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- out32r( PCIL0_POM0LAL, 0x20000000 );
- out32r( PCIL0_POM0LAH, 0x0000000c );
-#else
- out32r( PCIL0_POM0LAL, 0x00000000 );
- out32r( PCIL0_POM0LAH, 0x00000003 );
-#endif
- out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
- out32r( PCIL0_POM0PCIAH, 0x00000000 );
- out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
- out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 );
-#endif
-
- /*--------------------------------------------------------------------------+
- * PCI host configuration -- we don't make any assumptions here ... the
- * _board_must_indicate_ what to do -- there's just too many runtime
- * scenarios in environments like cPCI, PPMC, etc. to make a determination
- * based on hard-coded values or state of arbiter enable.
- *--------------------------------------------------------------------------*/
- if (is_pci_host(hose)) {
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \
- !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX)
- out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER);
-#endif
- hose->last_busno = pci_hose_scan(hose);
- }
- return hose->last_busno;
-}
-
-void pci_init_board(void)
-{
- int busno;
-
- busno = pci_440_init (&ppc440_hose);
-#if (defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- !defined(CONFIG_PCI_DISABLE_PCIE)
- pcie_setup_hoses(busno + 1);
-#endif
-}
-
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_405EX)
-void pci_init_board(void)
-{
-#ifdef CONFIG_PCI_SCAN_SHOW
- printf("PCI: Bus Dev VenId DevId Class Int\n");
-#endif
- pcie_setup_hoses(0);
-}
-#endif /* CONFIG_405EX */
-
-#endif /* CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
deleted file mode 100644
index 10b58b7..0000000
--- a/cpu/ppc4xx/4xx_pcie.c
+++ /dev/null
@@ -1,1298 +0,0 @@
-/*
- * (C) Copyright 2006 - 2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Copyright (c) 2005 Cisco Systems. All rights reserved.
- * Roland Dreier <rolandd@cisco.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <pci.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/errno.h>
-
-#if (defined(CONFIG_440SPE) || defined(CONFIG_405EX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)) && \
- defined(CONFIG_PCI) && !defined(CONFIG_PCI_DISABLE_PCIE)
-
-#include <asm/4xx_pcie.h>
-
-enum {
- PTYPE_ENDPOINT = 0x0,
- PTYPE_LEGACY_ENDPOINT = 0x1,
- PTYPE_ROOT_PORT = 0x4,
-
- LNKW_X1 = 0x1,
- LNKW_X4 = 0x4,
- LNKW_X8 = 0x8
-};
-
-static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS];
-
-/*
- * Per default, all cards are present, so we need to check if the
- * link comes up.
- */
-int __board_pcie_card_present(int port)
-{
- return 1;
-}
-int board_pcie_card_present(int port)
- __attribute__((weak, alias("__board_pcie_card_present")));
-
-/*
- * Some boards have runtime detection of the first and last PCIe
- * slot used, so let's provide weak default functions for the
- * common version.
- */
-int __board_pcie_first(void)
-{
- return 0;
-}
-int board_pcie_first(void)
- __attribute__((weak, alias("__board_pcie_first")));
-
-int __board_pcie_last(void)
-{
- return CONFIG_SYS_PCIE_NR_PORTS - 1;
-}
-int board_pcie_last(void)
- __attribute__((weak, alias("__board_pcie_last")));
-
-void __board_pcie_setup_port(int port, int rootpoint)
-{
- /* noting in this weak default implementation */
-}
-void board_pcie_setup_port(int port, int rootpoint)
- __attribute__((weak, alias("__board_pcie_setup_port")));
-
-void pcie_setup_hoses(int busno)
-{
- struct pci_controller *hose;
- int i, bus;
- int ret = 0;
- char *env;
- unsigned int delay;
- int first = board_pcie_first();
- int last = board_pcie_last();
-
- /*
- * Assume we're called after the PCI(X) hose(s) are initialized,
- * which takes bus ID 0... and therefore start numbering PCIe's
- * from the next number.
- */
- bus = busno;
-
- for (i = first; i <= last; i++) {
- /*
- * Some boards (e.g. Katmai) can detects via hardware
- * if a PCIe card is plugged, so let's check this.
- */
- if (!board_pcie_card_present(i))
- continue;
-
- if (is_end_point(i)) {
- board_pcie_setup_port(i, 0);
- ret = ppc4xx_init_pcie_endport(i);
- } else {
- board_pcie_setup_port(i, 1);
- ret = ppc4xx_init_pcie_rootport(i);
- }
- if (ret == -ENODEV)
- continue;
- if (ret) {
- printf("PCIE%d: initialization as %s failed\n", i,
- is_end_point(i) ? "endpoint" : "root-complex");
- continue;
- }
-
- hose = &pcie_hose[i];
- hose->first_busno = bus;
- hose->last_busno = bus;
- hose->current_busno = bus;
-
- /* setup mem resource */
- pci_set_region(hose->regions + 0,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE,
- CONFIG_SYS_PCIE_MEMSIZE,
- PCI_REGION_MEM);
- hose->region_count = 1;
- pci_register_hose(hose);
-
- if (is_end_point(i)) {
- ppc4xx_setup_pcie_endpoint(hose, i);
- /*
- * Reson for no scanning is endpoint can not generate
- * upstream configuration accesses.
- */
- } else {
- ppc4xx_setup_pcie_rootpoint(hose, i);
- env = getenv ("pciscandelay");
- if (env != NULL) {
- delay = simple_strtoul(env, NULL, 10);
- if (delay > 5)
- printf("Warning, expect noticable delay before "
- "PCIe scan due to 'pciscandelay' value!\n");
- mdelay(delay * 1000);
- }
-
- /*
- * Config access can only go down stream
- */
- hose->last_busno = pci_hose_scan(hose);
- bus = hose->last_busno + 1;
- }
- }
-}
-
-static int validate_endpoint(struct pci_controller *hose)
-{
- if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
- return (is_end_point(0));
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
- return (is_end_point(1));
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
- return (is_end_point(2));
-#endif
-
- return 0;
-}
-
-static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
-{
- u8 *base = (u8*)hose->cfg_data;
-
- /* use local configuration space for the first bus */
- if (PCI_BUS(devfn) == 0) {
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
- base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
-#endif
- }
-
- return base;
-}
-
-static void pcie_dmer_disable(void)
-{
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
-#endif
-}
-
-static void pcie_dmer_enable(void)
-{
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE0_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
- mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
-#endif
-}
-
-static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 *val) {
-
- u8 *address;
- *val = 0;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * NOTICE: configuration space ranges are currenlty mapped only for
- * the first 16 buses, so such limit must be imposed. In case more
- * buses are required the TLB settings in board/amcc/<board>/init.S
- * need to be altered accordingly (one bus takes 1 MB of memory space).
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- /*
- * Only single device/single function is supported for the primary and
- * secondary buses of the 440SPe host bridge.
- */
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Reading from configuration space of non-existing device can
- * generate transaction errors. For the read duration we suppress
- * assertion of machine check exceptions to avoid those.
- */
- pcie_dmer_disable ();
-
- debug("%s: cfg_data=%08x offset=%08x\n", __func__, hose->cfg_data, offset);
- switch (len) {
- case 1:
- *val = in_8(hose->cfg_data + offset);
- break;
- case 2:
- *val = in_le16((u16 *)(hose->cfg_data + offset));
- break;
- default:
- *val = in_le32((u32*)(hose->cfg_data + offset));
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-static int pcie_write_config(struct pci_controller *hose, unsigned int devfn,
- int offset, int len, u32 val) {
-
- u8 *address;
-
- if (validate_endpoint(hose))
- return 0; /* No upstream config access */
-
- /*
- * Bus numbers are relative to hose->first_busno
- */
- devfn -= PCI_BDF(hose->first_busno, 0, 0);
-
- /*
- * Same constraints as in pcie_read_config().
- */
- if (PCI_BUS(devfn) >= 16)
- return 0;
-
- if ((!((PCI_FUNC(devfn) == 0) && (PCI_DEV(devfn) == 0))) &&
- ((PCI_BUS(devfn) == 0) || (PCI_BUS(devfn) == 1)))
- return 0;
-
- address = pcie_get_base(hose, devfn);
- offset += devfn << 4;
-
- /*
- * Suppress MCK exceptions, similar to pcie_read_config()
- */
- pcie_dmer_disable ();
-
- switch (len) {
- case 1:
- out_8(hose->cfg_data + offset, val);
- break;
- case 2:
- out_le16((u16 *)(hose->cfg_data + offset), val);
- break;
- default:
- out_le32((u32 *)(hose->cfg_data + offset), val);
- break;
- }
-
- pcie_dmer_enable ();
-
- return 0;
-}
-
-int pcie_read_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 1, &v);
- *val = (u8)v;
- return rv;
-}
-
-int pcie_read_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 2, &v);
- *val = (u16)v;
- return rv;
-}
-
-int pcie_read_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 *val)
-{
- u32 v;
- int rv;
-
- rv = pcie_read_config(hose, dev, offset, 3, &v);
- *val = (u32)v;
- return rv;
-}
-
-int pcie_write_config_byte(struct pci_controller *hose,pci_dev_t dev,int offset,u8 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,1,val);
-}
-
-int pcie_write_config_word(struct pci_controller *hose,pci_dev_t dev,int offset,u16 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,2,(u32 )val);
-}
-
-int pcie_write_config_dword(struct pci_controller *hose,pci_dev_t dev,int offset,u32 val)
-{
- return pcie_write_config(hose,(u32)dev,offset,3,(u32 )val);
-}
-
-#if defined(CONFIG_440SPE)
-static void ppc4xx_setup_utl(u32 port) {
-
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), 0x20000000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0x68782800);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), 0x20001000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0x68782800);
- break;
-
- case 2:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE2), 0x0000000c);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE2), 0x20002000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE2), 0x00007001);
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_PBBSZ, 0x53000000);
- out_be32(utl_base + PEUTL_IPHBSZ, 0x08000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x10000000);
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066);
-}
-
-static int check_error(void)
-{
- u32 valPE0, valPE1, valPE2;
- int err = 0;
-
- /* SDR0_PEGPLLLCT1 reset */
- if (!(valPE0 = SDR_READ(PESDR0_PLLLCT1) & 0x01000000))
- printf("PCIE: SDR0_PEGPLLLCT1 reset error 0x%x\n", valPE0);
-
- valPE0 = SDR_READ(PESDR0_RCSSET);
- valPE1 = SDR_READ(PESDR1_RCSSET);
- valPE2 = SDR_READ(PESDR2_RCSSET);
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & 0x01000000) ||
- !(valPE1 & 0x01000000) ||
- !(valPE2 & 0x01000000)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & 0x00010000) ||
- !(valPE1 & 0x00010000) ||
- !(valPE2 & 0x00010000)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & 0x00001000) ||
- (valPE1 & 0x00001000) ||
- (valPE2 & 0x00001000)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & 0x10000000) ||
- (valPE1 & 0x10000000) ||
- (valPE2 & 0x10000000)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & 0x00100000) ||
- (valPE1 & 0x00100000) ||
- (valPE2 & 0x00100000)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET shutdown */
- if ((valPE0 & 0x00000100) ||
- (valPE1 & 0x00000100) ||
- (valPE2 & 0x00000100)) {
- printf("PCIE: SDR0_PExRCSSET shutdown error\n");
- err = -1;
- }
- return err;
-}
-
-/*
- * Initialize PCI Express core
- */
-int ppc4xx_init_pcie(void)
-{
- int time_out = 20;
-
- /* Set PLL clock receiver to LVPECL */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) | 1 << 28);
-
- if (check_error()) {
- printf("ERROR: failed to set PCIe reference clock receiver --"
- "PESDR0_PLLLCT1 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT1));
-
- return -1;
- }
-
- /* Did resistance calibration work? */
- if (!(SDR_READ(PESDR0_PLLLCT2) & 0x10000)) {
- printf("ERROR: PCIe resistance calibration failed --"
- "PESDR0_PLLLCT2 = 0x%08x\n", SDR_READ(PESDR0_PLLLCT2));
-
- return -1;
- }
- /* De-assert reset of PCIe PLL, wait for lock */
- SDR_WRITE(PESDR0_PLLLCT1, SDR_READ(PESDR0_PLLLCT1) & ~(1 << 24));
- udelay(300); /* 300 uS is maximum time lock should take */
-
- while (time_out) {
- if (!(SDR_READ(PESDR0_PLLLCT3) & 0x10000000)) {
- time_out--;
- udelay(20); /* Wait 20 uS more if needed */
- } else
- break;
- }
- if (!time_out) {
- printf("ERROR: PCIe PLL VCO output not locked to ref clock --"
- "PESDR0_PLLLCTS=0x%08x\n", SDR_READ(PESDR0_PLLLCT3));
-
- return -1;
- }
- return 0;
-}
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-static void ppc4xx_setup_utl(u32 port)
-{
- volatile void *utl_base = NULL;
-
- /*
- * Map UTL registers at 0x0801_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
- + 0x1000);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
- break;
- }
- utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32(utl_base + PEUTL_PBCTL, 0x0800000c); /* PLBME, CRRE */
- out_be32(utl_base + PEUTL_OUTTR, 0x08000000);
- out_be32(utl_base + PEUTL_INTR, 0x02000000);
- out_be32(utl_base + PEUTL_OPDBSZ, 0x04000000); /* OPD = 512 Bytes */
- out_be32(utl_base + PEUTL_PBBSZ, 0x00000000); /* Max 512 Bytes */
- out_be32(utl_base + PEUTL_IPHBSZ, 0x02000000);
- out_be32(utl_base + PEUTL_IPDBSZ, 0x04000000); /* IPD = 512 Bytes */
- out_be32(utl_base + PEUTL_RCIRQEN, 0x00f00000);
- out_be32(utl_base + PEUTL_PCTL, 0x80800066); /* VRB,TXE,timeout=default */
-}
-
-/*
- * TODO: double check PCI express SDR based on the latest user manual
- * Some registers specified here no longer exist.. has to be
- * updated based on the final EAS spec.
- */
-static int check_error(void)
-{
- u32 valPE0, valPE1;
- int err = 0;
-
- valPE0 = SDR_READ(SDRN_PESDR_RCSSET(0));
- valPE1 = SDR_READ(SDRN_PESDR_RCSSET(1));
-
- /* SDR0_PExRCSSET rstgu */
- if (!(valPE0 & PESDRx_RCSSET_RSTGU) || !(valPE1 & PESDRx_RCSSET_RSTGU)) {
- printf("PCIE: SDR0_PExRCSSET rstgu error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstdl */
- if (!(valPE0 & PESDRx_RCSSET_RSTDL) || !(valPE1 & PESDRx_RCSSET_RSTDL)) {
- printf("PCIE: SDR0_PExRCSSET rstdl error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rstpyn */
- if ((valPE0 & PESDRx_RCSSET_RSTPYN) || (valPE1 & PESDRx_RCSSET_RSTPYN)) {
- printf("PCIE: SDR0_PExRCSSET rstpyn error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET hldplb */
- if ((valPE0 & PESDRx_RCSSET_HLDPLB) || (valPE1 & PESDRx_RCSSET_HLDPLB)) {
- printf("PCIE: SDR0_PExRCSSET hldplb error\n");
- err = -1;
- }
-
- /* SDR0_PExRCSSET rdy */
- if ((valPE0 & PESDRx_RCSSET_RDY) || (valPE1 & PESDRx_RCSSET_RDY)) {
- printf("PCIE: SDR0_PExRCSSET rdy error\n");
- err = -1;
- }
-
- return err;
-}
-
-/*
- * Initialize PCI Express core as described in User Manual
- * TODO: double check PE SDR PLL Register with the updated user manual.
- */
-int ppc4xx_init_pcie(void)
-{
- if (check_error())
- return -1;
-
- return 0;
-}
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX)
-static void ppc4xx_setup_utl(u32 port)
-{
- u32 utl_base;
-
- /*
- * Map UTL registers at 0xef4f_n000 (4K 0xfff mask) PEGPLn_REGMSK
- */
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
- break;
-
- case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
- mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
- mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
-
- break;
- }
- utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
-
- /*
- * Set buffer allocations and then assert VRB and TXE.
- */
- out_be32((u32 *)(utl_base + PEUTL_OUTTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_INTR), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_OPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_PBBSZ), 0x21000000);
- out_be32((u32 *)(utl_base + PEUTL_IPHBSZ), 0x02000000);
- out_be32((u32 *)(utl_base + PEUTL_IPDBSZ), 0x04000000);
- out_be32((u32 *)(utl_base + PEUTL_RCIRQEN), 0x00f00000);
- out_be32((u32 *)(utl_base + PEUTL_PCTL), 0x80800066);
-
- out_be32((u32 *)(utl_base + PEUTL_PBCTL), 0x0800000c);
- out_be32((u32 *)(utl_base + PEUTL_RCSTA),
- in_be32((u32 *)(utl_base + PEUTL_RCSTA)) | 0x000040000);
-}
-
-int ppc4xx_init_pcie(void)
-{
- /*
- * Nothing to do on 405EX
- */
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-/*
- * Board-specific pcie initialization
- * Platform code can reimplement ppc4xx_init_pcie_port_hw() if needed
- */
-
-/*
- * Initialize various parts of the PCI Express core for our port:
- *
- * - Set as a root port and enable max width
- * (PXIE0 -> X8, PCIE1 and PCIE2 -> X4).
- * - Set up UTL configuration.
- * - Increase SERDES drive strength to levels suggested by AMCC.
- * - De-assert RSTPYN, RSTDL and RSTGU.
- *
- * NOTICE for 440SPE revB chip: PESDRn_UTLSET2 is not set - we leave it
- * with default setting 0x11310000. The register has new fields,
- * PESDRn_UTLSET2[LKINE] in particular: clearing it leads to PCIE core
- * hang.
- */
-#if defined(CONFIG_440SPE)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val = 1 << 24;
- u32 utlset1;
-
- if (rootport) {
- val = PTYPE_ROOT_PORT << 20;
- utlset1 = 0x21222222;
- } else {
- val = PTYPE_LEGACY_ENDPOINT << 20;
- utlset1 = 0x20222222;
- }
-
- if (port == 0)
- val |= LNKW_X8 << 12;
- else
- val |= LNKW_X4 << 12;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- if (!ppc440spe_revB())
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x11000000);
- SDR_WRITE(SDRN_PESDR_HSSL0SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL1SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL2SET1(port), 0x35000000);
- SDR_WRITE(SDRN_PESDR_HSSL3SET1(port), 0x35000000);
- if (port == 0) {
- SDR_WRITE(PESDR0_HSSL4SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL5SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL6SET1, 0x35000000);
- SDR_WRITE(PESDR0_HSSL7SET1, 0x35000000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port), (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(1 << 24 | 1 << 16)) | 1 << 12);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
- u32 utlset1;
-
- if (rootport)
- val = PTYPE_ROOT_PORT << 20;
- else
- val = PTYPE_LEGACY_ENDPOINT << 20;
-
- if (port == 0) {
- val |= LNKW_X1 << 12;
- utlset1 = 0x20000000;
- } else {
- val |= LNKW_X4 << 12;
- utlset1 = 0x20101101;
- }
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), utlset1);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01210000);
-
- switch (port) {
- case 0:
- SDR_WRITE(PESDR0_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR0_L0DRV, 0x00000130);
- SDR_WRITE(PESDR0_L0CLK, 0x00000006);
-
- SDR_WRITE(PESDR0_PHY_CTL_RST,0x10000000);
- break;
-
- case 1:
- SDR_WRITE(PESDR1_L0CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L1CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L2CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L3CDRCTL, 0x00003230);
- SDR_WRITE(PESDR1_L0DRV, 0x00000130);
- SDR_WRITE(PESDR1_L1DRV, 0x00000130);
- SDR_WRITE(PESDR1_L2DRV, 0x00000130);
- SDR_WRITE(PESDR1_L3DRV, 0x00000130);
- SDR_WRITE(PESDR1_L0CLK, 0x00000006);
- SDR_WRITE(PESDR1_L1CLK, 0x00000006);
- SDR_WRITE(PESDR1_L2CLK, 0x00000006);
- SDR_WRITE(PESDR1_L3CLK, 0x00000006);
-
- SDR_WRITE(PESDR1_PHY_CTL_RST,0x10000000);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port), SDR_READ(SDRN_PESDR_RCSSET(port)) |
- (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN));
-
- /* Poll for PHY reset */
- switch (port) {
- case 0:
- while (!(SDR_READ(PESDR0_RSTSTA) & 0x1))
- udelay(10);
- break;
- case 1:
- while (!(SDR_READ(PESDR1_RSTSTA) & 0x1))
- udelay(10);
- break;
- }
-
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- (SDR_READ(SDRN_PESDR_RCSSET(port)) &
- ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) |
- PESDRx_RCSSET_RSTPYN);
-
- return 0;
-}
-#endif /* CONFIG_440SPE */
-
-#if defined(CONFIG_405EX)
-int __ppc4xx_init_pcie_port_hw(int port, int rootport)
-{
- u32 val;
-
- if (rootport)
- val = 0x00401000;
- else
- val = 0x00101000;
-
- SDR_WRITE(SDRN_PESDR_DLPSET(port), val);
- SDR_WRITE(SDRN_PESDR_UTLSET1(port), 0x00000000);
- SDR_WRITE(SDRN_PESDR_UTLSET2(port), 0x01010000);
- SDR_WRITE(SDRN_PESDR_PHYSET1(port), 0x720F0000);
- SDR_WRITE(SDRN_PESDR_PHYSET2(port), 0x70600003);
-
- /* Assert the PE0_PHY reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01010000);
- udelay(1000);
-
- /* deassert the PE0_hotreset */
- if (is_end_point(port))
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01111000);
- else
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x01101000);
-
- /* poll for phy !reset */
- while (!(SDR_READ(SDRN_PESDR_PHYSTA(port)) & 0x00001000))
- ;
-
- /* deassert the PE0_gpl_utl_reset */
- SDR_WRITE(SDRN_PESDR_RCSSET(port), 0x00101000);
-
- if (port == 0)
- mtdcr(DCRN_PEGPL_CFG(PCIE0), 0x10000000); /* guarded on */
- else
- mtdcr(DCRN_PEGPL_CFG(PCIE1), 0x10000000); /* guarded on */
-
- return 0;
-}
-#endif /* CONFIG_405EX */
-
-int ppc4xx_init_pcie_port_hw(int port, int rootport)
-__attribute__((weak, alias("__ppc4xx_init_pcie_port_hw")));
-
-/*
- * We map PCI Express configuration access into the 512MB regions
- *
- * NOTICE: revB is very strict about PLB real addressess and ranges to
- * be mapped for config space; it seems to only work with d_nnnn_nnnn
- * range (hangs the core upon config transaction attempts when set
- * otherwise) while revA uses c_nnnn_nnnn.
- *
- * For 440SPe revA:
- * PCIE0: 0xc_4000_0000
- * PCIE1: 0xc_8000_0000
- * PCIE2: 0xc_c000_0000
- *
- * For 440SPe revB:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- * PCIE2: 0xd_4000_0000
- *
- * For 405EX:
- * PCIE0: 0xa000_0000
- * PCIE1: 0xc000_0000
- *
- * For 460EX/GT:
- * PCIE0: 0xd_0000_0000
- * PCIE1: 0xd_2000_0000
- */
-static inline u64 ppc4xx_get_cfgaddr(int port)
-{
-#if defined(CONFIG_405EX)
- if (port == 0)
- return (u64)CONFIG_SYS_PCIE0_CFGBASE;
- else
- return (u64)CONFIG_SYS_PCIE1_CFGBASE;
-#endif
-#if defined(CONFIG_440SPE)
- if (ppc440spe_revB()) {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000d00000000ULL;
- case 1:
- return 0x0000000d20000000ULL;
- case 2:
- return 0x0000000d40000000ULL;
- }
- } else {
- switch (port) {
- default: /* to satisfy compiler */
- case 0:
- return 0x0000000c40000000ULL;
- case 1:
- return 0x0000000c80000000ULL;
- case 2:
- return 0x0000000cc0000000ULL;
- }
- }
-#endif
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- if (port == 0)
- return 0x0000000d00000000ULL;
- else
- return 0x0000000d20000000ULL;
-#endif
-}
-
-/*
- * 4xx boards as endpoint and root point setup
- * and
- * testing inbound and out bound windows
- *
- * 4xx boards can be plugged into another 4xx boards or you can get PCI-E
- * cable which can be used to setup loop back from one port to another port.
- * Please rememeber that unless there is a endpoint plugged in to root port it
- * will not initialize. It is the same in case of endpoint , unless there is
- * root port attached it will not initialize.
- *
- * In this release of software all the PCI-E ports are configured as either
- * endpoint or rootpoint.In future we will have support for selective ports
- * setup as endpoint and root point in single board.
- *
- * Once your board came up as root point , you can verify by reading
- * /proc/bus/pci/devices. Where you can see the configuration registers
- * of endpoint device attached to the port.
- *
- * Enpoint cofiguration can be verified by connecting 4xx board to any
- * host or another 4xx board. Then try to scan the device. In case of
- * linux use "lspci" or appripriate os command.
- *
- * How do I verify the inbound and out bound windows ? (4xx to 4xx)
- * in this configuration inbound and outbound windows are setup to access
- * sram memroy area. SRAM is at 0x4 0000 0000 , on PLB bus. This address
- * is mapped at 0x90000000. From u-boot prompt write data 0xb000 0000,
- * This is waere your POM(PLB out bound memory window) mapped. then
- * read the data from other 4xx board's u-boot prompt at address
- * 0x9000 0000(SRAM). Data should match.
- * In case of inbound , write data to u-boot command prompt at 0xb000 0000
- * which is mapped to 0x4 0000 0000. Now on rootpoint yucca u-boot prompt check
- * data at 0x9000 0000(SRAM).Data should match.
- */
-int ppc4xx_init_pcie_port(int port, int rootport)
-{
- static int core_init;
- volatile u32 val = 0;
- int attempts;
- u64 addr;
- u32 low, high;
-
- if (!core_init) {
- if (ppc4xx_init_pcie())
- return -1;
- ++core_init;
- }
-
- /*
- * Initialize various parts of the PCI Express core for our port
- */
- ppc4xx_init_pcie_port_hw(port, rootport);
-
- /*
- * Notice: the following delay has critical impact on device
- * initialization - if too short (<50ms) the link doesn't get up.
- */
- mdelay(100);
-
- val = SDR_READ(SDRN_PESDR_RCSSTS(port));
- if (val & (1 << 20)) {
- printf("PCIE%d: PGRST failed %08x\n", port, val);
- return -1;
- }
-
- /*
- * Verify link is up
- */
- val = SDR_READ(SDRN_PESDR_LOOP(port));
- if (!(val & 0x00001000)) {
- printf("PCIE%d: link is not up.\n", port);
- return -ENODEV;
- }
-
- /*
- * Setup UTL registers - but only on revA!
- * We use default settings for revB chip.
- */
- if (!ppc440spe_revB())
- ppc4xx_setup_utl(port);
-
- /*
- * We map PCI Express configuration access into the 512MB regions
- */
- addr = ppc4xx_get_cfgaddr(port);
- low = U64_TO_U32_LOW(addr);
- high = U64_TO_U32_HIGH(addr);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE0), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE0), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE0), 0xe0000001); /* 512MB region, valid */
- break;
- case 1:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE1), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
- mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
- mtdcr(DCRN_PEGPL_CFGMSK(PCIE2), 0xe0000001); /* 512MB region, valid */
- break;
-#endif
- }
-
- /*
- * Check for VC0 active and assert RDY.
- */
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 16))) {
- if (!(attempts--)) {
- printf("PCIE%d: VC0 not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
- SDR_WRITE(SDRN_PESDR_RCSSET(port),
- SDR_READ(SDRN_PESDR_RCSSET(port)) | 1 << 20);
- mdelay(100);
-
- return 0;
-}
-
-int ppc4xx_init_pcie_rootport(int port)
-{
- return ppc4xx_init_pcie_port(port, 1);
-}
-
-int ppc4xx_init_pcie_endport(int port)
-{
- return ppc4xx_init_pcie_port(port, 0);
-}
-
-void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- volatile void *rmbase = NULL;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set bus numbers on our root port
- */
- out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
- out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
- out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
- in_le32(mbase + PECFG_POM0LAL));
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE0)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
- mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE2)),
- mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE2)));
- break;
-#endif
- }
-
- /* Set up 4GB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
- out_le32(mbase + PECFG_BAR0HMPA, 0x7ffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffff0000);
- out_le32(mbase + PECFG_PIM01SAL, 0x00000000);
- out_le32(mbase + PECFG_PIM0LAL, 0);
- out_le32(mbase + PECFG_PIM0LAH, 0);
- out_le32(mbase + PECFG_PIM1LAL, 0x00000000);
- out_le32(mbase + PECFG_PIM1LAH, 0x00000004);
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-
- /* Set Device and Vendor Id */
- out_le16(mbase + 0x200, 0xaaa0 + port);
- out_le16(mbase + 0x202, 0xbed0 + port);
-
- /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */
- out_le32(mbase + 0x208, 0x06040001);
-
- printf("PCIE%d: successfully set as root-complex\n", port);
-}
-
-int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
-{
- volatile void *mbase = NULL;
- int attempts = 0;
-
- pci_set_ops(hose,
- pcie_read_config_byte,
- pcie_read_config_word,
- pcie_read_config_dword,
- pcie_write_config_byte,
- pcie_write_config_word,
- pcie_write_config_dword);
-
- switch (port) {
- case 0:
- mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
- break;
- case 1:
- mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
- break;
-#if defined(CONFIG_SYS_PCIE2_CFGBASE)
- case 2:
- mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
- hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
- break;
-#endif
- }
-
- /*
- * Set up outbound translation to hose->mem_space from PLB
- * addresses at an offset of 0xd_0000_0000. We set the low
- * bits of the mask to 11 to turn off splitting into 8
- * subregions and to enable the outbound translation.
- */
- out_le32(mbase + PECFG_POM0LAH, 0x00001ff8);
- out_le32(mbase + PECFG_POM0LAL, 0x00001000);
-
- switch (port) {
- case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
- case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#if CONFIG_SYS_PCIE_NR_PORTS > 2
- case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
- port * CONFIG_SYS_PCIE_MEMSIZE);
- mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
- mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
- break;
-#endif
- }
-
- /* Set up 64MB inbound memory window at 0 */
- out_le32(mbase + PCI_BASE_ADDRESS_0, 0);
- out_le32(mbase + PCI_BASE_ADDRESS_1, 0);
-
- out_le32(mbase + PECFG_PIM01SAH, 0xffffffff);
- out_le32(mbase + PECFG_PIM01SAL, 0xfc000000);
-
- /* Setup BAR0 */
- out_le32(mbase + PECFG_BAR0HMPA, 0x7fffffff);
- out_le32(mbase + PECFG_BAR0LMPA, 0xfc000000 | PCI_BASE_ADDRESS_MEM_TYPE_64);
-
- /* Disable BAR1 & BAR2 */
- out_le32(mbase + PECFG_BAR1MPA, 0);
- out_le32(mbase + PECFG_BAR2HMPA, 0);
- out_le32(mbase + PECFG_BAR2LMPA, 0);
-
- out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIMEN, 0x1);
-
- /* Enable I/O, Mem, and Busmaster cycles */
- out_le16((u16 *)(mbase + PCI_COMMAND),
- in_le16((u16 *)(mbase + PCI_COMMAND)) |
- PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- out_le16(mbase + 0x200, 0xcaad); /* Setting vendor ID */
- out_le16(mbase + 0x202, 0xfeed); /* Setting device ID */
-
- /* Set Class Code to Processor/PPC */
- out_le32(mbase + 0x208, 0x0b200001);
-
- attempts = 10;
- while(!(SDR_READ(SDRN_PESDR_RCSSTS(port)) & (1 << 8))) {
- if (!(attempts--)) {
- printf("PCIE%d: BME not active\n", port);
- return -1;
- }
- mdelay(1000);
- }
-
- printf("PCIE%d: successfully set as endpoint\n", port);
-
- return 0;
-}
-#endif /* CONFIG_440SPE && CONFIG_PCI */
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
deleted file mode 100644
index 8de6542..0000000
--- a/cpu/ppc4xx/4xx_uart.c
+++ /dev/null
@@ -1,878 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-#include <ppc4xx.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-#include <malloc.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_440)
-
-#if defined(CONFIG_440)
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
-#else
-#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
-#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
-#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
-#endif
-
-#if defined(CONFIG_440GP)
-#define CR0_MASK 0x3fff0000
-#define CR0_EXTCLK_ENA 0x00600000
-#define CR0_UDIV_POS 16
-#define UDIV_SUBTRACT 1
-#define UART0_SDR CPC0_CR0
-#define MFREG(a, d) d = mfdcr(a)
-#define MTREG(a, d) mtdcr(a, d)
-#else /* #if defined(CONFIG_440GP) */
-/* all other 440 PPC's access clock divider via sdr register */
-#define CR0_MASK 0xdfffffff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_SDR SDR0_UART2
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART3_SDR SDR0_UART3
-#endif
-#define MFREG(a, d) mfsdr(a, d)
-#define MTREG(a, d) mtsdr(a, d)
-#endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define UCR0_MASK 0x0000007f
-#define UCR1_MASK 0x00007f00
-#define UCR0_UDIV_POS 0
-#define UCR1_UDIV_POS 8
-#define UDIV_MAX 127
-#elif defined(CONFIG_405EX)
-#define UART0_BASE 0xef600200
-#define UART1_BASE 0xef600300
-#define CR0_MASK 0x000000ff
-#define CR0_EXTCLK_ENA 0x00800000
-#define CR0_UDIV_POS 0
-#define UDIV_SUBTRACT 0
-#define UART0_SDR SDR0_UART0
-#define UART1_SDR SDR0_UART1
-#else /* CONFIG_405GP || CONFIG_405CR */
-#define UART0_BASE 0xef600300
-#define UART1_BASE 0xef600400
-#define CR0_MASK 0x00001fff
-#define CR0_EXTCLK_ENA 0x000000c0
-#define CR0_UDIV_POS 1
-#define UDIV_MAX 32
-#endif
-
-/* using serial port 0 or 1 as U-Boot console ? */
-#if defined(CONFIG_UART1_CONSOLE)
-#define ACTING_UART0_BASE UART1_BASE
-#define ACTING_UART1_BASE UART0_BASE
-#else
-#define ACTING_UART0_BASE UART0_BASE
-#define ACTING_UART1_BASE UART1_BASE
-#endif
-
-#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-#error "External serial clock not supported on AMCC PPC405EP!"
-#endif
-
-#define UART_RBR 0x00
-#define UART_THR 0x00
-#define UART_IER 0x01
-#define UART_IIR 0x02
-#define UART_FCR 0x02
-#define UART_LCR 0x03
-#define UART_MCR 0x04
-#define UART_LSR 0x05
-#define UART_MSR 0x06
-#define UART_SCR 0x07
-#define UART_DLL 0x00
-#define UART_DLM 0x01
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRDataReady1 0x01
-#define asyncLSROverrunError1 0x02
-#define asyncLSRParityError1 0x04
-#define asyncLSRFramingError1 0x08
-#define asyncLSRBreakInterrupt1 0x10
-#define asyncLSRTxHoldEmpty1 0x20
-#define asyncLSRTxShiftEmpty1 0x40
-#define asyncLSRRxFifoError1 0x80
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-/*-----------------------------------------------------------------------------+
- | Fifo
- +-----------------------------------------------------------------------------*/
-typedef struct {
- char *rx_buffer;
- ulong rx_put;
- ulong rx_get;
-} serial_buffer_t;
-
-volatile static serial_buffer_t buf_info;
-#endif
-
-static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
-{
- PPC4xx_SYS_INFO sys_info;
- u8 val;
-
- get_sys_info(&sys_info);
-
- /* Correct UART frequency in bd-info struct now that
- * the UART divisor is available
- */
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
-#else
- gd->uart_clk = sys_info.freqUART / udiv;
-#endif
-
- out_8((u8 *)base + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)base + UART_DLL, bdiv); /* set baudrate divisor */
- out_8((u8 *)base + UART_DLM, bdiv >> 8); /* set baudrate divisor */
- out_8((u8 *)base + UART_LCR, 0x03); /* clear DLAB; set 8 bits, no parity */
- out_8((u8 *)base + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)base + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)base + UART_LSR); /* clear line status */
- val = in_8((u8 *)base + UART_RBR); /* read receive buffer */
- out_8((u8 *)base + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)base + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
- !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
-
- get_sys_info(&sysinfo);
-
- udiv = 32; /* Assume lowest possible serial clk */
- div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
- umin = sysinfo.pllOpbDiv << 1; /* 2 x OPB divisor */
- diff = 32; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (32) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 32; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- *pbdiv = div / udiv;
-}
-
-#elif defined(CONFIG_405EZ)
-
-static void serial_divs (int baudrate, unsigned long *pudiv,
- unsigned short *pbdiv)
-{
- sys_info_t sysinfo;
- unsigned long div; /* total divisor udiv * bdiv */
- unsigned long umin; /* minimum udiv */
- unsigned short diff; /* smallest diff */
- unsigned long udiv; /* best udiv */
- unsigned short idiff; /* current diff */
- unsigned short ibdiv; /* current bdiv */
- unsigned long i;
- unsigned long est; /* current estimate */
- unsigned long plloutb;
- unsigned long cpr_pllc;
- u32 reg;
-
- /* check the pll feedback source */
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- get_sys_info(&sysinfo);
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) *
- sysinfo.pllFbkDiv) / sysinfo.pllFwdDivB);
- udiv = 256; /* Assume lowest possible serial clk */
- div = plloutb / (16 * baudrate); /* total divisor */
- umin = (plloutb / get_OPB_freq()) << 1; /* 2 x OPB divisor */
- diff = 256; /* highest possible */
-
- /* i is the test udiv value -- start with the largest
- * possible (256) to minimize serial clock and constrain
- * search to umin.
- */
- for (i = 256; i > umin; i--) {
- ibdiv = div / i;
- est = i * ibdiv;
- idiff = (est > div) ? (est-div) : (div-est);
- if (idiff == 0) {
- udiv = i;
- break; /* can't do better */
- } else if (idiff < diff) {
- udiv = i; /* best so far */
- diff = idiff; /* update lowest diff*/
- }
- }
-
- *pudiv = udiv;
- mfcpr(CPC0_PERD0, reg);
- reg &= ~0x0000ffff;
- reg |= ((udiv - 0) << 8) | (udiv - 0);
- mtcpr(CPC0_PERD0, reg);
- *pbdiv = div / udiv;
-}
-#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-#if defined(CONFIG_440)
-int serial_init_dev(unsigned long base)
-{
- unsigned long reg;
- unsigned long udiv;
- unsigned short bdiv;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- unsigned long tmp;
-#endif
-
- MFREG(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- /* For 440, the cpu clock is on divider chain A, UART on divider
- * chain B ... so cpu clock is irrelevant. Get the "optimized"
- * values that are subject to the 1/2 opb clock constraint
- */
- serial_divs (gd->baudrate, &udiv, &bdiv);
-#endif
-
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- MTREG(UART0_SDR, reg);
-#if defined(UART1_SDR)
- MTREG(UART1_SDR, reg);
-#endif
-#if defined(UART2_SDR)
- MTREG(UART2_SDR, reg);
-#endif
-#if defined(UART3_SDR)
- MTREG(UART3_SDR, reg);
-#endif
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#else /* !defined(CONFIG_440) */
-
-int serial_init_dev (unsigned long base)
-{
- unsigned long reg;
- unsigned long tmp;
- unsigned long clk;
- unsigned long udiv;
- unsigned short bdiv;
-
-#ifdef CONFIG_405EX
- clk = tmp = 0;
- mfsdr(UART0_SDR, reg);
- reg &= ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- reg |= CR0_EXTCLK_ENA;
- udiv = 1;
- tmp = gd->baudrate * 16;
- bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
-#else
- serial_divs(gd->baudrate, &udiv, &bdiv);
-#endif
- reg |= (udiv - UDIV_SUBTRACT) << CR0_UDIV_POS; /* set the UART divisor */
-
- /*
- * Configure input clock to baudrate generator for all
- * available serial ports here
- */
- mtsdr(UART0_SDR, reg);
-
-#if defined(UART1_SDR)
- mtsdr(UART1_SDR, reg);
-#endif
-
-#elif defined(CONFIG_405EZ)
- serial_divs(gd->baudrate, &udiv, &bdiv);
- clk = tmp = reg = 0;
-#else
-#ifdef CONFIG_405EP
- reg = mfdcr(CPC0_UCR) & ~(UCR0_MASK | UCR1_MASK);
- clk = gd->cpu_clk;
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
- reg |= (udiv) << UCR0_UDIV_POS; /* set the UART divisor */
- reg |= (udiv) << UCR1_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_UCR, reg);
-#else /* CONFIG_405EP */
- reg = mfdcr(CPC0_CR0) & ~CR0_MASK;
-#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
- clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
- udiv = 1;
- reg |= CR0_EXTCLK_ENA;
-#else
- clk = gd->cpu_clk;
-#ifdef CONFIG_SYS_405_UART_ERRATA_59
- udiv = 31; /* Errata 59: stuck at 31 */
-#else
- tmp = CONFIG_SYS_BASE_BAUD * 16;
- udiv = (clk + tmp / 2) / tmp;
- if (udiv > UDIV_MAX) /* max. n bits for udiv */
- udiv = UDIV_MAX;
-#endif
-#endif
- reg |= (udiv - 1) << CR0_UDIV_POS; /* set the UART divisor */
- mtdcr (CPC0_CR0, reg);
-#endif /* CONFIG_405EP */
- tmp = gd->baudrate * udiv * 16;
- bdiv = (clk + tmp / 2) / tmp;
-#endif /* CONFIG_405EX */
-
- serial_init_common(base, udiv, bdiv);
-
- return (0);
-}
-
-#endif /* if defined(CONFIG_440) */
-
-void serial_setbrg_dev(unsigned long base)
-{
- serial_init_dev(base);
-}
-
-void serial_putc_dev(unsigned long base, const char c)
-{
- int i;
-
- if (c == '\n')
- serial_putc_dev(base, '\r');
-
- /* check THRE bit, wait for transmiter available */
- for (i = 1; i < 3500; i++) {
- if ((in_8((u8 *)base + UART_LSR) & 0x20) == 0x20)
- break;
- udelay (100);
- }
-
- out_8((u8 *)base + UART_THR, c); /* put character out */
-}
-
-void serial_puts_dev (unsigned long base, const char *s)
-{
- while (*s)
- serial_putc_dev (base, *s++);
-}
-
-int serial_getc_dev (unsigned long base)
-{
- unsigned char status = 0;
-
- while (1) {
-#if defined(CONFIG_HW_WATCHDOG)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
-#endif /* CONFIG_HW_WATCHDOG */
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)base));
-}
-
-int serial_tstc_dev (unsigned long base)
-{
- unsigned char status;
-
- status = in_8((u8 *)base + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- return (1);
-
- if ((status & ( asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)base + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
-
- return 0;
-}
-
-#ifdef CONFIG_SERIAL_SOFTWARE_FIFO
-
-void serial_isr (void *arg)
-{
- int space;
- int c;
- const int rx_get = buf_info.rx_get;
- int rx_put = buf_info.rx_put;
-
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- while (serial_tstc_dev (ACTING_UART0_BASE)) {
- c = serial_getc_dev (ACTING_UART0_BASE);
- if (space) {
- buf_info.rx_buffer[rx_put++] = c;
- space--;
- }
- if (rx_put == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_put = 0;
- if (space < CONFIG_SERIAL_SOFTWARE_FIFO / 4) {
- /* Stop flow by setting RTS inactive */
- out_8((u8 *)ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) &
- (0xFF ^ 0x02));
- }
- }
- buf_info.rx_put = rx_put;
-}
-
-void serial_buffered_init (void)
-{
- serial_puts ("Switching to interrupt driven serial input mode.\n");
- buf_info.rx_buffer = malloc (CONFIG_SERIAL_SOFTWARE_FIFO);
- buf_info.rx_put = 0;
- buf_info.rx_get = 0;
-
- if (in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10)
- serial_puts ("Check CTS signal present on serial port: OK.\n");
- else
- serial_puts ("WARNING: CTS signal not present on serial port.\n");
-
- irq_install_handler ( VECNUM_U0 /*UART0 */ /*int vec */ ,
- serial_isr /*interrupt_handler_t *handler */ ,
- (void *) &buf_info /*void *arg */ );
-
- /* Enable "RX Data Available" Interrupt on UART */
- out_8(ACTING_UART0_BASE + UART_IER, 0x01);
- /* Set DTR active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x01);
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- /* Setup UART FIFO: RX trigger level: 4 byte, Enable FIFO */
- out_8(ACTING_UART0_BASE + UART_FCR, (1 << 6) | 1);
-}
-
-void serial_buffered_putc (const char c)
-{
- /* Wait for CTS */
-#if defined(CONFIG_HW_WATCHDOG)
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10))
- WATCHDOG_RESET ();
-#else
- while (!(in_8((u8 *)ACTING_UART0_BASE + UART_MSR) & 0x10));
-#endif
- serial_putc (c);
-}
-
-void serial_buffered_puts (const char *s)
-{
- serial_puts (s);
-}
-
-int serial_buffered_getc (void)
-{
- int space;
- int c;
- int rx_get = buf_info.rx_get;
- int rx_put;
-
-#if defined(CONFIG_HW_WATCHDOG)
- while (rx_get == buf_info.rx_put)
- WATCHDOG_RESET ();
-#else
- while (rx_get == buf_info.rx_put);
-#endif
- c = buf_info.rx_buffer[rx_get++];
- if (rx_get == CONFIG_SERIAL_SOFTWARE_FIFO)
- rx_get = 0;
- buf_info.rx_get = rx_get;
-
- rx_put = buf_info.rx_put;
- if (rx_get <= rx_put)
- space = CONFIG_SERIAL_SOFTWARE_FIFO - (rx_put - rx_get);
- else
- space = rx_get - rx_put;
-
- if (space > CONFIG_SERIAL_SOFTWARE_FIFO / 2) {
- /* Start flow by setting RTS active */
- out_8(ACTING_UART0_BASE + UART_MCR,
- in_8((u8 *)ACTING_UART0_BASE + UART_MCR) | 0x02);
- }
-
- return c;
-}
-
-int serial_buffered_tstc (void)
-{
- return (buf_info.rx_get != buf_info.rx_put) ? 1 : 0;
-}
-
-#endif /* CONFIG_SERIAL_SOFTWARE_FIFO */
-
-#if defined(CONFIG_CMD_KGDB)
-/*
- AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
- number 0 or number 1
- - if CONFIG_KGDB_SER_INDEX = 1 => serial port number 0 :
- configuration has been already done
- - if CONFIG_KGDB_SER_INDEX = 2 => serial port number 1 :
- configure port 1 for serial I/O with rate = CONFIG_KGDB_BAUDRATE
-*/
-#if (CONFIG_KGDB_SER_INDEX & 2)
-void kgdb_serial_init (void)
-{
- u8 val;
- u16 br_reg;
-
- get_clocks ();
- br_reg = (((((gd->cpu_clk / 16) / 18) * 10) / CONFIG_KGDB_BAUDRATE) +
- 5) / 10;
- /*
- * Init onboard 16550 UART
- */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x80); /* set DLAB bit */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLL, (br_reg & 0x00ff)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_DLM, ((br_reg & 0xff00) >> 8)); /* set divisor for 9600 baud */
- out_8((u8 *)ACTING_UART1_BASE + UART_LCR, 0x03); /* line control 8 bits no parity */
- out_8((u8 *)ACTING_UART1_BASE + UART_FCR, 0x00); /* disable FIFO */
- out_8((u8 *)ACTING_UART1_BASE + UART_MCR, 0x00); /* no modem control DTR RTS */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_LSR); /* clear line status */
- val = in_8((u8 *)ACTING_UART1_BASE + UART_RBR); /* read receive buffer */
- out_8((u8 *)ACTING_UART1_BASE + UART_SCR, 0x00); /* set scratchpad */
- out_8((u8 *)ACTING_UART1_BASE + UART_IER, 0x00); /* set interrupt enable reg */
-}
-
-void putDebugChar (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- out_8((u8 *)ACTING_UART1_BASE + UART_THR, c); /* put character out */
-
- /* check THRE bit, wait for transfer done */
- while ((in_8((u8 *)ACTING_UART1_BASE + UART_LSR) & 0x20) != 0x20);
-}
-
-void putDebugStr (const char *s)
-{
- while (*s)
- serial_putc (*s++);
-}
-
-int getDebugChar (void)
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)ACTING_UART1_BASE + UART_LSR);
- if ((status & asyncLSRDataReady1) != 0x0)
- break;
-
- if ((status & (asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1 )) != 0) {
- out_8((u8 *)ACTING_UART1_BASE + UART_LSR,
- asyncLSRFramingError1 |
- asyncLSROverrunError1 |
- asyncLSRParityError1 |
- asyncLSRBreakInterrupt1);
- }
- }
-
- return (0x000000ff & (int) in_8((u8 *)ACTING_UART1_BASE));
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-
-#else /* ! (CONFIG_KGDB_SER_INDEX & 2) */
-
-void kgdb_serial_init (void)
-{
- serial_printf ("[on serial] ");
-}
-
-void putDebugChar (int c)
-{
- serial_putc (c);
-}
-
-void putDebugStr (const char *str)
-{
- serial_puts (str);
-}
-
-int getDebugChar (void)
-{
- return serial_getc ();
-}
-
-void kgdb_interruptible (int yes)
-{
- return;
-}
-#endif /* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif
-
-
-#if defined(CONFIG_SERIAL_MULTI)
-int serial0_init(void)
-{
- return (serial_init_dev(UART0_BASE));
-}
-
-int serial1_init(void)
-{
- return (serial_init_dev(UART1_BASE));
-}
-
-void serial0_setbrg (void)
-{
- serial_setbrg_dev(UART0_BASE);
-}
-
-void serial1_setbrg (void)
-{
- serial_setbrg_dev(UART1_BASE);
-}
-
-void serial0_putc(const char c)
-{
- serial_putc_dev(UART0_BASE,c);
-}
-
-void serial1_putc(const char c)
-{
- serial_putc_dev(UART1_BASE, c);
-}
-
-void serial0_puts(const char *s)
-{
- serial_puts_dev(UART0_BASE, s);
-}
-
-void serial1_puts(const char *s)
-{
- serial_puts_dev(UART1_BASE, s);
-}
-
-int serial0_getc(void)
-{
- return(serial_getc_dev(UART0_BASE));
-}
-
-int serial1_getc(void)
-{
- return(serial_getc_dev(UART1_BASE));
-}
-
-int serial0_tstc(void)
-{
- return (serial_tstc_dev(UART0_BASE));
-}
-
-int serial1_tstc(void)
-{
- return (serial_tstc_dev(UART1_BASE));
-}
-
-struct serial_device serial0_device =
-{
- "serial0",
- "UART0",
- serial0_init,
- serial0_setbrg,
- serial0_getc,
- serial0_tstc,
- serial0_putc,
- serial0_puts,
-};
-
-struct serial_device serial1_device =
-{
- "serial1",
- "UART1",
- serial1_init,
- serial1_setbrg,
- serial1_getc,
- serial1_tstc,
- serial1_putc,
- serial1_puts,
-};
-#else
-/*
- * Wrapper functions
- */
-int serial_init(void)
-{
- return serial_init_dev(ACTING_UART0_BASE);
-}
-
-void serial_setbrg(void)
-{
- serial_setbrg_dev(ACTING_UART0_BASE);
-}
-
-void serial_putc(const char c)
-{
- serial_putc_dev(ACTING_UART0_BASE, c);
-}
-
-void serial_puts(const char *s)
-{
- serial_puts_dev(ACTING_UART0_BASE, s);
-}
-
-int serial_getc(void)
-{
- return serial_getc_dev(ACTING_UART0_BASE);
-}
-
-int serial_tstc(void)
-{
- return serial_tstc_dev(ACTING_UART0_BASE);
-}
-#endif /* CONFIG_SERIAL_MULTI */
-
-#endif /* CONFIG_405GP || CONFIG_405CR */
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
deleted file mode 100644
index 88d53fb..0000000
--- a/cpu/ppc4xx/Makefile
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START := resetvec.o
-START += start.o
-
-SOBJS := cache.o
-SOBJS += dcr.o
-SOBJS += kgdb.o
-
-COBJS := 40x_spd_sdram.o
-
-COBJS += 44x_spd_ddr.o
-COBJS += 44x_spd_ddr2.o
-ifdef CONFIG_PPC4xx_DDR_AUTOCALIBRATION
-COBJS += 4xx_ibm_ddr2_autocalib.o
-endif
-COBJS += 4xx_pci.o
-COBJS += 4xx_pcie.o
-COBJS += bedbug_405.o
-ifdef CONFIG_CMD_CHIP_CONFIG
-COBJS += cmd_chip_config.o
-endif
-COBJS += commproc.o
-COBJS += cpu.o
-COBJS += cpu_init.o
-COBJS += denali_data_eye.o
-COBJS += denali_spd_ddr2.o
-COBJS += ecc.o
-COBJS += fdt.o
-COBJS += interrupts.o
-COBJS += iop480_uart.o
-ifdef CONFIG_CMD_REGINFO
-COBJS += reginfo.o
-endif
-COBJS += sdram.o
-COBJS += speed.o
-COBJS += tlb.o
-COBJS += traps.o
-COBJS += usb.o
-COBJS += usb_ohci.o
-COBJS += usbdev.o
-ifndef CONFIG_XILINX_440
-COBJS += 4xx_uart.o
-COBJS += gpio.o
-COBJS += miiphy.o
-COBJS += uic.o
-else
-COBJS += xilinx_irq.o
-endif
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
deleted file mode 100644
index ef11cb6..0000000
--- a/cpu/ppc4xx/bedbug_405.c
+++ /dev/null
@@ -1,308 +0,0 @@
-/*
- * Bedbug Functions specific to the PPC405 chip
- */
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <bedbug/type.h>
-#include <bedbug/bedbug.h>
-#include <bedbug/regs.h>
-#include <bedbug/ppc.h>
-
-#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
-
-#define MAX_BREAK_POINTS 4
-
-extern CPU_DEBUG_CTX bug_ctx;
-
-void bedbug405_init __P ((void));
-void bedbug405_do_break __P ((cmd_tbl_t *, int, int, char *[]));
-void bedbug405_break_isr __P ((struct pt_regs *));
-int bedbug405_find_empty __P ((void));
-int bedbug405_set __P ((int, unsigned long));
-int bedbug405_clear __P ((int));
-
-
-/* ======================================================================
- * Initialize the global bug_ctx structure for the AMCC PPC405. Clear all
- * of the breakpoints.
- * ====================================================================== */
-
-void bedbug405_init (void)
-{
- int i;
-
- /* -------------------------------------------------- */
-
- bug_ctx.hw_debug_enabled = 0;
- bug_ctx.stopped = 0;
- bug_ctx.current_bp = 0;
- bug_ctx.regs = NULL;
-
- bug_ctx.do_break = bedbug405_do_break;
- bug_ctx.break_isr = bedbug405_break_isr;
- bug_ctx.find_empty = bedbug405_find_empty;
- bug_ctx.set = bedbug405_set;
- bug_ctx.clear = bedbug405_clear;
-
- for (i = 1; i <= MAX_BREAK_POINTS; ++i)
- (*bug_ctx.clear) (i);
-
- puts ("BEDBUG:ready\n");
- return;
-} /* bedbug_init_breakpoints */
-
-
-
-/* ======================================================================
- * Set/clear/show one of the hardware breakpoints for the 405. The "off"
- * string will disable a specific breakpoint. The "show" string will
- * display the current breakpoints. Otherwise an address will set a
- * breakpoint at that address. Setting a breakpoint uses the CPU-specific
- * set routine which will assign a breakpoint number.
- * ====================================================================== */
-
-void bedbug405_do_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- long addr = 0; /* Address to break at */
- int which_bp; /* Breakpoint number */
-
- /* -------------------------------------------------- */
-
- if (argc < 2) {
- cmd_usage(cmdtp);
- return;
- }
-
- /* Turn off a breakpoint */
-
- if (strcmp (argv[1], "off") == 0) {
- if (bug_ctx.hw_debug_enabled == 0) {
- printf ("No breakpoints enabled\n");
- return;
- }
-
- which_bp = simple_strtoul (argv[2], NULL, 10);
-
- if (bug_ctx.clear)
- (*bug_ctx.clear) (which_bp);
-
- printf ("Breakpoint %d removed\n", which_bp);
- return;
- }
-
- /* Show a list of breakpoints */
-
- if (strcmp (argv[1], "show") == 0) {
- for (which_bp = 1; which_bp <= MAX_BREAK_POINTS; ++which_bp) {
-
- switch (which_bp) {
- case 1:
- addr = GET_IAC1 ();
- break;
- case 2:
- addr = GET_IAC2 ();
- break;
- case 3:
- addr = GET_IAC3 ();
- break;
- case 4:
- addr = GET_IAC4 ();
- break;
- }
-
- printf ("Breakpoint [%d]: ", which_bp);
- if (addr == 0)
- printf ("NOT SET\n");
- else
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts,
- F_RADHEX);
- }
- return;
- }
-
- /* Set a breakpoint at the address */
-
- if (!isdigit (argv[1][0])) {
- cmd_usage(cmdtp);
- return;
- }
-
- addr = simple_strtoul (argv[1], NULL, 16) & 0xfffffffc;
-
- if ((bug_ctx.set) && (which_bp = (*bug_ctx.set) (0, addr)) > 0) {
- printf ("Breakpoint [%d]: ", which_bp);
- disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX);
- }
-
- return;
-} /* bedbug405_do_break */
-
-
-
-/* ======================================================================
- * Handle a breakpoint. First determine which breakpoint was hit by
- * looking at the DeBug Status Register (DBSR), clear the breakpoint
- * and enter a mini main loop. Stay in the loop until the stopped flag
- * in the debug context is cleared.
- * ====================================================================== */
-
-void bedbug405_break_isr (struct pt_regs *regs)
-{
- unsigned long dbsr_val; /* Value of the DBSR */
- unsigned long addr = 0; /* Address stopped at */
-
- /* -------------------------------------------------- */
-
- dbsr_val = GET_DBSR ();
-
- if (dbsr_val & DBSR_IA1) {
- bug_ctx.current_bp = 1;
- addr = GET_IAC1 ();
- SET_DBSR (DBSR_IA1); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA2) {
- bug_ctx.current_bp = 2;
- addr = GET_IAC2 ();
- SET_DBSR (DBSR_IA2); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA3) {
- bug_ctx.current_bp = 3;
- addr = GET_IAC3 ();
- SET_DBSR (DBSR_IA3); /* Write a 1 to clear */
- } else if (dbsr_val & DBSR_IA4) {
- bug_ctx.current_bp = 4;
- addr = GET_IAC4 ();
- SET_DBSR (DBSR_IA4); /* Write a 1 to clear */
- }
-
- bedbug_main_loop (addr, regs);
- return;
-} /* bedbug405_break_isr */
-
-
-
-/* ======================================================================
- * Look through all of the hardware breakpoints available to see if one
- * is unused.
- * ====================================================================== */
-
-int bedbug405_find_empty (void)
-{
- /* -------------------------------------------------- */
-
- if (GET_IAC1 () == 0)
- return 1;
-
- if (GET_IAC2 () == 0)
- return 2;
-
- if (GET_IAC3 () == 0)
- return 3;
-
- if (GET_IAC4 () == 0)
- return 4;
-
- return 0;
-} /* bedbug405_find_empty */
-
-
-
-/* ======================================================================
- * Set a breakpoint. If 'which_bp' is zero then find an unused breakpoint
- * number, otherwise reassign the given breakpoint. If hardware debugging
- * is not enabled, then turn it on via the MSR and DBCR0. Set the break
- * address in the appropriate IACx register and enable proper address
- * beakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_set (int which_bp, unsigned long addr)
-{
- /* -------------------------------------------------- */
-
- /* Only look if which_bp == 0, else use which_bp */
- if ((bug_ctx.find_empty) && (!which_bp) &&
- (which_bp = (*bug_ctx.find_empty) ()) == 0) {
- printf ("All breakpoints in use\n");
- return 0;
- }
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # %d\n", which_bp);
- return 0;
- }
-
- if (!bug_ctx.hw_debug_enabled) {
- SET_MSR (GET_MSR () | 0x200); /* set MSR[ DE ] */
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IDM);
- bug_ctx.hw_debug_enabled = 1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (addr);
- SET_DBCR0 (GET_DBCR0 () | DBCR0_IA4);
- break;
- }
-
- return which_bp;
-} /* bedbug405_set */
-
-
-
-/* ======================================================================
- * Disable a specific breakoint by setting the appropriate IACx register
- * to zero and claring the instruction address breakpoint in DBCR0.
- * ====================================================================== */
-
-int bedbug405_clear (int which_bp)
-{
- /* -------------------------------------------------- */
-
- if (which_bp < 1 || which_bp > MAX_BREAK_POINTS) {
- printf ("Invalid break point # (%d)\n", which_bp);
- return -1;
- }
-
- switch (which_bp) {
- case 1:
- SET_IAC1 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA1);
- break;
-
- case 2:
- SET_IAC2 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA2);
- break;
-
- case 3:
- SET_IAC3 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA3);
- break;
-
- case 4:
- SET_IAC4 (0);
- SET_DBCR0 (GET_DBCR0 () & ~DBCR0_IA4);
- break;
- }
-
- return 0;
-} /* bedbug405_clear */
-
-
-/* ====================================================================== */
-#endif
diff --git a/cpu/ppc4xx/cache.S b/cpu/ppc4xx/cache.S
deleted file mode 100644
index 269716f..0000000
--- a/cpu/ppc4xx/cache.S
+++ /dev/null
@@ -1,235 +0,0 @@
-/*
- * This file contains miscellaneous low-level functions.
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <config.h>
-#include <config.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-/*
- * Flush instruction cache.
- */
-_GLOBAL(invalidate_icache)
- iccci r0,r0
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory
- * and invalidate the corresponding instruction cache blocks.
- *
- * flush_icache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_icache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- sync /* additional sync needed on g4 */
- isync
- blr
-
-/*
- * Write any modified data cache blocks out to memory.
- * Does not invalidate the corresponding cache lines (especially for
- * any corresponding instruction cache).
- *
- * clean_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(clean_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Write any modified data cache blocks out to memory and invalidate them.
- * Does not invalidate the corresponding instruction cache blocks.
- *
- * flush_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(flush_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbf 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- blr
-
-/*
- * Like above, but invalidate the D-cache. This is used by the 8xx
- * to invalidate the cache so the PPC core doesn't get stale data
- * from the CPM (no cache snooping here :-).
- *
- * invalidate_dcache_range(unsigned long start, unsigned long stop)
- */
-_GLOBAL(invalidate_dcache_range)
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
-
-1: dcbi 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbi's to get to ram */
- blr
-
-/*
- * 40x cores have 8K or 16K dcache and 32 byte line size.
- * 44x has a 32K dcache and 32 byte line size.
- * 8xx has 1, 2, 4, 8K variants.
- * For now, cover the worst case of the 44x.
- * Must be called with external interrupts disabled.
- */
-#define CACHE_NWAYS 64
-#define CACHE_NLINES 32
-
-_GLOBAL(flush_dcache)
- li r4,(2 * CACHE_NWAYS * CACHE_NLINES)
- mtctr r4
- lis r5,0
-1: lwz r3,0(r5) /* Load one word from every line */
- addi r5,r5,L1_CACHE_BYTES
- bdnz 1b
- sync
- blr
-
-_GLOBAL(invalidate_dcache)
- addi r6,0,0x0000 /* clear GPR 6 */
- /* Do loop for # of dcache congruence classes. */
- lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
- ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6,L1_CACHE_BYTES /* bump to next line */
- bdnz ..dcloop
- sync
- blr
-
-/*
- * Cache functions.
- *
- * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM,
- * although for some cache-ralated calls stubs have to be provided to satisfy
- * symbols resolution.
- * Icache-related functions are used in POST framework.
- *
- */
-#ifdef CONFIG_440
-
- .globl dcache_disable
- .globl dcache_enable
- .globl icache_disable
- .globl icache_enable
-dcache_disable:
-dcache_enable:
-icache_disable:
-icache_enable:
- blr
-
- .globl dcache_status
- .globl icache_status
-dcache_status:
-icache_status:
- mr r3, 0
- blr
-
-#else /* CONFIG_440 */
-
- .globl icache_enable
-icache_enable:
- mflr r8
- bl invalidate_icache
- mtlr r8
- isync
- addis r3,r0, 0xc000 /* set bit 0 */
- mticcr r3
- blr
-
- .globl icache_disable
-icache_disable:
- addis r3,r0, 0x0000 /* clear bit 0 */
- mticcr r3
- isync
- blr
-
- .globl icache_status
-icache_status:
- mficcr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
- .globl dcache_enable
-dcache_enable:
- mflr r8
- bl invalidate_dcache
- mtlr r8
- isync
- addis r3,r0, 0x8000 /* set bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_disable
-dcache_disable:
- mflr r8
- bl flush_dcache
- mtlr r8
- addis r3,r0, 0x0000 /* clear bit 0 */
- mtdccr r3
- blr
-
- .globl dcache_status
-dcache_status:
- mfdccr r3
- srwi r3, r3, 31 /* >>31 => select bit 0 */
- blr
-
-#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/cmd_chip_config.c b/cpu/ppc4xx/cmd_chip_config.c
deleted file mode 100644
index ba57211..0000000
--- a/cpu/ppc4xx/cmd_chip_config.c
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * (C) Copyright 2008-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2009
- * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <common.h>
-#include <command.h>
-#include <i2c.h>
-#include <asm/ppc4xx_config.h>
-#include <asm/io.h>
-
-static void print_configs(int cur_config_nr)
-{
- int i;
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- printf("%-16s - %s", ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
- if (i == cur_config_nr)
- printf(" ***");
- printf("\n");
- }
-
-}
-
-static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int i;
- int ret;
- int cur_config_nr = -1;
- u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE];
-
- /*
- * First switch to correct I2C bus. This is I2C bus 0
- * for all currently available 4xx derivats.
- */
- I2C_SET_BUS(0);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, cur_config, CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- if (ret) {
- printf("Error reading EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- /*
- * Search the current configuration
- */
- for (i = 0; i < ppc4xx_config_count; i++) {
- if (memcmp(cur_config, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE) == 0)
- cur_config_nr = i;
- }
-
- if (cur_config_nr == -1) {
- printf("Warning: The I2C bootstrap values don't match any"
- " of the available options!\n");
- printf("I2C bootstrap EEPROM values are (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- for (i = 0; i < CONFIG_4xx_CONFIG_BLOCKSIZE; i++) {
- printf("%02x ", cur_config[i]);
- }
- printf("\n");
- }
-
- if (argc < 2) {
- printf("Available configurations (I2C address 0x%02x):\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- print_configs(cur_config_nr);
- return 0;
- }
-
- for (i = 0; i < ppc4xx_config_count; i++) {
- /*
- * Search for configuration name/label
- */
- if (strcmp(argv[1], ppc4xx_config_val[i].label) == 0) {
- printf("Using configuration:\n%-16s - %s\n",
- ppc4xx_config_val[i].label,
- ppc4xx_config_val[i].description);
-
-#ifdef CONFIG_CMD_EEPROM
- ret = eeprom_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#else
- ret = i2c_write(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET,
- 1, ppc4xx_config_val[i].val,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
-#endif
- udelay(CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS * 1000);
- if (ret) {
- printf("Error updating EEPROM at addr 0x%x\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR);
- return -1;
- }
-
- printf("done (dump via 'i2c md %x 0.1 %x')\n",
- CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR,
- CONFIG_4xx_CONFIG_BLOCKSIZE);
- printf("Reset the board for the changes to"
- " take effect\n");
- return 0;
- }
- }
-
- printf("Configuration %s not found!\n", argv[1]);
- print_configs(cur_config_nr);
- return -1;
-}
-
-U_BOOT_CMD(
- chip_config, 2, 0, do_chip_config,
- "program the I2C bootstrap EEPROM",
- "[config-label]"
-);
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
deleted file mode 100644
index a1696d3..0000000
--- a/cpu/ppc4xx/commproc.c
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- *
- * Atapted for ppc4XX by Denis Peter
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/io.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if defined(CONFIG_SYS_POST_WORD_ADDR)
-# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
-#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
-# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
-#endif
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- out_be32(save_addr, a);
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr = (volatile void *)(_POST_ADDR);
-
- return in_be32(save_addr);
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-#ifdef CONFIG_BOOTCOUNT_LIMIT
-
-void bootcount_store (ulong a)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- save_addr[0] = a;
- save_addr[1] = BOOTCOUNT_MAGIC;
-}
-
-ulong bootcount_load (void)
-{
- volatile ulong *save_addr =
- (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
-
- if (save_addr[1] != BOOTCOUNT_MAGIC)
- return 0;
- else
- return save_addr[0];
-}
-
-#endif /* CONFIG_BOOTCOUNT_LIMIT */
diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk
deleted file mode 100644
index c1de1e9..0000000
--- a/cpu/ppc4xx/config.mk
+++ /dev/null
@@ -1,37 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fPIC -meabi
-PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -mstring -msoft-float
-
-cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
-is440:=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
-PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
-else
-PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
-endif
-
-# Use default linker script. Board port can override in board/*/config.mk
-LDSCRIPT := $(SRCTREE)/cpu/ppc4xx/u-boot.lds
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
deleted file mode 100644
index e1a023b..0000000
--- a/cpu/ppc4xx/cpu.c
+++ /dev/null
@@ -1,754 +0,0 @@
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- *
- * written or collected and sometimes rewritten by
- * Magnus Damm <damm@bitsmart.com>
- *
- * minor modifications by
- * Wolfgang Denk <wd@denx.de>
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void board_reset(void);
-
-/*
- * To provide an interface to detect CPU number for boards that support
- * more then one CPU, we implement the "weak" default functions here.
- *
- * Returns CPU number
- */
-int __get_cpu_num(void)
-{
- return NA_OR_UNKNOWN_CPU;
-}
-int get_cpu_num(void) __attribute__((weak, alias("__get_cpu_num")));
-
-#if defined(CONFIG_PCI)
-#if defined(CONFIG_405GP) || \
- defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-
-#define PCI_ASYNC
-
-static int pci_async_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ASYNC_EN);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_SDSTP1, val);
- return (val & SDR0_SDSTP1_PAME_MASK);
-#endif
-}
-#endif
-#endif /* CONFIG_PCI */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \
- !defined(CONFIG_405) && !defined(CONFIG_405EX)
-int pci_arbiter_enabled(void)
-{
-#if defined(CONFIG_405GP)
- return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_PCI) & CPC0_PCI_ARBIT_EN);
-#endif
-
-#if defined(CONFIG_440GP)
- return (mfdcr(CPC0_STRP1) & CPC0_STRP1_PAE_MASK);
-#endif
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || defined(CONFIG_440SPE)
- unsigned long val;
-
- mfsdr(SDR0_XCR, val);
- return (val & 0x80000000);
-#endif
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT)
- unsigned long val;
-
- mfsdr(SDR0_PCI0, val);
- return (val & 0x80000000);
-#endif
-}
-#endif
-
-#if defined(CONFIG_405EP)
-#define I2C_BOOTROM
-
-static int i2c_bootrom_enabled(void)
-{
-#if defined(CONFIG_405EP)
- return (mfdcr(CPC0_BOOT) & CPC0_BOOT_SEP);
-#else
- unsigned long val;
-
- mfsdr(SDR0_SDCS0, val);
- return (val & SDR0_SDCS_SDD);
-#endif
-}
-#endif
-
-#if defined(CONFIG_440GX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (16 bits)",
- "EBC (8 bits)",
- "EBC (32 bits)",
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "Reserved",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'B', 'D', 'E', 'x', 'F' };
-#endif
-
-#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define SDR0_PINSTP_SHIFT 30
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D'};
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "PCI",
- "NAND (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "PCI",
- "I2C (Addr 0x54)",
- "PCI",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "PCI",
- "PCI",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H' };
-#endif
-
-#if defined(CONFIG_460SX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (32 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)", /* A8 */
- "I2C (Addr 0x52)", /* A4 */
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G' };
-#endif
-
-#if defined(CONFIG_405EZ)
-#define SDR0_PINSTP_SHIFT 28
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "SPI (fast)",
- "NAND (512 page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (32 bits)",
- "I2C (Addr 0x50)",
- "NAND (2K page, 5 addr cycle)",
- "I2C (Addr 0x50)",
- "EBC (16 bits)",
- "Reserved",
- "NAND (2K page, 4 addr cycle)",
- "I2C (Addr 0x50)",
- "NAND (512 page, 3 addr cycle)",
- "I2C (Addr 0x50)",
- "SPI (slow)",
- "I2C (Addr 0x50)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'F', 'G', 'H', \
- 'I', 'x', 'K', 'L', 'M', 'N', 'O', 'P' };
-#endif
-
-#if defined(CONFIG_405EX)
-#define SDR0_PINSTP_SHIFT 29
-static char *bootstrap_str[] = {
- "EBC (8 bits)",
- "EBC (16 bits)",
- "EBC (16 bits)",
- "NAND (8 bits)",
- "NAND (8 bits)",
- "I2C (Addr 0x54)",
- "EBC (8 bits)",
- "I2C (Addr 0x52)",
-};
-static char bootstrap_char[] = { 'A', 'B', 'C', 'D', 'E', 'G', 'F', 'H' };
-#endif
-
-#if defined(SDR0_PINSTP_SHIFT)
-static int bootstrap_option(void)
-{
- unsigned long val;
-
- mfsdr(SDR0_PINSTP, val);
- return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT);
-}
-#endif /* SDR0_PINSTP_SHIFT */
-
-
-#if defined(CONFIG_440)
-static int do_chip_reset (unsigned long sys0, unsigned long sys1)
-{
- /* Changes to CPC0_SYS0 and CPC0_SYS1 require chip
- * reset.
- */
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) | 0x80000000); /* Set SWE */
- mtdcr (CPC0_SYS0, sys0);
- mtdcr (CPC0_SYS1, sys1);
- mtdcr (CPC0_CR0, mfdcr (CPC0_CR0) & ~0x80000000); /* Clr SWE */
- mtspr (SPRN_DBCR0, 0x20000000); /* Reset the chip */
-
- return 1;
-}
-#endif
-
-
-int checkcpu (void)
-{
-#if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */
- uint pvr = get_pvr();
- ulong clock = gd->cpu_clk;
- char buf[32];
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 reg;
-#endif
-
-#if !defined(CONFIG_IOP480)
- char addstr[64] = "";
- sys_info_t sys_info;
- int cpu_num;
-
- cpu_num = get_cpu_num();
- if (cpu_num >= 0)
- printf("CPU%d: ", cpu_num);
- else
- puts("CPU: ");
-
- get_sys_info(&sys_info);
-
-#if defined(CONFIG_XILINX_440)
- puts("IBM PowerPC 4");
-#else
- puts("AMCC PowerPC 4");
-#endif
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX)
- puts("05");
-#endif
-#if defined(CONFIG_440)
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- puts("60");
-#else
- puts("40");
-#endif
-#endif
-
- switch (pvr) {
- case PVR_405GP_RB:
- puts("GP Rev. B");
- break;
-
- case PVR_405GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_405GP_RD:
- puts("GP Rev. D");
- break;
-
-#ifdef CONFIG_405GP
- case PVR_405GP_RE: /* 405GP rev E and 405CR rev C have same PVR */
- puts("GP Rev. E");
- break;
-#endif
-
- case PVR_405CR_RA:
- puts("CR Rev. A");
- break;
-
- case PVR_405CR_RB:
- puts("CR Rev. B");
- break;
-
-#ifdef CONFIG_405CR
- case PVR_405CR_RC: /* 405GP rev E and 405CR rev C have same PVR */
- puts("CR Rev. C");
- break;
-#endif
-
- case PVR_405GPR_RB:
- puts("GPr Rev. B");
- break;
-
- case PVR_405EP_RB:
- puts("EP Rev. B");
- break;
-
- case PVR_405EZ_RA:
- puts("EZ Rev. A");
- break;
-
- case PVR_405EX1_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RA:
- puts("EXr Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RC:
- puts("EX Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RC:
- puts("EX Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RC:
- puts("EXr Rev. C");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EX1_RD:
- puts("EX Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EX2_RD:
- puts("EX Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_405EXR1_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_405EXR2_RD:
- puts("EXr Rev. D");
- strcpy(addstr, "No Security support");
- break;
-
-#if defined(CONFIG_440)
- case PVR_440GP_RB:
- puts("GP Rev. B");
- /* See errata 1.12: CHIP_4 */
- if ((mfdcr(CPC0_SYS0) != mfdcr(CPC0_STRP0)) ||
- (mfdcr(CPC0_SYS1) != mfdcr(CPC0_STRP1)) ){
- puts ( "\n\t CPC0_SYSx DCRs corrupted. "
- "Resetting chip ...\n");
- udelay( 1000 * 1000 ); /* Give time for serial buf to clear */
- do_chip_reset ( mfdcr(CPC0_STRP0),
- mfdcr(CPC0_STRP1) );
- }
- break;
-
- case PVR_440GP_RC:
- puts("GP Rev. C");
- break;
-
- case PVR_440GX_RA:
- puts("GX Rev. A");
- break;
-
- case PVR_440GX_RB:
- puts("GX Rev. B");
- break;
-
- case PVR_440GX_RC:
- puts("GX Rev. C");
- break;
-
- case PVR_440GX_RF:
- puts("GX Rev. F");
- break;
-
- case PVR_440EP_RA:
- puts("EP Rev. A");
- break;
-
-#ifdef CONFIG_440EP
- case PVR_440EP_RB: /* 440EP rev B and 440GR rev A have same PVR */
- puts("EP Rev. B");
- break;
-
- case PVR_440EP_RC: /* 440EP rev C and 440GR rev B have same PVR */
- puts("EP Rev. C");
- break;
-#endif /* CONFIG_440EP */
-
-#ifdef CONFIG_440GR
- case PVR_440GR_RA: /* 440EP rev B and 440GR rev A have same PVR */
- puts("GR Rev. A");
- break;
-
- case PVR_440GR_RB: /* 440EP rev C and 440GR rev B have same PVR */
- puts("GR Rev. B");
- break;
-#endif /* CONFIG_440GR */
-#endif /* CONFIG_440 */
-
-#ifdef CONFIG_440EPX
- case PVR_440EPX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440EPX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("EPx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440EPX */
-
-#ifdef CONFIG_440GRX
- case PVR_440GRX1_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_440GRX2_RA: /* 440EPx rev A and 440GRx rev A have same PVR */
- puts("GRx Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-#endif /* CONFIG_440GRX */
-
- case PVR_440SP_6_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RAB:
- puts("SP Rev. A/B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SP_6_RC:
- puts("SP Rev. C");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SP_RC:
- puts("SP Rev. C");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RA:
- puts("SPe Rev. A");
- strcpy(addstr, "No RAID 6 support");
- break;
-
- case PVR_440SPe_6_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "RAID 6 support");
- break;
-
- case PVR_440SPe_RB:
- puts("SPe Rev. B");
- strcpy(addstr, "No RAID 6 support");
- break;
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- case PVR_460EX_RA:
- puts("EX Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460EX_SE_RA:
- puts("EX Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460EX_RB:
- puts("EX Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RA:
- puts("GT Rev. A");
- strcpy(addstr, "No Security/Kasumi support");
- break;
-
- case PVR_460GT_SE_RA:
- puts("GT Rev. A");
- strcpy(addstr, "Security/Kasumi support");
- break;
-
- case PVR_460GT_RB:
- puts("GT Rev. B");
- mfsdr(SDR0_ECID3, reg);
- if (reg & 0x00100000)
- strcpy(addstr, "No Security/Kasumi support");
- else
- strcpy(addstr, "Security/Kasumi support");
- break;
-#endif
-
- case PVR_460SX_RA:
- puts("SX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460SX_RA_V1:
- puts("SX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_460GX_RA:
- puts("GX Rev. A");
- strcpy(addstr, "Security support");
- break;
-
- case PVR_460GX_RA_V1:
- puts("GX Rev. A");
- strcpy(addstr, "No Security support");
- break;
-
- case PVR_VIRTEX5:
- puts("x5 VIRTEX5");
- break;
-
- default:
- printf (" UNKNOWN (PVR=%08x)", pvr);
- break;
- }
-
- printf (" at %s MHz (PLB=%lu OPB=%lu EBC=%lu",
- strmhz(buf, clock),
- sys_info.freqPLB / 1000000,
- get_OPB_freq() / 1000000,
- sys_info.freqEBC / 1000000);
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
- printf(" PCI=%lu MHz", sys_info.freqPCI / 1000000);
-#endif
- printf(")\n");
-
- if (addstr[0] != 0)
- printf(" %s\n", addstr);
-
-#if defined(I2C_BOOTROM)
- printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis");
-#endif /* I2C_BOOTROM */
-#if defined(SDR0_PINSTP_SHIFT)
- printf (" Bootstrap Option %c - ", bootstrap_char[bootstrap_option()]);
- printf ("Boot ROM Location %s", bootstrap_str[bootstrap_option()]);
-#ifdef CONFIG_NAND_U_BOOT
- puts(", booting from NAND");
-#endif /* CONFIG_NAND_U_BOOT */
- putc('\n');
-#endif /* SDR0_PINSTP_SHIFT */
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis");
-#endif
-
-#if defined(CONFIG_PCI) && defined(PCI_ASYNC)
- if (pci_async_enabled()) {
- printf (", PCI async ext clock used");
- } else {
- printf (", PCI sync clock at %lu MHz",
- sys_info.freqPLB / sys_info.pllPciDiv / 1000000);
- }
-#endif
-
-#if defined(CONFIG_PCI) && !defined(CONFIG_405EX)
- putc('\n');
-#endif
-
-#if defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX)
- printf (" 16 kB I-Cache 16 kB D-Cache");
-#elif defined(CONFIG_440)
- printf (" 32 kB I-Cache 32 kB D-Cache");
-#else
- printf (" 16 kB I-Cache %d kB D-Cache",
- ((pvr | 0x00000001) == PVR_405GPR_RB) ? 16 : 8);
-#endif
-#endif /* !defined(CONFIG_IOP480) */
-
-#if defined(CONFIG_IOP480)
- printf ("PLX IOP480 (PVR=%08x)", pvr);
- printf (" at %s MHz:", strmhz(buf, clock));
- printf (" %u kB I-Cache", 4);
- printf (" %u kB D-Cache", 2);
-#endif
-
-#endif /* !defined(CONFIG_405) */
-
- putc ('\n');
-
- return 0;
-}
-
-int ppc440spe_revB() {
- unsigned int pvr;
-
- pvr = get_pvr();
- if ((pvr == PVR_440SPe_6_RB) || (pvr == PVR_440SPe_RB))
- return 1;
- else
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-#if defined(CONFIG_BOARD_RESET)
- board_reset();
-#else
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- mtspr(SPRN_DBCR0, CONFIG_SYS_4xx_RESET_TYPE << 28);
-#else
- /*
- * Initiate system reset in debug control register DBCR
- */
- mtspr(SPRN_DBCR0, 0x30000000);
-#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
-#endif /* defined(CONFIG_BOARD_RESET) */
-
- return 1;
-}
-
-
-/*
- * Get timebase clock frequency
- */
-unsigned long get_tbclk (void)
-{
-#if !defined(CONFIG_IOP480)
- sys_info_t sys_info;
-
- get_sys_info(&sys_info);
- return (sys_info.freqProcessor);
-#else
- return (66000000);
-#endif
-
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_4xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
-void reset_4xx_watchdog(void)
-{
- /*
- * Clear TSR(WIS) bit
- */
- mtspr(SPRN_TSR, 0x40000000);
-}
-#endif /* CONFIG_WATCHDOG */
-
-/*
- * Initializes on-chip ethernet controllers.
- * to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis)
-{
-#if defined(CONFIG_PPC4xx_EMAC)
- ppc_4xx_eth_initialize(bis);
-#endif
- return 0;
-}
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
deleted file mode 100644
index 8a6e545..0000000
--- a/cpu/ppc4xx/cpu_init.c
+++ /dev/null
@@ -1,456 +0,0 @@
-/*
- * (C) Copyright 2000-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <ppc4xx_enet.h>
-#include <asm/processor.h>
-#include <asm/gpio.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405EP)
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#ifndef CONFIG_SYS_PLL_RECONFIG
-#define CONFIG_SYS_PLL_RECONFIG 0
-#endif
-
-void reconfigure_pll(u32 new_cpu_freq)
-{
-#if defined(CONFIG_440EPX)
- int reset_needed = 0;
- u32 reg, temp;
- u32 prbdv0, target_prbdv0, /* CLK_PRIMBD */
- fwdva, target_fwdva, fwdvb, target_fwdvb, /* CLK_PLLD */
- fbdv, target_fbdv, lfbdv, target_lfbdv,
- perdv0, target_perdv0, /* CLK_PERD */
- spcid0, target_spcid0; /* CLK_SPCID */
-
- /* Reconfigure clocks if necessary.
- * See PPC440EPx User's Manual, sections 8.2 and 14 */
- if (new_cpu_freq == 667) {
- target_prbdv0 = 2;
- target_fwdva = 2;
- target_fwdvb = 4;
- target_fbdv = 20;
- target_lfbdv = 1;
- target_perdv0 = 4;
- target_spcid0 = 4;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
- if (prbdv0 != target_prbdv0) {
- reg &= ~PRBDV_MASK;
- reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24);
- mtcpr(CPR0_PRIMBD0, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PLLD, reg);
-
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdva = temp ? temp : 16;
-
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdvb = temp ? temp : 8;
-
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
-
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
-
- if (fwdva != target_fwdva || fbdv != target_fbdv || lfbdv != target_lfbdv) {
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((target_fwdva == 16 ? 0 : target_fwdva) << 16) |
- ((target_fwdvb == 8 ? 0 : target_fwdvb) << 8) |
- ((target_fbdv == 32 ? 0 : target_fbdv) << 24) |
- (target_lfbdv == 64 ? 0 : target_lfbdv);
- mtcpr(CPR0_PLLD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_PERD, reg);
- perdv0 = (reg & CPR0_PERD_PERDV0_MASK) >> 24;
- if (perdv0 != target_perdv0) {
- reg &= ~CPR0_PERD_PERDV0_MASK;
- reg |= (target_perdv0 << 24);
- mtcpr(CPR0_PERD, reg);
- reset_needed = 1;
- }
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & CPR0_SPCID_SPCIDV0_MASK) >> 24;
- spcid0 = temp ? temp : 4;
- if (spcid0 != target_spcid0) {
- reg &= ~CPR0_SPCID_SPCIDV0_MASK;
- reg |= ((target_spcid0 == 4 ? 0 : target_spcid0) << 24);
- mtcpr(CPR0_SPCID, reg);
- reset_needed = 1;
- }
- }
-
- /* Get current value of FWDVA.*/
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
-
- /*
- * Check to see if FWDVA has been set to value of 1. if it has we must
- * modify it.
- */
- if (temp == 1) {
- mfcpr(CPR0_PLLD, reg);
- /* Get current value of fbdv. */
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- fbdv = temp ? temp : 32;
- /* Get current value of lfbdv. */
- temp = (reg & PLLD_LFBDV_MASK);
- lfbdv = temp ? temp : 64;
- /*
- * Load register that contains current boot strapping option.
- */
- mfcpr(CPR0_ICFG, reg);
- /* Shift strapping option into low 3 bits.*/
- reg = (reg >> 28);
-
- if ((reg == BOOT_STRAP_OPTION_A) || (reg == BOOT_STRAP_OPTION_B) ||
- (reg == BOOT_STRAP_OPTION_D) || (reg == BOOT_STRAP_OPTION_E)) {
- /*
- * Get current value of FWDVA. Assign current FWDVA to
- * new FWDVB.
- */
- mfcpr(CPR0_PLLD, reg);
- target_fwdvb = (reg & PLLD_FWDVA_MASK) >> 16;
- fwdvb = target_fwdvb ? target_fwdvb : 8;
- /*
- * Get current value of FWDVB. Assign current FWDVB to
- * new FWDVA.
- */
- target_fwdva = (reg & PLLD_FWDVB_MASK) >> 8;
- fwdva = target_fwdva ? target_fwdva : 16;
- /*
- * Update CPR0_PLLD with switched FWDVA and FWDVB.
- */
- reg &= ~(PLLD_FWDVA_MASK | PLLD_FWDVB_MASK |
- PLLD_FBDV_MASK | PLLD_LFBDV_MASK);
- reg |= ((fwdva == 16 ? 0 : fwdva) << 16) |
- ((fwdvb == 8 ? 0 : fwdvb) << 8) |
- ((fbdv == 32 ? 0 : fbdv) << 24) |
- (lfbdv == 64 ? 0 : lfbdv);
- mtcpr(CPR0_PLLD, reg);
- /* Acknowledge that a reset is required. */
- reset_needed = 1;
- }
- }
-
- if (reset_needed) {
- /*
- * Set reload inhibit so configuration will persist across
- * processor resets
- */
- mfcpr(CPR0_ICFG, reg);
- reg &= ~CPR0_ICFG_RLI_MASK;
- reg |= 1 << 31;
- mtcpr(CPR0_ICFG, reg);
-
- /* Reset processor if configuration changed */
- __asm__ __volatile__ ("sync; isync");
- mtspr(SPRN_DBCR0, 0x20000000);
- }
-#endif
-}
-
-/*
- * Breath some life into the CPU...
- *
- * Reconfigure PLL if necessary,
- * set up the memory map,
- * initialize a bunch of registers
- */
-void
-cpu_init_f (void)
-{
-#if defined(CONFIG_WATCHDOG) || defined(CONFIG_440GX) || defined(CONFIG_460EX)
- u32 val;
-#endif
-
- reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
-
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
- /*
- * GPIO0 setup (select GPIO or alternate function)
- */
-#if defined(CONFIG_SYS_GPIO0_OR)
- out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
-#endif
-#if defined(CONFIG_SYS_GPIO0_ODR)
- out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
-#endif
- out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
- out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
- out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
- out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
- out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
-#if defined(CONFIG_SYS_GPIO0_ISR2H)
- out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
- out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
-#endif
-#if defined (CONFIG_SYS_GPIO0_TCR)
- out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
-#endif
-#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
-
-#if defined (CONFIG_405EP)
- /*
- * Set EMAC noise filter bits
- */
- mtdcr(CPC0_EPCTL, CPC0_EPRCSR_E0NFE | CPC0_EPRCSR_E1NFE);
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
- gpio_set_chip_configuration();
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
-
- /*
- * External Bus Controller (EBC) Setup
- */
-#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405))
- /*
- * Move the next instructions into icache, since these modify the flash
- * we are running from!
- */
- asm volatile(" bl 0f" ::: "lr");
- asm volatile("0: mflr 3" ::: "r3");
- asm volatile(" addi 4, 0, 14" ::: "r4");
- asm volatile(" mtctr 4" ::: "ctr");
- asm volatile("1: icbt 0, 3");
- asm volatile(" addi 3, 3, 32" ::: "r3");
- asm volatile(" bdnz 1b" ::: "ctr", "cr0");
- asm volatile(" addis 3, 0, 0x0" ::: "r3");
- asm volatile(" ori 3, 3, 0xA000" ::: "r3");
- asm volatile(" mtctr 3" ::: "ctr");
- asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
-#endif
-
- mtebc(PB0AP, CONFIG_SYS_EBC_PB0AP);
- mtebc(PB0CR, CONFIG_SYS_EBC_PB0CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
- mtebc(PB1AP, CONFIG_SYS_EBC_PB1AP);
- mtebc(PB1CR, CONFIG_SYS_EBC_PB1CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
- mtebc(PB2AP, CONFIG_SYS_EBC_PB2AP);
- mtebc(PB2CR, CONFIG_SYS_EBC_PB2CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
- mtebc(PB3AP, CONFIG_SYS_EBC_PB3AP);
- mtebc(PB3CR, CONFIG_SYS_EBC_PB3CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
- mtebc(PB4AP, CONFIG_SYS_EBC_PB4AP);
- mtebc(PB4CR, CONFIG_SYS_EBC_PB4CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
- mtebc(PB5AP, CONFIG_SYS_EBC_PB5AP);
- mtebc(PB5CR, CONFIG_SYS_EBC_PB5CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
- mtebc(PB6AP, CONFIG_SYS_EBC_PB6AP);
- mtebc(PB6CR, CONFIG_SYS_EBC_PB6CR);
-#endif
-
-#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
- mtebc(PB7AP, CONFIG_SYS_EBC_PB7AP);
- mtebc(PB7CR, CONFIG_SYS_EBC_PB7CR);
-#endif
-
-#if defined (CONFIG_SYS_EBC_CFG)
- mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
-#endif
-
-#if defined(CONFIG_WATCHDOG)
- val = mfspr(tcr);
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR)
- val |= 0xb8000000; /* generate system reset after 1.34 seconds */
-#elif defined(CONFIG_440EPX)
- val |= 0xb0000000; /* generate system reset after 1.34 seconds */
-#else
- val |= 0xf0000000; /* generate system reset after 2.684 seconds */
-#endif
-#if defined(CONFIG_SYS_4xx_RESET_TYPE)
- val &= ~0x30000000; /* clear WRC bits */
- val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
-#endif
- mtspr(tcr, val);
-
- val = mfspr(tsr);
- val |= 0x80000000; /* enable watchdog timer */
- mtspr(tsr, val);
-
- reset_4xx_watchdog();
-#endif /* CONFIG_WATCHDOG */
-
-#if defined(CONFIG_440GX)
- /* Take the GX out of compatibility mode
- * Travis Sawyer, 9 Mar 2004
- * NOTE: 440gx user manual inconsistency here
- * Compatibility mode and Ethernet Clock select are not
- * correct in the manual
- */
- mfsdr(SDR0_MFR, val);
- val &= ~0x10000000;
- mtsdr(SDR0_MFR,val);
-#endif /* CONFIG_440GX */
-
-#if defined(CONFIG_460EX)
- /*
- * Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and
- * clear SDR0_AHB_CFG[A2P_PROT2] (bit 25) for a new 460EX errata
- * regarding concurrent use of AHB USB OTG, USB 2.0 host and SATA
- */
- mfsdr(SDR0_AHB_CFG, val);
- val |= 0x80;
- val &= ~0x40;
- mtsdr(SDR0_AHB_CFG, val);
- mfsdr(SDR0_USB2HOST_CFG, val);
- val &= ~0xf00;
- val |= 0x400;
- mtsdr(SDR0_USB2HOST_CFG, val);
-#endif /* CONFIG_460EX */
-
-#if defined(CONFIG_405EX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * Set PLB4 arbiter (Segment 0 and 1) to 4 deep pipeline read
- */
- mtdcr(PLB0_ACR, (mfdcr(PLB0_ACR) & ~PLB0_ACR_RDP_MASK) |
- PLB0_ACR_RDP_4DEEP);
- mtdcr(PLB1_ACR, (mfdcr(PLB1_ACR) & ~PLB1_ACR_RDP_MASK) |
- PLB1_ACR_RDP_4DEEP);
-#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
-}
-
-/*
- * initialize higher level parts of CPU like time base and timers
- */
-int cpu_init_r (void)
-{
-#if defined(CONFIG_405GP)
- uint pvr = get_pvr();
-
- /*
- * Set edge conditioning circuitry on PPC405GPr
- * for compatibility to existing PPC405GP designs.
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- mtdcr(CPC0_ECR, 0x60606000);
- }
-#endif /* defined(CONFIG_405GP) */
-
- return 0;
-}
-
-#if defined(CONFIG_PCI) && \
- (defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \
- defined(CONFIG_440GR) || defined(CONFIG_440GRX))
-/*
- * 440EP(x)/GR(x) PCI async/sync clocking restriction:
- *
- * In asynchronous PCI mode, the synchronous PCI clock must meet
- * certain requirements. The following equation describes the
- * relationship that must be maintained between the asynchronous PCI
- * clock and synchronous PCI clock. Select an appropriate PCI:PLB
- * ratio to maintain the relationship:
- *
- * AsyncPCIClk - 1MHz <= SyncPCIclock <= (2 * AsyncPCIClk) - 1MHz
- */
-static int ppc4xx_pci_sync_clock_ok(u32 sync, u32 async)
-{
- if (((async - 1000000) > sync) || (sync > ((2 * async) - 1000000)))
- return 0;
- else
- return 1;
-}
-
-int ppc4xx_pci_sync_clock_config(u32 async)
-{
- sys_info_t sys_info;
- u32 sync;
- int div;
- u32 reg;
- u32 spcid_val[] = {
- CPR0_SPCID_SPCIDV0_DIV1, CPR0_SPCID_SPCIDV0_DIV2,
- CPR0_SPCID_SPCIDV0_DIV3, CPR0_SPCID_SPCIDV0_DIV4 };
-
- get_sys_info(&sys_info);
- sync = sys_info.freqPCI;
-
- /*
- * First check if the equation above is met
- */
- if (!ppc4xx_pci_sync_clock_ok(sync, async)) {
- /*
- * Reconfigure PCI sync clock to meet the equation.
- * Start with highest possible PCI sync frequency
- * (divider 1).
- */
- for (div = 1; div <= 4; div++) {
- sync = sys_info.freqPLB / div;
- if (ppc4xx_pci_sync_clock_ok(sync, async))
- break;
- }
-
- if (div <= 4) {
- mtcpr(CPR0_SPCID, spcid_val[div]);
-
- mfcpr(CPR0_ICFG, reg);
- reg |= CPR0_ICFG_RLI_MASK;
- mtcpr(CPR0_ICFG, reg);
-
- /* do chip reset */
- mtspr(SPRN_DBCR0, 0x20000000);
- } else {
- /* Impossible to configure the PCI sync clock */
- return -1;
- }
- }
-
- return 0;
-}
-#endif
diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S
deleted file mode 100644
index 93465a3..0000000
--- a/cpu/ppc4xx/dcr.S
+++ /dev/null
@@ -1,198 +0,0 @@
-/*
- * (C) Copyright 2001
- * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <config.h>
-
-#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
-
-#include <ppc4xx.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define _ASMLANGUAGE
-
-/*****************************************************************************
- *
- * XXX - DANGER
- * These routines make use of self modifying code. DO NOT CALL THEM
- * UNTIL THEY ARE RELOCATED TO RAM. Additionally, I do not
- * recommend them for use in anything other than an interactive
- * debugging environment. This is mainly due to performance reasons.
- *
- ****************************************************************************/
-
-/*
- * static void _create_MFDCR(unsigned short dcrn)
- *
- * Builds a 'mfdcr' instruction for get_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MFDCR,@function
-_create_MFDCR:
- /*
- * Build up a 'mfdcr' instruction formatted as follows:
- *
- * OPCD | RT | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 323 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RT = destination register - %r3 return register
- * DCRF = DCRN # with upper and lower halves swapped
- * XO = extended opcode - 323
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e30 /* RT = %r3 */
- ori r3, r3, 323 /* XO = 323 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r4
- stw r3, 0(r4) /* Store instr in get_dcr() */
- dcbst r0, r4 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r4 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe1: .size _create_MFDCR,.Lfe1-_create_MFDCR
-/* end _create_MFDCR() */
-
-/*
- * static void _create_MTDCR(unsigned short dcrn, unsigned long value)
- *
- * Builds a 'mtdcr' instruction for set_dcr
- * function.
- */
- .section ".text"
- .align 2
- .type _create_MTDCR,@function
-_create_MTDCR:
- /*
- * Build up a 'mtdcr' instruction formatted as follows:
- *
- * OPCD | RS | DCRF | XO | CR |
- * ---------------|--------------|--------------|----|
- * 0 5 | 6 10 | 11 20 | 21 30 | 31 |
- * | | DCRN | | |
- * 31 | %r3 | (5..9|0..4) | 451 | 0 |
- *
- * Where:
- * OPCD = opcode - 31
- * RS = source register - %r4
- * DCRF = dest. DCRN # with upper and lower halves swapped
- * XO = extended opcode - 451
- * CR = CR[CR0] NOT undefined - 0
- */
- rlwinm r0, r3, 27, 27, 31 /* OPCD = 31 */
- rlwinm r3, r3, 5, 22, 26
- or r3, r3, r0
- slwi r3, r3, 10
- oris r3, r3, 0x3e40 /* RS = %r4 */
- ori r3, r3, 451 /* XO = 451 */
- slwi r3, r3, 1 /* CR = 0 */
-
- mflr r5
- stw r3, 0(r5) /* Store instr in set_dcr() */
- dcbst r0, r5 /* Make sure val is written out */
- sync /* Wait for write to complete */
- icbi r0, r5 /* Make sure old instr is dumped */
- isync /* Wait for icbi to complete */
-
- blr
-.Lfe2: .size _create_MTDCR,.Lfe2-_create_MTDCR
-/* end _create_MTDCR() */
-
-
-/*
- * unsigned long get_dcr(unsigned short dcrn)
- *
- * Return a given DCR's value.
- */
- /* */
- /* XXX - This is self modifying code, hence */
- /* it is in the data section. */
- /* */
- .section ".data"
- .align 2
- .globl get_dcr
- .type get_dcr,@function
-get_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MFDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Get DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe3: .size get_dcr,.Lfe3-get_dcr
-/* end get_dcr() */
-
-
-/*
- * unsigned void set_dcr(unsigned short dcrn, unsigned long value)
- *
- * Return a given DCR's value.
- */
- /*
- * XXX - This is self modifying code, hence
- * it is in the data section.
- */
- .section ".data"
- .align 2
- .globl set_dcr
- .type set_dcr,@function
-set_dcr:
- mflr r0 /* Get link register */
- stwu r1, -32(r1) /* Save back chain and move SP */
- stw r0, +36(r1) /* Save link register */
-
- bl _create_MTDCR /* Build following instruction */
- /* XXX - we build this instuction up on the fly. */
- .long 0 /* Set DCR's value */
-
- lwz r0, +36(r1) /* Get saved link register */
- mtlr r0 /* Restore link register */
- addi r1, r1, +32 /* Remove frame from stack */
- blr /* Return to calling function */
-.Lfe4: .size set_dcr,.Lfe4-set_dcr
-/* end set_dcr() */
-#endif
diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c
deleted file mode 100644
index ffc3817..0000000
--- a/cpu/ppc4xx/denali_data_eye.c
+++ /dev/null
@@ -1,389 +0,0 @@
-/*
- * cpu/ppc4xx/denali_data_eye.c
- * Extracted from board/amcc/sequoia/sdram.c by Larry Johnson <lrj@acm.org>.
- *
- * (C) Copyright 2006
- * Sylvie Gohl, AMCC/IBM, gohl.sylvie@fr.ibm.com
- * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com
- * Thierry Roman, AMCC/IBM, thierry_roman@fr.ibm.com
- * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com
- * Robert Snyder, AMCC/IBM, rob.snyder@fr.ibm.com
- *
- * (C) Copyright 2006-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-/*-----------------------------------------------------------------------------+
- * denali_wait_for_dlllock.
- +----------------------------------------------------------------------------*/
-int denali_wait_for_dlllock(void)
-{
- u32 val;
- int wait;
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- for (wait = 0; wait != 0xffff; ++wait) {
- mfsdram(DDR0_17, val);
- if (DDR0_17_DLLLOCKREG_DECODE(val)) {
- /* dlllockreg bit on */
- return 0;
- }
- }
- debug("0x%04x: DDR0_17 Value (dlllockreg bit): 0x%08x\n", wait, val);
- debug("Waiting for dlllockreg bit to raise\n");
- return -1;
-}
-
-#if defined(CONFIG_DDR_DATA_EYE)
-#define DDR_DCR_BASE 0x10
-#define ddrcfga (DDR_DCR_BASE+0x0) /* DDR configuration address reg */
-#define ddrcfgd (DDR_DCR_BASE+0x1) /* DDR configuration data reg */
-
-/*-----------------------------------------------------------------------------+
- * wait_for_dram_init_complete.
- +----------------------------------------------------------------------------*/
-static int wait_for_dram_init_complete(void)
-{
- unsigned long val;
- int wait = 0;
-
- /* --------------------------------------------------------------+
- * Wait for 'DRAM initialization complete' bit in status register
- * -------------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_00);
-
- while (wait != 0xffff) {
- val = mfdcr(ddrcfgd);
- if ((val & DDR0_00_INT_STATUS_BIT6) == DDR0_00_INT_STATUS_BIT6)
- /* 'DRAM initialization complete' bit */
- return 0;
- else
- wait++;
- }
- debug("DRAM initialization complete bit in status register did not "
- "rise\n");
- return -1;
-}
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-/*-----------------------------------------------------------------------------+
- * denali_core_search_data_eye.
- +----------------------------------------------------------------------------*/
-void denali_core_search_data_eye(void)
-{
- int k, j;
- u32 val;
- u32 wr_dqs_shift, dqs_out_shift, dll_dqs_delay_X;
- u32 max_passing_cases = 0, wr_dqs_shift_with_max_passing_cases = 0;
- u32 passing_cases = 0, dll_dqs_delay_X_sw_val = 0;
- u32 dll_dqs_delay_X_start_window = 0, dll_dqs_delay_X_end_window = 0;
- volatile u32 *ram_pointer;
- u32 test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
- };
-
- ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
-
- for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
- /* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
-
- passing_cases = 0;
-
- for (dll_dqs_delay_X = 1; dll_dqs_delay_X < 64;
- dll_dqs_delay_X++) {
- /* for (dll_dqs_delay_X=1; dll_dqs_delay_X<128;
- dll_dqs_delay_X++) { */
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- /* clear any ECC errors */
- mtdcr(ddrcfga, DDR0_00);
- mtdcr(ddrcfgd,
- mfdcr(ddrcfgd) | DDR0_00_INT_ACK_ENCODE(0x3C));
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur!!!\n");
- printf("denali_core_search_data_eye!!!\n");
- printf("wr_dqs_shift = %d - dll_dqs_delay_X = "
- "%d\n", wr_dqs_shift, dll_dqs_delay_X);
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-
- /* write values */
- for (j = 0; j < NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer[j]));
- }
-
- /* read values back */
- for (j = 0; j < NUM_TRIES; j++) {
- for (k = 0; k < NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r"(&ram_pointer
- [j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* See if the dll_dqs_delay_X value passed. */
- mtdcr(ddrcfga, DDR0_00);
- if (j < NUM_TRIES
- || (DDR0_00_INT_STATUS_DECODE(mfdcr(ddrcfgd)) &
- 0x3F)) {
- /* Failed */
- passing_cases = 0;
- /* break; */
- } else {
- /* Passed */
- if (passing_cases == 0)
- dll_dqs_delay_X_sw_val =
- dll_dqs_delay_X;
- passing_cases++;
- if (passing_cases >= max_passing_cases) {
- max_passing_cases = passing_cases;
- wr_dqs_shift_with_max_passing_cases =
- wr_dqs_shift;
- dll_dqs_delay_X_start_window =
- dll_dqs_delay_X_sw_val;
- dll_dqs_delay_X_end_window =
- dll_dqs_delay_X;
- }
- }
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) |
- DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
- } /* for (dll_dqs_delay_X=0; dll_dqs_delay_X<128; dll_dqs_delay_X++) */
- } /* for (wr_dqs_shift=0; wr_dqs_shift<96; wr_dqs_shift++) */
-
- /* -----------------------------------------------------------+
- * Largest passing window is now detected.
- * ----------------------------------------------------------*/
-
- /* Compute dll_dqs_delay_X value */
- dll_dqs_delay_X = (dll_dqs_delay_X_end_window +
- dll_dqs_delay_X_start_window) / 2;
- wr_dqs_shift = wr_dqs_shift_with_max_passing_cases;
-
- debug("DQS calibration - Window detected:\n");
- debug("max_passing_cases = %d\n", max_passing_cases);
- debug("wr_dqs_shift = %d\n", wr_dqs_shift);
- debug("dll_dqs_delay_X = %d\n", dll_dqs_delay_X);
- debug("dll_dqs_delay_X window = %d - %d\n",
- dll_dqs_delay_X_start_window, dll_dqs_delay_X_end_window);
-
- /* -----------------------------------------------------------+
- * De-assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_OFF;
- mtdcr(ddrcfgd, val);
-
- /* -----------------------------------------------------------+
- * Set 'wr_dqs_shift'
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_09);
- val = (mfdcr(ddrcfgd) & ~DDR0_09_WR_DQS_SHIFT_MASK)
- | DDR0_09_WR_DQS_SHIFT_ENCODE(wr_dqs_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_09=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dqs_out_shift' = wr_dqs_shift + 32
- * ----------------------------------------------------------*/
- dqs_out_shift = wr_dqs_shift + 32;
- mtdcr(ddrcfga, DDR0_22);
- val = (mfdcr(ddrcfgd) & ~DDR0_22_DQS_OUT_SHIFT_MASK)
- | DDR0_22_DQS_OUT_SHIFT_ENCODE(dqs_out_shift);
- mtdcr(ddrcfgd, val);
- debug("DDR0_22=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Set 'dll_dqs_delay_X'.
- * ----------------------------------------------------------*/
- /* dll_dqs_delay_0 */
- mtdcr(ddrcfga, DDR0_17);
- val = (mfdcr(ddrcfgd) & ~DDR0_17_DLL_DQS_DELAY_0_MASK)
- | DDR0_17_DLL_DQS_DELAY_0_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_17=0x%08lx\n", val);
-
- /* dll_dqs_delay_1 to dll_dqs_delay_4 */
- mtdcr(ddrcfga, DDR0_18);
- val = (mfdcr(ddrcfgd) & ~DDR0_18_DLL_DQS_DELAY_X_MASK)
- | DDR0_18_DLL_DQS_DELAY_4_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_3_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_2_ENCODE(dll_dqs_delay_X)
- | DDR0_18_DLL_DQS_DELAY_1_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_18=0x%08lx\n", val);
-
- /* dll_dqs_delay_5 to dll_dqs_delay_8 */
- mtdcr(ddrcfga, DDR0_19);
- val = (mfdcr(ddrcfgd) & ~DDR0_19_DLL_DQS_DELAY_X_MASK)
- | DDR0_19_DLL_DQS_DELAY_8_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_7_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_6_ENCODE(dll_dqs_delay_X)
- | DDR0_19_DLL_DQS_DELAY_5_ENCODE(dll_dqs_delay_X);
- mtdcr(ddrcfgd, val);
- debug("DDR0_19=0x%08lx\n", val);
-
- /* -----------------------------------------------------------+
- * Assert 'start' parameter.
- * ----------------------------------------------------------*/
- mtdcr(ddrcfga, DDR0_02);
- val = (mfdcr(ddrcfgd) & ~DDR0_02_START_MASK) | DDR0_02_START_ON;
- mtdcr(ddrcfgd, val);
-
- sync();
- eieio();
-
- /* -----------------------------------------------------------+
- * Wait for the DCC master delay line to finish calibration
- * ----------------------------------------------------------*/
- if (denali_wait_for_dlllock() != 0) {
- printf("dll lock did not occur !!!\n");
- hang();
- }
- sync();
- eieio();
-
- if (wait_for_dram_init_complete() != 0) {
- printf("dram init complete did not occur !!!\n");
- hang();
- }
- udelay(100); /* wait 100us to ensure init is really completed !!! */
-}
-#endif /* defined(CONFIG_DDR_DATA_EYE) */
-#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
deleted file mode 100644
index 5858cb3..0000000
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ /dev/null
@@ -1,1256 +0,0 @@
-/*
- * cpu/ppc4xx/denali_spd_ddr2.c
- * This SPD SDRAM detection code supports AMCC PPC44x CPUs with a Denali-core
- * DDR2 controller, specifically the 440EPx/GRx.
- *
- * (C) Copyright 2007-2008
- * Larry Johnson, lrj@acm.org.
- *
- * Based primarily on cpu/ppc4xx/4xx_spd_ddr2.c, which is...
- *
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * COPYRIGHT AMCC CORPORATION 2004
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <i2c.h>
-#include <asm/io.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#if defined(CONFIG_SPD_EEPROM) && \
- (defined(CONFIG_440EPX) || defined(CONFIG_440GRX))
-
-/*-----------------------------------------------------------------------------+
- * Defines
- *-----------------------------------------------------------------------------*/
-#ifndef TRUE
-#define TRUE 1
-#endif
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-#define MAXDIMMS 2
-#define MAXRANKS 2
-
-#define ONE_BILLION 1000000000
-
-#define MULDIV64(m1, m2, d) (u32)(((u64)(m1) * (u64)(m2)) / (u64)(d))
-
-#define DLL_DQS_DELAY 0x19
-#define DLL_DQS_BYPASS 0x0B
-#define DQS_OUT_SHIFT 0x7F
-
-/*
- * This DDR2 setup code can dynamically setup the TLB entries for the DDR2 memory
- * region. Right now the cache should still be disabled in U-Boot because of the
- * EMAC driver, that need it's buffer descriptor to be located in non cached
- * memory.
- *
- * If at some time this restriction doesn't apply anymore, just define
- * CONFIG_4xx_DCACHE in the board config file and this code should setup
- * everything correctly.
- */
-#if defined(CONFIG_4xx_DCACHE)
-#define MY_TLB_WORD2_I_ENABLE 0 /* enable caching on SDRAM */
-#else
-#define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */
-#endif
-
-/*-----------------------------------------------------------------------------+
- * Prototypes
- *-----------------------------------------------------------------------------*/
-extern int denali_wait_for_dlllock(void);
-extern void denali_core_search_data_eye(void);
-extern void dcbz_area(u32 start_address, u32 num_bytes);
-
-/*
- * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed
- */
-void __spd_ddr_init_hang(void)
-{
- hang();
-}
-void spd_ddr_init_hang(void)
- __attribute__ ((weak, alias("__spd_ddr_init_hang")));
-
-#if defined(DEBUG)
-static void print_mcsr(void)
-{
- printf("MCSR = 0x%08X\n", mfspr(SPRN_MCSR));
-}
-
-static void denali_sdram_register_dump(void)
-{
- unsigned int sdram_data;
-
- printf("\n Register Dump:\n");
- mfsdram(DDR0_00, sdram_data);
- printf(" DDR0_00 = 0x%08X", sdram_data);
- mfsdram(DDR0_01, sdram_data);
- printf(" DDR0_01 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_02, sdram_data);
- printf(" DDR0_02 = 0x%08X", sdram_data);
- mfsdram(DDR0_03, sdram_data);
- printf(" DDR0_03 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_04, sdram_data);
- printf(" DDR0_04 = 0x%08X", sdram_data);
- mfsdram(DDR0_05, sdram_data);
- printf(" DDR0_05 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_06, sdram_data);
- printf(" DDR0_06 = 0x%08X", sdram_data);
- mfsdram(DDR0_07, sdram_data);
- printf(" DDR0_07 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_08, sdram_data);
- printf(" DDR0_08 = 0x%08X", sdram_data);
- mfsdram(DDR0_09, sdram_data);
- printf(" DDR0_09 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_10, sdram_data);
- printf(" DDR0_10 = 0x%08X", sdram_data);
- mfsdram(DDR0_11, sdram_data);
- printf(" DDR0_11 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_12, sdram_data);
- printf(" DDR0_12 = 0x%08X", sdram_data);
- mfsdram(DDR0_14, sdram_data);
- printf(" DDR0_14 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_17, sdram_data);
- printf(" DDR0_17 = 0x%08X", sdram_data);
- mfsdram(DDR0_18, sdram_data);
- printf(" DDR0_18 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_19, sdram_data);
- printf(" DDR0_19 = 0x%08X", sdram_data);
- mfsdram(DDR0_20, sdram_data);
- printf(" DDR0_20 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_21, sdram_data);
- printf(" DDR0_21 = 0x%08X", sdram_data);
- mfsdram(DDR0_22, sdram_data);
- printf(" DDR0_22 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_23, sdram_data);
- printf(" DDR0_23 = 0x%08X", sdram_data);
- mfsdram(DDR0_24, sdram_data);
- printf(" DDR0_24 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_25, sdram_data);
- printf(" DDR0_25 = 0x%08X", sdram_data);
- mfsdram(DDR0_26, sdram_data);
- printf(" DDR0_26 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_27, sdram_data);
- printf(" DDR0_27 = 0x%08X", sdram_data);
- mfsdram(DDR0_28, sdram_data);
- printf(" DDR0_28 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_31, sdram_data);
- printf(" DDR0_31 = 0x%08X", sdram_data);
- mfsdram(DDR0_32, sdram_data);
- printf(" DDR0_32 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_33, sdram_data);
- printf(" DDR0_33 = 0x%08X", sdram_data);
- mfsdram(DDR0_34, sdram_data);
- printf(" DDR0_34 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_35, sdram_data);
- printf(" DDR0_35 = 0x%08X", sdram_data);
- mfsdram(DDR0_36, sdram_data);
- printf(" DDR0_36 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_37, sdram_data);
- printf(" DDR0_37 = 0x%08X", sdram_data);
- mfsdram(DDR0_38, sdram_data);
- printf(" DDR0_38 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_39, sdram_data);
- printf(" DDR0_39 = 0x%08X", sdram_data);
- mfsdram(DDR0_40, sdram_data);
- printf(" DDR0_40 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_41, sdram_data);
- printf(" DDR0_41 = 0x%08X", sdram_data);
- mfsdram(DDR0_42, sdram_data);
- printf(" DDR0_42 = 0x%08X\n", sdram_data);
- mfsdram(DDR0_43, sdram_data);
- printf(" DDR0_43 = 0x%08X", sdram_data);
- mfsdram(DDR0_44, sdram_data);
- printf(" DDR0_44 = 0x%08X\n", sdram_data);
-}
-#else
-static inline void denali_sdram_register_dump(void)
-{
-}
-
-inline static void print_mcsr(void)
-{
-}
-#endif /* defined(DEBUG) */
-
-static int is_ecc_enabled(void)
-{
- u32 val;
-
- mfsdram(DDR0_22, val);
- return 0x3 == DDR0_22_CTRL_RAW_DECODE(val);
-}
-
-static unsigned char spd_read(u8 chip, unsigned int addr)
-{
- u8 data[2];
-
- if (0 != i2c_probe(chip) || 0 != i2c_read(chip, addr, 1, data, 1)) {
- debug("spd_read(0x%02X, 0x%02X) failed\n", chip, addr);
- return 0;
- }
- debug("spd_read(0x%02X, 0x%02X) returned 0x%02X\n",
- chip, addr, data[0]);
- return data[0];
-}
-
-static unsigned long get_tcyc(unsigned char reg)
-{
- /*
- * Byte 9, et al: Cycle time for CAS Latency=X, is split into two
- * nibbles: the higher order nibble (bits 4-7) designates the cycle time
- * to a granularity of 1ns; the value presented by the lower order
- * nibble (bits 0-3) has a granularity of .1ns and is added to the value
- * designated by the higher nibble. In addition, four lines of the lower
- * order nibble are assigned to support +.25, +.33, +.66, and +.75.
- */
-
- unsigned char subfield_b = reg & 0x0F;
-
- switch (subfield_b & 0x0F) {
- case 0x0:
- case 0x1:
- case 0x2:
- case 0x3:
- case 0x4:
- case 0x5:
- case 0x6:
- case 0x7:
- case 0x8:
- case 0x9:
- return 1000 * (reg >> 4) + 100 * subfield_b;
- case 0xA:
- return 1000 * (reg >> 4) + 250;
- case 0xB:
- return 1000 * (reg >> 4) + 333;
- case 0xC:
- return 1000 * (reg >> 4) + 667;
- case 0xD:
- return 1000 * (reg >> 4) + 750;
- }
- return 0;
-}
-
-/*------------------------------------------------------------------
- * Find the installed DIMMs, make sure that the are DDR2, and fill
- * in the dimm_ranks array. Then dimm_ranks[dimm_num] > 0 iff the
- * DIMM and dimm_num is present.
- * Note: Because there are only two chip-select lines, it is assumed
- * that a board with a single socket can support two ranks on that
- * socket, while a board with two sockets can support only one rank
- * on each socket.
- *-----------------------------------------------------------------*/
-static void get_spd_info(unsigned long dimm_ranks[],
- unsigned long *ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long dimm_found = FALSE;
- unsigned long const max_ranks_per_dimm = (1 == num_dimm_banks) ? 2 : 1;
- unsigned char num_of_bytes;
- unsigned char total_size;
-
- *ranks = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- num_of_bytes = 0;
- total_size = 0;
-
- num_of_bytes = spd_read(iic0_dimm_addr[dimm_num], 0);
- total_size = spd_read(iic0_dimm_addr[dimm_num], 1);
- if ((num_of_bytes != 0) && (total_size != 0)) {
- unsigned char const dimm_type =
- spd_read(iic0_dimm_addr[dimm_num], 2);
-
- unsigned long ranks_on_dimm =
- (spd_read(iic0_dimm_addr[dimm_num], 5) & 0x07) + 1;
-
- if (8 != dimm_type) {
- switch (dimm_type) {
- case 1:
- printf("ERROR: Standard Fast Page Mode "
- "DRAM DIMM");
- break;
- case 2:
- printf("ERROR: EDO DIMM");
- break;
- case 3:
- printf("ERROR: Pipelined Nibble DIMM");
- break;
- case 4:
- printf("ERROR: SDRAM DIMM");
- break;
- case 5:
- printf("ERROR: Multiplexed ROM DIMM");
- break;
- case 6:
- printf("ERROR: SGRAM DIMM");
- break;
- case 7:
- printf("ERROR: DDR1 DIMM");
- break;
- default:
- printf("ERROR: Unknown DIMM (type %d)",
- (unsigned int)dimm_type);
- break;
- }
- printf(" detected in slot %lu.\n", dimm_num);
- printf("Only DDR2 SDRAM DIMMs are supported."
- "\n");
- printf("Replace the module with a DDR2 DIMM."
- "\n\n");
- spd_ddr_init_hang();
- }
- dimm_found = TRUE;
- debug("DIMM slot %lu: populated with %lu-rank DDR2 DIMM"
- "\n", dimm_num, ranks_on_dimm);
- if (ranks_on_dimm > max_ranks_per_dimm) {
- printf("WARNING: DRAM DIMM in slot %lu has %lu "
- "ranks.\n", dimm_num, ranks_on_dimm);
- if (1 == max_ranks_per_dimm) {
- printf("Only one rank will be used.\n");
- } else {
- printf
- ("Only two ranks will be used.\n");
- }
- ranks_on_dimm = max_ranks_per_dimm;
- }
- dimm_ranks[dimm_num] = ranks_on_dimm;
- *ranks += ranks_on_dimm;
- } else {
- dimm_ranks[dimm_num] = 0;
- debug("DIMM slot %lu: Not populated\n", dimm_num);
- }
- }
- if (dimm_found == FALSE) {
- printf("ERROR: No memory installed.\n");
- printf("Install at least one DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- debug("Total number of ranks = %d\n", *ranks);
-}
-
-/*------------------------------------------------------------------
- * For the memory DIMMs installed, this routine verifies that
- * frequency previously calculated is supported.
- *-----------------------------------------------------------------*/
-static void check_frequency(unsigned long *dimm_ranks,
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long cycle_time;
- unsigned long calc_cycle_time;
-
- /*
- * calc_cycle_time is calculated from DDR frequency set by board/chip
- * and is expressed in picoseconds to match the way DIMM cycle time is
- * calculated below.
- */
- calc_cycle_time = MULDIV64(ONE_BILLION, 1000, sdram_freq);
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- cycle_time =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num], 9));
- debug("cycle_time=%d ps\n", cycle_time);
-
- if (cycle_time > (calc_cycle_time + 10)) {
- /*
- * the provided sdram cycle_time is too small
- * for the available DIMM cycle_time. The
- * additionnal 10ps is here to accept a small
- * incertainty.
- */
- printf
- ("ERROR: DRAM DIMM detected with cycle_time %d ps in "
- "slot %d \n while calculated cycle time is %d ps.\n",
- (unsigned int)cycle_time,
- (unsigned int)dimm_num,
- (unsigned int)calc_cycle_time);
- printf
- ("Replace the DIMM, or change DDR frequency via "
- "strapping bits.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-/*------------------------------------------------------------------
- * This routine gets size information for the installed memory
- * DIMMs.
- *-----------------------------------------------------------------*/
-static void get_dimm_size(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long *const rows,
- unsigned long *const banks,
- unsigned long *const cols, unsigned long *const width)
-{
- unsigned long dimm_num;
-
- *rows = 0;
- *banks = 0;
- *cols = 0;
- *width = 0;
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- unsigned long t;
-
- /* Rows */
- t = spd_read(iic0_dimm_addr[dimm_num], 3);
- if (0 == *rows) {
- *rows = t;
- } else if (t != *rows) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of rows.\n\n");
- spd_ddr_init_hang();
- }
- /* Banks */
- t = spd_read(iic0_dimm_addr[dimm_num], 17);
- if (0 == *banks) {
- *banks = t;
- } else if (t != *banks) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of banks.\n\n");
- spd_ddr_init_hang();
- }
- /* Columns */
- t = spd_read(iic0_dimm_addr[dimm_num], 4);
- if (0 == *cols) {
- *cols = t;
- } else if (t != *cols) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same number of columns.\n\n");
- spd_ddr_init_hang();
- }
- /* Data width */
- t = spd_read(iic0_dimm_addr[dimm_num], 6);
- if (0 == *width) {
- *width = t;
- } else if (t != *width) {
- printf("ERROR: DRAM DIMM modules do not all "
- "have the same data width.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
- debug("Number of rows = %d\n", *rows);
- debug("Number of columns = %d\n", *cols);
- debug("Number of banks = %d\n", *banks);
- debug("Data width = %d\n", *width);
- if (*rows > 14) {
- printf("ERROR: DRAM DIMM modules have %lu address rows.\n",
- *rows);
- printf("Only modules with 14 or fewer rows are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (4 != *banks && 8 != *banks) {
- printf("ERROR: DRAM DIMM modules have %lu banks.\n", *banks);
- printf("Only modules with 4 or 8 banks are supported.\n\n");
- spd_ddr_init_hang();
- }
- if (*cols > 12) {
- printf("ERROR: DRAM DIMM modules have %lu address columns.\n",
- *cols);
- printf("Only modules with 12 or fewer columns are "
- "supported.\n\n");
- spd_ddr_init_hang();
- }
- if (32 != *width && 40 != *width && 64 != *width && 72 != *width) {
- printf("ERROR: DRAM DIMM modules have a width of %lu bit.\n",
- *width);
- printf("Only modules with widths of 32, 40, 64, and 72 bits "
- "are supported.\n\n");
- spd_ddr_init_hang();
- }
-}
-
-/*------------------------------------------------------------------
- * Only 1.8V modules are supported. This routine verifies this.
- *-----------------------------------------------------------------*/
-static void check_voltage_type(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks)
-{
- unsigned long dimm_num;
- unsigned long voltage_type;
-
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- if (dimm_ranks[dimm_num]) {
- voltage_type = spd_read(iic0_dimm_addr[dimm_num], 8);
- if (0x05 != voltage_type) { /* 1.8V for DDR2 */
- printf("ERROR: Slot %lu provides 1.8V for DDR2 "
- "DIMMs.\n", dimm_num);
- switch (voltage_type) {
- case 0x00:
- printf("This DIMM is 5.0 Volt/TTL.\n");
- break;
- case 0x01:
- printf("This DIMM is LVTTL.\n");
- break;
- case 0x02:
- printf("This DIMM is 1.5 Volt.\n");
- break;
- case 0x03:
- printf("This DIMM is 3.3 Volt/TTL.\n");
- break;
- case 0x04:
- printf("This DIMM is 2.5 Volt.\n");
- break;
- default:
- printf("This DIMM is an unknown "
- "voltage.\n");
- break;
- }
- printf("Replace it with a 1.8V DDR2 DIMM.\n\n");
- spd_ddr_init_hang();
- }
- }
- }
-}
-
-static void program_ddr0_03(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long rows, unsigned long *cas_latency)
-{
- unsigned long dimm_num;
- unsigned long cas_index;
- unsigned long cycle_2_0_clk;
- unsigned long cycle_3_0_clk;
- unsigned long cycle_4_0_clk;
- unsigned long cycle_5_0_clk;
- unsigned long max_2_0_tcyc_ps = 100;
- unsigned long max_3_0_tcyc_ps = 100;
- unsigned long max_4_0_tcyc_ps = 100;
- unsigned long max_5_0_tcyc_ps = 100;
- unsigned char cas_available = 0x3C; /* value for DDR2 */
- u32 ddr0_03 = DDR0_03_BSTLEN_ENCODE(0x2) | DDR0_03_INITAREF_ENCODE(0x2);
- unsigned int const tcyc_addr[3] = { 9, 23, 25 };
-
- /*------------------------------------------------------------------
- * Get the board configuration info.
- *-----------------------------------------------------------------*/
- debug("sdram_freq = %d\n", sdram_freq);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned char const cas_bit =
- spd_read(iic0_dimm_addr[dimm_num], 18);
- unsigned char cas_mask;
-
- cas_available &= cas_bit;
- for (cas_mask = 0x80; cas_mask; cas_mask >>= 1) {
- if (cas_bit & cas_mask)
- break;
- }
- debug("cas_bit (SPD byte 18) = %02X, cas_mask = %02X\n",
- cas_bit, cas_mask);
-
- for (cas_index = 0; cas_index < 3;
- cas_mask >>= 1, cas_index++) {
- unsigned long cycle_time_ps;
-
- if (!(cas_available & cas_mask)) {
- continue;
- }
- cycle_time_ps =
- get_tcyc(spd_read(iic0_dimm_addr[dimm_num],
- tcyc_addr[cas_index]));
-
- debug("cas_index = %d: cycle_time_ps = %d\n",
- cas_index, cycle_time_ps);
- /*
- * DDR2 devices use the following bitmask for CAS latency:
- * Bit 7 6 5 4 3 2 1 0
- * TBD 6.0 5.0 4.0 3.0 2.0 TBD TBD
- */
- switch (cas_mask) {
- case 0x20:
- max_5_0_tcyc_ps =
- max(max_5_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x10:
- max_4_0_tcyc_ps =
- max(max_4_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x08:
- max_3_0_tcyc_ps =
- max(max_3_0_tcyc_ps, cycle_time_ps);
- break;
- case 0x04:
- max_2_0_tcyc_ps =
- max(max_2_0_tcyc_ps, cycle_time_ps);
- break;
- }
- }
- }
- }
- debug("cas_available (bit map) = 0x%02X\n", cas_available);
-
- /*------------------------------------------------------------------
- * Set the SDRAM mode, SDRAM_MMODE
- *-----------------------------------------------------------------*/
-
- /* add 10 here because of rounding problems */
- cycle_2_0_clk = MULDIV64(ONE_BILLION, 1000, max_2_0_tcyc_ps) + 10;
- cycle_3_0_clk = MULDIV64(ONE_BILLION, 1000, max_3_0_tcyc_ps) + 10;
- cycle_4_0_clk = MULDIV64(ONE_BILLION, 1000, max_4_0_tcyc_ps) + 10;
- cycle_5_0_clk = MULDIV64(ONE_BILLION, 1000, max_5_0_tcyc_ps) + 10;
- debug("cycle_2_0_clk = %d\n", cycle_2_0_clk);
- debug("cycle_3_0_clk = %d\n", cycle_3_0_clk);
- debug("cycle_4_0_clk = %d\n", cycle_4_0_clk);
- debug("cycle_5_0_clk = %d\n", cycle_5_0_clk);
-
- if ((cas_available & 0x04) && (sdram_freq <= cycle_2_0_clk)) {
- *cas_latency = 2;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x2) |
- DDR0_03_CASLAT_LIN_ENCODE(0x4);
- } else if ((cas_available & 0x08) && (sdram_freq <= cycle_3_0_clk)) {
- *cas_latency = 3;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x3) |
- DDR0_03_CASLAT_LIN_ENCODE(0x6);
- } else if ((cas_available & 0x10) && (sdram_freq <= cycle_4_0_clk)) {
- *cas_latency = 4;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x4) |
- DDR0_03_CASLAT_LIN_ENCODE(0x8);
- } else if ((cas_available & 0x20) && (sdram_freq <= cycle_5_0_clk)) {
- *cas_latency = 5;
- ddr0_03 |= DDR0_03_CASLAT_ENCODE(0x5) |
- DDR0_03_CASLAT_LIN_ENCODE(0xA);
- } else {
- printf("ERROR: Cannot find a supported CAS latency with the "
- "installed DIMMs.\n");
- printf("Only DDR2 DIMMs with CAS latencies of 2.0, 3.0, 4.0, "
- "and 5.0 are supported.\n");
- printf("Make sure the PLB speed is within the supported range "
- "of the DIMMs.\n");
- printf("sdram_freq=%ld cycle2=%ld cycle3=%ld cycle4=%ld "
- "cycle5=%ld\n\n", sdram_freq, cycle_2_0_clk,
- cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk);
- spd_ddr_init_hang();
- }
- debug("CAS latency = %d\n", *cas_latency);
- mtsdram(DDR0_03, ddr0_03);
-}
-
-static void program_ddr0_04(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rc_ps = 0;
- unsigned long t_rrd_ps = 0;
- unsigned long t_rtp_ps = 0;
- unsigned long t_rc_clk;
- unsigned long t_rrd_clk;
- unsigned long t_rtp_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 41);
- switch (spd_read(iic0_dimm_addr[dimm_num], 40) >> 4) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rc_ps = max(t_rc_ps, ps);
- /* tRRD */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 28);
- t_rrd_ps = max(t_rrd_ps, ps);
- /* tRTP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 38);
- t_rtp_ps = max(t_rtp_ps, ps);
- }
- }
- debug("t_rc_ps = %d\n", t_rc_ps);
- t_rc_clk = (MULDIV64(sdram_freq, t_rc_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rrd_ps = %d\n", t_rrd_ps);
- t_rrd_clk = (MULDIV64(sdram_freq, t_rrd_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rtp_ps = %d\n", t_rtp_ps);
- t_rtp_clk = (MULDIV64(sdram_freq, t_rtp_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_04, DDR0_04_TRC_ENCODE(t_rc_clk) |
- DDR0_04_TRRD_ENCODE(t_rrd_clk) |
- DDR0_04_TRTP_ENCODE(t_rtp_clk));
-}
-
-static void program_ddr0_05(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rp_ps = 0;
- unsigned long t_ras_ps = 0;
- unsigned long t_rp_clk;
- unsigned long t_ras_clk;
- u32 ddr0_05 = DDR0_05_TMRD_ENCODE(0x2) | DDR0_05_TEMRS_ENCODE(0x2);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tRP */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 27);
- t_rp_ps = max(t_rp_ps, ps);
- /* tRAS */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 30);
- t_ras_ps = max(t_ras_ps, ps);
- }
- }
- debug("t_rp_ps = %d\n", t_rp_ps);
- t_rp_clk = (MULDIV64(sdram_freq, t_rp_ps, ONE_BILLION) + 999) / 1000;
- debug("t_ras_ps = %d\n", t_ras_ps);
- t_ras_clk = (MULDIV64(sdram_freq, t_ras_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_05, ddr0_05 | DDR0_05_TRP_ENCODE(t_rp_clk) |
- DDR0_05_TRAS_MIN_ENCODE(t_ras_clk));
-}
-
-static void program_ddr0_06(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned char spd_40;
- unsigned long t_wtr_ps = 0;
- unsigned long t_rfc_ps = 0;
- unsigned long t_wtr_clk;
- unsigned long t_rfc_clk;
- u32 ddr0_06 =
- DDR0_06_WRITEINTERP_ENCODE(0x1) | DDR0_06_TDLL_ENCODE(200);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- /* tWTR */
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 37);
- t_wtr_ps = max(t_wtr_ps, ps);
- /* tRFC */
- ps = 1000 * spd_read(iic0_dimm_addr[dimm_num], 42);
- spd_40 = spd_read(iic0_dimm_addr[dimm_num], 40);
- ps += 256000 * (spd_40 & 0x01);
- switch ((spd_40 & 0x0E) >> 1) {
- case 0x1:
- ps += 250;
- break;
- case 0x2:
- ps += 333;
- break;
- case 0x3:
- ps += 500;
- break;
- case 0x4:
- ps += 667;
- break;
- case 0x5:
- ps += 750;
- break;
- }
- t_rfc_ps = max(t_rfc_ps, ps);
- }
- }
- debug("t_wtr_ps = %d\n", t_wtr_ps);
- t_wtr_clk = (MULDIV64(sdram_freq, t_wtr_ps, ONE_BILLION) + 999) / 1000;
- debug("t_rfc_ps = %d\n", t_rfc_ps);
- t_rfc_clk = (MULDIV64(sdram_freq, t_rfc_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_06, ddr0_06 | DDR0_06_TWTR_ENCODE(t_wtr_clk) |
- DDR0_06_TRFC_ENCODE(t_rfc_clk));
-}
-
-static void program_ddr0_10(unsigned long dimm_ranks[], unsigned long ranks)
-{
- unsigned long csmap;
-
- if (2 == ranks) {
- /* Both chip selects in use */
- csmap = 0x03;
- } else {
- /* One chip select in use */
- csmap = (1 == dimm_ranks[0]) ? 0x1 : 0x2;
- }
- mtsdram(DDR0_10, DDR0_10_WRITE_MODEREG_ENCODE(0x0) |
- DDR0_10_CS_MAP_ENCODE(csmap) |
- DDR0_10_OCD_ADJUST_PUP_CS_0_ENCODE(0));
-}
-
-static void program_ddr0_11(unsigned long sdram_freq)
-{
- unsigned long const t_xsnr_ps = 200000; /* 200 ns */
- unsigned long t_xsnr_clk;
-
- debug("t_xsnr_ps = %d\n", t_xsnr_ps);
- t_xsnr_clk =
- (MULDIV64(sdram_freq, t_xsnr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_11, DDR0_11_SREFRESH_ENCODE(0) |
- DDR0_11_TXSNR_ENCODE(t_xsnr_clk) | DDR0_11_TXSR_ENCODE(200));
-}
-
-static void program_ddr0_22(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks, unsigned long width)
-{
-#if defined(CONFIG_DDR_ECC)
- unsigned long dimm_num;
- unsigned long ecc_available = width >= 64;
- u32 ddr0_22 = DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS);
-
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- /* Check for ECC */
- if (0 == (spd_read(iic0_dimm_addr[dimm_num], 11) &
- 0x02)) {
- ecc_available = FALSE;
- }
- }
- }
- if (ecc_available) {
- debug("ECC found on all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x3));
- } else {
- debug("ECC not found on some or all DIMMs present\n");
- mtsdram(DDR0_22, ddr0_22 | DDR0_22_CTRL_RAW_ENCODE(0x0));
- }
-#else
- mtsdram(DDR0_22, DDR0_22_CTRL_RAW_ENCODE(0x0) |
- DDR0_22_DQS_OUT_SHIFT_BYPASS_ENCODE(0x26) |
- DDR0_22_DQS_OUT_SHIFT_ENCODE(DQS_OUT_SHIFT) |
- DDR0_22_DLL_DQS_BYPASS_8_ENCODE(DLL_DQS_BYPASS));
-#endif /* defined(CONFIG_DDR_ECC) */
-}
-
-static void program_ddr0_24(unsigned long ranks)
-{
- u32 ddr0_24 = DDR0_24_RTT_PAD_TERMINATION_ENCODE(0x1) | /* 75 ohm */
- DDR0_24_ODT_RD_MAP_CS1_ENCODE(0x0);
-
- if (2 == ranks) {
- /* Both chip selects in use */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x1) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x2);
- } else {
- /* One chip select in use */
- /* One of the two fields added to ddr0_24 is a "don't care" */
- ddr0_24 |= DDR0_24_ODT_WR_MAP_CS1_ENCODE(0x2) |
- DDR0_24_ODT_WR_MAP_CS0_ENCODE(0x1);
- }
- mtsdram(DDR0_24, ddr0_24);
-}
-
-static void program_ddr0_26(unsigned long sdram_freq)
-{
- unsigned long const t_ref_ps = 7800000; /* 7.8 us. refresh */
- /* TODO: check definition of tRAS_MAX */
- unsigned long const t_ras_max_ps = 9 * t_ref_ps;
- unsigned long t_ras_max_clk;
- unsigned long t_ref_clk;
-
- /* Round down t_ras_max_clk and t_ref_clk */
- debug("t_ras_max_ps = %d\n", t_ras_max_ps);
- t_ras_max_clk = MULDIV64(sdram_freq, t_ras_max_ps, ONE_BILLION) / 1000;
- debug("t_ref_ps = %d\n", t_ref_ps);
- t_ref_clk = MULDIV64(sdram_freq, t_ref_ps, ONE_BILLION) / 1000;
- mtsdram(DDR0_26, DDR0_26_TRAS_MAX_ENCODE(t_ras_max_clk) |
- DDR0_26_TREF_ENCODE(t_ref_clk));
-}
-
-static void program_ddr0_27(unsigned long sdram_freq)
-{
- unsigned long const t_init_ps = 200000000; /* 200 us. init */
- unsigned long t_init_clk;
-
- debug("t_init_ps = %d\n", t_init_ps);
- t_init_clk =
- (MULDIV64(sdram_freq, t_init_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_27, DDR0_27_EMRS_DATA_ENCODE(0x0000) |
- DDR0_27_TINIT_ENCODE(t_init_clk));
-}
-
-static void program_ddr0_43(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq,
- unsigned long cols, unsigned long banks)
-{
- unsigned long dimm_num;
- unsigned long t_wr_ps = 0;
- unsigned long t_wr_clk;
- u32 ddr0_43 = DDR0_43_APREBIT_ENCODE(10) |
- DDR0_43_COLUMN_SIZE_ENCODE(12 - cols) |
- DDR0_43_EIGHT_BANK_MODE_ENCODE(8 == banks ? 1 : 0);
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 36);
- t_wr_ps = max(t_wr_ps, ps);
- }
- }
- debug("t_wr_ps = %d\n", t_wr_ps);
- t_wr_clk = (MULDIV64(sdram_freq, t_wr_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_43, ddr0_43 | DDR0_43_TWR_ENCODE(t_wr_clk));
-}
-
-static void program_ddr0_44(unsigned long dimm_ranks[],
- unsigned char const iic0_dimm_addr[],
- unsigned long num_dimm_banks,
- unsigned long sdram_freq)
-{
- unsigned long dimm_num;
- unsigned long t_rcd_ps = 0;
- unsigned long t_rcd_clk;
-
- /*------------------------------------------------------------------
- * Handle the timing. We need to find the worst case timing of all
- * the dimm modules installed.
- *-----------------------------------------------------------------*/
- /* loop through all the DIMM slots on the board */
- for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
- /* If a dimm is installed in a particular slot ... */
- if (dimm_ranks[dimm_num]) {
- unsigned long ps;
-
- ps = 250 * spd_read(iic0_dimm_addr[dimm_num], 29);
- t_rcd_ps = max(t_rcd_ps, ps);
- }
- }
- debug("t_rcd_ps = %d\n", t_rcd_ps);
- t_rcd_clk = (MULDIV64(sdram_freq, t_rcd_ps, ONE_BILLION) + 999) / 1000;
- mtsdram(DDR0_44, DDR0_44_TRCD_ENCODE(t_rcd_clk));
-}
-
-/*-----------------------------------------------------------------------------+
- * initdram. Initializes the 440EPx/GPx DDR SDRAM controller.
- * Note: This routine runs from flash with a stack set up in the chip's
- * sram space. It is important that the routine does not require .sbss, .bss or
- * .data sections. It also cannot call routines that require these sections.
- *-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------
- * Function: initdram
- * Description: Configures SDRAM memory banks for DDR operation.
- * Auto Memory Configuration option reads the DDR SDRAM EEPROMs
- * via the IIC bus and then configures the DDR SDRAM memory
- * banks appropriately. If Auto Memory Configuration is
- * not used, it is assumed that no DIMM is plugged
- *-----------------------------------------------------------------------------*/
-phys_size_t initdram(int board_type)
-{
- unsigned char const iic0_dimm_addr[] = SPD_EEPROM_ADDRESS;
- unsigned long dimm_ranks[MAXDIMMS];
- unsigned long ranks;
- unsigned long rows;
- unsigned long banks;
- unsigned long cols;
- unsigned long width;
- unsigned long const sdram_freq = get_bus_freq(0);
- unsigned long const num_dimm_banks = sizeof(iic0_dimm_addr); /* on board dimm banks */
- unsigned long cas_latency = 0; /* to quiet initialization warning */
- unsigned long dram_size;
-
- debug("\nEntering initdram()\n");
-
- /*------------------------------------------------------------------
- * Stop the DDR-SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(0));
-
- /*
- * Make sure I2C controller is initialized
- * before continuing.
- */
- /* switch to correct I2C bus */
- I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
- /*------------------------------------------------------------------
- * Clear out the serial presence detect buffers.
- * Perform IIC reads from the dimm. Fill in the spds.
- * Check to see if the dimm slots are populated
- *-----------------------------------------------------------------*/
- get_spd_info(dimm_ranks, &ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Check the frequency supported for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_frequency(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*------------------------------------------------------------------
- * Check and get size information.
- *-----------------------------------------------------------------*/
- get_dimm_size(dimm_ranks, iic0_dimm_addr, num_dimm_banks, &rows, &banks,
- &cols, &width);
-
- /*------------------------------------------------------------------
- * Check the voltage type for the dimms plugged.
- *-----------------------------------------------------------------*/
- check_voltage_type(dimm_ranks, iic0_dimm_addr, num_dimm_banks);
-
- /*------------------------------------------------------------------
- * Program registers for SDRAM controller.
- *-----------------------------------------------------------------*/
- mtsdram(DDR0_00, DDR0_00_DLL_INCREMENT_ENCODE(0x19) |
- DDR0_00_DLL_START_POINT_DECODE(0x0A));
-
- mtsdram(DDR0_01, DDR0_01_PLB0_DB_CS_LOWER_ENCODE(0x01) |
- DDR0_01_PLB0_DB_CS_UPPER_ENCODE(0x00) |
- DDR0_01_INT_MASK_ENCODE(0xFF));
-
- program_ddr0_03(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- rows, &cas_latency);
-
- program_ddr0_04(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_05(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- program_ddr0_06(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- /*
- * TODO: tFAW not found in SPD. Value of 13 taken from Sequoia
- * board SDRAM, but may be overly conservative.
- */
- mtsdram(DDR0_07, DDR0_07_NO_CMD_INIT_ENCODE(0) |
- DDR0_07_TFAW_ENCODE(13) |
- DDR0_07_AUTO_REFRESH_MODE_ENCODE(1) |
- DDR0_07_AREFRESH_ENCODE(0));
-
- mtsdram(DDR0_08, DDR0_08_WRLAT_ENCODE(cas_latency - 1) |
- DDR0_08_TCPD_ENCODE(200) | DDR0_08_DQS_N_EN_ENCODE(0) |
- DDR0_08_DDRII_ENCODE(1));
-
- mtsdram(DDR0_09, DDR0_09_OCD_ADJUST_PDN_CS_0_ENCODE(0x00) |
- DDR0_09_RTT_0_ENCODE(0x1) |
- DDR0_09_WR_DQS_SHIFT_BYPASS_ENCODE(0x1D) |
- DDR0_09_WR_DQS_SHIFT_ENCODE(DQS_OUT_SHIFT - 0x20));
-
- program_ddr0_10(dimm_ranks, ranks);
-
- program_ddr0_11(sdram_freq);
-
- mtsdram(DDR0_12, DDR0_12_TCKE_ENCODE(3));
-
- mtsdram(DDR0_14, DDR0_14_DLL_BYPASS_MODE_ENCODE(0) |
- DDR0_14_REDUC_ENCODE(width <= 40 ? 1 : 0) |
- DDR0_14_REG_DIMM_ENABLE_ENCODE(0));
-
- mtsdram(DDR0_17, DDR0_17_DLL_DQS_DELAY_0_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_18, DDR0_18_DLL_DQS_DELAY_4_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_3_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_2_ENCODE(DLL_DQS_DELAY) |
- DDR0_18_DLL_DQS_DELAY_1_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_19, DDR0_19_DLL_DQS_DELAY_8_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_7_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_6_ENCODE(DLL_DQS_DELAY) |
- DDR0_19_DLL_DQS_DELAY_5_ENCODE(DLL_DQS_DELAY));
-
- mtsdram(DDR0_20, DDR0_20_DLL_DQS_BYPASS_3_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_2_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_1_ENCODE(DLL_DQS_BYPASS) |
- DDR0_20_DLL_DQS_BYPASS_0_ENCODE(DLL_DQS_BYPASS));
-
- mtsdram(DDR0_21, DDR0_21_DLL_DQS_BYPASS_7_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_6_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_5_ENCODE(DLL_DQS_BYPASS) |
- DDR0_21_DLL_DQS_BYPASS_4_ENCODE(DLL_DQS_BYPASS));
-
- program_ddr0_22(dimm_ranks, iic0_dimm_addr, num_dimm_banks, width);
-
- mtsdram(DDR0_23, DDR0_23_ODT_RD_MAP_CS0_ENCODE(0x0) |
- DDR0_23_FWC_ENCODE(0));
-
- program_ddr0_24(ranks);
-
- program_ddr0_26(sdram_freq);
-
- program_ddr0_27(sdram_freq);
-
- mtsdram(DDR0_28, DDR0_28_EMRS3_DATA_ENCODE(0x0000) |
- DDR0_28_EMRS2_DATA_ENCODE(0x0000));
-
- mtsdram(DDR0_31, DDR0_31_XOR_CHECK_BITS_ENCODE(0x0000));
-
- mtsdram(DDR0_42, DDR0_42_ADDR_PINS_ENCODE(14 - rows) |
- DDR0_42_CASLAT_LIN_GATE_ENCODE(2 * cas_latency));
-
- program_ddr0_43(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq,
- cols, banks);
-
- program_ddr0_44(dimm_ranks, iic0_dimm_addr, num_dimm_banks, sdram_freq);
-
- denali_sdram_register_dump();
-
- dram_size = (width >= 64) ? 8 : 4;
- dram_size *= 1 << cols;
- dram_size *= banks;
- dram_size *= 1 << rows;
- dram_size *= ranks;
- debug("dram_size = %lu\n", dram_size);
-
- /* Start the SDRAM controler */
- mtsdram(DDR0_02, DDR0_02_START_ENCODE(1));
- denali_wait_for_dlllock();
-
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Map the first 1 MiB of memory in the TLB, and perform the data eye
- * search.
- */
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
- denali_core_search_data_eye();
- denali_sdram_register_dump();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
-#endif
-
-#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
- sync();
- /* Zero the memory */
- debug("Zeroing SDRAM...");
-#if defined(CONFIG_SYS_MEM_TOP_HIDE)
- dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
-#else
-#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
-#endif
- /* Write modified dcache lines back to memory */
- clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
- debug("Completed\n");
- sync();
- remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
-
-#if defined(CONFIG_DDR_ECC)
- /*
- * If ECC is enabled, clear and enable interrupts
- */
- if (is_ecc_enabled()) {
- u32 val;
-
- sync();
- /* Clear error status */
- mfsdram(DDR0_00, val);
- mtsdram(DDR0_00, val | DDR0_00_INT_ACK_ALL);
- /* Set 'int_mask' parameter to functionnal value */
- mfsdram(DDR0_01, val);
- mtsdram(DDR0_01, (val & ~DDR0_01_INT_MASK_MASK) |
- DDR0_01_INT_MASK_ALL_OFF);
-#if defined(CONFIG_DDR_DATA_EYE)
- /*
- * Running denali_core_search_data_eye() when ECC is enabled
- * causes non-ECC machine checks. This clears them.
- */
- print_mcsr();
- mtspr(SPRN_MCSR, mfspr(SPRN_MCSR));
- print_mcsr();
-#endif
- sync();
- }
-#endif /* defined(CONFIG_DDR_ECC) */
-#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
-
- program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
- return dram_size;
-}
-
-void board_add_ram_info(int use_default)
-{
- u32 val;
-
- printf(" (ECC");
- if (!is_ecc_enabled()) {
- printf(" not");
- }
- printf(" enabled, %ld MHz", (2 * get_bus_freq(0)) / 1000000);
-
- mfsdram(DDR0_03, val);
- printf(", CL%d)", DDR0_03_CASLAT_LIN_DECODE(val) >> 1);
-}
-#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c
deleted file mode 100644
index f105605..0000000
--- a/cpu/ppc4xx/ecc.c
+++ /dev/null
@@ -1,185 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * (C) Copyright 2005-2009
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2002
- * Jun Gu, Artesyn Technology, jung@artesyncp.com
- *
- * (C) Copyright 2001
- * Bill Hunter, Wave 7 Optics, williamhunter@attbi.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements generic DRAM ECC initialization for
- * PowerPC processors using a SDRAM DDR/DDR2 controller,
- * including the 405EX(r), 440GP/GX/EP/GR, 440SP(E), and
- * 460EX/GT.
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-#include <asm/cache.h>
-
-#include "ecc.h"
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR) || \
- defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-#if defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC)
-
-#if defined(CONFIG_405EX)
-/*
- * Currently only 405EX uses 16bit data bus width as an alternative
- * option to 32bit data width (SDRAM0_MCOPT1_WDTH)
- */
-#define SDRAM_DATA_ALT_WIDTH 2
-#else
-#define SDRAM_DATA_ALT_WIDTH 8
-#endif
-
-static void wait_ddr_idle(void)
-{
- u32 val;
-
- do {
- mfsdram(SDRAM_MCSTAT, val);
- } while ((val & SDRAM_MCSTAT_IDLE_MASK) == SDRAM_MCSTAT_IDLE_NOT);
-}
-
-static void program_ecc_addr(unsigned long start_address,
- unsigned long num_bytes,
- unsigned long tlb_word2_i_value)
-{
- unsigned long current_address;
- unsigned long end_address;
- unsigned long address_increment;
- unsigned long mcopt1;
- char str[] = "ECC generation -";
- char slash[] = "\\|/-\\|/-";
- int loop = 0;
- int loopi = 0;
-
- current_address = start_address;
- mfsdram(SDRAM_MCOPT1, mcopt1);
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_GEN);
- sync();
- eieio();
- wait_ddr_idle();
-
- puts(str);
-
-#ifdef CONFIG_440
- if (tlb_word2_i_value == TLB_WORD2_I_ENABLE) {
-#endif
- /* ECC bit set method for non-cached memory */
- if ((mcopt1 & SDRAM_MCOPT1_DMWD_MASK) == SDRAM_MCOPT1_DMWD_32)
- address_increment = 4;
- else
- address_increment = SDRAM_DATA_ALT_WIDTH;
- end_address = current_address + num_bytes;
-
- while (current_address < end_address) {
- *((unsigned long *)current_address) = 0;
- current_address += address_increment;
-
- if ((loop++ % (2 << 20)) == 0) {
- putc('\b');
- putc(slash[loopi++ % 8]);
- }
- }
-#ifdef CONFIG_440
- } else {
- /* ECC bit set method for cached memory */
- dcbz_area(start_address, num_bytes);
- /* Write modified dcache lines back to memory */
- clean_dcache_range(start_address, start_address + num_bytes);
- }
-#endif /* CONFIG_440 */
-
- blank_string(strlen(str));
-
- sync();
- eieio();
- wait_ddr_idle();
-
- /* clear ECC error repoting registers */
- mtsdram(SDRAM_ECCES, 0xffffffff);
- mtdcr(0x4c, 0xffffffff);
-
- mtsdram(SDRAM_MCOPT1,
- (mcopt1 & ~SDRAM_MCOPT1_MCHK_MASK) | SDRAM_MCOPT1_MCHK_CHK_REP);
- sync();
- eieio();
- wait_ddr_idle();
- }
-}
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-void ecc_init(unsigned long * const start, unsigned long size)
-{
- /*
- * Init ECC with cache disabled (on PPC's with IBM DDR
- * controller (non DDR2), not tested with cache enabled yet
- */
- program_ecc_addr((u32)start, size, TLB_WORD2_I_ENABLE);
-}
-#endif
-
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR2)
-void do_program_ecc(unsigned long tlb_word2_i_value)
-{
- unsigned long mcopt1;
- unsigned long mcopt2;
- unsigned long mcstat;
- phys_size_t memsize = sdram_memsize();
-
- if (memsize > CONFIG_MAX_MEM_MAPPED) {
- printf("\nWarning: Can't enable ECC on systems with more than 2GB of SDRAM!\n");
- return;
- }
-
- mfsdram(SDRAM_MCOPT1, mcopt1);
- mfsdram(SDRAM_MCOPT2, mcopt2);
-
- if ((mcopt1 & SDRAM_MCOPT1_MCHK_MASK) != SDRAM_MCOPT1_MCHK_NON) {
- /* DDR controller must be enabled and not in self-refresh. */
- mfsdram(SDRAM_MCSTAT, mcstat);
- if (((mcopt2 & SDRAM_MCOPT2_DCEN_MASK) == SDRAM_MCOPT2_DCEN_ENABLE)
- && ((mcopt2 & SDRAM_MCOPT2_SREN_MASK) == SDRAM_MCOPT2_SREN_EXIT)
- && ((mcstat & (SDRAM_MCSTAT_MIC_MASK | SDRAM_MCSTAT_SRMS_MASK))
- == (SDRAM_MCSTAT_MIC_COMP | SDRAM_MCSTAT_SRMS_NOT_SF))) {
-
- program_ecc_addr(0, memsize, tlb_word2_i_value);
- }
- }
-}
-#endif
-
-#endif /* defined(CONFIG_DDR_ECC) || defined(CONFIG_SDRAM_ECC) */
-#endif /* defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)... */
diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h
deleted file mode 100644
index b258891..0000000
--- a/cpu/ppc4xx/ecc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * Copyright (c) 2007-2009 DENX Software Engineering, GmbH
- * Stefan Roese <sr@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will abe useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:
- * This file implements ECC initialization for PowerPC processors
- * using the IBM SDRAM DDR1 & DDR2 controller.
- *
- */
-
-#ifndef _ECC_H_
-#define _ECC_H_
-
-/*
- * Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
- * compatible to the IBM DDR/2 controller used on 405EX/440SP/SPe/460EX/GT
- * we need to make some processor dependant defines used later on by the
- * driver.
- */
-
-/* For 440GP/GX/EP/GR */
-#if defined(CONFIG_SDRAM_PPC4xx_IBM_DDR)
-#define SDRAM_MCOPT1 SDRAM_CFG0
-#define SDRAM_MCOPT1_MCHK_MASK SDRAM_CFG0_MCHK_MASK
-#define SDRAM_MCOPT1_MCHK_NON SDRAM_CFG0_MCHK_NON
-#define SDRAM_MCOPT1_MCHK_GEN SDRAM_CFG0_MCHK_GEN
-#define SDRAM_MCOPT1_MCHK_CHK SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_MCHK_CHK_REP SDRAM_CFG0_MCHK_CHK
-#define SDRAM_MCOPT1_DMWD_MASK SDRAM_CFG0_DMWD_MASK
-#define SDRAM_MCOPT1_DMWD_32 SDRAM_CFG0_DMWD_32
-
-#define SDRAM_MCSTAT SDRAM0_MCSTS
-#define SDRAM_MCSTAT_IDLE_MASK SDRAM_MCSTS_CIS
-#define SDRAM_MCSTAT_IDLE_NOT SDRAM_MCSTS_IDLE_NOT
-
-#define SDRAM_ECCES SDRAM0_ECCESR
-#endif
-
-void ecc_init(unsigned long * const start, unsigned long size);
-void do_program_ecc(unsigned long tlb_word2_i_value);
-
-static void inline blank_string(int size)
-{
- int i;
-
- for (i = 0; i < size; i++)
- putc('\b');
- for (i = 0; i < size; i++)
- putc(' ');
- for (i = 0; i < size; i++)
- putc('\b');
-}
-
-#endif /* _ECC_H_ */
diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c
deleted file mode 100644
index 15a184b..0000000
--- a/cpu/ppc4xx/fdt.c
+++ /dev/null
@@ -1,177 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/cache.h>
-#include <ppc4xx.h>
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-#include <libfdt.h>
-#include <libfdt_env.h>
-#include <fdt_support.h>
-#include <asm/4xx_pcie.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void __ft_board_setup(void *blob, bd_t *bd)
-{
- int rc;
- int i;
- u32 bxcr;
- u32 ranges[EBC_NUM_BANKS * 4];
- u32 *p = ranges;
- char ebc_path[] = "/plb/opb/ebc";
-
- ft_cpu_setup(blob, bd);
-
- /*
- * Read 4xx EBC bus bridge registers to get mappings of the
- * peripheral banks into the OPB/PLB address space
- */
- for (i = 0; i < EBC_NUM_BANKS; i++) {
- mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
- bxcr = mfdcr(EBC0_CFGDATA);
-
- if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
- *p++ = i;
- *p++ = 0;
- *p++ = bxcr & EBC_BXCR_BAS_MASK;
- *p++ = EBC_BXCR_BANK_SIZE(bxcr);
-
-#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
- /* Try to update reg property in nor flash node too */
- fdt_fixup_nor_flash_size(blob, i,
- EBC_BXCR_BANK_SIZE(bxcr));
-#endif
- }
- }
-
- /* Some 405 PPC's have EBC as direct PLB child in the dts */
- if (fdt_path_offset(blob, ebc_path) < 0)
- strcpy(ebc_path, "/plb/ebc");
- rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
- (p - ranges) * sizeof(u32), 1);
- if (rc) {
- printf("Unable to update property EBC mappings, err=%s\n",
- fdt_strerror(rc));
- }
-}
-void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
-
-/*
- * Fixup all PCIe nodes by setting the device_type property
- * to "pci-endpoint" instead is "pci" for endpoint ports.
- * This property will get checked later by the Linux driver
- * to properly configure the PCIe port in Linux (again).
- */
-void fdt_pcie_setup(void *blob)
-{
- const char *compat = "ibm,plb-pciex";
- const char *prop = "device_type";
- const char *prop_val = "pci-endpoint";
- const u32 *port;
- int no;
- int rc;
-
- /* Search first PCIe node */
- no = fdt_node_offset_by_compatible(blob, -1, compat);
- while (no != -FDT_ERR_NOTFOUND) {
- port = fdt_getprop(blob, no, "port", NULL);
- if (port == NULL) {
- printf("WARNING: could not find port property\n");
- } else {
- if (is_end_point(*port)) {
- rc = fdt_setprop(blob, no, prop, prop_val,
- strlen(prop_val) + 1);
- if (rc < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop, compat, fdt_strerror(rc));
- }
- }
-
- /* Jump to next PCIe node */
- no = fdt_node_offset_by_compatible(blob, no, compat);
- }
-}
-
-void ft_cpu_setup(void *blob, bd_t *bd)
-{
- sys_info_t sys_info;
- int off, ndepth = 0;
-
- get_sys_info(&sys_info);
-
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
- bd->bi_intfreq, 1);
- do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
- do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
-
- if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
- do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
- else
- do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
- sys_info.freqEBC, 1);
-
- fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
-
- /*
- * Fixup all UART clocks for CPU internal UARTs
- * (only these UARTs are definitely clocked by gd->uart_clk)
- *
- * These UARTs are direct childs of /plb/opb. This code
- * does not touch any UARTs that are connected to the ebc.
- */
- off = fdt_path_offset(blob, "/plb/opb");
- while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
- /*
- * process all sub nodes and stop when we are back
- * at the starting depth
- */
- if (ndepth <= 0)
- break;
-
- /* only update direct childs */
- if ((ndepth == 1) &&
- (fdt_node_check_compatible(blob, off, "ns16550") == 0))
- fdt_setprop(blob, off,
- "clock-frequency",
- (void*)&(gd->uart_clk), 4);
- }
-
- /*
- * Fixup all ethernet nodes
- * Note: aliases in the dts are required for this
- */
- fdt_fixup_ethernet(blob);
-
- /*
- * Fixup all available PCIe nodes by setting the device_type property
- */
- fdt_pcie_setup(blob);
-}
-#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
deleted file mode 100644
index c0d351a..0000000
--- a/cpu/ppc4xx/gpio.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2007-2008
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
-#endif
-
-#if defined(GPIO0_OSRL)
-/* Only some 4xx variants support alternate funtions on the GPIO's */
-void gpio_config(int pin, int in_out, int gpio_alt, int out_val)
-{
- u32 mask;
- u32 mask2;
- u32 val;
- u32 offs = 0;
- u32 offs2 = 0;
- int pin2 = pin << 1;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (pin >= GPIO_MAX/2) {
- offs2 = 0x4;
- pin2 = (pin - GPIO_MAX/2) << 1;
- }
-
- mask = 0x80000000 >> pin;
- mask2 = 0xc0000000 >> pin2;
-
- /* first set TCR to 0 */
- out_be32((void *)GPIO0_TCR + offs, in_be32((void *)GPIO0_TCR + offs) & ~mask);
-
- if (in_out == GPIO_OUT) {
- val = in_be32((void *)GPIO0_OSRL + offs + offs2) & ~mask2;
- switch (gpio_alt) {
- case GPIO_ALT1:
- val |= GPIO_ALT1_SEL >> pin2;
- break;
- case GPIO_ALT2:
- val |= GPIO_ALT2_SEL >> pin2;
- break;
- case GPIO_ALT3:
- val |= GPIO_ALT3_SEL >> pin2;
- break;
- }
- out_be32((void *)GPIO0_OSRL + offs + offs2, val);
-
- /* setup requested output value */
- if (out_val == GPIO_OUT_0)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~mask);
- else if (out_val == GPIO_OUT_1)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | mask);
-
- /* now configure TCR to drive output if selected */
- out_be32((void *)GPIO0_TCR + offs,
- in_be32((void *)GPIO0_TCR + offs) | mask);
- } else {
- val = in_be32((void *)GPIO0_ISR1L + offs + offs2) & ~mask2;
- val |= GPIO_IN_SEL >> pin2;
- out_be32((void *)GPIO0_ISR1L + offs + offs2, val);
- }
-}
-#endif /* GPIO_OSRL */
-
-void gpio_write_bit(int pin, int val)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- if (val)
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) | GPIO_VAL(pin));
- else
- out_be32((void *)GPIO0_OR + offs,
- in_be32((void *)GPIO0_OR + offs) & ~GPIO_VAL(pin));
-}
-
-int gpio_read_out_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-int gpio_read_in_bit(int pin)
-{
- u32 offs = 0;
-
- if (pin >= GPIO_MAX) {
- offs = 0x100;
- pin -= GPIO_MAX;
- }
-
- return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
-}
-
-#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
-void gpio_set_chip_configuration(void)
-{
- unsigned char i=0, j=0, offs=0, gpio_core;
- unsigned long reg, core_add;
-
- for (gpio_core=0; gpio_core<GPIO_GROUP_MAX; gpio_core++) {
- j = 0;
- offs = 0;
- /* GPIO config of the GPIOs 0 to 31 */
- for (i=0; i<GPIO_MAX; i++, j++) {
- if (i == GPIO_MAX/2) {
- offs = 4;
- j = i-16;
- }
-
- core_add = gpio_tab[gpio_core][i].add;
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_IN) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- break;
-
- case GPIO_ALT1:
- reg = in_be32((void *)GPIO_IS1(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS1(core_add+offs), reg);
- break;
-
- case GPIO_ALT2:
- reg = in_be32((void *)GPIO_IS2(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS2(core_add+offs), reg);
- break;
-
- case GPIO_ALT3:
- reg = in_be32((void *)GPIO_IS3(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (GPIO_IN_SEL >> (j*2));
- out_be32((void *)GPIO_IS3(core_add+offs), reg);
- break;
- }
- }
-
- if ((gpio_tab[gpio_core][i].in_out == GPIO_OUT) ||
- (gpio_tab[gpio_core][i].in_out == GPIO_BI)) {
-
- u32 gpio_alt_sel = 0;
-
- switch (gpio_tab[gpio_core][i].alt_nb) {
- case GPIO_SEL:
- /*
- * Setup output value
- * 1 -> high level
- * 0 -> low level
- * else -> don't touch
- */
- reg = in_be32((void *)GPIO_OR(core_add));
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
- reg |= (0x80000000 >> (i));
- else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
- reg &= ~(0x80000000 >> (i));
- out_be32((void *)GPIO_OR(core_add), reg);
-
- reg = in_be32((void *)GPIO_TCR(core_add)) |
- (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
-
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- break;
-
- case GPIO_ALT1:
- gpio_alt_sel = GPIO_ALT1_SEL;
- break;
-
- case GPIO_ALT2:
- gpio_alt_sel = GPIO_ALT2_SEL;
- break;
-
- case GPIO_ALT3:
- gpio_alt_sel = GPIO_ALT3_SEL;
- break;
- }
-
- if (0 != gpio_alt_sel) {
- reg = in_be32((void *)GPIO_OS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_OS(core_add+offs), reg);
-
- if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) {
- reg = in_be32((void *)GPIO_TCR(core_add))
- | (0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- } else {
- reg = in_be32((void *)GPIO_TCR(core_add))
- & ~(0x80000000 >> (i));
- out_be32((void *)GPIO_TCR(core_add), reg);
- reg = in_be32((void *)GPIO_TS(core_add+offs))
- & ~(GPIO_MASK >> (j*2));
- reg = reg | (gpio_alt_sel >> (j*2));
- out_be32((void *)GPIO_TS(core_add+offs), reg);
- }
- }
- }
- }
- }
-}
-#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
deleted file mode 100644
index 6db8421..0000000
--- a/cpu/ppc4xx/interrupts.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * CPM interrupt vector functions.
- */
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-static struct irq_action irq_vecs[IRQ_MAX];
-
-#if defined(CONFIG_440)
-
-/* SPRN changed in 440 */
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtspr 0x03f,%0" : : "r" (val));
-}
-
-#else /* !defined(CONFIG_440) */
-
-static __inline__ void set_pit(unsigned long val)
-{
- asm volatile("mtpit %0" : : "r" (val));
-}
-
-
-static __inline__ void set_tcr(unsigned long val)
-{
- asm volatile("mttcr %0" : : "r" (val));
-}
-
-
-static __inline__ void set_evpr(unsigned long val)
-{
- asm volatile("mtevpr %0" : : "r" (val));
-}
-#endif /* defined(CONFIG_440 */
-
-int interrupt_init_cpu (unsigned *decrementer_count)
-{
- int vec;
- unsigned long val;
-
- /* decrementer is automatically reloaded */
- *decrementer_count = 0;
-
- /*
- * Mark all irqs as free
- */
- for (vec = 0; vec < IRQ_MAX; vec++) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
-#ifdef CONFIG_4xx
- /*
- * Init PIT
- */
-#if defined(CONFIG_440)
- val = mfspr( SPRN_TCR );
- val &= (~0x04400000); /* clear DIS & ARE */
- mtspr( SPRN_TCR, val );
- mtspr( SPRN_DEC, 0 ); /* Prevent exception after TSR clear*/
- mtspr( SPRN_DECAR, 0 ); /* clear reload */
- mtspr( SPRN_TSR, 0x08000000 ); /* clear DEC status */
- val = gd->bd->bi_intfreq/1000; /* 1 msec */
- mtspr( SPRN_DECAR, val ); /* Set auto-reload value */
- mtspr( SPRN_DEC, val ); /* Set inital val */
-#else
- set_pit(gd->bd->bi_intfreq / 1000);
-#endif
-#endif /* CONFIG_4xx */
-
-#ifdef CONFIG_ADCIOP
- /*
- * Init PIT
- */
- set_pit(66000);
-#endif
-
- /*
- * Enable PIT
- */
- val = mfspr(SPRN_TCR);
- val |= 0x04400000;
- mtspr(SPRN_TCR, val);
-
- /*
- * Set EVPR to 0
- */
- set_evpr(0x00000000);
-
- /*
- * Call uic or xilinx_irq pic_enable
- */
- pic_enable();
-
- return (0);
-}
-
-void timer_interrupt_cpu(struct pt_regs *regs)
-{
- /* nothing to do here */
- return;
-}
-
-void interrupt_run_handler(int vec)
-{
- irq_vecs[vec].count++;
-
- if (irq_vecs[vec].handler != NULL) {
- /* call isr */
- (*irq_vecs[vec].handler) (irq_vecs[vec].arg);
- } else {
- pic_irq_disable(vec);
- printf("Masking bogus interrupt vector %d\n", vec);
- }
-
- pic_irq_ack(vec);
- return;
-}
-
-void irq_install_handler(int vec, interrupt_handler_t * handler, void *arg)
-{
- /*
- * Print warning when replacing with a different irq vector
- */
- if ((irq_vecs[vec].handler != NULL) && (irq_vecs[vec].handler != handler)) {
- printf("Interrupt vector %d: handler 0x%x replacing 0x%x\n",
- vec, (uint) handler, (uint) irq_vecs[vec].handler);
- }
- irq_vecs[vec].handler = handler;
- irq_vecs[vec].arg = arg;
-
- pic_irq_enable(vec);
- return;
-}
-
-void irq_free_handler(int vec)
-{
- debug("Free interrupt for vector %d ==> %p\n",
- vec, irq_vecs[vec].handler);
-
- pic_irq_disable(vec);
-
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- return;
-}
-
-#if defined(CONFIG_CMD_IRQ)
-int do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("Interrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec = 0; vec < IRQ_MAX; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
-
- return 0;
-}
-#endif
diff --git a/cpu/ppc4xx/iop480_uart.c b/cpu/ppc4xx/iop480_uart.c
deleted file mode 100644
index 0e3423f..0000000
--- a/cpu/ppc4xx/iop480_uart.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2000-2006
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <commproc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <watchdog.h>
-
-#ifdef CONFIG_SERIAL_MULTI
-#include <serial.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_IOP480
-
-#define SPU_BASE 0x40000000
-
-#define spu_LineStat_rc 0x00 /* Line Status Register (Read/Clear) */
-#define spu_LineStat_w 0x04 /* Line Status Register (Set) */
-#define spu_Handshk_rc 0x08 /* Handshake Status Register (Read/Clear) */
-#define spu_Handshk_w 0x0c /* Handshake Status Register (Set) */
-#define spu_BRateDivh 0x10 /* Baud rate divisor high */
-#define spu_BRateDivl 0x14 /* Baud rate divisor low */
-#define spu_CtlReg 0x18 /* Control Register */
-#define spu_RxCmd 0x1c /* Rx Command Register */
-#define spu_TxCmd 0x20 /* Tx Command Register */
-#define spu_RxBuff 0x24 /* Rx data buffer */
-#define spu_TxBuff 0x24 /* Tx data buffer */
-
-/*-----------------------------------------------------------------------------+
- | Line Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncLSRport1 0x40000000
-#define asyncLSRport1set 0x40000004
-#define asyncLSRDataReady 0x80
-#define asyncLSRFramingError 0x40
-#define asyncLSROverrunError 0x20
-#define asyncLSRParityError 0x10
-#define asyncLSRBreakInterrupt 0x08
-#define asyncLSRTxHoldEmpty 0x04
-#define asyncLSRTxShiftEmpty 0x02
-
-/*-----------------------------------------------------------------------------+
- | Handshake Status Register.
- +-----------------------------------------------------------------------------*/
-#define asyncHSRport1 0x40000008
-#define asyncHSRport1set 0x4000000c
-#define asyncHSRDsr 0x80
-#define asyncLSRCts 0x40
-
-/*-----------------------------------------------------------------------------+
- | Control Register.
- +-----------------------------------------------------------------------------*/
-#define asyncCRport1 0x40000018
-#define asyncCRNormal 0x00
-#define asyncCRLoopback 0x40
-#define asyncCRAutoEcho 0x80
-#define asyncCRDtr 0x20
-#define asyncCRRts 0x10
-#define asyncCRWordLength7 0x00
-#define asyncCRWordLength8 0x08
-#define asyncCRParityDisable 0x00
-#define asyncCRParityEnable 0x04
-#define asyncCREvenParity 0x00
-#define asyncCROddParity 0x02
-#define asyncCRStopBitsOne 0x00
-#define asyncCRStopBitsTwo 0x01
-#define asyncCRDisableDtrRts 0x00
-
-/*-----------------------------------------------------------------------------+
- | Receiver Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncRCRport1 0x4000001c
-#define asyncRCRDisable 0x00
-#define asyncRCREnable 0x80
-#define asyncRCRIntDisable 0x00
-#define asyncRCRIntEnabled 0x20
-#define asyncRCRDMACh2 0x40
-#define asyncRCRDMACh3 0x60
-#define asyncRCRErrorInt 0x10
-#define asyncRCRPauseEnable 0x08
-
-/*-----------------------------------------------------------------------------+
- | Transmitter Command Register.
- +-----------------------------------------------------------------------------*/
-#define asyncTCRport1 0x40000020
-#define asyncTCRDisable 0x00
-#define asyncTCREnable 0x80
-#define asyncTCRIntDisable 0x00
-#define asyncTCRIntEnabled 0x20
-#define asyncTCRDMACh2 0x40
-#define asyncTCRDMACh3 0x60
-#define asyncTCRTxEmpty 0x10
-#define asyncTCRErrorInt 0x08
-#define asyncTCRStopPause 0x04
-#define asyncTCRBreakGen 0x02
-
-/*-----------------------------------------------------------------------------+
- | Miscellanies defines.
- +-----------------------------------------------------------------------------*/
-#define asyncTxBufferport1 0x40000024
-#define asyncRxBufferport1 0x40000024
-#define asyncDLABLsbport1 0x40000014
-#define asyncDLABMsbport1 0x40000010
-#define asyncXOFFchar 0x13
-#define asyncXONchar 0x11
-
-/*
- * Minimal serial functions needed to use one of the SMC ports
- * as serial console interface.
- */
-
-int serial_init (void)
-{
- volatile char val;
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- /*
- * Init onboard UART
- */
- out_8((u8 *)SPU_BASE + spu_LineStat_rc, 0x78); /* Clear all bits in Line Status Reg */
- out_8((u8 *)SPU_BASE + spu_BRateDivl, (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh, ((br_reg & 0xff00) >> 8)); /* ... */
- out_8((u8 *)SPU_BASE + spu_CtlReg, 0x08); /* Set 8 bits, no parity and 1 stop bit */
- out_8((u8 *)SPU_BASE + spu_RxCmd, 0xb0); /* Enable Rx */
- out_8((u8 *)SPU_BASE + spu_TxCmd, 0x9c); /* Enable Tx */
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- val = in_8((u8 *)SPU_BASE + spu_RxBuff); /* Dummy read, to clear receiver */
-
- return (0);
-}
-
-void serial_setbrg (void)
-{
- unsigned short br_reg;
-
- br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1);
-
- out_8((u8 *)SPU_BASE + spu_BRateDivl,
- (br_reg & 0x00ff)); /* Set baud rate divisor... */
- out_8((u8 *)SPU_BASE + spu_BRateDivh,
- ((br_reg & 0xff00) >> 8)); /* ... */
-}
-
-void serial_putc (const char c)
-{
- if (c == '\n')
- serial_putc ('\r');
-
- /* load status from handshake register */
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
-
- out_8((u8 *)SPU_BASE + spu_TxBuff, c); /* Put char */
-
- while ((in_8((u8 *)SPU_BASE + spu_LineStat_rc) & 04) != 04) {
- if (in_8((u8 *)SPU_BASE + spu_Handshk_rc) != 00)
- out_8((u8 *)SPU_BASE + spu_Handshk_rc, 0xff); /* Clear Handshake */
- }
-}
-
-void serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-int serial_getc ()
-{
- unsigned char status = 0;
-
- while (1) {
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- break;
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt );
- }
- }
- return (0x000000ff & (int) in_8((u8 *)asyncRxBufferport1));
-}
-
-int serial_tstc ()
-{
- unsigned char status;
-
- status = in_8((u8 *)asyncLSRport1);
- if ((status & asyncLSRDataReady) != 0x0) {
- return (1);
- }
- if ((status & ( asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt )) != 0) {
- (void) out_8((u8 *)asyncLSRport1,
- asyncLSRFramingError |
- asyncLSROverrunError |
- asyncLSRParityError |
- asyncLSRBreakInterrupt);
- }
- return 0;
-}
-
-#endif /* CONFIG_IOP480 */
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
deleted file mode 100644
index 4227a4c..0000000
--- a/cpu/ppc4xx/kgdb.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * Copyright (C) 2000 Murray Jensen <Murray.Jensen@cmst.csiro.au>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <command.h>
-#include <ppc4xx.h>
-#include <version.h>
-
-#define CONFIG_405GP 1 /* needed for Linux kernel header files */
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#if defined(CONFIG_CMD_KGDB)
- /*
- * cache flushing routines for kgdb
- */
-
- .globl kgdb_flush_cache_all
-kgdb_flush_cache_all:
- /* icache */
- iccci r0,r0 /* iccci invalidates the entire I cache */
- /* dcache */
- addi r6,0,0x0000 /* clear GPR 6 */
- addi r7,r0, 128 /* do loop for # of dcache lines */
- /* NOTE: dccci invalidates both */
- mtctr r7 /* ways in the D cache */
-..dcloop:
- dccci 0,r6 /* invalidate line */
- addi r6,r6, 32 /* bump to next line */
- bdnz ..dcloop
- blr
-
- .globl kgdb_flush_cache_range
-kgdb_flush_cache_range:
- li r5,L1_CACHE_BYTES-1
- andc r3,r3,r5
- subf r4,r3,r4
- add r4,r4,r5
- srwi. r4,r4,L1_CACHE_SHIFT
- beqlr
- mtctr r4
- mr r6,r3
-1: dcbst 0,r3
- addi r3,r3,L1_CACHE_BYTES
- bdnz 1b
- sync /* wait for dcbst's to get to ram */
- mtctr r4
-2: icbi 0,r6
- addi r6,r6,L1_CACHE_BYTES
- bdnz 2b
- SYNC
- blr
-
-#endif
diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c
deleted file mode 100644
index 22ed5c2..0000000
--- a/cpu/ppc4xx/miiphy.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*-----------------------------------------------------------------------------+
- | This source code is dual-licensed. You may use it under the terms of the
- | GNU General Public License version 2, or under the license below.
- |
- | This source code has been made available to you by IBM on an AS-IS
- | basis. Anyone receiving this source is licensed under IBM
- | copyrights to use it in any way he or she deems fit, including
- | copying it, modifying it, compiling it, and redistributing it either
- | with or without modifications. No license under IBM patents or
- | patent applications is to be implied by the copyright license.
- |
- | Any user of this software should understand that IBM cannot provide
- | technical support for this software and will not be responsible for
- | any consequences resulting from the use of this software.
- |
- | Any person who transfers this source code or any derivative work
- | must include the IBM copyright notice, this paragraph, and the
- | preceding two paragraphs in the transferred software.
- |
- | COPYRIGHT I B M CORPORATION 1995
- | LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- +-----------------------------------------------------------------------------*/
-/*-----------------------------------------------------------------------------+
- |
- | File Name: miiphy.c
- |
- | Function: This module has utilities for accessing the MII PHY through
- | the EMAC3 macro.
- |
- | Author: Mark Wisner
- |
- +-----------------------------------------------------------------------------*/
-
-/* define DEBUG for debugging output (obviously ;-)) */
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <ppc4xx_enet.h>
-#include <405_mal.h>
-#include <miiphy.h>
-
-#if !defined(CONFIG_PHY_CLK_FREQ)
-#define CONFIG_PHY_CLK_FREQ 0
-#endif
-
-/***********************************************************/
-/* Dump out to the screen PHY regs */
-/***********************************************************/
-
-void miiphy_dump (char *devname, unsigned char addr)
-{
- unsigned long i;
- unsigned short data;
-
- for (i = 0; i < 0x1A; i++) {
- if (miiphy_read (devname, addr, i, &data)) {
- printf ("read error for reg %lx\n", i);
- return;
- }
- printf ("Phy reg %lx ==> %4x\n", i, data);
-
- /* jump to the next set of regs */
- if (i == 0x07)
- i = 0x0f;
-
- } /* end for loop */
-} /* end dump */
-
-/***********************************************************/
-/* (Re)start autonegotiation */
-/***********************************************************/
-int phy_setup_aneg (char *devname, unsigned char addr)
-{
- u16 bmcr;
-
-#if defined(CONFIG_PHY_DYNAMIC_ANEG)
- /*
- * Set up advertisement based on capablilities reported by the PHY.
- * This should work for both copper and fiber.
- */
- u16 bmsr;
-#if defined(CONFIG_PHY_GIGE)
- u16 exsr = 0x0000;
-#endif
-
- miiphy_read (devname, addr, PHY_BMSR, &bmsr);
-
-#if defined(CONFIG_PHY_GIGE)
- if (bmsr & PHY_BMSR_EXT_STAT)
- miiphy_read (devname, addr, PHY_EXSR, &exsr);
-
- if (exsr & (PHY_EXSR_1000XF | PHY_EXSR_1000XH)) {
- /* 1000BASE-X */
- u16 anar = 0x0000;
-
- if (exsr & PHY_EXSR_1000XF)
- anar |= PHY_X_ANLPAR_FD;
-
- if (exsr & PHY_EXSR_1000XH)
- anar |= PHY_X_ANLPAR_HD;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
- } else
-#endif
- {
- u16 anar, btcr;
-
- miiphy_read (devname, addr, PHY_ANAR, &anar);
- anar &= ~(0x5000 | PHY_ANLPAR_T4 | PHY_ANLPAR_TXFD |
- PHY_ANLPAR_TX | PHY_ANLPAR_10FD | PHY_ANLPAR_10);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &btcr);
- btcr &= ~(0x00FF | PHY_1000BTCR_1000FD | PHY_1000BTCR_1000HD);
-
- if (bmsr & PHY_BMSR_100T4)
- anar |= PHY_ANLPAR_T4;
-
- if (bmsr & PHY_BMSR_100TXF)
- anar |= PHY_ANLPAR_TXFD;
-
- if (bmsr & PHY_BMSR_100TXH)
- anar |= PHY_ANLPAR_TX;
-
- if (bmsr & PHY_BMSR_10TF)
- anar |= PHY_ANLPAR_10FD;
-
- if (bmsr & PHY_BMSR_10TH)
- anar |= PHY_ANLPAR_10;
-
- miiphy_write (devname, addr, PHY_ANAR, anar);
-
-#if defined(CONFIG_PHY_GIGE)
- if (exsr & PHY_EXSR_1000TF)
- btcr |= PHY_1000BTCR_1000FD;
-
- if (exsr & PHY_EXSR_1000TH)
- btcr |= PHY_1000BTCR_1000HD;
-
- miiphy_write (devname, addr, PHY_1000BTCR, btcr);
-#endif
- }
-
-#else /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
- /*
- * Set up standard advertisement
- */
- u16 adv;
-
- miiphy_read (devname, addr, PHY_ANAR, &adv);
- adv |= (PHY_ANLPAR_ACK | PHY_ANLPAR_TXFD | PHY_ANLPAR_TX |
- PHY_ANLPAR_10FD | PHY_ANLPAR_10);
- miiphy_write (devname, addr, PHY_ANAR, adv);
-
- miiphy_read (devname, addr, PHY_1000BTCR, &adv);
- adv |= (0x0300);
- miiphy_write (devname, addr, PHY_1000BTCR, adv);
-
-#endif /* defined(CONFIG_PHY_DYNAMIC_ANEG) */
-
- /* Start/Restart aneg */
- miiphy_read (devname, addr, PHY_BMCR, &bmcr);
- bmcr |= (PHY_BMCR_AUTON | PHY_BMCR_RST_NEG);
- miiphy_write (devname, addr, PHY_BMCR, bmcr);
-
- return 0;
-}
-
-/***********************************************************/
-/* read a phy reg and return the value with a rc */
-/***********************************************************/
-/* AMCC_TODO:
- * Find out of the choice for the emac for MDIO is from the bridges,
- * i.e. ZMII or RGMII as approporiate. If the bridges are not used
- * to determine the emac for MDIO, then is the SDR0_ETH_CFG[MDIO_SEL]
- * used? If so, then this routine below does not apply to the 460EX/GT.
- *
- * sr: Currently on 460EX only EMAC0 works with MDIO, so we always
- * return EMAC0 offset here
- * vg: For 460EX/460GT if internal GPCS PHY address is specified
- * return appropriate EMAC offset
- */
-unsigned int miiphy_getemac_offset(u8 addr)
-{
-#if (defined(CONFIG_440) && \
- !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) && \
- !defined(CONFIG_460EX) && !defined(CONFIG_460GT)) && \
- defined(CONFIG_NET_MULTI)
- unsigned long zmii;
- unsigned long eoffset;
-
- /* Need to find out which mdi port we're using */
- zmii = in_be32((void *)ZMII0_FER);
-
- if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0)))
- /* using port 0 */
- eoffset = 0;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (1)))
- /* using port 1 */
- eoffset = 0x100;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (2)))
- /* using port 2 */
- eoffset = 0x400;
-
- else if (zmii & (ZMII_FER_MDI << ZMII_FER_V (3)))
- /* using port 3 */
- eoffset = 0x600;
-
- else {
- /* None of the mdi ports are enabled! */
- /* enable port 0 */
- zmii |= ZMII_FER_MDI << ZMII_FER_V (0);
- out_be32((void *)ZMII0_FER, zmii);
- eoffset = 0;
- /* need to soft reset port 0 */
- zmii = in_be32((void *)EMAC0_MR0);
- zmii |= EMAC_MR0_SRST;
- out_be32((void *)EMAC0_MR0, zmii);
- }
-
- return (eoffset);
-#else
-
-#if defined(CONFIG_NET_MULTI) && defined(CONFIG_405EX)
- unsigned long rgmii;
- int devnum = 1;
-
- rgmii = in_be32((void *)RGMII_FER);
- if (rgmii & (1 << (19 - devnum)))
- return 0x100;
-#endif
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- u32 eoffset = 0;
-
- switch (addr) {
-#if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR)
- case CONFIG_GPCS_PHY1_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100)))
- eoffset = 0x100;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR)
- case CONFIG_GPCS_PHY2_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300)))
- eoffset = 0x300;
- break;
-#endif
-#if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR)
- case CONFIG_GPCS_PHY3_ADDR:
- if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400)))
- eoffset = 0x400;
- break;
-#endif
- default:
- eoffset = 0;
- break;
- }
- return eoffset;
-#endif
-
- return 0;
-#endif
-}
-
-static int emac_miiphy_wait(u32 emac_reg)
-{
- u32 sta_reg;
- int i;
-
- /* wait for completion */
- i = 0;
- do {
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- if (i++ > 5) {
- debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__,
- __LINE__, sta_reg);
- return -1;
- }
- udelay(10);
- } while ((sta_reg & EMAC_STACR_OC) == EMAC_STACR_OC_MASK);
-
- return 0;
-}
-
-static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value)
-{
- u32 emac_reg;
- u32 sta_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- sta_reg = reg; /* reg address */
-
- /* set clock (50MHz) and read flags */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_405EX)
-#if defined(CONFIG_IBM_EMAC4_V4) /* EMAC4 V4 changed bit setting */
- sta_reg = (sta_reg & ~EMAC_STACR_OP_MASK) | cmd;
-#else
- sta_reg |= cmd;
-#endif
-#else
- sta_reg = (sta_reg | cmd) & ~EMAC_STACR_CLK_100MHZ;
-#endif
-
- /* Some boards (mainly 405EP based) define the PHY clock freqency fixed */
- sta_reg = sta_reg | CONFIG_PHY_CLK_FREQ;
- sta_reg = sta_reg | ((u32)addr << 5); /* Phy address */
- sta_reg = sta_reg | EMAC_STACR_OC_MASK; /* new IBM emac v4 */
- if (cmd == EMAC_STACR_WRITE)
- memcpy(&sta_reg, &value, 2); /* put in data */
-
- out_be32((void *)EMAC0_STACR + emac_reg, sta_reg);
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
-
- /* wait for completion */
- if (emac_miiphy_wait(emac_reg) != 0)
- return -1;
-
- debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg);
- if ((sta_reg & EMAC_STACR_PHYE) != 0)
- return -1;
-
- return 0;
-}
-
-int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg,
- unsigned short *value)
-{
- unsigned long sta_reg;
- unsigned long emac_reg;
-
- emac_reg = miiphy_getemac_offset(addr);
-
- if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0)
- return -1;
-
- sta_reg = in_be32((void *)EMAC0_STACR + emac_reg);
- *value = sta_reg >> 16;
-
- return 0;
-}
-
-/***********************************************************/
-/* write a phy reg and return the value with a rc */
-/***********************************************************/
-
-int emac4xx_miiphy_write (char *devname, unsigned char addr, unsigned char reg,
- unsigned short value)
-{
- return emac_miiphy_command(addr, reg, EMAC_STACR_WRITE, value);
-}
diff --git a/cpu/ppc4xx/reginfo.c b/cpu/ppc4xx/reginfo.c
deleted file mode 100644
index a975667..0000000
--- a/cpu/ppc4xx/reginfo.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- *(C) Copyright 2005-2009 Netstal Maschinen AG
- * Bruno Hars (Bruno.Hars@netstal.com)
- * Niklaus Giger (Niklaus.Giger@netstal.com)
- *
- * This source code is free software; you can redistribute it
- * and/or modify it in source code form under the terms of the GNU
- * General Public License as published by the Free Software
- * Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- */
-
-/*
- * reginfo.c - register dump of HW-configuratin register for PPC4xx based board
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/ppc4xx-uic.h>
-#include <ppc4xx_enet.h>
-
-enum REGISTER_TYPE {
- IDCR1, /* Indirectly Accessed DCR via SDRAM0_CFGADDR/SDRAM0_CFGDATA */
- IDCR2, /* Indirectly Accessed DCR via EBC0_CFGADDR/EBC0_CFGDATA */
- IDCR3, /* Indirectly Accessed DCR via EBM0_CFGADDR/EBM0_CFGDATA */
- IDCR4, /* Indirectly Accessed DCR via PPM0_CFGADDR/PPM0_CFGDATA */
- IDCR5, /* Indirectly Accessed DCR via CPR0_CFGADDR/CPR0_CFGDATA */
- IDCR6, /* Indirectly Accessed DCR via SDR0_CFGADDR/SDR0_CFGDATA */
- MM /* Directly Accessed MMIO Register */
-};
-
-struct cpu_register {
- char *name;
- enum REGISTER_TYPE type;
- u32 address;
-};
-
-/*
- * PPC440EPx registers ordered for output
- * name type addr size
- * -------------------------------------------
- */
-
-const struct cpu_register ppc4xx_reg[] = {
- {"PB0CR", IDCR2, PB0CR},
- {"PB0AP", IDCR2, PB0AP},
- {"PB1CR", IDCR2, PB1CR},
- {"PB1AP", IDCR2, PB1AP},
- {"PB2CR", IDCR2, PB2CR},
- {"PB2AP", IDCR2, PB2AP},
- {"PB3CR", IDCR2, PB3CR},
- {"PB3AP", IDCR2, PB3AP},
-
- {"PB4CR", IDCR2, PB4CR},
- {"PB4AP", IDCR2, PB4AP},
-#if !defined(CONFIG_405EP)
- {"PB5CR", IDCR2, PB5CR},
- {"PB5AP", IDCR2, PB5AP},
- {"PB6CR", IDCR2, PB6CR},
- {"PB6AP", IDCR2, PB6AP},
- {"PB7CR", IDCR2, PB7CR},
- {"PB7AP", IDCR2, PB7AP},
-#endif
-
- {"PBEAR", IDCR2, PBEAR},
-#if defined(CONFIG_405EP) || defined (CONFIG_405GP)
- {"PBESR0", IDCR2, PBESR0},
- {"PBESR1", IDCR2, PBESR1},
-#endif
- {"EBC0_CFG", IDCR2, EBC0_CFG},
-
-#ifdef CONFIG_405GP
- {"SDRAM0_BESR0", IDCR1, SDRAM0_BESR0},
- {"SDRAM0_BESRS0", IDCR1, SDRAM0_BESRS0},
- {"SDRAM0_BESR1", IDCR1, SDRAM0_BESR1},
- {"SDRAM0_BESRS1", IDCR1, SDRAM0_BESRS1},
- {"SDRAM0_BEAR", IDCR1, SDRAM0_BEAR},
- {"SDRAM0_CFG", IDCR1, SDRAM0_CFG},
- {"SDRAM0_RTR", IDCR1, SDRAM0_RTR},
- {"SDRAM0_PMIT", IDCR1, SDRAM0_PMIT},
-
- {"SDRAM0_B0CR", IDCR1, SDRAM0_B0CR},
- {"SDRAM0_B1CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_B2CR", IDCR1, SDRAM0_B2CR},
- {"SDRAM0_B3CR", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_TR", IDCR1, SDRAM0_TR},
- {"SDRAM0_ECCCFG", IDCR1, SDRAM0_B1CR},
- {"SDRAM0_ECCESR", IDCR1, SDRAM0_ECCESR},
-
-
-#endif
-
-#ifdef CONFIG_440EPX
- {"SDR0_SDSTP0", IDCR6, SDR0_SDSTP0},
- {"SDR0_SDSTP1", IDCR6, SDR0_SDSTP1},
- {"SDR0_SDSTP2", IDCR6, SDR0_SDSTP2},
- {"SDR0_SDSTP3", IDCR6, SDR0_SDSTP3},
- {"SDR0_CUST0", IDCR6, SDR0_CUST0},
- {"SDR0_CUST1", IDCR6, SDR0_CUST1},
- {"SDR0_EBC0", IDCR6, SDR0_EBC0},
- {"SDR0_AMP0", IDCR6, SD0_AMP0},
- {"SDR0_AMP1", IDCR6, SD0_AMP1},
- {"SDR0_CP440", IDCR6, SDR0_CP440},
- {"SDR0_CRYP0", IDCR6, SDR0_CRYP0},
- {"SDR0_DDRCFG", IDCR6, SDR0_DDRCFG},
- {"SDR0_EMAC0RXST", IDCR6, SDR0_EMAC0RXST},
- {"SDR0_EMAC0TXST", IDCR6, SDR0_EMAC0TXST},
- {"SDR0_MFR", IDCR6, SDR0_MFR},
- {"SDR0_PCI0", IDCR6, SDR0_PCI0},
- {"SDR0_PFC0", IDCR6, SDR0_PFC0},
- {"SDR0_PFC1", IDCR6, SDR0_PFC1},
- {"SDR0_PFC2", IDCR6, SDR0_PFC2},
- {"SDR0_PFC4", IDCR6, SDR0_PFC4},
- {"SDR0_UART0", IDCR6, SDR0_UART0},
- {"SDR0_UART1", IDCR6, SDR0_UART1},
- {"SDR0_UART2", IDCR6, SDR0_UART2},
- {"SDR0_UART3", IDCR6, SDR0_UART3},
- {"DDR0_02", IDCR1, DDR0_02},
- {"DDR0_00", IDCR1, DDR0_00},
- {"DDR0_01", IDCR1, DDR0_01},
- {"DDR0_03", IDCR1, DDR0_03},
- {"DDR0_04", IDCR1, DDR0_04},
- {"DDR0_05", IDCR1, DDR0_05},
- {"DDR0_06", IDCR1, DDR0_06},
- {"DDR0_07", IDCR1, DDR0_07},
- {"DDR0_08", IDCR1, DDR0_08},
- {"DDR0_09", IDCR1, DDR0_09},
- {"DDR0_10", IDCR1, DDR0_10},
- {"DDR0_11", IDCR1, DDR0_11},
- {"DDR0_12", IDCR1, DDR0_12},
- {"DDR0_14", IDCR1, DDR0_14},
- {"DDR0_17", IDCR1, DDR0_17},
- {"DDR0_18", IDCR1, DDR0_18},
- {"DDR0_19", IDCR1, DDR0_19},
- {"DDR0_20", IDCR1, DDR0_20},
- {"DDR0_21", IDCR1, DDR0_21},
- {"DDR0_22", IDCR1, DDR0_22},
- {"DDR0_23", IDCR1, DDR0_23},
- {"DDR0_24", IDCR1, DDR0_24},
- {"DDR0_25", IDCR1, DDR0_25},
- {"DDR0_26", IDCR1, DDR0_26},
- {"DDR0_27", IDCR1, DDR0_27},
- {"DDR0_28", IDCR1, DDR0_28},
- {"DDR0_31", IDCR1, DDR0_31},
- {"DDR0_32", IDCR1, DDR0_32},
- {"DDR0_33", IDCR1, DDR0_33},
- {"DDR0_34", IDCR1, DDR0_34},
- {"DDR0_35", IDCR1, DDR0_35},
- {"DDR0_36", IDCR1, DDR0_36},
- {"DDR0_37", IDCR1, DDR0_37},
- {"DDR0_38", IDCR1, DDR0_38},
- {"DDR0_39", IDCR1, DDR0_39},
- {"DDR0_40", IDCR1, DDR0_40},
- {"DDR0_41", IDCR1, DDR0_41},
- {"DDR0_42", IDCR1, DDR0_42},
- {"DDR0_43", IDCR1, DDR0_43},
- {"DDR0_44", IDCR1, DDR0_44},
- {"CPR0_ICFG", IDCR5, CPR0_ICFG},
- {"CPR0_MALD", IDCR5, CPR0_MALD},
- {"CPR0_OPBD00", IDCR5, CPR0_OPBD0},
- {"CPR0_PERD0", IDCR5, CPR0_PERD},
- {"CPR0_PLLC0", IDCR5, CPR0_PLLC},
- {"CPR0_PLLD0", IDCR5, CPR0_PLLD},
- {"CPR0_PRIMAD0", IDCR5, CPR0_PRIMAD0},
- {"CPR0_PRIMBD0", IDCR5, CPR0_PRIMBD0},
- {"CPR0_SPCID", IDCR5, CPR0_SPCID},
- {"SPI0_MODE", MM, SPI0_MODE},
- {"IIC0_CLKDIV", MM, PCIL0_PMM1MA},
- {"PCIL0_PMM0MA", MM, PCIL0_PMM0MA},
- {"PCIL0_PMM1MA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM1MS", MM, PCIL0_PTM1MS},
- {"PCIL0_PTM2LA", MM, PCIL0_PMM1MA},
- {"PCIL0_PTM2MS", MM, PCIL0_PTM2MS},
- {"ZMII0_FER", MM, ZMII0_FER},
- {"ZMII0_SSR", MM, ZMII0_SSR},
- {"EMAC0_IPGVR", MM, EMAC0_IPGVR},
- {"EMAC0_MR1", MM, EMAC0_MR1},
- {"EMAC0_PTR", MM, EMAC0_PTR},
- {"EMAC0_RWMR", MM, EMAC0_RWMR},
- {"EMAC0_STACR", MM, EMAC0_STACR},
- {"EMAC0_TMR0", MM, EMAC0_TMR0},
- {"EMAC0_TMR1", MM, EMAC0_TMR1},
- {"EMAC0_TRTR", MM, EMAC0_TRTR},
- {"EMAC1_MR1", MM, EMAC1_MR1},
- {"GPIO0_OR", MM, GPIO0_OR},
- {"GPIO1_OR", MM, GPIO1_OR},
- {"GPIO0_TCR", MM, GPIO0_TCR},
- {"GPIO1_TCR", MM, GPIO1_TCR},
- {"GPIO0_ODR", MM, GPIO0_ODR},
- {"GPIO1_ODR", MM, GPIO1_ODR},
- {"GPIO0_OSRL", MM, GPIO0_OSRL},
- {"GPIO0_OSRH", MM, GPIO0_OSRH},
- {"GPIO1_OSRL", MM, GPIO1_OSRL},
- {"GPIO1_OSRH", MM, GPIO1_OSRH},
- {"GPIO0_TSRL", MM, GPIO0_TSRL},
- {"GPIO0_TSRH", MM, GPIO0_TSRH},
- {"GPIO1_TSRL", MM, GPIO1_TSRL},
- {"GPIO1_TSRH", MM, GPIO1_TSRH},
- {"GPIO0_IR", MM, GPIO0_IR},
- {"GPIO1_IR", MM, GPIO1_IR},
- {"GPIO0_ISR1L", MM, GPIO0_ISR1L},
- {"GPIO0_ISR1H", MM, GPIO0_ISR1H},
- {"GPIO1_ISR1L", MM, GPIO1_ISR1L},
- {"GPIO1_ISR1H", MM, GPIO1_ISR1H},
- {"GPIO0_ISR2L", MM, GPIO0_ISR2L},
- {"GPIO0_ISR2H", MM, GPIO0_ISR2H},
- {"GPIO1_ISR2L", MM, GPIO1_ISR2L},
- {"GPIO1_ISR2H", MM, GPIO1_ISR2H},
- {"GPIO0_ISR3L", MM, GPIO0_ISR3L},
- {"GPIO0_ISR3H", MM, GPIO0_ISR3H},
- {"GPIO1_ISR3L", MM, GPIO1_ISR3L},
- {"GPIO1_ISR3H", MM, GPIO1_ISR3H},
- {"SDR0_USB2PHY0CR", IDCR6, SDR0_USB2PHY0CR},
- {"SDR0_USB2H0CR", IDCR6, SDR0_USB2H0CR},
- {"SDR0_USB2D0CR", IDCR6, SDR0_USB2D0CR},
-#endif
-};
-
-/*
- * CPU Register dump of PPC4xx HW configuration registers
- * Output: first all DCR-registers, then in order of struct ppc4xx_reg
- */
-#define PRINT_DCR(dcr) printf("0x%08x %-16s: 0x%08x\n", dcr,#dcr, mfdcr(dcr));
-
-void ppc4xx_reginfo(void)
-{
- unsigned int i;
- unsigned int n;
- u32 value;
- enum REGISTER_TYPE type;
-#if defined (CONFIG_405EP)
- printf("Dump PPC405EP HW configuration registers\n\n");
-#elif CONFIG_405GP
- printf ("Dump 405GP HW configuration registers\n\n");
-#elif CONFIG_440EPX
- printf("Dump PPC440EPx HW configuration registers\n\n");
-#endif
- printf("MSR: 0x%08x\n", mfmsr());
-
- printf ("\nUniversal Interrupt Controller Regs\n");
- PRINT_DCR(UIC0SR);
- PRINT_DCR(UIC0ER);
- PRINT_DCR(UIC0CR);
- PRINT_DCR(UIC0PR);
- PRINT_DCR(UIC0TR);
- PRINT_DCR(UIC0MSR);
- PRINT_DCR(UIC0VR);
- PRINT_DCR(UIC0VCR);
-
-#if (UIC_MAX > 1)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 2)
- PRINT_DCR(UIC2SR);
- PRINT_DCR(UIC2ER);
- PRINT_DCR(UIC2CR);
- PRINT_DCR(UIC2PR);
- PRINT_DCR(UIC2TR);
- PRINT_DCR(UIC2MSR);
- PRINT_DCR(UIC2VR);
- PRINT_DCR(UIC2VCR);
-#endif
-
-#if (UIC_MAX > 3)
- PRINT_DCR(UIC3SR);
- PRINT_DCR(UIC3ER);
- PRINT_DCR(UIC3CR);
- PRINT_DCR(UIC3PR);
- PRINT_DCR(UIC3TR);
- PRINT_DCR(UIC3MSR);
- PRINT_DCR(UIC3VR);
- PRINT_DCR(UIC3VCR);
-#endif
-
-#if defined (CONFIG_405EP) || defined (CONFIG_405GP)
- printf ("\n\nDMA Channels\n");
- PRINT_DCR(DMASR);
- PRINT_DCR(DMASGC);
- PRINT_DCR(DMAADR);
-
- PRINT_DCR(DMACR0);
- PRINT_DCR(DMACT0);
- PRINT_DCR(DMADA0);
- PRINT_DCR(DMASA0);
- PRINT_DCR(DMASB0);
-
- PRINT_DCR(DMACR1);
- PRINT_DCR(DMACT1);
- PRINT_DCR(DMADA1);
- PRINT_DCR(DMASA1);
- PRINT_DCR(DMASB1);
-
- PRINT_DCR(DMACR2);
- PRINT_DCR(DMACT2);
- PRINT_DCR(DMADA2);
- PRINT_DCR(DMASA2);
- PRINT_DCR(DMASB2);
-
- PRINT_DCR(DMACR3);
- PRINT_DCR(DMACT3);
- PRINT_DCR(DMADA3);
- PRINT_DCR(DMASA3);
- PRINT_DCR(DMASB3);
-#endif
-
- printf ("\n\nVarious HW-Configuration registers\n");
-#if defined (CONFIG_440EPX)
- PRINT_DCR(MAL0_CFG);
- PRINT_DCR(CPM0_ER);
- PRINT_DCR(CPM1_ER);
- PRINT_DCR(PLB4A0_ACR);
- PRINT_DCR(PLB4A1_ACR);
- PRINT_DCR(PLB3A0_ACR);
- PRINT_DCR(OPB2PLB40_BCTRL);
- PRINT_DCR(P4P3BO0_CFG);
-#endif
- n = sizeof(ppc4xx_reg) / sizeof(ppc4xx_reg[0]);
- for (i = 0; i < n; i++) {
- value = 0;
- type = ppc4xx_reg[i].type;
- switch (type) {
- case IDCR1: /* Indirect via SDRAM0_CFGADDR/DDR0_CFGDATA */
- mtdcr(SDRAM0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDRAM0_CFGDATA);
- break;
- case IDCR2: /* Indirect via EBC0_CFGADDR/EBC0_CFGDATA */
- mtdcr(EBC0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(EBC0_CFGDATA);
- break;
- case IDCR5: /* Indirect via CPR0_CFGADDR/CPR0_CFGDATA */
- mtdcr(CPR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(CPR0_CFGDATA);
- break;
- case IDCR6: /* Indirect via SDR0_CFGADDR/SDR0_CFGDATA */
- mtdcr(SDR0_CFGADDR, ppc4xx_reg[i].address);
- value = mfdcr(SDR0_CFGDATA);
- break;
- case MM: /* Directly Accessed MMIO Register */
- value = in_be32((const volatile unsigned __iomem *)
- ppc4xx_reg[i].address);
- break;
- default:
- printf("\nERROR: struct entry %d: unknown register"
- "type\n", i);
- break;
- }
- printf("0x%08x %-16s: 0x%08x\n",ppc4xx_reg[i].address,
- ppc4xx_reg[i].name, value);
- }
-}
diff --git a/cpu/ppc4xx/resetvec.S b/cpu/ppc4xx/resetvec.S
deleted file mode 100644
index b3308bd..0000000
--- a/cpu/ppc4xx/resetvec.S
+++ /dev/null
@@ -1,12 +0,0 @@
-/* Copyright MontaVista Software Incorporated, 2000 */
-#include <config.h>
- .section .resetvec,"ax"
-#if defined(CONFIG_440)
- b _start_440
-#else
-#if defined(CONFIG_BOOT_PCI) && defined(CONFIG_MIP405)
- b _start_pci
-#else
- b _start
-#endif
-#endif
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
deleted file mode 100644
index 30c6e0e..0000000
--- a/cpu/ppc4xx/sdram.c
+++ /dev/null
@@ -1,468 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * (C) Copyright 2002-2004
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-#include "sdram.h"
-#include "ecc.h"
-
-#ifdef CONFIG_SDRAM_BANK0
-
-#ifndef CONFIG_440
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
- {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
- {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */
- {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
- {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#ifdef CONFIG_SYS_SDRAM_CASL
-static ulong ns2clks(ulong ns)
-{
- ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
-
- return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
-}
-#endif /* CONFIG_SYS_SDRAM_CASL */
-
-static ulong compute_sdtr1(ulong speed)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
- ulong sdtr1 = 0;
-
- /* CASL */
- if (CONFIG_SYS_SDRAM_CASL < 2)
- sdtr1 |= (1 << SDRAM0_TR_CASL);
- else
- if (CONFIG_SYS_SDRAM_CASL > 4)
- sdtr1 |= (3 << SDRAM0_TR_CASL);
- else
- sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
-
- /* PTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
-
- /* CTP */
- tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
-
- /* LDF */
- tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
- else
- sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
-
- /* RFTA */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
- if ((tmp >= 4) && (tmp <= 10))
- sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
- else
- sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
-
- /* RCD */
- tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
- if ((tmp >= 2) && (tmp <= 4))
- sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
- else
- sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
-
- return sdtr1;
-#else /* CONFIG_SYS_SDRAM_CASL */
- /*
- * If no values are configured in the board config file
- * use the default values, which seem to be ok for most
- * boards.
- *
- * REMARK:
- * For new board ports we strongly recommend to define the
- * correct values for the used SDRAM chips in your board
- * config file (see PPChameleonEVB.h)
- */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x01074015;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x0086400d;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/* refresh is expressed in ms */
-static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
-{
-#ifdef CONFIG_SYS_SDRAM_CASL
- ulong tmp;
-
- tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
- tmp /= 1000000;
-
- return ((tmp & 0x00003FF8) << 16);
-#else /* CONFIG_SYS_SDRAM_CASL */
- if (speed > 100000000) {
- /*
- * 133 MHz SDRAM
- */
- return 0x07f00000;
- } else {
- /*
- * default: 100 MHz SDRAM
- */
- return 0x05f00000;
- }
-#endif /* CONFIG_SYS_SDRAM_CASL */
-}
-
-/*
- * Autodetect onboard SDRAM on 405 platforms
- */
-phys_size_t initdram(int board_type)
-{
- ulong speed;
- ulong sdtr1;
- int i;
-
- /*
- * Determine SDRAM speed
- */
- speed = get_bus_freq(0); /* parameter not used on ppc4xx */
-
- /*
- * sdtr1 (register SDRAM0_TR) must take into account timings listed
- * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into
- * account actual SDRAM size. So we can set up sdtr1 according to what
- * is specified in board configuration file while rtr dependds on SDRAM
- * size we are assuming before detection.
- */
- sdtr1 = compute_sdtr1(speed);
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG, 0x00000000);
-
- /*
- * Set MB0CF for bank 0.
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR, sdtr1);
- mtsdram(SDRAM0_RTR, compute_rtr(speed, mb0cf[i].rows, 64));
-
- udelay(200);
-
- /*
- * Set memory controller options reg, MCOPT1.
- * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
- * read/prefetch.
- */
- mtsdram(SDRAM0_CFG, 0x80800000);
-
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG, 0x00000000);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG, 0x80800000);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
- mb0cf[i].size) {
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG, 0);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0;
-}
-
-#else /* CONFIG_440 */
-
-/*
- * Define some default values. Those can be overwritten in the
- * board config file.
- */
-
-#ifndef CONFIG_SYS_SDRAM_TABLE
-sdram_conf_t mb0cf[] = {
- {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
- {(128 << 20), 13, 0x000A4001}, /* 128MB mode 3, 13x10(4) */
- {(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
-};
-#else
-sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_TR0
-#define CONFIG_SYS_SDRAM0_TR0 0x41094012
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_WDDCTR
-#define CONFIG_SYS_SDRAM0_WDDCTR 0x00000000 /* wrcp=0 dcd=0 */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_RTR
-#define CONFIG_SYS_SDRAM0_RTR 0x04100000 /* 7.8us @ 133MHz PLB */
-#endif
-
-#ifndef CONFIG_SYS_SDRAM0_CFG0
-#define CONFIG_SYS_SDRAM0_CFG0 0x82000000 /* DCEN=1, PMUD=0, 64-bit */
-#endif
-
-#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-
-#define NUM_TRIES 64
-#define NUM_READS 10
-
-static void sdram_tr1_set(int ram_address, int* tr1_value)
-{
- int i;
- int j, k;
- volatile unsigned int* ram_pointer = (unsigned int *)ram_address;
- int first_good = -1, last_bad = 0x1ff;
-
- unsigned long test[NUM_TRIES] = {
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
- 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 };
-
- /* go through all possible SDRAM0_TR1[RDCT] values */
- for (i=0; i<=0x1ff; i++) {
- /* set the current value for TR1 */
- mtsdram(SDRAM0_TR1, (0x80800800 | i));
-
- /* write values */
- for (j=0; j<NUM_TRIES; j++) {
- ram_pointer[j] = test[j];
-
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
- }
-
- /* read values back */
- for (j=0; j<NUM_TRIES; j++) {
- for (k=0; k<NUM_READS; k++) {
- /* clear any cache at ram location */
- __asm__("dcbf 0,%0": :"r" (&ram_pointer[j]));
-
- if (ram_pointer[j] != test[j])
- break;
- }
-
- /* read error */
- if (k != NUM_READS)
- break;
- }
-
- /* we have a SDRAM0_TR1[RDCT] that is part of the window */
- if (j == NUM_TRIES) {
- if (first_good == -1)
- first_good = i; /* found beginning of window */
- } else { /* bad read */
- /* if we have not had a good read then don't care */
- if (first_good != -1) {
- /* first failure after a good read */
- last_bad = i-1;
- break;
- }
- }
- }
-
- /* return the current value for TR1 */
- *tr1_value = (first_good + last_bad) / 2;
-}
-
-/*
- * Autodetect onboard DDR SDRAM on 440 platforms
- *
- * NOTE: Some of the hardcoded values are hardware dependant,
- * so this should be extended for other future boards
- * using this routine!
- */
-phys_size_t initdram(int board_type)
-{
- int i;
- int tr1_bank1;
-
-#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || \
- defined(CONFIG_440GR) || defined(CONFIG_440SP)
- /*
- * Soft-reset SDRAM controller.
- */
- mtsdr(SDR0_SRST, SDR0_SRST_DMC);
- mtsdr(SDR0_SRST, 0x00000000);
-#endif
-
- for (i=0; i<N_MB0CF; i++) {
- /*
- * Disable memory controller.
- */
- mtsdram(SDRAM0_CFG0, 0x00000000);
-
- /*
- * Setup some default
- */
- mtsdram(SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */
- mtsdram(SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram(SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram(SDRAM0_WDDCTR, CONFIG_SYS_SDRAM0_WDDCTR);
- mtsdram(SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
-
- /*
- * Following for CAS Latency = 2.5 @ 133 MHz PLB
- */
- mtsdram(SDRAM0_B0CR, mb0cf[i].reg);
- mtsdram(SDRAM0_TR0, CONFIG_SYS_SDRAM0_TR0);
- mtsdram(SDRAM0_TR1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
- mtsdram(SDRAM0_RTR, CONFIG_SYS_SDRAM0_RTR);
- mtsdram(SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM*/
- udelay(400); /* Delay 200 usecs (min) */
-
- /*
- * Enable the controller, then wait for DCEN to complete
- */
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
- phys_size_t size = mb0cf[i].size;
- /*
- * Optimize TR1 to current hardware environment
- */
- sdram_tr1_set(0x00000000, &tr1_bank1);
- mtsdram(SDRAM0_TR1, (tr1_bank1 | 0x80800800));
-
-
- /*
- * OK, size detected. Enable second bank if
- * defined (assumes same type as bank 0)
- */
-#ifdef CONFIG_SDRAM_BANK1
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, mb0cf[i].size | mb0cf[i].reg);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
-
- /*
- * Check if 2nd bank is really available.
- * If the size not equal to the size of the first
- * bank, then disable the 2nd bank completely.
- */
- if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size)
- != mb0cf[i].size) {
- mtsdram(SDRAM0_CFG0, 0);
- mtsdram(SDRAM0_B1CR, 0);
- mtsdram(SDRAM0_CFG0, CONFIG_SYS_SDRAM0_CFG0);
- udelay(10000);
- } else {
- /*
- * We have two identical banks, so the size
- * is twice the bank size
- */
- size = 2 * size;
- }
-#endif
-
-#ifdef CONFIG_SDRAM_ECC
- ecc_init(0, size);
-#endif
-
- /*
- * OK, size detected -> all done
- */
- return size;
- }
- }
-
- return 0; /* nothing found ! */
-}
-
-#endif /* CONFIG_440 */
-
-#endif /* CONFIG_SDRAM_BANK0 */
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
deleted file mode 100644
index bea3376..0000000
--- a/cpu/ppc4xx/sdram.h
+++ /dev/null
@@ -1,76 +0,0 @@
-/*
- * (C) Copyright 2006
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * (C) Copyright 2006
- * DAVE Srl <www.dave-tech.it>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _SDRAM_H_
-#define _SDRAM_H_
-
-#include <config.h>
-
-#define ONE_BILLION 1000000000
-
-struct sdram_conf_s {
- unsigned long size;
- int rows;
- unsigned long reg;
-};
-
-typedef struct sdram_conf_s sdram_conf_t;
-
-/* Bitfields offsets */
-#define SDRAM0_TR_CASL (31 - 8)
-#define SDRAM0_TR_PTA (31 - 13)
-#define SDRAM0_TR_CTP (31 - 15)
-#define SDRAM0_TR_LDF (31 - 17)
-#define SDRAM0_TR_RFTA (31 - 29)
-#define SDRAM0_TR_RCD (31 - 31)
-
-#ifdef CONFIG_SYS_SDRAM_CL
-/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
-#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
-#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
-#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
-#define CONFIG_SYS_SDRAM_LDF 0
-#ifdef CONFIG_SYS_SDRAM_tRFC
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
-#else
-#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
-#endif
-#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
-#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
-
-/*
- * Some defines for the 440 DDR controller
- */
-#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */
-#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/
-#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */
-#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */
-#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */
-#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */
-#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */
-#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */
-
-#endif
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
deleted file mode 100644
index 906face..0000000
--- a/cpu/ppc4xx/speed.c
+++ /dev/null
@@ -1,1177 +0,0 @@
-/*
- * (C) Copyright 2000-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ppc_asm.tmpl>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define ONE_BILLION 1000000000
-#ifdef DEBUG
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-#define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
-
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- uint pvr = get_pvr();
- unsigned long psr;
- unsigned long m;
-
- /*
- * Read PLL Mode register
- */
- pllmr = mfdcr (CPC0_PLLMR);
-
- /*
- * Read Pin Strapping register
- */
- psr = mfdcr (CPC0_PSR);
-
- /*
- * Determine FWD_DIV.
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
- if (sysInfo->pllFbkDiv == 0) {
- sysInfo->pllFbkDiv = 16;
- }
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
-
- /*
- * Check if PPC405GPr used (mask minor revision field)
- */
- if ((pvr & 0xfffffff0) == (PVR_405GPR_RB & 0xfffffff0)) {
- /*
- * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
- */
- sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
-
- /*
- * Determine factor m depending on PLL feedback clock source
- */
- if (!(psr & PSR_PCI_ASYNC_EN)) {
- if (psr & PSR_NEW_MODE_EN) {
- /*
- * sync pci clock used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
- } else {
- /*
- * sync pci clock used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
- }
- } else if (psr & PSR_NEW_MODE_EN) {
- if (psr & PSR_PERCLK_SYNC_MODE_EN) {
- /*
- * PerClk used as feedback (new mode)
- */
- m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
- } else {
- /*
- * CPU clock used as feedback (new mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
- }
- } else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
- /*
- * PerClk used as feedback (legacy mode)
- */
- m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
- } else {
- /*
- * PLB clock used as feedback (legacy mode)
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
- }
-
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
- sysInfo->freqProcessor = sysInfo->freqVCOHz / sysInfo->pllFwdDiv;
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
- } else {
- /*
- * Check pllFwdDiv to see if running in bypass mode where the CPU speed
- * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
- * to make sure it is within the proper range.
- * spec: VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
- * Note freqVCO is calculated in MHz to avoid errors introduced by rounding.
- */
- if (sysInfo->pllFwdDiv == 1) {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
- sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
- } else {
- sysInfo->freqVCOHz = ( 1000000000000LL *
- (unsigned long long)sysInfo->pllFwdDiv *
- (unsigned long long)sysInfo->pllFbkDiv *
- (unsigned long long)sysInfo->pllPlbDiv
- ) / (unsigned long long)sysClkPeriodPs;
- sysInfo->freqPLB = (ONE_BILLION / ((sysClkPeriodPs * 10) /
- sysInfo->pllFbkDiv)) * 10000;
- sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
- }
- }
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqProcessor;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-
-#elif defined(CONFIG_440)
-
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
-static u8 pll_fwdv_multi_bits[] = {
- /* values for: 1 - 16 */
- 0x00, 0x01, 0x0f, 0x04, 0x09, 0x0a, 0x0d, 0x0e, 0x03, 0x0c,
- 0x05, 0x08, 0x07, 0x02, 0x0b, 0x06
-};
-
-u32 get_cpr0_fwdv(unsigned long cpr_reg_fwdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fwdv_multi_bits); index++)
- if (cpr_reg_fwdv == (u32)pll_fwdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-static u8 pll_fbdv_multi_bits[] = {
- /* values for: 1 - 100 */
- 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
- 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
- 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
- 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
- 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
- 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
- 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
- 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
- /* values for: 101 - 200 */
- 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
- 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
- 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
- 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
- 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
- 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
- 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
- 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
- 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
- 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
- /* values for: 201 - 255 */
- 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
- 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
- 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
- 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
- 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
- 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
-};
-
-u32 get_cpr0_fbdv(unsigned long cpr_reg_fbdv)
-{
- u32 index;
-
- for (index = 0; index < ARRAY_SIZE(pll_fbdv_multi_bits); index++)
- if (cpr_reg_fbdv == (u32)pll_fbdv_multi_bits[index])
- return index + 1;
-
- return 0;
-}
-
-/*
- * AMCC_TODO: verify this routine against latest EAS, cause stuff changed
- * with latest EAS
- */
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long m;
- unsigned long plbedv0;
-
- /* Extract configured divisors */
- mfsdr(SDR0_SDSTP0, strp0);
- mfsdr(SDR0_SDSTP1, strp1);
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 4);
- sysInfo->pllFwdDivA = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FWD_DIV_B_MASK);
- sysInfo->pllFwdDivB = get_cpr0_fwdv(temp);
-
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 8;
- sysInfo->pllFbkDiv = get_cpr0_fbdv(temp);
-
- temp = (strp1 & PLLSYS0_OPB_DIV_MASK) >> 26;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- /* AMCC_TODO: verify the SDR0_SDSTP1.PERDV0 value sysInfo->pllExtBusDiv */
- temp = (strp1 & PLLSYS0_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
-
- temp = (strp1 & PLLSYS0_PLBEDV0_DIV_MASK) >> 29;
- plbedv0 = temp ? temp: 8;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) {
- /* PLL internal feedback */
- m = sysInfo->pllFbkDiv;
- } else {
- /* PLL PerClk feedback */
- m = sysInfo->pllFwdDivA * plbedv0 * sysInfo->pllOpbDiv *
- sysInfo->pllExtBusDiv;
- }
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz / sysInfo->pllFwdDivA / plbedv0;
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- return;
-}
-
-#elif defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
-void get_sys_info (sys_info_t *sysInfo)
-{
- unsigned long temp;
- unsigned long reg;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
- /*
- WARNING: ASSUMES the following:
- ENG=1
- PRADV0=1
- PRBDV0=1
- */
-
- /* Decode CPR0_PLLD0 for divisors */
- mfcpr(CPR0_PLLD, reg);
- temp = (reg & PLLD_FWDVA_MASK) >> 16;
- sysInfo->pllFwdDivA = temp ? temp : 16;
- temp = (reg & PLLD_FWDVB_MASK) >> 8;
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (reg & PLLD_FBDV_MASK) >> 24;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- lfdiv = reg & PLLD_LFBDV_MASK;
-
- mfcpr(CPR0_OPBD0, reg);
- temp = (reg & OPBDDV_MASK) >> 24;
- sysInfo->pllOpbDiv = temp ? temp : 4;
-
- mfcpr(CPR0_PERD, reg);
- temp = (reg & PERDV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 8;
-
- mfcpr(CPR0_PRIMBD0, reg);
- temp = (reg & PRBDV_MASK) >> 24;
- prbdv0 = temp ? temp : 8;
-
- mfcpr(CPR0_SPCID, reg);
- temp = (reg & SPCID_MASK) >> 24;
- sysInfo->pllPciDiv = temp ? temp : 4;
-
- /* Calculate 'M' based on feedback source */
- mfsdr(SDR0_SDSTP0, reg);
- temp = (reg & PLLSYS0_SEL_MASK) >> 27;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- mfcpr(CPR0_PLLC, reg);
- temp = (reg & PLLC_SRC_MASK) >> 29;
- if (!temp) /* PLLOUTA */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else /* PLLOUTB */
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqPLB/sysInfo->pllExtBusDiv;
- sysInfo->freqPCI = sysInfo->freqPLB/sysInfo->pllPciDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-
- /* Figure which timer source to use */
- if (mfspr(SPRN_CCR1) & 0x0080) {
- /* External Clock, assume same as SYS_CLK */
- temp = sysInfo->freqProcessor / 2; /* Max extern clock speed */
- if (CONFIG_SYS_CLK_FREQ > temp)
- sysInfo->freqTmrClk = temp;
- else
- sysInfo->freqTmrClk = CONFIG_SYS_CLK_FREQ;
- }
- else /* Internal clock */
- sysInfo->freqTmrClk = sysInfo->freqProcessor;
-}
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- sys_info_t sys_info;
- get_sys_info (&sys_info);
- return sys_info.freqPCI;
-}
-
-#elif !defined(CONFIG_440GX) && !defined(CONFIG_440SP) && !defined(CONFIG_440SPE) \
- && !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long temp;
- unsigned long m;
-
- /* Extract configured divisors */
- strp0 = mfdcr( CPC0_STRP0 );
- sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
- sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
- sysInfo->pllFbkDiv = temp ? temp : 16;
- sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
- sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
-
- /* Calculate 'M' based on feedback source */
- if( strp0 & PLLSYS0_EXTSL_MASK )
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
-
- /* Now calculate the individual clocks */
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
- if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
- sysInfo->freqPLB >>= 1;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-#else
-
-#if !defined(CONFIG_XILINX_440)
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long strp0;
- unsigned long strp1;
- unsigned long temp;
- unsigned long temp1;
- unsigned long lfdiv;
- unsigned long m;
- unsigned long prbdv0;
-
-#if defined(CONFIG_YUCCA)
- unsigned long sys_freq;
- unsigned long sys_per=0;
- unsigned long msr;
- unsigned long pci_clock_per;
- unsigned long sdr_ddrpll;
-
- /*-------------------------------------------------------------------------+
- | Get the system clock period.
- +-------------------------------------------------------------------------*/
- sys_per = determine_sysper();
-
- msr = (mfmsr () & ~(MSR_EE)); /* disable interrupts */
-
- /*-------------------------------------------------------------------------+
- | Calculate the system clock speed from the period.
- +-------------------------------------------------------------------------*/
- sys_freq = (ONE_BILLION / sys_per) * 1000;
-#endif
-
- /* Extract configured divisors */
- mfsdr( SDR0_SDSTP0,strp0 );
- mfsdr( SDR0_SDSTP1,strp1 );
-
- temp = ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 8);
- sysInfo->pllFwdDivA = temp ? temp : 16 ;
- temp = ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 5);
- sysInfo->pllFwdDivB = temp ? temp: 8 ;
- temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 12;
- sysInfo->pllFbkDiv = temp ? temp : 32;
- temp = (strp0 & PLLSYS0_OPB_DIV_MASK);
- sysInfo->pllOpbDiv = temp ? temp : 4;
- temp = (strp1 & PLLSYS1_PERCLK_DIV_MASK) >> 24;
- sysInfo->pllExtBusDiv = temp ? temp : 4;
- prbdv0 = (strp0 >> 2) & 0x7;
-
- /* Calculate 'M' based on feedback source */
- temp = (strp0 & PLLSYS0_SEL_MASK) >> 27;
- temp1 = (strp1 & PLLSYS1_LF_DIV_MASK) >> 26;
- lfdiv = temp1 ? temp1 : 64;
- if (temp == 0) { /* PLL output */
- /* Figure which pll to use */
- temp = (strp0 & PLLSYS0_SRC_MASK) >> 30;
- if (!temp)
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivA;
- else
- m = sysInfo->pllFbkDiv * lfdiv * sysInfo->pllFwdDivB;
- }
- else if (temp == 1) /* CPU output */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
- else /* PerClk */
- m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
-
- /* Now calculate the individual clocks */
-#if defined(CONFIG_YUCCA)
- sysInfo->freqVCOMhz = (m * sys_freq) ;
-#else
- sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m >> 1);
-#endif
- sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
- sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB/prbdv0;
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqEBC = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
-
-#if defined(CONFIG_YUCCA)
- /* Determine PCI Clock Period */
- pci_clock_per = determine_pci_clock_per();
- sysInfo->freqPCI = (ONE_BILLION/pci_clock_per) * 1000;
- mfsdr(SDR0_DDR0, sdr_ddrpll);
- sysInfo->freqDDR = ((sysInfo->freqPLB) * SDR0_DDR0_DDRM_DECODE(sdr_ddrpll));
-#endif
-
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-#endif /* CONFIG_XILINX_440 */
-
-#if defined(CONFIG_YUCCA)
-unsigned long determine_sysper(void)
-{
- unsigned int fpga_clocking_reg;
- unsigned int master_clock_selection;
- unsigned long master_clock_per = 0;
- unsigned long fb_div_selection;
- unsigned int vco_div_reg_value;
- unsigned long vco_div_selection;
- unsigned long sys_per = 0;
- int extClkVal;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 0 and reg 1 to get FPGA reg information
- +-------------------------------------------------------------------------*/
- fpga_clocking_reg = in16(FPGA_REG16);
-
-
- /* Determine Master Clock Source Selection */
- master_clock_selection = fpga_clocking_reg & FPGA_REG16_MASTER_CLK_MASK;
-
- switch(master_clock_selection) {
- case FPGA_REG16_MASTER_CLK_66_66:
- master_clock_per = PERIOD_66_66MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_50:
- master_clock_per = PERIOD_50_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_33_33:
- master_clock_per = PERIOD_33_33MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_25:
- master_clock_per = PERIOD_25_00MHZ;
- break;
- case FPGA_REG16_MASTER_CLK_EXT:
- if ((extClkVal==EXTCLK_33_33)
- && (extClkVal==EXTCLK_50)
- && (extClkVal==EXTCLK_66_66)
- && (extClkVal==EXTCLK_83)) {
- /* calculate master clock period from external clock value */
- master_clock_per=(ONE_BILLION/extClkVal) * 1000;
- } else {
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- break;
- default:
- /* Unsupported */
- DEBUGF ("%s[%d] *** master clock selection failed ***\n", __FUNCTION__,__LINE__);
- hang();
- break;
- }
-
- /* Determine FB divisors values */
- if ((fpga_clocking_reg & FPGA_REG16_FB1_DIV_MASK) == FPGA_REG16_FB1_DIV_LOW) {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_6;
- else
- fb_div_selection = FPGA_FB_DIV_12;
- } else {
- if ((fpga_clocking_reg & FPGA_REG16_FB2_DIV_MASK) == FPGA_REG16_FB2_DIV_LOW)
- fb_div_selection = FPGA_FB_DIV_10;
- else
- fb_div_selection = FPGA_FB_DIV_20;
- }
-
- /* Determine VCO divisors values */
- vco_div_reg_value = fpga_clocking_reg & FPGA_REG16_VCO_DIV_MASK;
-
- switch(vco_div_reg_value) {
- case FPGA_REG16_VCO_DIV_4:
- vco_div_selection = FPGA_VCO_DIV_4;
- break;
- case FPGA_REG16_VCO_DIV_6:
- vco_div_selection = FPGA_VCO_DIV_6;
- break;
- case FPGA_REG16_VCO_DIV_8:
- vco_div_selection = FPGA_VCO_DIV_8;
- break;
- case FPGA_REG16_VCO_DIV_10:
- default:
- vco_div_selection = FPGA_VCO_DIV_10;
- break;
- }
-
- if (master_clock_selection == FPGA_REG16_MASTER_CLK_EXT) {
- switch(master_clock_per) {
- case PERIOD_25_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_33_33MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_50_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_33_33MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- break;
- case PERIOD_50_00MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_75_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_75_00MHZ;
- }
- break;
- case PERIOD_66_66MHZ:
- if (fb_div_selection == FPGA_FB_DIV_6) {
- if (vco_div_selection == FPGA_VCO_DIV_4)
- sys_per = PERIOD_100_00MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_6)
- sys_per = PERIOD_66_66MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_50_00MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_10) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_83_33MHZ;
- if (vco_div_selection == FPGA_VCO_DIV_10)
- sys_per = PERIOD_66_66MHZ;
- }
- if (fb_div_selection == FPGA_FB_DIV_12) {
- if (vco_div_selection == FPGA_VCO_DIV_8)
- sys_per = PERIOD_100_00MHZ;
- }
- break;
- default:
- break;
- }
-
- if (sys_per == 0) {
- /* Other combinations are not supported */
- DEBUGF ("%s[%d] *** sys period compute failed ***\n", __FUNCTION__,__LINE__);
- hang();
- }
- } else {
- /* calcul system clock without cheking */
- /* if engineering option clock no check is selected */
- /* sys_per = master_clock_per * vco_div_selection / fb_div_selection */
- sys_per = (master_clock_per/fb_div_selection) * vco_div_selection;
- }
-
- return(sys_per);
-}
-
-/*-------------------------------------------------------------------------+
-| determine_pci_clock_per.
-+-------------------------------------------------------------------------*/
-unsigned long determine_pci_clock_per(void)
-{
- unsigned long pci_clock_selection, pci_period;
-
- /*-------------------------------------------------------------------------+
- | Read FPGA reg 6 to get PCI 0 FPGA reg information
- +-------------------------------------------------------------------------*/
- pci_clock_selection = in16(FPGA_REG16); /* was reg6 averifier */
-
-
- pci_clock_selection = pci_clock_selection & FPGA_REG16_PCI0_CLK_MASK;
-
- switch (pci_clock_selection) {
- case FPGA_REG16_PCI0_CLK_133_33:
- pci_period = PERIOD_133_33MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_100:
- pci_period = PERIOD_100_00MHZ;
- break;
- case FPGA_REG16_PCI0_CLK_66_66:
- pci_period = PERIOD_66_66MHZ;
- break;
- default:
- pci_period = PERIOD_33_33MHZ;;
- break;
- }
-
- return(pci_period);
-}
-#endif
-
-#elif defined(CONFIG_XILINX_405)
-extern void get_sys_info (sys_info_t * sysInfo);
-extern ulong get_PCI_freq (void);
-
-#elif defined(CONFIG_AP1000)
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqProcessor = 240 * 1000 * 1000;
- sysInfo->freqPLB = 80 * 1000 * 1000;
- sysInfo->freqPCI = 33 * 1000 * 1000;
-}
-
-#elif defined(CONFIG_405)
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- sysInfo->freqVCOMhz=3125000;
- sysInfo->freqProcessor=12*1000*1000;
- sysInfo->freqPLB=50*1000*1000;
- sysInfo->freqPCI=66*1000*1000;
-}
-
-#elif defined(CONFIG_405EP)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long pllmr0;
- unsigned long pllmr1;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m;
- unsigned long pllmr0_ccdv;
-
- /*
- * Read PLL Mode registers
- */
- pllmr0 = mfdcr (CPC0_PLLMR0);
- pllmr1 = mfdcr (CPC0_PLLMR1);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = 8 - ((pllmr1 & PLLMR1_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B (should be equal to A)
- */
- sysInfo->pllFwdDivB = 8 - ((pllmr1 & PLLMR1_FWDVB_MASK) >> 12);
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((pllmr1 & PLLMR1_FBMUL_MASK) >> 20);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 16;
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((pllmr0 & PLLMR0_CPU_TO_PLB_MASK) >> 16) + 1;
-
- /*
- * Determine PCI_DIV.
- */
- sysInfo->pllPciDiv = (pllmr0 & PLLMR0_PCI_TO_PLB_MASK) + 1;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = ((pllmr0 & PLLMR0_EXB_TO_PLB_MASK) >> 8) + 2;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((pllmr0 & PLLMR0_OPB_TO_PLB_MASK) >> 12) + 1;
-
- /*
- * Determine the M factor
- */
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- pllmr0_ccdv = ((pllmr0 & PLLMR0_CPU_DIV_MASK) >> 20) + 1;
- if (pllmr1 & PLLMR1_SSCS_MASK) {
- /*
- * This is true if FWDVA == FWDVB:
- * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv)
- * / pllmr0_ccdv;
- */
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB)
- / sysInfo->pllFwdDiv / pllmr0_ccdv;
- } else {
- sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv;
- }
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = sysInfo->freqProcessor / sysInfo->pllPlbDiv;
-
- sysInfo->freqEBC = sysInfo->freqPLB / sysInfo->pllExtBusDiv;
-
- sysInfo->freqOPB = sysInfo->freqPLB / sysInfo->pllOpbDiv;
-
- sysInfo->freqUART = sysInfo->freqProcessor * pllmr0_ccdv;
-}
-
-
-/********************************************
- * get_PCI_freq
- * return PCI bus freq in Hz
- *********************************************/
-ulong get_PCI_freq (void)
-{
- ulong val;
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB / sys_info.pllPciDiv;
- return val;
-}
-
-#elif defined(CONFIG_405EZ)
-void get_sys_info (PPC4xx_SYS_INFO * sysInfo)
-{
- unsigned long cpr_plld;
- unsigned long cpr_pllc;
- unsigned long cpr_primad;
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
- unsigned long primad_cpudv;
- unsigned long m;
- unsigned long plloutb;
-
- /*
- * Read PLL Mode registers
- */
- mfcpr(CPR0_PLLD, cpr_plld);
- mfcpr(CPR0_PLLC, cpr_pllc);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
-
- /*
- * Determine forward divider B
- */
- sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
- if (sysInfo->pllFwdDivB == 0)
- sysInfo->pllFwdDivB = 8;
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
- if (sysInfo->pllFbkDiv == 0)
- sysInfo->pllFbkDiv = 256;
-
- /*
- * Read CPR_PRIMAD register
- */
- mfcpr(CPC0_PRIMAD, cpr_primad);
-
- /*
- * Determine PLB_DIV.
- */
- sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
- if (sysInfo->pllPlbDiv == 0)
- sysInfo->pllPlbDiv = 16;
-
- /*
- * Determine EXTBUS_DIV.
- */
- sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
- if (sysInfo->pllExtBusDiv == 0)
- sysInfo->pllExtBusDiv = 16;
-
- /*
- * Determine OPB_DIV.
- */
- sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
- if (sysInfo->pllOpbDiv == 0)
- sysInfo->pllOpbDiv = 16;
-
- /*
- * Determine the M factor
- */
- if (cpr_pllc & PLLC_SRC_MASK)
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
- else
- m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
- if (primad_cpudv == 0)
- primad_cpudv = 16;
-
- sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / primad_cpudv;
-
- /*
- * Determine PLB clock frequency
- */
- sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
- sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
-
- sysInfo->freqOPB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllOpbDiv;
-
- sysInfo->freqEBC = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) /
- sysInfo->pllExtBusDiv;
-
- plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
- sysInfo->pllFwdDivB : sysInfo->pllFwdDiv) * sysInfo->pllFbkDiv) /
- sysInfo->pllFwdDivB);
- sysInfo->freqUART = plloutb;
-}
-
-#elif defined(CONFIG_405EX)
-
-/*
- * TODO: We need to get the CPR registers and calculate these values correctly!!!!
- * We need the specs!!!!
- */
-static unsigned char get_fbdv(unsigned char index)
-{
- unsigned char ret = 0;
- /* This is table should be 256 bytes.
- * Only take first 52 values.
- */
- unsigned char fbdv_tb[] = {
- 0x00, 0xff, 0x7f, 0xfd,
- 0x7a, 0xf5, 0x6a, 0xd5,
- 0x2a, 0xd4, 0x29, 0xd3,
- 0x26, 0xcc, 0x19, 0xb3,
- 0x67, 0xce, 0x1d, 0xbb,
- 0x77, 0xee, 0x5d, 0xba,
- 0x74, 0xe9, 0x52, 0xa5,
- 0x4b, 0x96, 0x2c, 0xd8,
- 0x31, 0xe3, 0x46, 0x8d,
- 0x1b, 0xb7, 0x6f, 0xde,
- 0x3d, 0xfb, 0x76, 0xed,
- 0x5a, 0xb5, 0x6b, 0xd6,
- 0x2d, 0xdb, 0x36, 0xec,
-
- };
-
- if ((index & 0x7f) == 0)
- return 1;
- while (ret < sizeof (fbdv_tb)) {
- if (fbdv_tb[ret] == index)
- break;
- ret++;
- }
- ret++;
-
- return ret;
-}
-
-#define PLL_FBK_PLL_LOCAL 0
-#define PLL_FBK_CPU 1
-#define PLL_FBK_PERCLK 5
-
-void get_sys_info (sys_info_t * sysInfo)
-{
- unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
- unsigned long m = 1;
- unsigned int tmp;
- unsigned char fwdva[16] = {
- 1, 2, 14, 9, 4, 11, 16, 13,
- 12, 5, 6, 15, 10, 7, 8, 3,
- };
- unsigned char sel, cpudv0, plb2xDiv;
-
- mfcpr(CPR0_PLLD, tmp);
-
- /*
- * Determine forward divider A
- */
- sysInfo->pllFwdDiv = fwdva[((tmp >> 16) & 0x0f)]; /* FWDVA */
-
- /*
- * Determine FBK_DIV.
- */
- sysInfo->pllFbkDiv = get_fbdv(((tmp >> 24) & 0x0ff)); /* FBDV */
-
- /*
- * Determine PLBDV0
- */
- sysInfo->pllPlbDiv = 2;
-
- /*
- * Determine PERDV0
- */
- mfcpr(CPR0_PERD, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllExtBusDiv = (tmp == 0) ? 4 : tmp;
-
- /*
- * Determine OPBDV0
- */
- mfcpr(CPR0_OPBD0, tmp);
- tmp = (tmp >> 24) & 0x03;
- sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp;
-
- /* Determine PLB2XDV0 */
- mfcpr(CPR0_PLBD, tmp);
- tmp = (tmp >> 16) & 0x07;
- plb2xDiv = (tmp == 0) ? 8 : tmp;
-
- /* Determine CPUDV0 */
- mfcpr(CPR0_CPUD, tmp);
- tmp = (tmp >> 24) & 0x07;
- cpudv0 = (tmp == 0) ? 8 : tmp;
-
- /* Determine SEL(5:7) in CPR0_PLLC */
- mfcpr(CPR0_PLLC, tmp);
- sel = (tmp >> 24) & 0x07;
-
- /*
- * Determine the M factor
- * PLL local: M = FBDV
- * CPU clock: M = FBDV * FWDVA * CPUDV0
- * PerClk : M = FBDV * FWDVA * PLB2XDV0 * PLBDV0(2) * OPBDV0 * PERDV0
- *
- */
- switch (sel) {
- case PLL_FBK_CPU:
- m = sysInfo->pllFwdDiv * cpudv0;
- break;
- case PLL_FBK_PERCLK:
- m = sysInfo->pllFwdDiv * plb2xDiv * 2
- * sysInfo->pllOpbDiv * sysInfo->pllExtBusDiv;
- break;
- case PLL_FBK_PLL_LOCAL:
- break;
- default:
- printf("%s unknown m\n", __FUNCTION__);
- return;
-
- }
- m *= sysInfo->pllFbkDiv;
-
- /*
- * Determine VCO clock frequency
- */
- sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
- (unsigned long long)sysClkPeriodPs;
-
- /*
- * Determine CPU clock frequency
- */
- sysInfo->freqProcessor = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * cpudv0);
-
- /*
- * Determine PLB clock frequency, ddr1x should be the same
- */
- sysInfo->freqPLB = sysInfo->freqVCOHz / (sysInfo->pllFwdDiv * plb2xDiv * 2);
- sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
- sysInfo->freqDDR = sysInfo->freqPLB;
- sysInfo->freqEBC = sysInfo->freqOPB / sysInfo->pllExtBusDiv;
- sysInfo->freqUART = sysInfo->freqPLB;
-}
-
-#endif
-
-int get_clocks (void)
-{
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- gd->cpu_clk = sys_info.freqProcessor;
- gd->bus_clk = sys_info.freqPLB;
-
-#endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
-
-#ifdef CONFIG_IOP480
- gd->cpu_clk = 66000000;
- gd->bus_clk = 66000000;
-#endif
- return (0);
-}
-
-
-/********************************************
- * get_bus_freq
- * return PLB bus freq in Hz
- *********************************************/
-ulong get_bus_freq (ulong dummy)
-{
- ulong val;
-
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405) || \
- defined(CONFIG_440)
- sys_info_t sys_info;
-
- get_sys_info (&sys_info);
- val = sys_info.freqPLB;
-
-#elif defined(CONFIG_IOP480)
-
- val = 66;
-
-#else
-# error get_bus_freq() not implemented
-#endif
-
- return val;
-}
-
-#if !defined(CONFIG_IOP480)
-ulong get_OPB_freq (void)
-{
- PPC4xx_SYS_INFO sys_info;
-
- get_sys_info (&sys_info);
-
- return sys_info.freqOPB;
-}
-#endif
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
deleted file mode 100644
index 927c88c..0000000
--- a/cpu/ppc4xx/start.S
+++ /dev/null
@@ -1,2170 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*------------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------
- */
-
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <ppc4xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx-isram.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
-# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
-# define PBxAP PB1AP
-# define PBxCR PB0CR
-# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
-# define PBxAP PB1AP
-# define PBxCR PB1CR
-# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
-# define PBxAP PB2AP
-# define PBxCR PB2CR
-# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
-# define PBxAP PB3AP
-# define PBxCR PB3CR
-# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
-# define PBxAP PB4AP
-# define PBxCR PB4CR
-# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
-# define PBxAP PB5AP
-# define PBxCR PB5CR
-# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
-# define PBxAP PB6AP
-# define PBxCR PB6CR
-# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
-# define PBxAP PB7AP
-# define PBxCR PB7CR
-# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
-# endif
-# endif
-# ifndef PBxAP_VAL
-# define PBxAP_VAL 0
-# endif
-# ifndef PBxCR_VAL
-# define PBxCR_VAL 0
-# endif
-/*
- * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
- * used as temporary stack pointer for the primordial stack
- */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
-# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(7) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(0) | \
- EBC_BXAP_WBN_ENCODE(0) | \
- EBC_BXAP_WBF_ENCODE(0) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
-# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
- EBC_BXCR_BS_64MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
-# ifndef CONFIG_SYS_INIT_RAM_PATTERN
-# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
-# endif
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
-#endif
-
-/*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
- */
-#if !defined(CONFIG_SYS_FLASH_BASE)
-/* If not already defined, set it to the "last" 128MByte region */
-# define CONFIG_SYS_FLASH_BASE 0xf8000000
-#endif
-#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
-# define CONFIG_SYS_ICACHE_SACR_VALUE \
- (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
-#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
-
-#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
-# define CONFIG_SYS_DCACHE_SACR_VALUE \
- (0x00000000)
-#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
-
-#define function_prolog(func_name) .text; \
- .align 2; \
- .globl func_name; \
- func_name:
-#define function_epilog(func_name) .type func_name,@function; \
- .size func_name,.-func_name
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-
- .extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
- .extern reconfig_tlb0
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-#if !defined(CONFIG_NAND_SPL)
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-#endif /* CONFIG_NAND_SPL */
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*
- * NAND U-Boot image is started from offset 0
- */
- .text
-#if defined(CONFIG_440)
- bl reconfig_tlb0
-#endif
- GET_GOT
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
- /*
- * 4xx RAM-booting U-Boot image is started from offset 0
- */
- .text
- bl _start_440
-#endif
-
-/*
- * 440 Startup -- on reset only the top 4k of the effective
- * address space is mapped in by an entry in the instruction
- * and data shadow TLB. The .bootpg section is located in the
- * top 4k & does only what's necessary to map in the the rest
- * of the boot rom. Once the boot rom is mapped in we can
- * proceed with normal startup.
- *
- * NOTE: CS0 only covers the top 2MB of the effective address
- * space after reset.
- */
-
-#if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
- .section .bootpg,"ax"
-#endif
- .globl _start_440
-
-/**************************************************************************/
-_start_440:
- /*--------------------------------------------------------------------+
- | 440EPX BUP Change - Hardware team request
- +--------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- sync
- nop
- nop
-#endif
- /*----------------------------------------------------------------+
- | Core bug fix. Clear the esr
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_ESR,r0
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- iccci r0,r0 /* NOTE: operands not used for 440 */
- dccci r0,r0 /* NOTE: operands not used for 440 */
- sync
- li r0,0
- mtspr SPRN_SRR0,r0
- mtspr SPRN_SRR1,r0
- mtspr SPRN_CSRR0,r0
- mtspr SPRN_CSRR1,r0
- /* NOTE: 440GX adds machine check status regs */
-#if defined(CONFIG_440) && !defined(CONFIG_440GP)
- mtspr SPRN_MCSRR0,r0
- mtspr SPRN_MCSRR1,r0
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#endif
-
- /*----------------------------------------------------------------*/
- /* CCR0 init */
- /*----------------------------------------------------------------*/
- /* Disable store gathering & broadcast, guarantee inst/data
- * cache block touch, force load/store alignment
- * (see errata 1.12: 440_33)
- */
- lis r1,0x0030 /* store gathering & broadcast disable */
- ori r1,r1,0x6000 /* cache touch */
- mtspr SPRN_CCR0,r1
-
- /*----------------------------------------------------------------*/
- /* Initialize debug */
- /*----------------------------------------------------------------*/
- mfspr r1,SPRN_DBCR0
- andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
- bne skip_debug_init /* if set, don't clear debug register */
- mtspr SPRN_DBCR0,r0
- mtspr SPRN_DBCR1,r0
- mtspr SPRN_DBCR2,r0
- mtspr SPRN_IAC1,r0
- mtspr SPRN_IAC2,r0
- mtspr SPRN_IAC3,r0
- mtspr SPRN_DAC1,r0
- mtspr SPRN_DAC2,r0
- mtspr SPRN_DVC1,r0
- mtspr SPRN_DVC2,r0
-
- mfspr r1,SPRN_DBSR
- mtspr SPRN_DBSR,r1 /* Clear all valid bits */
-skip_debug_init:
-
-#if defined (CONFIG_440SPE)
- /*----------------------------------------------------------------+
- | Initialize Core Configuration Reg1.
- | a. ICDPEI: Record even parity. Normal operation.
- | b. ICTPEI: Record even parity. Normal operation.
- | c. DCTPEI: Record even parity. Normal operation.
- | d. DCDPEI: Record even parity. Normal operation.
- | e. DCUPEI: Record even parity. Normal operation.
- | f. DCMPEI: Record even parity. Normal operation.
- | g. FCOM: Normal operation
- | h. MMUPEI: Record even parity. Normal operation.
- | i. FFF: Flush only as much data as necessary.
- | j. TCS: Timebase increments from CPU clock.
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_CCR1, r0
-
- /*----------------------------------------------------------------+
- | Reset the timebase.
- | The previous write to CCR1 sets the timebase source.
- +-----------------------------------------------------------------*/
- mtspr SPRN_TBWL, r0
- mtspr SPRN_TBWU, r0
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup interrupt vectors */
- /*----------------------------------------------------------------*/
- mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
- li r1,0x0100
- mtspr SPRN_IVOR0,r1 /* Critical input */
- li r1,0x0200
- mtspr SPRN_IVOR1,r1 /* Machine check */
- li r1,0x0300
- mtspr SPRN_IVOR2,r1 /* Data storage */
- li r1,0x0400
- mtspr SPRN_IVOR3,r1 /* Instruction storage */
- li r1,0x0500
- mtspr SPRN_IVOR4,r1 /* External interrupt */
- li r1,0x0600
- mtspr SPRN_IVOR5,r1 /* Alignment */
- li r1,0x0700
- mtspr SPRN_IVOR6,r1 /* Program check */
- li r1,0x0800
- mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
- li r1,0x0c00
- mtspr SPRN_IVOR8,r1 /* System call */
- li r1,0x0a00
- mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
- li r1,0x0900
- mtspr SPRN_IVOR10,r1 /* Decrementer */
- li r1,0x1300
- mtspr SPRN_IVOR13,r1 /* Data TLB error */
- li r1,0x1400
- mtspr SPRN_IVOR14,r1 /* Instr TLB error */
- li r1,0x2000
- mtspr SPRN_IVOR15,r1 /* Debug */
-
- /*----------------------------------------------------------------*/
- /* Configure cache regions */
- /*----------------------------------------------------------------*/
- mtspr SPRN_INV0,r0
- mtspr SPRN_INV1,r0
- mtspr SPRN_INV2,r0
- mtspr SPRN_INV3,r0
- mtspr SPRN_DNV0,r0
- mtspr SPRN_DNV1,r0
- mtspr SPRN_DNV2,r0
- mtspr SPRN_DNV3,r0
- mtspr SPRN_ITV0,r0
- mtspr SPRN_ITV1,r0
- mtspr SPRN_ITV2,r0
- mtspr SPRN_ITV3,r0
- mtspr SPRN_DTV0,r0
- mtspr SPRN_DTV1,r0
- mtspr SPRN_DTV2,r0
- mtspr SPRN_DTV3,r0
-
- /*----------------------------------------------------------------*/
- /* Cache victim limits */
- /*----------------------------------------------------------------*/
- /* floors 0, ceiling max to use the entire cache -- nothing locked
- */
- lis r1,0x0001
- ori r1,r1,0xf800
- mtspr SPRN_IVLIM,r1
- mtspr SPRN_DVLIM,r1
-
- /*----------------------------------------------------------------+
- |Initialize MMUCR[STID] = 0.
- +-----------------------------------------------------------------*/
- mfspr r0,SPRN_MMUCR
- addis r1,0,0xFFFF
- ori r1,r1,0xFF00
- and r0,r0,r1
- mtspr SPRN_MMUCR,r0
-
- /*----------------------------------------------------------------*/
- /* Clear all TLB entries -- TID = 0, TS = 0 */
- /*----------------------------------------------------------------*/
- addis r0,0,0x0000
-#ifdef CONFIG_SYS_RAMBOOT
- li r4,0 /* Start with TLB #0 */
-#else
- li r4,1 /* Start with TLB #1 */
-#endif
- li r1,64 /* 64 TLB entries */
- sub r1,r1,r4 /* calculate last TLB # */
- mtctr r1
-rsttlb:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
- rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
- beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
-#endif
- tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
- tlbwe r0,r4,1
- tlbwe r0,r4,2
-tlbnxt: addi r4,r4,1 /* Next TLB */
- bdnz rsttlb
-
- /*----------------------------------------------------------------*/
- /* TLB entry setup -- step thru tlbtab */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
- /*----------------------------------------------------------------*/
- /* We have different TLB tables for revA and rev B of 440SPe */
- /*----------------------------------------------------------------*/
- mfspr r1, PVR
- lis r0,0x5342
- ori r0,r0,0x1891
- cmpw r7,r1,r0
- bne r7,..revA
- bl tlbtabB
- b ..goon
-..revA:
- bl tlbtabA
-..goon:
-#else
- bl tlbtab /* Get tlbtab pointer */
-#endif
- mr r5,r0
- li r1,0x003f /* 64 TLB entries max */
- mtctr r1
- li r4,0 /* TLB # */
-
- addi r5,r5,-4
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 */
- rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
- bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
-#endif
- lwzu r0,4(r5)
- cmpwi r0,0
- beq 2f /* 0 marks end */
- lwzu r1,4(r5)
- lwzu r2,4(r5)
- tlbwe r0,r4,0 /* TLB Word 0 */
- tlbwe r1,r4,1 /* TLB Word 1 */
- tlbwe r2,r4,2 /* TLB Word 2 */
-tlbnx2: addi r4,r4,1 /* Next TLB */
- bdnz 1b
-
- /*----------------------------------------------------------------*/
- /* Continue from 'normal' start */
- /*----------------------------------------------------------------*/
-2:
- bl 3f
- b _start
-
-3: li r0,0
- mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
- mflr r1
- mtspr SPRN_SRR0,r1
- rfi
-#endif /* CONFIG_440 */
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-#ifndef CONFIG_NAND_SPL
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
-
-#ifdef CONFIG_440
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#else
- CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#endif /* CONFIG_440 */
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
- STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
- STD_EXCEPTION(0xa00, APU, UnknownException)
-#endif
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
-#else
- STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-#endif
- CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
- . = _START_OFFSET
-#endif
- .globl _start
-_start:
-
-/*****************************************************************************/
-#if defined(CONFIG_440)
-
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- li r0,0x0000
- lis r1,0xffff
- mtspr SPRN_DEC,r0 /* prevent dec exceptions */
- mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
- mtspr SPRN_TBWU,r0
- mtspr SPRN_TSR,r1 /* clear all timer exception status */
- mtspr SPRN_TCR,r0 /* disable all */
- mtspr SPRN_ESR,r0 /* clear exception syndrome register */
- mtxer r0 /* clear integer exception register */
-
- /*----------------------------------------------------------------*/
- /* Debug setup -- some (not very good) ice's need an event*/
- /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
- /* value you need in this case 0x8cff 0000 should do the trick */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr SPRN_DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr SPRN_DBCR0,r0
- isync
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup the internal SRAM */
- /*----------------------------------------------------------------*/
- li r0,0
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /* Clear Dcache to use as RAM */
- addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
- ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ran
- addi r5,r5,0x0001
-..d_ran:
- mtctr r5
-..d_ag:
- dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag
-
- /*
- * Lock the init-ram/stack in d-cache, so that other regions
- * may use d-cache as well
- * Note, that this current implementation locks exactly 4k
- * of d-cache, so please make sure that you don't define a
- * bigger init-ram area. Take a look at the lwmon5 440EPx
- * implementation as a reference.
- */
- msync
- isync
- /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
- lis r1,0x0201
- ori r1,r1,0xf808
- mtspr SPRN_DVLIM,r1
- lis r1,0x0808
- ori r1,r1,0x0808
- mtspr SPRN_DNV0,r1
- mtspr SPRN_DNV1,r1
- mtspr SPRN_DNV2,r1
- mtspr SPRN_DNV3,r1
- mtspr SPRN_DTV0,r1
- mtspr SPRN_DTV1,r1
- mtspr SPRN_DTV2,r1
- mtspr SPRN_DTV3,r1
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
- /* 440EP & 440GR are only 440er PPC's without internal SRAM */
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
- /* not all PPC's have internal SRAM usable as L2-cache */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460SX)
- mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1, 0x0000
- ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
- mtdcr L2_CACHE_CFG,r1
-#endif
-
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM0_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM0_DPC,r1
- mfdcr r1,ISRAM0_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM0_PMEG,r1
-
- lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
- ori r1,r1,0x0980 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x8001
- ori r1,r1,0x0980 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x8002
- ori r1,r1, 0x0980 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x8003
- ori r1,r1, 0x0980 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1,0x0000 /* BAS = X_0000_0000 */
- ori r1,r1,0x0984 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0984 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0984 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0984 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM1_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM1_DPC,r1
- mfdcr r1,ISRAM1_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM1_PMEG,r1
-
- lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
- mtdcr ISRAM1_SB0CR,r1
-#endif
-#elif defined(CONFIG_460SX)
- lis r1,0x0000 /* BAS = 0000_0000 */
- ori r1,r1,0x0B84 /* first 128k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0B84 /* second 128k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0B84 /* third 128k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0B84 /* fourth 128k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440GP)
- ori r1,r1,0x0380 /* 8k rw */
- mtdcr ISRAM0_SB0CR,r1
- mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
-#endif
-#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
-
- /*----------------------------------------------------------------*/
- /* Setup the stack in internal SRAM */
- /*----------------------------------------------------------------*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0, RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#endif /* CONFIG_440 */
-
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405)
- /*----------------------------------------------------------------------- */
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------------- */
- addi r4,r0,0x0000
-#if !defined(CONFIG_405EX)
- mtspr SPRN_SGR,r4
-#else
- /*
- * On 405EX, completely clearing the SGR leads to PPC hangup
- * upon PCIe configuration access. The PCIe memory regions
- * need to be guarded!
- */
- lis r3,0x0000
- ori r3,r3,0x7FFC
- mtspr SPRN_SGR,r3
-#endif
- mtspr SPRN_DCWR,r4
- mtesr r4 /* clear Exception Syndrome Reg */
- mttcr r4 /* clear Timer Control Reg */
- mtxer r4 /* clear Fixed-Point Exception Reg */
- mtevpr r4 /* clear Exception Vector Prefix Reg */
- addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
- /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
-
- /* Invalidate the i- and d-caches. */
- bl invalidate_icache
- bl invalidate_dcache
-
- /* Set-up icache cacheability. */
- lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r4
- isync
-
- /* Set-up dcache cacheability. */
- lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r4
-
-#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
- && !defined (CONFIG_XILINX_405)
- /*----------------------------------------------------------------------- */
- /* Tune the speed and size for flash CS0 */
- /*----------------------------------------------------------------------- */
- bl ext_bus_cntlr_init
-#endif
-
-#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
- /*
- * For boards that don't have OCM and can't use the data cache
- * for their primordial stack, setup stack here directly after the
- * SDRAM is initialized in ext_bus_cntlr_init.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
-
-#if defined(CONFIG_405EP)
- /*----------------------------------------------------------------------- */
- /* DMA Status, clear to come up clean */
- /*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
- ori r3,r3, 0xFFFF
- mtdcr DMASR, r3
-
- bl ppc405ep_init /* do ppc405ep specific init */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
-#if defined(CONFIG_405EZ)
- /********************************************************************
- * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
- *******************************************************************/
- /*
- * We can map the OCM on the PLB3, so map it at
- * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
- */
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_DSRC1, r3 /* Set Data Side */
- mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_DSRC2, r3 /* Set Data Side */
- mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
- addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
- mtdcr OCM0_DISDPC,r3
-
- isync
-#else /* CONFIG_405EZ */
- /********************************************************************
- * Setup OCM - On Chip Memory
- *******************************************************************/
- /* Setup OCM */
- lis r0, 0x7FFF
- ori r0, r0, 0xFFFF
- mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
- mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
- and r3, r3, r0 /* disable data-side IRAM */
- and r4, r4, r0 /* disable data-side IRAM */
- mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
- mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- mtdcr OCM0_DSARC, r3
- addis r4, 0, 0xC000 /* OCM data area enabled */
- mtdcr OCM0_DSCNTL, r4
- isync
-#endif /* CONFIG_405EZ */
-#endif
-
- /*----------------------------------------------------------------------- */
- /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
- /*----------------------------------------------------------------------- */
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
- li r4, PBxAP
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
- mtdcr EBC0_CFGDATA, r4
-
- addi r4, 0, PBxCR
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
- mtdcr EBC0_CFGDATA, r4
-
- /*
- * Enable the data cache for the 128MB storage access control region
- * at CONFIG_SYS_INIT_RAM_ADDR.
- */
- mfdccr r4
- oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- mtdccr r4
-
- /*
- * Preallocate data cache lines to be used to avoid a subsequent
- * cache miss and an ensuing machine check exception when exceptions
- * are enabled.
- */
- li r0, 0
-
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
-
- /*
- * Convert the size, in bytes, to the number of cache lines/blocks
- * to preallocate.
- */
- clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
- srwi r5, r4, L1_CACHE_SHIFT
- beq ..load_counter
- addi r5, r5, 0x0001
-..load_counter:
- mtctr r5
-
- /* Preallocate the computed number of cache blocks. */
-..alloc_dcache_block:
- dcba r0, r3
- addi r3, r3, L1_CACHE_BYTES
- bdnz ..alloc_dcache_block
- sync
-
- /*
- * Load the initial stack pointer and data area and convert the size,
- * in bytes, to the number of words to initialize to a known value.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
-
- lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
- ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
- mtctr r4
-
- lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
-
- lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
-
-..stackloop:
- stwu r4, -4(r2)
- bdnz ..stackloop
-
- /*
- * Make room for stack frame header and clear final stack frame so
- * that stack backtraces terminate cleanly.
- */
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-
-#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
- (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
- /*
- * Stack in OCM.
- */
-
- /* Set up Stack at top of OCM */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
-
- /* Set up a zeroized stack frame so that backtrace works right */
- li r0, 0
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT /* initialize GOT access */
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- /* NEVER RETURNS! */
- bl board_init_f /* run first part of init code (from Flash) */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
- /*----------------------------------------------------------------------- */
-
-
-#ifndef CONFIG_NAND_SPL
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-#ifdef CONFIG_440
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-#endif /* CONFIG_440 */
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = Relocated stack pointer
- * r4 = Relocated global data pointer
- * r5 = Relocated text pointer
- */
- .globl relocate_code
-relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
- */
-
- /* Save registers */
- mr r9, r3
- mr r10, r4
- mr r11, r5
-
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
- bl flush_dcache_range
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * Undo the earlier data cache set-up for the primordial stack and
- * data area. First, invalidate the data cache and then disable data
- * cacheability for that area. Finally, restore the EBC values, if
- * any.
- */
-
- /* Invalidate the primordial stack and data area in cache */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
- add r4, r4, r3
-
- bl invalidate_dcache_range
-
- /* Disable cacheability for the region */
- mfdccr r3
- lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- and r3, r3, r4
- mtdccr r3
-
- /* Restore the EBC parameters */
- li r3, PBxAP
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxAP_VAL@h
- ori r3, r3, PBxAP_VAL@l
- mtdcr EBC0_CFGDATA, r3
-
- li r3, PBxCR
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxCR_VAL@h
- ori r3, r3, PBxCR_VAL@l
- mtdcr EBC0_CFGDATA, r3
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
- /* Restore registers */
- mr r3, r9
- mr r4, r10
- mr r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /*
- * Unlock the previously locked d-cache
- */
- msync
- isync
- /* set TFLOOR/NFLOOR to 0 again */
- lis r6,0x0001
- ori r6,r6,0xf800
- mtspr SPRN_DVLIM,r6
- lis r6,0x0000
- ori r6,r6,0x0000
- mtspr SPRN_DNV0,r6
- mtspr SPRN_DNV1,r6
- mtspr SPRN_DNV2,r6
- mtspr SPRN_DNV3,r6
- mtspr SPRN_DTV0,r6
- mtspr SPRN_DTV1,r6
- mtspr SPRN_DTV2,r6
- mtspr SPRN_DTV3,r6
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
- * to speed up the boot process. Now this cache needs to be disabled.
- */
- iccci 0,0 /* Invalidate inst cache */
- dccci 0,0 /* Invalidate data cache, now no longer our stack */
- sync
- isync
-
- /* Clear all potential pending exceptions */
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
- addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
-#else
- addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
- tlbre r0,r1,0x0002 /* Read contents */
- ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
- tlbwe r0,r1,0x0002 /* Save it out */
- sync
- isync
-#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Init Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, L1_CACHE_BYTES /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 7f
-
- li r0, 0
-
- andi. r5, r4, 3
- beq 6f
- sub r4, r4, r5
- mtctr r5
- mr r5, r4
-5: stb r0, 0(r5)
- addi r5, r5, 1
- bdnz 5b
-6:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 6b
-
-7:
- mr r3, r9 /* Init Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start_of_vectors)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + _START_OFFSET
- li r8, Alignment - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
-
-#ifdef CONFIG_440
- li r7, .L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_APU - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBError - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBError - _start + _START_OFFSET
- bl trap_reloc
-#else /* CONFIG_440 */
- li r7, .L_PIT - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-#endif /* CONFIG_440 */
-
- li r7, .L_DebugBreakpoint - _start + _START_OFFSET
- bl trap_reloc
-
-#if !defined(CONFIG_440)
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtmsr r7 /* change MSR */
-#else
- bl __440_msr_set
- b __440_msr_continue
-
-__440_msr_set:
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtspr SPRN_SRR1,r7
- mflr r7
- mtspr SPRN_SRR0,r7
- rfi
-__440_msr_continue:
-#endif
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| dcbz_area.
-+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
-#endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/**************************************************************************/
-/* PPC405EP specific stuff */
-/**************************************************************************/
-#ifdef CONFIG_405EP
-ppc405ep_init:
-
-#ifdef CONFIG_BUBINGA
- /*
- * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
- * function) to support FPGA and NVRAM accesses below.
- */
-
- lis r3,GPIO0_OSRH@h /* config GPIO output select */
- ori r3,r3,GPIO0_OSRH@l
- lis r4,CONFIG_SYS_GPIO0_OSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_OSRL@h
- ori r3,r3,GPIO0_OSRL@l
- lis r4,CONFIG_SYS_GPIO0_OSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_ISR1H@h /* config GPIO input select */
- ori r3,r3,GPIO0_ISR1H@l
- lis r4,CONFIG_SYS_GPIO0_ISR1H@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
- stw r4,0(r3)
- lis r3,GPIO0_ISR1L@h
- ori r3,r3,GPIO0_ISR1L@l
- lis r4,CONFIG_SYS_GPIO0_ISR1L@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
- ori r3,r3,GPIO0_TSRH@l
- lis r4,CONFIG_SYS_GPIO0_TSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_TSRL@h
- ori r3,r3,GPIO0_TSRL@l
- lis r4,CONFIG_SYS_GPIO0_TSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
- ori r3,r3,GPIO0_TCR@l
- lis r4,CONFIG_SYS_GPIO0_TCR@h
- ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
- stw r4,0(r3)
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB4AP /* program EBC bank 4 for FPGA access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB4CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
- mtdcr EBC0_CFGDATA,r3
-#endif
-
- /*
- !-----------------------------------------------------------------------
- ! Check to see if chip is in bypass mode.
- ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
- ! CPU reset Otherwise, skip this step and keep going.
- ! Note: Running BIOS in bypass mode is not supported since PLB speed
- ! will not be fast enough for the SDRAM (min 66MHz)
- !-----------------------------------------------------------------------
- */
- mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r4,0x1
-
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
-
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Read NVRAM to get value to write in PLLMR.
- ! If value has not been correctly saved, write default value
- ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
- ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
- !
- ! WARNING: This code assumes the first three words in the nvram_t
- ! structure in openbios.h. Changing the beginning of
- ! the structure will break this code.
- !
- !-----------------------------------------------------------------------
- */
- addis r3,0,NVRAM_BASE@h
- addi r3,r3,NVRAM_BASE@l
-
- lwz r4, 0(r3)
- addis r5,0,NVRVFY1@h
- addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
- bne ..no_pllset
- addi r3,r3,4
- lwz r4, 0(r3)
- addis r5,0,NVRVFY2@h
- addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
- bne ..no_pllset
- addi r3,r3,8 /* Skip over conf_size */
- lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
- lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
- rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r5,1 /* See if PLL is locked */
- beq pll_write
-..no_pllset:
-#endif /* CONFIG_BUBINGA */
-
-#ifdef CONFIG_TAIHU
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- addis r5,0,CPLD_REG0_ADDR@h
- ori r5,r5,CPLD_REG0_ADDR@l
- andi. r5, r5, 0x10
- bne _pci_66mhz
-#endif /* CONFIG_TAIHU */
-
-#if defined(CONFIG_ZEUS)
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- lis r3,0x0000
- addi r3,r3,0x3030
- lis r4,0x8042
- addi r4,r4,0x223e
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
- b 1f
-#endif
-
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
-
-#ifdef CONFIG_TAIHU
- b 1f
-_pci_66mhz:
- addis r3,0,PLLMR0_DEFAULT_PCI66@h
- ori r3,r3,PLLMR0_DEFAULT_PCI66@l
- addis r4,0,PLLMR1_DEFAULT_PCI66@h
- ori r4,r4,PLLMR1_DEFAULT_PCI66@l
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
-#endif /* CONFIG_TAIHU */
-
-1:
- b pll_write /* Write the CPC0_PLLMR with new value */
-
-pll_done:
- /*
- !-----------------------------------------------------------------------
- ! Clear Soft Reset Register
- ! This is needed to enable PCI if not booting from serial EPROM
- !-----------------------------------------------------------------------
- */
- addi r3, 0, 0x0
- mtdcr CPC0_SRR, r3
-
- addis r3,0,0x0010
- mtctr r3
-pci_wait:
- bdnz pci_wait
-
- blr /* return to main code */
-
-/*
-!-----------------------------------------------------------------------------
-! Function: pll_write
-! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
-! That is:
-! 1. Pll is first disabled (de-activated by putting in bypass mode)
-! 2. PLL is reset
-! 3. Clock dividers are set while PLL is held in reset and bypassed
-! 4. PLL Reset is cleared
-! 5. Wait 100us for PLL to lock
-! 6. A core reset is performed
-! Input: r3 = Value to write to CPC0_PLLMR0
-! Input: r4 = Value to write to CPC0_PLLMR1
-! Output r3 = none
-!-----------------------------------------------------------------------------
-*/
- .globl pll_write
-pll_write:
- mfdcr r5, CPC0_UCR
- andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
-
- mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
- mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- /*
- ! Wait min of 100us for PLL to lock.
- ! See CMOS 27E databook for more info.
- ! At 200MHz, that means waiting 20,000 instructions
- */
- addi r3,0,20000 /* 2000 = 0x4e20 */
- mtctr r3
-pll_wait:
- bdnz pll_wait
-
- oris r5,r5,0x8000 /* Enable PLL */
- mtdcr CPC0_PLLMR1,r5 /* Engage */
-
- /*
- * Reset CPU to guarantee timings are OK
- * Not sure if this is needed...
- */
- addis r3,0,0x1000
- mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| mttlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb3)
- TLBWE(4,3,2)
- blr
- function_epilog(mttlb3)
-
-/*----------------------------------------------------------------------------+
-| mftlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb3)
- TLBRE(3,3,2)
- blr
- function_epilog(mftlb3)
-
-/*----------------------------------------------------------------------------+
-| mttlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb2)
- TLBWE(4,3,1)
- blr
- function_epilog(mttlb2)
-
-/*----------------------------------------------------------------------------+
-| mftlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb2)
- TLBRE(3,3,1)
- blr
- function_epilog(mftlb2)
-
-/*----------------------------------------------------------------------------+
-| mttlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb1)
- TLBWE(4,3,0)
- blr
- function_epilog(mttlb1)
-
-/*----------------------------------------------------------------------------+
-| mftlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb1)
- TLBRE(3,3,0)
- blr
- function_epilog(mftlb1)
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
- mr r6,r3
- mr r7,r4
- mflr r8
-
- /*
- * Copy SPL from icache into SDRAM
- */
- subi r3,r3,4
- subi r4,r4,4
- srwi r5,r5,2
- mtctr r5
-..spl_loop:
- lwzu r0,4(r4)
- stwu r0,4(r3)
- bdnz ..spl_loop
-
- /*
- * Calculate "corrected" link register, so that we "continue"
- * in execution in destination range
- */
- sub r3,r7,r6 /* r3 = src - dst */
- sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
- mtlr r8
- blr
-
-nand_boot_common:
- /*
- * First initialize SDRAM. It has to be available *before* calling
- * nand_boot().
- */
- lis r3,CONFIG_SYS_SDRAM_BASE@h
- ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
- bl initdram
-
- /*
- * Now copy the 4k SPL code into SDRAM and continue execution
- * from there.
- */
- lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
- ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
- lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
- lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
- bl nand_boot_relocate
-
- /*
- * We're running from SDRAM now!!!
- *
- * It is necessary for 4xx systems to relocate from running at
- * the original location (0xfffffxxx) to somewhere else (SDRAM
- * preferably). This is because CS0 needs to be reconfigured for
- * NAND access. And we can't reconfigure this CS when currently
- * "running" from it.
- */
-
- /*
- * Finally call nand_boot() to load main NAND U-Boot image from
- * NAND and jump to it.
- */
- bl nand_boot /* will not return */
-#endif /* CONFIG_NAND_SPL */
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
deleted file mode 100644
index 24a9a9c..0000000
--- a/cpu/ppc4xx/tlb.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * (C) Copyright 2007
- * Stefan Roese, DENX Software Engineering, sr@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_440)
-
-#include <ppc440.h>
-#include <asm/cache.h>
-#include <asm/io.h>
-#include <asm/mmu.h>
-
-typedef struct region {
- u64 base;
- u32 size;
- u32 tlb_word2_i_value;
-} region_t;
-
-void remove_tlb(u32 vaddr, u32 size)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
- /*
- * Found a TLB in the range.
- * Disable it by writing 0 to tlb0 word.
- */
- mttlb1(i, 0);
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-/*
- * Change the I attribute (cache inhibited) of a TLB or multiple TLB's.
- * This function is used to either turn cache on or off in a specific
- * memory area.
- */
-void change_tlb(u32 vaddr, u32 size, u32 tlb_word2_i_value)
-{
- int i;
- u32 tlb_word0_value;
- u32 tlb_word2_value;
- u32 tlb_vaddr;
- u32 tlb_size = 0;
-
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
- if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
- (tlb_vaddr >= vaddr)) {
- /*
- * TLB is enabled and start address is lower or equal
- * than the area we are looking for. Now we only have
- * to check the size/end address for a match.
- */
- switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
- case TLB_WORD0_SIZE_1KB:
- tlb_size = 1 << 10;
- break;
- case TLB_WORD0_SIZE_4KB:
- tlb_size = 4 << 10;
- break;
- case TLB_WORD0_SIZE_16KB:
- tlb_size = 16 << 10;
- break;
- case TLB_WORD0_SIZE_64KB:
- tlb_size = 64 << 10;
- break;
- case TLB_WORD0_SIZE_256KB:
- tlb_size = 256 << 10;
- break;
- case TLB_WORD0_SIZE_1MB:
- tlb_size = 1 << 20;
- break;
- case TLB_WORD0_SIZE_16MB:
- tlb_size = 16 << 20;
- break;
- case TLB_WORD0_SIZE_256MB:
- tlb_size = 256 << 20;
- break;
- }
-
- /*
- * Now check the end-address if it's in the range
- */
- if (((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1)) ||
- ((tlb_vaddr < (vaddr + size - 1)) &&
- ((tlb_vaddr + tlb_size - 1) > (vaddr + size - 1)))) {
- /*
- * Found a TLB in the range.
- * Change cache attribute in tlb2 word.
- */
- tlb_word2_value =
- TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /*
- * Now either flush or invalidate the dcache
- */
- if (tlb_word2_i_value)
- flush_dcache();
- else
- invalidate_dcache();
-
- mttlb3(i, tlb_word2_value);
- asm("iccci 0,0");
- }
- }
- }
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-}
-
-static int add_tlb_entry(u64 phys_addr,
- u32 virt_addr,
- u32 tlb_word0_size_value,
- u32 tlb_word2_i_value)
-{
- int i;
- unsigned long tlb_word0_value;
- unsigned long tlb_word1_value;
- unsigned long tlb_word2_value;
-
- /* First, find the index of a TLB entry not being used */
- for (i=0; i<PPC4XX_TLB_SIZE; i++) {
- tlb_word0_value = mftlb1(i);
- if ((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_DISABLE)
- break;
- }
- if (i >= PPC4XX_TLB_SIZE)
- return -1;
-
- /* Second, create the TLB entry */
- tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE |
- TLB_WORD0_TS_0 | tlb_word0_size_value;
- tlb_word1_value = TLB_WORD1_RPN_ENCODE((u32)phys_addr) |
- TLB_WORD1_ERPN_ENCODE(phys_addr >> 32);
- tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE |
- TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE |
- TLB_WORD2_W_DISABLE | tlb_word2_i_value |
- TLB_WORD2_M_DISABLE | TLB_WORD2_G_DISABLE |
- TLB_WORD2_E_DISABLE | TLB_WORD2_UX_ENABLE |
- TLB_WORD2_UW_ENABLE | TLB_WORD2_UR_ENABLE |
- TLB_WORD2_SX_ENABLE | TLB_WORD2_SW_ENABLE |
- TLB_WORD2_SR_ENABLE;
-
- /* Wait for all memory accesses to complete */
- sync();
-
- /* Third, add the TLB entries */
- mttlb1(i, tlb_word0_value);
- mttlb2(i, tlb_word1_value);
- mttlb3(i, tlb_word2_value);
-
- /* Execute an ISYNC instruction so that the new TLB entry takes effect */
- asm("isync");
-
- return 0;
-}
-
-static void program_tlb_addr(u64 phys_addr,
- u32 virt_addr,
- u32 mem_size,
- u32 tlb_word2_i_value)
-{
- int rc;
- int tlb_i;
-
- tlb_i = tlb_word2_i_value;
- while (mem_size != 0) {
- rc = 0;
- /* Add the TLB entries in to map the region. */
- if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256MB_SIZE)) {
- /* Add a 256MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256MB, tlb_i)) == 0) {
- mem_size -= TLB_256MB_SIZE;
- phys_addr += TLB_256MB_SIZE;
- virt_addr += TLB_256MB_SIZE;
- }
- } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16MB_SIZE)) {
- /* Add a 16MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16MB, tlb_i)) == 0) {
- mem_size -= TLB_16MB_SIZE;
- phys_addr += TLB_16MB_SIZE;
- virt_addr += TLB_16MB_SIZE;
- }
- } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1MB_SIZE)) {
- /* Add a 1MB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1MB, tlb_i)) == 0) {
- mem_size -= TLB_1MB_SIZE;
- phys_addr += TLB_1MB_SIZE;
- virt_addr += TLB_1MB_SIZE;
- }
- } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_256KB_SIZE)) {
- /* Add a 256KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_256KB, tlb_i)) == 0) {
- mem_size -= TLB_256KB_SIZE;
- phys_addr += TLB_256KB_SIZE;
- virt_addr += TLB_256KB_SIZE;
- }
- } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_64KB_SIZE)) {
- /* Add a 64KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_64KB, tlb_i)) == 0) {
- mem_size -= TLB_64KB_SIZE;
- phys_addr += TLB_64KB_SIZE;
- virt_addr += TLB_64KB_SIZE;
- }
- } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_16KB_SIZE)) {
- /* Add a 16KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_16KB, tlb_i)) == 0) {
- mem_size -= TLB_16KB_SIZE;
- phys_addr += TLB_16KB_SIZE;
- virt_addr += TLB_16KB_SIZE;
- }
- } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_4KB_SIZE)) {
- /* Add a 4KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_4KB, tlb_i)) == 0) {
- mem_size -= TLB_4KB_SIZE;
- phys_addr += TLB_4KB_SIZE;
- virt_addr += TLB_4KB_SIZE;
- }
- } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) &&
- (mem_size >= TLB_1KB_SIZE)) {
- /* Add a 1KB TLB entry */
- if ((rc = add_tlb_entry(phys_addr, virt_addr,
- TLB_WORD0_SIZE_1KB, tlb_i)) == 0) {
- mem_size -= TLB_1KB_SIZE;
- phys_addr += TLB_1KB_SIZE;
- virt_addr += TLB_1KB_SIZE;
- }
- } else {
- printf("ERROR: no TLB size exists for the base address 0x%llx.\n",
- phys_addr);
- }
-
- if (rc != 0)
- printf("ERROR: no TLB entries available for the base addr 0x%llx.\n",
- phys_addr);
- }
-
- return;
-}
-
-/*
- * Program one (or multiple) TLB entries for one memory region
- *
- * Common usage for boards with SDRAM DIMM modules to dynamically
- * configure the TLB's for the SDRAM
- */
-void program_tlb(u64 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value)
-{
- region_t region_array;
-
- region_array.base = phys_addr;
- region_array.size = size;
- region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */
-
- /* Call the routine to add in the tlb entries for the memory regions */
- program_tlb_addr(region_array.base, virt_addr, region_array.size,
- region_array.tlb_word2_i_value);
-
- return;
-}
-
-#endif /* CONFIG_440 */
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
deleted file mode 100644
index 42e4221..0000000
--- a/cpu/ppc4xx/traps.c
+++ /dev/null
@@ -1,409 +0,0 @@
-/*
- * linux/arch/ppc/kernel/traps.c
- *
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modified by Cort Dougan (cort@cs.nmt.edu)
- * and Paul Mackerras (paulus@cs.anu.edu.au)
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file handles the architecture-dependent parts of hardware exceptions
- */
-
-#include <common.h>
-#include <command.h>
-#include <kgdb.h>
-#include <asm/processor.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Returns 0 if exception not found and fixup otherwise. */
-extern unsigned long search_exception_table(unsigned long);
-
-/* THIS NEEDS CHANGING to use the board info structure.
- */
-#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize)
-
-static __inline__ void set_tsr(unsigned long val)
-{
-#if defined(CONFIG_440)
- asm volatile("mtspr 0x150, %0" : : "r" (val));
-#else
- asm volatile("mttsr %0" : : "r" (val));
-#endif
-}
-
-static __inline__ unsigned long get_esr(void)
-{
- unsigned long val;
-
-#if defined(CONFIG_440)
- asm volatile("mfspr %0, 0x03e" : "=r" (val) :);
-#else
- asm volatile("mfesr %0" : "=r" (val) :);
-#endif
- return val;
-}
-
-#define ESR_MCI 0x80000000
-#define ESR_PIL 0x08000000
-#define ESR_PPR 0x04000000
-#define ESR_PTR 0x02000000
-#define ESR_DST 0x00800000
-#define ESR_DIZ 0x00400000
-#define ESR_U0F 0x00008000
-
-#if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint(struct pt_regs *);
-#endif
-
-/*
- * Trap & Exception support
- */
-
-void
-print_backtrace(unsigned long *sp)
-{
- int cnt = 0;
- unsigned long i;
-
- printf("Call backtrace: ");
- while (sp) {
- if ((uint)sp > END_OF_MEM)
- break;
-
- i = sp[1];
- if (cnt++ % 7 == 0)
- printf("\n");
- printf("%08lX ", i);
- if (cnt > 32) break;
- sp = (unsigned long *)*sp;
- }
- printf("\n");
-}
-
-void show_regs(struct pt_regs * regs)
-{
- int i;
-
- printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n",
- regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
- printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
- regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0,
- regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0,
- regs->msr&MSR_IR ? 1 : 0,
- regs->msr&MSR_DR ? 1 : 0);
-
- printf("\n");
- for (i = 0; i < 32; i++) {
- if ((i % 8) == 0) {
- printf("GPR%02d: ", i);
- }
-
- printf("%08lX ", regs->gpr[i]);
- if ((i % 8) == 7) {
- printf("\n");
- }
- }
-}
-
-
-void
-_exception(int signr, struct pt_regs *regs)
-{
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Exception");
-}
-
-void
-MachineCheckException(struct pt_regs *regs)
-{
- unsigned long fixup, val;
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- u32 value2;
- int corr_ecc = 0;
- int uncorr_ecc = 0;
-#endif
-
- if ((fixup = search_exception_table(regs->nip)) != 0) {
- regs->nip = fixup;
- val = mfspr(MCSR);
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- return;
- }
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Machine Check Exception.\n");
- printf("Caused by (from msr): ");
- printf("regs %p ", regs);
-
- val = get_esr();
-
-#if !defined(CONFIG_440) && !defined(CONFIG_405EX)
- if (val& ESR_IMCP) {
- printf("Instruction");
- mtspr(ESR, val & ~ESR_IMCP);
- } else {
- printf("Data");
- }
- printf(" machine check.\n");
-
-#elif defined(CONFIG_440) || defined(CONFIG_405EX)
- if (val& ESR_IMCP){
- printf("Instruction Synchronous Machine Check exception\n");
- mtspr(SPRN_ESR, val & ~ESR_IMCP);
- } else {
- val = mfspr(MCSR);
- if (val & MCSR_IB)
- printf("Instruction Read PLB Error\n");
-#if defined(CONFIG_440)
- if (val & MCSR_DRB)
- printf("Data Read PLB Error\n");
- if (val & MCSR_DWB)
- printf("Data Write PLB Error\n");
-#else
- if (val & MCSR_DB)
- printf("Data PLB Error\n");
-#endif
- if (val & MCSR_TLBP)
- printf("TLB Parity Error\n");
- if (val & MCSR_ICP){
- /*flush_instruction_cache(); */
- printf("I-Cache Parity Error\n");
- }
- if (val & MCSR_DCSP)
- printf("D-Cache Search Parity Error\n");
- if (val & MCSR_DCFP)
- printf("D-Cache Flush Parity Error\n");
- if (val & MCSR_IMPE)
- printf("Machine Check exception is imprecise\n");
-
- /* Clear MCSR */
- mtspr(SPRN_MCSR, val);
- }
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- mfsdram(DDR0_00, val) ;
- printf("DDR0: DDR0_00 %lx\n", val);
- val = (val >> 16) & 0xff;
- if (val & 0x80)
- printf("DDR0: At least one interrupt active\n");
- if (val & 0x40)
- printf("DDR0: DRAM initialization complete.\n");
- if (val & 0x20) {
- printf("DDR0: Multiple uncorrectable ECC events.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x10) {
- printf("DDR0: Single uncorrectable ECC event.\n");
- uncorr_ecc = 1;
- }
- if (val & 0x08) {
- printf("DDR0: Multiple correctable ECC events.\n");
- corr_ecc = 1;
- }
- if (val & 0x04) {
- printf("DDR0: Single correctable ECC event.\n");
- corr_ecc = 1;
- }
- if (val & 0x02)
- printf("Multiple accesses outside the defined"
- " physical memory space detected\n");
- if (val & 0x01)
- printf("DDR0: Single access outside the defined"
- " physical memory space detected.\n");
-
- mfsdram(DDR0_01, val);
- val = (val >> 8) & 0x7;
- switch (val ) {
- case 0:
- printf("DDR0: Write Out-of-Range command\n");
- break;
- case 1:
- printf("DDR0: Read Out-of-Range command\n");
- break;
- case 2:
- printf("DDR0: Masked write Out-of-Range command\n");
- break;
- case 4:
- printf("DDR0: Wrap write Out-of-Range command\n");
- break;
- case 5:
- printf("DDR0: Wrap read Out-of-Range command\n");
- break;
- default:
- mfsdram(DDR0_01, value2);
- printf("DDR0: No DDR0 error know 0x%lx %x\n", val, value2);
- }
- mfsdram(DDR0_23, val);
- if (((val >> 16) & 0xff) && corr_ecc)
- printf("DDR0: Syndrome for correctable ECC event 0x%lx\n",
- (val >> 16) & 0xff);
- mfsdram(DDR0_23, val);
- if (((val >> 8) & 0xff) && uncorr_ecc)
- printf("DDR0: Syndrome for uncorrectable ECC event 0x%lx\n",
- (val >> 8) & 0xff);
- mfsdram(DDR0_33, val);
- if (val)
- printf("DDR0: Address of command that caused an "
- "Out-of-Range interrupt %lx\n", val);
- mfsdram(DDR0_34, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_35, val);
- if (val && uncorr_ecc)
- printf("DDR0: Address of uncorrectable ECC event %lx\n", val);
- mfsdram(DDR0_36, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_37, val);
- if (val && uncorr_ecc)
- printf("DDR0: Data of uncorrectable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_38, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_39, val);
- if (val && corr_ecc)
- printf("DDR0: Address of correctable ECC event %lx\n", val);
- mfsdram(DDR0_40, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
- mfsdram(DDR0_41, val);
- if (val && corr_ecc)
- printf("DDR0: Data of correctable ECC event 0x%08lx\n", val);
-#endif /* CONFIG_440EPX */
-#endif /* CONFIG_440 */
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("machine check");
-}
-
-void
-AlignmentException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Alignment Exception");
-}
-
-void
-ProgramCheckException(struct pt_regs *regs)
-{
- long esr_val;
-
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- show_regs(regs);
-
- esr_val = get_esr();
- if( esr_val & ESR_PIL )
- printf( "** Illegal Instruction **\n" );
- else if( esr_val & ESR_PPR )
- printf( "** Privileged Instruction **\n" );
- else if( esr_val & ESR_PTR )
- printf( "** Trap Instruction **\n" );
-
- print_backtrace((unsigned long *)regs->gpr[1]);
- panic("Program Check Exception");
-}
-
-void
-DecrementerPITException(struct pt_regs *regs)
-{
- /*
- * Reset PIT interrupt
- */
- set_tsr(0x08000000);
-
- /*
- * Call timer_interrupt routine in interrupts.c
- */
- timer_interrupt(NULL);
-}
-
-
-void
-UnknownException(struct pt_regs *regs)
-{
-#if defined(CONFIG_CMD_KGDB)
- if (debugger_exception_handler && (*debugger_exception_handler)(regs))
- return;
-#endif
-
- printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
- regs->nip, regs->msr, regs->trap);
- _exception(0, regs);
-}
-
-void
-DebugException(struct pt_regs *regs)
-{
- printf("Debugger trap at @ %lx\n", regs->nip );
- show_regs(regs);
-#if defined(CONFIG_CMD_BEDBUG)
- do_bedbug_breakpoint( regs );
-#endif
-}
-
-/* Probe an address by reading. If not present, return -1, otherwise
- * return 0.
- */
-int
-addr_probe(uint *addr)
-{
-#if 0
- int retval;
-
- __asm__ __volatile__( \
- "1: lwz %0,0(%1)\n" \
- " eieio\n" \
- " li %0,0\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: li %0,-1\n" \
- " b 2b\n" \
- ".section __ex_table,\"a\"\n" \
- " .align 2\n" \
- " .long 1b,3b\n" \
- ".text" \
- : "=r" (retval) : "r"(addr));
-
- return (retval);
-#endif
- return 0;
-}
diff --git a/cpu/ppc4xx/u-boot.lds b/cpu/ppc4xx/u-boot.lds
deleted file mode 100644
index 2b47934..0000000
--- a/cpu/ppc4xx/u-boot.lds
+++ /dev/null
@@ -1,169 +0,0 @@
-/*
- * Copyright 2007-2009 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include "config.h" /* CONFIG_BOARDDIR */
-
-#ifndef RESET_VECTOR_ADDRESS
-#define RESET_VECTOR_ADDRESS 0xfffffffc
-#endif
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-PHDRS
-{
- text PT_LOAD;
- bss PT_LOAD;
-}
-
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- *(.text)
- *(.got1)
- } :text
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.eh_frame)
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- } :text
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x00FF) & 0xFFFFFF00;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
- __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- . = .;
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
-#ifdef CONFIG_440
- .bootpg RESET_VECTOR_ADDRESS - 0xffc :
- {
- cpu/ppc4xx/start.o (.bootpg)
-
- /*
- * PPC440 board need a board specific object with the
- * TLB definitions. This needs to get included right after
- * start.o, since the first shadow TLB only covers 4k
- * of address space.
- */
- CONFIG_BOARDDIR/init.o (.bootpg)
- } :text = 0xffff
-#endif
-
- .resetvec RESET_VECTOR_ADDRESS :
- {
- *(.resetvec)
- } :text = 0xffff
-
- . = RESET_VECTOR_ADDRESS + 0x4;
-
- /*
- * Make sure that the bss segment isn't linked at 0x0, otherwise its
- * address won't be updated during relocation fixups. Note that
- * this is a temporary fix. Code to dynamically the fixup the bss
- * location will be added in the future. When the bss relocation
- * fixup code is present this workaround should be removed.
- */
-#if (RESET_VECTOR_ADDRESS == 0xfffffffc)
- . |= 0x10;
-#endif
-
- __bss_start = .;
- .bss (NOLOAD) :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- } :bss
-
- . = ALIGN(4);
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/cpu/ppc4xx/uic.c b/cpu/ppc4xx/uic.c
deleted file mode 100644
index 8b1b259..0000000
--- a/cpu/ppc4xx/uic.c
+++ /dev/null
@@ -1,180 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 (440 port)
- * Scott McNutt, Artesyn Communication Producs, smcnutt@artsyncp.com
- *
- * (C) Copyright 2003 (440GX port)
- * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com
- *
- * (C) Copyright 2008 (PPC440X05 port for Virtex 5 FX)
- * Ricardo Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * Work supported by Qtechnology (htpp://qtec.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-
-#if (UIC_MAX > 3)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI) | \
- UIC_MASK(VECNUM_UIC3CI) | UIC_MASK(VECNUM_UIC3NCI))
-#elif (UIC_MAX > 2)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI) | \
- UIC_MASK(VECNUM_UIC2CI) | UIC_MASK(VECNUM_UIC2NCI))
-#elif (UIC_MAX > 1)
-#define UICB0_ALL (UIC_MASK(VECNUM_UIC1CI) | UIC_MASK(VECNUM_UIC1NCI))
-#else
-#define UICB0_ALL 0
-#endif
-
-u32 get_dcr(u16);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
-#if (UIC_MAX > 1)
- /* Install the UIC1 handlers */
- irq_install_handler(VECNUM_UIC1NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC1CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 2)
- irq_install_handler(VECNUM_UIC2NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC2CI, (void *)(void *)external_interrupt, 0);
-#endif
-#if (UIC_MAX > 3)
- irq_install_handler(VECNUM_UIC3NCI, (void *)(void *)external_interrupt, 0);
- irq_install_handler(VECNUM_UIC3CI, (void *)(void *)external_interrupt, 0);
-#endif
-}
-
-/* Handler for UIC interrupt */
-static void uic_interrupt(u32 uic_base, int vec_base)
-{
- u32 uic_msr;
- u32 msr_shift;
- int vec;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = get_dcr(uic_base + UIC_MSR);
- msr_shift = uic_msr;
- vec = vec_base;
-
- while (msr_shift != 0) {
- if (msr_shift & 0x80000000)
- interrupt_run_handler(vec);
- /*
- * Shift msr to next position and increment vector
- */
- msr_shift <<= 1;
- vec++;
- }
-}
-
-/*
- * Handle external interrupts
- */
-void external_interrupt(struct pt_regs *regs)
-{
- u32 uic_msr;
-
- /*
- * Read masked interrupt status register to determine interrupt source
- */
- uic_msr = mfdcr(UIC0MSR);
-
-#if (UIC_MAX > 1)
- if ((UIC_MASK(VECNUM_UIC1CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC1NCI) & uic_msr))
- uic_interrupt(UIC1_DCR_BASE, 32);
-#endif
-
-#if (UIC_MAX > 2)
- if ((UIC_MASK(VECNUM_UIC2CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC2NCI) & uic_msr))
- uic_interrupt(UIC2_DCR_BASE, 64);
-#endif
-
-#if (UIC_MAX > 3)
- if ((UIC_MASK(VECNUM_UIC3CI) & uic_msr) ||
- (UIC_MASK(VECNUM_UIC3NCI) & uic_msr))
- uic_interrupt(UIC3_DCR_BASE, 96);
-#endif
-
- mtdcr(UIC0SR, (uic_msr & UICB0_ALL));
-
- if (uic_msr & ~(UICB0_ALL))
- uic_interrupt(UIC0_DCR_BASE, 0);
-
- return;
-}
-
-void pic_irq_ack(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0SR, UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1SR, UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2SR, UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3SR, UIC_MASK(vec));
-}
-
-/*
- * Install and free a interrupt handler.
- */
-void pic_irq_enable(unsigned int vec)
-{
-
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) | UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) | UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) | UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) | UIC_MASK(vec));
-
- debug("Install interrupt vector %d\n", vec);
-}
-
-void pic_irq_disable(unsigned int vec)
-{
- if ((vec >= 0) && (vec < 32))
- mtdcr(UIC0ER, mfdcr(UIC0ER) & ~UIC_MASK(vec));
- else if ((vec >= 32) && (vec < 64))
- mtdcr(UIC1ER, mfdcr(UIC1ER) & ~UIC_MASK(vec));
- else if ((vec >= 64) && (vec < 96))
- mtdcr(UIC2ER, mfdcr(UIC2ER) & ~UIC_MASK(vec));
- else if (vec >= 96)
- mtdcr(UIC3ER, mfdcr(UIC3ER) & ~UIC_MASK(vec));
-}
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
deleted file mode 100644
index 592efe7..0000000
--- a/cpu/ppc4xx/usb.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2007
- * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
-
-#ifdef CONFIG_4xx_DCACHE
-#include <asm/mmu.h>
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
-#include "usbdev.h"
-
-int usb_cpu_init(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* disable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE);
-#endif
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- usb_dev_init();
-#endif
- return 0;
-}
-
-int usb_cpu_stop(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-#ifdef CONFIG_4xx_DCACHE
- /* enable cache */
- change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0);
-#endif
- return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
deleted file mode 100644
index a9edacd..0000000
--- a/cpu/ppc4xx/usb_ohci.c
+++ /dev/null
@@ -1,1648 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB on the PPC440EP.
- *
- * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering <garyj@denx.de>
- *
- * (C) Copyright 2004
- * Pierre Aubert, Staubli Faverges <p.aubert@staubli.com>
- *
- * Note: Much of this code has been derived from Linux 2.4
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2002 David Brownell
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-/*
- * IMPORTANT NOTES
- * 1 - this driver is intended for use with USB Mass Storage Devices
- * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes!
- */
-
-#include <common.h>
-
-#ifdef CONFIG_USB_OHCI
-
-#include <malloc.h>
-#include <usb.h>
-#include "usb_ohci.h"
-
-#include "usbdev.h"
-
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
-#undef OHCI_VERBOSE_DEBUG /* not always helpful */
-#undef DEBUG
-#undef SHOW_INFO
-#undef OHCI_FILL_TRACE
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define OHCI_CONTROL_INIT \
- (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE
-
-#define readl(a) (*((volatile u32 *)(a)))
-#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a))
-
-#define min_t(type,x,y) ({ type __x = (x); type __y = (y); __x < __y ? __x: __y; })
-
-#ifdef DEBUG
-#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg)
-#else
-#define dbg(format, arg...) do {} while(0)
-#endif /* DEBUG */
-#define err(format, arg...) printf("ERROR: " format "\n", ## arg)
-#ifdef SHOW_INFO
-#define info(format, arg...) printf("INFO: " format "\n", ## arg)
-#else
-#define info(format, arg...) do {} while(0)
-#endif
-
-#define m16_swap(x) swap_16(x)
-#define m32_swap(x) swap_32(x)
-
-#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
-#define ohci_cpu_to_le16(x) (x)
-#define ohci_cpu_to_le32(x) (x)
-#else
-#define ohci_cpu_to_le16(x) swap_16(x)
-#define ohci_cpu_to_le32(x) swap_32(x)
-#endif
-
-/* global ohci_t */
-static ohci_t gohci;
-/* this must be aligned to a 256 byte boundary */
-struct ohci_hcca ghcca[1];
-/* a pointer to the aligned storage */
-struct ohci_hcca *phcca;
-/* this allocates EDs for all possible endpoints */
-struct ohci_device ohci_dev;
-/* urb_priv */
-urb_priv_t urb_priv;
-/* RHSC flag */
-int got_rhsc;
-/* device which was disconnected */
-struct usb_device *devgone;
-/* flag guarding URB transation */
-int urb_finished = 0;
-
-/*-------------------------------------------------------------------------*/
-
-/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
- * The erratum (#4) description is incorrect. AMD's workaround waits
- * till some bits (mostly reserved) are clear; ok for all revs.
- */
-#define OHCI_QUIRK_AMD756 0xabcd
-#define read_roothub(hc, register, mask) ({ \
- u32 temp = readl (&hc->regs->roothub.register); \
- if (hc->flags & OHCI_QUIRK_AMD756) \
- while (temp & mask) \
- temp = readl (&hc->regs->roothub.register); \
- temp; })
-
-static u32 roothub_a (struct ohci *hc)
- { return read_roothub (hc, a, 0xfc0fe000); }
-static inline u32 roothub_b (struct ohci *hc)
- { return readl (&hc->regs->roothub.b); }
-static inline u32 roothub_status (struct ohci *hc)
- { return readl (&hc->regs->roothub.status); }
-static u32 roothub_portstatus (struct ohci *hc, int i)
- { return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
-
-/* forward declaration */
-static int hc_interrupt (void);
-static void
-td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval);
-
-/*-------------------------------------------------------------------------*
- * URB support functions
- *-------------------------------------------------------------------------*/
-
-/* free HCD-private data associated with this URB */
-
-static void urb_free_priv (urb_priv_t * urb)
-{
- int i;
- int last;
- struct td * td;
-
- last = urb->length - 1;
- if (last >= 0) {
- for (i = 0; i <= last; i++) {
- td = urb->td[i];
- if (td) {
- td->usb_dev = NULL;
- urb->td[i] = NULL;
- }
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-static int sohci_get_current_frame_number (struct usb_device * dev);
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header */
-
-static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer,
- int transfer_len, struct devrequest * setup, char * str, int small)
-{
- urb_priv_t * purb = &urb_priv;
-
- dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx",
- str,
- sohci_get_current_frame_number (dev),
- usb_pipedevice (pipe),
- usb_pipeendpoint (pipe),
- usb_pipeout (pipe)? 'O': 'I',
- usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"):
- (usb_pipecontrol (pipe)? "CTRL": "BULK"),
- purb->actual_length,
- transfer_len, dev->status);
-#ifdef OHCI_VERBOSE_DEBUG
- if (!small) {
- int i, len;
-
- if (usb_pipecontrol (pipe)) {
- printf (__FILE__ ": cmd(8):");
- for (i = 0; i < 8 ; i++)
- printf (" %02x", ((__u8 *) setup) [i]);
- printf ("\n");
- }
- if (transfer_len > 0 && buffer) {
- printf (__FILE__ ": data(%d/%d):",
- purb->actual_length,
- transfer_len);
- len = usb_pipeout (pipe)?
- transfer_len: purb->actual_length;
- for (i = 0; i < 16 && i < len; i++)
- printf (" %02x", ((__u8 *) buffer) [i]);
- printf ("%s\n", i < len? "...": "");
- }
- }
-#endif
-}
-
-/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/
-void ep_print_int_eds (ohci_t *ohci, char * str) {
- int i, j;
- __u32 * ed_p;
- for (i= 0; i < 32; i++) {
- j = 5;
- ed_p = &(ohci->hcca->int_table [i]);
- if (*ed_p == 0)
- continue;
- printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i);
- while (*ed_p != 0 && j--) {
- ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p);
- printf (" ed: %4x;", ed->hwINFO);
- ed_p = &ed->hwNextED;
- }
- printf ("\n");
- }
-}
-
-static void ohci_dump_intr_mask (char *label, __u32 mask)
-{
- dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s",
- label,
- mask,
- (mask & OHCI_INTR_MIE) ? " MIE" : "",
- (mask & OHCI_INTR_OC) ? " OC" : "",
- (mask & OHCI_INTR_RHSC) ? " RHSC" : "",
- (mask & OHCI_INTR_FNO) ? " FNO" : "",
- (mask & OHCI_INTR_UE) ? " UE" : "",
- (mask & OHCI_INTR_RD) ? " RD" : "",
- (mask & OHCI_INTR_SF) ? " SF" : "",
- (mask & OHCI_INTR_WDH) ? " WDH" : "",
- (mask & OHCI_INTR_SO) ? " SO" : ""
- );
-}
-
-static void maybe_print_eds (char *label, __u32 value)
-{
- ed_t *edp = (ed_t *)value;
-
- if (value) {
- dbg ("%s %08x", label, value);
- dbg ("%08x", edp->hwINFO);
- dbg ("%08x", edp->hwTailP);
- dbg ("%08x", edp->hwHeadP);
- dbg ("%08x", edp->hwNextED);
- }
-}
-
-static char * hcfs2string (int state)
-{
- switch (state) {
- case OHCI_USB_RESET: return "reset";
- case OHCI_USB_RESUME: return "resume";
- case OHCI_USB_OPER: return "operational";
- case OHCI_USB_SUSPEND: return "suspend";
- }
- return "?";
-}
-
-/* dump control and status registers */
-static void ohci_dump_status (ohci_t *controller)
-{
- struct ohci_regs *regs = controller->regs;
- __u32 temp;
-
- temp = readl (&regs->revision) & 0xff;
- if (temp != 0x10)
- dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f));
-
- temp = readl (&regs->control);
- dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp,
- (temp & OHCI_CTRL_RWE) ? " RWE" : "",
- (temp & OHCI_CTRL_RWC) ? " RWC" : "",
- (temp & OHCI_CTRL_IR) ? " IR" : "",
- hcfs2string (temp & OHCI_CTRL_HCFS),
- (temp & OHCI_CTRL_BLE) ? " BLE" : "",
- (temp & OHCI_CTRL_CLE) ? " CLE" : "",
- (temp & OHCI_CTRL_IE) ? " IE" : "",
- (temp & OHCI_CTRL_PLE) ? " PLE" : "",
- temp & OHCI_CTRL_CBSR
- );
-
- temp = readl (&regs->cmdstatus);
- dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp,
- (temp & OHCI_SOC) >> 16,
- (temp & OHCI_OCR) ? " OCR" : "",
- (temp & OHCI_BLF) ? " BLF" : "",
- (temp & OHCI_CLF) ? " CLF" : "",
- (temp & OHCI_HCR) ? " HCR" : ""
- );
-
- ohci_dump_intr_mask ("intrstatus", readl (&regs->intrstatus));
- ohci_dump_intr_mask ("intrenable", readl (&regs->intrenable));
-
- maybe_print_eds ("ed_periodcurrent", readl (&regs->ed_periodcurrent));
-
- maybe_print_eds ("ed_controlhead", readl (&regs->ed_controlhead));
- maybe_print_eds ("ed_controlcurrent", readl (&regs->ed_controlcurrent));
-
- maybe_print_eds ("ed_bulkhead", readl (&regs->ed_bulkhead));
- maybe_print_eds ("ed_bulkcurrent", readl (&regs->ed_bulkcurrent));
-
- maybe_print_eds ("donehead", readl (&regs->donehead));
-}
-
-static void ohci_dump_roothub (ohci_t *controller, int verbose)
-{
- __u32 temp, ndp, i;
-
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
-
- if (verbose) {
- dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp,
- ((temp & RH_A_POTPGT) >> 24) & 0xff,
- (temp & RH_A_NOCP) ? " NOCP" : "",
- (temp & RH_A_OCPM) ? " OCPM" : "",
- (temp & RH_A_DT) ? " DT" : "",
- (temp & RH_A_NPS) ? " NPS" : "",
- (temp & RH_A_PSM) ? " PSM" : "",
- ndp
- );
- temp = roothub_b (controller);
- dbg ("roothub.b: %08x PPCM=%04x DR=%04x",
- temp,
- (temp & RH_B_PPCM) >> 16,
- (temp & RH_B_DR)
- );
- temp = roothub_status (controller);
- dbg ("roothub.status: %08x%s%s%s%s%s%s",
- temp,
- (temp & RH_HS_CRWE) ? " CRWE" : "",
- (temp & RH_HS_OCIC) ? " OCIC" : "",
- (temp & RH_HS_LPSC) ? " LPSC" : "",
- (temp & RH_HS_DRWE) ? " DRWE" : "",
- (temp & RH_HS_OCI) ? " OCI" : "",
- (temp & RH_HS_LPS) ? " LPS" : ""
- );
- }
-
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s",
- i,
- temp,
- (temp & RH_PS_PRSC) ? " PRSC" : "",
- (temp & RH_PS_OCIC) ? " OCIC" : "",
- (temp & RH_PS_PSSC) ? " PSSC" : "",
- (temp & RH_PS_PESC) ? " PESC" : "",
- (temp & RH_PS_CSC) ? " CSC" : "",
-
- (temp & RH_PS_LSDA) ? " LSDA" : "",
- (temp & RH_PS_PPS) ? " PPS" : "",
- (temp & RH_PS_PRS) ? " PRS" : "",
- (temp & RH_PS_POCI) ? " POCI" : "",
- (temp & RH_PS_PSS) ? " PSS" : "",
-
- (temp & RH_PS_PES) ? " PES" : "",
- (temp & RH_PS_CCS) ? " CCS" : ""
- );
- }
-}
-
-static void ohci_dump (ohci_t *controller, int verbose)
-{
- dbg ("OHCI controller usb-%s state", controller->slot_name);
-
- /* dumps some of the state we know about */
- ohci_dump_status (controller);
- if (verbose)
- ep_print_int_eds (controller, "hcca");
- dbg ("hcca frame #%04x", controller->hcca->frame_no);
- ohci_dump_roothub (controller, 1);
-}
-
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*
- * Interface functions (URB)
- *-------------------------------------------------------------------------*/
-
-/* get a transfer request */
-
-int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- ohci_t *ohci;
- ed_t * ed;
- urb_priv_t *purb_priv;
- int i, size = 0;
-
- ohci = &gohci;
-
- /* when controller's hung, permit only roothub cleanup attempts
- * such as powering down ports */
- if (ohci->disabled) {
- err("sohci_submit_job: EPIPE");
- return -1;
- }
-
- /* if we have an unfinished URB from previous transaction let's
- * fail and scream as quickly as possible so as not to corrupt
- * further communication */
- if (!urb_finished) {
- err("sohci_submit_job: URB NOT FINISHED");
- return -1;
- }
- /* we're about to begin a new transaction here so mark the URB unfinished */
- urb_finished = 0;
-
- /* every endpoint has a ed, locate and fill it */
- if (!(ed = ep_add_ed (dev, pipe))) {
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
-
- /* for the private part of the URB we need the number of TDs (size) */
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK: /* one TD for every 4096 Byte */
- size = (transfer_len - 1) / 4096 + 1;
- break;
- case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */
- size = (transfer_len == 0)? 2:
- (transfer_len - 1) / 4096 + 3;
- break;
- }
-
- if (size >= (N_URB_TD - 1)) {
- err("need %d TDs, only have %d", size, N_URB_TD);
- return -1;
- }
- purb_priv = &urb_priv;
- purb_priv->pipe = pipe;
-
- /* fill the private part of the URB */
- purb_priv->length = size;
- purb_priv->ed = ed;
- purb_priv->actual_length = 0;
-
- /* allocate the TDs */
- /* note that td[0] was allocated in ep_add_ed */
- for (i = 0; i < size; i++) {
- purb_priv->td[i] = td_alloc (dev);
- if (!purb_priv->td[i]) {
- purb_priv->length = i;
- urb_free_priv (purb_priv);
- err("sohci_submit_job: ENOMEM");
- return -1;
- }
- }
-
- if (ed->state == ED_NEW || (ed->state & ED_DEL)) {
- urb_free_priv (purb_priv);
- err("sohci_submit_job: EINVAL");
- return -1;
- }
-
- /* link the ed into a chain if is not already */
- if (ed->state != ED_OPER)
- ep_link (ohci, ed);
-
- /* fill the TDs and link it to the ed */
- td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval);
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-/* tell us the current USB frame number */
-
-static int sohci_get_current_frame_number (struct usb_device *usb_dev)
-{
- ohci_t *ohci = &gohci;
-
- return ohci_cpu_to_le16 (ohci->hcca->frame_no);
-}
-#endif
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-/* link an ed into one of the HC chains */
-
-static int ep_link (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->state = ED_OPER;
-
- switch (ed->type) {
- case PIPE_CONTROL:
- ed->hwNextED = 0;
- if (ohci->ed_controltail == NULL) {
- writel (ed, &ohci->regs->ed_controlhead);
- } else {
- ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_controltail;
- if (!ohci->ed_controltail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_controltail = edi;
- break;
-
- case PIPE_BULK:
- ed->hwNextED = 0;
- if (ohci->ed_bulktail == NULL) {
- writel (ed, &ohci->regs->ed_bulkhead);
- } else {
- ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed);
- }
- ed->ed_prev = ohci->ed_bulktail;
- if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] &&
- !ohci->ed_rm_list[1] && !ohci->sleeping) {
- ohci->hc_control |= OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- ohci->ed_bulktail = edi;
- break;
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* unlink an ed from one of the HC chains.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed */
-
-static int ep_unlink (ohci_t *ohci, ed_t *edi)
-{
- volatile ed_t *ed = edi;
-
- ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP);
-
- switch (ed->type) {
- case PIPE_CONTROL:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_CLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_controltail == ed) {
- ohci->ed_controltail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
-
- case PIPE_BULK:
- if (ed->ed_prev == NULL) {
- if (!ed->hwNextED) {
- ohci->hc_control &= ~OHCI_CTRL_BLE;
- writel (ohci->hc_control, &ohci->regs->control);
- }
- writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead);
- } else {
- ed->ed_prev->hwNextED = ed->hwNextED;
- }
- if (ohci->ed_bulktail == ed) {
- ohci->ed_bulktail = ed->ed_prev;
- } else {
- ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev;
- }
- break;
- }
- ed->state = ED_UNLINK;
- return 0;
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
-static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
-{
- td_t *td;
- ed_t *ed_ret;
- volatile ed_t *ed;
-
- ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) |
- (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))];
-
- if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) {
- err("ep_add_ed: pending delete");
- /* pending delete request */
- return NULL;
- }
-
- if (ed->state == ED_NEW) {
- ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */
- /* dummy td; end of td list for ed */
- td = td_alloc (usb_dev);
- ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td);
- ed->hwHeadP = ed->hwTailP;
- ed->state = ED_UNLINK;
- ed->type = usb_pipetype (pipe);
- ohci_dev.ed_cnt++;
- }
-
- ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe)
- | usb_pipeendpoint (pipe) << 7
- | (usb_pipeisoc (pipe)? 0x8000: 0)
- | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000))
- | usb_pipeslow (pipe) << 13
- | usb_maxpacket (usb_dev, pipe) << 16);
-
- return ed_ret;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void td_fill (ohci_t *ohci, unsigned int info,
- void *data, int len,
- struct usb_device *dev, int index, urb_priv_t *urb_priv)
-{
- volatile td_t *td, *td_pt;
-#ifdef OHCI_FILL_TRACE
- int i;
-#endif
-
- if (index > urb_priv->length) {
- err("index > length");
- return;
- }
- /* use this td as the next dummy */
- td_pt = urb_priv->td [index];
- td_pt->hwNextTD = 0;
-
- /* fill the old dummy TD */
- td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf);
-
- td->ed = urb_priv->ed;
- td->next_dl_td = NULL;
- td->index = index;
- td->data = (__u32)data;
-#ifdef OHCI_FILL_TRACE
- if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) {
- for (i = 0; i < len; i++)
- printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]);
- printf("\n");
- }
-#endif
- if (!len)
- data = 0;
-
- td->hwINFO = ohci_cpu_to_le32 (info);
- td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data);
- if (data)
- td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1));
- else
- td->hwBE = 0;
- td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt);
-
- /* append to queue */
- td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* prepare all TDs of a transfer */
-static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval)
-{
- ohci_t *ohci = &gohci;
- int data_len = transfer_len;
- void *data;
- int cnt = 0;
- __u32 info = 0;
- unsigned int toggle = 0;
-
- /* OHCI handles the DATA-toggles itself, we just use the USB-toggle bits for reseting */
- if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) {
- toggle = TD_T_TOGGLE;
- } else {
- toggle = TD_T_DATA0;
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1);
- }
- urb->td_cnt = 0;
- if (data_len)
- data = buffer;
- else
- data = 0;
-
- switch (usb_pipetype (pipe)) {
- case PIPE_BULK:
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ;
- while(data_len > 4096) {
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb);
- data += 4096; data_len -= 4096; cnt++;
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ;
- td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb);
- cnt++;
-
- if (!ohci->sleeping)
- writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */
- break;
-
- case PIPE_CONTROL:
- info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
- td_fill (ohci, info, setup, 8, dev, cnt++, urb);
- if (data_len > 0) {
- info = usb_pipeout (pipe)?
- TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1;
- /* NOTE: mishandles transfers >8K, some >4K */
- td_fill (ohci, info, data, data_len, dev, cnt++, urb);
- }
- info = usb_pipeout (pipe)?
- TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1;
- td_fill (ohci, info, data, 0, dev, cnt++, urb);
- if (!ohci->sleeping)
- writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */
- break;
- }
- if (urb->length != cnt)
- dbg("TD LENGTH %d != CNT %d", urb->length, cnt);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-
-/* calculate the transfer length and update the urb */
-
-static void dl_transfer_length(td_t * td)
-{
- __u32 tdINFO, tdBE, tdCBP;
- urb_priv_t *lurb_priv = &urb_priv;
-
- tdINFO = ohci_cpu_to_le32 (td->hwINFO);
- tdBE = ohci_cpu_to_le32 (td->hwBE);
- tdCBP = ohci_cpu_to_le32 (td->hwCBP);
-
-
- if (!(usb_pipecontrol(lurb_priv->pipe) &&
- ((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
- if (tdBE != 0) {
- if (td->hwCBP == 0)
- lurb_priv->actual_length += tdBE - td->data + 1;
- else
- lurb_priv->actual_length += tdCBP - td->data;
- }
- }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* replies to the request have to be on a FIFO basis so
- * we reverse the reversed done-list */
-
-static td_t * dl_reverse_done_list (ohci_t *ohci)
-{
- __u32 td_list_hc;
- td_t *td_rev = NULL;
- td_t *td_list = NULL;
- urb_priv_t *lurb_priv = NULL;
-
- td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0;
- ohci->hcca->done_head = 0;
-
- while (td_list_hc) {
- td_list = (td_t *)td_list_hc;
-
- if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) {
- lurb_priv = &urb_priv;
- dbg(" USB-error/status: %x : %p",
- TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list);
- if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) {
- if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) {
- td_list->ed->hwHeadP =
- (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) |
- (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2));
- lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1;
- } else
- td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2);
- }
-#ifdef CONFIG_MPC5200
- td_list->hwNextTD = 0;
-#endif
- }
-
- td_list->next_dl_td = td_rev;
- td_rev = td_list;
- td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0;
- }
- return td_list;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* td done list */
-static int dl_done_list (ohci_t *ohci, td_t *td_list)
-{
- td_t *td_list_next = NULL;
- ed_t *ed;
- int cc = 0;
- int stat = 0;
- /* urb_t *urb; */
- urb_priv_t *lurb_priv;
- __u32 tdINFO, edHeadP, edTailP;
-
- while (td_list) {
- td_list_next = td_list->next_dl_td;
-
- lurb_priv = &urb_priv;
- tdINFO = ohci_cpu_to_le32 (td_list->hwINFO);
-
- ed = td_list->ed;
-
- dl_transfer_length(td_list);
-
- /* error code of transfer */
- cc = TD_CC_GET (tdINFO);
- if (++(lurb_priv->td_cnt) == lurb_priv->length) {
- if ((ed->state & (ED_OPER | ED_UNLINK))
- && (lurb_priv->state != URB_DEL)) {
- dbg("ConditionCode %#x", cc);
- stat = cc_to_error[cc];
- urb_finished = 1;
- }
- }
-
- if (ed->state != ED_NEW) {
- edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0;
- edTailP = ohci_cpu_to_le32 (ed->hwTailP);
-
- /* unlink eds if they are not busy */
- if ((edHeadP == edTailP) && (ed->state == ED_OPER))
- ep_unlink (ohci, ed);
- }
-
- td_list = td_list_next;
- }
- return stat;
-}
-
-/*-------------------------------------------------------------------------*
- * Virtual Root Hub
- *-------------------------------------------------------------------------*/
-
-/* Device descriptor */
-static __u8 root_hub_dev_des[] =
-{
- 0x12, /* __u8 bLength; */
- 0x01, /* __u8 bDescriptorType; Device */
- 0x10, /* __u16 bcdUSB; v1.1 */
- 0x01,
- 0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
- 0x00, /* __u8 bDeviceSubClass; */
- 0x00, /* __u8 bDeviceProtocol; */
- 0x08, /* __u8 bMaxPacketSize0; 8 Bytes */
- 0x00, /* __u16 idVendor; */
- 0x00,
- 0x00, /* __u16 idProduct; */
- 0x00,
- 0x00, /* __u16 bcdDevice; */
- 0x00,
- 0x00, /* __u8 iManufacturer; */
- 0x01, /* __u8 iProduct; */
- 0x00, /* __u8 iSerialNumber; */
- 0x01 /* __u8 bNumConfigurations; */
-};
-
-
-/* Configuration descriptor */
-static __u8 root_hub_config_des[] =
-{
- 0x09, /* __u8 bLength; */
- 0x02, /* __u8 bDescriptorType; Configuration */
- 0x19, /* __u16 wTotalLength; */
- 0x00,
- 0x01, /* __u8 bNumInterfaces; */
- 0x01, /* __u8 bConfigurationValue; */
- 0x00, /* __u8 iConfiguration; */
- 0x40, /* __u8 bmAttributes;
- Bit 7: Bus-powered, 6: Self-powered, 5 Remote-wakwup, 4..0: resvd */
- 0x00, /* __u8 MaxPower; */
-
- /* interface */
- 0x09, /* __u8 if_bLength; */
- 0x04, /* __u8 if_bDescriptorType; Interface */
- 0x00, /* __u8 if_bInterfaceNumber; */
- 0x00, /* __u8 if_bAlternateSetting; */
- 0x01, /* __u8 if_bNumEndpoints; */
- 0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
- 0x00, /* __u8 if_bInterfaceSubClass; */
- 0x00, /* __u8 if_bInterfaceProtocol; */
- 0x00, /* __u8 if_iInterface; */
-
- /* endpoint */
- 0x07, /* __u8 ep_bLength; */
- 0x05, /* __u8 ep_bDescriptorType; Endpoint */
- 0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
- 0x03, /* __u8 ep_bmAttributes; Interrupt */
- 0x02, /* __u16 ep_wMaxPacketSize; ((MAX_ROOT_PORTS + 1) / 8 */
- 0x00,
- 0xff /* __u8 ep_bInterval; 255 ms */
-};
-
-static unsigned char root_hub_str_index0[] =
-{
- 0x04, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 0x09, /* __u8 lang ID */
- 0x04, /* __u8 lang ID */
-};
-
-static unsigned char root_hub_str_index1[] =
-{
- 28, /* __u8 bLength; */
- 0x03, /* __u8 bDescriptorType; String-descriptor */
- 'O', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'C', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'I', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'R', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'o', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 't', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- ' ', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'H', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'u', /* __u8 Unicode */
- 0, /* __u8 Unicode */
- 'b', /* __u8 Unicode */
- 0, /* __u8 Unicode */
-};
-
-/* Hub class-specific descriptor is constructed dynamically */
-
-
-/*-------------------------------------------------------------------------*/
-
-#define OK(x) len = (x); break
-#ifdef DEBUG
-#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);}
-#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);}
-#else
-#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status)
-#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1])
-#endif
-#define RD_RH_STAT roothub_status(&gohci)
-#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1)
-
-/* request to virtual root hub */
-
-int rh_check_port_status(ohci_t *controller)
-{
- __u32 temp, ndp, i;
- int res;
-
- res = -1;
- temp = roothub_a (controller);
- ndp = (temp & RH_A_NDP);
- for (i = 0; i < ndp; i++) {
- temp = roothub_portstatus (controller, i);
- /* check for a device disconnect */
- if (((temp & (RH_PS_PESC | RH_PS_CSC)) ==
- (RH_PS_PESC | RH_PS_CSC)) &&
- ((temp & RH_PS_CCS) == 0)) {
- res = i;
- break;
- }
- }
- return res;
-}
-
-static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
- void *buffer, int transfer_len, struct devrequest *cmd)
-{
- void * data = buffer;
- int leni = transfer_len;
- int len = 0;
- int stat = 0;
- __u32 datab[4];
- __u8 *data_buf = (__u8 *)datab;
- __u16 bmRType_bReq;
- __u16 wValue;
- __u16 wIndex;
- __u16 wLength;
-
-#ifdef DEBUG
-urb_priv.actual_length = 0;
-pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe));
-#endif
- if (usb_pipeint(pipe)) {
- info("Root-Hub submit IRQ: NOT implemented");
- return 0;
- }
-
- bmRType_bReq = cmd->requesttype | (cmd->request << 8);
- wValue = m16_swap (cmd->value);
- wIndex = m16_swap (cmd->index);
- wLength = m16_swap (cmd->length);
-
- info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x",
- dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength);
-
- switch (bmRType_bReq) {
- /* Request Destination:
- without flags: Device,
- RH_INTERFACE: interface,
- RH_ENDPOINT: endpoint,
- RH_CLASS means HUB here,
- RH_OTHER | RH_CLASS almost ever means HUB_PORT here
- */
-
- case RH_GET_STATUS:
- *(__u16 *) data_buf = m16_swap (1); OK (2);
- case RH_GET_STATUS | RH_INTERFACE:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_ENDPOINT:
- *(__u16 *) data_buf = m16_swap (0); OK (2);
- case RH_GET_STATUS | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (
- RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE));
- OK (4);
- case RH_GET_STATUS | RH_OTHER | RH_CLASS:
- *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4);
-
- case RH_CLEAR_FEATURE | RH_ENDPOINT:
- switch (wValue) {
- case (RH_ENDPOINT_STALL): OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_CLASS:
- switch (wValue) {
- case RH_C_HUB_LOCAL_POWER:
- OK(0);
- case (RH_C_HUB_OVER_CURRENT):
- WR_RH_STAT(RH_HS_OCIC); OK (0);
- }
- break;
-
- case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_CCS ); OK (0);
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_POCI); OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_LSDA); OK (0);
- case (RH_C_PORT_CONNECTION):
- WR_RH_PORTSTAT (RH_PS_CSC ); OK (0);
- case (RH_C_PORT_ENABLE):
- WR_RH_PORTSTAT (RH_PS_PESC); OK (0);
- case (RH_C_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSSC); OK (0);
- case (RH_C_PORT_OVER_CURRENT):
- WR_RH_PORTSTAT (RH_PS_OCIC); OK (0);
- case (RH_C_PORT_RESET):
- WR_RH_PORTSTAT (RH_PS_PRSC); OK (0);
- }
- break;
-
- case RH_SET_FEATURE | RH_OTHER | RH_CLASS:
- switch (wValue) {
- case (RH_PORT_SUSPEND):
- WR_RH_PORTSTAT (RH_PS_PSS ); OK (0);
- case (RH_PORT_RESET): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PRS);
- OK (0);
- case (RH_PORT_POWER):
- WR_RH_PORTSTAT (RH_PS_PPS ); OK (0);
- case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/
- if (RD_RH_PORTSTAT & RH_PS_CCS)
- WR_RH_PORTSTAT (RH_PS_PES );
- OK (0);
- }
- break;
-
- case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0);
-
- case RH_GET_DESCRIPTOR:
- switch ((wValue & 0xff00) >> 8) {
- case (0x01): /* device descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_dev_des),
- wLength));
- data_buf = root_hub_dev_des; OK(len);
- case (0x02): /* configuration descriptor */
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_config_des),
- wLength));
- data_buf = root_hub_config_des; OK(len);
- case (0x03): /* string descriptors */
- if(wValue==0x0300) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index0),
- wLength));
- data_buf = root_hub_str_index0;
- OK(len);
- }
- if(wValue==0x0301) {
- len = min_t(unsigned int,
- leni,
- min_t(unsigned int,
- sizeof (root_hub_str_index1),
- wLength));
- data_buf = root_hub_str_index1;
- OK(len);
- }
- default:
- stat = USB_ST_STALLED;
- }
- break;
-
- case RH_GET_DESCRIPTOR | RH_CLASS:
- {
- __u32 temp = roothub_a (&gohci);
-
- data_buf [0] = 9; /* min length; */
- data_buf [1] = 0x29;
- data_buf [2] = temp & RH_A_NDP;
- data_buf [3] = 0;
- if (temp & RH_A_PSM) /* per-port power switching? */
- data_buf [3] |= 0x1;
- if (temp & RH_A_NOCP) /* no overcurrent reporting? */
- data_buf [3] |= 0x10;
- else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */
- data_buf [3] |= 0x8;
-
- /* corresponds to data_buf[4-7] */
- datab [1] = 0;
- data_buf [5] = (temp & RH_A_POTPGT) >> 24;
- temp = roothub_b (&gohci);
- data_buf [7] = temp & RH_B_DR;
- if (data_buf [2] < 7) {
- data_buf [8] = 0xff;
- } else {
- data_buf [0] += 2;
- data_buf [8] = (temp & RH_B_DR) >> 8;
- data_buf [10] = data_buf [9] = 0xff;
- }
-
- len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
- OK (len);
- }
-
- case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1);
-
- case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0);
-
- default:
- dbg ("unsupported root hub command");
- stat = USB_ST_STALLED;
- }
-
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
-
- len = min_t(int, len, leni);
- if (data != data_buf)
- memcpy (data, data_buf, len);
- dev->act_len = len;
- dev->status = stat;
-
-#ifdef DEBUG
- if (transfer_len)
- urb_priv.actual_length = transfer_len;
- pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/);
-#endif
-
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* common code for handling submit messages - used for all but root hub */
-/* accesses. */
-int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup, int interval)
-{
- int stat = 0;
- int maxsize = usb_maxpacket(dev, pipe);
- int timeout;
-
- /* device pulled? Shortcut the action. */
- if (devgone == dev) {
- dev->status = USB_ST_CRC_ERR;
- return 0;
- }
-
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_common_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
-
- if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) {
- err("sohci_submit_job failed");
- return -1;
- }
-
- /* allow more time for a BULK device to react - some are slow */
-#define BULK_TO 5000 /* timeout in milliseconds */
- if (usb_pipebulk(pipe))
- timeout = BULK_TO;
- else
- timeout = 100;
-
- /* wait for it to complete */
- for (;;) {
- /* check whether the controller is done */
- stat = hc_interrupt();
- if (stat < 0) {
- stat = USB_ST_CRC_ERR;
- break;
- }
-
- /* NOTE: since we are not interrupt driven in U-Boot and always
- * handle only one URB at a time, we cannot assume the
- * transaction finished on the first successful return from
- * hc_interrupt().. unless the flag for current URB is set,
- * meaning that all TD's to/from device got actually
- * transferred and processed. If the current URB is not
- * finished we need to re-iterate this loop so as
- * hc_interrupt() gets called again as there needs to be some
- * more TD's to process still */
- if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
- /* 0xff is returned for an SF-interrupt */
- break;
- }
-
- if (--timeout) {
- wait_ms(1);
- if (!urb_finished)
- dbg("\%");
-
- } else {
- err("CTL:TIMEOUT ");
- dbg("submit_common_msg: TO status %x\n", stat);
- stat = USB_ST_CRC_ERR;
- urb_finished = 1;
- break;
- }
- }
-#if 0
- /* we got an Root Hub Status Change interrupt */
- if (got_rhsc) {
-#ifdef DEBUG
- ohci_dump_roothub (&gohci, 1);
-#endif
- got_rhsc = 0;
- /* abuse timeout */
- timeout = rh_check_port_status(&gohci);
- if (timeout >= 0) {
-#if 0 /* this does nothing useful, but leave it here in case that changes */
- /* the called routine adds 1 to the passed value */
- usb_hub_port_connect_change(gohci.rh.dev, timeout - 1);
-#endif
- /*
- * XXX
- * This is potentially dangerous because it assumes
- * that only one device is ever plugged in!
- */
- devgone = dev;
- }
- }
-#endif
-
- dev->status = stat;
- dev->act_len = transfer_len;
-
-#ifdef DEBUG
- pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe));
-#endif
-
- /* free TDs in urb_priv */
- urb_free_priv (&urb_priv);
- return 0;
-}
-
-/* submit routines called from usb.c */
-int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len)
-{
- info("submit_bulk_msg");
- return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0);
-}
-
-int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, struct devrequest *setup)
-{
- int maxsize = usb_maxpacket(dev, pipe);
-
- info("submit_control_msg");
-#ifdef DEBUG
- urb_priv.actual_length = 0;
- pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe));
-#endif
- if (!maxsize) {
- err("submit_control_message: pipesize for pipe %lx is zero",
- pipe);
- return -1;
- }
- if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) {
- gohci.rh.dev = dev;
- /* root hub - redirect */
- return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len,
- setup);
- }
-
- return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0);
-}
-
-int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
- int transfer_len, int interval)
-{
- info("submit_int_msg");
- return -1;
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-/* reset the HC and BUS */
-
-static int hc_reset (ohci_t *ohci)
-{
- int timeout = 30;
- int smm_timeout = 50; /* 0,5 sec */
-
- if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */
- writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */
- info("USB HC TakeOver from SMM");
- while (readl (&ohci->regs->control) & OHCI_CTRL_IR) {
- wait_ms (10);
- if (--smm_timeout == 0) {
- err("USB HC TakeOver failed!");
- return -1;
- }
- }
- }
-
- /* Disable HC interrupts */
- writel (OHCI_INTR_MIE, &ohci->regs->intrdisable);
-
- dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;",
- ohci->slot_name,
- readl (&ohci->regs->control));
-
- /* Reset USB (needed by some controllers) */
- ohci->hc_control = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* HC Reset requires max 10 us delay */
- writel (OHCI_HCR, &ohci->regs->cmdstatus);
- while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) {
- if (--timeout == 0) {
- err("USB HC reset timed out!");
- return -1;
- }
- udelay (1);
- }
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * enable interrupts
- * connect the virtual root hub */
-
-static int hc_start (ohci_t * ohci)
-{
- __u32 mask;
- unsigned int fminterval;
-
- ohci->disabled = 1;
-
- /* Tell the controller where the control and bulk lists are
- * The lists are empty now. */
-
- writel (0, &ohci->regs->ed_controlhead);
- writel (0, &ohci->regs->ed_bulkhead);
-
- writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */
-
- fminterval = 0x2edf;
- writel ((fminterval * 9) / 10, &ohci->regs->periodicstart);
- fminterval |= ((((fminterval - 210) * 6) / 7) << 16);
- writel (fminterval, &ohci->regs->fminterval);
- writel (0x628, &ohci->regs->lsthresh);
-
- /* start controller operations */
- ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER;
- ohci->disabled = 0;
- writel (ohci->hc_control, &ohci->regs->control);
-
- /* disable all interrupts */
- mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD |
- OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC |
- OHCI_INTR_OC | OHCI_INTR_MIE);
- writel (mask, &ohci->regs->intrdisable);
- /* clear all interrupts */
- mask &= ~OHCI_INTR_MIE;
- writel (mask, &ohci->regs->intrstatus);
- /* Choose the interrupts we care about now - but w/o MIE */
- mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO;
- writel (mask, &ohci->regs->intrenable);
-
-#ifdef OHCI_USE_NPS
- /* required for AMD-756 and some Mac platforms */
- writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM,
- &ohci->regs->roothub.a);
- writel (RH_HS_LPSC, &ohci->regs->roothub.status);
-#endif /* OHCI_USE_NPS */
-
-#define mdelay(n) ({unsigned long msec=(n); while (msec--) udelay(1000);})
- /* POTPGT delay is bits 24-31, in 2 ms units. */
- mdelay ((roothub_a (ohci) >> 23) & 0x1fe);
-
- /* connect the virtual root hub */
- ohci->rh.devnum = 0;
-
- return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static int
-hc_interrupt (void)
-{
- ohci_t *ohci = &gohci;
- struct ohci_regs *regs = ohci->regs;
- int ints;
- int stat = -1;
-
- if ((ohci->hcca->done_head != 0) &&
- !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) {
-
- ints = OHCI_INTR_WDH;
-
- } else if ((ints = readl (&regs->intrstatus)) == ~(u32)0) {
- ohci->disabled++;
- err ("%s device removed!", ohci->slot_name);
- return -1;
-
- } else if ((ints &= readl (&regs->intrenable)) == 0) {
- dbg("hc_interrupt: returning..\n");
- return 0xff;
- }
-
- /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
-
- if (ints & OHCI_INTR_RHSC) {
- got_rhsc = 1;
- stat = 0xff;
- }
-
- if (ints & OHCI_INTR_UE) {
- ohci->disabled++;
- err ("OHCI Unrecoverable Error, controller usb-%s disabled",
- ohci->slot_name);
- /* e.g. due to PCI Master/Target Abort */
-
-#ifdef DEBUG
- ohci_dump (ohci, 1);
-#endif
- /* FIXME: be optimistic, hope that bug won't repeat often. */
- /* Make some non-interrupt context restart the controller. */
- /* Count and limit the retries though; either hardware or */
- /* software errors can go forever... */
- hc_reset (ohci);
- return -1;
- }
-
- if (ints & OHCI_INTR_WDH) {
- writel (OHCI_INTR_WDH, &regs->intrdisable);
- stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci));
- writel (OHCI_INTR_WDH, &regs->intrenable);
- }
-
- if (ints & OHCI_INTR_SO) {
- dbg("USB Schedule overrun\n");
- writel (OHCI_INTR_SO, &regs->intrenable);
- stat = -1;
- }
-
- /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */
- if (ints & OHCI_INTR_SF) {
- unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1;
- wait_ms(1);
- writel (OHCI_INTR_SF, &regs->intrdisable);
- if (ohci->ed_rm_list[frame] != NULL)
- writel (OHCI_INTR_SF, &regs->intrenable);
- stat = 0xff;
- }
-
- writel (ints, &regs->intrstatus);
- return stat;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*-------------------------------------------------------------------------*/
-
-/* De-allocate all resources.. */
-
-static void hc_release_ohci (ohci_t *ohci)
-{
- dbg ("USB HC release ohci usb-%s", ohci->slot_name);
-
- if (!ohci->disabled)
- hc_reset (ohci);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * low level initalisation routine, called from usb.c
- */
-static char ohci_inited = 0;
-
-int usb_lowlevel_init(void)
-{
- memset (&gohci, 0, sizeof (ohci_t));
- memset (&urb_priv, 0, sizeof (urb_priv_t));
-
- /* align the storage */
- if ((__u32)&ghcca[0] & 0xff) {
- err("HCCA not aligned!!");
- return -1;
- }
- phcca = &ghcca[0];
- info("aligned ghcca %p", phcca);
- memset(&ohci_dev, 0, sizeof(struct ohci_device));
- if ((__u32)&ohci_dev.ed[0] & 0x7) {
- err("EDs not aligned!!");
- return -1;
- }
- memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1));
- if ((__u32)gtd & 0x7) {
- err("TDs not aligned!!");
- return -1;
- }
- ptd = gtd;
- gohci.hcca = phcca;
- memset (phcca, 0, sizeof (struct ohci_hcca));
-
- gohci.disabled = 1;
- gohci.sleeping = 0;
- gohci.irq = -1;
-#if defined(CONFIG_440EP)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
- gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
-#endif
-
- gohci.flags = 0;
- gohci.slot_name = "ppc440";
-
- if (hc_reset (&gohci) < 0) {
- hc_release_ohci (&gohci);
- return -1;
- }
-
- if (hc_start (&gohci) < 0) {
- err ("can't start usb-%s", gohci.slot_name);
- hc_release_ohci (&gohci);
- return -1;
- }
-
-#ifdef DEBUG
- ohci_dump (&gohci, 1);
-#endif
- ohci_inited = 1;
- urb_finished = 1;
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
- /* init the device driver */
- usb_dev_init();
-#endif
-
- return 0;
-}
-
-int usb_lowlevel_stop(void)
-{
- /* this gets called really early - before the controller has */
- /* even been initialized! */
- if (!ohci_inited)
- return 0;
- /* TODO release any interrupts, etc. */
- /* call hc_release_ohci() here ? */
- hc_reset (&gohci);
- return 0;
-}
-
-#endif /* CONFIG_USB_OHCI */
diff --git a/cpu/ppc4xx/usb_ohci.h b/cpu/ppc4xx/usb_ohci.h
deleted file mode 100644
index 2c3dc4f..0000000
--- a/cpu/ppc4xx/usb_ohci.h
+++ /dev/null
@@ -1,410 +0,0 @@
-/*
- * URB OHCI HCD (Host Controller Driver) for USB.
- *
- * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- * (C) Copyright 2000-2001 David Brownell <dbrownell@users.sourceforge.net>
- *
- * usb-ohci.h
- */
-
-static int cc_to_error[16] = {
-
-/* mapping of the OHCI CC status to error codes */
- /* No Error */ 0,
- /* CRC Error */ USB_ST_CRC_ERR,
- /* Bit Stuff */ USB_ST_BIT_ERR,
- /* Data Togg */ USB_ST_CRC_ERR,
- /* Stall */ USB_ST_STALLED,
- /* DevNotResp */ -1,
- /* PIDCheck */ USB_ST_BIT_ERR,
- /* UnExpPID */ USB_ST_BIT_ERR,
- /* DataOver */ USB_ST_BUF_ERR,
- /* DataUnder */ USB_ST_BUF_ERR,
- /* reservd */ -1,
- /* reservd */ -1,
- /* BufferOver */ USB_ST_BUF_ERR,
- /* BuffUnder */ USB_ST_BUF_ERR,
- /* Not Access */ -1,
- /* Not Access */ -1
-};
-
-/* ED States */
-
-#define ED_NEW 0x00
-#define ED_UNLINK 0x01
-#define ED_OPER 0x02
-#define ED_DEL 0x04
-#define ED_URB_DEL 0x08
-
-/* usb_ohci_ed */
-struct ed {
- __u32 hwINFO;
- __u32 hwTailP;
- __u32 hwHeadP;
- __u32 hwNextED;
-
- struct ed *ed_prev;
- __u8 int_period;
- __u8 int_branch;
- __u8 int_load;
- __u8 int_interval;
- __u8 state;
- __u8 type;
- __u16 last_iso;
- struct ed *ed_rm_list;
-
- struct usb_device *usb_dev;
- __u32 unused[3];
-} __attribute__((aligned(16)));
-typedef struct ed ed_t;
-
-/* TD info field */
-#define TD_CC 0xf0000000
-#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f)
-#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28)
-#define TD_EC 0x0C000000
-#define TD_T 0x03000000
-#define TD_T_DATA0 0x02000000
-#define TD_T_DATA1 0x03000000
-#define TD_T_TOGGLE 0x00000000
-#define TD_R 0x00040000
-#define TD_DI 0x00E00000
-#define TD_DI_SET(X) (((X) & 0x07)<< 21)
-#define TD_DP 0x00180000
-#define TD_DP_SETUP 0x00000000
-#define TD_DP_IN 0x00100000
-#define TD_DP_OUT 0x00080000
-
-#define TD_ISO 0x00010000
-#define TD_DEL 0x00020000
-
-/* CC Codes */
-#define TD_CC_NOERROR 0x00
-#define TD_CC_CRC 0x01
-#define TD_CC_BITSTUFFING 0x02
-#define TD_CC_DATATOGGLEM 0x03
-#define TD_CC_STALL 0x04
-#define TD_DEVNOTRESP 0x05
-#define TD_PIDCHECKFAIL 0x06
-#define TD_UNEXPECTEDPID 0x07
-#define TD_DATAOVERRUN 0x08
-#define TD_DATAUNDERRUN 0x09
-#define TD_BUFFEROVERRUN 0x0C
-#define TD_BUFFERUNDERRUN 0x0D
-#define TD_NOTACCESSED 0x0F
-
-#define MAXPSW 1
-
-struct td {
- __u32 hwINFO;
- __u32 hwCBP; /* Current Buffer Pointer */
- __u32 hwNextTD; /* Next TD Pointer */
- __u32 hwBE; /* Memory Buffer End Pointer */
-
- __u16 hwPSW[MAXPSW];
- __u8 unused;
- __u8 index;
- struct ed *ed;
- struct td *next_dl_td;
- struct usb_device *usb_dev;
- int transfer_len;
- __u32 data;
-
- __u32 unused2[2];
-} __attribute__((aligned(32)));
-typedef struct td td_t;
-
-#define OHCI_ED_SKIP (1 << 14)
-
-/*
- * The HCCA (Host Controller Communications Area) is a 256 byte
- * structure defined in the OHCI spec. that the host controller is
- * told the base address of. It must be 256-byte aligned.
- */
-
-#define NUM_INTS 32 /* part of the OHCI standard */
-struct ohci_hcca {
- __u32 int_table[NUM_INTS]; /* Interrupt ED table */
-#if defined(CONFIG_MPC5200)
- __u16 pad1; /* set to 0 on each frame_no change */
- __u16 frame_no; /* current frame number */
-#else
- __u16 frame_no; /* current frame number */
- __u16 pad1; /* set to 0 on each frame_no change */
-#endif
- __u32 done_head; /* info returned for an interrupt */
- u8 reserved_for_hc[116];
-} __attribute__((aligned(256)));
-
-/*
- * Maximum number of root hub ports.
- */
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O
- * region. This is Memory Mapped I/O. You must use the readl() and
- * writel() macros defined in asm/io.h to access these!!
- */
-struct ohci_regs {
- /* control and status registers */
- __u32 revision;
- __u32 control;
- __u32 cmdstatus;
- __u32 intrstatus;
- __u32 intrenable;
- __u32 intrdisable;
- /* memory pointers */
- __u32 hcca;
- __u32 ed_periodcurrent;
- __u32 ed_controlhead;
- __u32 ed_controlcurrent;
- __u32 ed_bulkhead;
- __u32 ed_bulkcurrent;
- __u32 donehead;
- /* frame counters */
- __u32 fminterval;
- __u32 fmremaining;
- __u32 fmnumber;
- __u32 periodicstart;
- __u32 lsthresh;
- /* Root hub ports */
- struct ohci_roothub_regs {
- __u32 a;
- __u32 b;
- __u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
- } roothub;
-} __attribute__((aligned(32)));
-
-/* OHCI CONTROL AND STATUS REGISTER MASKS */
-
-/*
- * HcControl (control) register masks
- */
-#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */
-#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */
-#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */
-#define OHCI_CTRL_CLE (1 << 4) /* control list enable */
-#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */
-#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */
-#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */
-#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */
-#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */
-
-/* pre-shifted values for HCFS */
-# define OHCI_USB_RESET (0 << 6)
-# define OHCI_USB_RESUME (1 << 6)
-# define OHCI_USB_OPER (2 << 6)
-# define OHCI_USB_SUSPEND (3 << 6)
-
-/*
- * HcCommandStatus (cmdstatus) register masks
- */
-#define OHCI_HCR (1 << 0) /* host controller reset */
-#define OHCI_CLF (1 << 1) /* control list filled */
-#define OHCI_BLF (1 << 2) /* bulk list filled */
-#define OHCI_OCR (1 << 3) /* ownership change request */
-#define OHCI_SOC (3 << 16) /* scheduling overrun count */
-
-/*
- * masks used with interrupt registers:
- * HcInterruptStatus (intrstatus)
- * HcInterruptEnable (intrenable)
- * HcInterruptDisable (intrdisable)
- */
-#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */
-#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */
-#define OHCI_INTR_SF (1 << 2) /* start frame */
-#define OHCI_INTR_RD (1 << 3) /* resume detect */
-#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */
-#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */
-#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */
-#define OHCI_INTR_OC (1 << 30) /* ownership change */
-#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */
-
-/* Virtual Root HUB */
-struct virt_root_hub {
- int devnum; /* Address of Root Hub endpoint */
- void *dev; /* was urb */
- void *int_addr;
- int send;
- int interval;
-};
-
-/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */
-
-/* destination of request */
-#define RH_INTERFACE 0x01
-#define RH_ENDPOINT 0x02
-#define RH_OTHER 0x03
-
-#define RH_CLASS 0x20
-#define RH_VENDOR 0x40
-
-/* Requests: bRequest << 8 | bmRequestType */
-#define RH_GET_STATUS 0x0080
-#define RH_CLEAR_FEATURE 0x0100
-#define RH_SET_FEATURE 0x0300
-#define RH_SET_ADDRESS 0x0500
-#define RH_GET_DESCRIPTOR 0x0680
-#define RH_SET_DESCRIPTOR 0x0700
-#define RH_GET_CONFIGURATION 0x0880
-#define RH_SET_CONFIGURATION 0x0900
-#define RH_GET_STATE 0x0280
-#define RH_GET_INTERFACE 0x0A80
-#define RH_SET_INTERFACE 0x0B00
-#define RH_SYNC_FRAME 0x0C80
-/* Our Vendor Specific Request */
-#define RH_SET_EP 0x2000
-
-/* Hub port features */
-#define RH_PORT_CONNECTION 0x00
-#define RH_PORT_ENABLE 0x01
-#define RH_PORT_SUSPEND 0x02
-#define RH_PORT_OVER_CURRENT 0x03
-#define RH_PORT_RESET 0x04
-#define RH_PORT_POWER 0x08
-#define RH_PORT_LOW_SPEED 0x09
-
-#define RH_C_PORT_CONNECTION 0x10
-#define RH_C_PORT_ENABLE 0x11
-#define RH_C_PORT_SUSPEND 0x12
-#define RH_C_PORT_OVER_CURRENT 0x13
-#define RH_C_PORT_RESET 0x14
-
-/* Hub features */
-#define RH_C_HUB_LOCAL_POWER 0x00
-#define RH_C_HUB_OVER_CURRENT 0x01
-
-#define RH_DEVICE_REMOTE_WAKEUP 0x00
-#define RH_ENDPOINT_STALL 0x01
-
-#define RH_ACK 0x01
-#define RH_REQ_ERR -1
-#define RH_NACK 0x00
-
-/* OHCI ROOT HUB REGISTER MASKS */
-
-/* roothub.portstatus [i] bits */
-#define RH_PS_CCS 0x00000001 /* current connect status */
-#define RH_PS_PES 0x00000002 /* port enable status */
-#define RH_PS_PSS 0x00000004 /* port suspend status */
-#define RH_PS_POCI 0x00000008 /* port over current indicator */
-#define RH_PS_PRS 0x00000010 /* port reset status */
-#define RH_PS_PPS 0x00000100 /* port power status */
-#define RH_PS_LSDA 0x00000200 /* low speed device attached */
-#define RH_PS_CSC 0x00010000 /* connect status change */
-#define RH_PS_PESC 0x00020000 /* port enable status change */
-#define RH_PS_PSSC 0x00040000 /* port suspend status change */
-#define RH_PS_OCIC 0x00080000 /* over current indicator change */
-#define RH_PS_PRSC 0x00100000 /* port reset status change */
-
-/* roothub.status bits */
-#define RH_HS_LPS 0x00000001 /* local power status */
-#define RH_HS_OCI 0x00000002 /* over current indicator */
-#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */
-#define RH_HS_LPSC 0x00010000 /* local power status change */
-#define RH_HS_OCIC 0x00020000 /* over current indicator change */
-#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */
-
-/* roothub.b masks */
-#define RH_B_DR 0x0000ffff /* device removable flags */
-#define RH_B_PPCM 0xffff0000 /* port power control mask */
-
-/* roothub.a masks */
-#define RH_A_NDP (0xff << 0) /* number of downstream ports */
-#define RH_A_PSM (1 << 8) /* power switching mode */
-#define RH_A_NPS (1 << 9) /* no power switching */
-#define RH_A_DT (1 << 10) /* device type (mbz) */
-#define RH_A_OCPM (1 << 11) /* over current protection mode */
-#define RH_A_NOCP (1 << 12) /* no over current protection */
-#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
-
-/* urb */
-#define N_URB_TD 48
-typedef struct {
- ed_t *ed;
- __u16 length; /* number of tds associated with this request */
- __u16 td_cnt; /* number of tds already serviced */
- int state;
- unsigned long pipe;
- int actual_length;
- td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */
-} urb_priv_t;
-#define URB_DEL 1
-
-/*
- * This is the full ohci controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-typedef struct ohci {
- struct ohci_hcca *hcca; /* hcca */
- /*dma_addr_t hcca_dma; */
-
- int irq;
- int disabled; /* e.g. got a UE, we're hung */
- int sleeping;
- unsigned long flags; /* for HC bugs */
-
- struct ohci_regs *regs; /* OHCI controller's memory */
-
- ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */
- ed_t *ed_bulktail; /* last endpoint of bulk list */
- ed_t *ed_controltail; /* last endpoint of control list */
- int intrstatus;
- __u32 hc_control; /* copy of the hc control reg */
- struct usb_device *dev[32];
- struct virt_root_hub rh;
-
- const char *slot_name;
-} ohci_t;
-
-#define NUM_EDS 8 /* num of preallocated endpoint descriptors */
-
-struct ohci_device {
- ed_t ed[NUM_EDS];
- int ed_cnt;
-};
-
-/* hcd */
-/* endpoint */
-static int ep_link(ohci_t * ohci, ed_t * ed);
-static int ep_unlink(ohci_t * ohci, ed_t * ed);
-static ed_t *ep_add_ed(struct usb_device *usb_dev, unsigned long pipe);
-
-/*-------------------------------------------------------------------------*/
-
-/* we need more TDs than EDs */
-#define NUM_TD 64
-
-/* +1 so we can align the storage */
-td_t gtd[NUM_TD + 1];
-/* pointers to aligned storage */
-td_t *ptd;
-
-/* TDs ... */
-static inline struct td *td_alloc(struct usb_device *usb_dev)
-{
- int i;
- struct td *td;
-
- td = NULL;
- for (i = 0; i < NUM_TD; i++) {
- if (ptd[i].usb_dev == NULL) {
- td = &ptd[i];
- td->usb_dev = usb_dev;
- break;
- }
- }
-
- return td;
-}
-
-static inline void ed_free(struct ed *ed)
-{
- ed->usb_dev = NULL;
-}
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
deleted file mode 100644
index fe398af..0000000
--- a/cpu/ppc4xx/usbdev.c
+++ /dev/null
@@ -1,230 +0,0 @@
-/*USB 1.1,2.0 device*/
-
-#include <common.h>
-#include <asm/processor.h>
-
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
-
-#include <usb.h>
-#include <asm/ppc4xx-uic.h>
-#include "usbdev.h"
-
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-
-int set_value = -1;
-
-void process_endpoints(unsigned short usb2d0_intrin)
-{
- /*will hold the packet received */
- struct usb_device_descriptor usb_device_packet;
- struct usb_configuration_descriptor usb_config_packet;
- struct usb_string_descriptor usb_string_packet;
- struct devrequest setup_packet;
- unsigned int *setup_packet_pt;
- unsigned char *packet_pt = NULL;
- int temp, temp1;
-
- int i;
-
- /*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
-
- /*set usb address, seems to not work unless it is done in the next
- interrupt, so that is why it is done this way */
- if (set_value != -1)
- *(unsigned char *)USB2D0_FADDR_8 = (unsigned char)set_value;
-
- /*endpoint 1 */
- if (usb2d0_intrin & 0x01) {
- setup_packet_pt = (unsigned int *)&setup_packet;
-
- /*copy packet */
- setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
- setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
- temp = *(unsigned int *)USB2D0_FIFO_0;
- temp1 = *(unsigned int *)USB2D0_FIFO_0;
-
- /*do some swapping */
- setup_packet.value = swap_16(setup_packet.value);
- setup_packet.index = swap_16(setup_packet.index);
- setup_packet.length = swap_16(setup_packet.length);
-
- /*clear rx packet */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x48;
-
- /*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
- setup_packet.request, setup_packet.value,
- setup_packet.index, setup_packet.length, temp, temp1 ); */
-
- switch (setup_packet.request) {
- case USB_REQ_GET_DESCRIPTOR:
-
- switch (setup_packet.value >> 8) {
- case USB_DT_DEVICE:
- /*create packet */
- usb_device_packet.bLength = 18;
- usb_device_packet.bDescriptorType =
- USB_DT_DEVICE;
-#ifdef USB_2_0_DEVICE
- usb_device_packet.bcdUSB = swap_16(0x200);
-#else
- usb_device_packet.bcdUSB = swap_16(0x110);
-#endif
- usb_device_packet.bDeviceClass = 0xff;
- usb_device_packet.bDeviceSubClass = 0;
- usb_device_packet.bDeviceProtocol = 0;
- usb_device_packet.bMaxPacketSize0 = 32;
- usb_device_packet.idVendor = swap_16(1);
- usb_device_packet.idProduct = swap_16(2);
- usb_device_packet.bcdDevice = swap_16(0x300);
- usb_device_packet.iManufacturer = 1;
- usb_device_packet.iProduct = 1;
- usb_device_packet.iSerialNumber = 1;
- usb_device_packet.bNumConfigurations = 1;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_device_packet;
- break;
-
- case USB_DT_CONFIG:
- /*create packet */
- usb_config_packet.bLength = 9;
- usb_config_packet.bDescriptorType =
- USB_DT_CONFIG;
- usb_config_packet.wTotalLength = swap_16(25);
- usb_config_packet.bNumInterfaces = 1;
- usb_config_packet.bConfigurationValue = 1;
- usb_config_packet.iConfiguration = 0;
- usb_config_packet.bmAttributes = 0x40;
- usb_config_packet.bMaxPower = 0;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_config_packet;
- break;
-
- case USB_DT_STRING:
- /*create packet */
- usb_string_packet.bLength = 2;
- usb_string_packet.bDescriptorType =
- USB_DT_STRING;
- usb_string_packet.wData[0] = 0x0094;
-
- /*put packet in fifo */
- packet_pt = (unsigned char *)&usb_string_packet;
- break;
- }
-
- /*put packet in fifo */
- for (i = 0; i < (setup_packet.length); i++) {
- *(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
- }
-
- /*give tx command */
- *(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
-
- break;
-
- case USB_REQ_SET_ADDRESS:
-
- /*copy usb address */
- set_value = setup_packet.value;
-
- break;
- }
-
- }
-}
-
-void process_other(unsigned char usb2d0_intrusb)
-{
-
- /*check for sof */
- if (usb2d0_intrusb & 0x08) {
- /*printf("{USB device} - sof detected\n"); */
- }
-
- /*check for reset */
- if (usb2d0_intrusb & 0x04) {
- /*printf("{USB device} - reset detected\n"); */
-
- /*copy usb address of zero, need to do this when usb reset */
- set_value = 0;
- }
-
- if (usb2d0_intrusb & 0x02) {
- /*printf("{USB device} - resume detected\n"); */
- }
-
- if (usb2d0_intrusb & 0x01) {
- /*printf("{USB device} - suspend detected\n"); */
- }
-}
-
-int usbInt(void)
-{
- /*Must read these 2 registers and use values to clear interrupts. If you
- do not read them then the interrupt will not be cleared. If you do not
- use the variable the optimizer will not do a read. */
- volatile unsigned short usb2d0_intrin =
- *(unsigned short *)USB2D0_INTRIN_16;
- volatile unsigned char usb2d0_intrusb =
- *(unsigned char *)USB2D0_INTRUSB_8;
-
- /*check if there was an endpoint interrupt */
- if (usb2d0_intrin != 0) {
- process_endpoints(usb2d0_intrin);
- }
-
- /*check for other interrupts */
- if (usb2d0_intrusb != 0) {
- process_other(usb2d0_intrusb);
- }
-
- return 0;
-}
-
-#if defined(CONFIG_440EPX)
-void usb_dev_init()
-{
- printf("USB 2.0 Device init\n");
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#else
-void usb_dev_init()
-{
-#ifdef USB_2_0_DEVICE
- printf("USB 2.0 Device init\n");
- /*select 2.0 device */
- mtsdr(SDR0_USB0, 0x0); /* 2.0 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xa1; /* 2.0 */
-#else
- printf("USB 1.1 Device init\n");
- /*select 1.1 device */
- mtsdr(SDR0_USB0, 0x2); /* 1.1 */
-
- /*usb dev init */
- *(unsigned char *)USB2D0_POWER_8 = 0xc0; /* 1.1 */
-#endif
-
- /*enable interrupts */
- *(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
-
- irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
- NULL);
-}
-#endif
-
-#endif /* CONFIG_440EP || CONFIG_440EPX */
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
deleted file mode 100644
index ef6a2da..0000000
--- a/cpu/ppc4xx/usbdev.h
+++ /dev/null
@@ -1,31 +0,0 @@
-#include <config.h>
-
-/*Common Registers*/
-#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
-#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
-#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
-#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
-#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
-#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
-#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
-#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
-#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
-#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
-#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
-
-/*Indexed Registers*/
-#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
-#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
-#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
-#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
-#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
-#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
-
-/*FIFOs*/
-#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
-#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
-#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
-#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
-
-void usb_dev_init(void);
diff --git a/cpu/ppc4xx/xilinx_irq.c b/cpu/ppc4xx/xilinx_irq.c
deleted file mode 100644
index 7108777..0000000
--- a/cpu/ppc4xx/xilinx_irq.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * (C) Copyright 2008
- * Ricado Ribalda-Universidad Autonoma de Madrid-ricardo.ribalda@uam.es
- * This work has been supported by: QTechnology http://qtec.com/
- * Based on interrupts.c Wolfgang Denk-DENX Software Engineering-wd@denx.de
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
-*/
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <asm/processor.h>
-#include <asm/interrupt.h>
-#include <ppc4xx.h>
-#include <ppc_asm.tmpl>
-#include <commproc.h>
-#include <asm/io.h>
-#include <asm/xilinx_irq.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void pic_enable(void)
-{
- debug("Xilinx PIC at 0x%8x\n", intc);
-
- /*
- * Disable all external interrupts until they are
- * explicitly requested.
- */
- out_be32((u32 *) IER, 0);
-
- /* Acknowledge any pending interrupts just in case. */
- out_be32((u32 *) IAR, 0xffffffff);
-
- /* Turn on the Master Enable. */
- out_be32((u32 *) MER, 0x3UL);
-
- return;
-}
-
-int xilinx_pic_irq_get(void)
-{
- u32 irq;
- irq = in_be32((u32 *) IVR);
-
- /* If no interrupt is pending then all bits of the IVR are set to 1. As
- * the IVR is as many bits wide as numbers of inputs are available.
- * Therefore, if all bits of the IVR are set to one, its content will
- * be bigger than XPAR_INTC_MAX_NUM_INTR_INPUTS.
- */
- if (irq >= XPAR_INTC_MAX_NUM_INTR_INPUTS)
- irq = -1; /* report no pending interrupt. */
-
- debug("get_irq: %d\n", irq);
- return (irq);
-}
-
-void pic_irq_enable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("enable: %d\n", irq);
- out_be32((u32 *) SIE, mask);
-}
-
-void pic_irq_disable(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("disable: %d\n", irq);
- out_be32((u32 *) CIE, mask);
-}
-
-void pic_irq_ack(unsigned int irq)
-{
- u32 mask = IRQ_MASK(irq);
- debug("ack: %d\n", irq);
- out_be32((u32 *) IAR, mask);
-}
-
-void external_interrupt(struct pt_regs *regs)
-{
- int irq;
-
- irq = xilinx_pic_irq_get();
- if (irq < 0)
- return;
-
- interrupt_run_handler(irq);
-
- return;
-}