summaryrefslogtreecommitdiff
path: root/cpu
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2009-05-11 13:46:14 +0200
committerWolfgang Denk <wd@denx.de>2009-06-12 20:39:47 +0200
commitd873133f2ba9bd613d5f6552c31cc70fb13f15d3 (patch)
tree01a00655040050e5125ef15a24e01e605eb02ec6 /cpu
parent837db3d87f4bfe9261629fb4a1bb433506a3056a (diff)
downloadu-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.zip
u-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.tar.gz
u-boot-imx-d873133f2ba9bd613d5f6552c31cc70fb13f15d3.tar.bz2
ppc4xx: Add Sequoia RAM-booting target
This patch adds another build target for the AMCC Sequoia PPC440EPx eval board. This RAM-booting version is targeted for boards without NOR FLASH (NAND booting) which need a possibility to initially program their NAND FLASH. Using a JTAG debugger (e.g. BDI2000/3000) configured to setup the SDRAM, this debugger can load this RAM- booting image to the target address in SDRAM (in this case 0x1000000) and start it there. Then U-Boot's standard NAND commands can be used to program the NAND FLASH (e.g. "nand write ..."). Here the commands to load and start this image from the BDI2000: 440EPX>reset halt 440EPX>load 0x1000000 /tftpboot/sequoia/u-boot.bin 440EPX>go 0x1000000 Please note that this image automatically scans for an already initialized SDRAM TLB (detected by EPN=0). This TLB will not be cleared. This TLB doesn't need to be TLB #0, this RAM-booting version will detect it and preserve it. So booting via BDI2000 will work and booting with a complete different TLB init via U-Boot works as well. Signed-off-by: Stefan Roese <sr@denx.de>
Diffstat (limited to 'cpu')
-rw-r--r--cpu/ppc4xx/start.S33
1 files changed, 27 insertions, 6 deletions
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index f2b8908..ac96fc2 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -257,6 +257,14 @@
bl board_init_f
#endif
+#if defined(CONFIG_SYS_RAMBOOT)
+ /*
+ * 4xx RAM-booting U-Boot image is started from offset 0
+ */
+ .text
+ bl _start_440
+#endif
+
/*
* 440 Startup -- on reset only the top 4k of the effective
* address space is mapped in by an entry in the instruction
@@ -444,10 +452,17 @@ skip_debug_init:
addis r0,0,0x0000
li r1,0x003f /* 64 TLB entries */
mtctr r1
-rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
- tlbwe r0,r1,0x0001
- tlbwe r0,r1,0x0002
- subi r1,r1,0x0001
+ li r4,0 /* Start with TLB #0 */
+rsttlb:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
+ rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
+ beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
+#endif
+ tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
+ tlbwe r0,r4,1
+ tlbwe r0,r4,2
+tlbnxt: addi r4,r4,1 /* Next TLB */
bdnz rsttlb
/*----------------------------------------------------------------*/
@@ -476,7 +491,13 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
li r4,0 /* TLB # */
addi r5,r5,-4
-1: lwzu r0,4(r5)
+1:
+#ifdef CONFIG_SYS_RAMBOOT
+ tlbre r3,r4,0 /* Read contents from TLB word #0 */
+ rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
+ bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
+#endif
+ lwzu r0,4(r5)
cmpwi r0,0
beq 2f /* 0 marks end */
lwzu r1,4(r5)
@@ -484,7 +505,7 @@ rsttlb: tlbwe r0,r1,0x0000 /* Invalidate all entries (V=0)*/
tlbwe r0,r4,0 /* TLB Word 0 */
tlbwe r1,r4,1 /* TLB Word 1 */
tlbwe r2,r4,2 /* TLB Word 2 */
- addi r4,r4,1 /* Next TLB */
+tlbnx2: addi r4,r4,1 /* Next TLB */
bdnz 1b
/*----------------------------------------------------------------*/