Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xx

8 files changed, 323 insertions, 37 deletions

diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 4f55583..cf56581 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -1333,6 +1333,9 @@ int enetInt (struct eth_device *dev)
 			}
 		}
 		mtdcr (uicsr, MAL_UIC_DEF|EMAC_UIC_DEF|EMAC_UIC_DEF1);	/* Clear */
+#if defined(CONFIG_405EZ)
+		mtsdr (sdricintstat, SDR_ICRX_STAT | SDR_ICTX0_STAT | SDR_ICTX1_STAT);
+#endif	/* defined(CONFIG_405EZ) */
 	}
 	while (serviced);
 
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index b02f6f4..2d8740c 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -47,6 +47,9 @@ void board_reset(void);
 
 #if defined(CONFIG_440)
 #define FREQ_EBC		(sys_info.freqEPB)
+#elif defined(CONFIG_405EZ)
+#define FREQ_EBC		((CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / \
+				 sys_info.pllExtBusDiv)
 #else
 #define FREQ_EBC		(sys_info.freqPLB / sys_info.pllExtBusDiv)
 #endif
@@ -209,7 +212,8 @@ int checkcpu (void)
 
 	puts("AMCC PowerPC 4");
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	puts("05");
 #endif
 #if defined(CONFIG_440)
@@ -257,6 +261,10 @@ int checkcpu (void)
 		puts("EP Rev. B");
 		break;
 
+	case PVR_405EZ_RA:
+		puts("EZ Rev. A");
+		break;
+
 #if defined(CONFIG_440)
 	case PVR_440GP_RB:
 		puts("GP Rev. B");
@@ -386,9 +394,9 @@ int checkcpu (void)
 	}
 
 	printf (" at %s MHz (PLB=%lu, OPB=%lu, EBC=%lu MHz)\n", strmhz(buf, clock),
-	       sys_info.freqPLB / 1000000,
-	       sys_info.freqPLB / sys_info.pllOpbDiv / 1000000,
-	       FREQ_EBC / 1000000);
+		sys_info.freqPLB / 1000000,
+		get_OPB_freq() / 1000000,
+		FREQ_EBC / 1000000);
 
 	if (addstr[0] != 0)
 		printf("       %s\n", addstr);
@@ -418,7 +426,7 @@ int checkcpu (void)
 	putc('\n');
 #endif
 
-#if defined(CONFIG_405EP)
+#if defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 	printf ("       16 kB I-Cache 16 kB D-Cache");
 #elif defined(CONFIG_440)
 	printf ("       32 kB I-Cache 32 kB D-Cache");
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index 82ae443..9d1cd13 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -256,7 +256,8 @@ cpu_init_f (void)
 	 */
 #if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
 #if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
-     defined(CONFIG_405EP) || defined(CONFIG_405))
+     defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+     defined(CONFIG_405))
 	/*
 	 * Move the next instructions into icache, since these modify the flash
 	 * we are running from!
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index fab0d95..e62dd9d 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -264,7 +264,8 @@ int serial_tstc ()
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405EP) || \
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
     defined(CONFIG_440)
 
 #if defined(CONFIG_440)
@@ -309,7 +310,7 @@ int serial_tstc ()
 #define MFREG(a, d)	mfsdr(a, d)
 #define MTREG(a, d)	mtsdr(a, d)
 #endif /* #if defined(CONFIG_440GP) */
-#elif defined(CONFIG_405EP)
+#elif defined(CONFIG_405EP) || defined(CONFIG_405EZ)
 #define UART0_BASE      0xef600300
 #define UART1_BASE      0xef600400
 #define UCR0_MASK       0x0000007f
@@ -392,47 +393,95 @@ volatile static serial_buffer_t buf_info;
 
 #if defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLOCK)
 static void serial_divs (int baudrate, unsigned long *pudiv,
-			 unsigned short *pbdiv )
+			 unsigned short *pbdiv)
 {
-	sys_info_t	sysinfo;
+	sys_info_t sysinfo;
 	unsigned long div;		/* total divisor udiv * bdiv */
 	unsigned long umin;		/* minimum udiv	*/
-	unsigned short diff;    /* smallest diff */
-	unsigned long udiv;     /* best udiv */
-
-	unsigned short idiff;   /* current diff */
-	unsigned short ibdiv;   /* current bdiv */
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
 	unsigned long i;
-	unsigned long est;      /* current estimate */
+	unsigned long est;		/* current estimate */
 
-	get_sys_info( &sysinfo );
+	get_sys_info(&sysinfo);
 
-	udiv = 32;     /* Assume lowest possible serial clk */
-	div = sysinfo.freqPLB/(16*baudrate); /* total divisor */
-	umin = sysinfo.pllOpbDiv<<1; /* 2 x OPB divisor */
-	diff = 32;      /* highest possible */
+	udiv = 32;			/* Assume lowest possible serial clk */
+	div = sysinfo.freqPLB / (16 * baudrate); /* total divisor */
+	umin = sysinfo.pllOpbDiv << 1;	/* 2 x OPB divisor */
+	diff = 32;			/* highest possible */
 
 	/* i is the test udiv value -- start with the largest
 	 * possible (32) to minimize serial clock and constrain
 	 * search to umin.
 	 */
-	for( i = 32; i > umin; i-- ){
-		ibdiv = div/i;
+	for (i = 32; i > umin; i--) {
+		ibdiv = div / i;
 		est = i * ibdiv;
 		idiff = (est > div) ? (est-div) : (div-est);
-		if( idiff == 0 ){
+		if (idiff == 0) {
 			udiv = i;
 			break;      /* can't do better */
-		}
-		else if( idiff < diff ){
+		} else if (idiff < diff) {
 			udiv = i;       /* best so far */
 			diff = idiff;   /* update lowest diff*/
 		}
 	}
 
 	*pudiv = udiv;
-	*pbdiv = div/udiv;
+	*pbdiv = div / udiv;
+}
+
+#elif defined(CONFIG_405EZ)
+
+static void serial_divs (int baudrate, unsigned long *pudiv,
+			 unsigned short *pbdiv)
+{
+	sys_info_t sysinfo;
+	unsigned long div;		/* total divisor udiv * bdiv */
+	unsigned long umin;		/* minimum udiv	*/
+	unsigned short diff;		/* smallest diff */
+	unsigned long udiv;		/* best udiv */
+	unsigned short idiff;		/* current diff */
+	unsigned short ibdiv;		/* current bdiv */
+	unsigned long i;
+	unsigned long est;		/* current estimate */
+	unsigned long plloutb;
+	u32 reg;
+
+	get_sys_info(&sysinfo);
 
+	plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
+		   / sysinfo.pllFwdDivB);
+	udiv = 256;			/* Assume lowest possible serial clk */
+	div = plloutb / (16 * baudrate); /* total divisor */
+	umin = (plloutb / get_OPB_freq()) << 1;	/* 2 x OPB divisor */
+	diff = 256;			/* highest possible */
+
+	/* i is the test udiv value -- start with the largest
+	 * possible (256) to minimize serial clock and constrain
+	 * search to umin.
+	 */
+	for (i = 256; i > umin; i--) {
+		ibdiv = div / i;
+		est = i * ibdiv;
+		idiff = (est > div) ? (est-div) : (div-est);
+		if (idiff == 0) {
+			udiv = i;
+			break;      /* can't do better */
+		} else if (idiff < diff) {
+			udiv = i;       /* best so far */
+			diff = idiff;   /* update lowest diff*/
+		}
+	}
+
+	*pudiv = udiv;
+	mfcpr(cprperd0, reg);
+	reg &= ~0x0000ffff;
+	reg |= ((udiv - 0) << 8) | (udiv - 0);
+	mtcpr(cprperd0, reg);
+	*pbdiv = div / udiv;
 }
 #endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
 
@@ -518,6 +567,10 @@ int serial_init (void)
 	unsigned short bdiv;
 	volatile char val;
 
+#if defined(CONFIG_405EZ)
+	serial_divs(gd->baudrate, &udiv, &bdiv);
+	clk = tmp = reg = 0;
+#else
 #ifdef CONFIG_405EP
 	reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
 	clk = gd->cpu_clk;
@@ -548,9 +601,9 @@ int serial_init (void)
 	reg |= (udiv - 1) << CR0_UDIV_POS;	/* set the UART divisor */
 	mtdcr (cntrl0, reg);
 #endif /* CONFIG_405EP */
-
 	tmp = gd->baudrate * udiv * 16;
 	bdiv = (clk + tmp / 2) / tmp;
+#endif /* CONFIG_405EZ */
 
 	out8(UART_BASE + UART_LCR, 0x80);	/* set DLAB bit */
 	out8(UART_BASE + UART_DLL, bdiv);	/* set baudrate divisor */
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 06220c3..028b11a 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -767,11 +767,119 @@ ulong get_PCI_freq (void)
 	return val;
 }
 
+#elif defined(CONFIG_405EZ)
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+	unsigned long cpr_plld;
+	unsigned long cpr_primad;
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
+	unsigned long primad_cpudv;
+	unsigned long m;
+
+	/*
+	 * Read PLL Mode registers
+	 */
+	mfcpr(cprplld, cpr_plld);
+
+	/*
+	 * Determine forward divider A
+	 */
+	sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
+
+	/*
+	 * Determine forward divider B (should be equal to A)
+	 */
+	sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
+	if (sysInfo->pllFwdDivB == 0) {
+		sysInfo->pllFwdDivB = 8;
+	}
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
+	if (sysInfo->pllFbkDiv == 0) {
+		sysInfo->pllFbkDiv = 256;
+	}
+
+	/*
+	 * Read CPR_PRIMAD register
+	 */
+	mfcpr(cprprimad, cpr_primad);
+	/*
+	 * Determine PLB_DIV.
+	 */
+	sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
+	if (sysInfo->pllPlbDiv == 0) {
+		sysInfo->pllPlbDiv = 16;
+	}
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
+	if (sysInfo->pllExtBusDiv == 0) {
+		sysInfo->pllExtBusDiv = 16;
+	}
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
+	if (sysInfo->pllOpbDiv == 0) {
+		sysInfo->pllOpbDiv = 16;
+	}
+
+	/*
+	 * Determine the M factor
+	 */
+	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+
+	/*
+	 * Determine VCO clock frequency
+	 */
+	sysInfo->freqVCOHz = (1000000000000LL * (unsigned long long)m) /
+		(unsigned long long)sysClkPeriodPs;
+
+	/*
+	 * Determine CPU clock frequency
+	 */
+	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
+	if (primad_cpudv == 0) {
+		primad_cpudv = 16;
+	}
+
+	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+
+	/*
+	 * Determine PLB clock frequency
+	 */
+	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+}
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = (CONFIG_SYS_CLK_FREQ * sys_info.pllFbkDiv) / sys_info.pllOpbDiv;
+
+	return val;
+}
+
 #endif
 
 int get_clocks (void)
 {
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
@@ -796,7 +904,9 @@ ulong get_bus_freq (ulong dummy)
 {
 	ulong val;
 
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_440) || defined(CONFIG_405)
 	sys_info_t sys_info;
 
 	get_sys_info (&sys_info);
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 54be37c..d918b3e 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -699,7 +699,9 @@ _start:
 #endif	/* CONFIG_IOP480 */
 
 /*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_405EP)
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
+    defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
+    defined(CONFIG_405)
 	/*----------------------------------------------------------------------- */
 	/* Clear and set up some registers. */
 	/*----------------------------------------------------------------------- */
@@ -727,13 +729,13 @@ _start:
 	/*----------------------------------------------------------------------- */
 	/* Enable two 128MB cachable regions. */
 	/*----------------------------------------------------------------------- */
-	addis	r4,r0,0x8000
-	addi	r4,r4,0x0001
+	lis	r4,0x8000
+	ori	r4,r4,0x0001
 	mticcr	r4			/* instruction cache */
 	isync
 
-	addis	r4,r0,0x0000
-	addi	r4,r4,0x0000
+	lis	r4,0x0000
+	ori	r4,r4,0x0000
 	mtdccr	r4			/* data cache */
 
 #if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
@@ -755,6 +757,70 @@ _start:
 #endif /* CONFIG_405EP */
 
 #if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+/* test-only... (clean up later when NAND booting is supported) */
+#if defined(CONFIG_405EZ)
+	/********************************************************************
+	 * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
+	 *******************************************************************/
+	/*
+	 * We can map the OCM on the PLB3, so map it at
+	 * CFG_OCM_DATA_ADDR + 0x8000
+	 */
+	lis	r3,CFG_OCM_DATA_ADDR@h	/* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x8270	/* 32K Offset, 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmplb3cr1,r3		/* Set PLB Access */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmplb3cr2,r3		/* Set PLB Access */
+	isync
+
+	lis	r3,CFG_OCM_DATA_ADDR@h  /* OCM location */
+	ori	r3,r3,CFG_OCM_DATA_ADDR@l
+	ori	r3,r3,0x0270            /* 16K for Bank 1, R/W/Enable */
+	mtdcr	ocmdscr1, r3            /* Set Data Side */
+	mtdcr	ocmiscr1, r3            /* Set Instruction Side */
+	ori	r3,r3,0x4000		/* Add 0x4000 for bank 2 */
+	mtdcr	ocmdscr2, r3            /* Set Data Side */
+	mtdcr	ocmiscr2, r3            /* Set Instruction Side */
+	addis	r3,0,0x0800             /* OCM Data Parity Disable - 1 Wait State */
+	mtdcr	ocmdsisdpc,r4
+
+	isync
+
+#if defined(CONFIG_NAND_SPL)
+	/*
+	 * 405EZ can boot from NAND Flash.
+	 * If we are booting the SPL (Pre-loader), copy code from
+	 * the mapped 4K NAND Flash to the OCM
+	 */
+	li	r4,(CFG_NAND_BOOT_SPL_SIZE >> 2) - 1
+	mtctr	r4
+	lis	r2,CFG_NAND_BOOT_SPL_SRC@h
+	ori	r2,r2,CFG_NAND_BOOT_SPL_SRC@l
+	lis	r3,CFG_NAND_BOOT_SPL_DST@h
+	ori	r3,r3,CFG_NAND_BOOT_SPL_DST@l
+spl_loop:
+	lwzu	r4,4(r2)
+	stwu	r4,4(r3)
+	bdnz	spl_loop
+
+	/*
+	 * Jump to code in OCM Ram
+	 */
+	bl 	00f
+00:	mflr	r10
+	lis	r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@h
+	ori	r3,r3,(CFG_NAND_BOOT_SPL_SRC - CFG_NAND_BOOT_SPL_DST)@l
+	sub	r10,r10,r3
+	addi	r10,r10,28
+	mtlr	r10
+	blr
+start_ram:
+	sync
+	isync
+#endif
+#else
+/* ...test-only */
 	/********************************************************************
 	 * Setup OCM - On Chip Memory
 	 *******************************************************************/
@@ -774,6 +840,7 @@ _start:
 	addis	r4, 0, 0xC000		/* OCM data area enabled */
 	mtdcr	ocmdscntl, r4
 	isync
+#endif /* CONFIG_405EZ */
 #endif
 
 	/*----------------------------------------------------------------------- */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index ab852c5..c71a6a9 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -76,7 +76,7 @@
 #define m16_swap(x) swap_16(x)
 #define m32_swap(x) swap_32(x)
 
-#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+#if defined(CONFIG_405EZ) || defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 #define ohci_cpu_to_le16(x) (x)
 #define ohci_cpu_to_le32(x) (x)
 #else
@@ -1601,7 +1601,7 @@ int usb_lowlevel_init(void)
 	gohci.irq = -1;
 #if defined(CONFIG_440EP)
  	gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX)
+#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
 	gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
 #endif
 
@@ -1625,8 +1625,10 @@ int usb_lowlevel_init(void)
 	ohci_inited = 1;
 	urb_finished = 1;
 
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
 	/* init the device driver */
 	usb_dev_init();
+#endif
 
 	return 0;
 }
diff --git a/cpu/ppc4xx/vecnum.h b/cpu/ppc4xx/vecnum.h
index 685d48b..bddf9e5 100644
--- a/cpu/ppc4xx/vecnum.h
+++ b/cpu/ppc4xx/vecnum.h
@@ -231,6 +231,47 @@
 
 #else /* !defined(CONFIG_440) */
 
+#if defined(CONFIG_405EZ)
+#define VECNUM_D0		0	/* DMA channel 0		*/
+#define VECNUM_D1		1	/* DMA channel 1		*/
+#define VECNUM_D2		2	/* DMA channel 2		*/
+#define VECNUM_D3		3	/* DMA channel 3		*/
+#define VECNUM_1588		4	/* IEEE 1588 network synchronization */
+#define VECNUM_U0		5	/* UART0			*/
+#define VECNUM_U1		6	/* UART1			*/
+#define VECNUM_CAN0		7	/* CAN 0			*/
+#define VECNUM_CAN1		8	/* CAN 1			*/
+#define VECNUM_SPI		9	/* SPI				*/
+#define VECNUM_IIC0		10	/* I2C				*/
+#define VECNUM_CHT0		11	/* Chameleon timer high pri interrupt */
+#define VECNUM_CHT1		12	/* Chameleon timer high pri interrupt */
+#define VECNUM_USBH1		13	/* USB Host 1			*/
+#define VECNUM_USBH2		14	/* USB Host 2			*/
+#define VECNUM_USBDEV		15	/* USB Device			*/
+#define VECNUM_ETH0		16	/* 10/100 Ethernet interrupt status */
+#define VECNUM_EWU0		17	/* Ethernet wakeup sequence detected */
+
+#define VECNUM_MADMAL		18	/* Logical OR of following MadMAL int */
+#define VECNUM_MS		18	/*	MAL_SERR_INT 		*/
+#define VECNUM_TXDE		18	/* 	MAL_TXDE_INT 		*/
+#define VECNUM_RXDE		18	/*	MAL_RXDE_INT 		*/
+
+#define VECNUM_MTE		19	/* MAL TXEOB			*/
+#define VECNUM_MTE1		20	/* MAL TXEOB1			*/
+#define VECNUM_MRE		21	/* MAL RXEOB			*/
+#define VECNUM_NAND		22	/* NAND Flash controller	*/
+#define VECNUM_ADC		23	/* ADC				*/
+#define VECNUM_DAC		24	/* DAC				*/
+#define VECNUM_OPB2PLB		25	/* OPB to PLB bridge interrupt	*/
+#define VECNUM_RESERVED0	26	/* Reserved			*/
+#define VECNUM_EIR0		27	/* External interrupt 0		*/
+#define VECNUM_EIR1		28	/* External interrupt 1		*/
+#define VECNUM_EIR2		29	/* External interrupt 2		*/
+#define VECNUM_EIR3		30	/* External interrupt 3		*/
+#define VECNUM_EIR4		31	/* External interrupt 4		*/
+
+#else	/* !CONFIG_405EZ */
+
 #define VECNUM_U0           0           /* UART0                        */
 #define VECNUM_U1           1           /* UART1                        */
 #define VECNUM_D0           5           /* DMA channel 0                */
@@ -251,6 +292,7 @@
 #define VECNUM_EIR4         29          /* External interrupt 4         */
 #define VECNUM_EIR5         30          /* External interrupt 5         */
 #define VECNUM_EIR6         31          /* External interrupt 6         */
+#endif	/* defined(CONFIG_405EZ) */
 
 #endif /* defined(CONFIG_440) */