Coding stylke cleanup; rebuild CHANGELOG

5 files changed, 8 insertions, 8 deletions

diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S
index 9572837..0637003 100644
--- a/cpu/mpc5xx/start.S
+++ b/cpu/mpc5xx/start.S
@@ -155,7 +155,7 @@ in_flash:
 	/* Initialize some SPRs that are hard to access from C			*/
 	/*----------------------------------------------------------------------*/
 
-	lis     r3, CFG_IMMR@h          	/* Pass IMMR as arg1 to C routine */
+	lis     r3, CFG_IMMR@h			/* Pass IMMR as arg1 to C routine */
 	lis	r2, CFG_INIT_SP_ADDR@h
 	ori	r1, r2, CFG_INIT_SP_ADDR@l	/* Set up the stack in internal SRAM */
 	/* Note: R0 is still 0 here */
diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S
index bc55b58..7f5dc81 100644
--- a/cpu/mpc8260/start.S
+++ b/cpu/mpc8260/start.S
@@ -676,13 +676,13 @@ init_debug:
 	bdnz	1b
 
 	/* Load the Instruction Address Breakpoint Register (IABR).	*/
-	/* 								*/
+	/*								*/
 	/* The address to load is stored in the first word of dual port	*/
 	/* ram and should be preserved while the power is on, so you	*/
 	/* can plug addresses into that location then reset the cpu and	*/
 	/* this code will load that address into the IABR after the	*/
 	/* reset.							*/
-	/* 								*/
+	/*								*/
 	/* When the program counter matches the contents of the IABR,	*/
 	/* an exception is generated (before the instruction at that	*/
 	/* location completes). The vector for this exception is 0x1300 */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index fe7bbab..e24cd81 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -1340,14 +1340,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
 			 */
 			cr |= SDRAM_BXCR_SDBE;
 
- 			for (i = 0; i < num_banks; i++) {
+			for (i = 0; i < num_banks; i++) {
 				bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes =
 					(4 << 20) * bank_size_id;
 				bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr;
 				debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n",
 				      dimm_num, i, ctrl_bank_num[dimm_num]+i,
 				      bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes);
- 			}
+			}
 		}
 	}
 
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 874cec0..b5c0f53 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -58,8 +58,8 @@
 #define SDRAM_DDR2	2
 #define SDRAM_NONE	0
 
-#define MAXDIMMS 	2
-#define MAXRANKS 	4
+#define MAXDIMMS	2
+#define MAXRANKS	4
 #define MAXBXCF		4
 #define MAX_SPD_BYTES	256   /* Max number of bytes on the DIMM's SPD EEPROM */
 
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index bc1ae0e..351da36 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -153,7 +153,7 @@ cpu_init_f (void)
 	 */
 	asm volatile("	bl	0f"		::: "lr");
 	asm volatile("0:	mflr	3"		::: "r3");
-	asm volatile("	addi 	4, 0, 14"	::: "r4");
+	asm volatile("	addi	4, 0, 14"	::: "r4");
 	asm volatile("	mtctr	4"		::: "ctr");
 	asm volatile("1:	icbt	0, 3");
 	asm volatile("	addi	3, 3, 32"	::: "r3");