* Code cleanup

* Patch by Sascha Hauer, 28 Jun:
  - add generic support for Motorola i.MX architecture
  - add support for mx1ads, mx1fs2 and scb9328 boards

* Patches by Marc Leeman, 23 Jul 2004:
  - Add define for the PCI/Memory Buffer Configuration Register
  - corrected comments in cpu/mpc824x/cpu_init.c

* Add support for multiple serial interfaces
  (for example to allow modem dial-in / dial-out)

21 files changed, 688 insertions, 1296 deletions

diff --git a/cpu/arm720t/cpu.c b/cpu/arm720t/cpu.c
index 58eab4e..ef3fbf3 100644
--- a/cpu/arm720t/cpu.c
+++ b/cpu/arm720t/cpu.c
@@ -41,8 +41,6 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
 	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
diff --git a/cpu/arm920t/Makefile b/cpu/arm920t/Makefile
index 605adf3..68a33d6 100644
--- a/cpu/arm920t/Makefile
+++ b/cpu/arm920t/Makefile
@@ -26,7 +26,11 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(CPU).a
 
 START	= start.o
-OBJS	= serial.o interrupts.o cpu.o speed.o usb_ohci.o
+OBJS	= cpu.o	\
+	  imx_generic.o imx_interrupts.o imx_speed.o \
+	  interrupts.o \
+	  s3c24x0_interrupts.o s3c24x0_serial.o s3c24x0_speed.o \
+	  usb_ohci.o
 
 all:	.depend $(START) $(LIB)
 
diff --git a/cpu/arm920t/imx_generic.c b/cpu/arm920t/imx_generic.c
new file mode 100644
index 0000000..aa7c8c1
--- /dev/null
+++ b/cpu/arm920t/imx_generic.c
@@ -0,0 +1,90 @@
+/*
+ *  arch/arm/mach-imx/generic.c
+ *
+ *  author: Sascha Hauer
+ *  Created: april 20th, 2004
+ *  Copyright: Synertronixx GmbH
+ *
+ *  Common code for i.MX machines
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <common.h>
+
+#ifdef CONFIG_IMX
+
+#include <asm/arch/imx-regs.h>
+
+void imx_gpio_mode(int gpio_mode)
+{
+	unsigned int pin = gpio_mode & GPIO_PIN_MASK;
+	unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5;
+	unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10;
+	unsigned int tmp;
+
+	/* Pullup enable */
+	if(gpio_mode & GPIO_PUEN)
+		PUEN(port) |= (1<<pin);
+	else
+		PUEN(port) &= ~(1<<pin);
+
+	/* Data direction */
+	if(gpio_mode & GPIO_OUT)
+		DDIR(port) |= 1<<pin;
+	else
+		DDIR(port) &= ~(1<<pin);
+
+	/* Primary / alternate function */
+	if(gpio_mode & GPIO_AF)
+		GPR(port) |= (1<<pin);
+	else
+		GPR(port) &= ~(1<<pin);
+
+	/* use as gpio? */
+	if( ocr == 3 )
+		GIUS(port) |= (1<<pin);
+	else
+		GIUS(port) &= ~(1<<pin);
+
+	/* Output / input configuration */
+	/* FIXME: I'm not very sure about OCR and ICONF, someone
+	 * should have a look over it
+	 */
+	if(pin<16) {
+		tmp = OCR1(port);
+		tmp &= ~( 3<<(pin*2));
+		tmp |= (ocr << (pin*2));
+		OCR1(port) = tmp;
+
+		if( gpio_mode &	GPIO_AOUT )
+			ICONFA1(port) &= ~( 3<<(pin*2));
+		if( gpio_mode &	GPIO_BOUT )
+			ICONFB1(port) &= ~( 3<<(pin*2));
+	} else {
+		tmp = OCR2(port);
+		tmp &= ~( 3<<((pin-16)*2));
+		tmp |= (ocr << ((pin-16)*2));
+		OCR2(port) = tmp;
+
+		if( gpio_mode &	GPIO_AOUT )
+			ICONFA2(port) &= ~( 3<<((pin-16)*2));
+		if( gpio_mode &	GPIO_BOUT )
+			ICONFB2(port) &= ~( 3<<((pin-16)*2));
+	}
+}
+
+#endif /* CONFIG_IMX */
diff --git a/cpu/arm920t/imx_interrupts.c b/cpu/arm920t/imx_interrupts.c
new file mode 100644
index 0000000..12ae2fa
--- /dev/null
+++ b/cpu/arm920t/imx_interrupts.c
@@ -0,0 +1,117 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <arm920t.h>
+#include <asm/arch/imx-regs.h>
+
+int interrupt_init (void)
+{
+	int i;
+	/* setup GP Timer 1 */
+	TCTL1 = TCTL_SWR;
+	for ( i=0; i<100; i++) TCTL1 = 0; /* We have no udelay by now */
+	TPRER1 = get_PERCLK1() / 1000000; /* 1 MHz */
+	TCTL1 |= TCTL_FRR | (1<<1); /* Freerun Mode, PERCLK1 input */
+
+	reset_timer_masked();
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked ();
+}
+
+void set_timer (ulong t)
+{
+	/* nop */
+}
+
+void reset_timer_masked (void)
+{
+	TCTL1 &= ~TCTL_TEN;
+	TCTL1 |= TCTL_TEN; /* Enable timer */
+}
+
+ulong get_timer_masked (void)
+{
+	return TCN1;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong start = get_timer_masked();
+
+	while (get_timer_masked () - start < usec )
+		/*NOP*/;
+}
+
+void udelay (unsigned long usec)
+{
+	udelay_masked(usec);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+	tbclk = CFG_HZ;
+
+	return tbclk;
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/imx_speed.c b/cpu/arm920t/imx_speed.c
new file mode 100644
index 0000000..1e29698
--- /dev/null
+++ b/cpu/arm920t/imx_speed.c
@@ -0,0 +1,102 @@
+/*
+ *
+ * (c) 2004 Sascha Hauer <sascha@saschahauer.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+#include <common.h>
+#if defined (CONFIG_IMX)
+
+#include <asm/arch/imx-regs.h>
+
+/* ------------------------------------------------------------------------- */
+/* NOTE: This describes the proper use of this file.
+ *
+ * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
+ * SH FIXME: 16780000 in our case
+ * get_FCLK(), get_HCLK(), get_PCLK() and get_UCLK() return the clock of
+ * the specified bus in HZ.
+ */
+/* ------------------------------------------------------------------------- */
+
+ulong get_systemPLLCLK(void)
+{
+	/* FIXME: We assume System_SEL = 0 here */
+	u32 spctl0 = SPCTL0;
+	u32 mfi = (spctl0 >> 10) & 0xf;
+	u32 mfn = spctl0 & 0x3f;
+	u32 mfd = (spctl0 >> 16) & 0x3f;
+	u32 pd =  (spctl0 >> 26) & 0xf;
+
+	mfi = mfi<=5 ? 5 : mfi;
+
+	return (2*(CONFIG_SYSPLL_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_mcuPLLCLK(void)
+{
+	/* FIXME: We assume System_SEL = 0 here */
+	u32 mpctl0 = MPCTL0;
+	u32 mfi = (mpctl0 >> 10) & 0xf;
+	u32 mfn = mpctl0 & 0x3f;
+	u32 mfd = (mpctl0 >> 16) & 0x3f;
+	u32 pd =  (mpctl0 >> 26) & 0xf;
+
+	mfi = mfi<=5 ? 5 : mfi;
+
+	return (2*(CONFIG_SYS_CLK_FREQ>>10)*( (mfi<<10) + (mfn<<10)/(mfd+1)))/(pd+1);
+}
+
+ulong get_FCLK(void)
+{
+	return (( CSCR>>15)&1) ? get_mcuPLLCLK()>>1 : get_mcuPLLCLK();
+}
+
+/* return HCLK frequency */
+ulong get_HCLK(void)
+{
+	u32 bclkdiv = (( CSCR >> 10 ) & 0xf) + 1;
+	printf("bclkdiv: %d\n", bclkdiv);
+	return get_systemPLLCLK() / bclkdiv;
+}
+
+/* return BCLK frequency */
+ulong get_BCLK(void)
+{
+	return get_HCLK();
+}
+
+ulong get_PERCLK1(void)
+{
+	return get_systemPLLCLK() / (((PCDR) & 0xf)+1);
+}
+
+ulong get_PERCLK2(void)
+{
+	return get_systemPLLCLK() / (((PCDR>>4) & 0xf)+1);
+}
+
+ulong get_PERCLK3(void)
+{
+	return get_systemPLLCLK() / (((PCDR>>16) & 0x7f)+1);
+}
+
+#endif /* defined (CONFIG_IMX) */
diff --git a/cpu/arm920t/interrupts.c b/cpu/arm920t/interrupts.c
index 521c4f4..ea58f15 100644
--- a/cpu/arm920t/interrupts.c
+++ b/cpu/arm920t/interrupts.c
@@ -30,25 +30,11 @@
  */
 
 #include <common.h>
-#include <arm920t.h>
-#if defined(CONFIG_S3C2400)
-#include <s3c2400.h>
-#elif defined(CONFIG_S3C2410)
-#include <s3c2410.h>
-#endif
 
+#include <arm920t.h>
 #include <asm/proc-armv/ptrace.h>
 
 extern void reset_cpu(ulong addr);
-int timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
-	return (timers->TCNTO4 & 0xffff);
-}
 
 #ifdef CONFIG_USE_IRQ
 /* enable IRQ interrupts */
@@ -182,130 +168,3 @@ void do_irq (struct pt_regs *pt_regs)
 	show_regs (pt_regs);
 	bad_mode ();
 }
-
-static ulong timestamp;
-static ulong lastdec;
-
-int interrupt_init (void)
-{
-	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
-
-	/* use PWM Timer 4 because it has no output */
-	/* prescaler for Timer 4 is 16 */
-	timers->TCFG0 = 0x0f00;
-	if (timer_load_val == 0)
-	{
-		/*
-		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
-		 * (default) and prescaler = 16. Should be 10390
-		 * @33.25MHz and 15625 @ 50 MHz
-		 */
-		timer_load_val = get_PCLK()/(2 * 16 * 100);
-	}
-	/* load value for 10 ms timeout */
-	lastdec = timers->TCNTB4 = timer_load_val;
-	/* auto load, manual update of Timer 4 */
-	timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
-	/* auto load, start Timer 4 */
-	timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void set_timer (ulong t)
-{
-	timestamp = t;
-}
-
-void udelay (unsigned long usec)
-{
-	ulong tmo;
-	ulong start = get_timer(0);
-
-	tmo = usec / 1000;
-	tmo *= (timer_load_val * 100);
-	tmo /= 1000;
-
-	while ((ulong)(get_timer_masked () - start) < tmo)
-		/*NOP*/;
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = READ_TIMER();
-	timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + timer_load_val - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-
-	tmo = usec / 1000;
-	tmo *= (timer_load_val * 100);
-	tmo /= 1000;
-
-	reset_timer_masked ();
-
-	while (get_timer_masked () < tmo)
-		/*NOP*/;
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
-	tbclk = timer_load_val * 100;
-#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
-	tbclk = CFG_HZ;
-#else
-#	error "tbclk not configured"
-#endif
-
-	return tbclk;
-}
diff --git a/cpu/arm920t/s3c24x0_interrupts.c b/cpu/arm920t/s3c24x0_interrupts.c
new file mode 100644
index 0000000..92298b0
--- /dev/null
+++ b/cpu/arm920t/s3c24x0_interrupts.c
@@ -0,0 +1,180 @@
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
+#include <arm920t.h>
+#if defined(CONFIG_S3C2400)
+#include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+#include <s3c2410.h>
+#endif
+
+extern void reset_cpu(ulong addr);
+int timer_load_val = 0;
+
+/* macro to read the 16 bit timer */
+static inline ulong READ_TIMER(void)
+{
+	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+
+	return (timers->TCNTO4 & 0xffff);
+}
+
+static ulong timestamp;
+static ulong lastdec;
+
+int interrupt_init (void)
+{
+	S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS();
+
+	/* use PWM Timer 4 because it has no output */
+	/* prescaler for Timer 4 is 16 */
+	timers->TCFG0 = 0x0f00;
+	if (timer_load_val == 0)
+	{
+		/*
+		 * for 10 ms clock period @ PCLK with 4 bit divider = 1/2
+		 * (default) and prescaler = 16. Should be 10390
+		 * @33.25MHz and 15625 @ 50 MHz
+		 */
+		timer_load_val = get_PCLK()/(2 * 16 * 100);
+	}
+	/* load value for 10 ms timeout */
+	lastdec = timers->TCNTB4 = timer_load_val;
+	/* auto load, manual update of Timer 4 */
+	timers->TCON = (timers->TCON & ~0x0700000) | 0x600000;
+	/* auto load, start Timer 4 */
+	timers->TCON = (timers->TCON & ~0x0700000) | 0x500000;
+	timestamp = 0;
+
+	return (0);
+}
+
+/*
+ * timer without interrupts
+ */
+
+void reset_timer (void)
+{
+	reset_timer_masked ();
+}
+
+ulong get_timer (ulong base)
+{
+	return get_timer_masked () - base;
+}
+
+void set_timer (ulong t)
+{
+	timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+	ulong tmo;
+	ulong start = get_timer(0);
+
+	tmo = usec / 1000;
+	tmo *= (timer_load_val * 100);
+	tmo /= 1000;
+
+	while ((ulong)(get_timer_masked () - start) < tmo)
+		/*NOP*/;
+}
+
+void reset_timer_masked (void)
+{
+	/* reset time */
+	lastdec = READ_TIMER();
+	timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+	ulong now = READ_TIMER();
+
+	if (lastdec >= now) {
+		/* normal mode */
+		timestamp += lastdec - now;
+	} else {
+		/* we have an overflow ... */
+		timestamp += lastdec + timer_load_val - now;
+	}
+	lastdec = now;
+
+	return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+	ulong tmo;
+
+	tmo = usec / 1000;
+	tmo *= (timer_load_val * 100);
+	tmo /= 1000;
+
+	reset_timer_masked ();
+
+	while (get_timer_masked () < tmo)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+	ulong tbclk;
+
+#if defined(CONFIG_SMDK2400) || defined(CONFIG_TRAB)
+	tbclk = timer_load_val * 100;
+#elif defined(CONFIG_SMDK2410) || defined(CONFIG_VCMA9)
+	tbclk = CFG_HZ;
+#else
+#	error "tbclk not configured"
+#endif
+
+	return tbclk;
+}
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/serial.c b/cpu/arm920t/s3c24x0_serial.c
index 1749e82..8327443 100644
--- a/cpu/arm920t/serial.c
+++ b/cpu/arm920t/s3c24x0_serial.c
@@ -1,24 +1,26 @@
-	/*
-	 * (C) Copyright 2002
-	 * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-	 *
-	 * This program is free software; you can redistribute it and/or modify
-	 * it under the terms of the GNU General Public License as published by
-	 * the Free Software Foundation; either version 2 of the License, or
-	 * (at your option) any later version.
-	 *
-	 * This program is distributed in the hope that it will be useful,
-	 * but WITHOUT ANY WARRANTY; without even the implied warranty of
-	 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-	 * GNU General Public License for more details.
-	 *
-	 * You should have received a copy of the GNU General Public License
+/*
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
  */
 
 #include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
 #if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
@@ -176,3 +178,5 @@ serial_puts (const char *s)
 		serial_putc (*s++);
 	}
 }
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/speed.c b/cpu/arm920t/s3c24x0_speed.c
index 1f43543..e0dca62 100644
--- a/cpu/arm920t/speed.c
+++ b/cpu/arm920t/s3c24x0_speed.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2001-2002
+ * (C) Copyright 2001-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2002
@@ -30,6 +30,8 @@
  */
 
 #include <common.h>
+#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB)
+
 #if defined(CONFIG_S3C2400)
 #include <s3c2400.h>
 #elif defined(CONFIG_S3C2410)
@@ -95,3 +97,5 @@ ulong get_UCLK(void)
 {
     return(get_PLLCLK(UPLL));
 }
+
+#endif /* defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) */
diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S
index 0e372d0..78c470d 100644
--- a/cpu/arm920t/start.S
+++ b/cpu/arm920t/start.S
@@ -118,20 +118,17 @@ reset:
 
 /* turn off the watchdog */
 #if defined(CONFIG_S3C2400)
-#define pWTCON		0x15300000
-/* Interupt-Controller base addresses */
-#define INTMSK		0x14400008
-/* clock divisor register */
-#define CLKDIVN		0x14800014
+# define pWTCON		0x15300000
+# define INTMSK		0x14400008	/* Interupt-Controller base addresses */
+# define CLKDIVN	0x14800014	/* clock divisor register */
 #elif defined(CONFIG_S3C2410)
-#define pWTCON		0x53000000
-/* Interupt-Controller base addresses */
-#define INTMSK		0x4A000008
-#define INTSUBMSK	0x4A00001C
-/* clock divisor register */
-#define CLKDIVN		0x4C000014
+# define pWTCON		0x53000000
+# define INTMSK		0x4A000008	/* Interupt-Controller base addresses */
+# define INTSUBMSK	0x4A00001C
+# define CLKDIVN	0x4C000014	/* clock divisor register */
 #endif
 
+#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
 	ldr     r0, =pWTCON
 	mov     r1, #0x0
 	str     r1, [r0]
@@ -142,17 +139,18 @@ reset:
 	mov	r1, #0xffffffff
 	ldr	r0, =INTMSK
 	str	r1, [r0]
-#if defined(CONFIG_S3C2410)
+# if defined(CONFIG_S3C2410)
 	ldr	r1, =0x3ff
 	ldr	r0, =INTSUBMSK
 	str	r1, [r0]
-#endif
+# endif
 
 	/* FCLK:HCLK:PCLK = 1:2:4 */
 	/* default FCLK is 120 MHz ! */
 	ldr	r0, =CLKDIVN
 	mov	r1, #3
 	str	r1, [r0]
+#endif	/* CONFIG_S3C2400 || CONFIG_S3C2410 */
 
 	/*
 	 * we do sys-critical inits only at reboot,
diff --git a/cpu/mc9328/Makefile b/cpu/mc9328/Makefile
deleted file mode 100644
index fccc6ab..0000000
--- a/cpu/mc9328/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= lib$(CPU).a
-
-START	= start.o
-OBJS	= serial.o interrupts.o cpu.o
-
-all:	.depend $(START) $(LIB)
-
-$(LIB):	$(OBJS)
-	$(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend:	Makefile $(START:.o=.S) $(OBJS:.o=.c)
-		$(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/cpu/mc9328/config.mk b/cpu/mc9328/config.mk
deleted file mode 100644
index cef7d26..0000000
--- a/cpu/mc9328/config.mk
+++ /dev/null
@@ -1,27 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-strict-aliasing  -fno-common -ffixed-r8 \
-	-mshort-load-bytes -msoft-float
-
-PLATFORM_CPPFLAGS += -mapcs-32 -march=armv4
diff --git a/cpu/mc9328/cpu.c b/cpu/mc9328/cpu.c
deleted file mode 100644
index 2a2b578..0000000
--- a/cpu/mc9328/cpu.c
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <arm920t.h>
-
-/* read co-processor 15, register #1 (control register) */
-static unsigned long read_p15_c1 (void)
-{
-	unsigned long value;
-
-	__asm__ __volatile__(
-		"mrc     p15, 0, %0, c1, c0, 0   @ read control reg\n"
-		: "=r" (value)
-		:
-		: "memory");
-
-#ifdef MMU_DEBUG
-	printf ("p15/c1 is = %08lx\n", value);
-#endif
-	return value;
-}
-
-/* write to co-processor 15, register #1 (control register) */
-static void write_p15_c1 (unsigned long value)
-{
-#ifdef MMU_DEBUG
-	printf ("write %08lx to p15/c1\n", value);
-#endif
-	__asm__ __volatile__(
-		"mcr     p15, 0, %0, c1, c0, 0   @ write it back\n"
-		:
-		: "r" (value)
-		: "memory");
-
-	read_p15_c1 ();
-}
-
-static void cp_delay (void)
-{
-	volatile int i;
-
-	/* copro seems to need some delay between reading and writing */
-	for (i = 0; i < 100; i++);
-}
-
-/* See also ARM Ref. Man. */
-#define C1_MMU		(1<<0)		/* mmu off/on */
-#define C1_ALIGN	(1<<1)		/* alignment faults off/on */
-#define C1_DC		(1<<2)		/* dcache off/on */
-#define C1_BIG_ENDIAN	(1<<7)	/* big endian off/on */
-#define C1_SYS_PROT	(1<<8)		/* system protection */
-#define C1_ROM_PROT	(1<<9)		/* ROM protection */
-#define C1_IC		(1<<12)		/* icache off/on */
-#define C1_HIGH_VECTORS	(1<<13)	/* location of vectors: low/high addresses */
-#define RESERVED_1	(0xf << 3)	/* must be 111b for R/W */
-
-int cpu_init (void)
-{
-	/*
-	 * setup up stacks if necessary
-	 */
-#ifdef CONFIG_USE_IRQ
-	DECLARE_GLOBAL_DATA_PTR;
-
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
-	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
-#endif
-	return 0;
-}
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	unsigned long i;
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	asm ("mrc p15, 0, %0, c1, c0, 0":"=r" (i));
-	i &= ~(C1_DC | C1_IC);
-	asm ("mcr p15, 0, %0, c1, c0, 0": :"r" (i));
-
-	/* flush I/D-cache */
-	i = 0;
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-	return (0);
-}
-
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
-	extern void reset_cpu (ulong addr);
-
-	disable_interrupts ();
-	reset_cpu (0);
-	/*NOTREACHED*/
-	return (0);
-}
-
-void icache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_IC);
-}
-
-void icache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg & ~C1_IC);
-}
-
-int icache_status (void)
-{
-	return (read_p15_c1 () & C1_IC) != 0;
-}
-
-#ifdef USE_920T_MMU
-/* It makes no sense to use the dcache if the MMU is not enabled */
-void dcache_enable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	write_p15_c1 (reg | C1_DC);
-}
-
-void dcache_disable (void)
-{
-	ulong reg;
-
-	reg = read_p15_c1 ();
-	cp_delay ();
-	reg &= ~C1_DC;
-	write_p15_c1 (reg);
-}
-
-int dcache_status (void)
-{
-	return (read_p15_c1 () & C1_DC) != 0;
-}
-#endif
diff --git a/cpu/mc9328/interrupts.c b/cpu/mc9328/interrupts.c
deleted file mode 100644
index 2407db6..0000000
--- a/cpu/mc9328/interrupts.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <arm920t.h>
-#include <mc9328.h>
-
-#include <asm/proc-armv/ptrace.h>
-
-extern void reset_cpu(ulong addr);
-int timer_load_val = 0;
-
-#ifdef CONFIG_USE_IRQ
-/* enable IRQ interrupts */
-void enable_interrupts (void)
-{
-	unsigned long temp;
-	__asm__ __volatile__("mrs %0, cpsr\n"
-			     "bic %0, %0, #0x80\n"
-			     "msr cpsr_c, %0"
-			     : "=r" (temp)
-			     :
-			     : "memory");
-}
-
-
-/*
- * disable IRQ/FIQ interrupts
- * returns true if interrupts had been enabled before we disabled them
- */
-int disable_interrupts (void)
-{
-	unsigned long old,temp;
-	__asm__ __volatile__("mrs %0, cpsr\n"
-			     "orr %1, %0, #0xc0\n"
-			     "msr cpsr_c, %1"
-			     : "=r" (old), "=r" (temp)
-			     :
-			     : "memory");
-	return (old & 0x80) == 0;
-}
-#else
-void enable_interrupts (void)
-{
-	return;
-}
-int disable_interrupts (void)
-{
-	return 0;
-}
-#endif
-
-
-void bad_mode (void)
-{
-	panic ("Resetting CPU ...\n");
-	reset_cpu (0);
-}
-
-void show_regs (struct pt_regs *regs)
-{
-	unsigned long flags;
-	const char *processor_modes[] = {
-	"USER_26",	"FIQ_26",	"IRQ_26",	"SVC_26",
-	"UK4_26",	"UK5_26",	"UK6_26",	"UK7_26",
-	"UK8_26",	"UK9_26",	"UK10_26",	"UK11_26",
-	"UK12_26",	"UK13_26",	"UK14_26",	"UK15_26",
-	"USER_32",	"FIQ_32",	"IRQ_32",	"SVC_32",
-	"UK4_32",	"UK5_32",	"UK6_32",	"ABT_32",
-	"UK8_32",	"UK9_32",	"UK10_32",	"UND_32",
-	"UK12_32",	"UK13_32",	"UK14_32",	"SYS_32",
-	};
-
-	flags = condition_codes (regs);
-
-	printf ("pc : [<%08lx>]    lr : [<%08lx>]\n"
-		"sp : %08lx  ip : %08lx  fp : %08lx\n",
-		instruction_pointer (regs),
-		regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp);
-	printf ("r10: %08lx  r9 : %08lx  r8 : %08lx\n",
-		regs->ARM_r10, regs->ARM_r9, regs->ARM_r8);
-	printf ("r7 : %08lx  r6 : %08lx  r5 : %08lx  r4 : %08lx\n",
-		regs->ARM_r7, regs->ARM_r6, regs->ARM_r5, regs->ARM_r4);
-	printf ("r3 : %08lx  r2 : %08lx  r1 : %08lx  r0 : %08lx\n",
-		regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
-	printf ("Flags: %c%c%c%c",
-		flags & CC_N_BIT ? 'N' : 'n',
-		flags & CC_Z_BIT ? 'Z' : 'z',
-		flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
-	printf ("  IRQs %s  FIQs %s  Mode %s%s\n",
-		interrupts_enabled (regs) ? "on" : "off",
-		fast_interrupts_enabled (regs) ? "on" : "off",
-		processor_modes[processor_mode (regs)],
-		thumb_mode (regs) ? " (T)" : "");
-}
-
-void do_undefined_instruction (struct pt_regs *pt_regs)
-{
-	printf ("undefined instruction\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_software_interrupt (struct pt_regs *pt_regs)
-{
-	printf ("software interrupt\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_prefetch_abort (struct pt_regs *pt_regs)
-{
-	printf ("prefetch abort\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_data_abort (struct pt_regs *pt_regs)
-{
-	printf ("data abort\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_not_used (struct pt_regs *pt_regs)
-{
-	printf ("not used\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_fiq (struct pt_regs *pt_regs)
-{
-	printf ("fast interrupt request\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-void do_irq (struct pt_regs *pt_regs)
-{
-	printf ("interrupt request\n");
-	show_regs (pt_regs);
-	bad_mode ();
-}
-
-
-int interrupt_init (void)
-{
-
-/* we don't use interrupt */
-	return(0);
-}
-
-/*
- * timer without interrupts
- */
-
-void reset_timer (void)
-{
-	reset_timer_masked ();
-}
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked ();
-}
-
-void set_timer (ulong t)
-{
-/* Nop	*/
-}
-
-void udelay (unsigned long usec)
-{
-	udelay_masked (usec);
-}
-
-void reset_timer_masked (void)
-{
-	u32 	tmp;
-	MX1_TCTL1       = 0x09;
-	tmp = 0x1f;		/* a little delay for timer to reset */
-	MX1_TPRER1	= 0x1f;
-	MX1_TCTL1	= 0x19;
-}
-
-ulong get_timer_masked (void)
-{
-	return MX1_TCN1;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-
-	tmo = usec / 1000;
-	tmo *= CFG_HZ;
-	tmo /= 1000;
-
-	reset_timer_masked ();
-
-	while (get_timer_masked () < tmo);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-
-ulong  get_tbclk (void) {
-	return CFG_HZ;
-}
diff --git a/cpu/mc9328/serial.c b/cpu/mc9328/serial.c
deleted file mode 100644
index 8dcfb80..0000000
--- a/cpu/mc9328/serial.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * cpu/mc9328/serial.c
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mc9328.h>
-
-#if defined(CONFIG_UART1)
-/* GPIO PORT B 		*/
-
-#define reg_GIUS	MX1_GIUS_C
-#define reg_GPR		MX1_GPR_B
-#define GPIO_MASK	0xFFFFE1FF
-#define UART_BASE	0x00206000
-
-#elif defined (CONFIG_UART2)
-/* GPIO PORT C  	*/
-
-#define reg_GIUS	MX1_GIUS_C
-#define reg_GPR		MX1_GPR_C
-#define GPIO_MASK 	0x0FFFFFFF
-#define UART_BASE	0x207000
-
-#endif
-
-#define reg_URXD	(*((volatile u32 *)(UART_BASE+0x00)))
-#define reg_UTXD	(*((volatile u32 *)(UART_BASE+0x40)))
-#define reg_UCR1	(*((volatile u32 *)(UART_BASE+0x80)))
-#define reg_UCR2	(*((volatile u32 *)(UART_BASE+0x84)))
-#define reg_UCR3	(*((volatile u32 *)(UART_BASE+0x88)))
-#define reg_UCR4	(*((volatile u32 *)(UART_BASE+0x8C)))
-#define reg_UFCR	(*((volatile u32 *)(UART_BASE+0x90)))
-#define reg_USR1	(*((volatile u32 *)(UART_BASE+0x94)))
-#define reg_USR2	(*((volatile u32 *)(UART_BASE+0x98)))
-#define reg_UESC	(*((volatile u32 *)(UART_BASE+0x9C)))
-#define reg_UTIM	(*((volatile u32 *)(UART_BASE+0xA0)))
-#define reg_UBIR	(*((volatile u32 *)(UART_BASE+0xA4)))
-#define reg_UBMR	(*((volatile u32 *)(UART_BASE+0xA8)))
-#define reg_UBRC	(*((volatile u32 *)(UART_BASE+0xAC)))
-
-#define TXFE_MASK	0x4000  	/* Tx buffer empty	*/
-#define RDR_MASK	0x0001		/* receive data ready	*/
-
-void serial_setbrg (void) {
-
-	/* config I/O pins for UART 	*/
-	reg_GIUS 	&= GPIO_MASK;
-	reg_GPR		&= GPIO_MASK;
-
-	/* config UART			*/
-	reg_UCR1 	= 5;
-	reg_UCR2 	= 0x4027;
-	reg_UCR4 	= 1;
-	reg_UFCR 	= 0xA81;
-
-	reg_UBIR 	= 0xF;
-	reg_UBMR 	= 0x8A;
-	reg_UBRC 	= 8;
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-
-int serial_init (void) {
-	serial_setbrg ();
-
-	return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-int serial_getc (void) {
-
-	while (!(reg_USR2 & RDR_MASK)) ; 	/* wait until RDR bit set 		*/
-
-	return (u8)reg_URXD;
-}
-
-/*
- * Output a single byte to the serial port.
- */
-void serial_putc (const char c) {
-
-	while (!(reg_USR2 & TXFE_MASK));	/* wait until TXFE bit set		*/
-
-	reg_UTXD = (u16) c;
-
-	if (c == '\n')	{			/* carriage return ? append line-feed	*/
-		while (!(reg_USR2 & TXFE_MASK));	/* wait until TXFE bit set	*/
-		reg_UTXD = '\r';
-	}
-
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-int serial_tstc (void) {
-	return reg_USR2 & RDR_MASK;
-}
-
-void serial_puts (const char *s) {
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
diff --git a/cpu/mc9328/start.S b/cpu/mc9328/start.S
deleted file mode 100644
index edfce12..0000000
--- a/cpu/mc9328/start.S
+++ /dev/null
@@ -1,388 +0,0 @@
-/*
- *  armboot - Startup Code for ARM920 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b       reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
-	.word	TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
-	.word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
-	.word __bss_start
-
-.globl _bss_end
-_bss_end:
-	.word _end
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifdef CONFIG_INIT_CRITICAL
-	bl	cpu_init_crit
-#endif
-
-relocate:				/* relocate U-Boot to RAM	    */
-	adr	r0, _start		/* r0 <- current position of code   */
-	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
-	cmp     r0, r1                  /* don't reloc during debug         */
-	beq     stack_setup
-
-	ldr	r2, _armboot_start
-	ldr	r3, _bss_start
-	sub	r2, r3, r2		/* r2 <- size of armboot            */
-	add	r2, r0, r2		/* r2 <- source end address         */
-
-copy_loop:
-	ldmia	r0!, {r3-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r3-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end addreee [r2]    */
-	ble	copy_loop
-
-	/* Set up the stack						    */
-stack_setup:
-	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN	/* malloc area                      */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo                        */
-#ifdef CONFIG_USE_IRQ
-	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
-#endif
-	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
-
-clear_bss:
-	ldr	r0, _bss_start		/* find start of bss segment        */
-	ldr	r1, _bss_end		/* stop here                        */
-	mov 	r2, #0x00000000		/* clear                            */
-
-clbss_l:str	r2, [r0]		/* clear loop...                    */
-	add	r0, r0, #4
-	cmp	r0, r1
-	bne	clbss_l
-
-	ldr	pc, _start_armboot
-
-_start_armboot:	.word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	mcr	p15, 0, r0, c1, c0, 0
-
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a memsetup.S in your board directory.
-	 */
-	mov	ip, lr
-	bl	memsetup
-	mov	lr, ip
-
-	mov	pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)  @ set base 2 words into abort stack
-	ldmia	r2, {r2 - r3}			@ get pc, cpsr
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add     r8, sp, #S_PC
-	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
-	str     lr, [r8, #0]                    @ Save calling PC
-	mrs     r6, spsr
-	str     r6, [r8, #4]                    @ Save CPSR
-	str     r0, [r8, #8]                    @ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str     lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl 	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl 	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl 	do_fiq
-
-#endif
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	mov     ip, #0
-	mcr     p15, 0, ip, c7, c7, 0           @ invalidate cache
-	mcr     p15, 0, ip, c8, c7, 0           @ flush TLB (v4)
-	mrc     p15, 0, ip, c1, c0, 0           @ get ctrl register
-	bic     ip, ip, #0x000f                 @ ............wcam
-	bic     ip, ip, #0x2100                 @ ..v....s........
-	mcr     p15, 0, ip, c1, c0, 0           @ ctrl register
-	mov     pc, r0
diff --git a/cpu/mpc824x/cpu_init.c b/cpu/mpc824x/cpu_init.c
index 08f5c4a..d0c7a3b 100644
--- a/cpu/mpc824x/cpu_init.c
+++ b/cpu/mpc824x/cpu_init.c
@@ -108,7 +108,7 @@ cpu_init_f (void)
 
 	CONFIG_READ_BYTE(PCMBCR,val);
 	/* in order not to corrupt data which is being read over the PCI bus
-	* with the PPC as master, we need to reduce the number of PCMRBs to 1,
+	* with the PPC as slave, we need to reduce the number of PCMRBs to 1,
 	* 4.11 in the  processor user manual
 	* */
 
@@ -117,6 +117,10 @@ cpu_init_f (void)
 #else
 	CONFIG_WRITE_BYTE(PCMBCR,(val|0x80)); /* 2 PCMRBs */
 	CONFIG_WRITE_BYTE(PCMBCR,(val|0x40)); /* 3 PCMRBs */
+	/* default, 4 PCMRBs are used, so don't change the
+	 * register is this is _really_ what you want: data
+	 * corruption with no performance gain
+	 */
 #endif
 #endif
 
diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c
index d40cd8c..787f7fa 100644
--- a/cpu/mpc85xx/speed.c
+++ b/cpu/mpc85xx/speed.c
@@ -33,7 +33,6 @@
 
 void get_sys_info (sys_info_t * sysInfo)
 {
-	DECLARE_GLOBAL_DATA_PTR;
 	volatile immap_t    *immap = (immap_t *)CFG_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;
 	uint plat_ratio,e500_ratio;
diff --git a/cpu/mpc8xx/scc.c b/cpu/mpc8xx/scc.c
index 78b2f99..6b9110f 100644
--- a/cpu/mpc8xx/scc.c
+++ b/cpu/mpc8xx/scc.c
@@ -193,6 +193,10 @@ static int scc_init (struct eth_device *dev, bd_t * bis)
 
 	volatile immap_t *immr = (immap_t *) CFG_IMMR;
 
+#if defined(CONFIG_LWMON)
+	reset_phy();
+#endif
+
 #ifdef CONFIG_FADS
 #if defined(CONFIG_MPC86xADS) || defined(CONFIG_MPC860T)
 	/* The MPC86xADS/FADS860T don't use the MODEM_EN or DATA_VOICE signals. */
@@ -550,6 +554,8 @@ static void scc_halt (struct eth_device *dev)
 
 	immr->im_cpm.cp_scc[SCC_ENET].scc_gsmrl &=
 		~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+
+	immr->im_ioport.iop_pcso  &=  ~(PC_ENET_CLSN | PC_ENET_RENA);
 }
 
 #if 0
diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c
index 71f3ae1..fa0405f 100644
--- a/cpu/mpc8xx/serial.c
+++ b/cpu/mpc8xx/serial.c
@@ -24,49 +24,44 @@
 #include <common.h>
 #include <commproc.h>
 #include <command.h>
+#include <serial.h>
 #include <watchdog.h>
 
 #if !defined(CONFIG_8xx_CONS_NONE)	/* No Console at all */
 
 #if defined(CONFIG_8xx_CONS_SMC1)	/* Console on SMC1 */
 #define	SMC_INDEX	0
-#undef 	SCC_INDEX
 #define PROFF_SMC	PROFF_SMC1
 #define CPM_CR_CH_SMC	CPM_CR_CH_SMC1
 
 #elif defined(CONFIG_8xx_CONS_SMC2)	/* Console on SMC2 */
 #define SMC_INDEX	1
-#undef 	SCC_INDEX
 #define PROFF_SMC	PROFF_SMC2
 #define CPM_CR_CH_SMC	CPM_CR_CH_SMC2
 
-#elif defined(CONFIG_8xx_CONS_SCC1)	/* Console on SCC1 */
-#undef  SMC_INDEX
+#endif /* CONFIG_8xx_CONS_SMCx */
+
+#if defined(CONFIG_8xx_CONS_SCC1)	/* Console on SCC1 */
 #define SCC_INDEX	0
 #define PROFF_SCC	PROFF_SCC1
 #define CPM_CR_CH_SCC	CPM_CR_CH_SCC1
 
 #elif defined(CONFIG_8xx_CONS_SCC2)	/* Console on SCC2 */
-#undef  SMC_INDEX
 #define SCC_INDEX	1
 #define PROFF_SCC	PROFF_SCC2
 #define CPM_CR_CH_SCC	CPM_CR_CH_SCC2
 
 #elif defined(CONFIG_8xx_CONS_SCC3)	/* Console on SCC3 */
-#undef  SMC_INDEX
 #define SCC_INDEX	2
 #define PROFF_SCC	PROFF_SCC3
 #define CPM_CR_CH_SCC	CPM_CR_CH_SCC3
 
 #elif defined(CONFIG_8xx_CONS_SCC4)	/* Console on SCC4 */
-#undef  SMC_INDEX
 #define SCC_INDEX	3
 #define PROFF_SCC	PROFF_SCC4
 #define CPM_CR_CH_SCC	CPM_CR_CH_SCC4
 
-#else /* CONFIG_8xx_CONS_? */
-#error "console not correctly defined"
-#endif
+#endif /* CONFIG_8xx_CONS_SCCx */
 
 static void serial_setdivisor(volatile cpm8xx_t *cp)
 {
@@ -96,7 +91,23 @@ static void serial_setdivisor(volatile cpm8xx_t *cp)
  * as serial console interface.
  */
 
-int serial_init (void)
+static void smc_setbrg (void)
+{
+	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
+
+	/* Set up the baud rate generator.
+	 * See 8xx_io/commproc.c for details.
+	 *
+	 * Wire BRG1 to SMCx
+	 */
+
+	cp->cp_simode = 0x00000000;
+
+	serial_setdivisor(cp);
+}
+
+static int smc_init (void)
 {
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile smc_t *sp;
@@ -217,7 +228,7 @@ int serial_init (void)
 
 	/* Set up the baud rate generator.
 	*/
-	serial_setbrg ();
+	smc_setbrg ();
 
 	/* Make the first buffer the only buffer.
 	*/
@@ -247,39 +258,8 @@ int serial_init (void)
 	return (0);
 }
 
-void
-serial_setbrg (void)
-{
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG1 to SMCx
-	 */
-
-	cp->cp_simode = 0x00000000;
-
-	serial_setdivisor(cp);
-}
-
-#ifdef CONFIG_MODEM_SUPPORT
-void disable_putc(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	gd->be_quiet = 1;
-}
-
-void enable_putc(void)
-{
-	DECLARE_GLOBAL_DATA_PTR;
-	gd->be_quiet = 0;
-}
-#endif
-
-void
-serial_putc(const char c)
+static void
+smc_putc(const char c)
 {
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
@@ -295,7 +275,7 @@ serial_putc(const char c)
 #endif
 
 	if (c == '\n')
-		serial_putc ('\r');
+		smc_putc ('\r');
 
 	up = (smc_uart_t *)&cpmp->cp_dparam[PROFF_SMC];
 
@@ -317,8 +297,16 @@ serial_putc(const char c)
 	}
 }
 
-int
-serial_getc(void)
+static void
+smc_puts (const char *s)
+{
+	while (*s) {
+		smc_putc (*s++);
+	}
+}
+
+static int
+smc_getc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
@@ -344,8 +332,8 @@ serial_getc(void)
 	return(c);
 }
 
-int
-serial_tstc()
+static int
+smc_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile smc_uart_t	*up;
@@ -359,9 +347,41 @@ serial_tstc()
 	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
 }
 
-#else	/* ! CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */
+struct serial_device serial_smc_device =
+{
+	"serial_smc",
+	"SMC",
+	smc_init,
+	smc_setbrg,
+	smc_getc,
+	smc_tstc,
+	smc_putc,
+	smc_puts,
+};
+
+#endif /* CONFIG_8xx_CONS_SMC1 || CONFIG_8xx_CONS_SMC2 */
+
+#if defined(CONFIG_8xx_CONS_SCC1) || defined(CONFIG_8xx_CONS_SCC2) || \
+    defined(CONFIG_8xx_CONS_SCC3) || defined(CONFIG_8xx_CONS_SCC4)
+
+static void
+scc_setbrg (void)
+{
+	volatile immap_t *im = (immap_t *)CFG_IMMR;
+	volatile cpm8xx_t *cp = &(im->im_cpm);
 
-int serial_init (void)
+	/* Set up the baud rate generator.
+	 * See 8xx_io/commproc.c for details.
+	 *
+	 * Wire BRG1 to SCCx
+	 */
+
+	cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
+
+	serial_setdivisor(cp);
+}
+
+static int scc_init (void)
 {
 	volatile immap_t *im = (immap_t *)CFG_IMMR;
 	volatile scc_t *sp;
@@ -426,7 +446,7 @@ int serial_init (void)
 #ifdef CFG_ALLOC_DPRAM
 	dpaddr = dpram_alloc_align (sizeof(cbd_t)*2 + 2, 8) ;
 #else
-	dpaddr = CPM_SERIAL_BASE ;
+	dpaddr = CPM_SERIAL2_BASE ;
 #endif
 
 	/* Enable SDMA.
@@ -446,7 +466,7 @@ int serial_init (void)
 
 	/* Set up the baud rate generator.
 	*/
-	serial_setbrg ();
+	scc_setbrg ();
 
 	/* Set up the uart parameters in the parameter ram.
 	*/
@@ -497,9 +517,11 @@ int serial_init (void)
 
 	/* Set UART mode, clock divider 16 on Tx and Rx
 	 */
+	sp->scc_gsmrl &= ~0xF;
 	sp->scc_gsmrl |=
 		(SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
 
+	sp->scc_psmr  = 0;
 	sp->scc_psmr  |= SCU_PSMR_CL;
 
 	/* Mask all interrupts and remove anything pending.
@@ -521,25 +543,8 @@ int serial_init (void)
 	return (0);
 }
 
-void
-serial_setbrg (void)
-{
-	volatile immap_t *im = (immap_t *)CFG_IMMR;
-	volatile cpm8xx_t *cp = &(im->im_cpm);
-
-	/* Set up the baud rate generator.
-	 * See 8xx_io/commproc.c for details.
-	 *
-	 * Wire BRG1 to SCCx
-	 */
-
-	cp->cp_sicr &= ~(0x000000FF << (8 * SCC_INDEX));
-
-	serial_setdivisor(cp);
-}
-
-void
-serial_putc(const char c)
+static void
+scc_putc(const char c)
 {
 	volatile cbd_t		*tbdf;
 	volatile char		*buf;
@@ -547,8 +552,15 @@ serial_putc(const char c)
 	volatile immap_t	*im = (immap_t *)CFG_IMMR;
 	volatile cpm8xx_t	*cpmp = &(im->im_cpm);
 
+#ifdef CONFIG_MODEM_SUPPORT
+	DECLARE_GLOBAL_DATA_PTR;
+
+	if (gd->be_quiet)
+		return;
+#endif
+
 	if (c == '\n')
-		serial_putc ('\r');
+		scc_putc ('\r');
 
 	up = (scc_uart_t *)&cpmp->cp_dparam[PROFF_SCC];
 
@@ -570,8 +582,16 @@ serial_putc(const char c)
 	}
 }
 
-int
-serial_getc(void)
+static void
+scc_puts (const char *s)
+{
+	while (*s) {
+		scc_putc (*s++);
+	}
+}
+
+static int
+scc_getc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile unsigned char	*buf;
@@ -597,8 +617,8 @@ serial_getc(void)
 	return(c);
 }
 
-int
-serial_tstc()
+static int
+scc_tstc(void)
 {
 	volatile cbd_t		*rbdf;
 	volatile scc_uart_t	*up;
@@ -612,36 +632,66 @@ serial_tstc()
 	return(!(rbdf->cbd_sc & BD_SC_EMPTY));
 }
 
-#endif	/* CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2 */
-
+struct serial_device serial_scc_device =
+{
+	"serial_scc",
+	"SCC",
+	scc_init,
+	scc_setbrg,
+	scc_getc,
+	scc_tstc,
+	scc_putc,
+	scc_puts,
+};
+
+#endif	/* CONFIG_8xx_CONS_SCCx */
 
-void
-serial_puts (const char *s)
+#ifdef CONFIG_MODEM_SUPPORT
+void disable_putc(void)
 {
-	while (*s) {
-		serial_putc (*s++);
-	}
+	DECLARE_GLOBAL_DATA_PTR;
+	gd->be_quiet = 1;
 }
 
+void enable_putc(void)
+{
+	DECLARE_GLOBAL_DATA_PTR;
+	gd->be_quiet = 0;
+}
+#endif
 
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 
 void
 kgdb_serial_init(void)
 {
+	int i = -1;
+
+	if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+	{
 #if defined(CONFIG_8xx_CONS_SMC1)
-	serial_printf("[on SMC1] ");
+		i = 1;
 #elif defined(CONFIG_8xx_CONS_SMC2)
-	serial_printf("[on SMC2] ");
-#elif defined(CONFIG_8xx_CONS_SCC1)
-	serial_printf("[on SCC1] ");
+		i = 2;
+#endif
+	}
+	else if (strcmp(default_serial_console()->ctlr, "SMC") == 0)
+	{
+#if defined(CONFIG_8xx_CONS_SCC1)
+		i = 1;
 #elif defined(CONFIG_8xx_CONS_SCC2)
-	serial_printf("[on SCC2] ");
+		i = 2;
 #elif defined(CONFIG_8xx_CONS_SCC3)
-	serial_printf("[on SCC3] ");
+		i = 3;
 #elif defined(CONFIG_8xx_CONS_SCC4)
-	serial_printf("[on SCC4] ");
+		i = 4;
 #endif
+	}
+
+	if (i >= 0)
+	{
+		serial_printf("[on %s%d] ", default_serial_console()->ctlr, i);
+	}
 }
 
 void
diff --git a/cpu/mpc8xx/spi.c b/cpu/mpc8xx/spi.c
index 5d75207..9213d10 100644
--- a/cpu/mpc8xx/spi.c
+++ b/cpu/mpc8xx/spi.c
@@ -39,7 +39,7 @@
 #include <linux/ctype.h>
 #include <malloc.h>
 #include <post.h>
-#include <net.h>
+#include <serial.h>
 
 #if (defined(CONFIG_SPI)) || (CONFIG_POST & CFG_POST_SPI)
 
@@ -542,13 +542,13 @@ int spi_post_test (int flags)
 	cp->cp_spmode &= ~SPMODE_LOOP;
 
 	/*
-	 * SCC2 Ethernet parameter RAM space overlaps
+	 * SCC2 parameter RAM space overlaps
 	 * the SPI parameter RAM space. So we need to restore
-	 * the SCC2 configuration if it is used by UART or Ethernet.
+	 * the SCC2 configuration if it is used by UART.
 	 */
 
-#if defined(CONFIG_8xx_CONS_SCC2)
-	serial_init ();
+#if !defined(CONFIG_8xx_CONS_NONE)
+	serial_reinit_all ();
 #endif
 
 	if (res != 0) {