Merge 'next' branch

Conflicts:

	board/freescale/mpc8536ds/mpc8536ds.c
	include/configs/mgcoge.h

Signed-off-by: Wolfgang Denk <wd@denx.de>

7 files changed, 50 insertions, 50 deletions

diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c
index 0ee8180..e84cb5b 100644
--- a/cpu/pxa/cpu.c
+++ b/cpu/pxa/cpu.c
@@ -44,7 +44,7 @@ int cpu_init (void)
 	 * setup up stacks if necessary
 	 */
 #ifdef CONFIG_USE_IRQ
-	IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4;
+	IRQ_STACK_START = _armboot_start - CONFIG_SYS_MALLOC_LEN - CONFIG_SYS_GBL_DATA_SIZE - 4;
 	FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ;
 #endif
 	return 0;
diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c
index df537c4..08042be 100644
--- a/cpu/pxa/i2c.c
+++ b/cpu/pxa/i2c.c
@@ -37,7 +37,7 @@
 #ifdef CONFIG_HARD_I2C
 
 /*
- *	- CFG_I2C_SPEED
+ *	- CONFIG_SYS_I2C_SPEED
  *	- I2C_PXA_SLAVE_ADDR
  */
 
@@ -48,7 +48,7 @@
 /*#define	DEBUG_I2C	1	/###* activate local debugging output  */
 #define I2C_PXA_SLAVE_ADDR	0x1	/* slave pxa unit address           */
 
-#if (CFG_I2C_SPEED == 400000)
+#if (CONFIG_SYS_I2C_SPEED == 400000)
 #define I2C_ICR_INIT	(ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
 #else
 #define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
@@ -254,7 +254,7 @@ i2c_transfer_finish:
 
 void i2c_init(int speed, int slaveaddr)
 {
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
 	/* call board specific i2c bus reset routine before accessing the   */
 	/* environment, which might be in a chip on that bus. For details   */
 	/* about this problem see doc/I2C_Edge_Conditions.                  */
@@ -329,7 +329,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
 	 * send memory address bytes;
 	 * alen defines how much bytes we have to send.
 	 */
-	/*addr &= ((1 << CFG_EEPROM_PAGE_WRITE_BITS)-1); */
+	/*addr &= ((1 << CONFIG_SYS_EEPROM_PAGE_WRITE_BITS)-1); */
 	addr_bytes[0] = (u8)((addr >>  0) & 0x000000FF);
 	addr_bytes[1] = (u8)((addr >>  8) & 0x000000FF);
 	addr_bytes[2] = (u8)((addr >> 16) & 0x000000FF);
diff --git a/cpu/pxa/interrupts.c b/cpu/pxa/interrupts.c
index 8b577e1..ec8fb9e 100644
--- a/cpu/pxa/interrupts.c
+++ b/cpu/pxa/interrupts.c
@@ -78,10 +78,10 @@ void udelay_masked (unsigned long usec)
 
 	if (usec >= 1000) {
 		tmo = usec / 1000;
-		tmo *= CFG_HZ;
+		tmo *= CONFIG_SYS_HZ;
 		tmo /= 1000;
 	} else {
-		tmo = usec * CFG_HZ;
+		tmo = usec * CONFIG_SYS_HZ;
 		tmo /= (1000*1000);
 	}
 
@@ -109,6 +109,6 @@ unsigned long long get_ticks(void)
 ulong get_tbclk (void)
 {
 	ulong tbclk;
-	tbclk = CFG_HZ;
+	tbclk = CONFIG_SYS_HZ;
 	return tbclk;
 }
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c
index 1cfede7..d735c8d 100644
--- a/cpu/pxa/mmc.c
+++ b/cpu/pxa/mmc.c
@@ -234,7 +234,7 @@ mmc_read(ulong src, uchar * dst, int size)
 	mmc_block_size = MMC_BLOCK_SIZE;
 	mmc_block_address = ~(mmc_block_size - 1);
 
-	src -= CFG_MMC_BASE;
+	src -= CONFIG_SYS_MMC_BASE;
 	end = src + size;
 	part_start = ~mmc_block_address & src;
 	part_end = ~mmc_block_address & end;
@@ -310,7 +310,7 @@ mmc_write(uchar * src, ulong dst, int size)
 	mmc_block_size = MMC_BLOCK_SIZE;
 	mmc_block_address = ~(mmc_block_size - 1);
 
-	dst -= CFG_MMC_BASE;
+	dst -= CONFIG_SYS_MMC_BASE;
 	end = dst + size;
 	part_start = ~mmc_block_address & dst;
 	part_end = ~mmc_block_address & end;
@@ -379,7 +379,7 @@ mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst)
 /****************************************************/
 {
 	int mmc_block_size = MMC_BLOCK_SIZE;
-	ulong src = blknr * mmc_block_size + CFG_MMC_BASE;
+	ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE;
 
 	mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size);
 	return blkcnt;
@@ -652,8 +652,8 @@ int mmc_ident(block_dev_desc_t * dev)
 
 int mmc2info(ulong addr)
 {
-	if (addr >= CFG_MMC_BASE
-	    && addr < CFG_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
+	if (addr >= CONFIG_SYS_MMC_BASE
+	    && addr < CONFIG_SYS_MMC_BASE + (mmc_dev.lba * mmc_dev.blksz)) {
 		return 1;
 	}
 	return 0;
diff --git a/cpu/pxa/pxafb.c b/cpu/pxa/pxafb.c
index b2caa73..97efcb6 100644
--- a/cpu/pxa/pxafb.c
+++ b/cpu/pxa/pxafb.c
@@ -60,11 +60,11 @@ vidinfo_t panel_info = {
 	vl_row:		480,
 	vl_width:	640,
 	vl_height:	480,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		0,
 	vl_splt:	0,
@@ -94,11 +94,11 @@ vidinfo_t panel_info = {
 	vl_row:		480,
 	vl_width:	157,
 	vl_height:	118,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		0,
 	vl_splt:	1,
@@ -127,11 +127,11 @@ vidinfo_t panel_info = {
 	vl_row:		240,
 	vl_width:	167,
 	vl_height:	109,
-	vl_clkp:	CFG_HIGH,
-	vl_oep:		CFG_HIGH,
-	vl_hsp:		CFG_HIGH,
-	vl_vsp:		CFG_HIGH,
-	vl_dp:		CFG_HIGH,
+	vl_clkp:	CONFIG_SYS_HIGH,
+	vl_oep:		CONFIG_SYS_HIGH,
+	vl_hsp:		CONFIG_SYS_HIGH,
+	vl_vsp:		CONFIG_SYS_HIGH,
+	vl_dp:		CONFIG_SYS_HIGH,
 	vl_bpix:	LCD_BPP,
 	vl_lbw:		1,
 	vl_splt:	0,
diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S
index 23005e2..63ab0c5 100644
--- a/cpu/pxa/start.S
+++ b/cpu/pxa/start.S
@@ -135,8 +135,8 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
-	sub	r0, r0, #CFG_MALLOC_LEN /* malloc area			    */
-	sub	r0, r0, #CFG_GBL_DATA_SIZE /* bdinfo			    */
+	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area			    */
+	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo			    */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif /* CONFIG_USE_IRQ */
@@ -191,20 +191,20 @@ OSTIMER_BASE:	.word	0x40a00000
 
 /* Clock Manager Registers						    */
 #ifdef CONFIG_CPU_MONAHANS
-# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO
-#  error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!"
-# endif /* !CFG_MONAHANS_RUN_MODE_OSC_RATIO */
-# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO
-#  define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
-# endif /* !CFG_MONAHANS_TURBO_RUN_MODE_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
+#  error "You have to define CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO!!"
+# endif /* !CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO */
+# ifndef CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO
+#  define CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO 0x1
+# endif /* !CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO */
 #else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
 CC_BASE:	.word	0x41300000
 #define CCCR	0x00
-cpuspeed:	.word	CFG_CPUSPEED
-#else /* !CFG_CPUSPEED */
-#error "You have to define CFG_CPUSPEED!!"
-#endif /* CFG_CPUSPEED */
+cpuspeed:	.word	CONFIG_SYS_CPUSPEED
+#else /* !CONFIG_SYS_CPUSPEED */
+#error "You have to define CONFIG_SYS_CPUSPEED!!"
+#endif /* CONFIG_SYS_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/* takes care the CP15 update has taken place */
@@ -245,10 +245,10 @@ cpu_init_crit:
 	/* set clock speed */
 #ifdef CONFIG_CPU_MONAHANS
 	ldr	r0, =ACCR
-	ldr	r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
+	ldr	r1, =(((CONFIG_SYS_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK))
 	str	r1, [r0]
 #else /* !CONFIG_CPU_MONAHANS */
-#ifdef CFG_CPUSPEED
+#ifdef CONFIG_SYS_CPUSPEED
 	ldr	r0, CC_BASE
 	ldr	r1, cpuspeed
 	str	r1, [r0, #CCCR]
@@ -257,7 +257,7 @@ cpu_init_crit:
 
 setspeed_done:
 
-#endif /* CFG_CPUSPEED */
+#endif /* CONFIG_SYS_CPUSPEED */
 #endif /* CONFIG_CPU_MONAHANS */
 
 	/*
@@ -336,8 +336,8 @@ setspeed_done:
 	add	r8, sp, #S_PC
 
 	ldr	r2, _armboot_start
-	sub	r2, r2, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r2, r2, #(CFG_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
+	sub	r2, r2, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r2, r2, #(CONFIG_SYS_GBL_DATA_SIZE+8)	@ set base 2 words into abort stack
 	ldmia	r2, {r2 - r4}			/* get pc, cpsr, old_r0	    */
 	add	r0, sp, #S_FRAME_SIZE		/* restore sp_SVC	    */
 
@@ -373,8 +373,8 @@ setspeed_done:
 
 	.macro get_bad_stack
 	ldr	r13, _armboot_start		@ setup our mode stack
-	sub	r13, r13, #(CONFIG_STACKSIZE+CFG_MALLOC_LEN)
-	sub	r13, r13, #(CFG_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
+	sub	r13, r13, #(CONFIG_STACKSIZE+CONFIG_SYS_MALLOC_LEN)
+	sub	r13, r13, #(CONFIG_SYS_GBL_DATA_SIZE+8) @ reserved a couple spots in abort stack
 
 	str	lr, [r13]			@ save caller lr / spsr
 	mrs	lr, spsr
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
index aa6f4b7..bd718a6 100644
--- a/cpu/pxa/usb.c
+++ b/cpu/pxa/usb.c
@@ -23,7 +23,7 @@
 
 #include <common.h>
 
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
 # if defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X)
 
 #include <asm/arch/pxa-regs.h>
@@ -109,4 +109,4 @@ int usb_cpu_init_fail(void)
 }
 
 # endif /* defined(CONFIG_CPU_MONAHANS) || defined(CONFIG_PXA27X) */
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */