diff options
author | Haavard Skinnemoen <haavard.skinnemoen@atmel.com> | 2008-05-22 11:09:59 +0200 |
---|---|---|
committer | Wolfgang Denk <wd@denx.de> | 2008-06-28 22:40:15 +0200 |
commit | 341188b9ccaa8d4462d772cc067aca8d7618633a (patch) | |
tree | d5a386491aed035ad5bf7667be7a3aa28a165123 /cpu/pxa | |
parent | fa60edfc4c952626e048c0e065f654b3c1822fa5 (diff) | |
download | u-boot-imx-341188b9ccaa8d4462d772cc067aca8d7618633a.zip u-boot-imx-341188b9ccaa8d4462d772cc067aca8d7618633a.tar.gz u-boot-imx-341188b9ccaa8d4462d772cc067aca8d7618633a.tar.bz2 |
MMC: Consolidate MMC/SD command definitions
This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.
There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.
Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Diffstat (limited to 'cpu/pxa')
-rw-r--r-- | cpu/pxa/mmc.c | 11 |
1 files changed, 7 insertions, 4 deletions
diff --git a/cpu/pxa/mmc.c b/cpu/pxa/mmc.c index 039ce0f..4495a80 100644 --- a/cpu/pxa/mmc.c +++ b/cpu/pxa/mmc.c @@ -119,7 +119,7 @@ mmc_block_read(uchar * dst, ulong src, ulong len) MMC_RDTO = 0xffff; MMC_NOB = 1; MMC_BLKLEN = len; - mmc_cmd(MMC_CMD_READ_BLOCK, argh, argl, + mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl, MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK | MMC_CMDAT_DATA_EN); @@ -568,7 +568,7 @@ mmc_init(int verbose) MMC_SPI = MMC_SPI_DISABLE; /* reset */ - mmc_cmd(MMC_CMD_RESET, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); + mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0); udelay(200000); retries = 3; while (retries--) { @@ -578,7 +578,10 @@ mmc_init(int verbose) break; } - resp = mmc_cmd(SD_CMD_APP_OP_COND, 0x0020, 0, MMC_CMDAT_R3 | (retries < 2 ? 0 : MMC_CMDAT_INIT)); /* Select 3.2-3.3 and 3.3-3.4V */ + /* Select 3.2-3.3 and 3.3-3.4V */ + resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0020, 0, + MMC_CMDAT_R3 | (retries < 2 ? 0 + : MMC_CMDAT_INIT)); if (resp[0] & 0x80000000) { mmc_dev.if_type = IF_TYPE_SD; debug("Detected SD card\n"); @@ -616,7 +619,7 @@ mmc_init(int verbose) memcpy(cid_resp, resp, sizeof(cid_resp)); /* MMC exists, get CSD too */ - resp = mmc_cmd(MMC_CMD_SET_RCA, 0, 0, MMC_CMDAT_R1); + resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1); if (IF_TYPE_SD == mmc_dev.if_type) rca = ((resp[0] & 0xffff0000) >> 16); resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2); |