Merge with git://www.denx.de/git/u-boot.git

21 files changed, 368 insertions, 121 deletions

diff --git a/cpu/ppc4xx/440spe_pcie.c b/cpu/ppc4xx/440spe_pcie.c
index d6c4be5..bf68cc1 100644
--- a/cpu/ppc4xx/440spe_pcie.c
+++ b/cpu/ppc4xx/440spe_pcie.c
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2006
+ * (C) Copyright 2006 - 2007
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * Copyright (c) 2005 Cisco Systems.  All rights reserved.
@@ -40,6 +40,34 @@ enum {
 	LNKW_X8			= 0x8
 };
 
+static inline int pcie_in_8(const volatile unsigned char __iomem *addr)
+{
+	int ret;
+
+	PCIE_IN(lbzx, ret, addr);
+
+	return ret;
+}
+
+static inline int pcie_in_le16(const volatile unsigned short __iomem *addr)
+{
+	int ret;
+
+	PCIE_IN(lhbrx, ret, addr)
+
+	return ret;
+}
+
+static inline unsigned pcie_in_le32(const volatile unsigned __iomem *addr)
+{
+	unsigned ret;
+
+	PCIE_IN(lwbrx, ret, addr);
+
+	return ret;
+}
+
+
 static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
 	int offset, int len, u32 *val) {
 
@@ -55,13 +83,13 @@ static int pcie_read_config(struct pci_controller *hose, unsigned int devfn,
 
 	switch (len) {
 	case 1:
-		*val = in_8(hose->cfg_data + offset);
+		*val = pcie_in_8(hose->cfg_data + offset);
 		break;
 	case 2:
-		*val = in_le16((u16 *)(hose->cfg_data + offset));
+		*val = pcie_in_le16((u16 *)(hose->cfg_data + offset));
 		break;
 	default:
-		*val = in_le32((u32 *)(hose->cfg_data + offset));
+		*val = pcie_in_le32((u32*)(hose->cfg_data + offset));
 		break;
 	}
 	return 0;
@@ -783,9 +811,14 @@ void ppc440spe_setup_pcie_rootpoint(struct pci_controller *hose, int port)
 	/*
 	 * Set bus numbers on our root port
 	 */
-	out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
-	out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
-	out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+	if (ppc440spe_revB()) {
+		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 1);
+		out_8((u8 *)mbase + PCI_SUBORDINATE_BUS, 1);
+	} else {
+		out_8((u8 *)mbase + PCI_PRIMARY_BUS, 0);
+		out_8((u8 *)mbase + PCI_SECONDARY_BUS, 0);
+	}
 
 	/*
 	 * Set up outbound translation to hose->mem_space from PLB
diff --git a/cpu/ppc4xx/440spe_pcie.h b/cpu/ppc4xx/440spe_pcie.h
index 2becc77..eb7cecf 100644
--- a/cpu/ppc4xx/440spe_pcie.h
+++ b/cpu/ppc4xx/440spe_pcie.h
@@ -145,8 +145,8 @@
 #define PECFG_PIMEN		0x33c
 #define PECFG_PIM0LAL		0x340
 #define PECFG_PIM0LAH		0x344
-#define PECFG_PIM1LAL     	0x348
-#define PECFG_PIM1LAH     	0x34c
+#define PECFG_PIM1LAL		0x348
+#define PECFG_PIM1LAH		0x34c
 #define PECFG_PIM01SAL		0x350
 #define PECFG_PIM01SAH		0x354
 
@@ -161,6 +161,21 @@
 	mtdcr(DCRN_SDR0_CFGADDR, offset); \
 	mtdcr(DCRN_SDR0_CFGDATA,data);})
 
+#define PCIE_IN(opcode, ret, addr) \
+	__asm__ __volatile__(			\
+		"sync\n"			\
+		#opcode " %0,0,%1\n"		\
+		"1: twi 0,%0,0\n"		\
+		"isync\n"			\
+		"b 3f\n"			\
+		"2: li %0,-1\n"			\
+		"3:\n"				\
+		".section __ex_table,\"a\"\n"	\
+		".balign 4\n"			\
+		".long 1b,2b\n"			\
+		".previous\n"			\
+		: "=r" (ret) : "r" (addr), "m" (*addr));
+
 int ppc440spe_init_pcie(void);
 int ppc440spe_init_pcie_rootport(int port);
 void yucca_setup_pcie_fpga_rootpoint(int port);
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 6d6fba1..4a4c6f2 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -269,9 +269,8 @@ struct bank_param {
 typedef struct bank_param BANKPARMS;
 
 #ifdef CFG_SIMULATE_SPD_EEPROM
-extern unsigned char cfg_simulate_spd_eeprom[128];
+extern const unsigned char cfg_simulate_spd_eeprom[128];
 #endif
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 
 static unsigned char spd_read(uchar chip, uint addr);
 static void get_spd_info(unsigned long *dimm_populated,
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 5fef27b..18b90ba 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -109,7 +109,7 @@
 /* Defines for the Read Cycle Delay test */
 #define NUMMEMTESTS	8
 #define NUMMEMWORDS	8
-#define NUMLOOPS	256		/* memory test loops */
+#define NUMLOOPS	64		/* memory test loops */
 
 #undef CONFIG_ECC_ERROR_RESET		/* test-only: see description below, at check_ecc() */
 
@@ -138,6 +138,26 @@ void __spd_ddr_init_hang (void)
 }
 void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang")));
 
+/*
+ * To provide an interface for board specific config values in this common
+ * DDR setup code, we implement he "weak" default functions here. They return
+ * the default value back to the caller.
+ *
+ * Please see include/configs/yucca.h for an example fora board specific
+ * implementation.
+ */
+u32 __ddr_wrdtr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_wrdtr(u32) __attribute__((weak, alias("__ddr_wrdtr")));
+
+u32 __ddr_clktr(u32 default_val)
+{
+	return default_val;
+}
+u32 ddr_clktr(u32) __attribute__((weak, alias("__ddr_clktr")));
+
 
 /* Private Structure Definitions */
 
@@ -154,7 +174,6 @@ typedef enum ddr_cas_id {
  * Prototypes
  *-----------------------------------------------------------------------------*/
 static unsigned long sdram_memsize(void);
-void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value);
 static void get_spd_info(unsigned long *dimm_populated,
 			 unsigned char *iic0_dimm_addr,
 			 unsigned long num_dimm_banks);
@@ -216,9 +235,7 @@ static void	test(void);
 #else
 static void	DQS_calibration_process(void);
 #endif
-#if defined(DEBUG)
 static void ppc440sp_sdram_register_dump(void);
-#endif
 int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
 void dcbz_area(u32 start_address, u32 num_bytes);
 void dflush(void);
@@ -469,17 +486,14 @@ long int initdram(int board_type)
 	 *-----------------------------------------------------------------*/
 	mfsdram(SDRAM_WRDTR, val);
 	mtsdram(SDRAM_WRDTR, (val & ~(SDRAM_WRDTR_LLWP_MASK | SDRAM_WRDTR_WTR_MASK)) |
-		(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
+		ddr_wrdtr(SDRAM_WRDTR_LLWP_1_CYC | SDRAM_WRDTR_WTR_90_DEG_ADV));
 
 	/*------------------------------------------------------------------
 	 * Set the SDRAM Clock Timing Register
 	 *-----------------------------------------------------------------*/
 	mfsdram(SDRAM_CLKTR, val);
-#ifdef CFG_44x_DDR2_CKTR_180
-	mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_180_DEG_ADV);
-#else
-	mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) | SDRAM_CLKTR_CLKP_0_DEG);
-#endif
+	mtsdram(SDRAM_CLKTR, (val & ~SDRAM_CLKTR_CLKP_MASK) |
+		ddr_clktr(SDRAM_CLKTR_CLKP_0_DEG));
 
 	/*------------------------------------------------------------------
 	 * Program the BxCF registers.
@@ -538,7 +552,12 @@ long int initdram(int board_type)
 	dram_size = sdram_memsize();
 
 	/* and program tlb entries for this size (dynamic) */
-	program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
+	/*
+	 * Program TLB entries with caches enabled, for best performace
+	 * while auto-calibrating and ECC generation
+	 */
+	program_tlb(0, 0, dram_size, 0);
 
 	/*------------------------------------------------------------------
 	 * DQS calibration.
@@ -549,12 +568,18 @@ long int initdram(int board_type)
 	/*------------------------------------------------------------------
 	 * If ecc is enabled, initialize the parity bits.
 	 *-----------------------------------------------------------------*/
-	program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, MY_TLB_WORD2_I_ENABLE);
+	program_ecc(dimm_populated, iic0_dimm_addr, num_dimm_banks, 0);
 #endif
 
-#ifdef DEBUG
+	/*
+	 * Now after initialization (auto-calibration and ECC generation)
+	 * remove the TLB entries with caches enabled and program again with
+	 * desired cache functionality
+	 */
+	remove_tlb(0, dram_size);
+	program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE);
+
 	ppc440sp_sdram_register_dump();
-#endif
 
 	return dram_size;
 }
@@ -2703,6 +2728,7 @@ calibration_loop:
 		printf("\nERROR: Cannot determine a common read delay for the "
 		       "DIMM(s) installed.\n");
 		debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__);
+		ppc440sp_sdram_register_dump();
 		spd_ddr_init_hang ();
 	}
 
@@ -3028,5 +3054,9 @@ static void ppc440sp_sdram_register_dump(void)
 	dcr_data = mfdcr(SDRAM_R3BAS);
 	printf("        MQ3_B0BAS       = 0x%08X\n", dcr_data);
 }
+#else
+static void ppc440sp_sdram_register_dump(void)
+{
+}
 #endif
 #endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 1200d02..cc8e734 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -94,9 +94,9 @@
  * network support enabled.
  * Remark: CONFIG_405 describes Xilinx PPC405 FPGA without EMAC controller!
  */
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
+#if defined(CONFIG_CMD_NET) && !defined(CONFIG_405) && !defined(CONFIG_IOP480)
 
-#if !(defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII))
+#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII))
 #error "CONFIG_MII has to be defined!"
 #endif
 
@@ -1415,10 +1415,8 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
 			if ((MAL_RX_CTRL_EMPTY & hw_p->rx[i].ctrl)
 			    || (loop_count >= NUM_RX_BUFF))
 				break;
+
 			loop_count++;
-			hw_p->rx_slot++;
-			if (NUM_RX_BUFF == hw_p->rx_slot)
-				hw_p->rx_slot = 0;
 			handled++;
 			data_len = (unsigned long) hw_p->rx[i].data_len;	/* Get len */
 			if (data_len) {
@@ -1468,6 +1466,10 @@ static void enet_rcv (struct eth_device *dev, unsigned long malisr)
 				if (NUM_RX_BUFF == hw_p->rx_i_index)
 					hw_p->rx_i_index = 0;
 
+				hw_p->rx_slot++;
+				if (NUM_RX_BUFF == hw_p->rx_slot)
+					hw_p->rx_slot = 0;
+
 				/*  AS.HARNOIS
 				 * free receive buffer only when
 				 * buffer has been handled (eth_rx)
@@ -1683,7 +1685,7 @@ int ppc_4xx_eth_initialize (bd_t * bis)
 #endif
 
 #if defined(CONFIG_NET_MULTI)
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 		miiphy_register (dev->name,
 				 emac4xx_miiphy_read, emac4xx_miiphy_write);
 #endif
@@ -1724,7 +1726,7 @@ int eth_rx(void)
 
 int emac4xx_miiphy_initialize (bd_t * bis)
 {
-#if defined(CONFIG_MII) || (CONFIG_COMMANDS & CFG_CMD_MII)
+#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
 	miiphy_register ("ppc_4xx_eth0",
 			 emac4xx_miiphy_read, emac4xx_miiphy_write);
 #endif
@@ -1733,4 +1735,4 @@ int emac4xx_miiphy_initialize (bd_t * bis)
 }
 #endif /* !defined(CONFIG_NET_MULTI) */
 
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_NET) */
+#endif
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index 4068b53..af9da5b 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -27,12 +27,12 @@ LIB	= $(obj)lib$(CPU).a
 
 START	= start.o resetvec.o kgdb.o
 SOBJS	= dcr.o
-COBJS	= 405gp_pci.o 4xx_enet.o \
+COBJS	= 405gp_pci.o 440spe_pcie.o 4xx_enet.o \
 	  bedbug_405.o commproc.o \
 	  cpu.o cpu_init.o gpio.o i2c.o interrupts.o \
 	  miiphy.o ndfc.o sdram.o serial.o \
 	  40x_spd_sdram.o 44x_spd_ddr.o 44x_spd_ddr2.o speed.o \
-	  tlb.o traps.o usb_ohci.o usbdev.o \
+	  tlb.o traps.o usb_ohci.o usb.o usbdev.o \
 	  440spe_pcie.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/ppc4xx/bedbug_405.c b/cpu/ppc4xx/bedbug_405.c
index a3c2119..5ef5607 100644
--- a/cpu/ppc4xx/bedbug_405.c
+++ b/cpu/ppc4xx/bedbug_405.c
@@ -10,7 +10,7 @@
 #include <bedbug/regs.h>
 #include <bedbug/ppc.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) && defined(CONFIG_4xx)
+#if defined(CONFIG_CMD_BEDBUG) && defined(CONFIG_4xx)
 
 #define MAX_BREAK_POINTS 4
 
diff --git a/cpu/ppc4xx/dcr.S b/cpu/ppc4xx/dcr.S
index 7102364..93465a3 100644
--- a/cpu/ppc4xx/dcr.S
+++ b/cpu/ppc4xx/dcr.S
@@ -22,7 +22,7 @@
  */
 #include <config.h>
 
-#if defined(CONFIG_4xx) && defined(CFG_CMD_SETGETDCR)
+#if defined(CONFIG_4xx) && defined(CONFIG_CMD_SETGETDCR)
 
 #include <ppc4xx.h>
 
@@ -195,4 +195,4 @@ set_dcr:
 		blr				/* Return to calling function */
 .Lfe4:		.size	set_dcr,.Lfe4-set_dcr
 /* end set_dcr() */
-#endif /* CONFIG_4xx & CFG_CMD_SETGETDCR */
+#endif
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index 5235203..50f2fdf 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void)
 						out32(GPIO0_TCR, reg);
 					}
 
+#ifdef GPIO1
 					if (gpio_core == GPIO1) {
 						/*
 						 * Setup output value
@@ -193,16 +194,17 @@ void gpio_set_chip_configuration(void)
 						 * 0 -> low level
 						 * else -> don't touch
 						 */
-						reg = in32(GPIO0_OR);
+						reg = in32(GPIO1_OR);
 						if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1)
 							reg |= (0x80000000 >> (i));
 						else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0)
 							reg &= ~(0x80000000 >> (i));
-						out32(GPIO0_OR, reg);
+						out32(GPIO1_OR, reg);
 
 						reg = in32(GPIO1_TCR) | (0x80000000 >> (i));
 						out32(GPIO1_TCR, reg);
 					}
+#endif /* GPIO1 */
 
 					reg = in32(GPIO_OS(core_add+offs))
 						& ~(GPIO_MASK >> (j*2));
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index c5a9f02..ca565cc 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -628,7 +628,7 @@ void timer_interrupt_cpu (struct pt_regs *regs)
 
 /****************************************************************************/
 
-#if (CONFIG_COMMANDS & CFG_CMD_IRQ)
+#if defined(CONFIG_CMD_IRQ)
 
 /*******************************************************************************
  *
@@ -698,4 +698,4 @@ do_irqinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	return 0;
 }
-#endif  /* CONFIG_COMMANDS & CFG_CMD_IRQ */
+#endif
diff --git a/cpu/ppc4xx/kgdb.S b/cpu/ppc4xx/kgdb.S
index be28340..8c4bbf2 100644
--- a/cpu/ppc4xx/kgdb.S
+++ b/cpu/ppc4xx/kgdb.S
@@ -34,7 +34,7 @@
 #include <asm/cache.h>
 #include <asm/mmu.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
  /*
  * cache flushing routines for kgdb
  */
@@ -75,4 +75,4 @@ kgdb_flush_cache_range:
 	SYNC
 	blr
 
-#endif /* CFG_CMD_KGDB */
+#endif
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index f63fc79..3984577 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -31,7 +31,7 @@
 
 #include <common.h>
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
+#if defined(CONFIG_CMD_NAND) && !defined(CFG_NAND_LEGACY) && \
 	(defined(CONFIG_440EP) || defined(CONFIG_440GR) ||	     \
 	 defined(CONFIG_440EPX) || defined(CONFIG_440GRX) ||	     \
 	 defined(CONFIG_405EZ))
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index d520cd3..2724d91 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -187,14 +187,14 @@ void sdram_init(void)
 		/*
 		 * Disable memory controller.
 		 */
-		mtsdram0(mem_mcopt1, 0x00000000);
+		mtsdram(mem_mcopt1, 0x00000000);
 
 		/*
 		 * Set MB0CF for bank 0.
 		 */
-		mtsdram0(mem_mb0cf, mb0cf[i].reg);
-		mtsdram0(mem_sdtr1, sdtr1);
-		mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
+		mtsdram(mem_mb0cf, mb0cf[i].reg);
+		mtsdram(mem_sdtr1, sdtr1);
+		mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64));
 
 		udelay(200);
 
@@ -203,14 +203,34 @@ void sdram_init(void)
 		 * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst
 		 * read/prefetch.
 		 */
-		mtsdram0(mem_mcopt1, 0x80800000);
+		mtsdram(mem_mcopt1, 0x80800000);
 
 		udelay(10000);
 
 		if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
 			/*
-			 * OK, size detected -> all done
+			 * OK, size detected.  Enable second bank if
+			 * defined (assumes same type as bank 0)
 			 */
+#ifdef CONFIG_SDRAM_BANK1
+			u32 b1cr = mb0cf[i].size | mb0cf[i].reg;
+
+			mtsdram(mem_mcopt1, 0x00000000);
+			mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */
+			mtsdram(mem_mcopt1, 0x80800000);
+			udelay(10000);
+
+			/*
+			 * Check if 2nd bank is really available.
+			 * If the size not equal to the size of the first
+			 * bank, then disable the 2nd bank completely.
+			 */
+			if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) !=
+			    mb0cf[i].size) {
+				mtsdram(mem_mb1cf, 0);
+				mtsdram(mem_mcopt1, 0);
+			}
+#endif
 			return;
 		}
 	}
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 62b5442..4fb9b1a 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -29,8 +29,6 @@
 
 #include <config.h>
 
-#define mtsdram0(reg, data)  mtdcr(memcfga,reg);mtdcr(memcfgd,data)
-
 #define ONE_BILLION	1000000000
 
 struct sdram_conf_s {
diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c
index e62dd9d..60712b1 100644
--- a/cpu/ppc4xx/serial.c
+++ b/cpu/ppc4xx/serial.c
@@ -448,12 +448,17 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
 	unsigned long i;
 	unsigned long est;		/* current estimate */
 	unsigned long plloutb;
+	unsigned long cpr_pllc;
 	u32 reg;
 
+	/* check the pll feedback source */
+	mfcpr(cprpllc, cpr_pllc);
+
 	get_sys_info(&sysinfo);
 
-	plloutb = ((CONFIG_SYS_CLK_FREQ * sysinfo.pllFwdDiv * sysinfo.pllFbkDiv)
-		   / sysinfo.pllFwdDivB);
+	plloutb = ((CONFIG_SYS_CLK_FREQ * ((cpr_pllc & PLLC_SRC_MASK) ?
+		sysinfo.pllFwdDivB : sysinfo.pllFwdDiv) * sysinfo.pllFbkDiv) /
+		sysinfo.pllFwdDivB);
 	udiv = 256;			/* Assume lowest possible serial clk */
 	div = plloutb / (16 * baudrate); /* total divisor */
 	umin = (plloutb / get_OPB_freq()) << 1;	/* 2 x OPB divisor */
@@ -843,7 +848,7 @@ int serial_buffered_tstc (void)
 
 #endif	/* CONFIG_SERIAL_SOFTWARE_FIFO */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 /*
   AS HARNOIS : according to CONFIG_KGDB_SER_INDEX kgdb uses serial port
   number 0 or number 1
@@ -949,7 +954,7 @@ void kgdb_interruptible (int yes)
 	return;
 }
 #endif	/* (CONFIG_KGDB_SER_INDEX & 2) */
-#endif	/* CFG_CMD_KGDB */
+#endif
 
 
 #if defined(CONFIG_SERIAL_MULTI)
diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
index 028b11a..da5330a 100644
--- a/cpu/ppc4xx/speed.c
+++ b/cpu/ppc4xx/speed.c
@@ -771,6 +771,7 @@ ulong get_PCI_freq (void)
 void get_sys_info (PPC405_SYS_INFO * sysInfo)
 {
 	unsigned long cpr_plld;
+	unsigned long cpr_pllc;
 	unsigned long cpr_primad;
 	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ/1000);
 	unsigned long primad_cpudv;
@@ -780,6 +781,7 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Read PLL Mode registers
 	 */
 	mfcpr(cprplld, cpr_plld);
+	mfcpr(cprpllc, cpr_pllc);
 
 	/*
 	 * Determine forward divider A
@@ -787,20 +789,18 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	sysInfo->pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16);
 
 	/*
-	 * Determine forward divider B (should be equal to A)
+	 * Determine forward divider B
 	 */
 	sysInfo->pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8);
-	if (sysInfo->pllFwdDivB == 0) {
+	if (sysInfo->pllFwdDivB == 0)
 		sysInfo->pllFwdDivB = 8;
-	}
 
 	/*
 	 * Determine FBK_DIV.
 	 */
 	sysInfo->pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24);
-	if (sysInfo->pllFbkDiv == 0) {
+	if (sysInfo->pllFbkDiv == 0)
 		sysInfo->pllFbkDiv = 256;
-	}
 
 	/*
 	 * Read CPR_PRIMAD register
@@ -810,30 +810,30 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Determine PLB_DIV.
 	 */
 	sysInfo->pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16);
-	if (sysInfo->pllPlbDiv == 0) {
+	if (sysInfo->pllPlbDiv == 0)
 		sysInfo->pllPlbDiv = 16;
-	}
 
 	/*
 	 * Determine EXTBUS_DIV.
 	 */
 	sysInfo->pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK);
-	if (sysInfo->pllExtBusDiv == 0) {
+	if (sysInfo->pllExtBusDiv == 0)
 		sysInfo->pllExtBusDiv = 16;
-	}
 
 	/*
 	 * Determine OPB_DIV.
 	 */
 	sysInfo->pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8);
-	if (sysInfo->pllOpbDiv == 0) {
+	if (sysInfo->pllOpbDiv == 0)
 		sysInfo->pllOpbDiv = 16;
-	}
 
 	/*
 	 * Determine the M factor
 	 */
-	m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+	if (cpr_pllc & PLLC_SRC_MASK)
+		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB;
+	else
+		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
 
 	/*
 	 * Determine VCO clock frequency
@@ -845,16 +845,17 @@ void get_sys_info (PPC405_SYS_INFO * sysInfo)
 	 * Determine CPU clock frequency
 	 */
 	primad_cpudv = ((cpr_primad & PRIMAD_CPUDV_MASK) >> 24);
-	if (primad_cpudv == 0) {
+	if (primad_cpudv == 0)
 		primad_cpudv = 16;
-	}
 
-	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / primad_cpudv;
+	sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * m) /
+		sysInfo->pllFwdDiv / primad_cpudv;
 
 	/*
 	 * Determine PLB clock frequency
 	 */
-	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) / sysInfo->pllPlbDiv;
+	sysInfo->freqPLB = (CONFIG_SYS_CLK_FREQ * m) /
+		sysInfo->pllFwdDiv / sysInfo->pllPlbDiv;
 }
 
 /********************************************
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 8ecaaea..9626b65 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -1870,28 +1870,6 @@ ppc405ep_init:
 	mtdcr	ebccfgd,r3
 #endif
 
-#ifndef CFG_CPC0_PCI
-	li	r3,CPC0_PCI_HOST_CFG_EN
-#ifdef CONFIG_BUBINGA
-	/*
-	!-----------------------------------------------------------------------
-	! Check FPGA for PCI internal/external arbitration
-	!   If board is set to internal arbitration, update cpc0_pci
-	!-----------------------------------------------------------------------
-	*/
-	addis	r5,r0,FPGA_REG1@h      /* set offset for FPGA_REG1 */
-	ori	r5,r5,FPGA_REG1@l
-	lbz	r5,0x0(r5)		/* read to get PCI arb selection */
-	andi.	r6,r5,FPGA_REG1_PCI_INT_ARB  /* using internal arbiter ?*/
-	beq	..pci_cfg_set		  /* if not set, then bypass reg write*/
-#endif
-	ori	r3,r3,CPC0_PCI_ARBIT_EN
-#else /* CFG_CPC0_PCI */
-	li	r3,CFG_CPC0_PCI
-#endif /* CFG_CPC0_PCI */
-..pci_cfg_set:
-	mtdcr	CPC0_PCI, r3		 /* Enable internal arbiter*/
-
 	/*
 	!-----------------------------------------------------------------------
 	! Check to see if chip is in bypass mode.
@@ -1947,11 +1925,50 @@ ppc405ep_init:
 ..no_pllset:
 #endif /* CONFIG_BUBINGA */
 
+#ifdef CONFIG_TAIHU
+	mfdcr	r4, CPC0_BOOT
+	andi.	r5, r4, CPC0_BOOT_SEP@l
+	bne	strap_1			/* serial eeprom present */
+	addis	r5,0,CPLD_REG0_ADDR@h
+	ori	r5,r5,CPLD_REG0_ADDR@l
+	andi.	r5, r5, 0x10
+	bne	_pci_66mhz
+#endif /* CONFIG_TAIHU */
+
+#if defined(CONFIG_ZEUS)
+	mfdcr	r4, CPC0_BOOT
+	andi.	r5, r4, CPC0_BOOT_SEP@l
+	bne	strap_1  	/* serial eeprom present */
+	lis	r3,0x0000
+	addi	r3,r3,0x3030
+	lis	r4,0x8042
+	addi	r4,r4,0x223e
+	b	1f
+strap_1:
+	mfdcr	r3, CPC0_PLLMR0
+	mfdcr	r4, CPC0_PLLMR1
+	b	1f
+#endif
+
 	addis	r3,0,PLLMR0_DEFAULT@h	    /* PLLMR0 default value */
 	ori	r3,r3,PLLMR0_DEFAULT@l	   /* */
 	addis	r4,0,PLLMR1_DEFAULT@h	    /* PLLMR1 default value */
 	ori	r4,r4,PLLMR1_DEFAULT@l	   /* */
 
+#ifdef CONFIG_TAIHU
+	b	1f
+_pci_66mhz:
+	addis	r3,0,PLLMR0_DEFAULT_PCI66@h
+	ori	r3,r3,PLLMR0_DEFAULT_PCI66@l
+	addis	r4,0,PLLMR1_DEFAULT_PCI66@h
+	ori	r4,r4,PLLMR1_DEFAULT_PCI66@l
+	b	1f
+strap_1:
+	mfdcr	r3, CPC0_PLLMR0
+	mfdcr	r4, CPC0_PLLMR1
+#endif /* CONFIG_TAIHU */
+
+1:
 	b	pll_write		  /* Write the CPC0_PLLMR with new value */
 
 pll_done:
diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c
index 049a785..098694c 100644
--- a/cpu/ppc4xx/tlb.c
+++ b/cpu/ppc4xx/tlb.c
@@ -25,7 +25,6 @@
 
 #if defined(CONFIG_440)
 
-#include <ppc4xx.h>
 #include <ppc440.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
@@ -36,6 +35,67 @@ typedef struct region {
 	unsigned long tlb_word2_i_value;
 } region_t;
 
+void remove_tlb(u32 vaddr, u32 size)
+{
+	int i;
+	u32 tlb_word0_value;
+	u32 tlb_vaddr;
+	u32 tlb_size = 0;
+
+	/* First, find the index of a TLB entry not being used */
+	for (i=0; i<PPC4XX_TLB_SIZE; i++) {
+		tlb_word0_value = mftlb1(i);
+		tlb_vaddr = TLB_WORD0_EPN_DECODE(tlb_word0_value);
+		if (((tlb_word0_value & TLB_WORD0_V_MASK) == TLB_WORD0_V_ENABLE) &&
+		    (tlb_vaddr >= vaddr)) {
+			/*
+			 * TLB is enabled and start address is lower or equal
+			 * than the area we are looking for. Now we only have
+			 * to check the size/end address for a match.
+			 */
+			switch (tlb_word0_value & TLB_WORD0_SIZE_MASK) {
+			case TLB_WORD0_SIZE_1KB:
+				tlb_size = 1 << 10;
+				break;
+			case TLB_WORD0_SIZE_4KB:
+				tlb_size = 4 << 10;
+				break;
+			case TLB_WORD0_SIZE_16KB:
+				tlb_size = 16 << 10;
+				break;
+			case TLB_WORD0_SIZE_64KB:
+				tlb_size = 64 << 10;
+				break;
+			case TLB_WORD0_SIZE_256KB:
+				tlb_size = 256 << 10;
+				break;
+			case TLB_WORD0_SIZE_1MB:
+				tlb_size = 1 << 20;
+				break;
+			case TLB_WORD0_SIZE_16MB:
+				tlb_size = 16 << 20;
+				break;
+			case TLB_WORD0_SIZE_256MB:
+				tlb_size = 256 << 20;
+				break;
+			}
+
+			/*
+			 * Now check the end-address if it's in the range
+			 */
+			if ((tlb_vaddr + tlb_size - 1) <= (vaddr + size - 1))
+				/*
+				 * Found a TLB in the range.
+				 * Disable it by writing 0 to tlb0 word.
+				 */
+				mttlb1(i, 0);
+		}
+	}
+
+	/* Execute an ISYNC instruction so that the new TLB entry takes effect */
+	asm("isync");
+}
+
 static int add_tlb_entry(unsigned long phys_addr,
 			 unsigned long virt_addr,
 			 unsigned long tlb_word0_size_value,
diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c
index eb9420e..f5365cb 100755..100644
--- a/cpu/ppc4xx/traps.c
+++ b/cpu/ppc4xx/traps.c
@@ -38,7 +38,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 int (*debugger_exception_handler)(struct pt_regs *) = 0;
 #endif
 
@@ -78,7 +78,7 @@ static __inline__ unsigned long get_esr(void)
 #define ESR_DIZ 0x00400000
 #define ESR_U0F 0x00008000
 
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
 extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
@@ -147,18 +147,25 @@ MachineCheckException(struct pt_regs *regs)
 	unsigned long fixup, val;
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
 	u32 value2;
+	int corr_ecc = 0;
+	int uncorr_ecc = 0;
 #endif
 
-	/* Probing PCI using config cycles cause this exception
-	 * when a device is not present.  Catch it and return to
-	 * the PCI exception handler.
+	/* Probing PCI(E) using config cycles may cause this exception
+	 * when a device is not present. To gracefully recover in such
+	 * scenarios config read/write routines need to be instrumented in
+	 * order to return via fixup handler. For examples refer to
+	 * pcie_in_8(), pcie_in_le16() and pcie_in_le32()
 	 */
 	if ((fixup = search_exception_table(regs->nip)) != 0) {
 		regs->nip = fixup;
+		val = mfspr(MCSR);
+		/* Clear MCSR */
+		mtspr(SPRN_MCSR, val);
 		return;
 	}
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -214,14 +221,22 @@ MachineCheckException(struct pt_regs *regs)
 		printf("DDR0: At least one interrupt active\n");
 	if (val & 0x40)
 		printf("DDR0: DRAM initialization complete.\n");
-	if (val & 0x20)
+	if (val & 0x20) {
 		printf("DDR0: Multiple uncorrectable ECC events.\n");
-	if (val & 0x10)
+		uncorr_ecc = 1;
+	}
+	if (val & 0x10) {
 		printf("DDR0: Single uncorrectable ECC event.\n");
-	if (val & 0x08)
+		uncorr_ecc = 1;
+	}
+	if (val & 0x08) {
 		printf("DDR0: Multiple correctable ECC events.\n");
-	if (val & 0x04)
+		corr_ecc = 1;
+	}
+	if (val & 0x04) {
 		printf("DDR0: Single correctable ECC event.\n");
+		corr_ecc = 1;
+	}
 	if (val & 0x02)
 		printf("Multiple accesses outside the defined"
 		       " physical memory space detected\n");
@@ -252,11 +267,11 @@ MachineCheckException(struct pt_regs *regs)
 		printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2);
 	}
 	mfsdram(DDR0_23, val);
-	if ( (val >> 16) & 0xff)
+	if (((val >> 16) & 0xff) && corr_ecc)
 		printf("DDR0: Syndrome for correctable ECC event 0x%x\n",
 		       (val >> 16) & 0xff);
 	mfsdram(DDR0_23, val);
-	if ( (val >> 8) & 0xff)
+	if (((val >> 8) & 0xff) && uncorr_ecc)
 		printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n",
 		       (val >> 8) & 0xff);
 	mfsdram(DDR0_33, val);
@@ -264,28 +279,28 @@ MachineCheckException(struct pt_regs *regs)
 		printf("DDR0: Address of command that caused an "
 		       "Out-of-Range interrupt %p\n", val);
 	mfsdram(DDR0_34, val);
-	if (val)
+	if (val && uncorr_ecc)
 		printf("DDR0: Address of uncorrectable ECC event %p\n", val);
 	mfsdram(DDR0_35, val);
-	if (val)
+	if (val && uncorr_ecc)
 		printf("DDR0: Address of uncorrectable ECC event %p\n", val);
 	mfsdram(DDR0_36, val);
-	if (val)
+	if (val && uncorr_ecc)
 		printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
 	mfsdram(DDR0_37, val);
-	if (val)
+	if (val && uncorr_ecc)
 		printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val);
 	mfsdram(DDR0_38, val);
-	if (val)
+	if (val && corr_ecc)
 		printf("DDR0: Address of correctable ECC event %p\n", val);
 	mfsdram(DDR0_39, val);
-	if (val)
+	if (val && corr_ecc)
 		printf("DDR0: Address of correctable ECC event %p\n", val);
 	mfsdram(DDR0_40, val);
-	if (val)
+	if (val && corr_ecc)
 		printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
 	mfsdram(DDR0_41, val);
-	if (val)
+	if (val && corr_ecc)
 		printf("DDR0: Data of correctable ECC event 0x%08x\n", val);
 #endif /* CONFIG_440EPX */
 #endif /* CONFIG_440 */
@@ -297,7 +312,7 @@ MachineCheckException(struct pt_regs *regs)
 void
 AlignmentException(struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -312,7 +327,7 @@ ProgramCheckException(struct pt_regs *regs)
 {
 	long esr_val;
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -349,7 +364,7 @@ DecrementerPITException(struct pt_regs *regs)
 void
 UnknownException(struct pt_regs *regs)
 {
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
@@ -364,7 +379,7 @@ DebugException(struct pt_regs *regs)
 {
 	printf("Debugger trap at @ %lx\n", regs->nip );
 	show_regs(regs);
-#if (CONFIG_COMMANDS & CFG_CMD_BEDBUG)
+#if defined(CONFIG_CMD_BEDBUG)
 	do_bedbug_breakpoint( regs );
 #endif
 }
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
new file mode 100644
index 0000000..272ed8c
--- /dev/null
+++ b/cpu/ppc4xx/usb.c
@@ -0,0 +1,50 @@
+/*
+ * (C) Copyright 2007
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+
+#include "usbdev.h"
+
+int usb_cpu_init(void)
+{
+
+#if defined(CONFIG_440EP) || defined(CONFIG_440EPX)
+	usb_dev_init();
+#endif
+
+	return 0;
+}
+
+int usb_cpu_stop(void)
+{
+	return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+	return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
index 6140d2a..5924a6c 100644
--- a/cpu/ppc4xx/usbdev.c
+++ b/cpu/ppc4xx/usbdev.c
@@ -3,7 +3,7 @@
 #include <common.h>
 #include <asm/processor.h>
 
-#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && (CONFIG_COMMANDS & CFG_CMD_USB)
+#if (defined(CONFIG_440EP) || defined(CONFIG_440EPX)) && defined(CONFIG_CMD_USB)
 
 #include <usb.h>
 #include "usbdev.h"