summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx
diff options
context:
space:
mode:
authorWolfgang Denk <wd@denx.de>2008-10-18 21:59:44 +0200
committerWolfgang Denk <wd@denx.de>2008-10-18 21:59:44 +0200
commitf82642e33899766892499b163e60560fbbf87773 (patch)
treeab90f076f18e56b2b3e8c9375b95917daa78c1d9 /cpu/ppc4xx
parentb59b16ca24bc7e77ec113021a6d77b9b32fcf192 (diff)
parent360fe71e82b83e264c964c9447c537e9a1f643c8 (diff)
downloadu-boot-imx-f82642e33899766892499b163e60560fbbf87773.zip
u-boot-imx-f82642e33899766892499b163e60560fbbf87773.tar.gz
u-boot-imx-f82642e33899766892499b163e60560fbbf87773.tar.bz2
Merge 'next' branch
Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
Diffstat (limited to 'cpu/ppc4xx')
-rw-r--r--cpu/ppc4xx/40x_spd_sdram.c10
-rw-r--r--cpu/ppc4xx/44x_spd_ddr.c22
-rw-r--r--cpu/ppc4xx/44x_spd_ddr2.c80
-rw-r--r--cpu/ppc4xx/4xx_enet.c20
-rw-r--r--cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c8
-rw-r--r--cpu/ppc4xx/4xx_pci.c44
-rw-r--r--cpu/ppc4xx/4xx_pcie.c144
-rw-r--r--cpu/ppc4xx/4xx_uart.c44
-rw-r--r--cpu/ppc4xx/cache.S4
-rw-r--r--cpu/ppc4xx/commproc.c12
-rw-r--r--cpu/ppc4xx/cpu.c6
-rw-r--r--cpu/ppc4xx/cpu_init.c100
-rw-r--r--cpu/ppc4xx/denali_data_eye.c2
-rw-r--r--cpu/ppc4xx/denali_spd_ddr2.c22
-rw-r--r--cpu/ppc4xx/ecc.c4
-rw-r--r--cpu/ppc4xx/ecc.h6
-rw-r--r--cpu/ppc4xx/gpio.c8
-rw-r--r--cpu/ppc4xx/i2c.c24
-rw-r--r--cpu/ppc4xx/ndfc.c10
-rw-r--r--cpu/ppc4xx/sdram.c46
-rw-r--r--cpu/ppc4xx/sdram.h20
-rw-r--r--cpu/ppc4xx/start.S344
-rw-r--r--cpu/ppc4xx/usb.c4
-rw-r--r--cpu/ppc4xx/usb_ohci.c6
-rw-r--r--cpu/ppc4xx/usbdev.h44
25 files changed, 517 insertions, 517 deletions
diff --git a/cpu/ppc4xx/40x_spd_sdram.c b/cpu/ppc4xx/40x_spd_sdram.c
index b21b13e..57861b3 100644
--- a/cpu/ppc4xx/40x_spd_sdram.c
+++ b/cpu/ppc4xx/40x_spd_sdram.c
@@ -52,12 +52,12 @@
/*
* Set default values
*/
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED 50000
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE 0xFE
+#ifndef CONFIG_SYS_I2C_SLAVE
+#define CONFIG_SYS_I2C_SLAVE 0xFE
#endif
#define ONE_BILLION 1000000000
@@ -163,7 +163,7 @@ long int spd_sdram(int(read_spd)(uint addr))
* Make sure I2C controller is initialized
* before continuing.
*/
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
}
/* Make shure we are using SDRAM */
diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c
index 9efcede..153391e 100644
--- a/cpu/ppc4xx/44x_spd_ddr.c
+++ b/cpu/ppc4xx/44x_spd_ddr.c
@@ -62,12 +62,12 @@
/*
* Set default values
*/
-#ifndef CFG_I2C_SPEED
-#define CFG_I2C_SPEED 50000
+#ifndef CONFIG_SYS_I2C_SPEED
+#define CONFIG_SYS_I2C_SPEED 50000
#endif
-#ifndef CFG_I2C_SLAVE
-#define CFG_I2C_SLAVE 0xFE
+#ifndef CONFIG_SYS_I2C_SLAVE
+#define CONFIG_SYS_I2C_SLAVE 0xFE
#endif
#define ONE_BILLION 1000000000
@@ -119,7 +119,7 @@ struct bank_param {
typedef struct bank_param BANKPARMS;
-#ifdef CFG_SIMULATE_SPD_EEPROM
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
extern const unsigned char cfg_simulate_spd_eeprom[128];
#endif
@@ -174,7 +174,7 @@ long int spd_sdram(void) {
* Make sure I2C controller is initialized
* before continuing.
*/
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/*
* Read the SPD information using I2C interface. Check to see if the
@@ -265,7 +265,7 @@ long int spd_sdram(void) {
/*
* If ecc is enabled, initialize the parity bits.
*/
- ecc_init(CFG_SDRAM_BASE, total_size);
+ ecc_init(CONFIG_SYS_SDRAM_BASE, total_size);
#endif
return total_size;
@@ -275,14 +275,14 @@ static unsigned char spd_read(uchar chip, uint addr)
{
unsigned char data[2];
-#ifdef CFG_SIMULATE_SPD_EEPROM
- if (chip == CFG_SIMULATE_SPD_EEPROM) {
+#ifdef CONFIG_SYS_SIMULATE_SPD_EEPROM
+ if (chip == CONFIG_SYS_SIMULATE_SPD_EEPROM) {
/*
* Onboard spd eeprom requested -> simulate values
*/
return cfg_simulate_spd_eeprom[addr];
}
-#endif /* CFG_SIMULATE_SPD_EEPROM */
+#endif /* CONFIG_SYS_SIMULATE_SPD_EEPROM */
if (i2c_probe(chip) == 0) {
if (i2c_read(chip, addr, 1, data, 1) == 0) {
@@ -1120,7 +1120,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated,
/*
* reset the bank_base address
*/
- bank_base_addr = CFG_SDRAM_BASE;
+ bank_base_addr = CONFIG_SYS_SDRAM_BASE;
for (dimm_num = 0; dimm_num < num_dimm_banks; dimm_num++) {
if (dimm_populated[dimm_num] == TRUE) {
diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c
index 995d5fe..4544b78 100644
--- a/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/cpu/ppc4xx/44x_spd_ddr2.c
@@ -402,8 +402,8 @@ phys_size_t initdram(int board_type)
*/
/* switch to correct I2C bus */
- I2C_SET_BUS(CFG_SPD_BUS_NUM);
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/*------------------------------------------------------------------
* Clear out the serial presence detect buffers.
@@ -2978,62 +2978,62 @@ phys_size_t initdram(int board_type)
/* Set Memory Bank Configuration Registers */
- mtsdram(SDRAM_MB0CF, CFG_SDRAM0_MB0CF);
- mtsdram(SDRAM_MB1CF, CFG_SDRAM0_MB1CF);
- mtsdram(SDRAM_MB2CF, CFG_SDRAM0_MB2CF);
- mtsdram(SDRAM_MB3CF, CFG_SDRAM0_MB3CF);
+ mtsdram(SDRAM_MB0CF, CONFIG_SYS_SDRAM0_MB0CF);
+ mtsdram(SDRAM_MB1CF, CONFIG_SYS_SDRAM0_MB1CF);
+ mtsdram(SDRAM_MB2CF, CONFIG_SYS_SDRAM0_MB2CF);
+ mtsdram(SDRAM_MB3CF, CONFIG_SYS_SDRAM0_MB3CF);
/* Set Memory Clock Timing Register */
- mtsdram(SDRAM_CLKTR, CFG_SDRAM0_CLKTR);
+ mtsdram(SDRAM_CLKTR, CONFIG_SYS_SDRAM0_CLKTR);
/* Set Refresh Time Register */
- mtsdram(SDRAM_RTR, CFG_SDRAM0_RTR);
+ mtsdram(SDRAM_RTR, CONFIG_SYS_SDRAM0_RTR);
/* Set SDRAM Timing Registers */
- mtsdram(SDRAM_SDTR1, CFG_SDRAM0_SDTR1);
- mtsdram(SDRAM_SDTR2, CFG_SDRAM0_SDTR2);
- mtsdram(SDRAM_SDTR3, CFG_SDRAM0_SDTR3);
+ mtsdram(SDRAM_SDTR1, CONFIG_SYS_SDRAM0_SDTR1);
+ mtsdram(SDRAM_SDTR2, CONFIG_SYS_SDRAM0_SDTR2);
+ mtsdram(SDRAM_SDTR3, CONFIG_SYS_SDRAM0_SDTR3);
/* Set Mode and Extended Mode Registers */
- mtsdram(SDRAM_MMODE, CFG_SDRAM0_MMODE);
- mtsdram(SDRAM_MEMODE, CFG_SDRAM0_MEMODE);
+ mtsdram(SDRAM_MMODE, CONFIG_SYS_SDRAM0_MMODE);
+ mtsdram(SDRAM_MEMODE, CONFIG_SYS_SDRAM0_MEMODE);
/* Set Memory Controller Options 1 Register */
- mtsdram(SDRAM_MCOPT1, CFG_SDRAM0_MCOPT1);
+ mtsdram(SDRAM_MCOPT1, CONFIG_SYS_SDRAM0_MCOPT1);
/* Set Manual Initialization Control Registers */
- mtsdram(SDRAM_INITPLR0, CFG_SDRAM0_INITPLR0);
- mtsdram(SDRAM_INITPLR1, CFG_SDRAM0_INITPLR1);
- mtsdram(SDRAM_INITPLR2, CFG_SDRAM0_INITPLR2);
- mtsdram(SDRAM_INITPLR3, CFG_SDRAM0_INITPLR3);
- mtsdram(SDRAM_INITPLR4, CFG_SDRAM0_INITPLR4);
- mtsdram(SDRAM_INITPLR5, CFG_SDRAM0_INITPLR5);
- mtsdram(SDRAM_INITPLR6, CFG_SDRAM0_INITPLR6);
- mtsdram(SDRAM_INITPLR7, CFG_SDRAM0_INITPLR7);
- mtsdram(SDRAM_INITPLR8, CFG_SDRAM0_INITPLR8);
- mtsdram(SDRAM_INITPLR9, CFG_SDRAM0_INITPLR9);
- mtsdram(SDRAM_INITPLR10, CFG_SDRAM0_INITPLR10);
- mtsdram(SDRAM_INITPLR11, CFG_SDRAM0_INITPLR11);
- mtsdram(SDRAM_INITPLR12, CFG_SDRAM0_INITPLR12);
- mtsdram(SDRAM_INITPLR13, CFG_SDRAM0_INITPLR13);
- mtsdram(SDRAM_INITPLR14, CFG_SDRAM0_INITPLR14);
- mtsdram(SDRAM_INITPLR15, CFG_SDRAM0_INITPLR15);
+ mtsdram(SDRAM_INITPLR0, CONFIG_SYS_SDRAM0_INITPLR0);
+ mtsdram(SDRAM_INITPLR1, CONFIG_SYS_SDRAM0_INITPLR1);
+ mtsdram(SDRAM_INITPLR2, CONFIG_SYS_SDRAM0_INITPLR2);
+ mtsdram(SDRAM_INITPLR3, CONFIG_SYS_SDRAM0_INITPLR3);
+ mtsdram(SDRAM_INITPLR4, CONFIG_SYS_SDRAM0_INITPLR4);
+ mtsdram(SDRAM_INITPLR5, CONFIG_SYS_SDRAM0_INITPLR5);
+ mtsdram(SDRAM_INITPLR6, CONFIG_SYS_SDRAM0_INITPLR6);
+ mtsdram(SDRAM_INITPLR7, CONFIG_SYS_SDRAM0_INITPLR7);
+ mtsdram(SDRAM_INITPLR8, CONFIG_SYS_SDRAM0_INITPLR8);
+ mtsdram(SDRAM_INITPLR9, CONFIG_SYS_SDRAM0_INITPLR9);
+ mtsdram(SDRAM_INITPLR10, CONFIG_SYS_SDRAM0_INITPLR10);
+ mtsdram(SDRAM_INITPLR11, CONFIG_SYS_SDRAM0_INITPLR11);
+ mtsdram(SDRAM_INITPLR12, CONFIG_SYS_SDRAM0_INITPLR12);
+ mtsdram(SDRAM_INITPLR13, CONFIG_SYS_SDRAM0_INITPLR13);
+ mtsdram(SDRAM_INITPLR14, CONFIG_SYS_SDRAM0_INITPLR14);
+ mtsdram(SDRAM_INITPLR15, CONFIG_SYS_SDRAM0_INITPLR15);
/* Set On-Die Termination Registers */
- mtsdram(SDRAM_CODT, CFG_SDRAM0_CODT);
- mtsdram(SDRAM_MODT0, CFG_SDRAM0_MODT0);
- mtsdram(SDRAM_MODT1, CFG_SDRAM0_MODT1);
+ mtsdram(SDRAM_CODT, CONFIG_SYS_SDRAM0_CODT);
+ mtsdram(SDRAM_MODT0, CONFIG_SYS_SDRAM0_MODT0);
+ mtsdram(SDRAM_MODT1, CONFIG_SYS_SDRAM0_MODT1);
/* Set Write Timing Register */
- mtsdram(SDRAM_WRDTR, CFG_SDRAM0_WRDTR);
+ mtsdram(SDRAM_WRDTR, CONFIG_SYS_SDRAM0_WRDTR);
/*
* Start Initialization by SDRAM0_MCOPT2[SREN] = 0 and
@@ -3054,12 +3054,12 @@ phys_size_t initdram(int board_type)
/* Set Delay Control Registers */
- mtsdram(SDRAM_DLCR, CFG_SDRAM0_DLCR);
+ mtsdram(SDRAM_DLCR, CONFIG_SYS_SDRAM0_DLCR);
#if !defined(CONFIG_PPC4xx_DDR_AUTOCALIBRATION)
- mtsdram(SDRAM_RDCC, CFG_SDRAM0_RDCC);
- mtsdram(SDRAM_RQDC, CFG_SDRAM0_RQDC);
- mtsdram(SDRAM_RFDC, CFG_SDRAM0_RFDC);
+ mtsdram(SDRAM_RDCC, CONFIG_SYS_SDRAM0_RDCC);
+ mtsdram(SDRAM_RQDC, CONFIG_SYS_SDRAM0_RQDC);
+ mtsdram(SDRAM_RFDC, CONFIG_SYS_SDRAM0_RFDC);
#endif /* !CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
/*
@@ -3079,7 +3079,7 @@ phys_size_t initdram(int board_type)
#endif /* CONFIG_PPC4xx_DDR_AUTOCALIBRATION */
#if defined(CONFIG_DDR_ECC)
- ecc_init(CFG_SDRAM_BASE, CFG_MBYTES_SDRAM << 20);
+ ecc_init(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MBYTES_SDRAM << 20);
#endif /* defined(CONFIG_DDR_ECC) */
ppc4xx_ibm_ddr2_register_dump();
@@ -3095,7 +3095,7 @@ phys_size_t initdram(int board_type)
#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
- return (CFG_MBYTES_SDRAM << 20);
+ return (CONFIG_SYS_MBYTES_SDRAM << 20);
}
#endif /* CONFIG_SPD_EEPROM */
diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 6d4d043..d7b16da 100644
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -225,7 +225,7 @@
* Some boards do not have a PHY for each ethernet port. These ports
* are known as Fixed PHY (or PHY-less) ports. For such ports, set
* the appropriate CONFIG_PHY_ADDR equal to CONFIG_FIXED_PHY and
- * then define CFG_FIXED_PHY_PORTS to define what the speed and
+ * then define CONFIG_SYS_FIXED_PHY_PORTS to define what the speed and
* duplex should be for these ports in the board configuration
* file.
*
@@ -237,20 +237,20 @@
* #define CONFIG_PHY2_ADDR CONFIG_FIXED_PHY
* #define CONFIG_PHY3_ADDR 3
*
- * #define CFG_FIXED_PHY_PORT(devnum,speed,duplex) \
+ * #define CONFIG_SYS_FIXED_PHY_PORT(devnum,speed,duplex) \
* {devnum, speed, duplex},
*
- * #define CFG_FIXED_PHY_PORTS \
- * CFG_FIXED_PHY_PORT(0,1000,FULL) \
- * CFG_FIXED_PHY_PORT(2,100,HALF)
+ * #define CONFIG_SYS_FIXED_PHY_PORTS \
+ * CONFIG_SYS_FIXED_PHY_PORT(0,1000,FULL) \
+ * CONFIG_SYS_FIXED_PHY_PORT(2,100,HALF)
*/
#ifndef CONFIG_FIXED_PHY
#define CONFIG_FIXED_PHY 0xFFFFFFFF /* Fixed PHY (PHY-less) */
#endif
-#ifndef CFG_FIXED_PHY_PORTS
-#define CFG_FIXED_PHY_PORTS /* default is an empty array */
+#ifndef CONFIG_SYS_FIXED_PHY_PORTS
+#define CONFIG_SYS_FIXED_PHY_PORTS /* default is an empty array */
#endif
struct fixed_phy_port {
@@ -260,7 +260,7 @@ struct fixed_phy_port {
};
static const struct fixed_phy_port fixed_phy_port[] = {
- CFG_FIXED_PHY_PORTS /* defined in board configuration file */
+ CONFIG_SYS_FIXED_PHY_PORTS /* defined in board configuration file */
};
/*-----------------------------------------------------------------------------+
@@ -1337,8 +1337,8 @@ get_speed:
#ifdef CONFIG_4xx_DCACHE
flush_dcache_range(bd_cached, bd_cached + MAL_ALLOC_SIZE);
if (!last_used_ea)
-#if defined(CFG_MEM_TOP_HIDE)
- bd_uncached = bis->bi_memsize + CFG_MEM_TOP_HIDE;
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+ bd_uncached = bis->bi_memsize + CONFIG_SYS_MEM_TOP_HIDE;
#else
bd_uncached = bis->bi_memsize;
#endif
diff --git a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
index 47ab39b..1e3e20d 100644
--- a/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
+++ b/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c
@@ -53,11 +53,11 @@
#define MAXBXCF 4
#define SDRAM_RXBAS_SHIFT_1M 20
-#if defined(CFG_DECREMENT_PATTERNS)
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
#define NUMMEMTESTS 24
#else
#define NUMMEMTESTS 8
-#endif /* CFG_DECREMENT_PATTERNS */
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
#define NUMLOOPS 1 /* configure as you deem approporiate */
#define NUMMEMWORDS 16
@@ -254,7 +254,7 @@ static int short_mem_test(u32 *base_address)
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55,
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55},
-#if defined(CFG_DECREMENT_PATTERNS)
+#if defined(CONFIG_SYS_DECREMENT_PATTERNS)
/* 8 */ {0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
0xffffffff, 0xffffffff, 0xffffffff, 0xffffffff,
@@ -319,7 +319,7 @@ static int short_mem_test(u32 *base_address)
0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
0xfff0fff0, 0xfff0fff0, 0xfff0fff0, 0xfff0fff0,
0xfff0fff0, 0xfff0fffe, 0xfff0fff0, 0xfff0fff0},
-#endif /* CFG_DECREMENT_PATTERNS */
+#endif /* CONFIG_SYS_DECREMENT_PATTERNS */
};
mfsdram(SDRAM_MCOPT1, ecc_mode);
diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c
index c28c7ac..eca92e8 100644
--- a/cpu/ppc4xx/4xx_pci.c
+++ b/cpu/ppc4xx/4xx_pci.c
@@ -108,12 +108,12 @@ void pci_405gp_init(struct pci_controller *hose)
bd_t *bd = gd->bd;
unsigned short temp_short;
- unsigned long ptmpcila[2] = {CFG_PCI_PTM1PCI, CFG_PCI_PTM2PCI};
+ unsigned long ptmpcila[2] = {CONFIG_SYS_PCI_PTM1PCI, CONFIG_SYS_PCI_PTM2PCI};
#if defined(CONFIG_CPCI405) || defined(CONFIG_PMC405)
char *ptmla_str, *ptmms_str;
#endif
- unsigned long ptmla[2] = {CFG_PCI_PTM1LA, CFG_PCI_PTM2LA};
- unsigned long ptmms[2] = {CFG_PCI_PTM1MS, CFG_PCI_PTM2MS};
+ unsigned long ptmla[2] = {CONFIG_SYS_PCI_PTM1LA, CONFIG_SYS_PCI_PTM2LA};
+ unsigned long ptmms[2] = {CONFIG_SYS_PCI_PTM1MS, CONFIG_SYS_PCI_PTM2MS};
#if defined(CONFIG_PIP405) || defined (CONFIG_MIP405)
unsigned long pmmla[3] = {0x80000000, 0xA0000000, 0};
unsigned long pmmma[3] = {0xE0000001, 0xE0000001, 0};
@@ -268,22 +268,22 @@ void pci_405gp_init(struct pci_controller *hose)
/*
* Insert Subsystem Vendor and Device ID
*/
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_VENDOR_ID, CONFIG_SYS_PCI_SUBSYS_VENDORID);
#ifdef CONFIG_CPCI405
if (mfdcr(strap) & PSR_PCI_ARBIT_EN)
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID2);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID2);
#else
- pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_DEVICEID);
+ pci_write_config_word(PCIDEVID_405GP, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_DEVICEID);
#endif
/*
* Insert Class-code
*/
-#ifdef CFG_PCI_CLASSCODE
- pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CFG_PCI_CLASSCODE);
-#endif /* CFG_PCI_CLASSCODE */
+#ifdef CONFIG_SYS_PCI_CLASSCODE
+ pci_write_config_word(PCIDEVID_405GP, PCI_CLASS_SUB_CODE, CONFIG_SYS_PCI_CLASSCODE);
+#endif /* CONFIG_SYS_PCI_CLASSCODE */
/*--------------------------------------------------------------------------+
* If PCI speed = 66Mhz, set 66Mhz capable bit.
@@ -405,8 +405,8 @@ void pci_405gp_setup_vga(struct pci_controller *hose, pci_dev_t dev,
*/
static struct pci_config_table pci_405gp_config_table[] = {
/*if VendID is 0 it terminates the table search (ie Walnut)*/
-#ifdef CFG_PCI_SUBSYS_VENDORID
- {CFG_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
+#ifdef CONFIG_SYS_PCI_SUBSYS_VENDORID
+ {CONFIG_SYS_PCI_SUBSYS_VENDORID, PCI_ANY_ID, PCI_CLASS_BRIDGE_HOST,
PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, pci_405gp_setup_bridge},
#endif
{PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_DISPLAY_VGA,
@@ -488,10 +488,10 @@ int pci_440_init (struct pci_controller *hose)
/* PCI memory space */
pci_set_region(hose->regions + reg_num++,
- CFG_PCI_TARGBASE,
- CFG_PCI_MEMBASE,
-#ifdef CFG_PCI_MEMSIZE
- CFG_PCI_MEMSIZE,
+ CONFIG_SYS_PCI_TARGBASE,
+ CONFIG_SYS_PCI_MEMBASE,
+#ifdef CONFIG_SYS_PCI_MEMSIZE
+ CONFIG_SYS_PCI_MEMSIZE,
#else
0x10000000,
#endif
@@ -523,11 +523,11 @@ int pci_440_init (struct pci_controller *hose)
/*--------------------------------------------------------------------------+
* PCI target init
*--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_TARGET_INIT)
+#if defined(CONFIG_SYS_PCI_TARGET_INIT)
pci_target_init(hose); /* Let board setup pci target */
#else
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_ID );
+ out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
+ out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID );
out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */
#endif
@@ -542,9 +542,9 @@ int pci_440_init (struct pci_controller *hose)
/*--------------------------------------------------------------------------+
* PCI master init: default is one 256MB region for PCI memory:
- * 0x3_00000000 - 0x3_0FFFFFFF ==> CFG_PCI_MEMBASE
+ * 0x3_00000000 - 0x3_0FFFFFFF ==> CONFIG_SYS_PCI_MEMBASE
*--------------------------------------------------------------------------*/
-#if defined(CFG_PCI_MASTER_INIT)
+#if defined(CONFIG_SYS_PCI_MASTER_INIT)
pci_master_init(hose); /* Let board setup pci master */
#else
out32r( PCIX0_POM0SA, 0 ); /* disable */
@@ -558,7 +558,7 @@ int pci_440_init (struct pci_controller *hose)
out32r( PCIX0_POM0LAL, 0x00000000 );
out32r( PCIX0_POM0LAH, 0x00000003 );
#endif
- out32r( PCIX0_POM0PCIAL, CFG_PCI_MEMBASE );
+ out32r( PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE );
out32r( PCIX0_POM0PCIAH, 0x00000000 );
out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */
out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 );
diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c
index 0aadc06..fd40d8a 100644
--- a/cpu/ppc4xx/4xx_pcie.c
+++ b/cpu/ppc4xx/4xx_pcie.c
@@ -49,12 +49,12 @@ enum {
static int validate_endpoint(struct pci_controller *hose)
{
- if (hose->cfg_data == (u8 *)CFG_PCIE0_CFGBASE)
+ if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE)
return (is_end_point(0));
- else if (hose->cfg_data == (u8 *)CFG_PCIE1_CFGBASE)
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE1_CFGBASE)
return (is_end_point(1));
-#if CFG_PCIE_NR_PORTS > 2
- else if (hose->cfg_data == (u8 *)CFG_PCIE2_CFGBASE)
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ else if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE2_CFGBASE)
return (is_end_point(2));
#endif
@@ -67,13 +67,13 @@ static u8* pcie_get_base(struct pci_controller *hose, unsigned int devfn)
/* use local configuration space for the first bus */
if (PCI_BUS(devfn) == 0) {
- if (hose->cfg_data == (u8*)CFG_PCIE0_CFGBASE)
- base = (u8*)CFG_PCIE0_XCFGBASE;
- if (hose->cfg_data == (u8*)CFG_PCIE1_CFGBASE)
- base = (u8*)CFG_PCIE1_XCFGBASE;
-#if CFG_PCIE_NR_PORTS > 2
- if (hose->cfg_data == (u8*)CFG_PCIE2_CFGBASE)
- base = (u8*)CFG_PCIE2_XCFGBASE;
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE0_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE0_XCFGBASE;
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE1_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE1_XCFGBASE;
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
+ if (hose->cfg_data == (u8*)CONFIG_SYS_PCIE2_CFGBASE)
+ base = (u8*)CONFIG_SYS_PCIE2_XCFGBASE;
#endif
}
@@ -86,7 +86,7 @@ static void pcie_dmer_disable(void)
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) | GPL_DMER_MASK_DISA);
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE),
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) | GPL_DMER_MASK_DISA);
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
mtdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE),
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) | GPL_DMER_MASK_DISA);
#endif
@@ -98,7 +98,7 @@ static void pcie_dmer_enable(void)
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE0_BASE)) & ~GPL_DMER_MASK_DISA);
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE1_BASE),
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE1_BASE)) & ~GPL_DMER_MASK_DISA);
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
mtdcr (DCRN_PEGPL_CFG (DCRN_PCIE2_BASE),
mfdcr (DCRN_PEGPL_CFG(DCRN_PCIE2_BASE)) & ~GPL_DMER_MASK_DISA);
#endif
@@ -286,7 +286,7 @@ static void ppc4xx_setup_utl(u32 port) {
mtdcr(DCRN_PEGPL_SPECIAL(PCIE2), 0x68782800);
break;
}
- utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
/*
* Set buffer allocations and then assert VRB and TXE.
@@ -412,21 +412,21 @@ static void ppc4xx_setup_utl(u32 port)
*/
switch (port) {
case 0:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE0), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE));
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* BAM 11100000=4KB */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
break;
case 1:
- mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CFG_PCIE0_UTLBASE));
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CFG_PCIE0_UTLBASE)
+ mtdcr(DCRN_PEGPL_REGBAH(PCIE1), U64_TO_U32_HIGH(CONFIG_SYS_PCIE0_UTLBASE));
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), U64_TO_U32_LOW(CONFIG_SYS_PCIE0_UTLBASE)
+ 0x1000);
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* BAM 11100000=4KB */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
break;
}
- utl_base = (unsigned int *)(CFG_PCIE_BASE + 0x1000 * port);
+ utl_base = (unsigned int *)(CONFIG_SYS_PCIE_BASE + 0x1000 * port);
/*
* Set buffer allocations and then assert VRB and TXE.
@@ -512,20 +512,20 @@ static void ppc4xx_setup_utl(u32 port)
switch (port) {
case 0:
mtdcr(DCRN_PEGPL_REGBAH(PCIE0), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CFG_PCIE0_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE0), CONFIG_SYS_PCIE0_UTLBASE);
mtdcr(DCRN_PEGPL_REGMSK(PCIE0), 0x00007001); /* 4k region, valid */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE0), 0);
break;
case 1:
mtdcr(DCRN_PEGPL_REGBAH(PCIE1), 0x00000000);
- mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CFG_PCIE1_UTLBASE);
+ mtdcr(DCRN_PEGPL_REGBAL(PCIE1), CONFIG_SYS_PCIE1_UTLBASE);
mtdcr(DCRN_PEGPL_REGMSK(PCIE1), 0x00007001); /* 4k region, valid */
mtdcr(DCRN_PEGPL_SPECIAL(PCIE1), 0);
break;
}
- utl_base = (port==0) ? CFG_PCIE0_UTLBASE : CFG_PCIE1_UTLBASE;
+ utl_base = (port==0) ? CONFIG_SYS_PCIE0_UTLBASE : CONFIG_SYS_PCIE1_UTLBASE;
/*
* Set buffer allocations and then assert VRB and TXE.
@@ -761,9 +761,9 @@ static inline u64 ppc4xx_get_cfgaddr(int port)
{
#if defined(CONFIG_405EX)
if (port == 0)
- return (u64)CFG_PCIE0_CFGBASE;
+ return (u64)CONFIG_SYS_PCIE0_CFGBASE;
else
- return (u64)CFG_PCIE1_CFGBASE;
+ return (u64)CONFIG_SYS_PCIE1_CFGBASE;
#endif
#if defined(CONFIG_440SPE)
if (ppc440spe_revB()) {
@@ -895,7 +895,7 @@ int ppc4xx_init_pcie_port(int port, int rootport)
mtdcr(DCRN_PEGPL_CFGBAL(PCIE1), low);
mtdcr(DCRN_PEGPL_CFGMSK(PCIE1), 0xe0000001); /* 512MB region, valid */
break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
case 2:
mtdcr(DCRN_PEGPL_CFGBAH(PCIE2), high);
mtdcr(DCRN_PEGPL_CFGBAL(PCIE2), low);
@@ -947,20 +947,20 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
switch (port) {
case 0:
- mbase = (u32 *)CFG_PCIE0_XCFGBASE;
- rmbase = (u32 *)CFG_PCIE0_CFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE0_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
break;
case 1:
- mbase = (u32 *)CFG_PCIE1_XCFGBASE;
- rmbase = (u32 *)CFG_PCIE1_CFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE1_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
case 2:
- mbase = (u32 *)CFG_PCIE2_XCFGBASE;
- rmbase = (u32 *)CFG_PCIE2_CFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ rmbase = (u32 *)CONFIG_SYS_PCIE2_CFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
break;
#endif
}
@@ -979,19 +979,19 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
* subregions and to enable the outbound translation.
*/
out_le32(mbase + PECFG_POM0LAH, 0x00000000);
- out_le32(mbase + PECFG_POM0LAL, CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ out_le32(mbase + PECFG_POM0LAL, CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
debug("PECFG_POM0LA=%08x.%08x\n", in_le32(mbase + PECFG_POM0LAH),
in_le32(mbase + PECFG_POM0LAL));
switch (port) {
case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
debug("0:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE0)),
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE0)),
@@ -999,26 +999,26 @@ void ppc4xx_setup_pcie_rootpoint(struct pci_controller *hose, int port)
mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE0)));
break;
case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
debug("1:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE1)),
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE1)),
mfdcr(DCRN_PEGPL_OMR1MSKH(PCIE1)),
mfdcr(DCRN_PEGPL_OMR1MSKL(PCIE1)));
break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
debug("2:PEGPL_OMR1BA=%08x.%08x MSK=%08x.%08x\n",
mfdcr(DCRN_PEGPL_OMR1BAH(PCIE2)),
mfdcr(DCRN_PEGPL_OMR1BAL(PCIE2)),
@@ -1072,17 +1072,17 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
switch (port) {
case 0:
- mbase = (u32 *)CFG_PCIE0_XCFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE0_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE0_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE0_CFGBASE;
break;
case 1:
- mbase = (u32 *)CFG_PCIE1_XCFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE1_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE1_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE1_CFGBASE;
break;
-#if defined(CFG_PCIE2_CFGBASE)
+#if defined(CONFIG_SYS_PCIE2_CFGBASE)
case 2:
- mbase = (u32 *)CFG_PCIE2_XCFGBASE;
- hose->cfg_data = (u8 *)CFG_PCIE2_CFGBASE;
+ mbase = (u32 *)CONFIG_SYS_PCIE2_XCFGBASE;
+ hose->cfg_data = (u8 *)CONFIG_SYS_PCIE2_CFGBASE;
break;
#endif
}
@@ -1098,29 +1098,29 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
switch (port) {
case 0:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE0), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE0), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE0), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE0),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
break;
case 1:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE1), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE1), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE1), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE1),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
break;
-#if CFG_PCIE_NR_PORTS > 2
+#if CONFIG_SYS_PCIE_NR_PORTS > 2
case 2:
- mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CFG_PCIE_ADDR_HIGH);
- mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CFG_PCIE_MEMBASE +
- port * CFG_PCIE_MEMSIZE);
+ mtdcr(DCRN_PEGPL_OMR1BAH(PCIE2), CONFIG_SYS_PCIE_ADDR_HIGH);
+ mtdcr(DCRN_PEGPL_OMR1BAL(PCIE2), CONFIG_SYS_PCIE_MEMBASE +
+ port * CONFIG_SYS_PCIE_MEMSIZE);
mtdcr(DCRN_PEGPL_OMR1MSKH(PCIE2), 0x7fffffff);
mtdcr(DCRN_PEGPL_OMR1MSKL(PCIE2),
- ~(CFG_PCIE_MEMSIZE - 1) | 3);
+ ~(CONFIG_SYS_PCIE_MEMSIZE - 1) | 3);
break;
#endif
}
@@ -1141,8 +1141,8 @@ int ppc4xx_setup_pcie_endpoint(struct pci_controller *hose, int port)
out_le32(mbase + PECFG_BAR2HMPA, 0);
out_le32(mbase + PECFG_BAR2LMPA, 0);
- out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CFG_PCIE_INBOUND_BASE));
- out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CFG_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIM0LAL, U64_TO_U32_LOW(CONFIG_SYS_PCIE_INBOUND_BASE));
+ out_le32(mbase + PECFG_PIM0LAH, U64_TO_U32_HIGH(CONFIG_SYS_PCIE_INBOUND_BASE));
out_le32(mbase + PECFG_PIMEN, 0x1);
/* Enable I/O, Mem, and Busmaster cycles */
diff --git a/cpu/ppc4xx/4xx_uart.c b/cpu/ppc4xx/4xx_uart.c
index 766e586..c106ac2 100644
--- a/cpu/ppc4xx/4xx_uart.c
+++ b/cpu/ppc4xx/4xx_uart.c
@@ -66,20 +66,20 @@ DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
-#define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000400)
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000400)
#else
-#define UART0_BASE (CFG_PERIPHERAL_BASE + 0x00000200)
-#define UART1_BASE (CFG_PERIPHERAL_BASE + 0x00000300)
+#define UART0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000200)
+#define UART1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000300)
#endif
#if defined(CONFIG_440SP) || defined(CONFIG_440SPE)
-#define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
#endif
#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
-#define UART2_BASE (CFG_PERIPHERAL_BASE + 0x00000500)
-#define UART3_BASE (CFG_PERIPHERAL_BASE + 0x00000600)
+#define UART2_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000500)
+#define UART3_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000600)
#endif
#if defined(CONFIG_440GP)
@@ -147,7 +147,7 @@ DECLARE_GLOBAL_DATA_PTR;
#define ACTING_UART1_BASE UART1_BASE
#endif
-#if defined(CONFIG_405EP) && defined(CFG_EXT_SERIAL_CLOCK)
+#if defined(CONFIG_405EP) && defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
#error "External serial clock not supported on AMCC PPC405EP!"
#endif
@@ -199,8 +199,8 @@ static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
/* Correct UART frequency in bd-info struct now that
* the UART divisor is available
*/
-#ifdef CFG_EXT_SERIAL_CLOCK
- gd->uart_clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ gd->uart_clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
#else
gd->uart_clk = sys_info.freqUART / udiv;
#endif
@@ -218,7 +218,7 @@ static void serial_init_common(u32 base, u32 udiv, u16 bdiv)
}
#if (defined(CONFIG_440) || defined(CONFIG_405EX)) && \
- !defined(CFG_EXT_SERIAL_CLOCK)
+ !defined(CONFIG_SYS_EXT_SERIAL_CLOCK)
static void serial_divs (int baudrate, unsigned long *pudiv,
unsigned short *pbdiv)
{
@@ -315,7 +315,7 @@ static void serial_divs (int baudrate, unsigned long *pudiv,
mtcpr(cprperd0, reg);
*pbdiv = div / udiv;
}
-#endif /* defined(CONFIG_440) && !defined(CFG_EXT_SERIAL_CLK) */
+#endif /* defined(CONFIG_440) && !defined(CONFIG_SYS_EXT_SERIAL_CLK) */
/*
* Minimal serial functions needed to use one of the SMC ports
@@ -328,18 +328,18 @@ int serial_init_dev(unsigned long base)
unsigned long reg;
unsigned long udiv;
unsigned short bdiv;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
unsigned long tmp;
#endif
MFREG(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
tmp = gd->baudrate * 16;
- bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
#else
/* For 440, the cpu clock is on divider chain A, UART on divider
* chain B ... so cpu clock is irrelevant. Get the "optimized"
@@ -384,11 +384,11 @@ int serial_init_dev (unsigned long base)
clk = tmp = 0;
mfsdr(UART0_SDR, reg);
reg &= ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
reg |= CR0_EXTCLK_ENA;
udiv = 1;
tmp = gd->baudrate * 16;
- bdiv = (CFG_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
+ bdiv = (CONFIG_SYS_EXT_SERIAL_CLOCK + tmp / 2) / tmp;
#else
serial_divs(gd->baudrate, &udiv, &bdiv);
#endif
@@ -411,7 +411,7 @@ int serial_init_dev (unsigned long base)
#ifdef CONFIG_405EP
reg = mfdcr(cpc0_ucr) & ~(UCR0_MASK | UCR1_MASK);
clk = gd->cpu_clk;
- tmp = CFG_BASE_BAUD * 16;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
udiv = (clk + tmp / 2) / tmp;
if (udiv > UDIV_MAX) /* max. n bits for udiv */
udiv = UDIV_MAX;
@@ -420,16 +420,16 @@ int serial_init_dev (unsigned long base)
mtdcr (cpc0_ucr, reg);
#else /* CONFIG_405EP */
reg = mfdcr(cntrl0) & ~CR0_MASK;
-#ifdef CFG_EXT_SERIAL_CLOCK
- clk = CFG_EXT_SERIAL_CLOCK;
+#ifdef CONFIG_SYS_EXT_SERIAL_CLOCK
+ clk = CONFIG_SYS_EXT_SERIAL_CLOCK;
udiv = 1;
reg |= CR0_EXTCLK_ENA;
#else
clk = gd->cpu_clk;
-#ifdef CFG_405_UART_ERRATA_59
+#ifdef CONFIG_SYS_405_UART_ERRATA_59
udiv = 31; /* Errata 59: stuck at 31 */
#else
- tmp = CFG_BASE_BAUD * 16;
+ tmp = CONFIG_SYS_BASE_BAUD * 16;
udiv = (clk + tmp / 2) / tmp;
if (udiv > UDIV_MAX) /* max. n bits for udiv */
udiv = UDIV_MAX;
diff --git a/cpu/ppc4xx/cache.S b/cpu/ppc4xx/cache.S
index ceb3ec0..269716f 100644
--- a/cpu/ppc4xx/cache.S
+++ b/cpu/ppc4xx/cache.S
@@ -143,8 +143,8 @@ _GLOBAL(flush_dcache)
_GLOBAL(invalidate_dcache)
addi r6,0,0x0000 /* clear GPR 6 */
/* Do loop for # of dcache congruence classes. */
- lis r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
- ori r7,r7,(CFG_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
+ lis r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@ha /* TBS for large sized cache */
+ ori r7,r7,(CONFIG_SYS_DCACHE_SIZE / L1_CACHE_BYTES / 2)@l
/* NOTE: dccci invalidates both */
mtctr r7 /* ways in the D cache */
..dcloop:
diff --git a/cpu/ppc4xx/commproc.c b/cpu/ppc4xx/commproc.c
index 8b2954c..a1696d3 100644
--- a/cpu/ppc4xx/commproc.c
+++ b/cpu/ppc4xx/commproc.c
@@ -30,10 +30,10 @@
#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-#if defined(CFG_POST_WORD_ADDR)
-# define _POST_ADDR ((CFG_OCM_DATA_ADDR) + (CFG_POST_WORD_ADDR))
-#elif defined(CFG_POST_ALT_WORD_ADDR)
-# define _POST_ADDR (CFG_POST_ALT_WORD_ADDR)
+#if defined(CONFIG_SYS_POST_WORD_ADDR)
+# define _POST_ADDR ((CONFIG_SYS_OCM_DATA_ADDR) + (CONFIG_SYS_POST_WORD_ADDR))
+#elif defined(CONFIG_SYS_POST_ALT_WORD_ADDR)
+# define _POST_ADDR (CONFIG_SYS_POST_ALT_WORD_ADDR)
#endif
void post_word_store (ulong a)
@@ -57,7 +57,7 @@ ulong post_word_load (void)
void bootcount_store (ulong a)
{
volatile ulong *save_addr =
- (volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
save_addr[0] = a;
save_addr[1] = BOOTCOUNT_MAGIC;
@@ -66,7 +66,7 @@ void bootcount_store (ulong a)
ulong bootcount_load (void)
{
volatile ulong *save_addr =
- (volatile ulong *)(CFG_OCM_DATA_ADDR + CFG_BOOTCOUNT_ADDR);
+ (volatile ulong *)(CONFIG_SYS_OCM_DATA_ADDR + CONFIG_SYS_BOOTCOUNT_ADDR);
if (save_addr[1] != BOOTCOUNT_MAGIC)
return 0;
diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c
index bc9335a..66a7737 100644
--- a/cpu/ppc4xx/cpu.c
+++ b/cpu/ppc4xx/cpu.c
@@ -629,14 +629,14 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
#if defined(CONFIG_BOARD_RESET)
board_reset();
#else
-#if defined(CFG_4xx_RESET_TYPE)
- mtspr(dbcr0, CFG_4xx_RESET_TYPE << 28);
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
+ mtspr(dbcr0, CONFIG_SYS_4xx_RESET_TYPE << 28);
#else
/*
* Initiate system reset in debug control register DBCR
*/
mtspr(dbcr0, 0x30000000);
-#endif /* defined(CFG_4xx_RESET_TYPE) */
+#endif /* defined(CONFIG_SYS_4xx_RESET_TYPE) */
#endif /* defined(CONFIG_BOARD_RESET) */
return 1;
diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c
index dee9807..b5d81f2 100644
--- a/cpu/ppc4xx/cpu_init.c
+++ b/cpu/ppc4xx/cpu_init.c
@@ -32,8 +32,8 @@
DECLARE_GLOBAL_DATA_PTR;
#endif
-#ifndef CFG_PLL_RECONFIG
-#define CFG_PLL_RECONFIG 0
+#ifndef CONFIG_SYS_PLL_RECONFIG
+#define CONFIG_SYS_PLL_RECONFIG 0
#endif
void reconfigure_pll(u32 new_cpu_freq)
@@ -142,32 +142,32 @@ cpu_init_f (void)
u32 val;
#endif
- reconfigure_pll(CFG_PLL_RECONFIG);
+ reconfigure_pll(CONFIG_SYS_PLL_RECONFIG);
-#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CFG_4xx_GPIO_TABLE)
+#if (defined(CONFIG_405EP) || defined (CONFIG_405EX)) && !defined(CONFIG_SYS_4xx_GPIO_TABLE)
/*
* GPIO0 setup (select GPIO or alternate function)
*/
-#if defined(CFG_GPIO0_OR)
- out32(GPIO0_OR, CFG_GPIO0_OR); /* set initial state of output pins */
+#if defined(CONFIG_SYS_GPIO0_OR)
+ out32(GPIO0_OR, CONFIG_SYS_GPIO0_OR); /* set initial state of output pins */
#endif
-#if defined(CFG_GPIO0_ODR)
- out32(GPIO0_ODR, CFG_GPIO0_ODR); /* open-drain select */
+#if defined(CONFIG_SYS_GPIO0_ODR)
+ out32(GPIO0_ODR, CONFIG_SYS_GPIO0_ODR); /* open-drain select */
#endif
- out32(GPIO0_OSRH, CFG_GPIO0_OSRH); /* output select */
- out32(GPIO0_OSRL, CFG_GPIO0_OSRL);
- out32(GPIO0_ISR1H, CFG_GPIO0_ISR1H); /* input select */
- out32(GPIO0_ISR1L, CFG_GPIO0_ISR1L);
- out32(GPIO0_TSRH, CFG_GPIO0_TSRH); /* three-state select */
- out32(GPIO0_TSRL, CFG_GPIO0_TSRL);
-#if defined(CFG_GPIO0_ISR2H)
- out32(GPIO0_ISR2H, CFG_GPIO0_ISR2H);
- out32(GPIO0_ISR2L, CFG_GPIO0_ISR2L);
+ out32(GPIO0_OSRH, CONFIG_SYS_GPIO0_OSRH); /* output select */
+ out32(GPIO0_OSRL, CONFIG_SYS_GPIO0_OSRL);
+ out32(GPIO0_ISR1H, CONFIG_SYS_GPIO0_ISR1H); /* input select */
+ out32(GPIO0_ISR1L, CONFIG_SYS_GPIO0_ISR1L);
+ out32(GPIO0_TSRH, CONFIG_SYS_GPIO0_TSRH); /* three-state select */
+ out32(GPIO0_TSRL, CONFIG_SYS_GPIO0_TSRL);
+#if defined(CONFIG_SYS_GPIO0_ISR2H)
+ out32(GPIO0_ISR2H, CONFIG_SYS_GPIO0_ISR2H);
+ out32(GPIO0_ISR2L, CONFIG_SYS_GPIO0_ISR2L);
#endif
-#if defined (CFG_GPIO0_TCR)
- out32(GPIO0_TCR, CFG_GPIO0_TCR); /* enable output driver for outputs */
+#if defined (CONFIG_SYS_GPIO0_TCR)
+ out32(GPIO0_TCR, CONFIG_SYS_GPIO0_TCR); /* enable output driver for outputs */
#endif
-#endif /* CONFIG_405EP ... && !CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_405EP ... && !CONFIG_SYS_4xx_GPIO_TABLE */
#if defined (CONFIG_405EP)
/*
@@ -181,14 +181,14 @@ cpu_init_f (void)
mtdcr(cpc0_pci, mfdcr(cpc0_pci) | CPC0_PCI_HOST_CFG_EN | CPC0_PCI_ARBIT_EN);
#endif /* CONFIG_405EP */
-#if defined(CFG_4xx_GPIO_TABLE)
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
gpio_set_chip_configuration();
-#endif /* CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
/*
* External Bus Controller (EBC) Setup
*/
-#if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
#if (defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
defined(CONFIG_405EX) || defined(CONFIG_405))
@@ -209,47 +209,47 @@ cpu_init_f (void)
asm volatile("2: bdnz 2b" ::: "ctr", "cr0");
#endif
- mtebc(pb0ap, CFG_EBC_PB0AP);
- mtebc(pb0cr, CFG_EBC_PB0CR);
+ mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
+ mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
#endif
-#if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR) && !(CFG_INIT_DCACHE_CS == 1))
- mtebc(pb1ap, CFG_EBC_PB1AP);
- mtebc(pb1cr, CFG_EBC_PB1CR);
+#if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 1))
+ mtebc(pb1ap, CONFIG_SYS_EBC_PB1AP);
+ mtebc(pb1cr, CONFIG_SYS_EBC_PB1CR);
#endif
-#if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR) && !(CFG_INIT_DCACHE_CS == 2))
- mtebc(pb2ap, CFG_EBC_PB2AP);
- mtebc(pb2cr, CFG_EBC_PB2CR);
+#if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 2))
+ mtebc(pb2ap, CONFIG_SYS_EBC_PB2AP);
+ mtebc(pb2cr, CONFIG_SYS_EBC_PB2CR);
#endif
-#if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR) && !(CFG_INIT_DCACHE_CS == 3))
- mtebc(pb3ap, CFG_EBC_PB3AP);
- mtebc(pb3cr, CFG_EBC_PB3CR);
+#if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 3))
+ mtebc(pb3ap, CONFIG_SYS_EBC_PB3AP);
+ mtebc(pb3cr, CONFIG_SYS_EBC_PB3CR);
#endif
-#if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR) && !(CFG_INIT_DCACHE_CS == 4))
- mtebc(pb4ap, CFG_EBC_PB4AP);
- mtebc(pb4cr, CFG_EBC_PB4CR);
+#if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 4))
+ mtebc(pb4ap, CONFIG_SYS_EBC_PB4AP);
+ mtebc(pb4cr, CONFIG_SYS_EBC_PB4CR);
#endif
-#if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR) && !(CFG_INIT_DCACHE_CS == 5))
- mtebc(pb5ap, CFG_EBC_PB5AP);
- mtebc(pb5cr, CFG_EBC_PB5CR);
+#if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 5))
+ mtebc(pb5ap, CONFIG_SYS_EBC_PB5AP);
+ mtebc(pb5cr, CONFIG_SYS_EBC_PB5CR);
#endif
-#if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR) && !(CFG_INIT_DCACHE_CS == 6))
- mtebc(pb6ap, CFG_EBC_PB6AP);
- mtebc(pb6cr, CFG_EBC_PB6CR);
+#if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 6))
+ mtebc(pb6ap, CONFIG_SYS_EBC_PB6AP);
+ mtebc(pb6cr, CONFIG_SYS_EBC_PB6CR);
#endif
-#if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR) && !(CFG_INIT_DCACHE_CS == 7))
- mtebc(pb7ap, CFG_EBC_PB7AP);
- mtebc(pb7cr, CFG_EBC_PB7CR);
+#if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR) && !(CONFIG_SYS_INIT_DCACHE_CS == 7))
+ mtebc(pb7ap, CONFIG_SYS_EBC_PB7AP);
+ mtebc(pb7cr, CONFIG_SYS_EBC_PB7CR);
#endif
-#if defined (CFG_EBC_CFG)
- mtebc(EBC0_CFG, CFG_EBC_CFG);
+#if defined (CONFIG_SYS_EBC_CFG)
+ mtebc(EBC0_CFG, CONFIG_SYS_EBC_CFG);
#endif
#if defined(CONFIG_WATCHDOG)
@@ -261,9 +261,9 @@ cpu_init_f (void)
#else
val |= 0xf0000000; /* generate system reset after 2.684 seconds */
#endif
-#if defined(CFG_4xx_RESET_TYPE)
+#if defined(CONFIG_SYS_4xx_RESET_TYPE)
val &= ~0x30000000; /* clear WRC bits */
- val |= CFG_4xx_RESET_TYPE << 28; /* set board specific WRC type */
+ val |= CONFIG_SYS_4xx_RESET_TYPE << 28; /* set board specific WRC type */
#endif
mtspr(tcr, val);
diff --git a/cpu/ppc4xx/denali_data_eye.c b/cpu/ppc4xx/denali_data_eye.c
index 967e61b..ffc3817 100644
--- a/cpu/ppc4xx/denali_data_eye.c
+++ b/cpu/ppc4xx/denali_data_eye.c
@@ -127,7 +127,7 @@ void denali_core_search_data_eye(void)
0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55
};
- ram_pointer = (volatile u32 *)(CFG_SDRAM_BASE);
+ ram_pointer = (volatile u32 *)(CONFIG_SYS_SDRAM_BASE);
for (wr_dqs_shift = 64; wr_dqs_shift < 96; wr_dqs_shift++) {
/* for (wr_dqs_shift=1; wr_dqs_shift<96; wr_dqs_shift++) { */
diff --git a/cpu/ppc4xx/denali_spd_ddr2.c b/cpu/ppc4xx/denali_spd_ddr2.c
index 670fc5c..4705e21 100644
--- a/cpu/ppc4xx/denali_spd_ddr2.c
+++ b/cpu/ppc4xx/denali_spd_ddr2.c
@@ -1048,8 +1048,8 @@ phys_size_t initdram(int board_type)
* before continuing.
*/
/* switch to correct I2C bus */
- I2C_SET_BUS(CFG_SPD_BUS_NUM);
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/*------------------------------------------------------------------
* Clear out the serial presence detect buffers.
@@ -1185,27 +1185,27 @@ phys_size_t initdram(int board_type)
* Map the first 1 MiB of memory in the TLB, and perform the data eye
* search.
*/
- program_tlb(0, CFG_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE, TLB_WORD2_I_ENABLE);
denali_core_search_data_eye();
denali_sdram_register_dump();
- remove_tlb(CFG_SDRAM_BASE, TLB_1MB_SIZE);
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, TLB_1MB_SIZE);
#endif
#if defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC)
- program_tlb(0, CFG_SDRAM_BASE, dram_size, 0);
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, 0);
sync();
/* Zero the memory */
debug("Zeroing SDRAM...");
-#if defined(CFG_MEM_TOP_HIDE)
- dcbz_area(CFG_SDRAM_BASE, dram_size - CFG_MEM_TOP_HIDE);
+#if defined(CONFIG_SYS_MEM_TOP_HIDE)
+ dcbz_area(CONFIG_SYS_SDRAM_BASE, dram_size - CONFIG_SYS_MEM_TOP_HIDE);
#else
-#error Please define CFG_MEM_TOP_HIDE (see README) in your board config file
+#error Please define CONFIG_SYS_MEM_TOP_HIDE (see README) in your board config file
#endif
/* Write modified dcache lines back to memory */
- clean_dcache_range(CFG_SDRAM_BASE, CFG_SDRAM_BASE + dram_size - CFG_MEM_TOP_HIDE);
+ clean_dcache_range(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_BASE + dram_size - CONFIG_SYS_MEM_TOP_HIDE);
debug("Completed\n");
sync();
- remove_tlb(CFG_SDRAM_BASE, dram_size);
+ remove_tlb(CONFIG_SYS_SDRAM_BASE, dram_size);
#if defined(CONFIG_DDR_ECC)
/*
@@ -1236,7 +1236,7 @@ phys_size_t initdram(int board_type)
#endif /* defined(CONFIG_DDR_ECC) */
#endif /* defined(CONFIG_ZERO_SDRAM) || defined(CONFIG_DDR_ECC) */
- program_tlb(0, CFG_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
+ program_tlb(0, CONFIG_SYS_SDRAM_BASE, dram_size, MY_TLB_WORD2_I_ENABLE);
return dram_size;
}
diff --git a/cpu/ppc4xx/ecc.c b/cpu/ppc4xx/ecc.c
index a2eb07b..3f989e7 100644
--- a/cpu/ppc4xx/ecc.c
+++ b/cpu/ppc4xx/ecc.c
@@ -68,7 +68,7 @@
*
* Output(s):
* start - A pointer to the start of memory covered by ECC with
- * CFG_ECC_PATTERN written to all locations and ECC data
+ * CONFIG_SYS_ECC_PATTERN written to all locations and ECC data
* primed.
*
* Returns:
@@ -76,7 +76,7 @@
*/
void ecc_init(unsigned long * const start, unsigned long size)
{
- const unsigned long pattern = CFG_ECC_PATTERN;
+ const unsigned long pattern = CONFIG_SYS_ECC_PATTERN;
unsigned long * const end = (unsigned long * const)((long)start + size);
unsigned long * current = start;
unsigned long mcopt1;
diff --git a/cpu/ppc4xx/ecc.h b/cpu/ppc4xx/ecc.h
index aecf291..67c3bff 100644
--- a/cpu/ppc4xx/ecc.h
+++ b/cpu/ppc4xx/ecc.h
@@ -33,9 +33,9 @@
#ifndef _ECC_H_
#define _ECC_H_
-#if !defined(CFG_ECC_PATTERN)
-#define CFG_ECC_PATTERN 0x00000000
-#endif /* !defined(CFG_ECC_PATTERN) */
+#if !defined(CONFIG_SYS_ECC_PATTERN)
+#define CONFIG_SYS_ECC_PATTERN 0x00000000
+#endif /* !defined(CONFIG_SYS_ECC_PATTERN) */
/*
* Since the IBM DDR controller used on 440GP/GX/EP/GR is not register
diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c
index df99f53..c0d351a 100644
--- a/cpu/ppc4xx/gpio.c
+++ b/cpu/ppc4xx/gpio.c
@@ -26,8 +26,8 @@
#include <asm/io.h>
#include <asm/gpio.h>
-#if defined(CFG_4xx_GPIO_TABLE)
-gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CFG_4xx_GPIO_TABLE;
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
+gpio_param_s const gpio_tab[GPIO_GROUP_MAX][GPIO_MAX] = CONFIG_SYS_4xx_GPIO_TABLE;
#endif
#if defined(GPIO0_OSRL)
@@ -132,7 +132,7 @@ int gpio_read_in_bit(int pin)
return (in_be32((void *)GPIO0_IR + offs) & GPIO_VAL(pin) ? 1 : 0);
}
-#if defined(CFG_4xx_GPIO_TABLE)
+#if defined(CONFIG_SYS_4xx_GPIO_TABLE)
void gpio_set_chip_configuration(void)
{
unsigned char i=0, j=0, offs=0, gpio_core;
@@ -252,4 +252,4 @@ void gpio_set_chip_configuration(void)
}
}
}
-#endif /* CFG_4xx_GPIO_TABLE */
+#endif /* CONFIG_SYS_4xx_GPIO_TABLE */
diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c
index d8be2ce..0deb149 100644
--- a/cpu/ppc4xx/i2c.c
+++ b/cpu/ppc4xx/i2c.c
@@ -42,8 +42,8 @@ DECLARE_GLOBAL_DATA_PTR;
* runs from ROM, and we can't switch buses because we can't modify
* the global variables.
*/
-#ifdef CFG_SPD_BUS_NUM
-static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CFG_SPD_BUS_NUM;
+#ifdef CONFIG_SYS_SPD_BUS_NUM
+static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = CONFIG_SYS_SPD_BUS_NUM;
#else
static unsigned int i2c_bus_num __attribute__ ((section ("data"))) = 0;
#endif
@@ -95,14 +95,14 @@ void i2c_init(int speed, int slaveadd)
int val, divisor;
int bus;
-#ifdef CFG_I2C_INIT_BOARD
+#ifdef CONFIG_SYS_I2C_INIT_BOARD
/* call board specific i2c bus reset routine before accessing the */
/* environment, which might be in a chip on that bus. For details */
/* about this problem see doc/I2C_Edge_Conditions. */
i2c_init_board();
#endif
- for (bus = 0; bus < CFG_MAX_I2C_BUS; bus++) {
+ for (bus = 0; bus < CONFIG_SYS_MAX_I2C_BUS; bus++) {
I2C_SET_BUS(bus);
/* Handle possible failed I2C state */
@@ -161,7 +161,7 @@ void i2c_init(int speed, int slaveadd)
}
/* set to SPD bus as default bus upon powerup */
- I2C_SET_BUS(CFG_SPD_BUS_NUM);
+ I2C_SET_BUS(CONFIG_SYS_SPD_BUS_NUM);
}
/*
@@ -361,7 +361,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -374,7 +374,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
if ((ret = i2c_transfer(1, chip<<1, &xaddr[4-alen], alen, buffer, len)) != 0) {
if (gd->have_console)
@@ -401,7 +401,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
xaddr[3] = addr & 0xFF;
}
-#ifdef CFG_I2C_EEPROM_ADDR_OVERFLOW
+#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
/*
* EEPROM chips that implement "address overflow" are ones
* like Catalyst 24WC04/08/16 which has 9/10/11 bits of
@@ -414,7 +414,7 @@ int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len)
* hidden in the chip address.
*/
if (alen > 0)
- chip |= ((addr >> (alen * 8)) & CFG_I2C_EEPROM_ADDR_OVERFLOW);
+ chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW);
#endif
return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0);
@@ -451,7 +451,7 @@ unsigned int i2c_get_bus_num(void)
int i2c_set_bus_num(unsigned int bus)
{
- if (bus >= CFG_MAX_I2C_BUS)
+ if (bus >= CONFIG_SYS_MAX_I2C_BUS)
return -1;
i2c_bus_num = bus;
@@ -463,12 +463,12 @@ int i2c_set_bus_num(unsigned int bus)
/* TODO: add 100/400k switching */
unsigned int i2c_get_bus_speed(void)
{
- return CFG_I2C_SPEED;
+ return CONFIG_SYS_I2C_SPEED;
}
int i2c_set_bus_speed(unsigned int speed)
{
- if (speed != CFG_I2C_SPEED)
+ if (speed != CONFIG_SYS_I2C_SPEED)
return -1;
return 0;
diff --git a/cpu/ppc4xx/ndfc.c b/cpu/ppc4xx/ndfc.c
index 7d96e79..3a5af12 100644
--- a/cpu/ppc4xx/ndfc.c
+++ b/cpu/ppc4xx/ndfc.c
@@ -149,8 +149,8 @@ static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len
}
#endif /* #ifndef CONFIG_NAND_SPL */
-#ifndef CFG_NAND_BCR
-#define CFG_NAND_BCR 0x80002222
+#ifndef CONFIG_SYS_NAND_BCR
+#define CONFIG_SYS_NAND_BCR 0x80002222
#endif
void board_nand_select_device(struct nand_chip *nand, int chip)
@@ -165,7 +165,7 @@ void board_nand_select_device(struct nand_chip *nand, int chip)
/* Set NandFlash Core Configuration Register */
/* 1 col x 2 rows */
out_be32((u32 *)(base + NDFC_CCR), 0x00000000 | (cs << 24));
- out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CFG_NAND_BCR);
+ out_be32((u32 *)(base + NDFC_BCFG0 + (cs << 2)), CONFIG_SYS_NAND_BCR);
}
static void ndfc_select_chip(struct mtd_info *mtd, int chip)
@@ -214,8 +214,8 @@ int board_nand_init(struct nand_chip *nand)
*/
mtebc(EBC0_CFG, 0xb8400000);
- mtebc(pb0cr, CFG_EBC_PB0CR);
- mtebc(pb0ap, CFG_EBC_PB0AP);
+ mtebc(pb0cr, CONFIG_SYS_EBC_PB0CR);
+ mtebc(pb0ap, CONFIG_SYS_EBC_PB0AP);
#endif
chip++;
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index b5a6a4c..6d5f8d6 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -37,7 +37,7 @@
#ifndef CONFIG_440
-#ifndef CFG_SDRAM_TABLE
+#ifndef CONFIG_SYS_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
{(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
{(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
@@ -46,72 +46,72 @@ sdram_conf_t mb0cf[] = {
{(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
};
#else
-sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
#endif
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
static ulong ns2clks(ulong ns)
{
ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10);
return ((ns * 10) + bus_period_x_10) / bus_period_x_10;
}
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
static ulong compute_sdtr1(ulong speed)
{
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
ulong tmp;
ulong sdtr1 = 0;
/* CASL */
- if (CFG_SDRAM_CASL < 2)
+ if (CONFIG_SYS_SDRAM_CASL < 2)
sdtr1 |= (1 << SDRAM0_TR_CASL);
else
- if (CFG_SDRAM_CASL > 4)
+ if (CONFIG_SYS_SDRAM_CASL > 4)
sdtr1 |= (3 << SDRAM0_TR_CASL);
else
- sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL);
+ sdtr1 |= ((CONFIG_SYS_SDRAM_CASL-1) << SDRAM0_TR_CASL);
/* PTA */
- tmp = ns2clks(CFG_SDRAM_PTA);
+ tmp = ns2clks(CONFIG_SYS_SDRAM_PTA);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA);
else
sdtr1 |= ((4-1) << SDRAM0_TR_PTA);
/* CTP */
- tmp = ns2clks(CFG_SDRAM_CTP);
+ tmp = ns2clks(CONFIG_SYS_SDRAM_CTP);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP);
else
sdtr1 |= ((4-1) << SDRAM0_TR_CTP);
/* LDF */
- tmp = ns2clks(CFG_SDRAM_LDF);
+ tmp = ns2clks(CONFIG_SYS_SDRAM_LDF);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF);
else
sdtr1 |= ((2-1) << SDRAM0_TR_LDF);
/* RFTA */
- tmp = ns2clks(CFG_SDRAM_RFTA);
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RFTA);
if ((tmp >= 4) && (tmp <= 10))
sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA);
else
sdtr1 |= ((10-4) << SDRAM0_TR_RFTA);
/* RCD */
- tmp = ns2clks(CFG_SDRAM_RCD);
+ tmp = ns2clks(CONFIG_SYS_SDRAM_RCD);
if ((tmp >= 2) && (tmp <= 4))
sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD);
else
sdtr1 |= ((4-1) << SDRAM0_TR_RCD);
return sdtr1;
-#else /* CFG_SDRAM_CASL */
+#else /* CONFIG_SYS_SDRAM_CASL */
/*
* If no values are configured in the board config file
* use the default values, which seem to be ok for most
@@ -133,20 +133,20 @@ static ulong compute_sdtr1(ulong speed)
*/
return 0x0086400d;
}
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
}
/* refresh is expressed in ms */
static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
{
-#ifdef CFG_SDRAM_CASL
+#ifdef CONFIG_SYS_SDRAM_CASL
ulong tmp;
tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000);
tmp /= 1000000;
return ((tmp & 0x00003FF8) << 16);
-#else /* CFG_SDRAM_CASL */
+#else /* CONFIG_SYS_SDRAM_CASL */
if (speed > 100000000) {
/*
* 133 MHz SDRAM
@@ -158,7 +158,7 @@ static ulong compute_rtr(ulong speed, ulong rows, ulong refresh)
*/
return 0x05f00000;
}
-#endif /* CFG_SDRAM_CASL */
+#endif /* CONFIG_SYS_SDRAM_CASL */
}
/*
@@ -256,17 +256,17 @@ phys_size_t initdram(int board_type)
* board config file.
*/
-#ifndef CFG_SDRAM_TABLE
+#ifndef CONFIG_SYS_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
{(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4) */
{(64 << 20), 12, 0x00082001} /* 64MB mode 2, 12x9(4) */
};
#else
-sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+sdram_conf_t mb0cf[] = CONFIG_SYS_SDRAM_TABLE;
#endif
-#ifndef CFG_SDRAM0_TR0
-#define CFG_SDRAM0_TR0 0x41094012
+#ifndef CONFIG_SYS_SDRAM0_TR0
+#define CONFIG_SYS_SDRAM0_TR0 0x41094012
#endif
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
@@ -385,7 +385,7 @@ phys_size_t initdram(int board_type)
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
mtsdram(mem_b0cr, mb0cf[i].reg);
- mtsdram(mem_tr0, CFG_SDRAM0_TR0);
+ mtsdram(mem_tr0, CONFIG_SYS_SDRAM0_TR0);
mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
mtsdram(mem_rtr, 0x04100000); /* Interval 7.8�s @ 133MHz PLB */
mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h
index 4fb9b1a..bea3376 100644
--- a/cpu/ppc4xx/sdram.h
+++ b/cpu/ppc4xx/sdram.h
@@ -47,19 +47,19 @@ typedef struct sdram_conf_s sdram_conf_t;
#define SDRAM0_TR_RFTA (31 - 29)
#define SDRAM0_TR_RCD (31 - 31)
-#ifdef CFG_SDRAM_CL
+#ifdef CONFIG_SYS_SDRAM_CL
/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */
-#define CFG_SDRAM_CASL CFG_SDRAM_CL
-#define CFG_SDRAM_PTA CFG_SDRAM_tRP
-#define CFG_SDRAM_CTP (CFG_SDRAM_tRC - CFG_SDRAM_tRCD - CFG_SDRAM_tRP)
-#define CFG_SDRAM_LDF 0
-#ifdef CFG_SDRAM_tRFC
-#define CFG_SDRAM_RFTA CFG_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_CASL CONFIG_SYS_SDRAM_CL
+#define CONFIG_SYS_SDRAM_PTA CONFIG_SYS_SDRAM_tRP
+#define CONFIG_SYS_SDRAM_CTP (CONFIG_SYS_SDRAM_tRC - CONFIG_SYS_SDRAM_tRCD - CONFIG_SYS_SDRAM_tRP)
+#define CONFIG_SYS_SDRAM_LDF 0
+#ifdef CONFIG_SYS_SDRAM_tRFC
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRFC
#else
-#define CFG_SDRAM_RFTA CFG_SDRAM_tRC
+#define CONFIG_SYS_SDRAM_RFTA CONFIG_SYS_SDRAM_tRC
#endif
-#define CFG_SDRAM_RCD CFG_SDRAM_tRCD
-#endif /* #ifdef CFG_SDRAM_CL */
+#define CONFIG_SYS_SDRAM_RCD CONFIG_SYS_SDRAM_tRCD
+#endif /* #ifdef CONFIG_SYS_SDRAM_CL */
/*
* Some defines for the 440 DDR controller
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 97411bd..31902a0 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -77,69 +77,69 @@
#define CONFIG_IDENT_STRING ""
#endif
-#ifdef CFG_INIT_DCACHE_CS
-# if (CFG_INIT_DCACHE_CS == 0)
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
+# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
# define PBxAP pb0ap
# define PBxCR pb0cr
-# if (defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
-# define PBxAP_VAL CFG_EBC_PB0AP
-# define PBxCR_VAL CFG_EBC_PB0CR
+# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 1)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
# define PBxAP pb1ap
# define PBxCR pb1cr
-# if (defined(CFG_EBC_PB1AP) && defined(CFG_EBC_PB1CR))
-# define PBxAP_VAL CFG_EBC_PB1AP
-# define PBxCR_VAL CFG_EBC_PB1CR
+# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 2)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
# define PBxAP pb2ap
# define PBxCR pb2cr
-# if (defined(CFG_EBC_PB2AP) && defined(CFG_EBC_PB2CR))
-# define PBxAP_VAL CFG_EBC_PB2AP
-# define PBxCR_VAL CFG_EBC_PB2CR
+# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 3)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
# define PBxAP pb3ap
# define PBxCR pb3cr
-# if (defined(CFG_EBC_PB3AP) && defined(CFG_EBC_PB3CR))
-# define PBxAP_VAL CFG_EBC_PB3AP
-# define PBxCR_VAL CFG_EBC_PB3CR
+# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 4)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
# define PBxAP pb4ap
# define PBxCR pb4cr
-# if (defined(CFG_EBC_PB4AP) && defined(CFG_EBC_PB4CR))
-# define PBxAP_VAL CFG_EBC_PB4AP
-# define PBxCR_VAL CFG_EBC_PB4CR
+# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 5)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
# define PBxAP pb5ap
# define PBxCR pb5cr
-# if (defined(CFG_EBC_PB5AP) && defined(CFG_EBC_PB5CR))
-# define PBxAP_VAL CFG_EBC_PB5AP
-# define PBxCR_VAL CFG_EBC_PB5CR
+# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 6)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
# define PBxAP pb6ap
# define PBxCR pb6cr
-# if (defined(CFG_EBC_PB6AP) && defined(CFG_EBC_PB6CR))
-# define PBxAP_VAL CFG_EBC_PB6AP
-# define PBxCR_VAL CFG_EBC_PB6CR
+# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
# endif
# endif
-# if (CFG_INIT_DCACHE_CS == 7)
+# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
# define PBxAP pb7ap
# define PBxCR pb7cr
-# if (defined(CFG_EBC_PB7AP) && defined(CFG_EBC_PB7CR))
-# define PBxAP_VAL CFG_EBC_PB7AP
-# define PBxCR_VAL CFG_EBC_PB7CR
+# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
+# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
+# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
# endif
# endif
# ifndef PBxAP_VAL
@@ -149,11 +149,11 @@
# define PBxCR_VAL 0
# endif
/*
- * Memory Bank x (nothingness) initialization CFG_INIT_RAM_ADDR + 64 MiB
+ * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
* used as temporary stack pointer for the primordial stack
*/
-# ifndef CFG_INIT_DCACHE_PBxAR
-# define CFG_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
+# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
EBC_BXAP_TWT_ENCODE(7) | \
EBC_BXAP_BCE_DISABLE | \
EBC_BXAP_BCT_2TRANS | \
@@ -166,42 +166,42 @@
EBC_BXAP_SOR_NONDELAYED | \
EBC_BXAP_BEM_WRITEONLY | \
EBC_BXAP_PEN_DISABLED)
-# endif /* CFG_INIT_DCACHE_PBxAR */
-# ifndef CFG_INIT_DCACHE_PBxCR
-# define CFG_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CFG_INIT_RAM_ADDR) | \
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
+# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
+# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
EBC_BXCR_BS_64MB | \
EBC_BXCR_BU_RW | \
EBC_BXCR_BW_16BIT)
-# endif /* CFG_INIT_DCACHE_PBxCR */
-# ifndef CFG_INIT_RAM_PATTERN
-# define CFG_INIT_RAM_PATTERN 0xDEADDEAD
+# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
+# ifndef CONFIG_SYS_INIT_RAM_PATTERN
+# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
# endif
-#endif /* CFG_INIT_DCACHE_CS */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-#if (defined(CFG_INIT_RAM_DCACHE) && (CFG_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CFG_INIT_RAM_END!
+#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
+#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
#endif
/*
* Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CFG_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CFG_FLASH_BASE. Disable all cacheable data regions.
+ * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
+ * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
*/
-#if !defined(CFG_FLASH_BASE)
+#if !defined(CONFIG_SYS_FLASH_BASE)
/* If not already defined, set it to the "last" 128MByte region */
-# define CFG_FLASH_BASE 0xf8000000
+# define CONFIG_SYS_FLASH_BASE 0xf8000000
#endif
-#if !defined(CFG_ICACHE_SACR_VALUE)
-# define CFG_ICACHE_SACR_VALUE \
- (PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + ( 0 << 20)) | \
- PPC_128MB_SACR_VALUE(CFG_SDRAM_BASE + (128 << 20)) | \
- PPC_128MB_SACR_VALUE(CFG_FLASH_BASE))
-#endif /* !defined(CFG_ICACHE_SACR_VALUE) */
-
-#if !defined(CFG_DCACHE_SACR_VALUE)
-# define CFG_DCACHE_SACR_VALUE \
+#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
+# define CONFIG_SYS_ICACHE_SACR_VALUE \
+ (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
+ PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
+#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
+
+#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
+# define CONFIG_SYS_DCACHE_SACR_VALUE \
(0x00000000)
-#endif /* !defined(CFG_DCACHE_SACR_VALUE) */
+#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
#define function_prolog(func_name) .text; \
.align 2; \
@@ -609,15 +609,15 @@ _start:
/*----------------------------------------------------------------*/
/* Debug setup -- some (not very good) ice's need an event*/
- /* to establish control :-( Define CFG_INIT_DBCR to the dbsr */
+ /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
/* value you need in this case 0x8cff 0000 should do the trick */
/*----------------------------------------------------------------*/
-#if defined(CFG_INIT_DBCR)
+#if defined(CONFIG_SYS_INIT_DBCR)
lis r1,0xffff
ori r1,r1,0xffff
mtspr dbsr,r1 /* Clear all status bits */
- lis r0,CFG_INIT_DBCR@h
- ori r0,r0,CFG_INIT_DBCR@l
+ lis r0,CONFIG_SYS_INIT_DBCR@h
+ ori r0,r0,CONFIG_SYS_INIT_DBCR@l
mtspr dbcr0,r0
isync
#endif
@@ -627,12 +627,12 @@ _start:
/*----------------------------------------------------------------*/
li r0,0
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/* Clear Dcache to use as RAM */
- addis r3,r0,CFG_INIT_RAM_ADDR@h
- ori r3,r3,CFG_INIT_RAM_ADDR@l
- addis r4,r0,CFG_INIT_RAM_END@h
- ori r4,r4,CFG_INIT_RAM_END@l
+ addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
+ addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
+ ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
rlwinm. r5,r4,0,27,31
rlwinm r5,r4,27,5,31
beq ..d_ran
@@ -670,7 +670,7 @@ _start:
mtspr dtv3,r1
msync
isync
-#endif /* CFG_INIT_RAM_DCACHE */
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
/* 440EP & 440GR are only 440er PPC's without internal SRAM */
#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
@@ -744,8 +744,8 @@ _start:
/*----------------------------------------------------------------*/
/* Setup the stack in internal SRAM */
/*----------------------------------------------------------------*/
- lis r1,CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET@l
+ lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
li r0,0
stwu r0,-4(r1)
stwu r0,-4(r1) /* Terminate call chain */
@@ -852,18 +852,18 @@ _start:
sync
/* Set-up icache cacheability. */
- lis r1, CFG_ICACHE_SACR_VALUE@h
- ori r1, r1, CFG_ICACHE_SACR_VALUE@l
+ lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
mticcr r1
isync
/* Set-up dcache cacheability. */
- lis r1, CFG_DCACHE_SACR_VALUE@h
- ori r1, r1, CFG_DCACHE_SACR_VALUE@l
+ lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
mtdccr r1
- addis r1,r0,CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack to SDRAM */
+ addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
@@ -908,31 +908,31 @@ _start:
bl invalidate_dcache
/* Set-up icache cacheability. */
- lis r4, CFG_ICACHE_SACR_VALUE@h
- ori r4, r4, CFG_ICACHE_SACR_VALUE@l
+ lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
mticcr r4
isync
/* Set-up dcache cacheability. */
- lis r4, CFG_DCACHE_SACR_VALUE@h
- ori r4, r4, CFG_DCACHE_SACR_VALUE@l
+ lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
+ ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
mtdccr r4
-#if !(defined(CFG_EBC_PB0AP) && defined(CFG_EBC_PB0CR))
+#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
/*----------------------------------------------------------------------- */
/* Tune the speed and size for flash CS0 */
/*----------------------------------------------------------------------- */
bl ext_bus_cntlr_init
#endif
-#if !(defined(CFG_INIT_DCACHE_CS) || defined(CFG_TEMP_STACK_OCM))
+#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
/*
* For boards that don't have OCM and can't use the data cache
* for their primordial stack, setup stack here directly after the
* SDRAM is initialized in ext_bus_cntlr_init.
*/
- lis r1, CFG_INIT_RAM_ADDR@h
- ori r1,r1,CFG_INIT_SP_OFFSET /* set up the stack in SDRAM */
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
li r0, 0 /* Make room for stack frame header and */
stwu r0, -4(r1) /* clear final stack frame so that */
@@ -946,7 +946,7 @@ _start:
ori r0, r0, RESET_VECTOR@l
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CFG_INIT_DCACHE_CS || !CFG_TEM_STACK_OCM) */
+#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
#if defined(CONFIG_405EP)
/*----------------------------------------------------------------------- */
@@ -959,25 +959,25 @@ _start:
bl ppc405ep_init /* do ppc405ep specific init */
#endif /* CONFIG_405EP */
-#if defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE)
+#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
#if defined(CONFIG_405EZ)
/********************************************************************
* Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
*******************************************************************/
/*
* We can map the OCM on the PLB3, so map it at
- * CFG_OCM_DATA_ADDR + 0x8000
+ * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
*/
- lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CFG_OCM_DATA_ADDR@l
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
mtdcr ocmplb3cr1,r3 /* Set PLB Access */
ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
mtdcr ocmplb3cr2,r3 /* Set PLB Access */
isync
- lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CFG_OCM_DATA_ADDR@l
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
mtdcr ocmdscr1, r3 /* Set Data Side */
mtdcr ocmiscr1, r3 /* Set Instruction Side */
@@ -1003,8 +1003,8 @@ _start:
mtdcr ocmdscntl, r4 /* set data-side IRAM config */
isync
- lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CFG_OCM_DATA_ADDR@l
+ lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
+ ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
mtdcr ocmdsarc, r3
addis r4, 0, 0xC000 /* OCM data area enabled */
mtdcr ocmdscntl, r4
@@ -1015,26 +1015,26 @@ _start:
/*----------------------------------------------------------------------- */
/* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
/*----------------------------------------------------------------------- */
-#ifdef CFG_INIT_DCACHE_CS
+#ifdef CONFIG_SYS_INIT_DCACHE_CS
li r4, PBxAP
mtdcr ebccfga, r4
- lis r4, CFG_INIT_DCACHE_PBxAR@h
- ori r4, r4, CFG_INIT_DCACHE_PBxAR@l
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
mtdcr ebccfgd, r4
addi r4, 0, PBxCR
mtdcr ebccfga, r4
- lis r4, CFG_INIT_DCACHE_PBxCR@h
- ori r4, r4, CFG_INIT_DCACHE_PBxCR@l
+ lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
+ ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
mtdcr ebccfgd, r4
/*
* Enable the data cache for the 128MB storage access control region
- * at CFG_INIT_RAM_ADDR.
+ * at CONFIG_SYS_INIT_RAM_ADDR.
*/
mfdccr r4
- oris r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
- ori r4, r4, PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
+ oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
mtdccr r4
/*
@@ -1044,11 +1044,11 @@ _start:
*/
li r0, 0
- lis r3, CFG_INIT_RAM_ADDR@h
- ori r3, r3, CFG_INIT_RAM_ADDR@l
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- lis r4, CFG_INIT_RAM_END@h
- ori r4, r4, CFG_INIT_RAM_END@l
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
/*
* Convert the size, in bytes, to the number of cache lines/blocks
@@ -1072,18 +1072,18 @@ _start:
* Load the initial stack pointer and data area and convert the size,
* in bytes, to the number of words to initialize to a known value.
*/
- lis r1, CFG_INIT_RAM_ADDR@h
- ori r1, r1, CFG_INIT_SP_OFFSET@l
+ lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
- lis r4, (CFG_INIT_RAM_END >> 2)@h
- ori r4, r4, (CFG_INIT_RAM_END >> 2)@l
+ lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
+ ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
mtctr r4
- lis r2, CFG_INIT_RAM_ADDR@h
- ori r2, r2, CFG_INIT_RAM_END@l
+ lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
- lis r4, CFG_INIT_RAM_PATTERN@h
- ori r4, r4, CFG_INIT_RAM_PATTERN@l
+ lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
..stackloop:
stwu r4, -4(r2)
@@ -1106,15 +1106,15 @@ _start:
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
-#elif defined(CFG_TEMP_STACK_OCM) && \
- (defined(CFG_OCM_DATA_ADDR) && defined(CFG_OCM_DATA_SIZE))
+#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
+ (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
/*
* Stack in OCM.
*/
/* Set up Stack at top of OCM */
- lis r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@h
- ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET)@l
+ lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
+ ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
/* Set up a zeroized stack frame so that backtrace works right */
li r0, 0
@@ -1130,7 +1130,7 @@ _start:
ori r0, r0, RESET_VECTOR@l
stwu r1, -8(r1) /* Save back chain and move SP */
stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CFG_INIT_DCACHE_CS */
+#endif /* CONFIG_SYS_INIT_DCACHE_CS */
#ifdef CONFIG_NAND_SPL
bl nand_boot_common /* will not return */
@@ -1341,7 +1341,7 @@ in32r:
*/
.globl relocate_code
relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS)
+#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
* We need to flush the initial global data (gd_t) before the dcache
* will be invalidated.
@@ -1354,10 +1354,10 @@ relocate_code:
/* Flush initial global data range */
mr r3, r4
- addi r4, r4, CFG_GBL_DATA_SIZE@l
+ addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
bl flush_dcache_range
-#if defined(CFG_INIT_DCACHE_CS)
+#if defined(CONFIG_SYS_INIT_DCACHE_CS)
/*
* Undo the earlier data cache set-up for the primordial stack and
* data area. First, invalidate the data cache and then disable data
@@ -1366,19 +1366,19 @@ relocate_code:
*/
/* Invalidate the primordial stack and data area in cache */
- lis r3, CFG_INIT_RAM_ADDR@h
- ori r3, r3, CFG_INIT_RAM_ADDR@l
+ lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
+ ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
- lis r4, CFG_INIT_RAM_END@h
- ori r4, r4, CFG_INIT_RAM_END@l
+ lis r4, CONFIG_SYS_INIT_RAM_END@h
+ ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
add r4, r4, r3
bl invalidate_dcache_range
/* Disable cacheability for the region */
mfdccr r3
- lis r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@h
- ori r4, r4, ~PPC_128MB_SACR_VALUE(CFG_INIT_RAM_ADDR)@l
+ lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
+ ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
and r3, r3, r4
mtdccr r3
@@ -1394,15 +1394,15 @@ relocate_code:
lis r3, PBxCR_VAL@h
ori r3, r3, PBxCR_VAL@l
mtdcr ebccfgd, r3
-#endif /* defined(CFG_INIT_DCACHE_CS) */
+#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
/* Restore registers */
mr r3, r9
mr r4, r10
mr r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CFG_INIT_DCACHE_CS) */
+#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
-#ifdef CFG_INIT_RAM_DCACHE
+#ifdef CONFIG_SYS_INIT_RAM_DCACHE
/*
* Unlock the previously locked d-cache
*/
@@ -1424,7 +1424,7 @@ relocate_code:
mtspr dtv3,r6
msync
isync
-#endif /* CFG_INIT_RAM_DCACHE */
+#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
@@ -1439,11 +1439,11 @@ relocate_code:
dccci 0,0 /* Invalidate data cache, now no longer our stack */
sync
isync
-#ifdef CFG_TLB_FOR_BOOT_FLASH
- addi r1,r0,CFG_TLB_FOR_BOOT_FLASH /* Use defined TLB */
+#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
+ addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
#else
addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CFG_TLB_FOR_BOOT_FLASH */
+#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
tlbre r0,r1,0x0002 /* Read contents */
ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
tlbwe r0,r1,0x0002 /* Save it out */
@@ -1455,8 +1455,8 @@ relocate_code:
mr r10, r5 /* Save copy of Destination Address */
mr r3, r5 /* Destination Address */
- lis r4, CFG_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CFG_MONITOR_BASE@l
+ lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
lwz r5, GOT(__init_end)
sub r5, r5, r4
li r6, L1_CACHE_BYTES /* Cache Line Size */
@@ -1464,7 +1464,7 @@ relocate_code:
/*
* Fix GOT pointer:
*
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
+ * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
*
* Offset:
*/
@@ -1775,74 +1775,74 @@ ppc405ep_init:
lis r3,GPIO0_OSRH@h /* config GPIO output select */
ori r3,r3,GPIO0_OSRH@l
- lis r4,CFG_GPIO0_OSRH@h
- ori r4,r4,CFG_GPIO0_OSRH@l
+ lis r4,CONFIG_SYS_GPIO0_OSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
stw r4,0(r3)
lis r3,GPIO0_OSRL@h
ori r3,r3,GPIO0_OSRL@l
- lis r4,CFG_GPIO0_OSRL@h
- ori r4,r4,CFG_GPIO0_OSRL@l
+ lis r4,CONFIG_SYS_GPIO0_OSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
stw r4,0(r3)
lis r3,GPIO0_ISR1H@h /* config GPIO input select */
ori r3,r3,GPIO0_ISR1H@l
- lis r4,CFG_GPIO0_ISR1H@h
- ori r4,r4,CFG_GPIO0_ISR1H@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1H@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
stw r4,0(r3)
lis r3,GPIO0_ISR1L@h
ori r3,r3,GPIO0_ISR1L@l
- lis r4,CFG_GPIO0_ISR1L@h
- ori r4,r4,CFG_GPIO0_ISR1L@l
+ lis r4,CONFIG_SYS_GPIO0_ISR1L@h
+ ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
stw r4,0(r3)
lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
ori r3,r3,GPIO0_TSRH@l
- lis r4,CFG_GPIO0_TSRH@h
- ori r4,r4,CFG_GPIO0_TSRH@l
+ lis r4,CONFIG_SYS_GPIO0_TSRH@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
stw r4,0(r3)
lis r3,GPIO0_TSRL@h
ori r3,r3,GPIO0_TSRL@l
- lis r4,CFG_GPIO0_TSRL@h
- ori r4,r4,CFG_GPIO0_TSRL@l
+ lis r4,CONFIG_SYS_GPIO0_TSRL@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
stw r4,0(r3)
lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
ori r3,r3,GPIO0_TCR@l
- lis r4,CFG_GPIO0_TCR@h
- ori r4,r4,CFG_GPIO0_TCR@l
+ lis r4,CONFIG_SYS_GPIO0_TCR@h
+ ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
stw r4,0(r3)
li r3,pb1ap /* program EBC bank 1 for RTC access */
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB1AP@h
- ori r3,r3,CFG_EBC_PB1AP@l
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
mtdcr ebccfgd,r3
li r3,pb1cr
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB1CR@h
- ori r3,r3,CFG_EBC_PB1CR@l
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
mtdcr ebccfgd,r3
li r3,pb1ap /* program EBC bank 1 for RTC access */
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB1AP@h
- ori r3,r3,CFG_EBC_PB1AP@l
+ lis r3,CONFIG_SYS_EBC_PB1AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
mtdcr ebccfgd,r3
li r3,pb1cr
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB1CR@h
- ori r3,r3,CFG_EBC_PB1CR@l
+ lis r3,CONFIG_SYS_EBC_PB1CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
mtdcr ebccfgd,r3
li r3,pb4ap /* program EBC bank 4 for FPGA access */
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB4AP@h
- ori r3,r3,CFG_EBC_PB4AP@l
+ lis r3,CONFIG_SYS_EBC_PB4AP@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
mtdcr ebccfgd,r3
li r3,pb4cr
mtdcr ebccfga,r3
- lis r3,CFG_EBC_PB4CR@h
- ori r3,r3,CFG_EBC_PB4CR@l
+ lis r3,CONFIG_SYS_EBC_PB4CR@h
+ ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
mtdcr ebccfgd,r3
#endif
@@ -2111,20 +2111,20 @@ nand_boot_common:
* First initialize SDRAM. It has to be available *before* calling
* nand_boot().
*/
- lis r3,CFG_SDRAM_BASE@h
- ori r3,r3,CFG_SDRAM_BASE@l
+ lis r3,CONFIG_SYS_SDRAM_BASE@h
+ ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
bl initdram
/*
* Now copy the 4k SPL code into SDRAM and continue execution
* from there.
*/
- lis r3,CFG_NAND_BOOT_SPL_DST@h
- ori r3,r3,CFG_NAND_BOOT_SPL_DST@l
- lis r4,CFG_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CFG_NAND_BOOT_SPL_SRC@l
- lis r5,CFG_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CFG_NAND_BOOT_SPL_SIZE@l
+ lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
+ ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
+ lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
+ ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
+ lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
+ ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
bl nand_boot_relocate
/*
diff --git a/cpu/ppc4xx/usb.c b/cpu/ppc4xx/usb.c
index cb8d5c7..592efe7 100644
--- a/cpu/ppc4xx/usb.c
+++ b/cpu/ppc4xx/usb.c
@@ -23,7 +23,7 @@
#include <common.h>
-#if defined(CONFIG_USB_OHCI_NEW) && defined(CFG_USB_OHCI_CPU_INIT)
+#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT)
#ifdef CONFIG_4xx_DCACHE
#include <asm/mmu.h>
@@ -63,4 +63,4 @@ int usb_cpu_init_fail(void)
return 0;
}
-#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */
diff --git a/cpu/ppc4xx/usb_ohci.c b/cpu/ppc4xx/usb_ohci.c
index 5dbd842..2c80d5c 100644
--- a/cpu/ppc4xx/usb_ohci.c
+++ b/cpu/ppc4xx/usb_ohci.c
@@ -1600,9 +1600,9 @@ int usb_lowlevel_init(void)
gohci.sleeping = 0;
gohci.irq = -1;
#if defined(CONFIG_440EP)
- gohci.regs = (struct ohci_regs *)(CFG_PERIPHERAL_BASE | 0x1000);
-#elif defined(CONFIG_440EPX) || defined(CFG_USB_HOST)
- gohci.regs = (struct ohci_regs *)(CFG_USB_HOST);
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_PERIPHERAL_BASE | 0x1000);
+#elif defined(CONFIG_440EPX) || defined(CONFIG_SYS_USB_HOST)
+ gohci.regs = (struct ohci_regs *)(CONFIG_SYS_USB_HOST);
#endif
gohci.flags = 0;
diff --git a/cpu/ppc4xx/usbdev.h b/cpu/ppc4xx/usbdev.h
index 3446d98..ef6a2da 100644
--- a/cpu/ppc4xx/usbdev.h
+++ b/cpu/ppc4xx/usbdev.h
@@ -1,31 +1,31 @@
#include <config.h>
/*Common Registers*/
-#define USB2D0_INTRIN_16 (CFG_USB_DEVICE | 0x100)
-#define USB2D0_POWER_8 (CFG_USB_DEVICE | 0x102)
-#define USB2D0_FADDR_8 (CFG_USB_DEVICE | 0x103)
-#define USB2D0_INTRINE_16 (CFG_USB_DEVICE | 0x104)
-#define USB2D0_INTROUT_16 (CFG_USB_DEVICE | 0x106)
-#define USB2D0_INTRUSBE_8 (CFG_USB_DEVICE | 0x108)
-#define USB2D0_INTRUSB_8 (CFG_USB_DEVICE | 0x109)
-#define USB2D0_INTROUTE_16 (CFG_USB_DEVICE | 0x10a)
-#define USB2D0_TSTMODE_8 (CFG_USB_DEVICE | 0x10c)
-#define USB2D0_INDEX_8 (CFG_USB_DEVICE | 0x10d)
-#define USB2D0_FRAME_16 (CFG_USB_DEVICE | 0x10e)
+#define USB2D0_INTRIN_16 (CONFIG_SYS_USB_DEVICE | 0x100)
+#define USB2D0_POWER_8 (CONFIG_SYS_USB_DEVICE | 0x102)
+#define USB2D0_FADDR_8 (CONFIG_SYS_USB_DEVICE | 0x103)
+#define USB2D0_INTRINE_16 (CONFIG_SYS_USB_DEVICE | 0x104)
+#define USB2D0_INTROUT_16 (CONFIG_SYS_USB_DEVICE | 0x106)
+#define USB2D0_INTRUSBE_8 (CONFIG_SYS_USB_DEVICE | 0x108)
+#define USB2D0_INTRUSB_8 (CONFIG_SYS_USB_DEVICE | 0x109)
+#define USB2D0_INTROUTE_16 (CONFIG_SYS_USB_DEVICE | 0x10a)
+#define USB2D0_TSTMODE_8 (CONFIG_SYS_USB_DEVICE | 0x10c)
+#define USB2D0_INDEX_8 (CONFIG_SYS_USB_DEVICE | 0x10d)
+#define USB2D0_FRAME_16 (CONFIG_SYS_USB_DEVICE | 0x10e)
/*Indexed Registers*/
-#define USB2D0_INCSR0_8 (CFG_USB_DEVICE | 0x110)
-#define USB2D0_INCSR_16 (CFG_USB_DEVICE | 0x110)
-#define USB2D0_INMAXP_16 (CFG_USB_DEVICE | 0x112)
-#define USB2D0_OUTCSR_16 (CFG_USB_DEVICE | 0x114)
-#define USB2D0_OUTMAXP_16 (CFG_USB_DEVICE | 0x116)
-#define USB2D0_OUTCOUNT0_8 (CFG_USB_DEVICE | 0x11a)
-#define USB2D0_OUTCOUNT_16 (CFG_USB_DEVICE | 0x11a)
+#define USB2D0_INCSR0_8 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INCSR_16 (CONFIG_SYS_USB_DEVICE | 0x110)
+#define USB2D0_INMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x112)
+#define USB2D0_OUTCSR_16 (CONFIG_SYS_USB_DEVICE | 0x114)
+#define USB2D0_OUTMAXP_16 (CONFIG_SYS_USB_DEVICE | 0x116)
+#define USB2D0_OUTCOUNT0_8 (CONFIG_SYS_USB_DEVICE | 0x11a)
+#define USB2D0_OUTCOUNT_16 (CONFIG_SYS_USB_DEVICE | 0x11a)
/*FIFOs*/
-#define USB2D0_FIFO_0 (CFG_USB_DEVICE | 0x120)
-#define USB2D0_FIFO_1 (CFG_USB_DEVICE | 0x124)
-#define USB2D0_FIFO_2 (CFG_USB_DEVICE | 0x128)
-#define USB2D0_FIFO_3 (CFG_USB_DEVICE | 0x12c)
+#define USB2D0_FIFO_0 (CONFIG_SYS_USB_DEVICE | 0x120)
+#define USB2D0_FIFO_1 (CONFIG_SYS_USB_DEVICE | 0x124)
+#define USB2D0_FIFO_2 (CONFIG_SYS_USB_DEVICE | 0x128)
+#define USB2D0_FIFO_3 (CONFIG_SYS_USB_DEVICE | 0x12c)
void usb_dev_init(void);