Add support for AMCC PPC440EP/GR eval boards Yosemite and Yellowstone.

Patch by Steven Blakeslee, 27 Jul 2005

1 files changed, 214 insertions, 0 deletions

diff --git a/cpu/ppc4xx/usbdev.c b/cpu/ppc4xx/usbdev.c
new file mode 100644
index 0000000..f0901ac
--- /dev/null
+++ b/cpu/ppc4xx/usbdev.c
@@ -0,0 +1,214 @@
+/*USB 1.1,2.0 device*/
+
+#include <common.h>
+#include <asm/processor.h>
+
+#ifdef CONFIG_440_EP
+
+#include <usb.h>
+#include "usbdev.h"
+#include "vecnum.h"
+
+#define USB_DT_DEVICE        0x01
+#define USB_DT_CONFIG        0x02
+#define USB_DT_STRING        0x03
+#define USB_DT_INTERFACE     0x04
+#define USB_DT_ENDPOINT      0x05
+
+unsigned char set_value = -1;
+
+void process_endpoints(unsigned short usb2d0_intrin)
+{
+	/*will hold the packet received */
+	struct usb_device_descriptor usb_device_packet;
+	struct usb_config_descriptor usb_config_packet;
+	struct usb_string_descriptor usb_string_packet;
+	struct devrequest setup_packet;
+	unsigned int *setup_packet_pt;
+	unsigned char *packet_pt;
+	int temp, temp1;
+
+	int i;
+
+	/*printf("{USB device} - endpoint 0x%X \n", usb2d0_intrin); */
+
+	/*set usb address, seems to not work unless it is done in the next
+	   interrupt, so that is why it is done this way */
+	if (set_value != -1)
+		*(unsigned char *)USB2D0_FADDR_8 = set_value;
+
+	/*endpoint 1 */
+	if (usb2d0_intrin & 0x01) {
+		setup_packet_pt = (unsigned int *)&setup_packet;
+
+		/*copy packet */
+		setup_packet_pt[0] = *(unsigned int *)USB2D0_FIFO_0;
+		setup_packet_pt[1] = *(unsigned int *)USB2D0_FIFO_0;
+		temp = *(unsigned int *)USB2D0_FIFO_0;
+		temp1 = *(unsigned int *)USB2D0_FIFO_0;
+
+		/*do some swapping */
+		setup_packet.value = swap_16(setup_packet.value);
+		setup_packet.index = swap_16(setup_packet.index);
+		setup_packet.length = swap_16(setup_packet.length);
+
+		/*clear rx packet */
+		*(unsigned short *)USB2D0_INCSR0_8 = 0x48;
+
+		/*printf("0x%X 0x%X 0x%X 0x%X 0x%X 0x%X 0x%X\n", setup_packet.requesttype,
+		   setup_packet.request, setup_packet.value,
+		   setup_packet.index, setup_packet.length, temp, temp1 ); */
+
+		switch (setup_packet.request) {
+		case USB_REQ_GET_DESCRIPTOR:
+
+			switch (setup_packet.value >> 8) {
+			case USB_DT_DEVICE:
+				/*create packet */
+				usb_device_packet.bLength = 18;
+				usb_device_packet.bDescriptorType =
+				    USB_DT_DEVICE;
+#ifdef USB_2_0_DEVICE
+				usb_device_packet.bcdUSB = swap_16(0x200);
+#else
+				usb_device_packet.bcdUSB = swap_16(0x110);
+#endif
+				usb_device_packet.bDeviceClass = 0xff;
+				usb_device_packet.bDeviceSubClass = 0;
+				usb_device_packet.bDeviceProtocol = 0;
+				usb_device_packet.bMaxPacketSize0 = 32;
+				usb_device_packet.idVendor = swap_16(1);
+				usb_device_packet.idProduct = swap_16(2);
+				usb_device_packet.bcdDevice = swap_16(0x300);
+				usb_device_packet.iManufacturer = 1;
+				usb_device_packet.iProduct = 1;
+				usb_device_packet.iSerialNumber = 1;
+				usb_device_packet.bNumConfigurations = 1;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_device_packet;
+				break;
+
+			case USB_DT_CONFIG:
+				/*create packet */
+				usb_config_packet.bLength = 9;
+				usb_config_packet.bDescriptorType =
+				    USB_DT_CONFIG;
+				usb_config_packet.wTotalLength = swap_16(25);
+				usb_config_packet.bNumInterfaces = 1;
+				usb_config_packet.bConfigurationValue = 1;
+				usb_config_packet.iConfiguration = 0;
+				usb_config_packet.bmAttributes = 0x40;
+				usb_config_packet.MaxPower = 0;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_config_packet;
+				break;
+
+			case USB_DT_STRING:
+				/*create packet */
+				usb_string_packet.bLength = 2;
+				usb_string_packet.bDescriptorType =
+				    USB_DT_STRING;
+				usb_string_packet.wData[0] = 0x0094;
+
+				/*put packet in fifo */
+				packet_pt = (unsigned char *)&usb_string_packet;
+				break;
+			}
+
+			/*put packet in fifo */
+			for (i = 0; i < (setup_packet.length); i++) {
+				*(unsigned char *)USB2D0_FIFO_0 = packet_pt[i];
+			}
+
+			/*give tx command */
+			*(unsigned short *)USB2D0_INCSR0_8 = 0x0a;
+
+			break;
+
+		case USB_REQ_SET_ADDRESS:
+
+			/*copy usb address */
+			set_value = setup_packet.value;
+
+			break;
+		}
+
+	}
+}
+
+void process_other(unsigned char usb2d0_intrusb)
+{
+
+	/*check for sof */
+	if (usb2d0_intrusb & 0x08) {
+		/*printf("{USB device} - sof detected\n"); */
+	}
+
+	/*check for reset */
+	if (usb2d0_intrusb & 0x04) {
+		/*printf("{USB device} - reset detected\n"); */
+
+		/*copy usb address of zero, need to do this when usb reset */
+		set_value = 0;
+	}
+
+	if (usb2d0_intrusb & 0x02) {
+		/*printf("{USB device} - resume detected\n"); */
+	}
+
+	if (usb2d0_intrusb & 0x01) {
+		/*printf("{USB device} - suspend detected\n"); */
+	}
+}
+
+int usbInt(void)
+{
+	/*Must read these 2 registers and use values to clear interrupts.  If you
+	   do not read them then the interrupt will not be cleared.  If you do not
+	   use the variable the optimizer will not do a read. */
+	volatile unsigned short usb2d0_intrin =
+	    *(unsigned short *)USB2D0_INTRIN_16;
+	volatile unsigned char usb2d0_intrusb =
+	    *(unsigned char *)USB2D0_INTRUSB_8;
+
+	/*check if there was an endpoint interrupt */
+	if (usb2d0_intrin != 0) {
+		process_endpoints(usb2d0_intrin);
+	}
+
+	/*check for other interrupts */
+	if (usb2d0_intrusb != 0) {
+		process_other(usb2d0_intrusb);
+	}
+
+	return 0;
+}
+
+void usb_dev_init()
+{
+#ifdef USB_2_0_DEVICE
+	printf("USB 2.0 Device init\n");
+	/*select 2.0 device */
+	mtsdr(sdr_usb0, 0x0);	/* 2.0 */
+
+	/*usb dev init */
+	*(unsigned char *)USB2D0_POWER_8 = 0xa1;	/* 2.0 */
+#else
+	printf("USB 1.1 Device init\n");
+	/*select 1.1 device */
+	mtsdr(sdr_usb0, 0x2);	/* 1.1 */
+
+	/*usb dev init */
+	*(unsigned char *)USB2D0_POWER_8 = 0xc0;	/* 1.1 */
+#endif
+
+	/*enable interrupts */
+	*(unsigned char *)USB2D0_INTRUSBE_8 = 0x0f;
+
+	irq_install_handler(VECNUM_USBDEV, (interrupt_handler_t *) usbInt,
+			    NULL);
+}
+
+#endif				/*CONFIG_440_EP */