summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/start.S
diff options
context:
space:
mode:
authorPeter Tyser <ptyser@xes-inc.com>2010-04-12 22:28:09 -0500
committerWolfgang Denk <wd@denx.de>2010-04-13 09:13:16 +0200
commit8d1f268204b07e172f3cb5cee0a3974d605b0b98 (patch)
treec3359e920cc886e7060fb099bf933496aca37153 /cpu/ppc4xx/start.S
parent819833af39a91fa1c1e8252862bbda6f5a602f7b (diff)
downloadu-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.zip
u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.gz
u-boot-imx-8d1f268204b07e172f3cb5cee0a3974d605b0b98.tar.bz2
ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
Diffstat (limited to 'cpu/ppc4xx/start.S')
-rw-r--r--cpu/ppc4xx/start.S2170
1 files changed, 0 insertions, 2170 deletions
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
deleted file mode 100644
index 927c88c..0000000
--- a/cpu/ppc4xx/start.S
+++ /dev/null
@@ -1,2170 +0,0 @@
-/*
- * Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
- * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
- * Copyright (C) 2000,2001,2002 Wolfgang Denk <wd@denx.de>
- * Copyright (C) 2007 Stefan Roese <sr@denx.de>, DENX Software Engineering
- * Copyright (c) 2008 Nuovation System Designs, LLC
- * Grant Erickson <gerickson@nuovations.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/*------------------------------------------------------------------------------+
- * This source code is dual-licensed. You may use it under the terms of the
- * GNU General Public License version 2, or under the license below.
- *
- * This source code has been made available to you by IBM on an AS-IS
- * basis. Anyone receiving this source is licensed under IBM
- * copyrights to use it in any way he or she deems fit, including
- * copying it, modifying it, compiling it, and redistributing it either
- * with or without modifications. No license under IBM patents or
- * patent applications is to be implied by the copyright license.
- *
- * Any user of this software should understand that IBM cannot provide
- * technical support for this software and will not be responsible for
- * any consequences resulting from the use of this software.
- *
- * Any person who transfers this source code or any derivative work
- * must include the IBM copyright notice, this paragraph, and the
- * preceding two paragraphs in the transferred software.
- *
- * COPYRIGHT I B M CORPORATION 1995
- * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M
- *-------------------------------------------------------------------------------
- */
-
-/* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards
- *
- *
- * The processor starts at 0xfffffffc and the code is executed
- * from flash/rom.
- * in memory, but as long we don't jump around before relocating.
- * board_init lies at a quite high address and when the cpu has
- * jumped there, everything is ok.
- * This works because the cpu gives the FLASH (CS0) the whole
- * address space at startup, and board_init lies as a echo of
- * the flash somewhere up there in the memorymap.
- *
- * board_init will change CS0 to be positioned at the correct
- * address and (s)dram will be positioned at address 0
- */
-#include <config.h>
-#include <ppc4xx.h>
-#include <timestamp.h>
-#include <version.h>
-
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-#include <asm/ppc4xx-isram.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
-# if (CONFIG_SYS_INIT_DCACHE_CS == 0)
-# define PBxAP PB1AP
-# define PBxCR PB0CR
-# if (defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB0AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB0CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 1)
-# define PBxAP PB1AP
-# define PBxCR PB1CR
-# if (defined(CONFIG_SYS_EBC_PB1AP) && defined(CONFIG_SYS_EBC_PB1CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB1AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB1CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 2)
-# define PBxAP PB2AP
-# define PBxCR PB2CR
-# if (defined(CONFIG_SYS_EBC_PB2AP) && defined(CONFIG_SYS_EBC_PB2CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB2AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB2CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 3)
-# define PBxAP PB3AP
-# define PBxCR PB3CR
-# if (defined(CONFIG_SYS_EBC_PB3AP) && defined(CONFIG_SYS_EBC_PB3CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB3AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB3CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 4)
-# define PBxAP PB4AP
-# define PBxCR PB4CR
-# if (defined(CONFIG_SYS_EBC_PB4AP) && defined(CONFIG_SYS_EBC_PB4CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB4AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB4CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 5)
-# define PBxAP PB5AP
-# define PBxCR PB5CR
-# if (defined(CONFIG_SYS_EBC_PB5AP) && defined(CONFIG_SYS_EBC_PB5CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB5AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB5CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 6)
-# define PBxAP PB6AP
-# define PBxCR PB6CR
-# if (defined(CONFIG_SYS_EBC_PB6AP) && defined(CONFIG_SYS_EBC_PB6CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB6AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB6CR
-# endif
-# endif
-# if (CONFIG_SYS_INIT_DCACHE_CS == 7)
-# define PBxAP PB7AP
-# define PBxCR PB7CR
-# if (defined(CONFIG_SYS_EBC_PB7AP) && defined(CONFIG_SYS_EBC_PB7CR))
-# define PBxAP_VAL CONFIG_SYS_EBC_PB7AP
-# define PBxCR_VAL CONFIG_SYS_EBC_PB7CR
-# endif
-# endif
-# ifndef PBxAP_VAL
-# define PBxAP_VAL 0
-# endif
-# ifndef PBxCR_VAL
-# define PBxCR_VAL 0
-# endif
-/*
- * Memory Bank x (nothingness) initialization CONFIG_SYS_INIT_RAM_ADDR + 64 MiB
- * used as temporary stack pointer for the primordial stack
- */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxAR
-# define CONFIG_SYS_INIT_DCACHE_PBxAR (EBC_BXAP_BME_DISABLED | \
- EBC_BXAP_TWT_ENCODE(7) | \
- EBC_BXAP_BCE_DISABLE | \
- EBC_BXAP_BCT_2TRANS | \
- EBC_BXAP_CSN_ENCODE(0) | \
- EBC_BXAP_OEN_ENCODE(0) | \
- EBC_BXAP_WBN_ENCODE(0) | \
- EBC_BXAP_WBF_ENCODE(0) | \
- EBC_BXAP_TH_ENCODE(2) | \
- EBC_BXAP_RE_DISABLED | \
- EBC_BXAP_SOR_NONDELAYED | \
- EBC_BXAP_BEM_WRITEONLY | \
- EBC_BXAP_PEN_DISABLED)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxAR */
-# ifndef CONFIG_SYS_INIT_DCACHE_PBxCR
-# define CONFIG_SYS_INIT_DCACHE_PBxCR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_INIT_RAM_ADDR) | \
- EBC_BXCR_BS_64MB | \
- EBC_BXCR_BU_RW | \
- EBC_BXCR_BW_16BIT)
-# endif /* CONFIG_SYS_INIT_DCACHE_PBxCR */
-# ifndef CONFIG_SYS_INIT_RAM_PATTERN
-# define CONFIG_SYS_INIT_RAM_PATTERN 0xDEADDEAD
-# endif
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#if (defined(CONFIG_SYS_INIT_RAM_DCACHE) && (CONFIG_SYS_INIT_RAM_END > (4 << 10)))
-#error Only 4k of init-ram is supported - please adjust CONFIG_SYS_INIT_RAM_END!
-#endif
-
-/*
- * Unless otherwise overriden, enable two 128MB cachable instruction regions
- * at CONFIG_SYS_SDRAM_BASE and another 128MB cacheable instruction region covering
- * NOR flash at CONFIG_SYS_FLASH_BASE. Disable all cacheable data regions.
- */
-#if !defined(CONFIG_SYS_FLASH_BASE)
-/* If not already defined, set it to the "last" 128MByte region */
-# define CONFIG_SYS_FLASH_BASE 0xf8000000
-#endif
-#if !defined(CONFIG_SYS_ICACHE_SACR_VALUE)
-# define CONFIG_SYS_ICACHE_SACR_VALUE \
- (PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + ( 0 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_SDRAM_BASE + (128 << 20)) | \
- PPC_128MB_SACR_VALUE(CONFIG_SYS_FLASH_BASE))
-#endif /* !defined(CONFIG_SYS_ICACHE_SACR_VALUE) */
-
-#if !defined(CONFIG_SYS_DCACHE_SACR_VALUE)
-# define CONFIG_SYS_DCACHE_SACR_VALUE \
- (0x00000000)
-#endif /* !defined(CONFIG_SYS_DCACHE_SACR_VALUE) */
-
-#define function_prolog(func_name) .text; \
- .align 2; \
- .globl func_name; \
- func_name:
-#define function_epilog(func_name) .type func_name,@function; \
- .size func_name,.-func_name
-
-/* We don't want the MMU yet.
-*/
-#undef MSR_KERNEL
-#define MSR_KERNEL ( MSR_ME ) /* Machine Check */
-
-
- .extern ext_bus_cntlr_init
-#ifdef CONFIG_NAND_U_BOOT
- .extern reconfig_tlb0
-#endif
-
-/*
- * Set up GOT: Global Offset Table
- *
- * Use r12 to access the GOT
- */
-#if !defined(CONFIG_NAND_SPL)
- START_GOT
- GOT_ENTRY(_GOT2_TABLE_)
- GOT_ENTRY(_FIXUP_TABLE_)
-
- GOT_ENTRY(_start)
- GOT_ENTRY(_start_of_vectors)
- GOT_ENTRY(_end_of_vectors)
- GOT_ENTRY(transfer_to_handler)
-
- GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
- GOT_ENTRY(__bss_start)
- END_GOT
-#endif /* CONFIG_NAND_SPL */
-
-#if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
- /*
- * NAND U-Boot image is started from offset 0
- */
- .text
-#if defined(CONFIG_440)
- bl reconfig_tlb0
-#endif
- GET_GOT
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
- /*
- * 4xx RAM-booting U-Boot image is started from offset 0
- */
- .text
- bl _start_440
-#endif
-
-/*
- * 440 Startup -- on reset only the top 4k of the effective
- * address space is mapped in by an entry in the instruction
- * and data shadow TLB. The .bootpg section is located in the
- * top 4k & does only what's necessary to map in the the rest
- * of the boot rom. Once the boot rom is mapped in we can
- * proceed with normal startup.
- *
- * NOTE: CS0 only covers the top 2MB of the effective address
- * space after reset.
- */
-
-#if defined(CONFIG_440)
-#if !defined(CONFIG_NAND_SPL)
- .section .bootpg,"ax"
-#endif
- .globl _start_440
-
-/**************************************************************************/
-_start_440:
- /*--------------------------------------------------------------------+
- | 440EPX BUP Change - Hardware team request
- +--------------------------------------------------------------------*/
-#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
- sync
- nop
- nop
-#endif
- /*----------------------------------------------------------------+
- | Core bug fix. Clear the esr
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_ESR,r0
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- iccci r0,r0 /* NOTE: operands not used for 440 */
- dccci r0,r0 /* NOTE: operands not used for 440 */
- sync
- li r0,0
- mtspr SPRN_SRR0,r0
- mtspr SPRN_SRR1,r0
- mtspr SPRN_CSRR0,r0
- mtspr SPRN_CSRR1,r0
- /* NOTE: 440GX adds machine check status regs */
-#if defined(CONFIG_440) && !defined(CONFIG_440GP)
- mtspr SPRN_MCSRR0,r0
- mtspr SPRN_MCSRR1,r0
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#endif
-
- /*----------------------------------------------------------------*/
- /* CCR0 init */
- /*----------------------------------------------------------------*/
- /* Disable store gathering & broadcast, guarantee inst/data
- * cache block touch, force load/store alignment
- * (see errata 1.12: 440_33)
- */
- lis r1,0x0030 /* store gathering & broadcast disable */
- ori r1,r1,0x6000 /* cache touch */
- mtspr SPRN_CCR0,r1
-
- /*----------------------------------------------------------------*/
- /* Initialize debug */
- /*----------------------------------------------------------------*/
- mfspr r1,SPRN_DBCR0
- andis. r1, r1, 0x8000 /* test DBCR0[EDM] bit */
- bne skip_debug_init /* if set, don't clear debug register */
- mtspr SPRN_DBCR0,r0
- mtspr SPRN_DBCR1,r0
- mtspr SPRN_DBCR2,r0
- mtspr SPRN_IAC1,r0
- mtspr SPRN_IAC2,r0
- mtspr SPRN_IAC3,r0
- mtspr SPRN_DAC1,r0
- mtspr SPRN_DAC2,r0
- mtspr SPRN_DVC1,r0
- mtspr SPRN_DVC2,r0
-
- mfspr r1,SPRN_DBSR
- mtspr SPRN_DBSR,r1 /* Clear all valid bits */
-skip_debug_init:
-
-#if defined (CONFIG_440SPE)
- /*----------------------------------------------------------------+
- | Initialize Core Configuration Reg1.
- | a. ICDPEI: Record even parity. Normal operation.
- | b. ICTPEI: Record even parity. Normal operation.
- | c. DCTPEI: Record even parity. Normal operation.
- | d. DCDPEI: Record even parity. Normal operation.
- | e. DCUPEI: Record even parity. Normal operation.
- | f. DCMPEI: Record even parity. Normal operation.
- | g. FCOM: Normal operation
- | h. MMUPEI: Record even parity. Normal operation.
- | i. FFF: Flush only as much data as necessary.
- | j. TCS: Timebase increments from CPU clock.
- +-----------------------------------------------------------------*/
- li r0,0
- mtspr SPRN_CCR1, r0
-
- /*----------------------------------------------------------------+
- | Reset the timebase.
- | The previous write to CCR1 sets the timebase source.
- +-----------------------------------------------------------------*/
- mtspr SPRN_TBWL, r0
- mtspr SPRN_TBWU, r0
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup interrupt vectors */
- /*----------------------------------------------------------------*/
- mtspr SPRN_IVPR,r0 /* Vectors start at 0x0000_0000 */
- li r1,0x0100
- mtspr SPRN_IVOR0,r1 /* Critical input */
- li r1,0x0200
- mtspr SPRN_IVOR1,r1 /* Machine check */
- li r1,0x0300
- mtspr SPRN_IVOR2,r1 /* Data storage */
- li r1,0x0400
- mtspr SPRN_IVOR3,r1 /* Instruction storage */
- li r1,0x0500
- mtspr SPRN_IVOR4,r1 /* External interrupt */
- li r1,0x0600
- mtspr SPRN_IVOR5,r1 /* Alignment */
- li r1,0x0700
- mtspr SPRN_IVOR6,r1 /* Program check */
- li r1,0x0800
- mtspr SPRN_IVOR7,r1 /* Floating point unavailable */
- li r1,0x0c00
- mtspr SPRN_IVOR8,r1 /* System call */
- li r1,0x0a00
- mtspr SPRN_IVOR9,r1 /* Auxiliary Processor unavailable */
- li r1,0x0900
- mtspr SPRN_IVOR10,r1 /* Decrementer */
- li r1,0x1300
- mtspr SPRN_IVOR13,r1 /* Data TLB error */
- li r1,0x1400
- mtspr SPRN_IVOR14,r1 /* Instr TLB error */
- li r1,0x2000
- mtspr SPRN_IVOR15,r1 /* Debug */
-
- /*----------------------------------------------------------------*/
- /* Configure cache regions */
- /*----------------------------------------------------------------*/
- mtspr SPRN_INV0,r0
- mtspr SPRN_INV1,r0
- mtspr SPRN_INV2,r0
- mtspr SPRN_INV3,r0
- mtspr SPRN_DNV0,r0
- mtspr SPRN_DNV1,r0
- mtspr SPRN_DNV2,r0
- mtspr SPRN_DNV3,r0
- mtspr SPRN_ITV0,r0
- mtspr SPRN_ITV1,r0
- mtspr SPRN_ITV2,r0
- mtspr SPRN_ITV3,r0
- mtspr SPRN_DTV0,r0
- mtspr SPRN_DTV1,r0
- mtspr SPRN_DTV2,r0
- mtspr SPRN_DTV3,r0
-
- /*----------------------------------------------------------------*/
- /* Cache victim limits */
- /*----------------------------------------------------------------*/
- /* floors 0, ceiling max to use the entire cache -- nothing locked
- */
- lis r1,0x0001
- ori r1,r1,0xf800
- mtspr SPRN_IVLIM,r1
- mtspr SPRN_DVLIM,r1
-
- /*----------------------------------------------------------------+
- |Initialize MMUCR[STID] = 0.
- +-----------------------------------------------------------------*/
- mfspr r0,SPRN_MMUCR
- addis r1,0,0xFFFF
- ori r1,r1,0xFF00
- and r0,r0,r1
- mtspr SPRN_MMUCR,r0
-
- /*----------------------------------------------------------------*/
- /* Clear all TLB entries -- TID = 0, TS = 0 */
- /*----------------------------------------------------------------*/
- addis r0,0,0x0000
-#ifdef CONFIG_SYS_RAMBOOT
- li r4,0 /* Start with TLB #0 */
-#else
- li r4,1 /* Start with TLB #1 */
-#endif
- li r1,64 /* 64 TLB entries */
- sub r1,r1,r4 /* calculate last TLB # */
- mtctr r1
-rsttlb:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 to get EPN */
- rlwinm. r3,r3,0,0xfffffc00 /* Mask EPN */
- beq tlbnxt /* Skip EPN=0 TLB, this is the SDRAM TLB */
-#endif
- tlbwe r0,r4,0 /* Invalidate all entries (V=0)*/
- tlbwe r0,r4,1
- tlbwe r0,r4,2
-tlbnxt: addi r4,r4,1 /* Next TLB */
- bdnz rsttlb
-
- /*----------------------------------------------------------------*/
- /* TLB entry setup -- step thru tlbtab */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_440SPE)
- /*----------------------------------------------------------------*/
- /* We have different TLB tables for revA and rev B of 440SPe */
- /*----------------------------------------------------------------*/
- mfspr r1, PVR
- lis r0,0x5342
- ori r0,r0,0x1891
- cmpw r7,r1,r0
- bne r7,..revA
- bl tlbtabB
- b ..goon
-..revA:
- bl tlbtabA
-..goon:
-#else
- bl tlbtab /* Get tlbtab pointer */
-#endif
- mr r5,r0
- li r1,0x003f /* 64 TLB entries max */
- mtctr r1
- li r4,0 /* TLB # */
-
- addi r5,r5,-4
-1:
-#ifdef CONFIG_SYS_RAMBOOT
- tlbre r3,r4,0 /* Read contents from TLB word #0 */
- rlwinm. r3,r3,0,0x00000200 /* Mask V (valid) bit */
- bne tlbnx2 /* Skip V=1 TLB, this is the SDRAM TLB */
-#endif
- lwzu r0,4(r5)
- cmpwi r0,0
- beq 2f /* 0 marks end */
- lwzu r1,4(r5)
- lwzu r2,4(r5)
- tlbwe r0,r4,0 /* TLB Word 0 */
- tlbwe r1,r4,1 /* TLB Word 1 */
- tlbwe r2,r4,2 /* TLB Word 2 */
-tlbnx2: addi r4,r4,1 /* Next TLB */
- bdnz 1b
-
- /*----------------------------------------------------------------*/
- /* Continue from 'normal' start */
- /*----------------------------------------------------------------*/
-2:
- bl 3f
- b _start
-
-3: li r0,0
- mtspr SPRN_SRR1,r0 /* Keep things disabled for now */
- mflr r1
- mtspr SPRN_SRR0,r1
- rfi
-#endif /* CONFIG_440 */
-
-/*
- * r3 - 1st arg to board_init(): IMMP pointer
- * r4 - 2nd arg to board_init(): boot flag
- */
-#ifndef CONFIG_NAND_SPL
- .text
- .long 0x27051956 /* U-Boot Magic Number */
- .globl version_string
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
-
- . = EXC_OFF_SYS_RESET
- .globl _start_of_vectors
-_start_of_vectors:
-
-/* Critical input. */
- CRIT_EXCEPTION(0x100, CritcalInput, UnknownException)
-
-#ifdef CONFIG_440
-/* Machine check */
- MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#else
- CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
-#endif /* CONFIG_440 */
-
-/* Data Storage exception. */
- STD_EXCEPTION(0x300, DataStorage, UnknownException)
-
-/* Instruction Storage exception. */
- STD_EXCEPTION(0x400, InstStorage, UnknownException)
-
-/* External Interrupt exception. */
- STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
-
-/* Alignment exception. */
- . = 0x600
-Alignment:
- EXCEPTION_PROLOG(SRR0, SRR1)
- mfspr r4,DAR
- stw r4,_DAR(r21)
- mfspr r5,DSISR
- stw r5,_DSISR(r21)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE)
-
-/* Program check exception */
- . = 0x700
-ProgramCheck:
- EXCEPTION_PROLOG(SRR0, SRR1)
- addi r3,r1,STACK_FRAME_OVERHEAD
- EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException,
- MSR_KERNEL, COPY_EE)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
- STD_EXCEPTION(0x900, Decrementer, DecrementerPITException)
- STD_EXCEPTION(0xa00, APU, UnknownException)
-#endif
- STD_EXCEPTION(0xc00, SystemCall, UnknownException)
-
-#ifdef CONFIG_440
- STD_EXCEPTION(0x1300, DataTLBError, UnknownException)
- STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException)
-#else
- STD_EXCEPTION(0x1000, PIT, DecrementerPITException)
- STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException)
- STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException)
-#endif
- CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException )
-
- .globl _end_of_vectors
-_end_of_vectors:
- . = _START_OFFSET
-#endif
- .globl _start
-_start:
-
-/*****************************************************************************/
-#if defined(CONFIG_440)
-
- /*----------------------------------------------------------------*/
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------*/
- li r0,0x0000
- lis r1,0xffff
- mtspr SPRN_DEC,r0 /* prevent dec exceptions */
- mtspr SPRN_TBWL,r0 /* prevent fit & wdt exceptions */
- mtspr SPRN_TBWU,r0
- mtspr SPRN_TSR,r1 /* clear all timer exception status */
- mtspr SPRN_TCR,r0 /* disable all */
- mtspr SPRN_ESR,r0 /* clear exception syndrome register */
- mtxer r0 /* clear integer exception register */
-
- /*----------------------------------------------------------------*/
- /* Debug setup -- some (not very good) ice's need an event*/
- /* to establish control :-( Define CONFIG_SYS_INIT_DBCR to the dbsr */
- /* value you need in this case 0x8cff 0000 should do the trick */
- /*----------------------------------------------------------------*/
-#if defined(CONFIG_SYS_INIT_DBCR)
- lis r1,0xffff
- ori r1,r1,0xffff
- mtspr SPRN_DBSR,r1 /* Clear all status bits */
- lis r0,CONFIG_SYS_INIT_DBCR@h
- ori r0,r0,CONFIG_SYS_INIT_DBCR@l
- mtspr SPRN_DBCR0,r0
- isync
-#endif
-
- /*----------------------------------------------------------------*/
- /* Setup the internal SRAM */
- /*----------------------------------------------------------------*/
- li r0,0
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /* Clear Dcache to use as RAM */
- addis r3,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3,r3,CONFIG_SYS_INIT_RAM_ADDR@l
- addis r4,r0,CONFIG_SYS_INIT_RAM_END@h
- ori r4,r4,CONFIG_SYS_INIT_RAM_END@l
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ran
- addi r5,r5,0x0001
-..d_ran:
- mtctr r5
-..d_ag:
- dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag
-
- /*
- * Lock the init-ram/stack in d-cache, so that other regions
- * may use d-cache as well
- * Note, that this current implementation locks exactly 4k
- * of d-cache, so please make sure that you don't define a
- * bigger init-ram area. Take a look at the lwmon5 440EPx
- * implementation as a reference.
- */
- msync
- isync
- /* 8. set TFLOOR/NFLOOR to 8 (-> 8*16*32 bytes locked -> 4k) */
- lis r1,0x0201
- ori r1,r1,0xf808
- mtspr SPRN_DVLIM,r1
- lis r1,0x0808
- ori r1,r1,0x0808
- mtspr SPRN_DNV0,r1
- mtspr SPRN_DNV1,r1
- mtspr SPRN_DNV2,r1
- mtspr SPRN_DNV3,r1
- mtspr SPRN_DTV0,r1
- mtspr SPRN_DTV1,r1
- mtspr SPRN_DTV2,r1
- mtspr SPRN_DTV3,r1
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
- /* 440EP & 440GR are only 440er PPC's without internal SRAM */
-#if !defined(CONFIG_440EP) && !defined(CONFIG_440GR)
- /* not all PPC's have internal SRAM usable as L2-cache */
-#if defined(CONFIG_440GX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460SX)
- mtdcr L2_CACHE_CFG,r0 /* Ensure L2 Cache is off */
-#elif defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1, 0x0000
- ori r1,r1,0x0008 /* Set L2_CACHE_CFG[RDBW]=1 */
- mtdcr L2_CACHE_CFG,r1
-#endif
-
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM0_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM0_DPC,r1
- mfdcr r1,ISRAM0_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM0_PMEG,r1
-
- lis r1,0x8000 /* BAS = 8000_0000 */
-#if defined(CONFIG_440GX) || defined(CONFIG_440SP)
- ori r1,r1,0x0980 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x8001
- ori r1,r1,0x0980 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x8002
- ori r1,r1, 0x0980 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x8003
- ori r1,r1, 0x0980 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440SPE) || defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r1,0x0000 /* BAS = X_0000_0000 */
- ori r1,r1,0x0984 /* first 64k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0984 /* second 64k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0984 /* third 64k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0984 /* fourth 64k */
- mtdcr ISRAM0_SB3CR,r1
-#if defined(CONFIG_460EX) || defined(CONFIG_460GT)
- lis r2,0x7fff
- ori r2,r2,0xffff
- mfdcr r1,ISRAM1_DPC
- and r1,r1,r2 /* Disable parity check */
- mtdcr ISRAM1_DPC,r1
- mfdcr r1,ISRAM1_PMEG
- and r1,r1,r2 /* Disable pwr mgmt */
- mtdcr ISRAM1_PMEG,r1
-
- lis r1,0x0004 /* BAS = 4_0004_0000 */
- ori r1,r1,0x0984 /* 64k */
- mtdcr ISRAM1_SB0CR,r1
-#endif
-#elif defined(CONFIG_460SX)
- lis r1,0x0000 /* BAS = 0000_0000 */
- ori r1,r1,0x0B84 /* first 128k */
- mtdcr ISRAM0_SB0CR,r1
- lis r1,0x0001
- ori r1,r1,0x0B84 /* second 128k */
- mtdcr ISRAM0_SB1CR,r1
- lis r1, 0x0002
- ori r1,r1, 0x0B84 /* third 128k */
- mtdcr ISRAM0_SB2CR,r1
- lis r1, 0x0003
- ori r1,r1, 0x0B84 /* fourth 128k */
- mtdcr ISRAM0_SB3CR,r1
-#elif defined(CONFIG_440GP)
- ori r1,r1,0x0380 /* 8k rw */
- mtdcr ISRAM0_SB0CR,r1
- mtdcr ISRAM0_SB1CR,r0 /* Disable bank 1 */
-#endif
-#endif /* #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) */
-
- /*----------------------------------------------------------------*/
- /* Setup the stack in internal SRAM */
- /*----------------------------------------------------------------*/
- lis r1,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET@l
- li r0,0
- stwu r0,-4(r1)
- stwu r0,-4(r1) /* Terminate call chain */
-
- stwu r1,-8(r1) /* Save back chain and move SP */
- lis r0,RESET_VECTOR@h /* Address of reset vector */
- ori r0,r0, RESET_VECTOR@l
- stwu r1,-8(r1) /* Save back chain and move SP */
- stw r0,+12(r1) /* Save return addr (underflow vect) */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
- bl board_init_f
-#endif
-
-#endif /* CONFIG_440 */
-
-/*****************************************************************************/
-#ifdef CONFIG_IOP480
- /*----------------------------------------------------------------------- */
- /* Set up some machine state registers. */
- /*----------------------------------------------------------------------- */
- addi r0,r0,0x0000 /* initialize r0 to zero */
- mtspr SPRN_ESR,r0 /* clear Exception Syndrome Reg */
- mttcr r0 /* timer control register */
- mtexier r0 /* disable all interrupts */
- addis r4,r0,0xFFFF /* set r4 to 0xFFFFFFFF (status in the */
- ori r4,r4,0xFFFF /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
- mtexisr r4 /* clear all pending interrupts */
- addis r4,r0,0x8000
- mtexier r4 /* enable critical exceptions */
- addis r4,r0,0x0000 /* assume 403GCX - enable core clk */
- ori r4,r4,0x4020 /* dbling (no harm done on GA and GC */
- mtiocr r4 /* since bit not used) & DRC to latch */
- /* data bus on rising edge of CAS */
- /*----------------------------------------------------------------------- */
- /* Clear XER. */
- /*----------------------------------------------------------------------- */
- mtxer r0
- /*----------------------------------------------------------------------- */
- /* Invalidate i-cache and d-cache TAG arrays. */
- /*----------------------------------------------------------------------- */
- addi r3,0,1024 /* 1/4 of I-cache size, half of D-cache */
- addi r4,0,1024 /* 1/4 of I-cache */
-..cloop:
- iccci 0,r3
- iccci r4,r3
- dccci 0,r3
- addic. r3,r3,-16 /* move back one cache line */
- bne ..cloop /* loop back to do rest until r3 = 0 */
-
- /* */
- /* initialize IOP480 so it can read 1 MB code area for SRAM spaces */
- /* this requires enabling MA[17..0], by default only MA[12..0] are enabled. */
- /* */
-
- /* first copy IOP480 register base address into r3 */
- addis r3,0,0x5000 /* IOP480 register base address hi */
-/* ori r3,r3,0x0000 / IOP480 register base address lo */
-
-#ifdef CONFIG_ADCIOP
- /* use r4 as the working variable */
- /* turn on CS3 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- andi. r4,r4,0xff7f /* make bit 7 = 0 -- CS3 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
-#ifdef CONFIG_DASA_SIM
- /* use r4 as the working variable */
- /* turn on MA17 (LOCCTL.7) */
- lwz r4,0x84(r3) /* LOCTL is at offset 0x84 */
- ori r4,r4,0x80 /* make bit 7 = 1 -- MA17 mode */
- stw r4,0x84(r3) /* LOCTL is at offset 0x84 */
-#endif
-
- /* turn on MA16..13 (LCS0BRD.12 = 0) */
- lwz r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
- andi. r4,r4,0xefff /* make bit 12 = 0 */
- stw r4,0x100(r3) /* LCS0BRD is at offset 0x100 */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* last thing, set local init status done bit (DEVINIT.31) */
- lwz r4,0x80(r3) /* DEVINIT is at offset 0x80 */
- oris r4,r4,0x8000 /* make bit 31 = 1 */
- stw r4,0x80(r3) /* DEVINIT is at offset 0x80 */
-
- /* clear all pending interrupts and disable all interrupts */
- li r4,-1 /* set p1 to 0xffffffff */
- stw r4,0x1b0(r3) /* clear all pending interrupts */
- stw r4,0x1b8(r3) /* clear all pending interrupts */
- li r4,0 /* set r4 to 0 */
- stw r4,0x1b4(r3) /* disable all interrupts */
- stw r4,0x1bc(r3) /* disable all interrupts */
-
- /* make sure above stores all comlete before going on */
- sync
-
- /* Set-up icache cacheability. */
- lis r1, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r1
- isync
-
- /* Set-up dcache cacheability. */
- lis r1, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r1, r1, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r1
-
- addis r1,r0,CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack to SDRAM */
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
-
- GET_GOT /* initialize GOT access */
-
- bl board_init_f /* run first part of init code (from Flash) */
-
-#endif /* CONFIG_IOP480 */
-
-/*****************************************************************************/
-#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || \
- defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \
- defined(CONFIG_405EX) || defined(CONFIG_405)
- /*----------------------------------------------------------------------- */
- /* Clear and set up some registers. */
- /*----------------------------------------------------------------------- */
- addi r4,r0,0x0000
-#if !defined(CONFIG_405EX)
- mtspr SPRN_SGR,r4
-#else
- /*
- * On 405EX, completely clearing the SGR leads to PPC hangup
- * upon PCIe configuration access. The PCIe memory regions
- * need to be guarded!
- */
- lis r3,0x0000
- ori r3,r3,0x7FFC
- mtspr SPRN_SGR,r3
-#endif
- mtspr SPRN_DCWR,r4
- mtesr r4 /* clear Exception Syndrome Reg */
- mttcr r4 /* clear Timer Control Reg */
- mtxer r4 /* clear Fixed-Point Exception Reg */
- mtevpr r4 /* clear Exception Vector Prefix Reg */
- addi r4,r0,(0xFFFF-0x10000) /* set r4 to 0xFFFFFFFF (status in the */
- /* dbsr is cleared by setting bits to 1) */
- mtdbsr r4 /* clear/reset the dbsr */
-
- /* Invalidate the i- and d-caches. */
- bl invalidate_icache
- bl invalidate_dcache
-
- /* Set-up icache cacheability. */
- lis r4, CONFIG_SYS_ICACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_ICACHE_SACR_VALUE@l
- mticcr r4
- isync
-
- /* Set-up dcache cacheability. */
- lis r4, CONFIG_SYS_DCACHE_SACR_VALUE@h
- ori r4, r4, CONFIG_SYS_DCACHE_SACR_VALUE@l
- mtdccr r4
-
-#if !(defined(CONFIG_SYS_EBC_PB0AP) && defined(CONFIG_SYS_EBC_PB0CR))\
- && !defined (CONFIG_XILINX_405)
- /*----------------------------------------------------------------------- */
- /* Tune the speed and size for flash CS0 */
- /*----------------------------------------------------------------------- */
- bl ext_bus_cntlr_init
-#endif
-
-#if !(defined(CONFIG_SYS_INIT_DCACHE_CS) || defined(CONFIG_SYS_TEMP_STACK_OCM))
- /*
- * For boards that don't have OCM and can't use the data cache
- * for their primordial stack, setup stack here directly after the
- * SDRAM is initialized in ext_bus_cntlr_init.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1,r1,CONFIG_SYS_INIT_SP_OFFSET /* set up the stack in SDRAM */
-
- li r0, 0 /* Make room for stack frame header and */
- stwu r0, -4(r1) /* clear final stack frame so that */
- stwu r0, -4(r1) /* stack backtraces terminate cleanly */
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* !(CONFIG_SYS_INIT_DCACHE_CS || !CONFIG_SYS_TEM_STACK_OCM) */
-
-#if defined(CONFIG_405EP)
- /*----------------------------------------------------------------------- */
- /* DMA Status, clear to come up clean */
- /*----------------------------------------------------------------------- */
- addis r3,r0, 0xFFFF /* Clear all existing DMA status */
- ori r3,r3, 0xFFFF
- mtdcr DMASR, r3
-
- bl ppc405ep_init /* do ppc405ep specific init */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE)
-#if defined(CONFIG_405EZ)
- /********************************************************************
- * Setup OCM - On Chip Memory - PPC405EZ uses OCM Controller V2
- *******************************************************************/
- /*
- * We can map the OCM on the PLB3, so map it at
- * CONFIG_SYS_OCM_DATA_ADDR + 0x8000
- */
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_PLBCR1,r3 /* Set PLB Access */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_PLBCR2,r3 /* Set PLB Access */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */
- mtdcr OCM0_DSRC1, r3 /* Set Data Side */
- mtdcr OCM0_ISRC1, r3 /* Set Instruction Side */
- ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */
- mtdcr OCM0_DSRC2, r3 /* Set Data Side */
- mtdcr OCM0_ISRC2, r3 /* Set Instruction Side */
- addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */
- mtdcr OCM0_DISDPC,r3
-
- isync
-#else /* CONFIG_405EZ */
- /********************************************************************
- * Setup OCM - On Chip Memory
- *******************************************************************/
- /* Setup OCM */
- lis r0, 0x7FFF
- ori r0, r0, 0xFFFF
- mfdcr r3, OCM0_ISCNTL /* get instr-side IRAM config */
- mfdcr r4, OCM0_DSCNTL /* get data-side IRAM config */
- and r3, r3, r0 /* disable data-side IRAM */
- and r4, r4, r0 /* disable data-side IRAM */
- mtdcr OCM0_ISCNTL, r3 /* set instr-side IRAM config */
- mtdcr OCM0_DSCNTL, r4 /* set data-side IRAM config */
- isync
-
- lis r3,CONFIG_SYS_OCM_DATA_ADDR@h /* OCM location */
- ori r3,r3,CONFIG_SYS_OCM_DATA_ADDR@l
- mtdcr OCM0_DSARC, r3
- addis r4, 0, 0xC000 /* OCM data area enabled */
- mtdcr OCM0_DSCNTL, r4
- isync
-#endif /* CONFIG_405EZ */
-#endif
-
- /*----------------------------------------------------------------------- */
- /* Setup temporary stack in DCACHE or OCM if needed for SDRAM SPD. */
- /*----------------------------------------------------------------------- */
-#ifdef CONFIG_SYS_INIT_DCACHE_CS
- li r4, PBxAP
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxAR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxAR@l
- mtdcr EBC0_CFGDATA, r4
-
- addi r4, 0, PBxCR
- mtdcr EBC0_CFGADDR, r4
- lis r4, CONFIG_SYS_INIT_DCACHE_PBxCR@h
- ori r4, r4, CONFIG_SYS_INIT_DCACHE_PBxCR@l
- mtdcr EBC0_CFGDATA, r4
-
- /*
- * Enable the data cache for the 128MB storage access control region
- * at CONFIG_SYS_INIT_RAM_ADDR.
- */
- mfdccr r4
- oris r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- mtdccr r4
-
- /*
- * Preallocate data cache lines to be used to avoid a subsequent
- * cache miss and an ensuing machine check exception when exceptions
- * are enabled.
- */
- li r0, 0
-
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
-
- /*
- * Convert the size, in bytes, to the number of cache lines/blocks
- * to preallocate.
- */
- clrlwi. r5, r4, (32 - L1_CACHE_SHIFT)
- srwi r5, r4, L1_CACHE_SHIFT
- beq ..load_counter
- addi r5, r5, 0x0001
-..load_counter:
- mtctr r5
-
- /* Preallocate the computed number of cache blocks. */
-..alloc_dcache_block:
- dcba r0, r3
- addi r3, r3, L1_CACHE_BYTES
- bdnz ..alloc_dcache_block
- sync
-
- /*
- * Load the initial stack pointer and data area and convert the size,
- * in bytes, to the number of words to initialize to a known value.
- */
- lis r1, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r1, r1, CONFIG_SYS_INIT_SP_OFFSET@l
-
- lis r4, (CONFIG_SYS_INIT_RAM_END >> 2)@h
- ori r4, r4, (CONFIG_SYS_INIT_RAM_END >> 2)@l
- mtctr r4
-
- lis r2, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r2, r2, CONFIG_SYS_INIT_RAM_END@l
-
- lis r4, CONFIG_SYS_INIT_RAM_PATTERN@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_PATTERN@l
-
-..stackloop:
- stwu r4, -4(r2)
- bdnz ..stackloop
-
- /*
- * Make room for stack frame header and clear final stack frame so
- * that stack backtraces terminate cleanly.
- */
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- addis r0, 0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-
-#elif defined(CONFIG_SYS_TEMP_STACK_OCM) && \
- (defined(CONFIG_SYS_OCM_DATA_ADDR) && defined(CONFIG_SYS_OCM_DATA_SIZE))
- /*
- * Stack in OCM.
- */
-
- /* Set up Stack at top of OCM */
- lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@h
- ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)@l
-
- /* Set up a zeroized stack frame so that backtrace works right */
- li r0, 0
- stwu r0, -4(r1)
- stwu r0, -4(r1)
-
- /*
- * Set up a dummy frame to store reset vector as return address.
- * this causes stack underflow to reset board.
- */
- stwu r1, -8(r1) /* Save back chain and move SP */
- lis r0, RESET_VECTOR@h /* Address of reset vector */
- ori r0, r0, RESET_VECTOR@l
- stwu r1, -8(r1) /* Save back chain and move SP */
- stw r0, +12(r1) /* Save return addr (underflow vect) */
-#endif /* CONFIG_SYS_INIT_DCACHE_CS */
-
-#ifdef CONFIG_NAND_SPL
- bl nand_boot_common /* will not return */
-#else
- GET_GOT /* initialize GOT access */
-
- bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
- /* NEVER RETURNS! */
- bl board_init_f /* run first part of init code (from Flash) */
-#endif /* CONFIG_NAND_SPL */
-
-#endif /* CONFIG_405GP || CONFIG_405CR || CONFIG_405 || CONFIG_405EP */
- /*----------------------------------------------------------------------- */
-
-
-#ifndef CONFIG_NAND_SPL
-/*
- * This code finishes saving the registers to the exception frame
- * and jumps to the appropriate handler for the exception.
- * Register r21 is pointer into trap frame, r1 has new stack pointer.
- */
- .globl transfer_to_handler
-transfer_to_handler:
- stw r22,_NIP(r21)
- lis r22,MSR_POW@h
- andc r23,r23,r22
- stw r23,_MSR(r21)
- SAVE_GPR(7, r21)
- SAVE_4GPRS(8, r21)
- SAVE_8GPRS(12, r21)
- SAVE_8GPRS(24, r21)
- mflr r23
- andi. r24,r23,0x3f00 /* get vector offset */
- stw r24,TRAP(r21)
- li r22,0
- stw r22,RESULT(r21)
- mtspr SPRG2,r22 /* r1 is now kernel sp */
- lwz r24,0(r23) /* virtual address of handler */
- lwz r23,4(r23) /* where to go when done */
- mtspr SRR0,r24
- mtspr SRR1,r20
- mtlr r23
- SYNC
- rfi /* jump to handler, enable MMU */
-
-int_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SRR0,r2
- mtspr SRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfi
-
-crit_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_CSRR0,r2
- mtspr SPRN_CSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfci
-
-#ifdef CONFIG_440
-mck_return:
- mfmsr r28 /* Disable interrupts */
- li r4,0
- ori r4,r4,MSR_EE
- andc r28,r28,r4
- SYNC /* Some chip revs need this... */
- mtmsr r28
- SYNC
- lwz r2,_CTR(r1)
- lwz r0,_LINK(r1)
- mtctr r2
- mtlr r0
- lwz r2,_XER(r1)
- lwz r0,_CCR(r1)
- mtspr XER,r2
- mtcrf 0xFF,r0
- REST_10GPRS(3, r1)
- REST_10GPRS(13, r1)
- REST_8GPRS(23, r1)
- REST_GPR(31, r1)
- lwz r2,_NIP(r1) /* Restore environment */
- lwz r0,_MSR(r1)
- mtspr SPRN_MCSRR0,r2
- mtspr SPRN_MCSRR1,r0
- lwz r0,GPR0(r1)
- lwz r2,GPR2(r1)
- lwz r1,GPR1(r1)
- SYNC
- rfmci
-#endif /* CONFIG_440 */
-
-
- .globl get_pvr
-get_pvr:
- mfspr r3, PVR
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16 */
-/* Description: Output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16
-out16:
- sth r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out16r */
-/* Description: Byte reverse and output 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl out16r
-out16r:
- sthbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32r */
-/* Description: Byte reverse and output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32r
-out32r:
- stwbrx r4,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16 */
-/* Description: Input 16 bits */
-/*------------------------------------------------------------------------------- */
- .globl in16
-in16:
- lhz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in16r */
-/* Description: Input 16 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in16r
-in16r:
- lhbrx r3,r0,r3
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32r */
-/* Description: Input 32 bits and byte reverse */
-/*------------------------------------------------------------------------------- */
- .globl in32r
-in32r:
- lwbrx r3,r0,r3
- blr
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- * r3 = Relocated stack pointer
- * r4 = Relocated global data pointer
- * r5 = Relocated text pointer
- */
- .globl relocate_code
-relocate_code:
-#if defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * We need to flush the initial global data (gd_t) before the dcache
- * will be invalidated.
- */
-
- /* Save registers */
- mr r9, r3
- mr r10, r4
- mr r11, r5
-
- /* Flush initial global data range */
- mr r3, r4
- addi r4, r4, CONFIG_SYS_GBL_DATA_SIZE@l
- bl flush_dcache_range
-
-#if defined(CONFIG_SYS_INIT_DCACHE_CS)
- /*
- * Undo the earlier data cache set-up for the primordial stack and
- * data area. First, invalidate the data cache and then disable data
- * cacheability for that area. Finally, restore the EBC values, if
- * any.
- */
-
- /* Invalidate the primordial stack and data area in cache */
- lis r3, CONFIG_SYS_INIT_RAM_ADDR@h
- ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l
-
- lis r4, CONFIG_SYS_INIT_RAM_END@h
- ori r4, r4, CONFIG_SYS_INIT_RAM_END@l
- add r4, r4, r3
-
- bl invalidate_dcache_range
-
- /* Disable cacheability for the region */
- mfdccr r3
- lis r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@h
- ori r4, r4, ~PPC_128MB_SACR_VALUE(CONFIG_SYS_INIT_RAM_ADDR)@l
- and r3, r3, r4
- mtdccr r3
-
- /* Restore the EBC parameters */
- li r3, PBxAP
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxAP_VAL@h
- ori r3, r3, PBxAP_VAL@l
- mtdcr EBC0_CFGDATA, r3
-
- li r3, PBxCR
- mtdcr EBC0_CFGADDR, r3
- lis r3, PBxCR_VAL@h
- ori r3, r3, PBxCR_VAL@l
- mtdcr EBC0_CFGDATA, r3
-#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
- /* Restore registers */
- mr r3, r9
- mr r4, r10
- mr r5, r11
-#endif /* defined(CONFIG_4xx_DCACHE) || defined(CONFIG_SYS_INIT_DCACHE_CS) */
-
-#ifdef CONFIG_SYS_INIT_RAM_DCACHE
- /*
- * Unlock the previously locked d-cache
- */
- msync
- isync
- /* set TFLOOR/NFLOOR to 0 again */
- lis r6,0x0001
- ori r6,r6,0xf800
- mtspr SPRN_DVLIM,r6
- lis r6,0x0000
- ori r6,r6,0x0000
- mtspr SPRN_DNV0,r6
- mtspr SPRN_DNV1,r6
- mtspr SPRN_DNV2,r6
- mtspr SPRN_DNV3,r6
- mtspr SPRN_DTV0,r6
- mtspr SPRN_DTV1,r6
- mtspr SPRN_DTV2,r6
- mtspr SPRN_DTV3,r6
- msync
- isync
-#endif /* CONFIG_SYS_INIT_RAM_DCACHE */
-
-#if defined(CONFIG_440EP) || defined(CONFIG_440GR) || \
- defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
- defined(CONFIG_440SP) || defined(CONFIG_440SPE) || \
- defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
- defined(CONFIG_460SX)
- /*
- * On some 440er platforms the cache is enabled in the first TLB (Boot-CS)
- * to speed up the boot process. Now this cache needs to be disabled.
- */
- iccci 0,0 /* Invalidate inst cache */
- dccci 0,0 /* Invalidate data cache, now no longer our stack */
- sync
- isync
-
- /* Clear all potential pending exceptions */
- mfspr r1,SPRN_MCSR
- mtspr SPRN_MCSR,r1
-#ifdef CONFIG_SYS_TLB_FOR_BOOT_FLASH
- addi r1,r0,CONFIG_SYS_TLB_FOR_BOOT_FLASH /* Use defined TLB */
-#else
- addi r1,r0,0x0000 /* Default TLB entry is #0 */
-#endif /* CONFIG_SYS_TLB_FOR_BOOT_FLASH */
- tlbre r0,r1,0x0002 /* Read contents */
- ori r0,r0,0x0c00 /* Or in the inhibit, write through bit */
- tlbwe r0,r1,0x0002 /* Save it out */
- sync
- isync
-#endif /* defined(CONFIG_440EP) || ... || defined(CONFIG_460GT) */
- mr r1, r3 /* Set new stack pointer */
- mr r9, r4 /* Save copy of Init Data pointer */
- mr r10, r5 /* Save copy of Destination Address */
-
- GET_GOT
- mr r3, r5 /* Destination Address */
- lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */
- ori r4, r4, CONFIG_SYS_MONITOR_BASE@l
- lwz r5, GOT(__init_end)
- sub r5, r5, r4
- li r6, L1_CACHE_BYTES /* Cache Line Size */
-
- /*
- * Fix GOT pointer:
- *
- * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address
- *
- * Offset:
- */
- sub r15, r10, r4
-
- /* First our own GOT */
- add r12, r12, r15
- /* then the one used by the C code */
- add r30, r30, r15
-
- /*
- * Now relocate code
- */
-
- cmplw cr1,r3,r4
- addi r0,r5,3
- srwi. r0,r0,2
- beq cr1,4f /* In place copy is not necessary */
- beq 7f /* Protect against 0 count */
- mtctr r0
- bge cr1,2f
-
- la r8,-4(r4)
- la r7,-4(r3)
-1: lwzu r0,4(r8)
- stwu r0,4(r7)
- bdnz 1b
- b 4f
-
-2: slwi r0,r0,2
- add r8,r4,r0
- add r7,r3,r0
-3: lwzu r0,-4(r8)
- stwu r0,-4(r7)
- bdnz 3b
-
-/*
- * Now flush the cache: note that we must start from a cache aligned
- * address. Otherwise we might miss one cache line.
- */
-4: cmpwi r6,0
- add r5,r3,r5
- beq 7f /* Always flush prefetch queue in any case */
- subi r0,r6,1
- andc r3,r3,r0
- mr r4,r3
-5: dcbst 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 5b
- sync /* Wait for all dcbst to complete on bus */
- mr r4,r3
-6: icbi 0,r4
- add r4,r4,r6
- cmplw r4,r5
- blt 6b
-7: sync /* Wait for all icbi to complete on bus */
- isync
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-
- addi r0, r10, in_ram - _start + _START_OFFSET
- mtlr r0
- blr /* NEVER RETURNS! */
-
-in_ram:
-
- /*
- * Relocation Function, r12 point to got2+0x8000
- *
- * Adjust got2 pointers, no need to check for 0, this code
- * already puts a few entries in the table.
- */
- li r0,__got2_entries@sectoff@l
- la r3,GOT(_GOT2_TABLE_)
- lwz r11,GOT(_GOT2_TABLE_)
- mtctr r0
- sub r11,r3,r11
- addi r3,r3,-4
-1: lwzu r0,4(r3)
- cmpwi r0,0
- beq- 2f
- add r0,r0,r11
- stw r0,0(r3)
-2: bdnz 1b
-
- /*
- * Now adjust the fixups and the pointers to the fixups
- * in case we need to move ourselves again.
- */
- li r0,__fixup_entries@sectoff@l
- lwz r3,GOT(_FIXUP_TABLE_)
- cmpwi r0,0
- mtctr r0
- addi r3,r3,-4
- beq 4f
-3: lwzu r4,4(r3)
- lwzux r0,r4,r11
- add r0,r0,r11
- stw r10,0(r3)
- stw r0,0(r4)
- bdnz 3b
-4:
-clear_bss:
- /*
- * Now clear BSS segment
- */
- lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
-
- cmplw 0, r3, r4
- beq 7f
-
- li r0, 0
-
- andi. r5, r4, 3
- beq 6f
- sub r4, r4, r5
- mtctr r5
- mr r5, r4
-5: stb r0, 0(r5)
- addi r5, r5, 1
- bdnz 5b
-6:
- stw r0, 0(r3)
- addi r3, r3, 4
- cmplw 0, r3, r4
- bne 6b
-
-7:
- mr r3, r9 /* Init Data pointer */
- mr r4, r10 /* Destination Address */
- bl board_init_r
-
- /*
- * Copy exception vector code to low memory
- *
- * r3: dest_addr
- * r7: source address, r8: end address, r9: target address
- */
- .globl trap_init
-trap_init:
- mflr r4 /* save link register */
- GET_GOT
- lwz r7, GOT(_start_of_vectors)
- lwz r8, GOT(_end_of_vectors)
-
- li r9, 0x100 /* reset vector always at 0x100 */
-
- cmplw 0, r7, r8
- bgelr /* return if r7>=r8 - just in case */
-1:
- lwz r0, 0(r7)
- stw r0, 0(r9)
- addi r7, r7, 4
- addi r9, r9, 4
- cmplw 0, r7, r8
- bne 1b
-
- /*
- * relocate `hdlr' and `int_return' entries
- */
- li r7, .L_MachineCheck - _start + _START_OFFSET
- li r8, Alignment - _start + _START_OFFSET
-2:
- bl trap_reloc
- addi r7, r7, 0x100 /* next exception vector */
- cmplw 0, r7, r8
- blt 2b
-
- li r7, .L_Alignment - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_ProgramCheck - _start + _START_OFFSET
- bl trap_reloc
-
-#ifdef CONFIG_440
- li r7, .L_FPUnavailable - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_Decrementer - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_APU - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBError - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBError - _start + _START_OFFSET
- bl trap_reloc
-#else /* CONFIG_440 */
- li r7, .L_PIT - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_InstructionTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-
- li r7, .L_DataTLBMiss - _start + _START_OFFSET
- bl trap_reloc
-#endif /* CONFIG_440 */
-
- li r7, .L_DebugBreakpoint - _start + _START_OFFSET
- bl trap_reloc
-
-#if !defined(CONFIG_440)
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtmsr r7 /* change MSR */
-#else
- bl __440_msr_set
- b __440_msr_continue
-
-__440_msr_set:
- addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */
- oris r7,r7,0x0002 /* set CE bit (Critical Exceptions) */
- mtspr SPRN_SRR1,r7
- mflr r7
- mtspr SPRN_SRR0,r7
- rfi
-__440_msr_continue:
-#endif
-
- mtlr r4 /* restore link register */
- blr
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| dcbz_area.
-+----------------------------------------------------------------------------*/
- function_prolog(dcbz_area)
- rlwinm. r5,r4,0,27,31
- rlwinm r5,r4,27,5,31
- beq ..d_ra2
- addi r5,r5,0x0001
-..d_ra2:mtctr r5
-..d_ag2:dcbz r0,r3
- addi r3,r3,32
- bdnz ..d_ag2
- sync
- blr
- function_epilog(dcbz_area)
-#endif /* CONFIG_440 */
-#endif /* CONFIG_NAND_SPL */
-
-/*------------------------------------------------------------------------------- */
-/* Function: in8 */
-/* Description: Input 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl in8
-in8:
- lbz r3,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out8 */
-/* Description: Output 8 bits */
-/*------------------------------------------------------------------------------- */
- .globl out8
-out8:
- stb r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: out32 */
-/* Description: Output 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl out32
-out32:
- stw r4,0x0000(r3)
- blr
-
-/*------------------------------------------------------------------------------- */
-/* Function: in32 */
-/* Description: Input 32 bits */
-/*------------------------------------------------------------------------------- */
- .globl in32
-in32:
- lwz 3,0x0000(3)
- blr
-
-/**************************************************************************/
-/* PPC405EP specific stuff */
-/**************************************************************************/
-#ifdef CONFIG_405EP
-ppc405ep_init:
-
-#ifdef CONFIG_BUBINGA
- /*
- * Initialize EBC chip selects 1 & 4 and GPIO pins (for alternate
- * function) to support FPGA and NVRAM accesses below.
- */
-
- lis r3,GPIO0_OSRH@h /* config GPIO output select */
- ori r3,r3,GPIO0_OSRH@l
- lis r4,CONFIG_SYS_GPIO0_OSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_OSRL@h
- ori r3,r3,GPIO0_OSRL@l
- lis r4,CONFIG_SYS_GPIO0_OSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_OSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_ISR1H@h /* config GPIO input select */
- ori r3,r3,GPIO0_ISR1H@l
- lis r4,CONFIG_SYS_GPIO0_ISR1H@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1H@l
- stw r4,0(r3)
- lis r3,GPIO0_ISR1L@h
- ori r3,r3,GPIO0_ISR1L@l
- lis r4,CONFIG_SYS_GPIO0_ISR1L@h
- ori r4,r4,CONFIG_SYS_GPIO0_ISR1L@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TSRH@h /* config GPIO three-state select */
- ori r3,r3,GPIO0_TSRH@l
- lis r4,CONFIG_SYS_GPIO0_TSRH@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRH@l
- stw r4,0(r3)
- lis r3,GPIO0_TSRL@h
- ori r3,r3,GPIO0_TSRL@l
- lis r4,CONFIG_SYS_GPIO0_TSRL@h
- ori r4,r4,CONFIG_SYS_GPIO0_TSRL@l
- stw r4,0(r3)
-
- lis r3,GPIO0_TCR@h /* config GPIO driver output enables */
- ori r3,r3,GPIO0_TCR@l
- lis r4,CONFIG_SYS_GPIO0_TCR@h
- ori r4,r4,CONFIG_SYS_GPIO0_TCR@l
- stw r4,0(r3)
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB1AP /* program EBC bank 1 for RTC access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB1AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB1CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB1CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB1CR@l
- mtdcr EBC0_CFGDATA,r3
-
- li r3,PB4AP /* program EBC bank 4 for FPGA access */
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4AP@h
- ori r3,r3,CONFIG_SYS_EBC_PB4AP@l
- mtdcr EBC0_CFGDATA,r3
- li r3,PB4CR
- mtdcr EBC0_CFGADDR,r3
- lis r3,CONFIG_SYS_EBC_PB4CR@h
- ori r3,r3,CONFIG_SYS_EBC_PB4CR@l
- mtdcr EBC0_CFGDATA,r3
-#endif
-
- /*
- !-----------------------------------------------------------------------
- ! Check to see if chip is in bypass mode.
- ! If so, write stored CPC0_PLLMR0 and CPC0_PLLMR1 values and perform a
- ! CPU reset Otherwise, skip this step and keep going.
- ! Note: Running BIOS in bypass mode is not supported since PLB speed
- ! will not be fast enough for the SDRAM (min 66MHz)
- !-----------------------------------------------------------------------
- */
- mfdcr r5, CPC0_PLLMR1
- rlwinm r4,r5,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r4,0x1
-
- beq pll_done /* if SSCS =b'1' then PLL has */
- /* already been set */
- /* and CPU has been reset */
- /* so skip to next section */
-
-#ifdef CONFIG_BUBINGA
- /*
- !-----------------------------------------------------------------------
- ! Read NVRAM to get value to write in PLLMR.
- ! If value has not been correctly saved, write default value
- ! Default config values (assuming on-board 33MHz SYS_CLK) are above.
- ! See CPU_DEFAULT_200 and CPU_DEFAULT_266 above.
- !
- ! WARNING: This code assumes the first three words in the nvram_t
- ! structure in openbios.h. Changing the beginning of
- ! the structure will break this code.
- !
- !-----------------------------------------------------------------------
- */
- addis r3,0,NVRAM_BASE@h
- addi r3,r3,NVRAM_BASE@l
-
- lwz r4, 0(r3)
- addis r5,0,NVRVFY1@h
- addi r5,r5,NVRVFY1@l
- cmp cr0,0,r4,r5 /* Compare 1st NVRAM Magic number*/
- bne ..no_pllset
- addi r3,r3,4
- lwz r4, 0(r3)
- addis r5,0,NVRVFY2@h
- addi r5,r5,NVRVFY2@l
- cmp cr0,0,r4,r5 /* Compare 2 NVRAM Magic number */
- bne ..no_pllset
- addi r3,r3,8 /* Skip over conf_size */
- lwz r4, 4(r3) /* Load PLLMR1 value from NVRAM */
- lwz r3, 0(r3) /* Load PLLMR0 value from NVRAM */
- rlwinm r5,r4,1,0x1 /* get system clock source (SSCS) */
- cmpi cr0,0,r5,1 /* See if PLL is locked */
- beq pll_write
-..no_pllset:
-#endif /* CONFIG_BUBINGA */
-
-#ifdef CONFIG_TAIHU
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- addis r5,0,CPLD_REG0_ADDR@h
- ori r5,r5,CPLD_REG0_ADDR@l
- andi. r5, r5, 0x10
- bne _pci_66mhz
-#endif /* CONFIG_TAIHU */
-
-#if defined(CONFIG_ZEUS)
- mfdcr r4, CPC0_BOOT
- andi. r5, r4, CPC0_BOOT_SEP@l
- bne strap_1 /* serial eeprom present */
- lis r3,0x0000
- addi r3,r3,0x3030
- lis r4,0x8042
- addi r4,r4,0x223e
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
- b 1f
-#endif
-
- addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */
- ori r3,r3,PLLMR0_DEFAULT@l /* */
- addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */
- ori r4,r4,PLLMR1_DEFAULT@l /* */
-
-#ifdef CONFIG_TAIHU
- b 1f
-_pci_66mhz:
- addis r3,0,PLLMR0_DEFAULT_PCI66@h
- ori r3,r3,PLLMR0_DEFAULT_PCI66@l
- addis r4,0,PLLMR1_DEFAULT_PCI66@h
- ori r4,r4,PLLMR1_DEFAULT_PCI66@l
- b 1f
-strap_1:
- mfdcr r3, CPC0_PLLMR0
- mfdcr r4, CPC0_PLLMR1
-#endif /* CONFIG_TAIHU */
-
-1:
- b pll_write /* Write the CPC0_PLLMR with new value */
-
-pll_done:
- /*
- !-----------------------------------------------------------------------
- ! Clear Soft Reset Register
- ! This is needed to enable PCI if not booting from serial EPROM
- !-----------------------------------------------------------------------
- */
- addi r3, 0, 0x0
- mtdcr CPC0_SRR, r3
-
- addis r3,0,0x0010
- mtctr r3
-pci_wait:
- bdnz pci_wait
-
- blr /* return to main code */
-
-/*
-!-----------------------------------------------------------------------------
-! Function: pll_write
-! Description: Updates the value of the CPC0_PLLMR according to CMOS27E documentation
-! That is:
-! 1. Pll is first disabled (de-activated by putting in bypass mode)
-! 2. PLL is reset
-! 3. Clock dividers are set while PLL is held in reset and bypassed
-! 4. PLL Reset is cleared
-! 5. Wait 100us for PLL to lock
-! 6. A core reset is performed
-! Input: r3 = Value to write to CPC0_PLLMR0
-! Input: r4 = Value to write to CPC0_PLLMR1
-! Output r3 = none
-!-----------------------------------------------------------------------------
-*/
- .globl pll_write
-pll_write:
- mfdcr r5, CPC0_UCR
- andis. r5,r5,0xFFFF
- ori r5,r5,0x0101 /* Stop the UART clocks */
- mtdcr CPC0_UCR,r5 /* Before changing PLL */
-
- mfdcr r5, CPC0_PLLMR1
- rlwinm r5,r5,0,0x7FFFFFFF /* Disable PLL */
- mtdcr CPC0_PLLMR1,r5
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- mtdcr CPC0_PLLMR0,r3 /* Set clock dividers */
- rlwinm r5,r4,0,0x3FFFFFFF /* Reset & Bypass new PLL dividers */
- oris r5,r5,0x4000 /* Set PLL Reset */
- mtdcr CPC0_PLLMR1,r5 /* Set clock dividers */
- rlwinm r5,r5,0,0xBFFFFFFF /* Clear PLL Reset */
- mtdcr CPC0_PLLMR1,r5
-
- /*
- ! Wait min of 100us for PLL to lock.
- ! See CMOS 27E databook for more info.
- ! At 200MHz, that means waiting 20,000 instructions
- */
- addi r3,0,20000 /* 2000 = 0x4e20 */
- mtctr r3
-pll_wait:
- bdnz pll_wait
-
- oris r5,r5,0x8000 /* Enable PLL */
- mtdcr CPC0_PLLMR1,r5 /* Engage */
-
- /*
- * Reset CPU to guarantee timings are OK
- * Not sure if this is needed...
- */
- addis r3,0,0x1000
- mtspr SPRN_DBCR0,r3 /* This will cause a CPU core reset, and */
- /* execution will continue from the poweron */
- /* vector of 0xfffffffc */
-#endif /* CONFIG_405EP */
-
-#if defined(CONFIG_440)
-/*----------------------------------------------------------------------------+
-| mttlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb3)
- TLBWE(4,3,2)
- blr
- function_epilog(mttlb3)
-
-/*----------------------------------------------------------------------------+
-| mftlb3.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb3)
- TLBRE(3,3,2)
- blr
- function_epilog(mftlb3)
-
-/*----------------------------------------------------------------------------+
-| mttlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb2)
- TLBWE(4,3,1)
- blr
- function_epilog(mttlb2)
-
-/*----------------------------------------------------------------------------+
-| mftlb2.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb2)
- TLBRE(3,3,1)
- blr
- function_epilog(mftlb2)
-
-/*----------------------------------------------------------------------------+
-| mttlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mttlb1)
- TLBWE(4,3,0)
- blr
- function_epilog(mttlb1)
-
-/*----------------------------------------------------------------------------+
-| mftlb1.
-+----------------------------------------------------------------------------*/
- function_prolog(mftlb1)
- TLBRE(3,3,0)
- blr
- function_epilog(mftlb1)
-#endif /* CONFIG_440 */
-
-#if defined(CONFIG_NAND_SPL)
-/*
- * void nand_boot_relocate(dst, src, bytes)
- *
- * r3 = Destination address to copy code to (in SDRAM)
- * r4 = Source address to copy code from
- * r5 = size to copy in bytes
- */
-nand_boot_relocate:
- mr r6,r3
- mr r7,r4
- mflr r8
-
- /*
- * Copy SPL from icache into SDRAM
- */
- subi r3,r3,4
- subi r4,r4,4
- srwi r5,r5,2
- mtctr r5
-..spl_loop:
- lwzu r0,4(r4)
- stwu r0,4(r3)
- bdnz ..spl_loop
-
- /*
- * Calculate "corrected" link register, so that we "continue"
- * in execution in destination range
- */
- sub r3,r7,r6 /* r3 = src - dst */
- sub r8,r8,r3 /* r8 = link-reg - (src - dst) */
- mtlr r8
- blr
-
-nand_boot_common:
- /*
- * First initialize SDRAM. It has to be available *before* calling
- * nand_boot().
- */
- lis r3,CONFIG_SYS_SDRAM_BASE@h
- ori r3,r3,CONFIG_SYS_SDRAM_BASE@l
- bl initdram
-
- /*
- * Now copy the 4k SPL code into SDRAM and continue execution
- * from there.
- */
- lis r3,CONFIG_SYS_NAND_BOOT_SPL_DST@h
- ori r3,r3,CONFIG_SYS_NAND_BOOT_SPL_DST@l
- lis r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@h
- ori r4,r4,CONFIG_SYS_NAND_BOOT_SPL_SRC@l
- lis r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@h
- ori r5,r5,CONFIG_SYS_NAND_BOOT_SPL_SIZE@l
- bl nand_boot_relocate
-
- /*
- * We're running from SDRAM now!!!
- *
- * It is necessary for 4xx systems to relocate from running at
- * the original location (0xfffffxxx) to somewhere else (SDRAM
- * preferably). This is because CS0 needs to be reconfigured for
- * NAND access. And we can't reconfigure this CS when currently
- * "running" from it.
- */
-
- /*
- * Finally call nand_boot() to load main NAND U-Boot image from
- * NAND and jump to it.
- */
- bl nand_boot /* will not return */
-#endif /* CONFIG_NAND_SPL */