Initial revision

1 files changed, 308 insertions, 0 deletions

diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c
new file mode 100644
index 0000000..4541529
--- /dev/null
+++ b/cpu/ppc4xx/speed.c
@@ -0,0 +1,308 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ppc_asm.tmpl>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+/* ------------------------------------------------------------------------- */
+
+#define ONE_BILLION        1000000000
+
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR)
+
+void get_sys_info (PPC405_SYS_INFO * sysInfo)
+{
+	unsigned long pllmr;
+	unsigned long sysClkPeriodPs = ONE_BILLION / (CONFIG_SYS_CLK_FREQ / 1000);
+	uint pvr = get_pvr();
+	unsigned long psr;
+	unsigned long m;
+
+	/*
+	 * Read PLL Mode register
+	 */
+	pllmr = mfdcr (pllmd);
+
+	/*
+	 * Read Pin Strapping register
+	 */
+	psr = mfdcr (strap);
+
+	/*
+	 * Determine FWD_DIV.
+	 */
+	sysInfo->pllFwdDiv = 8 - ((pllmr & PLLMR_FWD_DIV_MASK) >> 29);
+
+	/*
+	 * Determine FBK_DIV.
+	 */
+	sysInfo->pllFbkDiv = ((pllmr & PLLMR_FB_DIV_MASK) >> 25);
+	if (sysInfo->pllFbkDiv == 0) {
+		sysInfo->pllFbkDiv = 16;
+	}
+
+	/*
+	 * Determine PLB_DIV.
+	 */
+	sysInfo->pllPlbDiv = ((pllmr & PLLMR_CPU_TO_PLB_MASK) >> 17) + 1;
+
+	/*
+	 * Determine PCI_DIV.
+	 */
+	sysInfo->pllPciDiv = ((pllmr & PLLMR_PCI_TO_PLB_MASK) >> 13) + 1;
+
+	/*
+	 * Determine EXTBUS_DIV.
+	 */
+	sysInfo->pllExtBusDiv = ((pllmr & PLLMR_EXB_TO_PLB_MASK) >> 11) + 2;
+
+	/*
+	 * Determine OPB_DIV.
+	 */
+	sysInfo->pllOpbDiv = ((pllmr & PLLMR_OPB_TO_PLB_MASK) >> 15) + 1;
+
+	/*
+	 * Check if PPC405GPr used (mask minor revision field)
+	 */
+	if ((pvr & 0xfffffff0) == (PVR_405GPR_RA & 0xfffffff0)) {
+		/*
+		 * Determine FWD_DIV B (only PPC405GPr with new mode strapping).
+		 */
+		sysInfo->pllFwdDivB = 8 - (pllmr & PLLMR_FWDB_DIV_MASK);
+
+		/*
+		 * Determine factor m depending on PLL feedback clock source
+		 */
+		if (!(psr & PSR_PCI_ASYNC_EN)) {
+			if (psr & PSR_NEW_MODE_EN) {
+				/*
+				 * sync pci clock used as feedback (new mode)
+				 */
+				m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllPciDiv;
+			} else {
+				/*
+				 * sync pci clock used as feedback (legacy mode)
+				 */
+				m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllPciDiv;
+			}
+		} else if (psr & PSR_NEW_MODE_EN) {
+			if (psr & PSR_PERCLK_SYNC_MODE_EN) {
+				/*
+				 * PerClk used as feedback (new mode)
+				 */
+				m = 1 * sysInfo->pllFwdDivB * 2 * sysInfo->pllExtBusDiv;
+			} else {
+				/*
+				 * CPU clock used as feedback (new mode)
+				 */
+				m = sysInfo->pllFbkDiv * sysInfo->pllFwdDiv;
+			}
+		} else if (sysInfo->pllExtBusDiv == sysInfo->pllFbkDiv) {
+			/*
+			 * PerClk used as feedback (legacy mode)
+			 */
+			m = 1 * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv * sysInfo->pllExtBusDiv;
+		} else {
+			/*
+			 * PLB clock used as feedback (legacy mode)
+			 */
+			m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivB * sysInfo->pllPlbDiv;
+		}
+
+		sysInfo->freqVCOMhz = (1000000 * m) / sysClkPeriodPs;
+		sysInfo->freqProcessor = (sysInfo->freqVCOMhz * 1000000) / sysInfo->pllFwdDiv;
+		sysInfo->freqPLB = (sysInfo->freqVCOMhz * 1000000) /
+			(sysInfo->pllFwdDivB * sysInfo->pllPlbDiv);
+	} else {
+		/*
+		 * Check pllFwdDiv to see if running in bypass mode where the CPU speed
+		 * is equal to the 405GP SYS_CLK_FREQ. If not in bypass mode, check VCO
+		 * to make sure it is within the proper range.
+		 *    spec:    VCO = SYS_CLOCK x FBKDIV x PLBDIV x FWDDIV
+		 * Note freqVCO is calculated in Mhz to avoid errors introduced by rounding.
+		 */
+		if (sysInfo->pllFwdDiv == 1) {
+			sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ;
+			sysInfo->freqPLB = CONFIG_SYS_CLK_FREQ / sysInfo->pllPlbDiv;
+		} else {
+			sysInfo->freqVCOMhz = ( 1000000 *
+						sysInfo->pllFwdDiv *
+						sysInfo->pllFbkDiv *
+						sysInfo->pllPlbDiv
+				) / sysClkPeriodPs;
+			if (sysInfo->freqVCOMhz >= VCO_MIN
+			    && sysInfo->freqVCOMhz <= VCO_MAX) {
+				sysInfo->freqPLB = (ONE_BILLION /
+						    ((sysClkPeriodPs * 10) /
+						     sysInfo->pllFbkDiv)) * 10000;
+				sysInfo->freqProcessor = sysInfo->freqPLB * sysInfo->pllPlbDiv;
+			} else {
+				printf ("\nInvalid VCO frequency calculated :  %ld MHz \a\n",
+					sysInfo->freqVCOMhz);
+				printf ("It must be between %d-%d MHz \a\n",
+					VCO_MIN, VCO_MAX);
+				printf ("PLL Mode reg           :  %8.8lx\a\n",
+					pllmr);
+				hang ();
+			}
+		}
+	}
+}
+
+
+/********************************************
+ * get_OPB_freq
+ * return OPB bus freq in Hz
+ *********************************************/
+ulong get_OPB_freq (void)
+{
+	ulong val = 0;
+
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB / sys_info.pllOpbDiv;
+
+	return val;
+}
+
+
+/********************************************
+ * get_PCI_freq
+ * return PCI bus freq in Hz
+ *********************************************/
+ulong get_PCI_freq (void)
+{
+	ulong val;
+	PPC405_SYS_INFO sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB / sys_info.pllPciDiv;
+	return val;
+}
+
+
+#elif defined(CONFIG_440)
+void get_sys_info (sys_info_t * sysInfo)
+{
+	unsigned long strp0;
+	unsigned long temp;
+	unsigned long m;
+
+	/* Extract configured divisors */
+	strp0 = mfdcr( cpc0_strp0 );
+	sysInfo->pllFwdDivA = 8 - ((strp0 & PLLSYS0_FWD_DIV_A_MASK) >> 15);
+	sysInfo->pllFwdDivB = 8 - ((strp0 & PLLSYS0_FWD_DIV_B_MASK) >> 12);
+	temp = (strp0 & PLLSYS0_FB_DIV_MASK) >> 18;
+	sysInfo->pllFbkDiv = temp ? temp : 16;
+	sysInfo->pllOpbDiv = 1 + ((strp0 & PLLSYS0_OPB_DIV_MASK) >> 10);
+	sysInfo->pllExtBusDiv = 1 + ((strp0 & PLLSYS0_EPB_DIV_MASK) >> 8);
+
+	/* Calculate 'M' based on feedback source */
+	if( strp0 & PLLSYS0_EXTSL_MASK )
+		m = sysInfo->pllExtBusDiv * sysInfo->pllOpbDiv * sysInfo->pllFwdDivB;
+	else
+		m = sysInfo->pllFbkDiv * sysInfo->pllFwdDivA;
+
+	/* Now calculate the individual clocks */
+	sysInfo->freqVCOMhz = (m * CONFIG_SYS_CLK_FREQ) + (m>>1);
+	sysInfo->freqProcessor = sysInfo->freqVCOMhz/sysInfo->pllFwdDivA;
+	sysInfo->freqPLB = sysInfo->freqVCOMhz/sysInfo->pllFwdDivB;
+    if( get_pvr() == PVR_440GP_RB ) /* Rev B divs an extra 2 -- geez! */
+        sysInfo->freqPLB >>= 1;
+	sysInfo->freqOPB = sysInfo->freqPLB/sysInfo->pllOpbDiv;
+	sysInfo->freqEPB = sysInfo->freqOPB/sysInfo->pllExtBusDiv;
+
+}
+
+ulong get_OPB_freq (void)
+{
+
+	sys_info_t sys_info;
+	get_sys_info (&sys_info);
+	return sys_info.freqOPB;
+}
+
+#elif defined(CONFIG_405)
+
+void get_sys_info (sys_info_t * sysInfo) {
+
+	sysInfo->freqVCOMhz=3125000;
+	sysInfo->freqProcessor=12*1000*1000;
+	sysInfo->freqPLB=50*1000*1000;
+	sysInfo->freqPCI=66*1000*1000;
+
+}
+
+#endif
+
+int get_clocks (void)
+{
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405)
+	DECLARE_GLOBAL_DATA_PTR;
+
+	sys_info_t sys_info;
+
+	get_sys_info (&sys_info);
+	gd->cpu_clk = sys_info.freqProcessor;
+	gd->bus_clk = sys_info.freqPLB;
+
+#endif	/* defined(CONFIG_405GP) || defined(CONFIG_405CR) */
+
+#ifdef CONFIG_IOP480
+	DECLARE_GLOBAL_DATA_PTR;
+
+	gd->cpu_clk = 66000000;
+	gd->bus_clk = 66000000;
+#endif
+	return (0);
+}
+
+
+/********************************************
+ * get_bus_freq
+ * return PLB bus freq in Hz
+ *********************************************/
+ulong get_bus_freq (ulong dummy)
+{
+	ulong val;
+
+#if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_405) || defined(CONFIG_440)
+	sys_info_t sys_info;
+
+	get_sys_info (&sys_info);
+	val = sys_info.freqPLB;
+
+#elif defined(CONFIG_IOP480)
+
+	val = 66;
+
+#else
+# error get_bus_freq() not implemented
+#endif
+
+	return val;
+}