summaryrefslogtreecommitdiff
path: root/cpu/ppc4xx/sdram.c
diff options
context:
space:
mode:
authorStefan Roese <sr@denx.de>2005-11-22 13:20:42 +0100
committerStefan Roese <sr@denx.de>2005-11-22 13:20:42 +0100
commit5568e613ee38d4bb5dd601cdb2f74ed0d7de9902 (patch)
treec89680cfc4931d8e0e3173c27959d678c3cbb44e /cpu/ppc4xx/sdram.c
parentfe126d8b34d2e7c3c2dc1d4e61086018e016768c (diff)
downloadu-boot-imx-5568e613ee38d4bb5dd601cdb2f74ed0d7de9902.zip
u-boot-imx-5568e613ee38d4bb5dd601cdb2f74ed0d7de9902.tar.gz
u-boot-imx-5568e613ee38d4bb5dd601cdb2f74ed0d7de9902.tar.bz2
Add support for Prodrive P3P440 board:
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c - CFG_FLASH_QUIET_TEST added to use the common CFI driver for bank autodetection Patch by Stefan Roese, 22 Nov 2005
Diffstat (limited to 'cpu/ppc4xx/sdram.c')
-rw-r--r--cpu/ppc4xx/sdram.c70
1 files changed, 70 insertions, 0 deletions
diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index d1ad212..e9548cd 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -1,4 +1,7 @@
/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* (C) Copyright 2002-2004
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
*
@@ -39,6 +42,7 @@ struct sdram_conf_s {
typedef struct sdram_conf_s sdram_conf_t;
+#ifndef CFG_SDRAM_TABLE
sdram_conf_t mb0cf[] = {
{(128 << 20), 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */
{(64 << 20), 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */
@@ -46,9 +50,18 @@ sdram_conf_t mb0cf[] = {
{(16 << 20), 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */
{(4 << 20), 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */
};
+#else
+sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE;
+#endif
+
#define N_MB0CF (sizeof(mb0cf) / sizeof(mb0cf[0]))
+#ifndef CONFIG_440
+
+/*
+ * Autodetect onboard SDRAM on 405 platforms
+ */
void sdram_init(void)
{
ulong sdtr1;
@@ -105,4 +118,61 @@ void sdram_init(void)
}
}
+#else /* CONFIG_440 */
+
+/*
+ * Autodetect onboard DDR SDRAM on 440 platforms
+ *
+ * NOTE: Some of the hardcoded values are hardware dependant,
+ * so this should be extended for other future boards
+ * using this routine!
+ */
+long int initdram(int board_type)
+{
+ int i;
+
+ for (i=0; i<N_MB0CF; i++) {
+ /*
+ * Disable memory controller.
+ */
+ mtsdram(mem_cfg0, 0x00000000);
+
+ /*
+ * Setup some default
+ */
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, mb0cf[i].reg);
+ mtsdram(mem_tr0, 0x41094012);
+ mtsdram(mem_tr1, 0x80800800); /* SS=T2 SL=STAGE 3 CD=1 CT=0x00*/
+ mtsdram(mem_rtr, 0x7e000000); /* Interval 15.20µs @ 133MHz PLB*/
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM*/
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*
+ * Enable the controller, then wait for DCEN to complete
+ */
+ mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ udelay(10000);
+
+ if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) {
+ /*
+ * OK, size detected -> all done
+ */
+ return mb0cf[i].size;
+ }
+ }
+
+ return 0; /* nothing found ! */
+}
+
+#endif /* CONFIG_440 */
+
#endif /* CONFIG_SDRAM_BANK0 */