ppc4xx: Enable Primordial Stack for 40x and Unify ECC Handling

This patch (Part 1 of 2):

* Rolls up a suite of changes to enable correct primordial stack and
  global data handling when the data cache is used for such a purpose
  for PPC40x-variants (i.e. CFG_INIT_DCACHE_CS).

* Related to the first, unifies DDR2 SDRAM and ECC initialization by
  eliminating redundant ECC initialization implementations and moving
  redundant SDRAM initialization out of board code into shared 4xx
  code.

* Enables MCSR visibility on the 405EX(r).

* Enables the use of the data cache for initial RAM on
  both AMCC's Kilauea and Makalu and removes a redundant
  CFG_POST_MEMORY flag from each board's CONFIG_POST value.

  - Removed, per Stefan Roese's request, defunct memory.c file for
    Makalu and rolled sdram_init from it into makalu.c.

With respect to the 4xx DDR initialization and ECC unification, there
is certainly more work that can and should be done (file renaming,
etc.). However, that can be handled at a later date on a second or
third pass. As it stands, this patch moves things forward in an
incremental yet positive way for those platforms that utilize this
code and the features associated with it.

Signed-off-by: Grant Erickson <gerickson@nuovations.com>
Signed-off-by: Stefan Roese <sr@denx.de>

1 files changed, 1 insertions, 43 deletions

diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c
index 2724d91..901d650 100644
--- a/cpu/ppc4xx/sdram.c
+++ b/cpu/ppc4xx/sdram.c
@@ -31,6 +31,7 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 #include "sdram.h"
+#include "ecc.h"
 
 #ifdef CONFIG_SDRAM_BANK0
 
@@ -332,49 +333,6 @@ static void sdram_tr1_set(int ram_address, int* tr1_value)
 	*tr1_value = (first_good + last_bad) / 2;
 }
 
-#ifdef CONFIG_SDRAM_ECC
-static void ecc_init(ulong start, ulong size)
-{
-	ulong	current_addr;		/* current byte address */
-	ulong	end_addr;		/* end of memory region */
-	ulong	addr_inc;		/* address skip between writes */
-	ulong	cfg0_reg;		/* for restoring ECC state */
-
-	/*
-	 * TODO: Enable dcache before running this test (speedup)
-	 */
-
-	mfsdram(mem_cfg0, cfg0_reg);
-	mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_GEN);
-
-	/*
-	 * look at geometry of SDRAM (data width) to determine whether we
-	 * can skip words when writing
-	 */
-	if ((cfg0_reg & SDRAM_CFG0_DRAMWDTH) == SDRAM_CFG0_DRAMWDTH_32)
-		addr_inc = 4;
-	else
-		addr_inc = 8;
-
-	current_addr = start;
-	end_addr = start + size;
-
-	while (current_addr < end_addr) {
-		*((ulong *)current_addr) = 0x00000000;
-		current_addr += addr_inc;
-	}
-
-	/*
-	 * TODO: Flush dcache and disable it again
-	 */
-
-	/*
-	 * Enable ecc checking and parity errors
-	 */
-	mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_CHK);
-}
-#endif
-
 /*
  * Autodetect onboard DDR SDRAM on 440 platforms
  *